CNMM160616-HU7 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coated carbide and an HU7 chipbreaker for reliable steel turning and consistent chip control; order the CNMM160616-HU7 WPP20G insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. CNMM160616-HU7 WPP20G — turning insert for steel by Walter Tools CNMM160616-HU7 WPP20G is an indexable turning insert designed for productive machining of steel with a Tiger‑tec Gold coated carbide grade. Tiger‑tec Gold coating for extended tool life Optimised HU7 chipbreaker for stable chips Rhombic 80° geometry for versatile turning 0° negative rake for secure cutting edge High-efficiency steel turning with Tiger‑tec Gold The CNMM160616-HU7 WPP20G insert pairs a coated carbide grade with a geometry tailored for steel machining, delivering consistent cutting performance across a broad range of steels. The WPP20G grade, part of the Tiger‑tec Gold family, is formulated to cope with the thermal and mechanical loads typical when turning steel, which improves productivity by reducing tool changes and stabilising cutting parameters. The rhombic 80° shape and M tolerance classification contribute to predictable seating and repeatable results in clamping systems. Controlled chips and longer tool life through optimised geometry Chip control is central to a safe and efficient turning process; the integrated HU7 chipbreaker is engineered to produce short, manageable chips when machining steel, reducing the need for manual intervention and downtime. The 0° (negative) relief angle stabilises the cutting edge under interrupted cuts and heavy engagement, while the 1.6 mm corner radius gives a balance between edge strength and surface finish. These design choices result in improved process reliability and a measurable reduction in scrap rates for routine turning operations. Practical integration and machining recommendations This insert suits a wide variety of general turning tasks where steel is the predominant material group (designation P). When implementing the insert in production, begin with conservative speeds and feeds to verify chip behaviour and then increase progressively, monitoring surface quality and tool wear. The coated carbide structure of the grade provides a robust barrier against abrasive wear and is particularly advantageous in mixed batch production where material variability can otherwise shorten tool life. For tailored cutting data and fixture advice, technical consultation is recommended to match machine capability and workpiece characteristics. Contact Metav Werkzeuge for technical advice on the CNMM160616-HU7 WPP20G turning insert: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: CNMM160616-HU7-WPP20G-WALTER Article designation: CNMM160616-HU7 WPP20G Label: Drehwendeschneidplatte CNMM160616-HU7 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger‑tec Gold Core dimensions and tolerances Plate size: 16 Plate thickness: 06 Corner radius: 1.6 mm Relief angle: 0° (negative) Shape: Rhombus 80° Tolerance class: M Materials and special features Grade: WPP20G (coated carbide) Chipbreaker: HU7 Substrate application: P (steel) Designation without grade: CNMM160616-HU7 Execution: M Series description: Tiger‑tec Gold — coated carbide designed for steel FAQ What materials is this insert designed for? The CNMM160616-HU7 WPP20G insert is designed primarily for steel (P) applications and the WPP20G grade is optimised for the thermal and chip-formation behaviour typical of steels. How does the HU7 chipbreaker affect machining? The HU7 chipbreaker on this Walter Tools insert produces short, controllable chips when turning steel, improving safety and reducing manual chip handling during production. What advantages does the Tiger‑tec Gold grade offer? Tiger‑tec Gold coating provides a wear-resistant surface and enhanced thermal stability, which together deliver longer tool life and more consistent performance in steel turning operations. Is the geometry suitable for interrupted cuts? Yes; the 0° negative relief and robust corner radius provide additional edge security for interrupted or heavy cuts, improving process reliability with this turning insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named manufacturers. The offered article is an original, factory-new product of the specified manufacturer.
CNMM160624-HU3 WPP10G HU3 Wendeplatten - Walter Tools
Take advantage of excellent cutting performance, consistent chip control and long tool life thanks to the Tiger·tec Gold coating and a HU3 chipbreaker paired with a 2.4 mm corner radius; order directly via Metav Werkzeuge or consult our specialists for application advice. CNMM160624-HU3 WPP10G indexable turning insert – Tiger·tec Gold coating, for steel (Walter Tools) A CNMM160624-HU3 WPP10G is an indexable turning insert with a rhombic 80° geometry and a negative 0° rake, engineered for efficient turning of steel components in production environments. Tiger·tec Gold coated carbide Negative 0° rake for stable cutting Optimised HU3 chipbreaker 2.4 mm corner radius for robust edges Consistent performance for steel machining The Tiger·tec Gold-coated indexable insert delivers reproducible results when machining steel (material group P). The coated carbide substrate provides a balanced combination of wear resistance and toughness, so processing parameters remain stable across batch runs. The rhombic 80° geometry and negative 0° rake contribute to a secure cutting angle that reduces vibration, supporting predictable tool behaviour and consistent surface finish on turned parts. Reliable chip control and edge stability Thanks to the HU3 chipbreaker, the insert ensures controlled chip formation even under varying cutting depths. Controlled chips reduce interruption risks at the toolholder and keep cycle times steady. The 2.4 mm corner radius strengthens the cutting edge, improving resistance to chipping and maintaining dimensional accuracy over extended tool life. Together these features promote fewer tool changes and higher throughput. Geometry and design for production efficiency The insert’s rhombic 80° shape and robust thickness provide mechanical stability in demanding turning operations. The combination of geometry and Tiger·tec Gold coating enables higher cutting speeds and improved process security without sacrificing finish quality. Where consistent cycle times and repeatability are essential, this design supports efficient machining strategies and predictable set-up times. Operational economy through extended tool life A coated carbide grade optimised for steel processing reduces flank and crater wear, translating into longer tool life and fewer index changes. Lower tooling consumption and reduced downtime contribute directly to cost-efficiency in medium- to high-volume contexts. The durable edge preparation and chip control characteristics lessen scrap rates and support continuous production schedules. Application guidance and compatibility The insert is suitable for general turning of unalloyed and alloyed steels in conventional and semi-finish operations. Its layout and tolerance class M match industrial toolholder standards for inserts of this family, enabling straightforward integration into existing tool systems. For specific cut data or to confirm suitability for particular steels, consult technical data sheets or request tailored recommendations. Contact Metav Werkzeuge for application advice or to order this Walter Tools insert directly via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CNMM160624-HU3-WPP10G-WALTER SKU: CNMM160624-HU3-WPP10G-WALTER Type designation: CNMM160624-HU3 WPP10G Numbers / Core technical data Inscribed circle / size: 16 mm Corner radius: 2.4 mm Thickness: 6 mm Clearance / rake: 0° (negative) Designs / Special features Coating: Tiger·tec Gold Chipbreaker: HU3 Substrate: coated carbide (WPP10G) Geometry: rhombic 80° Tolerance class: M Execution: M Intended material group: Steel (P) FAQ What materials is the CNMM160624-HU3 WPP10G suitable for? The CNMM160624-HU3 WPP10G, from the Tiger·tec Gold series, is designed primarily for steel machining (ISO group P), including unalloyed and alloyed steels. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker on this Walter Tools insert promotes consistent chip formation and evacuation, which reduces the risk of built-up edge and improves process stability. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold coating enhances wear resistance and toughness on the insert, leading to longer tool life and the ability to run at higher cutting speeds in steel applications. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
CNMM160624-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
Combining the high wear resistance of the Tiger·tec Gold WPP20G grade with a robust 2.4 corner radius and the HU3 chipbreaker results in a dependable solution for productive steel turning; order the CNMM160624-HU3 WPP20G directly via Metav Werkzeuge or request application advice from our consultants. CNMM160624-HU3 WPP20G indexable turning insert – Tiger·tec Gold, HU3 | Walter Tools A CNMM160624-HU3 WPP20G indexable insert designed for productive steel machining, offering a rhombic 80° form and a secure 2.4 corner radius for stable cutting. Tiger·tec Gold coating for high wear resistance Universal steel grade WPP20G 2.4 corner radius for secure cutting edge Rhombic 80° form for versatile turning Consistent metal-cutting performance for steels The combination of the WPP20G grade and the Tiger·tec Gold coating ensures enhanced wear resistance and a broad applicability across steels. As a coated carbide grade optimised for steel turning, the insert supports predictable tool life and consistent results even under variable cutting conditions. The rhombic geometry with an 80° included angle contributes to stable cutting forces and allows for versatile application across longitudinal and facing operations. These technical properties translate into fewer tool changes and a smoother production flow, improving process efficiency in series production or job-shop environments. Robust geometry that stabilises machining The insert’s negative relief (0° negative) and the 2.4 corner radius provide a reinforced cutting edge that resists mechanical shock and edge chipping during interrupted cuts or heavy roughing. The Rhombus 80° shape balances accessibility to different profiles with sufficient edge strength for medium to heavy cuts. The presence of the HU3 chipbreaker supports controlled chip formation on typical steel grades, reducing the risk of built-up edge and improving surface finish. Together these features contribute to reproducible component quality and reduced rework, which is particularly valuable for batch production where repeatability is critical. Better chip control and productivity in everyday use The dedicated chipbreaker geometry and the coated carbide substrate combine to improve chip control and reduce thermal wear at the cutting zone. A well-matched chipbreaker such as HU3 helps to direct and break chips efficiently when machining steels, lowering the likelihood of entanglement and machine downtime. The technical design also supports higher cutting data stability, enabling tighter tolerances and consistent surface integrity throughout the tool life. For workshops aiming to raise throughput without compromising quality, this insert offers a pragmatic balance between tool life and machining performance. Contact Metav Werkzeuge for tailored cutting data, practical application guidance and to secure CNMM160624-HU3 WPP20G inserts from Walter Tools – info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: CNMM160624-HU3-WPP20G-WALTER Designation: CNMM160624-HU3 WPP20G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Insert size: 16 Corner radius: 2.4 Thickness: 06 Relief angle: 0° (negative) Shape: Rhombus 80° Special features Grade: WPP20G (Tiger·tec Gold) Chipbreaker: HU3 Tolerance class: M Material application: Steel Series: Tiger·tec Gold FAQ What material range is the insert suitable for? The CNMM160624-HU3 WPP20G is specified for machining steel and its coated carbide grade is optimised for the typical heat and chip-formation behaviour encountered in steel turning. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP20G grade enhances wear resistance and thermal stability, which helps extend tool life and maintain consistent cutting performance in serial machining. What cutting situations suit the HU3 chipbreaker? The HU3 chipbreaker is designed for reliable chip control in general steel turning tasks, improving breakability and reducing the risk of long, stringy chips during medium chip loads. Is the insert suitable for interrupted cuts and roughing? Yes, the negative 0° relief combined with the 2.4 corner radius and robust geometry provides enhanced edge strength suitable for interrupted cuts and roughing operations in steels. Which tolerance class does this insert meet? The insert is supplied in tolerance class M, providing consistent dimensional accuracy for repeatable machining setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM160624-HU7 WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold grade and the robust Rhombic 80° geometry with a 2.4 mm nose radius to achieve stable chip formation, long tool life and consistent results when machining Stahl; order directly via Metav Werkzeuge or consult our specialists for cutting-data recommendations. CNMM160624-HU7 WPP10G turning insert — Tiger·tec Gold for Stahl, Rhombic 80° with 2.4 mm nose radius | Walter Tools CNMM160624-HU7 WPP10G is a versatile turning insert for medium- to high-performance steel machining, designed for reliable finishing and productive roughing in industrial turning applications Tiger·tec Gold coated carbide grade WPP10G Suitable for ISO P (Stahl) machining Rhombic 80° shape with 2.4 mm nose radius HU7 chipbreaker for controlled chip formation Proven grade for demanding Stahl machining The WPP10G grade, part of the Tiger·tec Gold series, combines a coated carbide substrate with a modern coating stack designed for longer tool life and improved wear resistance. This results in fewer insert changes and more productive machining cycles. For production environments processing unalloyed and alloyed Stahl the coated grade balances hardness and toughness to resist thermal loads while maintaining edge stability, which translates into predictable performance and reduced rework. Geometry that balances strength and surface quality The Rhombic 80° shape and the 2.4 mm nose radius provide a compromise between robustness and the ability to achieve fine surface finishes. The geometry, together with a 0° (negative) free cutting angle, gives a secure cutting edge for interrupted cuts and hard tool engagement, reducing the risk of chipping. In practice, this means improved process reliability when turning stepped shafts, shoulders or facing operations where a stable cutting edge is essential for dimensional consistency. Controlled chip flow for uninterrupted production Equipped with the HU7 chipbreaker, the insert actively shapes chips to promote safe evacuation and fewer stoppages. Efficient chip control reduces manual intervention and toolpost cleaning, helping to keep cycle times low and machine uptime high. The coated surface also aids in chip sliding and reduces adhesion, which supports consistent cutting forces and contributes to the overall economic advantage of longer indexable-insert life. Practical selection and recommended uses This insert is tailored for industrial turning centres and lathe shops requiring a reliable solution for Stahl according to ISO P groups. The combination of the Tiger·tec Gold coating, the HU7 chipbreaker and the robust geometry makes it suitable for a wide range of machining tasks from general turning to finishing operations where repeatable results and low downtime are priorities. For tailored cutting parameters, Metav Werkzeuge can provide application-specific recommendations based on machine setup and workpiece material. Contact Metav Werkzeuge for application advice on Walter Tools Tiger·tec Gold inserts and machining parameters: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data SKU: CNMM160624-HU7-WPP10G-WALTER Article designation: CNMM160624-HU7 WPP10G Product type: turning insert (indexable) Series: Tiger-tec Gold Grade: WPP10G Manufacturer: Walter Tools Facts Plate size: 16 mm Nose radius: 2.4 mm Plate thickness: 6.0 mm Free cutting angle: 0° (negative) Special features Chipbreaker: HU7 Plate shape: Rhombic 80° Coating: Tiger·tec Gold (coated carbide) Tolerance class: M Material suitability: ISO P (Stahl) FAQ What materials is this insert suitable for? The CNMM160624-HU7 WPP10G insert is specified for ISO P materials and is optimised for machining Stahl, offering balanced wear resistance and toughness for unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP10G grade reduces wear and improves thermal stability, which extends tool life and supports higher productivity with fewer insert changes. What type of machining is the Rhombic 80° geometry best for? Rhombic 80° geometry with a 2.4 mm nose radius is well suited to general turning and finishing tasks where a robust cutting edge and good surface quality are required. How does the HU7 chipbreaker improve process reliability? The HU7 chipbreaker helps produce short, controllable chips that evacuate reliably, reducing the risk of entanglement and thereby lowering machine downtime and operator intervention. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new merchandise of the manufacturer.
CNMM160624-HU7 WPP20G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WPP20G grade for consistent performance when machining steel; the HU7 chipformer and Rhombus 80° geometry deliver stable chip control and reliable surface finish. Order directly via Metav Werkzeuge or consult our specialists for process matching and variant selection. CNMM160624-HU7 WPP20G turning insert — Walter Tools, Tiger·tec Gold coating, for steel machining CNMM160624-HU7 WPP20G is a negative‑rake indexable insert designed for turning operations in steel, offering robust wear resistance and stable chip formation. Tiger·tec Gold coating for extended tool life Optimised HU7 chipformer for stable chips Rhombic 80° geometry for versatile turning Suitable for steel machining (ISO P) Increased throughput with consistent tool life The combination of the Tiger·tec Gold coating and the WPP20G grade provides a balance of wear resistance and toughness that is tailored to steel machining. The coated carbide substrate reduces flank wear under typical turning temperatures, which contributes to longer tool life and fewer insert changes. For production environments where uptime and predictable replacement intervals matter, this insert supports higher productivity through reduced process variability and more consistent component quality. Reliable chip control and process stability The HU7 chipbreaker is engineered to form short, manageable chips when cutting steels, minimising interruptions from long swarf and reducing the risk of surface damage. The insert’s Rhombus 80° form and 0° negative rake create a robust cutting edge that withstands interrupted cuts and heavy feed rates. Together these features deliver stable cutting forces and improved dimensional stability, making the insert suitable for medium to heavy finishing and roughing operations on unalloyed and alloyed steels. Enhanced surface finish and edge integrity A corner radius of 2.4 mm and the defined insert geometry yield improved surface quality with lower tendency to generate built‑up edge in most steel applications. The insert’s geometry supports consistent contact conditions at the tool–workpiece interface, which helps achieve repeatable surface roughness and reduces the need for secondary finishing. When process windows are narrow, the geometry and coating combination help maintain a sharp, reliable cutting edge over longer running times. Application range and mounting considerations This indexable insert is specified with an inscribed circle of 16 mm and a thickness designation of 06, compatible with toolholders designed for CNMM‑style rhombic inserts. The WPP20G grade is indicated for ISO P materials, covering a broad range of unalloyed and alloyed steels with good thermal and mechanical stability during turning. For selection of the correct seat and clamping system, match the CNMM16 holder type and verify clamping torque recommendations to maintain repeatable positioning and extend insert life. For dependable steel turning with Walter Tools’ Tiger·tec Gold technology — request application advice or place an inquiry with Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) to confirm suitability and quantities Technical data SKU: CNMM160624-HU7-WPP20G-WALTER Article designation: CNMM160624-HU7 WPP20G Series: Tiger·tec Gold Grade: WPP20G Manufacturer: Walter Tools Product type: Turning indexable insert Numbers / Core technical data Inscribed circle: 16 mm Corner radius: 2.4 mm Free (rake) angle: 0° (negative) Thickness designation: 06 Geometry: Rhombus 80° Tolerance class: M Designs / Special features Coating: Tiger·tec Gold (coated carbide technology) Chipformer: HU7 Material application: Steel (ISO P) Execution: M (tolerance/grade execution) Shape: Rhombic 80° insert FAQ What steels is this insert best suited for? The CNMM160624-HU7 WPP20G insert in the WPP20G grade is optimised for ISO P steels, including both unalloyed and alloyed steels where balanced wear resistance and toughness are required. How does the HU7 chipformer affect machining? The HU7 chipformer produces short, controlled chips when turning steel, improving process reliability and reducing swarf‑related interruptions during continuous production runs. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold coating increases wear resistance and thermal stability on the cutting edge, which helps to extend tool life and maintain consistent component quality under varying cutting conditions. Is the insert suitable for interrupted cuts? Yes — the negative 0° rake and the robust rhombic geometry enhance edge strength, making the insert well suited to interrupted cuts and heavier feed applications in steel. Which toolholder type is required for this insert? A CNMM16 toolholder compatible with rhombic 80° inserts and the corresponding clamping system should be used; verify holder seat and clamping torque to ensure stable positioning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM190612-HU3 WPP10G HU3 Wendeplatten - Walter Tools
Take advantage of the proven Tiger‑tec Gold coating together with the robust HU3 chipbreaker and the rhombic 80° geometry to secure consistent, high‑productivity steel turning. Order directly via Metav Werkzeuge or consult the specialists for process-oriented recommendations. CNMM190612-HU3 WPP10G — Walter Tools turning indexable insert, Tiger‑tec Gold, for steel A CNMM190612-HU3 WPP10G turning insert designed for productive steel machining with a balanced combination of wear resistance and toughness. Tiger‑tec Gold coated grade WPP10G Optimised HU3 chipbreaker for steel Rhombic 80° geometry, 1.2 mm corner radius 0° negative rake for stable cutting Durable coated grade for reliable productivity The insert uses the WPP10G grade within the Tiger‑tec Gold family, a coated carbide technology developed for high reliability in steel applications. The coating enhances wear resistance while the substrate maintains sufficient toughness; together they reduce tool changes and help sustain stable machining over longer batches. For production environments this means fewer interruptions and a clearer cost‑benefit through extended tool life and more consistent component quality. Geometry and chip control that stabilise cutting The rhombic 80° form with a 1.2 mm corner radius and the HU3 chipbreaker combine to deliver good edge strength and controlled chip formation when machining steels. The 0° negative rake increases cutting edge robustness, which is advantageous in interrupted cuts or tougher steel grades. These geometric choices promote predictable chip behaviour and contribute to surface finish stability, making the insert suitable for a wide range of turning operations where process security is a priority. Broad steel suitability and practical application Engineered for the machining of steel according to ISO group P, the grade offers a balanced performance profile: wear‑resistant for longer life, yet sufficiently tough for variable conditions. The designation fits standard CNMM toolholder interfaces, allowing straightforward integration into existing tool systems that accept CNMM190612 inserts. For tailored cutting data or material‑specific recommendations, Metav Werkzeuge can provide application guidance and cutting parameter suggestions to optimise throughput and part quality. Contact Metav Werkzeuge for tailored application advice and availability of Walter Tools CNMM190612-HU3 WPP10G turning inserts via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: CNMM190612-HU3-WPP10G-WALTER Designation: CNMM190612-HU3 WPP10G Brand: Walter Tools Facts Plate size: 19 Corner radius: 1.2 mm Free angle: 0° (negative) Thickness code: 06 Plate shape: Rhombus 80° Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP10G (coated carbide) Chipbreaker: HU3 Execution: M Application group: Steel (ISO P) FAQ What materials is this insert intended for? The CNMM190612‑HU3 WPP10G insert from Walter Tools is specified for machining steel (ISO group P) and is optimised for the thermal and chip‑formation characteristics typical of steel turning. What advantages does the Tiger‑tec Gold technology provide? Tiger‑tec Gold coating on the WPP10G grade increases wear resistance and maintains substrate toughness, resulting in longer tool life and more consistent machining performance under production loads. How does the HU3 chipbreaker affect chip control? The HU3 chipbreaker on this insert promotes predictable chip segmentation and evacuation when turning steel, improving surface finish and reducing the risk of built‑up edge in continuous and semi‑continuous cuts. Is the geometry suitable for interrupted cuts? Yes, the rhombic 80° form combined with a 0° negative rake and a 1.2 mm corner radius provides enhanced cutting edge strength, which supports stability in interrupted or variable cutting conditions. Can this insert be used in existing CNMM toolholders? The CNMM190612‑HU3 designation corresponds to the CNMM insert family and is compatible with toolholders designed for CNMM190612 inserts; for exact holder compatibility and clamping details, consult Metav Werkzeuge. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Walter Tools is part of the Walter AG group. Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for identification purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
CNMM190612-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating wear resistance, HU3 chip control and robust Rhombic 80° geometry for consistent turning results; order the CNMM190612-HU3 WPP20G insert directly via Metav Werkzeuge or consult the specialists for application advice. CNMM190612-HU3 WPP20G turning indexable insert — Tiger·tec Gold coated, for steel, Walter Tools CNMM190612-HU3 WPP20G is an indexable turning insert designed for efficient machining of steel with a Tiger·tec Gold coated carbide grade offering reliable performance in serial production Tiger·tec Gold coating for robust wear resistance Optimised HU3 chipbreaker for reliable chip control Rhombic 80° geometry, 0° negative clearance Suitable for steel machining, universal application High process reliability through optimised coating and grade The coated carbide grade WPP20G from the Tiger·tec Gold series combines a wear-resistant top layer with a substrate tuned for turning operations on steel. This results in stable cutting edge behaviour and extended tool life under typical heat and chip-formation conditions encountered when machining unalloyed and alloyed steels. The specification follows the ISO P grouping, which highlights suitability for a wide range of steel grades; the combination of coating and substrate reduces flank wear and increases uptime in production. One measurable advantage is more predictable tool change intervals, which supports consistent cycle times and lowers unexpected downtime. Controlled chip formation and secure cutting with HU3 chipbreaker The HU3 chipbreaker geometry is engineered for dependable chip control in many turning tasks. By influencing chip shape and evacuation, the chipbreaker improves surface finish and reduces the risk of built-up edge during continuous cuts. The profile is particularly effective in turning operations where consistent chip flow supports uninterrupted automated machining and safer handling at the tool post. In practice, reliable chip management from the insert reduces manual intervention, simplifies machine setup and can contribute to faster overall throughput on batch or serial work. Versatile geometry for access and stability in diverse turning tasks The Rhombic 80° insert form offers a favourable balance between accessibility and strength: the acute geometry enables turning at a range of approach angles while maintaining sufficient support for the cutting edge. The designation corner radius 1.2 contributes to a robust edge suitable for general-purpose turning where a compromise between edge strength and surface finish is required. The negative 0° clearance produces a stable cutting line and predictable tool behaviour under varying cut depths. The insert is supplied in the standard thickness designation 06, matching typical clamping systems for this format and ensuring compatibility with common toolholders used in production environments. Practical benefits for workshop productivity and quality Using an indexable insert with these characteristics simplifies tool planning: the CNMM190612-HU3 WPP20G format supports quick index changes, reduces setup complexity and keeps inventory straightforward thanks to a universal geometry for many turning tasks. The combination of coated grade and chipbreaker leads to reproducible surface quality and repeatable part tolerances, which is particularly valuable where batch consistency and component interchangeability are required. For operations seeking to balance process stability with cost-efficiency, the insert offers a pragmatic choice that aligns with common industrial machining strategies. Contact Metav Werkzeuge for personalised application guidance on the Walter Tools CNMM190612-HU3 WPP20G insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: CNMM190612-HU3-WPP20G-WALTER Article: CNMM190612-HU3 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Facts Corner radius: 1.2 mm Insert size: 19 Clearance angle: 0° (negative) Thickness designation: 06 Special features HU3 chipbreaker Coated carbide grade (Tiger·tec Gold) Application group: P (steel) according to ISO 513 Rhombic 80° insert form Execution / tolerance class: M Designation without grade: CNMM190612-HU3 FAQ What materials is this insert best suited for? The CNMM190612-HU3 WPP20G insert is specifically prepared for machining steel (ISO group P); the WPP20G grade and Tiger·tec Gold coating are optimised for the heat and chip-formation characteristics of unalloyed and alloyed steels. How does the HU3 chipbreaker affect performance? The HU3 chipbreaker on this turning insert provides controlled chip formation and improved evacuation, which leads to steadier surface finish and reduced risk of built-up edge when using the CNMM190612-HU3 WPP20G in continuous turning operations. Can this insert be used for finishing as well as roughing? Yes — the combination of a 1.2 mm corner radius and the graded coating makes the insert suitable for general-purpose turning, offering a compromise between edge strength for roughing and surface quality for light finishing cuts when using recommended cutting parameters. What does the 0° negative clearance mean for toolholder choice? A 0° (negative) clearance requires a compatible toolholder that secures the insert form and supports the cutting forces; when clamped correctly, the CNMM190612-HU3 WPP20G delivers stable cutting action and reproducible results. Is the insert part of a standard series for easy replenishment? The insert belongs to the Tiger·tec Gold series under the WPP20G grade, which is a standardised coated carbide family from Walter Tools designed for wide applicability across steel machining tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
CNMM190612-HU3 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the high wear resistance and stable chip formation of a Tiger·tec Gold-coated insert combined with a compact rhombic geometry for efficient turning of Stahl; order through Metav Werkzeuge or consult our team for application advice. CNMM190612-HU3 WPP30G Turning Insert – Walter Tools, Tiger·tec Gold, for Stahl CNMM190612-HU3 WPP30G is a Tiger·tec Gold-coated turning insert designed for general-purpose turning of Stahl with a robust chipbreaker for reliable chip control Tiger·tec Gold coating for enhanced lifespan Suitable for Stahl machining across ISO group P Rhombus 80° geometry for versatile turning tasks HU3 chipbreaker with 1.2 mm corner radius Consistent tool life through advanced coating and substrate The Tiger·tec Gold technology combines a coated carbide substrate with a multi-layer finish to deliver high wear resistance and thermal stability. This makes the insert particularly effective when machining a wide range of Stahl grades where heat and abrasive wear are common. The coating reduces crater wear and helps maintain a stable cutting edge, which translates into fewer tool changes and more predictable cycle times on production runs. For operations that value repeatable results, this coating-substrate pairing provides a reliable foundation for consistent component quality. Predictable chip control and process security With the HU3 chipbreaker and a rhombus 80° outline, the insert produces short, controllable chips under typical turning conditions for Stahl. The corner radius of 1.2 mm supports edge strength and improves surface finish, while the 0° negative rake orientation enhances robustness for heavier cuts. These features work together to reduce the risk of built-up edge and unexpected interruptions, offering process security during medium to heavy cutting operations and contributing to smoother production flows. Versatile geometry for a broad range of turning tasks The compact insert shape and its medium tolerance class provide flexibility across facing, light profiling and general turning tasks. The geometry offers good accessibility for shoulder work and allows stable tool setting in common holders. Because the grade is optimised for the thermal and chip-formation behaviour typical of Stahl, the insert is a suitable choice for both batch production and workshop environments seeking a balance of economy and performance. Contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Gold inserts for Stahl applications or to request cutting-parameter recommendations – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: CNMM190612-HU3-WPP30G-WALTER Designation: CNMM190612-HU3 WPP30G Series: Tiger-tec Gold Grade: WPP30G Manufacturer: Walter Tools Numbers / Core technical data Insert size: 19 mm Thickness: 06 Corner radius: 1.2 mm Insert shape: Rhombus 80° Rake / clearance: 0° (negative) Special features / Versions Chipbreaker: HU3 Substrate/coating: coated carbide (Tiger·tec Gold) Tolerance class: M Application group: P (Stahl) FAQ What materials is this insert intended for? The CNMM190612-HU3 WPP30G insert is designed primarily for Stahl (ISO group P) machining and is optimised for the heat and chip-formation behaviour typical of those steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on this Walter Tools insert improves wear resistance and thermal stability, resulting in longer tool life and more consistent surface quality during turning operations. Is the geometry suitable for heavy cuts? Yes. The rhombus 80° outline combined with a 0° negative rake and a 1.2 mm corner radius provides robustness suitable for medium to heavier turning cuts. Can this insert be used for finishing operations? The insert offers a balance between edge strength and surface finish; with appropriate parameters it can be used for semi-finishing and some finishing tasks on Stahl, depending on component tolerances. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer, Walter Tools.
CNMM190612-HU5 WMP20G M Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, a WMP20G grade formulated for stainless materials and the HU5 chipbreaker for predictable, stable chip control — a reliable choice for productive turning. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CNMM190612-HU5 WMP20G turning insert — rhombic 80°, 1.2 mm nose radius, for rostfreier Stahl — Walter Tools CNMM190612-HU5 WMP20G is a rhombic 80° turning insert designed for medium to robust machining of rostfreier Stahl, combining a coated carbide grade with a dedicated chipformer for controlled cutting performance Tiger·tec Gold coating for long tool life WMP20G grade for rostfreier Stahl applications HU5 chipbreaker for stable chip control Rhombic 80° form with 1.2 mm nose radius Durable coating and grade for demanding rostfreier Stahl operations The combination of the Tiger·tec Gold coating with the WMP20G grade delivers a coated carbide chemistry optimised for machining rostfreier Stahl under medium to robust conditions. This engineered pairing supports consistent cutting performance by improving wear resistance and preserving the cutting edge at elevated temperatures. As a result, the insert provides extended component runs and fewer tool changes, contributing to stable production cycles and predictable productivity gains. Stable chip control and geometry that improves surface finish The HU5 chipbreaker and the 0° (negative) relief angle work together to control chip formation when turning stubborn, work-hardened stainless materials. The 1.2 mm nose radius and rhombic 80° geometry enable a compromise between strength and detail in the turned profile: the radius smooths the finish while the rhombic form gives access to typical turning toolholder orientations. The insert’s geometry aids in heat distribution and reduces the risk of built-up edge, which leads to improved repeatability and a better surface on each component. Productivity advantages in everyday workshop use Designed as an indexable solution, this insert supports short changeover times and easy seat replacement for uninterrupted production. The coated carbide grade and chipformer combination reduce unplanned wear and enhance process reliability, which is especially valuable in batch production or when running series components. The insert’s attributes support both consistent cycle times and lower overall tooling consumption, favouring efficient shop-floor processes and cost-effective machining strategies. Where this insert adds most value Ideal for turning operations on rostfreier Stahl where tool life and chip control are critical, the insert suits general turning, light profiling and routine finishing passes under moderate to heavy cutting regimes. The CNMM190612-HU5 WMP20G insert is compatible with standard toolholder systems accepting CNMM-style geometry; for precise holder matching and parameter optimisation, consult the technical advisers to align feeds and speeds with the workpiece specification and machine capability. Contact Metav Werkzeuge for application advice and to secure CNMM190612-HU5 WMP20G inserts from Walter Tools; technical consultation and availability details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CNMM190612-HU5-WMP20G-WALTER Designation: CNMM190612-HU5 WMP20G Product type: turning insert Series: Tiger·tec Gold Manufacturer: Walter Tools Core data Plate size: 19 Plate thickness: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Special features Grade: WMP20G (coated carbide) Chipbreaker: HU5 Plate form: Rhombus 80° Tolerance class: M Applicable material group: rostfreier Stahl FAQ What materials is this insert intended to machine? The CNMM190612-HU5 WMP20G insert from Walter Tools is designated for machining rostfreier Stahl and is optimised for the toughness and thermal behaviour typical of that material group. How does the HU5 chipbreaker affect performance? The HU5 chipbreaker promotes predictable chip formation and evacuation during turning, which helps maintain a stable cutting edge and improves surface quality when using the WMP20G grade on rostfreier Stahl. Which geometry details matter when selecting a toolholder? The rhombic 80° form and the 1.2 mm nose radius determine the seating and approach angle; choose a CNMM-compatible toolholder that matches the insert geometry to ensure correct cutting edge engagement. Is the Tiger·tec Gold coating beneficial for longer runs? Yes, the Tiger·tec Gold coating on the WMP20G grade increases wear resistance and thermal stability, extending tool life and supporting longer, uninterrupted production runs. Can this insert be used for finishing passes? The combination of the 1.2 mm nose radius and the coated grade makes the insert suitable for finishing and semi-finishing operations on rostfreier Stahl; fine-tuning of feeds and speeds is recommended for optimum surface finish. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM190612-HU5 WPP10G HU5 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the HU5 chipbreaker and a 1.2 mm corner radius for stable, productive steel turning; these characteristics extend tool life and support consistent surface quality. Order the insert directly via Metav Werkzeuge or request application advice from the consultants. CNMM190612-HU5 WPP10G — turning indexable insert with HU5 chipbreaker, Tiger·tec Gold (Walter Tools) The CNMM190612-HU5 WPP10G is a rhombic 80° turning insert designed for precision steel turning, offering a coated carbide grade optimised for reliable chip control and long tool life. Tiger·tec Gold coating for high wear resistance HU5 chipbreaker for reliable chip control Rhombic 80° design with 1.2 mm corner radius Negative rake 0° for stable roughing cuts Maximise uptime through wear‑resistant coating and grade selection The combination of the Tiger·tec Gold coating and the coated carbide grade WPP10G provides improved wear resistance and consistent cutting-edge performance when machining steels (ISO group P). This engineered coating reduces flank wear and maintains edge integrity over longer production runs, which translates into fewer indexings and more continuous machining time. For process planning, the grade is geared towards applications that demand a balance between hardness and toughness, enabling a reliable compromise between productivity and insert life. Controlled chip formation and stable cutting for predictable results The integrated HU5 chipbreaker is designed to produce short, controllable chips in a broad range of steel turning operations. Combined with the negative rake 0°, this geometry increases cutting stability, especially under higher feed rates or interrupted cuts. The rhombic 80° shape and 1.2 mm corner radius support robust edge strength, reducing the risk of chipping and delivering a consistent surface finish. For operators unfamiliar with chipbreakers: the HU5 form actively directs and segments the chip, lowering entanglement and easing swarf evacuation in standard turning setups. Easy identification and straightforward process integration The ISO designation CNMM190612-HU5 corresponds directly to the insert geometry: CNMM denotes the rhombic insert family, 19 indicates the inscribed circle size, 06 refers to thickness, and 12 indicates the 1.2 mm corner radius, while HU5 identifies the chipbreaker. This standardised coding simplifies tool selection and replacement, enabling quick matching with compatible toolholders and minimising downtime for retooling. The insert’s combination of grade and geometry makes it suitable for general to moderate finishing and roughing of steel components where consistent performance and process repeatability are required. Contact Metav Werkzeuge for tailored application recommendations or to arrange supply of Walter Tools inserts, citing CNMM190612-HU5 WPP10G for quick reference Technical Data Article number: CNMM190612-HU5-WPP10G-WALTER Designation: CNMM190612-HU5 WPP10G Product type: Turning indexable insert / Turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Facts Insert size: 19 mm Thickness: 6 mm Corner radius: 1.2 mm Rake: 0° Shape angle: 80° Special features Chipbreaker: HU5 Coating: Tiger·tec Gold (coated carbide) Geometry: Rhombic 80° Execution / tolerance class: M Application group: Steel (ISO P) ISO designation: CNMM190612-HU5 FAQ What materials is this insert optimised for? The CNMM190612-HU5 WPP10G is optimised for machining steels (ISO group P) and designed to handle the typical heat and chip formation associated with these materials. What does the WPP10G grade indicate? WPP10G is a Walter Tools coated carbide grade within the Tiger·tec Gold family, formulated to balance wear resistance and toughness for productive steel turning. How does the HU5 chipbreaker affect machining? The HU5 chipbreaker promotes short, controllable chips and assists reliable swarf evacuation, improving process stability and reducing the risk of chip entanglement. Is the rhombic 80° shape suitable for roughing and finishing? Yes, the rhombic 80° geometry with a 1.2 mm corner radius offers robust edge strength suited to a range of turning operations from moderate finishing to roughing. How is the ISO code CNMM190612-HU5 decoded? CNMM denotes the insert family and shape, 19 indicates the inscribed circle size, 06 the thickness, 12 the corner radius (1.2 mm), and HU5 specifies the chipbreaker form. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presence: Walter Tools) is one of the leading global manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners and are mentioned for informational purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
CNMM190612-HU5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life from the Tiger·tec Gold coating and stable chip control from the HU5 chipbreaker for consistently productive turning cycles. Order the CNMM190612-HU5 WPP20G via Metav Werkzeuge or contact the team for precise cutting data and availability. CNMM190612-HU5 WPP20G indexable turning insert — Tiger·tec Gold, for steel machining, Walter Tools The CNMM190612-HU5 WPP20G is an indexable turning insert developed for robust machining of steel; its geometry and grade target repeatable performance in industrial turning operations. Tiger·tec Gold coating for enhanced tool life Designed for steel machining (ISO group P) Rhombic 80° shape with 1.2 mm corner radius Negative 0° relief for stable turning Longer tool life through advanced coating technology The Tiger·tec Gold technology and the WPP20G grade deliver a combination of abrasion resistance and thermal stability that extends cutting edge life when machining steels. As a coated carbide solution, this insert reduces the frequency of index changes and supports higher cumulative cutting volumes before regrinding or replacement is required. The result is measurable process economy: fewer interruptions, lower tooling consumption per part and improved uptime. For engineers assessing cost-efficiency, the coated grade is designed to balance wear resistance with toughness, making it suitable across a broad range of unalloyed and alloyed steel components. Stable geometry for repeatable surface quality The insert’s Rhombic 80° shape and 1.2 mm corner radius provide a controlled contact geometry that reduces chatter and supports consistent surface finish on turned parts. The HU5 chipbreaker is tuned for medium to general-purpose steel machining and promotes predictable chip control, which is critical for unattended or high-volume turning. The 0° (negative) relief angle increases edge support in heavy feed or interrupted-cut situations, improving stability and reducing the risk of edge collapse. These geometric choices result in fewer reworked parts and more predictable machining windows, benefiting batch production and process standardisation. Process reliability and typical applications Designed for ISO group P (steel) applications, this grade and geometry pair is particularly effective for general engineering, shafts, and turned structural components where consistent material removal and repeatability are required. The insert’s tolerance class M and its series pedigree ensure consistent interchangeability and positioning in tool holders, aiding quick set-up and reproducible results across jobs. The CNMM190612-HU5 WPP20G insert is therefore a pragmatic choice for manufacturers seeking stable cycle times, reduced tool-related variance and improved throughput on turning centres and lathes. Contact Metav Werkzeuge for tailored cutting parameters and fast procurement of Walter Tools Tiger·tec Gold inserts and let the team advise on optimal insert sequencing for specific production demands Technical data Article number: CNMM190612-HU5-WPP20G-WALTER Designation: CNMM190612-HU5 WPP20G Type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Facts Insert size: 19 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Geometry: Rhombus 80° Chipbreaker: HU5 Thickness code: 06 Tolerance class: M Special features Coating technology: Tiger·tec Gold Material suitability: Steel (ISO group P) Design: Negative rake for stable cutting Application focus: General turning and medium-duty cuts Product family: Tiger-tec Gold FAQ What materials is this insert intended for? The CNMM190612-HU5 WPP20G insert is formulated for machining steel (ISO group P), covering unalloyed and alloyed steels typical in general engineering. How does the HU5 chipbreaker affect machining? The HU5 chipbreaker on this Walter Tools insert supports consistent chip formation and evacuation for medium to general steel turning operations, reducing the risk of built-up edge and improving surface quality. Can the insert be used for interrupted cuts? The negative 0° relief and the robust grade provide increased edge support, making the insert suitable for applications with intermittent engagement where stability is critical. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances thermal and abrasive resistance, which translates into longer tool life and more consistent performance across production batches. Is the geometry suitable for finishing or roughing? With a 1.2 mm corner radius and rhombic 80° form, the insert suits medium feeds and can be applied for both semi-finishing and productive general turning tasks, prioritising stability and surface consistency. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools is a registered brand. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarked product designations are mentioned solely for explanation and identification. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product of the manufacturer.
CNMM190612-HU5 WSM30S HU5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver performance, the WSM30S grade and a robust HU5 chipbreaker to secure reliable machining of stainless steel and heat‑resistant alloys; order the inserts directly via Metav Werkzeuge or consult our specialists for application support. CNMM190612-HU5 WSM30S Rhombic 80° turning insert by Walter Tools — coated carbide for stainless steel and superalloys The CNMM190612-HU5 WSM30S is a rhombic 80° turning insert engineered for heavy‑duty machining of stainless steel and heat‑resistant superalloys, combining a Tiger·tec Silver coating with a stable HU5 chipbreaker for dependable chip control. Tiger·tec Silver coating for wear resistance WSM30S grade for stainless steels and superalloys Rhombic 80° form for versatile turning operations 0° negative rake for heavy‑cut stability Enhanced productivity for stainless steel and heat‑resistant alloys The coated carbide combination of Tiger·tec Silver and the WSM30S grade delivers a balance of thermal stability and wear resistance that is particularly effective when machining stainless steel and nickel‑based alloys. The material pairing reduces flank wear under elevated temperatures and supports stable cutting edges during medium to heavy cuts. As a result, cycle times can be shortened and tool change intervals extended, making the insert a rational choice for production environments where consistent throughput and process reliability are priorities. Reliable chip control and edge stability for demanding cuts The HU5 chipbreaker geometry is designed to promote predictable chip formation when cutting tough materials that tend to produce long, stringy swarf. Combined with a 0° (negative) free angle, the insert resists cutting‑edge deformation and minimises the risk of built‑up edge formation, which is typical when machining heat‑generating alloys. This controlled chip flow supports safer machining and reduces interruptions, translating into fewer secondary operations and improved overall equipment effectiveness. Geometry that supports versatile turning strategies The Rhombus 80° shape with a 1.2 mm corner radius provides a versatile compromise between strength and surface finish. The modest corner radius enables secure entry into interrupted surfaces and offers an improved tool life compared with finer radii, while still achieving a good surface quality on roughing passes. The insert’s format and thickness code allow compatibility with a wide range of toolholders, providing flexibility across turning applications in mixed‑material production cells. Economic and operational benefits in production Using a coated, industry‑graded insert such as this results in a favourable cost‑per‑cut metric: longer edge life and the Tiger·tec Silver coating reduce downtime for regrinds and replacements. When paired with suitable cutting data and coolant strategies, the insert contributes directly to lower tooling costs and higher machine uptime. For operations transitioning from general‑purpose grades to a specialised solution for stainless steel and superalloys, the change commonly yields measurable gains in productivity and surface quality. Contact Metav Werkzeuge for tailored cutting data and swift supply of Walter Tools CNMM190612-HU5 WSM30S turning inserts and receive application advice from our technical consultants Technical Data Article number: CNMM190612-HU5-WSM30S-WALTER Type: Drehwendeschneidplatte / turning insert Designation: CNMM190612-HU5 WSM30S Facts Size: 19 mm Corner radius: 1.2 mm Free angle: 0° (negative) Thickness code: 06 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM30S (coated carbide) Chipbreaker: HU5 Insert form: Rhombus 80° Series / family: Tiger‑tec Silver Material applicability: stainless steel, heat‑resistant superalloys and titanium (as indicated by grade S and M) FAQ What materials is this insert suitable for? The CNMM190612-HU5 WSM30S insert is specified for machining stainless steel and heat‑resistant superalloys; the WSM30S grade targets toughness and thermal stability for these groups. How does the HU5 chipbreaker affect machining performance? The HU5 chipbreaker on this Walter Tools insert promotes controlled chip formation during turning, improving swarf evacuation and reducing the risk of built‑up edge when working with difficult‑to‑machine alloys. Is the insert geometry suitable for interrupted cuts? Yes, the rhombic 80° form combined with a 1.2 mm corner radius gives the insert sufficient strength for interrupted surfaces while maintaining acceptable surface finish on roughing passes. Does the negative free angle help with heavy cuts? The 0° (negative) free angle increases cutting‑edge support and reduces the likelihood of edge chipping under high cutting forces, making the insert well suited to heavy and semi‑finishing operations. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the manufacturers named. The article offered is an original, factory‑new product of the manufacturer.
CNMM190612-HU7 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP10G grade for increased cutting performance and stable wear behaviour; combine precise chip control with a robust HU7 chipbreaker to keep turning processes productive — order directly via Metav Werkzeuge or consult our team for cutting-data support. CNMM190612-HU7 WPP10G — turning insert (rhombic 80°) for steel, Walter Tools CNMM190612-HU7 WPP10G is a rhombic 80° indexable turning insert optimised for steel machining, combining a coated carbide grade with a dedicated chipbreaker for stable, productive cutting. Tiger·tec Gold coated carbide grade WPP10G HU7 chipbreaker for controlled chip formation Rhombic 80° geometry for versatile turning Corner radius 1.2 mm for robust edge strength Increase throughput with a wear-resistant cutting grade The Tiger·tec Gold coating together with the WPP10G carbide grade offers a measurable improvement in tool life when machining steels: the coated carbide resists abrasive wear and thermal load, which results in longer intervals between indexings and fewer tool changes. The applied technology is specifically designed for the heat and chip formation typical of steel turning, so the insert supports consistent cutting forces and repeatable surface quality. For production environments this translates into higher component throughput and lower process interruptions. Reduce rework through predictable chip control The integrated HU7 chipbreaker and the rhombic 80° shape deliver reliable chip formation across a range of feeds and depths of cut. The insert’s negative 0° clearance contributes to stable cutting geometry and a secure seating in the toolholder, while the corner radius 1.2 mm increases edge strength under interrupted cuts. Predictable chips reduce the risk of surface damage and machine stops, thereby lowering the incidence of rework and unplanned downtime in serial turning operations. Simple integration and reproducible results in daily turning With a standard plate size of 19 and tolerance class M, this indexable insert fits common holders and clamping systems used in turning centres. The designation CNMM190612-HU7 reflects the plate form and thickness coding, making tool selection and inventory management straightforward. The combination of a universal steel grade and a robust chipbreaker enables the insert to be specified for operations where reliable, repeatable outcomes are required, supporting quick set-ups and consistent component tolerances. Contact Metav Werkzeuge today for cutting parameters, holder recommendations and to source Walter Tools Tiger·tec Gold turning inserts directly via Metav Werkzeuge — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: CNMM190612-HU7-WPP10G-WALTER SKU: CNMM190612-HU7-WPP10G-WALTER Product type: Drehwendeschneidplatte / turning insert Brand: Walter Tools Series: Tiger-tec Gold Core specifications Plate size: 19 mm Corner radius: 1.2 mm Rake / clearance: 0° (negative) Thickness code: 06 Tolerance class: M Special features Grade: WPP10G (coated carbide) Chipbreaker: HU7 Plate form: Rhombus 80° Material application: Steel Execution: M FAQ What materials is this insert suitable for? The CNMM190612-HU7 WPP10G insert from Walter Tools is specified for machining steel; the WPP10G grade and Tiger·tec Gold coating are optimised for the thermal and wear conditions encountered when turning steel. Which chipbreaker should be chosen for general turning tasks? The HU7 chipbreaker on this insert is designed for controlled chip formation in a broad range of steel turning operations, providing a balance between chip control and surface finish. How does the negative 0° clearance affect clamping and cutting? A negative 0° clearance gives a secure seating and reduces the risk of insert movement under load; in combination with the rhombic 80° geometry it supports stable cutting forces and repeatable component tolerances. Can this insert be used for interrupted cuts or roughing? Yes, the corner radius 1.2 mm and the robust WPP10G coated carbide are well suited to operations with higher mechanical loads, including many roughing and interrupted cutting scenarios. How is the plate identified for ordering or inventory? The full identification CNMM190612-HU7 WPP10G indicates form, size and chipbreaker; use this designation when ordering to ensure the correct Walter Tools Tiger·tec Gold grade and geometry are supplied. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and trade names remain the property of their respective owners. Walter Tools is mentioned for clarification of product origin. There is no connection between our company and the mentioned brands. The offered item is original and factory new.
CNMM190612-HU7 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold coated carbide grade and an optimised HU7 chipformer to ensure reliable chip control and long tool life in steel turning; order the insert directly via Metav Werkzeuge or consult their specialists for application-specific cutting data. CNMM190612-HU7 WPP20G — Rhombic Turning Insert for Steel, Walter Tools The CNMM190612-HU7 WPP20G is a rhombic 80° turning insert, a coated carbide grade designed for productive machining of steel under industrial conditions Tiger·tec Gold coating for extended tool life Optimised HU7 chipformer for reliable chips Rhombic 80° geometry for versatile turning 0° negative rake with 1.2 mm corner radius Longer runtimes with Tiger·tec Gold coating and a coated carbide grade The combination of Tiger·tec Gold technology and the WPP20G grade provides a coated carbide surface engineered for wear resistance and thermal stability during turning of steels (ISO P). This coating reduces flank wear and helps maintain a sharp cutting edge over extended production runs, which translates into fewer indexings and less downtime. The technology is particularly useful where consistent component quality and process reliability are priorities, since the grade is designed to cope with the typical heat and chip formation encountered when machining a wide range of steel alloys. For customers seeking predictable tool life and repeatable results, this coating-grade pairing offers measurable process advantages. Robust geometry and chip control for consistent surface finish The insert’s Rhombic 80° shape combined with a 0° negative rake creates a robust cutting edge that resists chipping in interrupted cuts and heavy engagement. The integrated HU7 chipformer optimises chip separation and evacuation, improving coolant reach and reducing the risk of built-up edge. A corner radius 1.2 mm balances edge strength with achievable surface quality; larger radii increase tool life and support higher feed rates, while the negative rake contributes to a durable cutting edge under tough conditions. The tolerance class M ensures dimensional interchangeability in tool assemblies, supporting predictable set-up and tool change routines on production lines. Application advantages: productivity, versatility and process security Designed primarily for machining steel, the insert offers a versatile solution across general engineering and automotive turning tasks where stable chip formation and surface integrity are required. The CNMM190612-HU7 WPP20G indexable insert suits applications from roughing to medium finishing when paired with appropriate depth of cut and feeds; the coated carbide grade helps maintain cutting-edge stability for longer sequences. Because the design focuses on reliable chip control and edge protection, the insert contributes to improved productivity and reduced scrap rates in repetitive production. If there is any uncertainty about specific material grades or cutting parameters, Metav Werkzeuge can supply detailed recommendations and empirical cutting-data sheets to match the operation. Contact Metav Werkzeuge today for application advice and to request detailed cutting data for Walter Tools CNMM190612-HU7 WPP20G turning inserts Technical Data Article number: CNMM190612-HU7-WPP20G-WALTER Designation: CNMM190612-HU7 WPP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Plate size: 19 mm Thickness: 06 Corner radius: 1.2 mm Rake angle: 0° negative Tolerance class: M Special features Coated carbide grade WPP20G Chipformer HU7 Rhombic 80° shape Suitable for steel (ISO P) Series Tiger·tec Gold FAQ Is this insert suitable for stainless steel? This turning insert is formulated for steel (ISO P); stainless steel suitability is not specified for the WPP20G grade and alternative grades should be considered for austenitic stainless steels What does the HU7 chipformer deliver? The HU7 chipformer on this insert promotes predictable chip segmentation and evacuation, reducing the risk of long chips and supporting consistent surface quality during steel turning How does the 0° negative rake affect performance? A 0° negative rake provides a tougher cutting edge, beneficial for interrupted cuts and heavy engagement; it increases edge strength while slightly raising cutting forces compared with positive rake options Can the insert be used for finishing operations? With the corner radius 1.2 mm and the coated grade, the insert can be used for medium finishing where a balance of surface quality and tool life is required; final finish expectations depend on machine rigidity and cutting parameters What exactly is Tiger·tec Gold? Tiger·tec Gold is Walter’s multilayer coating technology applied to the WPP20G grade, engineered to enhance wear resistance and thermal stability during machining of steels Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM190612-HU7 WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the HU7 chipbreaker geometry to achieve consistent chip control and extended tool life in steel turning. The robust tolerance class M and the Rhombus 80° form ensure stable cutting behaviour and predictable results in serial production. Order the CNMM190612-HU7 WPP30G turning insert directly via Metav Werkzeuge or ask our consultants if needed. CNMM190612-HU7 WPP30G turning insert — Rhombus 80°, 1.2 mm corner radius (Walter Tools) CNMM190612-HU7 WPP30G is a Walter Tools turning indexable insert designed for efficient steel machining with a Tiger·tec Gold coated carbide grade Tiger·tec Gold coating for long tool life HU7 chipbreaker for reliable chip control Rhombus 80° geometry for versatile turning applications Tolerance class M for consistent dimensional accuracy Durable coating that raises productivity The Tiger·tec Gold coating delivers a balanced combination of wear resistance and toughness suited to the thermal and mechanical demands of steel machining. The WPP30G grade, a coated carbide, is optimised for continuous and interrupted cuts where controlled flank wear and edge stability matter. This results in fewer insert changes and more productive machining cycles, which improves overall process efficiency in medium-to-high volume turning operations. Geometry and chip control for safer cycles Built with a Rhombus 80° form and a HU7 chipbreaker, the insert promotes stable cutting forces and predictable chip formation when machining steels. The 1.2 mm corner radius increases edge strength for roughing passes while preserving surface quality during finishing passes. The 0° (negative) rake angle supports heavy-duty turning, reducing tool deflection and enabling secure clamping in a wide range of toolholders. Consistent quality under production conditions Tolerance class M and the proven construction of this insert help maintain repeatable part dimensions across batches. The thickness code 06 and size designation 19 correspond to standard holder interfaces, simplifying integration into existing tool systems. As a Walter Tools product from the Tiger·tec Gold family, the insert benefits from strict manufacturing control that supports reproducible results and extended service intervals in shop-floor environments. Clear material suitability and practical benefits This grade is expressly suitable for steel machining according to the P-group classification, making it a practical option for both unalloyed and alloyed steels. The combination of coating technology and chipbreaker design reduces downtime related to edge failure and poor chip evacuation, which helps to maintain a steady production rhythm. Where process reliability and predictable tool life are priorities, this insert provides a measurable contribution to operational stability. For steel turning tasks that demand reliable edge stability and efficient chip control, contact Metav Werkzeuge to discuss the CNMM190612-HU7 WPP30G Tiger·tec Gold insert and arrange purchase or technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CNMM190612-HU7-WPP30G-WALTER Article designation: CNMM190612-HU7 WPP30G Product type: Turning indexable insert Manufacturer: Walter Tools Facts Size designation: 19 Corner radius: 1.2 mm Free angle: 0° (negative) Thickness code: 06 Tolerance class: M Special features Grade/series: WPP30G / Tiger·tec Gold Chipbreaker: HU7 Geometry: Rhombus 80° Material application: Steel (P) Execution: M FAQ What materials is this insert suitable for? The CNMM190612-HU7 WPP30G insert is designed primarily for steel machining (ISO group P), including unalloyed and alloyed steels. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WPP30G grade improves wear resistance and edge stability, extending tool life and helping maintain consistent cutting forces during longer cycles. Which chipbreaker is fitted and what is its advantage? This insert features the HU7 chipbreaker, which delivers reliable chip control for both continuous and interrupted turning, reducing the risk of entangling chips and supporting safe evacuation. Is the insert suitable for heavy roughing? With a 1.2 mm corner radius and a 0° (negative) free angle, the insert provides edge strength and stability suitable for heavier roughing operations when used with an appropriate toolholder. How does tolerance class M benefit production? Tolerance class M ensures consistent dimensional accuracy across inserts, which supports repeatable part quality and simplifies tool management in serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory‑new goods of the manufacturer.
CNMM190616-HU3 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Walter Tools' Tiger·tec Gold coating and the robust HU3 chipbreaker in a rhombic 80° geometry for highly reliable steel machining and extended tool life; order the CNMM190616-HU3 WPP10G directly via Metav Werkzeuge or ask our consultants if needed. CNMM190616-HU3 WPP10G turning insert — Tiger·tec Gold coating, for steel machining (Walter Tools) The CNMM190616-HU3 WPP10G is a rhombic 80° indexable turning insert optimised for ISO P (steel) applications, combining a wear-resistant coated carbide grade with a chipforming geometry for consistent production results Tiger·tec Gold coated carbide Rhombic 80° geometry for versatile turning HU3 chipbreaker for stable chip control Negative rake 0° for robust cutting Optimised coating and grade for efficient steel turning The Tiger·tec Gold coating in combination with the WPP10G grade provides a balanced mix of wear resistance and toughness, reducing flank wear under typical steel cutting temperatures. Designed for the ISO P material group, this coated carbide grade copes with the heat and chip formation characteristics of unalloyed and alloyed steels, making it suitable for medium- to high-volume turning operations. The result is fewer tool changes and a more predictable process, which supports throughput and reduces downtime in series production. Geometry and chip control that stabilise machining The insert's rhombic 80° shape with a 1.6 mm corner radius and the HU3 chipbreaker produce controlled, short-to-medium chips and a reliable cutting edge engagement. The 0° (negative) relief angle increases robustness at the cutting edge, improving resistance to edge chipping in interrupted cuts or tougher steel grades. Together these features deliver process stability and surface finish consistency, while the defined corner radius assists in maintaining dimensional accuracy during turning operations. Practical benefits for workshop productivity and quality By combining a sturdy geometry with a technologically advanced coating, this indexable insert supports repeatable part quality and extended life under standard turning conditions. The balanced properties of the cutting grade mean conservative feeds and speeds are not required to achieve good performance, allowing shops to maintain cycle times without sacrificing tool life. For processors seeking predictable results and reduced rework, the combination of chip control, edge protection and a wear-resistant coating contributes directly to lower unit costs and higher shop-floor efficiency. Contact Metav Werkzeuge for application advice or to request a tailored recommendation for the CNMM190616-HU3 WPP10G from Walter Tools — technical consultants are available to discuss machining parameters and material compatibility Technical data SKU: CNMM190616-HU3-WPP10G-WALTER Label: Drehwendeschneidplatte CNMM190616-HU3 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Grade: WPP10G Series: Tiger-tec Gold Chipbreaker: HU3 Execution: M ISO designation: CNMM190616-HU3 WPP10G UID: CNMM190616-HU3-WPP10G-WALTER Facts Insert size: 19 mm Thickness: 6 mm Corner radius: 1.6 mm Relief angle: 0° (negative) Geometry: Rhombic 80° Tolerance class: M Special features Coating: Tiger·tec Gold Material: Coated carbide Application: Steel (ISO P) Chip control: HU3 chipbreaker Designed for robust cutting and long tool life FAQ What steels is this insert designed for? The CNMM190616-HU3 WPP10G is specified for ISO P materials; the WPP10G grade and Tiger·tec Gold coating are tuned for unalloyed and alloyed steels. How does the HU3 chipbreaker affect production? The HU3 chipbreaker on this turning insert promotes stable chip formation and evacuation, which improves process reliability and reduces machining interruptions for the CNMM190616-HU3 WPP10G. Can this insert handle interrupted cuts? Yes, the negative 0° relief angle and robust geometry of the CNMM190616-HU3 insert increase edge strength and make it suitable for intermittent or unstable cutting conditions. What corner radius should be chosen for finishing vs roughing? The 1.6 mm corner radius of this insert balances strength and surface finish; smaller radii are typically selected for fine finishing while this radius provides better stability for general turning. Is there application support for selecting cutting parameters? Application advisors can recommend feeds and speeds for the CNMM190616-HU3 WPP10G depending on the specific steel grade and machine setup; Metav Werkzeuge offers consultancy to match parameters to production goals. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
CNMM190616-HU3 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a proven WPP20G grade and precise Rhombus 80° geometry to ensure efficient, repeatable steel turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for tailored application advice. CNMM190616-HU3 WPP20G Rhombus 80° indexable turning insert for steel – Walter Tools, Tiger·tec Gold The CNMM190616-HU3 WPP20G is a rhombic 80° indexable turning insert designed for general steel machining, featuring a Tiger·tec Gold coated carbide grade for stable cutting performance. Tiger·tec Gold coated carbide grade WPP20G Optimised for steel machining (ISO P) Rhombic 80° geometry, 1.6 mm corner radius Consistent metal removal through advanced coating and grade The combination of the Tiger·tec Gold coating and the WPP20G carbide grade delivers consistent cutting performance when machining steel (ISO P). The coating enhances thermal resistance and reduces adhesive wear, which supports stable cutting at higher speeds and lengthens productive tool life. For operations where chip control and edge security matter, the coated grade provides a predictable wear pattern, helping to maintain dimensional accuracy over longer tool cycles. This makes the insert particularly suitable for shops prioritising efficiency and repeatable results. Geometry that improves stability and surface quality The Rhombus 80° form with a 1.6 mm corner radius and negative 0° relief offers a robust cutting edge for turning applications where rigidity and edge strength are required. The geometry reduces cutting forces on the toolholder and dampens vibration, which helps to produce improved surface finishes and reduces the risk of chipping in interrupted cuts. The HU3 chipbreaker is tuned to promote regular chip formation in steel, simplifying swarf management and reducing secondary operations. Practical benefits in the workplace and easy integration Designed as a drop-in solution for compatible toolholders, the insert combines industry-standard ISO dimensions with a universal steel-focused grade, simplifying inventory and tool selection. The medium tolerance class M and plate thickness code 06 ensure interchangeability with common holders and support repeatable clamping accuracy. Technical teams benefit from the predictable performance of a Tiger·tec Gold product, while production planners gain from reduced downtime thanks to fewer tool changes and stable wear behaviour. Contact Metav Werkzeuge for a machining evaluation or application recommendation for Walter Tools Tiger·tec Gold inserts and request tailored cutting data from our consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: CNMM190616-HU3-WPP20G-WALTER Article: CNMM190616-HU3 WPP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Product type: Drehwendeschneidplatte Facts Plate size: 19 Corner radius: 1.6 Relief angle: 0° (negativ) Plate form: Rhombus 80° Plate thickness code: 06 Tolerance class: M Special features Coating technology: Tiger·tec Gold Carbide type: coated hardmetal (WPP20G) Chipbreaker: HU3 Suitable for: Steel (ISO P) Geometry: negative 0° relief, robust edge Series designation: Tiger-tec Gold Execution: M FAQ What materials is this insert suitable for? The CNMM190616-HU3 WPP20G insert is specified for steel (ISO P) applications and the WPP20G grade is optimised for the heat and chip behaviour typical of such materials. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP20G grade improves thermal resistance and reduces adhesive wear, resulting in more consistent edge life and stable cutting during steel turning. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker promotes controlled chip formation in steel, aiding swarf evacuation and lowering the likelihood of entanglement, which benefits continuous and automated turning processes. Is the insert compatible with standard holders for CNMM geometry? The insert follows the CNMM190616-HU3 designation and is intended for holders matching the CNMM geometry and dimensioning; the medium tolerance class M supports consistent fit and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM190616-HU3 WPP30G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP30G grade for consistent tool life and reliable chip control; the rhombic 80° geometry with a 1.6 mm corner radius delivers stable turning of steel components and simplified insert indexing. Order the CNMM190616-HU3 WPP30G insert through Metav Werkzeuge or request application-specific machining data from the technical team. CNMM190616-HU3 WPP30G turning insert – Tiger·tec Gold grade for steel machining by Walter Tools CNMM190616-HU3 WPP30G is a rhombic 80° indexable turning insert designed for robust steel cutting applications in general engineering and production environments *Tiger·tec Gold coated WPP30G grade *Optimised HU3 chip control *Rhombic 80° geometry for reach *Corner radius 1.6 mm for stable cuts Greater process stability through optimised coating and grade The combination of Tiger·tec Gold coating with the WPP30G grade provides a balanced mix of wear resistance and toughness for conventional and demanding steel machining (ISO P). The coating reduces flank wear under thermal load while the carbide substrate maintains edge integrity, which translates into longer tool life and fewer interruptions on the shop floor. The HU3 chipbreaker is configured for controlled fracture and evacuation of chips during medium to heavy cuts, improving cycle-time consistency and reducing the need for manual chip handling. These technical choices support measurable productivity gains and predictable component quality. Geometry and dimensions engineered for dependable turning The Rhombic 80° form and the corner radius 1.6 mm deliver a compromise between accessibility and edge strength: the shallow approach angle increases reach for shoulders and noses, while the larger corner radius provides additional support at the cutting edge for interrupted cuts. The insert is produced to tolerance class M, ensuring repeatable seating and stable clamping in standard CNMM toolholders. The relief specification 0° (negative) supports robust engagement at higher feed rates and reduces the risk of edge chipping when machining tougher steel grades. These geometric features reduce rework and help maintain consistent surface finish across series production. Practical advantages for production and toolroom workflows As a coated carbide indexable insert, the CNMM190616-HU3 WPP30G allows quick tool changes and straightforward re-indexing, limiting machine downtime and simplifying inventory management. The system is optimised for unalloyed and alloyed steels according to ISO P, with the Walter grade map indicating a prioritised performance range that balances longevity (wear resistance) and toughness for mixed workloads. Integration into a standard turning toolset is seamless owing to the ISO designation, and documentation for cutting parameters can be supplied for feed, speed and depth recommendations to match specific part profiles. This results in cost-efficient machining through extended insert life and improved cycle stability. Contact Metav Werkzeuge for tailored cutting data, availability and delivery for the Walter Tools CNMM190616-HU3 WPP30G insert: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: CNMM190616-HU3-WPP30G-WALTER Designation: CNMM190616-HU3 WPP30G Manufacturer: Walter Tools Product type: Turning insert Series: Tiger-tec Gold Grade: WPP30G Numbers / Core technical data Size: 19 Thickness: 06 Corner radius: 1.6 mm Relief angle: 0° (negative) Tolerance class: M Designs / Special features Coating: Tiger·tec Gold Chipbreaker: HU3 Geometry: Rhombic 80° Material application: Steel (ISO P) Carbide type: coated hard metal FAQ Which materials is this insert suitable for? The CNMM190616-HU3 WPP30G turning insert (Walter Tools) is optimised for machining steels classified under ISO P, including unalloyed and alloyed steels. What characterises the WPP30G grade? WPP30G is a Walter Tools coated carbide grade in the Tiger·tec Gold family that balances wear resistance and toughness for stable performance during steel turning operations. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker on the CNMM190616-HU3 insert promotes controlled chip formation and evacuation when cutting steel, supporting consistent surface finish and easier handling of swarf. Is the insert compatible with standard CNMM toolholders? Yes, the ISO designation CNMM190616 indicates compatibility with CNMM-style toolholders and standard clamping systems for indexable turning inserts. When is a 1.6 mm corner radius recommended? A 1.6 mm corner radius is recommended when a balance between edge strength and surface finish is required; it is particularly suitable for operations that may encounter intermittent cutting or moderate interruptions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CNMM190616-HU5 WMP20G WMP20G Wendeplatten - Walter Tools
Combine high productivity with stable chip control thanks to the Tiger·tec Gold coating, the robust 1.6 mm corner radius and the 80° rhombic geometry for reliable stainless steel turning; order the CNMM190616-HU5 WMP20G directly via Metav Werkzeuge or ask our consultants for application support. CNMM190616-HU5 WMP20G – indexable turning insert by Walter Tools, Tiger·tec Gold, for stainless steel The CNMM190616-HU5 WMP20G is an indexable turning insert designed for machining stainless steel under medium to robust conditions, combining a coated cemented carbide grade with an HU5 chipbreaker for dependable chip formation Tiger·tec Gold coated insert Suitable for stainless steel (ISO M) 80° rhombic geometry for versatile turning 1.6 mm corner radius for robust edge Faster, more consistent machining with Tiger·tec Gold The coated carbide grade from the Tiger·tec Gold family provides a balanced combination of wear resistance and toughness, which translates into stable cutting edges and longer tool life in demanding stainless steel applications. The insert’s coating technology reduces built-up edge and thermal softening, enabling higher cutting parameters and more productive cycles. For operators and process engineers this means fewer tool changes, reduced machine downtime and improved part consistency, particularly when machining materials prone to work hardening and smearing. Geometry and chip control that support safe production The 80° rhombic geometry and integrated HU5 chipbreaker are engineered to ensure controlled chip flow and predictable cutting forces during turning operations. The positive benefits include improved surface finish and reduced risk of entanglement in automatic lathes. The 1.6 mm corner radius offers a compromise between edge strength and form accuracy, making the insert suitable for a range of finishing and semi-finishing tasks. For less experienced users, a brief explanation: the chipbreaker shapes and breaks the swarf so it evacuates reliably, lowering the chance of re-cutting and tool damage. Application focus, process reliability and economic advantages Specified for ISO group M, the grade addresses the challenges of stainless steel—notably high ductility and heat generation—by promoting secure chip formation and consistent edge life. This reliability supports cost-effective production through fewer interruptions and predictable regrinding or insert replacement intervals. Combined with the insert’s toleranzklasse M and negative relief, the design favours dimensional stability in repetitive turning cycles. Customers prioritising throughput and repeatability will find the insert a pragmatic choice for mixed-production environments where stainless steels are processed frequently. Contact Metav Werkzeuge for tailored machining recommendations and to discuss application-specific parameters for Walter Tools Tiger·tec Gold inserts Technical Data Article number: CNMM190616-HU5-WMP20G-WALTER Label: Drehwendeschneidplatte CNMM190616-HU5 WMP20G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Corner radius: 1.6 mm Plate size: 19 Plate thickness: 06 Relief angle: 0° (negativ) Geometry: Rhombus 80° Chipbreaker: HU5 Grade/Sort: WMP20G Series: Tiger-tec Gold Tolerance class: M Special features Coating: Tiger·tec Gold Material group: M (stainless steel applications) Execution: M SKU: CNMM190616-HU5-WMP20G-WALTER FAQ What materials is this insert suitable for? The CNMM190616-HU5 WMP20G is specified for ISO group M and is suitable for machining stainless steel under medium to robust conditions. How does the HU5 chipbreaker affect performance? The HU5 chipbreaker on this Walter Tools insert improves chip control and evacuation, which enhances surface quality and reduces the likelihood of re-cutting chips. What does the 1.6 mm corner radius mean for component finish? A 1.6 mm corner radius offers increased edge strength and good form stability, making the insert suitable for semi-finishing and finishing passes with consistent results. Is the insert compatible with automatic lathes and gang-tool setups? Yes, the 80° rhombic geometry and negative relief make the insert appropriate for a variety of turning setups, including automatic lathes where predictable chip flow is essential. Can the CNMM190616-HU5 WMP20G be used for roughing operations? While optimised for medium to robust cutting in stainless steel, the insert can be employed in heavier cuts where edge strength and chip control are required; consult cutting parameters for the specific application. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for clarification; there is no affiliation between our company and the mentioned brands. The offered item is original, brand-new merchandise from the manufacturer Walter Tools.
CNMM190616-HU5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating and the HU5 chipbreaker for reliable chip control and extended tool life; the rhombic 80° geometry and 1.6 corner radius deliver consistent surface quality in steel turning. Order the CNMM190616-HU5 WPP10G directly via Metav Werkzeuge or consult our technical advisors for tailored recommendations. CNMM190616-HU5 WPP10G turning indexable insert — Rhombic 80°, 1.6 corner radius (Walter Tools) The CNMM190616-HU5 WPP10G is a coated carbide turning insert engineered for efficient machining of steel, combining Tiger·tec Gold coating technology with an HU5 chipbreaker for predictable performance in general turning applications. Tiger·tec Gold coating for enhanced wear resistance Optimised HU5 chipbreaker for stable chip control Rhombic 80° geometry with 1.6 corner radius Suited for steel machining, versatile cutting grade Consistent wear resistance for longer productive runs The coated carbide grade WPP10G from the Tiger·tec Gold family is formulated to resist abrasive wear while maintaining edge stability under typical steel cutting temperatures. The coating system reduces flank and crater wear, translating into longer tool life and fewer insert changes during batch operations. For production planners this means reduced downtime and improved process reliability, as the grade is optimised for the thermal and mechanical stresses encountered when machining unalloyed and alloyed steel. The result is dependable performance across a broad range of turning tasks. Geometry and chip control that improve surface finish The Rhombic 80° shape and a 1.6 mm corner radius deliver a balanced combination of strength and accessibility for external and light shoulder turning. The HU5 chipbreaker is configured to produce controllable chip fragments during medium to heavy cuts, which aids in avoiding entanglement and protects the toolholder and workpiece finish. A 0° (negative) clearance angle provides a robust cutting edge for interrupted cuts and roughing passes, supporting consistent dimensional results and a reliable surface quality on the workpiece when correctly applied. Integration into workshop processes and material suitability Rated for applications in the ISO group P, this grade is specifically suited to a variety of steel machining tasks — from general turning to demanding roughing operations. The insert’s tolerance class M and the standard designation support straightforward toolholder selection and process planning. When combined with stable clamping and recommended cutting parameters, the insert contributes to predictable cycle times and repeatable part accuracy. For process engineers looking to standardise inserts, the CNMM190616-HU5 series offers a practical balance between tool life and machining productivity. For high-productivity steel turning with the Tiger·tec Gold WPP10G grade, contact Metav Werkzeuge for expert selection and prompt supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: CNMM190616-HU5-WPP10G-WALTER Designation: CNMM190616-HU5 ISO designation: CNMM190616-HU5 WPP10G Brand: Walter Tools Series: Tiger-tec Gold Chipbreaker: HU5 Tolerance class: M Facts Plate size: 19 Plate thickness: 06 Corner radius: 1,6 Plate form: Rhombus 80° Clearance angle: 0° (negativ) Special features Coated carbide grade WPP10G Suitability: Steel (ISO P) Optimised chip formation Robust geometry for interrupted cuts FAQ What materials is this insert suitable for? The CNMM190616-HU5 WPP10G insert is designed primarily for steel (ISO group P) applications and is optimised for typical steel chip formation and heat conditions. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating increases wear resistance and edge stability on the WPP10G grade, helping to extend insert life and maintain consistent cutting performance under steel turning conditions. Which chipbreaker should be selected for general turning? The HU5 chipbreaker fitted to this insert is suitable for a wide range of turning operations, offering stable chip control for medium to heavy cuts while supporting good surface finishes. What does the 0° (negative) clearance angle mean in practice? A 0° (negative) clearance angle provides a strong cutting edge that is particularly beneficial for interrupted cuts and roughing, improving resistance to edge chipping. Are there recommended applications for the 1.6 corner radius? The 1.6 mm corner radius balances edge strength and finish; it is well suited for general external turning and light shoulder machining where both robustness and surface quality are required. Trademarks and product names are the property of their respective owners. Mention of Walter Tools is for identification and explanation purposes only; no affiliation with our company is implied. The offered article is an original, brand-new product from the manufacturer. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CNMM190616-HU5 WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the HU5 chipbreaker to achieve stable chip control and long tool life, while the rhombic 80° geometry ensures secure edge strength for demanding steel turning applications. Order the CNMM190616‑HU5 WPP20G turning inserts directly via Metav Werkzeuge or ask our consultants for machining advice. CNMM190616-HU5 WPP20G turning indexable insert — rhombic 80°, Tiger‑tec Gold, for steel — Walter Tools CNMM190616-HU5 WPP20G is a rhombic 80° turning indexable insert with a HU5 chipbreaker, optimised for machining steel in industrial turning operations. CNMM190616-HU5 WPP20G Tiger‑tec Gold coating on coated carbide Rhombic 80° form with 1.6 mm corner radius Optimised for steel machining with HU5 chipbreaker Higher process stability through controlled chip formation The combination of the HU5 chipbreaker and the Tiger‑tec Gold coated carbide grade WPP20G delivers consistently shaped chips during conventional and interrupted cuts. This reduces the risk of built‑up edge and tool chatter, which in turn supports predictable cycle times and reduces scrap rates. The insert’s negative rake of 0° (negative) promotes increased edge strength, making the geometry particularly suitable for robust turning tasks where tool integrity is paramount. Explaining the technicalities: the coating reduces friction at the cutting zone and enhances wear resistance, while the chipbreaker geometry shapes the flow of material, improving evacuation and surface finish on steel. Geometry engineered for repeatable accuracy and surface quality The rhombic 80° form and the 1.6 mm corner radius provide a good balance between cutting edge strength and surface finish. The insert’s form factor supports axial and radial engagements common in a wide range of turning operations, enabling predictable contact conditions and reduced deflection. With tolerance class M, the insert meets industrial repeatability demands, contributing to consistent component roundness and dimension control. The profile also facilitates indexability and fast edge changes, keeping machine downtime to a minimum and supporting tight production schedules. Productivity advantages for serial production As a coated carbide solution, the grade emphasises long tool life and broad applicability across unalloyed and alloyed steels. The WPP20G grade within the Tiger‑tec Gold family targets general steel machining with improved wear resistance and stable edge behaviour; the result is fewer tool changes and a lower cost per part. In practice, stations that switch to this insert observe less process variation and improved throughput. The product’s build supports industrial users seeking efficiency gains without sacrificing surface integrity or increasing inspection workload. For application recommendations, batch availability or to secure a supply of Walter Tools CNMM190616‑HU5 WPP20G turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: CNMM190616-HU5-WPP20G-WALTER Designation: CNMM190616-HU5 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Facts Corner radius: 1.6 mm Insert size: 19 Thickness code: 06 Free angle: 0° (negative) Tolerance class: M Special features Rhombic 80° insert shape HU5 chipbreaker Coated carbide (Tiger‑tec Gold) Grade optimised for steel (P) Negative rake geometry Suitable for conventional and interrupted cuts FAQ What materials is this insert suitable for? The CNMM190616‑HU5 WPP20G turning insert by Walter Tools is optimised for machining steel (P) and is designed to handle the heat and chip formation typical for that material group. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WPP20G grade reduces friction and improves wear resistance, which increases tool life and supports consistent performance across production runs. What does the HU5 chipbreaker deliver in practice? The HU5 chipbreaker provides stable chip formation and reliable evacuation, improving surface finish and reducing the likelihood of chip‑related interruptions during turning. Is the negative rake angle important for heavy cuts? Yes, the 0° (negative) free angle increases edge robustness and helps maintain tool integrity in heavy cuts and interrupted machining, contributing to process security. Can this insert be used for finishing and roughing? With a 1.6 mm corner radius and rhombic profile, the insert is versatile enough for both stable roughing operations and productive finishing when parameters are adjusted accordingly. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
CNMM190616-HU5 WSM30S HU5 Wendeplatten - Walter Tools
Combine proven Tiger·tec Silver coating with a robust negative-rake geometry to ensure stable chip formation and extended tool life when machining stainless steel and heat-resistant alloys. Order the CNMM190616-HU5 WSM30S directly via Metav Werkzeuge or ask the consultants for tailored application advice. CNMM190616-HU5 WSM30S — Turning insert, Tiger·tec Silver, Walter Tools A precision CNMM190616-HU5 WSM30S turning insert designed for heavy-duty turning of stainless steel and demanding superalloys, providing consistent edge stability and repeatable performance in production environments. Tiger·tec Silver coated carbide Optimised for stainless steel and superalloys Rhombic 80° form, 19 mm size Chipbreaker HU5 for stable chip control Consistent edge stability for difficult-to-cut alloys The combination of the WSM30S grade and Tiger·tec Silver coating delivers a material system tuned for thermal resistance and wear protection. On stainless steel and high-temperature alloys the coated carbide supports stable chip formation and reduces the tendency for built-up edge, which directly lowers rework rates and extends the service intervals between indexings. This composition is particularly beneficial where sustained cutting temperatures and abrasive conditions would otherwise accelerate flank wear. Geometry that reduces cycle time and improves reliability The Rhombic 80° form and 19 mm designation provide a versatile geometry for a broad range of turning holders, while the 1.6 mm radius increases edge strength for interrupted cuts and heavier depths of cut. The 0° (negative) relief angle offers a supportive cutting face for demanding operations, and the HU5 chipbreaker is engineered to control swarf and promote short, predictable chips. Together these elements support higher metal removal rates and consistent surface finish without compromising tool life. Production-ready tolerances and process stability Manufactured to tolerance class M and delivered in execution M, the insert ensures repeatable seating and clamping accuracy, reducing setup variation and downtime. The coated hardmetal substrate provides a balance between toughness and wear resistance, so production teams benefit from fewer indexings and steadier cycle times. For application-specific cutting data or holder compatibility, Metav Werkzeuge can provide practical guidance tailored to the machining scenario. For application recommendations and delivery options for Walter Tools inserts, contact Metav Werkzeuge for an expert consultation and swift supply. Technical Data Article number: CNMM190616-HU5-WSM30S-WALTER Description: Drehwendeschneidplatte CNMM190616-HU5 WSM30S Walter Tools Series: Tiger-tec Silver Grade: WSM30S Chipbreaker: HU5 Brand: Walter Tools Execution: M Tolerance class: M ISO designation: CNMM190616-HU5 WSM30S Numbers Size: 19 Corner radius: 1.6 mm Thickness: 06 Relief angle: 0° (negative) Plate form: Rhombus 80° Special features Coated carbide (Tiger·tec Silver) Suitable for stainless steel (M) Suitable for heat-resistant superalloys / titanium (S) Optimised chip control with HU5 Robust edge for interrupted cuts FAQ What materials is this insert suitable for? The CNMM190616-HU5 WSM30S turning insert from Walter Tools is specified for stainless steel (M) and for heat-resistant superalloys and titanium (S), offering heat-resistant coating performance for both groups. How does the HU5 chipbreaker influence machining? The HU5 chipbreaker on the CNMM190616-HU5 WSM30S promotes short, controlled chips and consistent evacuation, improving surface finish and reducing the risk of chip-related interruptions during turning. What advantages does the Rhombic 80° form provide? The Rhombic 80° geometry used on this Walter Tools insert offers a balance of accessibility and strength, making the insert versatile for a range of turning operations while maintaining support at the cutting edge. Is the insert suitable for heavy cuts and interrupted turning? Yes. The negative 0° relief and a 1.6 mm corner radius provide the necessary edge support for heavier depths of cut and interrupted turning when using the CNMM190616-HU5 WSM30S. What should be considered when pairing with a toolholder? Select a holder that accepts the CNMM190616-HU5 form and secures the insert according to its tolerance class M; proper clamping and seat condition are essential to exploit the coated carbide's performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of Walter Tools.
CNMM190616-HU7 WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WPP10G carbide grade for extended tool life and stable chip formation when machining steel; the rhombic geometry and HU7 chipbreaker ensure versatile turning performance. Order genuine Walter Tools inserts via Metav Werkzeuge or consult our specialists for process optimisation. CNMM190616-HU7 CNMM190616-HU7 WPP10G Indexable turning insert — Tiger‑tec Gold by Walter Tools CNMM190616-HU7 WPP10G is an indexable turning insert designed for efficient steel turning operations, combining a durable coating and an optimised chipformer for consistent production results. Tiger‑tec Gold coating for long tool life Optimised HU7 chipbreaker for steel Rhombic 80° geometry for versatile turning 1.6 mm corner radius for robust cutting edge High productivity through coating and grade The combination of the Tiger‑tec Gold coating and the WPP10G coated carbide grade provides a high level of wear resistance and thermal stability for machining steel (material group P). This pairing reduces flank and crater wear under typical steel cutting temperatures, which directly lengthens tool life and lowers tool-change frequency. The result is a measurable improvement in process efficiency and a better cost-to-performance ratio for serial production. Geometry and edge design that improve reliability Featuring a rhombus 80° shape and a 0° (negative) clearance angle, the insert offers a secure cutting edge for a variety of turning tasks. The 1.6 mm corner radius increases edge strength for interrupted cuts and heavier engagement, while the HU7 chipbreaker promotes controlled chip formation in mid-range cutting conditions. These geometric choices translate into steadier forces on the toolholder and more predictable surface quality on the workpiece. Application guidance and process benefits Engineered for machining steel (P), the insert excels in general turning and semi‑finishing applications where reliable chip control and consistent tool life are required. The CNMM190616-HU7 geometry is suitable for both stable setups and situations with moderate vibration, offering a balance between productivity and surface integrity. For tailored cutting parameters or material-specific recommendations, Metav Werkzeuge advisers can provide machining data and process tips to match the specific production environment. Secure genuine Walter Tools Tiger‑tec Gold inserts through Metav Werkzeuge for reliable delivery and expert machining advice Technical data SKU: CNMM190616-HU7-WPP10G-WALTER Article label: Drehwendeschneidplatte CNMM190616-HU7 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Grade / Sort: WPP10G Facts Corner radius: 1.6 mm Plate size: 19 mm Plate thickness code: 06 Clearance angle: 0° (negative) Tolerance class: M Special features Coating series: Tiger‑tec Gold Chipbreaker: HU7 Shape: Rhombus 80° Material application: Steel (P) Series description: WPP10G — coated carbide for steel machining FAQ What materials is this insert designed to machine? The CNMM190616-HU7 WPP10G insert is optimised for steel (P) applications according to ISO 513; the WPP10G grade and Tiger‑tec Gold coating are selected for the typical heat and chip formation encountered when machining steel. Which chipbreaker is fitted and what is its purpose? The insert features the HU7 chipbreaker, designed to improve chip control and evacuation during medium to heavy turning operations, enhancing process stability and surface finish. How does the corner radius affect cutting performance? A 1.6 mm corner radius increases edge strength and wear tolerance, making the insert suitable for interrupted cuts and more robust engagement, which helps maintain consistent tool life. Is the insert suitable for finishing operations? The rhombic geometry and HU7 chipbreaker favour general turning and semi‑finishing; for fine finishing there may be alternative geometries or smaller corner radii better suited to very low feed finishes. What distinguishes the Tiger‑tec Gold series in daily production? Tiger‑tec Gold provides a combination of thermal and mechanical wear resistance that supports longer tool life and stable cutting in continuous production, resulting in fewer tool changes and improved overall productivity. Manufacturer: Walter Tools; Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM190616-HU7 WPP20G Wendeplatten - Walter Tools
Benefit from a hard-wearing cutting solution that pairs Tiger‑tec Gold coating with a proven rhombic geometry for reliable, productive steel turning; take advantage of the WPP20G grade for extended tool life and consistent chip control. Order the insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. CNMM190616-HU7 WPP20G indexable turning insert for Steel — Tiger‑tec Gold (Walter Tools) CNMM190616-HU7 WPP20G is a coated carbide indexable insert designed for demanding steel turning applications, offering a balance of wear resistance and versatility thanks to the Tiger‑tec Gold technology and HU7 chipbreaker. Tiger‑tec Gold coated carbide grade WPP20G Optimised for steel turning applications Rhombic 80° geometry for diverse facing and turning Corner radius 1.6 mm for edge robustness Productivity through a wear‑resistant grade The combination of the WPP20G grade and Tiger‑tec Gold coating delivers a measurable improvement in tool life under typical steel turning conditions. Coated carbide reduces flank wear and helps maintain a consistent cutting edge, which leads to fewer insert changes and higher machine uptime. This performance advantage translates directly into improved throughput and a better cost per component when machining unalloyed or alloyed steel. Geometry that supports stable cutting and versatility The rhombic 80° geometry with a 0° negative rake provides a robust edge suited to a wide range of turning operations, including light roughing and finishing passes. A corner radius of 1.6 mm increases edge strength and reduces the risk of chipping when encountering interruptions or variable feed conditions. These geometric choices promote dimensional consistency and reliable surface quality across batch production. Controlled chips and improved surface finish The HU7 chipbreaker is engineered to generate short, manageable chips when cutting steel, enhancing operator safety and process stability. Predictable chip formation reduces the likelihood of built-up edge and helps maintain a clean cutting zone, which supports improved surface finish and predictable tool wear rates. The insert’s design therefore contributes to fewer secondary operations and smoother downstream handling. Ready for production‑oriented setups With tolerance class M and an indexable format, the insert integrates easily into standard tool holders and turret systems. The indexable design allows quick orientation changes for multiple cutting edges, supporting continuous operation with minimal downtime. For specialised requirements or compatibility checks, Metav Werkzeuge can supply holder recommendations and machining parameters to match the production environment. Contact Metav Werkzeuge today for tailored advice on implementing the CNMM190616-HU7 WPP20G insert in steel turning operations and to confirm availability. Technical data SKU: CNMM190616-HU7-WPP20G-WALTER Article designation: CNMM190616-HU7 WPP20G Product type: Indexable turning insert Brand: Walter Tools Series: Tiger‑tec Gold Core data Geometry: Rhombic 80° Corner radius: 1.6 mm Free angle: 0° (negative rake) Size: 19 Thickness: 06 Grade: WPP20G Materials & features Material group: Steel (P) Chipbreaker: HU7 Tolerance class: M Design: M Coating/grade description: Coated carbide within Tiger‑tec Gold technology FAQ What materials is this insert intended for? The CNMM190616-HU7 WPP20G insert is formulated primarily for machining steel (ISO group P), with the WPP20G grade optimised for typical steel heat and chip formation. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold enhances the coated carbide’s wear resistance and thermal stability, allowing the insert to deliver longer tool life and more consistent results under continuous cutting conditions. What does the HU7 chipbreaker provide in practice? The HU7 chipbreaker produces short, controlled chips during steel turning, improving chip evacuation and contributing to a more stable cutting process and better surface quality. Is the insert suitable for finishing passes? Yes; the rhombic 80° geometry and the 1.6 mm corner radius make the insert appropriate for both light roughing and finishing operations when correct feeds and speeds are applied. How does tolerance class M affect use? Tolerance class M indicates a standard machining tolerance suited to general production; it supports repeatable positioning in common toolholders for reliable dimensional accuracy. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanation and identification only. There is no affiliation between our company and the named brands; the offered item is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com