CPMT09T304-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of the WSM20S grade and the Tiger·tec Silver series for secure chip formation and extended edge life in turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for process-adapted recommendations. CPMT09T304-MM4 WSM20S indexable turning insert by Walter Tools — Tiger·tec Silver, for rostfreier Stahl and superalloys CPMT09T304-MM4 WSM20S is an indexable turning insert designed for demanding turning tasks on rostfreier Stahl and heat-resistant alloys, featuring a robust chipbreaker and a geometry optimised for stable cutting performance. Tiger·tec Silver for improved edge life WSM20S grade for rostfreier Stahl and superalloys MM4 chipbreaker for consistent chip control 11° relief angle and 0.4 mm corner radius Reliable cutting in difficult-to-machine materials The Tiger·tec Silver coating combined with the WSM20S grade provides a balance of thermal resistance and edge stability that reduces the risk of built-up edge when machining rostfreier Stahl and nickel-based alloys. The insert’s coated carbide substrate supports continuous cutting at elevated temperatures, which translates into fewer tool changes and more predictable production cycles. By stabilising chip formation with the MM4 chipbreaker, the insert lowers the likelihood of irregular chips that can damage workpiece surfaces or disrupt automated processes. This technical setup addresses throughput and process reliability — key criteria for efficient turning operations in series production. Geometry that supports surface quality and tool life The rhombic 80° form and the 0.4 mm corner radius are chosen to combine edge strength with acceptable surface finish, while the 11° relief angle reduces rubbing at the flank face. These geometric parameters help distribute cutting forces and lower thermal loads on the cutting edge, leading to extended service intervals. For users requiring consistent part quality, the combination of form, clearance and corner rounding provides a tangible reduction in rework and inspection effort. The insert’s tolerance class M further supports reproducible clamping and indexation in suitable toolholders, aiding repeatability across batches. Practical integration and application guidance Designed for standard indexable turning workflows, the plate size designation CPMT09 indicates suitability for toolholders accepting 09-format inserts; the designation also implies the plate thickness T3 and the MM4 chip control. The WSM20S sort is particularly suited where machining includes both rostfreier Stahl (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), offering a pragmatic choice for mixed production shops. Operators benefit from a reduced number of grade swaps and simplified inventory: one coated grade covers a broad range of demanding materials while delivering stable machining and repeatable results. Contact Metav Werkzeuge for tailored feed and speed recommendations and to secure consistent supply of Walter Tools Tiger·tec Silver inserts Technical Data SKU: CPMT09T304-MM4-WSM20S-WALTER Article designation: CPMT09T304-MM4 WSM20S Manufacturer: Walter Tools Product type: Indexable turning insert Key Measurements Corner radius: 0.4 mm Relief angle: 11° Plate size: 09 Plate thickness: T3 Shape: Rhombus 80° Tolerance class: M Materials & Features Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: MM4 Applicable material groups: S / M Primary applications: rostfreier Stahl, heat‑resistant superalloys and titanium Execution: T (single-sided thickness specification) FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The WSM20S grade in the CPMT09T304-MM4 insert is formulated for machining rostfreier Stahl (ISO group M) and provides stable chip formation and improved edge life in such applications. What does the MM4 chipbreaker do? The MM4 chipbreaker on the CPMT09T304-MM4 WSM20S insert controls chip shape and evacuation, helping to maintain consistent cutting conditions and protecting the workpiece surface during turning. Which workpiece materials are covered by the WSM20S grade? WSM20S is intended for rostfreier Stahl and heat‑resistant superalloys, with the coating and carbide combination optimised for thermal resistance and cutting edge stability in these materials. How do the 0.4 mm corner radius and 11° relief angle affect machining? The 0.4 mm corner radius increases edge strength for interrupted cuts and roughing, while the 11° relief angle reduces flank contact to improve surface finish and reduce heat buildup. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; info@walter-tools.com Protected trademarks and product names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from Walter Tools.
CPMT09T304-MP4 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of proven wear resistance, consistent chip control and precise geometry to keep turning operations productive and predictable; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. CPMT09T304-MP4 WPP20G turning insert — Tiger‑tec Gold, MP4 chipbreaker (Walter Tools) The CPMT09T304-MP4 WPP20G is a rhombic 80° turning insert optimised for steel machining, offering a Tiger‑tec Gold coated grade for reliable, high‑volume production. *Tiger‑tec Gold coated for long tool life *WPP20G grade for steel machining *MP4 chipbreaker for stable chip control *Rhombic 80° form with 0.4 mm radius Steady productivity through wear‑resistant coating The combination of the Tiger‑tec Gold coating and the WPP20G carbide grade delivers a dependable balance between wear resistance and toughness for steel applications. Designed for the thermal and mechanical demands of machining steel, the insert maintains edge integrity over extended cycles, reducing tool changes and maintaining production throughput. The coated substrate gives consistent performance across mixed production runs where thermal fluctuation and variable cutting forces occur. Geometry that improves process reliability The rhombic 80° insert form and an 11° free angle provide stable engagement and predictable turning behaviour on shoulder and profiling operations. The modest 0.4 mm corner radius supports medium‑finish passes while lowering the risk of edge chipping under interrupted cuts. Combined with the MP4 chipbreaker, these geometric choices ensure controlled chip formation and smooth evacuation, which enhances cycle time stability and lowers the likelihood of workpiece damage. Grade and chipbreaker explained for planners The WPP20G grade is a coated carbide solution optimised for steel (ISO group P), offering a universal balance that favours wear resistance without sacrificing toughness. The MP4 chipbreaker is tuned to produce short, clearable chips in typical steel turning operations; this reduces the requirement for additional chip‑control devices and simplifies fixture planning. For production engineers, this means fewer unplanned stops and more reliable batch completion rates. Practical handling and integration in workshops With a standard ISO form and the designation aligned to the CPMT family, the insert fits common turning toolholders that accept CPMT‑series parts, easing inventory management. The T3 plate thickness and the specified size help maintain rigidity in the cutting edge when mounted in suitable clamping systems. For workshops seeking a practical, economically efficient solution for steel turning, the insert offers straightforward adoption and repeatable results that support lean manufacturing goals. Contact Metav Werkzeuge for tailored recommendations on the CPMT09T304-MP4 WPP20G insert and to discuss suitable toolholder pairings or application parameters at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: CPMT09T304-MP4-WPP20G-WALTER Designation: CPMT09T304-MP4 WPP20G Brand: Walter Tools Series: Tiger-tec Gold Facts Free angle: 11° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 09 Thickness: T3 Tolerance class: M Special features Chipbreaker: MP4 Grade/coating: WPP20G, Tiger‑tec Gold coated carbide Material group: P (suitable for steel) Application focus: turning / general steel machining FAQ Which materials is this insert designed to machine? The CPMT09T304-MP4 WPP20G insert is specified for ISO group P materials and is optimised for machining steel. What chip control can be expected from the MP4 breaker? The MP4 chipbreaker on this Walter Tools insert produces short, controlled chips in typical steel turning applications, aiding safe evacuation and reducing interruption risk. What are the key geometric values of the insert? The insert features a rhombic 80° form, an 11° free angle and a 0.4 mm corner radius, which together provide stable engagement and reliable edge strength. Is the WPP20G grade suitable for high‑volume production? Yes, WPP20G in the Tiger‑tec Gold family is designed for a balance of wear resistance and toughness, supporting productive runs in steel machining. Does this insert conform to common ISO turning insert forms? The CPMT designation indicates standard form compatibility with toolholders designed for CPMT inserts, simplifying integration into existing setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods of the manufacturer. The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group.
CPMT09T308-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the FM4 chipbreaker and a 0.8 mm corner radius to achieve repeatable, secure machining of stainless steels; order the insert directly via Metav Werkzeuge or consult the specialists for application guidance. CPMT09T308-FM4 WMP20G – Walter Tools indexable insert, Tiger·tec Gold grade A CPMT09T308-FM4 WMP20G indexable insert designed for reliable machining of stainless steels in medium to robust cutting conditions. Tiger·tec Gold coating for extended tool life Optimised FM4 chipbreaker for stable chip control Rhombic 80° form with 0.8 mm corner radius 11° relief angle, T3 thickness for secure seating Greater process stability on stainless steels The combination of Tiger·tec Gold technology and the WMP20G grade provides a coated carbide substrate engineered for the specific demands of stainless steels. These materials tend to be tough and produce heat; the coating and grade together improve wear resistance and support stable edge retention. For production environments this translates into fewer tool changes and more consistent cycle times, supporting reliable output even when conditions become demanding. Controlled chips and improved surface finish The dedicated FM4 chipbreaker and rhombic 80° geometry focus on predictable chip formation and evacuation. A 0.8 mm corner radius helps maintain a robust cutting edge while reducing the risk of built-up edge, and the 11° relief angle optimises cutting engagement for common toolholders. These features simplify process setup: machinists obtain improved surface integrity and reduced rework due to better chip control and steady cutting forces. Secure clamping and repeatable tool life Manufactured with a T3 thickness and precise tolerances, this indexable insert offers secure seating in standard pockets and consistent performance across insert changes. The construction supports repeatable tool life and steady machining results, which is particularly beneficial for series production and contract work where reproducibility matters. When replacing inserts, the defined geometry and chipbreaker preserve cutting behaviour so set-up adjustments remain minimal. For tailored recommendations on integrating Walter Tools Tiger·tec Gold WMP20G inserts into existing processes, contact Metav Werkzeuge for machining consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: CPMT09T308-FM4-WMP20G-WALTER Designation: CPMT09T308-FM4 WMP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Core data Corner radius: 0.8 mm Relief angle: 11° Plate form: Rhombic 80° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Grade/coating: WMP20G (Tiger·tec Gold) Chipbreaker: FM4 Material type: Coated carbide Suitable for: Stainless steels (ISO group M) Execution: T FAQ What materials is this insert suitable for? The CPMT09T308-FM4 WMP20G is specifically intended for stainless steels (ISO group M) and performs well under medium to robust cutting conditions. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on the CPMT09T308-FM4 WMP20G controls chip form and evacuation to reduce interruptions and support a more stable cutting process. What does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on this Walter Tools insert enhances wear resistance and contributes to more consistent tool life when machining stainless steels. Is the 0.8 mm corner radius suitable for finishing operations? A 0.8 mm corner radius balances edge strength and surface quality; the CPMT09T308-FM4 WMP20G is appropriate for operations requiring robust edges with good surface integrity. Can the insert be used in standard toolholders? Yes, the T3 thickness and the rhombic 80° form of the CPMT09T308-FM4 WMP20G are compatible with common indexable insert pockets designed for this geometry. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original factory-new product from Walter Tools.
CPMT09T308-FM4 WMP20S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating, the WMP20S grade and a 0.8 mm corner radius for secure chip formation and extended edge life when machining stainless steels; order the CPMT09T308‑FM4‑WMP20S directly via Metav Werkzeuge or request application advice from the consultants. CPMT09T308-FM4 WMP20S – Rhombic 80° indexable insert, Tiger‑tec Silver (Walter Tools) The CPMT09T308-FM4 WMP20S is an indexable insert designed for drilling, boring and turning operations, optimised for reliable performance in stainless steel machining. *Tiger‑tec Silver coating for stable cutting edges *WMP20S grade optimised for stainless steels *Rhombic 80° form with 0.8 mm corner radius *FM4 chipbreaker for reliable chip control *11° clearance angle for secure cutting performance Stable cutting behaviour and improved edge life for stainless steels The Tiger‑tec Silver coating combined with the WMP20S carbide grade provides a balanced surface hardness and adhesion-resistant layer that reduces built‑up edge and thermal degradation during interrupted or continuous cuts. This combination supports a stable cutting edge when processing stainless steels, which are prone to work‑hardening and poor chip breakage. As a result, the insert sustains more consistent tool life and reduces the frequency of tool changes, supporting uninterrupted production and fewer quality variations. Geometry engineered for secure engagement and chip control A rhombic 80° insert form and 0.8 mm corner radius deliver a controlled entry angle and a favourable distribution of cutting forces, which helps to avoid edge chipping on demanding materials. The integrated FM4 chipbreaker is tuned to generate short, manageable chips when machining ductile, high‑temperature alloys, improving evacuation and reducing the risk of re‑cutting. The 11° clearance angle ensures positive rake engagement and reliable tool contact, contributing to consistent surface finishes and predictable machining behaviour. Versatile use across drilling, boring and turning processes Designed as a multi‑purpose insert for combined operations, this indexable plate suits both rotary cutting and axial reaming tasks with the same geometry, reducing tooling complexity at the machine. The insert’s configuration simplifies tool inventory and enables quick indexing for renewed cutting edges, which enhances shopfloor uptime. The balanced design supports customers seeking both efficiency and process reliability in mixed‑batch production where stainless steels are a frequent workload. Practical benefits for production and process security By combining a modern coating technology with a grade optimised for tough materials, the insert helps to lower the total cost of machining through longer tool life and fewer unscheduled tool changes. Process stability is improved by the controlled chip formation and edge strength, which reduces scrap rates and rework. In short runs or longer production sequences, the geometry and material pairing aim to deliver reproducible results and predictable maintenance intervals, aiding planning and throughput. Contact Metav Werkzeuge for tailored cutting data and ordering of Walter Tools Tiger‑tec Silver inserts to secure the CPMT09T308‑FM4‑WMP20S for stainless steel machining Technical Data Article number: CPMT09T308-FM4-WMP20S-WALTER Designation: CPMT09T308-FM4 WMP20S Type: Drill/boring and turning indexable insert Manufacturer: Walter Tools Grade: WMP20S Series: Tiger‑tec Silver Tolerance class: M Facts Clearance angle: 11° Corner radius: 0.8 mm Insert form: Rhombus 80° Insert size: 09 Plate thickness: T3 Special features Chipbreaker: FM4 Coating technology: Tiger‑tec Silver Material suitability: stainless steels Application: drilling, boring, turning Indexable insert designation without grade: CPMT09T308-FM4 FAQ Is this insert suitable for stainless steels? The CPMT09T308‑FM4 WMP20S grade is explicitly optimised for machining stainless steels, offering secure chip formation and resistance to built‑up edge under medium to robust cutting conditions. What does the FM4 chipbreaker achieve? The FM4 chipbreaker on this indexable plate promotes reliable chip control and short chip formation when machining ductile or heat‑generating alloys, improving evacuation and reducing re‑cutting. Can the insert be used for both drilling and turning operations? Yes, the insert is designed for combined drilling/boring and turning tasks, enabling flexible use across operations with comparable geometry and secure cutting behaviour. Why is the 0.8 mm corner radius important? A 0.8 mm corner radius balances edge strength and surface finish, reducing the risk of chipping while maintaining good load distribution during interrupted cuts or varying engagement depths. Which production benefits can be expected from the Tiger‑tec Silver coating? The Tiger‑tec Silver coating on the WMP20S grade enhances thermal resistance and reduces adhesion, extending edge life and contributing to consistent process reliability in stainless steel machining. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
CPMT09T308-FM4 WSM20S FM4 Wendeplatten - Walter Tools
Take advantage of the proven combination of heat-resistant Tiger·tec Silver coating, precise FM4 chip control and a robust Rhombic 80° geometry to maintain process reliability in demanding turning and drilling operations; order directly via Metav Werkzeuge or consult our advisors for application-specific selection. CPMT09T308-FM4 WSM20S — Drilling / Turning Indexable Insert, Tiger·tec Silver, FM4 The CPMT09T308-FM4 WSM20S is a rhombic 80° indexable insert designed for heavy-duty machining of rostfreier Stahl and heat‑resistant alloys in demanding production environments Tiger·tec Silver coating for heat resistance FM4 chipbreaker for stable chip control Rhombic 80° shape with 0.8 mm corner radius Optimised for rostfreier Stahl and superalloys Reliable performance on heat‑loaded materials The WSM20S grade combines a Tiger·tec Silver coating with a coated carbide substrate to increase heat resistance and support stable cutting edges under thermal load. Designed for machining materials classified as M and S according to ISO 513, this insert supports the removal of tough, gummy materials such as rostfreier Stahl and high‑temperature superalloys. The metallurgical design of the grade promotes predictable wear behaviour and consistent tool life, helping to reduce unplanned tool changes and to sustain cycle times in series production. Geometry and chip control that improve surface quality The rhombic 80° geometry, paired with the FM4 chipbreaker and a 0.8 mm corner radius, provides controlled chip formation and a balanced cutting edge for mixed turning and boring operations. The modest 11° relief angle and T3 plate thickness contribute to a stable edge chunking resistance, while the chipbreaker design reduces the risk of long, stringy chips that jeopardise process security. Explained simply: the chipbreaker shapes chips into predictable segments, which improves chip control and supports more consistent surface finishes with lower secondary operations. Process reliability, application scope and practical benefits This insert is tailored for productive machining where material toughness and heat generation challenge tool life. As a coated carbide insert in the Tiger·tec Silver family, the component offers a reliable combination of wear resistance and edge stability that can translate into fewer indexings and steadier dimensional results. The design supports both drilling/reboring and turning tool systems that accept CPMT‑style inserts, making it a versatile choice for shops machining rostfreier Stahl and heat‑resistant alloys. Technical or application enquiries can be addressed through Metav Werkzeuge to ensure correct integration with holders and machining parameters. For targeted tool selection and support with Walter Tools’ Tiger·tec Silver inserts, contact Metav Werkzeuge for tailored advice and quick delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: CPMT09T308-FM4-WSM20S-WALTER Designation: CPMT09T308-FM4 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Relief angle: 11° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Shape: Rhombic 80° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: FM4 Material suitability: rostfreier Stahl; heat‑resistant superalloys and titanium Application: drilling, reboring and turning operations where stable chip formation is required FAQ Is this insert suitable for rostfreier Stahl? The CPMT09T308-FM4 WSM20S is optimised for rostfreier Stahl (ISO group M) and provides enhanced heat resistance and edge stability for machining stainless alloys. What advantage does the FM4 chipbreaker offer? The FM4 chipbreaker on this Walter Tools insert shapes and segments chips to improve chip control and reduce entanglement, supporting safer, more consistent machining and better surface quality. Which toolholders accept this insert? The designation CPMT09 indicates a standard CPMT‑style rhombic 80° insert; compatible toolholders are those designed for CPMT09 inserts with T3 thickness and the corresponding clamping system. How does the Tiger·tec Silver coating affect performance? Tiger·tec Silver on the WSM20S grade increases thermal resistance and helps maintain a stable cutting edge under elevated temperatures, extending usable life and supporting repeatable performance. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes and do not indicate any affiliation with Metav Werkzeuge. The offered article is original and factory‑new from the manufacturer.
CPMT09T308-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the FP4 chipbreaker to achieve stable chip control and extended tool life when machining steel; order directly via Metav Werkzeuge or consult the Metav team for application-specific recommendations. CPMT09T308-FP4 WPP10G indexable insert for steel machining — Walter Tools CPMT09T308-FP4 WPP10G is a coated carbide turning and boring insert designed for productive machining of steel components under ISO P conditions Tiger·tec Gold coating for wear resistance FP4 chipbreaker for stable chip control Designed for ISO P — steel machining Rhombus 80° shape with 11° relief Consistent performance on steel parts owing to Tiger·tec Gold The Tiger·tec Gold coating on this coated carbide grade delivers improved wear resistance and process stability during continuous turning and boring operations on steel (ISO P). The combination of a robust coating and the underlying carbide substrate reduces flank wear and helps maintain dimensional accuracy over longer tool life, which supports predictable production runs and fewer unscheduled tool changes. This makes the insert especially suitable for repetitive, high-volume tasks where uptime and consistent quality are crucial. Precise chipforming and cutting geometry for reliable productivity The FP4 chipbreaker is engineered for controlled chip splitting and evacuation when cutting steel, reducing risk of surface defects and facilitating safer machining. The rhombus 80° form provides a versatile cutting edge for both straight cuts and shallow profiling, while the 11° relief and corner radius 0.8 mm support a balance between edge strength and surface finish. The insert’s designation CPMT09T308-FP4 WPP10G corresponds to a compact plate size (09) and a plate thickness of T3, offering a stable edge for medium to heavy cutting conditions. Integration into production tooling for reduced cycle times The insert’s standard ISO designation and stable geometry allow straightforward replacement within holders compatible with the CPMT09 series; this shortens setup time and simplifies inventory management. Thanks to the material focus on steel, process parameters can be optimised to benefit from the grade’s wear characteristics and the chipbreaker’s performance, often resulting in improved material removal rates and lower overall tooling costs per component. For workshops aiming to increase throughput without sacrificing surface quality, this insert is a cost-effective option from Walter Tools. For tailored advice on implementing the CPMT09T308-FP4 WPP10G insert in specific turning or boring setups, or to secure current stock through Metav Werkzeuge, please contact Metav Werkzeuge for personal consultation and fast delivery. Technical data SKU: CPMT09T308-FP4-WPP10G-WALTER ISO designation: CPMT09T308-FP4 WPP10G Short designation: CPMT09T308-FP4 Core data Relief angle: 11° Corner radius: 0.8 mm Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Coating/series: Tiger·tec Gold Grade/sort: WPP10G (coated carbide) Chipbreaker: FP4 Shape: Rhombus 80° Execution: T Material application: Steel (ISO P) FAQ Which materials is this insert suited for? The CPMT09T308-FP4 WPP10G insert is specifically designed for steel (ISO P) applications; the WPP10G grade and Tiger·tec Gold coating optimise performance for unalloyed and alloyed steels. What does the FP4 chipbreaker deliver in practice? The FP4 chipbreaker on the CPMT09T308-FP4 WPP10G promotes consistent chip formation and evacuation when machining steel, improving surface finish and reducing the likelihood of chip-related interruptions. How does the rhombus 80° shape affect cutting tasks? The rhombus 80° geometry gives the insert versatility for straight turning and light profiling; the acute approach enables access to tighter features while maintaining edge strength for general turning duties. Is this insert intended for heavy roughing or finishing? With a corner radius of 0.8 mm and robust coating, the CPMT09T308-FP4 WPP10G is well suited to general and semi-finishing operations on steel, balancing edge life and surface quality. Can this insert be used with standard CPMT09 holders? Yes, the ISO designation CPMT09 indicates compatibility with holders designed for that insert family, facilitating direct replacement in existing tool systems. Manufacturer: Walter Tools; The Walter AG (brand Walter Tools) with headquarters in Tübingen, Germany; part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. The offered article is original, brand-new stock supplied by the manufacturer.
CPMT09T308-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver wear resistance and the WKK20S grade tailored for cast iron delivers reliable tool life and consistent chip control; the rhombic 80° geometry with an 11° free angle and 0.8 mm corner radius ensures robust edges and good surface finish — order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CPMT09T308-MK4 WKK20S indexable turning insert for cast iron, Walter Tools The CPMT09T308-MK4 WKK20S is a rhombic, coated carbide insert designed for productive turning of cast iron components, integrating Tiger·tec Silver technology and an MK4 chipbreaker. Tiger·tec Silver coating for improved wear resistance WKK20S grade optimised for cast iron applications Rhombic 80° geometry for versatile turning and facing MK4 chipbreaker for controlled, short chips Maximise productivity on cast iron with a wear-resistant grade This insert pairs the WKK20S coated-carbide grade with Tiger·tec Silver technology to address the abrasive nature of cast iron (ISO group K). The grade is formulated for reliable performance under the frequent, short-breaking chip conditions typical of grey and nodular cast iron. As a result, machinists benefit from extended tool life and predictable wear patterns, which in turn support stable process windows and reduced downtime. The insert’s construction focuses on efficiency and repeatability in series production. Geometry and chip control that improve surface quality and process stability The rhombic 80° profile offers flexibility for both longitudinal turning and light facing operations, while the 11° free angle reduces flank rubbing and heat generation. A 0.8 mm corner radius balances edge strength with achievable finish, making the insert suitable for semi-finish to finishing passes where a controlled edge is required. The MK4 chipbreaker is tuned for short, manageable chips on cast iron, improving evacuation and helping to prevent workpiece marking — an important consideration when consistent surface quality is required. Robust design for consistent results and simplified tooling decisions Available in size 09 with thickness T3, this insert integrates smoothly into common toolholder systems for inserts of its designation. The coated substrate and chipbreaker combination contributes to steady performance even under variable cutting conditions. Choosing a Tiger·tec Silver insert with the WKK20S grade supports cost-efficiency through longer intervals between index changes and fewer unexpected tool failures. The proven Walter Tools platform offers the process security sought in industrial turning operations. Contact Metav Werkzeuge for tailored recommendations on insert selection and availability of Walter Tools parts; technical queries and rapid supply options can be discussed at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: CPMT09T308-MK4-WKK20S-WALTER Designation: CPMT09T308-MK4 WKK20S Product type: indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Facts Geometry: Rhombic 80° Free angle: 11° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Tolerance class: M Special features Coating/series: Tiger·tec Silver Grade: WKK20S (coated carbide) Chipbreaker: MK4 Material application: cast iron (ISO group K) Execution: T Sort description: suitable for abrasive wear and short, breaking chips FAQ Which materials is this insert intended for? The CPMT09T308-MK4 WKK20S is specified for cast iron (ISO group K); the WKK20S grade and Tiger·tec Silver coating are tuned to resist abrasive wear and to handle short, breaking chips typical of cast materials. What advantages does the MK4 chipbreaker provide? The MK4 chipbreaker on this Walter Tools insert promotes controlled, short chips when turning cast iron, improving chip evacuation and reducing the risk of surface damage during continuous production. How does the rhombic 80° geometry affect application range? The rhombic 80° shape gives flexibility for both longitudinal turning and light facing operations; combined with the 11° free angle, it supports stable cutting and reduced flank contact for improved surface finish. Is the insert suitable for finishing passes? Yes; with a 0.8 mm corner radius and the coated grade, the insert can be used for semi-finish to finish turning where a balance of edge strength and surface quality is required. What series and coating technology does this insert use? This product belongs to the Tiger·tec Silver series and uses a coated carbide grade WKK20S, offering enhanced wear resistance for demanding cast-iron machining. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Walter Tools (Walter AG) is a global manufacturer of precision cutting tools and is part of the Sandvik group. Protected trademarks and product names remain the property of their respective owners. The mentioned brand is cited for explanation; there is no affiliation between our company and the brands named. The offered article is original, factory-new merchandise of the manufacturer.
CPMT09T308-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Benefit from consistent performance in stainless steels and heat-resistant superalloys thanks to the Tiger·tec Silver WSM20S grade and the MM4 chipbreaker; combine long tool life with reliable chip control and order the CPMT09T308-MM4 via Metav Werkzeuge or consult the specialists for application-specific advice. CPMT09T308-MM4 WSM20S turning indexable insert — Tiger·tec Silver grade, MM4 chipbreaker (Walter Tools) A CPMT09T308-MM4 WSM20S indexable insert engineered for secure machining of stainless steels and heat-resistant superalloys in demanding turning operations. Tiger·tec Silver coating, WSM20S grade Optimised chip control with MM4 breaker Rhombic 80° form with 0.8 mm corner radius Suited for stainless steels and superalloys Reliable material compatibility and grade advantages The coated carbide WSM20S in the Tiger·tec Silver series is formulated for high demands when machining stainless steels and superalloys. This cutting grade emphasises thermal stability and edge integrity, which reduces the risk of built-up edge and unexpected tool failure. As a consequence, process stability is improved and machining cycles can be scheduled with greater confidence. The material behaviour of the workpiece is considered explicitly: these alloys tend to retain heat and strain the cutting edge, so the grade is optimised to maintain a sharp, stable edge under elevated temperatures. Controlled chip formation and surface quality The MM4 chipbreaker combined with the rhombic 80° geometry provides consistent chip control and predictable breakage, supporting uninterrupted turning cycles. A 0.8 mm corner radius and 11° relief angle balance robustness and finish capability: the radius supports higher metal removal rates while still enabling fine surface quality when required. The insert’s dimensional stability is supported by tolerance class M, which ensures repeatable seating and concentricity in the holder; this is particularly important when a reproducible surface finish and dimensional accuracy are needed across production batches. Practical application benefits and economical handling With a plate size of 09 and T3 thickness, the insert is compatible with standard CPMT tool systems and is straightforward to index and replace, reducing machine downtime. The coated carbide construction from the Tiger·tec Silver family delivers a combination of wear resistance and shock tolerance, making the insert suitable for interrupted cuts and mixed-cycle production. Maintenance is simplified because inserts can be rotated or exchanged quickly; overall tool costs are lowered by extending edge life and reducing scrap through stable cutting performance. For newcomers: an indexable insert fixes into a corresponding toolholder and is secured by clamp or screw — this enables fast replacement without regrinding. Discuss tool selection and application parameters with Metav Werkzeuge to ensure optimal performance for stainless steel or superalloy turning; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and availability Technical Data Article number: CPMT09T308-MM4-WSM20S-WALTER Manufacturer: Walter Tools Numbers / Core technical data Plate size: 09 Corner radius: 0.8 mm Relief angle: 11° Thickness: T3 Tolerance class: M Special features / Versions Series: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: MM4 Plate form: Rhombic 80° (CPMT geometry) Suitable for: stainless steels (ISO M), heat‑resistant superalloys (ISO S) FAQ What materials is this insert intended for? The CPMT09T308-MM4 WSM20S insert is designed for stainless steels (ISO group M) and heat‑resistant superalloys (ISO group S), offering thermal stability and edge strength for these demanding materials. What does WSM20S and Tiger·tec Silver signify? WSM20S is the Walter Tools grade within the Tiger·tec Silver coating technology; it denotes a coated carbide engineered for improved wear resistance and cutting‑edge stability under elevated temperatures. How does the MM4 chipbreaker affect machining? The MM4 breaker ensures predictable chip formation and efficient evacuation, which helps to avoid entangling chips and contributes to consistent surface finish and extended tool life during turning. Which operations are best suited to the CPMT09T308-MM4? Its 0.8 mm corner radius and rhombic 80° geometry make the insert versatile for mixed operations: it supports robust roughing and can deliver fine finishes with appropriate cutting parameters and stable machine setup. How does tolerance class M influence performance? Tolerance class M provides reproducible seating accuracy in toolholders, which is important for maintaining concentricity and predictable cutting forces across serial production. Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
CPMT09T308-MP4 WPP20G MP4 Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the MP4 chipbreaker for longer tool life and reliable chip control; the combination of rhombic geometry and a modest 0.8 mm corner radius ensures stable cutting in steel and predictable surface quality. Order directly via Metav Werkzeuge or request expert advice from our consultants. CPMT09T308-MP4 WPP20G indexable turning insert – Walter Tools, 11° relief, rhombic 80° The CPMT09T308-MP4 WPP20G is an indexable turning insert designed for robust steel machining under ISO P conditions, combining a Tiger‑tec Gold coating with an MP4 chipbreaker for consistent performance. Tiger‑tec Gold coating for long tool life Designed for steel machining (ISO P) Rhombic 80° form with 11° relief MP4 chipbreaker for reliable chip control Higher productivity through durable coating and grade The Tiger‑tec Gold-coated grade WPP20G offers a balanced hardness and toughness profile that improves lifetime under typical steel cutting temperatures. As an indexable insert it delivers repeatable results for batch or single-component production, reducing costly tool changes. The coated hardmetal substrate helps to maintain a stable cutting edge and minimise flank wear over extended cycles, which in turn lowers per-part machining cost while maintaining consistent dimensional accuracy. Reliable chip formation and surface integrity The integrated MP4 chipbreaker is tuned to the rhombic 80° geometry and the 11° relief to produce controllable chip segments when turning steels. This results in reduced risk of built-up edge and improved workpiece surface quality. The modest 0.8 mm corner radius offers a compromise between strength and fine finish, suitable for general finishing and semi-finishing passes where a balance of edge life and surface appearance is required. Clear specifications that support process planning The insert is supplied in the CPMT09T308-MP4 format and is available in the T3 thickness variant; the designation indicates compatibility with standard indexable toolholders for rhombic inserts. The grade is explicitly targeted at ISO P materials (steel), making it suitable for unalloyed and alloyed steels with typical heat generation and chip behaviour. Engineers can therefore plan cutting data conservatively around a combination of coating benefits and chipbreaker geometry to extend productivity and process security. Practical procurement and application support For complex or high-volume applications the grade’s universality simplifies tool inventory: one coated grade covers a wide range of steel components, reducing the number of different inserts required. For specific cutting data, holder recommendations or to verify suitability for an application, Metav Werkzeuge provides technical consultation and samples on request; technical enquiries are handled by the sales team with industry experience and clear, application‑oriented advice. Contact Metav Werkzeuge for a tailored recommendation on the Walter Tools CPMT09T308-MP4 WPP20G or to request cutting data and availability at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data SKU: CPMT09T308-MP4-WPP20G-WALTER Label: Drehwendeschneidplatte CPMT09T308-MP4 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger‑tec Gold Facts Relief angle: 11° Corner radius: 0.8 mm Insert form: Rhombus 80° Insert size: 09 Thickness: T3 Chipbreaker: MP4 Tolerance class: M Special features Grade: WPP20G (coated cemented carbide) Coating technology: Tiger‑tec Gold Application group: ISO P (steel) Execution: T Suitable for steel machining FAQ Which materials is this insert suitable for? The CPMT09T308-MP4 WPP20G is specified for ISO P materials, i.e. for the machining of steel (unalloyed and alloyed steels). What coating and grade does the insert use? The insert uses the Tiger‑tec Gold coating and the WPP20G grade, a coated cemented carbide designed for a balance of wear resistance and toughness. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker promotes reliable chip control in steel turning operations and supports stable surface finish when combined with the rhombic 80° geometry. What edge preparation and geometry are specified? The insert features an 11° relief angle and a 0.8 mm corner radius on a rhombic 80° form, suitable for semi-finishing and finishing passes in steel. Is the CPMT09T308-MP4 available for standard toolholders? The CPMT09T308-MP4 designation corresponds to common indexable insert formats and fits holders designed for rhombic 80° inserts of size 09. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original factory‑new goods of the manufacturer.
CPMW050204-RK6 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, a dedicated RK6 chipbreaker and a rhombic 80° geometry for efficient machining of cast iron; order the CPMW050204-RK6 WKK20S inserts directly via Metav Werkzeuge or request application advice from our consultants. CPMW050204-RK6 WKK20S Walter Tools — Rhombic 80° indexable turning insert with Tiger‑tec Silver for cast iron The CPMW050204-RK6 WKK20S is a rhombic 80° turning insert with a Tiger‑tec Silver coated carbide grade, engineered for productive and wear-resistant machining of cast iron. Tiger·tec Silver coating for wear resistance Optimised for cast iron machining RK6 chipbreaker for reliable chip control Rhombic 80° form, 0.4 mm corner radius Consistent productivity for abrasive cast iron The coated carbide grade WKK20S from the Tiger‑tec Silver series is tuned for the abrasive nature of cast iron, delivering stable chip formation and extended tool life. The combination of a wear-resistant coating and a grade formulated for short, breaking chips reduces flank wear and maintains cutting-edge integrity over longer runs. This results in fewer index changes and a steadier production rhythm, which benefits batch processes and serial turning applications. Geometry that balances edge stability and versatility The rhombic 80° shape with an 11° clearance angle and a 0.4 mm corner radius provides a robust cutting edge while allowing flexible approach geometries. The RK6 chipbreaker promotes controlled chip segmentation during interrupted and continuous cuts, improving surface finish and lowering the risk of chip re-cutting. Such geometry is particularly beneficial where a balance between tool life and component quality is required. Coating and substrate engineered for longevity The Tiger‑tec Silver coating system combines a resistant surface layer with a tough carbide substrate, creating a microstructure that resists abrasive wear typical of grey and ductile cast irons. The result is improved edge retention and consistent dimensional accuracy in turning operations. For process planners, this means predictable performance across a range of cutting conditions and fewer unexpected tool interventions. Application-focused advantages and handling notes Designed for machining cast iron according to ISO material group K, the insert’s chipbreaker and substrate pairing are suited to typical casting irregularities and short-chip tendencies. The insert form and size code support common toolholder platforms for easy integration into existing setups. While the insert offers good wear resistance and chip control, matching cutting parameters and coolant strategy to the specific cast iron grade will ensure optimal balance between productivity and surface integrity. Contact Metav Werkzeuge for technical guidance and to source Walter Tools CPMW050204-RK6 WKK20S inserts with Tiger‑tec Silver coating Technical data *SKU: CPMW050204-RK6-WKK20S-WALTER Label: Drehwendeschneidplatte CPMW050204-RK6 WKK20S Walter Tools Brand: Walter Tools Product type: Turning indexable insert Series: Tiger‑tec Silver Numbers / Core technical data *Free angle: 11° Corner radius: 0.4 mm Insert size: 05 Thickness code: 02 Tolerance class: M Designs / Special features *Chipbreaker: RK6 Coating / grade: WKK20S (coated carbide) Plate form: Rhombus 80° Material application: Cast iron (ISO group K) Execution: W FAQ What materials is this insert designed for? The CPMW050204-RK6 WKK20S insert from Walter Tools is designed primarily for cast iron applications (ISO group K), where its grade and chipbreaker handle abrasive and short‑chip behaviour. How does the RK6 chipbreaker affect machining? The RK6 chipbreaker on the CPMW050204-RK6 WKK20S promotes consistent chip segmentation and evacuation, contributing to improved surface quality and reduced likelihood of chip entanglement during turning. What benefits does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on this Walter Tools grade enhances wear resistance and edge retention, extending tool life when machining abrasive cast iron components. Can this insert be used for finishing and roughing? With a 0.4 mm corner radius and robust grade, the insert is suitable for a mix of roughing and semi‑finishing cuts on cast iron; selection of cutting parameters will determine the final surface result. Is the rhombic 80° form compatible with standard holders? The rhombic 80° geometry of the CPMW050204-RK6 WKK20S fits common turning toolholders designed for 80° rhombic inserts, allowing straightforward integration into many tool systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new article of the manufacturer.
CPMW060204-RK6 WKK20S WKK20S Wendeplatten - Walter Tools
Benefit from productive machining and broad material compatibility thanks to the Tiger·tec Silver WKK20S grade and the RK6 chipbreaker, which together deliver consistent chip control and durable cutting edges for cast iron turning; order the CPMW060204-RK6 WKK20S insert directly via Metav Werkzeuge or consult our specialists for machining advice. CPMW060204-RK6 WKK20S indexable turning insert — Walter Tools, Tiger·tec Silver for cast iron The CPMW060204-RK6 WKK20S is an indexable turning insert engineered for reliable finishing and medium-duty turning in cast iron, combining a robust chipbreaker and Tiger·tec Silver coating for stable process performance. Tiger·tec Silver coated carbide grade WKK20S RK6 chipbreaker for stable chip control Rhombic 80° plate with 11° clearance angle 0.4 mm corner radius for consistent edge life High productivity through optimised chip control and grade selection The insert’s combination of WKK20S grade and RK6 chipbreaker is designed to tackle the abrasive nature of cast iron by encouraging predictable, short chips and reducing heat concentration at the cutting edge. This results in fewer interruptions for chip clearing and more consistent cycle times. The Tiger·tec Silver coating supports thermal stability and wear resistance, which together increase the usable life of the cutting edge and lower tool change frequency; the outcome is a measurable improvement in operational efficiency for workshops focused on continuous production. Geometry that supports accuracy and process security The rhombic 80° plate form and 11° clearance angle deliver a balance between cutting strength and access to narrow profiles, while the 0.4 mm corner radius provides a defined edge that enhances dimensional repeatability. These geometric attributes reduce the risk of vibration-induced surface defects and contribute to predictable tolerances in turned components. For toolroom planners and production engineers, the insert’s design translates directly into better surface quality and fewer scrap parts when machining grey and nodular cast irons. Coating and material match for longer tool life Tiger·tec Silver’s multilayer coating technology is specifically tuned to combat abrasive wear typical of cast iron machining. The coating reduces adhesion and improves heat dissipation, which helps maintain the integrity of the cutting edge under intermittent cutting conditions. Using a coated cemented carbide substrate enhances resistance to flank wear, so the insert sustains useful life across a wider range of feed rates and cutting speeds. The result is improved cost-per-part when compared with uncoated or less optimised grades. Practical advantages in workshop use and tool management With a standard plate size and a compact thickness, this insert fits common toolholders and is straightforward to index when a fresh edge is required. The toleranced design and consistent production quality simplify tool inventory management and rotation strategies. For production planners, the straightforward classification under the Tiger·tec Silver family enables easier grade selection for a variety of cast iron tasks, while preserving the ability to switch to other Walter Tools grades if process demands change. If additional machining data or application-specific recommendations are required, technical consultation is available. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver turning inserts and to confirm availability for the CPMW060204-RK6 WKK20S SKU Technical data SKU: CPMW060204-RK6-WKK20S-WALTER ISO designation: CPMW060204-RK6 WKK20S Series: Tiger-tec Silver Manufacturer: Walter Tools Core specifications Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Clearance angle: 11° Corner radius: 0.4 mm Chipbreaker: RK6 Tolerance class: M Execution: W Features and applications Coating: Tiger·tec Silver Grade: WKK20S (coated cemented carbide) Material group: K (cast iron) Cast iron application: Yes FAQ Is this insert suitable for grey and nodular cast irons? The CPMW060204-RK6 WKK20S insert from Walter Tools is formulated for cast iron (ISO group K) and performs well on both grey and nodular grades thanks to the WKK20S grade and RK6 chipbreaker. Which chip control behaviour can be expected with this insert? The RK6 chipbreaker promotes short, controllable chips during turning in cast iron, improving machining stability and reducing interruptions for chip evacuation. What makes the Tiger·tec Silver coating advantageous for cast iron machining? The Tiger·tec Silver coating on the WKK20S grade reduces abrasive wear and improves thermal stability, which helps maintain edge integrity and extends tool life under typical cast iron cutting conditions. Can the insert be used in standard toolholders for 80° rhombic plates? Yes, the rhombic 80° form and standard dimensions of this insert make it compatible with conventional holders designed for CPMW-style plates. How is the corner radius relevant to surface finish and tool life? The 0.4 mm corner radius offers a compromise between a defined cutting edge for accurate profiles and sufficient edge strength to resist chipping, aiding both surface quality and consistent tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools and related product names are protected trademarks of their respective owners. Brand names and trademarks are used solely for identification and explanation of the product and its compatibility. There is no affiliation between our company and the trademark owners. The offered item is an original, brand-new product from the manufacturer.
CPMW09T304-RK6 WKK20S RK6 Wendeplatten - Walter Tools
Take advantage of a coated carbide grade that is optimised for abrasive cast iron machining and a proven RK6 chipbreaker to keep production stable and predictable; order directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. CPMW09T304-RK6 WKK20S indexable turning insert — RK6 chipbreaker, Tiger·tec Silver (Walter Tools) The CPMW09T304-RK6 WKK20S is an indexable turning insert engineered for productive machining of cast iron components in industrial turning applications. Tiger·tec Silver coating for high wear resistance Optimised RK6 chipbreaker for broken chips Rhombic 80° shape for versatile turning 0.4 mm corner radius for consistent edge life Consistent productivity for abrasive cast iron work The coated carbide grade WKK20S in the Tiger·tec Silver family is tuned to handle the abrasive nature of cast iron (material group K), delivering stable chip formation and reliable tool life. Thanks to the combination of a hard, wear-resistant coating and a substrate optimised for brittle-chip materials, the insert reduces unexpected downtime and supports steady machining parameters. This results in improved throughput and fewer insert changes in repetitive turning operations. Precise chip control and edge stability The RK6 chipbreaker is designed to produce short, controllable chips when turning cast iron, lowering the risk of chip tangling and machine interruption. Paired with a 0.4 mm corner radius and a 11° relief angle, the geometry balances strength at the cutting edge with the ability to generate predictable cutting forces. The outcome is improved process reliability and a consistent surface finish, which simplifies downstream inspection and reduces rework. Versatile geometry that supports shop flexibility A rhombic 80° insert form offers broad application potential across facing and turning tasks, enabling fewer tool changes and simpler toolholders on the shop floor. The insert thickness (T3) and tolerance class M contribute to repeatable seating and positional accuracy in tool clamping systems, supporting quick index changes. For workshops seeking to streamline tooling inventories, this insert provides a practical compromise between rigidity and application range. Application guidance and quality considerations This insert is specified for cast iron machining according to ISO group K; it is a coated carbide grade intended for abrasive, short-chip conditions common in cast components. Selection of cutting parameters should reflect workpiece hardness and machine stiffness to leverage the Tiger·tec Silver coating’s wear resistance. Metav Werkzeuge can support process optimisation with cutting data recommendations and grade comparisons to match operational goals. Contact Metav Werkzeuge for tailored Walter Tools turning recommendations and rapid supply — info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CPMW09T304-RK6-WKK20S-WALTER Article: CPMW09T304-RK6 WKK20S Manufacturer: Walter Tools Product type: indexable turning insert Facts Insert size: 09 Thickness: T3 Relief angle: 11° Corner radius: 0.4 mm Shape: Rhombic 80° Tolerance class: M Special features Grade: WKK20S (coated carbide) Series: Tiger·tec Silver Chipbreaker: RK6 Application: Cast iron (ISO group K) Execution: W FAQ What materials is this insert suitable for? The insert is intended for machining cast iron; the WKK20S grade and Tiger·tec Silver coating are optimised for abrasive, short-chip cast materials. How does the RK6 chipbreaker affect production? The RK6 chipbreaker promotes short, controlled chips during cast iron turning, which reduces chip management issues and supports continuous, stable production. Can the insert be used for finishing operations? With a 0.4 mm corner radius and a coated grade focused on wear resistance, the insert can deliver consistent surface quality in many finishing passes on cast iron when appropriate feeds and speeds are selected. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPMW09T308-RK6 WKK20S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, the WKK20S grade and the RK6 chipbreaker for productive, wear‑resistant cast iron turning. Order the CPMW09T308-RK6 WKK20S directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. CPMW09T308-RK6 WKK20S indexable turning insert for cast iron, Tiger·tec Silver – Walter Tools A high-performance CPMW09T308-RK6 WKK20S indexable turning insert optimised for cast iron machining, offering abrasion resistance and reliable chip control in industrial turning operations Tiger·tec Silver coating for abrasion resistance WKK20S grade optimised for cast iron RK6 chipbreaker for consistent chip control Rhombic 80° shape with 0.8 mm corner radius Maximise productivity and reduce tool changes in cast iron turning The combination of the Tiger·tec Silver coating and the WKK20S grade is engineered to resist the abrasive wear typical of cast iron applications. The coated carbide substrate reduces flank wear and prolongs cutting edge life, which translates into fewer tool changes and higher machine uptime. For production environments where predictable tool life leads directly to lower running costs, this insert supports a stable process and consistent component quality. Predictable chips and process stability for safer machining Equipped with the RK6 chipbreaker, the insert produces short, controlled chips suited to cast iron materials, improving handling in automated and manual setups. The rhombic 80° geometry together with an 0.8 mm corner radius and 11° clearance angle offers a robust cutting edge that resists chipping while providing reliable access to varied turning profiles. Better chip control leads to reduced cycle interruptions and a cleaner machining area, supporting higher throughput and improved surface finish. Practical dimensions and integration into standard toolholders The insert size (09) and T3 thickness conform to common tooling systems, allowing straightforward integration into existing toolholders without complex adaptations. The cutting material is a coated carbide optimised for abrasive cast iron work, classified under a medium tolerance class for consistent interchangeability. With Walter Tools' manufacturing standards, the component supports repeatable mounting and predictable performance across batches, simplifying inventory and process planning. For productive cast iron machining with Walter Tools Tiger·tec Silver, contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CPMW09T308-RK6-WKK20S-WALTER SKU: CPMW09T308-RK6-WKK20S-WALTER Product type: indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK20S Facts Clearance angle: 11° Corner radius: 0.8 mm Insert shape: Rhombic 80° Insert size: 09 Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver Material class: coated carbide Chipbreaker: RK6 Application: cast iron (K) Suitability: abrasive wear resistance, short chip formation FAQ What materials is the CPMW09T308-RK6 WKK20S suitable for? The CPMW09T308-RK6 WKK20S insert from Walter Tools is designed specifically for machining cast iron, with the WKK20S grade tuned to handle abrasive wear and the short, breaking chips typical of these materials. How does the RK6 chipbreaker affect machining performance? The RK6 chipbreaker on this insert produces predictable, short chips that improve chip evacuation and process stability in cast iron turning, reducing interruptions and enhancing safety at the machine. Which geometry features help prevent edge chipping? The rhombic 80° shape combined with the 0.8 mm corner radius and 11° clearance delivers a robust cutting edge that resists sudden chipping and supports consistent surface quality during heavier cuts. Is the insert compatible with standard toolholders? Yes, the CPMW09T308-RK6 WKK20S uses common insert dimensions (size 09, T3 thickness) and tolerance class M, facilitating integration into standard turning toolholders for industrial applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original factory-new product of the respective manufacturer.
DCGT070201-FM2 WSM20S WSM20S Wendeplatten - Walter Tools
Taking advantage of the Tiger‑tec Silver coating together with the FM2 chipbreaker and a precise 0.1 mm corner radius delivers consistent edge stability and improved surface quality when machining rostfreier Stahl and high‑temperature alloys; order the DCGT070201‑FM2 WSM20S directly via Metav Werkzeuge or ask our consultants if needed DCGT070201-FM2 WSM20S — turning insert (Rhombus 55°), Tiger‑tec Silver, for rostfreier Stahl and superalloys — Walter Tools DCGT070201-FM2 WSM20S is a rhombic 55° turning insert from the Tiger‑tec Silver family designed for demanding turning of rostfreier Stahl and heat‑resistant superalloys and titanium components Tiger‑tec Silver coating for thermal stability FM2 chipbreaker for secure chip control 7° clearance angle for stable cutting 0.1 mm corner radius for fine surface finish Improved cutting performance for difficult materials The Tiger‑tec Silver technology on this indexable insert enhances heat resistance and wear behaviour when cutting materials that generate high temperatures and strain the cutting edge. Designed for the ISO groups M and S, the geometry and coating combination promote stable chip formation and reduce the risk of built‑up edge during sustained cuts in rostfreier Stahl and nickel‑based alloys. This results in fewer unplanned tool changes and more predictable tool life, supporting higher process reliability and lower unit costs in production runs. Geometry that supports repeatable surface quality A Rhombus 55° form combined with a 0.1 mm corner radius and a 7° clearance angle gives a balance between strength and finishing capability. The small corner radius helps achieve a controlled micro‑profile on the workpiece while the rhombic angle allows positive cutting into shoulders and profiles. The FM2 chipbreaker is tuned for secure chip control under variable cutting conditions, enabling consistent surface integrity and reduced secondary operations. Where fine finishes matter, this geometry helps maintain repeatable results across batches. Process security and productivity in turning applications As a member of the Tiger‑tec Silver series the insert supports stable cutting edges in challenging environments, which improves productivity and reduces machine downtime. The robust combination of coating, chipbreaker and geometry promotes a lower cost per component through extended life and consistent performance. The DCGT070201‑FM2 WSM20S insert is suitable for standard DCGT toolholders and is a pragmatic choice for shops seeking reliable, high‑temperature performance from a well‑engineered Walter Tools solution Contact Metav Werkzeuge for application advice and supply of Walter Tools Tiger‑tec Silver turning inserts; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: DCGT070201-FM2-WSM20S-WALTER Label: Drehwendeschneidplatte DCGT070201-FM2 WSM20S Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Chipbreaker: FM2 Form: Rhombus 55° Execution: T Tolerance class: G Material designation: S / M Core technical data Free angle: 7° Corner radius: 0.1 mm Plate size: 07 Plate thickness: 02 Rhombus angle: 55° Special features Coating: Tiger‑tec Silver Suitable for rostfreier Stahl (M) and heat‑resistant superalloys/titanium (S) FM2 chipbreaker for secure chip control Compact geometry for good surface quality FAQ Which materials is this insert suitable for? The DCGT070201‑FM2 WSM20S is intended for rostfreier Stahl (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), reflecting the Tiger‑tec Silver grade's focus on thermal and edge stability. What does the FM2 chipbreaker provide? The FM2 chipbreaker on the DCGT070201‑FM2 promotes consistent chip formation and evacuation, improving process stability when turning difficult materials and supporting better surface integrity. What are the key dimensional features to consider? Key dimensions include a 0.1 mm corner radius, 7° clearance angle, Plate size 07, Plate thickness 02 and a Rhombus 55° form, all relevant when selecting compatible toolholders. Is this insert suitable for finishing operations? Yes, the combination of a small corner radius and the tuned FM2 chipbreaker makes the insert well suited for fine finishing passes on rostfreier Stahl and other demanding alloys. Will this insert fit common DCGT toolholders? The DCGT070201‑FM2 designation corresponds to the standard DCGT indexable insert form and is compatible with matching DCGT toolholder systems when the correct size and clamping are used. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original and brand new.
DCGT070201-FN2 WNN10 Wendeplatten - Walter Tools
Take advantage of coated cemented carbide WNN10 together with a FN2 chipbreaker and a Rhombus 55° geometry to achieve consistent chip control and reliable contouring in production turning; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DCGT070201-FN2 WNN10 turning indexable insert by Walter Tools — coated cemented carbide, FN2 chipbreaker The DCGT070201-FN2 WNN10 is a compact turning insert designed for productive external turning and fine finishing tasks in general workshop and industrial turning operations Coated carbide grade WNN10 for versatility Rhombus 55° geometry for secure seating 0.1 mm corner radius for precise contouring FN2 chipbreaker tuned for stable chip control Greater process reliability from a coated carbide grade The WNN10 grade is a coated cemented carbide designed to deliver balanced performance across a broad range of turning tasks. As a result, the insert offers improved wear resistance compared with uncoated grades while maintaining cutting-edge stability. The coating reduces flank adhesion and heat-related wear, which translates into longer effective tool life and fewer index changes in batch production. In practical terms, this means fewer interruptions on the shop floor and a more predictable production rhythm — an economic advantage when consistent component quality is required. Geometry and chip control that support precision work The Rhombus 55° form combined with a 0.1 mm corner radius provides a fine compromise between edge strength and finishing capability. This geometry supports narrow clearance between insert and component, enabling precise contour definition and good surface finish without sacrificing edge security. The 7° relief angle reduces rubbing at the flank and helps maintain a stable cutting edge under moderate feeds. Together with the FN2 chipbreaker, the insert promotes short, controllable chips and reduces the risk of chip entanglement — a key benefit for turning centres and lathes where machine uptime and operator safety are priorities. Integration, specification and selection guidance Marked as DCGT070201-FN2 in the Walter range and designated DCGT070201-FN2 WNN10, the insert follows established format conventions (size 07, thickness 02) and is manufactured to tolerance class G. It is intended for use in toolholders that accept the DCGT geometry; matching the insert to the correct holder and cutting parameters ensures optimal performance. Note that the series is Walter Schneidstoffsorte - Serie offen and that material suitability should be verified using the manufacturer’s product matrix — this step is recommended to confirm the best feed and speed window for a given workpiece material. Correct selection reduces rework and improves the cost-efficiency of machining cycles. For application support or to purchase the Walter Tools DCGT070201-FN2 WNN10 insert with FN2 chipbreaker, please contact Metav Werkzeuge for tailored advice and ordering assistance — info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: DCGT070201-FN2-WNN10-WALTER Designation: DCGT070201-FN2 WNN10 Product type: Turning indexable insert Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.1 mm Insert shape: Rhombus 55° Size: 07 Thickness: 02 Tolerance class: G Special features Grade: WNN10 (coated cemented carbide) Chipbreaker: FN2 Series: Walter Schneidstoffsorte - Serie offen Execution: T Plate designation without grade: DCGT070201-FN2 ISO designation: DCGT070201-FN2 WNN10 Note: Check workpiece suitability with the product matrix FAQ What materials is this insert suited for? The DCGT070201-FN2 WNN10 insert is a coated cemented carbide grade intended for a broad material spectrum; verify specific workpiece suitability using the Walter product matrix for the WNN10 grade. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker promotes controlled, short chips and reduces chip stringing; this supports stable cutting and easier post-process handling when using the DCGT070201-FN2 insert. Is the insert compatible with standard DCGT toolholders? The insert follows the DCGT geometry (size 07, thickness 02) and is designed for holders that accept DCGT-style turning inserts; confirm holder compatibility before assembly. What advantage does the 0.1 mm corner radius provide? A 0.1 mm corner radius balances edge strength with the ability to produce fine surface finishes and precise contours, making it suitable for finishing passes and detailed profiles. Are there any special recommendations before use? Consult the Walter Tools product matrix for WNN10 to determine optimal feeds and speeds for the intended workpiece material; this ensures the best combination of tool life and surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DCGT070201-MN2 WN10 WN10 Wendeplatten - Walter Tools
Take advantage of the WN10 uncoated carbide grade and the MN2 chipbreaker for consistent chip control and reliable edge life; the combination of a Rhombus 55° form and a 7° clearance angle supports versatile turning across common tasks. Order availability and application advice are provided by Metav Werkzeuge for smooth production planning. DCGT070201-MN2 WN10 indexable turning insert — Rhombus 55°, 7° clearance — Walter Tools The DCGT070201-MN2 WN10 is an indexable turning insert designed for versatile general turning, offering stable chip formation and predictable edge performance in a compact Rhombus 55° geometry. Walter WN10 uncoated carbide grade Rhombus 55° geometry for versatile turning 7° clearance angle for reliable cutting MN2 chipbreaker for controlled chip formation Stable chip control for efficient productivity The combination of the MN2 chipbreaker and the WN10 uncoated carbide grade provides dependable chip formation, reducing the risk of long, tangled chips during continuous turning operations. This stability translates into fewer interruptions on the shop floor and more consistent cycle times, which supports higher throughput. The insert’s Rhombus 55° shape allows flexible toolpath strategies while the modest corner radius 0.1 mm gives a balance between surface finish and edge strength. Overall, the geometry and chipbreaker work together to lower process variability and improve machining predictability. Practical benefits for daily workshop use A small clearance angle of 7° and the compact plate size make this insert suitable for a range of turning set-ups where space and tool access matter. The modest radius aids fine finishing passes without sacrificing robustness for light roughing, and the tolerance class G ensures interchangeability in standard toolholders. With an uncoated cemented carbide composition, the insert is straightforward to specify across common operations; the result is uncomplicated handling and straightforward tool change routines that support lean production habits and reduced setup time. Guidance on material suitability and application The WN10 grade is an uncoated carbide designed for general-purpose turning; specific material suitability should be checked against the product matrix to confirm optimal application. The insert’s MN2 chipbreaker is tailored to provide reliable evacuation and control in typical metal-cutting conditions. For finish-oriented tasks the 0.1 mm corner radius assists in achieving good surface quality, while the Rhombus 55° form supports both external and light profiling work. Technical selection should match component tolerances and desired surface integrity for best results. For availability, application recommendations or to request batch details for Walter Tools WN10 inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable variants and delivery options Technical data Article number: DCGT070201-MN2-WN10-WALTER Label: Drehwendeschneidplatte DCGT070201-MN2 WN10 Walter Tools Type: Indexable turning insert Series: Walter Schneidstoffsorte - Serie offen Grade: WN10 ISO designation: DCGT070201-MN2 WN10 Core data Corner radius: 0.1 mm Clearance angle: 7° Plate size: 07 Plate thickness: 02 Tolerance class: G Special features Plate form: Rhombus 55° Chipbreaker: MN2 Carbide class: uncoated cemented carbide Execution: T Material note: Katalogabhängig FAQ What materials is this insert suited for? The WN10 grade is an uncoated cemented carbide intended for general turning; material suitability should be verified against the product matrix for specific workpiece materials and machining conditions. How is the DCGT070201-MN2 WN10 identified on the tool list? Identification is by the ISO designation DCGT070201-MN2 WN10 and the Walter Tools label; the Rhombus 55° form, MN2 chipbreaker and 0.1 mm corner radius are additional distinguishing features. Is this insert appropriate for finishing operations? With a corner radius of 0.1 mm and the Rhombus 55° geometry, the insert can be used for fine finishing passes where a balance of surface quality and edge strength is required. Can the insert be used in compact toolholders? The compact plate size and the 7° clearance angle make the insert compatible with many tight-access turning set-ups; holder compatibility should be confirmed with the tool clamping specifications. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker is designed to produce controlled chip formation, which helps maintain steady cutting conditions and reduces interruptions caused by poor chip evacuation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification and identification purposes only. The offered article is an original, factory-new item from the manufacturer.
DCGT070201-MN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the WNN10 coated-carbide grade and the compact rhombic 55° geometry for reliable, repeatable turning; the small 0.1 mm corner radius and MN2 chipbreaker combine to improve surface finish and chip control. Order directly via Metav Werkzeuge or consult the technical advisors for cutting-parameter recommendations. DCGT070201-MN2 WNN10 – Rhombic 55° turning insert, 7° clearance | Walter Tools A DCGT070201-MN2 WNN10 turning indexable insert engineered for finishing and general turning where a narrow corner radius and controlled chip formation are required Coated carbide grade WNN10 Rhombic 55° geometry 0.1 mm corner radius 7° clearance angle Consistent performance through a modern carbide grade The combination of a coated carbide substrate and the Walter WNN10 designation provides a balance of wear resistance and edge stability for a wide range of turning tasks. The coating reduces flank wear and extends tool life under stable cutting conditions, which supports higher overall productivity and fewer tool changes. For workshop planners and production engineers this means more predictable cycle times and a reduction in unscheduled interruptions. Selection of the correct cutting data should follow the product matrix in the catalogue to match the workpiece material and machining strategy. Precise geometry that improves surface finish and access The rhombic 55° form with a 0.1 mm corner radius and a 7° clearance angle is optimised for fine finishing and features where a sharper entry angle is advantageous. This geometry enables better tool access in shoulder and profile turning while maintaining contact conditions that favour a consistent surface quality. The smaller corner radius assists in achieving close tolerances on detail features, whereas the clearance angle helps avoid rubbing on the workface, reducing heat build-up and improving dimensional stability of the machined component. Reliable chip control and shorter process cycles Equipped with the MN2 chipbreaker, the insert channels swarf into short, controllable chips that simplify disposal and reduce the risk of entanglement. This chipforming characteristic supports uninterrupted operation and fewer tool interventions, contributing to a lower overall machining cost per part. The insert is supplied in execution T with tolerance class G, plate thickness 02 and plate size 07, allowing consistent clamping and predictable repeatability when used in suitable toolholders for standard turning operations. Practical integration and material guidance The insert is part of the Walter Schneidstoffsorte series and is listed as catalogue-dependent for material suitability; confirmation of compatibility with specific workpiece alloys is therefore recommended before series production. Its compact form and coated-carbide composition make it well suited to general turning and finishing applications across many steels and non-ferrous materials when matched with appropriate cutting data. As a brand from Walter Tools, this product benefits from established tooling expertise and production support within the group, which helps maintain consistent results in everyday workshop environments. Contact Metav Werkzeuge for tailored cutting data and to order Walter Tools DCGT070201-MN2 WNN10 inserts directly, or request advice on selecting the optimal grade for a given application Technical data Article number / SKU: DCGT070201-MN2-WNN10-WALTER Designation: DCGT070201-MN2 ISO designation: DCGT070201-MN2 WNN10 Manufacturer: Walter Tools Product type: Drehwendeschneidplatte (turning indexable insert) Series: Walter Schneidstoffsorte - Serie offen Core measurements Clearance angle: 7° Corner radius: 0.1 mm Plate form: Rhombus 55° Plate size: 07 Plate thickness: 02 Tolerance class: G Features and materials Chipbreaker: MN2 Grade: WNN10 (coated carbide) Execution: T Material suitability: catalogue-dependent Product UID: DCGT070201-MN2-WNN10-WALTER FAQ What materials is this insert suitable for? The DCGT070201-MN2 WNN10 is a coated carbide grade and its suitability depends on the specific workpiece material; compatibility should be verified in the manufacturer's product matrix. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker produces short, manageable chips that reduce swarf handling issues and support more reliable, uninterrupted cutting cycles. What advantages does the rhombic 55° geometry offer? A rhombic 55° insert improves access to profiles and shoulders while aiding surface finish, particularly when combined with a small corner radius. Can this insert be used for finishing operations? Yes; the 0.1 mm corner radius and the 7° clearance angle make the insert well suited to finishing and precision turning tasks. How is the tolerance class indicated and what does it mean? The insert is supplied in tolerance class G, which denotes the manufacturing tolerances for fit and repeatability in standard toolholder systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation between our company and the referenced manufacturers. The offered item is an original, factory-new product from the manufacturer Walter Tools.
DCGT070202-FM2 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of durable cutting performance, secure chip control and a geometry optimised for rostfreier Stahl and heat‑resistant alloys; the grade and chipbreaker ensure reliable edge life and consistent surface finish in production. Order the DCGT070202-FM2 WSM01 directly via Metav Werkzeuge or consult their specialists for application advice. DCGT070202-FM2 WSM01 turning insert — Rhombic 55°, FM2 chipbreaker by Walter Tools The DCGT070202-FM2 WSM01 is a coated carbide turning insert engineered for machining rostfreier Stahl and heat‑resistant superalloys, combining a compact Rhombic 55° form with a fine 0.2 mm corner radius and FM2 chip control for stable cutting in demanding applications. Tiger‑tec Silver coating for improved wear resistance WSM01 grade optimised for rostfreier Stahl and superalloys FM2 chipbreaker for predictable chip formation Rhombic 55° geometry with 7° clearance angle Increased productivity when machining tough materials The combination of the Tiger‑tec Silver series and the WSM01 grade provides a balance of wear resistance and edge stability that translates into longer tool life and fewer interruptions. Designed for hard‑to‑machine alloys and, depending on geometry, rostfreier Stahl, the insert supports higher cutting volumes with consistent performance. The coated carbide substrate ensures improved thermal and mechanical resistance compared with uncoated grades, which directly reduces processing downtime and contributes to a predictable production flow. Reliable chip control and surface quality in serial production The FM2 chipbreaker is engineered for stable chip formation under the strains typical of machining rostfreier Stahl and heat‑resistant materials. By promoting short, controllable chips, this geometry reduces the risk of surface damage and tool interference, which helps to maintain part tolerances and surface finish during longer production runs. The controlled chip flow also simplifies chip evacuation in automated and semi‑automated turning centres, supporting efficient downstream handling and safer operation. Geometry and micro‑features tuned for repeatable accuracy A Rhombic 55° insert form combined with a 7° clearance angle and a 0.2 mm corner radius offers a reliable cutting edge for both finishing and semi‑finishing operations. These geometric parameters provide a favourable balance between cutting strength and access to narrow profiles, while the fine corner radius supports good surface integrity. In practice, this results in repeatable dimensional control and fewer rework cycles in batch production, improving overall process capability. Suitability and application guidance for workshop integration Marked for ISO groups M and S, this indexable insert is suited to machining rostfreier Stahl (group M) and heat‑resistant superalloys and titanium (group S). The WSM01 coated carbide grade has been developed to handle the adhesion tendencies and thermal challenges of these materials, helping to prevent build‑up on the cutting edge and preserve tool geometry. For tailored performance, match the insert to appropriate toolholders and set conservative start parameters when switching from conventional steels to these demanding alloys. Contact Metav Werkzeuge for technical advice and availability of the Walter Tools DCGT070202-FM2 WSM01, optimised for rostfreier Stahl and superalloys Technical Data SKU: DCGT070202-FM2-WSM01-WALTER Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Chipbreaker: FM2 Form: Rhombic 55° Corner radius: 0.2 mm Clearance angle: 7° Plate size: 07 Thickness: 02 Tolerance class: G Execution: T Material designation: S / M Facts Corner radius: 0.2 mm Clearance angle: 7° Plate format: 07 Thickness designation: 02 Tolerance class: G Special features Coated carbide grade (WSM01) Tiger‑tec Silver coating for enhanced wear resistance Suitable for rostfreier Stahl (ISO M) Suitable for heat‑resistant superalloys and titanium (ISO S) FM2 chipbreaker for controlled chips Rhombic 55° geometry for versatile turning applications FAQ What materials is this insert intended for? The DCGT070202-FM2 WSM01 is designed primarily for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), with the WSM01 grade providing thermal and edge stability for these materials. Which chipbreaker is fitted and what benefit does it provide? The insert uses the FM2 chipbreaker, which delivers predictable short chips and improved evacuation, supporting safer, cleaner turning operations and better surface quality. How does the Tiger‑tec Silver series affect tool life? The Tiger‑tec Silver series enhances wear resistance and thermal behaviour of the coated carbide, contributing to longer edge life and more consistent cutting performance in demanding applications. Is the geometry suited for finishing or roughing? With a Rhombic 55° form and a 0.2 mm corner radius, the insert is suitable for finishing and light semi‑finishing; selection of depth of cut and feed should reflect the workpiece material and machining strategy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGT070202-FM2 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver heat resistance and the FM2 chipbreaker for reliable chip control; the rhombic 55° insert with a 0.2 mm corner radius and 7° clearance supports stable cutting in rostfreier Stahl and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or contact our consultants for tailored application advice. DCGT070202-FM2 WSM10S indexable turning insert, Tiger‑tec Silver for rostfreier Stahl and superalloys — Walter Tools A DCGT070202-FM2 WSM10S indexable turning insert engineered for stable cutting and secure chip formation when machining rostfreier Stahl and heat‑resistant superalloys Tiger‑tec Silver coated WSM10S grade for heat resistance FM2 chipbreaker for controlled chip formation Rhombic 55° geometry for versatile turning applications 0.2 mm corner radius with 7° clearance angle Consistent chip control and higher process reliability The combination of the FM2 chipbreaker and the Tiger‑tec Silver coating produces reproducible chip shapes and reduces the risk of built‑up edge during continuous turning operations. The chipbreaker design is optimised for moderate to heavy chip loads, which improves tool life and lowers the frequency of insert changes. For production environments working with rostfreier Stahl or heat‑resistant alloys, this means fewer interruptions and more consistent cycle times, supporting predictable throughput and reduced scrap rates. Robust edge stability for difficult‑to‑machine materials The WSM10S grade is a coated carbide designed specifically for materials that generate heat and challenge the cutting edge, such as rostfreier Stahl and nickel‑based superalloys. The coating increases thermal resistance while preserving a stable cutting edge, which results in improved wear behaviour and longer usable life of the insert. This technical choice translates into tangible economic benefits through extended tool life and lower tool consumption per component. Geometry that supports flexible turning strategies The rhombic 55° shape with a 0.2 mm corner radius and 7° clearance angle offers a balance between strength and accessibility in internal and external turning. The geometry enables modest radii for finishing passes while still providing enough support for interrupted cuts when required. For machinists planning tool paths, the insert’s profile simplifies setup choices: it is suitable for a range of feed rates and can be used in both roughing and light finishing with predictable surface outcomes. Practical handling and system compatibility This insert format is compatible with a wide range of standard toolholders and clamping systems used in turning centres. The nominal designation and clear ISO‑style marking make replacement and stock management straightforward. Because the insert is part of an established series, users benefit from documented cutting data and proven application notes for rostfreier Stahl and high‑temperature alloys, easing integration into existing production processes and reducing ramp‑up time for new operations. Contact Metav Werkzeuge for application recommendations and fast supply of Walter Tools Tiger‑tec Silver WSM10S inserts Technical data SKU: DCGT070202-FM2-WSM10S-WALTER Article designation: DCGT070202-FM2 WSM10S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM10S Product type: indexable turning insert Facts Clearance angle: 7° Corner radius: 0.2 mm Insert size: 07 Thickness: 02 Tolerance class: G Shape: Rhombus 55° Special features Coating: Tiger‑tec Silver Chipbreaker: FM2 Material applicability: S / M Suitable for rostfreier Stahl and heat‑resistant superalloys FAQ Which materials are suitable for this insert? The DCGT070202-FM2 WSM10S insert is optimised for rostfreier Stahl and heat‑resistant superalloys (group S and M), offering stable cutting behaviour in these demanding materials. What is the purpose of the FM2 chipbreaker? The FM2 chipbreaker on the WSM10S grade promotes controlled chip formation and reduces the risk of built‑up edge, improving process stability for both continuous and interrupted turning. Can this insert be used for finishing operations? Yes, the rhombic 55° geometry with a 0.2 mm corner radius supports light finishing passes while maintaining edge strength for moderate cutting conditions. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating enhances thermal resistance and wear performance, extending insert life under high temperatures and reducing tool change frequency for the DCGT070202-FM2 WSM10S insert. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGT070202-FM2 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of a coated carbide grade engineered for demanding materials: the combination of Tiger·tec Silver technology and the WSM20S grade ensures stable chip formation and a durable cutting edge for high-temperature alloys and rostfreier Stahl; order through Metav Werkzeuge or request further application advice from their specialists. DCGT070202-FM2 WSM20S indexable turning insert – Tiger·tec Silver, 7° relief (Walter Tools) The DCGT070202-FM2 WSM20S is an indexable turning insert designed for secure, productive machining of rostfreier Stahl and heat‑resistant superalloys, delivering controlled chip formation and consistent edge life. Tiger·tec Silver coating for high thermal resistance WSM20S coated carbide for rostfreier Stahl and superalloys Rhombic 55° form with 0.2 mm corner radius 7° relief and FM2 chipbreaker for stable chips Increased productivity through advanced coating and grade The combination of the Tiger·tec Silver coating and the WSM20S grade provides a balance of heat resistance and edge strength that translates directly into more reliable cycle times when working with demanding materials. Coated carbide improves thermal stability at the cutting zone and reduces the risk of adhesive wear; as a result, tool life becomes more predictable and downtime is reduced. This technical pairing is particularly suitable for components where consistent performance on rostfreier Stahl or titanium‑containing alloys matters to throughput. Predictable chip control and better surface integrity The integrated FM2 chipbreaker together with the rhombic 55° geometry and a 0.2 mm corner radius promotes controlled chip formation and evacuation. For operations prone to built‑up edge or poor chip evacuation—typical with rostfreier Stahl and nickel‑based superalloys—this geometry supports stable cutting forces and improves surface finish. The moderate corner radius helps to distribute cutting stresses without compromising dimensional accuracy, making the insert well suited for medium to finishing passes where surface quality is a priority. Robust geometry for versatile turning operations A relief angle of 7° creates a favourable clearance for many turning setups while maintaining cutting edge support. The insert’s designation and form ensure compatibility with standard rhombic toolholders and allow straightforward indexation to a fresh cutting edge. As the grade is a coated carbide, the insert combines toughness with wear resistance, which reduces the frequency of tool changeovers and simplifies inventory management for production environments that process a mix of rostfreier Stahl and difficult‑to‑cut alloys. Practical application guidance and pairing recommendations For best results, pair the insert with a rigid toolholder and a stable clamping setup to exploit the grade’s edge stability. When machining rostfreier Stahl or heat‑resistant alloys, moderate cutting speeds and higher feed rates often improve chip breaking and heat distribution; the WSM20S grade is developed to support such strategies. Where possible, match coolant and machining parameters to the workpiece to avoid thermal shock; the insert’s coating and chipbreaker will assist in maintaining consistent performance across sequential parts. For application-specific advice or to place an order for Walter Tools inserts, contact Metav Werkzeuge – their technical team can recommend grades and toolholder pairings to match production goals. Technical data Article number: DCGT070202-FM2-WSM20S-WALTER Designation: DCGT070202-FM2 WSM20S Series: Tiger·tec Silver Product type: indexable turning insert Manufacturer: Walter Tools Core data Relief angle: 7° Corner radius: 0.2 mm Size designation: 07 Thickness designation: 02 Tolerance class: G Special features Coating: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: FM2 Form: Rhombic 55° ISO designation: DCGT070202-FM2 WSM20S Suitable for rostfreier Stahl and heat‑resistant superalloys / titanium FAQ What materials is this insert designed for? The DCGT070202-FM2 WSM20S insert is formulated for rostfreier Stahl and heat‑resistant superalloys, with the WSM20S grade offering improved heat resistance and edge stability for these groups. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker on this insert promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and helping to maintain consistent surface finish during turning operations. Which toolholder geometry suits this insert? A rhombic toolholder compatible with a 55° insert form and secure clamping is recommended to make full use of the insert’s geometry and to ensure safe indexation of the cutting edges. Is the insert coated, and what benefit does the coating provide? Yes, the insert uses the Tiger·tec Silver coating; this enhances thermal resistance and wear performance, which is especially beneficial when machining materials that generate high cutting temperatures. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
DCGT070202-FN2 WN10 WN10 Wendeplatten - Walter Tools
Benefit from a robust combination of stable chip formation and versatile geometry: the WN10 uncoated carbide grade together with the FN2 chipbreaker and a 0.2 mm corner radius deliver consistent surface quality and reliable tool life in general turning tasks. Order the insert directly via Metav Werkzeuge or consult our specialists for process-adapted recommendations. DCGT070202-FN2 WN10 — Turning indexable insert with FN2 chipbreaker and Rhombus 55° — Walter Tools DCGT070202-FN2 WN10 is a rhombic 55° turning indexable insert designed for general turning operations where stable chip control and repeatable performance are required Uncoated carbide grade WN10 FN2 chipbreaker for stable chip control Rhombus 55° insert form 0.2 mm corner radius for fine finishing Consistent cutting performance from an uncoated carbide grade The open-series WN10 grade is an uncoated carbide designed for dependable, everyday turning applications. Its composition favours steady wear behaviour and predictable performance, which helps to reduce scrap rates and stabilise cycle times. Where process reliability matters, the combination of this grade with the insert’s geometry reduces the need for frequent tool changes and supports continuous production runs. It is important to verify the recommended workpiece materials against the product matrix before selection. Geometry and chip control that improve surface finish The FN2 chipbreaker and Rhombus 55° form work together to produce controlled chip breaking and a consistent cutting edge engagement. The 0.2 mm corner radius assists in achieving a smoother surface finish while maintaining edge strength for light to medium roughing and finishing passes. The 7° clearance angle helps to reduce rubbing at the flank and lowers cutting forces, which contributes to dimensional accuracy and longer insert life. Practical advantages in everyday turning processes This insert’s construction and tolerance class G ensure interchangeability and predictable seating in standard toolholders. The compact insert size and thickness balance rigidity with accessibility in confined setups, enabling productive machining of stepped parts and shoulder operations. Where cycle efficiency is a priority, the insert’s predictable wear pattern lets planners rely on stable machining windows and consistent part quality. Choosing the right insert and integrating it into the process Select this indexable cutting insert when the application requires a versatile geometry coupled with reliable chip control for general turning tasks. Confirm workpiece compatibility—the WN10 specification is uncoated carbide and its suitability depends on the material and cutting data matrix provided by the manufacturer. For tailored recommendations regarding speeds, feeds and coolant strategy, consult technical documentation or an application specialist to achieve optimum tool life and surface integrity. Choose Walter Tools' DCGT070202-FN2 WN10 insert for reliable general turning — contact Metav Werkzeuge for application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DCGT070202-FN2-WN10-WALTER Designation: DCGT070202-FN2 WN10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Execution: T Chipbreaker: FN2 Facts Clearance angle: 7° Corner radius: 0.2 mm Insert form: Rhombus 55° Insert size: 07 Thickness: 02 Tolerance class: G Special features Grade: uncoated carbide (WN10) Chip control: FN2 Base designation: DCGT070202-FN2 Material: catalogue-dependent Note: Check material suitability in product matrix FAQ What materials is this insert suited for? The DCGT070202-FN2 WN10 insert is an uncoated carbide grade; suitability depends on the workpiece material—consult the product matrix to confirm compatibility for specific steels or alloys. How does the FN2 chipbreaker affect process stability? The FN2 chipbreaker provides controlled chip formation that reduces entanglement and supports consistent cutting forces, which improves process stability when using the Walter Tools turning insert. What role does the 0.2 mm corner radius play? A 0.2 mm corner radius balances edge strength and surface finish, helping to achieve smoother part faces during finishing passes with lower risk of edge chipping. Is the insert compatible with standard toolholders? The rhombic 55° form and tolerance class G ensure compatibility with common holders for this insert shape; verify holder specifications against the insert designation DCGT070202-FN2 WN10. Where to get cutting data for this insert? Cutting parameters and application recommendations for the Walter Tools DCGT070202-FN2 WN10 insert are available from the manufacturer’s data sheets or via Metav Werkzeuge’s application support. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered product designations are used solely for explanation. There is no affiliation between our company and the named brands. The item offered is an original, factory-new product of the manufacturer; Walter Tools is mentioned where relevant.
DCGT070202-FN2 WNN10 WNN10 Wendeplatten - Walter Tools
Take advantage of the coated carbide WNN10 grade combined with a rhombic 55° geometry and a 0.2 mm corner radius for stable, repeatable turning results; request specification support or order the insert through Metav Werkzeuge for rapid processing. DCGT070202-FN2 WNN10 indexable turning insert by Walter Tools — rhombic 55°, 7° clearance The DCGT070202-FN2 WNN10 is an indexable turning insert engineered for general turning operations where consistent edge life and predictable chip control are required. Coated carbide grade WNN10 Rhombic 55° geometry for versatile turning 0.2 mm corner radius for fine profile work 7° clearance angle for reliable cutting action FN2 chipbreaker for controlled swarf formation Productive and predictable cutting performance The combination of a coated carbide substrate and the WNN10 grade delivers a balance of wear resistance and toughness that supports continuous production. The insert’s FN2 chipbreaker is designed to manage chips in medium to light turning, reducing downtime caused by poor chip control. For production planners, this translates into fewer interruptions and a more consistent component finish. Geometry that stabilises the cutting process The rhombic 55° shape with a 7° clearance angle provides a stable seating in standard toolholders and a geometry suitable for both profiling and light shoulder turning. The 0.2 mm corner radius permits fine edge detail while maintaining acceptable strength at the cutting edge; this results in consistent dimensional accuracy on turned parts and predictable insert wear rates over multiple indexings. Practical selection and application guidance This insert is a coated, indexable turning grade that fits toolholders designed for DCGT-style inserts. The WNN10 coating and substrate combination is intended for a broad range of general-purpose turning tasks—check the workpiece material matrix for specific suitability. The insert thickness and form support multiple clampings and re-indexings, helping to lower tool cost per part when used under recommended cutting conditions. Benefits for workshop efficiency and quality control Using a standardised insert geometry such as this reduces setup variation between operators and machines, improving repeatability across batches. The combination of coating and the FN2 chipbreaker contributes to surface finish consistency and reduced burr formation, which eases downstream inspection and finishing processes. In short, the insert supports both efficiency and component quality in high-mix or repetitive environments. For tailored technical advice on Walter Tools inserts or to specify quantities with Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support and order handling Technical data Article number: DCGT070202-FN2-WNN10-WALTER Label: Drehwendeschneidplatte DCGT070202-FN2 WNN10 Walter Tools Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 55° Plate size: 07 Plate thickness: 02 Tolerance class: G Special features Chipbreaker: FN2 Grade: WNN10 Series: Walter Schneidstoffsorte - Serie offen Base designation: DCGT070202-FN2 Execution: T Material specification: Katalogabhängig Product type: Drehwendeschneidplatte FAQ What applications suit this indexable insert best? The DCGT070202-FN2 WNN10 insert by Walter Tools is designed for general turning tasks where controlled chip formation and consistent edge life are priorities; it is suitable for profiling and light shoulder work. Which chip formation behaviour can be expected from the FN2 chipbreaker? The FN2 chipbreaker on the WNN10 grade promotes medium to short chips under typical turning parameters, improving chip evacuation and reducing interruptions. How does the 0.2 mm corner radius affect component finish? A 0.2 mm corner radius offers a compromise between fine edge definition and edge strength, delivering good surface finish while maintaining resistance to chipping during production. Is the WNN10 grade appropriate for a wide range of materials? WNN10 is a coated carbide grade intended as a general-purpose option; material suitability should be checked against the product matrix and specific workpiece requirements. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGT070202-MN2 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of a WN10 uncoated carbide grade, the MN2 chipbreaker and a precise 0.2 mm corner radius for reliable, economical turning operations; order the insert directly via Metav Werkzeuge or consult our technical team for application matching. DCGT070202-MN2 WN10 indexable turning insert — Rhombic 55° geometry, MN2 chipbreaker — Walter Tools The DCGT070202-MN2 WN10 is a rhombic 55° indexable turning insert designed for general turning tasks where predictable chip formation and fine-detail edge control are required Uncoated carbide grade WN10 MN2 chipbreaker for reliable chip control Rhombic 55° geometry for versatile turning 0.2 mm corner radius for fine detail Dependable performance from an uncoated carbide grade The WN10 designation denotes an uncoated carbide grade intended for economical, general-purpose turning where tool cost-efficiency and consistent wear behaviour are priorities. As an indexable insert, it offers repeatable edge replacement without regrinding, reducing machine downtime and simplifying inventory. The use of an uncoated cemented carbide typically means predictable wear progression and straightforward regrinding options where applicable; these characteristics make the insert a practical choice for routine finishing and semi-finish cuts in production environments that prioritise throughput and process stability. Controlled chips and improved surface results with MN2 and geometry The integrated MN2 chipbreaker is engineered to promote regular chip segmentation and evacuation, reducing the risk of built-up edge and improving process reliability. Combined with the rhombic 55° form and a 0.2 mm corner radius, the geometry supports cleaner part surfaces and reduces the necessity for secondary finishing. The insert’s relief angle 7° helps to limit rubbing and thermal loading at the cutting edge, which supports longer steady cutting intervals and consistent surface quality — an advantage for series production where repeatability is crucial. Standardised form for straightforward toolholder integration The ISO designation DCGT identifies the insert’s rhombic profile and standardised interface dimensions, enabling compatibility with a wide range of commercial toolholders designed for 55° diamond inserts. The nominal size and thickness coding (insert size 07, thickness 02) indicate compact dimensions suited to medium to light turning operations and allow for accurate tool setting in modular turning systems. For machine shops, the standard form factor simplifies tooling logistics and reduces the need for bespoke holder solutions, while the tolerance class G supports predictable clamping and repeatable seating. Selection guidance and application verification Material suitability for this insert is determined by the specific product matrix and the intended cut; the WN10 grade is uncoated and therefore its suitability should be checked against workpiece material and cutting parameters. The insert is supplied in the Walter Schneidstoffsorte — Serie offen and in execution T, which may influence handling during tool assembly. For shops seeking to match insert geometry and grade to particular alloys or process windows, a brief specification review with tooling consultants is recommended to ensure optimal tool life and part quality. Contact Metav Werkzeuge for specification matching and procurement of Walter Tools inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DCGT070202-MN2-WN10-WALTER Label: Drehwendeschneidplatte DCGT070202-MN2 WN10 Walter Tools ISO designation: DCGT070202-MN2 WN10 Facts Corner radius: 0.2 mm Relief angle: 7° Insert size: 07 Thickness: 02 Special features Chipbreaker: MN2 Geometry: Rhombic 55° Grade: WN10 (uncoated carbide) Series: Walter Schneidstoffsorte - Serie offen Tolerance class: G Execution: T FAQ What materials is this insert suitable for? Material suitability should be verified against the product matrix; the WN10 grade is an uncoated carbide and must be matched to workpiece material and cutting conditions for optimal results. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker promotes regular chip segmentation and evacuation, improving process reliability and reducing the likelihood of built-up edge during turning with Walter Tools turning inserts. Is the DCGT form compatible with standard toolholders? Yes, the DCGT ISO designation indicates a standardised rhombic 55° form intended for compatibility with commercially available toolholders for 55° diamond inserts. What does the insert coding 070202 tell me? The numeric sequence denotes the insert size and proportions (size 07 and thickness 02) and, together with the DCGT code, helps to identify the correct tooling geometry and seating for the toolholder. Can this insert be recoated or reground? The WN10 grade is supplied as uncoated carbide; reconditioning options depend on shop capabilities and should be evaluated against the insert’s nominal dimensions and tolerance class G. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory-new merchandise of the manufacturer Walter Tools.
DCGT070202-MN2 WNN10 WNN10 Wendeplatten - Walter Tools
Benefit from the combination of a precise rhombic 55° geometry, a reliable WNN10 coated carbide grade and the MN2 chipbreaker for stable chip formation and consistent surface finish; order the DCGT070202-MN2 WNN10 turning insert directly via Metav Werkzeuge or ask our consultants if needed. DCGT070202-MN2 WNN10 — Turning insert, rhombic 55° geometry, Walter Tools The DCGT070202-MN2 WNN10 is a rhombic 55° turning insert intended for medium to fine finishing operations, offering a compact corner radius and a chipbreaker optimised for controlled chips Coated carbide WNN10 grade Rhombus 55° geometry 0.2 mm corner radius MN2 chipbreaker for controlled chips Reliable finishing with consistent chip control The rhombic 55° geometry combined with a 0.2 mm corner radius gives a fine balance between strength at the cutting edge and the ability to produce a high-quality surface. The integrated MN2 chipbreaker controls fragment size and evacuation, reducing the risk of surface damage and tool rubbing. For producers seeking repeatable finishing results, this geometry supports tighter tolerances and stable cutting forces during light to moderate depth cuts. Coated carbide grade designed for productivity The WNN10 grade is a coated carbide composition developed for broad applicability and improved tool life in finishing tasks. As a coated indexable insert, it offers wear resistance and consistent edge retention, which reduces tool-change frequency and increases uptime. Material suitability should be checked in the product matrix for specific workpiece types to ensure the best cutting parameters and coolant strategy for each application. Geometry and dimensions that simplify process planning Key dimensions such as the rhombic 55° form, a relief angle of 7°, size designation 07 and plate thickness 02 make the insert predictable in machining cycles and compatible with common toolholder families. The compact corner radius and defined tolerance class G enable precise machining strategies where surface quality and dimensional repeatability matter. Such geometry assists in optimising feed and speed to match finishing requirements. Practical integration into production workflows The insert's standard format and chip control characteristics ease integration into existing tool sets and processes. While clamping and holder compatibility should be confirmed with the toolholder manufacturer, the insert’s standardised designation simplifies procurement and tool inventory management. For specific cutting data and holder recommendations, refer to the technical matrix or contact Metav Werkzeuge for tailored selection support. Contact Metav Werkzeuge for personalised machining recommendations on Walter Tools turning inserts or to place an order for the DCGT070202-MN2 WNN10 via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DCGT070202-MN2-WNN10-WALTER ISO designation: DCGT070202-MN2 WNN10 Grade: WNN10 Product type: Turning insert (indexable) Facts Relief angle: 7° Corner radius: 0.2 mm Insert form: Rhombus 55° Size: 07 Thickness: 02 Tolerance class: G Special features Coated carbide grade WNN10 Chipbreaker type MN2 Series: Walter Schneidstoffsorte - Serie offen Material: catalogue-dependent FAQ What materials is this insert suitable for? Material suitability depends on the cutting application and should be verified in the product matrix; the DCGT070202-MN2 WNN10 is a coated carbide grade intended for a broad range of finishing tasks. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker promotes controlled chip formation and evacuation, which helps to maintain stable cutting forces and consistent surface quality with the DCGT070202-MN2 WNN10 insert. Can this insert be used for roughing operations? The geometric and grade characteristics are optimised for medium to fine finishing; heavy roughing may require a different insert geometry or a larger corner radius. What should be checked before installation? Confirm toolholder compatibility and clamping type for secure mounting; check the product matrix for recommended cutting parameters when using the DCGT070202-MN2 WNN10. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com