CPGT050204-X15 WXM15 Wendeplatten - Walter Tools
Take advantage of a sharp, uncoated carbide grade tailored for non‑ferrous metals, combined with a robust Rhombus 80° geometry and a modest corner radius for durable cutting performance; order directly via Metav Werkzeuge or consult the technical team for application advice. CPGT050204-X15 WXM15 drilling/reaming indexable insert — Rhombus 80°, 11° clearance — Walter Tools CPGT050204-X15 WXM15 is an indexable insert engineered for drilling and reaming operations in non‑ferrous materials, offering a focused geometry for stable cutting and reliable chip control. Uncoated carbide for sharp cutting edges Optimised for non‑ferrous metals Rhombus 80° geometry for flexibility 11° clearance reduces rubbing and heat High productivity for soft metals and light alloys The insert delivers consistent material removal rates when machining aluminium, copper and Messing thanks to its uncoated carbide grade and a geometry optimised to prevent built‑up edge. The uncoated substrate preserves a very sharp cutting edge, which translates into lower cutting forces and improved cycle times in high‑volume drilling and reaming tasks. For shops targeting efficient throughput, the combination of edge integrity and a chipformer designed for light alloys supports predictable process windows and reduced secondary finishing. Geometry that balances versatility and surface finish A Rhombus 80° plate shape provides access to a broad range of bore sizes and angles, while the corner radius 0.4 mm enhances edge strength without compromising the ability to produce a fine surface. The X15 chipbreaker promotes short, controllable chips in non‑ferrous applications, reducing the risk of entanglement and improving thermal behaviour at the cutting zone. These design choices result in improved component quality and fewer interruptions for chip clearing during sustained runs. Designation, size and workshop compatibility The ISO designation CPGT050204‑X15 WXM15 identifies the insert dimensions and the WXM15 uncoated grade, intended specifically for the N material group (non‑ferrous metals). Plate size 05 with thickness 02 and a clearance angle of 11° means the insert integrates with standard drilling/reaming toolholders that accept this form factor. The tolerance class G and execution T indicate consistent manufacturing precision suited for repeatable machining cycles. This clarity simplifies tooling decisions in mixed‑workshop environments. Economic value through application focus By concentrating on non‑ferrous machining, the insert reduces the need for compromise coatings or overly robust grades that are unnecessary for soft metals, delivering a cost‑effective solution with dependable process stability. The Walter N‑series lineage ensures compatibility across a range of tool holders and supports straightforward inventory management. For manufacturers seeking a balance of performance, life and price‑efficiency in aluminium and copper machining, this insert provides a pragmatic choice. For application support or to procure Walter Tools inserts such as the CPGT050204‑X15 WXM15, contact Metav Werkzeuge for tailored advice and supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: CPGT050204-X15-WXM15-WALTER Article label: Bohr-/Aufbohrwendeschneidplatte CPGT050204-X15 WXM15 Walter Tools Product type: drilling/reaming indexable insert Manufacturer: Walter Tools Series/grade: Walter N‑Sortensystem / WXM15 ISO designation: CPGT050204-X15 WXM15 Execution: T Tolerance class: G Numbers / Core technical data Clearance angle: 11° Corner radius: 0.4 mm Plate size: 05 Plate thickness: 02 Designs / Special features Uncoated carbide grade WXM15 Chipbreaker: X15 Plate form: Rhombus 80° Target material group: non‑ferrous metals (N) Intended use: drilling and reaming FAQ What materials is this insert suitable for? This insert is formulated for the N material group; it is suitable for machining aluminium, copper and Messing and similar non‑ferrous alloys with the WXM15 uncoated carbide grade. How does the Rhombus 80° shape affect application scope? The Rhombus 80° geometry allows the insert to be used across a variety of bore and reaming toolholders, offering good access and versatility for different hole diameters while maintaining a stable cutting edge. What benefits does the X15 chipbreaker provide? The X15 chipbreaker produces short, controlled chips in non‑ferrous machining, improving chip evacuation and reducing the risk of chip interference during prolonged drilling or reaming cycles. Is the CPGT050204‑X15 WXM15 compatible with standard toolholders? Yes, the ISO designation CPGT050204‑X15 WXM15 corresponds to standard dimensions and can be fitted in holders that accept this insert form, plate size 05 and thickness 02. What performance advantages does the WXM15 grade offer? WXM15 is an uncoated carbide grade optimised for sharp edges and low adhesion, delivering reliable cutting for soft materials and reducing secondary finishing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original factory‑new merchandise of the manufacturer.
CPGT050204-X25 WK1 T Wendeplatten - Walter Tools
Combining an uncoated carbide grade (WK1) with a Rhombus 80° form and a 0.4 mm corner radius, this insert delivers predictable chip formation and stable cutting performance for drilling and bore-enlargement operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CPGT050204-X25 WK1 — Drill/Boring Indexable Insert by Walter Tools, Rhombus 80° / 11° clearance CPGT050204-X25 WK1 is an indexable cutting insert for drilling and bore-enlargement applications, designed to provide stable chip control and consistent hole quality in general machining. Uncoated carbide grade WK1 Rhombus 80° insert geometry 0.4 mm corner radius 11° clearance angle Consistent chip control for higher process reliability The uncoated carbide composition of the insert, specified as WK1, promotes stable behaviour under varied machining conditions. Thanks to the chipbreaker X25, the insert reduces long, stringy chips and supports regular chip segmentation, which simplifies chip evacuation and reduces the risk of interruptions. This results in fewer machine stops and a more predictable cycle time, supporting continuous production where reproducible performance matters. Geometry engineered for machining accuracy and tool life The Rhombus 80° form combined with an 11° clearance angle and a 0.4 mm corner radius balances cutting strength and dimensional control. The geometry delivers improved edge support for bore-facing and enlargement tasks while the modest corner radius helps maintain hole tolerance without excessive cutting forces. The clearances and shape work together to extend edge life under moderate loads, improving overall machining economy and reducing insert change frequency. Practical fitment and material guidance for reliable selection The insert is offered in the catalogue-dependent material variants and sits in the Walter cutting grade series – open; users should verify the grade match for specific workpiece materials via the product matrix. The insert’s designation indicates form and chipbreaker compatibility with standard drilling and boring toolholders; tolerance class G denotes consistent manufacturing quality. For multi-material shops, this insert is suitable where uncoated carbide performance is preferred and toolholders accept Rhombic 80° indexable inserts. For demanding bore operations, request the CPGT050204-X25 WK1 from Metav Werkzeuge for reliable, repeatable results — contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 for technical clarification and ordering assistance Technical Data SKU: CPGT050204-X25-WK1-WALTER Designation: CPGT050204-X25 WK1 Manufacturer: Walter Tools Type: Drill/boring indexable insert Core specifications Clearance angle: 11° Corner radius: 0.4 mm Shape: Rhombus 80° Size code: 05 Thickness code: 02 Chipbreaker: X25 Tolerance class: G Materials & features Grade: uncoated carbide (WK1) Series: Walter cutting grade series – open Material info: catalogue-dependent Execution code: T Intended use: drilling and bore enlargement FAQ What cutting grade is WK1 and what does it mean for machining? WK1 is an uncoated carbide grade from Walter Tools; the grade in the CPGT050204-X25 WK1 insert offers stable edge behaviour suitable for general-purpose drilling and bore-enlargement where coated grades are not required. Which hole-making operations suit this insert? The insert is designed for drilling and bore-enlargement operations; its Rhombus 80° geometry and chipbreaker X25 make it appropriate for controlled chip formation during hole cutting and reaming-adjacent passes. How should the corner radius and clearance angle be interpreted for process setup? The 0.4 mm corner radius provides a compromise between edge strength and dimensional accuracy, while the 11° clearance angle reduces rubbing on the flank, together helping to maintain hole tolerance and extend edge life. Is this insert compatible with standard drill and boring holders? Yes, the designation CPGT050204-X25 indicates an indexable insert form and chipbreaker suited to common drill and boring toolholders that accept Rhombic 80° inserts; check the holder’s insert seat for size code 05 and thickness code 02. What documentation should be consulted before selection? Refer to the Walter Tools product matrix for the CPGT050204-X25 WK1 to confirm workpiece material suitability and recommended cutting parameters; the insert’s series information notes that material variants are catalogue-dependent. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
CPGT050204-X5 WAK15 Wendeplatten - Walter Tools
Take advantage of a dedicated grade for non‑ferrous machining combined with a stable geometry for reproducible hole quality; the uncoated WAK15 carbide ensures sharp cutting edges and reliable chip control in aluminium applications. Order directly via Metav Werkzeuge or consult our specialists for selection and delivery. CPGT050204-X5 WAK15 — drilling/boring indexable insert by Walter Tools (Rhombic 80°, 0.4 mm radius) CPGT050204-X5 WAK15 is an indexable insert designed for drilling and boring in aluminium and other non‑ferrous metals, offering a precise cutting geometry and a chipbreaker matched to soft metal machining. WAK15 uncoated carbide for aluminium machining Rhombic 80° insert form 0.4 mm corner radius for finishing 11° clearance angle for smooth cutting X5 chipbreaker for controlled chips Consistent, sharp grade for non‑ferrous materials The WAK15 grade is an uncoated cemented carbide developed for aluminium and other non‑ferrous alloys, providing consistently sharp cutting edges that reduce material adhesion and minimise burr formation. This results in improved hole surface quality and fewer rework cycles. For shops processing high volumes of soft metals, the grade’s geometry supports stable cutting conditions and predictable tool life, helping to keep cycle times low and scrap rates down. Geometry tailored to precise hole finishing The rhombic 80° form combined with a 0.4 mm corner radius and an 11° clearance angle gives a balance between edge strength and cutting precision. The acute rhombic shape enables accurate entry and stable guidance in bore processes, while the small corner radius promotes fine surface finishes on the bore wall. These geometric choices mean fewer passes are required to reach tolerance, improving throughput without sacrificing finish quality. Reliable chip control and process stability Equipped with the X5 chipbreaker, the insert is engineered to break and evacuate chips efficiently when machining aluminium and similar materials. Better chip control reduces the risk of re-cutting and tool crashes, contributing to higher process reliability and less machine downtime. The insert’s placement within the Walter N‑grade system signals an application focus on non‑ferrous machining, making it straightforward to select matching grades for related operations. Practical fit for workshop workflows This insert is suitable for drilling and boring applications where sharpness and clean chip formation are priorities. Its standard size code and thickness enable easy toolholder compatibility and simple stocking alongside other indexable cutting tools. For shops moving between different non‑ferrous alloys, the combination of grade and chipbreaker offers versatility while retaining the advantages of a purpose‑built insert. For precise aluminium and non‑ferrous machining with Walter Tools’ CPGT050204‑X5 WAK15, contact Metav Werkzeuge for advice on holder compatibility and availability Technical data Article number: CPGT050204-X5-WAK15-WALTER Designation: CPGT050204-X5 WAK15 Manufacturer: Walter Tools Product type: drilling/boring indexable insert Facts Clearance angle: 11° Corner radius: 0.4 mm Insert form: Rhombus 80° Insert size: 05 Insert thickness: 02 Chipbreaker: X5 Tolerance class: G Materials and special features Grade: WAK15 Grade family: Walter N‑grade system Coating: uncoated cemented carbide Suitable for aluminium and non‑ferrous metals Application: drilling and boring inserts FAQ What materials is this insert intended for? This insert is designed for aluminium and other non‑ferrous metals; the WAK15 grade is optimised for these materials and reduces material adhesion. What does the X5 chipbreaker do? The X5 chipbreaker is shaped to control and break chips when machining soft, ductile materials, improving evacuation and reducing re‑cutting. Can this insert be used for finishing holes? Yes, the 0.4 mm corner radius and rhombic 80° form support fine surface finishes in bore operations with consistent dimensional results. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is original factory‑new goods of the manufacturer.
CPGT050204-X5 WTP35 X5 Wendeplatten - Walter Tools
Benefit from the combination of a coated carbide grade for reliable wear resistance, the X5 chipbreaker for controlled chip formation, and the stable rhombus 80° geometry to keep cycles consistent; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. CPGT050204-X5 WTP35 — Drilling/Boring indexable insert, Rhombus 80°, Walter Tools CPGT050204-X5 WTP35 is a coated carbide insert designed for drilling and boring applications where consistent chip control and repeatable hole quality are required. Coated carbide grade WTP35 for robust performance Rhombus 80° insert for stable cutting geometry 11° relief angle and 0.4 mm corner radius for precision Higher productivity through optimised chip control The CPGT050204-X5 WTP35 insert is built on a coated carbide substrate and uses the X5 chipbreaker to manage chips effectively during drilling and boring. A dedicated chipbreaker reduces the risk of long, tangled swarf and helps maintain continuous cutting at higher feed rates, which translates directly into shorter cycle times and improved throughput. For shops aiming to raise output without sacrificing tool life, the controlled chip formation delivers a clear, measurable efficiency gain while reducing interruptions for machine cleaning. Precision geometry for consistent hole quality A carefully chosen geometry — rhombus 80° with an 11° relief angle and 0.4 mm corner radius — balances edge strength and cutting action. The relief angle helps prevent rubbing at the flank, lowering heat build-up and reducing workhardening on the bore surface, while the corner radius increases edge durability and improves the surface finish of each hole. These features make the insert suitable where repeatability and dimensional stability are priorities, such as in serial production or when tight tolerances are demanded. Practical system integration and economical tool life The insert’s form and dimensions (size 05, thickness 02) permit straightforward integration into matching toolholders, enabling fast index changes and minimal downtime. The grade WTP35, described as a coated cemented carbide in the Walter series, is optimised for a broad range of general machining tasks — however, specific workpiece suitability should be verified against the product matrix to ensure optimal material match. The result is reliable performance, lower tooling consumption over time and a favourable cost-performance ratio that supports continuous production demands. For application checks or to confirm whether the Walter Tools CPGT050204-X5 WTP35 is the right option for a given task, contact Metav Werkzeuge by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to receive targeted technical advice and ordering information. Technical data Article number: CPGT050204-X5-WTP35-WALTER Description: Bohr-/Aufbohrwendeschneidplatte CPGT050204-X5 WTP35 Brand: Walter Tools Specifications Relief angle: 11° Corner radius: 0.4 mm Insert shape: Rhombus 80° Insert size: 05 Plate thickness: 02 Tolerance class: G Features Chipbreaker: X5 Coating: Katalogabhängig Series: Walter Schneidstoffsorte - Serie offen Execution: T ISO designation: CPGT050204-X5 WTP35 Material: Katalogabhängig FAQ What materials is this insert suitable for? Material suitability depends on the specific grade matrix; the WTP35 grade in the CPGT050204-X5 WTP35 is a coated cemented carbide intended for general machining—please check the product matrix to confirm compatibility with the intended workpiece material. How does the X5 chipbreaker affect machining stability? The X5 chipbreaker is designed to generate short, controllable chips during drilling and boring, which improves machining stability and reduces swarf-related interruptions in automated or high-volume processes. Can the rhombus 80° geometry be used for both drilling and boring? Yes, the rhombus 80° form provides a stable cutting edge suitable for rotary holemaking and light boring operations where edge strength and repeatability are required. What is the effect of the 0.4 mm corner radius on tool life? A 0.4 mm corner radius increases the cutting-edge strength, helping to spread cutting forces and typically leading to improved tool life and better surface integrity compared with a sharper corner. Is the coating specified for this insert fixed? The coating is listed as catalogue-dependent; for precise coating details and the best match to specific applications, refer to the Walter product documentation or consult Metav Werkzeuge. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The item offered is original, factory-new goods from the manufacturer.
CPGT050204-X5 WXM15 Wendeplatten - Walter Tools
Take advantage of the precise geometry and material pairing of this insert to improve chip control and cycle stability in non‑ferrous machining; benefit from the robust corner radius and the Walter N‑Series system for consistent, repeatable results. Order directly via Metav Werkzeuge or consult the Metav team for application guidance. CPGT050204-X5 WXM15 – Indexable drilling/boring insert for non‑ferrous metals, Walter Tools CPGT050204-X5 WXM15 is an indexable drilling and boring insert developed for efficient machining of non‑ferrous metals such as aluminium, copper and brass. Rhombic 80° form for versatile drilling 11° clearance angle for low cutting forces 0.4 mm corner radius for robust edge life Uncoated carbide grade WXM15 for NE‑metals Reliable performance for non‑ferrous materials The insert combines a Rhombic 80° geometry with a dedicated chipbreaker to deliver stable cutting in non‑ferrous applications. The uncoated WXM15 carbide grade is tuned for aluminium, copper and brass, offering a balance between sharpness and edge life. The specified 11° clearance angle reduces rubbing and lowers cutting forces, which supports higher feed rates and more consistent hole quality. For shops seeking predictable results in aluminium alloys and similar materials, this design improves cycle stability and reduces the need for secondary finishing. Extended edge life through optimised edge design A 0.4 mm corner radius and the robust insert form increase resistance to chipping during interrupted cuts and drilling depths. The combination of the corner radius and the X5 chipbreaker promotes controlled chip formation and evacuation, minimising material build‑up on the cutting edge. This results in longer effective tool life and fewer insert changes per shift. The underlying principles are straightforward: smoother chip flow and a stable cutting edge reduce thermal and mechanical stress, translating into fewer unplanned tool interventions and more productive machining time. System compatibility and practical application advice Designed for the Walter N‑Series System, the insert integrates into standard Walter drilling and boring toolholders with predictable seating and indexing. Selection is simplified by the clear ISO designation and size coding, enabling quick matching to existing tool bodies. For application planning, consider feeds and speeds optimised for non‑ferrous alloys and ensure adequate coolant or air blast for efficient chip removal. For customers seeking tailored parameters, Metav Werkzeuge provides machining guidance and parameter suggestions based on component material and desired surface finish. Contact Metav Werkzeuge for tailored application advice on Walter Tools WXM15 inserts and for recommendations on drill holders and cutting parameters — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: CPGT050204-X5-WXM15-WALTER Designation: CPGT050204-X5 WXM15 Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte Specifications Geometry: Rhombus 80° Clearance angle: 11° Corner radius: 0.4 mm Thickness code: 02 Size code: 05 Chipbreaker: X5 Tolerance class: G Features Series: Walter N‑Series System Grade: Uncoated carbide WXM15 Execution: T Application group: Non‑ferrous metals (NE) Suitable for machining: Aluminium, copper, brass FAQ Which materials are recommended for this insert? This insert is intended for non‑ferrous metals; the CPGT050204‑X5 WXM15 performs best in aluminium, copper and brass and is classified for ISO group N. What does the WXM15 grade indicate? WXM15 denotes an uncoated carbide grade optimised for sharp cutting edges and good performance in NE‑metals; the grade is part of the Walter N‑Series philosophy for non‑ferrous machining. How does the X5 chipbreaker affect machining? The X5 chipbreaker promotes short, controllable chips and supports reliable evacuation during drilling and boring operations, reducing the risk of built‑up edge and improving surface quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and the trademark owners.
CPGT050204M-FP2 WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, precise WEP10C cermet geometry and effective chip control for stable, productive turning operations. Order directly via Metav Werkzeuge or consult our experts for application advice. CPGT050204M-FP2 WEP10C – Rhombus 80° turning and boring insert (Walter Cermet, FP2) The CPGT050204M-FP2 WEP10C is an indexable turning and boring insert designed for stable chip formation and consistent surface quality in general turning applications. Walter Cermet grade WEP10C FP2 chipbreaker for controlled chips Rhombus 80° geometry for versatile turning 11° relief angle for reduced cutting forces Reliable performance for continuous production The insert combines the WEP10C cermet grade with a precise Rhombus 80° geometry to deliver consistent cutting behaviour across series production. The cermet composition provides a high degree of hardness and thermal stability, which supports longer tool life and predictable wear patterns; this yields fewer machine stops and more consistent part quality. The 11° relief angle reduces rubbing and cutting forces, helping to maintain dimensional accuracy even under varying feed rates. Such factors translate directly into improved uptime and predictable production output. Controlled chip formation and improved surface finish Equipped with an FP2 chipbreaker, the insert channels chips into predictable forms that ease evacuation and reduce the risk of surface damage. The 0.4 mm corner radius balances edge strength with the ability to produce a fine finish, making the insert suitable for both roughing and light finishing passes where surface integrity matters. For those less familiar with cermet technology: cermet is a ceramic–metal composite that combines hardness with toughness and is particularly effective for finishing operations on a range of materials. The resulting combination yields reliable surface finishes and reduced rework. Application guidance and selection benefits The insert is part of the Walter Cermet series and carries a tolerance class G, indicating close dimensional conformity for repeatable clamping and indexing. The FP2 chipbreaker and the insert's geometry make it suitable for conventional turning tasks where controlled chips and good surface quality are priorities. When selecting grades and cutting data, consider material compatibility and check the manufacturer’s product matrix for the best match. The clear geometry and standardised form facilitate easy tool board management and minimise setup uncertainty, supporting efficient process planning. Contact Metav Werkzeuge for tailored application support on Walter Tools inserts and to receive machining parameter recommendations specific to the CPGT050204M-FP2 WEP10C Technical data Article number: CPGT050204M-FP2-WEP10C-WALTER Designation: CPGT050204M-FP2 WEP10C Manufacturer: Walter Tools Facts Relief angle: 11° Corner radius: 0.4 Plate shape: Rhombus 80° Plate size: 05 Plate thickness: 02 Chipbreaker: FP2 Tolerance class: G Special features Grade: WEP10C (cermet) Series: Walter Cermet Execution: T Material: Katalogabhängig FAQ What materials is this insert suitable for? The insert CPGT050204M-FP2 WEP10C is a cermet grade designed for a broad range of turning tasks; suitability should be verified against the Walter Cermet product matrix for the specific workpiece material. How does the FP2 chipbreaker help in production? The FP2 chipbreaker on the CPGT050204M-FP2 WEP10C shapes chips into controlled forms, improving evacuation and reducing the risk of surface damage during turning. Which applications are ideal for the Rhombus 80° geometry? Rhombus 80° geometry is versatile for general turning and boring operations, providing a good balance between cutting edge strength and access to different contour features when using the CPGT050204M-FP2 WEP10C insert. What does the WEP10C designation mean? WEP10C denotes the Walter cermet grade used for the insert; it indicates a cermet composition optimised for predictable wear and good finishing characteristics in the Walter Cermet series. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned manufacturers. The offered item is original, brand-new merchandise from the respective manufacturer.
CPGT060201-MM4 WSM01 MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, a WSM01 grade geared to stainless and heat‑resistant alloys, and a controlled chipforming geometry for reliable, productive machining. Order the insert directly via Metav Werkzeuge or consult our technical team for application guidance. CPGT060201-MM4 WSM01 indexable insert — Tiger‑tec Silver, for stainless and superalloys, Walter Tools CPGT060201-MM4 WSM01 is an indexable cutting insert designed for drilling and turning applications where materials such as stainless steels and heat‑resistant superalloys demand a robust, heat‑resistant grade Tiger‑tec Silver coated carbide grade WSM01 Optimised for stainless and superalloys Rhombic 80° insert with 0.1 mm corner radius MM4 chipbreaker for controlled chip formation 11° clearance angle, compact 06 size Predictable cutting performance with a heat‑resistant grade The combination of the Tiger‑tec Silver coating and the WSM01 carbide grade delivers a high degree of thermal resistance and edge stability when machining stainless steels and superalloys. This means fewer unplanned interruptions and a more consistent cycle time. The coated carbide composition supports stable chip control under elevated temperatures, reducing the risk of built‑up edge and improving tool life compared with uncoated alternatives. Geometry designed for reliable chip formation and surface quality The MM4 chipbreaker and the rhombic 80° shape are engineered to produce short, controllable chips in materials that are prone to stringing or poor chip evacuation. The small 0.1 mm corner radius combined with an 11° clearance angle helps to maintain a sharp cutting edge while reducing cutting forces, which in turn contributes to a consistent surface finish and minimised rework on the workpiece. Versatility for demanding machining tasks This insert is particularly suitable where a single tooling solution must cope with a range of difficult materials. Classified for processing both stainless steels and heat‑resistant alloys, the component supports workshops that require flexibility without compromising process reliability. The compact 06 size and standard thickness code provide compatibility with many common toolholders, streamlining inventory and changeover times. Process benefits that support productivity and cost control Using a grade optimised for heat and wear resistance results in longer intervals between indexings and fewer tool changes, directly affecting productivity metrics. The design focuses on stable cutting edges and predictable wear patterns: benefits that translate into improved machine uptime and a more favourable cost per part in series production. For applications requiring higher process security, this insert offers a pragmatic balance of resistance and edge life. For application advice or to request the CPGT060201-MM4 WSM01 Tiger‑tec Silver inserts from Walter Tools, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will support specification and ordering. Technical Data Article number: CPGT060201-MM4-WSM01-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CPGT060201-MM4 WSM01 Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Product type: Indexable insert for drilling and turning Numbers / Core technical data Clearance angle: 11° Corner radius: 0.1 mm Insert shape: Rhombic 80° Insert size code: 06 Thickness code: 02 Special features / Designs Coating: Tiger‑tec Silver Carbide: coated carbide grade WSM01 Chipbreaker: MM4 Execution code: T Tolerance class: G Material suitability: stainless steels (ISO group M) Material suitability: heat‑resistant superalloys and titanium (ISO group S) FAQ What materials is this insert best suited for? The CPGT060201-MM4 WSM01 insert from Walter Tools is optimised for stainless steels and heat‑resistant superalloys (ISO groups M and S), providing thermal resistance and stable cutting behaviour for these challenging materials. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker promotes controlled chip formation and easier evacuation; with the Tiger‑tec Silver coating and the rhombic geometry, the insert reduces stringing and improves surface consistency during cutting. Is this insert compatible with standard 80° rhombic toolholders? Yes, the rhombic 80° shape and the 06 size code make the insert compatible with a wide range of standard toolholders designed for 80° indexable inserts. What advantages does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WSM01 grade enhances heat resistance and wear protection, extending edge life and maintaining process stability during prolonged machining of tough alloys. Can this insert be used for finishing and semi‑finishing operations? With its 0.1 mm corner radius and stable cutting edge geometry, the insert is suitable for many finishing and semi‑finishing tasks where controlled cutting forces and good surface quality are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPGT060202-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating, the WSM01 grade and the precise Rhombic 80° geometry to achieve stable cutting edges and reliable chip control in demanding stainless steel and superalloy applications — order the insert directly via Metav Werkzeuge or consult its specialists for tailored cutting data. CPGT060202-MM4 WSM01 — Indexable insert for drilling/boring and turning (Tiger‑tec Silver, Rhombic 80°, 11°) by Walter Tools The CPGT060202-MM4 WSM01 is an indexable insert engineered for machining stainless steels and heat‑resistant superalloys in drilling, boring and light turning operations. Tiger‑tec Silver coating for wear resistance WSM01 grade for stainless steel and superalloys Rhombic 80° form with 0.2 mm corner radius 11° relief and MM4 chipbreaker for stable chips High‑performance grade for demanding materials The combination of the WSM01 carbide grade and Tiger‑tec Silver coating delivers a balance of thermal stability and edge robustness suited to difficult‑to‑cut materials. Designed for rostfreier Stahl (stainless steel) and heat‑resistant alloys, this grade supports secure chip formation and reduced tendency to build up on the cutting edge. The coated hardmetal substrate extends tool life under elevated temperatures and maintains dimensional accuracy over longer production runs, lowering the cost per finished part and improving process reliability. Precision geometry for consistent surface quality The insert’s Rhombic 80° shape and a small 0.2 mm corner radius produce predictable cutting engagement and allow controlled contact conditions in the toolholder. An 11° clearance angle reduces rubbing and heat transfer into the workpiece, which helps to preserve surface integrity when machining tough materials. The integrated MM4 chipbreaker is tuned for stable chip segmentation in the specified material groups, promoting uninterrupted operation and consistent workpiece finish without frequent manual intervention. Practical benefits and application guidance Adopting this indexable design brings measurable process advantages: improved tool life, fewer quality reworks and more stable cycle times. The component is compatible with conventional insert clamping systems and is particularly effective for semi‑finishing and finishing passes where edge stability and chip control are decisive. For best results, select cutting parameters that reflect the workpiece material group (M for stainless steels, S for superalloys and titanium) and monitor tool wear to optimise component throughput and scrap reduction. Contact Metav Werkzeuge for customised cutting data, toolholder recommendations and to discuss how the Walter Tools Tiger‑tec Silver WSM01 insert can increase productivity in specific machining tasks. Technical data Article number: CPGT060202-MM4-WSM01-WALTER Designation: CPGT060202-MM4 Product type: Indexable insert for drilling/boring and turning Manufacturer: Walter Tools Facts Clearance angle: 11° Corner radius: 0.2 mm Insert form: Rhombic 80° Insert size code: 06 Thickness code: 02 Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: MM4 Material suitability: rostfreier Stahl (M), heat‑resistant superalloys and titanium (S) Application scope: drilling, boring, light turning tasks FAQ Which materials is this insert designed to machine? The CPGT060202‑MM4 WSM01 from Walter Tools is specified for machining M (stainless steels) and S (heat‑resistant superalloys and titanium) materials according to ISO groupings. What are the key geometric characteristics of the insert? The insert features a Rhombic 80° form, a 0.2 mm corner radius and an 11° clearance angle; it carries the MM4 chipbreaker for improved chip control. What does the Tiger‑tec Silver coating provide? Tiger‑tec Silver coating on the WSM01 grade enhances wear resistance and thermal stability, helping to maintain a reliable cutting edge and longer tool life in high‑temperature conditions. Is the insert suitable for finishing or roughing operations? The geometry and chipbreaker are optimised for stable cutting and are commonly used for semi‑finishing and finishing in difficult materials; the exact suitability depends on cutting parameters and machine capability. Can the insert be reground or refurbished? Regrinding is application dependent; consult process data and the tool’s service guidelines to assess reconditioning potential for the CPGT060202‑MM4 WSM01. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mark names and protected designations are mentioned for explanation purposes only. There is no affiliation between our company and the named brands. The offered article is original factory‑new goods of the manufacturer.
CPGT060204-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver grade and the MK4 chipbreaker to secure consistent tool life and stable chip control when machining abrasive cast iron; order the insert directly via Metav Werkzeuge or request application advice from their consultants. CPGT060204-MK4 WKK20S indexable turning insert — Tiger‑tec Silver, for cast iron (Walter Tools) The CPGT060204-MK4 WKK20S is an indexable turning insert engineered for productive, repeatable machining of cast iron components, combining a wear‑resistant grade with a geometry tuned for stable cutting. Tiger‑tec Silver coating for enhanced wear resistance Optimised MK4 chipbreaker for stable chip control 80° rhombic geometry with 11° clearance angle Radius 0.4 mm for consistent surface finish Long life under abrasive conditions for cast iron The combination of the WKK20S grade and the Tiger‑tec Silver coating is designed to resist the abrasive wear typical of cast iron applications. The insert’s coated cemented carbide construction provides a wear‑resistant cutting edge that prolongs service intervals and reduces tool changes, supporting higher uptime in batch production. This wear resistance translates directly into predictable tool life and lower overall machining costs when facing highly abrasive grey or nodular cast irons. Stable chip control and improved surface quality A dedicated MK4 chipbreaker and the 80° rhombic outline deliver controlled chip formation and evacuation during turning of cast iron workpieces. The moderate 11° clearance angle reduces rubbing and enhances cutting efficiency, while the 0.4 mm corner radius helps maintain a consistent surface finish without compromising edge strength. These geometry choices contribute to process reliability and make the insert suitable for a range of finishing and light‑roughing operations in foundry component manufacture. Productivity and process security in series production Integration of a coated grade with optimised geometry offers immediate benefits for production environments that demand repeatability and high throughput. The insert’s specifications support consistent cutting performance and reduce the need for frequent intervention, which assists in maintaining cycle times and part quality. Documentation of the grade’s suitability for cast iron allows planning of tool‑change intervals and cost‑per‑part calculations, supporting data‑driven decisions for manufacturing engineers and toolroom managers. Practical selection and application notes Given the insert’s orientation towards cast iron, recommended cutting parameters should be selected with the material’s brittle, abrasive nature in mind; toolpath planning that promotes efficient chip evacuation will make the most of the MK4 chip control. The rhombic geometry offers flexibility for a variety of turning holders designed for CPGT‑style inserts. For tailored recommendations on speeds, feeds and holder compatibility, technical consultation is available through the supplier to match the insert to specific machine and workpiece conditions. For proven process stability in cast iron turning with the Walter Tools Tiger‑tec Silver grade, contact Metav Werkzeuge to request the CPGT060204-MK4 WKK20S insert or to obtain application‑specific cutting data and ordering options Technical data SKU: CPGT060204-MK4-WKK20S-WALTER Designation: CPGT060204-MK4 WKK20S Type: indexable turning insert Manufacturer: Walter Tools Core technical data Clearance angle: 11° Corner radius: 0.4 mm Size code: 06 Thickness code: 02 Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WKK20S Chipbreaker: MK4 Coating / material: coated cemented carbide Suitable for: cast iron (K) Plate shape: rhombic 80° Execution: T FAQ Which materials is this insert intended for? The CPGT060204-MK4 WKK20S insert is specified for cast iron applications; the WKK20S grade and Tiger‑tec Silver coating are tuned to resist the abrasive wear of cast material. How does the MK4 chipbreaker affect machining? The MK4 chipbreaker provides controlled chip formation and evacuation when turning cast iron, improving process stability and reducing the risk of entangled chips. What surface finish can be expected with the 0.4 mm radius? A 0.4 mm corner radius balances edge strength and finish quality, enabling consistent surface results in finishing and light‑roughing operations on cast iron components. Is the insert suitable for heavy roughing? The geometry and grade are optimised for stable, productive cutting in cast iron; for very heavy roughing, selection of insert size and machine capability should be reviewed to confirm suitability. Does the Tiger‑tec Silver coating improve tool life significantly? The Tiger‑tec Silver coating is engineered to enhance wear resistance in abrasive environments, contributing to extended tool life and more predictable machining performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
CPGT060204-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip control and predictable edge life to keep turning operations productive and repeatable; order directly via Metav Werkzeuge or consult their technical team for application-specific recommendations. CPGT060204-MM4 WSM01 turning insert (Tiger-tec Silver) by Walter Tools — coated carbide insert for rostfreier Stahl and superalloys CPGT060204-MM4 WSM01 is a coated carbide turning insert designed for demanding turning tasks on rostfreier Stahl and heat-resistant superalloys, offering robust edge stability and controlled chip formation for reliable production runs Tiger-tec Silver coated carbide grade WSM01 Optimised MM4 chipbreaker for stable chips Rhombic 80° shape with 11° relief 0.4 mm corner radius for consistent finishes Reliable cutting performance for difficult-to-machine alloys The Tiger-tec Silver coating combined with the WSM01 coated-carbide grade delivers high wear resistance and consistent edge retention when machining rostfreier Stahl and heat-resistant superalloys. The composition of the grade is tuned to reduce adhesive wear and support stable chip formation under the thermal loads typical for these materials. As a result, the insert provides predictable tool life, which helps planners estimate tool change intervals and reduces unexpected downtime. For operations that prioritise throughput and repeatability, this insert supports process standardisation across batches. Geometry engineered for predictable surface quality and process control The rhombic 80° insert form with a 0.4 mm corner radius and an 11° relief angle gives a well-balanced cutting geometry that combines edge strength with the ability to produce good surface finishes. The MM4 chipbreaker is engineered to control chip flow and avoid long, stringy chips that complicate unattended machining. The insert’s 02 thickness and its tolerance class G ensure consistent seat fit and repeatable cutting heights, minimising set-up variability and supporting stable machining parameters on lathes and turning centres. Economic operation through reduced rework and consistent output Optimised for rostfreier Stahl and superalloys, the insert’s wear behaviour reduces the risk of built-up edge and surface defects, translating into fewer reworked parts and lower scrap rates. The combination of a coated-carbide substrate and surface engineering yields a balance of toughness and wear resistance that is particularly useful for semi-finish and finish turning where surface integrity matters. For production planners, this means a favourable cost-per-part profile and improved downstream process stability. For further application advice or to match the insert to specific workpiece alloys and cutting conditions, Metav Werkzeuge’s technical advisors can provide tailored data and recommendations. Contact Metav Werkzeuge for application guidance on Walter Tools Tiger-tec Silver inserts and to secure suitable stock for sustained production runs Technical data Article number: CPGT060204-MM4-WSM01-WALTER Description: CPGT060204-MM4 WSM01 turning insert, Tiger-tec Silver Manufacturer: Walter Tools Series: Tiger-tec Silver Grade/sort: WSM01 Execution: T Core specifications Insert shape: Rhombus 80° Relief angle: 11° Corner radius: 0.4 mm Insert size: 06 Thickness: 02 Chipbreaker: MM4 Tolerance class: G Materials & special features Coating: Tiger-tec Silver (coated carbide) Material suitability: S / M (heat‑resistant superalloys / rostfreier Stahl) Series characteristics: Optimised for stable chip formation and edge life ISO designation: CPGT060204-MM4 WSM01 SKU: CPGT060204-MM4-WSM01-WALTER FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The insert grade WSM01 in the Tiger‑tec Silver series is specifically intended for rostfreier Stahl and provides improved chip control and wear resistance when compared with general-purpose grades. What does the MM4 chipbreaker achieve? The MM4 chipbreaker promotes controlled chip formation and evacuation during turning, reducing the incidence of long, entangling chips on both rostfreier Stahl and heat‑resistant superalloys. Which insert geometry ensures a balance between edge strength and finish? The rhombic 80° form combined with a 0.4 mm corner radius and 11° relief offers a robust cutting edge while enabling a good surface finish for semi‑finish and finish turning operations. Can this insert be used for titanium alloys? The WSM01 grade is designed for heat‑resistant superalloys and titanium (material group S) as indicated; performance will depend on cutting parameters and machine setup, so application-specific testing is advised. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPGT060204-MM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver performance and optimised chip control for reliable machining of demanding alloys; the insert delivers consistent edge stability and economical tool life. Order genuine Walter Tools inserts or consult Metav Werkzeuge for application advice and availability. CPGT060204-MM4 WSM20S — Rhombic 80° turning insert, Tiger·tec Silver (Walter Tools) A CPGT060204-MM4 WSM20S indexable insert engineered for high-performance turning and drilling applications on rostfreier Stahl and heat-resistant alloys Tiger·tec Silver coated carbide grade WSM20S Optimised MM4 chipformer for stable chip control Rhombic 80° geometry for versatile turning Suitable for rostfreier Stahl and superalloys High-performance coating and material compatibility for demanding cuts The combination of Tiger·tec Silver and a coated carbide substrate provides elevated thermal resilience and wear resistance under heavy loads. This makes the insert particularly suited to machining rostfreier Stahl and heat-resistant superalloys, where poor thermal conductivity and material toughness typically shorten tool life. The grade WSM20S is designed to maintain a stable cutting edge, reducing the tendency for built-up edge and enabling consistent component dimensions over longer series runs. Predictable chip control and secure edge stability for improved process security The MM4 chipformer, matched to the rhombic geometry, supports controlled chip formation and evacuation even in sticky or work-hardening materials. With a rhombic 80° shape, 11° free angle and a 0.4 corner radius, the insert balances strength at the cutting edge with the ability to produce a fine surface finish. The tolerance class G ensures repeatable geometry across inserts, contributing to predictable tool life and lower process variability in production environments. Practical integration and application benefits for production settings Designed for use where both roughing capacity and finishing capability are required, the insert suits multi-operation toolpaths involving bore enlargement and turning. The form factor CPGT060204-MM4 offers straightforward indexing and replacement in compatible toolholders, helping to minimise machine downtime. By combining robust wear resistance with optimised chip control, the insert supports higher metal removal rates while maintaining consistent surface quality—benefits that translate into improved throughput and lower overall tooling costs. For technical consultation on using the Walter Tools Tiger·tec Silver insert in specific rostfreier Stahl or high-temperature alloy applications, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for immediate advice and availability. Technical Data SKU: CPGT060204-MM4-WSM20S-WALTER Designation: CPGT060204-MM4 WSM20S Series: Tiger·tec Silver Manufacturer: Walter Tools Tolerance class: G Facts Free angle: 11° Corner radius: 0.4 Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Special features Coating: coated carbide (Tiger·tec Silver) Chipformer: MM4 Geometry: Rhombic 80° Application groups: rostfreier Stahl, superalloys / Titanium FAQ What materials is this insert suitable for? The CPGT060204-MM4 WSM20S from Walter Tools is specified for machining rostfreier Stahl and heat-resistant superalloys, offering a coating and substrate combination tailored to those groups. How does the MM4 chipformer influence cutting performance? The MM4 chipformer on the CPGT060204-MM4 WSM20S promotes stable chip formation and evacuation, which improves process security and surface finish when machining challenging materials. What does the rhombic 80° geometry mean for turning operations? Rhombic 80° geometry provides a good balance between cutting edge strength and access for turning and bore-finishing tasks, enhancing versatility for mixed production runs. Is the insert suitable for both roughing and finishing? Depending on the chosen corner radius and machine parameters, the Walter Tools insert can be applied to both roughing and finishing operations, delivering reliable edge stability. How does the Tiger·tec Silver coating extend tool life? Tiger·tec Silver coating enhances heat resistance and wear behaviour, allowing the insert to withstand higher thermal loads and maintain cutting-edge integrity for longer cycles. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product from Walter Tools.
CPGT060204-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger-tec Gold coating combined with the MP4 chipbreaker for durable, stable turning in steel; the 11° clearance and 0.4 mm nose radius deliver repeatable surface quality and production reliability. Order or request application advice directly via Metav Werkzeuge for fast technical assistance. CPGT060204-MP4 WPP10G – Walter Tools turning insert with Tiger-tec Gold coating and MP4 chipbreaker The CPGT060204-MP4 WPP10G is a rhombic 80° turning insert designed for productive machining of steel (ISO P) where wear resistance and stable chip control are required Tiger-tec Gold coating for enhanced wear resistance MP4 chipbreaker optimised for steel machining 11° clearance angle for stable cutting performance 0.4 mm nose radius for consistent surface finish Reliable wear performance for continuous production The coated carbide grade WPP10G, part of the Tiger-tec Gold series, combines a wear-resistant surface layer with an engineered substrate to extend tool life in demanding turning operations. The integration of the MP4 chipbreaker manages chip formation typical of steel machining, reducing rework and downtime. As a consequence, the insert provides a measurable improvement in process stability and tool life compared with uncoated grades, making it suitable for shops aiming to balance tool costs with consistent output. The design supports both medium and finishing cuts where predictable wear behaviour is an operational priority. Geometry that promotes repeatable surface quality The rhombic 80° form and the 11° clearance angle deliver secure seat and positive cutting engagement, while the 0.4 mm nose radius helps maintain consistent surface finish on turned components. These features reduce vibration and support dimensional repeatability, particularly on long runs or when tight tolerances are required. The compact insert size and plate thickness ensure compatibility with a wide range of standard tool holders, allowing straightforward integration into existing turning setups without complex tool requalification. Application scope and machining guidance Engineered specifically for the ISO P group, this insert excels on unalloyed and alloyed steel, coping with the heat and chip characteristics typical for these materials. The MP4 geometry promotes controlled chip segmentation and evacuation, which in turn reduces the risk of built-up edge and improves overall process security. For best results, pair this insert with stable holder arrangements and tailor cutting parameters to the specific steel grade and machine rigidity. The combination of coating, chipbreaker and geometry supports sustained productivity and reduced tooling interventions. For application advice or to request suitable inserts such as the Walter Tools CPGT060204-MP4 WPP10G, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CPGT060204-MP4-WPP10G-WALTER Designation: CPGT060204-MP4 WPP10G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP10G Facts Clearance angle: 11° Corner radius: 0.4 mm Insert size: 06 Thickness: 02 Insert form: Rhombus 80° Tolerance class: G Special features Coating / technology: Tiger-tec Gold (coated carbide) Chipbreaker: MP4 Material application: Steel (ISO P) Execution: T Plate designation without grade: CPGT060204-MP4 ISO designation: CPGT060204-MP4 WPP10G FAQ What materials is this insert suitable for? This insert is intended for machining steel and is specified for the ISO P material group; the WPP10G grade is optimised for typical steel heat and chip behaviour. Which geometry details ensure surface quality? The CPGT060204-MP4 WPP10G features a rhombic 80° shape, 11° clearance angle and a 0.4 mm nose radius to support consistent surface finish and dimensional repeatability. What does the Tiger-tec Gold designation mean? Tiger-tec Gold identifies the coating and substrate combination used by Walter Tools to enhance wear resistance and maintain edge stability under continuous turning conditions. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker is configured to produce short, controllable chips in steel turning, improving evacuation and reducing the risk of built-up edge, which supports uninterrupted production. Is the insert compatible with standard tool holders? The insert's form, size and thickness are designed for compatibility with common turning holders; seat and clamping should follow the tool holder manufacturer's recommendations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer Walter Tools.
CPGT060204-MP4 WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and an MP4 chipbreaker for dependable chip control and extended tool life in steel turning; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CPGT060204-MP4 WPP20G turning insert (for steel) by Walter Tools — Tiger‑tec Gold, MP4 chipbreaker A CPGT060204-MP4 WPP20G turning insert designed for productive steel machining, offering a robust coated‑carbide grade and a Rhombic 80° geometry for versatile general turning operations Tiger‑tec Gold coated carbide grade MP4 chipbreaker for reliable chip control Rhombic 80° insert geometry Radius 0.4 mm for stable cutting edge Consistent chip control for productive turning The coated‑carbide grade WPP20G, developed within the Tiger‑tec Gold series, combines a wear‑resistant coating with a geometry tuned for steel machining. With the MP4 chipbreaker, the insert promotes reliable chip control and stable cutting forces, which reduces process interruptions and improves cycle times. The Rhombic 80° form contributes to flexible approach angles, enabling operators to maintain cutting stability across a range of turning operations. This configuration supports a balance between durable cutting edge life and efficient metal removal when machining steels. Durable edge life and reproducible performance A corner radius of 0.4 mm and an 11° relief angle create a robust edge that resists premature wear while preserving dimensional accuracy. The coated base material offers improved resistance against abrasive and adhesive wear mechanisms commonly encountered when turning unalloyed and alloyed steel. As a result, tool change intervals become more predictable and component quality more consistent. The insert’s tolerance class G ensures reliable seat fitment and repeatable positioning in standard toolholders, supporting process stability in series production. Application focus: versatile for general steel machining The grade is explicitly tailored for group P materials according to ISO designation, which covers typical steels and common alloyed variants. This makes the insert suitable for a wide range of general turning tasks, from roughing to light finishing, where a combination of reliable machining and good economy is required. The Rhombic 80° shape and the compact plate size facilitate access in confined setups and on multifunction lathes, while the coated carbide construction contributes to improved surface quality and longer tool life in continuous operations. Contact Metav Werkzeuge for tailored advice on using Walter Tools turning inserts or to arrange a supply of CPGT060204-MP4 WPP20G for specific steel applications — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical data Article number: CPGT060204-MP4-WPP20G-WALTER ISO designation: CPGT060204-MP4 WPP20G Grade/series: WPP20G, Tiger‑tec Gold Chipbreaker: MP4 Geometry: Rhombic 80° Relief angle: 11° Corner radius: 0.4 mm Plate size: 06 Plate thickness: 02 Tolerance class: G Suitable for: Steel (ISO group P) Execution: T Manufacturer: Walter Tools Facts Coating: Tiger‑tec Gold Material base: Coated carbide Application focus: Steel machining (ISO P) Typical uses: General turning, roughing to light finishing Performance highlights: Optimised chip control, stable cutting edge Special features MP4 chipbreaker for controllable chips Wear‑resistant Tiger‑tec Gold technology Rhombic 80° for flexible approach angles Robust 0.4 mm corner radius for edge stability Tolerance class G for repeatable seating Manufacturer brand: Walter Tools FAQ What materials is this insert suitable for? The CPGT060204-MP4 WPP20G insert is designed for ISO group P materials and is suitable for machining a broad range of steel grades. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker on the CPGT060204-MP4 WPP20G improves chip formation and evacuation, contributing to steadier cutting conditions and fewer interruptions during steel turning. What are the defining geometry details to consider? The insert has a Rhombic 80° geometry with a 0.4 mm corner radius and an 11° relief angle; these features support access in constrained setups and provide a durable cutting edge for repeated use. Is this grade aimed at roughing or finishing? The WPP20G grade in the Tiger‑tec Gold series offers a balance suited to both productive roughing and light finishing operations in steel, depending on cutting parameters and machine rigidity. Does the insert require a specific toolholder? The insert conforms to standard indexing insert dimensions and tolerance class G, so compatible toolholders designed for CPGT forms are recommended to ensure correct seating and repeatable results. Manufacturer: Walter Tools; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPGT060208-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the MK4 chipbreaker to achieve consistent tool life and controlled chip formation in cast-iron turning; the rhombic 80° geometry with an 11° clearance provides process stability and predictable surface finish — order the insert directly via Metav Werkzeuge or consult their specialists for application advice. CPGT060208-MK4 WKK20S indexable turning insert — Tiger·tec Silver for cast iron (Walter Tools) CPGT060208-MK4 WKK20S is an indexable turning insert designed for machining cast iron with a focus on wear resistance and reliable chip control Tiger·tec Silver coating for long tool life Optimised for abrasive cast iron (K) MK4 chipbreaker for controlled chip formation Rhombic 80° geometry with 11° clearance Extended tool life through optimised coating and grade The combination of the Tiger·tec Silver coating and the WKK20S grade delivers improved abrasion resistance that extends service intervals under demanding cutting conditions. Coated carbide construction offers a hard, wear-resistant surface while retaining core toughness; this balance reduces flank wear and maintains cutting-edge integrity over longer runs. For operations focused on continuous productivity, the resulting durability contributes directly to lower tool-change frequency and more predictable production planning. Predictable chip control and surface consistency Built with an MK4 chipbreaker and a rhombic 80° shape, the insert promotes stable chip formation when turning cast iron, which is prone to short, brittle chips. The 0.8 mm nose radius, combined with the 11° clearance, supports consistent dimensional accuracy and a dependable surface finish in interrupted cuts and continuous profiles. These geometry choices make the insert well suited to typical cast-iron behaviours, helping to reduce secondary operations and rework. Process reliability and application clarity for cast materials Specified for ISO 513 group K (cast iron), this insert is tailored to abrasive materials that generate frequent, breaking chips; the WKK20S formulation is balanced for wear resistance and toughness in such contexts. The insert’s tolerance class G and standardised dimensions facilitate straightforward integration into established toolholding systems, enabling efficient stock replacement and minimised setup variation. For workshops seeking a robust, repeatable solution, the combination of coated carbide technology and an optimised chipbreaker delivers measurable benefits in cycle-time stability and part quality. Contact Metav Werkzeuge to discuss integrating the CPGT060208-MK4 WKK20S into production or to request cutting data and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CPGT060208-MK4-WKK20S-WALTER Designation: CPGT060208-MK4 WKK20S Product: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Facts Relief angle: 11° Nose radius: 0.8 mm Insert size: 06 Thickness: 02 Tolerance class: G Chipbreaker: MK4 Special features Grade: WKK20S (coated carbide) Optimised for cast iron (ISO 513 group K) Rhombic 80° insert shape Coating technology: Tiger·tec Silver Designed for abrasive wear and short, breaking chips FAQ What materials is this insert intended for? The CPGT060208-MK4 WKK20S from Walter Tools is formulated for cast iron (ISO 513 group K), addressing the abrasive wear and short-chip behaviour typical of those materials. How does the Tiger·tec Silver coating benefit performance? The Tiger·tec Silver coating on the WKK20S grade improves abrasion resistance and extends tool life, making the insert suitable for longer production runs in abrasive cast-iron applications. What role does the MK4 chipbreaker play in turning? The MK4 chipbreaker ensures controlled chip formation and evacuation when cutting cast iron, supporting consistent surface quality and reducing the risk of chip-related interruptions. Is the rhombic 80° geometry advantageous for interrupted cuts? Yes, the rhombic 80° shape combined with the 11° clearance provides a robust geometry that helps maintain edge stability and dimensional accuracy in interrupted and continuous turning operations. Which features support predictable part quality? Key elements such as the 0.8 mm nose radius, coated carbide WKK20S grade and the MK4 chipbreaker contribute to repeatable surface finish and process stability when machining cast iron with the CPGT060208-MK4 WKK20S. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation purposes only; there is no connection between our company and the named brands. The offered article is original, brand-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CPGT060208-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of a high‑performance indexable insert that combines the Tiger‑tec Silver series’ heat resistance with the WSM01 grade’s stability for machining stainless steel and heat‑resistant superalloys; benefit from the robust rhombic 80° geometry and fine 0.8 mm corner radius for consistent surface finish and extended cutting life. Order original Walter Tools inserts via Metav Werkzeuge or consult our specialists for application‑specific data. CPGT060208-MM4 WSM01 turning/boring indexable insert, Tiger‑tec Silver, rhombic 80° — Walter Tools The CPGT060208-MM4 WSM01 is a rhombic 80° indexable insert optimised for productive turning and boring of stainless steel and heat‑resistant superalloys where secure chip formation and edge stability are essential Tiger‑tec Silver coating for heat resistance Grade WSM01 for stainless steel and superalloys Rhombic 80° insert, 11° clearance 0.8 mm corner radius, MM4 chipbreaker Precision grade and heat resistance for demanding materials The combination of the WSM01 grade and the Tiger‑tec Silver series provides a coating and substrate pair engineered for elevated temperatures and abrasive cutting conditions. For work on stainless steel and nickel‑based alloys, the insert’s material pairing improves heat resistance and supports a stable cutting edge, which reduces the tendency for built‑up edge and helps to maintain dimensional accuracy over longer tool life. This results in fewer interruptions for tool changes and a more predictable production rhythm. Geometry designed for strength and surface quality The rhombic 80° form with an 11° clearance angle delivers a favourable balance between cutting strength and accessibility in shoulder and profile turning. The small 0.8 mm corner radius supports reproducible edge engagement and helps to achieve improved surface finishes on turned components, while the insert’s overall form contributes to controlled chip flow. The resulting stability supports higher feed rates or lower cutting forces, leading to more consistent part quality in series production. Controlled chip formation and reduced downtime Equipped with the MM4 chipbreaker, this insert promotes manageable chip shapes across ranges typical for stainless steel and superalloys; predictable chips reduce the risk of entanglement and protect both the workpiece and the machine. The combination of chip control and the coated hardmetal grade also extends tool life, lowering tooling consumption and supporting cost‑effective machining cycles. In practice, this improves machine uptime and can contribute to a better overall cost per part. Practical integration into turning operations The standard CPGT06 format of the insert allows compatibility with a wide range of common toolholders for turning and boring applications. The insert’s specification enables easy replacement and consistent seating, which simplifies tool change procedures and reduces set‑up variation. When paired with appropriate cutting parameters and coolant strategies, the insert from Walter Tools reliably supports a productive machining process with measurable stability gains. For challenging stainless steel and superalloy applications, request application advice from Metav Werkzeuge and secure genuine Walter Tools CPGT060208‑MM4 WSM01 inserts to improve process stability and cycle times Technical data Article number: CPGT060208-MM4-WSM01-WALTER Designation: CPGT060208-MM4 WSM01 Manufacturer: Walter Tools Data Clearance angle: 11° Corner radius: 0.8 mm Insert size: 06 Thickness: 02 Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WSM01 (coated cemented carbide) Chipbreaker: MM4 Insert form: Rhombus 80° Material application: suitable for stainless steel and heat‑resistant superalloys (S / M) FAQ What materials is this insert best suited for? The CPGT060208‑MM4 WSM01 insert from Walter Tools is optimised for stainless steel and heat‑resistant superalloys, offering heat‑resistant coating behaviour and stable edge performance for these groups. Can the insert achieve good surface finish on thin‑walled components? With its rhombic 80° geometry and a 0.8 mm corner radius, the insert supports improved surface quality; appropriate feeds and stiffness in the setup remain important for thin‑walled work. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker on the CPGT060208‑MM4 WSM01 produces controlled chip shapes that minimise interference with the workpiece and reduce the likelihood of chip entanglement, helping to maintain continuous machining. Is this insert compatible with standard CPGT06 toolholders? Yes, the insert format corresponds to the common CPGT06 family and fits standard toolholders designed for that insert geometry. What performance advantages does the Tiger‑tec Silver series provide? The Tiger‑tec Silver series increases thermal and wear resistance at the cutting edge, which, when combined with the WSM01 grade, contributes to longer tool life and more consistent cutting performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPGT09T301-MM4 WSM01 MM4 Wendeplatten - Walter Tools
Optimise machining of stainless steels and heat‑resistant alloys with the proven combination of the WSM01 grade and Tiger‑tec Silver surface technology for stable chip formation and extended tool life. Order the insert directly via Metav Werkzeuge or request tailored cutting data from the technical team. CPGT09T301-MM4 WSM01 — Walter Tools indexable insert, Tiger‑tec Silver, 11° clearance, 0.1 mm nose radius The CPGT09T301-MM4 WSM01 is an indexable insert designed for boring and turning operations on stainless steels and heat‑resistant superalloys, offering a balance between edge stability and surface quality. Tiger‑tec Silver coating for heat resistance Grade WSM01 for stainless and superalloys 11° clearance angle for stable engagement 0.1 mm nose radius for precise finishing Improved reliability on stainless steels and superalloys The combination of the Tiger‑tec Silver series and the WSM01 grade gives a coated carbide performance tailored to materials that challenge cutting edges. The platelet's substrate and coating chemistry favour thermal resilience and oxidation resistance, which helps to reduce built‑up edge and maintain a stable cutting edge under elevated temperatures. For ISO group M (stainless steels) and S (superalloys, titanium), this results in more predictable tool life and consistent component surface integrity, especially where heat generation and material work hardening would otherwise compromise process stability. Geometry engineered for chip control and surface finish The insert’s rhombic 80° form, combined with an 11° clearance angle and a 0.1 mm nose radius, creates a cutting geometry that supports both robust engagement and fine finishing. The MM4 chipbreaker is configured to promote segmented, controllable chips in difficult‑to‑machine materials, reducing the risk of long stringing chips and improving evacuation. With a T3 insert thickness, the design offers sufficient rigidity for interrupted cuts while allowing precise edge contact for finishing passes, resulting in reduced rework and improved first‑pass yields. Productivity gains through stable cutting and predictable life In series production, repeatability and minimal process variation are decisive. The CPGT09T301‑MM4 in WSM01 provides a combination of wear resistance and edge stability that reduces index‑and‑replace frequency and supports longer uninterrupted runs. Stable chip formation and a consistent edge condition decrease the likelihood of unexpected tool changes and enable tighter control of surface roughness, which translates into lower machining costs per part and higher overall equipment effectiveness. For integration into toolrooms, the insert’s standard designation and form factor simplify holder selection and inventory management. Contact Metav Werkzeuge for bespoke cutting data and availability of Walter Tools Tiger‑tec Silver inserts; the team can advise on optimal cutting parameters and supply planning to match production needs. Technical Data SKU: CPGT09T301-MM4-WSM01-WALTER Type: Indexable insert for boring/turning Designation: CPGT09T301-MM4 WSM01 Series: Tiger‑tec Silver Manufacturer: Walter Tools Grade: WSM01 Chipbreaker: MM4 Facts Clearance angle: 11° Nose radius: 0.1 mm Insert shape: Rhombus 80° Insert size: 09 Thickness: T3 Tolerance class: G Special features Coated carbide grade Suitable for stainless steels (ISO M) Suitable for superalloys and titanium (ISO S) Stable chip formation Precise finishing capability Series: Tiger‑tec Silver FAQ Which materials is this insert suited for? The CPGT09T301‑MM4 WSM01 is intended for stainless steels and heat‑resistant superalloys (ISO groups M and S); the WSM01 grade and Tiger‑tec Silver coating enhance thermal resistance and chip behaviour on these materials. What machining tasks match this geometry? The rhombic 80° form and 0.1 mm nose radius are suitable for a mix of roughing and finishing in turning and boring applications, where a balance of edge strength and surface quality is required. How does chip control perform with this insert? The MM4 chipbreaker is designed to produce stable, segmented chips in demanding materials, improving evacuation and reducing the risk of chip interference during continuous machining. What impact does the WSM01 grade have on tool life? WSM01 is a coated carbide grade engineered for materials that generate heat and strain the cutting edge; it provides improved edge life and a more consistent wear pattern, helping to extend operating intervals between indexing. Is the insert compatible with standard holders for CPGT inserts? The CPGT09T301‑MM4 format follows common CPGT indexable insert dimensions; compatibility should be checked against holder specifications to confirm seat and clamp fit. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
CPGT09T304-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
The combination of Tiger-tec Silver coating, the WSM01 grade and the compact Rhombus 80° geometry ensures stable cutting and reliable chip control for demanding applications; order directly via Metav Werkzeuge or consult the team for process-specific recommendations. CPGT09T304-MM4 WSM01 – Indexable insert, Rhombus 80°, WSM01 grade by Walter Tools for rostfreier Stahl and superalloys CPGT09T304-MM4 WSM01 is a coated carbide indexable insert designed for drilling and counterboring operations, tailored to tackle rostfreier Stahl and heat-resistant superalloys where edge stability and controlled chip formation are critical Tiger-tec Silver series coated insert WSM01: coated carbide for tough materials Rhombus 80° insert form for versatile use MM4 chipbreaker for secure chip control Engineered for demanding materials to reduce process variation The WSM01 grade, part of the Tiger-tec Silver family, is a coated carbide formulation developed for high thermal and mechanical loads encountered when machining rostfreier Stahl and heat-resistant alloys. This insert combines a thermally stable coating with a substrate engineered for edge strength, which reduces the risk of built-up edge and premature failure. As a result, the machining process becomes more predictable: tool life is stabilised and rework due to edge degradation is reduced. For production environments where repeatable component quality matters, the material and coating pairing offers a measurable improvement in process consistency and surface integrity. Geometry and chip control focused on productivity The Rhombus 80° plate form, with a compact 0.4 mm corner radius and an 11° clearance angle, gives a balanced combination of access and strength for drilling and counterboring tasks. The insert’s MM4 chipbreaker is configured to produce short, manageable chips even under interrupted cuts and variable feeds, improving evacuation in deep or constrained holes. This geometry supports stable cutting forces and lowers vibration risk, which in turn helps to maintain dimensional accuracy and surface finish. For mixed-batch production where tool change intervals and downtime affect throughput, the design reduces process interruptions and contributes to higher net productivity. Greater process efficiency through wear-resistant construction Thanks to the coated carbide base and the WSM01 formulation, the insert shows good resistance to abrasive and adhesive wear typical of tough alloys and rostfreier Stahl. The robust edge preparation and coating adhesion reduce flank wear progression, extending effective cutting life and lowering the frequency of index changes. From a cost-efficiency perspective, extended tool life and fewer interruptions translate into improved machine utilisation and lower per-part tooling costs. Where cycle time and repeatability are priorities, integrating these inserts can be part of a broader strategy to raise throughput without sacrificing component quality. Practical compatibility and application guidance The insert is intended for applications that require controlled cutting in materials classified under ISO group M (rostfreier Stahl) and S (heat-resistant superalloys and titanium). The T-geometry and compact plate size allow use in a variety of toolholders for drilling and counterboring operations. When programming feeds and speeds, prioritise stable chip formation and moderate cutting depths to exploit the MM4 chipbreaker’s strengths. For high-temperature alloys, slower speeds with steady feeds often allow the coated substrate to perform optimally, whereas for some rostfreier Stahl operations a slight increase in feed can help prevent workpiece material from smearing on the cutting edge. Where process windows are narrow, a short trials phase with data logging is recommended to define the optimal parameters for repeatable results. Contact Metav Werkzeuge today for tailored application advice on the Walter Tools CPGT09T304-MM4 WSM01 insert and to assess suitability for specific rostfreier Stahl and superalloy operations Technical data Article number / SKU: CPGT09T304-MM4-WSM01-WALTER Designation: CPGT09T304-MM4 WSM01 Product type: Indexable insert for drilling/counterboring Series: Tiger-tec Silver Grade: WSM01 Manufacturer: Walter Tools Core measurements and tolerances Plate form: Rhombus 80° Plate size: 09 Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: T3 Tolerance class: G Construction and suitability Chipbreaker type: MM4 Substrate / Coating: coated carbide (WSM01) Geometry designation: T execution Suitable for: rostfreier Stahl (ISO M) Suitable for: heat-resistant superalloys / titanium (ISO S) Typical applications: drilling, counterboring in demanding materials FAQ What materials is this insert best suited for? The CPGT09T304-MM4 WSM01 insert from Walter Tools is formulated for machining rostfreier Stahl and heat-resistant superalloys, combining a coated carbide grade with geometries optimised for secure chip control. How does the MM4 chipbreaker affect machining performance? The MM4 chipbreaker produces compact chips and stabilises cutting forces, improving chip evacuation and reducing the risk of re-cutting, which benefits hole quality and tool life when machining stubborn materials. Is this insert compatible with standard drilling holders? Yes, the Rhombus 80° form and T3 thickness fit common indexable insert holders for drilling and counterboring, provided the toolholder supports the CPGT09T304-MM4 geometry. What benefits does the Tiger-tec Silver series provide? The Tiger-tec Silver coating enhances thermal resistance and reduces adhesive wear, enabling longer effective tool life and more consistent performance during challenging cuts in rostfreier Stahl and similar alloys. Can the WSM01 grade be used for titanium? WSM01 is suitable for certain applications in titanium and other high-temperature materials (ISO group S), but parameters should be adapted—slower cutting speeds and optimised feeds—to match the specific alloy and geometry. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The item offered is original, brand-new merchandise from the manufacturer.
CPGT09T304-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WSM20S grade for reliable machining of stainless steels and heat‑resistant superalloys; the robust MM4 chipbreaker and rhombic geometry ensure consistent chip control and process stability. Order the insert directly via Metav Werkzeuge or consult the specialists for application guidance. Bohr-/Aufbohrwendeschneidplatte CPGT09T304-MM4 WSM20S — indexable insert, Tiger‑tec Silver, Walter Tools (Rhombic 80°, 11° free angle) The CPGT09T304-MM4 WSM20S is an indexable insert designed for demanding machining tasks on stainless steels and heat‑resistant superalloys, suitable for both drilling/boring and turning applications Tiger‑tec Silver coating technology Optimised for stainless steels and superalloys Rhombic 80° geometry for versatile cutting Stable chip control with MM4 breaker Robust grade for demanding materials and longer tool life The WSM20S grade, part of the Tiger‑tec Silver series, is a coated carbide solution engineered for materials that challenge conventional tooling. Its composition and coating promote a stable cutting edge under high thermal load, which reduces the frequency of edge breakage and prolongs useful life. For production environments where consistent cycle times and low tool-change frequency matter, this insert delivers measurable improvements in process reliability and uptime. The technical design supports secure chip formation when machining stainless steels and temperature‑resistant alloys, translating into fewer interruptions and more predictable batch throughput. Geometry and chip control that stabilise machining processes The insert’s Rhombic 80° shape, combined with the MM4 chipbreaker and an 11° free angle, provides a balance between strength and accessibility into the cut. The 0.4 mm corner radius and T3 thickness contribute to edge stability and allow for reliable shoulder cuts and intermittent engagement. These geometric choices help to maintain dimensional accuracy and surface finish while minimising vibrations. In practice, the design reduces the tendency for built‑up edge on difficult materials, enabling operators to maintain higher feeds and consistent surface quality for longer tool life. Practical benefits and recommended application areas This indexable insert is intended for heavy or semi‑finish turning where thermal resistance and chip control are critical. The grade and coating combination is especially appropriate for machining components made from stainless steels and superalloys (ISO groups M and S), where heat generation and material toughness can otherwise compromise the cutting edge. Employing this insert contributes to improved part consistency and less rework, supporting higher productivity and lower total machining costs per component. The product aligns with Walter Tools’ reputation for process security and stable cutting performance, making it suitable for production lines with tight tolerances and repeatability requirements. Consult Metav Werkzeuge to define the optimal cutting data and ensure the Walter Tools CPGT09T304-MM4 WSM20S insert is selected and applied for peak process efficiency Technical Data SKU: CPGT09T304-MM4-WSM20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CPGT09T304-MM4 WSM20S Walter Tools Grade: WSM20S Series: Tiger‑tec Silver Manufacturer: Walter Tools Core technical data Free angle: 11° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Tolerance class: G Special features Coating: Tiger‑tec Silver (coated carbide) Chipbreaker: MM4 Geometry: Rhombic 80° Material suitability: stainless steels (M), heat‑resistant superalloys / titanium (S) Execution: T (top geometry orientation) FAQ What materials is this insert best suited for? The Walter Tools CPGT09T304-MM4 WSM20S insert is formulated for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering enhanced thermal resistance and secure chip formation. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker on the CPGT09T304-MM4 promotes controlled chip formation and evacuation, which reduces the risk of built‑up edge and stabilises the cutting process for consistent surface quality. Can the insert be used for both turning and boring operations? Yes, the designation and geometry indicate suitability for drilling/boring and turning inserts; the Rhombic 80° form supports versatile engagement angles for a range of operations. What advantages does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating enhances heat resistance and wear performance, increasing edge life and enabling higher productivity when machining difficult materials. Is the corner radius important for surface finish? The 0.4 mm corner radius contributes to a stable cutting edge and helps achieve consistent surface quality while resisting chipping under interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and registered marks are cited for explanatory purposes only and do not imply any affiliation with or endorsement by the manufacturer. The described item is an original, factory‑new product of the manufacturer.
CPGT09T304-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating combined with the MP4 chipbreaker to achieve consistent chip control and extended tool life in steel turning; the rhombic 80° geometry with 11° clearance supports stable cutting and improved surface finish. Order the CPGT09T304‑MP4 WPP10G turning insert directly via Metav Werkzeuge or request application advice from their consultants. CPGT09T304-MP4 WPP10G turning insert — Tiger‑tec Gold, MP4 chipbreaker — Walter Tools The CPGT09T304‑MP4 WPP10G is a rhombic 80° turning insert designed for productive machining of steel, optimised to combine durable coating technology with controlled chip formation for predictable process results. Tiger‑tec Gold coated grade WPP10G MP4 chipbreaker for stable chip control Rhombic 80° form with 11° clearance 0.4 mm corner radius for fine finishing Durable coating that extends cutting performance The combination of the Tiger‑tec Gold coating and the WPP10G grade delivers a balance between wear resistance and toughness, which translates into longer tool life and consistent component quality when machining steel. The coated cemented carbide substrate is optimised for the thermal and mechanical loads encountered in steel turning; this reduces flank wear and helps maintain the cutting edge under interrupted and continuous cuts. For users seeking reliable productivity, the coating reduces downtime associated with frequent insert changes while preserving dimensional accuracy. Predictable chip control for safer, faster machining The integrated MP4 chipbreaker is engineered to produce short, manageable chips across typical steel applications, limiting the risk of entanglement and improving swarf evacuation. Controlled chip formation contributes directly to process stability and enables more aggressive feeds where appropriate, resulting in improved material removal rates without sacrificing surface quality. The insert’s design supports a steady cutting force profile, which benefits machine tool life and fixture integrity. Geometry tuned for precision and finish With a rhombic 80° form, 11° clearance and 0.4 mm corner radius, the insert provides a practical compromise between edge strength and fine finishing capability. The geometry enables secure tool positioning in common turning toolholders and promotes reproducible component tolerances. The T3 thickness contributes to insert stability under load, while the modest corner radius helps achieve good surface finishes on turned parts without increasing cutting forces excessively. Application guidance and process advantages Assigned to the material group P (steel), this insert is suitable for a wide range of unalloyed and alloyed steels, covering applications that demand a mix of wear resistance and impact tolerance. Process planners will value the insert’s ability to deliver consistent results across varying steels, reducing the number of tooling variants required in small to medium batch production. For machining strategies, pairing the insert with tuned feeds and cutting speeds enhances both economy and repeatability of results. For availability, material-specific recommendations and ordering of Walter Tools CPGT09T304‑MP4 WPP10G turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CPGT09T304-MP4-WPP10G-WALTER Product: Drehwendeschneidplatte CPGT09T304-MP4 WPP10G Manufacturer: Walter Tools Core specifications Insert shape: Rhombic 80° Size designation: 09 Clearance angle: 11° Corner radius: 0.4 mm Thickness: T3 Chipbreaker: MP4 Materials & features Coating / series: Tiger‑tec Gold Grade: WPP10G Material group suitability: Steel (P) Tolerance class: G Execution: T FAQ Which materials are recommended for this insert? The CPGT09T304‑MP4 WPP10G insert from Walter Tools is specified for steel (P) and is engineered for unalloyed and alloyed steels according to ISO grouping. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPP10G grade increases wear resistance and thermal stability, which supports longer cutting edge life and consistent part quality in steel turning. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker produces short, controllable chips that improve swarf management and process safety, enabling steadier feeds and higher productive cutting rates where suitable. Can this insert be used for finishing operations? With its 0.4 mm corner radius and rhombic 80° geometry, the insert is suitable for finishing and near‑finishing operations that require good surface quality while maintaining adequate edge strength. Is the insert compatible with standard turning toolholders? The rhombic 80° form and T3 thickness make the insert compatible with common indexable turning toolholders; ensure the holder accepts the CPGT index designation and clamping style. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPGT09T304-MP4 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a precise MP4 chipbreaker to improve cycle times and chip control while machining steel; order inserts directly via Metav Werkzeuge or consult the team for cutting data and inventory availability. CPGT09T304-MP4 WPP20G turning insert (Tiger·tec Gold, MP4) – Walter Tools The CPGT09T304-MP4 WPP20G is an indexable turning insert for steel machining that combines a Tiger·tec Gold coated carbide grade with a specifically profiled MP4 chipbreaker to ensure predictable chip formation and long tool life. Tiger·tec Gold coated grade WPP20G MP4 chipbreaker for consistent chip control 11° relief angle for stable cutting action Rhombic 80° form, 0.4 mm corner radius Higher throughput through an optimised coated grade The Tiger·tec Gold WPP20G grade is designed as a coated carbide solution tailored for the thermal and mechanical demands of steel machining. Its coating technology improves wear resistance while preserving cut-edge toughness, which results in fewer tool changes and extended productive runtime. For process planners, this leads to a measurable improvement in machining consistency and reduced downtime. The grade is specified for the ISO P group (steel), which confirms compatibility with unalloyed and alloyed steels and supports a broad range of turning operations where both wear resistance and edge stability are required. Predictable chip control and geometry for reliable results The insert’s MP4 chipbreaker and rhombic 80° geometry deliver controlled chip segmentation and evacuation, reducing the risk of chip entanglement and improving surface finish stability. The 11° relief angle and a 0.4 mm corner radius balance cutting strength with edge definition: the clearance reduces rubbing while the corner radius supports a robust cutting edge, beneficial in medium- to heavy-duty cuts. As a result, workplace safety and machine utilisation are assisted by fewer interruptions and consistent part quality across shifts. Durability and process security in daily production Coating plus substrate combination yields a tool that is both wear-resistant and tolerant to heat peaks encountered when turning steel at elevated cutting speeds. This contributes directly to process security: fewer unexpected tool failures, repeatable surface quality and longer intervals between indexings. The insert’s tolerance class G ensures dimensional reliability for toolpath programming and workpiece conformity. For production managers, these attributes translate into a reliable baseline for cycle time estimates and quality assurance procedures. Compatibility, selection and simple integration into tool systems The insert is supplied in the CPGT09T304-MP4 format, thickness class T3 and ISO size 09, making it compatible with a wide range of standard insert holders that accept rhombic 80° plates. The designation confirms fitment and orientation for established toolholders; matching holders and clamping torque settings should be referenced in the machine tool or holder documentation. For applications requiring steel machining—primary ISO group P—this insert is a versatile choice for roughing and finishing passes where balanced edge life and chip control are priorities. Contact Metav Werkzeuge for tailor-made cutting data, availability and application advice for Walter Tools turning inserts such as the CPGT09T304-MP4 WPP20G — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: CPGT09T304-MP4-WPP20G-WALTER Article number / designation: CPGT09T304-MP4 WPP20G Product type: Drehwendeschneidplatte (turning insert) Brand: Walter Tools Facts Relief angle: 11° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 09 Plate thickness: T3 Tolerance class: G Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: MP4 Material application: Steel (ISO group P) Execution: T FAQ What materials is this insert suitable for? The CPGT09T304-MP4 WPP20G is designed primarily for steel machining and is specified for the ISO P material group, meaning it handles unalloyed and alloyed steels effectively. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP20G grade increases wear resistance and heat tolerance, resulting in longer edge life and more consistent performance during high-speed or continuous turning cycles. What does the MP4 chipbreaker do? The MP4 chipbreaker provides controlled chip formation and evacuation, which reduces the risk of chip build-up and aids surface finish and tool life stability in turning operations. Is the geometry compatible with standard holders? Yes; the rhombic 80° form and ISO designation CPGT09T304-MP4 align with common insert holders designed for rhombic plates of size 09, but holder compatibility should be checked against the toolholder catalogue. What effect does the 0.4 mm corner radius have on parts? A 0.4 mm corner radius improves edge strength and contributes to a stable cutting action, helping to produce consistent surface finishes while tolerating moderate interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter Tools brand is a registered trademark of its respective owner. Protected trademarks and trade names remain the property of their respective holders. The mentioned brand is used solely for explanatory purposes. There is no connection between our company and the named brand. The offered item is original, factory-new stock of the manufacturer.
CPGT09T308-MK4 WKK20S Wendeplatten - Walter Tools
Taking advantage of Tiger‑tec Silver coating and the WKK20S grade together with the MK4 chipbreaker and a Rhombic 80° geometry delivers consistent performance when machining abrasive cast iron; benefit from extended tool life and controlled chip formation. Order the insert directly via Metav Werkzeuge or contact our consultants for application-specific cutting data. CPGT09T308-MK4 WKK20S – Turning indexable insert, Rhombic 80° (Walter Tools) The CPGT09T308-MK4 WKK20S is an indexable turning insert engineered for efficient, repeatable machining of cast iron components, combining a Tiger‑tec Silver coating with a chipformer optimised for short, breaking chips. Tiger‑tec Silver coating for wear resistance Optimised for cast iron (ISO group K) Rhombic 80° form with 0.8 mm corner radius MK4 chipbreaker for controlled chip formation Superior wear resistance and reliable performance for cast iron The combination of the WKK20S grade and Tiger‑tec Silver coating is designed specifically to meet the demands of cast iron machining (ISO group K). This coated cemented carbide composition addresses abrasive wear and the typically short, brittle chips encountered on cast parts, resulting in improved edge stability and longer tool life. The engineering of the grade promotes consistent cutting behaviour across batch production, reducing rework and securing process reliability in series turning applications. Geometry and chip control that boost productivity The insert’s Rhombic 80° geometry together with an MK4 chipbreaker provides predictable chip formation and stable cutting forces. A 0.8 mm corner radius supports smooth surface finishes while maintaining strength at the cutting edge, and the 11° clearance angle helps to reduce rubbing and heat build‑up. The combination of these features enables higher cutting feeds and stable metal removal rates, which contributes directly to shorter cycle times and more efficient machining cycles on abrasive cast iron workpieces. Practical handling and process benefits in production environments Supplied as a size 09 insert with thickness T3 and tolerance class G, this indexable insert facilitates straightforward tool management and repeatable set‑ups. The CPGT09T308-MK4 WKK20S is suitable for serial turning where tool life and consistent surface quality are priorities; its chip control reduces interruptions from poor chip evacuation and minimises secondary operations. For tooling systems running multiple inserts, the predictable performance of this grade supports planning for tool changes and inventory, helping to control manufacturing costs over time. Contact Metav Werkzeuge to request tailored cutting data, delivery options and expert advice for genuine Walter Tools Tiger‑tec Silver turning inserts. Technical data Article number: CPGT09T308-MK4-WKK20S-WALTER Type: Turning indexable insert Brand: Walter Tools Facts Clearance angle: 11° Corner radius: 0.8 mm Insert shape: Rhombic 80° Insert size: 09 Thickness: T3 Tolerance class: G Special features Grade: WKK20S Coating technology: Tiger‑tec Silver Chipbreaker: MK4 Suitable for: Cast iron (ISO group K) Material: Coated cemented carbide Series: Tiger‑tec Silver Execution: T Designation: CPGT09T308-MK4 FAQ What materials is this insert intended for? The insert is specified for machining cast iron (ISO group K); the WKK20S grade and Tiger‑tec Silver coating are optimised for abrasive cast materials. How does the MK4 chipbreaker influence machining? The MK4 chipbreaker delivers controlled, short chips and improved evacuation, which reduces stoppages and supports consistent surface quality during turning. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius strengthens the cutting edge and helps to produce a smoother finish while maintaining edge robustness for interrupted or heavy cuts. Is this insert compatible with standard clamping systems? The insert follows common indexable insert dimensions for a size 09 Rhombic 80° form and is suitable for toolholders designed for that geometry and tolerance class G. Can this grade be used for mixed production of different cast iron types? Yes; WKK20S is a versatile Walter grade for a broad range of cast iron types, offering stable chip behaviour across varying cast structures. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer.
CPGT09T308-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating, the WSM01 grade tailored for stainless steels and superalloys, and the Rhombus 80° geometry with an 11° relief for reliable chip control and extended edge life; order the CPGT09T308‑MM4 WSM01 insert directly via Metav Werkzeuge or contact their consultants for application support. CPGT09T308‑MM4 WSM01 — Walter Tools indexable insert, Tiger‑tec Silver, 11° relief CPGT09T308‑MM4 WSM01 is an indexable insert designed for drilling, boring and turning tasks in demanding materials such as stainless steels and heat‑resistant superalloys Tiger‑tec Silver coated carbide grade Geometry Rhombus 80° for versatility WSM01 grade for stainless & superalloys 11° relief angle for controlled chip flow High‑performance grade for heat‑sensitive and tough materials The WSM01 cutting grade, part of the Tiger‑tec Silver family, is a coated carbide engineered for machining stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S). This combination increases resistance to thermal and mechanical wear, which in turn stabilises the cutting edge under high temperatures and heavy loads. For production environments that demand consistent component quality and predictable tool life, this insert supports steady productivity by reducing downtime for edge changes and improving surface integrity. Geometry and chip control that maintain process stability The Rhombus 80° plate form with a 0.8 mm corner radius and 11° relief provides a favourable balance between cutting edge robustness and accessibility in shoulder and profile turning. The integrated MM4 chipbreaker is configured to promote controlled chip formation when working with sticky or ductile materials, lowering the risk of built‑up edge and improving evacuation. A T3 plate thickness contributes to mechanical strength at the clamping interface, helping to maintain concentricity and dimensional repeatability during extended cycles. Shop‑floor benefits: repeatability, efficiency and fewer interventions As an indexable solution, this insert simplifies tool management: standardised clamping and clear grade identification mean predictable changeovers and easier inventory control. The combination of coated carbide, a dedicated chipbreaker and the Rhombus 80° geometry leads to improved surface finish and reduced scrap rates in serial production. By supporting reliable chip control and stable cutting edges, the insert helps to increase effective machine uptime and reduce the total cost per component in medium to high batch sizes. For tailored advice on integrating this Walter Tools CPGT09T308‑MM4 WSM01 insert into machining processes for stainless steels or superalloys, contact Metav Werkzeuge’s technical team at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable holders and cutting data Technical data SKU: CPGT09T308‑MM4‑WSM01‑WALTER Designation: CPGT09T308‑MM4 WSM01 Series: Tiger‑tec Silver Manufacturer: Walter Tools Numbers / Core technical data Relief angle: 11° Corner radius: 0.8 mm Plate size: 09 Thickness: T3 Tolerance class: G Designs / Special features Chipbreaker: MM4 Plate form: Rhombus 80° Grade: WSM01 (coated carbide) Material suitability: stainless steels (M), superalloys and titanium (S) FAQ Which materials can this insert machine effectively? The WSM01 grade in the CPGT09T308‑MM4 WSM01 insert is intended for stainless steels (ISO M) and heat‑resistant superalloys and titanium (ISO S), offering thermal and mechanical resistance suited to these groups. What is the benefit of the MM4 chipbreaker? The MM4 chipbreaker promotes stable chip formation and evacuation when machining ductile or adhesive materials, reducing built‑up edge and supporting consistent surface finish with the Walter Tools indexable insert. How does the Rhombus 80° geometry affect application scope? A Rhombus 80° form delivers versatility across turning, boring and certain drilling operations by giving a good compromise between cutting accessibility and edge strength, suitable for both profile and shoulder work. What are the dimensional specifics of the insert? This insert features a 0.8 mm corner radius, 11° relief angle, plate size 09 and T3 thickness, which together govern edge strength, approach angle and clamping stability. Does the Tiger‑tec Silver coating improve tool life? Yes, the Tiger‑tec Silver coating enhances wear resistance and heat management, contributing to longer cutting edge life and more predictable tool performance under demanding cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are used for explanatory purposes only and do not imply any affiliation between our company and the mentioned manufacturers. The offered item is an original, brand‑new product from the manufacturer.
CPGT09T308-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Benefit from a combination of high process security and extended tool life thanks to the Tiger·tec Silver coating and the MM4 chipbreaker; ideal for machining stainless steels and heat-resistant alloys. Order the insert directly via Metav Werkzeuge or consult our team for application advice. CPGT09T308-MM4 WSM20S turning insert — Tiger·tec Silver coating, MM4 chipbreaker, Walter Tools The CPGT09T308-MM4 WSM20S is a rhombic 80° turning insert with a 0.8 mm corner radius and MM4 chipbreaker, designed for reliable machining of stainless steels and high-temperature alloys Tiger·tec Silver coating for wear resistance MM4 chipbreaker for reliable chip control Rhombic 80° form with 0.8 mm corner radius Optimised for stainless steel and superalloys Consistent performance in demanding materials The coated grade WSM20S in the Tiger·tec Silver family is tuned for the specific demands of stainless steels (ISO group M) and heat-resistant alloys (ISO group S). Its substrate and coating balance hardness and toughness to reduce edge wear and adhesion under high cutting temperatures. This results in a measurable improvement in tool life and process stability, which supports predictable cycle times and reduces unscheduled tool changes on the production floor. The design is particularly suitable where secure chip formation and sustained cutting-edge strength are decisive for productivity. Geometry and chip control that stabilise processes The rhombic 80° geometry combined with the MM4 chipbreaker promotes controlled chip flow and repeatable cutting conditions. The 0.8 mm corner radius and 11° clearance angle help distribute cutting forces and lower peak loads on the cutting edge, improving surface integrity and dimensional consistency. These geometric choices reduce the risk of built-up edge and enable stable turning when facing variable feed or interrupted cuts. As a result, the insert contributes directly to lower rework rates and more consistent part quality. Coating and robustness for longer runtime The Tiger·tec Silver coating provides thermal and abrasive resistance without sacrificing toughness, which is important when machining materials that generate heat or tend to work-harden. Combined with the insert's T3 thickness, the system offers a robust cutting edge that tolerates tougher engagement angles and prolonged use. The coating technology also aids in chip evacuation and reduces friction at the cutting zone, supporting consistent machining performance and making the insert a cost-effective choice across medium- and high-duty turning tasks. Practical benefits for workshop efficiency Specified as a turning and boring indexable insert, the component is straightforward to implement in standard toolholders and is compatible with common clamping systems. The combination of optimized chip control, robust coating and purposeful geometry helps to shorten set-up times and reduce scrap—improvements that benefit both small-batch shops and larger production lines. Backed by Walter Tools development, this insert supports stable process behaviour and repeatable results, which in turn enhances overall shop-floor efficiency and confidence in daily operations. Contact Metav Werkzeuge for tailored process recommendations or order the CPGT09T308-MM4 WSM20S insert through Metav Werkzeuge to ensure optimal setup and cutting data for specific materials Technical data Article number: CPGT09T308-MM4-WSM20S-WALTER Designation: CPGT09T308-MM4 WSM20S Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM20S Chipbreaker: MM4 Form: Rhombus 80° Thickness: T3 Facts Clearance angle: 11° Corner radius: 0.8 mm Insert size: 09 Tolerance class: G Special features Coating: Tiger·tec Silver Material applications: stainless steels (M), superalloys and titanium (S) Application: turning / boring indexable insert Geometry: rhombic 80° with MM4 chip control FAQ What materials is this insert suitable for? The Walter Tools CPGT09T308-MM4 WSM20S insert is specialised for stainless steels (ISO group M) and heat-resistant superalloys/titanium (ISO group S), offering balanced wear resistance and edge stability. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker on the CPGT09T308-MM4 improves chip control and evacuation, reducing the likelihood of chip-related interruptions and supporting consistent surface finish and tool life. Can this insert be used for interrupted cuts? Yes, the combination of the insert geometry and the Tiger·tec Silver coating gives the CPGT09T308-MM4 WSM20S enhanced edge robustness, making it suitable for many interrupted cutting applications when set up correctly. Which series does this cutting grade belong to and what is its benefit? The insert belongs to the Tiger·tec Silver series; its coating technology is designed to extend tool life and maintain cutting-edge integrity in demanding temperature and adhesion conditions. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPGT09T308-MP4 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high cutting performance, optimised chip control and long tool life for efficient turning of steel components. Order the insert via Metav Werkzeuge or consult our technical team for application-specific recommendations. CPGT09T308-MP4 WPP10G — indexable turning insert, coated carbide, rhombic 80° (Walter Tools) The CPGT09T308-MP4 WPP10G is an indexable turning insert designed for productive steel turning, featuring the Tiger·tec Gold coating and an MP4 chipbreaker for reliable chip control. Tiger·tec Gold coating for extended tool life Optimised MP4 chipbreaker for reliable chips Rhombic 80° form with 0.8 mm corner radius Designed for steel applications, high process security Higher productivity through advanced coating technology The Tiger·tec Gold coating combined with the WPP10G grade delivers a balance of wear resistance and toughness that is especially effective when machining steel. This combination reduces flank wear and supports higher cutting speeds, which leads to improved cycle times and lower tool consumption. The result is a measurable gain in process efficiency and predictable tool life in series production, making the insert a pragmatic choice for demanding turning operations. Consistent surface finish and chip formation under load The MP4 chipbreaker is engineered for dependable chip control when cutting typical steel grades; paired with the rhombic 80° geometry and the 0.8 mm corner radius, it produces short, manageable chips and supports steady cutting forces. This leads to a consistent surface finish and easier swarf handling at the machine. The ground relief angle of 11° assists in reducing cutting edge stress, helping to avoid premature chipping and maintaining dimensional accuracy across repeated indexing operations. Reliable integration into turning toolholders and workflows Designed as a T-format insert with tolerance class G, the component offers repeatable seating and easy indexing in standard turning toolholders. The coated carbide body and proven geometry simplify tool selection and reduce setup time in mixed-production environments. For applications requiring consistent performance on steel, the insert provides a straightforward route to stabilise machining processes and lower rework rates. For further machining parameters or compatibility checks, Metav Werkzeuge can supply cutting data and application guidance. Contact Metav Werkzeuge to discuss the Walter Tools CPGT09T308-MP4 WPP10G insert for steel turning and to arrange delivery or technical advice. Technical data SKU: CPGT09T308-MP4-WPP10G-WALTER Item designation: CPGT09T308-MP4 ISO designation: CPGT09T308-MP4 WPP10G Brand: Walter Tools Facts Corner radius: 0.8 mm Relief angle: 11° Insert size: 09 Thickness: T3 Special features Series: Tiger·tec Gold Grade: WPP10G Chipbreaker: MP4 Plate form: Rhombus 80° Execution: T Tolerance class: G Material group suitability: P (steel) Coated carbide insert FAQ What materials is the insert intended for? The CPGT09T308-MP4 WPP10G insert is optimised for machining steel (material group P) and is engineered to handle the typical heat and chip formation encountered when turning unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP10G grade improves wear resistance and thermal stability, which extends tool life and allows for higher cutting speeds compared with uncoated grades. Which chip control behaviour can be expected from the MP4 chipbreaker? The MP4 chipbreaker produces reliable, short chips when turning steel, simplifying swarf management and contributing to a consistent surface finish during continuous production runs. Is the insert compatible with standard turning toolholders? Yes, the rhombic 80° form and T-format design are compatible with many standard turning toolholders; the tolerance class G ensures repeatable seating and indexing. What impact does the 0.8 mm corner radius have on machining? A 0.8 mm corner radius balances edge strength and surface finish, providing improved tool robustness while maintaining acceptable tolerances on external profiles and shoulders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for descriptive purposes only and do not imply any affiliation. The offered article is an original, factory-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com