DCGT11T304-FM2 WMP20G WMP20G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with an FM2 chipbreaker and a 0.4 mm corner radius delivers reliable chip control and consistent edge stability for stainless‑steel turning; order the insert via Metav Werkzeuge or consult their application specialists for process recommendations. DCGT11T304-FM2 WMP20G turning insert — Walter Tools, Tiger·tec Gold coating, for stainless steel The DCGT11T304-FM2 WMP20G is a rhombic 55° turning insert designed for moderate to robust machining of stainless‑steel components, offering optimised chip formation and repeatable edge performance in demanding production environments. Tiger·tec Gold coating for high process security Optimised for stainless steel (M class) FM2 chipbreaker for secure chip control 0.4 mm corner radius for consistent edge strength Higher productivity through controlled chip formation The Tiger·tec Gold grade WMP20G combines a coated‑carbide substrate with a tailored surface layer that stabilises the cutting edge when machining stainless steel. With the FM2 chipbreaker, chips are guided reliably, which reduces the risk of entanglement and minimises interruptions. This technical pairing is intended to increase effective cutting time and support shorter cycle times: consistent chip flow is achieved even under increased cutting temperatures, so tool changes and unplanned stops are reduced and process stability is improved. Predictable surface finish and edge lifetime Rhombic 55° geometry together with a 0.4 mm corner radius and 7° clearance produces a robust cutting edge that resists built‑up edge and provides uniform contact with the workpiece. The insert geometry is selected to balance edge strength and surface quality: fine finishes are attainable without sacrificing tool life in medium to heavy stainless‑steel operations. Tolerance class G ensures interchangeability and repeatable positioning in precision turning setups, making part quality more predictable across batches. Practical integration for shopfloor use Designation DCGT11T304‑FM2 WMP20G indicates a compact insert (size 11, thickness T3) that fits standard holders for rhombic 55° inserts; the coated carbide grade is intended for ISO group M applications. In practice, the insert is best applied where stable cutting conditions and effective chip control are required—components prone to workhardening or thermal sensitivity will benefit from the grade’s balanced wear resistance. Documentation and setup notes are recommended to align speeds and feeds with toolholder rigidity and machine capability to exploit the Grade’s advantages fully. For process advice or to request application data and availability for Walter Tools inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and order support. Technical data SKU: DCGT11T304-FM2-WMP20G-WALTER Article designation: DCGT11T304-FM2 WMP20G Manufacturer: Walter Tools Facts Corner radius: 0.4 mm Clearance angle: 7° Plate size: 11 Plate thickness: T3 Tolerance class: G Special features Grade: WMP20G (coated carbide, Tiger·tec Gold) Chipbreaker: FM2 Geometry: Rhombus 55° Series: Tiger·tec Gold Intended material group: stainless steel (ISO M) FAQ What materials is this insert suitable for? The DCGT11T304‑FM2 WMP20G insert is specified for stainless steel (ISO group M) and is formulated to handle the typical heat and adhesiveness of those alloys. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker on the WMP20G grade promotes controlled chip formation and evacuation, which improves process stability and reduces the likelihood of chip rework or machine interruptions. What does the designation DCGT11T304‑FM2 mean for tool selection? The code describes a rhombic 55° turning insert (size 11, thickness T3) with a 0.4 mm corner radius and FM2 chipbreaker; this helps in selecting compatible toolholders and setting up cutting parameters. Is this insert suited to heavy interrupted cuts on stainless steel? The combination of Tiger·tec Gold coating and a 0.4 mm radius provides enhanced edge strength suited to moderate to robust conditions; however, machine rigidity and cutting data should be matched to the specific application. Can the insert be used on other materials besides stainless steel? The WMP20G grade is optimised for ISO group M; while occasional use on other related alloys may be possible, the insert’s performance and wear characteristics are defined for stainless‑steel machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are cited for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product from the manufacturer.
DCGT11T304-FM2 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of the WSM01 coated‑carbide grade, the FM2 chipbreaker and the rhombic cutting geometry for reliable, high‑temperature machining of stainless and heat‑resistant materials; order the insert directly via Metav Werkzeuge or request specialist advice from our consultants. DCGT11T304-FM2 WSM01 turning insert — Tiger‑tec Silver, FM2 chipbreaker (Walter Tools) The DCGT11T304-FM2 WSM01 is a rhombic 55° indexable insert for turning, designed for machining rostfreier Stahl and heat‑resistant superalloys in demanding production environments Tiger‑tec Silver series for consistent edge life Optimised FM2 chip control for secure swarf evacuation Rhombic 55° form with 0.4 mm corner radius Reliable performance for stainless and superalloy turning The WSM01 grade within the Tiger‑tec Silver series delivers a balance of thermal resilience and edge integrity tailored to difficult‑to‑machine materials such as rostfreier Stahl and heat‑resistant superalloys. The coated‑carbide composition promotes stable cutting and reduces the risk of built‑up edge under elevated temperatures. For workshop planners this means fewer tool changes and more predictable cycle times, supporting improved overall equipment effectiveness. Geometry engineered for chip control and surface quality The rhombic 55° insert shape combined with the FM2 chipbreaker provides controlled swarf formation and efficient evacuation during interrupted or continuous cuts. The 0.4 mm corner radius offers a compromise between strength and finish: small enough for fine surface quality, yet robust enough to withstand edge loading. The 7° relief angle helps reduce rubbing on the flank face, limiting heat transfer to the cutting edge and aiding repeatable part tolerances. Proven tool life and consistent productivity This insert’s design focuses on long tool life and repeatable performance in serial production. The WSM01 grade resists thermal softening and maintains a reliable cutting edge, which contributes to reduced downtime and lower tooling consumption per component. Walter Tools’ engineering emphasis on edge stability and process security supports steady machining results across shifts and operators. Application notes and holder compatibility As a turning insert, DCGT11T304‑FM2 WSM01 is suitable for a range of finishing and light roughing operations in materials classified under M and S according to ISO 513: M denotes rostfreier Stahl and S denotes heat‑resistant superalloys and titanium. Selection of appropriate insert holder, cutting speeds and feed rates will depend on the workpiece alloy and part geometry; the FM2 chipbreaker is particularly effective where controlled chip segmentation improves evacuation and surface integrity. For tailored recommendations, consult Metav Werkzeuge’s technical advisors. Contact Metav Werkzeuge for expert application advice and reliable supply of Walter Tools Tiger‑tec Silver inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: DCGT11T304-FM2-WSM01-WALTER Name: Drehwendeschneidplatte DCGT11T304-FM2 WSM01 Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Chipbreaker: FM2 Shape: Rhombus 55° Relief angle: 7° Corner radius: 0.4 mm Thickness: T3 Tolerance class: G Core specifications Plate size: 11 mm Corner radius: 0.4 mm Relief angle: 7° Thickness designation: T3 Tolerance class: G Materials & special features Coated carbide grade (WSM01) Suitable for rostfreier Stahl (M) and heat‑resistant superalloys/titanium (S) FM2 chip control geometry for secure swarf formation Rhombic 55° insert form for versatile turning applications Series Tiger‑tec Silver for improved thermal resistance FAQ Which materials is this insert suited to machine? The DCGT11T304‑FM2 WSM01 insert is specified for rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), reflecting the composition and thermal stability of the WSM01 grade. What advantage does the FM2 chipbreaker provide? The FM2 geometry on this Walter Tools insert promotes short, controllable chips and reliable evacuation, reducing the likelihood of tangling and improving surface consistency during both continuous and interrupted cuts. Is the 0.4 mm corner radius suitable for finishing? A 0.4 mm corner radius balances edge strength with surface finish capability; it is appropriate for many finishing and light roughing operations where a stable edge is required without compromising finish quality. Can this insert be used for roughing heavy cross sections? The DCGT11T304‑FM2 WSM01 is optimised for machining difficult materials with emphasis on edge life and chip control; for heavy roughing a larger radius or a specifically designed roughing geometry may be preferable depending on the application. Which insert holders are compatible with the rhombic 55° form? Standard turning toolholders for rhombic 55° indexable inserts are suitable; ensure the holder matches the DCGT insert clamping and that orientation supports the required cutting data for rostfreier Stahl or superalloys. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named manufacturers; the offered article is an original, factory‑new product of the stated manufacturer.
DCGT11T304-FM2 WSM10S Tiger-tec Silver Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM10S grade for dependable edge stability and wear resistance, while the FM2 chipbreaker secures consistent chip formation in demanding materials; this creates reliable, productive turning operations for stainless and heat‑resistant alloys. Order the DCGT11T304-FM2 WSM10S directly via Metav Werkzeuge or ask our consultants if needed. DCGT11T304-FM2 WSM10S – Indexable turning insert, Tiger·tec Silver (stainless steel & titanium) by Walter Tools The DCGT11T304-FM2 WSM10S is a rhombic 55° indexable turning insert from Walter Tools, optimised for machining stainless steels and heat‑resistant superalloys including titanium. Tiger·tec Silver coated grade WSM10S Rhombic 55° form with 0.4 mm corner radius FM2 chipbreaker for secure chip control 7° clearance and T3 plate thickness High‑performance grade engineered for challenging materials The WSM10S grade, part of the Tiger·tec Silver family, is a coated carbide solution targeted at tough‑to‑machine materials. Its coating and substrate combination are designed to support secure chip formation and a stable cutting edge when turning austenitic and other stainless steels as well as heat‑resistant alloys. This results in extended tool life and fewer unplanned interruptions, which benefits batch production and longer cycle operations. Geometry that balances access and surface quality The rhombic 55° plate form with a 0.4 mm corner radius provides a versatile geometry for a wide range of turning tasks, offering good approach angles and reliable strength at the cutting edge. Combined with the FM2 chipbreaker, the geometry helps produce short, controllable chips and consistent surface finishes on demanding workpiece materials. These characteristics reduce machining risk and support predictable process outcomes. Robust design for repeatable productivity With a 7° clearance angle and T3 plate thickness, the insert delivers mechanical stability under moderate to heavy cutting conditions while maintaining accessibility for various toolholders. The tolerance class G ensures dimensional consistency for accurate indexing and repeatable set‑ups. Together, these attributes support higher uptime and simplified tooling management in production environments that require dependable, repeatable performance. Practical selection and application guidance The insert is suitable for ISO groups S and M—heat‑resistant superalloys and stainless steels—so selection should align with the workpiece material and machining strategy. The FM2 chipbreaker is intended for stable chip control in these groups; where different chip forms are required, choose an alternative breaker geometry. For any uncertainty about matching insert geometry to a specific turning task, technical consultation is recommended to ensure optimal cutting conditions and tool life. For tailored cutting solutions based on Walter Tools' Tiger·tec Silver WSM10S grade, contact Metav Werkzeuge for expert advice and quick availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DCGT11T304-FM2-WSM10S-WALTER Designation: DCGT11T304-FM2 WSM10S Manufacturer: Walter Tools Facts Free angle: 7° Corner radius: 0.4 mm Plate size: 11 Plate thickness: T3 Tolerance class: G Special features Series: Tiger·tec Silver Grade: WSM10S (coated carbide) Chipbreaker: FM2 Plate form: Rhombus 55° Material suitability: S / M FAQ Which materials is this insert intended for? The DCGT11T304-FM2 WSM10S is specified for ISO material groups S and M, meaning it is suitable for heat‑resistant superalloys and stainless steels, including many titanium applications. How does the FM2 chipbreaker influence machining? The FM2 chipbreaker on the DCGT11T304-FM2 WSM10S promotes secure, short chip formation and stable evacuation, supporting consistent surface quality when working with tough alloys. What advantages does the rhombic 55° form offer? A 55° rhombic form provides good cutting edge strength and access in shoulder and facing operations, while enabling versatile tool approach angles for a range of turning tasks. Why is the 0.4 mm corner radius important? The 0.4 mm corner radius balances edge strength and surface finish; it helps absorb intermittent loads while still delivering acceptable finish on components machined from ductile or work‑hardening alloys. Is this insert coated and what benefit does that provide? Yes — the insert is part of the Tiger·tec Silver family, a coated carbide solution that improves wear resistance and thermal stability for prolonged cutting performance. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods from the manufacturer.
DCGT11T304-FM2 WSM20S Wendeplatten - Walter Tools
Taking advantage of proven Tiger·tec Silver wear resistance and the FM2 chipbreaker, this insert delivers stable chip control and extended edge life when machining stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult their specialists for application-specific advice. DCGT11T304-FM2 WSM20S turning insert, Tiger·tec Silver – for stainless steels & superalloys (Walter Tools) The DCGT11T304-FM2 WSM20S is a precision turning insert engineered for demanding machining of stainless steels and heat‑resistant superalloys, combining a robust chipbreaker and a low free cutting angle for secure edge performance. Tiger·tec Silver coating for long tool life Optimised FM2 chipbreaker for stable chip control 0.4 mm corner radius for consistent surface finish Rhombic 55° form for versatile turning applications High‑performance grade engineered for difficult materials The WSM20S grade, built on Tiger·tec Silver technology, is a coated carbide combination developed specifically for materials that challenge tool life and thermal stability. Its formulation favours reliable edge stability and wear resistance when machining stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S). This results in fewer unplanned tool changes and a more predictable production rhythm, supporting higher productivity in mixed‑material batches and long cutting cycles. Geometry and chip control that improve process stability The rhombic 55° form and the FM2 chipbreaker deliver controlled chip formation across a range of turning tasks, from finishing to medium roughing. A corner radius of 0.4 mm helps maintain surface quality while avoiding excessive cutting forces at the edge, and the modest 7° free cutting angle allows secure engagement in tougher alloys. Together, these design elements reduce the risk of built‑up edge and enable steady feeds and depths of cut, so operators achieve consistent part geometry with fewer rejects. Practical application advice and production benefits As an indexable insert with T3 plate thickness and tolerance class G, the component is straightforward to integrate into standard toolholders for turning operations. The combination of coating and grade reduces wear mechanisms typical for high‑alloy and stainless workpieces, translating into longer tool life and improved cost‑effectiveness per part. For process optimisation, pairing this insert with stable clamping, appropriate coolant strategy, and conservative initial cutting parameters helps unlock its full potential while safeguarding reproducible results for batch production. Contact Metav Werkzeuge for tailored advice on selecting Walter Tools inserts for specific stainless or high‑temperature alloy applications – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DCGT11T304-FM2-WSM20S-WALTER Designation: DCGT11T304-FM2 WSM20S Series: Tiger·tec Silver Manufacturer: Walter Tools Facts Geometry: Rhombus 55° Size: 11 Thickness: T3 Corner radius: 0.4 mm Free cutting angle: 7° Tolerance class: G Chipbreaker: FM2 Grade: WSM20S Special features Coating: Tiger·tec Silver Substrate: coated carbide Material application: stainless steels (M), heat‑resistant superalloys and titanium (S) Typical use: turning / indexable insert FAQ Which materials is this insert suitable for? The DCGT11T304-FM2 WSM20S insert from Walter Tools is specified for stainless steels (M) and heat‑resistant superalloys/titanium (S) in accordance with ISO material grouping, providing enhanced performance where heat and toughness are critical. What advantage does the Tiger·tec Silver coating provide? Tiger·tec Silver on the WSM20S grade increases thermal resistance and wear protection, extending cutting edge life and improving process stability when machining difficult-to-cut alloys. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker delivers predictable chip geometry and evacuation, reducing the likelihood of built‑up edge and supporting steady surface quality during turning operations with challenging materials. Is the geometry suitable for finishing operations? Yes; the Rhombic 55° form combined with a 0.4 mm corner radius enables consistent surface finish and dimensional control, making the insert appropriate for many finishing and light to medium turning tasks. What should be considered when integrating this insert into a production line? Given the DCGT11T304-FM2 WSM20S’s focus on thermal and edge stability, pairing it with appropriate toolholder rigidity, coolant strategy and conservative initial cutting parameters will help achieve repeatable performance and prolonged tool life. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGT11T304-FN2 WN10 Wendeplatten - Walter Tools
Combining the robust WN10 uncoated cemented carbide with the FN2 chipbreaker and the Rhombus 55° geometry results in stable chip formation and productive turning performance; order the DCGT11T304-FN2 WN10 through Metav Werkzeuge or consult our advisers for specifications and suitable cutting data. DCGT11T304-FN2 WN10 rhombic 55° turning insert by Walter Tools – FN2 chipbreaker, corner radius 0.4 mm The DCGT11T304-FN2 WN10 is an indexable turning insert designed for versatile turning tasks where predictable chip control and a reliable cutting edge are required Uncoated cemented carbide WN10 Rhombus 55° geometry for versatile turning FN2 chipbreaker for controlled chip flow Corner radius 0.4 mm and 7° relief Predictable chip control for continuous production The uncoated WN10 grade is a cemented carbide formulation optimised for stable chip formation and consistent tool life in general turning operations. The integrated FN2 chipbreaker is engineered to produce short, manageable chips under typical turning conditions, which reduces the risk of entanglement and machine downtime. For users without in-depth coating chemistry knowledge, an uncoated carbide simply means reliable edge strength without an additional coating layer; this can be preferable where adhesion of workpiece material or certain cutting conditions would diminish coated performance. Check the manufacturer’s product matrix for specific material suitability before defining feeds and speeds. Geometry that balances strength and surface quality The Rhombus 55° plate form enables a range of approach angles suitable for axial and light radial engagement, while the corner radius 0.4 mm provides a compromise between edge robustness and surface finish. The 7° relief (clearance) angle minimises rubbing on the flank face and helps to maintain surface integrity during longer tool paths. Together, these features allow a reduced number of tool changes and offer predictable results in mixed production environments. Where surface finish matters, selecting the appropriate depth of cut in combination with the small corner radius will deliver improved part quality. Process reliability, selection and handling advice Tolerance class G and the identification as part of the Walter Schneidstoffsorte - Serie offen indicate consistent manufacturing standards and a straightforward grade designation. Plate thickness T3 and the 11 mm nominal size suit common toolholders designed for this insert form; verify compatibility with holder specifications. The material designation is catalogue-dependent, so final material compatibility and cutting data should be confirmed from Walter Tools documentation or via Metav Werkzeuge if specific alloys or hardening levels are involved. Selecting the right insert grade and chipbreaker reduces cycle times and enhances process security, supporting higher productivity and repeatability on the shop floor. For application-specific advice on Walter Tools inserts such as the DCGT11T304-FN2 WN10, contact Metav Werkzeuge for tailored recommendations and fast supply coordination. Technical data Article number: DCGT11T304-FN2-WN10-WALTER SKU: DCGT11T304-FN2-WN10-WALTER Label: Drehwendeschneidplatte DCGT11T304-FN2 WN10 Walter Tools Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WN10 Material: catalogue-dependent Core data Size: 11 mm Corner radius: 0.4 mm Relief angle: 7° Thickness: T3 Tolerance class: G Special features Rhombus 55° plate form Chipbreaker: FN2 Uncoated cemented carbide (WN10) Designed for versatile turning operations FAQ Which materials is this insert suitable for? The DCGT11T304-FN2 WN10 is an uncoated cemented carbide insert from Walter Tools; material suitability depends on the specific workpiece alloy and should be checked against Walter Tools’ product matrix before machining. Is the DCGT11T304-FN2 WN10 coated? No, the DCGT11T304-FN2 WN10 is delivered as an uncoated cemented carbide grade (WN10) to provide a robust cutting edge without an additional coating layer. What are the geometric specifications that affect performance? The insert features a Rhombus 55° form, a corner radius of 0.4 mm and a relief angle of 7°, which together influence edge strength, surface finish and clearance behaviour during turning with Walter Tools inserts. Which chip behaviour can be expected with the FN2 chipbreaker? The FN2 chipbreaker on this DCGT11T304-FN2 WN10 insert promotes short, controlled chips under typical turning parameters, supporting safer handling and reduced interruption from chip management. How to verify toolholder compatibility for this insert? Compatibility should be confirmed against the toolholder’s accepted insert designation for DCGT 11 type inserts; consult holder specifications and Walter Tools guidance for exact fitment and clamping requirements. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanatory purposes and indicate compatibility or origin; there is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
DCGT11T304-FN2 WNN10 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of precise geometry and a versatile coated carbide grade to improve cycle stability and surface finish; order the insert directly via Metav Werkzeuge or contact the consultants for material-specific recommendations. DCGT11T304-FN2 WNN10 indexable turning insert by Walter Tools — Rhombic 55°, 0.4 mm corner radius DCGT11T304-FN2 WNN10 is a coated-carbide indexable turning insert designed for general turning applications where consistent chip control and predictable surface quality are required Rhombic 55° insert geometry 7° clearance angle for smooth cuts 0.4 mm corner radius for finishing Coated carbide grade WNN10 for versatility Predictable cutting behaviour from a defined geometry The combination of a Rhombic 55° form and a 7° clearance creates a stable cutting geometry that supports consistent tool engagement and repeatable results. The small 0.4 mm corner radius reduces cutting forces in finish passes while maintaining edge strength for light to moderate interruption. Thanks to the FN2 chipbreaker, chip formation is guided for reliable evacuation in many turning tasks, which contributes to reduced cycle variability and more predictable component quality. These design choices translate into measurable process stability rather than vague performance claims. Versatile grade engineered for broad machining tasks The insert uses the WNN10 coated-carbide grade, a balanced specification aimed at combining wear resistance and edge toughness. This grade is intended for productive machining across a range of workpiece materials; the exact material suitability should be verified against the product matrix for specific alloys and hardness levels. The coating improves surface durability and helps maintain tool life during continuous operation, supporting a favourable cost-in-use profile in production-oriented environments. The result is a pragmatic balance between cutting-edge retention and reliable wear behaviour. Robust fit and practical handling in production settings With a size class of 11 and a plate thickness specified as T3, this indexable insert is manufactured to a tolerance class G, enabling consistent seating in standard DCGT pockets and predictable index changes. The open-series specification and clear designation facilitate stock management and assembly into tool holders for semi-finishing and finishing operations. By standardising on inserts with defined geometry and chip control, set-up time is reduced and process reproducibility improved, supporting leaner workflows and less frequent rework. Contact Metav Werkzeuge for tailored cutting recommendations or to request material-specific compatibility guidance for this Walter Tools DCGT11T304-FN2 WNN10 indexable turning insert — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: DCGT11T304-FN2-WNN10-WALTER Designation: DCGT11T304-FN2 WNN10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Core specifications Insert size: 11 Plate thickness: T3 Clearance angle: 7° Corner radius: 0.4 mm Tolerance class: G Materials & special features Grade / coating: Coated carbide (WNN10) Chipbreaker: FN2 Plate form: Rhombus 55° Execution: T FAQ What machining tasks is this insert intended for? The DCGT11T304-FN2 WNN10 is intended for turning operations where a balance of surface finish and process stability is required; the FN2 chipbreaker supports controlled chip formation during finishing and light semi-finishing passes. Is the WNN10 grade suitable for hardened steels? The WNN10 coated-carbide grade offers a versatile performance profile, but suitability for hardened steels must be checked against the product matrix and application parameters before selection. How does the 0.4 mm corner radius affect the finish? A 0.4 mm corner radius improves edge robustness while enabling fine surface qualities in finish cuts; for very fine finishes, suitable feed and speed adjustments are recommended when using this insert. Can this insert be used in standard DCGT tool holders? The design of the DCGT11T304-FN2 WNN10 aligns with standard DCGT seating dimensions and the tolerance class G supports consistent clamping; however, verification in the specific holder is advised. What advantage does the FN2 chipbreaker provide? The FN2 chipbreaker guides chip flow and helps maintain stable cutting conditions, which reduces the risk of irregular chip evacuation and supports consistent finish quality with the WNN10 grade. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
DCGT11T304-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver grade and the MM4 chipbreaker for consistent chip control and extended edge life in demanding turning applications; order directly via Metav Werkzeuge or consult our specialists for process-matched recommendations. DCGT11T304-MM4 WSM01 turning insert — Rhombus 55°, 0.4 mm corner radius (Walter Tools) A DCGT11T304-MM4 WSM01 turning insert designed for demanding machining of stainless steel and heat‑resistant superalloys, optimised for stable cutting and repeatable surface quality Tiger‑tec Silver series for enhanced tool life Suitable for stainless steel and superalloys Rhombic 55° geometry for versatile turning 0.4 mm corner radius for stable edge formation Consistent productivity through optimised grade and geometry The combination of the WSM01 grade within the Tiger‑tec Silver series and the MM4 chipbreaker delivers a reliable balance between wear resistance and edge stability. The insert’s Rhombus 55° form and 7° relief angle enable versatile application across longitudinal and profiling cuts while the 0.4 mm corner radius supports robust edge life. For operations where tool change intervals and process stability determine productivity, this geometry-grade pairing reduces interruptions and helps maintain cycle-time targets. The coated cemented carbide construction ensures thermal resistance and prolongs service life under elevated cutting temperatures. Precise machining of stainless steels and superalloys with stable chip control Designed for the ISO groups M and S, the grade is tailored to the challenges of stainless steel (M) and heat‑resistant superalloys/titanium (S). These materials typically generate high temperatures and tend to work‑harden or produce long, stringy chips; the MM4 chipbreaker promotes controlled chip formation and evacuation, reducing rework and tool interference. Where reliable surface finish and dimensional repeatability matter, the carbide grade’s coating supports a steady cutting edge and mitigates edge build‑up, helping to achieve consistent component quality with fewer rejects. Seamless integration into industrial turning workflows The insert’s standard 11 mm size and T3 thickness make it compatible with common indexable toolholders for medium to heavy turning operations. The DCGT11T304-MM4 WSM01 insert is suitable for shops aiming to improve process security without changing clamping systems: the established insert form and tolerance class G support predictable seating and repeatability. For production environments, the predictable wear behaviour of the grade simplifies tool inventory planning and reduces downtime. For additional guidance on toolholder pairing or recommended cutting data for specific alloys, Metav Werkzeuge’s application consultants can provide tailored data and parameter recommendations. Contact Metav Werkzeuge for proven machining strategies and to discuss suitable insert quantities or application-specific recommendations for Walter Tools turning inserts Technical Data Article number: DCGT11T304-MM4-WSM01-WALTER Product type: Turning insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Chipbreaker: MM4 Geometry: Rhombus 55° Designation: DCGT11T304-MM4 WSM01 Core data Corner radius: 0.4 mm Relief angle: 7° Plate size: 11 mm Plate thickness: T3 Tolerance class: G Materials & features Coating / substrate: coated cemented carbide Suitable for: stainless steel (ISO M) Suitable for: heat‑resistant superalloys and titanium (ISO S) Intended use: difficult‑to‑machine materials; depending on geometry, stainless steel Stable chip formation and improved edge life FAQ What materials is this insert suitable for? The DCGT11T304-MM4 WSM01 turning insert is specified for stainless steel (ISO M) and heat‑resistant superalloys/titanium (ISO S), offering stable cutting behaviour on these groups. Which chipbreaker and geometry does the insert feature? This insert uses the MM4 chipbreaker and a Rhombus 55° geometry, designed for controlled chips and versatile turning tasks. How does the WSM01 grade help with tough materials? The WSM01 grade in the Tiger‑tec Silver series combines a coated cemented carbide substrate with thermal stability to maintain a robust cutting edge when machining work‑hardening or heat‑generating materials. Is this insert compatible with standard toolholders? The 11 mm size and T3 thickness conform to common indexable toolholder interfaces; confirm seat and clamping compatibility with the toolholder manufacturer or Metav Werkzeuge consultants. How does the corner radius affect performance? A 0.4 mm corner radius enhances edge strength and supports consistent surface finish under interrupted or heavy cuts, improving reproducibility in production. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new merchandise of the manufacturer.
DCGT11T304-MM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, stable chip control and precise geometry to ensure consistent, productive turning of demanding materials; order directly via Metav Werkzeuge or request application advice from our specialists. DCGT11T304-MM4 WSM10S turning insert — Tiger·tec Silver coating, for rostfreier Stahl and superalloys — Walter Tools DCGT11T304-MM4 WSM10S is an indexable turning insert designed for heavy-duty and heat-challenging applications, offering robust cutting-edge performance and stable chip formation in rostfreier Stahl and high-temperature alloys Tiger·tec Silver coating for heat resistance Suitable for rostfreier Stahl and superalloys Rhombic 55° form for versatile turning 0.4 mm corner radius for stable cutting Robust coating and substrate for demanding alloys The coated carbide grade WSM10S, part of the Tiger·tec Silver series, provides a balanced combination of thermal resistance and wear control that is essential when machining rostfreier Stahl and heat-resistant superalloys. The composition and multilayer coating reduce adhesion and flank wear, supporting a stable chip formation and extended cutting edge life. For production environments where consistent tool life under elevated temperatures matters, the coated substrate offers measurable gains in process reliability and reduced tool change frequency. Geometry tuned for accurate, repeatable turning A rhombic 55° plate form combined with a 0.4 mm corner radius and MM4 chipbreaker delivers predictable cutting behaviour and surface finish. The insert’s geometry supports both moderate roughing and finishing passes: the 55° orientation balances approach angle and radial engagement, while the small radius preserves profile accuracy on narrow features. The listed 7° free angle and T3 thickness contribute to a rigid tool-pack that minimises vibration and supports repeatable dimensional control in serial production. Productivity and process security in daily use Designed to withstand the thermal and mechanical loads typical of machining titanium alloys, superalloys and rostfreier Stahl, this insert improves throughput by maintaining a sharp, stable edge over longer cycles. The MM4 chip control helps evacuate chips reliably, lowering the risk of built-up edge and unplanned stops. By combining a modern coating system with a purpose-built geometry, the insert reduces downtime and supports a predictable machining window — a decisive advantage for shops seeking to increase output with consistent part quality. For reliable machining of rostfreier Stahl and high-temperature alloys, specify the Walter Tools DCGT11T304-MM4 WSM10S through Metav Werkzeuge and request tailored application support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: DCGT11T304-MM4-WSM10S-WALTER Manufacturer: Walter Tools Product type: Turning insert Series: Tiger·tec Silver Grade: WSM10S Designation: DCGT11T304-MM4 WSM10S Core technical data Corner radius: 0.4 mm Free angle: 7° Inscribed circle / size: 11 mm Thickness: T3 Tolerance class: G Special features Coating technology: Tiger·tec Silver Carbide class: coated carbide (WSM10S) Plate form: Rhombic 55° Chipbreaker: MM4 Material suitability: rostfreier Stahl; heat-resistant superalloys and titanium FAQ What materials is this insert suitable for? The DCGT11T304-MM4 WSM10S insert from Walter Tools is suitable for rostfreier Stahl and heat-resistant superalloys, offering high thermal resistance and stable chip control. How does the Tiger·tec Silver coating help in production? Tiger·tec Silver on WSM10S reduces adhesion and flank wear, improving tool life and enabling more consistent machining cycles with the DCGT11T304-MM4 insert. Which geometry features ensure dimensional accuracy? The rhombic 55° plate form and 0.4 mm corner radius provide a balance between engagement and rigidity, supporting repeatable part dimensions when using the DCGT11T304-MM4 WSM10S. Is the MM4 chipbreaker suitable for finishing operations? Yes, the MM4 chipbreaker is designed to support controlled chip formation across a range of feeds, helping maintain surface quality during light finishing passes with this insert. How is the insert designation interpreted? DCGT11T304-MM4 denotes the insert geometry and size; WSM10S identifies the Walter Tools coated carbide grade within the Tiger·tec Silver family used for demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGT11T304-MM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a 0.4 mm corner radius and robust MM4 chip control to secure consistent performance when machining stainless steel and heat-resistant superalloys; order the Walter Tools inserts directly via Metav Werkzeuge or consult the technical team for application support. DCGT11T304-MM4 WSM20S turning insert — Walter Tools, Tiger·tec Silver, 7° relief, 0.4 mm radius A DCGT11T304-MM4 WSM20S turning insert designed for medium to heavy duty turning of stainless steel and heat-resistant superalloys, combining a rhombic 55° form with Tiger·tec Silver coating for enhanced thermal resistance and edge stability. Tiger·tec Silver coating for thermal resistance Suited for stainless steel and superalloys Rhombic 55° geometry for versatile turning 0.4 mm corner radius for refined finish Stable edge control for demanding materials The combination of a coated carbide grade and the Tiger·tec Silver technology provides a durable cutting edge that reduces edge wear during prolonged engagement with demanding materials. For components made of stainless steel or nickel-based alloys the insert’s composition supports secure chip formation and helps prevent built-up edge, which in turn maintains dimensional stability and surface quality. The MM4 chipformer is tailored to break and evacuate chips reliably under variable depths of cut, reducing the risk of re-cutting and improving process repeatability. Geometry and finish: consistent surfaces with minimal rework The rhombic 55° form paired with a 0.4 mm corner radius offers a balance between strength and finish quality. This geometry allows reliable plunge and profiling operations while the modest radius aids in producing a uniform surface without overstressing the cutting edge. The insert’s 7° relief angle reduces rubbing on the flank, lowering heat generation and supporting a better surface condition on the workpiece. As a result, secondary finishing operations can be minimised, supporting shorter cycle times and higher throughput. Application guidance and process reliability When machining heat-resistant alloys and stainless steel, the insert’s coated substrate and robust edge control improve process security under thermally challenging conditions. The DCGT11T304-MM4 WSM20S insert is suitable for toolholders that accept DCGT-style cartridges and performs well in interrupted cuts or components with variable cross-sections. Selecting a stable holder and appropriate clamping, together with a coolant strategy adapted to the workpiece and machine, will amplify the benefits of the insert’s Tiger·tec Silver surface and ensure consistent tool life and part quality. Contact Metav Werkzeuge to discuss application requirements and secure supply of Walter Tools DCGT11T304-MM4 WSM20S turning inserts for specific stainless steel or superalloy tasks Technical Data SKU: DCGT11T304-MM4-WSM20S-WALTER Label: Drehwendeschneidplatte DCGT11T304-MM4 WSM20S Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte / turning insert Series: Tiger-tec Silver Grade: WSM20S ISO designation: DCGT11T304-MM4 WSM20S Facts Size: 11 mm Corner radius: 0.4 mm Relief angle: 7° Plate form: Rhombus 55° Plate thickness: T3 Chipbreaker: MM4 Tolerance class: G Special features Tiger·tec Silver coating Coated carbide material Suited materials: stainless steel; heat-resistant superalloys (S) Robust chip control MM4 Rhombic 55° geometry for versatile applications Designed for demanding turning operations FAQ What materials is this insert designed for? The DCGT11T304-MM4 WSM20S insert from Walter Tools is formulated for machining stainless steel and heat-resistant superalloys, offering improved chip control and edge stability for those material groups. How does the Tiger·tec Silver coating benefit the cutting process? Tiger·tec Silver on the DCGT11T304-MM4 WSM20S increases thermal resistance and reduces abrasive wear, which extends usable edge life and maintains consistent cutting performance in thermally demanding applications. When is the 0.4 mm corner radius recommended? A 0.4 mm corner radius on this turning insert supports a fine surface finish while retaining sufficient edge strength for general turning and light profiling; it is particularly useful where reduced post-process finishing is desired. Which operations suit the rhombic 55° geometry and MM4 chipformer? The rhombic 55° form combined with the MM4 chipbreaker makes the insert versatile for facing, longitudinal turning and medium-depth profile work, with reliable chip breakage in variable cutting conditions. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGT11T304-MN2 WN10 Wendeplatten - Walter Tools
Benefit from a compact combination of precision geometry and reliable chip control: the open-series Walter WN10 uncoated carbide grade delivers consistent edge behaviour and economical performance, while the MN2 chipbreaker promotes stable chip formation for dependable turning results; order the insert directly via Metav Werkzeuge or consult their advisers for application guidance. DCGT11T304-MN2 WN10 — Rhombic 55° turning indexable insert by Walter Tools The DCGT11T304-MN2 WN10 is a rhombic 55° turning indexable insert engineered for general turning applications, offering a 0.4 mm corner radius and an MN2 chipbreaker for controlled material removal Rhombic 55° geometry for versatile turning Uncoated carbide WN10 for consistent edge stability MN2 chipbreaker ensures stable chip formation 0.4 mm corner radius for fine surface finishing Precision and predictable performance for general turning The open-series grade WN10 is an uncoated carbide option designed to provide stable edge behaviour in a wide range of conventional turning tasks. The rhombic 55° geometry combines accessibility for facing and light profiling with a compact cutting edge that supports repeatable results. For production environments where predictable tool life and reproducible finishes matter, this insert’s construction and grade selection reduce process variation and simplify tool inventory management. Controlled chip formation that supports process security Equipped with the MN2 chipbreaker, this turning insert improves chip control during interrupted and continuous cuts, lowering the risk of entanglement and secondary operations. The moderate relief angle of 7° and the 0.4 mm corner radius balance cutting strength with surface quality, allowing efficient material removal while maintaining a fine final contour. In practice, the combination of geometry and chipbreaker reduces machine downtime associated with poor chip evacuation and supports steady cycle times. Compact dimensions that favour finishing and accessibility The insert’s size (11 mm ground seating and T3 thickness) and the defined corner radius make it suitable for finishing passes and confined areas where larger tools cannot reach. The standardised ISO-style designation and the indexable format allow rapid index changes and straightforward seat replacement, lowering non-productive time. When paired with appropriate holders, this insert contributes to a cost-effective machining strategy by extending usable edge rotations and maintaining consistent surface quality. For availability and tailored advice on Walter Tools' WN10 inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable grades and holder combinations Technical Data Article number: DCGT11T304-MN2-WN10-WALTER Label: Drehwendeschneidplatte DCGT11T304-MN2 WN10 Walter Tools Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Insert form: Rhombus 55° Insert size: 11 Thickness: T3 Tolerance class: G Special features Grade: WN10 (uncoated carbide) Chipbreaker: MN2 Series: Walter Schneidstoffsorte - Serie offen Execution: T ISO designation: DCGT11T304-MN2 WN10 Base designation: DCGT11T304-MN2 FAQ What materials is this insert intended for? Material suitability should be checked against the product matrix; the WN10 grade is an open-series uncoated carbide grade intended for a broad range of conventional turning tasks and requires validation against specific workpiece materials. Can the insert be indexed to a fresh cutting edge? Yes, the indexable design allows edge rotation and replacement; the DCGT format supports multiple effective edges for economical use of the insert. How does the MN2 chipbreaker influence surface finish? The MN2 chipbreaker is designed to produce short, manageable chips and to support consistent cutting forces, which assists in achieving uniform surface quality with reduced risk of machining marks. Is this compatible with standard DCGT toolholders? The insert follows standard DCGT geometry and the ISO-style designation, so it is compatible with holders designed for rhombic 55° DCGT inserts, provided the seat and clamping match the specified size. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and brand names are the property of their respective owners. Brand names and protected product names are used for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product from the manufacturer.
DCGT11T304-MN2 WNN10 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of durable WNN10 coated carbide, precise Rhombic 55° geometry and reliable MN2 chip control for steady turning performance; order directly via Metav Werkzeuge or contact our specialists for technical clarification. DCGT11T304-MN2 WNN10 indexable turning insert — Walter Tools, Rhombic 55°, MN2 chipbreaker The DCGT11T304-MN2 WNN10 is a coated carbide turning insert designed for general turning applications where stable chip formation and consistent edge life are required. Coated carbide grade WNN10 Rhombic 55° insert geometry 0.4 mm corner radius for fine detail MN2 chipbreaker for stable chip control Consistent chip control for uninterrupted production The combination of the MN2 chipbreaker and the coated carbide WNN10 grade provides controlled chip formation that reduces interruptions during continuous turning cycles. Stable chips lower the risk of built-up edge and help maintain a predictable cutting process. For production environments seeking improved machine uptime, this insert supports a steady material removal rate while helping to protect the toolholder from erratic chip behaviour. Geometry and edge definition for precise surface quality The Rhombic 55° geometry paired with a 0.4 mm corner radius delivers a balance between edge strength and finish capability. The moderate corner radius allows for accurate dimensional control on finishing passes, while the 55° lead angle improves access in close-tolerance features. The insert’s 7° relief angle helps to minimise rubbing and heat generation at the cutting edge, contributing to consistent surface quality and repeatable results across batches. Robust grade and construction for reliable tool life Built in the Walter Tools range, the WNN10 grade is a coated carbide specification developed for broad applicability in turning operations. The coating enhances wear resistance and supports longer intervals between indexings, which can reduce downtime and handling. The insert’s T3 plate thickness and the solid construction provide stability in the cutting zone, helping to maintain edge integrity under varying cutting conditions. Practical fit and application guidance The insert’s sizing and tolerance class are suitable for standard insert clamping systems and precision toolholders. The combination of Rhombic 55° geometry and the MN2 chipbreaker makes it appropriate for routine turning tasks where a compromise between productivity and surface finish is required. For exact material suitability and optimal cutting data, consult the product matrix or speak with Metav Werkzeuge’s technical advisors to align the insert with the workpiece material and machining strategy. For tailored guidance on using Walter Tools turning inserts such as the DCGT11T304-MN2 WNN10, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application specifics and availability Technical data Article number: DCGT11T304-MN2-WNN10-WALTER Designation: DCGT11T304-MN2 WNN10 Manufacturer: Walter Tools Product type: Drehwendeschneidplatte / turning insert Facts Relief angle: 7° Corner radius: 0.4 mm Insert size: 11 Thickness: T3 Tolerance class: G Special features Coating / grade: WNN10 (coated carbide) Geometry: Rhombic 55° Chipbreaker: MN2 Series: Walter Schneidstoffsorte - Serie offen Execution: T FAQ What materials is this insert suitable for? The DCGT11T304-MN2 WNN10 insert is a coated carbide grade intended for a broad range of turning tasks; consult the Walter Tools product matrix or Metav Werkzeuge for confirmation of specific material suitability. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker provides controlled chip formation and evacuation, improving process stability when using the DCGT11T304-MN2 WNN10 insert in standard turning operations. Can this insert achieve fine surface finishes? Yes. The combination of the Rhombic 55° geometry and 0.4 mm corner radius supports accurate finishes on finishing passes while maintaining edge strength. Is the insert compatible with standard toolholders? The DCGT11T304-MN2 WNN10 follows common insert sizing and tolerance class standards, making it suitable for most standard turning toolholders designed for 11-size rhombic inserts. What should be checked before use in production? Verify clamping stability, correct seat seating in the toolholder and recommended cutting data as per Walter Tools guidance; Metav Werkzeuge can assist with application-specific parameters. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
DCGT11T304-MN2 WSM01 MN2 Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, a wear-resistant Tiger‑tec Silver grade and a compact 0.4 mm corner radius for steady performance in demanding turning operations; order directly via Metav Werkzeuge or consult our specialists for tailored cutting data. DCGT11T304-MN2 WSM01 indexable turning insert – Walter Tools, Tiger‑tec Silver, MN2 chipbreaker DCGT11T304-MN2 WSM01 is an indexable turning insert designed for heavy-duty turning of stainless steels and heat‑resistant superalloys, offering robust edge stability in demanding production environments. Tiger‑tec Silver coating for high wear resistance MN2 chipbreaker for controlled chip formation Suitable for stainless steels and superalloys Rhombic 55° geometry for versatile turning Consistent cutting performance through optimised grade and geometry The combination of the WSM01 carbide grade and the Tiger‑tec Silver surface treatment delivers predictable edge wear and improved process reliability when machining tough materials. The MN2 chipbreaker is engineered to produce short, controllable chips under interrupted and continuous cuts, reducing cycle variability and downtime. Thanks to the rhombic 55° form and a 0.4 mm corner radius, the insert supports a balance between edge strength and fine finishing, making it suitable for both roughing and medium finishing tasks in demanding production sequences. Efficiency gains from stable chip control and heat-resistant chemistry The coated carbide chemistry is optimised for materials that generate high temperatures and strains at the cutting edge; this insert therefore sustains longer tool life and fewer unexpected tool changes. Stable chip formation lowers the risk of built-up edge and improves surface consistency on components made from stainless materials and nickel‑based alloys. Process planners benefit from the combination of improved uptime and predictable regrind intervals, which simplifies production scheduling and cost calculations for high-value batches. Practical integration and machining recommendations Installed in standard turning toolholders for DCGT‑style inserts, the unit requires conventional clamping torque and straightforward orientation to exploit the 7° relief angle and T3 thickness. For best results with rostfreier Stahl and heat‑resistant alloys, moderate feeds with cut depths matched to holder rigidity are recommended; this approach leverages the insert’s edge stability for reliable dimensional control. Where tighter surface finishes are required, the small corner radius supports fine turning passes without sacrificing durability, while the MN2 geometry maintains chip flow and reduces manual intervention. Contact Metav Werkzeuge to discuss cut‑data, toolholder compatibility and to request the Walter Tools DCGT11T304-MN2 WSM01 for current production needs Technical Data Article number: DCGT11T304-MN2-WSM01-WALTER Series: Tiger‑tec Silver Grade: WSM01 Product type: Indexable turning insert Geometry: Rhombic 55° Chipbreaker: MN2 Designation: DCGT11T304-MN2 WSM01 Facts Corner radius: 0.4 mm Relief angle: 7° Plate size: 11 Thickness: T3 Tolerance class: G Special features Coated carbide grade optimised for heat resistance Intended for stainless steels (M) and superalloys/titanium (S) Robust edge for interrupted cuts Suitable for roughing and medium finishing FAQ Which materials are best machined with this insert? The DCGT11T304-MN2 WSM01 from Walter Tools is engineered for rostfreier Stahl (stainless steels) and heat‑resistant superalloys, offering stable cutting when machining these demanding groups. What advantages does the MN2 chipbreaker provide? The MN2 chipbreaker secures reproducible short chips and consistent evacuation, which improves process reliability and reduces the need for manual chip management during turning operations. Is the insert compatible with standard DCGT toolholders? Yes, the insert matches standard DCGT toolholder systems; correct clamping and seat cleanliness are essential to exploit the 0.4 mm corner radius and the 7° relief for optimal performance. How does the Tiger‑tec Silver series affect tool life? The Tiger‑tec Silver surface treatment enhances wear resistance and thermal stability, resulting in longer service intervals and more predictable tool‑change planning in serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and product names are the property of their respective owners. Protected brand names and trade designations are mentioned solely for explanation. There is no affiliation between our company and the listed brands. The offered item is an original, factory‑new product of Walter Tools.
DCGT11T304-MP4 WPP10G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold wear resistance, a controlled MP4 chipbreaker and a precise 0.4 mm corner radius delivers reliable, repeatable turning of steels with reduced tool changes and stable chip formation — order directly via Metav Werkzeuge or request application advice from the consultants. DCGT11T304-MP4 WPP10G — Turning indexable insert, Rhombus 55° (MP4 chipbreaker), Walter Tools The DCGT11T304-MP4 WPP10G is a coated carbide turning indexable insert optimised for ISO P steels, designed to combine long tool life and stable cutting for general and demanding turning operations. Tiger·tec Gold coating for extended life MP4 chipbreaker for predictable chip control Rhombus 55° geometry for versatile turning operations 7° clearance angle with 0.4 mm corner radius Improved productivity through wear-resistant grade and chip control The combination of the WPP10G grade and the Tiger·tec Gold coating provides a clear production advantage: longer tool life and consistent cutting-edge behaviour when machining steels. As a coated carbide grade developed for steel applications, this insert reduces unplanned tool changes and supports higher material removal rates through steady flank wear characteristics. The MP4 chipbreaker has been engineered to shape and evacuate chips reliably, which in turn reduces interruptions from chip-related issues and improves cycle time predictability. In practical terms, this means fewer stoppages, more components produced per tool and improved overall equipment effectiveness on turning centres. Geometry that balances strength and surface quality The rhombic 55° form and the 7° clearance angle offer a balanced approach between insert strength and cutting accessibility. The 0.4 mm corner radius provides a reinforced cutting edge that resists chipping under intermittent cuts while still producing acceptable surface finishes for many turned parts. This geometry reduces the risk of edge collapse in heavier cuts and supports consistent dimensional results without frequent rework. Where a finer finish is required, the robust corner radius also allows for modest depth-of-cut adjustments without compromising repeatability. Clear material focus and application scope Designed for machining steels according to ISO group P, the insert suits unalloyed and alloyed steels where typical heat generation and chip formation patterns occur. The WPP10G grade offers a balance of wear resistance and toughness: it is particularly effective in applications demanding a reliable, long-lived edge. The construction and coating combination is intended to provide broad coverage across general turning tasks rather than specialised exotic-material work, so it is an efficient choice for job shops and production lines focused on steel components. Practical selection and handling for production use Adopting this insert in a production environment supports cost-efficiency through extended tool life and predictable behaviour. Proper seat preparation and correct clamp torque ensure secure seating and consistent cutting performance; replacing inserts at a planned wear limit helps avoid sudden failure. Keep spare inserts in the original packaging to protect the cutting edges and log tool life per batch to assess real-world performance. For process optimisation and cutting-parameter recommendations tailored to specific steel grades and machine rigidity, consult the application specialists at Metav Werkzeuge for best results. For reliable steel turning using the Tiger·tec Gold WPP10G grade and MP4 chip control, contact Metav Werkzeuge for availability and tailored application advice. Technical Data SKU: DCGT11T304-MP4-WPP10G-WALTER Designation: DCGT11T304-MP4 WPP10G Product type: Turning indexable insert Brand: Walter Tools Series: Tiger·tec Gold Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 11 Plate form: Rhombus 55° Chipbreaker: MP4 Plate thickness: T3 Tolerance class: G Special features Coating: Tiger·tec Gold Grade: WPP10G (coated carbide) Material group suitability: Steel (ISO P) Robust geometry for general turning applications FAQ What materials is this insert best suited for? The DCGT11T304-MP4 WPP10G from Walter Tools is intended for ISO P steels, covering unalloyed and alloyed steels common in turning operations. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker on the DCGT11T304-MP4 promotes predictable chip formation and evacuation, reducing interruptions and improving cycle-time reliability. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold coating on the WPP10G grade enhances wear resistance and helps to extend tool life when machining steels under typical turning conditions. Is the 0.4 mm corner radius suitable for finishing cuts? A 0.4 mm corner radius provides a durable cutting edge that balances strength and surface finish; for very fine finishes, adjust cutting parameters or select a smaller radius where applicable. Can the DCGT11T304-MP4 be used for interrupted cuts? Yes — the combination of coated carbide grade and the 0.4 mm corner radius gives improved resistance against chipping during intermittent cutting typical in many turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGT11T304-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance, MP4 chip control and a versatile rhombic geometry for productive turning of steels; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific cutting data. DCGT11T304-MP4 WPP20G turning insert for steel – Walter Tools (Tiger·tec Gold, MP4) The DCGT11T304-MP4 WPP20G is a coated carbide turning insert in a 55° rhombic form, engineered for efficient steel turning with optimised chip control. Tiger·tec Gold coating for durable performance MP4 chipbreaker for improved chip control Rhombic 55° form for versatile turning Optimised for steel (P) machining Longer tool life from modern coating technology The combination of Tiger·tec Gold technology and a coated carbide substrate delivers extended tool life under the thermal and mechanical loads common in steel turning. The advanced coating reduces flank and crater wear, which in turn extends uninterrupted cutting periods and reduces tooling changes. This results in more consistent cycle times on production runs and improved process economy when machining unalloyed and alloyed steel (P) grades. Reliable chip control and stable geometry for repeatable results The MP4 chipbreaker is tuned for controlled chip formation when cutting steels, improving swarf evacuation and reducing the risk of chip re-cutting. Combined with the rhombic 55° insert geometry and a 0.4 mm corner radius, the geometry stabilises cutting forces and supports a good surface finish with predictable tool engagement. These attributes support higher feeds and safer interruption recovery, making the insert suitable for a wide range of general turning tasks. Consistent productivity in steel turning operations With tolerance class G, a compact insert size and the proven Walter Tools series design, the item offers reproducible performance across multiple toolholders and machines. The grade WPP20G is positioned for balanced wear resistance and toughness, allowing economical machining of typical steel families according to ISO classification. For process planners, this translates into reliable tool life estimates and simpler grade selection for standard turning operations. For application support or to source the DCGT11T304-MP4 WPP20G from Walter Tools with tailored cutting data, contact Metav Werkzeuge for immediate advice and fast availability. Technical data Article number: DCGT11T304-MP4-WPP20G-WALTER Designation: DCGT11T304-MP4 WPP20G Product type: Turning insert Brand: Walter Tools Facts Corner radius: 0.4 mm Relief angle: 7° Insert size: 11 mm Thickness: T3 Tolerance class: G Special features Grade/Coating: Tiger·tec Gold, coated carbide Chipbreaker: MP4 Shape: Rhombic 55° Material group: Steel (P) Base designation: DCGT11T304-MP4 FAQ What materials is this insert designed for? The DCGT11T304-MP4 WPP20G is optimised for machining steel (P) grades, covering unalloyed and alloyed steels typical in ISO P classifications. What does the grade WPP20G indicate? WPP20G is Walter Tools' Tiger·tec Gold grade, a coated carbide formulation balanced for wear resistance and toughness in steel turning applications. Which chipbreaker is fitted and what are the benefits? The insert uses the MP4 chipbreaker for improved chip control and safer swarf evacuation, which helps maintain surface quality and reduce tool interruptions. How does the 55° rhombic geometry affect machining? The rhombic 55° form offers versatile approach angles for general turning; combined with a 0.4 mm corner radius it provides a reliable compromise between strength and surface finish. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named manufacturers. The offered article is an original, factory-new product from the stated manufacturer.
DCGT11T304FS-1 WDN10 Wendeplatten - Walter Tools
Take advantage of the combination of long tool life and consistent edge geometry for fewer tool changes and predictable part quality; order directly via Metav Werkzeuge or consult our specialists for application advice. DCGT11T304FS-1 WDN10 indexable turning insert by Walter Tools — PCD grade, rhombic 55° geometry The DCGT11T304FS-1 WDN10 is an indexable turning insert designed for high-wear applications on abrasive non-ferrous materials, combining a PCD cutting grade with a compact rhombic form for reliable chip control. PCD grade WDN10, high wear resistance Rhombic 55° geometry for versatile turning 7° clearance angle for secure cutting engagement 0.4 mm corner radius for consistent surface finish Extended life on abrasive, non-ferrous materials The primary benefit of the PCD-based WDN10 grade is its exceptional wear resistance when machining abrasive, non-ferrous workpieces. Polycrystalline diamond material retains a sharp cutting edge far longer than conventional carbides in these applications, which translates into fewer tool changes, reduced machine downtime and a steadier production rhythm. For production planners this means improved process stability and predictable replacement intervals without sacrificing surface quality. Stable edge geometry for reproducible part quality The insert’s Rhombic 55° shape together with the 7° clearance and a 0.4 mm corner radius supports consistent cutting engagement and helps maintain a dependable contact geometry across indexed corners. This combination reduces vibration and supports stable cutting forces, resulting in improved dimensional repeatability and surface finish on turned components. The compact thickness T3 and tolerance class G further assist in maintaining interchangeability and precise seating in the toolholder. Controlled chip formation and machining suitability Equipped with chipbreaker 1, this insert promotes predictable chip formation in typical PCD applications. The grade and chipbreaker choice are optimised for abrasive, non-ferrous materials; however, workpiece suitability should be checked against the product matrix before final selection. The series information indicates an open Walter grade family, allowing selection of matching toolholders and parameters to align with specific production requirements and machining strategies. Practical production and economic considerations Using a PCD insert such as this indexable turning insert reduces the frequency of regrinding and replacement compared with conventional grades in abrasive materials, contributing to lower labour and tooling overheads in serial machining. Fewer interruptions for tool handling and consistent edge life help to streamline set-up and quality assurance processes, supporting higher output and better overall cost control over longer production runs. Contact Metav Werkzeuge to discuss the DCGT11T304FS-1 WDN10 application suitability and to request a tailored recommendation or quotation from our specialists Technical data Article number: DCGT11T304FS-1-WDN10-WALTER Name: DCGT11T304FS-1 WDN10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Core specifications Clearance angle: 7° Corner radius: 0.4 mm Insert size: 11 Thickness: T3 Shape: Rhombic 55° Tolerance class: G Materials and features Grade: WDN10 (PCD) Chipbreaker: 1 Material specification: Katalogabhängig Application note: Check product matrix for workpiece suitability FAQ Which materials is this insert primarily intended for? The DCGT11T304FS-1 WDN10 indexable turning insert with WDN10 PCD grade is primarily intended for abrasive, non-ferrous materials; compatibility should be verified against the product matrix. Can the insert be used for machining steel? The Walter Tools DCGT11T304FS-1 WDN10 is specified for PCD applications and is not intended as a general-purpose steel insert; steel machining suitability is not indicated for this grade. What does the WDN10 designation mean? WDN10 denotes Walter’s PCD grade within the specified series; it identifies a polycrystalline diamond cutting material optimised for high wear resistance on abrasive non-ferrous workpieces. How does the 0.4 mm corner radius affect the process? A 0.4 mm corner radius offers a balance between edge strength and surface finish, improving load distribution on the cutting edge while supporting better part aesthetics and dimensional control. How should the insert be specified when ordering? Specify the full article number or SKU (DCGT11T304FS-1-WDN10-WALTER) together with the required toolholder data to ensure correct selection and compatibility. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for identification purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
DCGT11T304FS-M1 WDN10 Wendeplatten - Walter Tools
The combination of PKD cutting grade (WDN10) and a rhombic 55° geometry ensures long life and consistent performance when machining abrasive, non‑ferrous materials; the robust M1 chipbreaker and 0.4 mm corner radius deliver stable chip control and fine edge definition. Order the insert directly via Metav Werkzeuge or consult the Metav team for application-specific guidance. DCGT11T304FS-M1 WDN10 turning indexable insert by Walter Tools — PKD grade, rhombic 55° The DCGT11T304FS-M1 WDN10 is a rhombic 55° turning insert with a PKD cutting grade designed for productive machining of abrasive, non‑ferrous materials and specialised turning applications PKD grade for abrasive non‑ferrous materials Rhombic 55° geometry for versatile turning 7° relief angle for stable cutting 0.4 mm corner radius for precise edge definition Reliable wear resistance for abrasive non‑ferrous machining The insert uses a PKD (polycrystalline diamond) grade, providing exceptional wear resistance when machining abrasive, non‑ferrous workpieces. This makes the component particularly suitable for high‑abrasion applications such as machining fibre‑filled composites, graphite or certain non‑ferrous alloys. The WDN10 grade balances edge robustness and wear life to reduce downtime and increase productive cutting time. For unfamiliar materials, checking the product matrix and machining parameters is recommended to confirm optimal performance. Geometry that improves process stability and surface quality A rhombic 55° configuration paired with a 7° relief angle offers a controlled cutting approach and reduced radial load on the toolholder. The M1 chipbreaker promotes predictable chip formation and evacuation, lowering the risk of built‑up edge and improving surface finish. The 0.4 mm corner radius helps maintain edge integrity for fine turning tasks while supporting repeatable dimensional stability across production runs. Application guidance and material suitability This insert is targeted at turning tasks on abrasive, non‑ferrous substrates; the PKD grade is not intended for machining hardened steels or standard ferrous materials. The specification "T3" indicates the insert thickness series, and the size "11" denotes the insert dimension class. Prior to series production, validate cutting data and coolant or lubrication strategy against the material to ensure optimal tool life and part quality. Consult material‑specific parameters in the technical matrix where necessary. Economic and process benefits in production environments By combining a wear‑resistant PKD grade with a geometry designed for stable chip control, the insert reduces frequency of index changes and rework, contributing to improved process efficiency. The robust edge life of the WDN10 grade typically lowers tooling costs per component in abrasive turning operations and supports consistent quality in medium to high volume manufacture. Integration into established toolholders for rhombic 55° inserts is straightforward, facilitating rapid replacement and minimal setup time. For application advice and to source Walter Tools turning inserts such as the DCGT11T304FS-M1 WDN10, contact Metav Werkzeuge for tailored recommendations and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DCGT11T304FS-M1-WDN10-WALTER Designation: DCGT11T304FS-M1 WDN10 Type: Turning indexable insert Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Insert size: 11 Thickness: T3 Tolerance class: G Special features Grade: WDN10 (PKD) Geometry: Rhombic 55° Chipbreaker: M1 Series: Walter Schneidstoffsorte - Serie offen Material: Katalogabhängig Execution: T FAQ What materials is this insert intended for? The DCGT11T304FS‑M1 WDN10 insert uses a PKD grade and is intended primarily for abrasive, non‑ferrous materials and composites where polycrystalline diamond shows superior wear resistance. Can this insert be used on steel or stainless steel? PKD grades such as WDN10 are generally unsuitable for conventional steels and stainless steels; the DCGT11T304FS‑M1 WDN10 is optimised for non‑ferrous and abrasive substrates. How does the M1 chipbreaker influence machining performance? The M1 chipbreaker on this insert promotes controlled chip formation and evacuation, improving surface finish and reducing cutting disturbances during turning operations. What does the designation T3 and size 11 indicate? "T3" refers to the insert thickness series and "11" denotes the insert size class for the rhombic 55° form; these influence stability in the toolholder and the suitable cutting parameters. Is there any preparatory check recommended before series production? It is advisable to verify the insert's suitability for the specific workpiece material and to fine‑tune cutting data according to the material matrix before committing to high‑volume production with the DCGT11T304FS‑M1 WDN10. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenrechte und Warenbezeichnungen liegen bei ihren jeweiligen Eigentümern. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
DCGT11T304M-FP2 WEP10C Wendeplatten - Walter Tools
Benefit from the combination of Walter Cermet durability, controlled chip formation via the FP2 chipbreaker and the 55° rhombic geometry for repeatable finishing results; order the DCGT11T304M-FP2 WEP10C insert directly via Metav Werkzeuge or ask our consultants for application-specific guidance. DCGT11T304M-FP2 WEP10C indexable turning insert — Walter Tools (Walter Cermet, Rhombic 55°, 7° relief) The DCGT11T304M-FP2 WEP10C is an indexable turning insert engineered for precision finishing and reliable chip control in turning operations, combining a cermet-grade cutting material with a rhombic 55° geometry. Walter Cermet grade WEP10C Rhombic 55° shape for flexible toolpaths FP2 chipbreaker for controlled chips 0.4 mm corner radius for fine finishes 7° relief angle for stable cutting Superior surface quality and wear resistance through cermet technology The Walter Cermet grade WEP10C is formulated to deliver improved surface finishes and extended edge life compared with conventional grades. As a cermet material it combines the hardness of ceramics with the toughness of metallic binders, which supports lower built-up edge formation and smoother part surfaces. The modest 0.4 mm corner radius helps achieve fine contours while maintaining dimensional control, and the specification of tolerance class G signals consistent manufacturing accuracy for predictable tool behaviour. These characteristics make this insert particularly suitable where finishing quality and repeatable performance are priorities. Reliable chip control and stable cutting for efficient cycles Controlled chip formation is provided by the FP2 chipbreaker, designed to break and evacuate chips reliably under varying cutting conditions. Combined with the 55° rhombic shape and a 7° relief angle, the geometry ensures a stable cutting engagement and reduced vibration, which in turn protects the cutting edge and improves process robustness. This leads to fewer interruptions for chip clearing and supports longer uninterrupted cycle times—an advantage for production environments seeking measurable gains in productivity and process reliability. Flexible mounting and compact design for diverse toolholders The insert follows the DCGT format and is specified in size 11 with a T3 thickness, enabling straightforward integration into standard toolholder systems that accept this geometry. The compact profile and rhombic configuration allow machining on angled surfaces and in tight setups where access is limited. The DCGT format also supports straightforward indexability for multiple edge uses, offering economical use of each insert and simplified tool change routines in the workshop. Selection guidance and verification for material suitability Material compatibility for this Cermet grade is catalogue-dependent; the product documentation should be checked against the specific workpiece materials and machining parameters. The product description notes that the sort usage must be verified with the concrete product matrix, so customers are advised to confirm the recommended cutting data and application ranges before series production. This approach ensures the insert is matched to the component material and cutting strategy, maximising both tool life and part quality. For tailored advice on implementing Walter Tools cermet inserts and to confirm suitability for specific components, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct application support Technical data Article number: DCGT11T304M-FP2-WEP10C-WALTER Designation: DCGT11T304M-FP2 WEP10C Product type: indexable turning insert Series: Walter Cermet Facts Insert size: 11 Relief angle: 7° Corner radius: 0.4 mm Thickness: T3 Tolerance class: G Special features Grade: WEP10C (Cermet) Chipbreaker: FP2 Shape: Rhombic 55° Format: DCGT Material details: catalogue-dependent FAQ What materials is this cermet insert suited for? Material suitability is catalogue-dependent; check the product matrix to confirm whether the DCGT11T304M-FP2 WEP10C is recommended for a specific workpiece material. How does the FP2 chipbreaker influence machining? The FP2 chipbreaker on the DCGT11T304M-FP2 WEP10C promotes controlled chip formation and evacuation, improving process stability and reducing interruptions for chip management. Can this insert be indexed for multiple cutting edges? Yes, the DCGT format of this indexable turning insert permits indexing to use multiple cutting edges, supporting economical tool usage and simplified tool changes. Which feature most affects surface finish? The cermet composition of the WEP10C grade combined with the 0.4 mm corner radius primarily contributes to improved surface finish and reduced built-up edge tendencies during finishing cuts. Is the insert compatible with standard DCGT toolholders? The insert follows the DCGT geometry and is intended for holders designed for this format; verify holder specifications to ensure correct fit and clamping. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods of the manufacturer.
DCGT11T304ML-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Combining the Walter Cermet grade WEP01C with the FX4 chipbreaker, this turning insert delivers stable chip control and a consistently fine surface finish. The rhombic 55° geometry with a 0.4 mm nose radius and 7° clearance supports precise finishing passes and predictable tool life. Order the insert directly via Metav Werkzeuge or contact the technical consultants for application support. DCGT11T304ML-FX4 WEP01C — Turning insert, rhombic 55°, 0.4 mm nose radius — Walter Tools The DCGT11T304ML-FX4 WEP01C is a rhombic 55° indexable turning insert designed for finishing and semi-finishing operations, combining a cermet cutting grade with a dedicated chipbreaker for improved surface quality and chip control Walter Cermet grade WEP01C for stable cutting FX4 chipbreaker for improved chip control Rhombic 55° geometry for versatile turning 0.4 mm nose radius and 7° clearance Precision finishing with cermet performance The cermet-based Walter Cermet grade WEP01C is formulated to provide a balance between wear resistance and surface integrity; when combined with the FX4 chipbreaker, the result is a controlled chip formation that helps maintain consistent cutting forces and surface finish. This combination is particularly suitable for operations where a fine turned surface and dimensional consistency are priorities. The insert’s properties reduce the frequency of unplanned tool changes, supporting efficient production sequences and lower overall process costs. Material suitability and selection guidance Material suitability for this insert should be verified against the manufacturer’s product matrix. The cermet composition is typically selected for enhanced finishing on a range of alloys; however, exact performance depends on workpiece material and machining parameters. When the workpiece specification is unclear, the product matrix and cutting data should be consulted to confirm whether the WEP01C grade and the FX4 chipbreaker match the intended application, ensuring consistent results and minimised trial-and-error. Geometry that supports accuracy and surface quality The rhombic 55° shape and a 0.4 mm nose radius provide a geometry optimised for precise profile control and fine surface generation on turning operations. The modest nose radius reduces cutting forces for finishing passes while the 7° clearance angle helps prevent rubbing at the flank, which is particularly important during low-depth cuts. The T3 plate thickness contributes to stable seating in the toolholder and predictable mechanical rigidity, improving repeatability in serial production. Reliability, tolerances and process integration Tolerance class G and the standard ISO designation facilitate interchangeability and predictable fit in common toolholders. The ISO naming and dimensions make it straightforward to verify compatibility with existing tool systems; spare-part logistics and tool management benefit from this clarity. As a component from Walter Tools, the insert is manufactured under stable production standards, supporting reliable batch-to-batch performance and long-term process consistency. Contact Metav Werkzeuge for tailored application advice and secure supply of Walter Tools turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt consultation and delivery options Technical data Article number: DCGT11T304ML-FX4-WEP01C-WALTER Label: Drehwendeschneidplatte DCGT11T304ML-FX4 WEP01C Walter Tools Manufacturer: Walter Tools Product type: Turning insert Grade: WEP01C Series: Walter Cermet Key dimensions Insert size: 11 Thickness: T3 Clearance angle: 7° Nose radius: 0.4 mm Tolerance class: G Design & features Rhombic 55° plate form FX4 chipbreaker Cermet cutting grade Catalog-dependent material specification ISO designation: DCGT11T304ML-FX4 WEP01C FAQ What materials is this insert suitable for? Material suitability must be checked in the manufacturer’s product matrix; the DCGT11T304ML-FX4 WEP01C is a cermet-grade insert and may be suitable for finishing a range of alloys depending on the specific workpiece. How does the FX4 chipbreaker affect machining? The FX4 chipbreaker is designed to improve chip control and reduce built-up edge, helping the Walter Tools insert to produce more consistent surface finishes and stable cutting conditions. Is the insert compatible with standard ISO toolholders? The ISO designation and standard dimensions of DCGT11T304ML-FX4 WEP01C enable compatibility checks with common toolholders; tolerance class G supports predictable fitment. What benefits does the 0.4 mm nose radius provide? A 0.4 mm nose radius supports fine finishing passes by lowering cutting forces and enabling accurate profile control with reduced risk of chatter during light cuts. How should one verify the best cutting data for this insert? Cutting data and recommended parameters for the DCGT11T304ML-FX4 WEP01C are provided by the manufacturer’s cutting data sheets and should be referred to for optimised feed, speed and depth settings. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are stated for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory-new goods of the manufacturer.
DCGT11T304MR-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Benefit from the combination of the Walter Cermet WEP01C grade, the FX4 chipbreaker and a 7° clearance angle for predictable finishing performance and stable chip control; order the insert directly via Metav Werkzeuge or request application advice from our consultants. DCGT11T304MR-FX4 WEP01C — Indexable turning insert, Walter Cermet with FX4 chipbreaker by Walter Tools The DCGT11T304MR-FX4 WEP01C is an indexable turning insert developed for high-quality finishing operations where consistent edge life and controlled chip formation are required Walter Cermet WEP01C for consistent edge life FX4 chipbreaker for controlled chip formation 7° clearance angle for smooth finishing Rhombus 55° shape for versatile turning Consistent finishing and reliable tool life The DCGT11T304MR-FX4 WEP01C indexable turning insert combines the Walter Cermet grade WEP01C with a geometry optimised for finishing, delivering a stable cutting edge and improved surface integrity on turned components. Cermet grades are engineered for a balance of hardness and toughness; this results in extended edge life and predictable wear behaviour during light to medium finishing cuts. For production environments that prioritise repeatable part quality, the cermet composition helps to maintain dimensional accuracy over longer tool life cycles while reducing the frequency of insert changes. Controlled chip formation for secure machining The integrated FX4 chipbreaker is designed to fragment chips reliably under finishing conditions, which reduces the risk of long, entangling swarf and improves evacuation from the cutting zone. Controlled chip formation lowers the mechanical load on the tool and machine, contributing to stable machining and consistent surface finish. For shops aiming to enhance process stability, this chip control also simplifies coolant flow and swarf management, making the insert a practical choice where predictable chip behaviour is required. Geometry that improves access and surface quality The Rhombus 55° profile combined with a 0.4 mm corner radius and 7° clearance gives a favourable balance between edge strength and access to narrow features. The modest corner radius supports fine finishing without compromising local edge robustness, while the clearance angle helps to avoid rubbing and reduces built-up edge on sensitive materials. The plate thickness T3 and compact size 11 provide the rigidity expected for precision turning tasks, enabling improved repeatability when machining complex contours or small-diameter workpieces. Selection guidance and application support Material suitability for this insert is catalog-dependent; the WEP01C sort is optimised within the Walter Cermet family but material compatibility should be verified in the manufacturer’s product matrix before final selection. For application recommendations, cutting data and grade selection, Metav Werkzeuge provides tailored advice and can supply the correct insert variant for specific operations. For further technical information or assistance with process integration contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our consultants can help interpret the product matrix and suggest feed and speed values for intended materials. For precise finishing requirements with Walter Tools Cermet inserts, contact Metav Werkzeuge for specific grade recommendations and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DCGT11T304MR-FX4-WEP01C-WALTER Designation: DCGT11T304MR-FX4 WEP01C Product type: Indexable turning insert Series: Walter Cermet Grade: WEP01C Chipbreaker: FX4 Shape: Rhombus 55° Execution: T Tolerance class: G Material: Katalogabhängig Core dimensions Size: 11 Thickness: T3 Corner radius: 0.4 mm Clearance angle: 7° Plate form angle: 55° Special features Cermet grade WEP01C FX4 chipbreaker for chip control Walter Cermet series Check product matrix for material suitability Suitable for finishing operations (verify application) FAQ What is the typical application for this insert? The DCGT11T304MR-FX4 WEP01C indexable turning insert from Walter Tools is aimed at precision finishing operations where consistent edge life and controlled chips are priorities. Which geometry features improve surface finish? The combination of a 0.4 mm corner radius, 7° clearance angle and the Rhombus 55° profile on the DCGT11T304MR-FX4 WEP01C supports reduced rubbing and finer surface quality in finishing passes. Is the WEP01C grade suitable for all materials? Material suitability for the WEP01C cermet grade depends on the specific product matrix; users should consult the Walter product matrix or contact Metav Werkzeuge to confirm compatibility with the intended material. How does the FX4 chipbreaker help in production? The FX4 chipbreaker provides predictable chip fragmentation under finishing conditions, improving swarf control and reducing the risk of chip entanglement in automated or manual operations. Where can cutting data and selection advice be obtained? Cutting data and grade-selection guidance for the DCGT11T304MR-FX4 WEP01C are available from Metav Werkzeuge; the supplier can advise on feeds, speeds and optimal insert variants for specific machining tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and registered trademarks are stated for clarification only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
DCGT11T308-FL2 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a precise 0.8 mm corner radius and the FL2 chipbreaker to secure consistent chip control and long tool life in steel turning. Order directly via Metav Werkzeuge or consult the Metav team for application advice. DCGT11T308-FL2 DCGT11T308-FL2 WPP20G Turning insert for Steel — WPP20G (Walter Tools) A DCGT11T308-FL2 WPP20G turning insert engineered for robust ISO P (steel) machining, combining Tiger·tec Gold coating and an FL2 chipbreaker for reliable finishing and semi-finishing operations. Tiger·tec Gold coated carbide WPP20G 7° relief angle for stable cutting 0.8 mm corner radius for consistent edge life Rhombic 55° form, size 11 for versatile turning Consistent performance for steel turning The combination of Tiger·tec Gold technology and the WPP20G grade provides a balance of wear resistance and toughness tailored to ISO P materials. This coated carbide composition is optimised for the heat and chip characteristics typical of unalloyed and alloyed steels, delivering predictable tool life under medium to demanding cutting conditions. The result is fewer tool changes, reduced downtime and a reproducible surface finish that supports quality-focused production environments. Precise geometry for reliable chip control The FL2 chipbreaker and the insert’s 7° relief angle work together to promote controlled chip formation and evacuation. The combination reduces the risk of built-up edge and helps maintain cutting stability during interrupted cuts or varying depth of cut. With a 0.8 mm corner radius, the insert offers a strong cutting edge that tolerates moderate feeds while still supporting fine surface finishes, making it suitable for many finishing and semi-finishing tasks. Flexible form factor to suit multiple turning setups The rhombic 55° insert form and size 11 footprint make this grade adaptable to a wide range of tool holders and lathe setups. The T3 plate thickness contributes to edge stability under load, while the insert’s overall geometry supports both light finishing passes and more demanding material removal where a balanced edge is required. This flexibility reduces tooling variants at the shop floor and simplifies inventory management for mixed-production environments. Integration into productive machining processes Designed with practical workshop use in mind, the insert’s tolerance class G ensures repeatable seating and positioning in compatible tool holders, supporting consistent part-to-part accuracy. The grade’s combination of durability and process security helps to improve cycle-time predictability, which in turn contributes to overall process efficiency. When paired with appropriate feeds and speeds for ISO P materials, this turning insert supports a dependable, high-throughput turning strategy. For demanding steel turning tasks, choose the Walter Tools DCGT11T308-FL2 WPP20G for a balance of edge strength and wear resistance; contact Metav Werkzeuge for technical details or application recommendations at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DCGT11T308-FL2-WPP20G-WALTER Label: Drehwendeschneidplatte DCGT11T308-FL2 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Turning insert Grade: WPP20G Series: Tiger·tec Gold Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Rhombic 55° Plate size: 11 Plate thickness: T3 Tolerance class: G Special features Coating and composition: Tiger·tec Gold, coated carbide Chipbreaker: FL2 Material application: Steel (ISO P) Intended use: finishing and semi-finishing steel turning FAQ What materials is this insert suitable for? The DCGT11T308-FL2 WPP20G is specified for steel machining (ISO P); the Walter Tools grade WPP20G is designed to handle the typical heat and chip formation associated with unalloyed and alloyed steels. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP20G grade increases wear resistance while maintaining edge toughness, which helps the DCGT11T308-FL2 insert deliver consistent life and surface quality under steel turning conditions. Which chipbreaker is included on this insert and what is its benefit? The insert features the FL2 chipbreaker, which promotes reliable chip formation and evacuation, improving stability during continuous and interrupted cuts with steel. Can the insert be used for heavy roughing operations? The DCGT11T308-FL2 WPP20G, with its 0.8 mm corner radius and robust coated carbide grade, is suited to many semi-finishing and finishing applications; for heavy roughing, selection should be matched to the specific machining parameters and machine capability. How does the insert geometry affect tool setup? The rhombic 55° form and size 11 make the insert compatible with a broad range of toolholders, while the tolerance class G supports repeatable seating for consistent part accuracy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. No connection exists between our company and the mentioned brands. The offered item is an original, factory-new product of Walter Tools.
DCGT11T308-FL2 WSM01 FL2 Wendeplatten - Walter Tools
Benefit from a robust combination of wear‑resistant cutting grade and precision geometry: the WSM01 carbide grade in the Tiger‑tec Silver series delivers stable cutting edges and consistent chip control via the FL2 chipbreaker for demanding materials. Order the turning insert directly via Metav Werkzeuge or consult our specialists for application advice. Drehwendeschneidplatte DCGT11T308-FL2 WSM01 — Turning insert, FL2 chipbreaker, Tiger‑tec Silver (Walter Tools) A compact turning insert designed for heavy‑duty and difficult‑to‑machine applications, the DCGT11T308-FL2 WSM01 from Walter Tools combines a coated cemented‑carbide grade and a geometry optimised for stainless steels and heat‑resistant alloys. Tiger‑tec Silver coated carbide WSM01 Optimised FL2 chipbreaker for stable chips Suitable for stainless steels and superalloys Rhombic 55° insert, 0.8 mm corner radius Reliable performance for demanding materials The Tiger‑tec Silver series with grade WSM01 provides a wear‑resistant, coated cemented carbide solution developed for high thermal and mechanical loads encountered when machining stainless steels and heat‑resistant superalloys. The composition of the grade promotes stable chip formation and a durable cutting edge, which reduces unexpected tool changes and supports longer uninterrupted runs. This results in improved process reliability and predictable part quality in serial and batch production. Geometry that ensures consistent chip control and surface finish A combination of the FL2 chipbreaker, rhombic 55° form and a 0.8 mm corner radius gives the insert defined chip segmentation and a predictable deformation zone. The modest 7° clearance angle minimises rubbing while preserving edge strength, and the T3 plate thickness contributes to rigidity under interrupted or heavy cuts. Together, these design aspects reduce vibration and improve surface integrity, translating into fewer rework cycles and higher first‑pass yields. Productivity gains and economical operation Using a dedicated grade and cutting geometry tuned for tough alloys reduces cycle times through higher allowable cutting data and fewer tool changes. The coated grade supports sustained cutting performance, lowering per‑part tooling costs and increasing spindle utilisation. In mixed production environments, consolidating to a single, versatile insert like this one simplifies inventory management and supports predictable throughput across multiple stainless and heat‑resistant workpieces. Practical application guidance and system compatibility The insert is well suited for medium to heavy turning operations in conventional and CNC lathes. For optimal results with the DCGT11T308-FL2 WSM01, use rigid clamping, stable toolholders and appropriate coolant strategies for stainless and nickel‑based materials. When paired with the correct holder and parameter window, the insert delivers repeatable dimensional control and a consistent cutting edge life, helping to maintain tight tolerances and surface finishing standards. For tailored tooling recommendations or to order Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for direct support and fast delivery. Technical data SKU: DCGT11T308-FL2-WSM01-WALTER Article: DCGT11T308-FL2 WSM01 Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Size: 11 Corner radius: 0.8 mm Clearance angle: 7° Form: Rhombic 55° Thickness: T3 Chipbreaker: FL2 Series: Tiger‑tec Silver Tolerance class: G Special features Grade: WSM01 (coated cemented carbide) Suitable materials: stainless steels (M), heat‑resistant superalloys / titanium (S) Optimised for secure chip formation and stable cutting edge Designed for difficult‑to‑machine materials and parts with elevated thermal loads FAQ What materials is this insert suitable for? The DCGT11T308-FL2 WSM01 is intended primarily for stainless steels and heat‑resistant superalloys (ISO groups M and S), providing stable cutting performance on materials that generate high heat and tend to work‑harden. How does the FL2 chipbreaker affect machining? The FL2 chipbreaker promotes defined chip segmentation and evacuation, which reduces the risk of long, stringy chips and supports consistent surface finish and tool life when machining difficult materials. What is the importance of the 0.8 mm corner radius? A 0.8 mm corner radius balances edge strength and finish: it increases wear resistance under heavy cuts while still enabling good surface integrity on parts requiring tight tolerances. Is this insert compatible with standard turning holders? The insert fits standard toolholders designed for rhombic 55° indexable inserts and benefits from rigid clamping and correct seat geometry to achieve the specified performance. Which advantages does the Tiger‑tec Silver series provide? Tiger‑tec Silver offers a wear‑resistant coating and substrate pairing that extends tool life under thermal stress and improves process reliability in serial production of difficult‑to‑machine alloys. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Brand names and trademarks are used solely for explanation of compatibility and origin. There is no affiliation between Metav Werkzeuge and the listed manufacturers. The offered article is an original, factory‑new product of the manufacturer (Walter Tools).
DCGT11T308-FM2 WMP20G WMP20G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WMP20G grade delivers reliable performance and extended tool life when machining stainless steel; the FM2 chipbreaker ensures secure chip control under medium to robust cutting conditions. Order the DCGT11T308-FM2 WMP20G directly via Metav Werkzeuge or consult our specialists for application advice. DCGT11T308-FM2 WMP20G — Turning insert with Tiger·tec Gold for stainless steel (Walter Tools) The DCGT11T308-FM2 WMP20G is a rhombic 55° turning insert designed and optimised for machining stainless steel under medium to robust conditions, combining a secure chipbreaker and a robust corner geometry. Tiger·tec Gold coating for extended tool life Optimised for machining stainless steel (M) FM2 chipbreaker for secure chip control Rhombic 55° geometry with 0.8 mm corner radius Consistent performance on stainless steels for production stability The Tiger·tec Gold-based WMP20G grade is formulated to cope with the demands of stainless steel machining: high workpiece ductility, tendency to build-up on the cutting edge and elevated temperatures. The coated cemented carbide substrate offers improved thermal resistance and controlled wear behaviour, which together contribute to long tool life and repeatable process windows. By selecting this grade, workshops gain a balance between edge stability and predictable wear, reducing unscheduled tool changes and supporting a steady production flow. Secure chip control and protected cutting edge for reliable machining The FM2 chipbreaker is engineered to produce short, manageable chips when cutting ductile materials. Combined with the 0.8 mm corner radius and the rhombic 55° insert form, this geometry increases the cutting edge strength and reduces the risk of edge chipping during interrupted cuts. The result is improved surface finishes and lower rework rates. For operators with varied workpiece geometries, the insert's form and chip control reduce machine downtime caused by poor chip evacuation and help maintain consistent cycle times. Practical design details that support versatile turning operations Key design aspects such as the insert thickness T3, size 11 designation and a 7° relief angle contribute to stable seating in standard toolholders and consistent cutting behaviour across batches. The tolerance class G underlines manufacturing precision, ensuring reliable indexing and repeatable positioning in multi-edge turning systems. Where process security and predictable results are priorities, this insert offers a straightforward upgrade path for turning operations that demand both robustness and refined chip management. For precision stainless steel turning rely on Walter Tools' Tiger·tec Gold inserts — contact Metav Werkzeuge for tailored application recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DCGT11T308-FM2-WMP20G-WALTER Designation: DCGT11T308-FM2 WMP20G Product type: Turning indexable insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Facts Grade: WMP20G Coating technology: Tiger·tec Gold Chipbreaker: FM2 Insert form: Rhombic 55° Corner radius: 0.8 mm Relief angle: 7° Thickness: T3 Size: 11 Tolerance class: G Special features Optimised for stainless steel (M) Suitable for medium to robust cutting conditions Coated cemented carbide grade for improved thermal resistance Stable chip formation and edge protection FAQ What materials is this insert suited for? The DCGT11T308-FM2 WMP20G by Walter Tools is optimised for machining stainless steel and performs well under medium to robust cutting conditions. How does the FM2 chipbreaker influence machining? The FM2 chipbreaker produces controlled, short chips that support reliable chip evacuation and improve process safety when turning ductile materials like stainless steel. What does the 0.8 mm corner radius mean for durability? A 0.8 mm corner radius increases edge strength and reduces the likelihood of chipping, supporting longer tool life and consistent surface quality with the DCGT11T308-FM2 insert. Is this insert compatible with standard 55° holders? The rhombic 55° form and T3 thickness ensure compatibility with standard holders designed for this insert family; correct clamping prevents vibration and maintains repeatable results. Where can technical advice for application be obtained? Application guidance for the DCGT11T308-FM2 WMP20G is available from Metav Werkzeuge, where specialists can advise on cutting data and toolholder selection. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no connection between our company and the named brands. The offered item is an original, factory-new product of Walter Tools.
DCGT11T308-FM2 WSM01 WSM01 Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver series performance, the WSM01 grade and a robust rhombic geometry for dependable machining of stainless steels and heat‑resistant alloys; this results in stable chip control and consistent tool life. Order directly via Metav Werkzeuge or consult our specialists for tailored application advice. DCGT11T308-FM2 WSM01 indexable turning insert — Tiger‑tec Silver, for stainless steels and superalloys (Walter Tools) The DCGT11T308-FM2 WSM01 is an indexable turning insert engineered for secure chip formation and edge stability when machining rostfreier Stahl and heat‑resistant superalloys, combining a 55° rhombic form with a 7° relief for versatile turning operations. Tiger‑tec Silver series performance WSM01 grade for stainless & superalloys Rhombus 55° form for versatile turning FM2 chipbreaker for stable chip control Higher productivity through material‑specific grade selection Selecting a carbide grade matched to the workpiece is decisive for process reliability. The WSM01 grade, part of the Tiger‑tec Silver family, is a coated carbide designed for machining rostfreier Stahl and heat‑resistant alloys (ISO groups M and S). This specification promotes stable chip formation and reduces the risk of built‑up edge when cutting tough, thermally demanding materials. By focusing on a material‑adapted grade, cutting parameters can be pushed for improved cycle times while maintaining reproducible tool life. Geometry and chip control that support consistent surface quality The rhombic 55° insert form combined with the FM2 chipbreaker offers a balance between strength and accessibility in turning operations. The insert’s 0.8 mm corner radius and 7° relief angle contribute to a robust cutting edge that resists chipping under intermittent cuts, while the chipbreaker geometry helps evacuate swarf reliably. These attributes result in fewer interruptions for tool changes and a more consistent surface finish, particularly important when producing components destined for assembly or further finishing processes. Practical integration into series production and changeover As an indexable insert, this design allows rapid indexing and minimal setup time, supporting lean production routines and straightforward inventory management. The DCGT11T308-FM2 WSM01 offers predictable wear progression, which simplifies tool life monitoring and replacement scheduling. For workshops aiming to increase throughput without sacrificing quality, the combination of grade and geometry supports aggressive yet controlled machining strategies, reducing downtime and increasing first‑pass yield. Contact Metav Werkzeuge for application recommendations on Walter Tools Tiger‑tec Silver inserts and to secure delivery or stock information Technical Data SKU: DCGT11T308-FM2-WSM01-WALTER Designation: DCGT11T308-FM2 WSM01 Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger‑tec Silver Core data Insert size: 11 Relief angle: 7° Corner radius: 0.8 mm Thickness: T3 Tolerance class: G Special features Grade: WSM01 (coated carbide) Chipbreaker: FM2 Insert form: Rhombus 55° Material suitability: rostfreier Stahl; heat‑resistant superalloys and titanium Geometry highlights: 0.8 mm corner radius; robust edge for interrupted cuts FAQ Which materials are best suited to this insert? The DCGT11T308-FM2 WSM01 is intended for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), with the WSM01 grade optimised for secure chip formation in these materials. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker improves chip control and evacuation, which stabilises cutting forces and supports a more consistent surface finish when using the DCGT11T308-FM2 WSM01 insert. Can this insert be used for finishing passes? Yes; the insert’s geometry and the 0.8 mm corner radius allow controlled finishing in many turning operations, provided cutting data are adjusted to the workpiece and machine conditions. What advantage does the Tiger‑tec Silver series provide? Tiger‑tec Silver provides a combination of coating technology and substrate design that enhances wear resistance and edge stability, enabling higher productivity on demanding materials with the DCGT11T308-FM2 WSM01. Is the insert suitable for interrupted cuts? The insert’s robust geometry, including the 0.8 mm corner radius and T3 thickness, increases resistance to chipping and makes it appropriate for operations with moderate interruptions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and Walter Tools. The offered item is original, brand‑new merchandise from the manufacturer.
DCGT11T308-FM2 WSM10S WSM10S Wendeplatten - Walter Tools
The combination of a wear-resistant Tiger·tec Silver grade and a specialised FM2 chipbreaker delivers stable cutting edges and reliable chip control for hard-to-machine alloys; order the DCGT11T308-FM2 WSM10S turning insert directly via Metav Werkzeuge or ask our consultants if needed. DCGT11T308-FM2 WSM10S – Turning insert, Tiger·tec Silver, 7° relief, Walter Tools The DCGT11T308-FM2 WSM10S is a rhombic 55° turning insert engineered for reliable machining of rostfreier Stahl and heat‑resistant superalloys in demanding turning operations. Tiger·tec Silver coating for long edge life Optimised chipbreaker FM2 for secure chip control Rhombic 55° shape with 0.8 mm corner radius Maximised process reliability for demanding materials The Tiger·tec Silver series provides a combination of coating technology and substrate properties that increase thermal resistance and reduce flank wear when machining stainless steels and superalloys. This grade supports a stable cutting edge, which means fewer edge failures under the high cutting temperatures typical for these materials. By prioritising thermal and mechanical load resistance, the insert contributes to more predictable cycle times and reduced scrap rates in serial production. For workshop planners this translates into higher process security and less unscheduled tool changeover. Consistent chip control and predictable surface finish The integrated FM2 chipbreaker is designed to produce short, controllable chips even under interrupted cuts and high contact temperatures. The rhombic 55° geometry with a 7° clearance and a 0.8 mm corner radius creates a robust cutting line that balances strength and accessibility for finishing passes. The result is a consistent surface finish with repeatable dimensional behaviour; operators benefit from fewer built-up-edge occurrences and easier handling of swarf. The DCGT11T308-FM2 WSM10S is particularly suited where secure chip evacuation and stable cutting forces are required. Long tool life and efficient handling in production With a plate thickness of T3 and a standard size 11, the design supports multiple indexations before regrinding or disposal, reducing downtime for replacements. The tolerance class G ensures interchangeability across standard toolholders that accept this ISO designation. Applying an appropriate cutting data sheet for the workpiece material and using the Tiger·tec Silver insert helps extend run‑times and lowers the frequency of tool inventory turnovers. From an operational perspective, fewer tool changes and predictable tool life contribute directly to improved throughput and lower process interruptions. For applications requiring reliable machining of rostfreier Stahl and heat‑resistant alloys, contact Metav Werkzeuge to request the DCGT11T308-FM2 WSM10S from Walter Tools or speak with our technical consultants at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: DCGT11T308-FM2-WSM10S-WALTER SKU: DCGT11T308-FM2-WSM10S-WALTER Facts Size: 11 Thickness: T3 Relief angle: 7° Corner radius: 0.8 mm Tolerance class: G Special features Series: Tiger·tec Silver Grade: WSM10S (coated carbide) Chipbreaker: FM2 Shape: Rhombic 55° Material suitability: stainless steels (M), heat‑resistant superalloys / titanium (S) Application focus: hard‑to‑machine materials and selected stainless steel geometries FAQ What materials is this insert suitable for? The DCGT11T308-FM2 WSM10S from Walter Tools is designed for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), providing thermal resistance and edge stability for these materials. How does the FM2 chipbreaker improve machining? The FM2 chipbreaker on this insert promotes secure chip formation and short chips under heavy thermal loads, which enhances swarf control and supports repeatable surface finish when turning challenging alloys. What are the key geometric advantages of the rhombic 55° form? The rhombic 55° geometry offers versatility for a range of turning operations, combining access for medium‑depth cuts with a robust cutting edge; the 0.8 mm corner radius increases edge strength for tougher feeds. How many indexations can be expected before replacement? With a T3 plate thickness and size 11 format the insert supports multiple indexations; actual indexation count depends on cutting conditions and material, but the Tiger·tec Silver grade is formulated to extend usable edge life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanatory purposes only. The offered item is original, new factory merchandise of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com