DCGT070202-MN2 WSM01 Wendeplatten - Walter Tools
The combination of the Tiger‑tec Silver coating and the WSM01 grade provides high wear resistance and stable cutting behaviour, making this insert a dependable choice for challenging turning tasks; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DCGT070202-MN2 WSM01 turning insert by Walter Tools — Tiger‑tec Silver, for stainless steels and superalloys The DCGT070202-MN2 WSM01 is a rhombic 55° turning insert designed for productive machining of stainless steels and heat-resistant superalloys, offering reliable edge life and controlled chip formation. Tiger‑tec Silver grade WSM01 MN2 chipbreaker for secure chip control Rhombic 55° form for versatile turning Corner radius 0.2 mm for fine finishes Increased process reliability for demanding materials The high-performance Tiger‑tec Silver series combined with the WSM01 coated carbide grade delivers consistent wear resistance and thermal stability during heavy-duty turning. The MN2 chipbreaker promotes secure chip control when machining tough materials, reducing the risk of built-up edge and heat concentration. This translates into longer tool life and fewer interruptions for regrinding, which benefits batch production and hard-to-machine components in aerospace or energy sectors. The design focusses on measurable improvements in productivity and repeatability rather than marketing claims, so toolrooms can expect predictable cutting performance under elevated cutting temperatures. Geometry tuned for consistent surface quality and dimensional control The rhombic 55° geometry and corner radius 0.2 mm provide a balanced combination of strength at the cutting edge and the ability to produce fine surface finishes. A 7° free angle reduces rubbing on the flank, which helps to maintain workpiece tolerance and surface integrity when turning materials that are prone to work hardening. The insert’s tolerance class G ensures consistent fit in precision toolholders, supporting stable cutting conditions and reducing vibration. These geometric parameters are particularly useful when tight dimensional control is required alongside efficient material removal. Practical advantages that support workshop productivity The compact size code 07 and thickness code 02 simplify inventory management and compatibility checks with common toolholders, while the coated substrate reduces maintenance intervals. The insert’s suitability for stainless steels (M) and superalloys/titanium (S) broadens its application range across toolmaking, medical, and high-temperature components, enabling fewer tool changes and more flexible machining schedules. By focusing on proven technical details such as chip control and edge stability, the insert supports both one-off precision jobs and higher-volume production runs, improving overall shopfloor throughput and reducing unplanned downtime. For tailored machining recommendations and current availability of the DCGT070202-MN2 WSM01 Tiger‑tec Silver turning inserts, contact Metav Werkzeuge for expert advice and stock information Technical data SKU: DCGT070202-MN2-WSM01-WALTER Article: DCGT070202-MN2 WSM01 Series: Tiger‑tec Silver Grade: WSM01 Manufacturer: Walter Tools Facts Free angle: 7° Corner radius: 0.2 mm Shape: Rhombus 55° Size code: 07 Thickness code: 02 Tolerance class: G Special features Chipbreaker: MN2 Coating: coated carbide Suitable for: stainless steels (M), superalloys and titanium (S) Execution: T FAQ What materials is this insert intended for? The DCGT070202-MN2 WSM01 insert is specified for stainless steels and heat-resistant superalloys (ISO groups M and S), matching the WSM01 grade and Tiger‑tec Silver series design. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker supports controlled chip formation and evacuation when cutting ductile or high-temperature alloys, which reduces tendency to form built-up edge and helps maintain consistent surface quality. What does the rhombic 55° form mean in practice? A rhombic 55° insert offers versatility for both finishing and light roughing, giving good access to shoulders and allowing multiple cutting-edge orientations in a standard turning toolholder. Is the corner radius suitable for fine finishing operations? The corner radius 0.2 mm is intended for fine to medium finishing, balancing edge strength with the ability to achieve improved surface finishes on critical components. What tolerance and fit can be expected from this insert? Tolerance class G indicates consistent manufacturing precision, ensuring reliable seating in the holder and predictable repeatability for serial production. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. The Walter AG (brand: Walter Tools) is one of the leading manufacturers of precision metalworking tools and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer.
DCGT070202FS-1 WDN10 WDN10 Wendeplatten - Walter Tools
The combination of polycrystalline diamond (PKD) cutting material and a defined 0.2 mm corner radius delivers exceptionally long tool life and consistent surface quality when machining abrasive non‑ferrous workpieces; order the insert via Metav Werkzeuge or contact the technical team for application support. DCGT070202FS-1 WDN10 indexable turning insert (PKD, Rhombus 55°) – Walter Tools The DCGT070202FS-1 WDN10 is an indexable insert engineered for high‑wear machining of non‑ferrous and abrasive non‑iron materials, offering PKD cutting edges in a Rhombus 55° geometry. PKD grade WDN10 for extreme wear resistance Rhombus 55° geometry for versatile cutting 7° clearance angle for reduced rubbing 0.2 mm corner radius for fine finishing Durable cutting performance for abrasive non‑ferrous materials This insert uses polycrystalline diamond (PKD) in the WDN10 grade to provide high abrasion resistance and prolonged service life when cutting abrasive, non‑iron workpieces. PKD is a ceramic‑like superhard cutting material ideal for machining materials such as certain aluminium alloys with abrasive fillers, composites and non‑ferrous abrasive compounds. The result is consistent tool life and fewer index changes, which contributes directly to improved process efficiency and reduced downtime in series production. Geometry tuned for reliable surface finish and stability The Rhombus 55° form combined with a 0.2 mm corner radius supports precise edge engagement and stable chip formation for fine turning operations. The modest corner radius helps to achieve a smoother surface finish while maintaining edge strength for interrupted cuts. A 7° clearance angle reduces flank rubbing and heat buildup, enabling more consistent dimensional results and lower risk of built‑up edge in demanding applications. Designed for process efficiency and repeatability Tolerance class G and the insert’s well‑defined chipbreaker contribute to predictable performance in automated turning cycles. The documented chipbreaker variant supports controlled chip flow in many PKD applications, reducing the likelihood of entanglement and improving cycle reliability. Overall, the combination of a wear‑resistant cutting material and stable geometry translates into fewer tool changes and a higher effective output per cutting edge. Practical application notes and selection guidance PKD inserts are primarily suited to abrasive non‑ferrous and other non‑iron materials; they are not intended for conventional steels or stainless applications unless explicitly rated. The insert’s plate thickness (code 02), size 07 indexing and execution code T should be matched to the correct toolholder and machine rigidity for best results. Check the manufacturer’s product matrix to confirm suitability for specific alloys and operating parameters before series use; technical consultation is recommended where the machining task includes unusual abrasives or combined process constraints. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools DCGT070202FS-1 WDN10 inserts into production, request the material application matrix or discuss sample testing by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: DCGT070202FS-1-WDN10-WALTER Designation: DCGT070202FS-1 WDN10 Manufacturer: Walter Tools Facts Insert shape: Rhombus 55° Clearance angle: 7° Corner radius: 0.2 mm Insert size: 07 Thickness: 2 mm (code 02) Chipbreaker: 1 Tolerance class: G Special features Cutting material: polycrystalline diamond (PKD), grade WDN10 Series: Walter Schneidstoffsorte – Serie offen Execution: T Material specification: catalogue‑dependent Typical application: abrasive non‑ferrous and non‑iron materials Recommendation: verify product matrix for specific alloys FAQ What materials is this PKD insert best suited for? The DCGT070202FS-1 WDN10 insert is designed for abrasive non‑ferrous and other non‑iron materials where polycrystalline diamond offers superior wear resistance compared with conventional carbide. Can the insert be used on steel or stainless steel? PKD grades such as WDN10 are generally not recommended for machining steel or stainless steel; the insert is optimised for non‑iron alloys and abrasive composites and should be checked against the Walter Tools product matrix for any exceptional cases. How does the 0.2 mm corner radius affect the surface finish? A 0.2 mm corner radius provides a good compromise between edge strength and fine surface finish, supporting smoother part surfaces while retaining sufficient durability for interrupted or semi‑continuous cuts. What is the significance of the 7° clearance angle? The 7° clearance angle reduces flank contact and friction, lowering heat generation at the cutting edge and helping to preserve the integrity of the PKD surface during high‑abrasion operations. Is special toolholding required for this insert code? The insert’s size code and thickness (size 07, code 02) must match a compatible toolholder; secure clamping and adequate machine rigidity are recommended to exploit the long life of the PKD cutting edge. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and brand names are the property of their respective owners. Brand names and protected trademarks are used here solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new merchandise from the manufacturer.
DCGT070202M-FP2 WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of Cermet WEP10C edge stability, precise FP2 chip control, and a compact rhombic geometry for consistent finishing results; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DCGT070202M-FP2 WEP10C indexable turning insert — Walter Tools, Cermet grade with FP2 chipbreaker The DCGT070202M-FP2 WEP10C is an indexable turning insert designed for precision finishing and stable chip control in production turning applications. Cermet grade WEP10C for fine finishing Rhombic 55° geometry for versatile facing FP2 chipbreaker for stable chip control 0.2 mm corner radius for consistent micro-edges Consistent surface quality through cermet edge control This insert is built on a Cermet substrate that targets consistent cutting-edge behaviour and fine surface finishes. The WEP10C grade is formulated for finishing tasks where micro-edge integrity matters; the 0.2 mm corner radius produces small, repeatable cutting edges that help achieve low roughness values. Because cermet grades can behave differently across materials and cutting parameters, the sorten- und serienbeschreibung advises checking the product matrix for exact workpiece suitability and cutting data. Explained simply: cermet provides a harder, wear-resistant edge than many carbides, which supports stable finishes in interrupted and continuous cuts without aggressive edge breakdown. Stable process performance and predictable chip control The combination of the FP2 chipbreaker and the rhombic 55° form delivers reliable chip formation and evacuation under a variety of turning conditions. The insert’s 7° clearance angle reduces flank contact while maintaining strength at the cutting edge, aiding in reduced built-up edge and dimensional conformity. A tolerance class G specification ensures consistent geometry between inserts, which supports predictable cycle-to-cycle performance and less rework on the shop floor. In practice, these attributes translate into improved first-pass yields and shorter measurement-and-correction cycles, making toolpaths more economical and stable. Seamless integration and quick indexability for efficient workflows The DCGT geometry and compact size provide straightforward fitting into standard toolholders for finishing operations. With a nominal size designation of 07 and a plate thickness code of 02, the insert offers low-profile engagement and simple indexing when a fresh edge is required. The FP2 chipbreaker is engineered for repeatable chip shapes, which simplifies coolant and downstream handling strategies. For purchasing or process planning, the DCGT070202M-FP2 WEP10C fits where a fine-edge cermet solution is required and can be evaluated against the specific cutting data in the manufacturer’s matrix to confirm optimal cutting speeds and feeds. Contact Metav Werkzeuge for tailored application support and ordering of Walter Tools Cermet inserts; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 for detailed recommendations Technical Data SKU: DCGT070202M-FP2-WEP10C-WALTER Article: DCGT070202M-FP2 WEP10C Brand: Walter Tools Series: Walter Cermet Grade: WEP10C Facts Clearance angle: 7° Corner radius: 0.2 mm Insert size: 07 Thickness code: 02 Tolerance class: G Plate form: Rhombic 55° Special features Chipbreaker: FP2 Geometry designation: DCGT070202M-FP2 Execution code: T Material: Katalogabhängig Sorten- und Serienbeschreibung: WEP10C is a Walter cutting grade; check product matrix for material suitability FAQ What workpiece materials is this cermet grade suitable for? Material suitability should be verified in the product matrix; the WEP10C grade is a cermet formulation aimed at finishing applications and requires matching of cutting data to the specific workpiece. What does the FP2 chipbreaker do? The FP2 chipbreaker controls chip shape and breakage to promote smooth evacuation and consistent surface quality when using the DCGT070202M-FP2 insert. How does the 0.2 mm corner radius affect results? A 0.2 mm corner radius produces a small, durable cutting edge that reduces visible tool marks and supports repeatable finishing without excessive cutting forces. Why is the rhombic 55° geometry chosen for this insert? The rhombic 55° form balances shear angle and insert strength, making it suitable for facing and finishing passes where access and edge performance are required. What does tolerance class G mean for daily use? Tolerance class G indicates consistent manufacturing tolerances between inserts, which helps maintain repeatable cutting depths and interchangeability in serial production with minimal adjustment. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the trademark holders; the offered article is original, factory-new merchandise of the stated manufacturer.
DCGT070202ML-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Take advantage of the combination of durable Cermet cutting material, reliable FX4 chip control and precise Rhombic 55° geometry to maintain steady cycle times and repeatable part quality; order directly via Metav Werkzeuge or consult our technical team for application matching. DCGT070202ML-FX4 WEP01C indexable turning insert — Walter Tools, FX4 chipbreaker, Cermet grade DCGT070202ML-FX4 WEP01C is an indexable turning insert designed for precision turning tasks where stable chips and consistent edge life are required Cermet grade WEP01C for durable cutting edges Rhombic 55° geometry for flexible turning strategies FX4 chipbreaker for controlled chip formation 7° clearance angle for improved tool engagement Higher productivity through stable cutting and chip control The combination of the WEP01C cermet grade and the FX4 chipbreaker focuses on delivering stable chip formation, which directly supports uninterrupted cycles and fewer machine stoppages. Cermet cutting materials typically offer a fine-grained, wear-resistant edge that resists abrasive wear while providing good surface finish; in practice this means longer edge life under comparable cutting conditions. This insert is therefore a practical choice when process consistency and reduced downtime are priorities in a production environment. Precision geometry that improves part quality and repeatability The Rhombic 55° shape combined with a 0.2 mm corner radius and a 7° clearance angle creates a balance between accessibility in complex contours and a defined cutting edge for finishing operations. A smaller corner radius helps to achieve finer surface finishes on workpieces while preserving dimensional control during light to medium cuts. The G tolerance class ensures repeatable seating in standard DCGT-style toolholders, contributing to reliable indexability and consistent concentricity across insert changes. Practical integration and application guidance for the workshop Marked as part of the Walter Cermet series, this insert is intended for integration into common indexable turning tool systems that accept DCGT geometry. The designation indicates catalogue-dependent specification for coating and material compatibility, so material suitability should be verified against the product matrix before selecting cutting parameters. Where uncertainty remains about the match between insert and application, technical consultation is recommended to align feed, speed and holder selection with the intended machining strategy. For technical confirmation or to specify the Walter Tools DCGT070202ML-FX4 WEP01C for a production run, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitability and availability Technical data Article number: DCGT070202ML-FX4-WEP01C-WALTER Label: Drehwendeschneidplatte DCGT070202ML-FX4 WEP01C Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.2 mm Insert size: 07 Thickness designation: 02 Tolerance class: G Special features Chipbreaker: FX4 Geometry: Rhombus 55° Series: Walter Cermet Grade: WEP01C Execution: T Bezeichnung ohne Sorte: DCGT070202ML-FX4 ISO designation: DCGT070202ML-FX4 WEP01C Material specification: Katalogabhängig FAQ What materials is this insert suitable for? Material suitability should be checked in the product matrix; the DCGT070202ML-FX4 WEP01C is a Cermet grade and its compatibility depends on the specific workpiece material and coating selection Can the insert be used for finishing operations? Yes, the Rhombic 55° geometry with a 0.2 mm corner radius makes the insert suitable for light finishing cuts where a good surface quality is required Which chip behaviour can be expected with the FX4 chipbreaker? The FX4 chipbreaker is designed for controlled chip formation and evacuation, supporting stable machining and reduced risk of long, stringy chips How is repeatability ensured when changing inserts? Repeatable seating is supported by the G tolerance class and the ISO DCGT form, which together help to maintain consistent positioning in standard toolholders Is this insert part of a recognised series for easy specification? Yes, it belongs to the Walter Cermet series and is designated as WEP01C; check the catalogue for matching grades and coatings Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGT070202MR-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Take advantage of the FX4 chipbreaker and WEP01C cermet grade for stable cutting performance and consistent edge life; order the insert directly via Metav Werkzeuge or consult our specialists for tailored cutting data. DCGT070202MR-FX4 WEP01C turning insert — Walter Tools, FX4 chipbreaker, WEP01C cermet The DCGT070202MR-FX4 WEP01C is a rhombic 55° turning insert designed for precision finishing and reliable chip control in production turning operations. FX4 chipbreaker for controlled chip evacuation WEP01C cermet grade for repeatable edge life Rhombus 55° geometry for versatile turning angles 0.2 mm corner radius for fine surface finishes Consistent geometry for dependable turning results The combination of Rhombus 55° geometry and tolerance class G ensures a predictable contact angle and repeatable mounting across toolholders. This geometry delivers a balance between strength and accessibility for both external and light face-turning tasks. The 0.2 mm corner radius supports fine surface integrity without compromising tool life, while the 7° clearance reduces rubbing at the flank, lowering heat generation and helping maintain the cutting edge condition. For production environments seeking steady component quality, these geometrical details translate directly into fewer rejects and consistent part tolerances. Controlled chips and higher process productivity The FX4 chipbreaker is engineered to promote short, manageable chips under a range of cutting parameters. Combined with the WEP01C cermet grade from the Walter Cermet series, the insert is aimed at achieving stable chip formation and a smooth cutting action at finishing speeds. This pairing contributes to improved surface finish and less tool interaction time for automated chip conveyors and secondary operations. If the goal is to reduce cycle time while keeping surface quality high, the insert’s chip control capability supports a more efficient machining cycle and predictable tool-change scheduling. Clear specification and application guidance for safe integration Key specifications such as insert size 07, thickness designation 02, and FX4 chipbreaker are clearly documented to assist in tooling selection and inventory management. The material designation for the grade is catalogue-dependent, so material suitability should be confirmed against the product application matrix before use. Where doubt exists regarding feeds, speeds or material compatibility, referencing the manufacturer’s cutting data is recommended to ensure optimum parameters. Proper selection reduces the risk of premature wear and helps achieve the expected edge life performance attributed to this cermet grade. Practical benefits for production-focused workshops Adopting this insert supports predictable maintenance intervals and can simplify tooling logistics thanks to its standardised ISO designation and common rhombic form. The WEP01C grade is positioned for stable wear behaviour and repeatable finishing performance, offering a pragmatic balance between surface quality and tool longevity. For operations that prioritise throughput with consistent component presentation, such a solution helps maintain uptime and reduces variability between batches. Contact Metav Werkzeuge for personalised cutting data, application recommendations and to source Walter Tools DCGT070202MR-FX4 WEP01C turning inserts for improved process reliability Technical data Article number: DCGT070202MR-FX4-WEP01C-WALTER Label: Drehwendeschneidplatte DCGT070202MR-FX4 WEP01C Walter Tools Series: Walter Cermet Grade: WEP01C ISO designation: DCGT070202MR-FX4 WEP01C UID: DCGT070202MR-FX4-WEP01C-WALTER Core specifications Clearance angle: 7° Corner radius: 0.2 mm Insert size: 07 Thickness designation: 02 Chipbreaker: FX4 Geometry: Rhombus 55° Tolerance class: G Execution: T Material designation: Catalogue-dependent Features and suitability FX4 chipbreaker for controlled chip formation Walter Cermet series for cermet cutting performance WEP01C cermet grade Rhombic 55° insert form Check product matrix for material suitability Designed for finishing and precision turning tasks FAQ What is the primary advantage of the FX4 chipbreaker? The FX4 chipbreaker promotes short, controlled chips and consistent evacuation, improving surface finish and reducing the likelihood of chip-related interruptions when using the DCGT070202MR-FX4 WEP01C Walter Tools turning insert. Which materials is this cermet grade suitable for? Material suitability for the WEP01C grade depends on the manufacturer's application matrix; confirm compatibility in the product matrix for the intended workpiece material before machining. How does the 0.2 mm corner radius affect surface quality? A 0.2 mm corner radius helps achieve finer surface finishes while maintaining acceptable edge strength for finishing applications on appropriately selected materials with the Walter Cermet grade. Is the insert suited for heavy roughing operations? The DCGT070202MR-FX4 WEP01C insert, with its rhombic 55° form and cermet grade, is optimised for finishing and stable cutting rather than heavy roughing; select a more robust geometry or grade for heavy stock removal. What should be checked before integrating this insert into a production line? Verify the insert’s grade, chipbreaker and geometry against the tooling holder and workpiece material using the manufacturer’s cutting data to ensure the DCGT070202MR-FX4 WEP01C meets process requirements Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are cited solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, factory-new goods of the manufacturer Walter Tools.
DCGT070204-FM2 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of a high-performance turning insert that combines Tiger·tec Gold coating and an optimised FM2 chipbreaker to improve component quality and machining stability when working with rostfreier Stahl; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DCGT070204-FM2 DCGT070204-FM2 WMP20G — Turning insert for rostfreier Stahl by Walter Tools The DCGT070204-FM2 WMP20G is a rhombic 55° turning insert designed for stable chip control and consistent edge life in medium to robust stainless-steel turning applications. Tiger·tec Gold coating for stable cutting edges Optimised FM2 chipbreaker for stainless steel chips Rhombic 55° insert with 0.4 mm corner radius 7° clearance angle for secure engagement Improved process security and predictable tool life The Tiger·tec Gold grade delivers a balance of wear resistance and thermal stability that reduces unexpected tool wear and supports longer tool life in rostfreier Stahl. Built as a coated carbide grade, the cutting material resists adhesion and edge breakdown under the typical temperatures of stainless-steel turning. The combination of coating technology and substrate hardness results in fewer interruptions for tool changes and steadier production output, which makes the insert well suited for repetitive or batch turning operations where process reliability is critical. Effective chip control and surface consistency The integrated FM2 chipbreaker is engineered to produce short, controllable chips with stainless-steel alloys, lowering the risk of built-up edge and improving surface finish. Because the geometry supports consistent chip formation, the insert helps maintain dimensional stability across a run. Operators benefit from reduced secondary operations and more uniform part quality, while production planners gain better predictability for cycle times and downstream processes. Geometry tuned for secure engagement and multi-purpose turning The rhombic 55° form with a 0.4 mm corner radius and a 7° clearance angle combines entry stability with the ability to perform a range of turning tasks, from finishing to light roughing. The geometry minimises vibration at the cutting edge and provides a reliable cutting line, which is especially useful when machining tough, work-hardened rostfreier Stahl. Fewer vibrations mean improved tool performance and a reduced likelihood of surface irregularities on the finished component. For robust stainless-steel turning tasks, contact Metav Werkzeuge to request Walter Tools Tiger·tec Gold inserts or technical advice — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data SKU: DCGT070204-FM2-WMP20G-WALTER Designation: DCGT070204-FM2 WMP20G Manufacturer: Walter Tools Product type: Turning insert Facts Insert form: Rhombic 55° Insert size: 07 Thickness: 02 Corner radius: 0.4 mm Relief angle: 7° Tolerance class: G Special features Series: Tiger-tec Gold Grade: WMP20G (coated carbide) Chipbreaker: FM2 Suitable for: rostfreier Stahl Application focus: medium to robust stainless-steel conditions FAQ Which materials is this insert suitable for? The DCGT070204-FM2 WMP20G by Walter Tools is specified for rostfreier Stahl and is optimised for the challenges associated with stainless-steel turning. What chip control can be expected from the FM2 geometry? The FM2 chipbreaker in this Walter Tools grade is designed to produce short, controlled chips, improving surface consistency and minimising chip-related interruptions. What are the key geometry values for this insert? The insert has a rhombic 55° form, a 0.4 mm corner radius and a 7° clearance angle, which together ensure secure engagement and versatile turning performance. Is the coating suitable for elevated cutting temperatures? The Tiger·tec Gold coating on the WMP20G grade provides thermal stability and adhesion resistance, supporting consistent cutting behaviour under the higher temperatures typical of rostfreier Stahl machining. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Registered trademarks and product names remain the property of their respective owners. Brand names and registered trademarks are used for explanation only and do not imply any affiliation between our company and the trademark owners. The offered item is original, brand-new stock from the manufacturer.
DCGT070204-FM2 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver grade, precise FM2 chip control and a stable Rhombic 55° geometry for consistent turning results on hard-to-machine alloys; order the DCGT070204-FM2 WSM01 directly via Metav Werkzeuge or ask our consultants if needed. DCGT070204-FM2 WSM01 turning insert, Tiger‑tec Silver – for rostfreier Stahl and superalloys | Walter Tools DCGT070204-FM2 WSM01 is an indexable turning insert designed for heavy-duty machining of difficult-to-machine materials, offering a coated carbide grade for stable edge life and repeatable performance Tiger‑tec Silver grade WSM01 Optimised FM2 chipbreaker Rhombic 55° geometry For rostfreier Stahl and superalloys Consistent cutting performance with a heat-resistant grade The WSM01 grade from the Tiger‑tec Silver series is a coated cemented carbide specifically developed for machining rostfreier Stahl and high-temperature alloys. Its coating and substrate combination is tuned to support secure chip formation and a stable cutting edge under high thermal load. This results in fewer interruptions for tool changes, improved process uptime and reduced rework. The choice of a heat-resistant grade minimises edge wear during prolonged contact with abrasive or adhesive workpiece surfaces, translating into measurable productivity gains in series turning operations. Geometry and chip control that stabilise the cut The Rhombic 55° plate form, combined with the FM2 chipbreaker, delivers reliable chip control and predictable cutting forces. With a relief angle of 7° and a corner radius 0.4 mm, the insert reduces vibration and supports a consistent surface finish while allowing stable engagement in heavy cuts. The FM2 chipformer is optimised to break and evacuate chips across a range of cutting parameters, lowering the risk of built-up edge formation when machining sticky alloys. Tolerance class G ensures interchangeability and fast insert indexing without compromising alignment accuracy. Wide application spectrum and practical benefits in production Intended for ISO groups M and S, this insert covers rostfreier Stahl (stainless steels) as well as heat-resistant superalloys and titanium, offering flexible application across aerospace, energy and medical machining tasks. The coated design aids in temperature management at the cutting zone, supporting extended tool life and consistent dimensional results. For shops seeking to reduce cycle time and scrap rates, the combination of a robust grade and an optimised chipbreaker provides a rational, cost-effective solution: fewer tool changes, steady surface quality and predictable component throughput. Select the Walter Tools Tiger‑tec Silver DCGT070204-FM2 WSM01 for demanding turning tasks and contact Metav Werkzeuge to confirm the ideal geometry and grade for specific rostfreier Stahl or superalloy applications – eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: DCGT070204-FM2-WSM01-WALTER Designation: DCGT070204-FM2 WSM01 Series: Tiger‑tec Silver Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Data Plate form: Rhombus 55° Plate size: 07 Plate thickness: 02 Relief angle: 7° Corner radius: 0.4 mm Chipbreaker: FM2 Tolerance class: G Special features Grade: WSM01 (coated cemented carbide) Optimised for rostfreier Stahl (ISO M) Suitable for superalloys and titanium (ISO S) Designed for heavy-duty and difficult-to-machine materials Stable edge life and reliable chip control FAQ What materials is this insert suitable for? The DCGT070204-FM2 WSM01 is engineered for machining rostfreier Stahl and, depending on geometry, heat-resistant superalloys and titanium as indicated by its ISO M/S suitability. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, reducing built-up edge and improving surface finish during turning of ductile and heat-prone materials. What does the WSM01 grade mean for tool life? WSM01 is a coated carbide grade in the Tiger‑tec Silver family that balances wear resistance and thermal stability, extending tool life in continuous and high-temperature cutting conditions. Is the Rhombic 55° form suitable for heavy cuts? Yes, the Rhombic 55° geometry combined with a 7° relief angle provides robust support for the cutting edge, making the insert well suited to heavier feed and depth of cut applications. Can the insert be indexed without resetting tool offsets? Tolerance class G ensures consistent dimensions when indexing the insert, enabling quick replacement or rotation with minimal adjustment in most turret systems. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are used for explanatory purposes only. The offered article is an original, factory-new product of the stated manufacturer.
DCGT070204-FM2 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Silver coating, stable edge life and reliable chip control for demanding materials; this combination supports consistent productivity and predictable tool life. Order the DCGT070204-FM2 WSM10S directly via Metav Werkzeuge or ask our consultants if needed. DCGT070204-FM2 WSM10S turning insert – rhombic 55° form, Tiger‑tec Silver coating (Walter Tools) A DCGT070204-FM2 WSM10S is a rhombic 55° turning insert engineered for machining stainless steels and heat‑resistant superalloys in demanding turning operations. Tiger‑tec Silver coating, heat resistance Suited to stainless steels and superalloys FM2 chipbreaker for secure chip control Rhombic 55° form, 0.4 mm corner radius Consistent performance when machining demanding alloys The coated carbide grade WSM10S from the Tiger‑tec Silver family is developed for components that challenge the cutting edge. Its microstructure and coating combine to resist thermal assault and reduce edge wear, delivering consistent cutting performance when turning stainless steels and heat‑resistant alloys. The FM2 chipbreaker supports stable chip formation, which reduces the risk of built-up edge and minimises interruptions to the production flow. This section focuses on measurable gains in process reliability rather than abstract claims. Edge stability and geometry for reliable surface quality A rhombic 55° geometry with a 0.4 mm corner radius and 7° relief provides a balance between strength and finishing capability. The moderate corner radius improves tool life under interrupted cuts, while the geometry supports predictable chip flow and good surface finish in most finishing and semi‑finishing operations. For customers requiring repeatable surface integrity, the combination of geometry and the FM2 chipbreaker offers a technical route to reduced rework and more efficient downstream processing. Selection guidance and practical application tips Choose the insert when parts are made from materials classified under ISO group M (rostfreie Stähle) or S (heat‑resistant superalloys and titanium); the grade is optimised to cope with adhesion and heat concentration typical of these groups. When deploying the insert in serial production, monitor cutting speeds and feed rates to match the grade’s thermal capacity: moderate increases in speed can be used where coolant and machine stability allow. For application advice or compatibility checks with existing toolholders and turning strategies, Metav Werkzeuge’s specialists can assist with cutting data and process integration. Contact Metav Werkzeuge today to discuss toolholder compatibility, recommended cutting data and availability of the DCGT070204-FM2 WSM10S insert and related Tiger‑tec Silver variants Technical Data Article number: DCGT070204-FM2-WSM10S-WALTER Designation: DCGT070204-FM2 WSM10S Brand: Walter Tools Product type: Drehwendeschneidplatte Facts Free angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 55° Plate size: 07 Plate thickness code: 02 Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WSM10S Chipbreaker: FM2 Material compatibility: S / M Execution code: T Suitable for: rostfreie Stähle (M), heat‑resistant superalloys and titanium (S) FAQ What materials is this insert designed to machine? The DCGT070204-FM2 WSM10S from Walter Tools is designed for ISO groups M and S — primarily stainless steels and heat‑resistant superalloys (including titanium) where thermal resistance and stable chip control are required. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker on this insert promotes predictable chip formation and evacuation, which reduces the incidence of built‑up edge and helps maintain consistent surface quality during interrupted and continuous turning. What role does the Tiger‑tec Silver coating play? The Tiger‑tec Silver coating increases thermal resistance and improves wear behaviour, extending tool life under higher cutting temperatures typical for machining rostfreie Stähle and superalloys. Is the 0.4 mm corner radius suitable for finishing? A 0.4 mm corner radius offers a balance between strength and finish capability; it is appropriate for many finishing and light semi‑finishing operations while improving edge robustness in tougher cuts. Can this insert be used with common Walter toolholders? The insert matches standard indexable turning holders that accept DCGT‑style rhombic 55° plates; for exact holder compatibility and clamping recommendations, consult Metav Werkzeuge’s technical team. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new merchandise of the manufacturer Walter Tools.
DCGT070204-FM2 WSM20S FM2 Wendeplatten - Walter Tools
Take advantage of a proven combination of durable coated carbide and a controlled FM2 chipbreaker for reliable chip formation when machining stainless steels and heat‑resistant alloys; order genuine Walter Tools inserts or contact Metav Werkzeuge for application advice. DCGT070204-FM2 WSM20S rhombic 55° turning insert, Tiger·tec Silver — Walter Tools A DCGT070204-FM2 WSM20S turning insert designed for productive machining of stainless steels and heat‑resistant superalloys in demanding turning operations Tiger·tec Silver coating for high heat resistance FM2 chipbreaker for stable chip formation Rhombic 55° shape with 0.4 mm corner radius 7° relief angle for controlled cutting action High‑performance grade for challenging materials The insert uses the WSM20S grade within the Tiger·tec Silver series, engineered for materials that are difficult to machine. This coated carbide grade emphasises thermal resistance and edge stability, which reduces the risk of built‑up edge and supports predictable tool life when cutting stainless steels and heat‑resistant alloys. The classification for material groups S and M indicates suitability for superalloys and titanium (S) as well as stainless steels (M), allowing one grade to serve multiple high‑temperature applications while maintaining consistent process results. Geometry and chip control for consistent surface quality A deliberately chosen geometry delivers both strength and finish: the rhombic 55° shape with a 0.4 mm corner radius balances corner robustness and surface integrity, while the FM2 chipbreaker promotes short, controllable chips on interrupted and continuous cuts. The 7° relief angle helps to reduce rubbing and heat transfer into the cutting edge, supporting repeatable dimensional accuracy and less frequent edge deterioration. Tolerance class G and the standardised ISO designation ensure interchangeability and predictable seating in modern toolholders. Production advantages and application guidance Integration of this insert into a production line typically reduces downtime through extended edge life and reliable chip control, leading to fewer edge changes and improved throughput. The insert’s compact format and series design facilitate replacement with common toolholders used in turning cells. For special setups or unfamiliar materials, technical consultancy is available to adapt cutting data and reach the expected performance quickly. The DCGT070204-FM2 WSM20S insert is therefore a practical choice where process security and efficient machining of demanding alloys are priorities. Contact Metav Werkzeuge today for tailored cutting data and to source genuine Walter Tools Tiger·tec Silver turning inserts for specialised stainless steel and superalloy applications Technical Data Article number: DCGT070204-FM2-WSM20S-WALTER Product type: Turning insert ISO designation: DCGT070204-FM2 WSM20S Series: Tiger·tec Silver Grade: WSM20S Manufacturer: Walter Tools Facts Corner radius: 0.4 mm Relief angle: 7° Plate size: 07 Plate thickness: 02 Tolerance class: G Special features FM2 chipbreaker Rhombic 55° plate form Coated carbide grade designed for hard‑to‑machine materials Suitable for stainless steels and heat‑resistant superalloys Execution: T FAQ What materials is this insert best suited for? The DCGT070204-FM2 WSM20S insert is intended for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), offering thermal stability and stable chip control for these demanding materials. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker on this turning insert promotes short, controlled chips and consistent evacuation, which improves process reliability and reduces the risk of surface damage during turning operations. What are the key geometry benefits of the rhombic 55° shape? A rhombic 55° plate gives good versatility for external turning and profiling, allowing favourable approach angles and improved cutting‑edge support, especially when combined with a 0.4 mm corner radius for edge strength. Is this insert compatible with standard toolholders? The ISO designation DCGT070204-FM2 WSM20S follows common sizing standards for turning inserts, enabling compatibility with holders designed for rhombic 55° DCGT inserts and straightforward indexability. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no connection between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT070204-FN2 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of a versatile rhombic 55° geometry, a FN2 chipbreaker and the WN10 uncoated carbide grade to achieve reliable chip control and steady productivity in general turning operations. Order the DCGT070204-FN2 WN10 indexable insert directly via Metav Werkzeuge or ask our consultants for application support. DCGT070204-FN2 WN10 — Indexable turning insert, Rhombic 55°, 0.4 mm radius | Walter Tools The DCGT070204-FN2 WN10 is an indexable turning insert designed for general turning tasks, offering a rhombic 55° geometry and an FN2 chipbreaker to support stable chip formation across a wide range of operations. Rhombic 55° geometry for versatile turning FN2 chipbreaker for controlled chip formation 0.4 mm corner radius for precision finishing Uncoated solid carbide grade WN10 Consistent chip control for predictable machining The rhombic 55° geometry combined with the FN2 chipbreaker delivers predictable chip behaviour, which reduces downtime caused by chip-related interruptions. With this combination, the insert provides an efficient compromise between cutting-edge strength and access to contour detail during turning. The uncoated cemented carbide grade WN10 is specified as an economy class, uncoated grade; therefore, material suitability should be verified against the manufacturer's product matrix to ensure optimal performance. This technical clarity supports process planning and helps maintain a stable production flow. Accurate edge form for repeatable surface quality A 0.4 mm corner radius and a relief angle of 7° contribute to a balance between a forgiving cutting edge and the capacity for fine surface finishing. The geometry reduces the tendency for edge chipping under normal cutting conditions, while the compact insert size and thickness coding support toolholder rigidity. As a result, the insert helps achieve repeatable surface finish and dimensional accuracy with fewer rework cycles, which is particularly beneficial in batch production where consistency is essential. Clear specification and application guidance The insert is supplied in the DCGT070204-FN2 format within the Walter Tools product family and is manufactured from uncoated cemented carbide in the WN10 grade. The open series designation signals an economical choice for many standard turning tasks; however, the Wärter-style product matrix should be consulted for compatibility with specific workpiece materials. If machining parameters require adaptation for higher-temperature alloys or hardened steels, consider consulting technical support to select an alternative grade or coating that matches the application demands. Contact Metav Werkzeuge for technical advice and availability on Walter Tools WN10 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DCGT070204-FN2-WN10-WALTER Designation: DCGT070204-FN2 WN10 Label: Drehwendeschneidplatte DCGT070204-FN2 WN10 Walter Tools Facts Relief angle: 7° Corner radius: 0.4 Insert form: Rhombus 55° Size code: 07 Thickness code: 02 Tolerance class: G Special features Chipbreaker: FN2 Grade/Sort: WN10 (uncoated cemented carbide) Series: Walter Schneidstoffsorte - Serie offen Execution: T Material designation: Katalogabhängig FAQ What machining tasks suit this insert best? The DCGT070204-FN2 WN10 indexable insert is aimed at general turning applications where a rhombic 55° geometry and FN2 chip control provide versatile performance for a range of workpiece profiles. Is the WN10 grade coated or uncoated? The WN10 grade is supplied as an uncoated cemented carbide; this should be considered when selecting cutting parameters or when high-temperature resistance is required. How does the FN2 chipbreaker affect productivity? The FN2 chipbreaker promotes controlled chip formation and evacuation, which can reduce interruptions and enable steadier cycle times during turning operations. Can this insert be used for finishing passes? With a 0.4 mm corner radius and 7° relief angle, the insert is capable of producing good surface finishes in many finishing scenarios, provided the workpiece material is compatible with the WN10 grade. Where to verify material suitability for this grade? Material compatibility and recommended cutting data should be checked against Walter Tools' product matrix or requested via Metav Werkzeuge for precise recommendations. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGT070204-FN2 WNN10 Wendeplatten - Walter Tools
Profit from a combination of reliable wear resistance and predictable chip control through the coated carbide grade WNN10 and the FN2 chipbreaker, together with a versatile rhombic geometry for flexible turning tasks; order directly via Metav Werkzeuge or request personalised machining advice. DCGT070204-FN2 WNN10 – indexable turning insert, Rhombic 55°, FN2 chipbreaker (Walter Tools) A DCGT070204-FN2 WNN10 indexable turning insert engineered for general turning applications where consistent chip formation and repeatable edge life are required. Coated carbide WNN10 for broad material coverage FN2 chipbreaker for controlled chip formation Rhombic 55° shape for versatile turning 0.4 mm corner radius for repeatable edge strength Consistent chip control that raises productivity The combination of the WNN10 coated carbide grade and the FN2 chipbreaker provides chip control tailored to many routine turning operations. This pairing reduces the frequency of interrupted cuts and tool changes by producing predictable chip forms, which in turn supports longer uninterrupted runs and higher machine uptime. The coating and substrate design aim to balance wear resistance and toughness for dependable performance in mixed production environments. Geometry designed for flexibility and reliable edge life The insert’s Rhombic 55° geometry and a 0.4 mm corner radius deliver a balance between accessibility and edge strength, enabling competent external turning and light profiling without compromising insert life. The 7° relief angle supports stable cutting forces and helps to avoid rubbing at the flank, while the compact thickness and size format make the insert suitable for a broad range of standard toolholders, facilitating quick replacement and consistent part-to-part results. Measurable accuracy and production consistency Manufactured to tolerance class G, this insert is aimed at applications where dimensional repeatability and predictable tool behaviour are essential. The designation DCGT070204-FN2 WNN10 signifies a standardised insert geometry with a coated carbide cutting material and the FN2 chipbreaker, allowing shops to align process parameters with data sheets and tooling matrices for consistent outcomes and simplified inventory management. Material guidance and technical alignment for process reliability The grade is a coated carbide; suitability for specific workpiece materials should be confirmed in the manufacturer’s product matrix. For complex alloys or specialised materials, seek technical advice based on cycle times, depth of cut and coolant strategy. Metav Werkzeuge can provide the product matrix and machining recommendations to help integrate the insert into an existing process chain while maintaining productivity and surface finish targets. Practical procurement and application notes The insert is produced within a well-established Walter Tools series and is intended for straightforward replacement in standard turning fixtures. Given the focus on stable chip formation and reliable edge life, the insert suits batch production and mixed-series runs where predictability is valued. For ordering and stock enquiries, Metav Werkzeuge supplies comprehensive information on availability and lot traceability to support planning and procurement. Discuss the Walter Tools DCGT070204-FN2 WNN10 with Metav Werkzeuge to confirm suitability for the intended application and to arrange supply and technical matching through Metav Werkzeuge. Technical data Article number: DCGT070204-FN2-WNN10-WALTER Label: Drehwendeschneidplatte DCGT070204-FN2 WNN10 Walter Tools Product type: Drehwendeschneidplatte ISO designation: DCGT070204-FN2 WNN10 Basic designation: DCGT070204-FN2 UID: DCGT070204-FN2-WNN10-WALTER Core specifications Relief angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 55° Plate size: 07 Plate thickness: 02 Tolerance class: G Materials & features Grade: WNN10 (coated carbide) Chipbreaker: FN2 Series: Walter Schneidstoffsorte - Serie offen Execution: T Material information: Katalogabhängig FAQ What machining tasks is this insert best suited for? The DCGT070204-FN2 WNN10 indexable turning insert by Walter Tools is intended for general turning where controlled chip formation and repeatable edge life are priorities; consult the product matrix for specific material matches. How does the FN2 chipbreaker affect performance? The FN2 chipbreaker promotes predictable chip shapes and evacuation, which in combination with the WNN10 coated carbide helps to reduce interruptions and improve process stability during turning operations. Is there guidance on material compatibility for the WNN10 grade? Yes; suitability depends on the workpiece and cutting parameters, so the product matrix and technical documentation available from Metav Werkzeuge should be used to determine optimal application ranges. Walter Tools (Walter AG) is a recognised brand of precision tools; the Walter AG group is part of the Sandvik Group. Protected trademarks and product names belong to their respective owners. There is no affiliation implied between Metav Werkzeuge and the listed brands. The offered item is an original, factory‑new product of the manufacturer.
DCGT070204-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance from the Tiger‑tec Silver series and the WSM01 grade for secure chip formation in demanding materials; the MM4 chipbreaker and 0.4 mm corner radius deliver consistent edge stability. Order the DCGT070204‑MM4 WSM01 indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. DCGT070204-MM4 WSM01 — Indexable turning insert, Tiger‑tec Silver, Walter Tools DCGT070204-MM4 WSM01 is an indexable turning insert engineered for heavy-duty turning of stainless steels and heat‑resistant superalloys Tiger‑tec Silver series for enhanced wear resistance Suitable for stainless steels and superalloys 55° rhombic geometry for versatile turning 0.4 mm corner radius for consistent edge strength Superior edge stability for difficult-to-machine materials The combination of the Tiger‑tec Silver coating and the WSM01 grade offers elevated wear resistance and thermal resilience when machining challenging materials. Designed with ISO 513 groups M and S in mind, this insert supports secure chip formation and a stable cutting edge even under elevated temperatures. The result is longer tool life and reduced rework cycles, which improves overall process efficiency in serial production and demanding single-part runs. Better chip control and consistent surface finish The MM4 chipbreaker, together with the 55° rhombic geometry and a 0.4 mm corner radius, promotes controlled chip evacuation and reduces the risk of built-up edge on stainless steels. A 7° relief angle keeps cutting forces in check and supports repeatable surface quality for turned components. These geometry features translate into lower downtime for tool changes and a more predictable finishing process across varied workpiece batches. Practical specification and integration into tooling systems The insert is specified as DCGT070204‑MM4 WSM01 and matches common toolholders for the corresponding 07 size and 02 thickness. Tolerance class G ensures consistent seating and repeatability in automatic tool changes, while the Tiger‑tec Silver series enhances process security during continuous operation. When replacing or specifying tooling, select holders compatible with a 55° rhombic insert and consult cutting data tailored to stainless steels and superalloys to exploit the full potential of this grade. For robust machining of stainless steels and heat‑resistant superalloys, request the Walter Tools DCGT070204‑MM4 WSM01 from Metav Werkzeuge for expert advice on process parameters and immediate availability. Technical data Article number: DCGT070204-MM4-WSM01-WALTER ISO designation: DCGT070204-MM4 WSM01 Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Relief angle: 7° Corner radius: 0.4 mm Geometry: 55° rhombic Plate size: 07 Thickness: 02 Tolerance class: G Special features Chipbreaker: MM4 Grade: WSM01 (coated carbide) Material suitability: M (stainless steels), S (heat‑resistant superalloys / titanium) Execution: T Application focus: Heavy‑duty turning of hard‑to‑machine materials FAQ What materials can this insert machine effectively? The DCGT070204‑MM4 WSM01 from Walter Tools is designed for ISO group M (stainless steels) and S (heat‑resistant superalloys and titanium), giving reliable performance where heat resistance and edge stability are critical. Which geometry characteristics influence performance? The 55° rhombic shape, 0.4 mm corner radius and 7° relief angle of the DCGT070204‑MM4 WSM01 contribute to stable cutting forces, predictable surface finish and consistent tool life under interrupted or continuous cutting. How does the MM4 chipbreaker help in practice? The MM4 chipbreaker on this Walter Tools grade is tuned to promote short, controllable chips and reduce built‑up edge, which supports process security and improved surface quality when machining stainless steels and superalloys. Which series and grade does this insert belong to? This insert is part of the Tiger‑tec Silver series and uses the WSM01 coated carbide grade, a combination aimed at high wear resistance and dependable performance in demanding turning applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
DCGT070204-MM4 WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S carbide grade for steady chip control and long edge life, resulting in more reliable turning cycles on demanding alloys; order directly via Metav Werkzeuge or consult our specialists for process parameters. DCGT070204-MM4 WSM20S turning insert — Tiger·tec Silver grade for rostfreier Stahl and superalloys | Walter Tools The DCGT070204-MM4 WSM20S is a rhombic 55° turning insert designed for demanding applications on rostfreier Stahl and heat‑resistant superalloys, offering a balance of edge stability and secure chip formation. Tiger·tec Silver coating, WSM20S grade Optimised for rostfreier Stahl and superalloys Rhombic 55° geometry with 7° clearance MM4 chipbreaker for consistent chip control Increase throughput on difficult-to-machine alloys with proven coating technology The combination of Tiger·tec Silver and the WSM20S grade provides high thermal and abrasive resistance, which directly translates into longer tool life and fewer interruptions. For materials that tend to work‑harden or generate heat, such as rostfreier Stahl and nickel‑based superalloys, the coated carbide supports stable chip formation and reduces the risk of built‑up edge. This increases process reliability and can lower overall machining costs by reducing tool change frequency and scrap rates. The design focus is on delivering measurable productivity gains rather than abstract promises. Consistent surface quality and durable cutting edge through geometry and chip control The insert's MM4 chipbreaker, combined with a 0.4 mm corner radius and rhombic 55° form, yields reproducible chips and a controlled contact zone at the cutting edge. A 7° clearance minimises flank rubbing while maintaining cutting security, which benefits surface finish and dimensional stability on delicate components. The result is a predictable machining outcome: fewer reworks and a smaller spread in surface roughness values. Where finish matters, the geometry supports a fine balance between robustness and detail. Simple integration into established tool rooms and clear specification for process planning Marked as DCGT070204-MM4, the insert follows common industry designation practices and fits into compatible clamping systems for rhombic turning plates. The tolerance class G supports repeatable indexing and positional accuracy during insert changes. Material suitability is stated as S / M, indicating the insert's intended use for Titan/high‑temperature alloys and rostfreier Stahl according to ISO classifications; this helps with quick process selection and tooling standardisation. For shops standardising setups, the plate thickness and format aid straightforward procurement and inventory management while contributing to stable cycle times. For applications requiring reliable performance on rostfreier Stahl and superalloys, contact Metav Werkzeuge for tailored recommendations or to discuss the Walter Tools DCGT070204-MM4 WSM20S insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: DCGT070204-MM4-WSM20S-WALTER Designation: DCGT070204-MM4 WSM20S Product type: Drehwendeschneidplatte Series: Tiger-tec Silver Grade: WSM20S Facts Clearance angle: 7° Corner radius: 0.4 mm Plate size: 07 Plate thickness: 02 Tolerance class: G Special features Chipbreaker: MM4 Plate form: Rhombus 55° Material suitability: S / M Suitable for rostfreier Stahl: yes Execution: T FAQ What materials is this insert best suited for? The DCGT070204-MM4 WSM20S insert is optimised for rostfreier Stahl and heat‑resistant superalloys, offering secure chip formation and thermal resistance for these groups. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker on the DCGT070204-MM4 promotes consistent chip control and reduces the tendency for long, stringy chips, improving process safety and surface finish. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver increases wear and heat resistance on the cutting edge of the DCGT070204-MM4, resulting in longer tool life and fewer change‑overs under demanding cutting conditions. Is the insert suitable for precision turning operations? Yes; the tolerance class G and the rhombic 55° geometry support repeatable indexing and stable cutting, which is beneficial for precision turning tasks. How does the 0.4 mm corner radius influence results? A 0.4 mm corner radius offers a compromise between edge strength and achievable surface finish, giving the DCGT070204-MM4 resilience against chipping while still allowing fine tolerances. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used solely for explanatory purposes. There is no affiliation between our company and the mentioned brands; the item offered is an original, factory‑new product from the manufacturer.
DCGT070204-MN2 WN10 Wendeplatten - Walter Tools
Combining the rhombic 55° geometry with the WN10 uncoated carbide grade and the MN2 chipbreaker delivers stable chip control and reliable finishing; benefit from consistent edge life and straightforward tool integration — order directly via Metav Werkzeuge or consult our specialists for application support. DCGT070204-MN2 WN10 — Indexable turning insert, rhombic 55° (Walter Tools) A DCGT070204-MN2 WN10 indexable insert engineered for general turning and finishing tasks, featuring a 55° rhombic form and an MN2 chipbreaker for predictable chip formation. *Rhombic 55° geometry for versatile turning *WN10 uncoated carbide for cost-effective cutting *MN2 chipbreaker for consistent chip control *0.4 mm corner radius for fine surface finishes *7° relief angle for reduced cutting forces Consistent finishing from precise geometry The rhombic 55° shape provides a favourable cutting edge orientation for both finishing and light roughing, enabling access to shoulders and profiles with minimal interference. The 0.4 mm corner radius supports a fine surface finish while reducing the risk of edge chipping under normal cutting conditions. For production lines where repeatable dimensional results matter, this geometry helps maintain consistent part quality and simplifies setup across multiple machines. Reliable chip control and predictable cutting behaviour Equipped with the MN2 chipbreaker, the insert promotes controlled chip formation across a range of feeds and depths of cut. The insert’s WN10 designation indicates an uncoated carbide grade optimised for general-purpose turning; uncoated grades offer predictable wear patterns and economical tool recycling. The 7° relief angle reduces rubbing at the flank and lowers cutting forces, which in turn supports stable machining and fewer unexpected tool changes — an advantage for efficiency-driven production environments. Easy integration and inventory clarity for production Size and form follow common industry standards so the insert integrates smoothly into existing toolholder systems. The designation DCGT070204-MN2 WN10 denotes the geometry and chipbreaking technology, while the size code 07 and thickness code 02 correspond to standard insert dimensions, aiding quick tool selection. For material compatibility, the product matrix should be consulted to confirm suitability for specific workpiece materials; this approach reduces machining risk and ensures repeatable performance in serial production. Contact Metav Werkzeuge for tailored recommendations on Walter Tools inserts and to confirm stock availability and delivery options Technical data SKU: DCGT070204-MN2-WN10-WALTER Manufacturer: Walter Tools Product type: Indexable turning insert ISO designation: DCGT070204-MN2 WN10 Series: Walter Schneidstoffsorte - Serie offen Grade: WN10 Core specifications Shape: Rhombic 55° Size code: 07 Thickness code: 02 Corner radius: 0.4 mm Relief angle: 7° Chipbreaker: MN2 Tolerance class: G Special features Material: Katalogabhängig Cutting material: Uncoated carbide (WN10) Execution code: T Application note: Check product matrix for material suitability FAQ What materials is the insert suitable for? Material suitability depends on the product matrix; the WN10 grade is an uncoated carbide intended for general turning applications, so confirm specific workpiece materials against the product matrix before selection. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker promotes controlled chip formation and evacuation, improving process stability and reducing the likelihood of entangling chips during turning operations. Can the insert be used for finishing and light roughing? Yes — the rhombic 55° geometry combined with the 0.4 mm corner radius provides versatility for finishing and light roughing, delivering good surface quality while maintaining robustness. Which toolholders accept this insert designation? The DCGT form corresponds to standard toolholder interfaces for rhombic inserts; match the insert’s size and seating to the holder specification for secure clamping and correct cutting geometry. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are cited for explanation only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer (Walter Tools).
DCGT070204-MN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide performance, precise geometry and effective chip control for stable turning cycles; order the insert through Metav Werkzeuge or consult our specialists for application matching. DCGT070204-MN2 WNN10 — Indexable turning insert by Walter Tools, rhombic 55° with MN2 chipbreaker DCGT070204-MN2 WNN10 is an indexable turning insert designed for general turning applications where predictable chip formation and repeatable seating are required Coated carbide grade WNN10 Rhombic 55° insert geometry MN2 chipbreaker for controlled chips 0.4 mm corner radius and 7° relief Stable cutting and predictable process results The coated carbide grade WNN10 provides a balance between wear resistance and toughness, delivering consistent cutting performance across repeated operations. Combined with the MN2 chipbreaker, the insert promotes stable chip formation, reducing interruptions from chip entanglement and easing swarf evacuation. The tolerance class G ensures repeatable seating and interchangeability in suitable toolholders, supporting reliable tool life planning. For production environments where cycle reproducibility is essential, this geometry and cutting concept reduce variability and help maintain throughput. Geometry and what it means for machining choices The rhombic 55° shape with a 0.4 mm corner radius and 7° relief gives a compromise between accessibility and edge strength: the acute angle improves reach into profiles, while the modest radius preserves edge stability for light to medium finishing cuts. The nominal size code and plate thickness facilitate straightforward selection of compatible toolholders; however, the specific suitability for a given material batch should be verified against the manufacturer's application matrix. Where a gentler finish or smaller radii are required, the small corner radius here supports finer surface quality without excessive cutting forces. Practical handling, integration and benefits for workshops The insert’s chip control and coated substrate simplify daily handling and reduce the need for frequent edge changes, contributing to lower process downtime. The MN2 chipbreaker is optimised for predictable swarf shape, which can reduce machine stoppages and improve operator safety. Inspection of seating and clamping condition is recommended at regular intervals to maintain the tolerance class G performance. For customers seeking precise toolholder pairing or a material-specific recommendation, Metav Werkzeuge can supply the application matrix and advise on optimal cutting parameters to integrate the insert seamlessly into an existing production line. Discuss the application requirements for this Walter Tools insert with Metav Werkzeuge and arrange precise toolholder matching — contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored advice Technical data Article number: DCGT070204-MN2-WNN10-WALTER Label: Drehwendeschneidplatte DCGT070204-MN2 WNN10 Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte ISO designation: DCGT070204-MN2 WNN10 Core specifications Relief angle: 7° Corner radius: 0.4 mm Insert geometry: Rhombus 55° Size code: 07 Thickness code: 02 Tolerance class: G Special features Chipbreaker: MN2 Grade/series: Walter Schneidstoffsorte - Serie offen Grade/sort: WNN10 Execution: T Material designation: Katalogabhängig Base designation: DCGT070204-MN2 FAQ What is the intended use of this insert? The DCGT070204-MN2 WNN10 indexable turning insert is intended for turning operations where controlled chip formation and reliable seating are priorities; consult the Walter Tools application matrix for specific material guidance. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker shapes chips to be more manageable and consistent, reducing the risk of chip-related stoppages and contributing to smoother production cycles with the DCGT070204-MN2 WNN10. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius balances edge strength and surface quality, enabling finer finishes than larger radii while still providing adequate robustness for routine finishing passes. Is the insert compatible with standard toolholders? The insert is manufactured to tolerance class G, which supports repeatable seating; check the toolholder specification against the DCGT070204-MN2 geometry to ensure secure fitment. Where to find cutting data for this grade? Cutting data and recommended parameters for the WNN10 grade are provided in the Walter Tools application matrix; Metav Werkzeuge can supply the relevant documentation and parameter advice. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DCGT070204-MN2 WSM01 WSM01 Wendeplatten - Walter Tools
Benefit from a combination of durable coated carbide, secure chip control and consistent geometry for reliable turning of stainless steels and heat‑resistant alloys. Order the DCGT070204‑MN2 WSM01 turning insert via Metav Werkzeuge or consult the Metav team for application advice. DCGT070204‑MN2 WSM01 turning insert — Rhombic 55°, 0.4 mm corner, Tiger‑tec Silver (Walter Tools) The DCGT070204‑MN2 WSM01 is a coated carbide turning insert tailored for machining stainless steels and heat‑resistant superalloys in demanding production environments. Coated carbide Tiger‑tec Silver for long tool life Optimised chipbreaker MN2 for stable chip control Rhombic 55° form with 0.4 mm corner radius 7° relief angle for secure entry and finish Greater productivity on difficult‑to‑cut alloys The Tiger‑tec Silver coating combined with a coated carbide substrate provides wear resistance and temperature tolerance that supports higher cutting rates in tough materials. Designed for the ISO groups M (rostfreie Stähle/stainless steels) and S (superalloys and titanium), the insert promotes consistent chip formation and reduced built‑up edge. The result is fewer tool changes and improved cycle times, delivering a clear efficiency advantage for production runs and mixed‑batch machining. Repeatable surface quality through optimised geometry The Rhombic 55° shape and 0.4 mm corner radius balance edge strength with accessibility for side and profile turning, enabling controlled engagement and steady finishes. A 7° relief angle improves clearance and reduces rubbing, which helps maintain a stable cutting edge across the tolerance class G specification. These geometric choices translate into predictable workpiece surfaces and simplified process planning, even for operators with limited experience in exotic alloys. Stable chip control and reliable cutting performance The MN2 chipbreaker is engineered to break and evacuate chips reliably under varying feeds and depths of cut, lowering the risk of entanglement and machine downtime. As part of the Tiger‑tec Silver series, the insert supports a wide range of cutting parameters while maintaining edge integrity—particularly beneficial when machining heat‑sensitive materials where thermal load is critical. The insert’s design favours secure clamping and straightforward indexing, contributing to overall process reliability. Discuss application details with Metav Werkzeuge and request the DCGT070204‑MN2 WSM01 turning insert from Walter Tools — email info@metav-werkzeuge.com or call +49 2822 7131930 to confirm fitment and delivery options Technical data Article number: DCGT070204‑MN2‑WSM01‑WALTER Designation: DCGT070204‑MN2 WSM01 Product type: Turning insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Numbers / Core technical data Relief angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 55° Plate size: 07 Plate thickness code: 02 Tolerance class: G Designs / Special features Grade / grade name: WSM01 Chipbreaker: MN2 Coating / substrate: Coated carbide (Tiger‑tec Silver) Application groups: M (stainless steels), S (superalloys, titanium) Intended use: Machining difficult‑to‑cut materials, parts requiring stable chip control and edge life FAQ What materials is this insert suitable for? The DCGT070204‑MN2 WSM01 is designed for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), reflecting its Tiger‑tec Silver coated carbide construction. How does the MN2 chipbreaker affect performance? The MN2 chipbreaker on this Walter Tools insert improves chip segmentation and evacuation, reducing the likelihood of chip jamming and supporting steady cutting conditions in varied feed ranges. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius offers a compromise between edge robustness and achievable surface quality, providing improved finish over blunt radii while maintaining edge strength for interrupted or tougher cuts. Is the insert compatible with standard toolholders for DCGT geometry? The DCGT070204‑MN2 WSM01 follows the common DCGT designation and is compatible with holders designed for DCGT‑style rhombic 55° inserts; verify clamping type and seat dimensions against the holder specification. What tolerance and consistency can be expected from this insert? Manufactured to tolerance class G, the insert provides consistent geometry and repeatable positioning, contributing to process stability in series production. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods from the manufacturer (Walter Tools).
DCGT070204-MP4 WPP20G MP4 Wendeplatten - Walter Tools
Benefit from reliable chip control and extended tool life through the combination of the Tiger·tec Gold coating and the WPP20G grade; the MP4 chipbreaker delivers consistent machining of steel and stable process windows. Order the DCGT070204-MP4 WPP20G insert directly via Metav Werkzeuge or consult the advisors for cutting data and optimised setups. DCGT070204-MP4 WPP20G turning insert for steel, Tiger·tec Gold – Walter Tools DCGT070204-MP4 WPP20G is a 55° rhombic indexable turning insert with a 0.4 mm corner radius and Tiger·tec Gold technology, engineered for efficient and repeatable steel turning operations. Tiger·tec Gold coating for extended tool life WPP20G grade optimised for steel machining MP4 chipbreaker for stable chip control 55° rhombus form with 0.4 mm corner radius Maximise productivity with controlled chip formation and wear resistance The primary advantage of the WPP20G grade lies in its balance between wear resistance and toughness, achieved through the Tiger·tec Gold coating on a coated cemented carbide substrate. The MP4 chipbreaker is designed to shape chips reliably during typical steel turning, reducing the risk of built-up edge and ensuring steady cutting forces. For production environments this means fewer unplanned tool changes and improved cycle-time stability, which in turn supports predictable manufacturing throughput and lower per-part tooling costs. Precision geometry that improves surface finish and repeatability A 55° rhombus profile combined with a 0.4 mm corner radius and a 7° clearance angle gives this insert defined contact conditions that favour stable cutting and consistent surface quality on turned components. The geometry supports small- to medium-depth cuts where control of the cutting edge engagement is critical; the result is repeatable diameters and reduced rework. Clear geometry data allows straightforward calculation of feed and depth settings, simplifying integration into existing turning cycles and CAM strategies. Broad applicability for steel machining and process flexibility Classified for ISO group P, the insert is intended for unalloyed and alloyed steel grades encountered in general engineering and production workshops. The combination of the grade and chip control makes this insert suitable across a spectrum of turning tasks, from roughing passes that require robustness to finishing operations that demand surface integrity. The flexibility inherent in the grade supports consolidated tool inventories and simplifies tool selection for mixed-series production. Built for production: consistent performance and reduced downtime The coated construction and stable chip control contribute to longer edge life and repeatable tool performance, which benefits throughput, scheduling and quality assurance. The insert’s standardised designation aids quick identification for reordering and process documentation, while the robust grade minimises variation between inserts in a batch. In short, the geometry and material pairing provide a reliable basis for continuous operation and consistent part quality in steel turning applications. Contact Metav Werkzeuge for tailored cutting data, application advice and to order the DCGT070204-MP4 WPP20G insert directly from Metav Werkzeuge; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data SKU: DCGT070204-MP4-WPP20G-WALTER Designation: DCGT070204-MP4 WPP20G Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: MP4 Tolerance class: G Clearance angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 55° Plate size: 07 Thickness: 02 Execution: T Manufacturer: Walter Tools Core technical data Clearance angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 55° Plate size: 07 Thickness: 02 Tolerance class: G Special features and application Coating technology: Tiger·tec Gold Grade properties: balanced wear resistance and toughness Suitable material group: ISO P (steel) Chip control: MP4 chipbreaker Typical applications: general turning, finishing and mixed-series production FAQ What materials is this insert suitable for? The DCGT070204-MP4 WPP20G insert is designed for the ISO P material group and is therefore suitable for the machining of steel, including unalloyed and alloyed steels. What advantage does the Tiger·tec Gold technology provide? Tiger·tec Gold coating on the DCGT070204-MP4 WPP20G improves wear resistance and thermal stability, supporting longer edge life and more consistent performance in steel turning operations. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker produces controlled chip shapes during turning, reducing the likelihood of chip-related interruptions and promoting stable cutting forces for improved productivity. Which geometric data define the cutting behaviour? Key geometry features are the 55° rhombus form, a 0.4 mm corner radius and a 7° clearance angle; these parameters govern contact conditions, surface finish potential and edge engagement. Is this insert suitable for finishing operations? Yes. The combination of the WPP20G grade and the defined geometry supports finishing passes where surface quality and dimensional repeatability are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
DCGT070204FS-1 WDN10 Wendeplatten - Walter Tools
Take advantage of a PKD cutting grade that delivers exceptional wear resistance and consistent edge life, combined with a compact Rhombus 55° geometry and a fine 0.4 mm nose radius for superior surface finishes in abrasive non‑ferrous work. Order the DCGT070204FS-1 WDN10 directly via Metav Werkzeuge or contact our consultants for application advice. DCGT070204FS-1 WDN10 indexable turning insert – PKD grade, Rhombus 55° (Walter Tools) The DCGT070204FS-1 WDN10 is a PKD indexable turning insert engineered for machining abrasive non‑ferrous materials where wear resistance and surface quality are critical. PKD grade for abrasive non‑ferrous materials Rhombic 55° geometry for versatile turning 7° clearance angle for reliable chip flow 0.4 mm nose radius for fine surface finish Exceptional wear resistance for abrasive, non‑ferrous machining The combination of polykristalliner Diamant (PKD) in the WDN10 grade and the Rhombus 55° geometry gives this insert outstanding abrasion resistance, which extends cutting edge life when working with abrasive, non‑ferrous materials such as composites and certain non‑ferrous alloys. PKD refers to a diamond coating bonded to the substrate, yielding a hard, wear‑resistant cutting surface; this translates into fewer index changes and more consistent throughput. The technical advantage is clear: longer tool life and reduced process interruptions in high‑volume and precision turning tasks. Stable cutting performance and surface quality Designed with a 7° clearance angle and a 0.4 mm nose radius, the insert delivers a reliable compromise between form strength and fine finishing capability. The clearance angle reduces rubbing and heat generation at the flank, improving dimensional stability across runs, while the small nose radius helps achieve tight surface roughness specifications without sacrificing edge robustness. In practice, this results in consistent surface finish and predictable part conformity—key benefits for production environments demanding repeatable quality. Practical application guidance and mounting considerations The insert is supplied in the standard DCGT format (07 size, 02 thickness), compatible with common clamping systems for Rhombus 55° indexable cutters. The integrated chipbreaker 1 is tailored to chip control in turning of non‑ferrous and abrasive materials; however, suitability should always be verified against the specific material and machining strategy using the manufacturer’s product matrix. For operators seeking process optimisation, the tolerance class G indicates standardised dimensional accuracy that supports interchangeability and straightforward tool management in mixed‑tool inventories. For targeted advice on using the Walter Tools PKD insert in specific applications or to reserve stock of the DCGT070204FS-1 WDN10 through Metav Werkzeuge, please contact Metav Werkzeuge by e‑mail or phone. Technical data Article number: DCGT070204FS-1-WDN10-WALTER Designation: DCGT070204FS-1 WDN10 Product type: Indexable turning insert Brand: Walter Tools Facts Plate size: 07 Thickness code: 02 Clearance angle: 7° Nose radius: 0.4 mm Form: Rhombus 55° Tolerance class: G Special features Grade: WDN10 (PKD) Chipbreaker: 1 Series: Walter Schneidstoffsorte - Serie offen Execution: T Material specification: Catalogue dependent Recommended for abrasive non‑ferrous materials; verify suitability against product matrix FAQ What materials is this insert best suited for? The DCGT070204FS-1 WDN10 uses a PKD grade specifically intended for abrasive, non‑ferrous materials; confirm the match with the product matrix for best results. Can the insert be used for finishing and light roughing? Yes, the combination of a 0.4 mm nose radius and Rhombus 55° geometry suits both finishing and controlled light roughing in appropriate materials. Is the insert compatible with standard DCGT toolholders? The insert follows the DCGT format and is compatible with standard holders designed for Rhombus 55° inserts; check holder specifications for thickness and clamping type. Does the PKD grade allow regrinding or resharpening? PKD inserts such as the WDN10 are generally not suitable for conventional resharpening; replacement is recommended once the cutting edge reaches wear limits. How does the chipbreaker influence machining stability? The chipbreaker 1 is designed to improve chip control in non‑ferrous and abrasive turning operations, supporting stable chip evacuation and consistent surface quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
DCGT070204FS-M1 WDN10 Wendeplatten - Walter Tools
High wear resistance from the PCD grade and a rhombic geometry with a 0.4 mm corner radius deliver consistent edge stability and fine surface finish for abrasive non‑ferrous work. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. DCGT070204FS-M1 WDN10 indexable turning insert by Walter Tools — PCD grade, rhombic 55° geometry DCGT070204FS-M1 WDN10 is an indexable turning insert designed for high‑wear, abrasive non‑ferrous materials, combining a polycrystalline diamond grade with a chipbreaker for controlled machining PCD grade for abrasive non‑ferrous materials Rhombic 55° geometry for versatile tool paths 7° relief angle for reduced cutting forces 0.4 mm corner radius for fine surface finish Durable cutting performance for abrasive, non‑ferrous materials The insert is manufactured in a PCD (polycrystalline diamond) grade, selected for high wear resistance when machining abrasive, non‑iron materials. Polycrystalline diamond provides an extremely hard cutting edge that maintains form over extended runs, reducing downtime for tool changes and improving process stability. For workshop planning this means longer tool life and fewer tool offsets, which supports predictable production scheduling. Users should verify the exact workpiece compatibility against the product matrix, since the grade is optimised specifically for non‑ferrous, abrasive substrates rather than conventional steel machining. Geometry engineered to reduce forces and improve finish The rhombic 55° shape and a 7° relief angle combine to lower cutting forces and enable accessible approach angles in turning operations. The integrated chipbreaker M1 guides swarf away from the cut, helping to avoid recutting and ensuring consistent chip formation, which is particularly important with abrasive materials that can accelerate edge wear. A 0.4 mm corner radius balances edge strength with the ability to achieve a fine surface finish, making the insert suitable for finishing passes where dimensional stability and surface quality are required. These geometric choices translate into smoother machining and more reliable outcomes in series production. Process reliability and selection guidance for production use Built within the Walter Tools portfolio, the insert benefits from a material and geometry combination developed for productive machining of challenging non‑ferrous parts. The open series designation highlights flexibility across multiple applications, but practical selection should consider the specific workpiece and process parameters. For best results, match the insert’s PCD properties and chipbreaker characteristics to cutting speeds, feeds and machine rigidity. For further guidance on feed and speed windows or to confirm suitability for a particular alloy, Metav Werkzeuge’s technical advisors can provide targeted recommendations and application data. For tailored selection and ordering of Walter Tools PCD inserts, contact Metav Werkzeuge for personalised technical advice and procurement assistance. Technical data Article number: DCGT070204FS-M1-WDN10-WALTER Designation: DCGT070204FS-M1 WDN10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Numbers / Core technical data Relief angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 55° Plate size: 07 Plate thickness: 02 Designs / Special features Grade: WDN10 (PCD) Chipbreaker: M1 Execution: T Material: catalogue dependent Tolerance class: G Application note: suitability for abrasive non‑ferrous materials; verify use in product matrix FAQ What materials is this insert suited for? The DCGT070204FS-M1 WDN10 insert is specified for abrasive, non‑ferrous materials; the WDN10 PCD grade is optimised for such applications and suitability should be checked against the product matrix. What does PCD mean and why is it used here? PCD stands for polycrystalline diamond; the DCGT070204FS-M1 WDN10 uses PCD to provide very high wear resistance and long tool life when machining abrasive, non‑iron workpieces. How does the chipbreaker M1 affect machining? The chipbreaker M1 on the insert controls chip formation and evacuation, improving swarf management and promoting consistent cutting behaviour during turning operations. Which geometry features influence surface finish? The rhombic 55° form, a 7° relief angle and a 0.4 mm corner radius together reduce cutting forces and support a fine surface finish in finishing passes. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names and registered trademarks is for explanation only; there is no affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered item is original, factory‑new goods of the respective manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DCGT070204M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the WEP10C cermet grade and the FP2 chipbreaker for reliable finishing performance and consistent surface quality; order directly through Metav Werkzeuge or consult our technical team for application-specific selection and setup. DCGT070204M-FP2 WEP10C — Indexable turning insert by Walter Tools, FP2 chipbreaker, Rhombic 55° The DCGT070204M-FP2 WEP10C is a Walter Cermet indexable insert designed for precision turning and finishing operations where stable cutting and fine surface quality are priorities. Walter Cermet cermet grade WEP10C Rhombic 55° form, 0.4 mm corner radius FP2 chipbreaker for improved chip control 7° clearance angle for reduced rubbing Consistent finishing from a dedicated cermet grade The Walter Cermet WEP10C represents a cermet-based solution engineered to deliver a refined surface finish in finish- to light-roughing operations. Cermet materials combine ceramic hardness with metal toughness, which reduces built-up edge and supports stable cutting at moderate feeds and speeds. This grade is particularly useful when surface integrity and dimensional consistency are required, while the inherent wear resistance of the material extends tool life compared with some conventional grades. Check the product matrix for material compatibility before application. Geometry and chip control that stabilise the cut The rhombic 55° DCGT form and integrated FP2 chipbreaker provide a balance of engagement angle and chip control that reduces vibration and promotes smooth evacuation of chips. The modest 0.4 mm corner radius helps maintain edge robustness without compromising the fine finishing potential, and the 7° clearance angle lowers flank contact to prevent rubbing. Together, these geometric features reduce rework and improve repeatability in serial production. Designed for predictable clamping and straightforward handling The insert’s format—size code 07 and thickness designation 02—follows standard indexing conventions for turning tooling, making it compatible with established DCGT toolholders. The tolerance class G ensures uniformity across batches, supporting reliable seating and repeatable positioning in tool bodies. Clear identification by the WEP10C grade and FP2 chipbreaker simplifies tool management and reduces setup time on the shop floor. Process advantages and productivity considerations Using a specialised cermet insert such as this can lower overall machining cost by extending intervals between indexings and replacements, while maintaining quality in finishing cuts. Optimised chip formation from the FP2 geometry enhances machine uptime by reducing manual chip clearing and minimising the risk of surface defects. For best results, pair the insert with holders designed for DCGT-style rhombic inserts and adjust cutting parameters according to the workpiece material per the available product matrix. For tailored advice on using Walter Cermet inserts or to discuss the best WEP10C setup for a specific application, contact Metav Werkzeuge for expert guidance and reliable supply. Technical data Article number: DCGT070204M-FP2-WEP10C-WALTER Series: Walter Cermet Grade: WEP10C Chipbreaker: FP2 Designation: DCGT070204M-FP2 WEP10C Facts Form: Rhombic 55° Clearance angle: 7° Corner radius: 0.4 mm Size code: 07 Thickness designation: 02 Tolerance class: G Special features Material: Katalogabhängig Execution: T Series description: Cermet cutting material Application note: Verify workpiece suitability in product matrix FAQ What kind of operations is this insert best suited to? This insert, the DCGT070204M-FP2 WEP10C, is optimised for finishing and light- to medium-turning where a high-quality surface finish and consistent edge performance are important. Can the WEP10C grade be used on hardened materials? The WEP10C cermet grade offers good wear resistance, but the DCGT070204M-FP2 WEP10C should only be applied to materials as recommended in the product matrix; consult Metav Werkzeuge for guidance on harder alloys. How does the FP2 chipbreaker affect machining? The FP2 chipbreaker promotes consistent chip formation and evacuation, which improves chip control and helps maintain surface quality during turning operations with this insert. Is the insert compatible with common DCGT toolholders? The insert follows standard DCGT geometry and size code conventions, so the DCGT070204M-FP2 WEP10C is intended to fit typical DCGT toolholders; verify holder compatibility during setup. What does tolerance class G mean for production? Tolerance class G indicates controlled dimensional tolerances for seating and repeatability, supporting predictable positioning and consistent tool behaviour across production batches. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools (Walter AG) is one of the world’s leading manufacturers of precision metalworking tools and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. The named brands are mentioned solely for explanatory purposes; there is no affiliation implied between our company and the trademark owners. The offered item is original and brand-new.
DCGT070204ML-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Take advantage of WEP01C cermet performance combined with the FX4 chipbreaker and precise geometry for stable, repeatable finishing results; order the insert directly via Metav Werkzeuge or consult the team for application guidance. DCGT070204ML-FX4 WEP01C turning insert — Walter Cermet, FX4 chipbreaker, 7° clearance The DCGT070204ML-FX4 WEP01C is a cermet indexable turning insert designed for fine finishing and controlled chip formation in precision turning applications. WEP01C cermet grade for fine finishing FX4 chipbreaker for stable chip control 0.4 mm nose radius for precise contours Rhombic 55° form for versatile turning Faster, more consistent surface finishes with cermet technology The combination of a cermet grade and a well‑defined nose geometry delivers measurable improvements in surface quality and tool life. Cermet substrates are engineered for hardness and wear resistance at finishing speeds, which reduces flank wear and helps maintain a consistent cutting edge over longer runs. The WEP01C specification focuses on reproducible surface finishes, making the insert particularly suitable where repeatability and reduced rework rates matter. Expect improved process stability when the insert is applied within the parameters of the product matrix. Predictable chip control and cutting stability The FX4 chipbreaker is tuned to produce short, manageable chips under typical finishing feeds, supporting uninterrupted production and safer chip handling. Combined with the rhombic 55° geometry and a 7° clearance angle, the insert offers balanced cutting forces that help reduce vibration and ensure dimensional fidelity. The 0.4 mm corner radius supports precise contouring and reliable edge engagement, especially on fine turning passes. These geometric choices translate into a lower risk of unexpected tool wear and more predictable cycle times. Practical advantages for the workshop and production line In daily use the insert’s attributes contribute to leaner production: consistent part quality, fewer tool changes and easier process qualification. The series designation Walter Cermet signals an emphasis on finishing performance, while the chipbreaker and form reduce downstream handling issues. For material compatibility and cutting parameters, the product matrix should be consulted to match the insert to the specific workpiece material and machining strategy. When applied correctly, the insert supports efficient throughput and high surface integrity without compromising process control. Contact Metav Werkzeuge for application advice and availability of the Walter Tools DCGT070204ML-FX4 WEP01C turning insert Technical Data SKU: DCGT070204ML-FX4-WEP01C-WALTER Product: DCGT070204ML-FX4 WEP01C Type: turning insert Manufacturer: Walter Tools Core specifications Clearance angle: 7° Corner radius: 0.4 mm Insert size: 07 Plate thickness: 02 Plate form: Rhombic 55° Tolerance class: G Features and compatibility Series: Walter Cermet Grade: WEP01C (cermet) Chipbreaker: FX4 Execution: T Material information: catalogue dependent FAQ Which materials is this cermet insert suitable for? Material suitability for the DCGT070204ML-FX4 WEP01C must be checked in the manufacturer’s product matrix; the grade is optimised for finishing applications What benefits does the FX4 chipbreaker provide? The FX4 chipbreaker on the DCGT070204ML-FX4 WEP01C produces short, controlled chips to improve chip evacuation and reduce the risk of entanglement How does the 0.4 mm corner radius affect part quality? A 0.4 mm radius gives fine contour definition and helps distribute cutting forces, supporting consistent surface finish and dimensional accuracy Is the rhombic 55° form suitable for shoulder turning? The rhombic 55° geometry enables versatile approach angles and is commonly used where both external turning and profiling are required Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only; there is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new goods of the manufacturer, Walter Tools. The Walter AG (brand appearance: Walter Tools) is a global leader in precision cutting tools and forms part of the Sandvik Group.
DCGT070204MR-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Combining the WEP01C cermet grade with the FX4 chipbreaker yields a compact insert that balances surface finish and tool life for productive turning operations; order directly via Metav Werkzeuge or consult our specialists for support. DCGT070204MR-FX4 WEP01C Turning insert – Rhombus 55°, 0.4 mm corner radius | Walter Tools DCGT070204MR-FX4 WEP01C is a cermet turning insert engineered for precise metalcutting tasks where controlled chip formation and consistent edge performance are required; suitability for specific materials should be confirmed in the product matrix. Cermet grade WEP01C for fine surface quality FX4 chipbreaker for controlled chip formation Rhombus 55° geometry for versatile turning 0.4 mm corner radius with 7° clearance Compact geometry for versatile turning and improved surface finish The Rhombus 55° format combines approach versatility with predictable cutting forces, making the insert suitable for a range of turning operations. The 0.4 mm corner radius increases edge strength while maintaining the ability to produce refined surfaces; a larger radius provides greater robustness, whereas a smaller radius favours finer finishes. The specified 7° clearance reduces flank rubbing and helps to maintain dimensional accuracy across longer cuts. These geometry choices translate into reliable machining results and reduced rework, which supports continuous production with fewer interruptions. Controlled chip formation and sustained edge life for productivity The FX4 chipbreaker is designed to manage chips consistently in interrupted and continuous cuts, helping to avoid entanglement and ensuring safe evacuation. Paired with the WEP01C cermet grade, the combination focuses on surface integrity and stable cutting behaviour rather than aggressive metal removal; cermet is typically selected where improved finish and thermal resistance are priorities. This configuration can extend effective tool life under recommended cutting parameters, lowering machining costs per component and supporting predictable cycle times—key factors for efficient process planning. Practical selection guidance and application notes Material specifications for this insert are catalogue-dependent, so the exact substrate and coating variants should be verified before final selection. The tolerance class G indicates manufacturing precision that supports repeatable clamping and consistent part accuracy when used with suitable toolholders. When choosing an indexable insert for a job, check the product matrix for compatibility with the workpiece material and the intended cutting strategy; the insert’s combination of cermet and FX4 is particularly advantageous where surface quality and chip control are required in finishing and light semi-finishing operations. For complex or high-demand applications, running a short process trial under controlled conditions is recommended to validate parameters. For precision finishing with Walter Tools' cermet grade, contact Metav Werkzeuge for tailored advice and ordering support. Technical data Article number / SKU: DCGT070204MR-FX4-WEP01C-WALTER Product label: Drehwendeschneidplatte DCGT070204MR-FX4 WEP01C Walter Tools Product type: Turning insert Series: Walter Cermet Grade: WEP01C Manufacturer: Walter Tools Internal note: Catalogue-dependent material variants Facts Clearance angle: 7° Corner radius: 0.4 mm Insert form: Rhombus 55° Insert size: 07 Plate thickness: 02 Tolerance class: G Special features FX4 chipbreaker Cermet cutting grade WEP01C Rhombus 55° plate form Material: catalogue-dependent ISO designation: DCGT070204MR-FX4 WEP01C FAQ What materials is this insert suitable for? The DCGT070204MR-FX4 WEP01C insert uses a cermet grade that is suited to applications requiring good surface finish; exact material compatibility should be checked in the product matrix and catalogue variants. How does the FX4 chipbreaker influence machining? The FX4 chipbreaker promotes controlled chip formation and reliable evacuation, helping to reduce entanglement and improve process stability when using the DCGT070204MR-FX4 WEP01C insert. What benefit does the Rhombus 55° form provide? Rhombus 55° geometry offers versatile approach angles for a range of turning tasks, balancing cutting forces for consistent results and enabling use in diverse facing and turning setups. Is the corner radius suitable for finishing operations? The 0.4 mm corner radius on this insert supports improved edge strength while still allowing fine surface finishes, making it a practical choice for finishing and light semi-finishing. How precise is the manufacturing of this insert? The insert is produced to tolerance class G, which ensures repeatable fitment and consistent cutting geometry when mounted in compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DCGT070208FS-1 WDN10 WDN10 Wendeplatten - Walter Tools
Benefit from the exceptional wear resistance of the PKD grade and the stable 0.8 mm cutting edge for consistent surface quality and longer tool life; combine this with the Rhombus 55° geometry for flexible turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for tailored process advice. DCGT070208FS-1 WDN10 – Turning indexable insert, PKD, Rhombus 55° (Walter Tools) DCGT070208FS-1 WDN10 is a PKD turning insert engineered for precision machining of abrasive, non‑ferrous workpieces in high‑productivity turning applications. PKD grade WDN10 for abrasive non‑ferrous materials Rhombus 55° geometry for versatile turning 0.8 mm corner radius for robust edge life 7° clearance reduces rubbing and heat High‑durability grade for abrasive non‑ferrous machining The insert combines the PKD (polycrystalline diamond) cutting material with Walter Tools' open series chemistry to deliver outstanding wear resistance when machining abrasive, non‑ferrous materials such as cast carbides, aluminium alloys with fillers, and other abrasive non‑ferrous grades. The choice of a PKD grade like WDN10 reduces flank wear and extends tool life, which directly improves uptime and lowers cost per component. Material suitability should be verified against the manufacturer’s product matrix to ensure optimum results for each application. Geometry engineered for reproducible surface quality and stability The Rhombus 55° shape and a 7° relief angle give a balanced cutting geometry that supports both light finishing cuts and heavier engagement where the tool life of PKD is advantageous. A 0.8 mm corner radius provides a sturdy cutting edge that resists chipping while contributing to a consistent surface finish on the workpiece. These geometric choices reduce the risk of built‑up edge and minimise vibration, helping to keep cycle times predictable and finishes reproducible in series production. Process reliability, chip control and interchangeability Tolerance class G and the specified chipbreaker (chipbreaker 1) support stable seating and repeatable performance in modern toolholders. The insert’s series designation signals an open chemistry series from Walter Tools that is optimised for broad application ranges; nevertheless, the cutting data and workpiece material should be matched via the product matrix for best results. The clear labelling and standard form factor simplify inventory management and replacement, contributing to efficient process control on the shop floor. For application advice, cutting‑data recommendations or to order the Walter Tools PKD insert via Metav Werkzeuge GmbH contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the optimal grade and geometry for the task at hand Technical Data SKU: DCGT070208FS-1-WDN10-WALTER Type: Turning indexable insert Designation: DCGT070208FS-1 ISO designation: DCGT070208FS-1 WDN10 Brand: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 07 Thickness code: 02 Chipbreaker: 1 Tolerance class: G Special features Coating / grade: PKD (polycrystalline diamond) – WDN10 Shape: Rhombus 55° Material specification: Katalogabhängig Main application: abrasive, non‑ferrous materials Series note: Verify suitability via product matrix FAQ What materials is this insert best suited for? The DCGT070208FS-1 WDN10 insert uses a PKD grade optimised for abrasive, non‑ferrous materials; suitability should be confirmed against the Walter Tools product matrix for each workpiece alloy. How does the 0.8 mm corner radius affect cutting performance? A 0.8 mm corner radius increases edge strength and resistance to chipping, improving stability and prolonging tool life during semi‑finishing and finishing operations. Can this insert be used for heavy roughing? The PKD material and geometry favour high wear resistance; however, roughing strategies depend on cutting parameters and machine capability—verify recommended feeds and speeds for the intended application. What does chipbreaker 1 indicate for chip control? Chipbreaker 1 provides a defined chip formation pattern tailored to the insert geometry, aiding controlled evacuation in turning of non‑ferrous and abrasive materials. Is the insert compatible with standard DCGT toolholders? The insert follows the DCGT form factor and tolerance class G, intended for use in compatible clamping systems; ensure correct seat and clamp type before production use. How to confirm the correct grade for a specific alloy? Consult the Walter Tools cutting data and product matrix; if in doubt, Metav Werkzeuge can assist with grade selection and cutting‑data optimisation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, factory‑new merchandise from the manufacturer.
DCGT11T3005M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
Precision finishing and predictable chip behaviour combine with robust cermet performance for efficient turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application alignment. DCGT11T3005M-FP2 WEP10C – Indexable turning insert, Rhombic 55°, cermet grade by Walter Tools The DCGT11T3005M-FP2 WEP10C is a cermet indexable turning insert designed for precise finishing and consistent chip control in turning applications. Cermet grade WEP10C for fine finishing Rhombic 55° shape for versatile turning FP2 chipbreaker for stable chip control 7° clearance angle and T3 thickness High-precision finishing with durable cermet performance The Walter Cermet series insert delivers a WEP10C cermet chemistry engineered for high surface quality and extended tool life in finishing passes. The combination of a hard cermet substrate and an optimised FP2 chipbreaker reduces built-up edge and supports steady metal removal, translating into fewer rework cycles and more predictable component quality. This results in measurable productivity gains when fine tolerances and repeatable surface finishes are required on turned parts. Geometry tailored for versatile turning tasks The Rhombic 55° profile with a 7° clearance angle provides a balanced cutting geometry that suits a wide range of turning operations, from light finishing to semi-finishing when stability is needed. The neutral corner radius supports accurate contouring and profile adherence while the T3 thickness ensures secure seating in standard toolholders. Together, these characteristics support consistent cutting forces and reliable insert seating, contributing to process stability and reduced downtime for indexable insert changes. Practical application guidance and process benefits This insert is part of the Walter Cermet line and is specified with tolerance class G; material suitability should be verified according to the manufacturer’s product matrix. The FP2 chip control is intended to produce short, controllable chips for safe swarf management in automated and manual setups. Since the grade and cutting data depend on workpiece material and machining parameters, the result is an adaptable solution that can improve surface finish and tool life in precision turning environments. Contact Metav Werkzeuge for tailored application advice on Walter Tools cermet inserts and receive cutting-parameter recommendations and availability information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: DCGT11T3005M-FP2-WEP10C-WALTER Part designation: DCGT11T3005M-FP2 Product type: Indexable turning insert Grade: WEP10C Series: Walter Cermet Core specifications Insert size: 11 mm Thickness: T3 Clearance angle: 7° Shape: Rhombic 55° Corner radius: 0 Tolerance class: G Design and features Chipbreaker: FP2 Material: Catalogue-dependent Execution: T Intended use: Turning, finishing-oriented FAQ What materials is this insert suitable for? Material suitability must be checked against the Walter Cermet product matrix; the WEP10C grade is optimised for fine finishing across a broad range of materials, depending on the specific workpiece and process. How does the FP2 chipbreaker affect machining? The FP2 chipbreaker promotes stable chip formation and safer removal during finishing cuts, helping to maintain surface quality and reduce the risk of chip entanglement in automatic operations. Can the insert be used for roughing operations? The cermet WEP10C and the Rhombic 55° geometry are primarily aimed at finishing; while occasional light semi-finishing is possible, heavier roughing demands different grades and geometries. Is special tooling required for secure clamping? Standard indexable turning toolholders compatible with the DCGT insert geometry and T3 thickness are suitable; correct clamping and seat cleanliness remain essential for repeatable performance. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new merchandise from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com