CNMM120412-HU7 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the HU7 chipbreaker geometry for efficient, reliable turning of steel; order the CNMM120412-HU7 WPP20G insert from Metav Werkzeuge or contact our consultants for application-specific advice. CNMM120412-HU7 WPP20G Drehwendeschneidplatte — Walter Tools, Tiger·tec Gold coated insert for steel turning, rhombic 80° geometry CNMM120412-HU7 WPP20G is a rhombic 80° turning insert designed for steel machining and equipped with the HU7 chipbreaker for controlled chips and stable cutting performance Tiger·tec Gold coating for coated carbide grade Optimised HU7 chipbreaker for stable chips Rhombic 80° geometry for versatile turning Corner radius 1.2 mm for consistent edge strength Consistent performance for steel turning with coated carbide technology The combination of the Tiger·tec Gold coating and the WPP20G grade delivers a balanced mix of wear resistance and toughness for the machining of steel (material group P). The coated carbide substrate is engineered to handle the typical heat and chip formation encountered in steel turning, so the insert provides stable tool life and predictable wear behaviour. With the rhombic 80° form and a corner radius of 1.2 mm, this insert supports both finishing and light roughing operations while maintaining dimensional consistency and surface quality. Reliable chip control and surface quality from HU7 geometry The HU7 chipbreaker is optimised to produce short, consistent chips when cutting steels, reducing interruptions and helping to avoid chip nestling around the workpiece. This controlled chip formation contributes directly to process reliability and a cleaner work environment at the machine. The negative 0° rake (negative geometry) enhances edge strength, allowing the insert to resist chipping under interrupted cuts and thus sustain repeatable surface finish over longer production runs. Geometry and compatibility that aid process stability The insert uses an inscribed circle of 12 mm and a rhombic 80° shape that fits widely used toolholders for turning operations. The plate thickness and tolerance class M ensure mechanical stability in the seat and reproducible clamping, which is essential for high-volume production. The combination of negative rake, robust edge form and the WPP20G grade means the insert is particularly suitable where a compromise between productivity and tool life is required for steel machining applications. Productivity benefits and economical wear behaviour By selecting the CNMM120412-HU7 WPP20G insert, shops can expect a productive machining strategy thanks to the coating technology and chipbreaker pairing: fewer tool changes, consistent results across batches and improved uptime. The insert’s design focuses on reliable chip control, reduced built-up edge risk and consistent cutting edge integrity, which together support shorter cycle times and predictable maintenance intervals. For customers seeking a standardised, repeatable solution for steel turning, this insert offers practical advantages without complicating the tool inventory. For specific machining recommendations and to ensure the best toolholder and parameter selection for the Walter Tools CNMM120412-HU7 WPP20G insert, contact Metav Werkzeuge for tailored technical advice via e‑mail or phone. Technical data Article number: CNMM120412-HU7-WPP20G-WALTER SKU: CNMM120412-HU7-WPP20G-WALTER Label: Drehwendeschneidplatte CNMM120412-HU7 WPP20G Walter Tools Facts Inscribed circle: 12 Corner radius: 1.2 mm Free angle: 0° (negative) Plate form: Rhombus 80° Grade/Series: WPP20G / Tiger·tec Gold Execution / tolerance class: M Special features HU7 chipbreaker Coated carbide grade (WPP20G) Designed for material group P (steel) Tolerances suited for stable clamping and repeatability Negative rake geometry for edge strength FAQ What materials is this insert intended for? The CNMM120412-HU7 WPP20G insert is designed primarily for machining steel (material group P) and is optimised for the thermal and chip-formation characteristics typical of such alloys. How does the HU7 chipbreaker affect machining? The HU7 chipbreaker on the CNMM120412-HU7 WPP20G provides reliable chip control, producing short, manageable chips that enhance process reliability and surface quality during steel turning. Is the Tiger·tec Gold grade suitable for mixed production runs? Yes, the Tiger·tec Gold WPP20G grade offers a balance of wear resistance and toughness, making it suitable for a range of steel applications where both tool life and consistent performance are required. What does the negative 0° rake mean for cutting conditions? The negative 0° rake on this rhombic insert increases edge robustness, improving resistance to chipping on interrupted cuts and supporting stable cutting under heavier engagement. Which toolholders are compatible with the rhombic 80° CNMM insert? The rhombic 80° geometry and 12 inscribed circle of this insert match common turning toolholders designed for CNMM-type inserts; confirm holder seat and clamping dimensions to ensure proper fit and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and is among the world’s leading manufacturers of precision metalcutting tools; protected trademarks and trade names remain the property of their respective owners.
CNMM120416-HU3 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of durable coating, stable chip control and compact geometry for efficient steel turning and predictable tool life; reliable performance reduces changeovers and downtime. Order the CNMM120416-HU3 WPP10G turning insert directly via Metav Werkzeuge or ask our consultants if needed CNMM120416-HU3 WPP10G turning insert for steel, Tiger·tec Gold, rhombic 80° by Walter Tools The CNMM120416-HU3 WPP10G is a rhombic 80° turning insert with negative 0° clearance, designed for general steel machining and engineered to deliver consistent chip control and extended tool life. Tiger·tec Gold coating for improved wear resistance WPP10G grade optimised for steel machining Rhombic 80° insert with 1.6 mm corner radius HU3 chipbreaker for stable chip formation Consistent machining performance through advanced coating The combination of the Tiger·tec Gold coating with the WPP10G carbide grade provides enhanced wear resistance and thermal stability in steel turning operations. This coating technology reduces flank and crater wear under typical steel cutting temperatures, which helps maintain dimensional accuracy over longer tool life. For production environments that demand repeatable part tolerances, the coated carbide minimises variation caused by tool wear and supports stable cutting conditions across batches. Geometry and chip control that improve surface quality The rhombic 80° shape together with a 1.6 mm corner radius and the HU3 chipbreaker creates controllable chip formation and a balanced cutting edge for finishing and semi-finishing passes. The negative 0° clearance geometry increases edge strength and resists chipping during interrupted cuts or hard spots in the workpiece. As a result, users can expect consistent surface finish and fewer scrap parts when machining unalloyed and alloyed steels according to ISO 513 group P. Productivity and economy for workshop and series production Designed for efficient tool utilisation, this indexable insert reduces the frequency of tool changes and machine downtime through predictable wear behaviour. The WPP10G grade is formulated to cover a broad range of steel applications, offering a balanced compromise between toughness and hardness that supports both productive roughing and precise finishing. In a mixed-production shop, this flexibility can lead to lower tooling costs per part and improved overall process reliability. Selection and application guidance for reliable results Key dimensions—12 mm inscribed circle and 4.0 mm thickness—make this insert suitable for standard toolholders matching CNMM-style geometry. The HU3 chipbreaker is optimised for conventional turning of steels; the insert is specified for material group P, which covers unalloyed and alloyed steels. When selecting cutting parameters, favour stable feeds and speeds appropriate for the grade and coating to exploit the insert’s wear-resistance and edge stability. For challenging operations or special steels, consult machining data to adapt cutting conditions and reach the best combination of life and part quality. Contact Metav Werkzeuge for application advice and availability of Walter Tools CNMM120416-HU3 WPP10G; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: CNMM120416-HU3-WPP10G-WALTER SKU: CNMM120416-HU3-WPP10G Designation: CNMM120416-HU3 WPP10G Manufacturer: Walter Tools Product type: Turning insert Series: Tiger-tec Gold Core technical figures Inscribed circle: 12 mm Thickness: 4.0 mm Corner radius: 1.6 mm Clearance angle: 0° (negative) Grade/sort: WPP10G Special features and materials Coating: Tiger·tec Gold Material: Coated carbide Chipbreaker: HU3 Insert form: Rhombic 80° Execution / tolerance class: M Suitable for: Steel (ISO group P) FAQ What workpiece materials is this insert suitable for? The CNMM120416-HU3 WPP10G insert is formulated for ISO group P materials and is suitable for unalloyed and alloyed steel machining. How does the Tiger·tec Gold coating benefit production runs? Tiger·tec Gold on the WPP10G grade improves wear resistance and thermal stability, which extends tool life and helps maintain consistent part quality across production batches. What are the main geometric features to consider when choosing a toolholder? Select a toolholder compatible with CNMM-style rhombic 80° inserts and a 12 mm inscribed circle; ensure the holder supports negative 0° clearance geometry and appropriate clamping for 4.0 mm thick inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM120416-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold wear resistance, an HU3 chipbreaker for stable chip control and a rhombic 80° geometry for versatile steel turning; order directly via Metav Werkzeuge or request tailored advice from our consultants. CNMM120416-HU3 WPP20G Turning insert, rhombic 80°, Tiger‑tec Gold – Walter Tools The CNMM120416-HU3 WPP20G is a rhombic 80° turning insert engineered for steel machining, combining a Tiger‑tec Gold coated carbide grade with an HU3 chipbreaker for reliable production performance Tiger·tec Gold coating for long tool life Optimised chipbreaker HU3 for stable chips Rhombic 80° geometry, 1.6 mm corner radius For steel machining (ISO P) with 0° negative rake Durable coating and material pairing for longer tool life The Tiger·tec Gold coating applied to this indexable insert provides enhanced wear resistance and temperature stability during continuous turning of steels. The coated carbide grade WPP20G is optimised for the thermal and mechanical conditions typical of steel machining (ISO P), which reduces flank and crater wear and extends usable life. This results in fewer tool changes, less downtime and a steadier process window on medium- to high-volume turning operations. The combination of coating and substrate technology supports predictable regrinds and consistent dimensional control across batches. Stable chip formation for safer, more efficient turning The integrated HU3 chipbreaker is designed to produce short, controllable chips when turning steel, improving both surface quality and operator safety. By controlling chip flow and breakage, the insert reduces the risk of entanglement and machine interruptions, which in turn supports higher effective cutting speeds and feed rates. The insert’s rhombic 80° geometry and 1.6 mm corner radius create robust cutting edges that resist edge chipping, offering a balance between strength and edge definition for general-purpose to semi-finishing operations. Geometry and angles that expand application flexibility With a rhombic 80° form and a 0° negative rake, this turning insert suits a wide variety of turning tasks, from longitudinal turning to facing and light profiling, especially where stable engagement and predictable tool behaviour are required. The ISO designation for steel (P) confirms suitability across unalloyed and alloyed steels, delivering a practical solution where versatility and process security are priorities. The insert’s dimensions and thickness code allow integration into many standard CNMM toolholders, simplifying logistics and inventory management. Economic and process benefits in production environments Choosing a coated grade such as WPP20G within the Tiger·tec Gold series supports cost-effective machining through longer tool life and consistent component quality. Fewer interruptions for tool changes and less scrap due to more stable cutting conditions translate into a lower cost per part. The robust design and optimised chip control also ease setup and reduce cycle-time variability, contributing to reliable throughput in both jobbing and serial production contexts. Contact Metav Werkzeuge for a consultation on Walter Tools inserts like the CNMM120416-HU3 WPP20G to specify the right grade for the intended steel application and arrange supply or technical support Technical Data Article number: CNMM120416-HU3-WPP20G-WALTER SKU: CNMM120416-HU3-WPP20G-WALTER Designation: CNMM120416-HU3 WPP20G Facts Material group: P (steel) Grade/series: WPP20G / Tiger·tec Gold Relief angle: 0° (negative) Corner radius: 1.6 mm Inscribed circle / size: 12 Plate thickness code: 04 Special features Chipbreaker: HU3 Plate shape: Rhombus 80° Coating: Tiger·tec Gold (coated carbide) Tolerance class: M Execution: M Suitable for: machining of steel (ISO P) FAQ What materials is this insert suitable for? The Walter Tools CNMM120416-HU3 WPP20G is specified for steel (ISO P), covering unalloyed and alloyed steels where the Tiger·tec Gold grade offers wear resistance and thermal stability. How does the HU3 chipbreaker influence machining? The HU3 chipbreaker on the CNMM120416-HU3 WPP20G controls chip formation to produce shorter, manageable chips, improving surface finish and reducing interruptions during turning. What does the 0° negative rake mean for cutting performance? A 0° negative rake provides a neutral to robust cutting edge suitable for stable engagement and resistance to edge damage, beneficial in general turning operations with the WPP20G grade. Can this insert be used for finishing passes? Yes; the rhombic 80° geometry combined with a 1.6 mm corner radius makes the insert appropriate for light finishing and semi-finishing where rigidity and edge strength are required. Is the CNMM120416-HU3 WPP20G compatible with standard CNMM toolholders? The CNMM form factor and size code are intended for standard CNMM toolholders; verify holder compatibility with insert dimensions before use. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Die Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
CNMM160612-HU3 WPP05G HU3 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coated grade and the HU3 chipbreaker for consistent chip control and extended edge life; the Rhombus 80° geometry with a 1.2 mm corner radius delivers robust cutting performance in steel turning. Order genuine Walter Tools inserts via Metav Werkzeuge or request technical advice from our consultants. CNMM160612-HU3 WPP05G turning insert by Walter Tools — Tiger·tec Gold coated, for steel CNMM160612-HU3 WPP05G is a coated carbide turning insert designed for versatile steel machining applications, combining a resilient cutting edge with controlled chip formation. Tiger·tec Gold coated grade WPP05G Optimised for machining steel (ISO P) Rhombus 80° insert form for flexible turning 1.2 mm corner radius for robust edge Exceptional performance for steel turning with a coated grade The WPP05G grade from the Tiger·tec Gold series is a coated carbide solution optimised for steels according to ISO 513. Its coating technology is aimed at improved wear resistance and consistent edge stability under the heat and chip conditions typical for steel machining. In practice, this means fewer interruptions for insert changes and a predictable tool life, supporting higher utilisation rates on production lathes and reduced total machining cost per part. Geometry and chip control that stabilise the cut The Rhombus 80° form combined with a 0° (negative) relief and the HU3 chipbreaker provides a balance between strength and versatility. The negative relief gives the insert a solid seat in the toolholder and increases edge support, while the HU3 chipbreaker assists in fragmenting and directing chips away from the cutting zone. This results in reliable chip evacuation and reduced risk of re-cutting, which is especially valuable in unattended or high-volume turning operations. Robust edge design for reproducible surface quality A 1.2 mm corner radius delivers a sturdy cutting edge able to withstand interrupted cuts or variations in feed. For semi-finishing and general-purpose turning of steels, this radius helps maintain dimensional stability and good surface integrity over extended runs. The combination of edge geometry and coated substrate supports consistent part-to-part results and reduces the need for frequent requalification of the process. Practical advantages on the shop floor The insert’s insert size 16 and thickness code 06 make it compatible with a wide range of standard CNMM toolholders, enabling rapid replacement and straightforward inventory management. As a factory-new turning indexable insert, the design focuses on repeatable mounting and predictable performance, which helps to shorten setup times and maintain throughput in mixed-batch production. Where this insert adds value in production For component families made from unalloyed or alloyed steel, the CNMM160612-HU3 WPP05G is a pragmatic choice where a combination of tool life, chip control and edge robustness is required. The insert supports tasks from general turning to semi-finishing; its features favour operators and process engineers who prioritise steady productivity, lower tool-change frequency and dependable surface quality. Genuine Walter Tools manufacturing ensures consistent grade allocation and traceability. For tailored recommendations on integrating Walter Tools Tiger·tec Gold inserts into existing turning operations or for availability and delivery options, contact Metav Werkzeuge for expert guidance and local support. Technical data Article number: CNMM160612-HU3-WPP05G-WALTER Product: Drehwendeschneidplatte CNMM160612-HU3 WPP05G Walter Tools Manufacturer: Walter Tools Facts Insert size: 16 Corner radius: 1.2 mm Relief angle: 0° (negative) Thickness code: 06 Tolerance class: M Series: Tiger·tec Gold Special features Grade: WPP05G (coated carbide) Chipbreaker: HU3 Material application: Steel (ISO P) Insert form: Rhombus 80° ISO designation: CNMM160612-HU3 WPP05G FAQ What materials is this insert suitable for? The CNMM160612-HU3 WPP05G insert from Walter Tools is specified for machining steel (ISO P) and is engineered for the heat and chip behaviour typical of steel turning. What does the HU3 chipbreaker do? The HU3 chipbreaker on this turning insert helps control chip formation and evacuation during turning, improving process stability and reducing the chance of chip-related interruptions. Is the insert compatible with standard CNMM toolholders? Yes, the CNMM160612 form and size make the insert compatible with standard toolholders designed for this ISO designation, facilitating quick replacements and uniform clamping. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius provides a robust cutting edge that balances strength and surface quality, making it suitable for general-purpose turning and semi-finishing in steel. Is this an original manufacturer part? This item is an original, factory-new Walter Tools turning insert in the Tiger·tec Gold series, supplied with the specified grade and geometry. Walter AG; Tübingen, Germany. The Walter AG (brand: Walter Tools) with headquarters in Tübingen is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners.
CNMM160612-HU3 WPP10G Wendeplatten - Walter Tools
Benefit from the high wear resistance of the Tiger·tec Gold coating combined with the HU3 chipbreaker and a robust 1.2 mm corner radius for consistent, productive turning of steel; order the CNMM160612-HU3 WPP10G directly via Metav Werkzeuge or consult our application specialists for process optimisation. CNMM160612-HU3 WPP10G turning insert — Tiger·tec Gold coated, 0° negative rake, Walter Tools CNMM160612-HU3 WPP10G is a rhombic 80° turning insert designed for economical and reliable machining of steel in general turning applications Tiger·tec Gold coated carbide grade WPP10G Designed for P group steels and general turning HU3 chipbreaker for consistent chip control Rhombic 80° insert with 1.2 mm corner radius Higher productivity through optimised cutting grade The Tiger·tec Gold WPP10G grade combines a coated carbide substrate with a modern multilayer finish to provide improved tool life and consistent performance when machining steels (ISO group P). The coating technology reduces flank wear and supports higher cutting speeds without compromising edge stability; this results in fewer tool changes and a measurable increase in throughput. Where process reliability is decisive, the combination of a robust grade and a dedicated HU3 chipbreaker delivers predictable chip formation and lower cycle times, supporting a clear cost‑efficiency argument for production environments. Better surface quality and chip control for routine turning The HU3 chipbreaker is engineered to shape and break swarf consistently during turning, which reduces the risk of long, entangling chips and improves operator safety at the machine. In practical terms, the insert’s geometry—an 80° rhombic form with a 0° negative rake—gives a stable cutting edge and helps maintain surface integrity on workpieces. The term chipbreaker refers to a machined or ground feature on the insert that guides chip flow; by controlling chip shape, the insert supports smoother finishes and reduces rework, making it suitable for shops seeking repeatable surface quality across batch runs. Robust edge security and broad steel applicability With a 1.2 mm corner radius and a tolerance class of M, the insert provides a reliable cutting edge for a wide range of turning tasks, from finishing to light roughing in unalloyed and alloyed steels. The negative rake angle enhances edge strength under interrupted cuts and tough cutting conditions, while the specified thickness and inscribed circle dimensions ensure mechanical stability in common toolholders. For customers assessing material compatibility, this insert is targeted at the P material group; that means it is optimised for typical steel heat generation and chip behaviour, offering a balanced compromise between wear resistance and toughness for general workshop and production uses. Choose Walter Tools Tiger·tec Gold inserts for reliable steel turning — contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CNMM160612-HU3-WPP10G-WALTER Article designation: CNMM160612-HU3 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Facts Inscribed circle / size: 16 mm Corner radius: 1.2 mm Thickness: 06 Free rake angle: 0° negative Shape: Rhombic 80° Tolerance class: M Special features Coating: Tiger·tec Gold coated carbide Chipbreaker: HU3 Material group suitability: Steel (ISO P) Application: Turning insert / indexable insert Designation without grade: CNMM160612-HU3 FAQ What materials is this insert suitable for? The CNMM160612-HU3 WPP10G insert is specified for the ISO P group and is optimised for machining various steels, including unalloyed and alloyed grades. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker on this Walter Tools turning insert shapes and breaks chips reliably, improving swarf control and contributing to better surface finish and shorter cycle times. Is the 0° negative rake suitable for interrupted cuts? Yes, the 0° negative rake increases edge strength on the CNMM160612-HU3 insert and is advantageous in interrupted cutting or heavier cutting conditions where increased robustness is required. What does the tolerance class M indicate? Tolerance class M denotes the manufacturing tolerance and dimensional accuracy of the insert; in practice, it ensures consistent mounting and repeatable performance in precision turning setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned exclusively for explanatory purposes. There is no affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
CNMM160612-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of Tiger‑tec Gold wear resistance and a precise Rhombus 80° geometry for steady removal rates and predictable tool life; order the CNMM160612‑HU3 WPP20G indexable inserts directly via Metav Werkzeuge or consult the team for application-specific recommendations. CNMM160612-HU3 WPP20G turning insert — Tiger‑tec Gold, for Stahl turning — Walter Tools The CNMM160612-HU3 WPP20G is a negative Rhombic 80° insert designed for general turning of Stahl; its coated‑carbide grade and HU3 chipbreaker suit a wide range of medium to heavy turning tasks Tiger‑tec Gold coating for reliable wear resistance Rhombus 80° insert profile for versatile turning Corner radius 1.2 mm for controlled chip formation Negative 0° clearance for robust cutting conditions Boosted productivity through consistent wear resistance The coated‑carbide Tiger‑tec Gold grade WPP20G delivers a balance of wear life and toughness that reduces unplanned tool changes. The insert’s coating and substrate combination provide a stable cutting edge, which translates into fewer interruptions and a more predictable process window when machining Stahl. For production environments this means improved cycle‑time stability and a lower cost per component through longer effective tool life and consistent surface quality. Predictable chip control and improved surface results The HU3 chipbreaker combined with a corner radius 1.2 mm helps form shorter, manageable chips and supports steady contact conditions at the tool tip. This geometry is particularly useful when working with medium‑strength steels where controlled chip formation reduces risk of entanglement and supports safer, higher feed rates. As a result, the insert contributes to reliable surface finishes and easier post‑process handling, reducing secondary operations. Robust geometry for demanding cutting conditions A negative 0° clearance and the Rhombus 80° format provide mechanical strength at the cutting edge and improved resistance to impact and radial loads. The insert’s form supports interrupted cuts and heavier depth‑of‑cut scenarios where a positive geometry might chip prematurely. For workshop and manufacturing settings that require dependable, repeatable performance, this indexable solution offers the mechanical stability needed to maintain productivity under variable conditions. Application guidance and material suitability The grade is tailored for the ISO group P, meaning it is optimised for machining Stahl such as unalloyed and alloyed steels. The WPP20G composition emphasises a balance between wear resistance and toughness—classified within the series as generally universal with good wear properties—making it suitable for a range of turning tasks from finishing to medium roughing. Selection of feeds, speeds and cutting depth should follow process trials to match machine rigidity and workpiece characteristics for best results. Contact Metav Werkzeuge for tailored cutting data and to secure the CNMM160612‑HU3 WPP20G inserts from Walter Tools; the team provides quick application advice and delivery options. Technical Data Article number: CNMM160612-HU3-WPP20G-WALTER Designation: CNMM160612-HU3 Grade: WPP20G Series: Tiger‑tec Gold Core measurements Insert size: 16 Thickness: 06 Insert shape: Rhombus 80° Corner radius: 1.2 mm Clearance angle: 0° (negative) Chipbreaker: HU3 Tolerance class: M Execution: M Special features Coated carbide Suitable for ISO group P (Stahl) Robust edge for interrupted cuts General turning applications, finishing to medium roughing FAQ What materials is this insert intended for? The CNMM160612‑HU3 WPP20G insert is specified for ISO group P and is therefore intended primarily for machining Stahl, covering many unalloyed and alloyed steel grades. How does the Tiger‑tec Gold coating benefit production runs? The Tiger‑tec Gold coating on the WPP20G grade improves wear resistance and provides a stable cutting edge, which helps extend tool life and maintain consistent cycle times in production settings. Is this insert suitable for interrupted cuts or heavy radial loads? Yes, the negative 0° clearance and Rhombus 80° geometry give the insert mechanical strength and resistance to impact, making it appropriate for interrupted cuts and more demanding turning conditions. What chip control can be expected with the HU3 chipbreaker? The HU3 chipbreaker with a corner radius of 1.2 mm promotes shorter, controllable chips and steady cutting conditions, supporting improved surface quality and safer chip evacuation during operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Walter Tools is a brand of Walter AG and part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. The mentioned article is an original, factory‑new product of the manufacturer.
CNMM160612-HU3 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold coating, an HU3 chipbreaker tuned for steel and a precise rhombic 80° geometry to maintain stable cutting and predictable tool life; order the CNMM160612-HU3 WPP30G turning insert directly via Metav Werkzeuge or consult our specialists for process integration. CNMM160612-HU3 WPP30G – Turning insert, Tiger·tec Gold coated, rhombic 80° (Walter Tools) The CNMM160612-HU3 WPP30G is a rhombic 80° turning insert optimised for the efficient machining of steel, combining a coated carbide grade with a dedicated chipbreaker for consistent performance. Tiger·tec Gold coated carbide grade Rhombic 80° geometry, 1.2 mm corner radius Optimised chipbreaker HU3 for steel machining Consistent metal removal through optimised cutting geometry The combination of the rhombic 80° form and a 1.2 mm corner radius ensures stable engagement and reliable edge strength during turning operations. This geometry reduces the likelihood of edge chipping while maintaining good access for turning contours; consequently, machining cycles become more predictable and tool changes are less frequent. The positive layout of the insert promotes controlled cutting forces, which is especially beneficial when producing medium to heavy cuts in structural and alloyed steels. Coating and grade engineered for process security A Tiger·tec Gold surface layer on the coated carbide substrate provides improved wear resistance and thermal stability under the typical heat loads of steel machining. The WPP30G grade is formulated for versatile use across ISO P materials, balancing hardness and toughness so that flank wear develops more uniformly. As a result, surface finish and dimensional repeatability are maintained over extended tool life, supporting higher productivity with fewer interruptions. Chip control and machining efficiency with HU3 The dedicated HU3 chipbreaker is configured to form consistent, short chips when cutting steels, lowering the risk of entanglement and improving evacuation in automated and manual set-ups. Better chip control reduces machine downtime and minimises the need for secondary handling, leading to measurable improvements in process throughput. The insert’s negative relief (0° negative rake) contributes to robust cutting edge support for interrupted cuts and unstable clamping conditions. Practical benefits for workshop integration This insert is supplied in the CNMM160612-HU3 format, offering straightforward compatibility with common turning toolholders that accept 16 mm inscribed circle plates. The standard tolerance class M supports interchangeability and repeatable seating, which simplifies tool management in production environments. Given its focus on ISO P materials, the grade is suited to a wide range of steel turning tasks, from batch production to mixed-operation cells, enabling consistent results across workloads. Contact Metav Werkzeuge today for tailored recommendations on integrating Walter Tools turning inserts like the CNMM160612-HU3 WPP30G into existing workflows or to request further technical data and availability Technical data Article number / SKU: CNMM160612-HU3-WPP30G-WALTER Designation: CNMM160612-HU3 WPP30G Product type: Turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Core specifications Inscribed circle / size: 16 Corner radius: 1.2 mm Thickness: 06 Relief angle: 0° (negative) Insert shape: Rhombus 80° Tolerance class: M Materials & features Coating: Tiger·tec Gold Grade: WPP30G (coated carbide) Chipbreaker: HU3 Series: Tiger·tec Gold Material group: P (steel) according to ISO designation FAQ What workpiece materials is this insert suitable for? The CNMM160612-HU3 WPP30G insert is designed primarily for ISO P materials, so it is suitable for unalloyed and alloyed steel machining. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WPP30G grade enhances wear resistance and thermal stability, which helps the insert maintain cutting edge integrity and consistent surface finish over longer tool life. Which chip control can be expected with the HU3 breaker? The HU3 chipbreaker produces short, controlled chips when machining steel, improving evacuation and reducing the risk of chip-related stoppages. Is the insert compatible with standard CNMM toolholders? The CNMM160612-HU3 format follows common CNMM dimensions, allowing use with widely available turning toolholders that accept 16 mm inscribed circle inserts. What benefits does the 1.2 mm corner radius provide in practice? A 1.2 mm corner radius enhances edge robustness for heavier cuts and intermittent cutting, helping to reduce chipping while still delivering acceptable surface finish on machined parts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen. Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the named manufacturers.
CNMM160612-HU5 WMP20G WMP20G Wendeplatten - Walter Tools
Maximise machining reliability with a balance of stable chip control, robust edge life and consistent performance in stainless steels; the coated grade delivers predictable results in medium to robust turning operations. Order the CNMM160612-HU5 WMP20G directly via Metav Werkzeuge or consult our machining specialists for application-specific guidance. CNMM160612-HU5 WMP20G — Rhombic 80° indexable insert, Tiger·tec Gold (Walter Tools) The CNMM160612-HU20G WMP20G is a rhombic 80° indexable turning insert engineered for demanding stainless-steel machining with a focus on secure chip formation and repeatable tool life. Tiger·tec Gold coated grade WMP20G Optimised chip control HU5 chipbreaker Rhombic 80° geometry for versatile turning Corner radius 1.2 mm for stable cutting High repeatability and process security for stainless-steel turning The coated carbide grade WMP20G in the Tiger·tec Gold series combines a wear-resistant surface with a substrate designed for thermal resilience, delivering stable cutting edges when machining stainless steel. The rhombic 80° geometry provides a balanced cutting face and good access for a range of turning operations, while the negative 0° rake increases robustness in interrupted cuts. These design choices reduce the tendency for edge build-up and support predictable component tolerances in series production. Predictable chip control and extended tool life Equipped with the HU5 chipbreaker, the insert promotes controllable chip formation across moderate to robust cutting parameters. The optimised chip flow reduces re-cutting of chips and diminishes heat concentration at the cutting zone, which in turn supports longer effective life of the insert and more stable surface quality on turned parts. The Tiger·tec Gold coating enhances abrasion resistance and helps to maintain a reliable cutting edge under higher temperatures typical for austenitic stainless steels. Geometry that improves on-machine performance The rhombic plate shape with a 1.2 mm corner radius combines strength at the cutting edge with a geometry that suits both finishing and semi-finishing passes. The 06 thickness code and the plate form enable secure clamping in standard toolholders while the negative 0° free angle promotes chip evacuation and reduces sensitivity to workpiece build-up. These features translate into fewer unscheduled tool changes and improved uptime on turning centres. Application scope and economic advantage in production Designed specifically for machining rostfreier Stahl (stainless steel) under medium to robust conditions, the insert supports consistent part quality and reduced scrap rates. Its combination of coating technology and chipbreaker design leads to a favourable cost-per-part in batch production. For process planners, the predictable behaviour of this grade simplifies parameter selection and tool lifecycle planning, contributing to steady productivity in mixed-production environments. For tailored tool allocation or to confirm suitability for specific stainless-steel grades, contact Metav Werkzeuge for expert advice at info@metav-werkzeuge.com or +49 2822 7131930 — personalised application support and supply can be arranged quickly. Technical data Article number: CNMM160612-HU5-WMP20G-WALTER ISO designation: CNMM160612-HU5 WMP20G Type: Drehwendeschneidplatte Manufacturer: Walter Tools UID: CNMM160612-HU5-WMP20G-WALTER Facts Plate size: 16 Corner radius: 1.2 mm Thickness code: 06 Geometry angle: 80° Free cutting angle: 0° (negative) Tolerance class: M Special features Grade: WMP20G Series: Tiger·tec Gold Chipbreaker: HU5 Material suitability: stainless steel Execution: M Plate form: Rhombus 80° Material code: M FAQ What materials is this insert designed for? The CNMM160612-HU5 WMP20G insert is specified for machining stainless steel and is optimised for the M material group, offering secure chip formation on austenitic and similarly tough stainless grades. How does the Tiger·tec Gold series affect tool life? The Tiger·tec Gold coating on this grade improves wear resistance and thermal stability, which helps to extend effective edge life under elevated temperatures commonly encountered when turning rostfreier Stahl. Which chipbreaker is applied and what is its benefit? The HU5 chipbreaker supports controlled chip formation for medium to robust cutting parameters, reducing the risk of long, tangled chips and promoting stable surface finish. What does the 0° (negative) free angle mean for machining? A 0° negative free angle increases edge robustness and reduces sensitivity to built-up edge during interrupted cuts, making the insert suitable for tougher turning conditions. Is this insert suitable for automated turning centres? Yes — the rhombic 80° geometry, standard thickness code and secure clamping characteristics make the insert suitable for use in CNC turning centres where repeatability and predictable tool life are important. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is part of the Walter AG group and is recognised for precision cutting tools and engineered solutions for metalworking; protected trademarks and trade names belong to their respective owners. There is no affiliation between our company and the mentioned brands; the offered item is an original, factory-new product of the manufacturer.
CNMM160612-HU5 WMP20S M Wendeplatten - Walter Tools
Benefit from the combination of reliable edge strength and improved chip control: the Tiger·tec Silver coating paired with the HU5 chipbreaker ensures stable performance in stainless steel. The rhombic 80° geometry and corner radius 1.2 mm support durable cutting edges in medium to robust machining. Order the insert directly via Metav Werkzeuge or consult the technical advisers for application matching. CNMM160612-HU5 WMP20S — Walter Tools indexable turning insert, Tiger·tec Silver for stainless steel The CNMM160612-HU5 WMP20S is an indexable turning insert designed for machining stainless steel under medium to robust conditions, offering a negative 0° rake and a geometry that balances strength with predictable chip formation. Tiger·tec Silver coating for long tool life HU5 chipbreaker for stable chip control For stainless steel (ISO M) machining Rhombic 80° form, 1.2 mm corner radius Consistent process performance with advanced coating The combination of the Tiger·tec Silver coating and the WMP20S grade delivers improved wear resistance and thermal stability, which translates into longer tool life and fewer changes at the machine. In practice this means fewer interruptions in production and a more predictable tool cycle. The coating supports secure chip formation when machining stainless steel, a material group known for toughness and heat sensitivity, reducing the risk of built-up edge and unexpected edge failure. Geometry engineered to protect the cutting edge The rhombic 80° shape with a corner radius 1.2 mm provides a robust edge that resists chipping during interrupted cuts and heavier engagement. The negative 0° rake increases edge stability for demanding turning applications, so the insert sustains higher radial loads without premature deformation. This geometry is particularly beneficial for operations where repeatable dimensional accuracy and surface integrity are required under moderate to heavy cutting conditions. Chip control and machinability for stainless steel The HU5 chipbreaker is tuned for reliable swarf formation with ductile materials; it encourages short, controllable chips that evacuate easily from the cutting zone. Together with the coated carbide grade, the insert reduces thermal and mechanical work on the cutting edge, improving overall process reliability. For shops aiming to enhance throughput, this combination supports consistent cycle times and steady surface quality when working with stainless steel. Integration, handling and application guidance The insert is compatible with standard CNMM toolholders and indexes in typical turning tool systems; the standard designation aligns with common toolholder references for straightforward integration. As an indexable insert, it allows quick corner changes to restore cutting geometry without regrinding, supporting efficient shop-floor practices. For selection advice or to verify holder fitment and corner usage strategies, Metav Werkzeuge can provide technical consultation and application recommendations. Contact Metav Werkzeuge for specification matching and ordering of the Walter Tools CNMM160612-HU5 WMP20S indexable insert with Tiger·tec Silver technology and HU5 chipbreaker. Technical Data SKU: CNMM160612-HU5-WMP20S-WALTER Article designation: CNMM160612-HU5 WMP20S Type: Indexable turning insert Brand: Walter Tools Facts Plate size: 16 Plate thickness: 06 Corner radius: 1.2 mm Free angle: 0° (negative) Special features Grade/series: Tiger·tec Silver Grade/sorte: WMP20S Chipbreaker: HU5 Insert form: Rhombic 80° Suitable for: stainless steel (ISO M) Execution / tolerance class: M FAQ What materials is this insert best suited for? The CNMM160612-HU5 WMP20S insert is designed primarily for stainless steel (ISO M), offering secure chip formation and edge stability in such applications. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver on the WMP20S grade increases thermal resistance and wear performance, extending tool life and supporting consistent surface finish in demanding turns. What role does the HU5 chipbreaker play? The HU5 chipbreaker promotes short, manageable chips and stabilises swarf control, which helps maintain process reliability and reduces the risk of entanglement during turning. Is the insert compatible with standard CNMM toolholders? The insert follows the CNMM designation and is suitable for standard CNMM-compatible toolholders; toolholder specifics should be checked against the tool system in use. Can the insert handle interrupted cuts or heavier engagements? Yes—the rhombic 80° geometry and the 1.2 mm corner radius provide enhanced edge strength, making the insert suitable for interrupted cuts and more robust turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM160612-HU5 WPP10G WPP10G Wendeplatten - Walter Tools
A robust, Tiger·tec Gold coated carbide insert that combines wear resistance and consistent chip control for reliable steel turning; suitable for stable production runs and demanding cuts. Order directly via Metav Werkzeuge or consult our specialists for application support. CNMM160612-HU5 WPP10G - Indexable Turning Insert, Tiger·tec Gold, Walter Tools The CNMM160612-HU5 WPP10G is a rhombic 80° indexable turning insert engineered for steel machining, offering a coated-carbide grade optimised for wear resistance and process stability. Tiger·tec Gold coated carbide Optimised HU5 chipbreaker Rhombus 80° geometry 1.2 mm corner radius for edge stability Increased productivity through proven coating and grade The combination of the Tiger·tec Gold coating and a coated carbide substrate delivers a significant improvement in wear resistance and consistent tool life. The WPP10G grade is developed specifically for machining steel (P) and balances abrasive wear resistance with toughness to withstand long production cycles. Coating technology reduces friction at the cutting edge, which in practice allows for higher cutting speeds and fewer insert changes, translating to tangible cycle-time savings on repetitive turning operations. For process engineers, this means a predictable tool-change interval and improved machine utilisation. Reliable chip control and edge security for stable results The integrated HU5 chipbreaker and Rhombus 80° form support effective chip formation and evacuation under typical steel-cutting conditions. The insert’s 1.2 mm corner radius enhances edge strength and reduces the risk of chipping during depth changes or interrupted cuts. A 0° relief angle (negative) offers a robust cutting edge suited to heavier cuts and applications where a stable edge is preferred over aggressive shear. For operators with limited experience in insert geometry, the chipbreaker design simplifies parameter selection: it moderates chip shape and helps maintain a consistent surface finish across successive components. Practical advantages for workshop integration and setup This indexable insert conforms to the standard designation CNMM160612-HU5 WPP10G, making it compatible with common CNMM toolholders and straightforward to specify in production planning. The size indicator (16) and thickness code (06) align with typical tooling inventories, reducing the need for bespoke holders. The tolerance class M ensures consistent seat fit and repeatability when mounting and indexing inserts. Where material specification lists denote group P, the insert should be selected for unalloyed and alloyed steels; the grade distribution supports a range from wear-prone to tougher steel families. For process optimisation, the insert’s combination of grade and geometry focuses on predictable cutting behaviour and reduced scrap rates. Contact Metav Werkzeuge for available stock and tailored cutting-data recommendations for Walter Tools inserts — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: CNMM160612-HU5-WPP10G-WALTER Designation: CNMM160612-HU5 WPP10G Series: Tiger-tec Gold Brand: Walter Tools Grade: WPP10G Tolerance class: M Core measurements Insert size: 16 Thickness code: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Plate form: Rhombus 80° Materials & features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: HU5 Suitable for: Steel (P) Execution: M ISO designation: CNMM160612-HU5 WPP10G FAQ Is this insert suitable for machining steel? Yes. The CNMM160612-HU5 WPP10G is specified for the ISO group P and is optimised for unalloyed and alloyed steels using the Tiger·tec Gold coated-carbide grade. What advantages does the HU5 chipbreaker offer? The HU5 chipbreaker promotes reliable chip formation and evacuation in steel turning, supporting consistent surface quality and reducing the risk of long, entangling chips. What are the key dimensions and tolerance of the insert? The insert has a size designation of 16, thickness code 06, a 1.2 mm corner radius, and tolerance class M; these values provide repeatable seating and edge security when re-indexing. Can this insert handle interrupted cuts or heavier depths of cut? Yes. The 0° relief angle (negative) and the robust geometry provide a resilient cutting edge suitable for interrupted cuts and more demanding turning conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer Walter Tools.
CNMM160612-HU5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from high productivity and consistent tool life thanks to the Tiger‑tec Gold coating and the HU5 chipbreaker, combined with the robust 80° rhombic geometry and 1.2 mm corner radius; order the insert directly via Metav Werkzeuge or consult our specialists for application support. CNMM160612-HU5 WPP20G – Turning insert, Tiger‑tec Gold coating, HU5 chipbreaker, for steel | Walter Tools The CNMM160612-HU5 WPP20G is a negative‑rake rhombic 80° turning insert designed for efficient steel turning with stable chip control and predictable tool life Tiger‑tec Gold coated carbide Optimised HU5 chipbreaker Rhombic 80° form, 1.2 mm radius Negative 0° rake for robust cuts Increased productivity for demanding steel turning The Tiger‑tec Gold grade delivers a coated carbide system that is optimised for the thermal and mechanical stresses of steel machining, which means longer tool life and fewer interruptions. The grade WPP20G is tuned for a balance between wear resistance and toughness, suitable for a wide range of steels according to ISO 513. By choosing this geometry and coating combination, shops achieve more consistent cycle times and reduced tool consumption, contributing directly to improved process efficiency and predictable output. Reliable chip control and surface finish with engineered geometry The integrated HU5 chipbreaker and the rhombic 80° form ensure stable chip formation under typical turning conditions, reducing the risk of built‑up edge and tool vibration. A 1.2 mm corner radius supports edge strength for medium to heavy cuts while maintaining an acceptable surface quality, so operators obtain both robust cutting performance and good part finish. The negative 0° rake characteristic provides additional security for interrupted cuts and unstable workpiece set‑ups, making this insert appropriate where durability is prioritised. Simple integration, broad material applicability and cost efficiency This insert is supplied in the common CNMM format, which facilitates quick toolholder compatibility and reduces inventory complexity. The WPP20G grade is particularly suited to machining steel (designation P), offering broad applicability across unalloyed and alloyed steels encountered in general engineering. Using a coated, high‑performance insert reduces re‑grinding cycles and tool change frequency, which lowers indirect production costs and improves uptime — a pragmatic advantage for both job shops and production lines. For tailored selection advice or to purchase the Walter Tools CNMM160612‑HU5 WPP20G insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: CNMM160612-HU5-WPP20G-WALTER Product name: CNMM160612-HU5 WPP20G Product type: Turning insert Brand: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Numbers / Core Technical Data Corner radius: 1.2 mm Insert size: 16 (CNMM 16) Plate thickness: 06 Free angle: 0° (negative) Tolerance class: M Designs / Special features Chipbreaker: HU5 Shape: Rhombus 80° Coating / material: coated carbide (Tiger·tec Gold) Application group: steel (P) Execution: M FAQ What materials is this insert intended for? The CNMM160612‑HU5 WPP20G insert from Walter Tools is designed primarily for steel (ISO group P) and is optimised for the typical heat and chip behaviour encountered when machining such materials. How does the HU5 chipbreaker help in practice? The HU5 chipbreaker, as used on this Walter Tools turning insert, produces predictable chip shapes that reduce the likelihood of entanglement and improve surface integrity while enabling stable cutting at a variety of cutting parameters. Is the insert suitable for interrupted cuts or roughing operations? Yes, the negative 0° rake and the 1.2 mm corner radius make the insert robust for interrupted cuts and medium to heavy roughing, giving reliable edge strength for demanding operations. Which toolholders are compatible with the CNMM designation? CNMM‑format inserts are widely supported by standard turning toolholder systems; the CNMM160612‑HU5 WPP20G will fit holders designed for CNMM 16 inserts and can be integrated without special adapters in most conventional toolposts Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM160612-HU5 WSM30S HU5 Wendeplatten - Walter Tools
Efficient chip control and a Tiger·tec Silver coating deliver consistent performance when machining stainless steels and heat-resistant alloys; combined with the HU5 chipbreaker and a 1.2 mm corner radius, the insert supports reliable edge life and improved surface quality. Order the CNMM160612-HU5 WSM30S directly via Metav Werkzeuge or consult our specialists for tailored application advice. CNMM160612-HU5 WSM30S — Indexable turning insert, Tiger·tec Silver, HU5 chipbreaker (Walter Tools) The CNMM160612-HU5 WSM30S is an indexable turning insert engineered for demanding turning tasks in stainless steels and heat-resistant superalloys, offering robust edge stability and controlled chip formation for industrial turning applications Tiger·tec Silver coating, heat-resistant HU5 chipbreaker for stable chip control Rhombic 80° geometry for flexible turning Corner radius 1.2 mm for reliable finishes High-temperature performance and cutting stability for demanding materials The coated carbide grade WSM30S, part of the Tiger·tec Silver series, is formulated for temperature resistance and stable cutting edges when machining stainless steels and superalloys. The combination of a coated carbide body and a specialised HU5 chipbreaker ensures secure chip formation under thermal stress; chipbreakers shape and break chips close to the cutting zone, which reduces the risk of built-up edge and improves process security. The insert’s negative 0° free angle promotes a robust cutting edge suitable for interrupted cuts and higher feed rates, while the rhombic 80° geometry permits versatile approach angles across common turning operations. Process benefits: longer tool life and consistent surface quality A corner radius of 1.2 mm delivers a balance between strength and finish: the larger radius distributes cutting forces, reducing edge wear and supporting repeatable surface integrity on challenging materials. The insert’s form and a 6 mm thickness provide rigidity that minimises vibration and deflection in heavy-duty cuts, thereby extending service life and lowering tooling costs per part. Tolerance class M and execution M indicate consistent manufacturing tolerances, which supports predictable tool-holder set-up and interchangeability across tool systems. These characteristics translate into measurable productivity gains and fewer interruptions for tool changes in serial production. Practical application and handling for workshop integration In routine shop-floor applications the indexable design allows quick indexing to a fresh cutting edge, reducing downtime and inventory complexity compared with brazed tools. The CNMM160612-HU5 WSM30S is particularly suitable for turning operations where thermal load and material toughness challenge edge durability, for example components in the medical, aerospace and energy sectors made from stainless steels or nickel-based alloys. The HU5 chipbreaker is effective at producing short, controllable chips at appropriate feeds, lowering the need for secondary chip control measures. For specification checks or to confirm compatibility with specific toolholders, technical guidance is available from Metav Werkzeuge’s application specialists. Contact Metav Werkzeuge for tailored application advice on Walter Tools’ CNMM160612-HU5 WSM30S and to check availability – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CNMM160612-HU5-WSM30S-WALTER Label: Drehwendeschneidplatte CNMM160612-HU5 WSM30S Walter Tools Designation: CNMM160612-HU5 ISO designation: CNMM160612-HU5 WSM30S Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Key measurements Inscribed circle / size: 16 mm Thickness: 6 mm Corner radius: 1.2 mm Free cutting angle: 0° (negative) Tolerance class: M Materials & features Series: Tiger·tec Silver Grade: WSM30S (coated carbide) Chipbreaker: HU5 Plate form: Rhombus 80° Execution: M Suitable for: stainless steels (M), heat-resistant superalloys and titanium (S) FAQ What materials is this insert suitable for? The CNMM160612-HU5 WSM30S is designed for stainless steels (M) and for heat-resistant superalloys and titanium (S), leveraging the Tiger·tec Silver coating for thermal stability. How does the HU5 chipbreaker affect machining? The HU5 chipbreaker on this turning insert promotes short, controllable chips and consistent chip evacuation, which supports safer turning cycles and improved surface finish. What does the 0° negative free cutting angle mean in practice? A 0° negative free angle provides a robust cutting edge that tolerates interrupted cuts and higher radial loads, making the insert suitable for demanding turning operations. Is this insert compatible with quick indexation workflows? As an indexable turning insert, the CNMM160612-HU5 WSM30S allows rapid indexing to a fresh cutting edge, reducing set-up time and tool change frequency in production environments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM160612-HU7 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a 1.2 mm corner radius and sturdy Rhombus 80° geometry to achieve stable chip control and extended tool life in steel turning operations; order directly via Metav Werkzeuge or consult their experts for application support. CNMM160612-HU7 WPP10G Rhombic 80° Turning Insert, Tiger·tec Gold for Steel — Walter Tools A CNMM160612-HU7 WPP10G indexable turning insert engineered for reliable steel machining, offering a wear-resistant Tiger·tec Gold grade and geometry optimised for stable cutting. Tiger·tec Gold coated, wear-resistant Designed for steel (ISO group P) Rhombic 80° geometry, 1.2 mm corner radius 0° negative relief for stable machining Longer tool life through advanced coating and grade The combination of Tiger·tec Gold technology and the WPP10G grade delivers enhanced wear resistance and consistent edge stability when machining a wide range of steels. The insert’s coated carbide composition is designed to withstand the thermal and mechanical demands typical of steel cutting, reducing flank wear and maintaining cutting-edge integrity over longer cycles. This results in fewer indexings, lower tool-change times and improved process economy without compromising surface quality. Geometry and edge design for precision turning The Rhombus 80° form and 1.2 mm corner radius provide a versatile balance between robustness and finishing capability. With a 0° negative relief the insert offers a rigid cutting edge that resists deflection under higher feed rates, supporting stable metal removal and repeatable dimensions. The HU7 chipbreaker further aids controlled chip formation for predictable evacuation, which simplifies process setup and helps achieve consistent surface finish on turned parts. Wide applicability and dependable process security Classified for steel (ISO group P), this insert covers both universal and tougher steel applications thanks to its graded toughness and coating synergy. The tolerance class M and the standard dimensions ensure compatibility with common toolholders using CNMM format, enabling quick integration into existing turning cells. The result is a practical, productivity-oriented solution for batch and continuous production where tool life, reproducible results and efficient chip control are priorities. Contact Metav Werkzeuge for tailored application advice and to request CNMM160612-HU7 WPP10G inserts from Walter Tools Technical Data Article number: CNMM160612-HU7-WPP10G-WALTER Label: Drehwendeschneidplatte CNMM160612-HU7 WPP10G Walter Tools Manufacturer: Walter Tools Facts Size: 16 Thickness: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: HU7 Geometry: Rhombus 80° Material application: Steel (ISO group P) FAQ What materials is this insert suitable for? This insert is specified for steel machining (ISO group P) and the WPP10G grade is optimised for typical steel heat generation and chip behaviour. How does the Tiger·tec Gold coating benefit performance? The Tiger·tec Gold coating on the WPP10G grade improves wear resistance and edge stability, extending service life and maintaining cutting performance under demanding conditions. What effect does the 1.2 mm corner radius have on results? A 1.2 mm corner radius increases edge strength for tougher cuts while still allowing acceptable surface finishes for many turning tasks. Is the HU7 chipbreaker suitable for finishing and roughing? The HU7 chipbreaker provides controlled chip formation that supports a range of cutting conditions; it aids evacuation and process reliability in both moderate roughing and finishing operations. Which toolholders accept this insert form? The CNMM format and Rhombus 80° geometry match standard turning toolholders designed for this insert type, enabling straightforward integration into conventional turning setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the mentioned brands; the offered item is an original, brand-new product supplied by the manufacturer.
CNMM160612-HU7 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a dedicated HU7 chipbreaker to improve tool life and process reliability in steel turning; order directly via Metav Werkzeuge or consult the team for machining parameters and holder compatibility. CNMM160612-HU7 WPP20G indexable turning insert, Tiger·tec Gold — Walter Tools The CNMM160612-HU7 WPP20G is a rhombic 80° indexable insert engineered for steel turning operations, combining a robust 1.2 mm corner radius with a Tiger·tec Gold coated carbide grade for extended wear resistance. Tiger·tec Gold coated carbide grade Rhombic 80° insert, 0° negative rake 1.2 mm corner radius for robust edge strength Optimised for steel machining (ISO P) Longer life through advanced coating and grade The Tiger·tec Gold technology used in this grade (WPP20G) provides a coated carbide formulation tuned for the thermal and tribological demands of steel cutting (ISO P). As a result, the insert delivers reduced flank wear and more consistent tool life under typical turning speeds, which translates into fewer tool changes and less machine downtime. The coated surface improves adhesion resistance and permits a broader range of cutting conditions while retaining predictable performance. Reliable chip control and consistent surface quality The integrated HU7 chipbreaker has been developed specifically for steel applications and promotes controlled chip formation across a wide range of feeds. Combined with the Rhombic 80° shape and 0° negative rake, this configuration offers stable cutting forces and improved process security during general turning and semi-finishing. The outcome is more repeatable part appearance and reduced risk of chip-related interruptions. Stable edge and mechanical robustness for productive cutting A 1.2 mm corner radius enhances edge strength and resistance to chipping, especially under interrupted cuts or moderate radial engagements. The insert dimensioning (16 mm nominal size, designation CNMM160612-HU7) and tolerance class M support precise seating in standard CNMM toolholders, ensuring accurate positioning and secure clamping. These mechanical attributes help maintain cutting stability, allowing higher metal removal rates without compromising component integrity. Practical application and machining guidance Designed primarily for steel, the grade distributes the balance between wear resistance and toughness to address both routine and demanding turning tasks. The coated indexable plate suits a range of operations from roughing to modest finishing when paired with appropriate feeds and cutting speeds. For specific cutting data, toolholder compatibility or optimisation strategies, Metav Werkzeuge provides application support and can advise on feed and speed windows aligned with the chosen machine and workpiece grade. For high-productivity steel turning with Tiger·tec Gold, contact Metav Werkzeuge for tailored recommendations and holder compatibility: info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: CNMM160612-HU7-WPP20G-WALTER Designation: CNMM160612-HU7 Full designation: CNMM160612-HU7 WPP20G Manufacturer: Walter Tools Product type: Indexable turning insert Facts Size: 16 Corner radius: 1.2 mm Relief/rake angle: 0° (negative) Geometry: Rhombic 80° Grade: WPP20G Tolerance class: M Thickness: 06 Special features Series: Tiger·tec Gold Coating/grade: WPP20G (coated carbide) Chipbreaker: HU7 Material application: Steel (ISO P) Suitability: general turning and semi-finishing Brand: Walter Tools FAQ What materials is this insert intended to machine? This CNMM160612-HU7 WPP20G insert is optimised for steel machining (ISO P) and the WPP20G grade is balanced for the heat and chip formation characteristics typical of steels. How does the HU7 chipbreaker affect performance? The HU7 chipbreaker promotes controlled chip formation in steel, improving process stability and helping to maintain consistent surface finish when using the CNMM160612-HU7 WPP20G insert. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP20G grade enhances wear resistance and thermal stability, extending tool life and enabling a wider window of cutting conditions for more productive turning. Is the insert suitable for interrupted cuts? Yes, the 1.2 mm corner radius and the negative rake geometry provide added edge strength and robustness for intermittent engagements with greater resistance to chipping. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are used here solely for explanation and product identification. There is no affiliation between our company and the mentioned brands. The item offered is an original, factory-new product of the manufacturer, Walter Tools.
CNMM160612-HU7 WPP30G Wendeplatten - Walter Tools
Benefit from the combination of a Tiger·tec Gold coating and the HU7 chipbreaker for consistent chip control and longer tool life; the rhombic 80° geometry and 1.2 mm corner radius provide robust edge strength for reliable turning of steel. Order the inserts directly via Metav Werkzeuge or consult our specialists for process recommendations. CNMM160612-HU7 WPP30G Turning Insert for Steel — Walter Tools CNMM160612-HU7 WPP30G is a rhombic 80° indexable insert designed for turning steel, featuring Tiger·tec Gold coated carbide and an HU7 chipbreaker for stable machining performance. Tiger·tec Gold coating for long tool life Optimised HU7 chipbreaker for stable chips Rhombic 80° geometry for versatile turning Corner radius 1.2 mm for consistent edge strength Consistent productivity through advanced grade and coating The Tiger·tec Gold grade WPP30G combines a coated carbide substrate with an optimised microstructure to deliver high wear resistance and repeatable performance when machining steels (material group P). This engineering reduces flank and crater wear under typical turning temperatures, which translates into longer indexable insert life and fewer tool changes. The result is a measurable improvement in machining uptime and predictable tool-cost planning for production environments where cycle time and tool stability matter. Reliable chip control and surface quality from geometry The HU7 chipbreaker together with the rhombic 80° form and a 0° (negative) relief produce controlled chip formation across a wide range of feeds and cutting speeds. The 1.2 mm corner radius increases edge strength and supports consistent surface finish on turned components, while the negative rake aids in heavy roughing applications. These geometric properties make the insert suitable for both medium- and heavy-duty turning tasks, improving process security and reducing the likelihood of built-up edge or unpredictable chip behaviour. Seamless integration and cost-effective operation Designated as CNMM160612-HU7, the insert fits common ISO toolholder systems for rhombic inserts, enabling quick index changes and straightforward stock management. The combination of coating, grade and geometry allows fewer tool changes and predictable wear progression, supporting lower tooling costs per part. For operations seeking to streamline tool inventories, this insert offers a balance of versatility and economy, particularly when machining a range of unalloyed and alloyed steels typical in production workshops. Application scope and process guidance Certified for material group P (steel), the insert is intended for conventional steel turning applications where robust cutting edges and controlled chipbreaking are required. In practice, the WPP30G grade performs well across variable cutting speeds; appropriate feeds and depths of cut should be selected according to the workpiece material and machine rigidity to maximise life and surface quality. For users requiring specific cutting data for unique steel grades, technical consultation is available to align cutting parameters with process targets and to ensure safe, efficient machining. Contact Metav Werkzeuge for application guidance and to request Walter Tools CNMM160612-HU7 WPP30G inserts for optimised steel turning; our consultants can advise on holder compatibility and cutting parameters Technical data Article number: CNMM160612-HU7-WPP30G-WALTER SKU: CNMM160612-HU7-WPP30G-WALTER Designation: CNMM160612-HU7 WPP30G Product type: Turning indexable insert Brand: Walter Tools Core specifications Series: Tiger-tec Gold Grade: WPP30G Shape: Rhombus 80° Size: 16 Thickness: 06 Corner radius: 1.2 mm Relief / rake: 0° (negative) Chipbreaker: HU7 Applications and features Material group: P (steel) Suitable for: steel machining Coating/material: Coated carbide (Tiger·tec Gold) Tolerance class: M Execution: M FAQ What materials is this insert designed for? The CNMM160612-HU7 WPP30G insert is intended for material group P, meaning it is optimised for machining various steels. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on the WPP30G grade improves wear resistance and thermal stability, extending service life during continuous turning operations. Can this insert be used for roughing and finishing? The rhombic 80° geometry and HU7 chipbreaker make this insert suitable for a range of turning tasks; adjusting feed and depth of cut permits both robust roughing and consistent finishing on steel. Is the insert compatible with standard toolholders? The CNMM160612-HU7 designation corresponds to common ISO toolholder systems for rhombic inserts, enabling direct compatibility with many indexable turning holders. What is the advantage of the 1.2 mm corner radius? A 1.2 mm corner radius increases edge strength and supports improved surface finish stability, particularly under moderate to heavy cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade designations are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is original, factory-new goods from the manufacturer.
CNMM160616-HU3 WPP05G HU3 Wendeplatten - Walter Tools
The combination of a Tiger‑tec Gold coated grade and the HU3 chipbreaker delivers stable chip formation and extended tool life for economical turning of Stahl; the rhombic 80° geometry with a 1.6 mm corner radius ensures reliable surface finish and repeatable results. Order the insert directly via Metav Werkzeuge or consult our application specialists for tailored machining parameters. CNMM160616-HU3 WPP05G — Turning insert CNMM160616‑HU3 for Stahl, Tiger‑tec Gold by Walter Tools A CNMM160616‑HU3 WPP05G rhombic 80° indexable insert engineered for general turning of Stahl, featuring a HU3 chipbreaker and a 0° negative rake for predictable chip control Tiger‑tec Gold coated grade WPP05G Suitable for Stahl machining 1.6 mm corner radius, 80° rhombic HU3 chipbreaker for controlled chips Consistent chip formation for uninterrupted production The combination of the HU3 chipbreaker and the rhombic 80° geometry produces regular, manageable chips during longitudinal and facing operations. With a 1.6 mm corner radius and 0° negative rake, this insert reduces vibration and contributes to a stable cutting process; the result is less unplanned stoppage and more predictable cycle times. The controlled chip flow also minimises the risk of rework, which leads to measurable gains in process efficiency and throughput. Durable coating for lower tooling costs per part Designed in the WPP05G grade within the Tiger‑tec Gold family, the insert features a coated carbide substrate optimised for the heat and chip characteristics of Stahl. The coating improves wear resistance and extends edge life, meaning fewer indexings and reduced tooling consumption over the life of a job. This higher durability translates directly into a lower cost per component when compared with uncoated or less advanced grades, especially in medium-duty turning where material build-up and temperature spikes are common. Geometry and tolerance for reliable surface quality With a compact plate size and a tolerance class M, the insert delivers consistent geometry across batches, supporting reproducible part quality and easy tool‑holder set‑up. The combination of rhombic form and the specified corner radius helps achieve good surface finishes even in variable feed conditions, while the insert’s dimensions and thickness make it compatible with standard turning tool holders. These attributes together support stable machining strategies and faster ramp‑up times on new programmes. Application support for optimised results When selecting cutting data, the insert’s behaviour in Stahl should guide feeds and speeds to balance tool life and productivity. Trial cuts under representative conditions will quickly show the best compromise for a given machine and alloy. Metav Werkzeuge can supply recommended starting parameters and help interpret in‑process observations to refine settings, ensuring the insert performs to its potential across batch and continuous production environments. Discuss application needs with Metav Werkzeuge for tailored advice on integrating the Tiger‑tec Gold WPP05G insert into Stahl machining — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CNMM160616-HU3-WPP05G-WALTER Label: Drehwendeschneidplatte CNMM160616-HU3 WPP05G Walter Tools Manufacturer: Walter Tools Facts Corner radius: 1.6 mm Plate thickness: 06 Plate size: 16 Free angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP05G Chipbreaker: HU3 Plate form: Rhombus 80° Coated carbide Application: Stahl FAQ What materials is this insert suitable for? The CNMM160616‑HU3 WPP05G insert is designed primarily for machining Stahl; the WPP05G grade and Tiger‑tec Gold coating are optimised for the thermal and chip conditions typical of steel turning. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker promotes controlled chip formation and evacuation, which reduces the likelihood of entanglement and supports consistent surface finish and stable cycle times when using the CNMM160616‑HU3 geometry. Can this insert be used for finishing operations? With a 1.6 mm corner radius and the rhombic 80° form, the insert offers a balance between edge strength and surface quality, making it suitable for medium finishing passes in Stahl where a robust edge is required. What are the main advantages of the Tiger‑tec Gold coating? Tiger‑tec Gold in the WPP05G grade provides enhanced wear resistance and thermal stability, extending tool life and improving productivity in turning applications of Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM160616-HU3 WPP10G WPP10G Wendeplatten - Walter Tools
Reduced machining costs, extended tool life and predictable chip control make this insert a practical choice for demanding steel applications. Take advantage of the Tiger·tec Gold coating and stable edge geometry for consistent productivity — order the CNMM160616-HU3 WPP10G via Metav Werkzeuge or contact our advisors for application support. CNMM160616-HU3 WPP10G turning insert, Tiger·tec Gold, HU3 chipbreaker — Walter Tools The CNMM160616-HU3 WPP10G is a rhombic 80° turning insert with a 1.6 mm corner radius and a 0° negative relief, optimised for steel machining under ISO P conditions Tiger·tec Gold coated carbide Rhombic 80° form, 1.6 mm corner radius Optimised for steel, stable chip control Consistent performance for steel machining The combination of Tiger·tec Gold coating and the WPP10G grade delivers wear resistance and heat management specifically tuned for steel. The coated carbide substrate reduces flank wear and prolongs service life in continuous and intermittent cuts; this lowers tool-change frequency and supports predictable production cycles. Designed for the heat and chip formation typical of ISO P materials, the insert enhances process stability and reduces scrap rates, providing a measurable productivity advantage on turning operations. Geometry that supports surface finish and tool life A rhombic 80° form with a 1.6 mm corner radius and a 0° (negative) relief angle creates a robust cutting edge that resists chipping while promoting repeatable dimensional control. The HU3 chipbreaker is balanced to fragment swarf effectively in a wide range of turning feeds, improving evacuation and reducing re-cutting. Together, these geometry features contribute to a reliable surface finish and lower cutting forces, which in turn reduce machine load and energy consumption during serial production. Designed for efficient production and low operating costs The coated carbide grade and the stable edge of this insert support longer tool life and fewer interruptions, directly affecting the cost per component. The WPP10G grade is positioned for high wear resistance in steel; the result is extended cutting intervals and predictable regrinding or replacement schedules. For manufacturers focused on cycle-time reduction and consistent output, the insert offers a convincing cost-benefit profile by lowering downtime and maintaining dimensional accuracy across batches. Practical application guidance and handling This turning insert is suitable for unalloyed and alloyed steels classified under ISO P and is supplied in tolerance class M for standard interchangeability. For best results, select cutting parameters that match the workpiece grade and the intended surface quality; moderate feed rates with stable depth of cut typically exploit the HU3 chipbreaker most effectively. The insert designation CNMM160616-HU3 WPP10G identifies the geometry and grade clearly for tool inventory and ordering, simplifying toolposting and job setup in CNC turning applications. Contact Metav Werkzeuge for tailored cutting data and availability of Walter Tools inserts — our specialists will advise on optimal cutting parameters and supply options Technical data Article number: CNMM160616-HU3-WPP10G-WALTER Item designation: CNMM160616-HU3 WPP10G Product type: Turning indexable insert Brand: Walter Tools Series: Tiger·tec Gold Core specifications Insert size: 16 Thickness code: 06 Corner radius: 1.6 mm Relief angle: 0° Geometry: Rhombic 80° Chipbreaker: HU3 Tolerance class: M Material & applications Coating: Tiger·tec Gold Grade: WPP10G Material group: P (steel) Execution: M Suitable for: unalloyed and alloyed steels (ISO P) FAQ What materials is this insert suited for? The CNMM160616-HU3 WPP10G is formulated for ISO P materials, making it suitable for unalloyed and alloyed steels. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker is designed to produce controlled chip formation in a broad range of turning feeds, enhancing evacuation and surface consistency. What does the 0° negative relief mean in practice? A 0° negative relief produces a stronger cutting edge, which increases resistance to shock and improves edge stability during interrupted cuts. Is the corner radius important for finish and strength? Yes — the 1.6 mm corner radius balances edge strength and the ability to achieve good surface finish, reducing the risk of chipping under heavier cuts. How should the insert be specified when ordering? Order using the full designation CNMM160616-HU3 WPP10G to ensure correct geometry, chipbreaker and grade are supplied. Die Walter AG (marketed as Walter Tools) gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CNMM160616-HU3 WPP20G Wendeplatten - Walter Tools
High-performance steel turning with consistent tool life and controlled chip formation makes this insert a reliable choice for demanding production. The combination of the Tiger·tec Gold coating and the HU3 chipbreaker delivers process stability and economical machining. Order the turning insert directly via Metav Werkzeuge or ask the consultants for tailored recommendations. CNMM160616-HU3 WPP20G turning insert — Rhombic 80°, for steel — Walter Tools CNMM160616-HU3 WPP20G is a coated carbide turning insert designed for robust steel machining and universal application in ISO P materials Tiger·tec Gold coated carbide Optimised HU3 chipbreaker Rhombic 80° form for versatility 1.6 mm corner radius for robust edge Consistent performance for steel machining The combination of the WPP20G grade and Tiger·tec Gold technology provides a stable cutting edge and predictable wear behaviour when machining steels (ISO P). The coated carbide substrate is engineered to tolerate the heat and chip formation typical of steel turning, which reduces the need for frequent index changes and supports a steady production rhythm. This results in lower tool cost per part and improved process repeatability for batch or continuous turning operations. Reliable chip control and longer edge life Equipped with the HU3 chipbreaker and a Rhombic 80° geometry, the insert produces short, controllable chips in a wide range of steel alloys. The 1.6 mm corner radius increases edge robustness and resistance to microchipping, while the 0° (negative) relief angle provides dimensional stability during interrupted cuts. For operators less familiar with chipbreaker design: the HU3 profile shapes the chip to avoid long stringers and to facilitate evacuation, reducing rework and machine downtime. Easy integration into production tooling systems The insert comes in the standard CNMM format and the M tolerance/execution class, simplifying tool inventory and ensuring interchangeability in conventional turning tool holders. The nominal size designation supports straightforward tool list entries and consistent set-up values on the machine. With its balanced blend of toughness and wear resistance, this insert suits general-purpose turning in steel and can reduce the number of different grades required on the shop floor, supporting leaner tooling strategies and faster job changeovers. Contact Metav Werkzeuge for availability and cutting-data advice for Tiger·tec Gold inserts; specify CNMM160616-HU3 WPP20G from Walter Tools when enquiring — info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: CNMM160616-HU3-WPP20G-WALTER Article: CNMM160616-HU3 WPP20G Type: Turning insert Manufacturer: Walter Tools Core specifications Shape: Rhombic 80° Insert size: 16 Thickness: 06 Corner radius: 1.6 mm Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: HU3 Material group suitability: Steel (ISO P) Execution: M Designation without grade: CNMM160616-HU3 FAQ What steels is this insert suited for? The CNMM160616-HU3 WPP20G insert from Walter Tools is formulated for ISO P materials, covering unalloyed and alloyed steels and offering reliable performance across a broad steel spectrum. How does the HU3 chipbreaker improve machining? The HU3 chipbreaker on this indexable insert forces short, segmented chips, improving evacuation and reducing the risk of entanglement; this enhances process stability when turning steel with the Tiger·tec Gold-coated grade. Can this insert handle interrupted cuts or heavy cuts? With a 1.6 mm corner radius and a negative 0° relief angle, the insert provides robust edge strength and dimensional stability, making it suitable for many interrupted and moderately heavy turning operations. Which tool holders are compatible with this geometry? The CNMM form fits standard CNMM tool holders specified for rhombic 80° inserts; using the matching holder ensures correct seating and consistent cutting geometry for repeatable results. What advantage does the Tiger·tec Gold coating offer? The Tiger·tec Gold coating on the WPP20G grade increases wear resistance and thermal stability, extending edge life and maintaining surface finish in steel turning applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, factory-new goods from Walter Tools.
CNMM160616-HU3 WPP30G Wendeplatten - Walter Tools
Take advantage of the coated-carbide technology and a dedicated HU3 chipbreaker to secure longer tool life and reliable chip control in Stahl turning; order directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. CNMM160616-HU3 WPP30G – Turning indexable insert (Rhombus 80°, Tiger·tec Gold) by Walter Tools The CNMM160616-HU3 WPP30G is a rhombic 80° indexable insert conceived for precision turning in Stahl, combining a robust HU3 chipbreaker with the Tiger·tec Gold coating technology for consistent performance. Tiger·tec Gold coating for extended life HU3 chipbreaker for predictable chip control Rhombus 80° geometry for versatile turning 1.6 mm corner radius for stable finishing High-performance cutting for demanding Stahl applications This insert is engineered around the Tiger·tec Gold coating and a coated carbide substrate to address the thermal and mechanical demands of Stahl machining. The combination reduces flank wear and stabilises the cutting edge, which directly extends tool life and increases process reliability. The HU3 chipbreaker promotes controlled chip formation during continuous turning, lowering the risk of built-up edge and interruptions. In practical terms, fewer tool changes and more consistent cycles lead to improved productivity and predictable component quality. Predictable geometry for repeatable dimensions and surface finish The Rhombus 80° form and a 1.6 mm corner radius provide a balance between strength and accessibility in various turning contours. The 0° negative rake increases edge strength for robust cutting conditions while maintaining controllable cutting forces, which helps preserve dimensional accuracy on long runs. Thanks to this geometry, repeatability is improved and vibration-related surface defects are reduced. For shops seeking consistent part tolerances, the insert’s stable form factor supports reproducible results across batches. Practical integration and economical operation in the workshop Designed as a standard ISO-style insert, the component simplifies tool-change routines and inventory management. The designation CNMM160616-HU3 indicates compatibility with common toolholders and clamping systems, enabling quick replacement and minimal downtime. Using a WPP30G grade from the Tiger·tec Gold family facilitates broad Stahl coverage with a focus on wear resistance and universal usability. Overall, the insert helps reduce total machining costs by extending service intervals and delivering steady cutting performance under a range of conditions. For tailored tooling advice or to specify CNMM160616-HU3 WPP30G for a particular Stahl turning task, contact Metav Werkzeuge for prompt technical guidance: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: CNMM160616-HU3-WPP30G-WALTER Designation: CNMM160616-HU3 WPP30G Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Geometry: Rhombus 80° Corner radius: 1.6 mm Thickness: 06 Size: 16 Rake angle: 0° (negativ) Tolerance class: M Grade: WPP30G Special features Series: Tiger·tec Gold Chipbreaker: HU3 Material group suitability: P → Stahl Substrate: coated carbide Execution: M FAQ What materials is this insert suitable for? The CNMM160616-HU3 WPP30G is formulated for the P material group and is therefore suitable for machining Stahl, offering optimized performance for the heat and chip formation typical of these alloys. What benefits does the Tiger·tec Gold technology provide? Tiger·tec Gold coating on the WPP30G grade enhances wear resistance and edge stability, which helps extend service life and maintain consistent surface quality during prolonged Stahl turning. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker on this indexable insert provides controlled chip formation during turning operations, improving swarf management and reducing risks associated with long, stringy chips. What does the designation CNMM160616-HU3 indicate? The ISO-style code denotes the insert family and geometry (rhombic form and size), the chipbreaker type HU3, and the WPP30G grade—information useful for matching the insert to compatible toolholders. Is this insert suitable for finishing and semi-finishing tasks? With a 1.6 mm corner radius and a robust geometry, the insert supports stable finishing and can be used for semi-finishing where edge strength and predictable surface results are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM160616-HU5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of a robust combination of Tiger·tec Gold coating and the WMP20G grade for secure chip formation when machining stainless steel; the rhombic 80° geometry with r = 1.6 mm and a 0° negative rake delivers stable cutting performance and predictable tool life. Order through Metav Werkzeuge or consult their specialists for application-specific recommendations. CNMM160616-HU5 / CNMM160616-HU5 WMP20G / WMP20G Turning indexable insert — Rhombic 80°, r = 1.6 mm, Tiger·tec Gold, Walter Tools The CNMM160616-HU5 WMP20G is a rhombic 80° turning insert tailored for machining stainless steel in medium to robust conditions, combining a coated-carbide grade with a proven chipbreaker for controlled performance. Tiger·tec Gold coating for longer tool life Optimised HU5 chip control Rhombic 80° form for versatile turning Specifically for stainless steel applications Consistent performance on stainless steel The combination of the WMP20G grade and Tiger·tec Gold coating supports reliable metal removal when working with stainless steel, materials that tend to be tough and prone to built-up edge. The coated-carbide substrate offers improved edge stability, which reduces unplanned tool changes and increases process uptime. With a focus on measurable production benefits, this solution helps to maintain consistent surface quality while lowering the risk of premature flank wear. Geometry and edge design that improve productivity The rhombic 80° plate form and a corner radius of r = 1.6 mm provide a balance between strength and form accuracy. The insert’s 0° negative rake increases edge robustness on interrupted cuts and heavy feeds, while the HU5 chipbreaker keeps chips compact and manageable. For shop-floor planning, the stronger cutting edge means fewer tool rotations and predictable cycle times, translating directly into higher throughput and less operator intervention. Practical selection and integration guidance Designed to fit standard CNMM toolholders, this insert simplifies tooling logistics and replacement. The coated carbide grade is intended for medium to robust conditions on stainless steel; match feed and speed to the material condition and machine rigidity for best results. For businesses aiming to standardise on a single grade for stainless applications, the Tiger·tec Gold family offers broad applicability and repeatable performance. If further optimisation or verification is required, Metav Werkzeuge can provide targeted advice on insert geometry and machining parameters. Contact Metav Werkzeuge to discuss application-specific recommendations for Walter Tools Tiger·tec Gold WMP20G inserts and to arrange technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CNMM160616-HU5-WMP20G-WALTER Designation: CNMM160616-HU5 WMP20G Product type: Turning indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP20G Chipbreaker: HU5 Core technical data Plate size: 16 mm Thickness: 6 mm Corner radius: 1.6 mm Relief / rake angle: 0° (negative) Plate form: Rhombus 80° Tolerance class: M Special features Coated carbide grade WMP20G Tiger·tec Gold coating technology Suitable for stainless steel HU5 chipbreaker for controlled chips Robust edge for interrupted cuts and medium to heavy conditions FAQ Which materials is this insert designed for? This insert is specified for stainless steel (stainless steels) and is optimised for the typical demands of these materials using the Walter Tools WMP20G grade. What does the HU5 chipbreaker deliver in practice? The HU5 chipbreaker produces short, controllable chips and supports stable cutting under medium to robust conditions, improving process safety and surface consistency. What are the key geometry values to consider for setup? Key values are the rhombic 80° form, r = 1.6 mm corner radius and a 0° negative rake; these influence feed selection, depth of cut and holder rigidity requirements. Can this insert be used in standard CNMM holders? Yes; the CNMM160616-HU5 designation corresponds to standard CNMM toolholders, allowing straightforward integration into existing turning toolsets. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold promotes a stable cutting edge and extended tool life on stainless steel, reducing wear and enabling consistent results over longer tool lifetimes. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM160616-HU5 WPP10G WPP10G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold wear resistance, a HU5 chipbreaker for reliable chip control and a robust 1.6 mm corner radius ensures high productivity and predictable tool life in steel turning; order inserts or request application advice from Metav Werkzeuge for immediate integration into production. CNMM160616-HU5 CNMM160616-HU5 WPP10G turning indexable insert for steel — WPP10G (Walter Tools) The CNMM160616-HU5 WPP10G is a rhombic 80° turning indexable insert engineered for productive steel machining in the Tiger·tec Gold coated‑carbide grade. Tiger·tec Gold coated carbide grade WPP10G Rhombic 80° insert with 1.6 mm corner radius Negative 0° rake for stable cutting Suited for steel machining per ISO P Increase throughput with a wear‑resistant coated grade The Tiger·tec Gold coating and the WPP10G carbide composition deliver a balance of wear resistance and toughness that reduces unscheduled tool changes. As a coated carbide insert designed for ISO P applications, it handles the typical heat and chip formation encountered in steel turning. The result is longer tool life, fewer interruptions and improved process economy when compared with uncoated grades. Coating technology here means a layered surface treatment that protects the cutting edge against abrasion and built‑up edge, which translates directly into more stable cycle times and predictable production planning. Secure surface quality and dimensional stability during turning Thanks to the rhombic 80° geometry combined with a 1.6 mm corner radius and a 0° (negative) rake, this insert provides a robust cutting edge for demanding cuts. The HU5 chipbreaker is designed to control chip formation in steel, reducing the risk of long, entangling chips and helping to maintain consistent surface finish. A larger corner radius like 1.6 mm increases edge strength, allowing heavier depths of cut while supporting repeatable part accuracy — an advantage for batch production where dimensional consistency matters. Quick installation and low handling overhead for toolrooms The CNMM form supports rapid indexing and straightforward seating in standard turning toolholders compatible with CNMM geometry. The insert’s nominal 16 size and 06 thickness provide a compact yet stable package that simplifies inventory management. Indexable inserts reduce waste by allowing multiple edges to be used before disposal, which contributes to lower per‑part tooling costs and less machine downtime for the workshop. Clear material suitability for steel (ISO P) helps maintenance planners select appropriate grades without trial‑and‑error. Application guidance and process support For machining across a wide range of steels the WPP10G grade is tuned to offer a compromise between wear resistance and toughness; it is classified for steel applications and performs well under the thermal and mechanical loads typical for these materials. If optimising cutting data or selecting the most efficient holder geometry is required, Metav Werkzeuge can provide application recommendations and data sheets to support process qualification. Practical advice on feed, speed and depth of cut ensures the component quality and tool life advantages of this insert are realised in daily production. Contact Metav Werkzeuge for tailored application advice and to secure Tiger·tec Gold WPP10G inserts for reliable steel turning in your shop floor Technical Data SKU: CNMM160616-HU5-WPP10G-WALTER Article designation: CNMM160616-HU5 ISO designation: CNMM160616-HU5 WPP10G Manufacturer: Walter Tools Facts Insert size: 16 Thickness: 06 Corner radius: 1.6 mm Rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP10G Chipbreaker: HU5 Coating: coated carbide Material suitability: steel (ISO P) Geometry: Rhombic 80° Manufacturer brand: Walter Tools FAQ Is this insert suitable for stainless steel applications? The CNMM160616-HU5 WPP10G insert and its WPP10G grade are specified for steel (ISO P); stainless steel suitability is not indicated for this grade. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on WPP10G increases abrasion resistance and thermal stability of the cutting edge, which improves tool life and process reliability in steel turning. How does the HU5 chipbreaker affect machining? The HU5 chipbreaker is configured to manage chip formation in steel turning, promoting controllable chip shapes that reduce interruptions and help maintain surface finish. Can the CNMM160616-HU5 be used in standard CNMM holders? Yes, the CNMM geometry is compatible with standard turning toolholders designed for CNMM inserts, allowing straightforward indexing and replacement. What does the 1.6 mm corner radius mean for cutting performance? A 1.6 mm corner radius strengthens the insert edge, enabling heavier cuts and improved resistance to edge chipping, which is beneficial for increased material removal rates and roughing operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the trademark owners. The offered item is an original, factory‑new product of the manufacturer.
CNMM160616-HU5 WPP20G Wendeplatten - Walter Tools
Take advantage of a proven combination of Tiger·tec Gold coating and an optimised HU5 chipformer for stable cutting performance and consistent tool life; the insert’s 1.6 mm corner radius and rhombic 80° geometry ensure reliable edge strength in demanding steel turning operations. Order the CNMM160616-HU5 WPP20G directly via Metav Werkzeuge or ask our consultants if needed. CNMM160616-HU5 WPP20G – Turning insert, Tiger·tec Gold coated, for steel | Walter Tools The CNMM160616-HU5 WPP20G is a rhombic 80° turning insert designed for productive steel machining, combining a Tiger·tec Gold coated carbide grade with an HU5 chipformer to balance wear resistance and chip control. Tiger·tec Gold coated carbide Optimised chipformer HU5 Rhombic 80° shape, 1.6 mm corner radius Designed for steel machining Stable edge life for predictable production The Tiger·tec Gold coated grade WPP20G delivers a high level of wear resistance while retaining toughness, which translates into longer service life and fewer insert changes during batch runs. The coated cemented carbide substrate is optimised for the thermal and mechanical demands of steel turning (ISO P), so users can expect stable cutting performance under variable cutting conditions. Thanks to the 0° negative rake, the geometry prioritises secure edge support, making the insert particularly suited to interrupted cuts or heavier depths of cut. Improved chip control that reduces rework Equipped with the HU5 chipformer, this insert promotes controlled chip segmentation and evacuation, reducing the risk of built-up edge and scrap parts. Controlled chip formation helps to maintain surface finish and dimension accuracy, which supports higher first-pass yields and less rework. The rhombic 80° profile and 1.6 mm corner radius provide a robust cutting edge that balances strength with a fine surface result, ideal for roughing and mixed finishing operations in unalloyed and alloyed steels. Simple specification and flexible application The CNMM geometry and standard 16 mm size make this insert compatible with a wide range of toolholders commonly used in turning applications. Its designation and tolerance class indicate a manufactured consistency that supports repeatable setups and predictable process behaviour. As the insert is specified for steel applications (ISO group P), it is a practical choice for workshops seeking a versatile, production-proven solution that reduces downtime and simplifies tool inventory management. Contact Metav Werkzeuge today to discuss how the CNMM160616-HU5 WPP20G can be integrated into current processes or to request application advice from our technical team Technical data Article number: CNMM160616-HU5-WPP20G-WALTER Designation: CNMM160616-HU5 WPP20G Manufacturer: Walter Tools Product type: Turning insert Core dimensions Insert size: 16 Thickness: 06 Corner radius: 1.6 mm Relief angle: 0° (negative) Included angle: 80° Special features Coating / grade: Tiger·tec Gold / WPP20G Chipformer: HU5 Execution / tolerance class: M Base material group: P (steel) Basic shape: Rhombus 80° Base designation: CNMM160616-HU5 FAQ What materials is this insert suitable for? The CNMM160616-HU5 WPP20G is specified for steel machining (ISO group P), making it suitable for unalloyed and alloyed steels. How does the HU5 chipformer affect machining? The HU5 chipformer promotes controlled chip breakage and evacuation, improving surface quality and reducing the likelihood of chip-related interruptions when using the CNMM160616-HU5 WPP20G. Why choose a 0° negative relief angle? A 0° negative relief provides enhanced edge support and durability, which is beneficial for heavier cuts and intermittent turning tasks with this Walter Tools insert. What advantage does the 1.6 mm corner radius offer? The 1.6 mm corner radius increases edge strength and wear resistance, contributing to longer insert life and consistent dimensional results when machining steels. Is the insert compatible with standard CNMM toolholders? Yes, the CNMM form and 16 mm size align with common CNMM-compatible holders, facilitating straightforward integration into existing turning setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for identification and explanation only. There is no affiliation between our company and the mentioned brands. The described article is an original, factory-new product of the manufacturer Walter Tools.
CNMM160616-HU5 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of a high‑temperature-resistant grade and a robust chipbreaker to ensure consistent chip control and reliable cutting edge life in demanding applications; the combination of Tiger·tec Silver coating and a HU5 chipbreaker supports secure removal of material from rostfreier Stahl and heat‑resistant alloys. Order the CNMM160616‑HU5 WSM30S directly via Metav Werkzeuge or ask our consultants if needed. CNMM160616-HU5 WSM30S indexable turning insert — Tiger·tec Silver for rostfreier Stahl The CNMM160616‑HU5 WSM30S is an indexable turning insert engineered for heavy and demanding turning of rostfreier Stahl and heat‑resistant superalloys, offering a negative rake and an optimised chipbreaker for stable machining. Tiger·tec Silver coating for heat resistance HU5 chipbreaker for secure chip control Rhombic 80° shape for versatile turning Corner radius 1.6 mm for edge strength Consistent performance for demanding materials The combination of the WSM30S grade and Tiger·tec Silver coating is designed for applications where temperature and adhesion threaten tool life. The coated cemented carbide formulation improves heat resistance and reduces built‑up edge formation when machining rostfreier Stahl and superalloys. This results in more predictable wear behaviour, fewer interruptions for edge changes, and a higher ratio of productive cutting time — a clear rational advantage where process reliability and component quality are priorities. Geometry and chip control that protect the tool and the workpiece The negative relief angle of 0° (negative) together with the HU5 chipbreaker and the rhombic 80° form create a cutting geometry that promotes controlled chip formation and safe evacuation. The corner radius 1.6 mm increases the strength of the cutting edge under heavy loads and reduces the risk of chipping during interrupted cuts. For production environments handling difficult‑to‑machine alloys, these design choices translate into fewer tool indexing cycles and more stable surface finishes. Productivity through repeatable results and simple process integration With a tolerance class of M and the standardised CNMM form, this insert fits common toolholders and allows straightforward tool setup and repeatability across batches. The grade’s emphasis on thermal stability supports higher cutting parameters where appropriate, enabling better metal removal rates without sacrificing edge life. For engineers aiming to balance cycle time with component integrity, the insert offers a pragmatic path to improved throughput and consistent part quality. Speak to Metav Werkzeuge about Walter Tools Tiger·tec Silver CNMM160616‑HU5 inserts for optimised rostfreier Stahl turning and request application data or stock availability directly from our specialists Technical data Article number: CNMM160616-HU5-WSM30S-WALTER SKU: CNMM160616-HU5-WSM30S-WALTER Series: Tiger·tec Silver Grade: WSM30S Core dimensions Insert size: 16 Thickness designation: 06 Corner radius: 1.6 mm Relief angle: 0° (negative) Design & features Insert form: Rhombus 80° Chipbreaker type: HU5 Tolerance class: M Material groups: S / M applications (rostfreier Stahl, heat‑resistant alloys) FAQ What materials is this insert suitable for? The CNMM160616‑HU5 WSM30S indexable turning insert by Walter Tools (SKU CNMM160616‑HU5‑WSM30S‑WALTER) is formulated for rostfreier Stahl and heat‑resistant superalloys, providing thermal stability and controlled chip formation. How does the HU5 chipbreaker improve machining? The HU5 chipbreaker on this Walter Tools insert promotes short, segmented chips and safer evacuation, reducing the chance of entanglement and improving surface integrity during turning of demanding materials. What is the benefit of the 1.6 mm corner radius? A corner radius 1.6 mm increases edge robustness and distributes cutting forces more evenly, which helps to avoid premature chipping when machining interrupted cuts or hard‑to‑cut alloys. Will this insert fit standard toolholders? The CNMM geometry conforms to common holder standards for rhombic 80° inserts, enabling simple integration into existing turning setups and straightforward repeatable indexing. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned solely for explanation and to indicate compatibility; there is no affiliation between our company and the named brands. The offered article is original, factory‑new equipment from the manufacturer.
CNMM160616-HU7 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the robust Rhombic 80° geometry with a 1.6 mm corner radius for consistent steel turning. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific recommendations. CNMM160616-HU7 WPP10G — Indexable turning insert (Rhombic 80°, WPP10G) by Walter Tools The CNMM160616-HU7 WPP10G is a rhombic 80° indexable insert featuring the Tiger·tec Gold coating, designed for efficient and reliable machining of steel in turning operations. Tiger·tec Gold coating for extended tool life Rhombic 80° geometry for versatile turning 1.6 mm corner radius for robust edge strength 0° negative rake for secure cutting Efficient steel turning with Tiger·tec Gold that reduces downtime The Tiger·tec Gold coating delivers a balanced mix of wear resistance and toughness, optimised for steel machining under a variety of cutting conditions. As a result, the insert supports longer tool life and fewer indexings compared with conventional grades. The WPP10G grade is formulated for standard to demanding turning tasks and provides predictable performance across a broad range of steel alloys, which helps maintain consistent cycle times and reduces unplanned production stops. This technical balance translates into measurable efficiency gains on the shop floor. Edge stability and durability for uninterrupted production The combination of the 1.6 mm corner radius and the coated carbide substrate increases edge strength and resistance to chipping during medium to heavy cuts. The insert’s robust edge geometry reduces flank wear and contributes to repeatable surface finishes over extended runs. By favouring a stable cutting edge, the insert helps preserve component tolerances and reduces the need for frequent tool changes, supporting higher overall equipment effectiveness in serial production environments. Geometry and chip control that enhance process reliability The Rhombic 80° shape and the HU7 chipbreaker are matched for controlled chip formation and evacuation when machining steels. The neutral 0° negative rake improves insert support and minimises the risk of brittle edge failure in interrupted cuts or hard spots. These geometric choices combine to produce consistent chip flow and reduced cutting forces in many turning operations, simplifying downstream chip management and improving operator confidence when processing long or challenging workpieces. Application guidance and toolholder compatibility for straightforward integration Designed for standard CNMM-style toolholders, the insert integrates easily into existing turning tool assemblies. It is primarily intended for steel applications (ISO P group) and performs across a wide hardness and toughness spectrum typical of general engineering steels. Selection of cutting parameters should consider workpiece alloy, depth of cut and feed to exploit the coated grade’s advantages; conservative initial settings are recommended for process qualification. The insert’s coded designation facilitates quick identification and stock management in production warehouses. For tailored cutting data and availability of the Walter Tools CNMM160616-HU7 WPP10G insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct consultation and fast delivery options Technical data SKU: CNMM160616-HU7-WPP10G-WALTER Designation: CNMM160616-HU7 WPP10G Product type: Indexable turning insert Series: Tiger·tec Gold Grade: WPP10G Manufacturer: Walter Tools Facts Insert size: 16 Corner radius: 1.6 mm Geometry: Rhombic 80° Rake angle: 0° (negative) Chipbreaker: HU7 Tolerance class: M Thickness code: 06 Special features Coating: Tiger·tec Gold Substrate: coated carbide (grade WPP10G) Application group: Steel (ISO P) Robust edge for interrupted cuts Versatile for general turning operations FAQ What steels is this insert recommended for? The CNMM160616-HU7 WPP10G insert is intended for machining steels (ISO P group) and performs well across unalloyed and alloyed steel grades due to the Tiger·tec Gold coating. How does the HU7 chipbreaker affect chip formation? The HU7 chipbreaker on this insert promotes controlled chip segmentation and efficient evacuation when turning steels, improving surface finish and reducing the risk of recutting. Can the insert be used for interrupted cutting? Yes, the 1.6 mm corner radius combined with the 0° negative rake provides enhanced edge support, making the insert suitable for certain interrupted and heavy cuts. Which toolholders are compatible with CNMM160616-HU7 inserts? Standard CNMM-style clamping toolholders designed for rhombic 80° inserts are compatible; ensure correct seat and clamp torque for secure mounting. How is the CNMM160616-HU7 WPP10G different from uncoated grades? The coated WPP10G offers improved wear resistance and edge stability compared with uncoated carbides, resulting in longer tool life and more consistent machining outcomes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not indicate any affiliation with our company. The offered item is original and brand-new from the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com