DCGW11T308TS-2 WBK20 Wendeplatten - Walter Tools
Take advantage of the combination of the CBN cutting grade WBK20, the Rhombus 55° geometry and a 0.8 mm corner radius to extend tool life and keep cutting performance stable in high‑wear turning operations; order or request tailored application advice via Metav Werkzeuge or ask for consultation. DCGW11T308TS-2 WBK20 — Indexable turning insert, CBN grade, Rhombus 55° (Walter Tools) The DCGW11T308TS-2 WBK20 is an indexable turning insert designed for wear‑resistant, hardened‑material machining in demanding production environments. CBN grade WBK20 for high wear resistance Rhombus 55° form for versatile turning 7° clearance for reliable cutting geometry 0.8 mm corner radius for stable edge strength Longer tool life for hard and high‑wear materials The CBN composition of the WBK20 grade is engineered for high wear resistance in applications where conventional carbides reach their limits. As a superabrasive solution, CBN maintains a sharp, stable cutting edge under elevated temperatures and abrasive contact, which translates into longer tool life and fewer insert changes. This makes the insert especially suitable for hardened steels and other wear‑intensive materials; the specific applicability should be verified against the manufacturer’s product matrix to match the grade to the exact workpiece material. Predictable surface finish and robust cutting geometry The Rhombus 55° form combined with a 7° clearance and a 0.8 mm corner radius provides a balanced compromise between edge strength and surface finish. The 55° approach angle supports versatile turning—from light finishing cuts to more aggressive profile turning—while the 0.8 mm radius increases edge stability for interrupted cuts and hard spots. These geometry choices enable consistent dimensional control and help reduce rework by producing predictable results even in long production runs. Stable chip control and integration into turning systems With a defined chipbreaker 2 and tolerance class G, the insert supports steady chip formation and repeatable seating in the toolholder. The T3 thickness and size 11 format suit compact turning tool assemblies where secure clamping and minimal overhang are required. The combination of chip control and dimensional tolerances promotes process reliability, which is essential for efficient batch production and reduced machine downtime. For optimal outcomes, match the insert’s grade and geometry to the cutting parameters and holder system used in each setup. For application guidance on the Walter Tools DCGW11T308TS-2 WBK20 insert or to confirm suitability for a specific hardened‑steel task, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and technical consultation Technical data Article number: DCGW11T308TS-2-WBK20-WALTER Label: Drehwendeschneidplatte DCGW11T308TS-2 WBK20 Walter Tools Manufacturer: Walter Tools Grade/Series: WBK20 — Walter Schneidstoffsorte - Serie offen Facts Clearance angle: 7° Corner radius: 0.8 mm Chipbreaker: 2 Tolerance class: G Form angle: 55° Plate size: 11 Thickness: T3 Special features CBN cutting grade for high‑wear machining Designed for hardened steels and wear‑intensive tasks (check product matrix) Rhombus 55° insert form Stable edge geometry for interrupted cutting Series: Walter Schneidstoffsorte - Serie offen FAQ What materials is this CBN insert suited for? The DCGW11T308TS-2 WBK20 insert is intended primarily for hardened steels and other high‑wear materials; suitability for a specific workpiece should be checked against the Walter Tools product matrix. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength and helps maintain surface finish during interrupted cuts, improving the insert’s resistance to chipping under heavy or variable loads. Can this insert be used for finishing passes? Yes—the Rhombus 55° geometry and defined clearance angle permit finishing and semi‑finishing operations when cutting parameters are adapted to the material and toolholder setup. Is the insert compatible with standard turning holders? The DCGW11T308TS-2 WBK20 follows common indexable insert dimensions and a T3 thickness; compatibility depends on the clamping system and seat design—verify holder specifications before use. What is the role of the chipbreaker marked as 2? Chipbreaker 2 is configured to promote controlled chip segmentation and evacuation in turning operations, supporting stability and reducing the risk of built‑up edge in long runs. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Marked brand names are used for explanatory purposes only; there is no affiliation between our company and the brands mentioned. The offered article is an original, factory‑new product from the manufacturer.
DCLNL124B-P Nicht zutreffend P Wendeplatten - Walter Tools
Benefit from precise chip control and straightforward indexability with the Walter Tools DCLNL124B-P indexable turning insert featuring a P chipbreaker. Combine reliable chip formation and easy integration into standard toolholders for consistent turning performance. Order directly via Metav Werkzeuge or consult our technical advisers for application matching. DCLNL124B-P indexable turning insert — P chipbreaker, Walter Tools The DCLNL124B-P is an indexable turning insert intended for metal turning operations, offering controlled chip evacuation through its P chipbreaker for stable machining in general turning applications Indexable turning insert DCLNL124B-P P chipbreaker for consistent chip control Designed for general turning applications Precision chip control for steady production The P chipbreaker is designed to deliver consistent chip control, reducing the risk of irregular chips that interrupt machining cycles. By promoting predictable chip formation, the insert supports stable machining and helps maintain surface quality during continuous turning processes. This geometry is particularly useful where uninterrupted production and predictable tool behaviour are priorities, as it aids in avoiding unexpected stoppages and maintaining throughput. Indexable design that integrates with standard tooling As an indexable insert, the component allows multiple cutting edges to be used before replacement, which contributes to a cost-effective tooling strategy and reduces downtime for tool changes. The insert is suitable for common clamping systems and standard toolholders, so integration into existing turning setups is straightforward. The design supports efficient edge rotation and reuse, which helps contain tooling costs without compromising process continuity. Reliable edge performance and application guidance The geometry aims to provide a repeatable edge during indexed rotations, supporting predictable performance across serial turning tasks. While catalogue details for the sort and series are not specified, the insert’s classification as a turning grade with a P chipbreaker indicates a focus on controlled chip formation and general-purpose turning. Technical advice and specification matching are available through Metav Werkzeuge should further application-specific data be required. Contact Metav Werkzeuge for tailored specification support or order requests for Walter Tools inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: DCLNL124B-P--WALTER Designation: DCLNL124B-P Product type: Drehwendeschneidplatte (indexable turning insert) Brand: Walter Tools Facts No numerical data specified in the supplied fields Special features Chipbreaker: P ISO designation: DCLNL124B-P Series: Not applicable Sort/series description: No clear description in supplied catalogues FAQ What materials is this insert suitable for? The DCLNL124B-P insert is specified as a general-purpose turning grade; exact material approvals are not listed in the supplied data and should be confirmed with Metav Werkzeuge for specific alloys. How does the P chipbreaker affect machining? The P chipbreaker on the DCLNL124B-P promotes controlled chip formation, improving chip evacuation and contributing to steadier cutting conditions during turning operations. Can this insert be reused by indexing edges? Yes, as an indexable turning insert the DCLNL124B-P is intended for edge rotation to extend usable life before replacement, supporting economical tool usage. Is there a specific series or coating information available? No definitive series or coating details are provided in the supplied catalogue information for this item; consult Metav Werkzeuge for any available manufacturer specifications. Which toolholders are compatible with this insert? The insert is designed for standard turning assemblies; compatibility depends on the chosen toolholder geometry and clamping system — toolholder matching should be verified prior to ordering. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, factory-new merchandise of the manufacturer.
DCLNL164D-P DCLNL164D-P P Wendeplatten - Walter Tools
Take advantage of a robust combination of precise chip control and dependable edge stability to maintain consistent turning performance. The chipbreaker P geometry and industrial-grade manufacturing ensure repeatable results in production environments; order directly via Metav Werkzeuge or consult the team for application-specific guidance. DCLNL164D-P indexable turning insert, chipbreaker P — Walter Tools The DCLNL164D-P is an indexable turning insert designed for general turning applications where consistent chip formation and reliable edge stability are required. Stable cutting edge with P chipbreaker Designed for repeatable industrial turning Walter Tools manufacturing quality Consistent chip control for productive turning The P-type chipbreaker delivers controlled chips and predictable evacuation, which reduces downtime related to chip management and secondary cleaning steps. The design of this insert supports steady cutting conditions, improving process stability in batch production or continuous turning work. By focusing on chip behaviour rather than a single metric, the insert helps to maintain a consistent machining rhythm and reduces the frequency of tool interventions, enhancing overall throughput. Edge stability that supports longer tool life A stable cutting geometry reduces micro-chipping and flank wear, which in turn maintains surface finish and dimensional integrity over longer cycles. The combination of a precise insert form and accurate seat engagement contributes to uniform cutting forces and lower vibration. For operations where repeatability is critical, this results in fewer part reworks and a more predictable tool-change schedule, supporting leaner machining processes and reduced production variability. Versatile application where catalogue details are limited Although the provided catalogue information does not specify a detailed grade or recommended materials, the insert’s designation and chipbreaker indicate a purpose-built solution for common turning tasks in metalworking. The available data notes that there is no clear detailed description in the supplied catalogues; therefore, selection should be aligned with the intended cutting conditions and holder compatibility. When matched correctly to the toolholder and process, the insert contributes to robust cutting performance across standard turning operations. Practical handling and integration into existing tooling The ISO-style designation facilitates matching with compatible turning toolholders; correct seating and secure clamping are essential to exploit the insert’s geometry fully. When installed in a standard insert pocket designed for this form factor, the part helps to maintain consistent cutting angles and repeatable mounting, which is important for serial production. Proper tool set-up and adherence to recommended cutting parameters will convert the insert’s engineered features into measurable gains in productivity and surface quality. For application advice and availability of the Walter Tools DCLNL164D-P indexable turning insert, contact Metav Werkzeuge for tailored recommendations and delivery options Technical Data Article number: DCLNL164D-P--WALTER Label: Drehwendeschneidplatte DCLNL164D-P Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert ISO designation: DCLNL164D-P Chipbreaker: P Series: Nicht zutreffend Numbers / Core technical data No numerical specifications provided in the supplied data Special features / Versions Chipbreaker P for controlled chip formation Series and grade: no clear detailed description in provided catalogues Intended use: turning/indexable insert applications Manufacturer information appears in the product data FAQ What is the primary purpose of this insert? The DCLNL164D-P indexable turning insert by Walter Tools is intended for turning operations where controlled chip formation and stable cutting behaviour are priorities. Is the suitable material range specified? The supplied product data for the DCLNL164D-P does not include explicit material recommendations; selection should be based on matching the insert geometry and chipbreaker to the intended workpiece material. How does the chipbreaker P affect machining? The chipbreaker P geometry promotes predictable chip segmentation and evacuation, which helps to reduce interruptions and maintain a steady machining process. Can the insert be used in existing toolholders? Compatibility depends on the toolholder accepting the ISO-style designation; the insert’s form allows integration with holders designed for this family, ensuring consistent seat engagement and repeatable mounting. Are detailed grade and coating data available? No detailed grade or coating specifications were included in the provided dataset for the DCLNL164D-P; refer to available catalogue information or technical sheets for specific grade and coating details when provided. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names remain the property of their respective owners. Mention of brand names and registered trademarks is for explanation only and does not imply any affiliation with or endorsement by the trademark holders. The offered article is an original, factory-new product of the respective manufacturer.
DCLNL165D-P DCLNL165D-P P Wendeplatten - Walter Tools
Take advantage of precise chip control and workshop compatibility combined with Walter Tools' manufacturing reliability to keep turning operations predictable and productive. Order the insert directly via Metav Werkzeuge or request tailored advice from our consultants if needed. DCLNL165D-P — Indexable turning insert with P chipbreaker, Walter Tools A DCLNL165D-P indexable turning insert designed for stable chip formation and versatile general turning applications in metalworking. P chipbreaker for consistent chip control Stable edge geometry for reliable cutting Fits common turning toolholders Walter Tools manufacturing quality Improved process stability through controlled chip formation The insert's defining characteristic is the chipbreaker P, which promotes stable chip formation and reduces the risk of chip-related interruptions. Stable chips contribute to fewer stoppages and a more consistent surface finish, which in turn supports higher throughput and less rework. For production environments where predictable cycle times matter, this insert helps maintain an efficient machining rhythm while lowering the probability of unexpected tool changes. Faster set-up and integration into existing turning systems The DCLNL165D-P designation denotes a standardised geometry that simplifies tool selection and replacement. Thanks to its indexable design, the component permits quick indexing or replacement of cutting edges without complex regrinding, helping to reduce machine downtime. The geometry supports secure mounting in compatible holders, assisting workshops in preserving alignment and minimising setup time between jobs. Predictable performance backed by a reputable brand Manufactured under the Walter Tools portfolio, the insert benefits from established industrial standards for production tooling. This association emphasises process reliability and consistent edge behaviour across batches, which is important for repeatable results in serial production. Selecting tooling with recognised provenance supports long-term planning and contributes to reliable machining economics by reducing variability in tool life and part quality. For application-specific advice on the Walter Tools DCLNL165D-P, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored tooling recommendations and prompt availability Technical data SKU: DCLNL165D-P--WALTER Label: Drehwendeschneidplatte DCLNL165D-P Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Core data ISO designation: DCLNL165D-P Series: Nicht zutreffend Internal identifier: DCLNL165D-P Special features Chipbreaker: P Series note: For this grade no detailed description is available in the provided catalogues Application focus: general turning operations FAQ What is the primary function of this insert? The DCLNL165D-P indexable turning insert from Walter Tools is intended to provide reliable chip control and stable cutting performance for general turning tasks. Which chipbreaker does this insert use and why does it matter? The insert uses the P chipbreaker; this design supports consistent chip formation, which helps maintain process stability and reduces interruptions during turning. Can the insert be indexed or replaced easily? As an indexable insert, the DCLNL165D-P allows for quick indexing of cutting edges or replacement, supporting efficient tool maintenance and reduced machine downtime. Is there detailed material or coating information available for this SKU? No detailed coating or material grade is provided in the supplied data for DCLNL165D-P; catalogue notes state that no clear grade description is available for this series. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned here for clarification only. There is no connection between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
DCLNL2020X12-P Nicht zutreffend N Wendeplatten - Walter Tools
Take advantage of the combination of reliable geometry, precise tolerance class and controlled chip formation for consistent turning results; order the DCLNL2020X12-P indexable turning insert directly via Metav Werkzeuge or consult our advisors for application support. DCLNL2020X12-P — indexable turning insert, Rhombus 55°, 7° clearance — Walter Tools DCLNL2020X12-P is an indexable turning insert engineered for general turning tasks where predictable chip control and repeatable tolerances are required. Rhombus 55° geometry for universal turning 7° clearance for stable cutting performance P chipbreaker for predictable chip control L tolerance class and 02 thickness for consistency Consistent productivity through geometry and tolerance The rhombic 55° geometry provides a versatile cutting edge that suits a wide range of turning operations, allowing efficient material removal without frequent tool changes. Combined with the L tolerance class, this geometry delivers repeatable seating accuracy in tool holders, which reduces set-up time and minimises process variation. The result is a measurable improvement in cycle-time stability and fewer interruptions in production, supporting a smoother workflow on the shop floor. Predictable chip management and cutting behaviour Equipped with a P chipbreaker, this insert promotes controlled chip formation across common steels and mixed materials. The moderate rake and the 7° clearance angle help maintain a stable cutting force and reduce the risk of edge build-up, which is particularly important during medium-duty turning. Clear chip segmentation assists in evacuation from the cut, lowering the chance of surface damage and decreasing secondary cleaning operations. This design choice translates into higher effective productivity and consistent surface finishes. Practical integration and application guidance The insert’s L2 size and 02 thickness make it compatible with standard turning tool bodies that accept rhombic 55° inserts, ensuring straightforward integration into existing tooling systems. The designation DCLNL2020X12-P indicates a neutral execution suitable for general turning applications; when pairing the insert with appropriate grades and cutting parameters, the result is a reliable compromise between productivity and tool life. For operators unfamiliar with the specific grade pairing, selecting machining parameters that favour stability—moderate feeds and controlled speeds—typically yields best initial results. For recommendations on adapting the DCLNL2020X12-P to a specific application or to request compatible toolholders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct technical guidance. Technical data Article number: DCLNL2020X12-P--WALTER Manufacturer: Walter Tools Product type: Indexable turning insert Facts Geometry: Rhombus 55° Clearance angle: 7° Size: L2 Thickness: 02 Chipbreaker: P Tolerance class: L Execution: N Special features Neutral execution for general turning Predictable chip control with P chipbreaker Repeatable seating due to L tolerance class FAQ What materials is this insert suitable for? This insert is designed for general turning tasks and, when combined with a matched grade, provides controlled chip formation for a range of common materials; selection of the correct cutting grade is recommended for specific alloys. How does the 7° clearance angle affect performance? A 7° clearance angle provides a balance between edge strength and reduced flank contact, which helps to maintain stable cutting forces and consistent surface finish during medium-duty turning. Which toolholders accept this rhombus 55° insert? Toolholders designed for rhombic 55° indexable inserts in an L2 size accommodate this product; ensure the holder matches the insert thickness 02 and tolerance class L for best seating accuracy. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new goods from the manufacturer.
DCLNL2525X12-P L Nicht zutreffend Wendeplatten - Walter Tools
Take advantage of a compact combination of reliable cutting geometry and consistent interchangeability to keep production steady; the 7° relief and Rhombus 55° profile provide predictable chip control and stable edge life. Order the insert directly via Metav Werkzeuge or consult the team for application advice. DCLNL2525X12-P indexable turning insert — Walter Tools, Rhombus 55° / 7° relief The DCLNL2525X12-P is an indexable turning insert designed for general turning tasks where controlled chip formation and repeatable seating are required, suitable for industrial metalcutting where consistent process behaviour is a priority. Rhombus 55° profile for versatile turning 7° relief angle for predictable cutting geometry Chipbreaker P for controlled chip formation Tolerance class L for consistent interchangeability Predictable geometry that stabilises the cutting process The rhombic 55° geometry combined with a 7° relief angle ensures a stable approach to the workpiece and reduces unexpected tool behaviour during engagement. This specific geometry promotes a reliable cut path, which in practice translates to fewer interrupted cycles and more consistent part tolerances. The chipbreaker P helps shape chips into manageable fragments, reducing the risk of entanglement and improving cycle reliability. These design choices result in a measurable improvement in process stability for repetitive turning operations. Built for repeatable seating and dependable edge life Tolerance class L and the precise ISO designation provide predictable seating and repeatability when inserts are indexed or replaced. The insert’s consistent flank and rake geometry contribute to steady wear rates, enabling longer periods between tool changes and predictable maintenance planning. Walter Tools’ engineering focus on stable cutting edges supports operational uptime and helps to maintain a consistent surface finish across batches, which is particularly valuable for production environments seeking reproducible outcomes. Practical interchangeability and catalog clarity for procurement The ISO designation DCLNL2525X12-P and plate thickness value support straightforward procurement and tool inventory management. The entry-level series note indicates that detailed sort descriptions are not available in the supplied catalogues, so the simple, standardised designation aids selection and stock control. Where chip control and seating precision matter, this insert offers a clear specification that integrates into existing tool systems that accept DCLNL-style indexable turning inserts, reducing planning complexity and simplifying tooling lists. Contact Metav Werkzeuge for tailored application guidance on Walter Tools inserts — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for specific cutting data and compatibility advice Technical data SKU: DCLNL2525X12-P--WALTER Designation: DCLNL2525X12-P Manufacturer: Walter Tools Product type: indexable turning insert Execution: N Facts Relief angle: 7° Plate form: Rhombus 55° Plate size: L2 Plate thickness: 52 Tolerance class: L Special features Chipbreaker: P Series: Not applicable ISO designation: DCLNL2525X12-P Sort and series notes: No clear detail available in provided catalogues UID: DCLNL2525X12-P--WALTER FAQ What materials is this insert suited to? The DCLNL2525X12-P insert is intended for general turning applications; material suitability depends on the selected grade and coating — check the tool grade for compatibility with specific workpiece materials. How does the chipbreaker P affect machining? The chipbreaker P is designed to promote controlled chip formation for safer evacuation and reduced risk of chip entanglement when machining medium to continuous cuts with the DCLNL style insert. Is seating repeatability ensured when replacing inserts? Yes — the tolerance class L supports consistent seating and interchangeability, aiding repeatable tool offsets and predictable part quality after indexation or replacement. Can this insert be used in standard DCLNL toolholders? The insert follows the DCLNL ISO designation and is intended for holders designed for that insert style; verify holder compatibility with the DCLNL25×25×12 format before use. Where to find more detailed grade and coating information? Specific grade and coating details are provided by the manufacturer or vendor catalogues; consult Walter Tools documentation or Metav Werkzeuge for exact grade recommendations for the intended application. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
DCLNL2525X16-P Nicht zutreffend N Wendeplatten Walter Tools
Reliable machining with a stable cutting edge and defined clearance geometry ensures consistent turning performance; the DCLNL2525X16-P combines a Rhombus 55° profile, 7° clearance angle and a robust chipbreaker for controlled swarf evacuation. Order the DCLNL2525X16-P directly via Metav Werkzeuge or ask the consultants if additional technical data is required. DCLNL2525X16-P indexable turning insert by Walter Tools — Rhombus 55° with 7° clearance DCLNL2525X16-P is an indexable turning insert designed for versatile external turning tasks where a rhombic geometry and reliable chip control are required Rhombus 55° geometry for versatile turning 7° clearance angle for smooth chip flow Chipbreaker P for controlled chip formation Tolerance class L and robust plate thickness Higher stability and predictable chip control for efficient turning The rhombic profile and the integrated chipbreaker P give this indexable insert consistent chip formation and evacuation, which reduces interruptions and tool-change frequency. The small 7° clearance angle assists in reducing rubbing on the flank face while maintaining a secure engagement angle for a wide range of turning operations. For shops aiming to improve process uptime, these geometry choices contribute to a more predictable machining cycle and simplified set-up, especially where repeatable surface quality is expected. Precision fit and dimensional consistency that support repeatability Built to tolerance class L, the insert offers dimensional consistency that helps to maintain stable tool offsets and repeatable part accuracy across multiple indexing cycles. The designation L2 size and plate thickness 52 increase rigidity at the cutting edge, which helps to resist deflection under typical cutting forces. Such features shorten downtime for recalibration and support higher first-pass yields when combined with adequate toolholder selection and machining parameters. Practical integration, handling advantages and brand reliability As an indexable solution, the insert enables quick indexing and cost-efficient edge renewal without replacing the entire tool, improving tool-life economics. The DCLNL2525X16-P’s geometry is compatible with standard toolholder systems designed for this insert family, facilitating straightforward integration into existing turning setups. Walter Tools, as part of an established toolmaking tradition, underpins the product with industry-recognised quality and consistent manufacturing standards, which supports reliable everyday performance on the shop floor. For tailored machining advice on the Walter Tools DCLNL2525X16-P and recommendations for toolholders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — technical consultation is available to align tool choice with specific production needs Technical data Article number: DCLNL2525X16-P--WALTER Label: Drehwendeschneidplatte DCLNL2525X16-P Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Dimensions & core data Clearance angle: 7° Plate thickness: 52 Tolerance class: L Plate size: L2 Design & features Plate form: Rhombus 55° Chipbreaker: P Series: Nicht zutreffend ISO designation: DCLNL2525X16-P Notes: Serie: Nicht zutreffend; Sorten- und Serienbeschreibung: Für diese Sorte liegt in den bereitgestellten Katalogen keine eindeutige Detailbeschreibung vor FAQ What kinds of turning tasks suit this insert best? The DCLNL2525X16-P is intended for external turning operations where a Rhombus 55° insert geometry and controlled chip formation are required; it performs well in general turning applications that benefit from the specified clearance and chipbreaker design. How does the chipbreaker P improve machining reliability? The chipbreaker P controls chip shape and direction, reducing the risk of entanglement and improving evacuation; this leads to fewer interruptions and steadier surface quality when using the DCLNL2525X16-P. What does tolerance class L mean in practice? Tolerance class L indicates a level of dimensional precision that supports repeatable seating and consistent offsets during indexing; this helps maintain part accuracy across multiple insert changes. Can the insert be indexed to a fresh cutting edge? Yes, the DCLNL2525X16-P is an indexable turning insert designed for multiple-edge use, allowing quick rotation to a new edge and reducing overall tooling cost compared with single-edge tools. What is the ISO designation for this insert? The ISO designation given for this item is DCLNL2525X16-P, which identifies its geometry and family for matching compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for descriptive purposes only and do not imply any affiliation between our company and the trademark holders. The offered item is an original, brand-new product from Walter Tools.
DCLNL3232X16-P Nicht zutreffend N Wendeplatten - Walter Tools
Take advantage of the profile's precise geometry and defined chipbreaker to achieve consistent turning results; the combination of a 55° rhombic form, 7° clearance and L tolerance supports predictable tool life and stable machining. Order directly via Metav Werkzeuge or consult our team for application-specific advice. DCLNL3232X16-P indexable turning insert — Rhombus 55°, 7° clearance — Walter Tools A DCLNL3232X16-P indexable turning insert designed for external turning with a 55° rhombic form and a 7° clearance angle for stable cutting performance Rhombic 55° geometry 7° clearance angle L3 size, 23 mm thickness Chipbreaker type P Consistent geometry for repeatable production The combination of a rhombic 55° profile and a 7° clearance creates a balanced contact geometry that supports steady cutting forces and predictable wear patterns. With the tolerance class L specified, the insert delivers dimensional consistency across tool changes, which simplifies tool offsets and reduces setup iterations on the shop floor. This geometry is particularly valuable in serial turning where repeatability and short set-up times translate directly into reduced cycle costs and higher process stability. Chip control and surface quality with a defined chipbreaker Equipped with chipbreaker P, the insert is designed to influence chip formation for more controllable evacuation and improved surface condition. For operators less familiar with chipbreaker nomenclature: a chipbreaker is an engineered groove or contour on the rake face that alters chip flow, reducing entanglement and helping to avoid irregular marks on the workpiece. Better chip control can also reduce manual intervention at the machine, supporting uninterrupted production and a cleaner work environment. Practical installation, dimensions and application hints The insert is supplied in an L3 dimension with a 23 mm thickness, dimensions that match common turning holders for external operations. The execution code N and the ISO designation provide compatibility cues for selecting the correct clamping system and seat geometry. The DCLNL form indicates a negative rhombic insert suited to versatile turning tasks; when paired with an appropriate toolholder, this indexable insert supports efficient tool indexing and economical use of cutting edges. For material-specific recommendations or to confirm holder compatibility, consult Metav Werkzeuge’s application advice to ensure optimal cutting data and secure clamping. For tailored advice on integrating Walter Tools inserts into production, contact Metav Werkzeuge for application support and procurement: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: DCLNL3232X16-P--WALTER ISO designation: DCLNL3232X16-P Product type: Drehwendeschneidplatte / indexable turning insert Manufacturer: Walter Tools Core specifications Clearance angle: 7° Plate form: Rhombus 55° Plate size: L3 Plate thickness: 23 mm Tolerance class: L Chipbreaker: P Design & notes Execution: N Series: Not applicable Sort/series note: No clear detailed description in the provided catalogues FAQ What does the 55° rhombic shape mean for cutting tasks? The rhombic 55° outline offers a versatile cutting edge orientation that balances approach angle and edge strength; the DCLNL3232X16-P insert provides this geometry to support stable external turning. How does the chipbreaker P affect chip behaviour? Chipbreaker P is designed to influence chip curl and breakup, improving evacuation and reducing re-cutting; the DCLNL3232X16-P insert therefore helps maintain a consistent surface finish and safer chip handling. Which dimensions should be checked to ensure holder compatibility? Confirm the L3 size and the 23 mm thickness against the toolholder seat; these primary dimensions determine correct seating and secure clamping for the indexable insert. What does tolerance class L indicate for the insert? Tolerance class L signifies defined dimensional tolerances for the insert, supporting repeatable indexing and predictable tool offsets during production. Is the DCLNL3232X16-P suitable for automated tool changes? Yes, the insert’s standard ISO form and tolerance class make it compatible with automated indexing cycles when used with a matched WC toolholder and clamping system. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
DCLNR124B-P Nicht zutreffend P Wendeplatten - Walter Tools
Take advantage of the reliable chip control and consistent performance of a Walter Tools indexable insert; its P chipbreaker promotes predictable chip formation and improved surface quality while minimising unplanned downtime. Order the insert directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. DCLNR124B-P indexable turning insert with P chipbreaker — Walter Tools The DCLNR124B-P is an indexable turning insert designed for controlled chip formation in a wide range of turning tasks, offering stable cutting behaviour and straightforward integration into standard turning setups. Indexable turning insert DCLNR124B-P by Walter Tools P chipbreaker for consistent chip formation Reliable manufacturing quality from a leading toolmaker Stable chip control for improved surface quality and cycle times The insert’s P chipbreaker is engineered to promote short, controlled chips under typical turning conditions, which reduces the risk of entangling chips and supports steady machine cycles. By delivering consistent chip forms, the insert helps to sustain a clean cutting zone, which in turn contributes to improved surface quality and fewer interruptions for chip removal. For production environments where repeatability matters, the predictable behaviour of the chip former supports tighter process windows and more consistent end results. Designed for repeatable performance and efficient tool management As an indexable turning insert, this product enables quick corner changes and minimal set-up effort, reducing non-productive time at the toolpost. The geometry and manufacture focus on repeatable performance, giving stable cutting characteristics over multiple indexings. In practice, this translates into fewer adjustments, reduced inspection frequency and better utilisation of machine hours. The conservative approach to insert design emphasises durability and steady cutting action rather than speculative performance claims. Practical handling and workflow advantages in the workshop The insert integrates into established turning workflows with minimal adaptation. Its standardised form factor allows it to be fitted quickly, and the consistent chip behaviour simplifies downstream tasks such as chip disposal and coolant optimisation. For production planners, the result is easier scheduling and more predictable throughput. When process questions arise, Metav Werkzeuge can provide guidance to align cutting data and holder selection with the intended application for optimum results. Brand assurance and sensible application guidance Produced under the Walter Tools label, a recognised name in precision metalcutting, the insert benefits from the manufacturer’s experience in producing tools for demanding environments. The focus is on dependable tool performance rather than on exaggerated claims, supporting long-term process stability and responsible use of cutting resources. Where catalogue details are limited, the supplied designation and chipbreaker type offer a reliable starting point for selecting the correct grade and coating from Walter Tools’ portfolio. Contact Metav Werkzeuge for tailored recommendations on the DCLNR124B-P and to discuss suitable holder solutions and availability — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number / SKU: DCLNR124B-P--WALTER Designation: DCLNR124B-P Product type: Indexable turning insert Brand: Walter Tools Facts Series: Not applicable Chipbreaker: P ISO designation: DCLNR124B-P Special features Indexable turning insert for turning applications P chipbreaker for controlled chip formation No detailed series description available in the supplied catalogues FAQ What is the DCLNR124B-P primarily used for? The DCLNR124B-P is an indexable turning insert from Walter Tools intended for turning operations where controlled chip formation is required. What benefit does the P chipbreaker provide? The P chipbreaker on the DCLNR124B-P promotes short, consistent chips, helping to maintain a clean cutting zone and stable cutting conditions. Can the insert be re-indexed to extend service life? The DCLNR124B-P is designed as an indexable insert, allowing corners to be rotated or exchanged to extend usable life and reduce downtime. How should the insert be selected for a given turning task? Selection of the DCLNR124B-P should be based on the workpiece material, cutting conditions and holder compatibility; technical details from Walter Tools or Metav Werkzeuge assist in the final choice. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, for Walter Tools Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes and do not indicate any affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
DCLNR164D-P Nicht zutreffend P Wendeplatten - Walter Tools
The combination of a recognised ISO designation and a dedicated P chipbreaker ensures consistent chip control and reliable cutting performance in routine turning tasks; the insert’s robust design supports stable production and predictable tool life. Order the DCLNR164D-P directly via Metav Werkzeuge or ask our consultants if needed. DCLNR164D-P Walter Tools turning indexable insert, P chipbreaker The DCLNR164D-P is a turning indexable insert intended for external turning applications where consistent chip formation and repeatable edge performance are required. ISO designation DCLNR164D-P P chipbreaker for controlled chips Walter Tools quality engineering Indexable geometry for secure clamping Consistent chip control for steady production A decisive advantage of this insert is its P chipbreaker, engineered to promote predictable chip formation during turning operations. Stable chip removal reduces the risk of entanglement and allows uninterrupted machining sequences, which in turn supports higher component throughput and fewer unplanned stops. By focusing on chip behaviour rather than only on cutting speeds, the insert helps maintain surface integrity and minimises secondary operations, delivering a tangible productivity benefit to machining processes. Clear integration into existing tool systems The ISO designation offers immediate orientation for toolroom planning and procurement: the DCLNR164D-P indexable insert fits standard toolholders designed for this geometry and can be referenced directly in tool lists and CAM setups. The standardised form factor simplifies stock management and replacement procedures, so setup times are reduced and operator handling becomes more predictable. Where process reproducibility is paramount, such clarity in specification supports reliable cycle times and easy interchangeability. Practical benefits that support machining quality Manufactured under the Walter Tools portfolio, the insert combines a geometry optimised for external turning with a focus on repeatable cutting performance. The result is improved surface finish consistency and a reduction in scrap rates; these outcomes help to lower overall production cost per part through fewer reworks. The robust cutting edge also provides resistance to the small variations encountered in everyday shop-floor conditions, translating into dependable performance across batch runs. Handling and application guidance for efficient use Use of an indexable insert like this one streamlines maintenance: a worn edge can be rotated or replaced without regrinding, which keeps machine downtimes to a minimum. For best results, select the holder that matches the DCLNR geometry and verify clamping torque to ensure a stable tool-to-holder interface. Although detailed coating and grade data are not available here, the insert’s ISO designation and chipbreaker classification permit straightforward selection within established process parameters and workpiece material groupings. Contact Metav Werkzeuge for tailored application advice or to request the Walter Tools DCLNR164D-P turning insert and ensure optimal integration into production Technical data Article number: DCLNR164D-P--WALTER Type: Turning indexable insert Designation: DCLNR164D-P Manufacturer: Walter Tools Core data Chipbreaker: P Series: Not applicable ISO designation: DCLNR164D-P Special features Indexable insert geometry DCLNR164D-P Series information: no detailed catalogue description available Original Walter Tools article FAQ What materials is this insert suitable for? The DCLNR164D-P turning insert from Walter Tools is specified by ISO geometry and a P chipbreaker; suitability depends on workpiece material and cutting parameters, so selection should follow standard material-group guidelines. How does the P chipbreaker influence machining? The P chipbreaker promotes controlled chip formation and evacuation during external turning, reducing the risk of chip-related interruptions and supporting stable surface quality. Can the insert be used in standard holders? Yes; the insert’s ISO designation allows it to be mounted in compatible standard toolholders for the DCLNR geometry, simplifying replacement and inventory management. Is this an original Walter Tools article? The SKU corresponds to an original Walter Tools indexable insert manufactured to the supplier’s production standards and delivered as a factory-new article. Where to get application advice for integrating this insert? Metav Werkzeuge provides application support and can advise on the best holder, cutting data and process steps for the DCLNR164D-P insert to match specific machining needs. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter AG (marketed as Walter Tools) is part of the Sandvik Group and is one of the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and brand names mentioned are the property of their respective owners and are used here solely for explanation; there is no affiliation between our company and the named brands.
DCLNR165D-P DCLNR165D-P P Wendeplatten - Walter Tools
The combination of ISO identification DCLNR165D-P, a dedicated chipbreaker P and Walter Tools' manufacturing consistency ensures stable chip control and predictable turning performance; order the insert directly via Metav Werkzeuge or request advice from our technical consultants. DCLNR165D-P turning indexable insert (chipbreaker P) by Walter Tools The DCLNR165D-P is an indexable turning insert intended for conventional external turning tasks, offering a standard fit for DCLNR-style toolholders and a chipbreaker designed to support controlled swarf formation. DCLNR165D-P indexable turning insert Chipbreaker type P for reliable chip control Compatible with DCLNR-style toolholders Walter Tools manufacturing quality Stable chip control for consistent turning results The engineered chipbreaker P improves swarf formation and evacuation, which contributes directly to process stability during external turning operations. By promoting predictable chip shapes and reducing entanglement, the insert lowers the risk of surface damage and tool interference. For workshops prioritising uptime, a controlled chip flow reduces interruptions for cleaning and rework, supporting a more continuous production rhythm and fewer unplanned stops. Straightforward integration into standard tool systems Designed to match DCLNR-style clamping systems, this indexable insert simplifies tool set-up and replacement in established turning workflows. The standardised geometry allows quick seating and indexing in appropriate holders, reducing changeover time and enabling faster reconditioning of cutting edges. Clear labelling with the ISO designation aids inventory management and ensures the correct insert is selected for holders specified for the DCLNR form. Reliable brand pedigree and predictable performance Produced under the Walter Tools portfolio, the insert benefits from consistent manufacturing practices that aim to deliver repeatable performance and stable cutting edges. The focus on dependable production quality helps maintain part tolerances and surface finish expectations across batches, which is especially relevant in serial production and contract machining where reproducibility matters. This consistency supports efficient process planning and reduces variability in finished components. For tailored advice on integrating Walter Tools turning inserts or to request availability details, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific recommendations Technical Data Article number: DCLNR165D-P--WALTER Label: Drehwendeschneidplatte DCLNR165D-P Walter Tools Product type: Drehwendeschneidplatte / turning indexable insert Manufacturer: Walter Tools Facts No numerical core data provided Special features ISO designation: DCLNR165D-P Chipbreaker: P Series: Not applicable Intended use: external turning Compatibility: DCLNR-style toolholders Brand: Walter Tools FAQ What applications is this insert suitable for? The DCLNR165D-P from Walter Tools is intended for external turning operations and is compatible with DCLNR-style toolholders, offering controlled chip formation due to the chipbreaker P. What benefits does the chipbreaker P provide? The chipbreaker P promotes consistent chip shapes and improved evacuation, which helps to maintain surface quality and reduces interruptions during turning with the DCLNR165D-P insert. Which toolholders accept this insert? This indexable insert fits DCLNR-style turning toolholders; when paired with the correct clamping assembly, the DCLNR165D-P ensures correct seating and quick indexing. Is this an original Walter Tools product and suitable for industrial use? Yes, the DCLNR165D-P is offered as an original Walter Tools turning insert and is manufactured to support reliable, repeatable machining performance in industrial turning applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
DCLNR2020X12-P L DCLNR2020X12-P Wendeplatten - Walter Tools
Reliable production results and consistent tool life are achieved by the combination of Rhombus 55° geometry, a 7° clearance, and the P-type chipbreaker; order the DCLNR2020X12-P turning insert directly via Metav Werkzeuge or consult their advisors if required. DCLNR2020X12-P Drehwendeschneidplatte — Rhombus 55°, 7° clearance, Walter Tools The DCLNR2020X12-P is a rhombic 55° indexable turning insert intended for external turning applications, combining a 7° clearance with a P-style chipbreaker for controlled chip formation Rhombus 55° geometry for versatile turning 7° clearance angle for reliable chip flow P-type chipbreaker for controlled chips ISO designation DCLNR2020X12-P Increased efficiency through geometry and chip control The combination of a Rhombus 55° cutting geometry and a P-type chipbreaker delivers a predictable cutting behaviour that supports efficient cycle times and reduced rework. The geometry allows stable cutting engagement across a range of turning operations, while the chipbreaker is designed to promote short, controllable chips that improve evacuation and reduce interruptions. These technical features contribute to consistent tool life and repeatable results in production environments where stability and throughput are priorities. Precise clearance and repeatable mounting A 7° clearance reduces flank contact and helps maintain the cutting edge under varied cutting conditions, supporting surface finish and dimensional stability. The insert is supplied in the ISO designation DCLNR2020X12-P, with a nominal plate size R2 and thickness 02, and a tolerance class of L for standardised interchangeability. This combination simplifies tool set-up and repeatable seating in compatible turning holders, making the insert suitable for routine workshop use where set-up time and repeatability matter. Practical benefits for workshop workflows The insert’s rhombic form and clearance angle enable versatile use across common external turning tasks, while the P-type chipbreaker assists in controlled chip formation and evacuation, reducing machine downtime caused by chip entanglement. The design therefore supports leaner workflows: fewer interruptions, clearer chip control, and less manual clearing. For operations aiming to improve effective cutting time and maintain steady output, the insert’s features translate directly into operational gains. Reliability backed by a recognised tool brand Manufactured under the Walter Tools umbrella, the insert benefits from the brand’s focus on precision and stable cutting performance. The construction and geometry reflect established production standards intended for repeatable machining processes; this provides confidence in routine handling and predictable performance. When consistency and a dependable cutting edge are required, the insert presents a balanced option within Walter Tools’ range of indexable turning solutions. For a technical consultation or to secure stock of this Walter Tools turning insert, contact Metav Werkzeuge for guidance and ordering assistance via info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge can advise on holder compatibility and application details. Technical data SKU: DCLNR2020X12-P--WALTER Article designation: DCLNR2020X12-P Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Clearance angle: 7° Plate form: Rhombus 55° Plate size: R2 Thickness: 02 Tolerance class: L Special features Chipbreaker: P Series: Nicht zutreffend Execution: N ISO designation: DCLNR2020X12-P FAQ What turning applications suit this insert best? The DCLNR2020X12-P indexable turning insert is intended for external turning operations where a rhombic 55° geometry and a P-type chipbreaker provide stable cutting and controlled chips. How does the P-type chipbreaker affect machining? The P-type chipbreaker of the DCLNR2020X12-P promotes short, manageable chips and supports uninterrupted machining, improving process reliability for routine turning tasks. What does the tolerance class L indicate for this insert? Tolerance class L denotes the standardised dimensional tolerance applied to the insert, helping ensure repeatable seating and alignment when used with compatible turning holders. Is the insert suitable for automated production lines? Yes, the DCLNR2020X12-P’s geometry and chip control characteristics are designed to support consistent cutting and reduced interruptions, making it suitable for automated turning operations where predictable performance is required. Which manufacturer produces this insert and what is their reputation? The insert is supplied under the Walter Tools name; the Walter brand is recognised for precision cutting solutions and offers products designed for stable cutting performance and reliable tool life. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DCLNR2525X12-P Nicht zutreffend N Wendeplatten - Walter Tools
Take advantage of the combination of precise 7° clearance angle, Rhombus 55° geometry and the reliable fit of tolerance class L for consistent turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DCLNR2525X12-P indexable turning insert (Rhombus 55°, 7°) by Walter Tools DCLNR2525X12-P is an indexable turning insert engineered for external turning tasks, offering a Rhombus 55° cutting form and a 7° clearance angle for controlled engagement and predictable chip flow. Rhombus 55° insert geometry 7° clearance angle for external turning ISO designation DCLNR2525X12-P Tolerance class L for consistent fit Geometry that delivers predictable cutting forces and surface finish The combination of a Rhombus 55° profile with a 7° clearance angle produces a stable cutting geometry that reduces radial load and improves surface regularity during external turning. The oblique nose angle helps to distribute cutting forces, which limits vibration and supports a consistent finish. In production environments where cycle time and repeatability matter, the geometry provides a tangible advantage by making tool behaviour more predictable across batches. Process stability through controlled chip formation and repeatable fit Equipped with a designated chipbreaker P, this insert promotes controlled chip formation and evacuation, reducing interruptions at the machine. The specified tolerance class L ensures a reproducible seating position in compatible toolholders, which translates into lower setup variation and faster index changes. Together these attributes support higher uptime and make the component suitable for environments prioritising throughput and steady component quality. Practical handling and straightforward integration into tool systems The standardised ISO designation DCLNR2525X12-P simplifies procurement and replacement logistics: the insert fits established clamping systems that accept this format, enabling quick swaps without additional adjustments. With an indicated plate size R2 and plate thickness 52, handling and storage are effortless, while identification during inventory checks remains clear and unambiguous. The insert’s execution marked as N corresponds to the specified manufacturing variant used by the supplier. Guidance for selection and shop-floor benefits When choosing an indexable insert for turning operations, prioritise geometry and fit to the intended cutting strategy: the Rhombus 55° form is suited to controlled external cuts where a balance between strength and accessibility is required. Opting for a component with a clear chip management solution and a reliable tolerance class reduces scrap risk and setup time, yielding cost advantages over long production runs. For customers seeking consistency rather than experimental gains, this specification focuses on steady, reproducible performance. For reliable external turning with Walter Tools' DCLNR2525X12-P insert, contact Metav Werkzeuge for application guidance and stock information via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DCLNR2525X12-P--WALTER Product type: indexable turning insert Manufacturer: Walter Tools ISO designation: DCLNR2525X12-P Facts Clearance angle: 7° Plate thickness: 52 Plate form: Rhombus 55° Plate size: R2 Special features Chipbreaker: P Tolerance class: L Series: Nicht zutreffend Execution: N Product: Drehwendeschneidplatte FAQ What operations is this insert designed for? This indexable turning insert is designed primarily for external turning operations where a Rhombus 55° geometry and a 7° clearance angle provide a controlled cutting engagement and consistent surface results. How is chip control achieved with this insert? Chip control is managed by the integrated chipbreaker P, which encourages short, controlled chips and supports reliable evacuation during continuous turning cycles. Will the insert fit standard holders with the DCLNR format? Yes, the DCLNR2525X12-P follows standard ISO designation conventions for this insert family and is intended to seat correctly in compatible DCLNR-style toolholders with the corresponding tolerance class. What does tolerance class L mean for production? Tolerance class L indicates a consistent seating accuracy that reduces variability between indexing operations, supporting repeatable tool geometry and reduced setup effort across production batches. Is there any series or grade information available for this variant? The series field for this variant is noted as "Nicht zutreffend"; further grade or coating specifics are not supplied in the provided data. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen belongs to the group of leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product descriptions are mentioned solely for explanation. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
DCLNR2525X16-P Nicht zutreffend N Wendeplatten - Walter Tools
Take advantage of the combination of robust geometry, consistent tolerance class and reliable chip control for steady turning performance; order the insert via Metav Werkzeuge or consult the team for application matching. DCLNR2525X16-P Drehwendeschneidplatte – Rhombus 55°, 7° clearance, Walter Tools DCLNR2525X16-P is an indexable turning insert intended for general external turning applications, featuring a rhombic 55° geometry and a 7° clearance for stable tool engagement Rhombus 55° geometry for versatile turning 7° clearance for reduced rubbing and heat Chipbreaker P for consistent chip control Geometry that delivers repeatable external turning results The rhombic 55° geometry of this indexable insert provides a balanced cutting angle suitable for a range of external turning operations. The moderate approach angle allows for both profiling and light shoulder work while keeping cutting forces within predictable limits. With tolerance class L, the component positioning and repeatability are maintained, supporting stable setups and predictable batch production. This geometry reduces vibration risk during intermittent cuts and helps maintain surface finish consistency across series workpieces. Chip control and clearance engineered for process stability Equipped with a chipbreaker P, the insert promotes controlled chip formation and evacuation under typical turning conditions. The incorporated 7° clearance minimises flank contact and reduces frictional heating, which together contribute to longer edge life and fewer built-up edge issues. These design choices support continuous machining cycles and make the insert suitable for shops that prioritise steady cycle times and reduced rework. The carbide seat and cutting edge concept deliver reliable engagement even under varying feed conditions. Shop-floor practicality and integration into toolholders The insert’s designation and size (R2) align with common toolholder systems, facilitating quick exchange and straightforward inventory management. A plate thickness value of 52 and the standardised shape ensure secure clamping and consistent cutting height when combined with matched carriers. The execution code N and the clear ISO-style marking help with fast identification during tool changeovers, reducing downtime. Overall, the component supports efficient change routines and predictable machining outcomes in production environments. Contact Metav Werkzeuge for availability, technical matching and application advice on the Walter Tools DCLNR2525X16-P turning insert — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: DCLNR2525X16-P--WALTER Label: Drehwendeschneidplatte DCLNR2525X16-P Walter Tools Manufacturer: Walter Tools Numbers / Core technical data Clearance angle: 7° Plate form: Rhombus 55° Plate size: R2 Plate thickness: 52 Tolerance class: L Special features Chipbreaker type: P Execution: N Series: Nicht zutreffend FAQ What operations is this insert suited for? The DCLNR2525X16-P turning insert from Walter Tools is designed primarily for external turning operations where a rhombic 55° geometry and controlled chip formation are required. How does the 7° clearance affect machining? A 7° clearance on the insert reduces flank rubbing and friction, helping to maintain tool life and surface quality during extended turning cycles with the Walter Tools insert. What does the chipbreaker designation 'P' indicate for process behaviour? The chipbreaker P on this insert promotes predictable chip formation and evacuation, which supports stable cutting conditions and reduces the likelihood of chip-related interruptions in production. Is the insert compatible with standard toolholders? The R2 plate size and standard rhombic form ensure compatibility with common indexable turning toolholders designed for this geometry and size designation. How does tolerance class L influence setup accuracy? Tolerance class L contributes to consistent seat fit and repeatable positioning during insert changes, enhancing setup reliability and batch-to-batch consistency. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCLNR3232X16-P Nicht zutreffend N Wendeplatten - Walter Tools
Benefit from the combination of precise geometry and robust build for consistent turning results: the Rhombus 55° form and the 7° relief angle deliver predictable cutting conditions while the substantial plate thickness supports long tool life; order via Metav Werkzeuge or consult our specialists for application advice. DCLNR3232X16-P – Turning insert, Rhombus 55°, 7° relief angle (Walter Tools) The DCLNR3232X16-P is a Rhombus 55° indexable turning insert designed for general turning applications where stable chip control and process reliability are required. Rhombus 55° geometry 7° relief angle Corner radius R3 Plate thickness 23 Precise geometry for predictable machining results The Rhombus 55° cutting geometry provides a balance between accessibility and strength, making the insert suitable for a range of turning operations. The defined 7° relief angle reduces flank contact and helps maintain cutting-edge stability under load, which results in more consistent surface finish and repeatable tool life. The chipbreaker designation P supports efficient chip formation in common turning tasks, improving swarf control and reducing the risk of built-up edge. These combined characteristics support higher process reliability and make the insert a pragmatic choice for production-oriented workshops seeking measurable improvements in cycle consistency. Robust design that enhances process stability With a substantial plate thickness of 23 and a corner radius R3, the insert resists deformation and vibration during heavy or interrupted cuts, which translates into longer intervals between index changes and fewer unplanned tool adjustments. The tolerance class L ensures consistent seating and indexing across pockets, allowing predictable positioning and straightforward repeatability in multi-shift production. The construction therefore supports economic machining by lowering downtime and contributing to stable cycle times, making this insert a sound option where machine uptime and consistent part quality are priorities. Compatibility and predictable integration into tool systems Identified as an indexable turning insert with the designation DCLNR3232X16-P, the component is dimensioned for standard toolholders that accept Rhombus 55° inserts and is engineered for simple replacement and reliable clamping. The clear ISO-style designation helps maintenance teams match inserts to holders quickly and reduces set-up ambiguity. Given the tooling geometry and chip control, the insert integrates well into mixed production environments where repeatability and fast changeovers are required. For operations using established tool systems, this insert offers a pragmatic path to improved cycle stability without extensive requalification. For tailored procurement or application support for Walter Tools inserts such as the DCLNR3232X16-P, contact Metav Werkzeuge for specialist advice and order coordination via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DCLNR3232X16-P--WALTER Manufacturer: Walter Tools Product type: Drehwendeschneidplatte SKU: DCLNR3232X16-P--WALTER Core specifications Relief angle: 7° Plate form: Rhombus 55° Plate size / corner radius: R3 Plate thickness: 23 Tolerance class: L Special features Chipbreaker: P Series: Nicht zutreffend ISO designation: DCLNR3232X16-P Wendeplatte designation: DCLNR3232X16-P FAQ What cutting tasks is this insert suited for? The DCLNR3232X16-P turning insert is configured for general turning operations where stable chip control and repeatable results are required; its Rhombus 55° form and chipbreaker P make it well matched to typical steel turning tasks. How does the 7° relief angle affect performance? A 7° relief angle reduces flank wear and minimises rubbing against the workpiece, improving surface consistency and extending the useful life of the cutting edge in the DCLNR3232X16-P insert. What does the chipbreaker designation P indicate? The chipbreaker marked P on the insert refers to its chip control characteristics suited to common turning materials and machining conditions, supporting reliable swarf formation and evacuation. How does tolerance class L influence replacement and setup? Tolerance class L ensures consistent seat fit and indexing accuracy when replacing inserts, which simplifies tool changes and helps maintain reproducible machining parameters across repeated setups. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT070202-FM4 WMP20G FM4 Wendeplatten - Walter Tools
Benefit from the combination of a high-performance Tiger·tec Gold grade and the FM4 chipformer for secure chip control when machining stainless steel; the 7° clearance and 0.2 mm corner radius add reliable edge life and consistent surface finish. Order the insert directly via Metav Werkzeuge or consult the technical advisors for process parameters. DCMT070202-FM4 WMP20G — Rhombic 55° indexable turning insert, 7° clearance (Walter Tools) The DCMT070202-FM4 WMP20G is a rhombic 55° indexable turning insert engineered for dependable machining of stainless steels under medium to robust cutting conditions. Tiger·tec Gold coating for wear resistance FM4 chipformer for stable chip control 7° clearance angle for secure cutting geometry Designed for stainless steel machining Improved productivity through advanced coating and chip control The combination of the Tiger·tec Gold series and the WMP20G grade delivers enhanced wear resistance and consistent cutting-edge performance. The applied coating reduces the tendency for built-up edge when working with stainless steel, so the machining process remains stable over longer tool life. The integrated FM4 chipformer supports predictable chip formation, lowering the risk of irregular chips that can interrupt spindle speeds or spoil surface quality. This leads to fewer tool changes and improved cycle-time efficiency for batch production. Consistent geometry for accurate finishes and repeatability A carefully chosen geometry—rhombic 55° form with a 0.2 mm corner radius and 7° clearance—balances cutting strength with fine edge control. The small corner radius helps maintain dimensional accuracy on profiles and shoulders, while the clearance angle reduces rubbing and heat buildup, supporting a better surface finish on turned components. The insert size and thickness provide rigidity in the holder, which translates to repeatable results in serial turning operations and reduced rework. Process security and integration into standard tool systems Manufactured by Walter Tools, this insert is designed for straightforward integration into conventional turning toolholders and tooling systems. The coated carbide substrate supports medium to robust machining strategies typical for ISO group M materials, promoting stable cutting edges and predictable wear patterns. Proven grade characteristics reduce process variation and help maintain high machine utilisation; where specific parameter optimisation is required, tooling data sheets and application guidance can be referenced to match feeds and speeds to material hardness and component geometry. Choose the Walter Tools Tiger·tec Gold grade for reliable stainless steel turning — contact Metav Werkzeuge for application advice and procurement: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: DCMT070202-FM4-WMP20G-WALTER SKU: DCMT070202-FM4-WMP20G-WALTER Product: Drehwendeschneidplatte / indexable turning insert Manufacturer: Walter Tools ISO designation: DCMT070202-FM4 WMP20G Grade: WMP20G Core data Clearance angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 55° Plate size: 07 Plate thickness: 02 Tolerance class: M Special features Series: Tiger·tec Gold Chipformer: FM4 Suitable for: stainless steel (ISO M) Execution: T FAQ Which materials is this insert suitable for? The DCMT070202-FM4 WMP20G by Walter Tools is engineered primarily for stainless steel (ISO group M), providing stable chip control and resistance to built-up edge. What benefits does the Tiger·tec Gold coating offer? The Tiger·tec Gold coating increases wear resistance and thermal stability, which helps extend edge life and maintain consistent cutting performance on challenging alloys. How does the FM4 chipformer affect machining? The FM4 chipformer promotes controlled chip breakage and evacuation, reducing the risk of chip accumulation and enabling uninterrupted turning cycles. Is the geometry suitable for fine finishing as well as robust cuts? Yes, the rhombic 55° shape with a 0.2 mm corner radius and 7° clearance provides a balance between strength and precision, making it suitable for both finishing and more robust turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (marketed under the brand Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Trademarks and trade names are the property of their respective owners. Protected brand names and product designations are mentioned solely for explanation; there is no commercial affiliation implied and the offered item is an original, factory-new product of the manufacturer.
DCMT070202-FM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WSM01 grade and the FM4 chipbreaker for reliable machining of rostfreier Stahl and high‑temperature alloys; order directly via Metav Werkzeuge or consult our technical team for process optimisation. DCMT070202-FM4 WSM01 indexable turning insert — Tiger‑tec Silver, FM4 chipbreaker (Walter Tools) A DCMT070202-FM4 WSM01 indexable turning insert designed for secure chip control and stable cutting when machining rostfreier Stahl and heat‑resistant superalloys in demanding production environments Tiger‑tec Silver coating for heat resistance WSM01 grade for rostfreier Stahl and superalloys FM4 chipbreaker for consistent chip control Rhombic 55° geometry for versatile turning High process reliability through optimised chip control The combination of the FM4 chipbreaker and the coated carbide grade provides measurable improvements in chip formation and evacuation when machining materials that tend to form long, stringy chips. This results in fewer interruptions for manual chip clearing and a steadier tool‑to‑workpiece interaction, which in turn supports higher process reliability and repeatable cycle times. The insert’s geometry also minimises the risk of built‑up edge when working with tough alloys, helping maintain surface quality and tool life. Designed for heat resistance and edge stability The Tiger‑tec Silver series coating is formulated to resist thermal loading and maintain edge integrity under elevated cutting temperatures. For applications in the M and S ISO material groups — especially rostfreier Stahl and heat‑resistant superalloys or titanium alloys — the coating and substrate pairing reduces flank wear and preserves the cutting edge. The result is fewer insert changes, predictable tool performance and improved uptime in serial production or jobbing environments. Geometry and specification tailored for versatile turning With a rhombic 55° form and a clearance angle of 7°, the insert enables a broad range of turning operations from profiling to light roughing. The 0.2 mm corner radius offers a compromise between strength and edge sharpness, supporting acceptable surface finishes without sacrificing edge robustness. These geometric choices make the insert suitable for general turning tasks where both dimensional control and surface integrity are required. Process guidance and application recommendations For safe and efficient cutting, pair the insert with appropriate positive or neutral toolholders matched to the rhombic form and cutter size. Select cutting parameters with a focus on moderating heat input — using the coating’s thermal resistance allows for stable cuts but proper coolant or controlled cutting speeds help maximise tool life. The graded substrate and chipbreaker combination is intended for operators seeking reproducible results on rostfreier Stahl and high‑temperature alloys in both single‑pass and multi‑pass strategies. Contact Metav Werkzeuge for tailored cutting data and ordering of Walter Tools Tiger‑tec Silver inserts; our specialists advise on turning parameters and toolholder selection Technical data Article number: DCMT070202-FM4-WSM01-WALTER Designation: DCMT070202-FM4 WSM01 Series: Tiger‑tec Silver Manufacturer: Walter Tools Tolerance class: M Numerical data Clearance angle: 7° Corner radius: 0.2 mm Insert size code: 07 Insert thickness code: 02 Special features Coating: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: FM4 Geometry: Rhombic 55° Material suitability: M (rostfreier Stahl), S (superalloys / titanium) Execution code: T FAQ What materials is this insert suitable for? The DCMT070202-FM4 WSM01 insert from Walter Tools is suitable for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), where heat resistance and stable chip formation are required. How does the FM4 chipbreaker improve machining? The FM4 chipbreaker on the DCMT070202-FM4 WSM01 promotes predictable chip breaking and evacuation, reducing interruptions and improving process repeatability during turning operations. Which geometry should the toolholder match? Use a toolholder compatible with a rhombic 55° insert form and the DCMT size code to ensure correct seating and support for the WSM01 grade and FM4 chipbreaker. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT070202-FM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, stable chip control and precise edge geometry to secure consistent turning performance on demanding materials; order the insert directly via Metav Werkzeuge or contact our advisers for detailed process support. DCMT070202-FM4 WSM10S – Turning insert, Tiger‑tec Silver coating, for stainless steels and superalloys | Walter Tools A DCMT070202-FM4 WSM10S turning insert designed for heavy-duty machining of rostfreiem Stahl (stainless steels) and heat‑resistant superalloys, offering stable cutting edges and reliable chip control Tiger‑tec Silver wear‑resistant coating Optimised FM4 chipbreaker for controlled chips Suitable for stainless steels and superalloys Rhombic 55° form with 0.2 mm corner radius Increased process stability through coating and grade The DCMT070202-FM4 WSM10S is built on coated carbide technology from the Tiger‑tec Silver family, a design that prioritises thermal resistance and edge stability in continuous and interrupted cuts. The chemical and physical properties of this coating reduce adhesion and thermal degradation on high‑temperature materials, which leads to fewer edge failures and longer tool life. In practice, this means more predictable machining cycles and reduced downtime due to insert changes, improving overall plant throughput. Precise geometry for repeatable surface quality A rhombic 55° insert form combined with a 0.2 mm corner radius and an effective FM4 chipbreaker delivers stable cutting conditions and consistent surface finish in longitudinal and profile turning. The geometry promotes favourable chip formation and evacuation, lowering the risk of built‑up edge when machining tough alloys. The modest corner radius balances strength and finish, enabling conservative cutting parameters where component tolerances demand repeatability and good surface integrity. Clearances and tolerances that support tight machining windows The insert features a 7° clearance and a tolerance class M, which support accurate seating and repeatable positioning in standard toolholders. These characteristics help maintain consistent overhang and tool‑holder rigidity, reducing vibration and variances in part geometry. For operations where tight dimensional control is essential, the insert’s specifications support stable cut entry and exit behaviour, allowing for predictable process windows in small‑ and medium‑batch production. Material range and application benefits explained Designated for ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium), the grade WSM10S and the FM4 chipbreaker together address the specific challenges of these materials: poor heat conductivity and high strength at temperature. The result is improved chip control and prolonged edge life when machining components such as shafts, housings and high‑temperature fasteners. For workshops aiming to consolidate tool inventories, this insert offers a versatile solution across demanding workpiece families while maintaining cutting performance. Contact Metav Werkzeuge for availability and process recommendations on Walter Tools Tiger‑tec Silver inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DCMT070202-FM4-WSM10S-WALTER Label: Drehwendeschneidplatte DCMT070202-FM4 WSM10S Walter Tools Brand: Walter Tools Facts Clearance angle: 7° Corner radius: 0.2 mm Insert size: 07 Thickness: 02 Form: Rhombus 55° Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WSM10S (coated carbide) Chipbreaker: FM4 Execution: T Material designation: S / M (superalloys/titanium and stainless steels) FAQ What materials is this insert designed for? The insert is suitable for ISO groups M and S; the WSM10S grade targets stainless steels and heat‑resistant superalloys/titanium for demanding turning tasks. How does the FM4 chipbreaker help in practice? The FM4 geometry promotes controlled chip segmentation and evacuation, improving surface quality and reducing the risk of built‑up edge when machining tough materials. Can this insert be used for interrupted cuts? Yes, the combination of Tiger‑tec Silver coating and robust edge geometry provides increased resistance to thermal and mechanical shock, making it appropriate for certain interrupted turning applications. Which holder types are compatible with the rhombic 55° form? Standard toolholders for DCMT‑style rhombic 55° inserts are compatible; the insert’s 7° clearance and tolerance class M support precise seating in conventional turning tool systems. Is this an original Walter Tools product? The item is offered as an original factory‑new Walter Tools insert; specifications and grade details correspond to the Walter product line. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand‑new merchandise of the manufacturer.
DCMT070202-FM4 WSM20S FM4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the FM4 chipbreaker for improved heat resistance, controlled chip formation and longer edge life; suitable for machining stainless steel and heat-resistant superalloys. Order the DCMT070202-FM4 WSM20S directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. DCMT070202-FM4 WSM20S turning insert — Tiger·tec Silver, FM4 chipbreaker (Walter Tools) A DCMT070202-FM4 WSM20S indexable turning insert designed for reliable performance when machining stainless steel and high-temperature alloys in demanding turning operations Tiger·tec Silver for thermal stability Suitable for stainless steel and superalloys Rhombic 55° geometry for stable cutting 0.2 mm corner radius for fine surface finish High thermal resistance for consistent metal removal The Tiger·tec Silver coating, combined with the coated carbide grade WSM20S, delivers enhanced heat resistance and wear properties for turning applications. This formulation stabilises the cutting edge under high temperatures and reduces the risk of edge build-up when machining tough materials. For operations involving stainless steel or heat-resistant alloys, the result is improved process reliability and more predictable tool life, which supports steady production cycles and reduced downtime. Geometry and edge definition that improves surface quality The rhombic 55° insert form and the 0.2 mm corner radius provide a balance between strength and finish capability. This geometry promotes a controlled engagement angle that reduces radial cutting forces and helps maintain a consistent surface finish on the workpiece. With a 7° relief angle and medium tolerance class M, the insert is suited to standard turning set-ups where dimensional reliability and repeatable edge performance are required. Chip control and material coverage for efficient machining Equipped with the FM4 chipbreaker, the insert supports secure chip segmentation and evacuation across a range of feeds and depths of cut. The designation S / M indicates suitability for superalloys (S) and stainless steel (M), so the insert covers a broad material spectrum common in aerospace, medical and energy sectors. The robust chip control combined with a stable cutting edge helps to reduce cycle times and increases process productivity while preserving component quality. Contact Metav Werkzeuge for application advice on Walter Tools Tiger·tec Silver inserts and to request tailored recommendations — eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: DCMT070202-FM4-WSM20S-WALTER Designation: DCMT070202-FM4 WSM20S Manufacturer: Walter Tools Product type: Indexable turning insert UID: DCMT070202-FM4-WSM20S-WALTER Core specifications Relief angle: 7° Corner radius: 0.2 mm Insert size: 07 Thickness code: 02 Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: FM4 Geometry: Rhomb 55° Grade / Sorte: WSM20S Material suitability: S / M Execution: T Series: Tiger-tec Silver Application capability: stainless steel machining FAQ What materials is this insert suitable for? The DCMT070202-FM4 WSM20S insert is formulated for stainless steel (M) and heat-resistant superalloys (S), with the Tiger·tec Silver coating supporting thermal stability during heavy-duty turning. How does the FM4 chipbreaker affect performance? The FM4 chipbreaker on the DCMT070202-FM4 WSM20S promotes controlled chip formation and evacuation, improving process security and helping to maintain consistent surface quality in continuous turning operations. What surface finish can be expected with a 0.2 mm corner radius? A 0.2 mm corner radius delivers a fine finish while preserving edge strength; on the DCMT070202-FM4 WSM20S this radius provides a reliable compromise between component quality and insert durability. Is this insert suitable for finishing and semi-finishing operations? Yes. The combination of rhombic 55° geometry and a small corner radius makes the insert versatile for semi-finishing and finishing passes where dimensional control and surface integrity are important. Which series and grade does the insert belong to? The insert is part of the Tiger-tec Silver series and uses the WSM20S coated carbide grade, optimised for tough-to-machine materials and applications requiring stable cutting edges. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original new goods from the manufacturer.
DCMT070202-FM4 WSM30S WSM30S Wendeplatten - Walter Tools
Benefit from high process security and consistent tool life thanks to the Tiger·tec Silver grade and the FM4 chipbreaker; secure chip control and a stable cutting edge reduce downtime and improve surface quality. Order the insert via Metav Werkzeuge or consult our specialists for cutting data and application advice. DCMT070202-FM4 WSM30S – Turning insert for stainless steels and heat‑resistant alloys by Walter Tools A DCMT070202-FM4 WSM30S indexable turning insert engineered for demanding applications in rostfreie Stähle and superalloys, offering stable edges and reliable chip formation Tiger·tec Silver coated grade WSM30S Optimised FM4 chipbreaker for secure chip control Rhombic 55° insert with 0.2 mm corner radius 7° relief and M tolerance for consistent seating High‑performance grade for challenging materials The WSM30S grade from the Tiger·tec Silver family is a coated carbide formulation developed specifically for materials that generate heat and tend to build up on the cutting edge. As a result, the insert supports reliable chip formation and sustained edge stability when turning rostfreie Stähle and heat‑resistant superalloys. This focus on thermal stability reduces the risk of accelerated wear and helps maintain dimensional accuracy across longer tool life, which in turn improves throughput and lowers overall machining costs. Geometry designed for secure cutting and surface quality The rhombic 55° shape combined with a 0.2 mm corner radius and a 7° relief angle provides a balance between entry strength and edge refinement. The FM4 chipbreaker is optimised to control chip flow in sticky, tough materials, preventing entanglement and minimising interruptions. With an M tolerance class for consistent seating, the insert delivers repeatable clamping accuracy and predictable machining behaviour—advantages that translate directly into fewer set‑up adjustments and a more stable production process. Practical efficiency and recommended applications Available in insert size 07 and thickness 02, this indexable insert suits a broad range of turning operations where process reliability matters. The combination of the coated grade and the FM4 geometry is particularly effective for continuous and semi‑continuous machining of rostfreie Stähle (ISO group M) and heat‑resistant superalloys (ISO group S), offering an economic solution for shops that require both performance and tool life. For customers seeking improved surface finish or reduced cycle times, the insert’s chip control and edge stability enable optimised cutting parameters and fewer interruptions for tool changes. For robust performance in stainless steels and superalloys, specify the Walter Tools DCMT070202-FM4 WSM30S insert and contact Metav Werkzeuge for tailored cutting data and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: DCMT070202-FM4-WSM30S-WALTER Label: Drehwendeschneidplatte DCMT070202-FM4 WSM30S Walter Tools Manufacturer: Walter Tools Product type: Turning insert Series: Tiger·tec Silver Numbers / core technical data Relief angle: 7° Corner radius: 0.2 mm Insert shape: Rhombic 55° Insert size: 07 Thickness: 02 Tolerance class: M Designs / special features Coating: Tiger·tec Silver Grade: WSM30S (coated carbide) Chipbreaker: FM4 Material groups: S / M Typical applications: rostfreie Stähle, heat‑resistant superalloys FAQ What materials is this insert suited for? The DCMT070202-FM4 WSM30S insert is designed for rostfreie Stähle (ISO group M) and heat‑resistant superalloys (ISO group S), providing stable cutting edges and reliable chip control in these materials. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on the DCMT070202-FM4 WSM30S promotes controlled chip formation and evacuation, reducing the risk of chip entanglement and improving surface quality in difficult‑to‑machine alloys. What are the key geometry benefits of the insert? The rhombic 55° shape with a 0.2 mm corner radius and 7° relief offers a compromise between cutting edge strength and fine surface finish, while the M tolerance ensures consistent seating in standard toolholders. Can this insert improve cycle times? When paired with optimised cutting data, the WSM30S grade and FM4 geometry can enable higher productive cutting rates and fewer tool changes, contributing to reduced cycle times and increased overall efficiency. Is the insert suitable for finishing operations? Yes, the combination of the grade and the small corner radius supports improved surface finish in finishing passes on rostfreie Stähle and selected superalloys. Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned solely for explanatory purposes and do not imply any affiliation with our company. The offered item is original, factory‑new goods of the manufacturer Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DCMT070202-FP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of precise geometry, WEP10C cermet grade and stable chip control for consistent finishing and increased productivity. Order directly via Metav Werkzeuge or request application guidance from the sales team for reliable tool selection. DCMT070202-FP4 WEP10C — Indexable turning insert, Rhombic 55°, Walter Tools A DCMT070202-FP4 WEP10C indexable turning insert designed for fine finishing and medium-turning applications, supplied as part of the Walter Cermet series to support stable cutting and high-quality surface results. Rhombic 55° geometry for versatile turning FP4 chipbreaker for stable chip formation 0.2 mm corner radius for fine surface finish 7° clearance angle for low cutting forces Consistent surface quality through controlled chip formation The combination of the FP4 chipbreaker with the WEP10C cermet grade yields stable chip formation, which reduces vibration and minimises built-up edge during finishing passes. This results in a more consistent surface finish and fewer rework cycles. The insert’s design is especially beneficial when running long single-pass cuts or when repeatable dimensional accuracy is required; the geometry supports predictable chip flow and easier chip evacuation, helping to maintain cycle-time stability. Geometry optimised for flexible turning and finishing With a Rhombic 55° shape and a 0.2 mm corner radius, the insert balances access to profiles with the ability to produce fine edges. The moderate nose radius supports narrow finishing cuts without sacrificing edge strength, while the 7° clearance angle helps to reduce rubbing on the flank face, lowering cutting forces and heat input. These geometric choices make the insert suitable for both light finishing and medium-duty turning tasks where surface integrity and dimensional control matter. Walter Cermet grade for productive, repeatable performance Part of the Walter Cermet series, this cermet grade is aimed at delivering a mix of wear resistance and edge stability for improved tool life during finishing operations. The WEP10C specification provides a wear-resistant substrate that supports repeatable performance across multiple components, making it a sensible option for serial production where consistency is valued. Users should consult the product matrix for precise workpiece material suitability to match the grade to the intended application. Practical fit and mounting clarity The insert’s standard DCMT format ensures compatibility with a wide range of indexable turning holders and negative clamping systems. The plate designation and dimensions follow established insert codes to simplify replacement and inventory management. The available tolerance class M indicates machining tolerances appropriate for general industrial turning tasks, enabling predictable fits with existing toolholders and cutting assemblies. For application-specific recommendations on Walter Tools cermet inserts and to check stock availability, contact Metav Werkzeuge for tailored selection support and fast supply coordination Technical data Article number: DCMT070202-FP4-WEP10C-WALTER Designation: DCMT070202-FP4 WEP10C Product type: Indexable turning insert Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.2 mm Insert size: 07 Thickness code: 02 Tolerance class: M Special features FP4 chipbreaker Rhombus 55° geometry Cermet grade WEP10C Series: Walter Cermet Execution: T FAQ What materials is this insert intended for? The insert is supplied in the WEP10C cermet grade; material suitability should be verified against the Walter Cermet product matrix for the DCMT070202-FP4 WEP10C to ensure optimal performance for specific alloys. How does the FP4 chipbreaker influence machining? The FP4 chipbreaker promotes stable chip control and reduced vibration during finishing cuts, improving surface quality and reducing the likelihood of built-up edge on the cutting edge. Can the insert be used for finishing stainless steels? The WEP10C grade is a cermet type aimed at finishing applications; users should consult the material compatibility matrix to confirm suitability for particular stainless steel grades and recommended cutting parameters. How does the 0.2 mm corner radius affect tool life and finish? A 0.2 mm corner radius delivers a fine surface finish and low cutting forces for finishing passes; it offers a balanced edge strength suitable for narrow finishing cuts while helping to maintain good tool life in appropriate applications. Is the DCMT070202-FP4 WEP10C compatible with standard DCMT toolholders? Yes, the insert follows the DCMT designation and is compatible with standard DCMT negative clamping toolholders when the holder accepts the same insert geometry and tolerance class. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names mentioned here are the property of their respective owners and are cited for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the respective manufacturer.
DCMT070202-FP4 WKP01G Wendeplatten - Walter Tools
High process stability and consistent surface quality result from the combination of the Tiger·tec Gold grade WKP01G and the optimised FP4 chipbreaker; the 7° clearance and rhombic 55° geometry further support reliable turning of steel and cast iron. Order the insert directly via Metav Werkzeuge or consult their advisors for cutting data and process integration. DCMT070202-FP4 WKP01G indexable turning insert by Walter Tools — Tiger·tec Gold grade, for steel and cast iron DCMT070202-FP4 WKP01G is a Tiger·tec Gold indexable turning insert engineered for productive external turning of steels and cast irons in industrial machining applications Tiger·tec Gold coated grade WKP01G Optimised FP4 chipbreaker geometry 7° clearance for reliable cutting Rhombic 55° insert with 0.2 mm nose radius Higher throughput for steel machining with predictable tool life The combination of the Tiger·tec Gold coating and the WKP01G grade is designed to deliver increased cutting performance when machining steels. Coated carbide technology reduces flank wear and supports higher cutting speeds, which translates into a measurable rise in productivity and a lower cost per part. The focus on thermal and wear resistance enables more consistent tool life, helping to shorten cycle times without compromising component quality. Consistent chip control and surface finish through FP4 geometry The FP4 chipbreaker offers controlled chip formation for typical turning operations, reducing the risk of long, entangling chips and improving evacuation. With a 0.2 mm nose radius the insert produces a fine surface finish at moderate depths of cut while maintaining edge strength for light to medium finishing passes. Clear chip control means fewer process interruptions and a steadier workpiece finish across production batches. Stable cutting conditions from robust geometry and clearance The rhombic 55° shape combined with 7° clearance provides a geometry suitable for versatile external turning tasks, offering a balance between strength and access to the cutting zone. The tolerance class M supports accurate seating in tool holders, reducing runout and vibration. This stability is particularly beneficial in operations where repeatability and dimensional accuracy are required, such as batch production or mixed-series turning. Clear application scope and simple selection for process planning Designed for the ISO material groups P (steel) and K (cast iron), the insert is suitable where those workpiece families present typical chip and heat characteristics defined in machining standards. The DCMT070202-FP4 WKP01G indexable turning insert simplifies tool selection for mixed workshops and production lines, offering a standardised solution that reduces setup complexity and supports predictable machining outcomes. Contact Metav Werkzeuge for tailored cutting data, availability and rapid delivery of Walter Tools Tiger·tec Gold inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DCMT070202-FP4-WKP01G-WALTER Designation: DCMT070202-FP4 WKP01G Product type: indexable turning insert Series: Tiger·tec Gold Grade: WKP01G Core measurements Clearance angle: 7° Nose radius: 0.2 mm Insert form angle: 55° Size code: 07 Thickness code: 02 Tolerance class: M Design & features FP4 chipbreaker Coated carbide technology (Tiger·tec Gold) Material groups: P (steel), K (cast iron) Rhombic 55° insert geometry Suitable for finishing and medium machining operations FAQ Which workpiece materials is this insert suitable for? The DCMT070202-FP4 WKP01G indexable turning insert is specified for ISO groups P and K, meaning it is intended for machining steel and cast iron materials. What advantage does the Tiger·tec Gold grade provide? The Tiger·tec Gold WKP01G grade offers enhanced wear resistance and thermal stability, which supports higher cutting speeds and more consistent tool life in steel and cast-iron turning. How does the FP4 chipbreaker affect process reliability? The FP4 chipbreaker promotes controlled chip formation and evacuation, reducing interruptions caused by poor chip flow and helping to maintain a uniform surface finish. Is the rhombic 55° geometry suitable for general external turning? Yes, the rhombic 55° form provides a good compromise between cutting edge strength and access to the workpiece, making it suitable for a range of external turning tasks. What does tolerance class M mean for mounting? Tolerance class M indicates a medium-sized tolerance for insert dimensions, which supports accurate seating in compatible tool holders and contributes to process stability. The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Mark names are used for explanation only; there is no affiliation with our company. The offered article is original, factory-new goods.
DCMT070202-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of a high-performance grade and optimised chip control to improve cycle times and reduce tooling costs; Walter Tools' Tiger·tec Gold grade combines wear resistance and process stability for efficient steel turning — order via Metav Werkzeuge or consult our specialists for cutting data and availability. DCMT070202-FP4 WPP10G — turning indexable insert, Tiger·tec Gold for steel (Walter Tools) DCMT070202-FP4 WPP10G is a rhombic 55° turning insert with FP4 chipbreaker and Tiger·tec Gold coating, designed specifically for reliable and productive machining of steel (ISO P) in general turning applications Tiger·tec Gold coated for extended tool life FP4 chipbreaker for stable chip control Rhombic 55° geometry for universal turning Optimised for steel machining (ISO P) Productivity gains through advanced coating and grade The combination of the Tiger·tec Gold coating and a WPP10G cutting grade gives this insert a clear advantage in longevity and process reliability. As a coated carbide product, the insert withstands the thermal and mechanical loads typical of steel machining, which reduces tool change frequency and supports longer uninterrupted production runs. The result is improved productivity and lower unit tooling cost, particularly where a balance between wear resistance and toughness is required. This formulation is aimed at universal steel applications according to ISO P, making it suitable for a broad range of turning tasks in jobbing and serial production. Consistent chip control and surface quality Chip management is central to stable turning. The FP4 chipbreaker is engineered to produce controllable chips across a variety of cutting conditions, lowering the risk of recutting and machine downtime. Together with the Rhombus 55° layout and a corner radius of 0.2 mm, the geometry supports good surface finish while maintaining cutting edge strength. The insert’s 7° clearance angle reduces rubbing on the flank face, which helps maintain dimensional accuracy and repeatability. These features combine to make toolpaths more predictable and finishing passes more efficient, particularly when consistent part quality is required. Practical application and setup guidance for steel work This turning insert is specified in size 07 with a plate thickness of 02, matching common toolholder systems for light to medium turning operations. Use the insert for unalloyed and alloyed steels where the material group complies with ISO P classification; its balance of tenacity and wear resistance suits both finishing and semi-finishing tasks. For stable performance, pair the insert with a rigid tooling setup and appropriate cutting parameters adapted to the workpiece alloy and hardness. Where possible, verify initial feeds and speeds on a short test run and adjust coolant or cutting-fluid strategy to optimise chip evacuation and tool life. Contact Metav Werkzeuge for tailored cutting data and to secure Walter Tools Tiger·tec Gold DCMT070202-FP4 WPP10G inserts; eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical data SKU: DCMT070202-FP4-WPP10G-WALTER Designation: DCMT070202-FP4 WPP10G Product type: Drehwendeschneidplatte / turning indexable insert Manufacturer: Walter Tools Facts Corner radius: 0.2 mm Free angle: 7° Plate size: 07 Plate thickness: 02 Geometry: Rhombus 55° Tolerance class: M Special features Chipbreaker: FP4 Grade: WPP10G (Tiger·tec Gold coated carbide) Series: Tiger·tec Gold Application: Steel (ISO P) Execution: T FAQ What materials is this insert suitable for? The DCMT070202-FP4 WPP10G insert from Walter Tools is optimised for steel machining and is specified for the ISO P material group, covering unalloyed and alloyed steels. What does the WPP10G grade indicate? WPP10G is a Walter Tools grade within the Tiger·tec Gold family; it denotes a coated carbide designed to combine wear resistance and toughness for reliable steel turning. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker provides controlled chip formation and evacuation, improving process stability and reducing the likelihood of recutting or machine interruptions when using the DCMT070202-FP4 WPP10G insert. Is the 0.2 mm corner radius suitable for finishing? A 0.2 mm corner radius on this insert supports improved surface finish while retaining sufficient edge strength for light to medium finishing passes on steel components. Which toolholders accept this insert form? The rhombic 55° form and size 07 are compatible with standard toolholders designed for DCMT-style inserts; verify holder compatibility and clamping specifications before assembly. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are used for explanation only. There is no affiliation between our company and the brands named. The offered item is an original, factory-new product of the manufacturer.
DCMT070202-FP4 WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the optimised FP4 chipbreaker for reliable, high-productivity steel turning; the rhombic 55° geometry with a 7° clearance angle supports secure cutting and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult the Metav team for application guidance. Drehwendeschneidplatte DCMT070202-FP4 WPP20G — indexable turning insert, Tiger·tec Gold, for steel (P) — Walter Tools The Drehwendeschneidplatte DCMT070202-FP4 WPP20G is a rhombic 55° indexable insert with Tiger·tec Gold coating, developed for efficient machining of steel in general turning applications. Tiger·tec Gold coated carbide grade Optimised FP4 chipbreaker for stable chips 7° clearance angle for secure cutting 0.2 mm corner radius for fine surface finish Boosted productivity with advanced coating and grade The combination of the Tiger·tec Gold coating and the WPP20G grade is engineered for high process reliability and extended tool life when machining steel. The coated carbide composition provides improved wear resistance and heat management during continuous cuts, which reduces downtime for insert changes and supports higher cutting data. This results in more predictable tool performance and a measurable increase in throughput for batch and serial production. Consistent surface quality and dimensional control The rhombic geometry with a 0.2 mm corner radius and a 7° clearance angle delivers a balance between strength and fine finishing. The FP4 chipbreaker promotes controlled chip formation and stable cutting forces, which helps to maintain consistent component dimensions and surface roughness. For operations where a refined finish and repeatability matter, the geometry and chip control reduce secondary operations and handling time. Optimised for steel according to ISO grouping P Designed specifically for the steel material group (P), the insert handles the typical heat development and chip characteristics of unalloyed and alloyed steels. The substrate and coating combination supports a wide range of cutting conditions, offering reliable edge stability and good surface integrity. This makes the insert suitable for general turning tasks where a universal, robust solution is required. Easy integration and process benefits on the shop floor The insert’s tolerance class M and standard DCMT form ensure compatibility with common toolholders and stable seating during machining. The compact design and straightforward indexing procedure reduce changeover times and simplify inventory management. Combined with the Tiger·tec Gold technology, this contributes to lower overall machining costs through longer tool life and fewer interruptions. For robust, high-performance steel turning, specify the Walter Tools DCMT070202-FP4 WPP20G with Tiger·tec Gold — contact Metav Werkzeuge for tailored cutting data and order support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DCMT070202-FP4-WPP20G-WALTER Article designation: DCMT070202-FP4 WPP20G Manufacturer: Walter Tools Facts Free clearance angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 55° Plate size: 07 Plate thickness: 02 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP20G Chipbreaker: FP4 Execution: T Material group: P (steel) Series: Tiger-tec Gold FAQ Which materials is this insert intended for? The DCMT070202-FP4 WPP20G insert is specified for the material group P, meaning it is intended primarily for machining steel according to ISO grouping P. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP20G grade improves wear resistance and thermal stability, supporting longer tool life and more consistent performance in steel turning operations. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker promotes controlled chip formation and steady cutting forces, which aids in maintaining surface finish and dimensional accuracy during turning. Is the geometry suitable for fine finishing? Yes, the rhombic 55° form combined with the 0.2 mm corner radius provides a good compromise between strength and fine surface finish for general turning tasks. Can this insert be used with standard toolholders? The DCMT070202-FP4 designation follows common indexable insert standards and, together with its tolerance class M, is compatible with typical toolholder systems for turning. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com