CPGT09T308-MP4 WPP20G MP4 Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold technology and the WPP20G grade for consistent, long-lasting performance in Stahl turning operations; the insert's MP4 chipbreaker and rhombic 80° geometry ensure stable chip control and reliable surface quality. Order the CPGT09T308-MP4 WPP20G insert directly via Metav Werkzeuge or consult our specialists for application guidance. CPGT09T308-MP4 WPP20G — Turning insert with Tiger·tec Gold coating, for Stahl | Walter Tools A CPGT09T308-MP4 WPP20G turning insert engineered for productive roughing and finishing of Stahl, combining a wear-resistant coating with a geometry optimised for consistent chip control. Tiger·tec Gold coating for extended tool life Optimised chipbreaker MP4 for consistent chip control Rhombic 80° shape for versatile turning applications 11° relief angle and 0.8 mm corner radius Productive machining of Stahl with a coated grade The combination of the WPP20G grade and the Tiger·tec Gold coating targets the thermal and mechanical demands of machining Stahl. Designed for typical heat generation and chip formation when cutting unalloyed and alloyed materials of ISO group P, this coated carbide delivers predictable wear behaviour. The result is improved process stability and fewer unexpected tool changes, which supports continuous production and reduces overall machining interruptions. Greater durability and lower tooling cost per part The surface treatment and substrate selection provide enhanced resistance to abrasive and adhesive wear. With the Tiger·tec Gold technology, flank and crater wear are delayed, extending the effective life of the insert and lowering the cost per component. This means longer intervals between indexings and replacements, contributing to measurable savings on repeat operations and increasing machine availability across production shifts. Geometry that secures surface finish and chip evacuation The MP4 chipbreaker, in conjunction with the rhombic 80° form and a 0.8 mm corner radius, produces controlled chip segmentation and redirection away from the cutting zone. The 11° relief angle reduces rubbing on the flank face and supports a cleaner cutting action. Together these geometry elements enhance surface integrity and reduce built-up edge, which is especially advantageous during medium to heavy cuts in diverse Stahl grades. Integration into turning processes and recommended use The insert designation CPGT09T308-MP4 identifies a compact plate with a T3 thickness and a size corresponding to 09, making it suitable for a wide range of toolholders that accept this geometry. As a member of the Tiger·tec Gold series, the CPGT09T308-MP4 WPP20G insert is primarily specified for Stahl applications and offers a balance between wear resistance and toughness for reliable performance in production turning. For further application specifications or to confirm compatibility with a particular holder or machining scenario, Metav Werkzeuge supplies targeted advice and technical data. Contact Metav Werkzeuge for tailored application support or to confirm availability of the Walter Tools CPGT09T308-MP4 WPP20G turning insert for Stahl machining Technical Data SKU: CPGT09T308-MP4-WPP20G-WALTER Article designation: CPGT09T308-MP4 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Core data Relief angle: 11° Corner radius: 0.8 mm Insert size: 09 Plate thickness: T3 Special features Coating: Tiger·tec Gold Grade: WPP20G Chipbreaker: MP4 Plate form: Rhombus 80° Execution: T Material group: P (suitable for Stahl) FAQ What materials is this insert designed for? The CPGT09T308-MP4 WPP20G insert is specified for machining materials in ISO group P and is optimised for Stahl applications, covering a wide range of unalloyed and alloyed steels. How does the MP4 chipbreaker affect cutting performance? The MP4 chipbreaker promotes reliable chip segmentation and evacuation, improving process stability and helping to maintain consistent surface finish during medium to heavy turning operations. Which geometry features support surface quality? The combination of the rhombic 80° shape, 0.8 mm corner radius and 11° relief angle reduces flank contact and supports a steady cutting action, which contributes to improved surface integrity. Is the Tiger·tec Gold coating suitable for high-temperature cutting conditions? Yes, the Tiger·tec Gold coating is developed to withstand the thermal and mechanical stresses typical in turning Stahl, delaying wear mechanisms and extending service life. What does the designation CPGT09T308-MP4 indicate? The code denotes the insert family, size (09), thickness (T3), geometry (rhombic 80° with 0.8 mm corner radius) and the MP4 chipbreaker; combined with the grade WPP20G it provides a clear specification for tool selection. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
CPGW050204FS-1 WDN10 W - Wendeplatten - Walter Tools
Take advantage of the WDN10 PKD grade and the precision rhombic 80° geometry to extend tool life and improve finish in demanding non‑ferrous applications; the low corner radius and dedicated chipbreaker ensure stable chip control and consistent results. Order or request application advice via Metav Werkzeuge for a reliable supply chain and machining consultation. CPGW050204FS-1 WDN10 – PKD indexable insert for drilling, boring and turning (Walter Tools) The CPGW050204FS-1 WDN10 is a PKD indexable cutting insert designed for machining abrasive, non‑ferrous materials in drilling/boring and turning operations, offering high wear resistance and predictable performance. PKD grade WDN10 for abrasive non‑ferrous materials Rhombic 80° geometry for versatile mounting 11° clearance angle for secure chip flow 0.4 mm corner radius for fine surface finish High wear resistance for abrasive non‑ferrous work The insert uses polycrystalline diamond (PKD) in the WDN10 grade, a cutting material that is highly wear‑resistant and suited to abrasive, non‑ferrous workpieces. Because PKD combines hardness with thermal stability, tool life is extended and dress intervals are reduced, which raises overall machining efficiency. The result is fewer tool changes and a more predictable production rhythm for series machining of aluminium alloys, copper alloys and other abrasive non‑ferrous materials. Geometry engineered for stable cutting and chip control The rhombic 80° geometry, combined with an 11° clearance angle and a defined chipbreaker 1, creates a balance between cutting edge strength and efficient chip evacuation. The modest 0.4 mm corner radius supports fine finishing passes while maintaining edge stability during interrupted or plunging operations. For those unfamiliar with the terms: the clearance angle prevents rubbing behind the cutting edge, and the chipbreaker directs chips away from the workpiece to reduce rework and downtime. Productivity benefits in typical production environments In production settings where repeatability and surface quality matter, this insert delivers measurable advantages: reduced cycle time through extended edge life, consistent surface finish owing to the small corner radius, and improved process reliability due to the PKD cutting grade. The insert is suitable for both drilling/boring and turning toolholders where a rhombic 80° insert is specified, enabling consolidation of tool inventories and simpler tool selection for multi‑operation cells. Quality, compatibility and safe application Tolerance class G and the Walter series designation indicate industrial standard tolerances and material lineage; the insert is offered as part of the Walter Schneidstoffsorte series. Material specification is listed as catalog‑dependent, so compatibility with a specific workpiece and machining parameters should be verified against the product matrix. Where uncertainty exists, the insert’s properties—PKD, geometry and chip control—make it a strong candidate for abrasive non‑ferrous machining, but final selection should follow a short test cut to confirm optimal feeds and speeds. Contact Metav Werkzeuge for tailored application advice and availability of the CPGW050204FS-1 WDN10 insert; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: CPGW050204FS-1-WDN10-WALTER SKU / UID: CPGW050204FS-1-WDN10-WALTER Designation: CPGW050204FS-1 WDN10 Facts Clearance angle: 11° Corner radius: 0.4 mm Insert size code: 05 Thickness code: 02 Tolerance class: G Special features Cutting grade: PKD (polycrystalline diamond) WDN10 Geometry: Rhombic 80° Chipformer / chipbreaker: 1 Series: Walter Schneidstoffsorte - Serie offen Material: Katalogabhängig FAQ What materials is this insert intended for? The CPGW050204FS-1 WDN10 insert is designed primarily for abrasive, non‑ferrous materials; the WDN10 PKD grade is optimised for such workpieces and is commonly used on aluminium alloys, copper alloys and other abrasive non‑ferrous substrates. How does the rhombic 80° geometry affect mounting options? Rhombic 80° geometry provides versatile mounting and stable cutting engagement; the shape suits holders specified for 80° rhombic inserts and allows the CPGW050204FS-1 WDN10 to be used across drilling, boring and turning applications where that geometry is required. What benefit does the 0.4 mm corner radius bring? A corner radius of 0.4 mm supports improved surface finish during finishing passes while still maintaining edge robustness; it reduces the risk of chipping on interrupted cuts compared with very small radii. Is the PKD grade suitable for steel or stainless operations? PKD (WDN10) is primarily intended for non‑ferrous and abrasive non‑ferrous materials; its properties are not generally optimal for steel or rostfreier Stahl machining, so steel applications should be evaluated with a suitable carbide or coated carbide alternative. Where can machining parameters and compatibility be confirmed? Compatibility and recommended cutting data should be checked against the manufacturer’s product matrix; for specific cutting parameters and application support, contact Metav Werkzeuge or consult the Walter Tools technical documentation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Mention of brand names and protected designations is for explanatory purposes only; no affiliation is implied. The offered article is an original, factory‑new product of the listed manufacturer.
CPGW060204FS-1 WDN10 Wendeplatten - Walter Tools
Take advantage of the PKD wear resistance and the precise Rhombic 80° geometry for consistent, low-wear machining of abrasive non-ferrous materials; order directly via Metav Werkzeuge or consult our specialists for application guidance. CPGW060204FS-1 WDN10 – PKD indexable insert for drilling and turning, Rhombic 80° (Walter Tools) A CPGW060204FS-1 WDN10 indexable cutting insert engineered for hard-wearing performance in the machining of non-ferrous and abrasive materials. PKD cutting material for abrasive non-ferrous workpieces Rhombic 80° geometry for flexible tool engagement 11° clearance angle for reliable chip formation 0.4 mm corner radius for improved surface finish Long life and repeatable performance with polycrystalline diamond The combination of PKD (polycrystalline diamond) as the cutting material and a purpose‑designed geometry delivers exceptionally high wear resistance when machining abrasive, non‑ferrous workpieces. This insert is built for extended tool life and repeatable results under demanding conditions, reducing the need for frequent index changes and supporting continuous production cycles. The construction supports stable cutting edges and predictable tool change intervals, which contributes to lower overall machining costs. Geometry that improves chip control and surface quality Thanks to the Rhombic 80° shape, a 0.4 mm corner radius and an 11° clearance angle, the insert provides controlled cutting engagement and consistent chip formation. The integrated chipbreaker promotes efficient evacuation of chips while the geometry helps maintain a stable cutting edge, resulting in better surface quality and fewer secondary operations. Tolerance class G ensures dimensional consistency across batches, supporting high repeatability in series production. Productivity benefits through reduced downtime and clear material focus As an indexable insert designed for demanding tasks, this component simplifies tool handling and replacement in standard toolholders. The WDN10 grade offers a modern PKD solution for abrasive non‑ferrous materials, helping to extend machining intervals and lower overall tooling consumption. When material compatibility or cutting data are unclear, the product matrix should be consulted to confirm suitability for the specific workpiece; Metav Werkzeuge can assist with precise selection and cutting parameters. Application range and handling recommendations This PKD insert is intended primarily for non‑ferrous and other abrasive, non‑ferrous workpieces where conventional carbide tools wear prematurely. It is not intended for machining ferrous materials due to the nature of diamond‑based cutting materials. For each application the cutting material, geometry and machine capability must be matched; checking the product matrix and specifying the correct insert designation ensures optimal results and process security. For tailored application advice and immediate availability of the Walter Tools PKD insert, contact Metav Werkzeuge—our consultants will advise on suitability and supply options at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: CPGW060204FS-1-WDN10-WALTER Article designation: CPGW060204FS-1 WDN10 Manufacturer: Walter Tools Facts Clearance angle: 11° Corner radius: 0.4 mm Insert shape: Rhombic 80° Insert size: 06 Thickness: 02 Tolerance class: G Special features Cutting material: PKD (polycrystalline diamond) Grade: WDN10 Chipbreaker: 1 Series: Walter Schneidstoffsorte - Serie offen Execution: W Material: Catalog-dependent FAQ Which materials are suitable for this PKD insert? The CPGW060204FS-1 WDN10 insert is intended for non‑ferrous and other abrasive, non‑ferrous workpieces; suitability should be verified in the product matrix for the specific material. Is the insert suitable for machining steel or stainless steel? No, PKD cutting materials such as the WDN10 grade are not recommended for ferrous materials due to adverse chemical and thermal interactions between diamond and iron. What are the key geometric specifications of the insert? The insert features a Rhombic 80° shape, 0.4 mm corner radius, 11° clearance angle, size 06, thickness 02 and tolerance class G. Is a coating specified for this insert? A dedicated coating is not indicated; the primary cutting material is PKD (polycrystalline diamond) as stated in the product data. What chip control features are included? The insert is supplied with chipbreaker 1, designed to support controlled chip formation for the targeted application range. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer.
CPGW09T304FS-1 WDN10 Wendeplatten - Walter Tools
Take advantage of the combination of polycrystalline diamond (PCD) wear resistance and the precise Rhombic 80° geometry for efficient, reliable machining of abrasive non‑ferrous materials; order the insert directly via Metav Werkzeuge or consult its specialists for application support. CPGW09T304FS-1 WDN10 – PCD turning/boring indexable insert, Rhombic 80° form, Walter Tools A CPGW09T304FS-1 WDN10 turning and boring indexable insert designed for high‑wear applications in non‑ferrous and abrasive non‑ferrous materials, offering the rigidity and edge stability required for precision metalcutting. PKD grade for abrasive non‑ferrous materials Rhombic 80° form for versatile mounting 11° relief for secure cutting geometry 0.4 mm corner radius for fine edge finish Higher productivity through PCD wear resistance The insert is manufactured in the WDN10 grade based on polycrystalline diamond (PCD), which provides exceptional wear resistance in abrasive, non‑ferrous materials. This material composition reduces flank wear and extends tool life compared with conventional carbide grades, enabling longer uninterrupted runs and fewer indexings. For production environments that prioritise throughput, the result is a measurable reduction in operating interruptions and tooling costs while maintaining consistent dimensional accuracy. Stable cutting geometry for better surface quality A Rhombic 80° form combined with an 11° relief and a 0.4 mm corner radius delivers a secure cutting edge and predictable chip flow. The geometry supports both turning and boring set‑ups where a robust seating and clearance angle are essential for process stability. The modest corner radius aids in achieving a fine surface finish without compromising edge strength, and the tolerance class G ensures interchangeability and repeatable positioning in toolholders. These design choices translate into fewer reworks and a more dependable finish for precision components. Clear application scope and practical guidance This insert is optimised for machining non‑ferrous metals and abrasive non‑ferrous alloys; suitability should be confirmed against the specific product matrix for each application. The built‑in chipbreaker 1 helps manage chips in typical cutting regimes for these materials, while the T3 thickness provides the rigidity needed for light to medium cutting depths. If the precise material grade or process parameters are unclear, Metav Werkzeuge’s technical team can assist with recommended feeds, speeds and holder selection to align the insert with the production goal and machine capability. For precision PCD applications select Walter Tools inserts such as the CPGW09T304FS-1 WDN10 and contact Metav Werkzeuge for tailored technical advice or a quotation via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: CPGW09T304FS-1-WDN10-WALTER Designation: CPGW09T304FS-1 WDN10 Type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Facts Relief angle: 11° Corner radius: 0.4 mm Insert form: Rhombus 80° Insert size: 09 Thickness: T3 Chipbreaker: 1 Tolerance class: G Special features Grade: WDN10 (polycrystalline diamond / PCD) Material: catalogue‑dependent Series: Walter Schneidstoffsorte - Serie offen Application suitability: non‑ferrous and abrasive non‑ferrous materials Recommended use: turning and boring operations FAQ What materials is this insert intended for? The CPGW09T304FS-1 WDN10 insert is intended primarily for non‑ferrous metals and abrasive non‑ferrous alloys; the WDN10 PCD grade is optimised for such applications. How does the PCD grade affect tool life? The WDN10 polycrystalline diamond construction significantly increases wear resistance compared with carbide, which extends the service life of the CPGW09T304FS-1 WDN10 insert under abrasive cutting conditions. Which geometric features improve surface finish? The Rhombic 80° form together with the 0.4 mm corner radius and 11° relief contribute to a stable cutting edge and improved surface finish when using the Walter Tools insert. Where to get help selecting cutting parameters? Metav Werkzeuge can provide application‑specific guidance for the CPGW09T304FS-1 WDN10 insert, including recommended feeds and speeds, toolholder selection and process optimisation. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for explanation only; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
CPGW09T308FS-1 WDN10 WDN10 Wendeplatten - Walter Tools
Take advantage of the high wear resistance of a PKD cutting edge combined with precise geometry for reliable chip control and long tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific cutting data. CPGW09T308FS-1 WDN10 indexable insert – PKD grade, Rhombus 80° by Walter Tools The CPGW09T308FS-1 WDN10 is an indexable insert engineered for abrasive, non-ferrous materials and hard, abrasive composites where polycrystalline diamond offers superior wear resistance and surface quality PKD grade WDN10 for abrasive non-ferrous materials Rhombus 80° form with 0.8 mm corner radius 11° clearance angle for consistent chip control T3 thickness for stable cutting performance Outstanding wear resistance and predictable tool life The core advantage of this insert is its polycrystalline diamond (PKD) cutting edge, supplied in the WDN10 grade, which offers outstanding wear resistance when machining abrasive, non-ferrous materials. The CPGW09T308FS-1 WDN10 insert converts that material property into operational benefits: longer intervals between regrinds, fewer interrupted cycles, and improved surface finish on high-value components. PKD is especially effective on abrasive aluminium-silicon alloys, graphite-filled plastics and certain composites, providing both dimensional stability and a reduced risk of built-up edge during continuous production. Precision geometry that stabilises cutting and chip evacuation Designed with a Rhombus 80° plate form and a 0.8 mm corner radius, the insert balances edge strength with cutting sharpness. The modest radius supports repeatable edge condition under load while the 11° clearance angle reduces rubbing and promotes predictable chip flow. These geometric parameters result in lower cutting forces and more consistent tool performance, which in turn aid process reproducibility on CNC turning and boring operations. The T3 thickness enhances seat stability, reducing microvibration for improved component tolerances. Application guidance for efficient integration in production This insert is intended for applications in abrasive, non-ferrous materials; verify suitability against the required component matrix before series production. The integrated chipbreaker 1 geometry helps fragmentation under typical feed and speed ranges for PKD tooling, contributing to stable machining and reduced cycle times. As a practical step, pair the insert with rigid toolholders and moderate depths of cut to exploit the PKD edge while avoiding shock loads. Process data trials are recommended to determine the optimal combination of feed, speed and coolant strategy for the specific workpiece material. Reliability and brand credentials that support shopfloor confidence Walter Tools is recognised for engineered solutions that combine accurate geometry with tailored cutting materials. The WDN10 grade in the Walter range emphasises stable chip formation and broad applicability across abrasive non-ferrous workpieces, making it a reliable choice for high-value production runs. Choosing a PKD insert from a reputable line reduces process variability and supports consistent surface quality — a moral and economic benefit for manufacturers prioritising first-time-right parts. Contact Metav Werkzeuge for tailored cutting parameters, availability and a quotation for the Walter Tools CPGW09T308FS-1 WDN10 insert Technical data Article number: CPGW09T308FS-1-WDN10-WALTER Designation: CPGW09T308FS-1 WDN10 Manufacturer: Walter Tools Facts Free angle: 11° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 09 Thickness: T3 Chipbreaker: 1 Tolerance class: G Execution: W Special features Cutting material: polycrystalline diamond (PKD), grade WDN10 Material base: Katalogabhängig Series: Walter Schneidstoffsorte - Serie offen Intended use: abrasive, non-ferrous materials and abrasive composites Note: Verify workpiece compatibility with product matrix FAQ What materials is this insert best suited for? The CPGW09T308FS-1 WDN10 insert uses a PKD cutting edge optimised for abrasive, non-ferrous materials such as aluminium alloys with high silicon content, graphite-filled plastics and certain composites. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius provides a balance between edge strength and cutting sharpness, improving durability while maintaining acceptable surface finish for precision turning and boring operations. Is this insert suitable for interrupted cuts? PKD inserts like the WDN10 grade are sensitive to mechanical shock; the CPGW09T308FS-1 insert performs best in continuous cuts or gently interrupted cuts using rigid setups and conservative entry conditions. Which plate form and angles ensure stable chip control? The Rhombus 80° plate form combined with the 11° clearance angle and chipbreaker 1 geometry supports controlled chip formation and evacuation under typical PKD operating conditions. Can the insert be used on steel or stainless steel? The CPGW09T308FS-1 WDN10 is designed for abrasive non-ferrous materials; PKD is generally unsuitable for steel and stainless steel as edge degradation can occur under the chemical and thermal conditions common to ferrous machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPGW120408FS-1 WDN10 WDN10 Wendeplatten - Walter Tools
Take advantage of the WDN10 PKD grade and the rhombic 80° geometry to secure long tool life and consistent edge performance in abrasive non‑ferrous applications; order directly via Metav Werkzeuge or consult our specialists for process optimisation. CPGW120408FS-1 – CPGW120408FS-1 WDN10 – WDN10 PKD insert for non‑ferrous metals by Walter Tools A CPGW120408FS-1 WDN10 indexable insert designed for drilling, reaming and turning tasks on abrasive non‑ferrous materials and other non‑ferrous metals. Polykristalliner Diamant (PKD) Schneidstoff Rhombus 80° geometry for stable seating 11° clearance for reliable cutting action 0.8 mm corner radius for edge strength Extended tool life through a wear‑resistant cutting grade The primary asset of this insert is its polykristalliner Diamant (PKD) cutting material, indicated by the WDN10 grade. This PKD layer offers markedly higher abrasion resistance than conventional grades, which translates into longer tool life when machining abrasive non‑ferrous materials such as certain aluminium alloys, copper and composite non‑ferrous compounds. For production environments where changeover time and insert cost per component are critical, the PKD grade reduces overall tooling expenditure and the frequency of regrinds, supporting a more efficient machining flow. Geometry engineered for stability and surface quality With a rhombic 80° form and an 11° clearance angle, the insert provides a secure seating and a predictable cutting entry, which helps to control chip flow and minimise vibration. The 0.8 mm corner radius contributes to a robust cutting edge that balances strength and finish: small radii aid in precision grooves and profiling, while still offering enough edge support for interrupted cuts. These geometric choices improve process stability and contribute to a consistent surface finish in serial production. Application focus and process recommendations The combination of PKD grade and the specified geometry makes this indexable insert particularly suited to abrasive non‑ferrous metals and other non‑ferrous materials prone to rapid tool wear. It is important to verify the exact workpiece alloy against the product matrix, as the PKD performance depends on material composition and inclusions. When machining, adopt cutting parameters optimised for PKD—moderate feeds with controlled cutting speeds and appropriate coolant strategies—so that the wear behaviour remains stable and predictable, delivering both productivity and repeatability. Practical handling and integration into tooling systems This insert is supplied in the CPGW120408FS‑1 designation, compatible with standard toolholders designed for rhombic 80° indexable inserts. Its execution and tolerance class support precise positioning and repeatable clamping, which reduces setup time and maintains consistent part tolerances. The WDN10 grade and the open series designation allow straightforward selection for processes demanding high abrasion resistance; check holder compatibility and clamping torque to ensure optimum contact and thermal behaviour during operation. Contact Metav Werkzeuge today for tailored advice on integrating Walter Tools WDN10 PKD inserts into machining processes and to request delivery or tooling recommendations from our application engineers. Technical Data Article number: CPGW120408FS-1-WDN10-WALTER Designation: CPGW120408FS-1 ISO designation: CPGW120408FS-1 WDN10 Grade: WDN10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Execution: W Numbers / Core technical data Free angle: 11° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 12 Plate thickness: 04 Chipbreaker: 1 Tolerance class: G Special features Polykristalliner Diamant (PKD) Material: Katalogabhängig Suited for abrasive non‑ferrous metals Check material suitability against product matrix FAQ What materials is this insert best suited for? The WDN10 grade is a PKD solution intended chiefly for abrasive non‑ferrous metals and other non‑ferrous materials where high abrasion resistance is required. Can this insert be used in standard rhombic 80° toolholders? Yes, the CPGW120408FS‑1 geometry matches standard rhombic 80° indexable insert holders; ensure correct clamping and seating for repeatable results. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength and helps maintain surface quality during interrupted or light finishing cuts, providing a balance between robustness and finish. Is coolant required when machining with this PKD insert? Coolant strategy should be selected based on the workpiece and process; PKD inserts often benefit from controlled cooling or air blast to manage heat and chip evacuation, improving consistency. How should material suitability be verified before production use? Refer to the product matrix and, if necessary, consult Metav Werkzeuge or Walter Tools application data to confirm that the WDN10 PKD grade matches the specific alloy and machining scenario. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original factory‑new product of Walter Tools.
CPMT04T104-MM4 WSM20S WSM20S Wendeplatten - Walter Tools
High-performance indexable insert combining Tiger·tec Silver coating with a robust MM4 chipbreaker delivers stable cutting edges and reliable chip control for stainless steels and heat‑resistant alloys; order the CPMT04T104-MM4 WSM20S directly via Metav Werkzeuge or consult the product specialists for application advice. Drehwendeschneidplatte CPMT04T104-MM4 WSM20S – rhombic 80° insert, Tiger·tec Silver coating, Walter Tools The CPMT04T104-MM4 WSM20S is a rhombic 80° indexable insert designed for turning operations in stainless steels and heat‑resistant superalloys, offering a combination of thermal stability and secure chip control for demanding production environments. Tiger·tec Silver coating for thermal stability MM4 chipbreaker for secure chip control 11° relief angle for reduced cutting forces 0.4 mm corner radius, rhombus 80° form Predictable chip control and extended edge life The Tiger·tec Silver coating together with the MM4 chipbreaker provides a measurable improvement in heat resistance and chip formation, which reduces the risk of built‑up edge when machining ductile, work‑hardening materials. The coating technology increases thermal stability, helping the cutting edge retain its geometry under thermal load; this translates into longer tool life and fewer changeovers, improving throughput and lowering operating costs. The chipbreaker is specifically shaped to direct chips away from the cutting zone, which supports consistent surface finish and safer swarf handling. Geometry optimised for stainless steel and superalloys A combination of an 11° relief angle and a 0.4 mm corner radius in the rhombic 80° form provides a favourable balance between strength and cutting performance when turning stainless steels and heat‑resistant alloys. The moderate corner radius absorbs intermittent loads while maintaining a small contact area for lower cutting forces; this helps avoid workpiece distortion and improves dimensional stability. For shops processing corrosion‑resistant components or aerospace alloys, the insert’s geometry supports stable machining even under stringent tolerances. Reduced downtime through consistent performance The coated carbide grade WSM20S is engineered for applications classified under ISO groups M and S, meaning it is suited to stainless steel and heat‑resistant superalloys/titanium where thermal and abrasive stresses are high. Using this insert reduces the frequency of unexpected tool failures and the associated production stops. The stable cutting edge behaviour contributes to reproducible part quality and predictable tooling costs, allowing production planners to schedule maintenance and tool changes with confidence rather than reacting to premature wear. Choose the Walter Tools Tiger·tec Silver grade for reliable machining of stainless and heat‑resistant alloys — contact Metav Werkzeuge to specify the CPMT04T104-MM4 WSM20S for the application or to request tailored cutting data. Technical data SKU: CPMT04T104-MM4-WSM20S-WALTER Name: Drehwendeschneidplatte CPMT04T104-MM4 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Facts Relief angle: 11° Corner radius: 0.4 mm Plate size: 04 Plate thickness: T1 Plate form: Rhombus 80° Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: MM4 Material: coated carbide Suitable for: stainless steel (M), heat‑resistant alloys and titanium (S) Application: heavy‑to‑machine materials and stainless steel depending on geometry FAQ What materials is this insert intended for? The CPMT04T104-MM4 WSM20S is specified for ISO groups M and S — suitable for stainless steel and heat‑resistant superalloys/titanium when the geometry and cutting data are matched to the workpiece. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver increases thermal stability at the cutting edge, so the Walter Tools insert maintains edge geometry longer and reduces wear rates when machining heat‑generating materials. Which chipbreaker should be selected for continuous turning of ductile stainless grades? The MM4 chipbreaker on this insert is designed for secure chip control during turning of ductile and sticky materials, improving swarf evacuation and surface finish. Can this insert be used for interrupted cuts or roughing operations? Yes — the rhombic 80° form with a 0.4 mm corner radius and the coated grade provide edge robustness that supports interrupted cuts and demanding roughing where thermal and mechanical loads occur. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CPMT04T104-MP4 WPP20G Wendeplatten - Walter Tools
The Tiger·tec Gold grade WPP20G and MP4 chipbreaker deliver a reliable balance of wear resistance and consistent chip control, optimising cycle times for general steel turning; order genuine inserts or consult Metav Werkzeuge for tailored cutting data. CPMT04T104-MP4 WPP20G turning insert (Tiger·tec Gold) for steel — Walter Tools A hard-wearing CPMT04T104-MP4 WPP20G indexable turning insert engineered for universal steel machining with a rhombic 80° geometry and precision edge preparation. Tiger·tec Gold coated carbide grade WPP20G Suitable for steel machining (ISO P) Rhombic 80° insert, 11° clearance, 0.4mm radius Improved process stability for steel machining The combination of Tiger·tec Gold coating and the WPP20G grade provides a durable, coated carbide substrate designed specifically for the thermal and mechanical demands of steel turning. This engineering reduces flank wear and extends tool life under typical turning conditions, resulting in fewer index changes and steadier production. The construction supports predictable tool behaviour, providing a measurable advantage in batch production and single-part runs where consistency is critical. Reliable chip control and superior surface quality The integrated MP4 chipbreaker works with the rhombic 80° geometry to produce controllable chips across a wide range of feeds and depths of cut, helping to prevent entanglement and machine interruptions. With an 11° clearance and a 0.4 mm radius, the cutting edge promotes a fine balance between edge strength and finish capability, delivering improved surface finish and reduced vibration. These features contribute directly to shorter secondary operations and lower scrap rates. Productivity through repeatability and robustness Tolerance class M and robust coating technology combine to provide repeatable performance and predictable wear curves. The specification supports steady tool life and simple tool-change planning, which together reduce downtime and increase overall throughput. As a Walter Tools product, the insert benefits from quality controls aimed at reproducible performance, making it suitable for production environments where uptime and consistency underpin competitiveness. Practical application notes and compatibility Designed for machining steels classified under ISO P, the insert’s geometry and cutting-edge design suit a variety of turning tasks from light finishing to medium roughing when paired with appropriate toolholder geometry. The 04 size and T1 thickness allow compatibility with common toolholder systems for rhombic 80° inserts; consult tooling catalogues or Metav Werkzeuge for holder matching and suggested cutting data. The insert’s chipforming characteristics are particularly advantageous when machining long or interrupted cuts where controlled swarf evacuation is required. For specific cutting-data recommendations, toolholder compatibility or to source original Walter Tools inserts, contact Metav Werkzeuge for expert advice and customised support. Technical data SKU: CPMT04T104-MP4-WPP20G-WALTER Article designation: CPMT04T104-MP4 WPP20G Manufacturer: Walter Tools Product type: Turning insert Key numerical data Clearance angle: 11° Corner radius: 0.4 mm Insert size: 04 Thickness: T1 Tolerance class: M Design and special features Tiger·tec Gold coating, WPP20G grade MP4 chipbreaker Rhombic 80° plate shape Suitable for steel (ISO P) FAQ What materials is this insert suited to? The CPMT04T104-MP4 WPP20G is formulated for machining steels (ISO P); the WPP20G grade is optimised for the heat and chip characteristics typical of steel turning. How does the MP4 chipbreaker affect operation? The MP4 chipbreaker on this Walter Tools insert promotes short, controlled chips, which reduces the risk of entanglement and supports stable machining cycles with improved surface quality. What does the 0.4 mm corner radius mean for part finish? A 0.4 mm radius increases edge strength while still enabling good surface finish; it is suitable for mixed finishing and medium stock removal, offering a compromise between robustness and fine finish. Is the insert compatible with standard holders for rhombic 80° inserts? Yes; the insert’s rhombic 80° form and 04 size match widely used toolholders for this geometry—verify holder compatibility and clamping style with Metav Werkzeuge or the toolholder supplier. How does Tiger·tec Gold coating benefit productivity? Tiger·tec Gold enhances wear resistance and thermal stability, leading to more consistent tool life and reduced index changes, which supports higher machine utilisation and predictable production planning. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPMT050204-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the FM4 chipbreaker for reliable machining of stainless steel; the rhombic 80° geometry with an 11° relief angle ensures consistent surface quality and economic tool life. Order directly via Metav Werkzeuge or consult our specialists for cutting data and optimisation. CPMT050204-FM4 WMP20G — Indexable insert (Rhombus 80°, for stainless steel) | Walter Tools The CPMT050204-FM4 WMP20G is an indexable insert engineered for turning and drilling operations in stainless steels, combining a coated carbide grade with an FM4 chipbreaker for stable chip formation under medium to robust conditions Tiger·tec Gold coating for extended tool life Optimised FM4 chip control for stainless steel Rhombic 80° geometry for versatile machining 11° relief angle reduces rubbing and heat build-up Increased uptime through advanced coating technology The insert’s Tiger·tec Gold technology provides a multi-layer coating specifically developed to resist the typical wear mechanisms encountered when machining stainless steel. By stabilising the cutting edge and reducing adhesion, the coating supports a longer tool life and fewer interruptions for index changes. For production environments this translates into improved process stability and a lower cost per component thanks to longer time between tool changes and consistent part quality. Secure chip control and improved surface finish The FM4 chipbreaker is tuned to the characteristics of materials in the ISO M group; it encourages short, controllable chips and reduces the risk of built-up edge that commonly affects stainless steels. This leads to a more predictable cutting process, better thermal management at the cutting zone and a more reliable surface finish, especially on critical components where repeatability is essential. Operators benefit from fewer interruptions and easier chip evacuation in both turning and light boring tasks. Geometry designed for strength and flexibility The Rhombus 80° shape combined with a 0.4 mm corner radius and an 11° relief angle balances edge strength with accessibility for machining operations. The geometry allows for both robust cuts and fine finishing passes while maintaining consistent contact conditions between insert and workpiece. As a result, the component quality remains high and tool indexing can be scheduled less frequently, supporting efficient batch production and predictable machining cycles. For tailored cutting data, batch availability and expert recommendations on Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance Technical data SKU: CPMT050204-FM4-WMP20G-WALTER Article designation: CPMT050204-FM4 Full designation: CPMT050204-FM4 WMP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WMP20G Facts Relief (free) angle: 11° Corner radius: 0.4 mm Plate form: Rhombus 80° Size code: 05 Thickness code: 02 Special features Chipbreaker: FM4 Coating technology: Tiger·tec Gold Applicable material group: ISO M (stainless steel) Carbide: coated cemented carbide Application: turning and light boring operations FAQ What materials is this insert suitable for? The CPMT050204-FM4 WMP20G is designed primarily for stainless steel (ISO M) applications and performs well under medium to robust cutting conditions. How does the FM4 chipbreaker influence machining? The FM4 chipbreaker promotes short, controlled chips when machining stainless steel, improving chip evacuation and reducing the likelihood of built-up edge on the insert. Can the insert withstand interrupted cuts and tougher conditions? The combination of the Tiger·tec Gold coating and the rhombic 80° geometry provides enhanced edge stability, making the insert tolerant of variable cutting conditions and intermittent cuts. Is the insert compatible with standard CPMT toolholders? Yes, the CPMT050204-FM4 indexable insert is compatible with holders that accept CPMT-style rhombic 80° inserts; check the holder’s manufacturer data for confirmation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used here for clarification only. The offered article is an original, factory-new product of the manufacturer.
CPMT050204-FM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of consistent chip control, long edge life and straightforward integration for dependable stainless steel turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for application guidance. CPMT050204-FM4 WMP20S – Rhombic 80° turning insert, FM4 chipbreaker (Walter Tools) The CPMT050204-FM4 WMP20S is a rhombic 80° indexable turning insert optimised for stainless steel machining and medium to robust cutting conditions. Tiger‑tec Silver coating for reliable edge life FM4 chipbreaker for stable chip formation 11° clearance angle for smooth cutting Rhombic 80° form with 0.4 mm corner radius Consistent chip control and predictable tool life The combination of the WMP20S grade and the FM4 chipbreaker delivers controlled chip formation when machining stainless steel, reducing interruptions and improving machining security. The coated carbide substrate of the Tiger‑tec Silver series supports thermal stability and wear resistance under higher cutting temperatures, which helps to maintain a stable cutting edge over longer tool life. This results in fewer index changes and more consistent cycle times on turning centres and CNC lathes. Geometry tuned for surface quality and repeatability The rhombic 80° geometry with a 0.4 mm corner radius and an 11° clearance angle provides a balance between strength and accessibility in turning applications. The insert form allows secure engagement in shoulder and profile turning while the modest corner radius supports predictable surface finish without excessive cutting forces. The insert thickness and size coding ensure compatibility with standard toolholders designed for CPMT‑style chips, enabling straightforward tool setup and repeatable results across batches. Practical integration and economic processing Belonging to the Tiger‑tec Silver family, this coated indexable insert is designed for stainless steel under medium to robust conditions and aims to deliver high process reliability and stable chip control. The product’s specification supports productive machining by reducing unplanned downtime and simplifying tool inventory through a versatile grade selection. Where process security and surface quality are priorities, the insert provides a technically clear and cost-effective solution for serial production and single‑part machining alike. Contact Metav Werkzeuge for tailored cutting parameters and application advice on Walter Tools inserts; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: CPMT050204-FM4-WMP20S-WALTER Designation: CPMT050204-FM4 WMP20S Manufacturer: Walter Tools Core dimensions Clearance angle: 11° Corner radius: 0.4 mm Insert size: 05 Thickness code: 02 Special features Coating: Tiger‑tec Silver Grade: WMP20S Chipbreaker: FM4 Geometry: Rhombic 80° Material suitability: stainless steel Substrate: coated carbide Brand: Walter Tools FAQ What materials is this insert suited for? The CPMT050204-FM4 WMP20S insert from Walter Tools is intended primarily for machining stainless steel under medium to robust conditions, offering controlled chip formation and good edge stability. Which chipbreaker is fitted and why does it matter? This insert uses the FM4 chipbreaker; the FM4 geometry promotes stable chip formation and evacuation, which is especially beneficial when machining tough, ductile stainless steels. How does the Tiger‑tec Silver coating influence performance? The Tiger‑tec Silver coating on the WMP20S grade improves thermal resistance and wear behaviour, helping the Walter Tools insert maintain cutting-edge integrity and reduce index changes during longer cycles. Is the insert compatible with standard CPMT toolholders? Yes, the CPMT050204-FM4 form matches standard CPMT‑style toolholders; the rhombic 80° profile and coded size permit straightforward integration into common turning tool systems. What surface finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius provides a compromise between strength and finish, delivering consistent surface quality on turned parts while maintaining adequate edge robustness for stainless steel applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPMT050204-FM4 WSM20S FM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WSM20S grade and the FM4 chipbreaker to secure consistent machining of stainless steels and heat-resistant alloys; the result is dependable edge life and stable chip formation for uninterrupted production. Order original Walter Tools inserts directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. CPMT050204-FM4 WSM20S — Indexable insert for drilling and turning, Tiger·tec Silver, Walter Tools the CPMT050204-FM4 WSM20S indexable insert for drilling/enlargement and turning provides a robust solution for hard-to-machine stainless steels and superalloys Tiger·tec Silver coating for extended wear resistance WSM20S grade optimised for stainless and superalloys FM4 chipbreaker for stable chip control Rhombus 80° geometry for secure entry and versatility Reliable performance with high-temperature alloys and stainless steels The combination of a coated carbide grade and a modern chipbreaker yields measurable production benefits: consistent edge stability and reduced tool changes. The WSM20S grade, part of the Tiger·tec Silver family, is designed to resist the thermal and adhesive stresses typical of ISO group M (rostfreie Stähle) and S (heat-resistant superalloys and titanium). This results in improved process security and more predictable tool life, which in turn increases productivity and lowers the risk of unplanned downtime. The coating enhances wear resistance while maintaining cutting-edge integrity under elevated temperatures. Geometry and chip control that protect the component surface A well‑matched geometry directly affects surface finish and dimensional repeatability. The rhombus 80° form together with an 11° relief angle and a 0.4 mm corner radius provides a controlled cutting engagement and reduced vibration during interrupted or entry cuts. The FM4 chipbreaker is tuned for reliable chip shaping and evacuation, lowering the chance of built-up edge and minimising rework. For turning and bore‑enlargement operations, this geometry supports stable tool paths, contributing to consistent part quality and reduced cycle variability. Practical application guidance and process benefits Use this insert for operations demanding thermal stability and secure chip formation: medium‑to‑high cutting speeds in stainless steels and when machining nickel‑ or cobalt‑based alloys. The robust grade and chip control reduce flank wear and edge chipping, translating into longer intervals between re‑grinds or insert changes. Where surface integrity and repeatability are critical, the Tiger·tec Silver technology delivers both tool life and process reliability, supporting leaner setups and higher first‑pass yields. Contact Metav Werkzeuge for tailored application advice and to secure original Walter Tools CPMT050204-FM4 WSM20S inserts with Tiger·tec Silver technology Technical data Article number: CPMT050204-FM4-WSM20S-WALTER SKU: CPMT050204-FM4-WSM20S-WALTER Designation: CPMT050204-FM4 WSM20S Manufacturer: Walter Tools Dimensions & angles Relief angle: 11° Corner radius: 0.4 mm Shape: Rhombus 80° Size code: 05 Thickness code: 02 Tolerance class: M Materials & special features Grade: WSM20S (Tiger·tec Silver) Chipbreaker: FM4 Series: Tiger-tec Silver Applications: ISO M and S (rostfreie Stähle, superalloys/titanium) Execution: T Base material codes: S / M FAQ Which materials are recommended for this insert? The CPMT050204-FM4 WSM20S insert is intended for ISO group M (rostfreie Stähle) and ISO group S (heat‑resistant superalloys and titanium), where its coating and grade resist high temperatures and adhesive wear. What benefits does the Tiger·tec Silver treatment provide? Tiger·tec Silver on the WSM20S grade increases wear resistance and thermal stability, improving edge life and maintaining cutting performance under demanding conditions. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on this insert promotes consistent chip formation and evacuation, reducing the risk of built‑up edge and supporting stable surface finish and dimensional control. What does the rhombus 80° geometry mean for setup choices? Rhombus 80° geometry offers versatile entry angles for indexing in common toolholders, enabling secure engagement for both turning and bore‑enlargement operations while balancing cutting forces. Is this insert suited to interrupted cuts and entry operations? Yes, the combination of the 11° relief, 0.4 mm corner radius and the FM4 chipbreaker provides robustness for interrupted cuts and secure entry, lowering the probability of edge chipping. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered product names are cited solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer, Walter Tools.
CPMT050204-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from high wear resistance and reliable chip control combined with precise geometry for efficient steel turning; order directly via Metav Werkzeuge or consult their specialists for application guidance. CPMT050204-FP4 WPP10G – Turning / Boring Indexable Insert, Tiger·tec Gold (Walter Tools) The CPMT050204-FP4 WPP10G is a rhombic 80° coated carbide insert designed for steel turning and boring, providing consistent chip formation and extended tool life. Tiger·tec Gold coating for high wear resistance WPP10G grade optimised for steel machining Rhombus 80° geometry for versatile turning 11° clearance and 0.4 mm corner radius for strength and finish Boosted tool life through advanced coating and grade The combination of the Tiger·tec Gold coating with the WPP10G grade delivers a clear productivity advantage when machining steels. The coated carbide construction resists abrasive wear and thermal softening, which lengthens indexable insert life and reduces changeover frequency. For production environments this means fewer interruptions and lower tooling costs per component. The specification targets ISO group P (steel) materials, so the insert is set up for the heat and chip behaviour typical of unalloyed and alloyed steels; the result is improved process stability and predictable tool performance. Geometry engineered for reliable chip control and surface quality The rhombus 80° form, paired with the FP4 chipbreaker, offers a balance between accessibility and cutting edge strength that suits turning and light boring tasks. A clearance angle of 11° helps avoid rubbing at the flank, while the 0.4 mm corner radius supports a superior surface finish without compromising edge robustness. The FP4 chipbreaker is designed to shape and break chips effectively during continuous turning, which reduces the risk of long stringy chips and supports automated machining. These geometric choices translate into consistent part quality and fewer downstream rework operations. Practical application and process advantages in everyday production As an indexable insert for turning and boring, this item integrates into common turret and toolholder systems, offering rapid replacement and predictable repeatability. The plate thickness and form ensure stable clamping and resistance to edge chipping under normal cutting parameters. Being optimised for steel according to machining class P, the insert is suitable for a wide range of workshop applications from batch production to repro runs. The measurable benefits include reduced tool consumption, stable cycle times and more consistent finished dimensions, supporting a smoother production flow and higher overall equipment effectiveness. Choose the Walter Tools Tiger·tec Gold CPMT050204-FP4 WPP10G for dependable steel machining and contact Metav Werkzeuge for availability and tailored application advice. Technical data Article number: CPMT050204-FP4-WPP10G-WALTER Designation: CPMT050204-FP4 WPP10G Manufacturer / Brand: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Facts Geometry: Rhombus 80° Clearance angle: 11° Corner radius: 0.4 mm Size designation: 05 Plate thickness designation: 02 Tolerance class: M Materials & special features Coating: Tiger·tec Gold Substrate: Coated carbide (hardmetal) Chipbreaker: FP4 Primary application: Steel (ISO P) Execution code: T FAQ Which materials is this insert suitable for? The CPMT050204-FP4 WPP10G is optimised for machining steels (ISO group P) and is designed to handle the typical heat and chip formation associated with unalloyed and alloyed steels. What advantage does the Tiger·tec Gold coating bring? Tiger·tec Gold improves resistance to abrasive wear and thermal loading, extending tool life and maintaining cutting-edge integrity for longer runs with the Walter Tools insert. How does the FP4 chipbreaker perform in continuous turning? The FP4 chipbreaker produces compact, controlled chips that reduce the risk of entanglement and support consistent surface finish and reliable automated machining. Is the geometry suitable for finishing operations? The rhombus 80° form with a 0.4 mm corner radius and 11° clearance provides a balance of edge strength and finish capability, making the insert appropriate for a range of finishing and semi-finishing tasks. Can this insert be used in standard toolholders and turrets? Yes, the indexable design and standard designation enable straightforward integration into common turning toolholders for rapid changeovers and repeatable results. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names belong to their respective owners. The brand name Walter Tools is mentioned for product identification and explanation only. There is no affiliation implied between Metav Werkzeuge and the trademark owners. The offered article is an original, factory-new product of the manufacturer.
CPMT060204-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of high process security, targeted chip control and Tiger‑tec Gold wear resistance for reliable turning of stainless steels; order via Metav Werkzeuge or consult our specialists for precise application advice. CPMT060204-FM4 WMP20G indexable turning insert – Rhombus 80°, 11° clearance | Walter Tools The CPMT060204‑FM4 WMP20G is an indexable turning insert designed for robust finishing and medium‑duty machining of stainless steels, featuring Tiger‑tec Gold coated carbide and an FM4 chipbreaker for consistent chip formation Tiger‑tec Gold coated grade WMP20G Designed for stainless steel machining Rhombus 80° geometry, 11° clearance FM4 chipbreaker for stable chips Reliable machining performance for stainless steels The CPMT060204‑FM4 WMP20G insert is engineered to deliver consistent cutting performance in demanding stainless steel applications. The coated carbide grade provides improved wear resistance under the high temperatures and adhesive tendencies of austenitic and martensitic stainless steels. By combining a purpose‑built chipbreaker with a robust substrate, the insert reduces the risk of built‑up edge and uncontrolled chip formation, which in turn stabilises the cutting process and extends tool life. This results in fewer interruptions, more predictable cycle times and improved component quality. Geometry that enhances stability and surface quality The Rhombus 80° insert form and an 11° clearance angle create a balanced cutting geometry that supports both light finishing and moderate roughing operations. The modest corner radius (0.4 mm) helps achieve a fine surface finish while providing enough edge strength to withstand micro‑impacts. The insert’s dimensions (size 06, thickness 02) ensure compatibility with common toolholders for turning operations. Together, these geometric attributes improve dimensional control and contribute to a consistently good surface finish on turned parts. Controlled chips, reduced rework and easier process setup Chip control is a decisive factor when machining stainless steels; the FM4 chipbreaker promotes short, manageable chips under typical cutting conditions for the M material class. Predictable chip shapes simplify coolant management and workpiece handling, lowering the likelihood of scratching or entanglement. With a coating from the Tiger‑tec Gold family, the insert supports higher productivity by maintaining a stable cutting edge for longer periods, reducing downtime for insert changes and helping keep production flowing. Practical advantages for workshop integration Specifying this insert streamlines tool inventory: the standard CPMT060204‑FM4 geometry fits many established toolholders and clamping systems, simplifying logistics for maintenance or production planning. The WMP20G grade is optimised for stainless steel behaviour, offering a good compromise between wear resistance and edge toughness for everyday turning tasks. For customers seeking reproducible results and straightforward indexable insert management, this component offers a reliable baseline for both manual and CNC turning operations. Contact Metav Werkzeuge for tailored recommendations on integrating the Walter Tools Tiger‑tec Gold CPMT060204‑FM4 WMP20G insert into production; call +49 2822 7131930 or eMail info@metav-werkzeuge.com for specimen selection and cutting data advice Technical data SKU: CPMT060204-FM4-WMP20G-WALTER Article: CPMT060204-FM4 WMP20G Manufacturer: Walter Tools Core technical data Plate size: 06 Plate thickness: 02 Clearance angle: 11° Corner radius: 0.4 mm Tolerance class: M Special features Chipbreaker: FM4 Grade: WMP20G Series: Tiger‑tec Gold Geometry: Rhombus 80° Material application: stainless steel FAQ What materials is this insert suitable for? The CPMT060204‑FM4 WMP20G is designed primarily for stainless steel applications (material group M) and performs well under the typical heat and adhesion challenges of those alloys. How does the Tiger‑tec Gold coating benefit the cutting process? The Tiger‑tec Gold coating improves wear resistance and helps maintain a stable cutting edge, which supports longer tool life and more consistent surface quality in stainless steel turning. What does the FM4 chipbreaker deliver in practice? The FM4 chipbreaker produces short, controllable chips in many stainless steel turning scenarios, reducing the risk of chip entanglement and easing workpiece handling. Is this insert compatible with standard CPMT toolholders? Yes; the CPMT form and dimensions are compatible with conventional toolholders designed for CPMT‑type indexable inserts. Can Metav Werkzeuge provide cutting data for roughing and finishing operations? Yes; Metav Werkzeuge offers application support and can advise on cutting speeds, feeds and depth of cut tailored to the WMP20G grade and specific stainless steel alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand name: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation; there is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
CPMT060204-FM4 WMP20S WMP20S Wendeplatten - Walter Tools
High process reliability for stainless steel machining is achieved through the combination of the Tiger‑tec Silver coating and the WMP20S grade; the 11° clearance angle and 0.4 mm corner radius support stable cutting and consistent chip formation. Order the CPMT060204‑FM4 WMP20S directly via Metav Werkzeuge or ask our consultants for application guidance. CPMT060204-FM4 WMP20S — indexable turning insert with Tiger‑tec Silver coating (Walter Tools) The CPMT060204‑FM4 WMP20S is an indexable turning insert developed for reliable machining of stainless steel in medium to robust cutting conditions, combining a proven chipbreaker with a compact Rhombus 80° geometry. Tiger‑tec Silver coating for process security WMP20S grade for stainless steel machining FM4 chipbreaker for consistent chip control 11° clearance and 0.4 mm corner radius Stable chip control that keeps production running The combination of the FM4 chipbreaker with a coated carbide grade provides predictable chip formation even when machining tough, ductile alloys. This geometry reduces the risk of built‑up edge and frequent interruption, which results in fewer tool changes and more predictable cycle times. The Tiger‑tec Silver coating contributes to heat resistance and lower friction at the cutting edge, thereby promoting a stable cutting zone and extended service intervals for the insert. Designed for stainless steel and demanding turning tasks The insert grade WMP20S is tuned for stainless steel applications and moderate to heavy duty operations. Its coating and substrate are balanced to resist thermal softening and to maintain a robust cutting edge under the typical high temperatures and work‑hardening tendencies of austenitic steels. This makes the product suitable for operations where consistent surface quality and tool life are necessary to meet production targets. Geometry and edge preparation for precise, repeatable results The compact Rhombus 80° shape and the specified 11° clearance angle combine to offer good approach angles and reliable seat stability in standard toolholders. The 0.4 mm corner radius supports a favourable edge strength while still allowing controlled material removal for finishing passes. The insert’s form and thickness code deliver rigidity and predictable engagement, which helps to reduce vibration and to secure repeatable dimensional accuracy in serial turning. Contact Metav Werkzeuge for tailored application advice on the Walter Tools CPMT060204‑FM4 WMP20S and to secure availability for production runs Technical data Article number: CPMT060204-FM4-WMP20S-WALTER Designation: CPMT060204-FM4 WMP20S Product type: indexable turning insert Numbers / Core technical data Clearance angle: 11° Corner radius: 0.4 mm Insert size: 06 Thickness code: 02 Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WMP20S Chipbreaker: FM4 Shape: Rhombus 80° Series: Tiger‑tec Silver Suitable for: stainless steel Manufacturer: Walter Tools FAQ What materials is this insert suited for? The CPMT060204‑FM4 WMP20S is optimised for stainless steel machining; the WMP20S grade and Tiger‑tec Silver coating support secure chip formation and edge stability when working with austenitic and other stainless grades. How does the FM4 chipbreaker influence performance? The FM4 chipbreaker promotes consistent, segmented chips that are easier to evacuate from the cutting zone, improving process reliability and reducing the risk of built‑up edge during longer cuts. What benefits does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating reduces friction and improves thermal resistance at the cutting edge, helping to extend insert life and maintain surface quality under higher temperatures typical for stainless steel turning. Which edge geometry should be expected for finishing or roughing? This insert offers a 0.4 mm corner radius and a 11° clearance angle, which balance edge strength and surface finish; the Rhombus 80° form allows flexible approach angles for both finishing and medium stock removal. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
CPMT060204-FM4 WSM20S FM4 Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WSM20S grade to achieve stable cutting performance in stainless steel and heat‑resistant alloys; the FM4 chipbreaker and a 0.4 mm corner radius ensure reliable chip control and edge strength for demanding turning and boring tasks. Order directly via Metav Werkzeuge or consult the specialists for application support. CPMT060204-FM4 WSM20S — Indexable insert for drilling/bore and turning, Tiger·tec Silver, FM4 chipbreaker — Walter Tools The CPMT060204-FM4 WSM20S is a rhombic 80° indexable insert designed for productive machining of stainless steel and heat‑resistant superalloys in demanding turning and boring applications Tiger·tec Silver coating for thermal robustness WSM20S grade for stainless steel and superalloys FM4 chipbreaker for reliable chip control 0.4 mm corner radius for improved edge stability Increased process efficiency through coating and grade selection The combination of the Tiger·tec Silver coating with the WSM20S carbide grade is engineered to extend tool life under high temperatures and adhesive wear typical of stainless steel and nickel‑based alloys. The coating raises thermal resistance and reduces friction at the cutting edge, which in turn supports consistent cutting forces and extended productive time between index changes. For production environments seeking predictable cycle times, this insert reduces machining interruptions and contributes to a more economical throughput. Predictable chip control and surface quality for stable operations Equipped with the FM4 chipbreaker and a rhombic 80° geometry, the insert provides controlled chip formation and reliable evacuation, particularly in narrow grooves or interrupted cuts. The 0.4 mm corner radius increases edge strength and helps resist breakouts during heavier depths of cut, while the 11° clearance angle supports low rubbing and improved surface finish. These characteristics combine to lower the risk of built‑up edge and help achieve a consistent surface quality on components made from stainless steel and heat‑resistant materials. Practical selection and application advice for workshop use The insert’s designation and size code simplify toolholder matching and inventory management: the plate format and thickness codes are standardised for straightforward integration with common toolholders. The WSM20S grade is particularly suitable where secure chip formation and stable cutting edges are required; when tackling highly heat‑generating operations, this grade and the coating offer an advantageous balance between wear resistance and edge toughness. For setup, refer to toolholder manufacturer recommendations and adjust feeds and speeds conservatively when first testing a new batch. Contact Metav Werkzeuge for tailored application recommendations and to secure Tiger·tec Silver WSM20S inserts for stainless steel and superalloy machining Technical data Article number: CPMT060204-FM4-WSM20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CPMT060204-FM4 WSM20S Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Facts Corner radius: 0.4 mm Clearance angle: 11° Plate form: Rhombus 80° Plate size code: 06 Plate thickness code: 02 Tolerance class: M Special features Chipbreaker: FM4 Coating: Tiger·tec Silver Material groups: S / M Suitable for: stainless steel Execution code: T FAQ What materials is this insert suitable for? The WSM20S grade with Tiger·tec Silver coating is intended primarily for stainless steel and heat‑resistant superalloys; the insert supports secure chip formation and thermal stability in these groups. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker promotes short, controllable chips and reliable evacuation, which improves process stability when using the CPMT060204-FM4 WSM20S insert in turning and boring operations. What is the benefit of the 0.4 mm corner radius? A 0.4 mm corner radius increases edge strength and reduces the likelihood of chipping during heavier cuts, contributing to longer edge life and steadier surface quality. Which toolholders match the rhombic 80° form? Rhombic 80° inserts fit toolholders designed for CPMT‑type geometries; confirm the holder is specified for a CPMT060204 form and the corresponding thickness code before assembly. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names are used for explanation only. There is no connection between our company and the named brands. The offered article is original factory‑new goods of the manufacturer. Walter Tools is mentioned as the product brand.
CPMT060204-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Gold coating and the WPP10G grade for productive, reliable steel machining; the rhombic 80° geometry with a 0.4 mm corner radius provides consistent surface quality and process stability. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. CPMT060204-FP4 WPP10G — CPMT060204-FP4 indexable insert, Tiger‑tec Gold, for steel — Walter Tools A CPMT060204‑FP4 WPP10G indexable insert engineered for high‑productivity steel machining, combining a Tiger‑tec Gold coated grade with a tailored chipbreaker and rhombic 80° geometry. Tiger‑tec Gold coating for long tool life Optimised FP4 chipbreaker for stable chips Rhombic 80° form with 0.4 mm corner radius Suitable for machining steel (ISO P) Maximise productivity with a coated high‑performance grade The combination of Tiger‑tec Gold and the WPP10G grade delivers a coated carbide solution tuned for the thermal and mechanical demands of steel cutting (ISO P). The multilayer coating reduces flank and crater wear, extending effective tool life and allowing higher cutting data without compromising process reliability. For production environments this means fewer tool changes, higher throughput and a demonstrable improvement in overall equipment efficiency. The technical design of the grade emphasises wear resistance while maintaining toughness for a broad range of steel applications. Achieve stable chip control and consistent surface finish An FP4 chipbreaker paired with a Rhombic 80° form provides controlled chip formation and evacuation, reducing the risk of built‑up edge and improving surface quality. The small 0.4 mm corner radius supports modest finishing passes while the 11° clearance promotes secure cutting engagement and consistent cutting forces. For operators this geometry translates into reliable process windows, fewer interruptions and improved reproducibility across batches. The chipbreaker design is explained for clarity: it shapes and fractures the chip so that evacuation is predictable, which is particularly important when machining medium to heavy steel sections. Versatile indexable geometry for industrial applications As an indexable insert, the CPMT060204‑FP4 format (size 06, thickness 02) is suitable for a range of toolholders used in drilling and turning operations, simplifying tool management and reducing inventory complexity. The insert’s tolerance class M supports standard industrial fitments and repeatable indexing. Compatibility with ISO P materials makes it a practical choice for general engineering workshops and subcontractors aiming for a balance between productivity and tool economy. The insert’s design supports stable machining strategies, making it appropriate for series production as well as one‑off precision jobs where process security and surface integrity matter. For high‑productivity steel machining with Walter Tools’ Tiger‑tec Gold grade, contact Metav Werkzeuge for tailored application advice or to secure stock — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: CPMT060204-FP4-WPP10G-WALTER Name: CPMT060204-FP4 WPP10G Product type: Indexable insert (drilling/turning) Brand: Walter Tools Facts Clearance angle: 11° Corner radius: 0.4 mm Insert size: 06 Thickness: 02 Tolerance class: M Special features Coating/grade: Tiger‑tec Gold, WPP10G Chipbreaker: FP4 Insert shape: Rhombic 80° Material application: Steel (ISO P) Execution: T FAQ What materials is this insert suitable for? The CPMT060204‑FP4 WPP10G insert from Walter Tools is designed primarily for steel machining (ISO P), with the WPP10G grade and Tiger‑tec Gold coating optimised for the heat and chip formation typical of steels. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker creates predictable chip shapes and improved evacuation, which helps maintain surface quality and reduces interruptions during continuous machining with the Walter Tools CPMT060204‑FP4. Can this insert be used for finishing passes? Yes, the 0.4 mm corner radius supports finishing operations where modest radii are required; combined with the rhombic geometry it balances edge strength and surface integrity for Walter Tools’ insert solutions. Which insert size and thickness are specified? The indexable insert is supplied in size 06 with a thickness of 02, matching common toolholder interfaces for drilling and turning applications in industrial settings. Is the coating suitable for high‑speed cutting? The Tiger‑tec Gold coating on the WPP10G grade improves wear resistance and thermal stability, enabling elevated cutting parameters in many steel machining scenarios while maintaining tool life for the Walter Tools insert. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the trademark owners. The offered article is an original, factory‑new product of the manufacturer.
CPMT060204-MM4 WSM20S WSM20S Wendeplatten - Walter Tools
Benefit from the Tiger·tec Silver coating and the MM4 chipbreaker for longer tool life and stable chip control when machining stainless steel and high-temperature alloys; order the insert directly via Metav Werkzeuge or consult our specialists for cutting-data support. CPMT060204-MM4 WSM20S – indexable turning insert, Tiger·tec Silver coating, for stainless steel and superalloys | Walter Tools The CPMT060204-MM4 WSM20S is a rhombic 80° indexable turning insert with Tiger·tec Silver coating, designed for secure cutting in stainless steel and heat-resistant superalloys. Tiger·tec Silver coating for long tool life MM4 chipbreaker for stable chip control Rhombic 80° form with 11° free angle Optimised for stainless steel and superalloys Longer tool life through advanced coating technology The combination of the Tiger·tec Silver platform and the WSM20S grade delivers enhanced wear resistance and thermal stability in continuous and interrupted cuts. The multilayer coated carbide resists adhesion and flank wear, which reduces the frequency of tool changes and supports consistent cycle times. For workshops machining stainless steel or other demanding materials, this translates into predictable tool life and fewer process interruptions, increasing overall productivity. Consistent chip control and improved surface quality The MM4 chipbreaker geometry is engineered to produce manageable chips across a range of cutting depths, contributing to safer chip evacuation and a more reliable process. The rhombic 80° insert form combined with a 0.4 mm corner radius supports a good balance between edge strength and surface finish, enabling stable passes and reduced rework. Clear explanation: a chipbreaker shapes the chips to prevent long, entangling swarf and to lower heat concentration at the cutting edge. Suited to high-demand materials and difficult-to-machine alloys This insert grade is tuned for the challenges of machining materials in the ISO groups M and S: stainless steel (austenitic and other stainless grades) and heat-resistant superalloys or titanium, which generate high temperatures and strain the cutting edge. The coating and grade chemistry aim to maintain edge integrity under thermal load, supporting secure cutting even where built-up edge or rapid wear would otherwise occur. The result is greater process security and consistent tolerances in serial production. Process recommendations for reliable results The 11° free angle and tolerance class M help to reduce flank rubbing while maintaining cutting stability; the insert execution T supports standard clamping systems. For best results, ensure a rigid toolholder and appropriate coolant strategy to manage temperatures when machining stainless steel or superalloys. The insert’s geometry and chip control are particularly beneficial for semi-finishing and finishing operations where surface quality and repeatability matter most. Contact Metav Werkzeuge for a tailored cutting-data consultation and ordering support for Walter Tools Tiger·tec Silver inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CPMT060204-MM4-WSM20S-WALTER Designation: CPMT060204-MM4 WSM20S Type: Indexable turning insert Facts Free angle: 11° Corner radius: 0.4 mm Insert size: 06 Plate thickness: 02 Tolerance class: M Special features Tiger·tec Silver coating, WSM20S grade MM4 chipbreaker geometry Rhombic 80° insert form Suitable for stainless steel and high-temperature alloys Series: Tiger-tec Silver Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The CPMT060204-MM4 WSM20S insert is suitable for stainless steel and heat-resistant superalloys (ISO groups M and S), with the WSM20S grade optimised for thermal stability and reliable chip control. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker on the CPMT060204-MM4 promotes short, controllable chips and reduces the risk of long swarf, improving safety and surface quality during turning. What does the 0.4 mm corner radius mean for finishing? A 0.4 mm corner radius provides a compromise between edge strength and surface finish: it supports fine finishes while maintaining robustness against edge chipping in interrupted cuts. Which coating technology is applied to this insert? The insert uses the Tiger·tec Silver coating system; this multilayer coating enhances wear resistance and reduces adhesion on the cutting edge during operations in stainless steel and similar alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, brand-new product of Walter Tools.
CPMT060204-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a proven MP4 chipbreaker and precise geometry for consistent, productive turning; order genuine Walter Tools inserts via Metav Werkzeuge or consult our specialists for process-matched recommendations. CPMT060204-MP4 CPMT060204-MP4 WPP20G – turning indexable insert, Tiger·tec Gold, for steel by Walter Tools The CPMT060204-MP4 WPP20G is a coated carbide turning insert designed for reliable, high-productivity steel machining in general turning applications. Tiger·tec Gold coating for wear resistance Optimised MP4 chipbreaker for stable chips 80° rhombic form for versatile turning 11° clearance, 0.4 mm corner radius Higher productivity through coating and chip control The combination of the Tiger·tec Gold coating and a coated carbide substrate delivers extended tool life and stable cutting under typical steel machining conditions. The MP4 chipbreaker is engineered to produce controllable, short chips in a wide range of cutting parameters, which reduces interruptions and downstream handling. Because the grade is classified for ISO group P, the insert handles the heat and chip formation typical of unalloyed and alloyed steel, improving process reliability and reducing unplanned tool changes. Geometry that improves surface quality and repeatability A rhombic 80° shape with an 11° clearance and a 0.4 mm corner radius combines flexibility with defined cutting behaviour: the geometry allows both general turning and finishing passes while supporting consistent tool engagement and predictable wear patterns. The tolerance class M ensures dimensional repeatability for predictable mounting and runout behaviour, which helps maintain surface finish and dimensional accuracy across production batches. Application scope and practical advantages at the machine This insert is specified for steel machining (ISO group P) and is suitable for a wide variety of turning operations where a balance between wear resistance and toughness is required. The WPP20G grade is a universal option within the Tiger·tec Gold family, offering productive material removal rates and a broad workpiece range. Its form and chip control reduce cycle interruptions and simplify process setup, making it an efficient choice for mixed-production environments and OEM machining where consistent output and tool life are priorities. Contact Metav Werkzeuge for genuine Walter Tools turning inserts and tailored machining advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CPMT060204-MP4-WPP20G-WALTER Designation: CPMT060204-MP4 WPP20G Product type: Drehwendeschneidplatte (turning indexable insert) Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Execution: T Facts Corner radius: 0.4 mm Clearance angle: 11° Shape: Rhombus 80° Size code: 06 Thickness code: 02 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: MP4 Material application: steel (ISO group P) Robust universal grade for a broad material range Optimised for reliable chip control and productivity FAQ What materials is this insert intended for? The CPMT060204-MP4 WPP20G insert is specified for machining steel (ISO group P); the WPP20G grade and Tiger·tec Gold coating are matched to the thermal and chip formation characteristics of steel. Which chipbreaker does the insert use and what is its benefit? The insert features the MP4 chipbreaker; this chip geometry promotes short, controllable chips and helps maintain uninterrupted production in turning operations. Can this insert be used for finishing passes? Yes — the rhombic 80° geometry combined with a 0.4 mm corner radius provides the versatility to perform finishing as well as general turning cuts, maintaining surface quality and dimensional stability. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating increases wear resistance and thermal stability on the coated carbide substrate, which typically extends tool life and supports higher material removal rates in steel machining. Is the insert compatible with standard CPMT toolholders? The CPMT form and tolerance class M are designed to be compatible with conventional CPMT toolholder systems; correct seating and clamping ensure repeatable performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
CPMT060208-MK4 WKK20S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WKK20S grade for reliable performance in cast‑iron turning; the MK4 chipbreaker and Rhombus 80° geometry ensure controlled chips and consistent surface quality. Order directly via Metav Werkzeuge or request advice from our specialists for the optimal toolholder and cutting data. CPMT060208-MK4 WKK20S indexable turning insert – Tiger‑tec Silver, for cast iron, Walter Tools The CPMT060208-MK4 WKK20S is a rhombic, 80° indexable insert designed for productive turning of cast iron components, fitted with a MK4 chipbreaker and the Tiger‑tec Silver coating for extended tool life. High wear resistance for cast iron cutting Tiger‑tec Silver coating for improved process stability Rhombus 80° form for versatile turning applications MK4 chipbreaker for predictable chip control Accurate chip control tailored to cast iron cutting The coated carbide grade, WKK20S, is engineered specifically for abrasive cast‑iron workpieces. The combination of the Tiger‑tec Silver coating and the MK4 chipbreaker reduces flank wear and adapts to the characteristic short, brittle chips of grey and nodular cast iron. This yields more predictable machining cycles and longer tool life, which supports higher uptime in series production. The technical design tackles the most common cause‑and‑effect chain in cast‑iron turning: abrasive wear → surface degradation → reduced component consistency. Stable geometry for reproducible turning results Rhombus 80° geometry with a clearance angle of 11° and a corner radius of 0.8 delivers a balanced edge strength and surface finish. The insert’s format and tolerance class M contribute to repeatable seating in standard toolholders, so set‑up variation is reduced. For workshops seeking dependable component tolerances, the insert’s form minimises chatter and supports consistent dimensional outcomes, making it suitable for batch production where reproducibility matters. Seamless integration into existing tool systems The insert size and thickness codes (plate size 06, thickness 02) match common holder systems, enabling easy replacement without major process changes. The coated, PVD/CVD‑style technology within the Tiger‑tec Silver family provides a robust protective layer that improves edge stability at typical turning speeds for cast iron. Process planners benefit from a straightforward selection logic: the grade targets cast iron (material group K), the chipbreaker promotes safe chip evacuation, and the plate form fits conventional toolholders, simplifying tool inventory management. Practical advantages that support productivity Selecting this insert supports a cost‑efficient machining strategy through reduced insert changes and less scrap due to surface defects. The design focuses on one primary benefit per argument: wear resistance for abrasive materials, and controlled chips for safer, uninterrupted operation. Technical purchasers will appreciate the clear allocation to cast‑iron applications and the compatibility with established turning systems, allowing the insert to be adopted with minimal qualification effort. For an application review or to order the Walter Tools CPMT060208-MK4 WKK20S, contact Metav Werkzeuge for tailored advice and delivery options via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CPMT060208-MK4-WKK20S-WALTER SKU: CPMT060208-MK4-WKK20S-WALTER Designation: CPMT060208-MK4 Grade: WKK20S Series: Tiger‑tec Silver Facts Clearance angle: 11° Corner radius: 0.8 Plate size: 06 Plate thickness: 02 Shape: Rhombus 80° Tolerance class: M Special features Chipbreaker: MK4 Coating: Tiger‑tec Silver (coated carbide) Material suitability: cast iron (K) Execution: T Application focus: turning of cast‑iron materials FAQ Is this insert suitable for grey and nodular cast iron? Yes. The CPMT060208-MK4 WKK20S from Walter Tools is formulated for cast‑iron machining and is optimised for the abrasive wear and short, breaking chips typical of these materials. What advantages does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WKK20S grade enhances edge stability and wear resistance, improving process reliability and extending the interval between index changes. Which chipbreaker is fitted and what is its benefit? The MK4 chipbreaker is integrated to promote consistent chip formation and evacuation, reducing the risk of entanglement and supporting uninterrupted turning cycles. Can this insert be used in standard toolholders for 80° rhombic plates? Yes. The Rhombus 80° form and standard size coding (06/02) allow the insert to be mounted in commonly used turning holders with compatible seatings. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPMT060208-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating together with the WPP20G carbide grade and the MP4 chipbreaker to secure steady material removal and long tool life. Order the CPMT060208‑MP4 WPP20G insert via Metav Werkzeuge or consult our specialists for machining advice and process optimisation. CPMT060208‑MP4 WPP20G indexable turning insert — Tiger‑tec Gold, for Stahl (Walter Tools) The CPMT060208‑MP4 WPP20G is an indexable turning insert engineered for general Stahl applications, combining durable Tiger‑tec Gold coating with an MP4 chipbreaker to deliver predictable chip control and reliable performance. Tiger‑tec Gold coating for extended tool life WPP20G grade — versatile for Stahl machining Rhombus 80° insert with 11° clearance MP4 chipbreaker for controllable chips Consistent productivity from a modern coated grade The insert’s Tiger‑tec Gold coating and the WPP20G composition are geared towards productive machining of Stahl where thermal loads and typical chip forms must be managed reliably. Coated cemented carbide provides improved wear resistance compared with uncoated grades, which translates into fewer indexings and longer intervals between tool changes. For production environments seeking repeatable cycle times, the combination of a robust coating and a universal grade offers a measurable uplift in process stability and overall throughput. Geometry that supports precision and surface quality The Rhombus 80° shape, paired with a corner radius of 0.8 mm and an 11° clearance angle, reduces radial cutting forces and helps maintain dimensional accuracy during turning. The inserted edge tolerance class M supports consistent part-to-part results and simplifies setup verification. Such geometry also aids in achieving a good surface finish with moderate feeds, making the insert suitable for both roughing and finishing passes when stability is ensured. Clear specification of the geometry helps planners select appropriate holders and minimise trial-and-error at the machine. Controlled chip formation for safer operations The MP4 chipbreaker is designed to produce shorter, controllable chips when machining Stahl, reducing the risk of entanglement and improving evacuation from the cut. Reliable chip control reduces interruptions and supports unattended or semi-automated processes. Where coolant and flow are applied correctly, the MP4 pattern also contributes to more uniform flank wear, extending useful cutting life and supporting predictable reconditioning or replacement cycles. Practical application and handling recommendations Assigned to ISO group P, this insert is intended primarily for Stahl machining across a broad hardness and alloy range. The designation CPMT060208‑MP4 describes a compact 06 size insert with a 02 thickness suitable for many standard toolholders. For best results, match insert geometry and clamping rigidity to the workpiece and machine dynamics; stable setups and correct holder selection maximise the benefits of the coating and chipbreaker. Routine monitoring of wear and adherence to recommended feeds and speeds will maintain performance and help plan economical tool usage. For application guidance on Walter Tools Tiger‑tec Gold inserts such as the CPMT060208‑MP4 WPP20G, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a machining consultation and confirm availability Technical data Article number: CPMT060208-MP4-WPP20G-WALTER Name: Drehwendeschneidplatte / indexable turning insert Item designation: CPMT060208-MP4 WPP20G Series: Tiger‑tec Gold Grade: WPP20G Manufacturer: Walter Tools Numbers / Core technical data Clearance angle: 11° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Tolerance class: M Designs / Special features Chipbreaker: MP4 Coating: Tiger‑tec Gold (coated cemented carbide) Material application: P (Stahl) Execution code: T FAQ What materials is this insert suitable for? The CPMT060208‑MP4 WPP20G insert is designed for ISO group P — in other words for machining various types of Stahl where Tiger‑tec Gold provides improved wear resistance. Which chipbreaker is integrated and what benefit does it bring? This insert features the MP4 chipbreaker, which promotes short, controllable chips and supports safer chip evacuation and longer tool life in Stahl turning operations. How does the Rhombus 80° shape affect use? The Rhombus 80° geometry offers a balanced compromise between access and strength, enabling stable turning operations and good edge engagement for a range of feeds. Is the grade suitable for both roughing and finishing? Yes, the universal character of the WPP20G grade allows use across roughing and moderate finishing when combined with appropriate feeds, speeds and a rigid setup. What information identifies this exact item on orders? Order by the SKU CPMT060208‑MP4‑WPP20G‑WALTER or the ISO designation CPMT060208‑MP4 WPP20G to ensure the correct Tiger‑tec Gold insert is supplied. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
CPMT09T304-FM4 WMP20G T Wendeplatten - Walter Tools
Take advantage of a durable, Tiger‑tec Gold coated cutting edge combined with the FM4 chipbreaker and a rhombic 80° geometry for reliable machining of rostfreier Stahl; order directly via Metav Werkzeuge for swift delivery or consult our specialists for application advice. CPMT09T304‑FM4 WMP20G — Turning/Boring Indexable Insert, Tiger‑tec Gold coating, FM4 chipbreaker | Walter Tools The CPMT09T304‑FM4 WMP20G is a rhombic 80° indexable turning and boring insert engineered for consistent performance when machining rostfreier Stahl in medium to robust conditions Tiger‑tec Gold coating for extended tool life Optimised FM4 chipbreaker for stable chip control Rhombic 80° form with 0.4 mm corner radius 11° relief angle for secure cutting and finish Longer runtimes and predictable results through optimised coating and substrate The combination of the Tiger‑tec Gold coating with a coated cemented carbide substrate gives this insert a high resistance to wear and thermal loading, which directly improves tool life and reduces interruption for tool changes. In practice, the hard, multi‑layered coating lowers adhesion and built‑up edge when facing the high toughness of rostfreier Stahl, while the substrate maintains a robust cutting edge under interrupted or heavy cuts. For production environments, this translates into fewer tool‑related stops and more consistent part quality. Precise chip control and surface finish from geometry and chipbreaker design The FM4 chipbreaker and the rhombic 80° shape are designed to produce manageable chips and stable cutting conditions. The moderate 0.4 mm corner radius supports a balance between edge strength and surface quality, helping to avoid chatter while delivering acceptable finishes. The listed 11° relief angle reduces flank contact and improves the cutting action in tougher materials; in simple terms, the geometry reduces friction at the cutting edge and helps to maintain dimensional accuracy over longer runs. Application focus: rostfreier Stahl machining with process reliability Designed primarily for rostfreier Stahl, the insert offers reliable performance in typical turning and boring tasks under medium to robust conditions. The coated carbide grade is tuned to resist edge breakdown and promote a steady chip flow, aiding consistent cycle times and repeatable results. For shops aiming to increase throughput or standardise tooling, this insert supports predictable tool life and easier process parameter setting, which can speed up ramp‑up and reduce scrap rates. For tailored advice on Walter Tools Tiger‑tec Gold inserts or to reserve the CPMT09T304‑FM4 WMP20G for rostfreier Stahl applications, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: CPMT09T304‑FM4‑WMP20G‑WALTER Designation: CPMT09T304‑FM4 WMP20G Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Relief angle: 11° Corner radius: 0.4 mm Insert size: 09 Plate thickness: T3 Plate form: Rhombus 80° Tolerance class: M Special features Coated cemented carbide (Tiger‑tec Gold) Chipbreaker: FM4 Suitable for rostfreier Stahl Moderate corner radius for balance of strength and finish Designed for medium to robust machining conditions FAQ What materials is this insert suitable for? The CPMT09T304‑FM4 WMP20G from Walter Tools is specifically designed for machining rostfreier Stahl and performs well under medium to robust cutting conditions. How does the FM4 chipbreaker affect performance? The FM4 chipbreaker on the CPMT09T304‑FM4 WMP20G promotes stable chip formation and evacuation, improving process reliability and reducing the risk of built‑up edge when machining rostfreier Stahl. What benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold coating increases wear resistance and reduces adhesion on the cutting edge of the CPMT09T304‑FM4 WMP20G, which extends tool life and supports consistent surface quality. Is the 0.4 mm corner radius suitable for finishing operations? The 0.4 mm corner radius is a compromise between edge robustness and surface finish; the CPMT09T304‑FM4 WMP20G can be used for achieving acceptable finishes while maintaining edge strength for interrupted cuts. Which insert geometry helps with secure cutting action? The rhombic 80° form combined with an 11° relief angle on the CPMT09T304‑FM4 WMP20G reduces flank contact and enhances cutting stability, aiding dimensional control. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPMT09T304-FM4 WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance, stable chip formation and a compact rhombic geometry for consistent production on rostfreier Stahl—order the CPMT09T304‑FM4 WMP20S insert via Metav Werkzeuge or consult our specialists for process optimisation CPMT09T304‑FM4 WMP20S indexable insert for turning — Tiger‑tec Silver, for rostfreier Stahl — Walter Tools The CPMT09T304‑FM4 WMP20S is a rhombic 80° indexable insert intended for turning and boring tasks, optimised for machining rostfreier Stahl under medium to robust conditions Tiger‑tec Silver coating for improved wear resistance Designed for rostfreier Stahl (material group M) Rhombus 80° geometry for versatile turning 0.4 mm corner radius for reliable edge strength Durable coating that extends tool life and reduces downtime The Tiger‑tec Silver coating combined with the WMP20S grade provides a durable, coated carbide structure designed to withstand the demands of machining rostfreier Stahl. Coatings reduce friction and thermal load at the cutting edge, which in turn lowers the tendency for built‑up edge and premature wear. For production environments this translates into fewer insert changes and longer uninterrupted cutting times, improving overall equipment effectiveness and lowering unit manufacturing costs. The insert’s composition supports stable chip formation, which helps maintain process repeatability in serial turning operations. Geometry tuned for consistent surface quality and edge security The rhombus 80° form and 11° clearance angle combine to deliver a balance between accessibility and edge support. The moderate 0.4 mm corner radius provides a strong edge for interrupted cuts and medium‑depth turning passes while still allowing for acceptable surface finish. The FM4 chipbreaker is designed to control chip flow when working rostfreier Stahl, directing chips away from the cutting zone to reduce rework and tool interference. These geometric choices mean the insert is suitable for a range of turning tasks where robustness and consistent component quality are required. Process advantages: productivity with predictable results Designed for medium to robust cutting conditions, this indexable insert emphasises process security and economic machining. The combination of grade and geometry reduces the risk of edge failure in challenging rostfreier Stahl alloys, so cycle times remain stable and tool change frequency is reduced. Predictable tool life facilitates more accurate planning of production runs and spare‑part inventories. Explaining the term: a chipbreaker like FM4 modifies chip shape and evacuation, lowering the chance of entanglement and minimising manual chip handling in the workshop. Practical handling and integration into existing toolholders With an insert thickness of T3 and size designation 09, the part fits commonly used clamping systems for rhombic 80° inserts, enabling straightforward replacement and indexing in many turning toolholders. The standardised form and secure seat geometry support repeatable positioning and quick index changes, helping maintain tight tolerances on series components. For customers seeking exact cutting data for specific rostfreier Stahl grades, Metav Werkzeuge provides tailored guidance to align speeds, feeds and depth of cut with production goals. Discuss Walter Tools Tiger‑tec Silver inserts with Metav Werkzeuge to determine the optimal WMP20S grade and cutting parameters for rostfreier Stahl applications Technical Data SKU: CPMT09T304‑FM4‑WMP20S‑WALTER Designation: CPMT09T304‑FM4 WMP20S Manufacturer: Walter Tools Facts Free clearance angle: 11° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Plate form: Rhombus 80° Special features Coating: Tiger‑tec Silver Grade: WMP20S Chipbreaker: FM4 Series: Tiger‑tec Silver Material group: M (rostfreier Stahl) Execution: T FAQ What materials is this insert suited for? The CPMT09T304‑FM4 WMP20S insert is specified for material group M and is suitable for machining rostfreier Stahl under medium to robust conditions How does the Tiger‑tec Silver coating help in practice? The Tiger‑tec Silver coating on the WMP20S grade lowers friction and increases thermal resistance, improving wear behaviour and promoting more consistent chip formation when machining rostfreier Stahl What does the FM4 chipbreaker achieve? The FM4 chipbreaker shapes and controls chips to facilitate clean evacuation and reduce the risk of chip entanglement, supporting safer, more predictable turning operations Can this insert be used for finishing and semi‑finishing? With a 0.4 mm corner radius and rhombus 80° geometry, the insert is suitable for semi‑finishing and many finishing tasks where robust edge strength and reliable surface quality are required Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer (Walter Tools).
CPMT09T304-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WSM20S carbide grade and the FM4 chipbreaker for improved process stability and consistent chip control; order the CPMT09T304-FM4 WSM20S directly via Metav Werkzeuge or consult our technical team for application support. CPMT09T304-FM4 WSM20S — Rhombic 80° indexable insert for stainless steel (Walter Tools) The CPMT09T304-FM4 WSM20S is a rhombic 80° indexable turning and boring insert engineered for demanding machining of stainless steels and heat‑resistant alloys, combining a robust corner profile with a specialised chipbreaker for reliable chip control. Tiger·tec Silver coating technology Optimised FM4 chipbreaker geometry 11° relief for secure cutting edge 0.4 mm corner radius for versatile machining High-performance coating and grade for demanding materials The combination of the Tiger·tec Silver coating and the WSM20S grade provides enhanced thermal stability and improved wear resistance in challenging conditions. This coating system reduces adhesion and helps maintain a stable edge when machining stainless steel and Ni‑base superalloys, which are prone to built-up edge and high cutting temperatures. The result is greater process reliability and longer tool life, translating into fewer interruptions and more consistent production outputs. Precision geometry for stable cutting and chip control Equipped with an FM4 chipbreaker and an 11° relief, the insert promotes controlled chip formation and a secure cutting action. The 0.4 mm corner radius balances edge strength with profile accuracy, making the insert suitable for general turning and finishing passes where a combination of robustness and surface quality is required. The rhombic 80° shape enables a wide range of approach angles, increasing flexibility in toolholder selection and setup. Economic benefits through predictable performance The coated cemented carbide composition and the proven grade concept support durable cutting edges under thermal and mechanical load, reducing the frequency of index changes. For production environments working with stainless or heat‑resistant alloys, this means lower tool consumption and improved uptime. The design is aimed at users seeking stable chip control and reproducible results across batches, delivering tangible efficiency gains in everyday machining tasks. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: CPMT09T304-FM4-WSM20S-WALTER Designation: CPMT09T304-FM4 WSM20S Brand: Walter Tools Series: Tiger·tec Silver Core data Relief angle: 11° Corner radius: 0.4 mm Plate size: 09 Plate form: Rhombic 80° Plate thickness: T3 Tolerance class: M Applications and features Coating: Tiger·tec Silver Grade: WSM20S (coated cemented carbide) Chipbreaker: FM4 Suitable for: stainless steel (M) and heat‑resistant alloys / titanium (S) Typical use: turning / boring indexable insert for demanding materials FAQ What materials is this insert designed for? The CPMT09T304-FM4 WSM20S insert is designed primarily for stainless steel and heat‑resistant superalloys, utilising the WSM20S grade to support secure chip formation and edge stability. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating enhances thermal resistance and reduces adhesion on the cutting edge, which helps to maintain stable performance when machining tough, heat‑generating materials. Which chipbreaker is fitted and what is its benefit? The insert features an FM4 chipbreaker developed for reliable chip control, enabling consistent chips and reduced risk of tangling in turning and boring operations. Can this insert be used for finishing passes? Yes — the 0.4 mm corner radius and rhombic 80° geometry make the insert suitable for a range of finishing and semi‑finishing operations while maintaining edge strength. Is the insert compatible with standard indexable holders? The rhombic 80° form is compatible with common indexable turning and boring holders designed for CPMT‑style inserts; selection of the correct seat and clamp is recommended for optimal performance. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names serves explanatory purposes only; there is no affiliation between our company and the referenced brands. The offered article is an original, brand‑new product from the manufacturer.
CPMT09T304-FP4 WPP10G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and the WPP10G wear resistance for consistent machining of steel; the FP4 chipbreaker and rhombic 80° geometry ensure controlled chips and precise edge life. Order or request application advice via Metav Werkzeuge for process-matched tooling and fast supply. CPMT09T304-FP4 WPP10G rhombic 80° indexable insert for steel machining (Walter Tools) The CPMT09T304-FP4 WPP10G is a rhombic 80° indexable cutting insert engineered for steel turning and drilling-related operations, combining the Tiger·tec Gold coating with an FP4 chipbreaker for stable, productive metalcutting. Tiger·tec Gold coating for long tool life Optimised FP4 chipbreaker for steel machining Rhombic 80° geometry with 0.4 mm corner radius 11° relief angle for reliable cutting performance Maximise productivity with a high-performance coating The combination of Tiger·tec Gold and the WPP10G grade delivers a balance of wear resistance and toughness that supports sustained machining performance when cutting steel. The coating reduces flank wear and thermal softening, which translates into longer effective tool life and fewer indexings. For production environments where cycle time and tool-change intervals matter, this coated carbide grade offers measurable gains in uptime and process stability without sacrificing edge strength. Predictable chip control for safer, cleaner cuts Thanks to the FP4 chipbreaker geometry, the insert promotes short, manageable chips in typical steel applications, reducing the risk of entanglement and improving surface finish consistency. Controlled chip formation also lowers the likelihood of tool damage under varying feed rates, enabling more reliable unattended runs and simpler chip evacuation. The optimised groove design supports steady cutting forces, which benefits both productivity and machine wear. Geometry tuned for accuracy and edge security The rhombic 80° shape combined with a 0.4 mm corner radius and an 11° relief angle provides a robust cutting edge that resists chipping while maintaining dimensional accuracy. The geometry suits a range of turning and boring motions, offering good access in shoulder and finish passes while preserving strength for interrupted cuts. The insert thickness (T3) ensures sufficient core support for higher cutting loads, contributing to repeatable results across batches. Application scope and handling advice for efficient use Intended primarily for ISO group P materials, this insert is well suited to unalloyed and alloyed steel grades. When integrating the insert into a process, select cutting parameters that exploit the coating’s thermal stability—moderate speeds with steady feeds usually yield the best compromise between life and surface quality. The grade remains a versatile option for shops seeking a reliable general-purpose solution that simplifies grade selection and reduces inventory complexity. Discuss application requirements with Metav Werkzeuge to match the CPMT09T304-FP4 WPP10G insert to specific steel grades and machining strategies — Metav Werkzeuge provides technical advice and supply support for smooth process implementation. Technical data Article number: CPMT09T304-FP4-WPP10G-WALTER Designation: CPMT09T304-FP4 WPP10G Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Gold Data Relief angle: 11° Corner radius: 0.4 mm Plate size: 09 Plate thickness: T3 Plate form: Rhombus 80° Tolerance class: M Special features Grade: WPP10G (coated carbide) Chipbreaker: FP4 optimised for steel Material application: Steel (ISO group P) Execution: T FAQ What materials is this insert suitable for? The CPMT09T304-FP4 WPP10G is designed primarily for steel (ISO group P) and performs best with unalloyed and alloyed steels. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker promotes controlled, short chips when machining steel, improving surface finish and reducing chip-related interruptions during runs. Can the insert withstand interrupted cuts and heavier feeds? Yes; the rhombic 80° geometry, 0.4 mm corner radius and T3 thickness provide a robust cutting edge suitable for occasional interrupted cuts and moderate increases in feed. What advantages does the Tiger·tec Gold series deliver? The Tiger·tec Gold coating enhances wear resistance and thermal stability, yielding longer tool life and more consistent performance across batch production. Is this insert compatible with standard CPMT toolholders? The CPMT designation indicates compatibility with holders that accept CPMT-format indexable inserts; ensure the holder matches the insert form and clamping method. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com