DCMT070204-FW4 WSM30S WSM30S Wendeplatten - Walter Tools
Benefit from the combination of Walter Tools' Tiger‑tec Silver WSM30S grade and the FW4 chipbreaker for improved chip control and extended tool life; the rhombic geometry and 0.4 mm corner radius provide stable engagement for machining stainless steels and heat‑resistant superalloys. Order the DCMT070204‑FW4 WSM30S via Metav Werkzeuge or request application advice from their consultants. DCMT070204‑FW4 WSM30S – Indexable turning insert, Tiger‑tec Silver for stainless steels and superalloys (Walter Tools) DCMT070204‑FW4 WSM30S is an indexable turning insert engineered for demanding turning operations on stainless steels and heat‑resistant superalloys, offering reliable edge stability and efficient chip control. Tiger‑tec Silver coating for high wear resistance Optimised FW4 chipbreaker for secure chip control Rhombic 55° DCMT geometry for versatile turning 0.4 mm corner radius with 7° clearance angle Higher productivity through heat‑resistant coating and stable cutting edges The insert's Tiger‑tec Silver coating and the WSM30S substrate work together to resist thermal degradation and abrasive wear when machining tough materials. This results in a more consistent cutting edge over longer cycles and fewer tool changes, which translates directly into higher process throughput. The advanced coating also reduces the tendency for built‑up edge on stainless steels, supporting improved dimensional stability and surface quality in serial production. Safer chip formation reduces interruptions and rework Equipped with the FW4 chipbreaker, the geometry promotes predictable chip formation and evacuation in sticky or heat‑prone materials. Predictable chips minimise risk to the workpiece and the machine, help maintain coolant effectiveness and reduce component cleaning or rework. The practical outcome is less unplanned downtime and a steadier production rhythm for batches that require repeatable surface finish and tolerance control. Geometry designed for flexibility and repeatability The rhombic 55° DCMT shape combined with a 0.4 mm corner radius and 7° clearance angle provides a balance between edge strength and accessibility for a range of turning tasks. The insert format allows multiple indexing positions, offering economical use of each insert while ensuring repeatable seating and cutting behaviour. For workshops processing diverse stainless grades and Ni‑base alloys, this geometry supports both roughing passes with secure edge life and finishing cuts with consistent surface results. Application suitability and process guidance Rated for the ISO material groups M and S, the grade targets stainless steels (M) and heat‑resistant superalloys / titanium (S). Selection of cutting data should favour moderate to elevated speeds with attention to feed and coolant strategy to exploit the coating's heat resistance. Using the DCMT070204‑FW4 WSM30S in well‑matched holder geometries enhances process security and reduces variability across components, delivering economic gains through longer tool life and fewer machine stoppages. Choose Walter Tools' Tiger‑tec Silver DCMT070204‑FW4 WSM30S for improved process security and contact Metav Werkzeuge for tailored application advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: DCMT070204-FW4-WSM30S-WALTER Designation: DCMT070204-FW4 WSM30S Product type: Indexable turning insert (turning insert) Brand: Walter Tools Facts Geometry: Rhombus 55° (DCMT) Corner radius: 0.4 mm Clearance angle: 7° Insert size code: 07 Thickness code: 02 Tolerance class: M Grade / series: WSM30S / Tiger‑tec Silver Special features Coating: Tiger‑tec Silver Chipbreaker: FW4 Material suitability: stainless steels (M), superalloys/titanium (S) Execution code: T Application focus: demanding and heat‑resistant materials FAQ What materials is this insert best suited for? The DCMT070204‑FW4 WSM30S is designed primarily for stainless steels and heat‑resistant superalloys (ISO groups M and S), where the Tiger‑tec Silver grade improves thermal stability and edge life. How does the FW4 chipbreaker benefit production? The FW4 chipbreaker on the DCMT070204‑FW4 promotes predictable chip formation and evacuation, which reduces interruptions and supports a consistent surface finish on challenging materials. Can the insert be used for both roughing and finishing? Yes; the rhombic 55° geometry and a 0.4 mm corner radius make the insert versatile enough for heavier cuts as well as fine finishing passes when correct cutting data are applied. How does the Tiger‑tec Silver coating affect tool life? The Tiger‑tec Silver coating enhances wear resistance and reduces thermal damage to the cutting edge, extending effective tool life in demanding machining of stainless steels and superalloys. What benefits does the DCMT format provide in indexable tooling systems? The DCMT format offers multiple indexable edges per insert, straightforward mounting and repeatable seating, ensuring cost‑efficient use of the insert and stable performance across production runs. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original factory‑new goods from the manufacturer.
DCMT070204-MK4 WKK10S Wendeplatten - Walter Tools
Take advantage of a wear‑resistant Tiger‑tec Silver grade and a proven MK4 chipbreaker to maintain steady productivity when machining cast iron; order directly via Metav Werkzeuge or consult the team for application-specific recommendations. DCMT070204-MK4 WKK10S — Drehwendeschneidplatte for cast iron, Tiger‑tec Silver, Walter Tools DCMT070204-MK4 WKK10S is a rhombic 55° turning insert designed for efficient machining of cast iron components with optimised chip control and robust edge life Tiger‑tec Silver coated grade WKK10S Optimised MK4 chip control Suited for cast iron machining 0.4 mm corner radius for durability High‑productivity cast iron turning with durable coating The Tiger‑tec Silver grade focuses on abrasive‑wear resistance, making it particularly suitable for components produced from cast iron. The specialised coating and substrate combination in this family reduce flank wear under heavy interrupted cuts and abrasive workpiece surfaces. For production environments that demand consistent tool life, the WKK10S grade offers a predictable wear curve, which helps planners estimate insert change intervals and maintain stable cycle times. The result is measurable uptime improvement in medium‑ to high‑volume turning operations. Reliable chip control that stabilises process performance The MK4 chipbreaker is engineered to produce short, breaking chips typical of cast iron machining, lowering the risk of chip entanglement and enabling safer, unattended production runs. Improved chip control reduces rework and minimises machine downtime caused by chip jams. In practical terms, this means smoother handling at the tool‑holder interface and less time spent on manual chip removal, contributing directly to productivity and operator safety. Geometry tuned for precision and edge security The insert’s Rhombus 55° form and 7° clearance deliver a versatile cutting geometry that supports a wide range of turning operations, from profiling to light roughing on cast iron. The 0.4 mm corner radius gives a balance between edge strength and achievable surface finish, while the plate size code 07 and thickness code 02 suit small to medium toolholders requiring compact yet stable inserts. The ISO designation DCMT070204-MK4 WKK10S combines geometry, chipbreaker and grade information in one clear identifier for toolroom selection and inventory control. Walter Tools quality for repeatable results in production As part of a recognised tooling portfolio, these inserts bring product reliability and consistent machining behaviour to the shop floor. The combination of a stable substrate, Tiger‑tec Silver coating and a dedicated chipbreaker supports long tool life and repeatable surface integrity on cast iron workpieces. For engineering teams aiming to reduce process variance and ensure component conformity, this insert provides an economical route to robust turning performance. For tailored recommendations on using the Walter Tools Tiger‑tec Silver insert DCMT070204-MK4 WKK10S for cast iron applications, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss cutting data and tooling packages. Technical data SKU: DCMT070204-MK4-WKK10S-WALTER ISO designation: DCMT070204-MK4 WKK10S Series: Tiger‑tec Silver Grade: WKK10S Chipbreaker: MK4 Manufacturer: Walter Tools Core dimensions Corner radius: 0.4 mm Clearance angle: 7° Insert form: Rhombus 55° Size code: 07 Thickness code: 02 Tolerance class: M Applications & features Coating: Tiger‑tec Silver Material group: Cast iron (K) Optimised for abrasive wear on cast iron Produces short, breaking chips Suitable for stable, productive turning on cast iron parts FAQ What materials is this insert designed for? The DCMT070204-MK4 WKK10S insert is designed primarily for cast iron (K) machining and excels where abrasive wear is a concern. How does the MK4 chipbreaker benefit production? The MK4 chipbreaker on this Walter Tools insert produces short, controllable chips, reducing the risk of chip entanglement and enabling longer unmanned cycles. What does the WKK10S grade offer compared with other grades? WKK10S, as part of the Tiger‑tec Silver family, provides enhanced abrasive‑wear resistance and a robust coating/substrate pairing for consistent tool life on cast iron. Can this insert achieve good surface finishes on cast iron? Yes; the combination of 0.4 mm corner radius and the rhombic geometry supports good surface integrity in finishing and semi‑finishing operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only and do not imply any connection between our company and the mentioned manufacturers. The offered article is original, factory‑new goods from the manufacturer.
DCMT070204-MK4 WKK20S Wendeplatten - Walter Tools
Benefit from a productive combination of Tiger‑tec Silver coating and a robust WKK20S grade: the insert provides stable edge life and reliable chip control for cast iron turning, helping to maintain cycle times and surface quality. Order the DCMT070204-MK4 WKK20S insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT070204-MK4 WKK20S turning insert — Tiger‑tec Silver coating for cast iron | Walter Tools A DCMT070204-MK4 WKK20S turning insert engineered for productive cast iron machining with a rhombic 55° geometry and MK4 chipbreaker. Tiger‑tec Silver coated grade WKK20S Optimised for cast iron (ISO group K) Rhombic 55° shape, 7° clearance angle MK4 chipbreaker for controlled short chips Precision and productivity for cast iron turning The DCMT070204-MK4 WKK20S insert combines a wear‑resistant coated carbide grade with a geometry tailored to cast iron, delivering stable cutting performance and predictable tool life. The WKK20S grade is part of the Tiger‑tec Silver family and is engineered to resist abrasive wear and to cope with the frequently short, breaking chips typical of grey and nodular cast iron. In production environments this translates into fewer tool changes and steadier cycle times, which supports higher throughput and improved process reliability. Coating and edge technology that extend service intervals A key advantage is the Tiger‑tec Silver coating technology applied to the WKK20S grade, which combines thermal and mechanical resistance to slow flank wear and maintain a sharp cutting edge under intermittent cutting conditions. The insert’s MK4 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and improving surface finish. With a 0.4 mm corner radius and 7° clearance angle, the geometry balances strength at the cutting edge with the ability to achieve consistent surface quality on cast iron components. Reliable geometry and process security for production use The rhombic 55° plate form and the specified tolerances (tolerance class M) support repeatable seatings and toolholder interchangeability on turning tool posts. The MK4 chipbreaker is particularly suited to short‑chipping cast iron applications, enabling stable parameters and safer unattended running. As the insert is designed for ISO group K materials, it is recommended where abrasive particles and fragmenting chips are expected; the combination of grade, coating and chip control improves both dimensional consistency and component appearance without complex parameter tweaking. For robust, repeatable cast iron turning choose the Walter Tools DCMT070204-MK4 WKK20S insert — contact Metav Werkzeuge for application advice or to arrange a supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DCMT070204-MK4-WKK20S-WALTER Designation: DCMT070204-MK4 WKK20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 55° Plate size: 07 Plate thickness: 02 Tolerance class: M Chipbreaker: MK4 Special features Grade: WKK20S Coating: Tiger‑tec Silver Material application: Cast iron (ISO group K) Execution: T Optimised for abrasive wear and short chips FAQ Which materials is this insert suited for? The DCMT070204-MK4 WKK20S is optimised for cast iron (ISO group K), with the grade and coating engineered to manage abrasive wear and short, breaking chips commonly found in cast iron machining. What does the WKK20S grade and Tiger‑tec Silver coating provide? WKK20S is a coated carbide grade in the Tiger‑tec Silver family; it offers enhanced wear resistance and thermal stability for productive cutting and longer edge life when turning cast iron. How does the MK4 chipbreaker affect cutting performance? The MK4 chipbreaker produces controlled, short chips for safer chip evacuation and consistent surface finishes, reducing the likelihood of chip entanglement during continuous turning operations. What are the key geometry specifications to check when fitting this insert? Check the rhombic 55° plate form, 7° clearance angle, 0.4 mm corner radius and tolerance class M to ensure correct seating and expected machining behaviour; the SKU is DCMT070204-MK4-WKK20S-WALTER. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification only; no affiliation between our company and the manufacturers is implied. The offered article is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DCMT070204-MM4 WMP20G MM4 Wendeplatten - Walter Tools
Take advantage of the combination of cost-effectiveness, reliable chip control and easy integration into standard toolholders for consistent stainless‑steel turning. Order the DCMT070204‑MM4 WMP20G directly via Metav Werkzeuge or contact our consultants for application advice. DCMT070204-MM4 WMP20G indexable turning insert, Tiger·tec Gold coating for rostfreier Stahl — Walter Tools The DCMT070204-MM4 WMP20G is a rhombic 55° indexable turning insert designed for machining rostfreier Stahl under medium to robust cutting conditions. Tiger·tec Gold coating for improved tool life Optimised MM4 chipbreaker for stable chip control 7° relief angle for reliable cutting engagement Rhombic 55° form with 0.4 mm corner radius Reliable performance for rostfreier Stahl turning operations The Tiger·tec Gold‑based grade WMP20G delivers a balance of wear resistance and edge stability tailored to rostfreier Stahl. Its coating technology reduces adhesion and heat build‑up at the cutting edge, which improves process consistency and reduces the frequency of insert changes. For manufacturing environments where material toughness and built‑up edge are common, this insert offers a measurable improvement in tool life and repeatability, supporting higher uptime and fewer interruptions to the production flow. Consistent chip control to prevent process interruptions Equipped with the MM4 chipbreaker and a rhombic 55° geometry, the insert ensures predictable chip formation and evacuation in rotational turning applications. Stable chip control lowers the risk of entanglement and surface damage, enabling uninterrupted cycles on automatic lathes and CNC machines. The controlled chip form also simplifies coolant and tool‑holder selection, so machining strategies remain efficient while protecting workpiece integrity. Precision geometry that supports accurate finishing and long service intervals The insert’s 7° relief and 0.4 mm corner radius combine to offer a reliable cutting engagement and defined cutting edge strength. A moderate corner radius helps achieve improved surface finish without sacrificing edge robustness during interrupted cuts. The rhombic 55° shape provides versatile clearance and turning angles for a range of external turning tasks. Together, these geometrical features translate into fewer reworks and consistent part quality across batches. For dependable stainless‑steel turning with Tiger·tec Gold technology, request application guidance and availability from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and supply options. Technical data Article number: DCMT070204-MM4-WMP20G-WALTER Article designation: DCMT070204-MM4 WMP20G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Core specifications Relief angle: 7° Corner radius: 0.4 mm Insert shape: Rhombus 55° Size code: 07 Thickness code: 02 Materials & special features Coating series: Tiger‑tec Gold Grade: WMP20G (coated carbide) Chipbreaker: MM4 Suitable for: rostfreier Stahl (M) FAQ What materials is this insert suitable for? The DCMT070204‑MM4 WMP20G insert is specified for rostfreier Stahl (material group M) and is formulated to manage the toughness and heat characteristics of these alloys. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WMP20G grade reduces edge adhesion and improves thermal resistance, leading to longer tool life and more consistent machining results in rostfreier Stahl. Can the MM4 chipbreaker be used on automated lathes? Yes, the MM4 chipbreaker produces controlled chips suitable for automated lathes and CNC turning centres, helping to reduce stoppages caused by poor chip evacuation. What cutting characteristics does the rhombic 55° shape offer? The rhombic 55° geometry provides effective clearance and cutting angles for external turning, enabling versatile tool paths and accessible cutting edges for finishing tasks. Is the insert compatible with standard insert pockets and toolholders? The DCMT070204‑MM4 WMP20G fits standard toolholders designed for DCMT‑form inserts; confirm holder compatibility before use to ensure correct clamping and orientation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, factory‑new goods from the manufacturer Walter Tools.
DCMT070204-MM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the MM4 chipbreaker for dependable machining of stainless steels; precise geometry ensures stable cutting and predictable chip control. Order the DCMT070204-MM4 WMP20S indexable insert directly via Metav Werkzeuge or consult the Metav advisors for application-specific recommendations. DCMT070204-MM4 WMP20S – Indexable turning insert for stainless steels, Rhombic 55° | Walter Tools The DCMT070204-MM4 WMP20S is a rhombic 55° indexable turning insert designed for secure chip formation and reliable performance when machining stainless steels under medium to robust conditions. Tiger·tec Silver coating for long tool life Optimised MM4 chipbreaker for stainless steel 7° relief angle for secure chip control Rhombic 55° form with 0.4 mm corner radius Efficient machining of stainless steels with fewer interruptions The combination of the Tiger·tec Silver coating and the insert’s dedicated geometry reduces friction and supports a stable cutting edge when machining stainless steels. The coated cemented carbide grade, designed for the M material group, improves tool life and resistance to work-hardening tendencies common in austenitic stainless grades. By promoting predictable heat management and secure chip formation, this insert helps maintain cycle times and reduces the need for unscheduled tool changes — a direct advantage for production-oriented turning operations. Predictable chip control and consistent cutting performance Equipped with the MM4 chipbreaker and a modest 7° relief angle, the insert delivers controlled chip breaking and evacuation in continuous and interrupted cuts. The chipformer geometry is engineered to avoid built-up edge and to produce short, manageable chips when cutting ductile stainless steels, which in turn increases machining stability and reduces thermal loading on the tool. These characteristics translate into more consistent surface finish and fewer process deviations during longer production runs. Precision geometry for repeatable dimensions and surface quality The Rhombic 55° insert shape combined with a 0.4 mm corner radius provides a balance between robustness and accuracy: the geometry supports a defined cutting edge for repeatable part tolerances while the corner radius helps absorb cutting forces without compromising surface integrity. The compact size designation (size 07) is suitable for a wide range of toolholders and setups, enabling straightforward integration into existing turning fixtures and minimising setup complexity. Proven brand engineering for reliable workshop performance As a product from Walter Tools, this insert benefits from engineering focused on stable cutting-edge formation and predictable tool behaviour. The proven material and coating choices aim to deliver process security across variable stainless-steel grades, supporting higher productivity and consistent results. For procurement teams seeking to standardise on robust inserts for demanding M-group applications, this grade offers a pragmatic mix of economy and performance. Contact Metav Werkzeuge for tailored selection advice on Walter Tools DCMT070204-MM4 WMP20S and to discuss optimised insert inventories for stainless-steel turning applications Technical Data SKU: DCMT070204-MM4-WMP20S-WALTER Article designation: DCMT070204-MM4 WMP20S Label: Drehwendeschneidplatte DCMT070204-MM4 WMP20S Walter Tools Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Insert form: Rhombus 55° Size designation: 07 Thickness designation: 02 Tolerance class: M Suitable material group: M (stainless steels) Special features Series: Tiger·tec Silver Grade/sort: WMP20S (coated cemented carbide) Chipbreaker: MM4 Application focus: Machining of stainless steels under medium to robust conditions Series/grade description: WMP20S is a Walter grade optimised for secure chip formation and stable cutting edges on stainless steels FAQ What materials is this insert intended for? The DCMT070204-MM4 WMP20S insert is intended primarily for stainless steels (material group M), where the grade and geometry support secure chip formation. How does the MM4 chipbreaker benefit turning operations? The MM4 chipbreaker on this Walter Tools insert promotes predictable chip breaking and evacuation, which reduces the risk of built-up edge and supports consistent surface quality in stainless-steel turning. What is the advantage of the Rhombic 55° shape with a 0.4 mm corner radius? The Rhombic 55° form provides a versatile cutting angle for turning profiles, while the 0.4 mm corner radius gives robustness against shock and helps maintain repeatable dimensional accuracy. Is this insert compatible with standard DCMT toolholders? The designation DCMT070204-MM4 indicates the ISO fit and size (size 07), making the insert compatible with standard toolholders designed for DCMT inserts; toolholder selection should match the insert form and size. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT070204-MM4 WSM10S WSM10S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with a proven MM4 chipbreaker delivers reliable chip control and prolonged tool life when machining demanding materials; the compact rhombic geometry with a 0.4 mm corner radius ensures repeatable surface quality and stable cutting edges. Order the insert directly via Metav Werkzeuge or request tailored cutting data from our consultants for optimised productivity. DCMT070204-MM4 WSM10S turning insert — coated carbide for rostfreier Stahl and superalloys | Walter Tools DCMT070204-MM4 WSM10S is a rhombic indexable insert designed for productive roughing and medium finishing of rostfreier Stahl and heat‑resistant alloys, featuring a Tiger·tec Silver coating and MM4 chip control Tiger·tec Silver coated carbide MM4 chipbreaker for controlled chips Rhombus 55° geometry for versatile turning 7° clearance angle for secure cutting High-performance coating for heavy-duty turning The advanced Tiger·tec Silver coating combines wear resistance with thermal stability to cope with materials that generate high cutting temperatures. For shops facing batches of rostfreier Stahl or superalloys, the coated cemented carbide substrate supports longer tool life and fewer indexings, which lowers downtime and tool costs. The coating is engineered to reduce adhesive wear and preserve a stable cutting edge, improving dimensional consistency across runs without complex process changes. Consistent chip control and safer machining Equipped with the MM4 chipbreaker and a 0.4 mm corner radius, this insert promotes predictable chip formation and evacuation. Predictable chips reduce risk of workpiece damage and help maintain machine uptime; the controlled shear also contributes to improved surface quality. The insert’s design simplifies parameter selection: stable chip behaviour allows for higher metal removal rates with less risk, translating into measurable productivity gains for serial and batch production. Geometry and tolerance for precision and repeatability The Rhombus 55° form and 7° clearance angle provide a balanced approach between accessibility and rigidity, enabling external and light‑angle operations with consistent force distribution to the cutting edge. Tolerance class M ensures close dimensional conformity for tooling systems and repeatable pocket fit, supporting fast tool changes and predictable results. The combination of geometry and tolerance helps shops achieve tighter process control and consistent part quality across shifts. Practical application notes and setup guidance The grade WSM10S is optimised for rostfreier Stahl and heat‑resistant superalloys (ISO group M and S), making it suitable where material adhesion and poor thermal conductivity challenge the cutting edge. The insert suits conventional holders that accept DCMT‑style rhombic inserts; ensure the clamping seat is clean and that seat runout is minimised for best performance. For finishing passes, reduce feed slightly to refine the surface while retaining the insert’s wear advantages; for roughing, exploit the chipbreaker and maintain coolant or appropriate cutting conditions to manage heat. For tailored machining recommendations and to secure the DCMT070204-MM4 WSM10S insert from Walter Tools, contact Metav Werkzeuge for cutting data and fast delivery: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: DCMT070204-MM4-WSM10S-WALTER Product name: Drehwendeschneidplatte DCMT070204-MM4 WSM10S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM10S Shape: Rhombus 55° Chipbreaker: MM4 Facts Corner radius: 0.4 mm Clearance angle: 7° Insert size: 07 Thickness: 02 Tolerance class: M Special features Coated cemented carbide (Tiger·tec Silver) Suitable for rostfreier Stahl (ISO group M) Suitable for heat‑resistant superalloys and titanium (ISO group S) Execution: T FAQ Which materials is this insert suitable for? The DCMT070204-MM4 WSM10S insert is designed for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and wear resistance for these challenging materials. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WSM10S grade improves resistance to adhesive wear and heat, supporting a stable cutting edge and longer tool life in high‑temperature cutting scenarios. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker promotes predictable chip formation, aiding chip evacuation and reducing the risk of built‑up edge, which contributes to consistent surface finish and safer machining. Is this insert compatible with standard DCMT toolholders? Yes, the rhombic 55° form of the insert fits standard DCMT holders; ensure correct seating and minimal runout for optimal performance with this Walter Tools insert. What performance can be expected regarding repeatability? Tolerance class M and the precise geometry deliver predictable pocket fit and repeatable results, which helps maintain consistent part quality across serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DCMT070204-MM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger‑tec Silver coating and the MM4 chipbreaker for reliable performance in demanding materials; order the DCMT070204‑MM4 WSM20S turning insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT070204‑MM4 WSM20S turning insert — Tiger‑tec Silver coated, Walter Tools (for stainless steels and superalloys) The DCMT070204‑MM4 WSM20S is an indexable turning insert designed for heavy cutting and secure chip control in ISO M and ISO S applications, combining a robust coated carbide grade with a dedicated chipbreaker geometry Tiger‑tec Silver coating for wear resistance Optimised MM4 chipbreaker for stable chips 0.4 mm corner radius for fine surface finishes Suitable for stainless steels and superalloys Longer tool life through advanced coating technology The insert’s Tiger‑tec Silver coating and the WSM20S grade deliver a combination of thermal stability and wear resistance that supports continuous production in challenging environments. As a coated carbide solution, the geometry and surface treatment reduce flank wear and help maintain cutting-edge integrity over longer tool cycles. This translates to fewer insert changes and increased machine uptime, which benefits batch production and one-off jobs alike. Safer machining with controlled chip formation The MM4 chipbreaker is engineered to produce short, consistent chips when machining tough, low-thermal-conductivity materials. Stable chip formation minimises the risk of built-up edge and reduces interruptions caused by entangled swarf. The result is smoother tool engagement, improved surface integrity and a lower likelihood of unplanned stoppages, which supports predictable process planning and improved throughput. Precision geometry for reliable surface quality A rhombic 55° shape combined with a 0.4 mm corner radius and 7° clearance delivers precise contact geometry for turning operations that demand consistent part finish. The insert form supports repeatable cutting forces and stable tool–workpiece interaction, promoting superior surface quality while limiting vibration. For precision-oriented workshops, this geometry helps achieve target tolerances with fewer rework cycles. Broad application range and process security Designed for machining stainless steels (ISO M) and heat‑resistant superalloys or titanium (ISO S), the insert offers process security in demanding material classes that typically cause edge deterioration and thermal loading. Its specification supports part producers and subcontractors working with exotic alloys, where consistent performance and predictable tool life are essential. The insert suits both finishing and medium turning tasks, providing a balance between economy and performance. For application advice or availability of Walter Tools Tiger‑tec Silver inserts, please contact Metav Werkzeuge for tailored recommendations and order support Technical Data SKU: DCMT070204‑MM4‑WSM20S‑WALTER Designation: DCMT070204‑MM4 WSM20S Product type: Turning insert (indexable) Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Facts Clearance angle: 7° Corner radius: 0.4 mm Insert form: Rhombic 55° Insert size code: 07 Thickness code: 02 Tolerance class: M Special features Coating: Tiger‑tec Silver Chipbreaker: MM4 Material application: S / M (superalloys/titanium; stainless steels) Application focus: Difficult‑to‑machine materials, medium to finishing cuts Execution: T FAQ What materials is this insert suitable for? The DCMT070204‑MM4 WSM20S insert is specified for ISO M (stainless steels) and ISO S (superalloys/titanium) applications and performs well where thermal stability is required. How does the MM4 chipbreaker improve machining? The MM4 chipbreaker on the Walter Tools insert promotes controlled, short chips and stable chip flow, reducing built‑up edge and improving surface finish during continuous cutting. What surface finish can be expected with this insert geometry? Thanks to the rhombic 55° form and the 0.4 mm corner radius, the insert supports consistent contact conditions for reliable surface integrity in finishing and semi‑finishing operations. Is the coating suitable for high‑temperature cutting? Yes; the Tiger‑tec Silver coating combined with the WSM20S grade provides enhanced thermal resistance and wear protection for demanding cuts in heat‑generating materials. Which industries benefit most from this insert? Subcontractors and precision engineering shops working with stainless steels, aerospace alloys or heat‑resistant materials will find this insert advantageous for repeatable, secure machining processes. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT070204-MM4 WSM30S WSM30S Wendeplatten - Walter Tools
Taking advantage of a Tiger·tec Silver carbide grade and an MM4 chipbreaker, this insert combines process security and stable chip control for reliable machining of demanding materials such as rostfreier Stahl and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or contact the consultants for application support. DCMT070204-MM4 WSM30S rhombic 55° turning insert — Tiger·tec Silver, MM4 chipbreaker (Walter Tools) A DCMT070204-MM4 WSM30S indexable turning insert engineered for productive machining of rostfreier Stahl and heat‑resistant superalloys, offering a robust coated‑carbide grade within the Tiger·tec Silver series Tiger·tec Silver coated carbide grade WSM30S Optimised MM4 chipbreaker for stable chips Suited to rostfreier Stahl and heat‑resistant alloys Rhombic 55° insert with 0.4 mm corner radius High productivity for hard‑to‑cut materials The combination of a coated carbide grade from the Tiger·tec Silver family and an MM4 chipbreaker delivers consistent cutting performance when machining rostfreier Stahl and nickel‑base alloys. The coating improves heat resistance and reduces flank wear, which means longer tool life and fewer indexings on the turret. For practical production, this translates into fewer stoppages and a more predictable tool‑change schedule, supporting higher throughput without sacrificing component quality. Precise chip control and surface reliability With a dedicated chipbreaker geometry, the insert produces short, controllable chips under typical turning conditions, reducing the risk of chip entanglement and workpiece damage. The rhombic 55° form and 0.4 mm corner radius improve the engagement and create a reliable cutting edge for stable feeding; as a result, the insert enables improved surface finish and dimensional repeatability even in challenging feeds. The geometry is particularly beneficial where secure chip evacuation is required to maintain cycle times and machine availability. Robust design that supports consistent process results Tolerance class M and a relief angle of 7° provide a balanced compromise between edge strength and cutting access in shoulder and profiling operations. The insert is optimised for applications where heat generation and built‑up edge formation are common; by using a dedicated grade and coating technology, the cutting edge retains integrity under higher cutting temperatures, supporting repeatable quality across batches. This design focus reduces rework rates and contributes to a predictable manufacturing process. Practical benefits for workshop integration As a compact, indexable solution, the insert simplifies stocking and tool management: the standard ISO designation and common size format make integration into existing toolholders straightforward. Reduced downtime from longer tool life and stable chip formation improves overall equipment effectiveness (OEE). For teams aiming to increase productivity while maintaining component quality, the insert provides a technically sound and economically sensible option that aligns with modern machining requirements. Contact Metav Werkzeuge for tailored machining recommendations and to arrange supply of Walter Tools Tiger·tec Silver turning inserts Technical data Article number: DCMT070204-MM4-WSM30S-WALTER Label: Drehwendeschneidplatte DCMT070204-MM4 WSM30S Walter Tools Product type: Drehwendeschneidplatte Facts Corner radius: 0.4 mm Relief angle: 7° Size designation: 07 Thickness designation: 02 Special features Series: Tiger·tec Silver Grade / Sorte: WSM30S Chipbreaker: MM4 Insert form: Rhombus 55° Tolerance class: M Material suitability: S / M Use case: machining of rostfreier Stahl and heat‑resistant superalloys FAQ What materials is this insert designed for? The DCMT070204‑MM4 WSM30S insert is intended for rostfreier Stahl and heat‑resistant superalloys (S and M material groups), benefiting from the Tiger·tec Silver coating to resist heat and wear. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker on this Walter Tools insert produces short, manageable chips and promotes stable chip flow, which helps to maintain surface quality and reduce the risk of chip‑related interruptions. Which insert geometry suits finishing operations? The rhombic 55° form with a 0.4 mm corner radius offers a compromise between edge strength and access for finishing passes, providing improved surface finish and dimensional control during profiling and shoulder turning. Protected trademarks and trade names belong to their respective owners. Brand names are used for clarification only and do not imply any connection between our company and the manufacturers. The offered item is an original, brand‑new product from the manufacturer. Walter Tools: Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DCMT070204-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, dependable chip control and a geometry optimised for versatile turning of steel components; the insert supports productive, repeatable machining. Order the insert directly via Metav Werkzeuge or request further advice from the consultants if needed. DCMT070204-MP4 WPP10G Turning Insert — Tiger·tec Gold coating for steel (P) The DCMT070204-MP4 WPP10G is a 55° rhombic indexable insert engineered for precision and consistent performance in the turning of steel components. Tiger·tec Gold coated carbide for durability MP4 chipbreaker for reliable chip control Rhombic 55° geometry for versatile turning 0.4 mm corner radius and 7° relief angle Consistent wear resistance for economical steel machining The insert uses the Tiger·tec Gold coating combined with the WPP10G grade of coated carbide, delivering a balance of wear resistance and toughness that is engineered for steel. Coated carbide means a hard base material with a protective, wear-reducing layer applied; this structure reduces flank wear under the thermal and mechanical loads typical of steel turning and therefore extends tool life. As the chemistry and microstructure of the grade are optimised for heat and chip formation in steel, the insert is certified for the steel (P) material group, which covers both unalloyed and alloyed steels according to ISO classification. The result is stable performance over longer cutting intervals and fewer insert changes during production. Controlled chips and predictable surface finish for higher throughput The MP4 chipbreaker is designed to shape and evacuate chips reliably at a wide range of cutting parameters, which contributes directly to stable chip formation and a reduced risk of built-up edge. The combination of a 0.4 mm corner radius and a 7° relief angle promotes a consistent surface finish while keeping cutting forces within predictable limits. The Rhombic 55° form offers a favourable cutting approach angle for a variety of turning tasks, supporting both light finishing cuts and moderate interrupted cuts. These features translate into measurable benefits: fewer disruptions on the machine, improved first-pass quality and a steadier production flow. Broad applicability and production advantages in workshop environments Categorised for ISO P applications, the insert is suitable for general turning tasks in production and job-shop environments where process reliability and repeatability are priorities. The insert’s geometry and coated grade help to reduce cycle interruptions and minimise the need for corrective rework, improving overall productivity. Because the cutting edge is formed and coated to preserve resistance to abrasion and thermal softening, the insert supports predictable machining schedules and reduced downtime for tool changes. Compatibility with standard toolholders and systems makes integration into existing turning cells straightforward, enabling quick adoption without complex retooling. For a tailored recommendation on integrating Walter Tools Tiger·tec Gold inserts into the production line, contact Metav Werkzeuge for consultancy and technical support via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data SKU: DCMT070204-MP4-WPP10G-WALTER Designation: DCMT070204-MP4 WPP10G Product type: Turning indexable insert Brand: Walter Tools Core measurements Insert family: DCMT070204-MP4 Shape: Rhombic 55° Size: 07 Thickness: 02 Corner radius: 0.4 mm Relief angle: 7° Tolerance class: M Materials & features Coating: Tiger·tec Gold Grade: WPP10G Chipbreaker: MP4 Application: Steel (ISO P) Base material: Coated carbide Execution: T FAQ What materials is this insert suitable for? The DCMT070204-MP4 WPP10G insert is intended for machining steel and is rated for the ISO P material group. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP10G grade improves wear resistance and thermal stability, resulting in longer service life and consistent cutting performance under steel turning conditions. Which chipbreaker is built into this insert and what is its advantage? This insert features the MP4 chipbreaker, which promotes controlled chip formation and reliable evacuation, enhancing surface quality and reducing interruptions. How does the insert geometry affect cutting performance? The Rhombic 55° geometry combined with a 0.4 mm corner radius and 7° relief provides a balance between strength and finishing capability, suitable for versatile turning tasks. Is this insert compatible with standard toolholders? The DCMT070204-MP4 family is compatible with standard clamping systems for indexable turning inserts, allowing straightforward integration into existing tool setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and indicate no affiliation between our company and the named brands. The offered item is an original, factory-new product of Walter Tools.
DCMT070204-MP4 WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP20G grade for long tool life and consistent chip control in steel turning; combine robust geometry and the MP4 chipbreaker for reliable surface finish and process stability. Order the insert directly via Metav Werkzeuge or consult the team for selection support. DCMT070204-MP4 WPP20G indexable turning insert by Walter Tools — coated carbide, for steel DCMT070204-MP4 WPP20G is an indexable turning insert designed for general steel machining, delivering productive cutting and long wear life in a compact rhombic form Tiger·tec Gold coated carbide for extended life Optimised MP4 chipbreaker for stable chip formation Rhombic 55° form for versatile turning applications 7° clearance with 0.4 mm corner radius for reliable edges Longer tool life through advanced coating and grade The combination of Tiger·tec Gold coating and the WPP20G carbide grade provides improved wear resistance and a stable cutting edge when machining steel (P). Coating technology reduces friction and thermal load at the cutting zone, which leads to longer insert life and fewer tool changes. For production environments this translates into higher uptime and lower total machining costs, as the coated surface helps maintain cutting performance under typical steel turning conditions. Geometry and chip control that stabilise the process The rhombic 55° shape and the MP4 chipbreaker are engineered for consistent chip formation and reliable surface finish on medium to universal steel applications. A 7° clearance angle minimises rubbing and supports precise engagement, while the 0.4 mm corner radius balances edge strength with the ability to produce accurate profiles. These design choices reduce vibration and enable repeatable results, improving cycle-time stability and part quality during continuous turning operations. Practical application guidance for efficient integration This insert suits a wide range of turning tasks on unalloyed and alloyed steel where balanced toughness and wear resistance are required. The plate thickness and tolerance class support secure clamping in standard toolholders that accept DCMT-style inserts. For selection, pair the insert with appropriate cutting parameters and coolant strategy to exploit the Tiger·tec Gold benefits; establishing recommended speeds and feeds will improve performance and reduce insert consumption. If optimisation is needed, Metav Werkzeuge’s consultants can advise on cutting data and holder compatibility. Contact Metav Werkzeuge for tailored recommendations on Walter Tools DCMT070204-MP4 WPP20G inserts and secure the optimal insert selection for steel turning tasks Technical data Article number: DCMT070204-MP4-WPP20G-WALTER Name: DCMT070204-MP4 WPP20G indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Core specifications Grade: WPP20G Coating: Tiger·tec Gold Form: Rhombus 55° Clearance angle: 7° Corner radius: 0.4 mm Chipbreaker: MP4 Size: 07 Thickness: 02 Tolerance class: M Designs and features Coated carbide insert Suitable for steel (P group) Optimised for stable chip formation Balanced wear resistance and toughness Compatible with DCMT toolholders FAQ What materials is this insert suitable for? This insert is designed primarily for machining steel (P group); the WPP20G grade and Tiger·tec Gold coating are optimised for unalloyed and alloyed steels. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker promotes consistent chip formation and evacuation; with the rhombic geometry it supports stable turning and improved surface finish when cutting steel. What are the key geometry dimensions to consider? Important dimensions include the rhombic 55° form, 7° clearance angle and 0.4 mm corner radius; these influence engagement, edge strength and achievable part profiles. Is this insert suitable for roughing or finishing operations? The insert’s balanced corner radius and coated grade make it versatile for both medium finishing and general-purpose turning in steel, depending on cutting parameters. Which toolholder style is compatible with this insert? The insert follows the DCMT geometry and fits standard toolholders designed for DCMT-type indexable turning inserts; ensure correct clamping and seat condition for optimal results. Manufacturer: Walter Tools / Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
DCMT070204-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability and targeted wear resistance for efficient cast-iron turning; the insert’s Tiger·tec Silver grade and RK4 chipbreaker ensure stable chip formation and predictable tool life — order or request advice via Metav Werkzeuge. DCMT070204-RK4 WKK20S indexable turning insert for cast iron, Tiger·tec Silver — Walter Tools The DCMT070204-RK4 WKK20S is an indexable turning insert engineered for abrasive cast-iron machining, providing a balance of wear resistance and consistent chip control in production environments. Tiger·tec Silver coating for wear resistance RK4 chipbreaker for controlled chip formation Rhombic 55° shape with 0.4 mm corner radius Optimised for cast iron machining Durable coating and material selection for longer tool life The DCMT070204-RK4 WKK20S insert uses a coated carbide grade from the Tiger·tec Silver family, designed to withstand the abrasive nature of cast-iron workpieces. The coating technology reduces flank and crater wear, which translates into longer effective cutting periods and fewer indexings. For production lines processing grey or nodular cast iron, this means more consistent part quality and lower tool-change frequency, supporting predictable cycle times and less downtime. Geometry that delivers predictable chips and surface quality A rhombic 55° insert geometry combined with the RK4 chipbreaker produces short, controlled chips suitable for interrupted and continuous cuts in cast iron. The 0.4 mm corner radius helps maintain edge strength while enabling fine surface finishes in finishing passes. The 7° clearance angle reduces rubbing at the flank, lowering heat generation and helping to preserve the cutting edge. In practical terms, this geometry reduces the risk of built-up edge and simplifies chip evacuation in established turning setups. Process security and application-oriented performance The WKK20S grade offers a balance between wear resistance and toughness, tailored for abrasive cast-iron conditions. The tolerance class M ensures reproducible insert fitment and stable seating in toolholders, which contributes to repeatable machining accuracy. Using a coated carbide insert optimised for cast iron supports higher material removal rates with reliable edge behaviour, improving overall shop-floor productivity while maintaining component tolerances. Contact Metav Werkzeuge for technical advice or to arrange supply of Walter Tools DCMT070204-RK4 WKK20S turning inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DCMT070204-RK4-WKK20S-WALTER Designation: DCMT070204-RK4 WKK20S Product type: Indexable turning insert Facts Clearance angle: 7° Corner radius: 0.4 mm Shape: Rhombus 55° Insert size: 07 Thickness code: 02 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK20S Chipbreaker: RK4 Coated carbide Application: cast iron Indexable insert without seat/hardware Manufacturer: Walter Tools FAQ Which materials is this insert suited for? The insert is optimised for cast iron applications; the WKK20S grade and Tiger·tec Silver series are tuned for abrasive, break-prone chips typical of cast materials. How does the RK4 chipbreaker affect machining? The RK4 chipbreaker promotes short, controlled chips and steady chip evacuation, improving process reliability when turning cast-iron components with interrupted or continuous cuts. What geometry and dimensions are relevant for setup? The rhombic 55° geometry, 0.4 mm corner radius and 7° clearance angle define cutting behaviour and seating; these values support fine surface finishes and robust edge strength for finishing and semi-finishing operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns.
DCMT070204-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance, an RM4 chipbreaker for reliable chip control and a 0.4 mm corner radius that supports consistent surface quality in stainless steel turning; order the insert via Metav Werkzeuge or request application advice from our consultants. DCMT070204-RM4 WMP20G turning insert — Tiger·tec Gold, RM4 chipbreaker (Walter Tools) DCMT070204-RM4 WMP20G is a turning insert engineered for medium to robust stainless steel machining, offering a balanced geometry for reliable performance in production environments High-performance Tiger·tec Gold coating Optimised RM4 chipbreaker for chip control Suitable for stainless steel machining (ISO M) Rhombic 55° DCMT insert, 0.4 mm corner radius Consistent results through optimised geometry and coating The combination of a coated carbide grade and a targeted chipbreaker design yields measurable process advantages. The WMP20G grade in the Tiger·tec Gold family is formulated for machining stainless steel, where workhardening and built-up edge are typical challenges. By pairing the RM4 chipbreaker with a rhombic 55° insert geometry and a 7° clearance, the insert promotes secure chip formation and repeatable cutting conditions. The practical result is reduced rework and fewer unscheduled tool changes, which supports continuous, efficient production. Technical design translated into workshop benefits The insert’s 0.4 mm corner radius and robust face geometry improve edge strength while maintaining access to tighter profiles. As an indexable turning solution, the DCMT form provides a compromise between strength and reach: the 55° diamond shape enables both robust grooving and general turning operations. The Tiger·tec Gold coating enhances wear resistance and thermal stability, assisting in maintaining a stable cutting edge under varying stainless steel conditions. For operations seeking reliability rather than experimental cutting windows, this combination reduces the likelihood of edge chipping and delivers a more consistent finish. Practical application and process guidance for production use In series production where process stability and surface quality matter, the insert’s design supports predictable behaviour across batches. The RM4 chipbreaker helps control chip form in interrupted cuts and during variable feed conditions commonly encountered with stainless steels. For workshop planning, using a proven indexable insert like this one simplifies inventory and tool change routines and contributes to steady productivity gains. Complementary tools and correct clamp rigidity are advised to fully exploit the insert’s strengths, and short checks after initial runs will confirm cutting parameters for sustained performance. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold turning inserts—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DCMT070204-RM4-WMP20G-WALTER Designation: DCMT070204-RM4 WMP20G Product type: turning insert Manufacturer: Walter Tools Numbers / Core technical data Clearance angle: 7° Corner radius: 0.4 mm Insert size: 07 Thickness code: 02 Tolerance class: M Special features / Versions Grade: WMP20G (Tiger·tec Gold) Chipbreaker: RM4 Insert shape: Rhombus 55° (DCMT) Series: Tiger-tec Gold Material group suitability: M (stainless steel) FAQ What materials is this insert designed for? The DCMT070204-RM4 WMP20G turning insert is specified for machining stainless steel (ISO group M) and is optimised for medium to robust turning conditions. What advantage does the Tiger·tec Gold grade offer? The WMP20G Tiger·tec Gold grade improves wear resistance and thermal stability, helping to maintain a stable cutting edge and consistent component finish in stainless steel applications. How does the RM4 chipbreaker affect cutting performance? The RM4 chipbreaker promotes controlled chip formation and reduces the risk of long or tangled chips, supporting safer turning and steadier cycle times with the DCMT geometry. Which cutting geometry features contribute to surface quality? The rhombic 55° form combined with a 0.4 mm corner radius provides edge strength and accessibility, which together support reproducible surface finishes in serial production. Is this an indexable insert suitable for production use? Yes, the DCMT070204-RM4 WMP20G is an indexable turning insert from Walter Tools, designed for durable, repeatable performance in workshop and production environments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer.
DCMT070204-RM4 WMP20S RM4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the RM4 chipbreaker for secure chip control and extended edge life when machining stainless steel; ideal where process stability and repeatable results are required. Order the Drehwendeschneidplatte DCMT070204-RM4 WMP20S directly via Metav Werkzeuge or consult our experts for cutting-data recommendations. DCMT070204-RM4 WMP20S Drehwendeschneidplatte – Tiger‑tec Silver, for stainless steel (Walter Tools) The DCMT070204-RM4 WMP20S is a rhombic 55° indexable insert designed for robust turning of stainless steel, offering a balance of wear resistance and reliable chip formation for medium to heavy-duty applications. Tiger‑tec Silver coated carbide grade WMP20S RM4 chipbreaker for stable chip control Rhombic 55° geometry for versatile turning 7° clearance and 0.4 mm corner radius Higher process efficiency with a wear-resistant grade The coated carbide WMP20S grade, developed within the Tiger‑tec Silver series, delivers a predictable tool life under the thermal and adhesive conditions typical of stainless steel machining. The combination of a modern PVD/CVD-style coating and a stable substrate reduces flank wear and builds resistance to heat-related edge deterioration. This translates into longer intervals between index changes and fewer unscheduled tool interventions, improving overall machine utilisation and lowering per-part tooling cost. Reliable chip control and consistent surface quality The RM4 chipbreaker is optimised for secure chip formation in tough-to-cut alloys, promoting manageable chip geometries and safe evacuation from the cut. Stable chip control reduces the risk of built-up edge and improves repeatability of part dimensions. As a result, operators obtain improved surface finishes and can maintain tighter tolerances with fewer reworks, particularly when turning ferritic or austenitic stainless grades that are prone to material adhesion. Geometry and clearance tuned for flexible turning The rhombic 55° insert shape and a 7° clearance angle permit a wide range of turning strategies, from light finishing passes to more demanding profiling tasks. The 0.4 mm corner radius supports robust edge strength while allowing for acceptable surface integrity on the workpiece; it is a compromise between edge stability and fine-finish capability. This geometry is suitable for standard toolholders using DCMT‑style inserts and supports both conventional and climb turning methods when process parameters are set accordingly. Application guidance for repeatable results This indexable insert is intended primarily for use on stainless steel (ISO group M) under medium to robust cutting conditions. Matching the insert with appropriate cutting speeds, feeds and coolant strategy is essential: lower cutting speeds and stable feed rates commonly reduce the tendency for built-up edge, while the coated grade helps withstand thermal loading. For machining programmes that demand predictable life and constant surface quality, the insert offers a dependable combination of wear resistance and chip management. Contact Metav Werkzeuge for tailored cutting-data sheets and application advice on Walter Tools Tiger‑tec Silver inserts to ensure optimal performance in specific stainless steel operations Technical data Article number: DCMT070204-RM4-WMP20S-WALTER Designation: DCMT070204-RM4 WMP20S Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 55° Plate size: 07 Plate thickness: 02 Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WMP20S Chipbreaker: RM4 Base material: coated carbide Series: Tiger‑tec Silver Execution: T Suitable for: stainless steel (ISO group M) FAQ What materials is this insert best suited for? The DCMT070204-RM4 WMP20S insert is designed for stainless steel (ISO group M) and performs well under medium to robust cutting conditions typical for those alloys. How does the Tiger‑tec Silver coating help in practice? The Tiger‑tec Silver coating improves thermal resistance and wear behaviour, enabling more consistent edge life and reducing the effects of adhesion during machining of stainless steels. Which chipbreaker should be expected with this insert? This indexable insert is equipped with the RM4 chipbreaker, engineered to produce controllable chips and minimise build-up on the cutting edge during heavy or interrupted cuts. Is the DCMT070204-RM4 WMP20S compatible with standard DCMT toolholders? Yes, the insert follows the DCMT geometric specification and is compatible with toolholders designed for that indexable insert profile and size. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation purposes only. There is no affiliation between Metav Werkzeuge and the listed manufacturers. The offered item is an original, factory‑new product of the manufacturer.
DCMT070204-RM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a dedicated RM4 chipbreaker and the robust Rhombus 55° geometry for reliable machining of stainless steels and heat-resistant alloys. Order the DCMT070204-RM4 WSM10S directly via Metav Werkzeuge or request application advice from our consultants. DCMT070204-RM4 WSM10S turning insert — Tiger·tec Silver grade for stainless steels and superalloys by Walter Tools The DCMT070204-RM4 WSM10S is a rhombic 55° turning insert engineered for stable chip formation and consistent edge life when machining stainless steels and heat-resistant superalloys in production environments. Tiger·tec Silver coated grade WSM10S Optimised RM4 chipbreaker for stable chips Rhombic 55° geometry with 0.4 mm corner radius 7° clearance angle for secure cutting edge High-performance cutting for tough-to-machine alloys The coated carbide WSM10S grade, part of the Tiger·tec Silver family, is tuned for high thermal resistance and improved wear behaviour when tackling stainless steels and heat-resistant superalloys. The RM4 chipbreaker promotes controlled chip formation under variable depths of cut, reducing the risk of snarled chips and unplanned stoppages. By combining a heat-resistant coating with an optimised chip management geometry, users benefit from longer effective tool life and fewer insert changes, which supports continuous production and lower overall machining cost. Precision geometry for consistent component surfaces The insert’s Rhombus 55° shape and 0.4 mm corner radius deliver a balance between edge strength and surface finish. The small corner radius stabilises the cutting edge under higher feed rates while helping to maintain dimensional accuracy on turned parts. A 7° clearance angle reduces rubbing against the workpiece and preserves the edge, enabling predictable wear progression and repeatable surface quality. These characteristics make the insert suitable for serial production where component consistency matters. Practical integration and process reliability Supplied in the DCMT format and finished to tolerance class M, the insert fits standard toolholders for indexable turning and is available in plate size 07 with thickness code 02. The combination of geometry, coating and chipbreaker supports straightforward process set-up and reduces the need for constant parameter adjustments. For operations focused on throughput and minimal downtime, the insert brings measurable improvements in process security and dependable performance across batches. Contact Metav Werkzeuge for tailored application recommendations and procurement of Walter Tools Tiger·tec Silver DCMT070204-RM4 WSM10S inserts Technical data Article number: DCMT070204-RM4-WSM10S-WALTER Product designation: DCMT070204-RM4 WSM10S Type: Turning insert Brand: Walter Tools Facts Corner radius: 0.4 mm Clearance angle: 7° Plate form: Rhombus 55° Plate size: 07 Plate thickness: 02 Tolerance class: M Special features Tiger·tec Silver coated carbide Grade: WSM10S Chipbreaker: RM4 Suitable materials: stainless steels and heat-resistant superalloys (S / M) Execution: T FAQ What materials is this insert suitable for? The DCMT070204-RM4 WSM10S is designed primarily for stainless steels and heat-resistant superalloys (ISO groups M and S), offering thermal resistance and stable chip control for these demanding materials. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker delivers controlled chip shaping and evacuation, which reduces chip-related interruptions and supports a steady cutting process when using the WSM10S grade. Which geometry benefits surface finish and edge life? The Rhombus 55° geometry combined with a 0.4 mm corner radius and 7° clearance provides a compromise between edge strength and finish, helping to maintain consistent surface quality and predictable wear. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used solely for explanation. There is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is original, factory-new merchandise from the manufacturer.
DCMT070204-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the RM4 chipbreaker for secure chip control when machining demanding materials; the compact 0.4 mm nose radius and 7° clearance angle deliver predictable surface quality. Order the insert directly via Metav Werkzeuge or request tailored machining advice from our consultants. DCMT070204-RM4 WSM20S indexable turning insert, Tiger·tec Silver, for rostfreier Stahl and superalloys (Walter Tools) The DCMT070204-RM4 WSM20S is a rhombic 55° indexable turning insert engineered for heavy and semi-finish turning of rostfreier Stahl and heat-resistant superalloys in industrial machining. Tiger·tec Silver coated cemented carbide Optimised for rostfreier Stahl and superalloys 7° clearance angle for secure cutting 0.4 mm nose radius for defined finish High‑performance grade for difficult-to-machine alloys The Tiger·tec Silver coating, combined with a coated cemented carbide substrate, provides improved thermal resistance and edge stability for prolonged tool life. Designed specifically for machining rostfreier Stahl and superalloys, this cutting grade supports a secure chip formation process under elevated temperatures. The result is consistent cutting behaviour and reduced risk of built‑up edge when compared with uncoated grades, which helps maintain productivity and reduces unplanned tool changes. Reliable geometry for predictable surface quality A rhombic 55° geometry with a 0.4 mm nose radius gives a balanced compromise between strength and surface finish. The moderate nose radius produces a defined part surface while avoiding excessive cutting forces during semi‑finishing passes. The 7° clearance angle maintains a controlled contact geometry at the flank, reducing friction and heat generation. These geometric choices translate into repeatable part tolerances and less downstream rework in serial production. Effective chip control for stable turning cycles The insert’s RM4 chipbreaker is optimised for medium to heavy cross‑sections in stainless steels and heat‑resistant alloys, promoting short, controllable chips even under interrupted cuts. Stable chip control minimises tool interference and improves machine uptime, particularly in automated or lights‑out environments. Using this insert with appropriate cutting parameters and coolant strategy enhances process reliability and supports predictable cycle times. Application guidance and process benefit This indexable insert suits applications where thermal resistance and edge security are paramount, such as shafts, flanges and components made from rostfreier Stahl or nickel‑base alloys. When paired with the correct holder and cutting data, the grade delivers longer tool life and consistent surface integrity, contributing directly to reduced total machining cost and higher first‑pass yield in production runs. For specific application advice or suitability checks for a particular rostfreier Stahl grade, contact Metav Werkzeuge for a machining consultation and quote on the DCMT070204-RM4 WSM20S insert Technical Data Article number: DCMT070204-RM4-WSM20S-WALTER Product type: indexable turning insert Designation: DCMT070204-RM4 Brand: Walter Tools Series: Tiger·tec Silver Core technical data Geometry: Rhombus 55° Clearance angle: 7° Nose radius: 0.4 mm Insert size: 07 Thickness: 02 Special features Coating: Tiger·tec Silver Chipbreaker: RM4 Substrate: coated cemented carbide Material suitability: rostfreier Stahl, superalloys (S/M) FAQ What materials is this insert designed for? The DCMT070204-RM4 WSM20S insert is intended for machining rostfreier Stahl and heat‑resistant superalloys, with a grade tuned for secure chip formation and thermal resistance. Can the insert be used for finishing operations? Yes, the 0.4 mm nose radius and rhombic geometry provide a balance suitable for semi‑finish to finishing passes when correct feeds and speeds are applied. Which chipbreaker should be selected for heavy turning? The RM4 chipbreaker integrated in this insert is optimised for medium to heavy cuts in rostfreier Stahl and superalloys and supports short, controllable chips. Is the Tiger·tec Silver coating beneficial for long tool life? The Tiger·tec Silver coating enhances thermal stability and edge strength, contributing to extended tool life under demanding cutting conditions on rostfreier Stahl. Does the insert require specific holders or clamping systems? Standard holders compatible with DCMT geometry and secure clamping for indexable inserts are recommended; correct seat and clamp torque ensure repeatable performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the brands listed. The offered item is an original, factory‑new product of the manufacturer.
DCMT070204-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of thermal resistance, stable chip formation and precise geometry to keep machining rostfreier Stahl and superalloys productive and predictable; order directly via Metav Werkzeuge or contact our consultants for application advice. DCMT070204-RM4 WSM30S rhombic 55° indexable turning insert with Tiger·tec Silver coating (Walter Tools) The DCMT070204-RM4 WSM30S is a rhombic 55° indexable turning insert engineered for machining rostfreier Stahl and heat‑resistant superalloys, optimised for stable chip control and extended edge life. Tiger·tec Silver coating for thermal stability RM4 chipbreaker for controlled chip formation Rhombic 55° form with 0.4 mm corner radius Tolerance class M and 7° clearance angle Longer tool life when machining heat‑resistant alloys The WSM30S grade, part of the Tiger·tec Silver family, is a coated carbide designed specifically for demanding materials. Its coating technology increases thermal resistance and supports a stable cutting edge when temperatures rise, which is critical when processing rostfreier Stahl and superalloys. By choosing this grade, shops gain a measurable reduction in wear rate and improved repeatability at elevated cutting speeds, delivering fewer tool changes and more consistent component quality. Reliable chip control for safer, cleaner turning The combination of the RM4 chipbreaker and the rhombic geometry delivers predictable chip formation and evacuation. The insert’s 0.4 mm corner radius and rhombic 55° shape balance strength and accessibility for turning operations, reducing the risk of built‑up edge on sticky materials. Stable chips shorten cycle times by reducing interrupts for cleaning and tool checks, which supports higher overall process efficiency and a safer workplace. Precision fit and process consistency for production runs With its ISO designation DCMT070204-RM4 and tolerance class M, this indexable insert ensures consistent seating and repeatable results across tool holders. The 7° clearance angle and nominal plate thickness (designation “02”) are chosen to suit standard turning tool bodies while providing the rigidity needed for medium to heavy cuts. For workshops seeking reliable output on rostfreier Stahl and superalloys, the geometry and grade deliver a balance of edge stability and cutting performance that supports longer, uninterrupted production runs. If there is any uncertainty about suitability for a specific application or required cutting data, Metav Werkzeuge can advise on parameters and toolholder compatibility; technical enquiries can be sent to info@metav-werkzeuge.com or discussed by telephone at +49 2822 7131930. Contact Metav Werkzeuge to discuss integrating Walter Tools Tiger·tec Silver inserts into machining processes for rostfreier Stahl and superalloys and to receive tailored application support Technical data Article number: DCMT070204-RM4-WSM30S-WALTER SKU: DCMT070204-RM4-WSM30S-WALTER Designation: DCMT070204-RM4 WSM30S Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Numbers / Core technical data Plate size: 07 Plate thickness: 02 Clearance angle: 7° Corner radius: 0.4 mm Tolerance class: M Designs / Special features Coating family: Tiger·tec Silver Grade: WSM30S (coated carbide) Chipbreaker: RM4 Plate form: Rhombus 55° Material groups: S / M Application: rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S) Execution: T FAQ What materials is this insert suited for? The DCMT070204-RM4 WSM30S is formulated for machining rostfreier Stahl (ISO group M) and heat‑resistant superalloys (ISO group S), where thermal stability and edge strength are required. How does the RM4 chipbreaker improve performance? The RM4 chipbreaker on the DCMT070204-RM4 WSM30S controls chip shape and evacuation, reducing built‑up edge and improving surface finish during continuous turning operations. What does the tolerance class M mean for production? Tolerance class M ensures consistent insert dimensions and seating accuracy, so the Walter Tools insert delivers repeatable cutting geometry and straightforward indexability during series production. Is the WSM30S grade coated or uncoated? WSM30S is a coated carbide grade from the Tiger·tec Silver series, offering enhanced thermal resistance and wear properties for difficult‑to‑cut materials. Can this insert be used in standard toolholders? Yes. The DCMT070204-RM4 geometry and standard size 07 are compatible with common toolholders designed for rhombic 55° inserts; confirm holder specifications for clamp and seat compatibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the mentioned brands; the offered article is an original, factory‑new product from the respective manufacturer.
DCMT070204-RP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of a wear-resistant Tiger·tec Gold grade, precise RP4 chip control and a compact Rhombus 55° geometry for consistent turning results in steel applications. Order directly via Metav Werkzeuge or consult their specialists for process-matching recommendations. DCMT070204-RP4 WPP10G — Indexable turning insert, Tiger·tec Gold, Walter Tools The DCMT070204-RP4 WPP10G is a rhombic 55° indexable turning insert optimised for steel machining, offering controlled chip formation and extended tool life. Tiger·tec Gold coating for long tool life Optimised RP4 chipbreaker for stable chips Rhombic 55° geometry for flexible turning Engineered for steel machining (ISO P) Boosted productivity through controlled wear and longer edge life The combination of a coated carbide grade and the Tiger·tec Gold technology provides predictable wear behaviour under typical steel cutting conditions. This leads to fewer tool changes and reduced process interruptions, which in turn improves overall throughput. The WPP10G grade is developed for the thermal and chip-formation characteristics of steel (ISO P), offering a balanced compromise between wear resistance and toughness for reliable performance in medium to demanding cuts. Consistent chip control and improved surface quality The RP4 chipbreaker is designed to produce short, well-controlled chips when turning steel, lowering the risk of entanglement and machine downtime. Combined with the insert’s 0.4 mm corner radius and Rhombus 55° shape, this contributes to stable cutting conditions and a fine surface finish. The 7° free angle helps to reduce rubbing on the flank face, supporting dimensional stability and repeatable geometrical results in serial production. Flexible application and secure tool clamping Tolerance class M and the standardised insert form enable reliable seating and repeatable indexing in common turning toolholders. The compact thickness and plate size facilitate use in finishing and medium roughing tasks where access and clearance are critical. As the grade is explicitly developed for steel, the insert is suitable for a wide range of unalloyed and alloyed steels, allowing shop-floor consolidation of tool types and simpler process planning. Practical advantages for shop-floor integration Using a grade that balances toughness and wear resistance simplifies machining parameter selection and reduces the need for separate specialised inserts. The RP4 chip control together with the coated substrate supports consistent productivity gains and less scrap, while the insert’s geometry ensures good toolholder compatibility. For production environments prioritising uptime and predictable tool life, this turning insert delivers practical, measurable benefits. For a tailored recommendation and fast supply of DCMT070204-RP4 WPP10G from Walter Tools, contact Metav Werkzeuge to discuss batch sizes, delivery and optimal cutting data for specific steel grades. Technical data SKU: DCMT070204-RP4-WPP10G-WALTER Designation: DCMT070204-RP4 WPP10G Product type: Indexable turning insert (drehwendeschneidplatte) Brand: Walter Tools Series: Tiger·tec Gold Core specifications Size: 07 Thickness code: 02 Corner radius: 0.4 mm Free angle: 7° Plate form: Rhombus 55° Features & applications Grade: WPP10G Chipbreaker: RP4 Material application: Steel (ISO P) Tolerance class: M Execution: T FAQ What materials is this insert intended for? This turning insert is designed for machining steel according to ISO P; the WPP10G grade is tuned for the heat and chip-formation characteristics typical of steel. What does the RP4 chipbreaker provide? The RP4 chipbreaker promotes controlled, short-to-medium chips during turning, helping to prevent chip entanglement and improving process reliability with Walter Tools inserts. How does the Tiger·tec Gold technology help in production? Tiger·tec Gold provides a balance of wear resistance and toughness, extending edge life under steel cutting conditions and enabling longer uninterrupted production runs. Which insert geometry suits tight access or inclined cuts? The Rhombus 55° geometry of this insert allows flexible approach angles and better access in confined setups while maintaining a solid cutting edge for finishing operations. Is the insert compatible with standard toolholders? Yes; the insert follows common form and tolerance standards (class M), ensuring repeatable seating and reliable clamping in compatible turning holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
DCMT070204-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coated carbide, the RP4 chipformer and a compact rhombic geometry for efficient steel turning; order the insert via Metav Werkzeuge or request application advice from our consultants. DCMT070204-RP4 WPP20G turning insert — Walter Tools, Tiger‑tec Gold, RP4 chipformer DCMT070204-RP4 WPP20G is a coated carbide turning insert for versatile steel machining applications, offering a balance of wear resistance and reliable chip control Tiger‑tec Gold coated carbide grade WPP20G RP4 optimised chipformer for reliable chip control Rhombic 55° form for versatile turning 7° relief angle and 0.4 mm corner radius Reliable cutting performance for steel turning The DCMT070204-RP4 WPP20G insert combines a Tiger‑tec Gold coating with a robust substrate to deliver wear resistance and extended tool life when machining steels. As a coated carbide grade optimised for ISO P materials, the insert is engineered to cope with the typical heat and chip formation of steel cutting, reducing the need for frequent tool changes. The rhombic 55° geometry provides a good balance between cutting edge strength and accessibility for external and light profiling tasks, while the 0.4 mm corner radius helps achieve consistent surface finish without sacrificing edge robustness. These technical characteristics translate into measurable productivity benefits on serial turning operations. Consistent chip control and process stability Process reliability is driven by the RP4 chipformer and the combination of coating and substrate microstructure. The chipformer RP4 promotes predictable chip breakage across a range of feeds and cutting speeds, supporting stable machining cycles and reduced risk of built‑up edge. The 7° relief reduces rubbing and heat generation at the flank, which contributes to longer effective cutting life and more reproducible component tolerances. For manufacturing environments where uptime and repeatability matter, this insert delivers the rational advantages of consistent chip evacuation and lower scrap rates. Practical integration and selection guidance Selecting the correct insert grade and geometry simplifies tool management and stocking. The WPP20G grade is a universal choice within the Tiger‑tec Gold family for general steel use, providing an economical compromise between toughness and hardness for mixed batch production. The rhombic shape and standard size allow easy integration into common turning toolholders, enabling quick changeovers and minimal setup time. For customers unsure about the ideal cutting data or holder compatibility, supplementary cutting parameters and application notes are available on request to support smooth implementation. Contact Metav Werkzeuge today for tailored application advice on the DCMT070204-RP4 WPP20G turning insert, or to request cutting data and availability; eMail: info@metav-werkzeuge.com – Tel: +49 2822 7131930 Technical data Article number: DCMT070204-RP4-WPP20G-WALTER Name: Drehwendeschneidplatte DCMT070204-RP4 WPP20G (turning insert) Type: Turning insert / indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G ISO designation: DCMT070204-RP4 WPP20G UID: DCMT070204-RP4-WPP20G-WALTER Facts Relief angle: 7° Corner radius: 0.4 mm Insert size: 07 Thickness: 2.0 mm Shape: Rhombic 55° Tolerance class: M Chipbreaker: RP4 Special features Coated carbide grade Tiger‑tec Gold Suitable for steel (ISO P) Optimised for stable chip formation and broad steel coverage Series: Tiger‑tec Gold Manufacturer: Walter Tools FAQ What materials is this insert suitable for? This insert is intended for machining steels; the WPP20G grade and Tiger‑tec Gold technology are optimised for ISO P applications. How does the RP4 chipformer benefit production? The RP4 chipformer promotes reliable chip breaking and evacuation, improving process stability and reducing interruptions on serial turning operations. Is the geometry suitable for finishing and general turning? The rhombic 55° shape combined with a 0.4 mm corner radius offers a balance between accessibility and edge strength for general turning and light finishing. Can cutting data and holder recommendations be provided? Yes — Metav Werkzeuge can supply recommended cutting parameters and holder compatibility guidance for the DCMT070204-RP4 WPP20G insert. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only. There is no affiliation between our company and the trademark owners. The offered item is original and brand new.
DCMT070204-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the RP4 chipbreaker to improve productivity and chip control in steel turning operations; order directly via Metav Werkzeuge or contact our consultants for application advice. DCMT070204-RP4 WPP30G — Turning indexable insert for steel by Walter Tools DCMT070204-RP4 WPP30G is a rhombic 55° turning insert designed for efficient steel machining in general turning applications Tiger·tec Gold coating for extended tool life RP4 chipbreaker for stable chip control Rhombic 55° shape for versatile turning 7° clearance and 0.4 corner radius for reliable finishes Higher throughput with lower unit cost The Tiger·tec Gold grade WPP30G combines a coated carbide microstructure with process-oriented design to deliver a longer tool life and consistent cutting performance when machining steel (ISO P). The result is reduced downtime for insert changes and lower cost per component in serial production. For CNC turning centres where cycle time and repeatability matter, this insert helps maintain stable cutting parameters over longer tool life, contributing to predictable production planning and improved overall equipment effectiveness. Better surface quality and chip management The RP4 chipbreaker is engineered to produce short, controllable chips on the typical heat and chip-forming behaviour of steels, reducing the risk of chip entanglement and tool damage. Paired with the rhombic 55° geometry and a 0.4 mm corner radius, the insert supports fine surface finishes and dimensional control during finishing and semi-finishing passes. The 7° clearance angle helps prevent rubbing at the flank, enabling lower cutting forces and consistent contact conditions even under varying feed rates. Simple selection and secure process integration With tolerance class M and the ISO-style designation DCMT070204-RP4 WPP30G, the insert fits standard toolholders for rhombic 55° inserts and simplifies inventory management. The coated carbide composition makes it suitable primarily for steel machining as defined in ISO groups, while the WPP30G composition strikes a balance between wear resistance and toughness for mixed batch work. Production engineers benefit from predictable wear behaviour, enabling straightforward tool-life monitoring and easy integration into existing machining processes. For applications requiring dependable steel turning performance, request tailored cutting data and availability from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and supply options. Technical Data Article number: DCMT070204-RP4-WPP30G-WALTER SKU: DCMT070204-RP4-WPP30G-WALTER ISO designation: DCMT070204-RP4 WPP30G Facts Plate size: 07 Plate thickness: 02 Clearance angle: 7° Corner radius: 0.4 mm Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP30G (coated carbide) Chipbreaker: RP4 Plate shape: Rhombus 55° Suitable material group: Steel (ISO P) Execution: T (single-sided / specific cutting orientation) FAQ What materials is this insert best suited to machine? The DCMT070204-RP4 WPP30G turning insert from Walter Tools is optimised for steel (ISO P) and delivers balanced wear resistance and toughness for common steel grades. How does the RP4 chipbreaker affect machining performance? The RP4 chipbreaker on the DCMT070204-RP4 WPP30G ensures stable, short chips and improved process security during steel turning, reducing downtime related to chip issues. Can this insert be used for finishing passes? Yes — with its 0.4 mm corner radius and 7° clearance, the indexable insert provides consistent surface quality and dimensional control suitable for finishing and semi-finishing operations. Which toolholders are compatible with the DCMT070204-RP4 insert? Standard holders for rhombic 55° inserts that accept DCMT-format plates are compatible; the ISO-style designation simplifies selection for typical turning tool systems. What are the main advantages of the Tiger·tec Gold series for production shops? Tiger·tec Gold-coated grades such as WPP30G offer extended tool life, stable cutting edge behaviour and broad applicability across steel machining, contributing to predictable tool performance in production environments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names are used for explanation purposes only and indicate no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
DCMT070208-FM4 WSM10S FM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a dedicated FM4 chipbreaker and a compact Rhombic 55° geometry for stable cutting in stainless steel and high-temperature alloys; order genuine Walter Tools inserts directly via Metav Werkzeuge or ask the Metav consultants for application support. DCMT070208-FM4 WSM10S indexable turning insert — Tiger·tec Silver, for stainless steel and superalloys, Walter Tools The DCMT070208-FM4 WSM10S is an indexable turning insert engineered for secure chip control and extended tool life when machining stainless steel and heat-resistant superalloys in demanding production environments Tiger·tec Silver coated carbide grade WSM10S Optimised FM4 chipbreaker for stable chips 7° clearance with 0.8 mm corner radius Rhombic 55° geometry for universal turning Consistent performance on stainless steel and superalloys increases uptime The combination of the WSM10S grade and the Tiger·tec Silver coating delivers high resistance to thermal degradation and wear when machining stainless steel and nickel‑based alloys. Coated carbide means a thin, wear‑resistant layer over a tough carbide substrate; this reduces flank wear and supports a stable cutting edge under high temperatures. For production managers, the practical result is fewer tool changes and more consistent component quality, which contributes to predictable cycle times and reduced unscheduled downtime. Reliable chip control and shape stability for precision turning The insert’s FM4 chipbreaker is optimised to form short, controllable chips across a range of feeds and depths of cut, lowering the risk of built-up edge and improving surface finish. Combined with the Rhombic 55° lead angle and a 0.8 mm corner radius, the geometry provides a balance between strength and accessibility in profiling and general turning. The measured 7° clearance angle reduces rubbing and heat generation at the flank, supporting repeatable dimensional results and prolonged edge life in serial production. Compact system design that supports productivity and tool management With a plate designation corresponding to size 07 and a thickness of 02, this insert fits common turning toolholders while keeping clamping areas compact for multi‑operation set‑ups. The coated grade is targeted at tougher materials where thermal and mechanical loads are high, enabling productive machining strategies with controlled cutting data. For workshop planners, the insert’s predictable wear behaviour simplifies inventory rotation and cutting parameter documentation, allowing smoother process control and easier integration into tool management systems. For tailored cutting data, application recommendations or procurement of genuine Walter Tools inserts such as the DCMT070208-FM4 WSM10S, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for expert, production‑focused advice and rapid supply. Technical data Article number: DCMT070208-FM4-WSM10S-WALTER SKU / designation: DCMT070208-FM4 WSM10S Manufacturer: Walter Tools Product type: indexable turning insert Grade series: Tiger·tec Silver Sort: WSM10S Core data Clearance angle: 7° Corner radius: 0.8 mm Plate form: Rhombic 55° Plate size: 07 Plate thickness: 02 Chipbreaker: FM4 Design & special features Coated carbide grade for high thermal resistance Optimised chip control for stainless steel and superalloys Robust edge for stable cutting in demanding applications Compact geometry for common turning toolholders FAQ What materials is this insert suitable for? The DCMT070208-FM4 WSM10S insert is optimised for machining stainless steel (ISO group M) and heat‑resistant superalloys/titan (ISO group S), delivering stable chip formation and good edge life. What is the advantage of the Tiger·tec Silver coating? Tiger·tec Silver on the WSM10S grade reduces thermal wear and improves resistance against adhesion, which helps the insert maintain a reliable cutting edge when turning high‑temperature materials. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker is designed to produce short, controllable chips and to lower built‑up edge risk, which improves surface finish and cycle stability in continuous turning operations. Is the Rhombic 55° geometry suitable for profiling? Yes; the Rhombic 55° geometry offers a versatile approach for general turning and light profiling while the 0.8 mm corner radius adds edge strength for finishing passes. Which toolholders accept this insert? The DCMT070208-FM4 WSM10S follows standard DCMT insert dimensions and fits toolholders designed for DCMT 07 series inserts; compatibility should be confirmed against the specific holder specification. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names and protected trademarks are used for explanation only; there is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
DCMT070208-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of Tiger·tec Silver performance and the WSM20S grade for demanding materials; the FM4 chipbreaker ensures stable chip formation while the 7° clearance and 0.8 mm nose radius deliver consistent surface quality. Order this insert directly via Metav Werkzeuge or consult our specialists for application support. DCMT070208-FM4 WSM20S Walter Tools — Indexable turning insert, Tiger·tec Silver, FM4 chipbreaker A DCMT070208-FM4 WSM20S indexable turning insert designed for turning rostfreier Stahl and heat‑resistant superalloys, offering a balanced geometry for reliable finish and chip control in demanding production environments. Tiger·tec Silver coated grade WSM20S Optimised FM4 chipbreaker for stable chips Rhombus 55° geometry for versatile turning 7° clearance and 0.8 mm nose radius High-performance cutting on difficult materials The coated WSM20S grade, part of the Tiger·tec Silver family, is engineered for the thermal and mechanical stresses of machining rostfreier Stahl and superalloys. The combination of a wear‑resistant coating and a robust substrate supports a secure cutting edge and predictable wear behaviour, which translates directly into longer tool life and fewer indexings. In practice, this means less downtime for tool changes and a more stable machining process when tackling tough batches or complex workpiece geometries. Precise chip control for consistent surface quality Equipped with the FM4 chipbreaker and a Rhombus 55° form, the insert promotes reliable chip formation and evacuation under varying cutting conditions. The FM4 geometry was developed to reduce built‑up edge and encourage segmented chips that are easier to handle in automated cells. As a result, the insert helps to maintain consistent surface finishes and reduces the need for secondary cleaning processes, which benefits throughput and downstream quality checks. Geometry and edge design that improve process security A clearance angle of 7° combined with a 0.8 mm corner radius offers a compromise between robustness and finish capability, making the insert suitable for both light finishing passes and more stable medium cutting. The tolerance class M ensures dimensional reliability for repeatable setups, while the rhombic shape enhances access to shoulder and profile features. For engineering teams, this means fewer trial cuts and a shorter ramp‑up when introducing new components into production. Practical benefits for workshop efficiency The insert’s coded thickness and size deliver compatibility with common toolholders and permit straightforward inventory management. Because the grade is targeted at high‑temperature and adhesive wear regimes, coolant and parameter optimisation will often extend the effective life further; this produces a favourable cost‑benefit ratio across serial production. Technical teams will value the reduced variability in tool performance, which supports stable cycle times and predictable maintenance planning. For machining challenges that demand high process reliability with a Tiger·tec Silver solution, contact Metav Werkzeuge for availability, cutting data and application advice — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: DCMT070208-FM4-WSM20S-WALTER Designation: DCMT070208-FM4 WSM20S Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: FM4 Brand: Walter Tools Facts Free angle: 7° Corner radius: 0.8 mm Size code: 07 Thickness code: 02 Shape: Rhombus 55° Tolerance class: M Special features Coating technology: Tiger·tec Silver Substrate: coated carbide Material suitability: S / M (superalloys, rostfreier Stahl) Application focus: difficult‑to‑machine materials and, depending on geometry, stainless steels FAQ What materials is this insert suitable for? The DCMT070208-FM4 WSM20S insert from Walter Tools is designed for superalloys and rostfreier Stahl, reflecting the S / M material suitability and the Tiger·tec Silver coating. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on the DCMT070208-FM4 WSM20S improves chip formation and evacuation, helping to avoid built‑up edge and supporting consistent surface quality during turning. Can this insert be used for finishing passes? Yes, the 0.8 mm corner radius and 7° clearance make the insert appropriate for finishing and stable medium cutting when mounted in the correct toolholder. Which SKU should be ordered for this specification? Order SKU DCMT070208-FM4-WSM20S-WALTER for the indexable turning insert DCMT070208-FM4 WSM20S by Walter Tools. Walter Tools is a trademark of its respective owner. Protected trademarks and trade names are used for explanatory purposes only. There is no affiliation between our company and the referenced brands. The offered item is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
DCMT070208-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of durable coating, stable chip control and precise geometry for predictable steel turning performance; order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. DCMT070208-FP4 WPP10G indexable turning insert for steel, Tiger·tec Gold, 7° clearance — Walter Tools A DCMT070208-FP4 WPP10G insert optimised for turning steel components, offering a rhombic 55° geometry and a Tiger·tec Gold coated carbide grade for high process reliability Tiger·tec Gold coating for extended tool life Precision rhombic 55° geometry for stable cutting FP4 chipbreaker for consistent chip control 7° clearance with 0.8 mm corner radius for finish Consistent productivity thanks to advanced coating and grade The combination of the Tiger·tec Gold coating and the WPP10G coated carbide grade delivers a robust balance between wear resistance and toughness. Designed for steel turning (material group P), this insert sustains thermal loads typical of steel machining while maintaining a stable cutting edge. The result is reduced tool-change frequency and more predictable machine uptime, which supports higher overall productivity in batch and continuous production environments. Geometry that stabilises the cut and improves surface finish The rhombic 55° insert form, paired with a corner radius of 0.8 mm and 7° clearance, optimises contact conditions between tool and workpiece. The acute geometry enables secure entry into interrupted or profiled cuts while the defined corner radius helps to dampen vibration and improve surface integrity. For engineers assessing process windows, this geometry narrows variance in cutting forces and aids repeatable dimensional outcomes on turned components. Chip control tailored for steels with the FP4 breaker The FP4 chipbreaker is engineered to produce short, controllable chips when machining unalloyed and alloyed steels. By influencing chip curl and breakage close to the cutting zone, the design lowers the risk of chip entanglement and tool damage. In practical terms, better chip control contributes to safer automatic loading, less manual clearing, and more reliable cycle times — a key benefit for automated turning centres and lights-out operations. Application guidance and process security The insert is specified in tolerance class M with a plate thickness code 02 and size code 07, making it suitable for standard toolholders that accept DCMT 07 inserts. The combination of grade, coating and breaker makes it particularly effective where a balance between wear resistance and fracture toughness is required, for example medium to high machining speeds when working steels. For critical components, pairing the insert with optimised feeds and speeds will extend life while preserving surface quality. For demanding steel turning tasks, prefer the Walter Tools Tiger·tec Gold WPP10G insert for proven process security; contact Metav Werkzeuge for tailored cutting data and availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number / SKU: DCMT070208-FP4-WPP10G-WALTER Designation: DCMT070208-FP4 Grade / Sort: WPP10G Series: Tiger-tec Gold Manufacturer: Walter Tools Facts Insert form: Rhombic 55° Clearance angle: 7° Corner radius: 0.8 mm Chipbreaker: FP4 Plate size code: 07 Plate thickness code: 02 Tolerance class: M Material group suitability: P (steel) Special features Coated carbide grade Balanced wear resistance and toughness Optimised chipformer for steel machining Suitable for general turning and stable finishing cuts FAQ What workpiece materials is this insert intended for? The DCMT070208-FP4 WPP10G insert is designed for machining steels (material group P), covering unalloyed and alloyed steels as described by the Tiger·tec Gold grade. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker on the insert promotes short, controllable chips when turning steel, improving chip evacuation and reducing the risk of entanglement and tool damage during automated operations. Which geometry advantages does the rhombic 55° form provide? The rhombic 55° geometry combined with a 0.8 mm corner radius and 7° clearance enhances entry into profiles and interrupted cuts while contributing to improved surface finish and stable cutting forces. Is the insert compatible with standard DCMT toolholders? Yes, the insert follows the DCMT070208 designation and is compatible with toolholders designed for DCMT 07 inserts; confirm holder specifications to match thickness and size codes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is original and brand-new from the manufacturer, Walter Tools.
DCMT070208-FP4 WPP20G Wendeplatten - Walter Tools
Reliable productivity and consistent tool life result from the combination of Tiger·tec Gold coating and the FP4 chipbreaker; precise geometry and a 7° relief angle support stable turning of steel components — order directly via Metav Werkzeuge or request application advice from our consultants. DCMT070208-FP4 WPP20G Turning insert for steel — Tiger·tec Gold, FP4 chipbreaker (Walter Tools) The DCMT070208-FP4 WPP20G is a rhombic 55° indexable turning insert engineered for robust and repeatable machining in steel applications. Tiger·tec Gold coated carbide for long life FP4 chipbreaker for reliable chip control Rhombic 55° geometry for versatile turning 0.8 mm corner radius ensures edge strength Longer tool life through advanced coating and grade performance The combination of the Tiger·tec Gold coating and the WPP20G grade delivers a balance of wear resistance and toughness optimised for steel machining. As a coated carbide solution, the grade controls thermal and abrasive wear while maintaining a stable cutting edge over extended cycles, which reduces tool changes and contributes to predictable production output. The design targets the typical heat and chip formation of steels (ISO group P), making the insert a cost-effective choice for mixed production runs where reliability matters. Predictable chip formation and improved process stability Chip control is central to uninterrupted turning operations; the FP4 chipbreaker on this insert promotes consistent chip formation and evacuation, lowering the risk of built-up edge and workpiece finish defects. The 7° relief angle, combined with a 0.8 mm corner radius, supports a robust cutting edge able to withstand intermittent interruptions and variable cutting depths. Clear chip flow also reduces secondary handling and machine downtime, which benefits cycle time and operator safety in batch or single-part production. Versatile geometry and straightforward integration into tooling systems The rhombic 55° form and insert size 07 enable flexible application across facing, light to medium turning, and general-purpose operations. The insert’s tolerance class M and execution T make it compatible with standard clamping systems and toolholders that accept DCMT-style indexable inserts. For process planners, the WPP20G grade simplifies grade selection for steel workpieces, offering an accessible solution for workshops seeking repeatable surface quality without constant process tuning. For application recommendations or to procure Tiger·tec Gold inserts by Walter Tools, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert assistance Technical Data Article number: DCMT070208-FP4-WPP20G-WALTER Designation: DCMT070208-FP4 WPP20G Type: Turning insert / indexable insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 07 Plate thickness: 02 Plate form: Rhombus 55° Tolerance class: M Special features Chipbreaker: FP4 Material application: Steel (P) Coating technology: Tiger·tec Gold (coated carbide) Execution: T Sortenbeschreibung: Wear-resistant, universal grade for steel machining FAQ Is this insert suitable for turning steel components? The DCMT070208-FP4 WPP20G from Walter Tools is designed specifically for steel (ISO P) machining and offers a coated-carbide grade optimised for typical steel cutting conditions. What advantages does the WPP20G grade provide? WPP20G is a Walter Tools grade within the Tiger·tec Gold technology that balances wear resistance and toughness, providing longer edge life and consistent performance in steel applications. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker shapes chips for controlled evacuation, improving surface finish and reducing the likelihood of chip entanglement during turning with the DCMT070208-FP4 WPP20G insert. Can this insert be used for finishing passes? With a 0.8 mm corner radius and rhombic 55° geometry, the insert suits medium finishing and semi-finishing; for ultra-fine finishes, a smaller radius or a dedicated finishing insert may be preferable. Which toolholders accept this insert form? The rhombic 55° DCMT form is compatible with standard indexable turning toolholders designed for DCMT-style inserts; ensure the holder matches the insert size and clamping type. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT070208-FW4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating for extended tool life and the FW4 chipbreaker for consistent chip control to keep turning processes productive and predictable; order the inserts directly via Metav Werkzeuge or consult their specialists for application support. DCMT070208-FW4 WPP10G — Turning Insert (Tiger·tec Gold, FW4) by Walter Tools The DCMT070208-FW4 WPP10G is a rhombic 55° turning insert designed for reliable steel machining with optimised chip control and durable coated-carbide performance. Tiger·tec Gold coating for long tool life FW4 chipbreaker for controlled chips Rhombic 55° shape for versatile turning Suitable for steel (ISO P) machining Boosted throughput with a durable coated grade The combination of Tiger·tec Gold coating and the WPP10G grade delivers a clear production advantage: longer tool life and consistent cutting performance when machining steel (ISO P). The coated carbide resists abrasive wear and thermal stress, which reduces downtime for insert changes and supports a more predictable process flow. For operations where cycle time and repeatability matter, this insert offers an efficient balance between wear resistance and toughness, helping to lower overall machining costs through reduced tooling interventions. Reliable chip control for safer, cleaner turning The FW4 chipbreaker and rhombic geometry provide controlled chip formation, improving swarf evacuation and surface integrity. Controlled chips reduce the risk of entanglement and protect workpiece finish, which is particularly valuable in continuous production or automated turning centres. Explaining briefly: a chipbreaker shapes how the metal flows away from the cutting edge, so predictable chips mean fewer disruptions and easier handling at the machine, enhancing both operator safety and part quality. Geometrical features that widen application scope With a 7° relief angle, a 0.8 mm corner radius and the rhombus 55° form, this insert supports a range of turning tasks from light finishing to medium roughing in steel. The geometry provides a compromise between a sharp cutting edge for good finishes and sufficient edge strength for durability. The tolerance class M contributes to consistent clamping and repeatability in toolholders designed for DCMT-style inserts, which helps maintain part accuracy across batches and supports quick index changes without extensive rework. Practical benefits for production planning and tool selection Specifying this insert streamlines procurement and process planning: the ISO-style designation and series affiliation to Tiger·tec Gold make tool selection straightforward for machining teams. For engineers less familiar with insert nomenclature, the grade indicates a coated carbide optimised for steel, while the chipbreaker code FW4 signals its chip control characteristics. Choosing such a well-documented insert reduces trial-and-error on the shop floor and supports reproducible setup parameters across shifts. Contact Metav Werkzeuge to discuss the Walter Tools DCMT070208-FW4 WPP10G insert for steel machining, request matching toolholder recommendations or place an order — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DCMT070208-FW4-WPP10G-WALTER Label: Drehwendeschneidplatte DCMT070208-FW4 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Turning insert Series: Tiger-tec Gold Grade: WPP10G Tolerance class: M Key dimensions & metrics Relief angle: 7° Corner radius: 0.8 mm Insert shape: Rhombus 55° Size code: 07 Thickness code: 02 Features & applications Coating: Tiger·tec Gold (coated carbide) Chipbreaker: FW4 Material group: P (steel) Execution: T ISO designation: DCMT070208-FW4 WPP10G FAQ Which materials are best suited for this insert? This insert is formulated for steel (ISO P) machining; the WPP10G grade and Tiger·tec Gold coating are optimised to handle typical heat and chip formation encountered when turning unalloyed and alloyed steels. How does the Tiger·tec Gold coating improve production? The Tiger·tec Gold coating on the WPP10G grade increases wear resistance and thermal stability, which extends insert life and supports consistent cutting behaviour throughout longer tool engagements. What cutting tasks is the rhombic 55° shape good for? The rhombus 55° geometry provides versatility for both medium roughing and finishing operations, offering a reliable balance between edge strength and access to varied part contours. How does the FW4 chipbreaker affect surface quality? The FW4 chipbreaker delivers controlled chip segmentation and evacuation, reducing surface damage from recutting chips and contributing to improved and repeatable surface finishes. Is the insert compatible with standard DCMT toolholders? Yes, the ISO-style designation DCMT070208 indicates compatibility with toolholders designed for DCMT inserts; the tolerance class M aids repeatable clamping and positioning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com