CNMM190616-HU7 WPP30G WPP30G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WPP30G grade ensures extended tool life and consistent performance when turning steel, while the HU7 chipbreaker and 1.6 mm corner radius deliver controlled chip formation and robust edge strength — order the insert directly via Metav Werkzeuge or consult the sales team for application advice. CNMM190616-HU7 WPP30G turning insert by Walter Tools — Tiger·tec Gold, for steel The CNMM190616-HU7 WPP30G is a rhombic 80° indexable insert designed for general steel turning, combining a coated carbide grade with an optimised chipbreaker for reliable production machining Tiger·tec Gold coating for extended tool life Optimised HU7 chipbreaker for steel turning Rhombic 80° geometry for universal turning Corner radius 1.6 mm for robust edge strength Productivity gains from a coated Tiger·tec Gold grade The use of the Tiger·tec Gold coating technology and the WPP30G grade provides a measurable improvement in tool life and wear resistance when machining steels. Coated carbide grades combine a tough substrate with a multi-layer coating strategy to resist abrasion and adhesive wear; this results in longer intervals between indexings and fewer tool changes in batch production. For machining of unalloyed and alloyed steels (ISO group P), the coated grade moderates the thermal and mechanical stresses at the cutting edge, leading to steadier performance over longer cycles and a more predictable process window. Reliable chip control and consistent surface results Thanks to the HU7 chipbreaker geometry and the rhombic 80° shape, this indexable insert supports controlled chip breaking and evacuation under typical steel cutting conditions. The chipbreaker reduces the risk of long, stringy chips and assists in maintaining a stable cutting zone, which helps to protect the workpiece surface and tool edge. The negative 0° rake contributes to a robust cutting geometry that favours interrupted cuts and heavy roughing passes, while the 1.6 mm corner radius increases edge endurance and reduces chipping during demanding operations. Designed for production environments and process security The rhombic 80° form and the insert dimensions make this grade suitable for a wide range of turning applications, from roughing to semi-finishing, in serial production. The insert’s tolerance class M supports repeatable seating and predictable geometrical behaviour in tool holders designed for CNMM-style inserts. Combined with the coated grade’s wear properties, the result is improved process security and fewer unplanned stoppages — a direct benefit to throughput and overall productivity in a machining cell. Choose the Walter Tools Tiger·tec Gold grade for dependable steel turning and contact Metav Werkzeuge for application guidance and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CNMM190616-HU7-WPP30G-WALTER Label: Drehwendeschneidplatte CNMM190616-HU7 WPP30G Walter Tools SKU: CNMM190616-HU7-WPP30G-WALTER Manufacturer: Walter Tools Product type: Turning insert Grade/series: Tiger·tec Gold / WPP30G Facts Geometry: Rhombic 80° Corner radius: 1.6 mm Rake angle: 0° (negative) Plate size: 19 Thickness: 06 Chipbreaker: HU7 Tolerance class: M Special features Coated carbide grade WPP30G (Tiger·tec Gold) Optimised for ISO group P (steel) Robust edge for interrupted cuts and roughing Suitable for general turning applications FAQ Which materials is this insert suitable for? The CNMM190616-HU7 WPP30G is designed primarily for ISO P materials, meaning unalloyed and alloyed steels; the WPP30G grade is tuned to handle the heat and chip formation typical of steel turning. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold coating on the WPP30G grade enhances wear resistance and thermal stability, improving tool life and ensuring more consistent cutting performance across production runs. How does the HU7 chipbreaker influence machining? The HU7 chipbreaker promotes reliable chip control for steel turning, reducing long chip formation and aiding evacuation to keep the cutting zone clear and the surface finish consistent. Is the negative 0° rake suitable for roughing operations? Yes, the negative 0° rake provides a sturdy cutting edge that is well suited to interrupted cuts and robust roughing operations, improving edge strength and resistance to chipping. What does the tolerance class M indicate? Tolerance class M denotes standard dimensional accuracy for the insert, supporting reliable seating in compatible tool holders and consistent repeatability during indexings. Walter Tools: The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names mentioned here are the property of their respective owners. The named brand is cited for explanatory purposes only; there is no affiliation between our company and the mentioned manufacturers. The offered item is an original, brand-new product from the manufacturer. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CNMM190624-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
High wear resistance from the Tiger‑tec Gold coating combined with the CNMM190624‑HU3 geometry and a 2.4 mm corner radius delivers repeatable cutting performance and reliable chip control in steel turning operations. Order the CNMM190624‑HU3 WPP20G directly via Metav Werkzeuge or request application advice from our technical consultants. CNMM190624‑HU3 WPP20G Turning indexable insert — Tiger‑tec Gold for steel, Walter Tools CNMM190624‑HU3 WPP20G is a turning indexable insert engineered for productive steel machining, featuring Tiger‑tec Gold coating and an HU3 chipbreaker for controlled chip formation Tiger‑tec Gold coated carbide grade WPP20G Optimised HU3 chipbreaker for steel Rhombic 80° insert shape 2.4 mm corner radius for stable cutting Boosted productivity through tailored coating and grade selection The combination of the Tiger‑tec Gold coating and the WPP20G carbide composition is designed to increase machining efficiency when turning steels. The coating reduces flank and crater wear, so tool change intervals are extended and cycle times can be reduced without sacrificing process reliability. For the production environment, this means fewer interruptions and a higher throughput per tool life. The insert’s performance is particularly evident in medium to high cutting speeds where coating technology contributes to thermal stability and consistent edge life. Consistent chip control and surface quality from the geometry The rhombic 80° shape paired with the HU3 chipbreaker enables well‑formed chips and dependable evacuation in typical steel applications. A 2.4 mm corner radius provides a larger contact area, which stabilises the cut and helps to damp vibrations, improving surface finish and dimensional accuracy. The negative 0° free angle increases robustness for interrupted cuts and heavy‑duty turning tasks, so the insert withstands tougher engagement conditions while maintaining acceptable roughness values on the workpiece. Clear application range and simplified process planning This insert is classified for the ISO P group and is suited to a broad spectrum of steels, from high wear‑resistant to universal grades; the grade balance supports both productivity and tool life. The marked subdivision of the sort (10 wear‑resistant; 20 universal; 30/35 tougher) assists process engineers in selecting cutting data and feeds that match production aims. Selection is facilitated by the standardised CNMM190624‑HU3 designation, which aligns with established toolholder systems and reduces complexity in tooling logistics for batch production. Reliability, repeatability and brand assurance Designed by Walter Tools within the Tiger‑tec Gold family, the insert supports stable cutting edge behaviour and predictable performance in serial manufacturing. The robust construction and coating technology allow for repeatable results across shifts, aiding quality control and reducing rework rates. This combination of process certainty and tried‑and‑tested coating technology contributes to lower total tooling costs per produced component and a more efficient production flow. Contact Metav Werkzeuge for tailored tool recommendations and cutting data to match application demands of this Walter Tools Tiger‑tec Gold insert — technical advice and sample trials can be arranged via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CNMM190624-HU3-WPP20G-WALTER Designation: CNMM190624-HU3 WPP20G Product type: Turning indexable insert Brand: Walter Tools Series: Tiger‑tec Gold Facts Insert size: 19 Thickness code: 06 Corner radius: 2.4 mm Free angle: 0° (negative) Shape: Rhombus 80° Tolerance class: M Special features Coating: Tiger‑tec Gold (coated carbide) Grade: WPP20G Chipbreaker: HU3 Material application: Steel (ISO P group) Geometry: Negative insert Tolerance: M FAQ Which materials is this insert intended for? The CNMM190624‑HU3 WPP20G insert is specified for the ISO P material group and is optimised for machining various steels, covering wear‑resistant, universal and tougher steel grades as indicated by the grade classification. What cutting characteristics does the HU3 chipbreaker provide? The HU3 chipbreaker on this insert promotes controlled chip formation and evacuation when turning steel, supporting stable cutting forces and improved surface quality under typical turning conditions. How does the Tiger‑tec Gold coating benefit production runs? Tiger‑tec Gold coating enhances thermal and wear resistance, which translates into longer edge life, fewer tool exchanges and more consistent component quality over extended production sequences. Is the insert suitable for interrupted cuts and heavy engagement? Yes, the negative 0° geometry and the substantial corner radius provide increased mechanical strength and stability for interrupted cuts and robust turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM190624-HU3 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger‑tec Gold coated grade, a stable Rhombus 80° geometry and the HU3 chipbreaker for efficient steel turning; the result is consistent tool life and predictable chip control. Order the insert directly via Metav Werkzeuge or request application advice from the consultants. CNMM190624-HU3 WPP30G turning insert — Tiger‑tec Gold grade for steel (Walter Tools) The CNMM190624-HU3 WPP30G is an indexable turning insert designed for machining steel, combining a coated carbide grade with a robust rhombic geometry for industrial turning applications. Tiger‑tec Gold coated carbide grade WPP30G For steel machining (ISO group P) Rhombus 80° geometry for stable turning HU3 chipbreaker with 0° negative rake Proven wear resistance for demanding steel applications The WPP30G grade, part of the Tiger‑tec Gold family, is a coated carbide solution optimised for steel (ISO group P). The coating strategy improves wear resistance and thermal stability, which extends tool life under the heat and continuous chip formation typical of steel turning. Where predictable tool life and repeatable component tolerances are required, the combination of coated grade and consistent microstructure supports higher uptime and reduced regrinding or index changes. The design is intended to deliver an attractive balance between economy and performance in production environments. Geometry and chip control that stabilise the process The insert's Rhombus 80° form and 2.4 mm corner radius provide mechanical strength at the cutting edge and aid in distributing cutting forces evenly—this reduces vibration and helps maintain surface finish. The integrated HU3 chipbreaker is matched to the grade and the 0° negative rake, which together promote manageable chip formation during medium to heavy turning of steel. Improved chip control reduces secondary operations and increases operator safety while contributing to consistent machining results across batches. Practical integration and benefits for workshop throughput With a tolerance class M and the proven Walter Tools manufacturing standard, the CNMM190624-HU3 WPP30G insert is suitable for stable, repeatable mounting in common toolholders used in industrial turning. The insert supports a range of roughing and finishing tasks in steel turning, enabling longer intervals between index changes and reducing toolhandling time. Metav Werkzeuge can provide cutting data and batch supply options tailored to production requirements, supporting process reproducibility and faster ramp-up in series production. Contact Metav Werkzeuge for tailored cutting data, application recommendations and supply options for Walter Tools CNMM190624-HU3 WPP30G turning inserts Technical Data Article number: CNMM190624-HU3-WPP30G-WALTER Designation: CNMM190624-HU3 WPP30G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Shape: Rhombus 80° Size: 19 Corner radius: 2.4 mm Thickness: 06 Rake angle: 0° (negative) Tolerance class: M Special features Grade/coating: WPP30G (Tiger‑tec Gold coated carbide) Chipbreaker: HU3 Material suitability: steel (ISO P) Execution: M Series: Tiger‑tec Gold FAQ Which materials is this insert designed for? The CNMM190624-HU3 WPP30G insert is specified for machining steel and conforms to ISO group P, using the WPP30G grade for typical steel heat and chip formation. What chip control and rake characteristics does it have? This insert features the HU3 chipbreaker combined with a 0° negative rake, promoting reliable chip formation and evacuation when turning steel. What is the insert geometry and corner radius? The insert uses a Rhombus 80° geometry with a 2.4 mm corner radius, giving a robust cutting edge suited to stable turning operations. Is the grade coated and what benefits does the coating provide? The WPP30G grade is part of Tiger‑tec Gold and offers a coating that enhances thermal resistance and wear performance in steel turning applications. Can this insert be used for finishing as well as roughing? Yes; the combination of geometry and grade makes the CNMM190624-HU3 WPP30G suitable for a range of turning operations from roughing to medium finishing in steel components. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik group. Protected trademarks and product names are the property of their respective owners; they are mentioned here for explanatory purposes only. There is no connection between Metav Werkzeuge and the brands beyond the sale of original, factory-new products.
CNMM190624-HU5 WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WPP10G grade for consistently productive steel turning, paired with an HU5 chipbreaker and a 2.4 mm corner radius for stable chip control — order directly via Metav Werkzeuge or consult our specialists for application advice. CNMM190624-HU5 WPP10G indexable turning insert — Tiger‑tec Gold, for steel, Walter Tools The CNMM190624-HU5 WPP10G is an indexable turning insert designed for efficient steel machining, featuring a Tiger‑tec Gold coating and an HU5 chipbreaker for controlled chip formation. Tiger‑tec Gold coating WPP10G HU5 chipbreaker optimised for steel Rhombic 80° form with 2.4 mm corner radius Negative 0° rake for stable cutting Increased productivity through optimised grade and geometry The combination of the WPP10G grade and the Tiger‑tec Gold coating delivers higher productivity in steel turning by balancing wear resistance and toughness. The rhombic 80° insert geometry supports versatile tool setups and enables reliable engagement in common turning operations. By choosing this insert, workshops benefit from reduced tool changes and predictable tool life, which improves machine uptime and process throughput. Reliable chip control and surface quality for steel components Equipped with the HU5 chipbreaker, this insert is tuned for the thermal and mechanical characteristics of steel (ISO P). The chipbreaker promotes short, easily evacuable chips and reduces the risk of built‑up edge, resulting in a consistent surface finish and fewer interruptions in unmanned cycles. For production environments seeking repeatable results, the insert’s design supports stable cutting forces and improved dimensional accuracy. Coating technology explained for longer tool life The Tiger‑tec Gold coating enhances resistance to abrasive wear while maintaining edge toughness under intermittent loading. This coating strategy reduces flank and crater wear rates and extends the usable life of each indexable face. In practical terms, shops machining mixed batches of carbon and alloy steels will see improved tool life and fewer insert replacements, translating into lower production costs per component. Practical application and handling notes The negative 0° rake and the 2.4 mm corner radius make the insert suitable for medium to heavy turning where stability and robustness are priorities. The rhombic 80° shape allows for varied turning approaches and ease of indexing on common toolholders. For best results, pair the insert with suitable clamping systems and machining parameters adapted to steel; the insert is particularly effective in stable setups and turning operations that demand both productivity and surface integrity. For advanced steel turning with Walter Tools' Tiger‑tec Gold WPP10G insert, contact Metav Werkzeuge for application support and prompt supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CNMM190624-HU5-WPP10G-WALTER Name: CNMM190624-HU5 WPP10G indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Size: 19 mm Corner radius: 2.4 mm Thickness code: 06 Rake angle: 0° (negative) Tolerance class: M Special features Grade: WPP10G Coating: Tiger‑tec Gold Chipbreaker: HU5 Form: Rhombic 80° Material suitability: Steel (ISO P) Execution: M FAQ Is this insert suitable for stainless steel applications? The insert is specified for steel (ISO P); stainless steel suitability is not indicated for the CNMM190624‑HU5 WPP10G insert. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPP10G grade increases abrasive wear resistance while preserving edge toughness, resulting in longer tool life under typical steel turning conditions. Which chip shapes are produced with the HU5 chipbreaker? The HU5 chipbreaker promotes short, controllable chips suited to stable turning operations in steel, aiding reliable chip evacuation and reduced built‑up edge. Can the insert handle intermittent cuts or interrupted turning? With a negative 0° rake and a robust grade, the insert is designed to tolerate intermittent cutting better than highly positive‑rake geometries, offering improved edge stability during interrupted cuts. How should the CNMM190624-HU5 WPP10G be clamped and indexed? Use a secure clamping system compatible with rhombic 80° inserts and follow the toolholder manufacturer’s recommendations; indexing should be performed when wear limits are reached to maintain consistent performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
CNMM190624-HU5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coated grade and the robust HU5 chipbreaker for consistent steel turning results; the rhombic 80° geometry with a 2.4 mm corner radius ensures stable cutting and predictable tool life. Order the CNMM190624-HU5 WPP20G directly via Metav Werkzeuge or consult the Metav team for application advice. CNMM190624-HU5 WPP20G Walter Tools – Turning indexable insert with Tiger·tec Gold coating, for steel CNMM190624-HU5 WPP20G is a precision turning indexable insert designed for productive machining of steel components, combining a coated carbide grade with a HU5 chipbreaker for controlled chip formation Tiger·tec Gold coated, wear-resistant grade WPP20G Designed for steel machining (ISO group P) Rhombic 80° insert with 2.4 mm corner radius HU5 chipbreaker for controlled chip formation Extended process reliability through a modern coated grade The Tiger·tec Gold coating and the WPP20G carbide formulation deliver high wear resistance and consistent edge stability during turning of steel. Engineered for the thermal and mechanical demands of ISO group P materials, this coated insert reduces flank and crater wear under typical turning conditions. The coated substrate supports longer cutting intervals, which can translate into increased uptime on production lines and fewer tool changes. As a result, cycle times remain predictable and tool consumption is optimised for economical batch production. Robust geometry that prioritises cutting stability The rhombic 80° shape combined with a 2.4 mm corner radius provides a strong cutting edge that tolerates interrupted cuts and heavy cuts with reliable performance. The insert’s 0° negative free angle reinforces edge strength and helps maintain dimensional stability during roughing operations. This geometry aids in distributing cutting forces across the insert, reducing the risk of premature edge chipping and supporting reproducible component tolerances in serial machining environments. Controlled chip formation for improved surface quality Equipped with the HU5 chipbreaker, the insert promotes predictable chip segmentation and efficient evacuation when machining steels. The designed chipflow reduces the risk of long, stringy chips that can interfere with toolpaths or workpiece integrity, and it contributes directly to a better surface finish on the turned component. Where surface integrity and consistent finishing are required, the controlled chip behaviour helps minimise rework and supports continuous manufacturing workflows. Practical application notes and compatibility The insert is specified as size 19 with thickness code 06, fitting standard toolholders that accept CNMM-style turning inserts. Classified for steels (ISO group P), it is suited to a range of turning tasks from medium-duty roughing to finishing where a balance between tool life and edge robustness is required. The WPP20G coated carbide is positioned as a versatile, wear-resistant grade for shop-floor conditions, enabling stable results across mixed batches of unalloyed and alloyed steels. Contact Metav Werkzeuge for tailored application support on Walter Tools Tiger·tec Gold inserts and to arrange supply of the CNMM190624-HU5 WPP20G for efficient steel turning Technical data SKU: CNMM190624-HU5-WPP20G-WALTER Designation: CNMM190624-HU5 WPP20G Series: Tiger·tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Insert size: 19 Thickness code: 06 Corner radius: 2.4 mm Free angle: 0° (negative) Geometry: Rhombic 80° Chipbreaker: HU5 Tolerance class: M Special features Coated carbide grade WPP20G (Tiger·tec Gold) Optimised for steel (ISO group P) Designed for stable chip formation Robust edge for interrupted cuts Universal workshop and production use FAQ What materials is the CNMM190624-HU5 WPP20G best suited for? The CNMM190624-HU5 WPP20G is optimised for steels (ISO group P), handling unalloyed and alloyed steels with controlled wear behaviour using the Tiger·tec Gold coated grade. How does the HU5 chipbreaker benefit machining operations? The HU5 chipbreaker on this Walter Tools indexable insert promotes segmented chip formation and reliable evacuation, helping to improve surface finish and reduce downtime from problematic swarf. Which cutting situations benefit most from the 2.4 mm corner radius? A 2.4 mm corner radius offers enhanced edge strength for both medium-duty roughing and finishing operations, improving resistance to chipping in interrupted cuts and maintaining dimensional stability. Is the CNMM190624-HU5 suitable for heavy interrupted cuts? Yes, the rhombic 80° geometry and the 0° negative free angle provide a robust edge that tolerates interrupted cutting conditions, making it suitable for heavier engagements where edge security is essential. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer.
CNMM190624-HU7 WPP10G Wendeplatten - Walter Tools
Taking advantage of the Tiger‑tec Gold coating and a robust HU7 chipbreaker delivers consistent chip control and extended tool life for steel turning; order directly via Metav Werkzeuge or consult our specialists for machining parameter optimisation. CNMM190624-HU7 WPP10G turning insert — Tiger‑tec Gold coated carbide, negative rake 0° (Walter Tools) The CNMM190624-HU7 WPP10G is a rhombic 80° turning insert designed for efficient steel turning with optimised chip formation and reliable edge stability. Tiger‑tec Gold coating for long tool life HU7 chipbreaker for predictable chip control Rhombus 80° geometry for versatile turning Negative 0° relief for stable cutting forces Predictable chip formation and process stability The combination of a HU7 chipbreaker and the Tiger‑tec Gold coating targets the typical heat and chip formation of steel machining. This indexable insert promotes controlled chip segmentation and evacuation, reducing the risk of built‑up edge and interruptions in the production flow. The rhombic 80° form together with a negative 0° relief helps maintain a steady cutting force, which is particularly beneficial in interrupted cuts or variable depth turns. As a consequence, cycle times can remain consistent and tool‑change frequency is reduced, supporting productive machining operations. Durable, coated carbide for extended service life Manufactured in a coated carbide grade WPP10G, the cutting edge prioritises wear resistance while retaining toughness for standard steel applications. The coated carbide surface increases resistance to abrasive wear and improves thermal stability at elevated cutting speeds. The moderate corner radius of 2.4 mm provides a balance between edge strength and surface finish, making the insert suitable for both medium and more demanding roughing passes. These design choices result in higher process reliability and fewer unexpected tool failures on the shop floor. Geometry and handling advantages for workshop integration The insert’s rhombus 80° shape and the specified size facilitate fast orientation in common toolholders and adapt to a wide range of turning tasks. The M tolerance class ensures consistent seating and repeatability when replacing inserts, so setup time is minimised. Because the grade is specified for the steel group (P), the piece is engineered for the thermal profile of steel turning and offers straightforward selection for production engineers planning tool inventories. The coded thickness and size align with standard tooling systems, enabling easy stocking and interchangeability. Practical machining recommendations For stable results, pair the insert with a rigid toolholder and use cutting parameters recommended for coated carbide in steel: moderate to high cutting speeds, adjusted feed for the 2.4 mm corner radius, and coolant strategies suited to the chosen operation. The HU7 chipbreaker performs well in creating short, controllable chips under typical steel cutting conditions; where chip evacuation is critical, confirm toolholder orientation and coolant flow to support uninterrupted machining. Trial cuts under controlled conditions allow tuning of speed and feed to match the desired surface finish and tool life. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger‑tec Gold inserts and to arrange delivery or technical consultation through Metav Werkzeuge Technical Data SKU: CNMM190624-HU7-WPP10G-WALTER Designation: CNMM190624-HU7 WPP10G Series: Tiger‑tec Gold Manufacturer: Walter Tools Core data Size: 19 mm Corner radius: 2.4 mm Relief angle: 0° (negative) Thickness code: 06 Special features Coating: Tiger‑tec Gold Grade: WPP10G Chipbreaker: HU7 Application: Steel (P) Plate form: Rhombus 80° Tolerance class: M FAQ What materials is this insert suitable for? The CNMM190624‑HU7 WPP10G insert is designed for machining steel (ISO group P) and its grade and geometry are optimised for the heat and chip characteristics typical of steel turning. How does the HU7 chipbreaker affect performance? The HU7 chipbreaker produces controlled, segmented chips that improve evacuation and reduce the likelihood of built‑up edge, contributing to stable cutting and longer tool life with this Walter Tools insert. Can the insert be used for finishing passes? Yes; with appropriate feeds and speeds the insert’s 2.4 mm corner radius and coated carbide grade can achieve acceptable surface finishes, though the radius suits medium to semi‑finishing rather than ultra‑fine finishing operations. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating enhances wear resistance and thermal stability, resulting in improved tool life and consistent performance when turning steel with this indexable cutting plate. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered item is an original, brand‑new product from the manufacturer.
CNMM190624-HU7 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a high-performance insert that combines the Tiger·tec Gold coating with the WPP20G grade for reliable machining of Stahl; superior chip control and a robust negative rake enable continuous, high-productivity turning. Order the CNMM190624-HU7 WPP20G directly via Metav Werkzeuge or consult the Metav team for application-specific recommendations. CNMM190624-HU7 WPP20G — Turning indexable insert, Tiger·tec Gold, for Stahl (Walter Tools) the CNMM190624-HU7 WPP20G is a precision turning indexable insert designed for general turning of Stahl, offering a coated carbide grade and a dedicated chipbreaker for reproducible results Tiger·tec Gold coating for extended tool life WPP20G grade optimised for Stahl Rhombus 80° insert geometry HU7 chipbreaker for consistent chips 0° (negative) relief for robust cutting High process reliability through coated-grade performance The combination of the Tiger·tec Gold coating with the WPP20G grade delivers a measurable increase in wear resistance and machining stability when facing the thermal loads typical of Stahl turning. As a coated carbide solution, this insert reduces flank wear and maintains a stable cutting edge over longer tool lives, which in turn supports more predictable tool-change intervals and higher uptime. The result is tangible: fewer interruptions, consistent part quality and improved productivity in serial and batch production. Stable chip formation and surface quality with HU7 chip control Equipped with the HU7 chipbreaker and a 0° (negative) relief configuration, the insert ensures controlled chip formation even under interrupted cuts and variable feed conditions. The rhombus 80° geometry provides flexibility for a range of turning operations, while the corner radius 2.4 contributes to surface finish and edge strength. These features combine to offer reliable chip evacuation and reduced risk of built-up edge, which benefits both workpiece integrity and downstream processes. Practical handling and application benefits for the workshop The insert’s format and grade simplify tool selection for operations focused on Stahl: a coherent grade concept reduces set-up complexity and supports repeatable results across different machines. Walter Tools’ WPP20G sort stands out for a balanced combination of wear resistance and toughness, making it suitable for a broad spectrum of turning tasks. For customers seeking application advice or quick availability, Metav Werkzeuge provides technical consultation to match cutting data and tool holders with production goals. Contact Metav Werkzeuge for tailored cutting data, availability and application advice on Walter Tools CNMM190624-HU7 WPP20G indexable inserts Technical data SKU: CNMM190624-HU7-WPP20G-WALTER Designation: CNMM190624-HU7 WPP20G Product type: Turning indexable insert Brand: Walter Tools Series: Tiger·tec Gold Core specifications Insert size: 19 Thickness: 06 Corner radius: 2.4 Relief angle: 0° (negative) Tolerance class: M Special features Grade: WPP20G (coated carbide) Chipbreaker: HU7 Geometry: Rhombus 80° Material code: P (for Stahl) Series description: Tiger·tec Gold FAQ What materials is this insert intended for? The CNMM190624-HU7 WPP20G is designed primarily for machining Stahl; the WPP20G grade and Tiger·tec Gold coating are optimised for typical steel cutting conditions. How does the HU7 chipbreaker affect machining? The HU7 chipbreaker on this insert controls chip formation to produce consistent chip shapes, which improves evacuation and reduces the chance of built-up edge when turning Stahl. What are the benefits of the 0° (negative) relief angle? A 0° (negative) relief increases cutting-edge strength and stability under heavy or interrupted cuts; this configuration supports robust performance in demanding turning operations. Which geometry suits general turning tasks? The rhombus 80° geometry offers versatility for a wide range of turning applications, combining effective cutting access with safe insert indexing. Is the WPP20G grade suitable for high-speed cutting? WPP20G, with its Tiger·tec Gold coating, provides enhanced wear resistance and thermal stability, which contributes to reliable performance at elevated cutting speeds for Stahl. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are cited for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original and brand-new from the manufacturer.
CNMM190624-HU7 WPP30G WPP30G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold coating and the HU7 chipbreaker provides a high level of wear resistance and dependable chip control, resulting in longer tool life and fewer tool changes; order or request tailored advice via Metav Werkzeuge for smooth process integration. CNMM190624-HU7 WPP30G — Indexable turning insert (Tiger·tec Gold) by Walter Tools CNMM190624-HU7 WPP30G is an indexable turning insert optimised for steel turning applications, featuring a rhombic 80° geometry and Tiger·tec Gold coating for demanding production environments Tiger·tec Gold coated carbide for durability Suitable for steel machining (ISO P) Rhombic 80° insert for versatile turning HU7 chipbreaker for controlled chip formation Maximise tool life with advanced coating technology The Tiger·tec Gold coating and the WPP30G grade combine to deliver high resistance to abrasive wear and thermal loading when machining steels classified under ISO P. This coated carbide technology supports stable edge life, meaning fewer interruptions for tool changes and consistent component quality during longer production runs. For operations requiring predictable tool cycles, the improved wear behaviour contributes directly to machining economy and predictable maintenance intervals. Consistent chip control and reliable surface finishes The HU7 chipbreaker, paired with the rhombic 80° geometry and a 0° (negative) relief angle, provides controlled chip formation across a range of feed and speed conditions. The 2.4 mm corner radius enhances edge strength, reducing the risk of premature chipping while supporting steady cutting forces that help achieve consistent surface finishes. These features together increase process stability in medium to heavy turning operations and simplify parameter selection for new setups. Versatile fitment for workshop workflows With a compact 19 size and thickness code 06, this insert fits standard toolholders used in indexable turning applications and is manufactured to tolerance class M, aiding repeatable seating and reliable clamping. The insert is supplied as a coated carbide grade specifically for steel machining and is suitable for a broad range of unalloyed and alloyed steels. The designation CNMM190624-HU7 WPP30G identifies the geometry and grade clearly for ordering and inventory, enabling quick replacement and straightforward process documentation. Choose Walter Tools’ Tiger·tec Gold grade for production-proven stability and contact Metav Werkzeuge for availability and application support — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CNMM190624-HU7-WPP30G-WALTER Designation: CNMM190624-HU7 WPP30G Product type: Indexable turning insert Series: Tiger·tec Gold Grade: WPP30G Manufacturer: Walter Tools Core technical data Inscribed circle / size: 19 Corner radius: 2.4 mm Relief angle: 0° (negative) Thickness code: 06 Tolerance class: M Special features Coating: Tiger·tec Gold Material grade: WPP30G (coated carbide) Chipbreaker: HU7 Plate form: Rhombus 80° Application: steel (ISO P) Execution: M FAQ What materials is this insert best suited for? The CNMM190624-HU7 WPP30G insert from Walter Tools is designed primarily for steel machining (ISO P), including unalloyed and alloyed steels. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WPP30G grade increases wear resistance and thermal stability, improving edge life and reducing changeover frequency for continuous turning operations. What benefits does the HU7 chipbreaker provide? The HU7 chipbreaker offers controlled chip formation and evacuation, which supports consistent surface finish and process stability when using the rhombic 80° geometry. Is the insert compatible with standard toolholders? Yes — the 19 size and code 06 thickness are compatible with holders designed for CNMM-style rhombic 80° inserts and are manufactured to tolerance class M for repeatable seating. Can this insert be used for interrupted cuts or heavier cuts? The combination of a 2.4 mm corner radius and negative 0° relief provides edge strength suitable for many moderate interrupted and heavier turning applications on steels. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product of the manufacturer.
CNMM250924-HU3 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold coating and a robust WPP20G grade to achieve productive, repeatable turning of steel components; procure the insert directly through Metav Werkzeuge or request application guidance from our technical consultants. CNMM250924-HU3 WPP20G — Indexable turning insert with Tiger·tec Gold coating (Walter Tools) The CNMM250924-HU3 WPP20G is an indexable turning insert designed for general steel turning, offering a rhombic 80° geometry and a dedicated chipbreaker for stable chip control in medium to demanding operations Tiger·tec Gold coating for higher productivity WPP20G grade optimised for steel machining Rhombus 80° geometry with 2.4 mm corner radius 0° (negative) relief for secure edge support Boost in-process efficiency with advanced coating The Tiger·tec Gold coating, applied to a coated carbide substrate, reduces flank wear and extends tool life in continuous turning cycles. This technology is engineered to resist typical heat and abrasion encountered when machining steel, so production runs benefit from fewer insert changes and more predictable tool costs. The coating chemistry and microstructure are optimised for sustained cutting performance, which supports higher metal removal rates and consistent surface finish. Reliable chip control and cutting stability Equipped with the chipbreaker HU3, the insert delivers controlled chip formation for a wide range of cutting conditions common in steel machining. The combination of the Rhombus 80° shape and a 2.4 mm corner radius improves edge strength and reduces the likelihood of chipping under interrupted cuts. Stable chip flow and secure edge support translate into fewer process interruptions and improved part quality during turned components production. Geometry and grade matched to steel applications The WPP20G grade is specified for steel workpieces and balances wear resistance and toughness for universal performance across unalloyed and alloyed steels. The 0° (negative) relief angle provides robust support behind the cutting edge, making the insert suitable for harder engagement angles or heavier feed applications where edge security is essential. Tolerance class M ensures consistent seating and repeatability when replacing inserts in indexable toolholders. Practical procurement and application support The insert’s standard 25 mm size and recognised ISO-style designation simplify inventory management and toolholder compatibility checks. Technical teams can use the clear designation to match cutting parameters and toolholders quickly, while Metav Werkzeuge can supply recommended cutting data for specific steel grades and machining strategies. For process planners seeking to reduce set-up time, the standardised format and repeatable performance of this insert help shorten qualification cycles. Discuss application-specific cutting data and delivery with Metav Werkzeuge – request tailored advice for Walter Tools CNMM250924-HU3 WPP20G inserts via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: CNMM250924-HU3-WPP20G-WALTER Designation: CNMM250924-HU3 WPP20G Product type: Indexable turning insert Series: Tiger·tec Gold Grade: WPP20G Core data Plate size: 25 mm Corner radius: 2.4 mm Relief angle: 0° (negative) Plate thickness: 09 Tolerance class: M Features & Applications Coating: Tiger·tec Gold (coated carbide) Chipbreaker: HU3 Plate shape: Rhombus 80° Material application: Steel (P) Execution: M FAQ What materials is this insert intended for? The CNMM250924-HU3 WPP20G insert is formulated for machining steel (ISO group P), with the WPP20G grade optimised for a balance of wear resistance and toughness. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on this Walter Tools insert improves resistance to flank wear and abrasion, enabling longer tool life and more consistent machining performance in steel turning operations. Which chipbreaker is fitted and what is its effect? This insert features the HU3 chipbreaker, designed to produce short, controllable chips and support stable cutting over a range of feeds and depths typical in steel turning. Is the geometry suitable for interrupted cuts? The Rhombus 80° form combined with a 2.4 mm corner radius and 0° (negative) relief offers strong edge support, making the insert appropriate for many interrupted and heavy-engagement turning tasks. How does tolerance class M influence tool setup? Tolerance class M ensures consistent dimensions and repeatability when seating the insert in precision toolholders, reducing variability during index changes. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) is part of the global precision tooling community. Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only and indicate no affiliation; the offered item is an original, factory-new product of the manufacturer.
CNMM250924-HU7 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, precise chip control (HU7) and universal 80° geometry for high productivity and consistent part quality. Order the CNMM250924-HU7 WPP20G directly via Metav Werkzeuge or consult our specialists for tailor-made cutting data. CNMM250924-HU7 WPP20G — Indexable turning insert with Tiger·tec Gold coating by Walter Tools The CNMM250924-HU7 WPP20G is an indexable turning insert designed for reliable machining of Stahl, offering robust edge life and controlled chip formation for industrial turning applications. Tiger·tec Gold coating for extended edge life WPP20G coated carbide for universal performance Rhombic 80° geometry for versatile turning Chipbreaker HU7 for stable chip control Enhance machining efficiency with a coated grade built for Stahl The combination of the Tiger·tec Gold coating and the WPP20G grade yields a coated carbide solution optimised for the thermal and mechanical demands of machining Stahl. This wear-resistant coating reduces flank wear and extends cutting edge life, which leads to longer productive tool life and fewer index changes. Designed for broad applicability within ISO group P, the insert supports both unalloyed and alloyed steels and helps maintain consistent cycle times and surface quality under varied cutting conditions. Predictable chip control and geometry for steady production Geometry and chip control are decisive for stable processes: the rhombic 80° shape provides a versatile approach angle for general turning, while the negative rake 0° supports robust cutting under moderate to heavy cutting forces. The integrated chipbreaker HU7 regulates swarf formation to avoid long, entangling chips and to improve evacuation in both semi-finishing and finishing passes. With a corner radius 2.4 mm and a plate thickness 0.9 mm, this insert offers a balance between edge strength and dimensional accuracy, making it suitable for repeatable turning tasks. Broad application spectrum and process benefits in daily workshop use As a universal grade, WPP20G covers a wide range of machining scenarios: rated as a versatile sort within the Tiger·tec Gold family, it bridges the gap between wear resistance and toughness. The insert’s construction and tolerance class M support reliable seating and repeatability in standard CNMM toolholders, which simplifies tool management and reduces setup variability. By choosing a consistent, branded grade from Walter Tools, procurement and process engineers gain predictable tool life and fewer unplanned interventions, contributing to a more economical production flow. Contact Metav Werkzeuge for original Walter Tools Tiger·tec Gold inserts and precise cutting recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the CNMM250924-HU7 WPP20G and application-specific parameters Technical data SKU: CNMM250924-HU7-WPP20G-WALTER Designation: CNMM250924-HU7 WPP20G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Size: 25 mm Thickness: 0.9 mm Corner radius: 2.4 mm Free angle: 0° (negative) Geometry: Rhombus 80° Tolerance class: M Execution: M Special features Coating: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: HU7 Material application: Stahl Series description: Universal grade for steel machining FAQ What materials is this insert suitable for? The CNMM250924-HU7 WPP20G insert is optimised for ISO group P, i.e. for machining various types of Stahl including unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on the WPP20G grade reduces flank wear and improves heat resistance, which extends edge life and supports more consistent machining results. Which geometry features aid chip control during turning? Chip control is supported by the HU7 chipbreaker and the rhombic 80° geometry; together they encourage controlled swarf formation and reliable chip evacuation in turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are cited solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
CNMM250924-HU7 WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, stable chip control and precision geometry for efficient steel turning operations. Order the CNMM250924-HU7 WPP30G directly via Metav Werkzeuge or ask our consultants if needed. CNMM250924-HU7 WPP30G turning insert — Rhombic 80°, 2.4 mm corner radius — Walter Tools CNMM250924-HU7 WPP30G is a coated carbide turning insert optimised for machining steel under the Tiger·tec Gold technology, providing a balance of wear resistance and toughness. Tiger·tec Gold coating for long tool life Optimised for ISO P (steel) machining HU7 chipbreaker for stable chip control Rhombic 80° form with 2.4 mm corner radius Increase throughput with a wear-resistant grade The combination of the WPP30G coating and a coated carbide substrate delivers a measurable improvement in tool life and consistency when machining steels classified under ISO group P. The Tiger·tec Gold technology is engineered to reduce flank wear and extend usable tool life, which contributes directly to lower tooling costs per component and fewer interruptions for indexable insert changes. As a consequence, cycle times remain predictable and machine utilisation improves, supporting continuous production runs in batch or single-part environments. Stable chip flow and predictable process behaviour The HU7 chipbreaker paired with a 0° negative relief angle produces controlled chip formation and evacuation, which reduces the risk of built-up edge and vibration in medium to heavy cutting conditions. This geometry helps maintain surface finish and dimensional stability over longer tool lives, making the insert well suited for medium machining and finishing of steel components. The predictable chip form simplifies coolant and chip conveyor setup and supports higher cutting parameters where process reliability is required. Geometry tailored for repeatable precision The rhombic 80° shape and 2.4 mm corner radius provide a robust cutting edge while allowing favourable approach angles for versatility across turning tasks. This geometry offers a balance between edge strength and accessibility for shoulder and profile turning, reducing the likelihood of premature chipping on interrupted cuts. The insert’s designation signals a standardised form factor that integrates smoothly into established tool holders and tool-setting processes, ensuring repeatable results part after part. Practical application notes and integration into production Designed primarily for steel machining, the grade is classified for the typical thermal and chip-formation characteristics of carbon and alloy steels. The insert’s tolerance class M and execution M indicate consistent dimensional accuracy suitable for production environments where interchangeability and minimal manual adjustment are essential. For optimal results, combine the insert with appropriate cutting data derived from material hardness, depth of cut and feed; the Tiger·tec Gold performance tends to be especially beneficial where a mix of wear resistance and fracture toughness is required. Choose Walter Tools’ Tiger·tec Gold grade for reliable steel turning — contact Metav Werkzeuge for cutting data, availability and application advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: CNMM250924-HU7-WPP30G-WALTER Designation: CNMM250924-HU7 WPP30G Type: Turning insert (indexable) Brand: Walter Tools Numbers / Core technical data Plate size: 25 mm Corner radius: 2.4 mm Plate form angle: Rhombic 80° Relief angle: 0° (negative) Thickness designation: 09 Designs / Special features Series: Tiger·tec Gold Grade: WPP30G (coated carbide) Chipbreaker: HU7 ISO application group: P (steel) Tolerance class: M Execution: M FAQ Is this insert suitable for machining unalloyed and alloyed steels? Yes. The CNMM250924-HU7 WPP30G insert is engineered for ISO group P and is suitable for typical unalloyed and alloyed steel applications using the Tiger·tec Gold grade. What cutting tasks is the HU7 chipbreaker optimised for? The HU7 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, making it suitable for medium machining and finishing operations where stable chips and surface quality are required. Does the insert have a positive or negative relief angle and what is the effect? The insert features a 0° negative relief angle, which increases edge strength and is advantageous in robust cutting conditions and interrupted cuts, enhancing process security. What advantages does the rhombic 80° form and 2.4 mm corner radius offer? The rhombic 80° geometry with a 2.4 mm corner radius provides a compromise between edge strength and accessibility, enabling reliable shoulder and profile turning with reduced risk of edge chipping. Is this grade intended for stainless steel or non-ferrous materials? The CNMM250924-HU7 WPP30G is specified for ISO group P (steel). No application for stainless steel or non-ferrous materials is indicated in the provided data. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original factory-new merchandise of the manufacturer, Walter Tools.
CNMQ080508-A57T WAK15 Wendeplatten - Walter Tools
Benefit from a productive combination of sharp, uncoated carbide edges and geometry optimised for non‑ferrous metals; this yields efficient aluminium machining with stable chip control and predictable tool life. Order the CNMQ080508-A57T WAK15 directly via Metav Werkzeuge or consult the Metav Werkzeuge team for application advice. CNMQ080508-A57T WAK15 – Milling indexable insert for aluminium machining by Walter Tools The CNMQ080508-A57T WAK15 is a rhombic 80° milling insert engineered for high‑performance machining of aluminium and other non‑ferrous metals, featuring an A57T chipbreaker and an uncoated WAK15 grade. Uncoated WAK15 grade for soft metals Rhombic 80° insert form 0.8 mm corner radius for edge strength Optimised chipbreaker A57T for aluminium Consistent aluminium removal with low built‑up edge The insert delivers reliable material removal in aluminium applications thanks to the uncoated WAK15 carbide composition and a geometry tailored to non‑ferrous metals. The combination of a sharp cutting edge and the A57T chipbreaker reduces material adhesion, which minimises interruptions for manual cleaning and improves process stability. For production environments, this results in steady cycle times and a reduced need for secondary finishing, translating into measurable efficiency gains. Geometry that balances edge life and surface quality A rhombic 80° outline paired with a 0.8 mm corner radius provides a robust cutting edge that resists premature chipping while still enabling fine surface results on aluminium alloys. The 0° negative clearance supports a secure seating in toolholders and helps maintain consistent cutting forces during shoulder milling and light face milling. These geometric choices offer a balance between tool life and the finish quality expected in high‑volume machining. Series and grade for predictable performance As part of the Walter N‑grade system, the insert’s WAK15 designation specifies an uncoated carbide suited for aluminium and other non‑ferrous materials according to ISO 513 group N. The design and material selection aim for stable chip formation and repeatable performance, which supports process planning and tool‑change scheduling in manufacturing. The tolerance class M and execution Q ensure dimensional reliability for predictable mounting and indexing. Integration into machining strategies and benefits at scale When integrated into a systematic tooling strategy, the insert helps reduce overall machining costs by lowering scrap rates and minimising rework. The A57T chipbreaker assists in generating short, controllable chips that improve coolant interaction and reduce the risk of chip entanglement. For workshops processing large batches of aluminium components, this means fewer stoppages and a higher overall equipment effectiveness (OEE). For reliable aluminium milling solutions from Walter Tools, contact Metav Werkzeuge to request the CNMQ080508-A57T WAK15 insert and obtain specific machining recommendations by email or phone. Technical Data Article number / SKU: CNMQ080508-A57T-WAK15-WALTER Type: Milling indexable insert Series: Walter N‑Sortensystem Grade: WAK15 (uncoated carbide) Chipbreaker: A57T Form: Rhombus 80° Execution: Q Tolerance class: M Manufacturer: Walter Tools Dimensions & measurable data Insert size: 08 Thickness code: 05 Corner radius: 0.8 mm Peripheral relief / free angle: 0° (negative) ISO designation: CNMQ080508-A57T WAK15 Materials & Features Suitable for aluminium and other non‑ferrous metals (ISO group N) Uncoated carbide grade optimised for low adhesion Stable chip formation for productive milling Designed for predictable tool replacement and indexing FAQ What materials is this insert optimised for? The CNMQ080508-A57T WAK15 insert is optimised for aluminium and other non‑ferrous metals (ISO group N), using an uncoated WAK15 carbide to reduce material adhesion. How does the A57T chipbreaker affect machining? The A57T chipbreaker on this milling insert promotes short, controllable chips in aluminium machining, improving chip evacuation and reducing the risk of re‑cutting. What does the 0° negative free angle mean for toolholding? A 0° negative free angle ensures a secure seating in compatible toolholders and maintains stable cutting forces during shoulder and face milling operations. Can this insert achieve good surface finishes on aluminium? Yes; the rhombic 80° form combined with a 0.8 mm corner radius balances edge strength and surface quality for high‑finish aluminium machining when cutting parameters are set appropriately. Is the CNMQ080508-A57T WAK15 suitable for automated high‑volume production? The insert’s grade and chipbreaker are designed for consistent chip control and tool life, making it suitable for repeatable, high‑volume aluminium production runs. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Brand names are used for explanatory purposes only. The offered item is an original, factory‑new product from the manufacturer.
CNMQ080508-A57T WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger‑tec Silver coating, a robust WKP35S grade and precise rhombic geometry for consistent productivity in milling operations; order via Metav Werkzeuge or consult our specialists for process-matching recommendations. CNMQ080508-A57T WKP35S — indexable milling insert (Tiger‑tec Silver) by Walter Tools The CNMQ080508-A57T WKP35S is an indexable milling insert engineered for productive machining of steel and cast iron in industrial milling applications. Tiger‑tec Silver coated carbide grade WKP35S Designed for steel (P) and cast iron (K) Rhombic 80° geometry, 0.8 mm corner radius 0° negative rake for stable cutting performance Consistent cutting performance for steel and cast iron The coated carbide WKP35S grade from the Tiger‑tec Silver series is optimised for the thermal and abrasive demands of machining steel (P) and cast iron (K). The coating and substrate combination promotes stable chip formation and improved wear resistance, which leads to longer tool life and fewer tool changes. This technical pairing supports a reliable machining window, allowing higher material removal rates while maintaining predictable edge behaviour under typical production loads. Geometry that balances strength and surface quality The rhombic 80° form with a 0.8 mm corner radius provides a favourable compromise between edge robustness and accessible cutting geometry for a variety of cutter bodies. The 0° negative rake increases the insert’s resistance to edge chipping during heavy cuts, while the A57T chipbreaker aids consistent chip control in mixed chip forms. Together these features enhance process stability and contribute to reproducible surface finish and dimensional consistency in series production. Practical integration and process benefits Tolerance class M and the standard plate dimensions ensure compatibility with common milling tool holders and cutter systems, simplifying tool inventory management. The insert’s specification supports both roughing and semi-finish strategies where reliable indexable inserts are required. For complex applications or material blends, technical consultation is available to align cutting data and holder choice with the insert’s capabilities, helping to secure higher throughput and predictable cycle times. Contact Metav Werkzeuge for tailored tooling recommendations on Walter Tools inserts and to discuss cutter compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CNMQ080508-A57T-WKP35S-WALTER Label: Fräswendeschneidplatte CNMQ080508-A57T WKP35S Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Facts Corner radius: 0.8 mm Rake angle: 0° (negative) Plate form: Rhombus 80° Plate size: 08 Plate thickness: 05 Tolerance class: M Special features Coating: Tiger‑tec Silver Substrate: Coated carbide (described as coated hardmetal) Chipbreaker: A57T Material suitability: Steel (P) and Cast iron (K) Execution: Q FAQ What materials is this insert suitable for? The CNMQ080508-A57T WKP35S insert is specified for machining steel (P) and cast iron (K) according to the manufacturer’s material group classification. How does the 0° negative rake affect cutting? A 0° negative rake increases edge strength and reduces the risk of chipping under heavy loads, making the insert well suited to robust milling operations. Which chipbreaker is used and what is its benefit? The insert features the A57T chipbreaker, designed to promote consistent chip control and improved evacuation across varying cutting depths. Is the insert compatible with standard milling cutters? The rhombic 80° form and tolerance class M conform to common insert geometries, enabling compatibility with many standard milling cutter bodies that accept CNMQ-type inserts. How does the Tiger‑tec Silver coating influence tool life? The Tiger‑tec Silver coating enhances wear resistance and thermal stability, which typically leads to extended tool life and more stable performance across machining cycles. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation and identification. There is no connection between our company and the mentioned brands. The offered article is an original, brand-new product from Walter Tools.
CNMQ080508-A57T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP35G grade in a compact rhombic 80° geometry to achieve consistent, economical steel machining; order directly via Metav Werkzeuge or consult the technical team for process recommendations. CNMQ080508-A57T WPP35G rhombic 80° milling insert, Tiger·tec Gold coating for steel — Walter Tools The CNMQ080508-A57T WPP35G is a negative 0° rhombic 80° indexable milling insert designed for efficient steel machining with controlled chip formation. Tiger·tec Gold coating for extended tool life Optimised for steel machining (ISO group P) Rhombic 80° shape with 0.8 mm corner radius Negative 0° clearance for secure chip control High-performance cutting for steel components The coated cemented-carbide grade WPP35G, paired with the Tiger·tec Gold technology, provides a balance of wear resistance and toughness specifically tailored to steel applications (ISO group P). The combination of a rhombic 80° geometry and a 0° negative rake angle stabilises the cutting edge under typical steel machining temperatures, which results in consistent surface finish and reduced process variability. For machining centres and robust milling operations, this insert delivers predictable flank wear and allows longer intervals between indexing, directly supporting higher machine uptime and stable production. Precise chip control and process reliability Equipped with the A57T chipbreaker, this insert promotes controlled chip formation and evacuation in through-cut and profile milling of steels. The 0.8 mm corner radius enhances edge strength and contributes to improved tool life when encountering interrupted cuts or variable workpiece hardness. The negative geometry combined with the chipformer design reduces vibration and the risk of built-up edge, which helps to maintain dimensional stability across series parts. Operators and process engineers benefit from a reduction in unscheduled stops and an increase in reproducible results across shifts. Long-term economy through consistent wear behaviour By focusing on a coated grade that is optimised for common steel alloys, the insert supports cost-effective production: fewer indexings, less scrap from surface defects and steadier tolerance adherence over tool life. The Tiger·tec Gold coating improves resistance to flank and crater wear while the substrate provides the toughness needed for interrupted cutting, leading to a favourable lifecycle cost per workpiece. For procurement and planning, using a standardised insert geometry like the rhombic 80° simplifies tool holding setups and inventory management, contributing to lower overall process costs without compromising on component quality. For robust milling performance with Walter Tools' Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored application advice and immediate availability via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: CNMQ080508-A57T-WPP35G-WALTER Designation: CNMQ080508-A57T WPP35G Product type: Milling insert (indexable) Manufacturer: Walter Tools Facts Shape: Rhombus 80° Clearance: 0° (negative) Corner radius: 0.8 mm Size designation: 08 Thickness designation: 05 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP35G (coated cemented carbide) Chipbreaker: A57T Material suitability: Steel (ISO group P) Series: Tiger·tec Gold FAQ What materials is this insert suitable for? The CNMQ080508-A57T WPP35G is formulated for machining steel (ISO group P), including unalloyed and alloyed steels. How does the A57T chipbreaker improve milling performance? The A57T chipbreaker on this insert supports controlled chip formation and evacuation, reducing the likelihood of long, entangling chips and improving process stability during steel milling. What benefit does the rhombic 80° geometry provide? A rhombic 80° geometry offers a favourable balance between strength and accessibility for shoulder and face milling, aiding stable cutting and straightforward toolholder compatibility. Is the coating suitable for interrupted cuts? Yes; the Tiger·tec Gold coating combined with the substrate toughness of the WPP35G grade is designed to withstand the thermal and mechanical demands of interrupted cutting in steel. How does the 0.8 mm corner radius affect component finish? A 0.8 mm corner radius increases edge robustness and helps maintain a consistent surface finish while reducing the risk of chipping on entry or exit. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools: The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and belongs to the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no connection between our company and the mentioned brands. The offered item is an original factory-new product of the manufacturer.
CNMQ120608-A57T WKP35S Wendeplatten - Walter Tools
High wear resistance and broad material compatibility ensure reliable performance; the WKP35S Tiger‑tec Silver grade and the rhombic 80° geometry provide stable chip control and extended tool life. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific selection. CNMQ120608-A57T WKP35S indexable milling insert — Tiger‑tec Silver, for steel and cast iron (Walter Tools) The CNMQ120608-A57T WKP35S is a rhombic 80° indexable milling insert engineered for productive machining of steel (P) and cast iron (K), combining a coated‑carbide substrate with a robust chipbreaker for consistent results. Tiger‑tec Silver coating WKP35S grade, coated carbide Rhombic 80° geometry 0° negative rake, 0.8 mm corner radius Versatile material compatibility for fewer tool changes The insert is designed for machining both steel and cast iron, corresponding to ISO material groups P and K; this broad compatibility reduces tool inventory and simplifies process planning. The substrate and coating combination, optimised for the thermal and abrasive demands of these groups, enables predictable chip formation and extended service intervals. Presented material capabilities allow planners to consolidate operations where previously multiple grades were required, improving workflow efficiency. Coating and grade that extend tool life and stability The Tiger‑tec Silver coating together with the WKP35S grade creates a wear‑resistant surface that preserves the cutting edge under typical milling loads. The coated‑carbide construction is tailored to resist abrasion and maintain edge stability, which translates into longer effective tool life and fewer unscheduled tool changes. For production environments where uptime and consistent part quality matter, this combination supports higher productivity and reduced overall tooling costs. Geometry engineered for robust cutting performance The rhombic 80° shape and the 0° negative rake contribute to a mechanically strong cutting edge that tolerates heavier cuts and interrupted milling. The 0.8 mm corner radius balances edge strength with surface finish, making the insert suitable for a range of finishing and semi‑finishing passes. The integrated A57T chipbreaker promotes controlled chip evacuation, which reduces the risk of recutting and helps maintain surface integrity on the workpiece. Process reliability and practical application guidance The insert’s construction supports stable cutting under varying conditions, providing predictable tool behaviour and repeatable results across batch runs. For process integration, the designation and series data serve as a direct basis for tooling lists and CAM setup parameters. For tailored recommendations on grade selection, toolholder pairing or cutting parameters, Metav Werkzeuge offers consultative support and can assist with optimisation for specific machine and workpiece combinations. For application‑specific advice on Walter Tools Tiger‑tec Silver WKP35S inserts or to place an order, contact Metav Werkzeuge’s technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance and delivery options. Technical data Article number: CNMQ120608-A57T-WKP35S-WALTER Name: Fräswendeschneidplatte CNMQ120608-A57T WKP35S Brand: Walter Tools Facts Corner radius: 0.8 mm Plate form: Rhombus 80° Free rake angle: 0° (negative) Plate size: 12 Thickness designation: 06 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKP35S Chipbreaker: A57T Substrate: coated carbide Material compatibility: P (steel), K (cast iron) Execution: Q FAQ What materials is this insert suitable for? The CNMQ120608-A57T WKP35S insert is specified for ISO groups P and K, making it suitable for steel and cast iron machining applications. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating on the WKP35S grade enhances wear resistance and edge stability, which helps to extend tool life and maintain consistent cutting performance under industrial milling conditions. What is the effect of the 0° negative rake on cutting? A 0° negative rake increases edge robustness and is advantageous for heavier cuts or interrupted milling; the geometry contributes to mechanical strength and process reliability. Which chipbreaker is integrated and what does it do? The insert features the A57T chipbreaker, which promotes controlled chip formation and evacuation to reduce the risk of recutting and improve surface quality. Is this insert suitable for finishing operations? With a 0.8 mm corner radius and rhombic 80° geometry, the insert can be used for certain finishing and semi‑finishing passes, offering a balance between edge strength and surface finish. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMQ120608-A57T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and a purpose‑built A57T chipbreaker for consistent machining of steel components; order directly via Metav Werkzeuge or contact our consultants for tailored advice. CNMQ120608-A57T WPP35G indexable milling insert — Tiger‑tec Gold, for steel (Walter Tools) A CNMQ120608-A57T WPP35G indexable milling insert engineered for productive steel machining, offering durable coated carbide and stable cutting action in industrial milling operations Tiger‑tec Gold coated carbide for high wear resistance Optimised for steel machining (ISO group P) Rhombic 80° form with 0.8 mm corner radius Negative rake 0° for stable cutting action A57T chipbreaker for predictable chip control Longer tool life through advanced coating and material The application of Tiger‑tec Gold coating to coated carbide substrates improves wear resistance and maintains a stable cutting edge under the heat and pressures typical of steel machining. This leads to fewer insert changes and more predictable tool costs over production runs. The choice of coated hardmetal is particularly relevant where repeatability and surface finish matter, as the coating reduces abrasive and adhesive wear mechanisms without affecting the insert's toughness. Predictable chip formation and process security With an integrated A57T chipbreaker and a rhombic 80° geometry, the insert provides controlled chip flow and reduced risk of re-cutting. The chip control design supports stable, continuous cutting in face and shoulder milling applications, simplifying chip evacuation and reducing tool nose wear. The negative rake 0° further contributes to a robust cutting edge, beneficial for high‑feeding operations and interrupted cuts common in workshop and production environments. Geometry and dimensions tuned for industrial milling The combination of an 80° rhombic shape and a 0.8 mm corner radius balances edge strength with achievable surface quality. The geometry supports both roughing and light finishing passes, delivering consistent component tolerances while limiting edge chipping. For machining centres and milling heads where insert indexing and repeatability are valued, this form factor helps maintain effective cutting parameters and low setup times. Application focus and material compatibility Developed for ISO group P materials, the grade is optimised for unalloyed and alloyed steel, addressing the typical thermal loads and chip formation characteristics of these substrates. The insert’s composition and configuration make it well suited for machining tasks where dimensional stability and reliable tool life are priorities, such as component production, toolroom operations and series manufacturing. Selection of cutting parameters should follow standard recommendations for coated carbide in steel machining. Contact Metav Werkzeuge for application recommendations and availability for the Walter Tools CNMQ120608-A57T WPP35G insert optimised for steel machining Technical Data Article number: CNMQ120608-A57T-WPP35G-WALTER Designation: CNMQ120608-A57T WPP35G Manufacturer: Walter Tools Product type: indexable milling insert Facts Insert size: 12 Thickness code: 06 Corner radius: 0.8 Relief / rake: 0° (negative) Form: Rhombus 80° Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP35G Chipbreaker: A57T Material: coated carbide Application: steel (ISO group P) Execution: Q FAQ What materials is this insert intended for? The CNMQ120608-A57T WPP35G is specified for ISO group P materials, meaning it is optimised for machining various types of steel. How does the Tiger‑tec Gold coating benefit production runs? The Tiger‑tec Gold coating on the insert improves wear resistance and edge stability, which contributes to longer intervals between indexings and more consistent part quality. Which chip conditions does the A57T breaker address? The A57T chipbreaker produces regular, controllable chips in typical steel cutting conditions, aiding evacuation and reducing risk of entanglement. Is the geometry suitable for both roughing and finishing? Yes, the rhombic 80° form combined with a 0.8 mm corner radius provides a balance of edge strength and surface finish capability suitable for a range of milling passes. Can this insert be used for interrupted cuts? The negative rake 0° and robust coated carbide construction offer increased edge stability, making the insert appropriate for operations that include interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
CNMQ120608T-A27T WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, broad material applicability and consistent edge life to maintain productive machining cycles; order the inserts directly through Metav Werkzeuge or contact the technical consultants for application-specific advice. CNMQ120608T-A27T WKP35S Fräswendeschneidplatte by Walter Tools — Rhombus 80°, negative relief 0° CNMQ120608T-A27T WKP35S Fräswendeschneidplatte is a coated carbide cutter insert designed for productive milling of steel and cast iron components Tiger·tec Silver coating technology WKP35S grade for steel and cast iron Rhombic 80° geometry with 0° relief Corner radius 0.8 mm for robust cutting edges Exceptional productivity for steel and cast iron machining The combination of the Tiger·tec Silver coating and the WKP35S grade provides a balanced mix of wear resistance and reliable cutting-edge stability, optimised for the typical heat and chip characteristics of steel (ISO group P) and the abrasive, breaking-chip behaviour of cast iron (ISO group K). The coated carbide construction ensures reduced flank wear over repetitive cycles, translating into longer tool life and fewer indexings compared with uncoated solutions. The rhombic 80° form together with the negative relief 0° supports secure clamping and repeatable positioning in standard milling cutters, which benefits batch production where consistent part quality is essential. Explanations of terms: coated carbide describes a hardmetal body with a thin, engineered surface layer that improves thermal resistance and reduces abrasive wear during milling. Consistent surface finish and chip control for stable processes The plate’s corner radius 0.8 mm and the A27T chipbreaker geometry are selected to deliver stable chip formation and improved surface integrity, particularly in medium-depth finishing passes. A controlled chip shape reduces the risk of recutting and protects the tool edge from sudden load peaks, which is important for maintaining cycle times and reducing scrap rates. The WKP35S grade, as part of the Tiger·tec Silver series, is formulated to offer good resistance against flank and crater wear while preserving edge toughness — a combination that supports both long tool life and repeatable dimensional results in serial production environments. Practical handling and integration into existing tool systems The insert designation CNMQ120608T-A27T makes the mounting and replacement process straightforward in compatible indexable cutter bodies. The standardised rhombus form and the M tolerance class enable predictable seating and minimal rework during changeovers. For workshops aiming to increase uptime, the reliable chip control and the stable cutting edge reduce the frequency of tool changes and the need for extensive rework, thereby lowering total machining cost per part. For application selection, the grade is catalogued against ISO groups P and K, which guides tool path planning and feeds/speeds adjustments in CAM systems. Contact Metav Werkzeuge for detailed application guidance and to secure Walter Tools Tiger·tec Silver inserts; technical advice is available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data SKU: CNMQ120608T-A27T-WKP35S-WALTER Label: Fräswendeschneidplatte CNMQ120608T-A27T WKP35S Walter Tools ISO designation: CNMQ120608T-A27T WKP35S Manufacturer: Walter Tools Facts / Numerical data Corner radius: 0.8 mm Plate size: 12 Plate thickness: 06 Relief angle: 0° (negative) Plate form: Rhombus 80° Tolerance class: M Special features / Design & applicability Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: A27T Execution: Q Material suitability: P (steel) / K (cast iron) Coated hardmetal for improved wear resistance FAQ What materials is this insert suitable for? The CNMQ120608T-A27T WKP35S insert by Walter Tools is specified for ISO groups P and K, making it suitable for steel and cast iron machining. How does the Tiger·tec Silver series benefit milling processes? The Tiger·tec Silver coating on the WKP35S grade improves thermal stability and wear resistance, which helps the insert maintain edge integrity and deliver consistent finish over extended runs. What is the significance of the 0° negative relief? A 0° negative relief offers secure clamping and stable seating in compatible cutter bodies, which supports repeatable positioning and reduced vibration during milling. Is the A27T chipbreaker suitable for finishing passes? Yes, the A27T chipbreaker combined with a 0.8 mm corner radius provides controlled chip formation and surface quality appropriate for medium finishing applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer (Walter Tools).
CNMQ120608T-A27T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and a dedicated A27T chipbreaker for consistent chip control and extended tool life; order the insert through Metav Werkzeuge or request tailored application advice from our consultants. CNMQ120608T-A27T WPP35G indexable milling insert — Tiger·tec Gold for steel by Walter Tools The CNMQ120608T-A27T WPP35G is an indexable milling insert designed for productive steel machining, offering a rhombic 80° geometry and a negative 0° clearance for stable cutting engagement. Tiger·tec Gold coating for improved wear resistance Optimised chipbreaker A27T for reliable chip control Rhombic 80° shape for versatile milling strategies Negative 0° clearance for precise depth control Increased process efficiency through coating and chip control The Tiger·tec Gold series combines a coated carbide grade with an engineered geometry to deliver predictable tool life and reduced downtime. The WPP35G grade is optimised for ISO group P (steel) and balances wear resistance with toughness, which helps to maintain cutting edge integrity under typical steel cutting temperatures. The integrated A27T chipbreaker is configured to produce controllable chip shapes across a range of feeds and depths, reducing rework and improving operator safety. As a consequence, machining cycles become more reliable and overall production yields rise. Reliable geometry for versatile milling strategies A rhombic 80° insert provides flexibility for face and shoulder milling, enabling higher engagement angles where required. The 0.8 mm corner radius increases edge strength for interrupted cuts and contributes to surface finish stability without sacrificing feed responsiveness. The negative 0° clearance ensures a secure cutting position in the pocket and reduces vibration in heavy or variable material sections. These geometric characteristics translate into fewer insert changes and more consistent component quality in batch or single‑piece flow. Practical benefits in workshop integration and selection The insert is supplied in the CNMQ format, making it compatible with standard indexable milling systems that accept this geometry. The coated design and the WPP35G grade mean the insert is particularly effective where a balance of wear resistance and toughness is required for varied steel alloys. For planners and process engineers, this combination supports longer tool life and predictable replacement intervals, simplifying inventory management. The clear designation and ISO orientation help in selecting the correct grade for production needs, reducing setup time and improving first‑time machining accuracy. For tailored recommendations on implementing Walter Tools Tiger·tec Gold inserts in production, contact Metav Werkzeuge for application support and procurement by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data Article number: CNMQ120608T-A27T-WPP35G-WALTER Label: Fräswendeschneidplatte CNMQ120608T-A27T WPP35G Walter Tools Series / Grade: Tiger-tec Gold / WPP35G Facts Insert size: 12 Thickness: 06 Corner radius: 0,8 Clearance: 0° (negativ) Shape: Rhombus 80° Tolerance class: M Special features Chipbreaker: A27T Material application: Steel (ISO P) Designation: CNMQ120608T-A27T Series notes: Coated carbide, Tiger·tec Gold technology Manufacturer: Walter Tools FAQ What materials is this insert designed for? The CNMQ120608T-A27T WPP35G insert from Walter Tools is formulated for machining steel (ISO P), offering a balance of toughness and wear resistance for a wide range of steel alloys. How does the A27T chipbreaker affect performance? The A27T chipbreaker on the CNMQ120608T-A27T WPP35G promotes consistent chip control, reducing the risk of long, tangled chips and improving process stability in typical steel milling operations. What does the rhombic 80° shape enable? The rhombic 80° geometry provides versatility for face and shoulder milling and supports higher engagement angles while maintaining good surface quality with the CNMQ120608T-A27T WPP35G. Is the WPP35G grade suitable for interrupted cuts? Yes; the WPP35G grade, combined with a 0.8 mm corner radius, gives the insert enhanced edge strength suitable for interrupted cuts in many steel applications. What benefits does the Tiger·tec Gold coating bring? Tiger·tec Gold coating on the CNMQ120608T-A27T WPP35G improves wear resistance and thermal stability, contributing to longer tool life and reduced frequency of indexable insert changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names remain the property of their respective owners. Walter Tools and associated names are mentioned for identification and explanation only. The offered item is an original, brand‑new product from the manufacturer.
CNMQ160812-A57T WKP35S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and the WKP35S grade for durable, consistent machining of steel and cast iron; the rhombic 80° geometry and 1.2 mm corner radius support stable cutting and improved surface quality. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CNMQ160812-A57T WKP35S milling indexable insert by Walter Tools — Tiger·tec Silver coated, rhombic 80° The CNMQ160812-A57T WKP35S is a rhombic 80° milling indexable insert engineered for robust machining of steel and cast iron in productive milling routines. Tiger·tec Silver coating for extended tool life Designed for steel (P) and cast iron (K) Rhombic 80° geometry for versatile milling Durable coated grade for reliable productivity The Tiger·tec Silver coating combined with the WKP35S carbide grade provides a balance of wear resistance and reliable cutting-edge stability. Designed for the typical thermal and chip formation conditions when machining steel and cast iron, this coated cemented carbide grade helps maintain cutting performance under continuous loads. The result is less frequent index changes and a reduced risk of unexpected edge failure, which supports smoother production sequences and predictable tool life. Geometry that improves stability and surface finish The rhombic 80° insert form with a 1.2 mm corner radius and a 0° (negative) free angle offers mechanical robustness at the cutting edge. This geometry promotes stable cutting forces and consistent contact conditions, which contributes to an improved surface finish and dimensional stability on workpieces. For applications where edge strength and repeatable results matter, the insert geometry reduces the tendency for edge chipping and supports a controlled chip flow under varying cutting parameters. Proven process security and application relevance Belonging to the Tiger·tec Silver series and specified in tolerance class M, the insert is intended for productive milling tasks that demand consistent results. The A57T chipbreaker and the WKP35S grade are tuned to handle the abrasive behaviour of cast irons and the heat-affected chips typical of steels, enabling stable chip formation and manageable machining conditions. This contributes directly to process reliability, lower scrap rates and predictable maintenance intervals for high-throughput operations. Practical advantages on the shop floor The insert’s combination of a modern coating system and a robust geometry reduces downtime associated with tool changes and rework. As a result, machining operations can benefit from higher productivity and an improved cost-per-part metric. If uncertainty remains about suitability for a specific machine setup or operation, our technical advisors are available to discuss cutting data and application-specific recommendations. For recommendations tailored to Walter Tools’ Tiger·tec Silver range and assistance with selection or ordering, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our consultants will advise on the best insert configuration for the application. Technical data Article number: CNMQ160812-A57T-WKP35S-WALTER Label: Fräswendeschneidplatte CNMQ160812-A57T WKP35S Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Facts Plate size: 16 Corner radius: 1.2 mm Free angle: 0° (negative) Plate thickness: 08 Tolerance class: M Plate form: Rhombus 80° Special features Coating: Tiger·tec Silver Grade: WKP35S Chipbreaker: A57T Series: Tiger·tec Silver Material suitability: steel (P) and cast iron (K) Execution: Q FAQ What materials is the insert suitable for? The CNMQ160812-A57T WKP35S insert is suitable for machining steel (P) and cast iron (K), with the WKP35S grade optimised for these workpiece groups. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating offers enhanced wear resistance and edge stability, helping the insert to deliver consistent cutting performance and longer indexable life under the thermal loads common when machining steel and cast iron. How does the rhombic 80° form affect application versatility? The rhombic 80° geometry provides a robust cutting edge and adaptable cutting angles, making the insert useful in a range of milling operations where a combination of strength and good surface quality is required. Why is the 1.2 mm corner radius important for results? A 1.2 mm corner radius increases edge strength and reduces the risk of chipping, supporting reliable surface finishes and dimensional stability during heavier cutting or interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand‑new goods from the manufacturer.
CNMQ160812-A57T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WPP35G grade for consistent tool life and reliable chip control when machining steel; the robust rhombic geometry and A57T chipbreaker support stable, productive milling. Order directly via Metav Werkzeuge or consult our specialists for cutting data and stocking options. CNMQ160812-A57T WPP35G – indexable milling insert (Tiger·tec Gold) by Walter Tools The CNMQ160812-A57G WPP35G is an indexable milling insert optimised for productive steel machining, combining a coated carbide grade with a rhombic 80° geometry for secure engagement in industrial milling operations. Tiger·tec Gold coated carbide for tool life Engineered for ISO P steels Rhombic 80° geometry for secure engagement 0° negative relief for stable cutting Consistent cutting performance for steel machining The combination of the WPP35G grade and the Tiger·tec Gold coating provides a balanced solution for machining steel according to ISO P. The chemistry and multilayer coating enhance wear resistance and thermal stability, delivering consistent chip control and extended service intervals. This results in fewer index changes and more uptime on the shop floor, which in turn supports predictable cycle times and process reliability. Geometry and edge technology that stabilise the cut The rhombic 80° geometry and the 0° negative relief produce a secure cutting engagement that reduces vibration and supports heavy interrupted cuts. The defined corner radius 1.2 mm and the A57T chipbreaker contribute to a controlled chip flow and reduced heat concentration at the cutting edge. These features help maintain dimensional accuracy and deliver a repeatable surface finish under varying cutting conditions. Application-focused grade for mixed operating conditions The insert’s specification reflects a graded performance approach: wear resistance where required, but with sufficient toughness to handle variable loads. The WPP35G grade is a coated carbide designed to address the thermal and mechanical demands of steel machining, offering a compromise between longevity and resistance to edge chipping. This makes the insert suitable for a range of milling tasks from semi-finishing to more aggressive roughing operations on unalloyed and alloyed steels. Practical integration and handling benefits Marked by the CNMQ designation, the insert fits conventional indexable milling systems and is easy to seat and index in standard toolholders. With a nominal plate size of 16 mm, a thickness of 0.8 mm and a corner radius of 1.2 mm, the geometry is straightforward to include in tooling lists and CAM setups. The combination of reliable seating, a proven chipbreaker and the Tiger·tec surface treatment simplifies tooling management and supports a predictable maintenance cadence. Contact Metav Werkzeuge for tailored cutting parameters, availability and technical advice on Walter Tools CNMQ160812-A57T WPP35G inserts Technical data SKU: CNMQ160812-A57T-WPP35G-WALTER Article designation: CNMQ160812-A57T WPP35G Label: Fräswendeschneidplatte CNMQ160812-A57T WPP35G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP35G Execution: Q Numbers / Core technical data Size: 16 mm Thickness: 0.8 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Plate form: Rhombus 80° Special features Coating / grade: WPP35G (Tiger·tec Gold coating) Chipbreaker: A57T Material suitability: Steel (ISO P) Insert material: Coated carbide Designation without sort: CNMQ160812-A57T FAQ What materials is this insert intended for? The CNMQ160812-A57T WPP35G insert is specified for machining steel (ISO P) and is engineered to handle the typical thermal and chip-formation behaviour of such materials. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on the WPP35G grade improves wear resistance and thermal stability, which prolongs cutting-edge life and supports stable machining performance. Which chipbreaker does this insert use and what does it deliver? This insert uses the A57T chipbreaker, designed to promote controlled chip formation and evacuation, reducing heat build-up at the edge and improving process security. Is the geometry suitable for interrupted cuts? Yes, the rhombic 80° geometry combined with a 0° negative relief and a 1.2 mm corner radius provides stable engagement and resistance to edge damage during interrupted milling. Can this insert be used across different milling operations? The balanced properties of the WPP35G grade make the insert versatile for a range of milling tasks on steel, from semi-finishing to more aggressive material removal, depending on tooling and cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (market appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
CNMQ160812T-A27T WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust Rhombic 80° geometry and the A27T chipbreaker for consistent, productive machining of steel and cast iron; order the insert directly via Metav Werkzeuge or contact our consultants for application support. CNMQ160812T-A27T WKP35S milling indexable insert by Walter Tools — Rhombic 80°, Tiger·tec Silver coating CNMQ160812T-A27T WKP35S is a high-performance milling insert designed for versatile metalcutting tasks in steel and cast iron, combining a negative rake face and dedicated chip control for stable, productive machining Tiger·tec Silver coating for long tool life Suitable for steel (P) and cast iron (K) Rhombic 80° geometry for flexibility A27T chipbreaker for reliable chip control Longer tool life through advanced coating technology The Tiger·tec Silver coating and the WKP35S grade deliver a balanced performance between wear resistance and toughness. This coating technology reduces abrasive and thermal wear, which translates into longer tool life and fewer changeovers on the shop floor. For operations where consistency counts, the coated carbide composition ensures reproducible results under varying cutting conditions, supporting sustained productivity and lower tool costs per component. Robust geometry and negative rake for heavy-duty cuts The Rhombic 80° shape with a 0° negative rake offers a stable cutting edge that resists deformation during heavy cuts and interrupted machining. The geometry provides good support for the cutting edge, enabling higher radial engagement when required. The combination of the insert form and its corner radius 1.2 mm helps to maintain surface integrity while reducing the risk of chipping, making it suitable for both roughing and medium finishing operations. Controlled chip formation and material suitability Equipped with the A27T chipbreaker, this insert produces predictable chip shapes across a range of feeds and depths, improving evacuation and reducing recutting. The specification P / K indicates that the grade is optimised for both steel (P) and cast iron (K) according to ISO material groups, so users can rely on the insert for shop-floor versatility. The coated carbide substrate of the WKP35S grade balances wear resistance and edge stability for these material families. Practical guidance for effective application The insert’s designation and form factor allow straightforward integration into common milling tool holders configured for 16 mm inscribed circle dimensions and an 08 thickness profile. When paired with appropriate cutting data and clamping rigidity, the insert yields consistent surface finish and predictable tool life. For parameter selection, start with manufacturer-recommended speeds for the workpiece class and tune feeds to achieve the intended chip thickness while monitoring temperature and wear patterns. For application recommendations or to specify the CNMQ160812T-A27T WKP35S from Walter Tools, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss toolholders, cutting data and availability Technical data SKU: CNMQ160812T-A27T-WKP35S-WALTER Designation: CNMQ160812T-A27T WKP35S Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Facts Insert size: 16 Thickness: 08 Corner radius: 1.2 mm Negative rake: 0° Geometry: Rhombic 80° Tolerance class: M Special features Chipbreaker: A27T Material applicability: Steel (P) and Cast iron (K) Coating technology: Tiger·tec Silver Grade material: Coated carbide Execution: Q FAQ What materials is this insert intended for? The CNMQ160812T-A27T WKP35S is optimised for steel (P) and cast iron (K), reflecting the grade and Tiger·tec Silver coating characteristics. What advantage does the Rhombic 80° geometry provide? Rhombic 80° geometry gives flexibility in approach angles and robust edge support, which improves stability during higher radial engagements and interrupted cuts. How does the A27T chipbreaker affect machining? The A27T chipbreaker promotes controlled chip formation and reliable evacuation, reducing recutting and making process parameters easier to stabilise. Is the insert suitable for roughing and finishing? Yes, with its corner radius 1.2 mm and negative-rake design the insert is suited to roughing and medium finishing when set up with appropriate feeds and speeds. Which coating and grade should be chosen for prolonged performance? The Tiger·tec Silver coating combined with the WKP35S grade provides an established balance of wear resistance and toughness for extended tool life in steel and cast iron applications. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand-new goods of the manufacturer.
CNMQ160812T-A27T WPP35G Wendeplatten - Walter Tools
Combine wear resistance from the Tiger·tec Gold grade with the 1.2 mm corner radius and negative relief to achieve stable, productive steel machining; order the inserts via Metav Werkzeuge or consult the team for process optimisation. CNMQ160812T-A27T WPP35G milling insert — Tiger·tec Gold, 1.2 mm corner radius (Walter Tools) The CNMQ160812T-A27T WPP35G is a precision indexable milling insert engineered for high-productivity steel machining with a Tiger·tec Gold coated carbide grade and a negative 0° relief. Tiger·tec Gold coating for long tool life WPP35G grade optimised for steel machining Rhombic 80° shape for versatile milling applications 1.2 mm corner radius for stable cutting edges Proven coating and grade for extended productivity The Tiger·tec Gold technology paired with the WPP35G grade delivers consistently stable chip formation and extended tool life, especially in steel applications classified under ISO P. The coated carbide composition provides improved resistance to abrasive wear and temperature-induced degradation, which translates into fewer index changes and longer uninterrupted machining cycles. For operations that prioritise throughput and repeatability, this coating-grade combination supports higher cutting parameters while maintaining acceptable flank and crater wear rates. Geometry that enhances process stability and surface quality The Rhombus 80° insert geometry and 1.2 mm corner radius create a robust cutting edge that reduces vibration and improves surface finish during shoulder and slot milling. The negative 0° relief produces a stable rake for interrupted cuts and tough material transitions, enabling secure engagement and predictable chip breakage with the A27T chipbreaker. These geometric characteristics reduce the risk of premature edge chipping, offering measurable gains in component quality and fewer rework cycles on steel parts. Application focus and practical benefits for workshops Designed primarily for steel machining, the insert’s specifications—such as the coated carbide grade and chipbreaker design—make it suitable for a range of general-purpose and demanding finishing operations. The combination of grade and geometry enables a balance of toughness and wear resistance: tougher zones absorb shock during roughing while harder coating layers preserve the cutting edge during high-speed passes. For production environments seeking lower tooling costs per part and consistent part quality, this insert supports process reliability and predictable tool-change planning. Contact Metav Werkzeuge for application advice and to secure Tiger·tec Gold WPP35G inserts for reliable, high-productivity steel milling. Technical Data Article number: CNMQ160812T-A27T-WPP35G-WALTER Description: Fräswendeschneidplatte CNMQ160812T-A27T WPP35G Walter Tools Manufacturer: Walter Tools Facts Corner radius: 1.2 mm Insert size: 16 Thickness code: 08 Relief angle: 0° (negative) Tolerance class: M Special features Grade: WPP35G Series: Tiger·tec Gold Shape: Rhombus 80° Chipbreaker: A27T Application: Steel (ISO P) Execution: Q FAQ What materials is this insert intended for? The CNMQ160812T-A27T WPP35G insert is specified for steel machining (ISO P); the WPP35G grade and Tiger·tec Gold coating are optimised for the heat and chip characteristics typical of steel cutting. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WPP35G grade improves wear resistance and thermal stability, resulting in longer tool life and more consistent performance across batch runs when using the CNMQ160812T-A27T insert. Which machining tasks suit the Rhombus 80° geometry? The rhombic 80° shape is versatile for shoulder milling, slotting and general face operations; combined with the 1.2 mm corner radius and A27T chipbreaker it provides stable cutting and good surface quality on steel components. Is the insert suitable for interrupted cuts and tougher operations? Yes. The negative 0° relief and the robust corner geometry of this insert are designed to withstand interrupted cuts and varying engagement, supporting secure tool performance under demanding conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanation. There is no affiliation between Metav Werkzeuge and the referenced brands. The offered item is an original, factory-new product of the respective manufacturer.
CNMU080508-D57T WKP25S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Silver coating, the WKP25S grade and a robust rhombic 80° geometry for productive, wear‑resistant milling of steels and cast irons; order this insert via Metav Werkzeuge or consult their specialists for application support. CNMU080508-D57T WKP25S milling indexable insert, Tiger‑tec Silver – Walter Tools The CNMU080508-D57T WKP25S is a rhombic 80° milling indexable insert engineered for reliable machining of steel and cast iron in general milling operations. Tiger‑tec Silver coating for extended tool life Grade WKP25S optimised for steel and cast iron Rhombic 80° shape for versatile milling applications 0.8 mm corner radius with 0° negative rake Achieve higher productivity with advanced coating technology The combination of the Tiger‑tec Silver surface treatment and the WKP25S carbide grade delivers improved wear resistance and consistent cutting performance under typical milling loads. The coating is designed to reduce abrasive wear and thermal damage during high material removal rates, which translates into longer in‑service intervals and fewer tool changes. For operations focused on throughput, this insert supports steady cutting conditions and contributes to overall shopfloor efficiency. Geometry engineered for stability and chip control A rhombic 80° shape gives the insert versatility for both side and face milling, while the 0° negative rake increases edge strength for interrupted cuts and heavy engagement conditions. The built‑in D57T chipbreaker promotes effective chip control, reducing the risk of entangling or long chips and improving surface finish. The 0.8 mm corner radius balances edge robustness with achievable surface quality, making the geometry suitable for general‑purpose milling where both life and workpiece integrity matter. Clear material scope: Steel and cast iron (ISO P / K) The insert is specified for ISO material groups P (Steel) and K (Cast iron), meaning the grade is tailored to handle the heat and continuous chips typical when machining steels, as well as the abrasive behaviour and brittle chips encountered with cast irons. This makes the insert a practical choice for mixed production runs or job shops processing both unalloyed and alloyed steels plus cast components, without the need for frequent tool grade changes. Shopfloor reliability and dimensional consistency With tolerance class M, the insert meets medium tolerance requirements for secure seating and repeatable performance in standard toolholders. The coded dimensions (plate size 08, thickness code 05) and proven chipformer design support stable cutting over a range of feeds and speeds, contributing to predictable tool life and process stability. For specific cutting data or to confirm compatibility with a given holder, refer to the toolholder manufacturer’s guidelines or contact Metav Werkzeuge for tailored advice. Contact Metav Werkzeuge for application advice or to secure genuine Walter Tools CNMU080508‑D57T WKP25S inserts with Tiger‑tec Silver coating; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CNMU080508-D57T-WKP25S-WALTER Name: CNMU080508-D57T WKP25S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP25S Product type: milling indexable insert Execution: U SKU: CNMU080508-D57T-WKP25S-WALTER Numbers / Core technical data Corner radius: 0.8 mm Free rake: 0° (negative) Plate size: 08 Thickness code: 05 Tolerance class: M Designs / Special features Plate form: Rhombus 80° Chipbreaker: D57T Material designation: P / K (Steel / Cast iron) Base designation: CNMU080508-D57T Series name: Tiger‑tec Silver FAQ What materials is this insert suitable for? The CNMU080508‑D57T WKP25S insert is specified for ISO groups P and K, making it suitable for machining steel and cast iron applications. How does the D57T chipbreaker affect machining? The D57T chipbreaker on this indexable insert improves chip formation and evacuation, which helps to maintain stable cutting and a better surface finish in both continuous and interrupted milling. Is the negative rake suitable for heavy milling? Yes. The 0° negative rake increases edge strength and is beneficial for heavier milling cuts or interrupted cutting, offering greater resistance to chipping. What does tolerance class M mean for fit and repeatability? Tolerance class M indicates medium dimensional tolerance, ensuring predictable seating in standard toolholders and consistent repeatability across indexable inserts. Can the CNMU080508‑D57T WKP25S be used for mixed production runs? Yes. The WKP25S grade and Tiger‑tec Silver series are designed to handle a range of steels and cast irons, making this insert practical for mixed production without frequent grade changes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG brand (market appearance: Walter Tools) is part of the global group and stands for precision toolmaking and engineering excellence. Protected trademarks and trade names belong to their respective owners and are mentioned for clarification only. There is no affiliation between our company and the trademark owners; the offered item is an original, factory‑new product of the manufacturer.
CNMU080508-D57T WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Silver coating and the WKP35S carbide grade for durable, productive machining of steel and cast iron; the rhombic 80° geometry with a 0.8 mm corner radius ensures repeatable edge life and stable chip control. Order directly via Metav Werkzeuge or consult our specialists for application advice. CNMU080508-D57T WKP35S – Milling insert for steel and cast iron | Walter Tools (Tiger·tec Silver) The CNMU080508-D57T WKP35S is a rhombic 80° milling insert engineered for productive face and peripheral milling of steel and cast iron, featuring a Tiger·tec Silver coated carbide grade for enhanced wear resistance. Tiger·tec Silver coating for stable cutting WKP35S grade for steel and cast iron machining Rhombic 80° form with 0.8 mm corner radius Negative 0° rake for heavy-duty performance Consistent performance on steel and cast iron The combination of the WKP35S coating grade and the Tiger·tec Silver technology delivers predictable wear behaviour when machining group P (steel) and group K (cast iron) materials. Designed for the thermal and mechanical conditions typical of steel cutting, the grade offers optimised chip formation and abrasion resistance, reducing unplanned tool changes and helping to maintain steady cycle times in medium- to high-volume production environments. Geometry that stabilises cutting and extends life The rhombic 80° form, paired with a 0.8 mm corner radius and a negative 0° rake, provides a robust cutting edge that resists chipping under interrupted cuts and heavy engagement. This geometry supports consistent surface quality and repeatable insert indexing, while the defined corner radius helps to distribute cutting forces, lowering edge stress and improving component finish in both face and shoulder milling operations. Productivity and process security advantages A Tiger·tec Silver coated carbide insert such as this promotes longer intervals between regrinds and simplifies process planning. The chipbreaker D57T assists in controlled chip detachment for the typical chip types encountered in steel and cast iron, reducing the risk of built-up edge and contributing to a stable machining process. Together, these features support higher material removal rates and fewer process interruptions, which translates into improved overall productivity on the shop floor. Application guidance and compatibility This insert is produced in the CNMU08 form factor and is compatible with milling cutters designed for indexable inserts of that designation. The WKP35S grade is catalogued for steel and cast iron; final feed and speed recommendations depend on the specific workpiece grade and machine capability. Where application conditions are unusual or material specifications are critical, Metav Werkzeuge’s technical team can provide tailored recommendations to match cutter bodies, clamping systems and process parameters. For a reliable upgrade to milling performance with Tiger·tec Silver and the WKP35S grade, contact Metav Werkzeuge for ordering and application consulting at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: CNMU080508-D57T-WKP35S-WALTER Name: CNMU080508-D57T WKP35S Product type: Milling insert Manufacturer: Walter Tools Grade: WKP35S Series: Tiger·tec Silver Facts Form: Rhombus 80° Corner radius: 0.8 mm Plate size code: 08 Plate thickness code: 05 Clearance angle: 0° (negative) Tolerance class: M Chipbreaker: D57T Materials and special features Suitable for steel (P) Suitable for cast iron (K) Coating/Technology: Tiger·tec Silver Execution: U Plate form: Rhombus 80° Stable chip formation and productive machining FAQ What materials is this insert suitable for? The CNMU080508-D57T WKP35S is designed for machining steel (ISO group P) and cast iron (ISO group K) using the Tiger·tec Silver coated carbide grade. What is the purpose of the rhombic 80° form? A rhombic 80° form gives versatile cutting geometry for both face and peripheral milling, offering a compromise between accessibility and cutting-edge strength for repeatable results. How does the WKP35S grade affect machining? WKP35S, as a Tiger·tec Silver coated grade, provides improved wear resistance and reliable edge behaviour, especially under the heat and abrasion conditions typical when machining steel and cast iron. Which chipbreaker is used and why does it matter? The insert features the D57T chipbreaker, which is tuned to promote controlled chip detachment for the chip forms common in steel and cast iron, contributing to process stability and surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com