DCGT11T308-FM2 WSM20S FM2 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WSM20S grade and the FM2 chipbreaker for a reliable, economical turning process; ideal for machining stainless steels and heat‑resistant superalloys. Order the DCGT11T308‑FM2 WSM20S indexable turning insert directly via Metav Werkzeuge or ask our consultants for cutting data and application advice. DCGT11T308‑FM2 WSM20S indexable turning insert, Tiger·tec Silver – Walter Tools (for stainless steel and superalloys) The DCGT11T308‑FM2 WSM20S is an indexable turning insert engineered for stable metal removal in stainless steels and heat‑resistant superalloys, combining a Tiger·tec Silver coating with a robust chipbreaker geometry. Tiger·tec Silver coated carbide grade WSM20S FM2 chipbreaker for stable chip control Rhombic 55° insert with 0.8 mm corner radius Optimised for stainless steel and superalloys Delivering consistent cutting performance for tough alloys The combination of a Tiger·tec Silver coating and the WSM20S grade provides high resistance to wear and thermal loads encountered in machining stainless steel and nickel‑based alloys. This engineered coating technology improves heat management at the cutting edge and prolongs tool life, which leads to fewer indexings and reduced downtime. In practical terms, the result is a more predictable process with consistent component quality and lower tooling costs per part. Stable chip control and improved surface finish The FM2 chipbreaker and the rhombic 55° geometry deliver controlled chip segmentation and evacuation during turning operations. The combination of a 0.8 mm corner radius and a 7° clearance angle supports a reliable cutting edge that reduces the risk of built‑up edge on ductile, work‑hardening stainless steels. Improved chip control directly benefits surface quality and reduces secondary finishing, making the insert suitable for both semi‑finishing and finishing passes. Productivity through process security and repeatability Designed for demanding production environments, this insert supports consistent cutting behaviour across batches. The grade’s thermal and edge stability promotes repeatable performance in long runs, helping to reduce scrap and manual rework. By favouring stable chip formation and maintaining a strong cutting edge, the insert contributes to increased machine uptime and predictable machining cycles—key factors in efficient workshop planning. Geometry and application guidance for reliable setup With an insert size of 11, T3 thickness and a nominal rhombic 55° form, the geometry enables versatile clamping in standard turning toolholders that accept DCGT‑style inserts. The FM2 breaker is optimised for medium to heavy feeds where controlled chips are required, while the WSM20S grade is especially suitable for the M and S ISO groups (rostfreie Stähle and heat‑resistant superalloys). For best results, combine appropriate cutting speeds and coolant strategy to match the alloy and component rigidity. Contact Metav Werkzeuge for application support and to secure Walter Tools Tiger·tec Silver inserts tailored to stainless steel and superalloy turning Technical Data Article number: DCGT11T308-FM2-WSM20S-WALTER Label: Drehwendeschneidplatte DCGT11T308-FM2 WSM20S Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Grade/Sort: WSM20S Series: Tiger‑tec Silver Facts Insert size: 11 Corner radius: 0.8 mm Clearance angle: 7° Thickness: T3 Geometry: Rhombus 55° Chipbreaker: FM2 Tolerance class: G Special features Coating: Tiger·tec Silver Material compatibility: stainless steel; heat‑resistant superalloys (ISO M, S) Carbide base: coated cemented carbide Typical applications: reliable chip control, finishing and semi‑finishing of difficult‑to‑cut alloys FAQ What materials is this insert designed for? The DCGT11T308‑FM2 WSM20S insert from Walter Tools is formulated for stainless steel and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and wear resistance for these demanding materials. Which chipbreaker should be chosen for general turning with this grade? The FM2 chipbreaker paired with the WSM20S grade is recommended for stable chip formation and controlled evacuation during medium to heavy feeds in tough alloys. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WSM20S grade increases thermal resistance at the cutting edge and improves wear behaviour, which helps maintain edge integrity and extends effective tool life in continuous production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGT11T308-FN2 WN10 Wendeplatten - Walter Tools
Taking advantage of the WN10 uncoated carbide grade together with the FN2 chipbreaker delivers stable chip formation and consistent cutting performance; combined with the Rhombus 55° geometry and a 0.8 mm corner radius, this insert supports predictable cycle times and repeatable results — order directly via Metav Werkzeuge or contact our consultants for application advice. DCGT11T308-FN2 WN10 — Turning insert (Rhombus 55°, 0.8 mm corner radius) by Walter Tools DCGT11T308-FN2 WN10 is a precision turning indexable insert designed for general turning operations where consistent chip control and robust edge performance are required FN2 chipbreaker for reliable chip formation WN10 uncoated carbide grade for predictable cutting Rhombus 55° geometry for flexible tool approach 0.8 mm corner radius for enhanced edge strength Stable chip control improves process reliability The combination of the FN2 chipbreaker with the WN10 uncoated carbide grade is selected to promote consistent chip formation under a variety of cutting conditions. The chipbreaker geometry reduces the risk of long, stringy chips and supports secure evacuation in both light and interrupted cuts. For production environments this translates into fewer stoppages and more predictable cycle times, supporting an efficient machining process without relying on complex coatings. Geometry that adds flexibility to turning tasks The Rhombus 55° shape and 0.8 mm corner radius balance cutting edge strength with access to narrow profile areas. A 55° approach angle offers a favourable compromise between cutting force distribution and surface finish, while the 7° clearance supports low rubbing and reduced flank wear. The plate thickness (T3) ensures adequate support in the pocket; together these geometric choices allow a single insert to cover a wide range of routine turning tasks with stable performance. Predictable life and quality through material selection The insert is supplied in the WN10 grade, an uncoated cemented carbide formulation intended for balanced wear resistance and toughness. Its tolerance class G is designed for consistent fit and repeatable positioning in standard toolholders. Although the grade is described as catalogue-dependent in its exact formulation, users are advised to verify the material suitability against the manufacturer’s product matrix to match workpiece materials and cutting parameters — this step ensures the expected tool life and surface quality are achieved. Practical integration and application guidance When integrating this insert into a tool system, select a compatible holder sized for the DCGT geometry and ensure correct clamping to maintain insert stability. The DCGT11T308-FN2 designation indicates the insert family and chipbreaker variant for easy ordering and replacement. For recommendations on cutting data, clamping torque and suitable holders, Metav Werkzeuge can provide tailored advice and stock information so the insert performs reliably within the specific production context. Contact Metav Werkzeuge for tailored application guidance on the Walter Tools DCGT11T308-FN2 WN10 insert or to request stock and delivery information — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: DCGT11T308-FN2-WN10-WALTER Designation: DCGT11T308-FN2 WN10 Product type: Turning indexable insert Brand: Walter Tools Facts Insert size: 11 Thickness: T3 Relief angle: 7° Corner radius: 0.8 mm Special features Grade: WN10 (uncoated carbide) Chipbreaker: FN2 Plate form: Rhombus 55° Series: Walter Schneidstoffsorte - Serie offen Tolerance class: G Material: Catalogue-dependent FAQ What cutting tasks is this insert intended for? The DCGT11T308-FN2 WN10 turning insert is intended for general turning operations where stable chip formation and dependable edge performance are required; its Rhombus 55° geometry and FN2 chipbreaker support a wide range of routine turning applications. Is the WN10 grade coated or uncoated, and what does that mean? WN10 is an uncoated carbide grade; this means the substrate provides the cutting properties rather than a surface coating, offering balanced toughness and wear resistance suited to varied turning conditions — check the product matrix for exact material recommendations. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker is designed to produce controlled chip shapes that evacuate reliably, reducing the likelihood of chip-related stoppages and supporting consistent surface quality during turning. Can this insert be used for stainless or hardened steels? Material suitability depends on the specific WN10 formulation and the intended application; the product notes advise verifying compatibility against the manufacturer’s matrix before use to ensure optimal performance with particular steels or alloys. What does the designation DCGT11T308-FN2 indicate? The designation denotes the insert family (DCGT), nominal size and shape (11, Rhombus 55°), thickness (T3), corner form (08 → 0.8 mm radius) and the FN2 chipbreaker variant, which helps with ordering and selecting matching toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for identification purposes only. There is no affiliation between Metav Werkzeuge and the named brands; the offered article is an original, new product from the respective manufacturer.
DCGT11T308-FN2 WNN10 WNN10 Wendeplatten - Walter Tools
Compact, coated carbide insert with a defined FN2 chipbreaker and Rhombus 55° geometry for stable chip control and predictable tool life. Benefit from consistent finishes and reproducible edge performance — order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. DCGT11T308-FN2 WNN10 — Turning indexable insert, FN2 chipbreaker, Rhombus 55° (Walter Tools) The DCGT11T308-FN2 WNN10 is a coated carbide turning insert designed for general turning operations where consistent chip formation and reliable cutting-edge life are required. Coated carbide grade WNN10 FN2 chipbreaker for secure chip control Rhombic 55° geometry for versatile turning 0.8 mm corner radius for consistent finishes Engineered for consistent chip control and productivity The insert combines a coated carbide grade (WNN10) with a dedicated FN2 chipbreaker, resulting in improved chip control and reduced risk of built-up edge in many turning tasks. The chipbreaker geometry helps to break and evacuate chips reliably, which in turn lowers downtime for chip management and supports higher process stability. For production environments this translates into more predictable cycles and fewer interruptions, enhancing overall throughput. Geometry and edge specification for reproducible surface quality The Rhombus 55° shape and a corner radius of 0.8 mm provide a balance between cutting strength and accessible cutting edge for finishing operations. The insert’s free angle of 7° supports cutting without excessive rubbing, helping to maintain a cleaner surface on the workpiece. The defined geometry reduces vibration sensitivity and helps to achieve repeatable surface quality across batches, which is particularly relevant when tight tolerances and consistent finishes are required. Material grade and recommended application range The Walter Tools grade WNN10 is a coated carbide class aimed at broad material coverage; suitability for specific workpiece materials should be checked against a product matrix or machining data sheet. The insert’s performance characteristics make it suitable for a wide range of turning tasks where stable edge life and efficient material removal are priorities. When matching insert grade to workpiece material, consider cutting speed and feed to optimise tool life and part quality. Practical advantages for workshop operations Using a standard ISO-style insert such as this reduces tool inventory complexity and simplifies toolholder selection. The DCGT11T308-FN2 WNN10 format supports fast index changes and straightforward replacement, lowering set-up time during batch transitions. Clear identification of grade, chipbreaker and geometry aids planning and ensures that machinists can reproduce cutting strategies with confidence, thereby supporting consistent production results and process repeatability. For procurement, technical selection or fast delivery of Walter Tools turning inserts such as the DCGT11T308-FN2 WNN10, contact Metav Werkzeuge for tailored advice and order processing. Technical Data Article number: DCGT11T308-FN2-WNN10-WALTER Label: Drehwendeschneidplatte DCGT11T308-FN2 WNN10 Walter Tools Product type: Drehwendeschneidplatte Brand: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Free angle: 7° Corner radius: 0.8 Inscribed circle / size: 11 Plate thickness: T3 Tolerance class: G Special features Grade: WNN10 Chipbreaker: FN2 Shape: Rhombus 55° Insert designation: DCGT11T308-FN2 ISO designation: DCGT11T308-FN2 WNN10 Material: catalogue-dependent Series note: Sorteneinsatz / Bedeutung: Werkstoffeignung anhand der konkreten Produktmatrix prüfen FAQ What materials is this insert suitable for? The DCGT11T308-FN2 WNN10 is a coated carbide insert from Walter Tools; the WNN10 grade is intended for a broad material range, but the exact suitability should be verified against the manufacturer’s product matrix for the specific workpiece material. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker on this turning insert guides chip formation to ensure secure chip control and evacuation, which reduces interruptions and supports a stable cutting process when using the DCGT11T308-FN2 WNN10. What surface finish can be expected with a 0.8 mm corner radius? A corner radius of 0.8 mm balances cutting strength and finish capability; it allows consistent surface quality while maintaining edge robustness for moderate finishing and semi-finishing operations. Is the insert geometry compatible with standard toolholders? The rhombic 55° shape follows common ISO insert conventions, making the DCGT11T308-FN2 WNN10 compatible with a wide range of standard turning toolholders designed for 55° rhombic inserts. How to select cutting data for this grade? Cutting speeds and feeds depend on the workpiece material and machining strategy; refer to Walter Tools’ machining recommendations for the WNN10 grade and adjust parameters to balance tool life and productivity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names belong to their respective owners and are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
DCGT11T308-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver series and the WSM01 coated carbide grade for secure chip formation and extended edge life; order the insert directly via Metav Werkzeuge or consult our specialists for process setup. DCGT11T308-MM4 WSM01 indexable turning insert – Tiger‑tec Silver, for stainless steels and superalloys | Walter Tools The DCGT11T308-MM4 WSM01 is an indexable turning insert engineered for machining stainless steels and heat‑resistant superalloys, offering robust edge stability in demanding turning operations. Tiger‑tec Silver series for enhanced wear resistance WSM01 coated carbide for heat resistance Rhombic 55° geometry for stable cutting Chipbreaker MM4 for reliable chip control Increased process reliability when machining tough alloys The WSM01 grade is a coated carbide formulation optimised for materials that generate high temperatures and tend to work‑harden, such as stainless steels and superalloys. This composition supports a stable cutting edge and consistent chip formation, which reduces unplanned tool changes and improves overall throughput. Because the grade is designed to manage heat and edge stress, operators benefit from predictable tool life and fewer interruptions during continuous production runs. Geometry tailored for repeatable accuracy and edge strength The Rhombic 55° shape combined with a 0.8 mm corner radius and 7° clearance produces a balance of strength and accessibility for a wide range of turning profiles. The moderate corner radius increases edge robustness for interrupted cuts, while the clearance angle reduces rubbing and workpiece heating. These geometrical parameters enable quieter cutting, better surface finishes and reduced rework, translating technical geometry into measurable shop‑floor advantages. Controlled chips and thermal stability for safer machining Equipped with the MM4 chipbreaker and part of the Tiger‑tec Silver series, the insert manages chips reliably across varying feed rates and depths of cut. The chipformer design promotes short, consistent chips that are evacuated cleanly from the cutting zone, lowering the risk of entanglement and machine downtime. The series’ surface engineering enhances thermal resistance and protects the cutting edge against adhesive wear, which supports longer intervals between indexings. Practical benefits for workshop productivity and integration The insert’s nominal size and standard mounting allow straightforward integration into common toolholder systems, providing flexibility in tooling setups and simpler inventory management. Combining a high‑performance grade with a purpose‑built chipbreaker yields lower unit costs through extended tool life and fewer stoppages. For specification matching, tooling advice or to request batch availability, contact Metav Werkzeuge; the Walter Tools insert DCGT11T308-MM4 WSM01 is offered for professional machining requirements where consistency and process security matter most. Contact Metav Werkzeuge today to discuss Walter Tools Tiger‑tec Silver inserts and secure optimised cutting parameters and delivery options for stainless steel turning applications Technical data Article number: DCGT11T308-MM4-WSM01-WALTER Designation: DCGT11T308-MM4 WSM01 Type: indexable turning insert Series: Tiger‑tec Silver Grade: WSM01 Manufacturer: Walter Tools Dimensions & core data Insert size: 11 mm Corner radius: 0.8 mm Thickness: T3 Clearance angle: 7° Shape: Rhombus 55° Materials & special features Coating / type: Tiger‑tec Silver Chipbreaker: MM4 Suitable for: stainless steels (M), superalloys / titanium (S) Tolerance class: G Edge form: 0.8 mm radius, Rhombic 55° FAQ Which materials is this insert designed to machine? The answer: The DCGT11T308-MM4 WSM01 is formulated for stainless steels (M) and heat‑resistant superalloys or titanium (S), using the WSM01 grade to support stable cutting under thermal load. What are the key geometry features that influence performance? The rhombic 55° shape combined with a 0.8 mm corner radius and 7° clearance provides a strong cutting edge and good access to turned profiles, promoting repeatable surface quality with reduced edge wear. How does the MM4 chipbreaker improve machining? The MM4 chipbreaker produces short, controllable chips that evacuate reliably from the cutting zone, lowering the risk of chip related interruptions and improving overall process security for turning operations. Is this insert compatible with standard toolholders? Yes, the insert’s standard designation and size permit use in common turning toolholders designed for DCGT‑style indexes, enabling straightforward retrofit into existing tooling systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGT11T308-MM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of a wear-resistant Tiger‑tec Silver grade and a chipbreaking geometry that supports secure machining of demanding materials; the result is dependable tool life and consistent component quality. Order supply directly via Metav Werkzeuge or consult the team for cutting data and application advice. DCGT11T308-MM4 WSM10S turning insert — 0.8 mm corner radius, Tiger‑tec Silver — Walter Tools A DCGT11T308-MM4 WSM10S turning insert designed for heavy-duty turning of rostfreier Stahl and heat-resistant superalloys, offering a robust edge and controlled chip flow for productive machining. Tiger‑tec Silver coated grade WSM10S Suitable for rostfreier Stahl and superalloys Rhombic 55° shape for versatile approach angles Chipbreaker MM4 for reliable chip control High‑performance grade for demanding materials The WSM10S grade, produced in the Tiger‑tec Silver family, is a coated carbide formulation developed for challenging turning tasks. Its coating and substrate combination promote stable chip formation and improved resistance to edge degradation when machining materials that tend to work‑harden or produce heavy built‑up edge. For shops processing rostfreier Stahl or heat‑resistant superalloys, the material pairing means fewer unscheduled tool changes and more predictable production runs. The grade designation follows industry practice and helps when selecting the correct insert class for specific ISO material groups. Geometry engineered for repeatable surface quality The insert’s Rhombus 55° form and 7° clearance angle provide a balanced cutting geometry that reduces flank rubbing while allowing angular approach flexibility in many turning set‑ups. The 0.8 mm corner radius offers a compromise between edge strength and surface finish: it supports reliable performance on interrupted cuts while still enabling acceptable component roughness. The integrated MM4 chipbreaker actively shapes and breaks chips to reduce entanglement and support consistent evacuation, which benefits cycle stability and machine uptime. The designation T3 thickness and size 11 make this insert compatible with common turning toolholders designed for this family of indexable plates. Production benefits and application areas In production contexts where process security and repeatability are priorities, this insert offers a pragmatic solution: the coated grade and chipbreaking geometry together reduce tendencies for adhesive wear and ensure predictable cutting forces. Typical applications include medium to heavy turning of rostfreier Stahl and high‑temperature superalloys where thermal loads and material ductility challenge the cutting edge. Choosing this insert supports longer intervals between regrinds or indexings, which contributes to lower machining costs per component and steadier throughput. For technical questions about cutting parameters or toolholder matching, Metav Werkzeuge can provide tailored recommendations and documented cutting data to aid implementation. Speak to Metav Werkzeuge for tailored cutting data and rapid supply of the Walter Tools DCGT11T308-MM4 WSM10S Tiger‑tec Silver turning insert for demanding rostfreier Stahl and superalloy applications Technical data SKU: DCGT11T308-MM4-WSM10S-WALTER Article designation: DCGT11T308-MM4 WSM10S Manufacturer: Walter Tools Product type: Turning insert Series: Tiger‑tec Silver Facts Clearance angle: 7° Corner radius: 0.8 mm Plate size: 11 Plate form: Rhombus 55° Thickness: T3 Tolerance class: G Special features Grade: WSM10S Coating/technology: Tiger‑tec Silver Chipbreaker: MM4 Material suitability: S / M (superalloys and rostfreier Stahl) Execution: T Shape designation: DCGT11T308-MM4 FAQ Which materials are appropriate for this insert? The DCGT11T308-MM4 WSM10S turning insert is suitable for machining rostfreier Stahl (ISO group M) and heat‑resistant superalloys (ISO group S), offering a coated carbide grade engineered for these material classes. What does the WSM10S grade indicate? WSM10S is a Walter Tools grade within the Tiger‑tec Silver family; it denotes a coated, wear‑resistant carbide designed to maintain edge stability and support secure chip formation when turning difficult materials. How does the MM4 chipbreaker influence machining? The MM4 chipbreaker on this insert actively controls chip form and breakage, lowering the risk of long, stringy chips, improving evacuation, and contributing to steady cutting conditions that support surface quality and tool life. How do geometry and clearance affect surface finish and tool life? The Rhombus 55° geometry and 7° clearance reduce flank contact and allow favourable approach angles, while the 0.8 mm corner radius balances edge robustness with surface finish—together these features help achieve repeatable component quality and predictable wear behaviour. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product of Walter Tools.
DCGT11T308-MM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver thermal stability, precise MM4 chip control and a robust Rhombic 55° geometry for consistent, high-quality turning of stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or request a technical consultation if required DCGT11T308-MM4 WSM20S turning insert — Tiger·tec Silver, 0.8 mm corner radius — Walter Tools DCGT11T308-MM4 WSM20S is a rhombic 55° indexable turning insert engineered for machining stainless steels and heat‑resistant superalloys (ISO groups M and S) in demanding industrial applications Tiger·tec Silver coating for thermal stability Optimised for stainless steels and superalloys Rhombic 55° form with 0.8 mm corner radius MM4 chipformer for reliable chip control High thermal stability for demanding materials The DCGT11T308-MM4 WSM20S indexable insert combines the Tiger·tec Silver coating with a coated carbide substrate to resist heat and preserve edge integrity under heavy cutting loads. This grade, WSM20S, is designed specifically for stainless steels and heat‑resistant superalloys and titanium, materials that typically cause high temperatures and work hardening. The result is stable cutting edges and longer tool life, which directly supports higher productivity and fewer tool changes during series production. Geometry that delivers consistent surface quality A Rhombic 55° profile together with a 0.8 mm corner radius and a small 7° relief enables a balanced combination of strength and finishing ability. The moderate corner radius reduces cutting forces while maintaining a dependable cutting edge for semi‑finishing and finishing passes. With a T3 thickness and tolerance class G, the insert offers consistent seating and repeatability in tool holders, contributing to predictable machining results and reduced scrap rates. Chip control and process security The MM4 chipformer is optimised to produce controllable chips when machining tough materials, minimising the risk of built‑up edge and workpiece surface damage. Effective chip control reduces interruptions, keeps the tool path clear and supports higher metal removal rates where appropriate. These features enhance process reliability on automated turning lines and help maintain cycle‑time targets on medium‑ to large‑batch production. Compatibility and application scope Available in an ISO designation that reflects industrial standards, this insert suits a wide range of turning operations where stainless steels and superalloys are encountered. The insert size (designation 11) allows straightforward integration into common turning tool families. Its combination of coating technology and chipformer makes it a suitable choice for job shops and production environments seeking consistent surface finish, edge stability and reduced tooling interventions. Contact Metav Werkzeuge for a tailored process recommendation on the DCGT11T308-MM4 WSM20S — technical specialists at Metav Werkzeuge are available via info@metav-werkzeuge.com or +49 2822 7131930 to advise on grade selection and machining parameters Technical data Article number: DCGT11T308-MM4-WSM20S-WALTER Name: DCGT11T308-MM4 WSM20S Type: Turning insert (indexable) Series: Tiger·tec Silver Grade: WSM20S Manufacturer: Walter Tools Numbers / Core technical data Insert size: 11 Corner radius: 0.8 mm Relief angle: 7° Thickness: T3 Tolerance class: G Designs / Special features Rhombic 55° insert form MM4 chipformer for controlled chips Coated carbide, Tiger·tec Silver technology Suited for stainless steels (M) and superalloys/titanium (S) Robust edge for reliable process security FAQ What materials is this insert best suited for? The DCGT11T308-MM4 WSM20S insert is formulated for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering thermal stability and stable edge life in these materials. How does the MM4 chipformer affect production? The MM4 chipformer on this turning insert improves chip control during machining, reducing interruptions and helping maintain consistent cycle times and surface integrity. Which features improve repeatability in production? Features such as the Rhombic 55° geometry, 0.8 mm corner radius, T3 thickness and tolerance class G ensure stable seating and repeatable cutting performance across tool changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGT11T308-MN2 WN10 Wendeplatten - Walter Tools
Combine the reliable performance of uncoated carbide with a robust MN2 chipbreaker and a 7° clearance angle for consistent turning results; order the insert via Metav Werkzeuge or consult the technical team for application advice. DCGT11T308-MN2 WN10 turning insert by Walter Tools — Rhombic 55°, 7° clearance The DCGT11T308-MN2 WN10 is an uncoated carbide indexable turning insert designed for general turning operations; suitability for specific workpiece materials should be checked in the product matrix. Rhombic 55° insert form 7° clearance angle for secure cutting 0.8 mm corner radius for edge strength MN2 chipbreaker for stable chip control Consistent cutting geometry that improves process stability The insert’s Rhombic 55° form and 7° clearance angle combine to deliver a balanced edge geometry that supports repeatable turning operations. The moderate 0.8 mm corner radius increases edge strength and reduces the risk of premature chipping during interrupted cuts, while the MN2 chipbreaker assists in producing predictable chip shapes. For production environments, these geometry features translate into fewer tool changes and steadier surface quality, especially when processing general engineering materials. The DCGT designation indicates compatibility with standard toolholders for this insert family. Product matrix guidance for correct material selection This grade, listed as WN10, is an uncoated carbide composition; the series is described as an open Walter carbide line. As the workpiece suitability depends on the specific application matrix, material compatibility should be verified against the manufacturer's product matrix. Selecting the correct carbide grade based on component material and cutting data helps to optimise tool life and reduce process costs. Uncoated grades like this are often economical for a wide range of turning tasks where a balance of wear resistance and reliability is required. Integration into tool systems and mechanical benefits With a designation reflecting an insert size of 11 and a plate thickness of T3, the insert is intended for standard indexable turning systems. The tolerance class G supports repeatable seating and clamping accuracy in compatible holders, contributing to dimensional consistency across batches. Where fixture and holder compatibility are critical, the standard DCGT geometry facilitates rapid replacement and indexation, helping to maintain cycle times without complex adjustments. Practical recommendations for workshop use For machining planners and production engineers, the combination of a clear chip control geometry and a robust corner radius makes this insert suitable for a variety of turning operations under typical workshop conditions. Given the open-series nature of the Walter grade, it is sensible to test the insert under representative cutting conditions and to consult the Walter product matrix for recommended cutting parameters. Technical inquiries and detailed cutting data are available from the supplier for process optimisation and to confirm the insert’s fit for particular materials or component geometries. Contact Metav Werkzeuge for personalised application advice and to source Walter Tools DCGT11T308-MN2 WN10 inserts directly; technical consultants are available by phone or email. Technical data Article number / SKU: DCGT11T308-MN2-WN10-WALTER Product type: Turning indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen ISO designation: DCGT11T308-MN2 WN10 Core data Size: 11 Thickness: T3 Clearance angle: 7° Corner radius: 0.8 mm Tolerance class: G Special features Chipbreaker: MN2 Grade: WN10 (uncoated carbide) Insert form: Rhombic 55° Material specification: catalogue-dependent FAQ What materials is this insert suitable for? Material suitability depends on the Walter grade matrix; the DCGT11T308-MN2 WN10 is an uncoated carbide grade and its use should be verified against the product matrix for the intended workpiece material. Can the DCGT11T308-MN2 WN10 be indexed for multiple cutting edges? Yes, the insert’s DCGT geometry is designed for indexable turning systems, allowing multiple edge positions to be used before replacement. What does the MN2 chipbreaker provide in practice? The MN2 chipbreaker on this insert supports predictable chip control and stable chip formation, which helps maintain surface finish and reduces the need for manual chip handling. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge robustness and improves resistance to chipping, making the insert more tolerant to varying cutting conditions and interrupted cuts. Is the WN10 grade coated or uncoated? The WN10 grade is an uncoated carbide as indicated in the product series description; this influences wear behaviour and cost-efficiency depending on the application. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DCGT11T308-MN2 WNN10 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, precise geometry and flexible grade selection for consistent turning results; order directly via Metav Werkzeuge or request application advice from the consultants. DCGT11T308-MN2 WNN10 – Turning insert, Rhombus 55° / MN2 chipbreaker by Walter Tools DCGT11T308-MN2 WNN10 is a coated carbide turning insert designed for medium-duty turning operations where predictable chip control and repeatable tool life are required *Coated carbide grade WNN10 *MN2 chipbreaker for controlled chips *Rhombus 55° insert geometry *0.8 mm corner radius Precision and consistent chip control for reliable turning The DCGT11T308-MN2 WNN10 insert combines a coated carbide grade with a purpose-designed MN2 chipbreaker, providing predictable chip formation in a wide range of general turning tasks. The MN2 geometry promotes manageable, medium-sized chips, which reduces interruptions from chip entanglement and contributes to more stable cycle times. The insert’s rhombic 55° shape offers good access in shoulder and profile turning, while the 0.8 mm corner radius supports edge strength and surface finish. For production environments seeking to improve throughput, this turning insert delivers measurable operational benefits while remaining simple to implement in standard toolholders. Geometry and angles that support machining accuracy The insert’s 7° relief angle and rhombic platform give a balanced combination of edge engagement and clearance, helping to maintain consistent cutting forces and reduce the risk of rubbing. The medium corner radius smooths cutting transitions and assists in achieving a good surface quality without compromising edge life. Where tolerance stability matters, the insert’s defined geometry enables repeatable tool setting and predictable wear progression. In practice, this means fewer rejects and more consistent part quality across batches when the insert is used within its intended application window. Material grade and series: predictable performance and application guidance The WNN10 grade is a coated hardmetal designed for a broad spectrum of turning tasks; application suitability should be verified against the product matrix for specific workpiece materials. The open Walter grade series provides a pragmatic balance between wear resistance and toughness, supporting stable chip formation and extended tool life in everyday workshop and industrial operations. Where process security and regular output are priorities, an insert with this coating and chipbreaker combination can reduce unplanned interventions and support more predictable maintenance cycles. Practical benefits for the workshop and production floor Using a rhombic insert with a dedicated chipbreaker simplifies tool inventory and holder setup because the same basic geometry fits many standard toolholders and turning applications. The T3 thickness of the insert contributes to edge robustness while keeping cutting engagement manageable; combined with the MN2 chip control, the system helps to lower the chance of tool-induced surface defects. For operations that require dependable performance and simplified tool management, this insert offers a pragmatic route to improved productivity and fewer process disturbances. Contact Metav Werkzeuge for application advice, availability and to discuss how Walter Tools inserts fit specific production needs; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DCGT11T308-MN2-WNN10-WALTER Designation: DCGT11T308-MN2 WNN10 Product type: Turning insert Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Relief angle: 7° Insert size: 11 mm Thickness: T3 Special features Chipbreaker: MN2 Grade: WNN10 (coated carbide) Form: Rhombus 55° Series: Walter grade series (open) Tolerance class: G Material specification: Catalog-dependent FAQ What is the primary purpose of the MN2 chipbreaker? The MN2 chipbreaker on the DCGT11T308-MN2 WNN10 is designed to produce medium-sized, controllable chips that reduce entanglement and support continuous machining without frequent interruptions Can this insert be used in standard toolholders for 55° rhombic inserts? Yes, the rhombic 55° geometry of the turning insert fits conventional holders designed for RC/55-style inserts and enables straightforward integration into existing tooling systems What does the WNN10 grade mean in practice? WNN10 denotes a Walter coated carbide grade tailored for balanced wear resistance and toughness; suitability for specific materials should be checked against the product matrix before selection How does the 0.8 mm corner radius affect surface finish? A 0.8 mm corner radius stabilises the cutting edge, which can enhance surface finish and reduce the risk of chipping compared with very sharp radii during medium-duty turning Is the coating type specified for the insert? The coating for this insert is listed as catalog-dependent; refer to the Walter product matrix or Metav Werkzeuge for the precise coating option available for this SKU Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
DCGT11T308-MN2 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver grade and the WSM01 cutting grade for secure chip formation and stable cutting edges when machining stainless steels and heat‑resistant superalloys; order the insert directly via Metav Werkzeuge or consult the technical team for tailored application advice. DCGT11T308-MN2 WSM01 turning insert – Tiger‑tec Silver, for stainless steels & superalloys (Walter Tools) The DCGT11T308-MN2 WSM01 is a rhombic 55° coated carbide turning insert from the Tiger‑tec Silver series, engineered for demanding turning tasks in rostfreie and heat‑resistant alloys. Tiger‑tec Silver grade for high process security MN2 chipbreaker for reliable chip control 0.8 mm nose radius for reproducible part finishes Positive 7° relief angle for stable cutting edges High‑performance grade for demanding materials The Tiger‑tec Silver series with the WSM01 grade combines a wear‑resistant coated carbide base with a formulation tuned to the thermal and mechanical challenges of stainless steels and superalloys. This turning grade supports secure chip formation under high temperatures and reduced adhesion at the cutting edge, which lowers the risk of built‑up edge and extends productive tool life. The formulation is particularly suitable where heat resistance and edge stability are decisive for consistent component quality. Geometry and chip control that stabilise machining The combination of a rhombic 55° shape, MN2 chipbreaker and a 0.8 mm nose radius delivers precise contact conditions and controlled chip flow during turning. The moderate nose radius balances surface finish and edge strength for repeated, reliable cuts, while the chipbreaker geometry evacuates chips effectively in continuous and light interrupted cuts. The positive 7° relief angle reduces cutting forces and helps maintain a sharp edge, which is advantageous for long runs on challenging materials. Practical benefits and selection guidance for production The DCGT11T308-MN2 WSM01 insert is supplied in a T3 thickness and meets tolerance class G, ensuring compatibility with standard turning toolholders and predictable seating accuracy. For applications in rostfreie steels and nickel‑based alloys, this insert offers a pragmatic compromise between edge durability and surface integrity; selecting the correct cutting parameters (reduced feed for heavy alloy work and appropriate coolant strategies) will enhance tool life. The design supports productive turning with repeatable results and reduced rework. Contact Metav Werkzeuge today for application support or to request available packing and delivery options for this Walter Tools turning insert; Metav Werkzeuge provides expert advice to match cutting data to material and machine capability. Technical Data SKU: DCGT11T308-MN2-WSM01-WALTER ISO designation: DCGT11T308-MN2 WSM01 Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Relief angle: 7° Nose radius: 0.8 mm Insert size: 11 Thickness: T3 Tolerance class: G Special features Cutting grade: WSM01 (coated carbide) Chipbreaker: MN2 Shape: rhombic 55° Material suitability: stainless steels (M), superalloys/titanium (S) FAQ What materials is this insert suitable for? The DCGT11T308-MN2 WSM01 insert from Walter Tools is formulated for stainless steels and heat‑resistant superalloys, reflecting the M and S ISO material groups. How does the MN2 chipbreaker affect machining performance? The MN2 chipbreaker on this turning insert controls chip form and evacuation, reducing cutting interruptions and supporting steady machining in continuous turning operations. Which toolholder type is compatible with this insert? This rhombic 55° format fits standard DIN/ISO toolholders designed for DCGT‑style inserts; consult holder manufacturer guidelines for clamping torque and seating to match DCGT11T308‑type geometry. Is the insert supplied with a specific tolerance or grade information? The insert meets tolerance class G and is specified as a coated carbide grade WSM01 within the Tiger‑tec Silver series, ensuring consistent dimensional and cutting performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned only for explanation; there is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the respective manufacturer.
DCGT11T308-MP4 WPP10G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coated carbide and the WPP10G grade ensures long tool life and reliable chip control for steel turning; the Rhombic 55° geometry with a 0.8 mm corner radius gives consistent surface quality and tool stability. Order the DCGT11T308‑MP4 WPP10G turning insert directly via Metav Werkzeuge or ask our consultants if needed. DCGT11T308‑MP4 WPP10G turning insert — Tiger·tec Gold, MP4 chipbreaker (Walter Tools) The DCGT11T308‑MP4 WPP10G is a coated carbide turning insert optimised for machining steels, combining a Tiger·tec Gold finish with an MP4 chipbreaker for controlled chip formation in general turning applications. Tiger·tec Gold coating for extended edge life Designed for steel machining (P group) MP4 chipbreaker for controlled chip formation Rhombic 55° geometry with 0.8 mm radius Maximise productivity with a durable coated grade The insert's Tiger·tec Gold coating and WPP10G grade are engineered to deliver stable cutting performance under typical steel cutting conditions. The coated carbide substrate reduces flank wear and maintains cutting-edge integrity over longer cycles, which translates into fewer tool changes and improved machine uptime. Thanks to the MP4 chipbreaker, chip formation is predictable, helping to reduce interruptions and maintain consistent cycle times during medium to high-volume turning operations. Geometry and edge design that improve surface finish The rhombic 55° geometry combined with a 0.8 mm corner radius offers a beneficial balance between strength and accessibility: the geometry allows entry into confined profiles while the radius supports a robust cutting edge for finishing passes. This configuration promotes repeatable dimensional accuracy and better surface quality on workpieces made from steels. The insert's form factor also helps to distribute cutting forces evenly, contributing to a stable process even when encountering variations in workpiece material. Practical application guidance for efficient machining Designed specifically for the ISO P material group, this insert is suitable for unalloyed and alloyed steel machining where reliable chip control and tool life are priorities. The insert thickness class and rhombic shape make it suitable for both conventional and CNC lathes when used with appropriate toolholders. For process set-up, select feeds and depths consistent with general steel turning practice and rely on the chipbreaker to break and evacuate chips effectively; this supports uninterrupted production and safer handling at the tool post. Enquire with Metav Werkzeuge for cutting data and tooling sets to exploit Tiger·tec Gold performance in steel turning; our consultants will advise on grade selection and optimisation. Technical data Article number: DCGT11T308-MP4-WPP10G-WALTER Designation: DCGT11T308-MP4 WPP10G Product type: Turning insert Manufacturer: Walter Tools Facts Size: 11 Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: T3 Tolerance class: G Special features Coating/series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MP4 Geometry: Rhombic 55° Material application: Steel (ISO P) FAQ What materials is this insert suitable for? The DCGT11T308‑MP4 WPP10G is specified for the ISO P material group and is suitable for machining unalloyed and alloyed steel. What does the WPP10G grade signify? WPP10G denotes Walter Tools' coated carbide grade within the Tiger·tec Gold technology, optimised for wear resistance and stable performance in steel turning. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker controls chip formation to promote short, manageable chips and consistent evacuation, supporting uninterrupted cutting and safer handling at the tool post. Which operations benefit most from the rhombic 55° shape and 0.8 mm radius? The rhombic 55° geometry with a 0.8 mm corner radius is well suited to general turning where a balance of edge strength and accessibility is required, particularly for finishing and light to medium shoulder work. Is this insert appropriate for high-volume production? Yes; the combination of Tiger·tec Gold coating and the WPP10G grade provides enhanced tool life and repeatable performance, making it a practical choice for production-focused turning of steels. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is original, new and supplied by the manufacturer Walter Tools.
DCGT11T308-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the wear‑resistant WPP20G carbide grade for longer tool life and consistent process security; the rhombic 55° geometry with MP4 chipbreaker improves chip control in steel machining. Order inserts directly via Metav Werkzeuge or consult the tooling specialists for application-specific recommendations. DCGT11T308-MP4 WPP20G turning indexable insert — Tiger‑tec Gold, for steel — Walter Tools The DCGT11T308-MP4 WPP20G is a rhombic 55° turning insert with Tiger‑tec Gold coating, designed for efficient machining of steels (ISO P). Tiger·tec Gold coated grade WPP20G Rhombic 55° geometry, 0.8 mm corner radius Optimised chip control with MP4 breaker 7° clearance angle for consistent cutting Suitable for steel machining (ISO P) Longer tool life and stable cutting through advanced coating The combination of the Tiger‑tec Gold coating and the WPP20G grade provides increased wear resistance and thermal stability, resulting in more consistent cutting performance and fewer tool changes. Coated carbide technology reduces flank wear and edge degradation during medium to high cutting speeds, which supports a measurable improvement in productivity and repeatability for serial and batch production. This technical advantage is particularly relevant where process reliability and surface quality are critical. Improved chip formation and reduced cycle times with MP4 design The MP4 chipbreaker and the rhombic 55° geometry offer controlled chip segmentation and reliable evacuation, minimising interruptions caused by poor chip flow. With a 0.8 mm corner radius and the Rhombus 55° form, the insert balances strength at the cutting edge with the ability to produce stable cuts across varied steel grades. The result is a reduction in secondary operations and shorter cycle times through fewer tool interventions, which directly benefits overall machining efficiency. Robust geometry and straightforward integration for steel applications With a 7° clearance angle and T3 plate thickness, the insert is dimensioned for secure seating in standard toolholders and for robust contact under typical turning loads. Classified for steel (ISO P), the design addresses common challenges in steel turning—heat development and chip control—by pairing the coating and grade with a geometry that resists chipping and maintains surface finish. The insert is suitable for versatile turning tasks, from light finishing to productive semi‑finishing, offering a practical balance of performance and tool life. Contact Metav Werkzeuge to specify Walter Tools Tiger‑tec Gold inserts for steel machining and to arrange a cutting test tailored to the application — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DCGT11T308-MP4-WPP20G-WALTER Designation: DCGT11T308-MP4 WPP20G Product type: Turning indexable insert Brand: Walter Tools Facts Plate size: 11 Corner radius: 0.8 mm Clearance angle: 7° Plate form: Rhombus 55° Plate thickness: T3 Tolerance class: G Special features Coated carbide grade WPP20G Tiger‑tec Gold series MP4 chipbreaker Suitable for steel (ISO P) Execution: T FAQ What materials is this insert suited for? The DCGT11T308-MP4 WPP20G insert is designed for machining steels (ISO P) and is optimised for the heat and chip formation typical of steel turning. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold on the WPP20G grade provides enhanced wear resistance and thermal stability, which extends insert life and supports consistent surface quality in serial machining. What does the MP4 chipbreaker do? The MP4 chipbreaker improves chip segmentation and evacuation, reducing the risk of tangled chips and helping to maintain uninterrupted machining cycles. Is the geometry suitable for both roughing and finishing? Yes, the rhombic 55° form with a 0.8 mm corner radius offers a compromise of cutting edge strength and versatility that supports semi‑finishing and light finishing operations. Can this insert be used in standard toolholders? The DCGT11T308-MP4 WPP20G is dimensioned for conventional turning toolholders that accept rhombic 55° indexable inserts and T3 thicknesses. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are used for explanation only and do not imply any affiliation between Metav Werkzeuge GmbH and the mentioned manufacturers. The offered article is original, brand‑new factory merchandise.
DCGT11T308FS-1 WDN10 WDN10 Wendeplatten - Walter Tools
High wear resistance from the polycrystalline diamond grade and a precise 0.8 mm corner radius combine to deliver consistent part quality; the rhombic 55° geometry and 7° clearance support stable cutting and predictable tool life. Order the insert via Metav Werkzeuge or request application advice from the technical team. DCGT11T308FS-1 WDN10 — Rhombic 55° PCD indexable insert by Walter Tools The DCGT11T308FS-1 WDN10 is a rhombic 55° indexable insert with a polycrystalline diamond grade, engineered for high-wear turning of abrasive, non‑ferrous materials Polycrystalline diamond grade WDN10 Rhombic 55° geometry for versatile turning 0.8 mm corner radius for precise edges 7° clearance angle, T3 thickness Exceptional wear resistance for abrasive, non‑ferrous workpieces The polycrystalline diamond grade WDN10 provides very high wear resistance, making the insert particularly suitable for machining abrasive, non‑ferrous materials where conventional carbide wears rapidly. Polycrystalline diamond (PCD) consists of a bonded diamond layer on a substrate, which delivers long service life and a stable cutting edge. This stability directly translates into consistent surface finish and fewer part rejections in serial production. The grade selection supports processes where abrasive inclusions or silica‑rich alloys would otherwise shorten tool life; however, the specific suitability should be verified against the product matrix for the intended material and cutting conditions. The result is lower tooling consumption and reduced process variability when the grade is matched to the application. Geometry designed for precision and repeatability The rhombic 55° shape combined with a 0.8 mm corner radius gives a robust edge that balances sharpness and strength, supporting dimensional accuracy across long runs. The 7° clearance angle reduces rubbing on the flank, improving heat control at the cutting zone and aiding chip flow when paired with the integrated chipbreaker. With a T3 plate thickness and the standard chipbreaker designation, the insert offers reliable seat stability in compatible toolholders and predictable wear patterns that facilitate consistent reindexing. These geometric characteristics help to maintain component tolerances and surface integrity, while the controlled edge form reduces the need for frequent inspection and adjustment, contributing to smoother production cycles. Process benefits: productivity, predictability and support When integrated into a machining cell, the insert’s combination of PCD performance, stable geometry and repeatable edge life supports measurable productivity gains and reduced downtime. Longer tool life lowers intervention frequency and inventory turnover for cutting edges, improving overall equipment effectiveness. The Walter Tools grade and series are engineered for productive material removal and stable chip control; machining parameters should be set according to the material and machine capability to achieve the best economy per component. For applications where material composition or abrasiveness is uncertain, consultation of the product matrix is advised to confirm the optimal grade and cutting data. The DCGT11T308FS-1 WDN10 insert is a technical solution for businesses seeking reproducible results and lower tooling-related variability. For selection guidance, availability and tailored application advice on Walter Tools PCD inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss the DCGT11T308FS-1 WDN10 and its suitability for specific production tasks. Technical Data Article number: DCGT11T308FS-1-WDN10-WALTER Designation: DCGT11T308FS-1 WDN10 Manufacturer: Walter Tools Facts Geometry: Rhombus 55° Corner radius: 0.8 mm Clearance angle: 7° Plate size: 11 Plate thickness: T3 Chipbreaker: 1 Tolerance class: G Special features Cutting material: polycrystalline diamond (PCD) Grade: WDN10 (Walter Tools series) Intended use: abrasive, non‑ferrous materials (check product matrix) Series description: Walter Schneidstoffsorte – Serie offen FAQ What materials is this insert intended for? The insert is supplied in the PCD grade WDN10, intended primarily for abrasive, non‑ferrous materials; suitability for a specific alloy should be confirmed via the product matrix and cutting data. What does the WDN10 designation indicate? WDN10 is a Walter Tools grade name for a polycrystalline diamond (PCD) cutting material optimised for wear resistance in non‑ferrous and abrasive applications. Which geometric specifications are relevant for setup? Key specifications are rhombic 55° geometry, 0.8 mm corner radius, 7° clearance angle, T3 plate thickness and chipbreaker 1 — these determine seating, cutting direction and expected edge life for the DCGT11T308FS-1 WDN10. Is this insert suitable for machining steel or hardened materials? PCD grades such as WDN10 are intended mainly for non‑ferrous and abrasive non‑ferrous work. For steels or hardened alloys, alternative grades or substrates are typically recommended; check the product matrix for confirmed applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned for explanatory purposes only; no affiliation between our company and the named manufacturers is implied. The offered article is an original, factory‑new product of the manufacturer.
DCGT11T308M-FP2 WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of durable cermet performance, precise geometry and reliable chip control for consistent finishing results; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DCGT11T308M-FP2 WEP10C indexable turning insert, Rhombic 55°, 0.8 mm – Walter Tools The DCGT11T308M-FP2 WEP10C is an indexable turning insert engineered for precision finishing and semi-finishing operations, featuring a rhombic 55° shape and an FP2 chipbreaker for controlled chip formation. Walter Cermet grade WEP10C Rhombic 55° insert geometry Corner radius 0.8 mm for fine finishing FP2 chipbreaker for stable chips 7° clearance angle for precise engagement High-precision finishing with a cermet cutting grade The combination of a Walter Cermet series design and the WEP10C grade provides a focused solution for high-quality surface finishes and extended tool life. Cermet-based grades deliver a dense ceramic–metal matrix that reduces flank wear under finishing conditions, which translates into longer intervals between index changes and fewer interruptions on the machine. The result is improved process stability and consistent component quality, making this insert a practical choice for manufacturers seeking reliable finishing performance without sacrificing cycle-time efficiency. The DCGT11T308M-FP2 WEP10C designation denotes the geometry and grade tailored for such tasks. Geometry engineered for stable chip control and surface quality The rhombic 55° form combined with the FP2 chipbreaker manages chip flow while maintaining cutting-edge contact for low-vibration engagement. A 0.8 mm corner radius supports a smooth transition between passes, reducing scallop height and enabling superior surface integrity. Meanwhile, the 7° clearance angle reduces rubbing on the flank, decreasing heat generation and improving dimensional consistency. Together, these geometric parameters ensure that the insert not only cuts precisely but also handles chips predictably, which minimises the need for frequent adjustments and contributes to reproducible machining results. Practical machining guidance and benefit-focused performance Although the cermet chemistry and geometry are optimised for finishing, material suitability should be verified against the specific product matrix for each application. The WEP10C grade is designed to offer stable cutting behaviour and improved edge life in finishing regimes; consult the technical matrix for feed and speed recommendations to maximise return on tooling. Using this insert in the recommended operating window reduces downtime, lowers tooling consumption per part and supports improved part-to-part consistency — measurable benefits that justify its integration into high-precision production workflows. Compatibility, handling and process integration With an insert size of 11 and a plate thickness of T3, the component fits commonly used toolholders for rhombic inserts and can be integrated into existing tool systems with minimal modification. The designation includes a tolerance class G, which ensures conformity for repeatable seating and positioning in the clamping pocket. For assembly, ensure the seat is clean and the clamping torque matches the toolholder specification to preserve indexability and repeatability. Clear labelling and SKU tracking support inventory control and help maintain a smooth supply chain within the production environment. For precision finishing with the Walter Cermet WEP10C grade, contact Metav Werkzeuge for tailored advice and rapid availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: DCGT11T308M-FP2-WEP10C-WALTER Article designation: DCGT11T308M-FP2 WEP10C Product type: Indexable turning insert Manufacturer: Walter Tools Series: Walter Cermet Core specifications Insert size: 11 Corner radius: 0.8 mm Clearance angle: 7° Thickness: T3 Shape: Rhombic 55° Tolerance class: G Materials & features Grade: WEP10C (Cermet) Chipbreaker: FP2 Execution: T Material information: Katalogabhängig Notes: Verify material suitability in the product matrix FAQ What applications suit this insert best? The DCGT11T308M-FP2 WEP10C insert from Walter Tools is intended for precision finishing and semi-finishing operations; suitability for specific materials should be checked in the product matrix. Does the insert have a coating? The WEP10C grade is a cermet composition; coating and detailed material information are listed as catalogue-dependent and should be confirmed in the technical documentation. What does the FP2 chipbreaker provide? The FP2 chipbreaker on this rhombic insert improves chip formation and evacuation, offering stable chip control and consistent surface quality during finishing cuts. Which toolholders are compatible with this insert? The insert’s rhombic 55° form and size 11 fit standard holders designed for DCGT-style inserts; ensure the holder accepts T3 thickness and uses the correct clamping torque. How does the 0.8 mm corner radius affect results? A 0.8 mm corner radius smooths the tool path between passes, reducing scallop height and improving surface finish while balancing edge strength for finishing operations. Is the product traceable by SKU? Yes, the SKU DCGT11T308M-FP2-WEP10C-WALTER identifies the specific configuration, facilitating ordering and inventory management. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and forms part of the global Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned solely for explanation purposes. There is no affiliation between our company and the mentioned brands; the offered item is an original, factory-new product from the manufacturer.
DCGT11T308ML-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Die Kombination aus Walter Cermet‑Schneidstoff‑Technologie, dem FX4‑Spanformer und der kompakten Rhombus‑Form sorgt für konstante Oberflächengüten und stabile Spanbildung bei anspruchsvollen Drehoperationen; bestellen direkt über Metav Werkzeuge oder Rückfrage bei den technischen Beratern möglich. DCGT11T308ML-FX4 WEP01C – Indexable turning insert, FX4 chipbreaker, Walter Tools The DCGT11T308ML-FX4 WEP01C is a precision indexable turning insert designed for finishing and semi‑finish turning applications where surface quality and repeatable performance matter most Cermet grade WEP01C for fine finishing FX4 chipbreaker for reliable chip control Rhombus 55° form for versatile clamping 0.8 mm corner radius for consistent surface finish Consistent finishes from a cermet cutting edge The Walter Cermet design places emphasis on dimensional stability and edge integrity, making the insert especially suitable where a fine surface is required. The combination of a cermet grade and the FX4 chipbreaker delivers controlled micro‑chipping resistance and low cutting forces, which reduces vibration and contributes to repeatable part quality. For small‑diameter or light‑cut finishing passes the geometry supports steady cutting conditions and a predictable tool life. Reliable chip control for production stability A defined FX4 geometry promotes short, manageable chips even in interrupted cuts, improving machine uptime and reducing secondary operations. The rhombus 55° shape allows a broad range of insert positions in standard toolholders, which helps maintain consistent contact conditions and process security. Thanks to the 0.8 mm corner radius, surface roughness is lowered without excessive cutting forces, balancing finish and life in a production environment. Geometry and mounting that support process reliability With a 7° clearance angle and the compact T3 plate thickness, the insert offers a stable support in toolholders and minimises the risk of edge overhang. The rhombic contour gives good accessibility in confined setups while preserving clamping stability. These geometric traits reduce set‑up variability and allow straightforward integration into established turning cycles, supporting predictable cycle times and easier quality control. Material suitability and practical selection advice The WEP01C cermet grade is optimised for finishing applications; users should consult the product matrix for exact material recommendations and cutting data. Where cermet performance is required—especially for improved wear resistance and elevated surface quality—the series is a sound choice. For customers evaluating tool change intervals or surface targets, the insert offers a clear trade‑off between fine finishing potential and economical edge life. Contribution to productivity and cost effectiveness By lowering the need for secondary finishing and stabilising part quality, this insert can contribute to reduced overall process costs and shorter throughput times. The combination of a Cermet substrate, the FX4 chip control and the rhombus geometry supports both automated production and manual set‑ups, helping to maintain a steady flow and high first‑pass yield in serial manufacturing. For specification matching, availability and optimal toolholder pairing contact Metav Werkzeuge to discuss Walter Tools inserts and application‑specific recommendations Technical data Article number: DCGT11T308ML-FX4-WEP01C-WALTER Label: Drehwendeschneidplatte DCGT11T308ML-FX4 WEP01C Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Walter Cermet Grade: WEP01C ISO designation: DCGT11T308ML-FX4 WEP01C Stock designation: DCGT11T308ML-FX4 UID: DCGT11T308ML-FX4-WEP01C-WALTER Material: Katalogabhängig Facts Size: 11 Corner radius: 0.8 mm Clearance angle: 7° Thickness: T3 Tolerance class: G Special features Chipbreaker: FX4 Plate form: Rhombus 55° Cermet grade: WEP01C Series description: Walter Cermet Execution: T FAQ What cutting tasks is this insert best suited for? The DCGT11T308ML-FX4 WEP01C insert from Walter Tools is primarily intended for finishing and semi‑finishing turning where surface quality and repeatable edge life are required. Which toolholders are compatible with the rhombus 55° form? Standard toolholders that accept Rhombus 55° indexable inserts will accept this insert; selection of a suitable seat and clamp type ensures the Walter Tools insert achieves its designed stability. How does the FX4 chipbreaker influence machining behaviour? The FX4 chipbreaker promotes short, controlled chips and steadier cutting forces, which reduces machine downtime and helps maintain consistent surface finishes during series production. Is WEP01C suitable for stainless applications? WEP01C is a Walter cermet grade optimised for fine finishing; suitability for specific materials should be verified against the manufacturer’s product matrix for temperature and wear considerations. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius balances robustness and finish quality, helping to achieve lower roughness values without excessive cutting forces on most finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
DCGT11T308MR-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Combining the WEP01C cermet grade, the FX4 chipbreaker and a 0.8 mm corner radius provides stable chip control, fine surface finish and predictable edge life; order the insert directly via Metav Werkzeuge or contact their consultants for application advice. DCGT11T308MR-FX4 WEP01C turning insert, rhombic 55° geometry — Walter Tools The DCGT11T308MR-FX4 WEP01C is a cermet turning insert engineered for precision finishing and controlled chip formation in general turning operations. Cermet grade WEP01C for consistent edge life Rhombic 55° shape for versatile turning 0.8 mm corner radius for fine finishing FX4 chipbreaker for stable chip control Predictable wear performance for finishing operations The Walter Cermet grade WEP01C combines the hardness and thermal stability of cermet materials with an edge geometry tailored for finishing work. This construction is focused on delivering consistent edge life and improved surface quality compared with conventional carbide grades. The result is a stable cutting edge that maintains form over longer tool engagements, which reduces the frequency of insert changes and supports a steadier production flow. When assessing tool selection, refer to the manufacturer matrix to confirm suitability for specific workpiece materials. Geometry and micro-geometry that improve surface quality The rhombic 55° form together with a 0.8 mm corner radius and a 7° relief angle creates a cutting geometry optimised for fine turning and profile finishing. The modest corner radius reduces the formation of chatter marks while preserving strength at the cutting edge, which helps achieve consistent dimensional accuracy. The T3 thickness specification contributes to insert stability under light to moderate cutting forces, making the geometry well suited to operations where surface integrity and repeatability are priorities. Chip control and process stability for reliable machining The dedicated FX4 chipbreaker promotes controlled chip segmentation and evacuation, supporting uninterrupted turning cycles and reducing the risk of built-up edge. Stable chip formation contributes to consistent cycle times and improved part quality, particularly in finishing passes. In combination with the WEP01C grade and the insert’s geometry, the chipbreaker assists in maintaining process reliability across repeated workpieces, which can enhance throughput in batch production or precision component manufacture. Discuss machining strategy with Metav Werkzeuge to verify the Walter Tools DCGT11T308MR-FX4 WEP01C is the right choice for the intended finishing application and to obtain tailored recommendations Technical data SKU: DCGT11T308MR-FX4-WEP01C-WALTER Article designation: DCGT11T308MR-FX4 WEP01C Product type: turning insert (indexable insert) Manufacturer: Walter Tools Series: Walter Cermet Material grade: Katalogabhängig Dimensions & core data Size designation: 11 Corner radius: 0.8 mm Relief angle: 7° Thickness designation: T3 Shape: Rhombic 55° Design & special features Chipbreaker: FX4 Grade: WEP01C (cermet) Tolerance class: G Execution: T Series description: Walter Cermet — cermet cutting material FAQ What is the primary advantage of the WEP01C grade? The WEP01C cermet grade in the DCGT11T308MR-FX4 WEP01C insert provides improved edge stability and enhanced surface finish potential compared with some carbide alternatives; suitability for specific materials should be checked in the product matrix. Which cutting tasks suit the rhombic 55° geometry? Rhombic 55° inserts are typically chosen for versatile turning and finishing operations where a balance between access to profiles and cutting edge strength is required; the DCGT11T308MR-FX4 WEP01C turning insert is configured accordingly. How does the FX4 chipbreaker affect machining? The FX4 chipbreaker promotes controlled chip formation and evacuation, which supports process stability and reduces the likelihood of chip-related interruptions when using the Walter Tools insert. Can the DCGT11T308MR-FX4 WEP01C be used for roughing? The insert is optimised for finishing and stable edge performance; for heavy roughing engagements different geometries or grades may be more appropriate — consult the Walter Cermet product information for recommendations. Where to get further application data for this insert? Application details and the material suitability matrix for the DCGT11T308MR-FX4 WEP01C insert are available from Metav Werkzeuge and Walter Tools technical documentation; Metav Werkzeuge can provide tailored machining advice. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names are mentioned solely for clarification. There is no affiliation between our company and the brands named. The offered item is an original, factory-new product of the manufacturer Walter Tools.
DCGW070202EM-2 WBS10 WBS10 Wendeplatten - Walter Tools
Taking advantage of CBN cutting performance and a precise Rhombic 55° geometry reduces tool changes and stabilises the turning process; the robust corner geometry and 7° clearance support consistent surface quality and longer runtimes. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific guidance. DCGW070202EM-2 WBS10 — Indexable turning insert (CBN), Rhombic 55° — Walter Tools DCGW070202EM-2 WBS10 is a Walter Tools indexable turning insert developed for hard-material turning tasks, combining a CBN cutting grade with a rhombic geometry to deliver repeatable edge performance in demanding production environments. CBN cutting grade WBS10 for hard materials Rhombic 55° insert geometry 7° clearance angle for secure cutting 0.2 mm corner radius for precision High-performance cutting for hardened materials The CBN-based WBS10 grade provides exceptional wear resistance, particularly in the machining of hardened steels and similarly abrasive workpieces. As a consequence, cycle times are kept stable and unplanned tool changes are reduced, which improves overall productivity. The insert’s design supports predictable wear behaviour, enabling process planners to schedule maintenance and replacement with greater confidence. Where a consistent cutting edge is essential, the combination of CBN technology and a dedicated insert form delivers measurable production benefits. Reliable chip control and consistent workpiece finish The Rhombic 55° form and integrated chipbreaker are tuned to promote controlled chip formation and evacuation under higher cutting stresses. Together with tolerance class G, these characteristics contribute to a steady cutting force profile and a repeatable surface finish. The insert’s geometry supports fine finishing passes while handling interruptions in feed or material variability with minimal compromise to the final surface. For mixed production runs or components with hardened zones, this insert offers a balance between robustness and precision. Secure seating, edge strength and economical use A 7° clearance angle and a 0.2 mm corner radius ensure a secure cutting edge and reduced vibration tendency during turning. The insert size and thickness provide stable clamping and enable consistent radial engagement, which helps to extend usable edge life and maintain dimensional accuracy across batches. The design is oriented towards productive turning operations where repeatability and low downtime are priorities. For optimal results, verify the suitability of the CBN grade against the specific component material and machining parameters, consulting the product matrix where necessary. Contact Metav Werkzeuge for tailored application advice and to obtain technical clarification or a quotation for the Walter Tools DCGW070202EM-2 WBS10 indexable turning insert Technical data Article number: DCGW070202EM-2-WBS10-WALTER Product: Indexable turning insert Brand: Walter Tools Series: Walter CBN / Hartstoff ISO designation: DCGW070202EM-2 WBS10 Facts Clearance angle: 7° Corner radius: 0,2 Insert size: 07 Plate thickness: 02 Tolerance class: G Chipbreaker: 2 Special features CBN cutting grade WBS10 Rhombic 55° plate form Series: Walter CBN / Hartstoff Sort description: WBS10 is a Walter cutting grade for hard and highly abrasive tasks; check product matrix for exact material suitability FAQ Which materials is this insert designed to machine? The DCGW070202EM-2 WBS10 insert is specified for hard and highly abrasive materials; the WBS10 CBN grade is primarily intended for hardened steels and, depending on the product matrix, may be suitable for certain cast materials or superalloys. What does the designation DCGW070202EM-2 tell me? The designation encodes the insert geometry and size: the DCGW form and size 07 identify the rhombic 55° shape and standard envelope, while the additional numerals and letters denote thickness and specific edge form as used in Walter Tools naming. How does the 0.2 mm corner radius affect machining? A 0.2 mm radius balances edge strength and surface integrity; it helps to reduce edge chipping under interrupted cuts while still supporting fine surface finishes during turning operations. Is the CBN grade WBS10 suitable for finishing operations? Yes, the combination of CBN technology, controlled chip formation and a small corner radius makes the insert appropriate for finishing hardened components, provided cutting parameters and machine rigidity are adequate. How can the correct insert be identified for a specific holder or tool system? Match the ISO designation DCGW070202EM-2 WBS10 and the SKU DCGW070202EM-2-WBS10-WALTER with the toolholder catalogue; confirm insert orientation, clamping type and permissible cutting data with the holder manufacturer and the Walter Tools documentation Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation or endorsement. The offered item is an original, factory-new product of the stated manufacturer.
DCGW070202FS-1 WDN10 WDN10 Wendeplatten - Walter Tools
Take advantage of the PKD wear resistance, the controlled chip formation from the 7° relief and the stable Rhombic 55° geometry to reduce tool changes and maintain consistent surface quality; order the insert via Metav Werkzeuge or contact the consultants for application guidance. DCGW070202FS-1 WDN10 – Indexable turning insert, PKD, Rhombic 55° (Walter Tools) A DCGW070202FS-1 WDN10 indexable turning insert optimised for abrasive, non‑ferrous workpieces, offering long wear life and precise edge control for serial machining. Polycrystalline diamond (PKD) grade for high wear resistance Rhombic 55° geometry for stable cutting 7° clearance angle for controlled chip formation 0.2 mm corner radius for fine surface finishes Outstanding wear performance for abrasive, non‑ferrous machining The insert is built on a PKD (polycrystalline diamond) grade, providing exceptional wear resistance when machining abrasive non‑ferrous materials and composites. This high‑hardness cutting material retains cutting edges far longer than conventional carbide grades, which translates into fewer machine stops and lower tooling costs over time. The design supports predictable edge behaviour in high‑abrasion environments, ensuring repeatable results in medium to high‑volume production. Geometry that delivers consistent chips and surface finish Designed with a Rhombic 55° plate form and a 7° clearance angle, the geometry focuses on stable contact conditions and efficient chip evacuation. The integrated chipbreaker 1 and the 0.2 mm corner radius combine to produce controlled chip segments and a superior surface appearance, especially on delicate non‑ferrous alloys. These geometric choices reduce vibration and support reliable cutting forces, which helps maintain process stability across batches. Improved process reliability and economical machining Using a PKD‑grade insert from the Walter cutting‑grade series offers measurable gains in tool life and process reliability. Longer edge life directly reduces tool change frequency and associated cycle interruptions, delivering improved uptime and predictable production costs. The open series format allows integration into established turning toolholders for streamlined replacement and inventory management, while the tolerance class G supports consistent locational and clamping accuracy. Practical integration and selection guidance for workshop use As an indexable insert, the component fits standard turning toolholders that accept the DCGW form factor and plate size 07 with thickness 02. Careful selection against the product matrix is advised to confirm suitability for each workpiece material and cutting scenario; the series description notes that application suitability should be verified for specific alloys and conditions. The clear nominal data and defined geometry simplify tool planning and ordering for production environments. Contact Metav Werkzeuge for tailored advice on Walter Tools PKD inserts and to arrange rapid supply of the DCGW070202FS-1 WDN10; eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical Data Article number: DCGW070202FS-1-WDN10-WALTER SKU: DCGW070202FS-1-WDN10-WALTER Designation: DCGW070202FS-1 ISO designation: DCGW070202FS-1 WDN10 Brand: Walter Tools Product type: Indexable turning insert Facts Plate form: Rhombic 55° Plate size: 07 Plate thickness: 02 Clearance angle: 7° Corner radius: 0.2 mm Chipbreaker: 1 Tolerance class: G Special features Cutting grade: polycrystalline diamond (PKD) Series: Walter cutting‑grade series (open series) Chip control: micro‑profile chipbreaker Application note: Verify material suitability with product matrix Execution: W FAQ What materials is this insert intended for? The DCGW070202FS-1 WDN10 insert is intended primarily for abrasive, non‑ferrous materials and composites where a PKD cutting edge provides superior wear performance. Can this insert be used on steel or stainless steel? PKD‑grade inserts like the DCGW070202FS-1 WDN10 are generally not recommended for standard steel or stainless steel applications; suitability should be confirmed against the specific material and process requirements. How does the Rhombic 55° shape affect turning performance? Rhombic 55° geometry provides a stable cutting edge angle and favourable rake conditions, supporting controlled cutting forces and consistent surface finishes during turning operations. What is the benefit of the 0.2 mm corner radius? A 0.2 mm corner radius offers a balance between strength and finish capability, improving edge durability while enabling finer surface qualities on the workpiece. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGW070202TM-2 WBH20 Wendeplatten - Walter Tools
Take advantage of the combination of CBN grade WBH20, rhombic 55° geometry and a 7° clearance angle for reliable hard turning and extended tool life. Order supply or seek application advice via Metav Werkzeuge for efficient integration into production. DCGW070202TM-2 WBH20 – Turning indexable insert (CBN) by Walter Tools The DCGW070202TM-2 WBH20 is a CBN turning insert engineered for hard machining of hardened steels, offering a rhombic 55° geometry and a precise corner radius for consistent surface quality CBN grade WBH20 for hard turning Rhombic 55° geometry for versatile engagement 7° clearance angle for reduced rubbing Corner radius 0.2 mm for accurate finishes High wear resistance for demanding hard turning The WBH20 cutting grade is a CBN solution developed for the specific demands of hardened steels (ISO 513 group H). As a superabrasive grade, it provides high wear resistance and maintains a stable cutting edge under elevated contact stresses, which translates into fewer insert changes and improved uptime. For production scenarios where component hardness and abrasive wear accelerate tool degradation, this insert offers a predictable life cycle and consistent performance. Geometry engineered for accuracy and accessibility The rhombic 55° shape combined with a corner radius 0.2 mm and a 7° clearance angle delivers a balanced compromise between cutting strength and accessibility into shoulders and grooves. The geometry supports a stable chip flow and helps to preserve surface integrity on parts that demand tight tolerances. In practice, this means fewer secondary operations and more reliable first-pass quality for turned components. Productivity and process reliability in hard machining Designed as part of the Walter CBN / Hartstoff series, the insert promotes process reliability in hard machining environments. Using a CBN grade reduces thermal wear and preserves the cutting edge when compared to conventional carbide solutions for the same task, enabling steady cycle times and reduced machine downtime. For production engineers and toolroom managers, this leads to measurable gains in throughput and repeatability across batch runs. Practical specification and application context This indexable insert belongs to the DCGW070202TM-2 family and is supplied in the Walter CBN / Hartstoff series to address hard and highly abrasive materials. Its compact form factor and chipbreaker class 2 make it suitable for finishing and semi-finishing passes on pre-hardened or fully hardened workpieces. Engineers specifying tooling for hard turning applications will appreciate the combination of stable edge geometry and a grade tailored for high contact stress situations. Contact Metav Werkzeuge for material matching, cutting-parameter guidance or to arrange supply of Walter Tools CBN inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: DCGW070202TM-2-WBH20-WALTER Designation: DCGW070202TM-2 WBH20 Product type: Turning indexable insert Series: Walter CBN / Hartstoff Grade: WBH20 Manufacturer: Walter Tools Facts Free angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 55° Plate size: 07 Plate thickness: 02 Chipbreaker: 2 Tolerance class: G Special features CBN cutting material (WBH20) Suitable for hardened steels (ISO group H) Application: hard machining / hard turning Series: Walter CBN / Hartstoff Execution: W FAQ Which workpiece materials are suitable for this insert? The DCGW070202TM-2 WBH20 is a CBN insert intended primarily for hardened steels (ISO 513 group H) and for pre-hardened or heat-treated components where wear resistance is critical. What benefits does the rhombic 55° geometry provide? Rhombic 55° geometry offers good approach angles for shoulder and profile turning while maintaining cutting edge strength; combined with a 7° clearance and a 0.2 mm corner radius it supports accurate finishes and stable chip control. Is this insert a replacement for carbide types in hard turning? For many hard machining tasks, the WBH20 CBN grade replaces carbide by delivering longer tool life and improved edge stability under high contact stresses; suitability should be verified against specific process parameters. How does the Walter Tools CBN grade differ from other CBN solutions? Walter Tools’ CBN grade WBH20 is optimised for hard and highly abrasive operations, emphasising consistent wear behaviour and reproducible surface quality in production environments; the DCGW070202TM-2 designation denotes the geometrical and tolerance specifics for correct toolholder pairing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGW070202TS-2 WBH10 Wendeplatten - Walter Tools
Take advantage of the CBN-based WBH10 grade for extended tool life, the rhombic 55° geometry for reliable chip control and consistent surface finish, and the compact 0.2 mm corner radius for precision hard turning; order directly via Metav Werkzeuge or consult our specialists for application support. DCGW070202TS-2 WBH10 indexable turning insert — CBN grade for hardened steels (Walter Tools) The DCGW070202TS-2 WBH10 is an indexable turning insert tailored for hard machining and finishing of hardened steels, delivering wear resistance and process stability in demanding production environments. CBN grade WBH10 for hard machining Rhombic 55° insert geometry 7° relief angle for stable cutting 0.2 mm corner radius for fine finishes Suitable for hardened steels (H class) Proven wear resistance for hard turning and long tool life The combination of CBN cutting material and the WBH10 grade offers a high-resistance solution for work on hardened steels (ISO group H). Cubic boron nitride is a superabrasive optimised for high-temperature stability and low wear in heavy-duty turning, which reduces the frequency of tool changes and supports uninterrupted production. This results in measurable cost advantages through fewer machine stops and consistent component tolerances. Operators familiar with conventional carbide inserts will find the transition to a CBN-based solution practical where hardness and abrasion are primary challenges. Geometry engineered for consistent surface quality and chip control The rhombic 55° shape and the small 0.2 mm corner radius are designed to balance strength and finish quality: the acute geometry allows access to tight profiles while the corner radius supports a fine surface without excessive cutting forces. The 7° relief angle provides adequate clearance to avoid rubbing and thermal damage, improving edge stability. The integrated chipbreaker 2 assists in segmenting chips under hard-cutting conditions, reducing the risk of built-up edge and facilitating predictable chip evacuation. Together these features enable reproducible part quality and fewer secondary operations. Reliable process security and efficient hard-machining workflows Placed within the Walter CBN / Hartstoff series, the insert supports stable machining of pre-hardened and hardened steels, enabling reliable batch production and repeatable results. The sturdy design promotes long tool life and steady cutting performance, which in turn contributes to shorter cycle times and reduced scrap rates. For production planners, this equates to improved throughput and more consistent surface integrity. If application data or cutting parameters are required, Metav Werkzeuge provides technical consultancy to align insert selection with machine capability and component specifications. Contact Metav Werkzeuge for tailored application advice on Walter Tools CBN inserts and to check availability — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: DCGW070202TS-2-WBH10-WALTER Article designation: DCGW070202TS-2 WBH10 Product type: indexable turning insert Manufacturer: Walter Tools Core data Relief angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 55° Plate size: 07 Plate thickness: 02 Chipbreaker: 2 Tolerance class: G Special features Cutting material: CBN (WBH10) Suitable for: hardened steels (H) Series: Walter CBN / Hartstoff Intended application: hard turning and finishing FAQ What workpiece materials are recommended for this insert? The DCGW070202TS-2 WBH10 is engineered primarily for hardened steels (ISO group H); its CBN composition suits high-hardness turning tasks. How does the small corner radius affect surface finish? A 0.2 mm corner radius on the DCGW070202TS-2 WBH10 helps produce fine surface finishes while limiting cutting forces, making it suitable for precision facing and finishing passes. Is this insert compatible with standard toolholders for 55° rhombic inserts? Yes, the rhombic 55° form of the DCGW070202TS-2 WBH10 is compatible with toolholders designed for 55° rhombic indexable inserts, provided clamping and seat specifications match. What advantages does CBN offer compared with carbide for hard turning? CBN offers superior wear resistance and thermal stability on hardened materials, which often translates to longer tool life and more consistent dimensional control than conventional carbide under similar conditions. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no affiliation between our company and the brands cited. The offered article is an original, brand-new product from Walter Tools.
DCGW070204EM-2 WBS10 WBS10 Wendeplatten - Walter Tools
Take advantage of the high wear resistance and consistent edge life of the CBN grade combined with precise geometry for reliable, repeatable finishing of hardened components. Order the insert directly via Metav Werkzeuge or consult our specialists for application matching and availability. DCGW070204EM-2 WBS10 indexable turning insert — Walter Tools (CBN grade, Rhombic 55°) The DCGW070204EM-2 WBS10 is an indexable turning insert engineered for hard-material machining and robust finishing operations, especially suited to hardened steels and other wear‑prone alloys. CBN grade WBS10 for hard and abrasive materials Rhombic 55° insert form for versatile turning 7° clearance angle for reduced cutting forces 0.4 mm corner radius for fine surface finish Higher uptime through a wear‑resistant CBN grade The use of CBN cutting material in the WBS10 grade delivers markedly improved wear resistance compared with conventional carbide grades. This makes it particularly effective for operations on hardened steels and other highly abrasive workpieces, where edge life and dimensional stability are critical. The result is fewer insert changes, longer production runs and more predictable tool‑life management in serial machining. Consistent surface quality from optimised geometry The Rhombic 55° form combined with a 0.4 mm corner radius and 7° clearance produces a balance between edge strength and surface finish. The moderate corner radius supports a fine surface while maintaining resistance to chipping during interrupted cuts. The positive clearance angle reduces cutting forces and vibration, which helps to stabilise the process and achieve repeatable part quality in precision turning applications. Process security and economic machining Designed for productivity and consistent performance, this insert supports stable chip formation and reliable cutting behaviour under heavy wear conditions. As a branded product from Walter Tools, it offers proven manufacturing standards and traceable quality control. The combination of long tool life and predictable performance lowers overall machining costs by reducing downtime and rework, which contributes directly to more economical production cycles. Practical application and selection guidance The insert is intended for finishing and semi‑finishing of hard and highly abrasive materials; suitability depends on the workpiece and machining strategy. It is recommended to check the manufacturer's product matrix for specific material pairings and to match cutting data to the machine and clamping conditions. For bespoke applications or uncertainty about compatibility, consult Metav Werkzeuge for machining parameter recommendations and variant selection. For tailored application advice, stock information or delivery options for Walter Tools inserts, contact Metav Werkzeuge — Metav Werkzeuge GmbH is available to advise on suitability and to arrange supply Technical Data Article number: DCGW070204EM-2-WBS10-WALTER Designation: DCGW070204EM-2 WBS10 Series: Walter CBN / Hartstoff Manufacturer: Walter Tools Numbers Corner radius: 0.4 mm Clearance angle: 7° Insert size: 07 Insert thickness: 02 Chipbreaker: 2 Tolerance class: G Special features Cutting grade: WBS10 (CBN) Insert form: Rhombic 55° Execution: W Material designation: Katalogabhängig Suitability note: For hardened steels and wear‑prone materials (verify with product matrix) FAQ What materials is this insert best suited for? The DCGW070204EM-2 WBS10 insert from Walter Tools is optimised for hardened steels and other highly abrasive materials; final suitability should be verified in the manufacturer’s product matrix. Can the insert be used for interrupted cuts or grooving? The Rhombic 55° geometry and 0.4 mm corner radius provide good edge strength for many interrupted turning tasks, but application specifics depend on the machine and clamping conditions. How does the CBN grade affect tool life compared with carbide? CBN in the WBS10 grade offers significantly higher wear resistance on hardened workpieces, resulting in longer edge life and fewer tool changes than standard carbide grades in comparable conditions. Is the geometry suitable for fine surface finishing? Yes — the combination of a small corner radius and positive clearance angle supports fine surface quality while maintaining edge robustness for finishing operations. Where can cutting data and compatibility details be obtained? Refer to Walter Tools’ technical documentation and the product matrix for recommended cutting parameters and material pairings; Metav Werkzeuge can also provide application guidance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names remain the property of their respective owners and are used here for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
DCGW070204FS-1 WDN10 Wendeplatten - Walter Tools
Benefit from the combination of PCD grade wear resistance, precise Rhombic 55° geometry and a 0.4 mm corner radius for predictable chip control and consistent productivity. Order the DCGW070204FS-1 WDN10 directly via Metav Werkzeuge or consult our technical advisors if clarification is required. DCGW070204FS-1 WDN10 indexable turning insert by Walter Tools — PCD, Rhombic 55° The DCGW070204FS-1 WDN10 is an indexable turning insert engineered for high‑wear resistance applications, specifically intended for machining non‑ferrous and other abrasive, non‑iron materials. PCD grade for abrasive non‑ferrous materials Rhombic 55° geometry for precise engagement Corner radius 0.4 mm for controlled chip formation 7° clearance angle for reduced cutting forces Longer tool life and consistent productivity in abrasive applications The insert’s polycrystalline diamond (PCD) composition delivers superior wear resistance, reducing flank wear and extending tool life when machining abrasive, non‑ferrous materials. This material choice translates into fewer indexings and lower downtime, which supports a stable production rhythm and a clearer cost‑benefit profile for high‑volume turning operations. The combination of a wear‑resistant cutting edge and robust grade stabilises cutting performance over long runs, improving process reliability and reducing the frequency of insert changes. Geometry that improves stability and surface quality The Rhombic 55° shape, paired with a 0.4 mm corner radius and a 7° clearance angle, is designed to balance engagement and strength for turning tasks. The geometry promotes predictable deformation of the workpiece material at the cutting zone, contributing to improved surface finish and dimensional consistency. The moderate corner radius aids chip formation and reduces the risk of brittle edge chipping on abrasive materials, while the clearance angle helps to lower cutting forces and heat input — beneficial for maintaining component tolerances and extending machine tool life. Practical guidance for selecting and using the insert This indexable insert is supplied in the Walter Schneidstoffsorte series and marked with the WDN10 grade; the DCGW070204FS-1 WDN10 is optimised for non‑ferrous alloys and similarly abrasive, non‑iron materials. As raw material properties vary, it is recommended to consult the product matrix to confirm suitability for specific alloys and operating conditions. For reliable integration into an existing toolholder system, check the toolholder compatibility with a Rhombic 55° insert and verify the tolerance class G for fit. For process setup, start with conservative cutting data and adjust feed and speed to balance tool life and surface quality. For expert selection and to ensure the correct PCD grade for specific non‑ferrous applications, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 to discuss the DCGW070204FS-1 WDN10 and matching toolholder solutions Technical Data Article number: DCGW070204FS-1-WDN10-WALTER ISO designation: DCGW070204FS-1 WDN10 Series: Walter Schneidstoffsorte - Serie offen Grade: WDN10 Manufacturer: Walter Tools Core Specifications Plate form: Rhombus 55° Plate size: 07 Plate thickness: 02 Corner radius: 0.4 Free angle / clearance: 7° Chipbreaker: 1 Tolerance class: G Special features Polycrystalline diamond (PCD) cutting material Intended application: non‑ferrous and abrasive non‑iron materials (check product matrix) Series description present in manufacturer data FAQ What materials is this insert best suited for? The DCGW070204FS-1 WDN10 insert is a PCD grade intended primarily for non‑ferrous metals and other abrasive, non‑iron materials; suitability should be checked against the product matrix for specific alloys. How does the Rhombic 55° shape affect machining? Rhombic 55° geometry on the DCGW070204FS-1 WDN10 ensures predictable engagement and contributes to improved surface finish and dimensional stability during turning operations. What benefit does the 0.4 mm corner radius provide? A 0.4 mm corner radius offers controlled chip formation and reduced risk of edge chipping, which helps maintain consistent cutting performance when machining abrasive materials. Is the insert compatible with standard holders for DCGW‑type inserts? Compatibility depends on the holder design and tolerance class; the DCGW070204FS-1 WDN10 conforms to tolerance class G and should be checked against the toolholder specifications before use. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned for clarification only. There is no affiliation between our company and the brands listed. The offered item is an original, factory‑new product of the named manufacturer.
DCGW070204TM-2 WBH10 Wendeplatten - Walter Tools
Take advantage of the combination of CBN cutting material, precise rhombic geometry and robust wear resistance for consistent hard turning results; order the insert directly via Metav Werkzeuge or ask the consultants for process recommendations. DCGW070204TM-2 WBH10 turning indexable insert — CBN grade for hard turning, Walter Tools The DCGW070204TM-2 WBH10 is a rhombic 55° turning indexable insert in a CBN grade, engineered for hard machining tasks and finishing of hardened steels CBN grade for hard turning Rhombic 55° form, 7° relief 0.4 mm corner radius for fine finishes Stable wear resistance for long tool life High-performance CBN for hard and wear-intensive tasks The insert employs the WBH10 CBN cutting material, developed for high hardness conditions and long service intervals. As a CBN-based solution, it provides excellent wear resistance and dimensional stability when machining hardened steels, which reduces frequency of tool changes and supports predictable production cycles. This characteristic translates into a measurable improvement in process reliability and a lower total cost per component when compared with conventional grades under comparable conditions. Geometry and chip control for precise turning results Designed in a rhombic 55° shape with a 0.4 mm corner radius and a 7° relief, the geometry ensures a robust cutting edge with favourable engagement angles for turning operations. The integrated chipbreaker 2 promotes controlled chip formation under high contact stresses, supporting consistent surface quality and repeatable component tolerances. These geometric features combine to deliver stable cut entry and reduced vibration, which is particularly beneficial in finishing passes on pre-hardened or fully hardened workpieces. Application spectrum and process integration The series designation Walter CBN / Hard material and the documented classification for group H confirm suitability for hardened steels according to ISO guidance; the insert is intended for hard-turning and demanding finishing tasks where standard carbide grades would wear rapidly. The robust cutting edge and designed chip control help maintain surface integrity and extend tool life in serial production. For reliable integration into a machining cell, the insert can be paired with appropriate Walter Tools toolholders and clamping systems to exploit its full potential. For hard-turning applications where longevity and process stability matter, contact Metav Werkzeuge for tailored recommendations and ordering of Walter Tools CBN inserts — info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: DCGW070204TM-2-WBH10-WALTER Designation: DCGW070204TM-2 WBH10 Manufacturer: Walter Tools Series: Walter CBN / Hartstoff Facts Free angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 55° Plate size: 07 Chipbreaker: 2 Tolerance class: G Thickness: 02 Material group: H (hardened steels) Special features CBN cutting material WBH10 Designed for hard turning and finishing Stable wear resistance and dimensional stability Suitable for pre-hardened and hardened steels according to ISO group H FAQ What materials is this insert intended for? The insert is specified for hard and wear-intensive materials; the WBH10 CBN grade is particularly suited to hardened steels and similar hard alloys. How does the 0.4 mm corner radius affect the finish? A 0.4 mm corner radius provides a favourable balance between strength and surface finish, enabling fine finishing passes with improved edge stability. Is the insert suitable for finishing and semi-finishing operations? Yes, the combination of the rhombic 55° geometry and the WBH10 grade makes the insert appropriate for both finishing and semi-finishing on hardened workpieces. What does the chipbreaker 2 provide in machining? The chipbreaker 2 promotes consistent chip formation under high cutting pressures, improving process reliability and maintaining surface quality. Which tolerance class is supplied with this insert? The insert is supplied in tolerance class G, ensuring repeatable geometry for precise turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer, Walter Tools.
DCGW070204TM-2 WBH10C WBH10C Wendeplatten - Walter Tools
Take advantage of the combination of CBN cutting performance, precise Rhombic 55° geometry and a robust 0.4 mm corner radius for consistent hard-turning results; order via Metav Werkzeuge or consult their specialists for application support. DCGW070204TM-2 WBH10C indexable turning insert – Walter Tools, CBN grade for hardened steels The DCGW070204TM-2 WBH10C is an indexable turning insert developed for hard turning and severe wear conditions, offering a coated CBN grade tailored to maintain edge stability on hardened steels and similar high-hardness alloys. CBN cutting grade WBH10C for hard turning Rhombic 55° geometry for versatile cuts 7° relief angle for stable penetration 0.4 mm corner radius for fine surface finish High-performance hard turning for stable results The insert’s core advantage is its CBN-based WBH10C grade, engineered for high abrasion resistance and consistent edge life when machining hardened steels. This translates into fewer insert changes and predictable cycle times, which improves overall process efficiency. The indexable turning insert format allows fast replacement and consistent cutting geometry without regrinding, supporting reliable production planning and lower tool-related downtime. Geometry and cutting behaviour that support precision With a Rhombic 55° outline and a 7° relief angle, the shape provides accessible cutting directions while maintaining robustness at the cutting edge. The 0.4 mm radius at the corner reduces the risk of micro-chipping and contributes to a smoother surface finish on the workpiece. These geometric choices combine to offer a balance between strength and accessibility, so machining strategies can focus on process optimisation rather than compensating for insert limitations. Process security, material scope and economic benefits Designed within the Walter CBN / Hartstoff series, the insert is intended primarily for high-hardness applications and is suitable for pre‑hardened and hardened steels. The material choice and construction deliver high wear resistance and reliable tool life across extended runs. From a cost-efficiency perspective, improved edge stability and fewer interruptions for insert replacement lower total machining cost per part, while repeatable performance supports consistent part quality and traceable production data. For precise recommendations on insert clamping, compatible tool holders and application parameters for Walter Tools' CBN grade, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss tailored solutions and availability. Technical data Article number: DCGW070204TM-2-WBH10C-WALTER Type: indexable turning insert Series: Walter CBN / Hartstoff Grade: WBH10C Shape: Rhombus 55° (DCGW) Relief angle: 7° Corner radius: 0.4 Plate size code: 07 Thickness code: 02 Chipbreaker: 2 Tolerance class: G Manufacturer: Walter Tools Key measurements Relief angle: 7° Corner radius: 0.4 mm Plate size code: 07 Thickness code: 02 Chipbreaker type: 2 Tolerance: G Materials & features Coated CBN cutting material Application: hard turning of hardened steels Suitable for pre‑hardened and hardened steels Geometry: Rhombic 55° Design: indexable insert for quick replacement Series characteristic: high wear resistance and edge stability FAQ What materials is this insert suitable for? The DCGW070204TM-2 WBH10C insert is intended primarily for hardened steels and pre‑hardened materials; its WBH10C CBN grade provides abrasion resistance for such applications. What does the WBH10C designation mean? WBH10C denotes Walter Tools’ CBN cutting grade optimised for hard and wear‑intensive turning tasks, offering a coated CBN substrate designed for stable cutting edges. Which insert geometry does this item have? The insert features a Rhombic 55° geometry (DCGW form) with a 0.4 mm corner radius and a 7° relief angle, delivering a compromise between accessibility and edge strength. Is this insert suitable for finishing hardened parts? Yes. The combination of CBN grade and a small corner radius supports fine surface finishes on hardened components while maintaining tool life under high contact stresses. Manufacturer: Walter Tools; Headquarters: Tübingen, Germany; Protected trademarks and trade names belong to their respective owners. Brand names and protected designations are mentioned for explanation purposes only. There is no connection between our company and the named brands. The offered item is original, brand-new goods from the manufacturer.
DCGW070204TM-2 WBH20 Wendeplatten - Walter Tools
Optimise hard turning with a tool that combines exceptional wear resistance and reliable cutting geometry: the CBN WBH20 grade delivers consistent edge life under high contact stresses, while the rhombic 55° format and 7° clearance ensure secure seating and predictable chip flow. Order directly via Metav Werkzeuge or consult our specialists for application guidance. DCGW070204TM-2 WBH20 indexable turning insert, rhombic 55° – Walter Tools DCGW070204TM-2 WBH20 is an indexable turning insert engineered for hard machining tasks, primarily the precision turning of hardened and pre-hardened steels. CBN grade WBH20 for hard turning Rhombic 55° geometry for versatile approach 7° clearance angle for secure chip control 0.4 mm corner radius for controlled finishing Maximise process reliability with wear-resistant CBN performance The DCGW070204TM-2 WBH20 insert is built around a CBN cutting grade that is optimised for demanding hard-turning operations. The cutting material offers high wear resistance under elevated contact temperatures and abrasive conditions, which translates into longer tool life and fewer index changes. This reliability reduces unplanned downtime and supports stable cycle times on production lines where consistency is critical. The combination of grade and geometry supports repeatable results across batches. Achieve consistent surface quality through defined geometry The rhombic 55° form and 7° clearance angle are designed to deliver a balanced cutting action with reduced flank rubbing and improved access to workpiece contours. The 0.4 mm corner radius provides a compromise between edge strength and the ability to produce fine surface finishes, while the integrated chipbreaker 2 promotes predictable chip formation and evacuation. Together, these characteristics support controlled finishes in hard materials without excessive cutting forces, making the insert suitable for finishing and semi-finishing passes where surface integrity matters. Clear material suitability and focused applications This CBN insert is targeted primarily at hardened steels (ISO H) and is also suitable for pre-hardened steel applications where elevated hardness requires a wear-resistant cutting material. The WBH20 grade is engineered for hard machining tasks that demand stable edge life and repeatable dimensional control. Selection of this grade helps to maintain consistent tolerances and surface conditions when machining components subjected to high contact stresses, such as hardened shafts, bearing seats or heat-treated components. Easy identification and practical selection for production setups Specified under the ISO-style designation DCGW070204TM-2 and supplied by Walter Tools, this insert allows for straightforward catalogue matching and tooling planning. The clear coding makes holder selection and inventory control simpler for production engineers. For operators unfamiliar with CBN grades or with particular workpiece alloys, application advice is available to align cutting data and insert choice with the required productivity and surface specifications, supporting a smooth integration into existing machining processes. For precision hard turning with the Walter Tools WBH20 grade, contact Metav Werkzeuge for application advice and procurement support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DCGW070204TM-2-WBH20-WALTER Description: DCGW070204TM-2 WBH20 indexable turning insert Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Insert form: Rhombic 55° Insert size: 07 Thickness code: 02 Chipbreaker: 2 Tolerance class: G Special features Grade: WBH20 (CBN) Series: Walter CBN / Hartstoff Material suitability: hardened steels (ISO H) Suitable for pre-hardened steel: yes ISO designation: DCGW070204TM-2 WBH20 FAQ What applications are best suited to this insert? The DCGW070204TM-2 WBH20 indexable turning insert is intended for hard turning of hardened and pre-hardened steels, offering stable edge life for finishing and semi-finishing tasks. What does the WBH20 grade signify? WBH20 is a CBN grade designed for high wear resistance and process stability in hard machining; the grade prioritises consistent cutting-edge performance under abrasive, high-contact conditions. How does the insert geometry influence the finish? The rhombic 55° shape combined with a 7° clearance and a 0.4 mm corner radius enables secure seating, controlled cutting forces and a balance between edge strength and surface quality. How should the insert be specified when ordering? Order by the SKU DCGW070204TM-2-WBH20-WALTER or refer to the ISO-style designation DCGW070204TM-2 WBH20 to ensure the correct CBN grade and geometry are supplied. Can this insert be used on pre-hardened materials? Yes, the data indicates suitability for pre-hardened steel as well as for hardened steels within the ISO H material group. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only and do not imply any affiliation between our company and the listed manufacturers. The offered article is an original, factory-new product of the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com