CNMU080508-D57T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of a robust combination of Tiger·tec Gold coating and the WPP35G carbide grade for dependable tool life and consistent chip formation in steel machining; order directly via Metav Werkzeuge or consult their team for application-specific cutting data. CNMU080508-D57T WPP35G — Fräswendeschneidplatte for steel machining (Walter Tools) CNMU080508-D57T WPP35G is a rhombic indexable milling insert designed for medium to high-performance steel machining, offering a coated-carbide grade tuned for wear resistance and broad process stability Tiger·tec Gold coated carbide for extended life Optimised D57T chipbreaker for steel machining Rhombic 80° geometry with 0.8 mm nose radius Negative 0° rake for stable cutting forces Extended productivity from Tiger·tec Gold coating The insert combines the Tiger·tec Gold coating with the WPP35G grade to deliver improved abrasion resistance and thermal stability during steel cutting. This coated carbide formulation is engineered to handle the typical heat and chip formation encountered when machining unalloyed and alloyed steel, reducing flank wear and extending the life of the cutting edge. For production environments, the result is fewer tool changes and a more predictable replacement interval, which directly supports higher machine uptime and lower overall tooling cost per component. Geometry engineered for reliable chip control and process stability The D57T chipbreaker and the rhombic 80° geometry offer consistent chip formation under varying cutting conditions. A negative 0° rake increases edge strength and stabilises cutting forces in interrupted or heavy cuts, while the 0.8 mm nose radius helps maintain surface finish without sacrificing robustness. These geometric choices improve dimensional repeatability and make the insert particularly suited to profiling and shoulder milling in steels where chip control and edge security are priorities. Practical advantages for workshop efficiency and quality control As an indexable insert, the CNMU080508-D57T WPP35G simplifies tool management: multiple cutting edges per insert reduce procurement and handling complexity, and the insert format supports rapid re-indexing to restore cutting performance. The combination of grade and geometry promotes a reliable surface finish and steady tool life, easing process planning and inventory forecasting. For additional cutting parameters or material-specific recommendations, Metav Werkzeuge provides application support and detailed cutting data by e‑mail or telephone. Contact Metav Werkzeuge for tailored cutting data, availability and application advice on Walter Tools Tiger·tec Gold inserts Technical Data Article number: CNMU080508-D57T-WPP35G-WALTER Label: Fräswendeschneidplatte CNMU080508-D57T WPP35G Walter Tools Series: Tiger-tec Gold Core specifications Geometry: Rhombus 80° Corner radius: 0.8 mm Size: 08 Thickness: 05 Relief angle: 0° (negative) Chipbreaker: D57T Tolerance class: M Material and special features Grade: WPP35G Coating: Tiger·tec Gold Base material group: P (steel) Execution: U Manufacturer: Walter Tools FAQ What applications is this insert best suited for? The CNMU080508-D57T WPP35G fräswendeschneidplatte is optimised for machining steel (ISO P), making it suitable for shoulder milling, profiling and general milling operations where wear resistance and chip control are required. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WPP35G grade improves thermal stability and abrasion resistance, resulting in longer cutting edge life and more consistent performance in steel machining. What does the 0° (negative) relief angle mean in practice? A negative 0° rake increases edge strength and reduces the tendency for chipping under heavy or interrupted cuts, enhancing stability and reliability in tougher milling conditions. Can the insert provide a good surface finish with a 0.8 mm nose radius? Yes, the 0.8 mm nose radius balances edge strength and surface quality, enabling acceptable finish levels while maintaining robust cutting performance. Who to contact for cutting data and ordering? For detailed cutting parameters or to place an order, Metav Werkzeuge can be contacted for application support and product availability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, brand-new production from Walter Tools.
CNMU080508-D57T WSM35G WSM35G Wendeplatten - Walter Tools
Die Kombination aus der Tiger·tec Gold‑Beschichtung, der WSM35G‑Sorte und dem präzisen D57T‑Spanformer liefert dauerhaft stabile Schneidkanten und zuverlässige Spanbildung bei rostfreien Stählen und hitzebeständigen Legierungen; direkt bestellbar oder gerne mit fachlicher Beratung über Metav Werkzeuge. CNMU080508-D57T WSM35G – Milling indexable insert (Tiger·tec Gold), Walter Tools The CNMU080508-D57T WSM35G is a rhombic 80° milling indexable insert designed for demanding machining of stainless steels and superalloys, featuring a 0° negative rake and a D57T chipbreaker for controlled chips. Tiger·tec Gold coating for high wear resistance D57T chipbreaker for stable chip control Suited to stainless steels and superalloys Durable edge life for demanding materials Die Kombination aus Tiger·tec Gold‑Beschichtung und der WSM35G‑Hartmetallsorte sorgt für eine längere Werkzeugstandzeit bei zähharten Werkstoffen. Die Sorte ist als coated carbide ausgeführt und wurde speziell für schlechte Wärmeableitung und stark belastete Schneidkanten ausgelegt; daraus ergibt sich weniger Werkzeugwechsel und eine höhere Maschinenauslastung. Für Anwender bedeutet das: konstantere Prozesse, geringerer Ausschuss und planbare Kosten im Fertigungsablauf. Predictable chip control and secure cutting Die Geometrie mit Rhombus 80°‑Form, dem D57T‑Spanformer und dem 0° negative rake optimiert die Spanbrechung und reduziert Wärmeeintrag in die Schnittzone. Durch die 0.8 mm corner radius wird die Schneidkante unterstützt, was insbesondere beim Schlichten und bei unterbrochenen Schnitten die Standzeit verbessert. Bei serieller Fertigung führt dieses Verhalten zu stabileren Oberflächen und weniger Nacharbeit. Process fit and workshop applications Die Wendeschneidplatte ist für Anwendungen nach ISO 513 (M/S) klassifiziert und deckt damit rostfreie Stähle sowie hitzebeständige Superlegierungen/Titan ab. Die tolerance class M und die Standard‑Plattengrößen vereinfachen die Auswahl kompatibler Werkzeughalter. Diese Eigenschaften machen das Teil interessant für Lohnfertiger, Schiffbau, Energie‑ und Luftfahrtbetriebe, in denen Wiederholgenauigkeit und Prozesssicherheit gefragt sind. Für Beratung zur Anwendung der Walter Tools Tiger·tec Gold‑Wendeschneidplatte sowie zur Bestückung geeigneter Halter, kontaktieren Sie Metav Werkzeuge – info@metav-werkzeuge.com oder +49 2822 7131930. Technical Data SKU: CNMU080508-D57T-WSM35G-WALTER Label: Fräswendeschneidplatte CNMU080508-D57T WSM35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Chipbreaker: D57T Facts Corner radius: 0.8 mm Rake angle: 0° (negative) Insert form: Rhombus 80° Insert size: 08 Thickness designation: 05 Tolerance class: M Special features Coated carbide grade Tiger·tec Gold Optimised for stainless steels (M) and superalloys/titan (S) D57T chipbreaker for controlled chip flow Suitable for heavy‑duty and difficult‑to‑cut materials Rhombic 80° form for versatile milling strategies FAQ Which materials is this insert intended for? The CNMU080508-D57T WSM35G insert is designed for rostfreie Stähle and heat‑resistant superalloys (ISO 513 groups M and S) and performs best where thermal stability and edge robustness are required. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WSM35G grade increases wear resistance and heat protection, which extends tool life and maintains cutting‑edge stability under high thermal loads. How does the D57T chipbreaker affect machining? The D57T chipbreaker produces short, controllable chips and reduces the risk of built‑up edge, resulting in more consistent surface quality and fewer interruptions during milling. Is this insert compatible with standard toolholders? The CNMU080508‑D57T form and size follow common insert standards (rhombic 80° / size 08), allowing use in typical milling holders that accept this ISO‑style geometry. What process improvements can be expected in production? With the WSM35G grade and Tiger·tec Gold coating, users can expect longer intervals between tool changes, improved process stability and reduced rework, particularly on stainless and heat‑resistant alloys. Walter Tools is part of the Walter Group; protected trademarks and brand names remain the property of their respective owners. This listing refers to original, factory‑new goods from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
CNMU080508-D57T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the WSP45G grade for reliable, long-lasting milling performance; the rhombic 80° geometry with a 0.8 mm corner radius and 0° negative relief ensures stable cutting and chip control. Order the CNMU080508-D57T-WSP45G directly via Metav Werkzeuge or consult our specialists for application advice. CNMU080508-D57T WSP45G Indexable milling insert (Rhombic 80°, Tiger·tec Gold) — Walter Tools CNMU080508-D57T WSP45G is an indexable milling insert engineered for robust milling of Stahl, rostfreier Stahl and heat-resistant alloys, combining a Tiger·tec Gold coating with a versatile WSP45G grade for demanding production environments Tiger·tec Gold PVD coating WSP45G grade for versatile machining Rhombic 80° geometry for stability 0.8 mm corner radius for edge strength Consistent process performance through modern grade and coating The combination of the WSP45G grade and the Tiger·tec Gold technology delivers a balance between toughness and wear resistance that is tailored to milling applications. This PVD-coated carbide composition supports a stable cutting edge under fluctuating thermal loads, reducing the risk of premature flank wear. For production environments where cycle time and tool life influence cost-per-part, the material and coating pairing translates into measurable efficiency gains and fewer insert changes. Geometry that improves chip control and surface quality A rhombic 80° shape with 0° negative relief and a 0.8 mm corner radius gives this insert predictable cutting behaviour and reliable edge stability. The specific D57T chipbreaker is designed to form chips consistently in interrupted or continuous cuts, helping to avoid built-up edge and supporting steady surface finish. Explaining chipbreaker function: it organises the chip flow to prevent long, entangling turns and to reduce heat concentration at the cutting zone, which in turn benefits tool life and component quality. Broad material versatility for mixed production runs Designed for groups P / M / S, the insert is suitable for machining unalloyed and alloyed Stahl, rostfreier Stahl and high-temperature superalloys or titanium-based materials. The WSP45G composition addresses the different demands of these groups — from heat generation during stainless machining to abrasion and edge stability in superalloys. Selecting an insert with this range reduces tooling complexity on shop floors that handle diversified workpieces, simplifying inventory and set-up routines. Integration into workflows and handling recommendations The insert format CNMU080508-D57T fits standard indexable milling holders for rhombic 80° plates and is delivered in execution U with tolerance class M, enabling repeatable seating and reliable indexing. For best results, match cutting parameters to the workpiece group: moderate speeds and feeds for rostfreier Stahl and optimised coolant or dry strategies for superalloys as required. The insert’s geometry and chipformer support predictable regrinding intervals and consistent part quality, which eases process planning and reduces downtime. Practical benefits for production and procurement Using this insert variant reduces the number of insert types required across varied materials, supporting leaner tool kits and fewer changeovers. The design emphasis on a stable cutting edge and controlled chip formation helps lower scrap rates and improves first-pass yield. For purchasers, the clear designation and serial information simplify ordering and traceability in MRP systems; for operators, consistent chip behaviour streamlines handling and disposal during machining. For process-critical milling tasks choose the Walter Tools CNMU080508-D57T WSP45G with Tiger·tec Gold coating — contact Metav Werkzeuge for procurement or technical consultation via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number / SKU: CNMU080508-D57T-WSP45G-WALTER Designation: CNMU080508-D57T WSP45G Product type: Indexable milling insert Series: Tiger-tec Gold Manufacturer: Walter Tools Core technical data Shape: Rhombus 80° Corner radius: 0.8 mm Relief angle: 0° (negative) Plate size: 08 Plate thickness: 05 Tolerance class: M Materials & special features Grade / coating: WSP45G, Tiger·tec Gold (PVD-coated carbide) Material groups: P / M / S Chipbreaker: D57T Execution: U Applications: machining of Stahl, rostfreier Stahl and heat-resistant superalloys/titanium FAQ What materials is this insert suitable for? The CNMU080508-D57T WSP45G is specified for material groups P, M and S — that means it is suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys or titanium. How does the Tiger·tec Gold coating help in production? Tiger·tec Gold on the WSP45G grade increases wear resistance and thermal stability, improving tool life and maintaining cutting-edge integrity under cyclic thermal loads. What is the benefit of the rhombic 80° geometry? The rhombic 80° shape provides mechanical strength and stable engagement, which helps maintain consistent chip formation and surface finish in interrupted and continuous milling. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned exclusively for explanation; there is no commercial affiliation between our company and the named brands. The offered article is original, factory-new goods from the manufacturer Walter Tools.
CNMU120608-D57T WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S grade for consistent chip control and prolonged tool life; the rhombic 80° geometry with a 0.8 mm corner radius ensures stable finishing and tight tolerances. Order the insert directly via Metav Werkzeuge or ask the Metav consultants for application support. CNMU120608-D57S WKP25S milling insert by Walter Tools — Tiger‑tec Silver, D57T chipbreaker The CNMU120608-D57T WKP25S milling insert is a rhombic 80° indexable cutter designed for robust machining of steel and cast iron with a Tiger‑tec Silver coated carbide grade. Tiger‑tec Silver coating for long tool life Grade WKP25S for steel and cast iron Rhombic 80° shape with 0.8 mm corner radius High-performance grade and coating for reliable machining The combination of the WKP25S grade and the Tiger‑tec Silver coating provides a technical advantage in the machining of ISO P (steel) and ISO K (cast iron) workpieces. The insert’s coated carbide base and advanced coating technology reduce abrasive wear and improve edge stability under the high thermal loads typical when cutting steels, resulting in more consistent cycle times and fewer insert changes. This translates to measurable efficiency gains in series production and helps maintain part tolerances with less rework. Geometry tailored to precision and surface quality With a Rhombus 80° shape, 0.8 mm corner radius and 0° negative rake, the insert is engineered for shoulder milling and finishing operations where a controlled cutting engagement is required. The specified geometry supports a predictable cutting behaviour: steady chip formation, reduced vibration and improved surface finish. In practice, this means repeatable dimensional accuracy on profiles and shoulders, reducing downstream grinding or polishing requirements and supporting leaner machining processes. Chip control and process stability for productivity The dedicated D57T chipbreaker is optimised for fracturing and evacuating chips when machining steels and cast iron, promoting safer chip flow and preventing re-cutting. Stable chip control lowers the risk of edge damage and burr formation, thereby extending the effective lifetime of the insert and cutting tool assembly. By improving process stability, the insert contributes to reduced machine downtime and better overall equipment effectiveness (OEE) in both single‑pass and multi‑pass operations. Practical integration and application advice Designated by the ISO code CNMU120608-D57T WKP25S, the insert fits standard CNMU toolholders and is suitable for conventional milling set‑ups in job shops and production lines. Its tolerance class M and the standardised form factor facilitate simple stock management and rapid replacement during tool changes. For application notes, cutting data and feed‑per‑tooth guidance tailored to specific steel grades or cast iron types, Metav Werkzeuge can provide documented recommendations and cutting parameters to help integrate the insert into existing machining cycles. Discuss process integration of the Walter Tools Tiger‑tec Silver inserts with Metav Werkzeuge for tailored cutting data and application support Technical data SKU: CNMU120608-D57T-WKP25S-WALTER ISO designation: CNMU120608-D57T WKP25S Product type: milling indexable insert Series: Tiger‑tec Silver Grade: WKP25S Manufacturer: Walter Tools Facts Size designation: 12 Corner radius: 0.8 mm Relief angle: 0° (negative) Thickness designation: 06 Tolerance class: M Special features Chipbreaker: D57T Shape: Rhombus 80° Substrate: coated carbide Suitable for: steel (ISO P) Suitable for: cast iron (ISO K) Execution: U FAQ What materials is the CNMU120608-D57T WKP25S designed for? The CNMU120608-D57T WKP25S insert is specifically developed for machining steel (ISO P) and cast iron (ISO K), with a coated carbide grade optimised for these materials. Which coating and grade are used on this insert? This insert uses the Tiger‑tec Silver coating combined with the WKP25S grade, a coated carbide formulation intended to extend tool life and maintain edge stability during demanding operations. What cutting geometry does the insert offer and what is it best for? Featuring a Rhombus 80° form, 0.8 mm corner radius and a 0° negative rake, the insert suits shoulder milling and finishing where stable engagement and tight tolerances are required. How does the D57T chipbreaker affect machining performance? The D57T chipbreaker promotes controlled chip formation and evacuation in steel and cast iron machining, improving process stability and reducing the likelihood of edge damage. Is the CNMU120608-D57T WKP25S compatible with standard CNMU toolholders? Yes, the ISO designation CNMU120608 aligns with standard CNMU toolholder pockets, easing integration into existing tool assemblies and simplifying inventory management. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMU120608-D57T WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of a high-performance coated carbide grade that delivers consistent chip control and extended edge life; the combination of Tiger·tec Silver technology and the WKP35S grade supports productive machining of steel and cast iron. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. CNMU120608-D57T WKP35S indexable milling insert for steel and cast iron — Walter Tools, Tiger·tec Silver, 0° negative rake The CNMU120608-D57T WKP35S is an indexable milling insert engineered for productive face and shoulder milling of steels and cast irons, offering a robust geometry and a coated carbide grade for high process reliability Tiger·tec Silver coated grade WKP35S Optimised chip control with D57T chipbreaker Rhombic 80° geometry, 0.8 mm corner radius Designed for steel (P) and cast iron (K) Improved cutting performance through advanced coating The use of Tiger·tec Silver coating combined with a WKP35S substrate provides reliable wear resistance and thermal stability during continuous milling cycles. This coated carbide formulation is tailored to handle the heat and abrasion commonly encountered when machining steels and cast irons, meaning longer tool life and fewer insert changes. For production environments seeking to increase throughput, the coating supports higher cutting parameters without sacrificing edge integrity, resulting in more consistent component tolerances and reduced process interruptions. Geometry and chip control for stable machining The rhombic 80° geometry and 0.8 mm corner radius deliver a good balance between edge strength and cutting engagement, suitable for both shoulder and peripheral milling tasks. The 0° negative rake increases cutting edge robustness for interrupted cuts and tougher workpiece conditions, while the D57T chipbreaker is designed to promote short, controlled chips on both steel and cast iron. These characteristics reduce the risk of chip-related surface damage and improve machine uptime, so fewer interventions are needed during series production. Typical applications and practical handling notes Designed primarily for the ISO P and K workpiece groups, this insert is well suited to general milling operations where a combination of process security and cost efficiency is required. The insert’s tolerance class M and thickness code 06 ensure repeatable seating in standard cutter bodies; check holder compatibility for CNMU-style indexable geometry. When setting cutting data, prioritise stable feeds and moderate speeds adapted to the workpiece grade to exploit the grade’s abrasion resistance and maintain surface quality. For mixed-production environments, the insert’s adaptability to both steel and cast iron helps simplify tooling inventories. Contact Metav Werkzeuge today to discuss how the CNMU120608-D57T WKP35S can optimise production — Metav Werkzeuge provides technical advice and fast availability for tailored machining solutions Technical data SKU: CNMU120608-D57T-WKP35S-WALTER Designation: CNMU120608-D57T WKP35S Series: Tiger·tec Silver Grade: WKP35S Manufacturer: Walter Tools Facts Inscribed circle / nominal size: 12 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Thickness code: 06 Special features Coating: Tiger·tec Silver Substrate: coated carbide Chipbreaker: D57T Geometry: Rhombus 80° Material suitability: Steel (P), Cast iron (K) Application: general milling FAQ What materials is this insert suitable for? The CNMU120608-D57T WKP35S is designed for machining steel (P) and cast iron (K), exploiting the WKP35S grade’s abrasion resistance and thermal stability. How does the D57T chipbreaker affect machining? The D57T chipbreaker promotes short, controllable chips and improves chip evacuation on both steel and cast iron, reducing the likelihood of surface damage and downtime. Is the insert suitable for interrupted cuts? Yes; the 0° negative rake and a 0.8 mm corner radius increase edge robustness, making the insert well suited to interrupted and heavy engagement milling conditions. Which holder type is required for this insert geometry? This is a CNMU-style rhombic 80° indexable milling insert; ensure the cutter body accepts CNMU inserts and that seating tolerances match the tolerance class M. What benefits does Tiger·tec Silver offer in production? Tiger·tec Silver coating provides improved wear resistance and thermal stability, enabling higher cutting parameters and consistent edge life for production milling tasks. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMU120608-D57T WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and consistent performance for efficient steel machining; order the insert via Metav Werkzeuge or consult our specialists for process optimisation. CNMU120608-D57G WPP35G indexable milling insert – Tiger·tec Gold coating, for steel | Walter Tools The CNMU120608-D57G WPP35G is a rhombic 80° milling indexable insert designed for productive steel machining with a Tiger·tec Gold coated carbide grade. Tiger·tec Gold coated carbide Optimised D57T chipbreaker Rhombic 80° geometry Corner radius 0.8 mm, negative rake 0° Consistent cutting performance for steel components The Tiger·tec Gold coating and the WPP35G grade are configured specifically for machining steel, providing a balance of wear resistance and toughness. This combination allows stable cutting under the thermal and mechanical conditions typical for unalloyed and alloyed steels. The insert’s coated carbide substrate reduces flank wear and extends tool life, so fewer index changes are required and process interruptions are minimised. The design supports reproducible results across batch runs, improving overall production reliability. Stable chip formation and reduced machining risk A decisive advantage of this insert is the D57T chipbreaker, which is optimised to produce short, manageable chips when cutting steel. The rhombic 80° shape with a corner radius 0.8 mm and negative rake 0° promotes controlled cutting forces and consistent surface finish, especially in interrupted or varied-depth passes. Because chip form is stabilised, downstream issues such as tool jamming or workpiece damage are less likely, improving both operator safety and process security during milling operations. Practical application guidance for productive setups The insert is intended for conventional face and peripheral milling operations in steel applications. The indexable insert geometry and the Tiger·tec Gold technology are suitable for medium to high material removal rates while maintaining good edge life. For best results, pair the insert with rigid tooling and select cutting parameters that favour steady chip evacuation; coolant use and appropriate feed rates will further enhance wear resistance and surface integrity. The component’s tolerance class M ensures interchangeability and predictable seating in compatible toolholders. Discuss machining parameters and secure the right Walter Tools Tiger·tec Gold inserts with Metav Werkzeuge for optimised tool life and process stability — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to arrange technical consultation Technical data Article number: CNMU120608-D57T-WPP35G-WALTER Designation: CNMU120608-D57T WPP35G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Insert shape: Rhombus 80° Insert size: 12 (designation) Insert thickness: 06 Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Grade: WPP35G Chipbreaker: D57T Execution: U Material suitability: Steel (P) FAQ What materials is this insert suitable for? The CNMU120608-D57T WPP35G insert is designed for machining steel (ISO group P), matching the thermal and chip formation demands of unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold coating on this Walter Tools insert improves wear resistance and edge life, which leads to longer service intervals and more consistent component quality. What is the purpose of the D57T chipbreaker? The D57T chipbreaker is engineered to produce short, controlled chips during steel milling, reducing the risk of chip entanglement and improving process reliability. Is the insert suitable for interrupted cuts? Yes, the rhombic 80° geometry combined with a 0° negative rake and the 0.8 mm corner radius supports stable performance in interrupted milling. Can this insert be used in standard toolholders? The CNMU120608-D57T WPP35G follows common indexable insert conventions and can be used in compatible holders specified for rhombic 80° inserts and the given thickness and size. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMU120608-D57T WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold PVD coating, the tough WSP45G grade and the precise D57T chipbreaker for consistent edge life and stable chip control. Order the CNMU120608-D57T insert directly via Metav Werkzeuge or consult our technical advisers for process optimisation. CNMU120608-D57T WSP45G milling indexable insert, Tiger·tec Gold by Walter Tools — Rhombic 80°, D57T chipbreaker The CNMU120608-D57G WSP45G is a rhombic 80° milling insert engineered for versatile face and peripheral milling across a wide range of engineering alloys Tiger·tec Gold PVD-coated grade Suitable for Stahl, rostfreier Stahl and superalloys Rhombic 80° geometry with 0° negative rake 0.8 mm corner radius and D57T chipbreaker Increased process reliability through a tough PVD grade The Tiger·tec Gold series combines a PVD-coated surface with a specially developed substrate to deliver a balance of toughness and wear resistance. The WSP45G grade is optimised for milling operations where fluctuating cutting forces and moderate build-up of heat occur; this reduces unexpected edge failure and extends productive tool life. For production environments this translates into fewer insert changes and more consistent component quality, supporting efficient cycle times and lower tool consumption. Geometry and chip control that improve surface quality The rhombic 80° shape with a 0° negative rake and a 0.8 mm corner radius provides a stable cutting edge suited to both interrupted and continuous cuts. The D57T chipbreaker is designed to promote predictable chip formation and evacuation, which helps to avoid surface defects and reduces the risk of built-up edge. Explained simply: a stable edge geometry plus an optimised chip former lead to improved surface finish and repeatable dimensional results on each pass. Broad material capability for versatile milling strategies Designed for machining Stahl, rostfreier Stahl and heat-resistant alloys including titanium and superalloys, the insert’s combination of substrate and coating copes with high thermal loads and tough material behaviour. The grade supports safe chip formation where poor heat conduction or ductility would otherwise destabilise the process. For end users this means fewer process adjustments when switching between roughing and finishing operations and more predictable tool life across mixed production lots. For high-process reliability with the Tiger·tec Gold WSP45G grade, contact Metav Werkzeuge for ordering and tailored machining support via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: CNMU120608-D57T-WSP45G-WALTER Designation: CNMU120608-D57T Series: Tiger·tec Gold Grade: WSP45G Manufacturer: Walter Tools Core technical figures Plate size: 12 Plate thickness: 06 Corner radius: 0.8 mm Plate form: Rhombus 80° Rake angle: 0° (negative) Chipbreaker: D57T Tolerance class: M Materials & special features Applicable materials: Stahl (P), rostfreier Stahl (M), heat-resistant superalloys / titanium (S) Coating / substrate: PVD-coated cemented carbide (Tiger·tec Gold) Execution: U Series description: Tough, versatile PVD grade optimised for milling FAQ What materials can be machined with this insert? The CNMU120608-D57T WSP45G is suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys including titanium, thanks to the Tiger·tec Gold PVD system and its robust substrate. How does the D57T chipbreaker benefit milling operations? The D57T chipbreaker promotes predictable chip formation and efficient evacuation, which improves surface finish and reduces the incidence of built-up edge during milling with the WSP45G grade. What impact does the rhombic 80° geometry have on cutting performance? The rhombic 80° shape with a 0° negative rake stabilises the cutting edge under load and the 0.8 mm corner radius helps maintain dimensional accuracy and edge resilience in both roughing and finishing passes. Is the insert primarily for roughing or finishing? The insert’s balanced toughness and coating technology make it suitable for both roughing and finishing strategies; the WSP45G grade provides sustained edge life under varying cutting conditions. Which series and grade does this insert belong to? This insert is part of the Tiger·tec Gold series and is supplied in the WSP45G grade, designed as a coated carbide solution for demanding milling applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMU160812-D57T WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WKP25S grade and a robust 80° rhombic geometry for reliable milling of steel and cast iron; order this insert directly via Metav Werkzeuge or consult the team for application advice. CNMU160812-D57T WKP25S milling insert by Walter Tools — 80° rhombic, Tiger·tec Silver coating, for steel and cast iron The CNMU160812-D57T WKP25S is a precision milling insert designed for productive finishing and semi-finishing operations in steel and cast iron, offering enhanced wear resistance through its Tiger·tec Silver technology. Tiger·tec Silver coating for extended life WKP25S grade optimised for steel and cast iron 80° rhombic shape for versatile milling 0° negative rake and 1.2 mm corner radius Consistent process reliability with advanced coating technology The insert’s Tiger·tec Silver coating and the WKP25S carbide grade deliver a combination of thermal stability and wear resistance tailored to the demands of machining steel and cast iron. This results in predictable tool life and fewer unscheduled tool changes, improving overall throughput. By stabilising the cutting edge at elevated temperatures, the coating supports steady metal removal rates and promotes a uniform surface finish — a compelling rational advantage for production environments seeking reproducible results. Geometry that improves cutting stability and surface quality The 80° rhombic shape paired with a 1.2 mm corner radius and 0° rake (negative) produces a robust cutting edge that resists chipping and maintains dimensional stability during interrupted cuts. The integrated chipbreaker D57T controls chip formation for the target materials, reducing the risk of built-up edge and improving swarf evacuation. These geometric choices translate into tangible benefits: longer insert life, more consistent component tolerances and fewer rework cycles. Practical compatibility and selection ease for toolrooms With a compact 16 size and a standard tolerance class M, this insert fits common toolholder systems used in milling centres and CNC machining. The specification supports efficient integration into existing tool inventories while the Tiger·tec Silver series naming aids quick grade selection. For shop floors aiming to streamline set-up and reduce process variation, this insert offers a pragmatic balance of durability and versatility. If additional machining parameters are required for a specific set-up, the technical team can advise on cutting speeds and feeds for optimal results. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and ensure the correct grade and geometry for steel and cast iron milling applications Technical data SKU: CNMU160812-D57T-WKP25S-WALTER Designation: CNMU160812-D57T WKP25S Brand: Walter Tools Product type: Milling indexable insert Series: Tiger-tec Silver Grade: WKP25S Facts Corner radius: 1.2 mm Rake angle: 0° (negative) Shape: Rhombus 80° Size: 16 Thickness: 08 Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: D57T Applicable materials: Steel (P), Cast iron (K) Base material: Coated cemented carbide Execution: U FAQ Is this insert suitable for stainless steel? The CNMU160812-D57T WKP25S insert is specified for steel and cast iron; stainless steel suitability is not indicated for this grade. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver on the CNMU160812-D57T WKP25S increases thermal stability and wear resistance, improving tool life and process consistency in steel and cast iron machining. Which chipbreaker is fitted and what does it do? This insert uses the D57T chipbreaker, which promotes controlled chip formation and reliable swarf evacuation during typical steel and cast iron operations. How does the 0° negative rake affect cutting? A 0° negative rake creates a stronger cutting edge and increased edge life, suitable for robust milling conditions and interrupted cuts. What tolerance and size standards apply? The insert is produced to tolerance class M, size 16, with a plate thickness of 08, matching common holder systems for secure mounting. Can this insert be used for roughing and finishing? The geometry and grade support both semi-finishing and finishing tasks; selection of specific parameters will depend on the application and machine capability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named manufacturers. The offered article is an original, brand-new product from the manufacturer.
CNMU160812-D57T WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, robust rhombic 80° geometry and proven suitability for steel and cast iron to increase machining productivity and process stability; order the CNMU160812-D57T WKP35S directly via Metav Werkzeuge or consult our application specialists for cutting data and recommendations. CNMU160812-D57T WKP35S milling insert by Walter Tools — Tiger·tec Silver, rhombic 80° geometry The CNMU160812-D57S WKP35S is a rhombic 80° milling insert engineered for productive and reliable machining of steel and cast iron, combining a coated carbide grade with a 1.2 mm corner radius and negative clearance for demanding milling tasks. Tiger·tec Silver coating technology Suited for steel and cast iron machining Rhombic 80° geometry for versatile milling 1.2 mm corner radius for stable cutting Delivering consistent productivity with Tiger·tec Silver The coated carbide grade from the Tiger·tec Silver series provides a balance between wear resistance and reliable chip control, which translates into longer tool life and fewer indexings. Designed for the typical heat generation and chip formation when machining steels and the abrasive nature of cast iron, the grade WKP35S offers improved process security. As a result, cycle times can be shortened and the cost per part is reduced thanks to lower insert consumption and predictable tool performance under continuous production. Geometry and edge design that support stable cutting The rhombic 80° geometry, combined with a 0° (negative) relief angle and a 1.2 mm corner radius, produces a robust cutting edge suited to a wide range of milling operations, from finishing to more heavy-duty passes. The negative clearance increases edge strength for intermittent cuts and interrupted surfaces, while the defined corner radius improves surface quality and supports consistent chip evacuation. These design choices mean fewer unexpected tool failures and a steadier surface finish on components, which is particularly valuable in batch production. Application focus and process benefits for metalworking shops Intended primarily for the machining of unalloyed and alloyed steel (ISO group P) and cast iron (ISO group K), this insert is a practical choice where material variability and abrasive conditions are common. The combination of a coated hardmetal substrate and the D57T chipbreaker geometry helps to maintain stable chip formation across a range of cutting parameters, enabling more reliable machining windows and easier parameter transfer between machines. For operations seeking reproducible results and reduced setup tuning, this insert supports consistent output and contributes to overall process efficiency. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and to request specific cutting data or batch pricing for the CNMU160812-D57T WKP35S Technical data Article number: CNMU160812-D57T-WKP35S-WALTER Manufacturer: Walter Tools Product type: milling insert Designation: CNMU160812-D57T WKP35S Series: Tiger·tec Silver Core technical data Shape: Rhombus 80° Inscribed circle / size: 16 Thickness: 08 Corner radius: 1.2 Relief / clearance angle: 0° (negative) Tolerance class: M Grade / sort: WKP35S Chipbreaker: D57T Execution: U Materials & special features Coating: Tiger·tec Silver Substrate: coated carbide (WKP35S) Suitable for: steel (P) and cast iron (K) Application focus: general milling operations with emphasis on process security and wear resistance FAQ What materials is this insert suitable for? The CNMU160812-D57T WKP35S is designed for machining steel (ISO group P) and cast iron (ISO group K), with the Tiger·tec Silver grade optimised for those material behaviours. Which operations benefit most from the rhombic 80° geometry? Rhombic 80° inserts are versatile for a range of milling tasks; the geometry of this insert supports both finishing passes and more robust milling where edge strength and access angles matter. How does the Tiger·tec Silver coating improve performance? Tiger·tec Silver enhances wear resistance and thermal stability, leading to longer tool life, better surface quality and more predictable chip control in steel and cast iron machining. What does the 0° (negative) relief angle mean in practice? A 0° negative relief increases the cutting edge strength and is advantageous for interrupted cuts or heavy engagement, helping to prevent edge chipping under demanding conditions. What does tolerance class M indicate for this insert? Tolerance class M denotes the dimensional tolerance level of the insert, ensuring consistent fit and repeatable seating in tool holders for reliable indexing and performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. No affiliation between our company and the named brands is implied. The offered item is original, factory-new goods of the manufacturer Walter Tools.
CNMU160812-D57T WPP35G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and the WPP35G grade for reliable steel machining; the combination of stable chip control, an 80° rhombic form and a 1.2 mm corner radius supports consistent surface finish and tool life. Order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. CNMU160812-D57T WPP35G — Indexable milling insert for steel, Tiger·tec Gold (Walter Tools) The CNMU160812-D57G WPP35G is an indexable milling insert designed for steel machining, combining a rhombic 80° geometry with a D57T chipbreaker and Tiger·tec Gold coated carbide for productive cutting performance Tiger·tec Gold coated carbide For machining steel (ISO P) Rhombic 80° shape, 1.2 mm corner radius Negative rake 0° with D57T chipbreaker Efficient, repeatable milling for steel production The Tiger·tec Gold coating paired with the WPP35G grade provides a balance between wear resistance and toughness that suits a broad range of steel applications (ISO P). The coated carbide substrate reduces flank wear and improves resistance to thermal loading during interrupted cuts, which translates into longer tool life and fewer index changes. The D57T chipbreaker is engineered to produce stable chips when machining steels, reducing the risk of re-cutting and minimising downtime for chip management. This section focuses on measurable efficiency gains and process stability rather than abstract promises. Geometry and cutting behaviour that support precision and surface quality The rhombic 80° shape combined with a 1.2 mm corner radius and a 0° negative relief angle promotes secure positioning in the milling cutter and reliable edge strength for shoulder and face milling tasks. The geometry delivers controlled cutting forces and helps maintain consistent dimensional accuracy across batches. For applications where edge strength and surface finish matter, the insert’s form factor supports both roughing and semi-finishing passes while preserving component integrity. Practical advantages for shop-floor integration From a production standpoint, the insert’s tolerance class M and standard ISO designation allow straightforward tool planning and inventory management. The insert is suitable for general steel machining and offers predictable behaviour across different feed and speed windows when paired with appropriate cutter bodies. Reduced tool change frequency and consistent machining results contribute to measurable cost savings per component and a more efficient production flow. Application advice and process considerations When processing medium to high-strength steels, select cutting parameters that leverage the coating’s thermal stability: moderate cutting speeds, stable feeds and appropriate coolant application where needed. The D57T chipbreaker performs best when chip thickness is kept within recommended ranges for the material group; this results in compact chips and improved evacuations in pockets and slots. For unconventional alloys or highly interrupted cuts, consult the technical spec sheet or Metav Werkzeuge’s advisors to verify parameter windows and optimisation strategies. For order placement or application support for the CNMU160812-D57T WPP35G indexable milling insert, contact Metav Werkzeuge to ensure the optimal grade and geometry for the specific steel application. Technical Data Article number / SKU: CNMU160812-D57T-WPP35G-WALTER Product type: Indexable milling insert Brand: Walter Tools ISO designation: CNMU160812-D57T WPP35G Core data Plate size: 16 Plate thickness: 08 Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP35G (coated carbide) Chipbreaker: D57T Shape: Rhombic 80° Material application: Steel (ISO P) FAQ What materials is this insert suited for? The CNMU160812-D57T WPP35G insert is designed for steel machining (ISO P); the WPP35G grade and Tiger·tec Gold coating optimise performance for typical steel cutting conditions. How does the D57T chipbreaker affect machining? The D57T chipbreaker on the CNMU160812-D57G WPP35G helps form compact chips during steel machining, improving chip evacuation and reducing the risk of recutting. What benefits does the Tiger·tec Gold series deliver? Tiger·tec Gold coating on the WPP35G grade increases wear resistance and thermal stability, which supports longer tool life and consistent cutting performance in steel applications. Is the 1.2 mm corner radius suitable for finishing? A 1.2 mm corner radius provides a good compromise between edge strength and surface finish; for fine finishing passes consider the cutter configuration and feed rates to achieve the required surface quality. What does the negative 0° relief angle mean for setup? The negative 0° relief angle indicates a robust cutting edge and secure seating in the cutter body, which can enhance stability for heavier cuts and interrupted milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Trademark names and protected designations are mentioned solely for explanatory purposes. There is no affiliation or partnership between Metav Werkzeuge and the named brands. The offered item is an original, factory-new product from the manufacturer.
CNMU160812-D57T WSP45G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and a robust Rhombus 80° geometry for stable chip control and extended tool life; the result is predictable milling performance and fewer tool changes. Order the CNMU160812-D57T WSP45G milling insert directly via Metav Werkzeuge or contact our consultants for tailored advice. CNMU160812-D57T WSP45G milling insert — Tiger·tec Gold, Rhombus 80°, 0° negative rake, Walter Tools A high-performance indexable milling insert designed for general-purpose milling in steels, stainless steels and heat-resistant alloys where consistent chip control and edge stability are essential Tiger·tec Gold PVD coating Rhombus 80° cutting geometry 0° negative rake for stable cutting Suitable for steel, stainless and superalloys Optimised coating and grade for reliable edge life The Tiger·tec Gold PVD coating paired with the WSP45G grade delivers a balance of toughness and wear resistance that reduces flank wear in interrupted and continuous milling. This coating technology supports stable cutting at elevated temperatures, meaning fewer unexpected tool replacements and more predictable production cycles. The combination is particularly advantageous where thermal load and adhesion risk are high, as the coated carbide substrate preserves the cutting edge and improves lifetime under varied cutting conditions. Geometry that enhances milling efficiency and chip control The Rhombus 80° shape and the 1.2 mm corner radius offer a robust cutting edge with improved strength for both slotting and face milling operations. The 0° negative rake contributes to a conservative cutting action that stabilises the cutting process, especially in roughing or when machining interrupted surfaces. As a result, machining runs benefit from reduced vibration and consistent surface finish, translating into lower scrap rates and a steadier process window. Broad material capability for versatile applications Designed for ISO groups P, M and S, this insert tackles unalloyed and alloyed steel, stainless steels and heat-resistant superalloys including titanium alloys. The grade’s toughness accommodates the difficult chip formation and heat generation typical of these materials, enabling safer machining of sticky or gummy steels as well as hard-to-cut high-temperature alloys. Using a single insert type across these groups simplifies tool inventory and improves shop-floor flexibility. Predictable production through tolerance and design details With a tolerance class M, an indexable plate thickness of 08 and the D57T chipbreaker, the insert offers dimensional consistency and controlled chip segmentation. These characteristics reduce the need for constant parameter adjustments and help maintain part quality batch after batch. The solid engineering behind the insert supports steady cycle times and contributes to overall process reliability, an essential factor in production planning and cost-efficiency. Contact Metav Werkzeuge today to discuss how the CNMU160812-D57T WSP45G Tiger·tec Gold insert can be integrated into existing operations and to request cutting-data recommendations from our technical consultants Technical data Article number: CNMU160812-D57T-WSP45G-WALTER Designation: CNMU160812-D57T WSP45G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Shape: Rhombus 80° Corner radius: 1.2 mm Relief / rake: 0° (negative) Thickness: 08 Chipbreaker: D57T Tolerance class: M Special features Coating: Tiger·tec Gold (PVD, coated carbide) Grade / sort: WSP45G Material suitability: P / M / S (steel, stainless steels, superalloys/titanium) Execution: U FAQ What materials can this insert machine effectively? The CNMU160812-D57T WSP45G insert is suitable for ISO groups P, M and S, meaning unalloyed and alloyed steel, stainless steels and heat-resistant superalloys including titanium. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold coating on the WSP45G grade improves wear resistance and thermal stability, delivering longer edge life and more consistent cutting performance in demanding milling applications. Is the insert suitable for interrupted cuts and roughing? Yes, the Rhombus 80° geometry combined with the 0° negative rake and 1.2 mm corner radius provides the robustness needed for interrupted cuts and roughing operations. Which chipbreaker is fitted and what is its effect? The D57T chipbreaker offers controlled chip formation and assists in evacuating chips reliably, supporting cleaner machining and reducing the risk of chip re-cutting. Die Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original, brand-new product from the manufacturer. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
CPGT050202-X15 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of sharp edge geometry, a non-coated carbide grade tuned for aluminium and reliable Walter quality to achieve consistent chip control and economical regrinds; order through Metav Werkzeuge or consult their technical team for process optimisation. CPGT050202-X15 WAK15 — Drill and Boring Indexable Insert for Aluminium | Walter Tools The CPGT050202-X15 WAK15 is a rhombic 80° indexable insert engineered for drilling and boring operations in aluminium and other non‑ferrous metals, offering controlled chip formation and predictable cutting performance. Uncoated carbide grade WAK15 Optimised for aluminium and non‑ferrous metals Rhombic 80° geometry for versatile use 11° clearance with 0.2 mm corner radius Consistent chip control for aluminium machining Designed around the WAK15 carbide grade and an X15 chipbreaker, this insert prioritises clean chip formation when machining aluminium and similar non‑ferrous materials. The uncoated carbide substrate gives a sharp, low‑adhesion cutting edge that reduces built‑up edge and the need for frequent regrinds. For engineers looking to reduce scrap and improve surface integrity, the result is a more reliable process window: shorter cycle variability, fewer tool changes and a repeatable finish quality that supports downstream operations. Geometry and clearance that improve stability and tool life The Rhombic 80° shape combined with an 11° clearance angle and a 0.2 mm corner radius balances cutting edge strength with accessibility in recessed or stepped features. This geometry delivers lateral stability during drilling and bore enlargements while keeping the cutting edge exposed enough to evacuate chips effectively. The insert’s form factor and tolerance class G make it suitable for indexed toolholders where repeatable seating and positioning are essential for consistent concentricity and bore tolerance control. Tailored for non‑ferrous ISO group N and simple material selection Classified for ISO group N, this insert is explicitly intended for aluminium and non‑ferrous metals; tool selection is therefore simplified for mixed production runs that prioritise these materials. Using an insert from the Walter N‑Sortensystem reduces trial‑and‑error in grade choice and supports predictable results across alloy variations. The insert format CPGT050202‑X15 and the X15 chipbreaker enable process engineers to match cutting data quickly and exploit toolholder inventories without extensive reprogramming. Practical handling and integration in production As an indexable insert, this grade reduces downtime by allowing fast indexing and consistent reset after regrind or replacement. The standardised designation and series support straightforward ordering and stock management. Combined with Walter Tools’ manufacturing standards, the insert offers a pragmatic route to improving throughput on machines used for light alloy components, where chip control and surface quality directly affect assembly fit‑up and cosmetic requirements. For reliable aluminium performance choose Walter Tools inserts like the CPGT050202‑X15 WAK15 and contact Metav Werkzeuge for ordering or process advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CPGT050202-X15-WAK15-WALTER Designation: CPGT050202-X15 WAK15 Product label: Bohr-/Aufbohrwendeschneidplatte CPGT050202-X15 WAK15 Walter Tools Manufacturer: Walter Tools Facts Clearance angle: 11° Corner radius: 0.2 mm Insert shape: Rhombus 80° Size code: 05 Thickness code: 02 Chipbreaker: X15 Tolerance class: G Special features Uncoated carbide grade WAK15 Series: Walter N‑Sortensystem Application: Aluminium and non‑ferrous metals (ISO 513 — group N) Format / designation: CPGT050202-X15 Execution code: T Material code: N FAQ What materials is this insert suitable for? The CPGT050202‑X15 WAK15 insert from Walter Tools is intended for aluminium and other non‑ferrous metals, corresponding to ISO group N. Which insert geometry ensures stability for boring operations? The rhombic 80° geometry with an 11° clearance and 0.2 mm corner radius offers stability and chip control, making the CPGT050202‑X15 WAK15 appropriate for a range of drilling and boring tasks in non‑ferrous materials. Is the WAK15 grade coated or uncoated? The WAK15 grade used in this insert is uncoated carbide, selected to provide a sharp edge and reduced adhesion when cutting aluminium. How does the X15 chipbreaker affect machining? The X15 chipbreaker promotes short, controllable chips and helps avoid material build‑up on the cutting edge, improving surface finish and reducing interruptions during runs with the CPGT050202‑X15 WAK15. How is the insert identified for ordering and inventory? Order and stock by the SKU CPGT050202‑X15‑WAK15‑WALTER and the designation CPGT050202‑X15 WAK15; both appear on the tool documentation and packaging. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPGT050202-X15 WTP35 T Wendeplatten - Walter Tools
Benefit from a balanced combination of precise geometry, a coated carbide grade and a defined chipbreaker that together support predictable tool life and repeatable component quality. Use the Rhombus 80° form, 0.2 mm corner radius and 11° clearance angle for stable engagement in drilling and boring operations. Order the CPGT050202-X15 WTP35 insert directly via Metav Werkzeuge or ask our consultants if needed. CPGT050202-X15 WTP35 — Indexable insert for drilling/boring (Rhombus 80°, 0.2 mm radius) by Walter Tools CPGT050202-X15 WTP35 is a coated-carbide indexable insert intended for drilling and boring applications where consistent chip formation and dimensional control are required Rhombus 80° geometry for versatile cutting Coated carbide grade WTP35 for wear resistance 0.2 mm corner radius for precision edge 11° clearance angle reduces cutting forces Reliable geometry for repeatable hole quality The rhombic 80° geometry combined with a 0.2 mm corner radius delivers a predictable engagement angle that helps maintain hole form and repeatability. The insert’s defined relief of 11° reduces rubbing at the flank and lowers cutting forces, which in turn helps to protect the toolholder and minimise vibration in serial production. As a coated carbide grade, WTP35 offers improved wear resistance compared with uncoated grades; this supports longer tool life in many machining routines while maintaining consistent dimensional results. Effective chip control and surface finishing The integrated chipbreaker X15 is designed to influence chip flow during drilling and boring, helping to avoid long swarf and to improve evacuation from the hole. Better chip control contributes directly to surface finish and reduces the risk of re-cutting chips on the cutting edge. Where surface quality is critical, the combination of a coated grade and the insert geometry ensures more consistent finishes and reduces secondary operations. For applications that require particular surface roughness or special cutting parameters, verify compatibility against the product matrix. Practical selection and application guidance The insert is supplied in execution T and is marked by the designation CPGT050202-X15, enabling simple identification in tool assemblies. Material selection for optimal performance depends on the specific workpiece and machining strategy; the WTP35 grade is a coated carbide and its suitability should be checked using the manufacturer’s product matrix. For setup, prefer stable clamping and a toolholder that supports the Rhombus 80° seat to maintain rigidity. Where high process reliability is required, validate cutting data on representative parts and adjust feeds and speeds progressively. Contact Metav Werkzeuge for advice on CPGT050202-X15 WTP35 compatibility and fast availability via Metav Werkzeuge (info@metav-werkzeuge.com, +49 2822 7131930) Technical Data Article number: CPGT050202-X15-WTP35-WALTER Designation: CPGT050202-X15 WTP35 Series: Walter Schneidstoffsorte - Serie offen Grade: WTP35 Product type: Bohr-/Aufbohrwendeschneidplatte Execution: T Facts Clearance angle: 11° Corner radius: 0.2 mm Plate form: Rhombus 80° Plate size: 05 Plate thickness: 02 Tolerance class: G Special features Coated carbide grade WTP35 Chipbreaker: X15 Designation without grade: CPGT050202-X15 Material: Catalogue dependent Intended for drilling and boring indexable insert applications FAQ What materials is this insert suitable for? The suitability of the CPGT050202-X15 WTP35 insert depends on the workpiece material; WTP35 is a coated carbide grade and compatibility should be checked against the manufacturer’s product matrix before series use. How does the chipbreaker affect machining? The X15 chipbreaker shapes chip flow to improve evacuation during drilling and boring, reducing the chance of long swarf and improving surface quality on the machined hole. What does the designation CPGT050202-X15 mean? The designation identifies the insert form and key geometry: rhombic 80° profile, thickness and size coding, together with chipbreaker X15 and the base designation CPGT050202-X15. Is special clamping required for this insert? A rigid, correctly matched toolholder for rhombic inserts is recommended to preserve the 0.2 mm corner and to ensure consistent cutting conditions during drilling and boring. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of Walter Tools.
CPGT050202-X15 WXM15 Wendeplatten - Walter Tools
Benefit from clean, low‑adhesion cutting in non‑ferrous materials provided by the WXM15 uncoated carbide and the X15 chipbreaker; the robust rhombic geometry and 11° relief support consistent tool life and precise holemaking. Order directly via Metav Werkzeuge or consult their specialists for application advice. Bohr-/Aufbohrwendeschneidplatte CPGT050202-X15 WXM15 — Walter Tools (chipbreaker X15, Rhombic 80°, 11° relief) The CPGT050202-X15 WXM15 is an indexable insert for drilling and boring applications, optimised for machining non‑ferrous metals with a sharp geometry and controlled chip formation Rhombic 80° insert form Uncoated carbide grade WXM15 Optimised for non‑ferrous metals 11° relief angle for sharp cutting Consistent chip control for productive holemaking The combination of the X15 chipbreaker with the WXM15 uncoated carbide enables reliable chip segmentation and evacuation during drilling and boring in aluminium, copper and brass. This geometry reduces material build‑up on the cutting edge and helps maintain dimensional stability in successive holes. The insert’s design translates into fewer interruptions for chip clearing and a steadier machining cycle, which supports higher process efficiency and predictable part quality. Accurate geometry that reduces rework and setup time A rhombic 80° seat and an 11° relief angle create a stable cutting condition that preserves edge sharpness and repeatability. The small corner radius (0.2 mm) offers a balance between edge strength and cutting precision, improving hole finish without excessive cutting forces. For workshops aiming to streamline setups, these features contribute to predictable tool behaviour and consistent hole tolerances, reducing the need for corrective machining and lowering scrap rates. Application guidance and workshop integration Specified for the Walter N‑sortensystem and coded for N — non‑ferrous materials, the insert suits a wide range of light‑metal and copper‑alloy applications where low adhesion and clean chip control are critical. The insert is available in plate size 05 and execution T, which fits standard indexable toolholders suited to production drilling and boring operations. For tailored cutting data and holder recommendations, Metav Werkzeuge can supply application sheets and machining parameters to match specific machines and workpiece alloys. Contact Metav Werkzeuge today to specify the Walter Tools CPGT050202-X15 WXM15 for non‑ferrous production and receive customised machining advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: CPGT050202-X15-WXM15-WALTER Article name: CPGT050202-X15 WXM15 Manufacturer: Walter Tools Series: Walter N‑Sortensystem Facts Relief angle: 11° Corner radius: 0.2 mm Plate form: Rhombus 80° Plate size: 05 Plate thickness: 02 Tolerance class: G Special features Chipbreaker: X15 Grade: WXM15 (uncoated carbide) Application group: N (non‑ferrous metals) Execution: T FAQ What materials is this insert intended for? The CPGT050202-X15 WXM15 insert is designed primarily for non‑ferrous metals (ISO group N), making it suitable for aluminium, copper and brass applications. How does the X15 chipbreaker affect machining? The X15 chipbreaker promotes controlled chip formation and prevents material build‑up on the cutting edge, which helps maintain surface finish and reduces interruptions during drilling and boring with the insert. Is this insert compatible with standard indexable drilling holders? Yes, the rhombic 80° form and execution T correspond to common indexable toolholder systems; check toolholder seat and clamping dimensions against the insert designation CPGT050202-X15 WXM15 for compatibility. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
CPGT050202-X5 WAK15 Wendeplatten - Walter Tools
Benefit from the combination of a sharp, positive cutting geometry, the WAK15 uncoated carbide grade and an X5 chipbreaker to achieve efficient, low-adhesion aluminium machining; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CPGT050202-X5 WAK15 — Drilling/Boring indexable insert (Rhombic 80°), Walter Tools A CPGT050202-X5 WAK15 drilling/boring indexable insert engineered for productive machining of aluminium and other non‑ferrous metals, featuring a positive relief and a fine corner radius for clean finishing. Rhombic 80° insert geometry 11° relief angle for positive cutting 0.2 mm corner radius for fine finishing WAK15 uncoated carbide for aluminium Precise geometry that improves component quality The Rhombic 80° shape combined with an 11° relief produces a positive cutting action that reduces cutting forces and improves chip flow when working with aluminium. This geometry supports consistent tool engagement in bore and drilling operations, resulting in a more uniform hole quality and reduced tendency for material build‑up. The small 0.2 mm corner radius helps to deliver a smoother surface finish without sacrificing edge strength, so the insert contributes directly to tighter tolerance achievement and fewer secondary operations. Material grade and chip control for non‑ferrous machining The WAK15 is an uncoated carbide grade tailored for non‑ferrous metals and aluminium; its composition and the X5 chipbreaker are optimised to prevent material adhesion and to form short, controllable chips. In practice this means improved process reliability and less downtime for cleaning or rework. For shops that handle high volumes of aluminium components, the combination of sharp cutting edge and dedicated chipformer reduces cycle times and lowers scrap rates, delivering measurable productivity gains. Production benefits: economy and handling An indexable solution such as this insert reduces tool change complexity and keeps inventory simple, as insert geometry and grade are standardised across the Walter N‑Sortensystem series. The positive cutting geometry lowers feed forces, allowing stable operation at higher feed rates in many cases; this leads to a favourable cost‑per‑hole metric and a quick return on tooling investment. The insert’s dimensions and standard fitting make it compatible with a wide range of holders used in common drilling and boring applications. Compatibility, setup and safe use The insert is supplied in the CPGT050202‑X5 form factor and fits holders designed for Rhombic 80° inserts; its positive relief and dedicated chipbreaker ease setting up feeds and speeds for aluminium alloys and similar non‑ferrous materials. When programming and selecting parameters, prioritise reduced cutting speeds compared with ferrous machining and ensure adequate coolant or air blast to assist chip evacuation. The clear designation of grade and geometry simplifies tooling decisions and tool management on the shop floor. Contact Metav Werkzeuge today to discuss how the Walter Tools CPGT050202-X5 WAK15 insert can improve aluminium throughput and finish quality; specialists are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: CPGT050202-X5-WAK15-WALTER Designation: CPGT050202-X5 WAK15 Manufacturer: Walter Tools Product type: Drilling/boring indexable insert Facts Relief angle: 11° Corner radius: 0.2 mm Insert shape: Rhombus 80° Chipbreaker: X5 Insert size: 05 Plate thickness: 02 Special features Carbide grade: WAK15 (uncoated carbide) Series: Walter N‑Sortensystem Optimised for: aluminium and non‑ferrous metals Positive cutting geometry for low cutting forces Designed to minimise material adhesion and improve chip control FAQ What materials is this insert suitable for? The CPGT050202‑X5 WAK15 insert is designed primarily for aluminium and other non‑ferrous metals; the WAK15 uncoated carbide grade and X5 chipbreaker reduce adhesion and improve chip control. Can this insert be used in standard bore holders? Yes, the insert’s Rhombic 80° form and CPGT050202‑X5 designation match common holders for Rhombic inserts used in drilling and boring operations. How does the 0.2 mm corner radius affect finish? A 0.2 mm corner radius provides a balance between edge strength and surface quality, enabling fine finishing while maintaining resistance to edge chipping in aluminium machining. Is the grade coated or uncoated, and why does that matter? WAK15 is an uncoated carbide grade; for aluminium machining, uncoated grades with sharp edges often reduce built‑up edge and adhesion compared with some coated grades. Where can one get parameter recommendations for this insert? Parameter guidelines and application advice are available from Metav Werkzeuge; the CPGT050202‑X5 WAK15 designation simplifies selection for the relevant holder and workpiece material. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, brand‑new product of the manufacturer.
CPGT050202-X5 WTP35 WTP35 Wendeplatten - Walter Tools
Take advantage of the combination of a WTP35 coated carbide grade, a rhombic 80° form and a precise 0.2 mm corner radius for consistent hole preparation and controlled chip formation; order the insert directly via Metav Werkzeuge or consult the technical team for exact workpiece suitability. CPGT050202-X5 WTP35 drill/boring indexable insert, rhombic 80° form, WTP35 grade — Walter Tools The CPGT050202-X5 WTP35 is a coated cemented-carbide indexable insert for drilling and boring operations, supplying a balanced compromise between edge strength and chip control for a range of machining tasks. Coated carbide grade WTP35 for stable performance Rhombic 80° form for versatile hole preparation 0.2 mm corner radius for precise edge definition 11° clearance for controlled chip flow Reliable cutting performance from a modern coated grade The insert is produced in the WTP35 cutting grade, a coated cemented carbide composition developed for reliable cutting across many applications. The coating increases wear resistance and thermal stability, which helps maintain tool life under interrupted drilling or when re‑boring. This results in fewer index changes and more predictable cycle times, improving process efficiency in repetitive operations. The grade is described in the product matrix; workpiece suitability should be checked against specific material requirements to ensure optimal results. Shape and geometry that improve hole quality The rhombic 80° plate geometry offers an advantageous seating and approach angle for drills and boring heads, supporting consistent entry and exit behaviour when producing holes. Combined with an 11° clearance this geometry helps direct chip flow away from the cutting zone and reduces rubbing on the flank, which improves surface finish and reduces heat build‑up. Where surface integrity is critical, this insert geometry helps achieve tighter tolerances and more uniform bore finishes. Edge definition and chip control for repeatable results A 0.2 mm corner radius balances edge strength and sharpness: it gives sufficient toughness to resist chipping while still allowing a clean cutting edge for accurate hole diameter control. The integrated X5 chipbreaker stabilises chip formation in many cutting conditions, reducing the likelihood of long, stringy chips in through‑hole work and easing evacuation in blind holes. The result is improved tool life, reduced downtime and more consistent part quality. Practical indexing and compatibility for workshop use The insert is supplied in the short designation CPGT050202-X5 and is available in the plate size code 05 with thickness code 02, making it compatible with a variety of standard drill and boring holders designed for rhombic 80° inserts. The tolerance class G supports interchangeability within established toolholder systems. For integration into existing setups, refer to holder specifications and the product matrix to confirm mechanical fit and recommended cutting data for the intended material. For tailored recommendations on Walter Tools inserts such as the CPGT050202-X5 WTP35, contact Metav Werkzeuge for technical advice and procurement. Technical data Article number: CPGT050202-X5-WTP35-WALTER ISO designation: CPGT050202-X5 WTP35 Series: Walter Schneidstoffsorte - Serie offen Brand: Walter Tools Facts Clearance angle: 11° Corner radius: 0.2 mm Plate form: Rhombus 80° Plate size code: 05 Plate thickness code: 02 Chipbreaker: X5 Tolerance class: G Special features Coated cemented carbide grade WTP35 Execution/type: T Short designation: CPGT050202-X5 Sort and series information included in product matrix Catalogue-dependent material specification FAQ What material is the CPGT050202-X5 WTP35 intended for? The CPGT050202-X5 WTP35 insert is provided in the WTP35 coated carbide grade; specific suitability for a given workpiece material should be verified in the product matrix and with the manufacturer’s cutting data. Which geometry does the insert use and what benefit does it give? The insert has a rhombic 80° shape with a 0.2 mm corner radius, which supports consistent hole entry and exit, improved surface finish and enhanced edge strength for repeatable bore dimensions. How does the X5 chipbreaker affect machining? The X5 chipbreaker promotes controlled chip formation, aiding chip evacuation in through and blind holes and reducing heat concentration at the cutting edge for longer tool life. How to identify the insert in ordering and tool lists? This item is identified as CPGT050202-X5 WTP35 (SKU: CPGT050202-X5-WTP35-WALTER); the ISO designation and plate codes (size 05, thickness 02) assist in selecting compatible holders. Are there any special handling or setup recommendations? Use holders specified for rhombic 80° inserts and consult the manufacturer’s recommended cutting data; the WTP35 grade benefits from stable clamping and standard coolant practices for coated carbide tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, brand‑new product from the manufacturer.
CPGT050202-X5 WXM15 Wendeplatten - Walter Tools
Benefit from high productivity and precise chip control through the combination of an uncoated carbide grade, a compact Rhombus 80° geometry and a finely ground 0.2 mm corner radius for reliable drilling and boring in non‑ferrous materials; order through Metav Werkzeuge or consult our advisors for application support. CPGT050202-X5 WXM15 drilling/boring indexable insert — uncoated carbide, Rhombus 80°, Walter Tools A CPGT050202-X5 WXM15 indexable insert designed for efficient drilling and bore‑spot enlarging in non‑ferrous metals, providing sharp cutting edges and controlled chip formation for production environments Uncoated carbide grade WXM15 Optimised for non‑ferrous metals (N) Rhombic 80° cutting geometry 0.2 mm corner radius, 11° clearance Faster, cleaner machining of non‑ferrous alloys The combination of the WXM15 uncoated carbide grade and a geometry tailored to N‑materials results in noticeably improved cutting performance when working with aluminium, copper and brass. The composition of the grade provides a very sharp cutting edge with low adhesion tendency, which reduces built‑up edge and minimises interruptions in flow production. As a consequence, cycle times are shortened and finish quality is elevated without complex process changes, delivering a measurable efficiency gain for batch and continuous machining operations. Geometry that stabilises the cut and manages chips The Rhombus 80° shape together with the X5 chipbreaker fosters reliable chip control and consistent surface quality. The small 0.2 mm corner radius and the 11° clearance angle balance edge strength and sharpness: this improves entry behaviour in through‑holes and bore enlargements while maintaining dimensional stability. For operators with limited experience of insert geometry, the chipbreaker reduces the risk of entanglement and enables more predictable chip evacuation, which helps to avoid downtime related to chip clearing. System compatibility and production robustness Built for integration in the Walter N‑Sortensystem, the insert meets common industrial tolerance expectations (class G) and is available in the standard 05 size and 02 thickness, simplifying inventory planning. The uncoated design is particularly suited to applications where coating adhesion can be an issue or where coolant and lubrication strategies favour uncoated grades. The robust cutting edge geometry supports repeatable results in medium‑ to high‑volume production and contributes to reduced tool change frequency, lowering operational complexity and waste. Contact Metav Werkzeuge for tailored application advice on Walter Tools CPGT050202-X5 WXM15 inserts and to arrange supply or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CPGT050202-X5-WXM15-WALTER Label: Bohr-/Aufbohrwendeschneidplatte CPGT050202-X5 WXM15 Walter Tools Manufacturer: Walter Tools Core specifications Series: Walter N-Sortensystem Grade: WXM15 Geometry: Rhombus 80° Clearance angle: 11° Corner radius: 0.2 mm Plate size: 05 Plate thickness: 02 Special features Uncoated carbide Chipbreaker: X5 Tolerance class: G Execution: T FAQ What materials is this insert suitable for? The CPGT050202-X5 WXM15 insert is optimised for non‑ferrous metals (ISO group N), including aluminium, copper and brass, providing low adhesion and stable cutting. Is the insert coated? No, this insert uses an uncoated carbide grade (WXM15), chosen to maintain sharp edges and avoid coating‑related adhesion in soft metals. What benefits does the Rhombus 80° geometry provide? The Rhombus 80° shape offers good edge strength for drilling and bore enlarging while allowing versatile engagement angles and consistent chip control with the X5 chipbreaker. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius enhances edge durability compared with a razor edge, improving wear resistance while still enabling fine surface finishes in non‑ferrous applications. What system does this insert belong to and what tolerance does it meet? It is part of the Walter N‑Sortensystem and is produced to a G tolerance class, ensuring compatibility with standard indexable insert toolholders and repeatable positioning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
CPGT050202M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
High-precision finishing and stable chip control are combined in this cermet insert to extend edge life and deliver consistent surface quality; benefit from its FP2 chipbreaker and 0.2 mm corner radius and order directly via Metav Werkzeuge or request a tailored machining recommendation. CPGT050202M-FP2 WEP10C indexable insert – Rhombic 80° cermet insert by Walter Tools for boring and turning CPGT050202M-FP2 WEP10C is a rhombic 80° indexable insert designed for fine finishing in light turning and bore-enlarging operations, offering cermet toughness and an FP2 chipbreaker for controlled chips Cermet grade WEP10C for fine finishing FP2 chipbreaker for stable chip control Rhombic 80° geometry for versatile turning 0.2 mm corner radius for precise edge profile High-performance cermet grade for better finishes and longer life The insert employs a Cermet cutting material in the WEP10C grade, which prioritises wear resistance and thermal stability for finishing passes. Cermet combines ceramic and metallic properties to retain a sharp edge at elevated cutting temperatures; this results in a more consistent surface finish and reduced frequency of index changes. The integrated FP2 chipbreaker enhances chip formation at low to medium depths of cut, contributing to predictable machining behaviour and improved process stability. These factors together support higher overall productivity and lower tooling interruptions in serial production. Geometry and tolerance designed for predictable machining outcomes A Rhombic 80° shape with an 11° clearance angle and 0.2 mm corner radius balances strength and accessibility for internal and external turning. The geometry yields reliable engagement when profiling or finishing, while the modest radius ensures dimensional control and a fine edge profile. The insert conforms to tolerance class G, supporting interchangeability and repeatable positioning in standard toolholders. Such dimensional consistency reduces set-up time and minimises variation between cycles, making the component suitable for quality-sensitive production runs. Suitable process windows and application guidance from the Walter Cermet series Belonging to the Walter Cermet series, the insert is optimised for finishing and semi-finish operations where edge retention and surface quality are decisive. Material suitability should be verified against the product matrix, since the cermet grade excels in producing fine surfaces but may require specific cutting conditions for tougher or highly alloyed workpieces. The insert’s compact 05 size and 02 thickness provide a low-profile option for confined tool pockets and multi-tasking machines, delivering flexibility across smaller turning and boring setups. For best results, combine the insert’s geometry with appropriate feeds and cutting speeds for the chosen workpiece material. For tailored machining advice on Walter Tools Cermet inserts or to request a process recommendation, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CPGT050202M-FP2-WEP10C-WALTER ISO designation: CPGT050202M-FP2 WEP10C Manufacturer: Walter Tools Core data Grade/series: WEP10C / Walter Cermet Shape: Rhombus 80° Clearance/relief angle: 11° Corner radius: 0.2 mm Size: 05 Thickness: 02 Tolerance class: G Design & features Chipbreaker: FP2 Execution: T Cutting material: Cermet (catalogue-dependent) Intended use: boring and turning for finishing applications Notes: Verify workpiece suitability against product matrix FAQ What materials is this insert recommended for? The CPGT050202M-FP2 WEP10C insert uses a cermet grade optimised for finishing; material suitability should be checked in the product matrix for the Walter Cermet series to confirm performance on specific alloys. How does the FP2 chipbreaker influence machining? The FP2 chipbreaker on the CPGT050202M-FP2 WEP10C promotes stable chip formation at low to medium depths of cut, reducing the risk of long or tangled chips and supporting consistent surface quality. What advantage does the 0.2 mm corner radius provide? A 0.2 mm corner radius helps achieve a fine edge profile and tight dimensional control during finishing passes, balancing edge strength with the ability to produce smooth surfaces. Is the insert suitable for internal boring operations? The Rhombic 80° geometry and compact thickness make the insert appropriate for many internal boring and turning setups, provided the toolholder and cutting parameters match the intended application. What tolerance and repeatability can be expected? The insert is manufactured to tolerance class G, supporting repeatable positioning and interchangeability in standard indexable toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners and are mentioned here solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
CPGT050204-MK4 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of proven wear resistance, precise geometry and consistent chip control for reliable machining of cast iron; increase uptime with the high-performance Tiger‑tec Silver grade and request tailored cutting data from Metav Werkzeuge for seamless integration. CPGT050204-MK4 WKK20S – Indexable Turning Insert for Cast Iron, Tiger‑tec Silver | Walter Tools The CPGT050204-MK4 WKK20S is a rhombic 80° indexable turning insert designed for productive machining of cast iron components, offering a coated carbide grade optimised for abrasive, short-chip materials. Tiger‑tec Silver coating for extended tool life WKK20S grade optimised for cast iron Rhombic 80° geometry for versatile turning 11° clearance and 0.4 mm corner radius Durable coating and material pairing for consistent performance The combination of Tiger‑tec Silver coating and the WKK20S carbide grade provides a measurable advantage when machining abrasive cast iron. The specialised coating reduces flank and crater wear, which translates into longer service intervals and more predictable tool life. For production environments this reliability supports continuous operation and reduces machining variability, ensuring that the insert maintains dimensional stability even under interrupted cuts or heavy feed conditions. Geometry and chip control that improve process security The rhombic 80° shape and the chipbreaker MK4 are engineered to control the short, brittle chips typical of cast iron; this improves evacuation and minimises re-cutting. The 11° clearance prevents flank rubbing and helps to maintain a clean cutting edge, while the modest corner radius of 0.4 mm balances edge strength with surface finish—resulting in repeatable component quality and fewer rejected parts in series production. Practical advantages for workshop integration and tool management As an indexable turning insert, compatibility with standard toolholders and fast tool changes contribute directly to shop-floor efficiency. The insert's tolerance class G supports predictable seating and repeatable positioning, simplifying tool set-up and reducing downtime. Where process optimisation is required, pairing these inserts with appropriate cutting parameters enhances productivity and helps to meet throughput and surface-finish targets in cast-iron applications. Contact Metav Werkzeuge for cutting data sheets, application recommendations or to discuss how the Tiger‑tec Silver WKK20S insert can be integrated into existing tool systems — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical Data Article number: CPGT050204-MK4-WKK20S-WALTER Product designation: Drehwendeschneidplatte / indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKK20S Facts Clearance angle: 11° Corner radius: 0.4 mm Insert size: 05 Plate thickness: 02 Tolerance class: G Special features Coating: Tiger‑tec Silver Chipbreaker: MK4 Shape: Rhombic 80° Material suitability: cast iron (ISO group K) Designation: CPGT050204-MK4 WKK20S FAQ Which materials is this insert intended for? The CPGT050204-MK4 WKK20S from Walter Tools is intended primarily for cast iron (ISO group K), with the grade and coating optimised for abrasive, short‑chip behaviour. What benefits does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WKK20S grade increases wear resistance and thermal stability, which helps to extend effective tool life and maintain cutting-edge integrity during extended runs. How does the MK4 chipbreaker affect machining? The MK4 chipbreaker is designed for reliable chip control in cast iron, producing short, manageable chips that are easier to evacuate and less likely to interfere with the cutting process. Is the rhombic 80° geometry suitable for shoulder and profile turning? Yes, the rhombic 80° geometry provides a versatile cutting angle that performs well in general turning operations, offering a balance between strength and accessibility for shoulder and profile work. What does the 11° clearance and 0.4 mm radius mean for surface finish? An 11° clearance reduces rubbing at the flank face, while a 0.4 mm corner radius offers improved edge robustness with a favourable surface finish for typical cast‑iron components. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Walter Tools is mentioned for product identification purposes only. The offered article is an original, factory‑new product of the manufacturer. There is no affiliation between Metav Werkzeuge and the trademark owners.
CPGT050204-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, robust Rhombic 80° geometry and reliable chip control for consistent performance in demanding stainless-steel and superalloy machining. Order the CPGT050204-MM4 WSM20S directly via Metav Werkzeuge or ask our consultants if needed. CPGT050204-MM4 WSM20S drilling/turning indexable insert, Tiger·tec Silver – Walter Tools A CPGT050204-MM4 WSM20S insert designed for high‑temperature alloy and stainless‑steel machining in turning and drilling operations. Tiger·tec Silver coated carbide for heat resistance Optimised for stainless steels and superalloys Rhombic 80° geometry for versatile turning and drilling 11° clearance with 0.4 mm corner radius High‑performance grade for challenging materials The insert combines the WSM20S carbide grade and Tiger·tec Silver technology to deliver enhanced thermal stability and edge life when cutting tough materials. As a coated carbide insert, it supports secure chip formation and reduced built‑up edge during intermittent or continuous cuts; this is particularly valuable when machining stainless steels and nickel‑based superalloys, which generate high temperatures and stress the cutting edge. The specification CPGT050204‑MM4 defines the insert footprint and makes it suitable for integration in common turning and drilling toolholders where a rhombic shape is required. Geometry and edge design that improve process reliability The Rhombic 80° form offers a balance between cutting strength and accessibility in shoulder, facing and light boring tasks. The specified 11° clearance reduces rubbing and heat generation at the flank, while the 0.4 mm corner radius supports a robust edge that can withstand higher feed rates without premature chipping. The MM4 chipbreaker geometry promotes consistent chip segmentation, which simplifies evacuation in through‑tool and external machining. Together, these characteristics reduce unplanned tool changes and contribute to a steadier production flow. Productivity benefits and cost‑effectiveness in serial production Using a dedicated grade and optimised geometry means fewer interruptions for tool change and less scrap from poor surface finish. The combination of coating and grade yields longer tool life and more consistent part quality, which translates into lower unit costs in batch and continuous manufacture. The insert’s attributes support higher cutting speeds where application permits and help maintain dimensional repeatability across components. For operations aiming to raise throughput without compromising surface integrity, this insert provides a pragmatic upgrade. Integration into tooling systems and application guidance The insert is compatible with standard turning and drill holders accepting the CPGT form factor; selection of the correct seat and clamp influences performance, so secure clamping and correct orientation are essential. For machining stainless steels and heat‑resistant alloys, adopt stable setups, appropriate coolant strategies and modest depths of cut when approaching material limits. The grade and chipbreaker suit both intermittent and continuous cuts depending on holder rigidity, so pairing with a rigid toolbody will maximise the benefits of the Tiger·tec Silver technology and the WSM20S composition without compromising surface finish. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts and to discuss suitable toolholder pairings for specific stainless‑steel or superalloy operations. Technical Data Article number: CPGT050204‑MM4‑WSM20S‑WALTER Designation: CPGT050204‑MM4 ISO designation: CPGT050204‑MM4 WSM20S Series: Tiger‑tec Silver Grade: WSM20S Manufacturer: Walter Tools Facts Insert form: Rhombus 80° Insert size: 05 Plate thickness: 02 Clearance angle: 11° Corner radius: 0.4 mm Chipbreaker: MM4 Tolerance class: G Execution: T Special features Coated carbide grade Tiger·tec Silver Optimised for machining stainless steels (M) and superalloys/titanium (S) Stable chip formation and improved edge life Suitable for turning and drilling indexable toolholders FAQ What materials is this insert intended for? The CPGT050204‑MM4 WSM20S from Walter Tools is formulated for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and controlled chip formation. Which toolholders accept this insert form? Rhombic 80° indexable toolholders and compatible drill or turning bodies designed for CPGT‑type inserts accept this geometry; ensure the seat and clamp match the CPGT050204‑MM4 form. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating enhances heat resistance and wear performance, extending tool life and supporting consistent surface quality during extended production runs with the WSM20S grade. Is the MM4 chipbreaker suitable for interrupted cuts? The MM4 chipbreaker is engineered for reliable chip control in a range of feeds and can perform in intermittent cuts, provided the toolholder offers sufficient rigidity. Can this insert be used for light drilling operations? When mounted in suitable drilling or boring holders accepting CPGT forms, the insert can be applied to light drilling and reaming tasks that match its geometry and cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPGT050204-MP4 WPP20G T Wendeplatten - Walter Tools
Take advantage of the WPP20G grade and the MP4 chipbreaker to achieve stable chip formation, consistent surface finish and extended tool life for steel turning; order the CPGT050204-MP4 WPP20G insert directly via Metav Werkzeuge or consult our specialists for process matching. CPGT050204-MP4 WPP20G indexable turning insert — Tiger·tec Gold for steel (Walter Tools) CPGT050204-MP4 WPP20G is an indexable turning insert optimised for steel machining, combining the Tiger·tec Gold grade with a controlled-chip geometry for productive, repeatable turning operations. Tiger·tec Gold coated carbide for long life Designed for steel machining (ISO P) Rhombic 80° form with 0.4 mm corner radius MP4 chipbreaker for controlled chips Consistent performance for demanding steel operations The combination of the WPP20G grade and the Tiger·tec Gold technology is engineered to deliver wear resistance and predictable tool behaviour when machining steels (ISO P). The insert’s coated carbide substrate balances toughness and hardness to resist edge breakdown under the thermal and mechanical loads typical of steel turning. With a 11° free angle and rhombic 80° form, the geometry offers a compromise between cutting stability and accessibility in shoulder and profile turning. This results in reduced downtime and improved process reliability in serial production. Predictable chip control and improved surface quality A dedicated MP4 chipbreaker ensures chips are formed and evacuated consistently, lowering the risk of entanglement and improving process safety. The 0.4 mm corner radius provides edge strength for longer tool life while contributing to a finer surface finish on workpieces. These features together reduce secondary operations and rework, supporting a measurable increase in productivity and cost efficiency on steel components where dimensional accuracy and repeatable surface quality are required. Easy integration into existing tool systems and shop workflows The CPGT geometry and plate dimensions (plate size 05, thickness 02) mean the insert fits a wide range of standard toolholders, allowing straightforward replacement without retooling fixtures. The tolerance class G and the execution T reflect production consistency and dimensional control, simplifying inventory management and tool presetting. As an insert designed for industrial cutting tasks, it supports uninterrupted machining cycles and aids process planning thanks to its repeatable performance characteristics. For reliable, high-productivity steel turning with the Tiger·tec Gold grade, contact Metav Werkzeuge GmbH for ordering and technical advice — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: CPGT050204-MP4-WPP20G-WALTER Label: Drehwendeschneidplatte CPGT050204-MP4 WPP20G Walter Tools Product type: Indexable turning insert / Drehwendeschneidplatte Brand: Walter Tools Facts Grade: WPP20G Series: Tiger·tec Gold Free angle: 11° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 05 Plate thickness: 02 Tolerance class: G Chipbreaker: MP4 Special features Coated carbide grade (Tiger·tec Gold) Suitable for steel (ISO P) Execution: T Wendeplatte designation: CPGT050204-MP4 ISO designation: CPGT050204-MP4 WPP20G FAQ What materials is this insert suitable for? The CPGT050204-MP4 WPP20G insert is designed chiefly for steel machining (ISO P) and the WPP20G grade accommodates the thermal and chip-formation behaviour typical of unalloyed and alloyed steels. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker on this turning insert promotes stable chip formation and evacuation, which helps to avoid chip build-up and improves surface integrity during continuous turning. What does the 0.4 mm corner radius mean for the part finish? A 0.4 mm corner radius enhances edge strength for better tool life and contributes to improved surface finish, especially on external profiles and shoulders where a fine machined surface is required. Which toolholders accept this insert geometry? The CPGT form is a standard indexable turning geometry and the CPGT050204-MP4 designation fits common toolholder families specified for rhombic 80° inserts; toolholder compatibility should be verified against holder manufacturer data. What does tolerance class G indicate? Tolerance class G denotes the dimensional and geometric tolerance level applied during production, supporting consistent fit and predictable seating in standard toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
CPGT050204-X15 WAK15 Wendeplatten - Walter Tools
Take advantage of the WAK15 uncoated carbide grade and the rhombic 80° geometry to achieve clean chip formation when machining aluminium and other non‑ferrous metals; the 11° clearance and 0.4 mm corner radius support precise hole entry and reduced rework. Order the insert directly via Metav Werkzeuge or contact our consultants for application support. CPGT050204‑X15 WAK15 — drilling/reaming indexable insert, rhombic 80° | 11° clearance — Walter Tools The CPGT050204‑X15 WAK15 is a drilling and boring indexable insert engineered for high‑efficiency machining of aluminium and other non‑ferrous materials, combining a sharp cutting geometry with an uncoated cemented carbide grade. Uncoated solid carbide WAK15 grade Optimised for aluminium and non‑ferrous metals Rhombic 80° geometry for precise entry 11° clearance and 0.4 mm corner radius Reliable chip control and consistent results for non‑ferrous machining The insert’s geometry and grade deliver consistent chip formation when working with aluminium and similar alloys. As an uncoated cemented carbide grade, WAK15 provides a very sharp cutting edge that reduces material adhesion and built‑up edge — a common challenge with soft, ductile materials. The combination of the X15 chipformer and the rhombic 80° shape focuses on generating short, controllable chips and minimising downtime for chip removal, which supports higher machine utilisation and fewer interruptions in production. Geometry that improves hole quality and reduces secondary operations The rhombic 80° form with a 0.4 mm corner radius and 11° clearance helps to secure consistent hole entry and wall finish. This geometry translates into fewer burrs and less manual deburring after drilling or boring operations. By reducing the need for secondary finishing, the component flow is streamlined and cycle times are shortened — a clear efficiency gain for batch production and high‑mix environments. The insert’s definition of relief and corner rounding also supports repeatability across multiple tool changes. Material selection aimed at productivity and tool life Choosing an uncoated WAK15 grade means the cutting edge remains sharp and resistant to the adhesive tendencies of non‑ferrous alloys. While coated grades are beneficial for higher temperatures or abrasive materials, the WAK15 composition is tuned for low cutting resistance and stable cutting in soft metals, promoting longer tool life per cutting edge in these applications. The Walter N‑grade system identification underlines suitability for ISO group N materials, helping process planners match the insert to the correct workpiece family without lengthy trials. Integration into production and practical benefits for workshops The insert’s standardised ISO designation and compact dimensions make it straightforward to integrate into common holder systems and tool assemblies. This compatibility reduces set‑up time and simplifies inventory management. For production planners, the balance of precision, chip control, and the proven Walter manufacturing standards offers predictable performance and easier process qualification. Where repeatability and surface quality matter, this insert supports stable machining regimes and reduces scrap rates. For application advice, cutting data recommendations or to secure supply of the Walter Tools CPGT050204‑X15 WAK15 insert, contact Metav Werkzeuge for tailored support and fast processing — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: CPGT050204-X15-WAK15-WALTER ISO designation: CPGT050204-X15 WAK15 Product type: Drilling/reaming indexable insert Manufacturer: Walter Tools Facts Relief angle: 11° Corner radius: 0.4 mm Plate size: 05 Plate thickness: 02 Special features Grade: WAK15 Series: Walter N‑Sortensystem Chipbreaker: X15 Plate form: Rhombus 80° Execution: T Material designation: N Intended for: Aluminium and non‑ferrous metals (ISO N) FAQ Which materials are best suited for this insert? The CPGT050204‑X15 WAK15 insert is designed for aluminium and other non‑ferrous metals, following the ISO N classification and the Walter N‑Sortensystem recommendations. Why choose an uncoated WAK15 grade for aluminium? The uncoated WAK15 grade provides a very sharp cutting edge and low adhesion characteristics, which reduces built‑up edge and improves surface quality when machining soft, ductile alloys. How does the rhombic 80° geometry affect drilling performance? The rhombic 80° form supports controlled entry and stable drilling forces; combined with the 0.4 mm corner radius and 11° clearance, it helps to reduce burr formation and the need for secondary finishing. Can this insert be used with standard holders and drills? Yes — the ISO designation and plate dimensions of the CPGT050204‑X15 WAK15 permit integration into common indexable insert holders and tooling systems, simplifying tool changeover and inventory. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. The named brands are mentioned for explanation only; there is no affiliation between our company and the manufacturers. The offered item is an original, factory‑new product of the specified manufacturer.
CPGT050204-X15 WK1 T Wendeplatten - Walter Tools
Combine stable chip formation, precise geometry and economical performance for reliable drilling and boring operations; order the insert directly via Metav Werkzeuge or consult the team for application advice. CPGT050204-X15 WK1 Drilling/Boring Indexable Insert — Rhombus 80°, 11° clearance — Walter Tools A CPGT050204-X15 WK1 indexable insert designed for drilling and boring operations, offering versatile engagement and general machining suitability in an open Walter grade. Rhombus 80° geometry for flexible drilling 11° clearance angle for secure cutting X15 chipbreaker for stable chip control Uncoated carbide WK1 grade for general machining High repeatability from geometry and chip control The combination of a Rhombus 80° shape and the X15 chipbreaker ensures consistently controlled metal removal across interrupted and continuous cuts. The insert’s geometry promotes a steady entry angle and reduced vibration, which leads to improved repeatability in a production setting. For processes that require consistent hole quality, the insert’s design contributes to fewer rejects and lower rework rates, supporting a more economical machining cycle. Secure cutting performance through relief and corner radius An 11° clearance and a 0.4 mm corner radius balance edge strength with cutting accessibility. The clearance angle reduces rubbing at the flank, while the corner radius increases edge robustness, making this insert suitable where slightly heavier engagement or marginal chip evacuation occurs. These design choices aid tool life by distributing cutting forces, translating technical geometry into a clear benefit: longer tool life and fewer tool changes during batch production. Material and grade guidance for industrial use The insert is supplied in the WK1 Walter grade, an uncoated carbide solution intended for a broad range of general machining tasks; material specifics are catalogue-dependent. The open-series designation emphasises that material suitability should be checked against the product matrix before final selection. This advisory helps ensure the chosen insert matches the workpiece material and cutting parameters, thereby optimising process security and surface quality. Practical advantages in workshop integration As an indexable insert for drilling and boring applications, the shape code and size identifiers enable straightforward replacement and inventory control. The coded dimensions (plate size and thickness) support compatibility with standard insert holders and regrind cycles where applicable. Combined with Walter Tools’ established manufacturing standards, the component supports reliable performance and predictable tool-change planning, contributing to reduced downtime and smoother production throughput. Contact Metav Werkzeuge for tailored application advice on Walter Tools CPGT050204-X15 WK1 inserts and to secure the most appropriate configuration for efficient, repeatable drilling performance Technical data Article number: CPGT050204-X15-WK1-WALTER Designation: CPGT050204-X15 WK1 Product type: Drilling/Boring indexable insert Manufacturer: Walter Tools Execution: T Tolerance class: G Dimensions & core technical data Relief / clearance angle: 11° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 05 Plate thickness: 02 Chipbreaker: X15 Special features Grade / series: WK1 — Walter Schneidstoffsorte - Serie offen Coating / material: uncoated carbide (catalogue-dependent) Application note: Check product matrix for material suitability Intended use: drilling and boring applications FAQ What materials is this insert suitable for? The CPGT050204-X15 WK1 is supplied in an open WK1 grade (uncoated carbide); material suitability must be verified against the product matrix to match the intended workpiece. How does the X15 chipbreaker affect machining? The X15 chipbreaker promotes stable chip control, improving evacuation and reducing the risk of chip-induced tool damage during drilling and boring operations with the CPGT050204-X15 WK1 insert. Which geometry advantages does the Rhombus 80° offer? A Rhombus 80° geometry provides flexible engagement angles for drilling and boring, enabling use in various holder designs and contributing to consistent hole quality. Is the corner radius important for tool life? Yes — the 0.4 mm corner radius increases edge strength and helps distribute cutting forces, which supports longer edge life and more reliable performance in production. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected brand names and trademarks are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory-new product of Walter Tools.
CPGT050204-X15 WTP35 WTP35 Wendeplatten - Walter Tools
Benefit from a combination of WTP35 coated carbide, a rhombic 80° geometry and a 0.4 mm corner radius for stable cutting and long tool life in drilling and boring operations; order the insert via Metav Werkzeuge or consult our specialists for an application-specific recommendation. CPGT050204-X15 CPGT050204-X15 WTP35 – Drill/Bore indexable insert, Rhombic 80°, corner radius 0.4 (Walter Tools) A CPGT050204-X15 WTP35 indexable insert for drilling and boring applications, designed with a rhombic 80° profile and an 11° clearance angle to support precise chip control and repeatable performance. Coated carbide grade WTP35 Rhombic 80° geometry for versatility 11° clearance angle for reduced rubbing Chipbreaker X15 for controlled chips Consistent productivity for drilling and boring operations The coated carbide WTP35 grade delivers a balance of wear resistance and edge robustness that supports continuous machining cycles. Combined with the chipbreaker X15, the insert promotes predictable chip formation, which reduces interruptions for chip evacuation and minimises tool-change frequency. This leads to higher uptime on drilling and boring centres and a more efficient production flow when paired with suitable toolholders. Geometry engineered for repeatable accuracy The rhombic 80° profile and corner radius 0.4 mm create a reliable contact geometry that stabilises the cut and reduces vibration at the cutter edge. The 11° clearance angle keeps the flank from rubbing against the workpiece, lowering heat build-up and improving surface finish. These geometric traits make the insert well suited to operations where dimensional stability and repeatability are essential. Grade and series details to match process demands Delivered in the open series Walter Schneidstoffsorte - Serie offen, the insert is specified as a coated carbide type; suitability for specific workpiece materials should be checked against the product matrix. The designation WTP35 indicates a coated cemented carbide class engineered for general productivity; selection by cutting conditions and material group ensures the best trade-off between tool life and machining performance. Compatibility, handling and shop-floor benefits The insert’s size code and thickness permit quick identification in assortments: the compact format simplifies stocking and replacement. With a tolerance class G, the component supports consistent fitting in compatible holders and straightforward indexation. Using standard indexable tooling systems with the correct clamp geometry ensures safe mounting and fast changeover, reducing non-productive time and supporting predictable cycle times. Contact Metav Werkzeuge for tailor-made selection advice on Walter Tools WTP35 inserts and to discuss the ideal toolholder combination for specific drilling or boring processes — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical Data Article number: CPGT050204-X15-WTP35-WALTER Label: Bohr-/Aufbohrwendeschneidplatte CPGT050204-X15 WTP35 Walter Tools SKU: CP G T 05 02 04 - X15 - WTP35 - WALTER Core data Clearance angle: 11° Corner radius: 0.4 mm Insert shape: Rhombic 80° Size code: 05 Thickness code: 02 Tolerance class: G Features & materials Grade: WTP35 (coated carbide) Chipbreaker: X15 Series: Walter Schneidstoffsorte - Serie offen Execution: T Material specification: Katalogabhängig Product type: Drill/Bore indexable insert FAQ What materials is this insert intended for? The WTP35 grade is a coated carbide class; suitability for specific materials should be confirmed with the product matrix for the CPGT050204-X15 WTP35 insert before application. Which geometry advantage does the rhombic 80° offer? The rhombic 80° form on this indexable insert provides versatility for drilling and boring tasks, offering a compromise between entry robustness and accessibility for interrupted cuts. How does the chipbreaker X15 affect performance? The chipbreaker X15 on the CPGT050204-X15 WTP35 insert promotes controlled chip formation, reducing the risk of long, tangled chips and contributing to steady machining cycles. Is the insert suitable for high-precision finishing passes? With a 0.4 mm corner radius and an 11° clearance angle, the insert supports improved surface quality and dimensional stability when programmed and fixtured appropriately. What should be checked before selecting this insert for a job? Confirm the workpiece material group and cutting parameters against the Walter Tools product matrix to ensure the CPGT050204-X15 WTP35 grade matches the process for the desired balance of life and productivity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com