DCMT070208-FW4 WPP20G WPP20G Wendeplatten - Walter Tools
Efficient steel turning with the Tiger‑tec Gold grade and the FW4 chipbreaker provides consistent chip control and extended edge life; the precise 7° relief and 0.8 mm corner radius support reproducible finishes and stable cutting forces. Order the insert directly via Metav Werkzeuge or consult our application specialists for tailored cutting data. DCMT070208-FW4 WPP20G indexable turning insert (steel) — Walter Tools The DCMT070208-FW4 WPP20G is a precision indexable turning insert designed for reliable steel machining, combining the Tiger‑tec Gold coating technology with an FW4 chipbreaker for balanced wear resistance and toughness. Tiger‑tec Gold coated for long life Optimised FW4 chipbreaker for steel 7° relief angle for stable cutting 0.8 mm corner radius for repeatability Productive chip control for consistent turning results The combination of the FW4 chipbreaker and the Tiger‑tec Gold grade delivers controlled chip formation and removal during steel machining. This leads to fewer interruptions from problematic chips, a more consistent surface finish and the possibility to maintain productive cutting parameters for longer periods. The insert’s geometry and chip control are optimised for typical heat generation and chip behaviour when turning unalloyed and alloyed steel, resulting in a more predictable machining cycle and reduced need for manual intervention. Balanced wear resistance and reliable tool life The WPP20G specification denotes a coated carbide grade engineered to balance wear resistance and toughness for versatile steel applications. As part of the Tiger‑tec Gold series, the grade aims for stable edge retention under continuous cutting, which supports longer tool life and fewer indexings. For production environments this translates into reduced tool change frequency and improved process economy while maintaining dimensional consistency across batches. Precise geometry for repeatable mounting and finishes The rhombic Rhombus 55° shape with a 0.8 mm corner radius, 7° relief angle and the standard 07 insert size combine to offer stable cutting conditions and accurate positioning in the toolholder. The M tolerance class ensures repeatable seating and interchangeability across clamping systems that accept this ISO form. The insert’s thickness 02 provides the rigidity required for many turning operations, lowering vibration risk and supporting consistent surface quality in serial production. Practical advantages for workshop and production use Designed primarily for ISO P materials, this insert is suitable for a broad range of steel machining tasks where a balance of edge life and toughness is required. The coated carbide construction and the Tiger‑tec Gold coating technology enable versatility across finishing and medium-depth turning operations. By reducing unexpected tool wear and improving chip behaviour, the insert contributes to smoother workflows and predictable maintenance planning in busy machine shops. Contact Metav Werkzeuge to specify the Walter Tools DCMT070208-FW4 WPP20G insert for steel applications or to request customised cutting data from our application engineers Technical Data Article number: DCMT070208-FW4-WPP20G-WALTER Designation: DCMT070208-FW4 WPP20G Product type: Indexable turning insert Manufacturer: Walter Tools Grade/series: Tiger‑tec Gold Chipbreaker: FW4 Material group: P (steel) Tolerance class: M Facts Relief angle: 7° Corner radius: 0.8 mm Insert form: Rhombus 55° Insert size: 07 Thickness: 02 Special features Coated carbide grade WPP20G Optimised chip control for steel machining Balanced wear resistance and toughness Suitable for turning of unalloyed and alloyed steel FAQ Which materials is this insert intended for? The DCMT070208-FW4 WPP20G insert is specified for ISO P materials and is suitable for turning unalloyed and alloyed steel. What does the FW4 chipbreaker achieve? The FW4 chipbreaker on this insert improves chip formation and evacuation when machining steel, helping to maintain a steady cutting process and consistent surface finish. What are the advantages of the Tiger‑tec Gold grade? Tiger‑tec Gold, in the WPP20G grade, provides a coated carbide solution that balances wear resistance and toughness, which supports longer edge life and reliable performance in steel turning tasks. Can this insert be used where high repeatability is required? Yes. The Rhombus 55° geometry, the 0.8 mm corner radius and the M tolerance class support repeatable seating and stable cutting forces for reproducible results. What are the key geometric specifications to consider for tooling setup? Key values are the 7° relief angle, 0.8 mm corner radius, Rhombus 55° shape, size 07 and thickness 02; these determine holder compatibility and cutting behaviour. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered product names are used for explanatory purposes only and do not imply any affiliation between our company and the named brands. The listed item is an original, factory‑new product of the manufacturer Walter Tools.
DCMT070208-FW4 WSM20S FW4 Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver series coating with the FW4 chipbreaker and a 0.8 mm corner radius delivers dependable edge stability and controlled chips for demanding materials; order the DCMT070208-FW4 WSM20S directly via Metav Werkzeuge or contact our consultants for tailored application support. DCMT070208-FW4 WSM20S indexable turning insert – Tiger‑tec Silver coating, for stainless steels & superalloys (Walter Tools) A DCMT070208-FW4 WSM20S indexable turning insert engineered for secure chip control and reliable cutting-edge performance when machining stainless steels and heat‑resistant superalloys. Tiger‑tec Silver coating for high wear resistance Optimised FW4 chipbreaker for controlled chips Suited for stainless steels and superalloys High‑temperature performance for difficult materials The WSM20S grade, part of the Tiger‑tec Silver range, is a coated carbide formulation optimised for materials that generate high heat and strain on the cutting edge. Designed specifically for ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium), this insert promotes stable chip formation and reduces the risk of built‑up edge. The result is fewer interruptions in serial production and a more predictable tool life when turning demanding workpieces. Consistent edge life through coating and grade technology A combination of the Tiger‑tec Silver coating and the WSM20S grade provides a balance between hardness and thermal resistance, which translates into consistent edge life under varying operational loads. The coated surface improves wear resistance while maintaining toughness at the cutting edge; this supports repeatable results across batches and reduces unscheduled tool changes, improving overall machining economy. Precision geometry for predictable surface quality The rhombic 55° form and 0.8 mm corner radius are tuned for general turning tasks that require a stable contact point and good surface finish. The 7° relief angle contributes to lower cutting forces in many turning setups, while the standard size and thickness codes ensure compatibility with common toolholders. Together these geometric choices help produce consistent component tolerances and reduce rework. Controlled chips and process security with the FW4 chipbreaker The FW4 chipbreaker is shaped to promote short, manageable chips when machining ductile and tough alloys. Improved chip control decreases the chance of entanglement and workpiece damage, simplifies coolant flow management and supports safer automated or semi‑automated machining cells. This contribution to process security is particularly valuable in series manufacturing where downtime is costly. Typical applications and machine integration This insert is suitable for a range of turning operations on lathes and CNC turning centres where stainless steels or superalloys are processed. The grade and geometry combination is especially relevant for semi‑finish to finish cuts where edge stability and surface integrity are priorities. The insert’s tolerance class and standard form factor allow easy integration into existing toolholder systems designed for rhombic 55° inserts. Practical advantages for production environments Using the DCMT070208-FW4 WSM20S insert supports higher uptime through predictable wear behaviour and consistent chip evacuation. Stocking this grade can reduce the number of specialised grades required for mixed stainless and superalloy production, simplifying logistics while maintaining machining performance. For process optimisation or grade selection, Metav Werkzeuge offers application advice and material‑specific recommendations. For machining applications involving stainless steels or heat‑resistant alloys, consider Walter Tools’ DCMT070208-FW4 WSM20S from the Tiger‑tec Silver range — contact Metav Werkzeuge for application recommendations or to order this insert directly. Technical data Article number: DCMT070208-FW4-WSM20S-WALTER Designation: DCMT070208-FW4 ISO designation: DCMT070208-FW4 WSM20S Product type: indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Tolerance class: M Data Relief angle: 7° Corner radius: 0.8 mm Insert shape: Rhombic 55° Size code: 07 Thickness code: 02 Chipbreaker: FW4 Special features Coating technology: Tiger·tec Silver Material suitability: stainless steels; superalloys / titanium Cutting material: coated carbide Stable edge and chip control Rhombic geometry for versatile turning FAQ Which materials is this insert designed for? The DCMT070208-FW4 WSM20S is designed for ISO groups M and S, meaning it is suitable for stainless steels and heat‑resistant superalloys/titanium as part of the Tiger‑tec Silver family. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker on this turning insert improves chip control and promotes short chips, enhancing process security and reducing the risk of chip entanglement during turning. What are the key geometry details to consider? The insert features a rhombic 55° shape, 0.8 mm corner radius and 7° relief angle, which combine to deliver predictable contact geometry and good surface finish in many turning applications. Is this grade appropriate for finishing or roughing? WSM20S is best applied where edge stability and thermal resistance are required; it is well suited to semi‑finish and finish operations on tough materials rather than heavy roughing. How does the Tiger‑tec Silver series benefit production? Tiger‑tec Silver coatings enhance wear resistance and thermal performance, which supports longer tool life and more consistent results — factors that contribute to reduced downtime and lower tooling costs over time. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT070208-FW4 WSM30S FW4 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WSM30S grade for secure chip formation and prolonged edge life when machining stainless steels and heat-resistant superalloys; the Rhombic 55° geometry with a 0.8 mm nose radius and FW4 chipbreaker ensures consistent surface quality and process stability. Order inserts through Metav Werkzeuge or request application advice from their consultants. DCMT070208-FW4 WSM30S indexable turning insert, Tiger·tec Silver, Rhombic 55° – Walter Tools The DCMT070208-FW4 WSM30S is an indexable turning insert engineered for reliable machining of stainless steels and heat-resistant superalloys, combining a thermally resilient coating with a geometry optimised for stable cutting and chip control. Tiger·tec Silver coating for thermal resistance WSM30S grade for stainless steels and superalloys Rhombic 55° insert with 0.8 mm nose radius FW4 chipbreaker for stable chip formation Prolonged edge life with high thermal stability The combination of the WSM30S cemented carbide grade and the Tiger·tec Silver coating provides enhanced resistance to thermal loading and abrasive wear, which is particularly valuable when machining materials that generate heat or tend to work-harden. For process planners and manufacturing engineers, this translates into fewer tool changes, predictable tool life and reduced downtime. The coating technology supports a stable cutting edge, reducing the risk of built-up edge and ensuring consistent dimensional results across longer production runs. Consistent chip control and improved surface finish The dedicated FW4 chipbreaker is designed to produce short, controllable chips when paired with the Rhombic geometry, lowering the likelihood of entanglement and reducing vibration in the cut. Together with the 0.8 mm nose radius and the 7° clearance angle, the geometry promotes a steady cutting action and a superior surface quality, especially in finishing passes. For workshops aiming for reproducible component appearance, these features enable a balance between material removal and fine surface integrity. Standardised format for simple tooling integration The ISO designation is DCMT070208-FW4, a common format that fits a wide range of indexable turning toolholders; this simplifies stocking and changeover procedures in production environments. The insert’s Rhombic 55° shape and size designation allow flexible approach angles for both roughing and finishing operations, supporting mixed-production shops that machine stainless steels and high-temperature alloys. Compatibility with standard clamping systems facilitates quick replacement and consistent positioning for repeatable results. Key parameters for process planning and setup Essential measurable values support accurate process engineering: clearance angle 7°, nose radius 0.8 mm, insert shape Rhombic 55°, chipbreaker FW4, grade WSM30S and series Tiger·tec Silver. These specifications aid in selecting cutting data, coolant strategy and holder geometry. When programming CAM systems or preparing operation sheets, the predictable behaviour of this insert helps to calculate cycle times and optimise feeds and speeds for both roughing and finishing stages. Contact Metav Werkzeuge for tailored application guidance and to order Walter Tools DCMT070208-FW4 WSM30S inserts; technical consultants can advise on feed/speed recommendations and toolholder compatibility, Metav Werkzeuge is ready to support process integration Technical data Article number / SKU: DCMT070208-FW4-WSM30S-WALTER Manufacturer: Walter Tools Product type: Indexable turning insert ISO designation: DCMT070208-FW4 WSM30S Facts Clearance angle: 7° Nose radius: 0.8 mm Insert shape: Rhombic 55° Size designation: 07 Insert thickness: 02 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM30S Chipbreaker: FW4 Suitable for ISO groups: M (stainless steels) and S (heat-resistant superalloys / titanium) Series: Tiger·tec Silver Execution: T FAQ Is this insert suitable for machining stainless steels? Yes. The DCMT070208-FW4 WSM30S insert uses the WSM30S grade and Tiger·tec Silver coating, which are optimised for machining stainless steels (ISO group M) with improved chip control and edge stability. Can this insert be used on heat-resistant superalloys or titanium? The WSM30S grade and the FW4 chipbreaker make the insert appropriate for many heat-resistant superalloys (ISO group S); selection should consider component geometry and cutting parameters for best results with the DCMT070208-FW4 insert. What advantages does the FW4 chipbreaker provide? The FW4 chipbreaker on this insert promotes short, controllable chips and stable cutting forces, contributing to consistent surface finish and reduced vibration when the DCMT070208-FW4 WSM30S insert is used in suitable applications. How does the Rhombic 55° geometry affect machining? The Rhombic 55° shape provides versatile entry angles for turning operations, enabling a balance between strength and access for finishing, which benefits operations using the DCMT070208-FW4 WSM30S in mixed-production settings. Are there recommended applications for this insert in production? This insert is designed for demanding turning operations involving stainless steels and heat-resistant alloys where thermal resistance, stable chip control and repeatable tool life are priorities; process engineers commonly specify it for both roughing and finishing sequences. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools. The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group.
DCMT070208-MK4 WKK20S Wendeplatten - Walter Tools
Take advantage of a high-performance grade that combines Tiger·tec Silver coating and the WKK20S substrate for reliable machining of cast iron; the result is extended tool life and consistent chip control that supports uninterrupted production. Order or request advice directly from Metav Werkzeuge for application-specific recommendations and rapid, professional assistance. DCMT070208-MK4 WKK20S indexable turning insert — Tiger·tec Silver, for cast iron, Walter Tools The DCMT070208-MK4 WKK20S is an indexable turning insert designed for precision turning of cast iron, offering a coated carbide substrate in a rhombic 55° form for versatile finishing and semi-finishing operations Tiger·tec Silver coating for wear resistance WKK20S grade optimised for cast iron machining MK4 chipbreaker for controlled chip formation Rhombic 55° shape with 0.8 mm corner radius Outstanding wear resistance and consistent tool life The combination of the Tiger·tec Silver coating with the WKK20S grade provides high resistance to the abrasive wear that is typical when machining cast iron. This translates into fewer tool changes and a lower risk of unplanned stoppages; the coated carbide substrate reduces flank wear and preserves the cutting edge, helping to maintain a predictable process window. The measurable benefit is a longer effective cutting life and improved overall equipment effectiveness when turning grey and nodular cast irons. Geometry designed for a balance of robustness and surface quality The rhombic 55° platform and the 0.8 mm corner radius deliver a compromise between cutting-edge strength and the ability to achieve a fine surface finish. A 7° clearance minimises rubbing at the flank face, reducing heat build-up and the tendency for built-up edge in intermittent cuts. The insert’s form factor supports a range of common turning tasks, enabling stable passes with reduced vibration and more consistent dimensional results compared with lesser-optimised grades. Reliable chip control and process security Equipped with the MK4 chipbreaker, the insert creates short, manageable chips when machining abrasive cast iron, which enhances safety and reduces machine interruptions from tangled chips. The tolerance class M ensures reproducible seating and fit in compliant toolholders, contributing to repeatable machining performance and fewer set-up adjustments. Process reliability is enhanced by the insert’s ability to handle typical cast-iron chip behaviour while maintaining edge integrity. Easy integration and productivity gains in production This insert integrates smoothly into standard DCMT-style toolholders and is suitable for workshops aiming to improve throughput without complex retooling. By combining a wear-resistant coating, a cast-iron-optimised grade and a proven chipbreaker geometry, DCMT070208-MK4 WKK20S supports longer cutting intervals and steadier part quality, which can reduce tooling cost per part and increase machine uptime. Further technical data and application recommendations are available on request from Metav Werkzeuge. Contact Metav Werkzeuge for tailored cutting parameters and ordering information on Walter Tools Tiger·tec Silver inserts to optimise cast-iron turning in your production environment — Metav Werkzeuge will advise on holder compatibility and application-specific choices Technical data Article number: DCMT070208-MK4-WKK20S-WALTER Designation: DCMT070208-MK4 WKK20S Manufacturer: Walter Tools Series: Tiger·tec Silver Clearance angle: 7° Corner radius: 0.8 mm Plate size: 07 Plate thickness: 02 Plate form: Rhombus 55° Tolerance class: M Coating: Tiger·tec Silver Substrate: coated carbide Grade: WKK20S Chipbreaker: MK4 Optimised material group: cast iron (K) Execution: T Typical applications: turning, finishing, semi-finishing FAQ Which materials is this insert intended for? The DCMT070208-MK4 WKK20S insert is optimised for machining cast iron, designated by the material group K, and the WKK20S grade is tailored to abrasive cast-iron conditions. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases wear resistance and edge stability on the coated carbide substrate, helping the insert maintain performance during extended cutting operations in cast iron. How does the MK4 chipbreaker affect production? The MK4 chipbreaker produces short, controllable chips when turning cast iron, improving chip evacuation and reducing the risk of chip entanglement that can cause stoppages. Is the insert suitable for finishing passes? Yes; the rhombic 55° form and the 0.8 mm corner radius allow for fine surface finishes while retaining sufficient edge strength for robust performance. Will the insert fit standard DCMT toolholders? The DCMT geometry corresponds to standard DCMT-style toolholders; the DCMT070208-MK4 WKK20S benefits from correct seating and the tolerance class M for repeatable clamping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is original and brand-new from the manufacturer.
DCMT070208-MM4 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Gold coating, a dedicated WMP20G grade and the MM4 chipbreaker for stable cutting edges and reliable chip control; order directly via Metav Werkzeuge or request application advice from our consultants to ensure process security. DCMT070208-MM4 WMP20G indexable turning insert — for rostfreier Stahl, Walter Tools The DCMT070208-MM4 WMP20G is an indexable turning insert engineered for medium to robust machining of rostfreier Stahl, offering a balance of edge stability and consistent chip formation. Tiger‑tec Gold coated grade WMP20G Optimised for stainless steels (ISO M) MM4 chipbreaker for reliable chip control Rhombic 55° shape with 0.8 mm corner radius 7° clearance angle, 2 mm plate thickness Reliable performance for rostfreier Stahl under demanding conditions The combination of the Tiger‑tec Gold coating and the WMP20G grade provides a material system tailored for rostfreier Stahl, a group known for toughness and tendency to produce built-up edge. The specialised coating reduces friction and improves thermal resistance, which leads to a stable cutting edge and extended tool life. In practice, this means fewer insert changes, more consistent part quality and improved productivity in turning operations where heat and adhesion present challenges. The result is a predictable process with reduced downtime and improved cost-efficiency per component. Geometry and chip control that support consistent surface quality Designed with a rhombic 55° outline and an MM4 chipbreaker, the insert delivers concise chip segmentation and evacuation. The 0.8 mm corner radius helps to maintain edge strength while providing the surface finish expected in precision turning tasks. The MM4 chipbreaker aids in controlling the chip flow for a wide range of feeds and depths of cut, reducing the likelihood of surface defects caused by erratic chips. Together, these features improve part quality and lower the risk of secondary operations to correct surface issues. Precision features that increase process security and throughput A clearance angle of 7° and a plate thickness of 2 mm ensure the insert mounts securely while offering the rigidity required for robust cutting conditions. The coated carbide substrate is optimised to withstand temperature peaks typical for rostfreier Stahl machining, supporting repeatable performance across batches. For operations prioritising throughput, the insert’s balanced design contributes to consistent cycle times and reliable tool life, which in turn supports predictable production scheduling and cost calculations. Contact Metav Werkzeuge for tailored application support on Walter Tools Tiger‑tec Gold inserts and ensure optimal process security for rostfreier Stahl machining Technical Data SKU: DCMT070208-MM4-WMP20G-WALTER Label: Drehwendeschneidplatte DCMT070208-MM4 WMP20G Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert Series: Tiger‑tec Gold Grade: WMP20G Chipbreaker: MM4 Core specifications Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: 2 mm Shape: Rhombic 55° Size code: 07 Tolerance class: M Materials & features Coating: Tiger‑tec Gold coated carbide Suitable for: rostfreier Stahl (ISO M) Application focus: medium to robust cutting conditions Chip control: MM4 chipbreaker Manufacturer brand: Walter Tools FAQ What materials is this insert suitable for? The DCMT070208-MM4 WMP20G is formulated for rostfreier Stahl and classified for ISO M applications, making it suitable for stainless steel turning where adhesion and heat are critical factors. What does MM4 chipbreaker provide in practice? The MM4 chipbreaker ensures controlled chip segmentation and evacuation, improving surface finish consistency and reducing the risk of chip-related interruptions during turning operations. How does the Tiger‑tec Gold coating benefit machining? Tiger‑tec Gold enhances thermal resistance and reduces friction at the cutting zone, which supports a stable cutting edge and longer life when machining rostfreier Stahl. Can this insert handle heavy cuts or interrupted cuts? The insert’s 0.8 mm corner radius and robust coated carbide grade deliver edge strength suitable for medium to robust cutting conditions; however, specific process parameters should be validated for heavy or highly interrupted cuts. Which geometry features influence surface quality? The rhombic 55° shape combined with the 0.8 mm corner radius and MM4 chipbreaker contribute directly to chip control and the resulting surface integrity on turned parts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
DCMT070208-MM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a MM4 chipbreaker and a Rhombic 55° geometry for secure chip control and consistent performance in stainless steel turning; order the insert directly via Metav Werkzeuge or consult the team for selection advice. DCMT070208-MM4 WMP20S — Indexable turning insert, Rhombic 55° / 0.8 mm nose radius, Walter Tools The DCMT070208-MM4 WMP20S is an indexable turning insert designed for machining stainless steels under medium to robust conditions, combining a coated-carbide grade with a chipbreaker tuned for reliable chip formation. Tiger·tec Silver coating for secure chip control Optimised for stainless steel (ISO group M) Rhombic 55° form with 0.8 mm nose radius MM4 chipbreaker for stable cutting performance Predictable productivity for stainless steel applications The combination of the Tiger·tec Silver coating and the WMP20S grade targets the specific challenges of machining stainless steel (ISO group M). The coating supports heat resistance and wear protection while the substrate provides mechanical strength; together they promote stable chip formation and reduced risk of built-up edge. This results in fewer interruptions, longer tool life and a more predictable machining process, which helps to improve component throughput and reduce rework in batch production. Geometry and chip control that protect efficiency A Rhombic 55° insert form with a 0.8 mm nose radius and a 7° clearance angle gives a balance between cutting strength and surface finish. The MM4 chipbreaker is engineered to manage swarf behaviour in tougher, sticky materials, ensuring that chips evacuate cleanly and the cutting edge remains stable. For shops aiming to maintain consistent tolerances and surface quality, this geometry translates directly into fewer tool changes and lower per-part machining costs. Format clarity for easy integration and handling The designation DCMT070208-MM4 decodes as a rhombic 55° insert in size 07 with thickness 02, a 0.8 mm nose radius and an integrated MM4 chipbreaker, supplied in the Tiger·tec Silver series by Walter Tools. As an indexable turning insert, it fits standard toolholders made for the DCMT form, enabling straightforward replacement and minimal set-up time. The coated-carbide construction supports repeatable cutting performance and makes the insert suitable for continuous production environments. Contact Metav Werkzeuge for tailored recommendations on Walter Tools turning inserts, availability of DCMT070208-MM4 WMP20S and order assistance: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: DCMT070208-MM4-WMP20S-WALTER Designation: DCMT070208-MM4 WMP20S Type: Indexable turning insert Manufacturer: Walter Tools Facts Nose radius: 0.8 mm Clearance angle: 7° Insert form: Rhombic 55° Insert size: 07 Thickness: 02 Chipbreaker: MM4 Special features Series: Tiger·tec Silver Grade: WMP20S (coated carbide) Application: Suitable for stainless steel (ISO group M) Tolerance class: M Execution: T FAQ Which materials is this insert suitable for? The DCMT070208-MM4 WMP20S is intended for stainless steel (ISO group M) and is optimised for the toughness and heat sensitivity typical of these alloys. What advantages does the Tiger·tec Silver grade provide? The Tiger·tec Silver coating on the WMP20S grade enhances heat and wear resistance while preserving cutting-edge stability, which helps maintain tool life and surface consistency when machining stainless steels. What information is encoded in the DCMT070208-MM4 designation? DCMT refers to a rhombic 55° insert form; 07 denotes the insert size, 02 the thickness, 08 corresponds to the 0.8 mm nose radius and MM4 identifies the chipbreaker geometry incorporated in the insert. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker promotes predictable chip formation and evacuation in demanding materials, reducing the likelihood of chip-related interruptions and supporting steady cutting conditions. Can this insert be used in standard toolholders? Yes, the insert format is compatible with standard toolholders designed for DCMT inserts, allowing simple indexation and quick replacement to minimise downtime. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is original, brand-new goods from the manufacturer Walter Tools.
DCMT070208-MM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of consistent chip control, thermal-resistant Tiger·tec Silver grade and a compact rhombic geometry for reliable turning in demanding alloys; order the DCMT070208-MM4 WSM10S turning insert directly via Metav Werkzeuge or contact the consultants for application advice. DCMT070208-MM4 WSM10S — Turning insert, Tiger·tec Silver, Walter Tools A DCMT070208-MM4 WSM10S turning insert engineered for machining stainless steels and heat‑resistant superalloys, offering robust edge stability and controlled chip formation. Tiger·tec Silver coated carbide grade WSM10S Robust MM4 chipbreaker for secure chip control Rhombic 55° geometry with 0.8 mm corner radius Optimised for stainless steels and superalloys Proven edge stability for demanding materials The combination of the Tiger·tec Silver coating and the WSM10S grade provides enhanced heat resistance and wear protection, which directly benefits performance when machining stainless steels and high‑temperature alloys. The coated carbide substrate reduces flank wear and supports a stable cutting edge under the thermal load typical of these materials. For production environments, this means fewer tool changes and more predictable component quality; the material properties address typical problems such as built‑up edge and rapid flank degradation. Predictable chip control and improved surface finish With the dedicated MM4 chipbreaker and the Rhombic 55° shape, the insert delivers reliable chip segmentation and evacuation, even under interrupted cuts or heavy engagement. The combination of a 0.8 mm corner radius and a 7° clearance angle helps to balance edge strength with surface integrity, producing a consistent finish on the workpiece. As a result, cycle times are often shortened because secondary finishing is reduced and downstream processes require less rework. Flexible integration and reduced set‑up time The indexable DCMT form offers a straightforward replacement routine and multiple usable cutting edges, promoting economical tool use across batches. Tolerance class M and the standardised geometry make the insert compatible with common toolholders and turning systems, simplifying tool inventory and reducing set‑up complexity. Where mixed production runs occur, the insert’s versatility for both roughing and semi‑finishing operations supports leaner tooling strategies and lower downtime between jobs. Productivity gains through longer life and process reliability Designed for applications where process security is paramount, the insert’s coated surface and engineered chip control support extended tool life and consistent productivity. The stable cutting behaviour reduces the frequency of unplanned interventions and contributes to a predictable machining window. For workshops aiming to increase throughput without sacrificing component quality, the insert offers an attractive balance of performance and operational economy. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver turning solutions — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: DCMT070208-MM4-WSM10S-WALTER Product: Drehwendeschneidplatte (turning indexable insert) Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM10S Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 07 Thickness code: 02 Geometry: Rhombic 55° Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Chipbreaker: MM4 Base material: coated carbide Material groups: S / M Suitable for: stainless steels, superalloys and heat‑resistant alloys Designation without grade: DCMT070208-MM4 FAQ What materials is this insert suitable for? The DCMT070208-MM4 WSM10S insert is optimised for stainless steels (ISO group M) and heat‑resistant superalloys (ISO group S), as indicated by the WSM10S grade and the Tiger·tec Silver coating. Which chipforming behaviour can be expected with this geometry? The MM4 chipbreaker paired with the rhombic 55° shape provides controlled segmentation and reliable evacuation, resulting in predictable chips and stable cutting forces when using the insert from Walter Tools. Is the insert compatible with standard DCMT toolholders? Yes, the DCMT form and tolerance class M are designed for compatibility with standard indexable turning toolholders that accept the DCMT070208 geometry. Can this insert be used for finishing operations? With a 0.8 mm corner radius and the coated grade, the insert is suitable for semi‑finishing and certain finishing passes; however, final surface requirements and cutting parameters will dictate optimal use. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating increases thermal and wear resistance, which extends cutting edge life and contributes to consistent process reliability across batch production using the Walter Tools insert. Walter AG (brand: Walter Tools) is part of the Sandvik Group and is recognised for precision tools and reliable performance. Protected trademarks and trade names are the property of their respective owners; brand names are used solely for identification and explanatory purposes and do not imply any affiliation. The offered item is an original, factory‑new product from the manufacturer. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DCMT070208-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Combining Tiger·tec Silver coating with the WSM20S grade delivers stable cutting edges and reliable chip control for stainless steel and high-temperature superalloys; benefit from improved tool life and consistent part quality by selecting this insert from Metav Werkzeuge or consult our specialists for application advice. DCMT070208-MM4 WSM20S – Rhombic 55° turning insert, Tiger·tec Silver (Walter Tools) The DCMT070208-MM4 WSM20S is a coated rhombic 55° turning insert designed for demanding machining of stainless steel and heat-resistant alloys, offering consistent edge stability in heavy or interrupted cuts. Tiger·tec Silver coating for long tool life WSM20S grade for stainless steel and superalloys MM4 chipbreaker for controlled chip formation Rhombic 55° geometry for versatile turning Increase productivity through a durable coating and robust grade The combination of the Tiger·tec Silver technology and the WSM20S carbide grade provides a measurable improvement in wear resistance and process consistency. As a coated carbide insert, it resists thermal softening and maintains a sharp cutting edge under increased temperatures commonly encountered when machining stainless steel or nickel‑based alloys. This translates into longer intervals between tool changes and fewer rejects, supporting a smoother production flow and lower overall machining cost per component. Secure chip control and stable cutting for difficult materials Built around the MM4 chipbreaker, the insert promotes predictable chip control, reducing the risk of built-up edge and uncontrolled swarf. For materials classified under ISO groups M and S, this geometry helps evacuate chips efficiently and protects the cutting edge from thermal and mechanical overload. In practical terms, machinists benefit from fewer interruptions for chip clearing and more reproducible surface quality when processing stainless steel and heat‑resistant superalloys. Geometry and tolerances that support consistent part quality The rhombic 55° shape with a 0.8 mm corner radius and 7° clearance provides a reliable compromise between strength and finish; the radius supports edge robustness while the relief angle reduces rubbing and heat generation. The insert’s tolerance class M ensures repeatable mounting and dimensional stability in the toolholder, promoting consistent workpiece accuracy across batches. Use of this insert in appropriate tool assemblies yields repeatable results and supports higher first‑pass yields. For application-specific recommendations on tooling setups for Walter Tools inserts, contact Metav Werkzeuge for expert guidance and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DCMT070208-MM4-WSM20S-WALTER SKU: DCMT070208-MM4-WSM20S-WALTER Manufacturer: Walter Tools ISO designation: DCMT070208-MM4 WSM20S Series: Tiger·tec Silver Core specifications Clearance angle: 7° Corner radius: 0.8 mm Insert size: 07 Insert thickness: 02 Insert shape: Rhombic 55° Tolerance class: M Materials & special features Coating technology: Tiger·tec Silver Chipbreaker: MM4 Substrate: coated carbide Suitable for: stainless steel (M) and heat‑resistant superalloys / titanium (S) Execution: T FAQ What materials is this insert suited for? The DCMT070208-MM4 WSM20S insert is suitable for stainless steel and heat‑resistant superalloys, with the WSM20S grade optimised for secure chip formation and edge stability in these groups. How does the MM4 chipbreaker improve machining? The MM4 chipbreaker on this insert controls chip form and evacuation, reducing built‑up edge and improving surface finish when machining stainless steel and similar difficult materials. What does the Tiger·tec Silver series provide? Tiger·tec Silver offers enhanced thermal resistance and wear protection; the coating on the insert increases tool life and helps maintain cutting performance under elevated temperatures. Is the insert compatible with standard toolholders for DCMT geometry? The insert follows standard DCMT geometry dimensions (rhombic 55°), enabling use in compatible toolholders designed for this insert type; ensure correct seat and clamping for repeatable results. What role does the 0.8 mm corner radius play? A 0.8 mm corner radius balances edge strength and surface finish, supporting interrupted cuts and extending edge life without significantly compromising dimensional tolerance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names are cited for explanation only; there is no affiliation between our company and the named manufacturers. The offered item is an original, brand‑new product from Walter Tools. The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group.
DCMT070208-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the MP4 chipbreaker to secure consistent chip control and extended tool life in steel turning – reliable performance that supports productive machining. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. DCMT070208-MP4 WPP10G indexable insert by Walter Tools — Tiger·tec Gold, for steel machining The DCMT070208-MP4 WPP10G is a rhombic 55° indexable insert designed for turning steel, combining a Tiger·tec Gold coated carbide grade with an MP4 chipbreaker for stable chip formation and predictable wear behaviour Tiger·tec Gold coated carbide for long life MP4 chipbreaker for controlled chip formation Rhombus 55° geometry for versatile turning 7° clearance angle for secure cutting Corner radius 0.8 mm for fine surface finish Higher output through consistent chip control and coating technology The combination of a Tiger·tec Gold coating and the MP4 chipbreaker provides a measurable advantage in continuous production. The coating enhances resistance to abrasive wear and thermal loading, while the chipbreaker directs chips away from the cutting zone to reduce interruptions. This results in fewer tool changes and more uninterrupted cutting cycles when machining steel, supporting a higher effective machine utilisation. The coated carbide substrate also contributes to repeatable edge life under common turning parameters. Precision geometry for stable cutting and surface quality The rhombus 55° form with a 7° clearance angle and a 0.8 mm corner radius is engineered to balance edge strength and surface finish. The small corner radius supports improved surface integrity on turned components, while the rhombic geometry enables multiple indexing positions for efficient use of the cutting edge. For applications demanding consistent dimensional results and good finish on steel workpieces, this geometry reduces vibration and helps maintain process stability over longer engagements. Practical benefits explained for production planning The insert is classified in tolerance class M and is available in the widely used ISO designation, which simplifies toolholder selection and inventory management. As a coated, indexable cutting grade optimised for steel, it covers a broad range of common steels – from general-purpose to moderately wear-prone grades – enabling flexible setup choices without compromising productivity. The MP4 chipbreaker is tuned to produce manageable chips at standard cutting speeds, lowering the risk of chip entanglement and improving cycle-time reliability. Reliability and brand performance for workshop standards Produced under the Walter Tools family, this indexable solution reflects an emphasis on process security and predictable performance. The coated carbide grade supports repeatable machining cycles and a controlled wear progression, which helps planners forecast tool life and schedule maintenance more accurately. For manufacturers seeking an insert that combines durability with consistent chip behaviour, the product offers a solid choice that aligns with modern production demands and lean tooling strategies. For application advice, technical compatibility checks or to place an order for the Walter Tools DCMT070208-MP4 WPP10G insert, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number / SKU: DCMT070208-MP4-WPP10G-WALTER ISO designation: DCMT070208-MP4 WPP10G Product type: Indexable turning insert (rhombic 55°) Series: Tiger-tec Gold Grade / sort: WPP10G Manufacturer: Walter Tools Numbers / core technical data Clearance angle: 7° Corner radius: 0.8 mm Plate size: 07 Plate thickness: 02 Tolerance class: M Designs / special features Coating: Tiger·tec Gold Chipbreaker: MP4 Shape: Rhombus 55° Ground for turning of steel (P) Execution: T FAQ What materials is this insert suitable for? The DCMT070208-MP4 WPP10G insert is optimised for machining steel (ISO group P) and is designed to handle the thermal and chip-formation characteristics typical of steel turning. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker on the Walter Tools insert promotes controlled chip formation and evacuation, reducing the likelihood of long, tangled chips and improving process stability in continuous turning operations. Can the insert achieve a good surface finish on parts? Yes. With a 0.8 mm corner radius and the rhombic 55° geometry, the insert supports improved surface integrity and consistent finish quality on turned steel components. Is the coated grade suitable for high cutting speeds? The Tiger·tec Gold coating enhances wear resistance and thermal stability, which supports operation at elevated cutting speeds typical for many steel turning applications; cutting parameters should be selected according to workpiece grade and machine capability. How many indexing positions are available with the rhombus 55° shape? The rhombic 55° geometry provides multiple usable cutting edges per insert, allowing for economical edge utilisation and reduced tool change frequency. What does tolerance class M indicate for the insert? Tolerance class M refers to the dimensional and geometric tolerance level of the insert, ensuring reliable fit and repeatability when seated in compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT070208-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
High-performance machining with the WPP20G grade and Tiger‑tec Gold coating ensures stable chip formation and extended tool life; combined with the MP4 chipbreaker and rhombic geometry, the insert delivers versatile, reliable turning of Stahl. Order directly via Metav Werkzeuge or consult the specialists for application support and specification advice. DCMT070208-MP4 WPP20G indexable turning insert (Rhombic 55°, MP4) – Walter Tools A DCMT070208-MP4 WPP20G indexable turning insert engineered for general-purpose and medium turning of Stahl with a Tiger‑tec Gold coated carbide grade. Tiger‑tec Gold coated grade WPP20G Optimised MP4 chipbreaker for secure chips Rhombic 55° geometry for versatile turning 7° clearance angle with 0.8 mm radius Consistent productivity for Stahl turning through coating technology The combination of the WPP20G grade and Tiger‑tec Gold coating is designed to manage the thermal and mechanical demands typical of machining Stahl. This coated carbide formulation supports stable chip formation and improved resistance to flank and crater wear, which translates into fewer tool changes and longer uninterrupted cycles. On machines with moderate to high spindle speeds the coating reduces friction and helps maintain cutting-edge integrity, enabling predictable, repeatable performance in production environments. Geometry and chip control for reliable surface finish and process stability The Rhombic 55° insert form together with the MP4 chipbreaker delivers a balance between access and strength: the geometry permits good approach angles for a range of turning operations while the chipbreaker shapes and evacuates chips consistently. A corner radius of 0.8 mm and a 7° clearance angle support dimensional stability and a quality surface finish on turned components. For workshops seeking to reduce secondary operations, the controlled chip flow and robust nose radius help achieve target tolerances with fewer passes. Lower operating costs and predictable tool life for industrial workflows Using a coated, modern carbide grade such as WPP20G reduces the frequency of insert replacements and supports higher material removal rates where appropriate, improving overall cost-efficiency. The design is optimised for a broad coverage within the ISO P group, meaning the insert is well suited to many Stahl grades encountered in everyday production. Process planners will value the combination of long-lasting cutting edges and consistent chip behaviour, which together help reduce machine downtime and increase throughput. For tailored application advice or to specify Walter Tools indexable inserts for Stahl applications, contact Metav Werkzeuge for expert recommendations and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DCMT070208-MP4-WPP20G-WALTER Description: Drehwendeschneidplatte / indexable turning insert DCMT070208-MP4 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Core specifications Clearance angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 55° Plate size: 07 Thickness code: 02 Tolerance class: M Features Grade: WPP20G Chipbreaker: MP4 Coating / type: Tiger‑tec Gold (coated carbide) Material suitability: Stahl (ISO P) Execution: T ISO designation: DCMT070208-MP4 WPP20G FAQ What materials is this insert suitable for? The DCMT070208-MP4 WPP20G insert is intended primarily for Stahl (ISO group P); the WPP20G grade and Tiger‑tec Gold coating are optimised for the thermal and chip-forming characteristics of these materials. How does the MP4 chipbreaker improve process stability? The MP4 chipbreaker on the DCMT070208-MP4 WPP20G shapes and controls chips to prevent entanglement and aid evacuation, which contributes to consistent cutting forces and improved surface quality when machining Stahl. Which operations benefit most from the Rhombic 55° form? The Rhombic 55° geometry gives versatile approach angles suitable for a range of turning tasks, including light profiling and finishing passes where a balance of access and edge strength is required. Is this insert compatible with standard clamping systems and holders? The DCMT070208-MP4 WPP20G follows standard indexable insert dimensions and ISO designation, making it compatible with holders and clamping systems designed for DCMT 07-style inserts. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, brand-new product from Walter Tools.
DCMT070208-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Take advantage of a proven combination of high process reliability and stable chip control thanks to the Tiger·tec Gold cutting grade and the RM4 chipbreaker; the insert supports robust machining of stainless steel while maintaining edge life and surface quality. Order directly via Metav Werkzeuge or consult our technical team for application-specific advice. DCMT070208-RM4 WMP20G turning insert, Tiger·tec Gold, for stainless steel – Walter Tools A DCMT070208-RM4 WMP20G turning insert engineered for reliable, repeatable performance when machining rostfreier Stahl under medium to robust cutting conditions Tiger·tec Gold coating technology Optimised RM4 chipbreaker design 7° relief angle for secure cutting 0.8 mm corner radius for robustness Maximise process reliability and productivity The grade is based on Tiger·tec Gold coated carbide and the WMP20G specification, designed to improve tool life and maintain a stable cutting edge when machining stainless steel. The combination of a tailored coating and a robust substrate reduces flank wear and supports higher cutting speeds where appropriate, resulting in measurable productivity gains. In production environments where consistent cycle times and repeatable component quality are required, the coated grade and geometry contribute to fewer tool changes and a smoother production flow. Consistent chip control for demanding stainless applications The RM4 chipbreaker and the rhombus 55° form factor provide controlled chip formation and evacuation during turning operations on tough, heat-generating alloys. A 7° relief angle and a 0.8 mm corner radius balance strength with cutting performance, reducing the risk of build-up edge on difficult-to-machine materials. This geometry helps secure chip flow and surface finish, limiting process interruptions and supporting a stable machining window under varying cutting parameters. Practical handling, clamping and application benefits The insert's standard ISO designation and compact plate size make integration into established toolholders straightforward, supporting quick index changes and simple inventory management. The coated carbide composition is suited for medium to robust cutting conditions and is a reliable option where stable chip formation and edge security are priorities. Process engineers and operators benefit from reduced set-up complexity and predictability in cycle time calculations when this grade is specified for rostfreier Stahl applications. Contact Metav Werkzeuge for tailored advice on selecting the appropriate Walter Tools Tiger·tec Gold inserts; technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss tooling strategies and application parameters Technical data Article number: DCMT070208-RM4-WMP20G-WALTER Designation: DCMT070208-RM4 WMP20G Type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Relief angle: 7° Corner radius: 0.8 mm Plate size: 07 Plate thickness: 02 Tolerance class: M Plate form: Rhombus 55° Special features Chipbreaker: RM4 Grade: WMP20G (coated carbide) Application focus: rostfreier Stahl (stainless steel) Typical use: medium to robust machining conditions ISO designation: DCMT070208-RM4 WMP20G FAQ What materials is this insert suitable for? This DCMT070208-RM4 WMP20G insert is specified for machining rostfreier Stahl (stainless steel) and is optimised for medium to robust cutting conditions. What is the main benefit of the Tiger·tec Gold grade? The Tiger·tec Gold coating on this grade enhances edge stability and wear resistance, extending tool life in demanding stainless steel turning applications. How does the RM4 chipbreaker affect process stability? The RM4 chipbreaker promotes predictable chip formation and evacuation, reducing risk of build-up edge and supporting consistent surface quality during turning. Is the geometry compatible with standard holders? The rhombus 55° form and ISO designation DCMT070208-RM4 allow straightforward use in compatible turning toolholders designed for this plate format. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are referenced for explanation only. There is no affiliation between our company and the named manufacturers. The offered article is original factory-new merchandise of the manufacturer. The Walter AG (market appearance: Walter Tools) is part of the Sandvik Group and is recognised for precision tools and reliable tooling solutions.
DCMT070208-RM4 WSM10S RM4 Wendeplatten - Walter Tools
Take advantage of Tiger·tec Silver performance and the RM4 chipbreaker to secure stable chip control and extended tool life in the turning of stainless steels and high-temperature alloys — order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DCMT070208-RM4 WSM10S turning insert by Walter Tools — Tiger·tec Silver coating, 7° clearance, 0.8 mm corner radius The DCMT070208-RM4 WSM10S is a rhombic 55° indexable turning insert engineered for reliable machining of stainless steels and heat‑resistant superalloys in production and job‑shop environments Tiger·tec Silver coated for long tool life Optimised chipbreaker RM4 for stable chip control 7° clearance and 0.8 mm corner radius Rhombic 55° insert for general turning operations Consistent performance on stainless steels and superalloys The Tiger·tec Silver WSM10S grade combines a wear‑resistant coating with a substrate tuned for heat resistance, enabling secure cutting in materials that typically cause edge build‑up and thermal loading. This composition supports a stable cutting edge and promotes predictable flank wear, which translates into fewer tool changes and higher machine uptime. For shops processing rostfreier Stahl and nickel‑based alloys, the result is improved process reliability and a measurable increase in productive cutting time. Geometry designed for accuracy and surface quality The rhombic 55° geometry and 0.8 mm corner radius offer an effective compromise between edge strength and finish quality. The 7° clearance reduces rubbing at the flank while maintaining a defined cutting edge for consistent dimensions. These geometry choices help to produce repeatable surface finishes and allow operators to select conservative or aggressive cutting data depending on component tolerances. The insert size (07) and plate thickness (02) are matched to common toolholder systems, simplifying integration into existing turning setups and reducing set‑up time. Process efficiency through chip control and durability Equipped with the RM4 chipbreaker, the insert actively breaks and evacuates chips under a wide range of cutting conditions, reducing recutting and stabilising forces at the tool‑workpiece interface. The combined effect of robust chip control and the Tiger·tec Silver technology is lower tooling consumption and a higher production throughput per cutter body. In practical terms, this means fewer interruptions for tool indexation and a steadier flow through the production cell — an advantage for repetitive and batch turning tasks where cycle time and repeatability drive competitiveness. For process‑critical turning tasks, contact Metav Werkzeuge to specify the optimal insert grade and ensure availability of Walter Tools Tiger·tec Silver inserts; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: DCMT070208-RM4-WSM10S-WALTER SKU: DCMT070208-RM4-WSM10S-WALTER Product type: Drehwendeschneidplatte (turning insert) Brand: Walter Tools Series: Tiger-tec Silver Grade: WSM10S Facts Free angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 55° Plate size: 07 Plate thickness: 02 Special features Coating: Tiger·tec Silver Chipbreaker: RM4 Material suitability: S / M (superalloys, stainless steels) Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The DCMT070208-RM4 WSM10S insert is suited for stainless steels (M) and heat‑resistant superalloys/titanium (S), benefitting from the Tiger·tec Silver technology for stable chip formation. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker delivers controlled chip segmentation and evacuation, reducing recutting and helping to maintain dimensional stability during longer cuts with the DCMT070208-RM4 WSM10S insert. What production benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver increases thermal resistance and wear protection of the WSM10S grade, resulting in extended tool life and more consistent cutting performance in demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the brands cited. The offered item is original, factory‑new merchandise from the manufacturer (Walter Tools).
DCMT070208-RM4 WSM20S T Wendeplatten - Walter Tools
High process security and consistent cutting-edge behaviour are delivered by the Tiger·tec Silver coating and the WSM20S grade combined with the RM4 chipbreaker; the rhombic 55° geometry and a 0.8 mm corner radius provide stable cuts in stainless steel and heat‑resistant alloys. Order the DCMT070208-RM4 WSM20S directly via Metav Werkzeuge or consult our specialists for tailored application advice. DCMT070208-RM4 WSM20S – Indexable turning insert, Tiger·tec Silver, Walter Tools The DCMT070208-RM4 WSM20S is an indexable turning insert engineered for secure, repeatable machining of stainless steel and heat‑resistant superalloys in demanding production environments. Tiger·tec Silver coated for high process security Optimised RM4 chipbreaker for stable chip control Rhombic 55° geometry for versatile turning operations 0.8 mm corner radius with 7° clearance for edge stability Longer tool life through thermal and wear resistance The combination of the Tiger·tec Silver coating with the WSM20S grade creates a coated carbide system designed to withstand the high temperatures and adhesive tendencies of stainless steel. This results in improved edge stability and reduced flank wear compared with uncoated grades, so fewer indexings and longer production runs are achievable. For production planners this means more predictable tool cycles and fewer unscheduled interventions while machining tough alloys. Reliable chip control for uninterrupted turning operations The insert’s RM4 chipbreaker is optimised for secure chip control, especially when cutting materials that tend to form long or welded chips. A reliable chip geometry reduces the risk of rework, tool damage and machine stoppages; it also supports consistent surface quality on the workpiece. The insert’s chip evacuation performance contributes directly to higher machine uptime and a smoother, more efficient workflow on the shop floor. Geometry that combines versatility with stability The rhombic 55° form and a 0.8 mm corner radius provide a balance between cutting strength and flexibility for a wide range of turning tasks. The moderate nose radius supports finishing while retaining adequate robustness for light roughing, and the 7° clearance helps to prevent rubbing and build‑up of edge material. This geometry allows the insert to be used for external turning, light profiling and facing operations with improved repeatability. Practical selection and integration in production With a tolerance class M and an execution suited to demanding materials, the insert is a practical choice for series production and jobbing alike. The WSM20S grade is specifically targeted at stainless steel and the S group of heat‑resistant alloys and titanium, offering a good compromise between wear resistance and toughness. For cutting parameters, start with conservative feeds and speeds and increase once process behaviour is proven; further optimisation and application tables are available on request. Technical queries are welcome — Metav Werkzeuge can provide cutting data and application support by email or phone. For practical advice on integrating Walter Tools Tiger·tec Silver inserts into production, contact Metav Werkzeuge for application recommendations and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DCMT070208-RM4-WSM20S-WALTER Designation: DCMT070208-RM4 WSM20S Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger‑tec Silver Facts Clearance angle: 7° Corner radius: 0.8 mm Plate size: 07 Plate thickness: 02 Plate form: Rhombus 55° Chipbreaker: RM4 Tolerance class: M Execution: T Special features Coating: Tiger·tec Silver Grade: WSM20S (coated carbide) Suitable for: stainless steel (M), superalloys and titanium (S) Optimised for stable chip formation and process security Robust cutting edge for production machining FAQ Which materials is this insert best suited for? The DCMT070208-RM4 WSM20S insert from Walter Tools is designed principally for stainless steel and for heat‑resistant superalloys and titanium, providing controlled wear and thermal resistance in these groups. How does the RM4 chipbreaker improve machining? The RM4 chipbreaker on this insert promotes reliable chip control and evacuation, reducing the likelihood of chip entanglement and enabling steadier surface finishes during continuous turning operations. What advantages does the Tiger·tec Silver coating bring? Tiger·tec Silver on the WSM20S grade enhances thermal stability and wear resistance, which together contribute to longer tool life and consistent cutting performance when machining demanding materials. Why choose a rhombic 55° geometry and 0.8 mm corner radius? The rhombic 55° geometry combined with a 0.8 mm corner radius offers a compromise between cutting strength and finishing capability, suitable for a variety of turning applications while maintaining edge robustness. Are there any recommendations for initial cutting data? Begin with conservative speeds and feeds tailored to stainless steel or superalloys and increase gradually as process behaviour stabilises; Metav Werkzeuge can supply application sheets and cutting parameters for the WSM20S grade. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered designations are mentioned for explanatory purposes only; no association between our company and the named brands is implied. The offered article is an original, factory‑new product of the manufacturer.
DCMT070208-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the RM4 chipbreaker, the insert offers stable chip formation and extended edge life for machining stainless steel and high-temperature alloys; order the DCMT070208-RM4 WSM30S directly via Metav Werkzeuge or request an application consultation from the technical team. DCMT070208-RM4 WSM30S Drehwendeschneidplatte – Tiger·tec Silver grade for stainless steel and superalloys | Walter Tools A DCMT070208-RM4 WSM30S indexable turning insert engineered for consistent performance in demanding turning operations on stainless steel and heat-resistant superalloys. Tiger·tec Silver coated grade WSM30S RM4 chipbreaker for stable chip control 7° clearance and 0.8 mm corner radius Rhombic 55° form, size 07, thickness 02 Reliable chip control that reduces interruptions The combination of the RM4 chipbreaker and the coating technology provides predictable chip formation under difficult cutting conditions. Stable chips lower the risk of entanglement and machine stoppages, which improves uptime in production environments. As a result, cycle times become more consistent and finishing operations benefit from fewer irregularities. This turning insert is optimised for processes where controlled chip flow directly affects productivity. Coating and grade designed for thermal and mechanical stress The WSM30S grade, part of the Tiger·tec Silver series, is a coated carbide developed for materials that challenge cutting edges. The coating increases wear resistance and supports heat management during interrupted cuts and high-contact temperatures. For applications involving stainless steel and similar alloys, this results in longer tool life and fewer insert changes, contributing to predictable tooling costs and a more stable machining process. Geometry that supports precision and accessibility The Rhombic 55° profile with a 0.8 mm corner radius and 7° clearance angle balances strength and accessibility for turned features. The geometry allows close approach to shoulders and threads while maintaining edge robustness where required. Size designation 07 and thickness code 02 deliver a compact but rigid insert that integrates well into standard toolholders, enabling precise dimensional control and consistent surface quality in serial production. Process integration and consistent part quality Tolerance class M ensures reproducible insert dimensions and seating in the toolholder, which supports repeatable machining results. The combination of grade, chipbreaker and geometry reduces variability in batch processes and helps maintain surface finish specifications. For further process matching or optimisation, Metav Werkzeuge provides technical guidance and can advise on insert selection for specific stainless steel grades or heat-resistant alloys. For application advice on Walter Tools Tiger·tec Silver inserts such as the DCMT070208-RM4 WSM30S, contact Metav Werkzeuge for tailored recommendations and process support by email or phone. Technical data Article number: DCMT070208-RM4-WSM30S-WALTER Label: Drehwendeschneidplatte DCMT070208-RM4 WSM30S Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM30S Chipbreaker: RM4 Designation: DCMT070208-RM4 Facts Corner radius: 0.8 mm Clearance angle: 7° Plate form: Rhombus 55° Plate size: 07 Thickness code: 02 Tolerance class: M Special features Coating: Tiger·tec Silver Material application groups: S / M Intended materials: stainless steel and heat-resistant superalloys Execution code: T Series description: coated carbide grade for demanding materials FAQ Which materials is this insert suitable for? The DCMT070208-RM4 WSM30S from Walter Tools is suitable for stainless steel and heat-resistant superalloys, reflecting its classification in groups M and S. What advantage does the RM4 chipbreaker provide? The RM4 chipbreaker on the DCMT070208-RM4 WSM30S promotes stable chip formation, which improves process reliability and reduces machine interruptions during turning. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating on the WSM30S grade enhances wear resistance and thermal stability, extending edge life under challenging cutting conditions. Is the insert compatible with standard toolholders? The Rhombic 55° form and size 07 are standard geometries designed for common turning toolholders; tolerance class M supports repeatable seating and dimensional accuracy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel von Walter Tools um originale fabrikneue Waren des Herstellers.
DCMT070208-RP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold performance and the wear-resistant WPP10G grade to boost productivity in steel turning; the RP4 chipbreaker and a 0.8 mm corner radius deliver stable cutting and improved surface quality. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. DCMT070208-RP4 WPP10G turning insert — Tiger·tec Gold, Rhombic 55° (Walter Tools) DCMT070208-RP4 WPP10G is a rhombic 55° turning insert optimised for steel machining, offering a Tiger·tec Gold coating, RP4 chip control and a robust 0.8 mm corner radius. Tiger·tec Gold coating for long tool life WPP10G grade optimised for steel machining RP4 chipbreaker for reliable swarf control Rhombic 55° form with 0.8 mm corner radius Greater process efficiency through advanced coating and grade The combination of the Tiger·tec Gold technology and the WPP10G carbides ensures a durable cutting edge that resists wear under the thermal and mechanical loads typical of steel machining. As a coated carbide grade, the insert sustains consistent cutting performance over longer intervals, reducing tool changes and contributing to lower part cost per component. This makes it suitable for mixed production runs where a balance of wear resistance and toughness is required. Reliable chip control and consistent surface quality The RP4 chipbreaker geometry and the rhombic 55° shape promote dependable chip formation and evacuation, resulting in fewer interruptions and improved surface finish. The 0.8 mm corner radius increases edge strength for interrupted cuts while still allowing acceptable finish levels, and the 7° clearance angle supports stable tool engagement. These geometric choices translate into predictable results on steel, both for semi-finish and general turning operations. Workshop integration and practical advantages Built to the DCMT format, the insert fits standard toolholders that accept rhombic 55° indexable inserts, enabling straightforward integration into existing toolsets. The tolerance class M supports consistent seating and repeatable positioning, which is important for achieving tight component tolerances. Given its designation and series, the insert is intended primarily for machining steel (ISO group P), offering a pragmatic option for shops seeking a productive, easy-to-use indexable solution from a recognised manufacturer. Contact Metav Werkzeuge for personalised cutting data and stock availability for the Walter Tools Tiger·tec Gold DCMT070208-RP4 WPP10G insert; Metav Werkzeuge will advise on the best grade and parameters for the intended steel application — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: DCMT070208-RP4-WPP10G-WALTER Manufacturer: Walter Tools Article designation: DCMT070208-RP4 WPP10G Product type: turning insert Facts Clearance angle: 7° Corner radius: 0.8 mm Insert shape: Rhombic 55° Size code: 07 Thickness code: 02 Tolerance class: M Special features Grade: WPP10G (Tiger·tec Gold) Chipbreaker: RP4 Coating: coated carbide Material application: Steel (ISO group P) Series: Tiger·tec Gold FAQ What materials is this insert intended for? The DCMT070208-RP4 WPP10G insert from Walter Tools is specified for machining steel (ISO group P) and is tuned for the typical heat and chip-formation behaviour of steel alloys. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, which reduces recutting of swarf and helps maintain consistent surface quality during turning. Is the 0.8 mm corner radius suitable for interrupted cuts? A 0.8 mm corner radius provides a compromise between edge strength and finish; for occasional interruptions it offers improved robustness while still enabling acceptable surface quality. What does the Tiger·tec Gold designation mean in practice? Tiger·tec Gold indicates a coated carbide technology that prioritises wear resistance and stable cutting-edge behaviour, translating into longer tool life and fewer tool changes for steel applications. Can this insert be indexed during production? Yes — the DCMT format allows multi-edge indexing; the tolerance class M supports repeatable seating and consistent repositioning in compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT070208-RP4 WPP20G RP4 Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and the WPP20G grade for efficient steel turning; the combination of a proven RP4 chipbreaker and a robust 0.8 mm corner radius ensures stable chip control and long tool life. Order the insert via Metav Werkzeuge or consult their team for application guidance. DCMT070208-RP4 WPP20G indexable turning insert for steel — Walter Tools A DCMT070208-RP4 WPP20G indexable turning insert engineered for steel machining, featuring Tiger·tec Gold coated carbide and an RP4 chipformer for reliable performance. Tiger·tec Gold coated carbide grade WPP20G Optimised RP4 chipbreaker for stable chip control Rhombic 55° geometry with 7° clearance 0.8 mm corner radius for reliable edge strength Consistent wear resistance for steel machining The Tiger·tec Gold coating combined with the WPP20G grade provides a balanced mix of wear resistance and toughness optimised for machining steel (ISO group P). Coated carbide means a thin, engineered layer on a cemented carbide substrate that reduces friction and increases thermal resistance during cutting; the result is more predictable flank wear and extended usable life compared with uncoated grades. This makes the insert particularly suitable for a wide range of turning applications where process stability and repeatable results are required. Geometry and chip control that improve surface quality The rhombic 55° shape paired with a 7° clearance angle and the RP4 chipbreaker delivers consistent chip formation and evacuation. The chipbreaker design directs chips into short, controllable segments at typical steel cutting conditions, reducing risk of built-up edge and improving surface finish. The 0.8 mm corner radius enhances edge strength for interrupted cuts and adds robustness for light roughing and finishing passes, supporting higher metal removal rates without sacrificing dimensional accuracy. Practical benefits for production and tool management Designed within tolerance class M and supplied in the proven DCMT geometry, this insert supports reproducible set-ups and straightforward indexation. The Tiger·tec Gold technology reduces downtime through longer edge life, while the universal WPP20G sort is aimed at both general-purpose and wear-resistant applications in steel. For workshops seeking a reliable balance between performance and economy, the insert supports consistent cycle times and fewer tool changes, contributing to predictable production throughput. For process-oriented machining with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for ordering and technical advice: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DCMT070208-RP4-WPP20G-WALTER Designation: DCMT070208-RP4 WPP20G Brand: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Plate size code: 07 Thickness code: 02 Geometry: Rhombic 55° Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: RP4 Series: Tiger-tec Gold Application group: ISO P (steel) Execution: T FAQ What materials is this insert suitable for? The DCMT070208-RP4 WPP20G insert is specified for ISO group P, meaning it is suitable for machining various steels. How does the Tiger·tec Gold coating benefit performance? Tiger·tec Gold on the DCMT070208-RP4 WPP20G enhances thermal stability and wear resistance, improving edge life and reducing downtime in steel turning operations. What does the RP4 chipbreaker provide during turning? The RP4 chipbreaker on this Walter Tools insert produces short, controlled chips in typical steel cutting conditions, which aids evacuation and improves surface finish. Can this insert be used for finishing and light roughing? Yes; the rhombic 55° geometry combined with a 0.8 mm corner radius makes the insert suitable for both finishing and light roughing tasks in steel. Is the geometry compatible with standard DCMT tool holders? The insert follows the DCMT070208 form factor and is compatible with tool holders designed for DCMT inserts of the same size and clamping style. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only and do not indicate any affiliation with our company. The offered item is an original, factory-new product of the manufacturer.
DCMT070208-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of Tiger‑tec Gold wear resistance and the RP4 chipformer to secure stable, productive turning in steel; combine reliable edge strength and versatile geometry for continuous production. Order the DCMT070208-RP4 WPP30G directly via Metav Werkzeuge or ask our consultants for application-specific advice. DCMT070208-RP4 WPP30G – indexable turning insert, Tiger‑tec Gold, for steel (Walter Tools) The DCMT070208-RP4 WPP30G is an indexable turning insert engineered for general steel turning, combining a Tiger‑tec Gold coating with an RP4 chipformer for consistent chip control and long tool life Tiger‑tec Gold coating for extended life Suitable for steel machining (ISO P) Rhombic 55° geometry for versatile turning 0.8 mm corner radius for reliable edge strength Consistent cutting performance and extended tool life The coated grade WPP30G, part of the Tiger‑tec Gold family, is a coated carbide solution optimised for machining steel. Its design focuses on reduced flank wear and a stable cutting edge, which translates into longer intervals between index changes and lower process costs. The combination of advanced coating technology and a robust substrate supports higher cutting speeds and more predictable tool life, improving throughput in repetitive turning tasks. Controlled chips and process security for fewer interruptions Equipped with the RP4 chipformer, the insert promotes consistent chip formation in common steel turning applications. Predictable chip shapes reduce the risk of built-up edge and machine stoppages, which helps maintain cycle times and surface quality. For production environments where process stability and reproducible results matter, this chip control contributes directly to reduced rework and less machine downtime. Geometry that supports flexible turning operations The Rhombus 55° shape and a 0.8 mm corner radius deliver a balance between accessibility and edge strength for external and light profiling operations. A 7° relief angle aids smooth engagement and prevents premature edge breakdown under typical turning feeds. The insert’s tolerance class M ensures a consistent fit and repeatability in standard toolholders, making it suitable for both serial production and varied job‑shop work. Practical integration and operator advantages As an indexable insert designed for routine steel turning, this product integrates easily into existing tool systems and is suitable for machinists seeking a dependable, cost‑efficient cutting solution. The robust edge preparation and coating strategy support higher productivity while maintaining surface finish requirements. For workshops aiming to standardise tooling with predictable results, this insert offers a practical balance of performance and reliability. For application guidance or to source the Walter Tools DCMT070208-RP4 WPP30G through Metav Werkzeuge, contact our technical sales team at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, practice‑oriented advice and delivery options. Technical data Article number: DCMT070208-RP4-WPP30G-WALTER SKU: DCMT070208-RP4-WPP30G-WALTER Product: Indexable turning insert (DCMT070208-RP4 WPP30G) Manufacturer: Walter Tools Core dimensions Clearance angle: 7° Corner radius: 0.8 mm Form: Rhombus 55° Size: 07 Thickness: 02 Tolerance class: M Features Coating/grade: Tiger‑tec Gold, WPP30G Chipformer: RP4 Material suitability: steel (ISO P) Execution: T Series: Tiger‑tec Gold FAQ Which materials is this insert designed for? The insert is specified for machining steel (ISO P); the Walter Tools DCMT070208-RP4 WPP30G is optimised for the heat and chip characteristics typical of steel turning. What benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on the WPP30G grade increases wear resistance and cutting‑edge stability, enabling higher cutting speeds and longer tool life in steel applications. How does the RP4 chipformer affect machining? The RP4 chipformer promotes consistent chip control during turning, improving surface finish and reducing the likelihood of built‑up edge or machine stoppages when machining steel. Is this insert suitable for stainless steel or other materials? Suitability for stainless steel is not indicated; the grade is specified for steel (ISO P). For other materials, assessment based on specific application data is recommended. What are the key geometric values to consider for setup? Key values are a 0.8 mm corner radius and a 7° clearance angle; the Rhombus 55° form offers versatile approach angles for common turning operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names belong to their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation with Metav Werkzeuge. The offered item is an original, brand‑new product from the manufacturer.
DCMT11T302-FM4 WMP20G Wendeplatten - Walter Tools
Benefit from the combination of a proven Tiger·tec Gold grade and the FM4 chipbreaker for reliable chip control in rostfreier Stahl machining; the compact 55° rhombus form and 0.2 mm corner radius deliver consistent surface quality and process stability. Order the DCMT11T302-FM4 WMP20G turning insert via Metav Werkzeuge or consult our specialists for application support. DCMT11T302-FM4 WMP20G – Turning insert, Tiger·tec Gold for rostfreier Stahl (Walter Tools) A DCMT11T302-FM4 WMP20G turning insert engineered for precision turning of rostfreier Stahl with a 55° rhombus geometry and FM4 chipbreaker for stable machining. Tiger·tec Gold coating, WMP20G grade FM4 chipbreaker for stable chip control 55° rhombus geometry for versatile cutting 0.2 mm corner radius for fine surface finish Consistent performance for demanding rostfreier Stahl operations The Tiger·tec Gold coating in combination with the WMP20G grade is designed to manage the thermal and adhesive challenges typical of rostfreier Stahl. This indexable insert offers a balance of wear resistance and toughness that reduces edge build-up and extends tool life under medium to robust cutting conditions. The result is fewer interruptions for tool changes, improved component quality and a measurable increase in process reliability. Geometry and edge form tuned for surface quality A 55° rhombus form paired with a 0.2 mm corner radius delivers controlled cutting engagement and reproducible surface finish on turned parts. The insert’s relief angle of 7° supports stable cutting forces and predictable tool behaviour, helping to maintain dimensional consistency across repeated cycles. For shops machining parts where finish and repeatability matter, the geometry simplifies setup and reduces rework. Chip control and efficiency through FM4 chipbreaker design The FM4 chipbreaker is optimised to form short, controllable chips when turning rostfreie Werkstoffe, minimising entanglement and improving evacuation. Better chip control reduces machine downtime and the risk of surface damage, while contributing to safer, more efficient production. The insert’s compact form factor and validated grade contribute to economical productivity by prolonging edge life and lowering overall tooling costs. Practical application and handling advice The insert is supplied in the DCMT format with a T3 thickness designation and is suitable for a broad range of turning tasks in rostfreier Stahl. Its combination of coating, chipbreaker and geometry makes it a reliable choice for batch production and single-part runs where steady performance and process security are priorities. For best results, pair the insert with a compatible WC toolholder and apply cutting parameters aligned with the workpiece grade and machine rigidity. Discuss application parameters and sourcing options with Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to ensure the optimal Walter Tools insert selection for specific rostfreier Stahl tasks. Technical data Article number: DCMT11T302-FM4-WMP20G-WALTER Designation: DCMT11T302-FM4 WMP20G Type: Turning insert Facts Plate form: Rhombus 55° Relief angle: 7° Corner radius: 0.2 mm Plate size: 11 Thickness designation: T3 Special features Coating / series: Tiger·tec Gold Grade: WMP20G Chipbreaker: FM4 Application: rostfreier Stahl Manufacturer: Walter Tools FAQ What materials is this insert intended for? The DCMT11T302-FM4 WMP20G insert is specified for machining rostfreier Stahl and is optimised for the thermal and adhesion characteristics of those workpiece materials. How does the FM4 chipbreaker improve production? The FM4 chipbreaker on the insert delivers short, controllable chips which enhance evacuation and reduce the risk of entanglement, contributing to safer and more efficient machining cycles. Which series and coating does the grade belong to? The cutting grade is part of the Tiger·tec Gold series, combining a coated cemented carbide substrate with a protective and wear-resistant finish for enhanced edge stability. Is the corner radius suitable for fine finishing? Yes, the 0.2 mm corner radius supports fine surface finishes while maintaining adequate edge strength for consistent turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. The mentioned brand Walter Tools is used for descriptive purposes only; the offered item is an original, factory-new product of the manufacturer. The Walter AG (brand appearance: Walter Tools) is one of the leading suppliers of precision tools for metalworking and is part of the Sandvik Group.
DCMT11T302-FM4 WMP20S WMP20S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coating, a specialised FM4 chipbreaker and a compact 0.2 mm corner radius delivers reliable edge stability and consistent chip formation for rostfreier Stahl machining; order direct via Metav Werkzeuge or request tailored advice from our consultants for process integration. DCMT11T302-FM4 WMP20S indexable turning insert — Walter Tools, Tiger·tec Silver, for rostfreier Stahl The DCMT11T302-FM4 WMP20S is an indexable turning insert designed for medium to robust machining of rostfreier Stahl, combining a wear-resistant coating and a chipbreaker tuned for secure swarf control. Walter WMP20S grade for rostfreier Stahl machining Tiger·tec Silver coating enhances wear resistance FM4 chipbreaker for secure chip control Rhombic 55° form with 0.2 mm corner radius Consistent edge life through advanced coating technology The coated-carbide grade from the Tiger·tec Silver family provides a controlled friction profile and enhanced thermal stability, which translates into longer tool life and fewer index changes during production. The WMP20S substrate is formulated specifically for rostfreier Stahl where toughness and a tendency to build up material on the cutting edge are common challenges. By combining a robust substrate with a modern PVD/CVD-inspired top layer, this insert reduces flank wear and supports a stable cutting edge under the thermal loads typical for these alloys. The result is a measurable improvement in process repeatability and reduced sorting of finished parts. Reliable chip control for uninterrupted turning The integrated FM4 chipbreaker is shaped to guide and break swarf consistently in turning operations, lowering the risk of re-cutting and tool damage. Good chip control reduces cycle interruptions and supports unattended machining cycles, particularly when paired with the Rhombic 55° geometry that aids in controlled material shear. For production environments where throughput and machine uptime matter, the chipbreaker helps maintain consistent surface quality and prevents entanglement of chips around tooling and workpieces. Geometry tuned for finishing and medium-cutting tasks A 0.2 mm corner radius offers a balance between edge strength and surface finish capability: it supports an improved tool life compared with sharper radii while still permitting a fine external surface. The 7° clearance angle helps to reduce rubbing on the flank face, lowering heat generation and minimising the risk of built-up edge during light to medium cuts. The rhomboid form provides flexible approach angles, allowing the insert to be used in multiple toolholders and orientations while maintaining predictable cutting behaviour. Integration and process benefits for production shops As an indexable insert from Walter Tools’ Tiger·tec Silver range, this component simplifies tooling logistics: one insert grade handles a broad range of rostfreier Stahl batches, reducing tool change frequency and inventory complexity. The combination of coating and chipbreaker means shorter set-up times and fewer trial cuts when transferring programmes between machines. For manufacturing engineers, this translates into a more predictable cost per component and easier benchmarking of cycle times under varying conditions. For robust rostfreier Stahl turning with proven edge stability, contact Metav Werkzeuge for stock availability and application advice on Walter Tools inserts — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 — Metav Werkzeuge will assist with grade selection and process recommendations. Technical data Article number: DCMT11T302-FM4-WMP20S-WALTER Designation: DCMT11T302-FM4 WMP20S Manufacturer: Walter Tools Product type: indexable turning insert Facts Plate size: 11 Plate thickness: T3 Clearance angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 55° Grade family: Tiger·tec Silver Grade: WMP20S Special features Chipbreaker: FM4 Coating: Tiger·tec Silver (coated carbide) Material group: M (rostfreier Stahl) Tolerance class: M Series description: WMP20S designed for medium to robust rostfreier Stahl conditions FAQ Which materials is this insert suitable for? The DCMT11T302-FM4 WMP20S insert from Walter Tools is specified for rostfreier Stahl (material group M) and is optimised to handle the toughness and heat sensitivity associated with these alloys. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WMP20S grade enhances wear resistance and thermal stability, helping to extend edge life and maintain consistent dimensional accuracy during extended turning cycles. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker promotes predictable chip formation and breakage, improving swarf evacuation and reducing the likelihood of chip-related interruptions in continuous turning operations. Is the 0.2 mm corner radius suitable for finishing passes? Yes, the 0.2 mm corner radius gives a compromise between edge strength and surface quality, making the insert appropriate for light to medium finishing passes where a good surface and reliable tool life are required. Can this insert be used in standard DCMT toolholders? The DCMT11T302-FM4 geometry follows standard DCMT form factors and is compatible with toolholders designed for rhombic 55° DCMT inserts; ensure correct clamping and seat conditions for optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only. There is no affiliation between our company and the named manufacturers; the offered item is original, brand-new material from the manufacturer.
DCMT11T302-FM4 WMP30G Tiger-tec Gold Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide durability, precise chip control and adaptable Rhombus 55° geometry for stable, productive turning of stainless steel; order the inserts via Metav Werkzeuge or consult the technical team for machining recommendations. DCMT11T302-FM4 WMP30G turning insert — Walter Tools — Tiger·tec Gold, for stainless steel DCMT11T302-FM4 WMP30G is an indexable turning insert designed for reliable machining of stainless steel in medium to robust cutting conditions Tiger·tec Gold coated carbide grade WMP30G Optimised FM4 chipbreaker for stainless steel Rhombus 55° geometry for versatile turning 7° clearance angle and 0.2 mm nose radius Consistent chip control for stainless steel The combination of the Tiger·tec Gold coating and the WMP30G grade delivers improved surface integrity and stable chip formation when tackling stainless steel. The integrated FM4 chipbreaker is shaped to promote controlled, short chips under the high heat and toughness typical of stainless alloys, which reduces the risk of built-up edge and machine downtime. A 7° clearance angle and the modest 0.2 mm corner radius support an even load on the cutting edge, extending service intervals and improving process repeatability. Longer tool life and dependable edge behaviour Constructed as a coated carbide indexable insert with a Rhombus 55° outline, the geometry of this insert balances strength and accessibility for internal and external turning. The plate thickness (T3) and the 11 mm size provide rigidity for heavier cuts while still allowing fine finishing with the small nose radius. These attributes create a predictable wear pattern and stable cutting edge, which lowers unit cost per component through extended tool life and fewer tool changes. Practical integration for production environments The DCMT form of the insert matches standard toolholders and clamping systems, enabling quick replacement and minimised setup times in serial production. The FM4 chipbreaker design reduces chip entanglement, simplifying chip handling and contributing to a cleaner work area. For operations that require a balance of robustness and finish quality, this insert supports smooth integration into existing turning processes and helps maintain consistent part tolerances across batches. For demanding stainless steel turning applications, choose the Walter Tools DCMT11T302-FM4 WMP30G insert from Metav Werkzeuge or contact our specialists at Metav Werkzeuge for tailored machining parameters and toolholder recommendations. Technical data Article number: DCMT11T302-FM4-WMP30G-WALTER Designation: DCMT11T302-FM4 WMP30G Product type: turning insert Brand: Walter Tools Facts Clearance angle: 7° Corner radius: 0.2 mm Plate size: 11 Plate form angle: 55° Thickness: T3 Special features Coating / grade: Tiger·tec Gold / WMP30G (coated carbide) Chipbreaker: FM4 Series: Tiger-tec Gold Shape: Rhombus 55° Execution: T Tolerance class: M Material application: stainless steel FAQ What materials is this insert intended for? The DCMT11T302-FM4 WMP30G turning insert from Walter Tools is specified for stainless steel and performs reliably under the typical heat and adhesion challenges of stainless alloys. How does the FM4 chipbreaker influence machining? The FM4 chipbreaker on this Walter Tools insert shapes chips to be shorter and more controllable during stainless steel turning, reducing build-up and easing chip evacuation. Is the geometry suited for finishing passes? Yes, the small 0.2 mm corner radius and Rhombus 55° profile allow the insert to produce fine surface finishes while maintaining edge strength for intermittent heavier cuts. Can the insert be used in standard DCMT toolholders? The DCMT form factor and T3 thickness of the DCMT11T302-FM4 WMP30G are compatible with standard indexable turning toolholders that accept DCMT inserts. What advantages does the Tiger·tec Gold grade provide? Tiger·tec Gold coating offers wear resistance and heat protection that extend tool life and support consistent cutting-edge performance when machining stainless steel. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for clarification. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
DCMT11T302-FM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take full advantage of a high‑performance grade and a proven chipbreaker: the WSM01 grade in the Tiger‑tec Silver series delivers reliable edge stability and extended tool life in demanding materials, while the FM4 chipbreaker promotes secure chip control and predictable machining. Order the DCMT11T302-FM4 WSM01 turning insert directly via Metav Werkzeuge or ask the consultants for application advice. DCMT11T302-FM4 WSM01 indexable turning insert — WSM01 grade, Tiger‑tec Silver by Walter Tools A DCMT11T302-FM4 WSM01 indexable turning insert designed for tough stainless steel and heat‑resistant superalloys, offering stable cutting performance and secure chip control for demanding turning operations WSM01 grade for stainless steel and superalloys Tiger‑tec Silver series coating for durability FM4 chipbreaker for secure chip control Rhombic 55° shape with 0.2 mm nose radius Reliable performance where heat and toughness challenge the process The combination of the WSM01 coated‑carbide grade and the Tiger‑tec Silver series provides a clear advantage when machining materials that generate heat or tend to work‑harden. Designed for stainless steel (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), this insert maintains a stable cutting edge under thermal stress, which translates into fewer interruptions and more consistent component quality. The rhombic 55° geometry contributes to smooth entry and controlled force distribution, supporting higher productivity on long runs and complex parts. Predictable chip control and longer effective tool life The FM4 chipbreaker is engineered to form manageable chips in aggressive materials, reducing the risk of entanglement and improving surface finish. Combined with a 0.2 mm nose radius and a 7° clearance angle, the geometry balances strength at the cutting tip with the ability to produce an acceptable surface without excessive cutting forces. This leads to a reduction in unplanned tool changes and more predictable cycle times, which is especially valuable in serial production and when machining components with tight tolerances. Practical benefits for workshop integration and process stability With a compact 11 mm size and T3 thickness, the insert fits a wide range of standard turning toolholders while offering robust seating for repeatable accuracy. The M tolerance class ensures consistent dimensions across batches, simplifying tool inventory management and reducing setup variability. Choosing a Tiger‑tec Silver WSM01 insert supports a workflow that emphasises process reliability and cost‑efficiency: fewer scrap parts, longer edge life, and stable chip evacuation reduce overall machining cost per part. For high process security with Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge for tailored application support and supply coordination via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: DCMT11T302-FM4-WSM01-WALTER Designation: DCMT11T302-FM4 WSM01 Manufacturer: Walter Tools Product type: Indexable turning insert (drehwendeschneidplatte) Facts Insert size: 11 mm Clearance angle: 7° Nose radius: 0.2 mm Thickness: T3 Tolerance class: M Special features Grade: WSM01 Series: Tiger‑tec Silver Chipbreaker: FM4 Shape: Rhombic 55° Applicable materials: S / M Suitable for stainless steel FAQ What materials is this insert suited for? The DCMT11T302-FM4 WSM01 insert is specified for stainless steel (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), reflecting the design of the WSM01 grade. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on the DCMT11T302-FM4 promotes secure chip formation and evacuation, which helps maintain surface quality and reduces the risk of chip‑related interruptions. Can this insert be used in standard toolholders? Yes, the 11 mm rhombic 55° format and T3 thickness are compatible with a wide range of standard turning toolholders designed for DCMT inserts. What benefit does the Tiger‑tec Silver series provide? Tiger‑tec Silver coating enhances wear resistance and thermal stability, supporting longer effective tool life and more consistent cutting performance in demanding applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of Walter Tools.
DCMT11T302-FM4 WSM10S WSM10S Wendeplatten - Walter Tools
High-performance combination of the Tiger·tec Silver coating and WSM10S grade ensures reliable chip formation and extended edge stability for demanding stainless steels and superalloys; paired with a precise rhombic geometry this yields consistent surface finish and reduced downtime. Order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. DCMT11T302-FM4 WSM10S turning insert, rhombic 55° geometry, Tiger·tec Silver – Walter Tools The DCMT11T302-FM4 WSM10S is a rhombic 55° turning insert designed for stable cutting in stainless steels and heat-resistant superalloys, combining a robust grade and a chipbreaker tuned for secure swarf control. Tiger·tec Silver coating for heat resistance WSM10S grade for stainless and superalloys Rhombic 55° geometry, 0.2 mm corner radius FM4 chipbreaker for stable chip control 7° clearance, T3 plate thickness Consistent cutting performance for stainless steels and superalloys The combination of Tiger·tec Silver technology and the WSM10S graded substrate is optimised for materials classified M and S under ISO 513. This composition provides improved heat resistance and stable chip formation, which counteracts typical challenges of stainless steels such as built-up edge and poor thermal conductivity. By choosing this cutting grade, shops achieve repeatable performance and a more predictable tool life even under elevated temperatures. Geometry and chip control that reduce secondary operations The rhombic 55° DCMT geometry with a 0.2 mm corner radius and the FM4 chipbreaker deliver precise insert engagement and controlled swarf evacuation. A 7° clearance reduces rubbing at the flank face while the T3 plate thickness maintains rigidity during interrupted cuts. Together, these features reduce the need for corrective passes and support a reliable surface finish, making the insert suitable for both finishing and light semi-finishing operations where dimensional stability is required. Process economy, repeatability and shop-floor benefits Using a coated, application-focused grade reduces tool changes and unplanned stoppages, contributing to longer tool life and a consistent surface finish across batches. The insert is compatible with standard indexable turning systems and benefits from the design focus of Walter Tools on stable cutting edges. The result is improved machine uptime and predictable cycle times, supporting higher throughput and efficient material utilisation in serial production. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts and to secure the DCMT11T302-FM4 WSM10S Tiger·tec Silver insert for demanding stainless-steel or superalloy turning tasks Technical data Article number: DCMT11T302-FM4-WSM10S-WALTER ISO designation: DCMT11T302-FM4 WSM10S Series: Tiger·tec Silver Grade: WSM10S Shape: Rhombus 55° Chipbreaker: FM4 Plate thickness: T3 Manufacturer: Walter Tools Core technical data Plate size: 11 mm Corner radius: 0.2 mm Clearance angle: 7° Tolerance class: M Materials & special features Suitable for: stainless steel (M) and heat-resistant superalloys/titanium (S) Material designation: S / M Application focus: machining of stainless steels and difficult-to-machine alloys Geometry: rhombic 55° double-sided insert FAQ Which materials is this insert best suited for? The DCMT11T302-FM4 WSM10S insert is optimised for stainless steel (M) and for heat-resistant superalloys and titanium (S), reflecting the intended use of the WSM10S grade within the Tiger·tec Silver family. What advantage does the WSM10S grade offer? WSM10S, as employed on this Walter Tools insert, provides enhanced thermal stability and reliable edge behaviour, which improves chip control and reduces the risk of built-up edge in difficult-to-machine materials. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker is configured to produce short, controllable chips and to support continuous swarf evacuation; this promotes safer machining and reduced interruptions for swarf handling when using this insert. Is the rhombic 55° geometry suitable for finishing? Yes, the rhombic 55° form with a 0.2 mm corner radius and T3 thickness offers sufficient rigidity and close cutting engagement for finishing operations that demand consistent surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
DCMT11T302-FM4 WSM20S FM4 Wendeplatten - Walter Tools
High-performance Tiger·tec Silver grade and the FM4 chipbreaker combine to deliver stable chip formation and consistent surface finish when machining rostfreier Stahl and heat‑resistant alloys; the rhombic 55° geometry with a 7° relief ensures reliable edge engagement and reduced cutting forces. Order directly via Metav Werkzeuge or consult our specialists for application support and availability. DCMT11T302-FM4 WSM20S Rhombic 55° turning insert, Tiger·tec Silver – Walter Tools The DCMT11T302-FM4 WSM20S is a rhombic 55° turning insert engineered for secure, high‑productivity machining of rostfreier Stahl and difficult‑to‑cut superalloys. Tiger·tec Silver coating for edge stability Suitable for rostfreier Stahl and superalloys Rhombic 55° geometry with 7° relief FM4 chipbreaker for controlled chip formation Improved process reliability through proven grade and geometry The Tiger·tec Silver WSM20S grade provides a balanced combination of wear resistance and toughness, which supports stable chip formation and extends edge life during demanding operations. With the FM4 chipbreaker, chips are segmented and evacuated consistently, reducing the risk of built‑up edge and interruptions. The rhombic 55° form and 7° relief reduce radial cutting forces and help maintain dimensional stability, making this insert a dependable choice for production environments that require repeatable results. Efficiency gains and easier process control on difficult materials Thanks to its tailored grade and geometry, this turning insert reduces tool changes and improves cycle times when tackling materials that generate heat and adhesive wear. The modest corner radius of 0.2 promotes a reliable cutting edge for finishing and mixed‑turning tasks, offering a balance between edge strength and surface quality. For workshops seeking fewer reworks and consistent part tolerances, the combination of coating technology and chip control translates into measurable efficiency improvements and lower overall machining costs. Durability and application scope for specialised machining Designed for material groups M and S (rostfreier Stahl and heat‑resistant superalloys / titanium), the insert performs where conventional grades struggle, providing thermal stability and edge robustness. The insert’s construction and Walter Tools’ manufacturing standards contribute to predictable tool life and stable cutting performance, supporting elevated productivity and quality in serial production. Where process security and repeatable surface finish are priorities, this solution stands out as a technically sound investment. Contact Metav Werkzeuge for tailored application advice and delivery options for Walter Tools turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DCMT11T302-FM4-WSM20S-WALTER Designation: DCMT11T302-FM4 ISO designation: DCMT11T302-FM4 WSM20S Series: Tiger·tec Silver Grade / sort: WSM20S Chipbreaker: FM4 Relief angle: 7° Corner radius: 0.2 Plate form: Rhombus 55° Plate size: 11 Plate thickness: T3 Execution / style: T Tolerance class: M Material application: S / M Manufacturer: Walter Tools Facts SKU: DCMT11T302-FM4-WSM20S-WALTER Label: Drehwendeschneidplatte DCMT11T302-FM4 WSM20S Walter Tools Special features Coating technology: Tiger·tec Silver Intended for rostfreier Stahl and heat‑resistant alloys Balanced wear resistance and toughness Suitable for finishing and mixed turning applications FAQ What materials are best machined with this insert? The DCMT11T302-FM4 WSM20S insert is optimised for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and secure chip control for these demanding materials. How does the FM4 chipbreaker influence machining? The FM4 chipbreaker on the WSM20S grade promotes segmented chips and reliable evacuation, which improves process stability and reduces the chance of built‑up edge during continuous turning. What is the benefit of the rhombic 55° geometry with 7° relief? The rhombic 55° shape combined with a 7° relief reduces radial cutting forces and enhances edge engagement, resulting in predictable tool behaviour and improved surface quality for turned parts. Is the insert suitable for finishing operations? Yes, the small corner radius of 0.2 and the balanced toughness of the Tiger·tec Silver grade support fine surface finishes while maintaining sufficient edge strength for typical finishing tasks. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision metal‑cutting tools and is part of the Sandvik group. Marked brand names and trademarks are the property of their respective owners and are used here for explanation only. There is no affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
DCMT11T302-FM4 WSM30S WSM30S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating, the WSM30S grade and a compact 0.2 mm corner radius for stable edge life when machining stainless steel and heat‑resistant alloys; order the DCMT11T302‑FM4 WSM30S directly via Metav Werkzeuge or consult the specialists for geometry and application advice. DCMT11T302-FM4 WSM30S indexable turning insert, Tiger‑tec Silver, for stainless steel and superalloys — Walter Tools A DCMT11T302-FM4 WSM30S indexable turning insert engineered for secure chip control and extended tool life in stainless steel and high‑temperature alloys. Tiger‑tec Silver coating for high process reliability WSM30S grade optimised for stainless steel Rhombus 55° insert form for versatile turning FM4 chipbreaker for controlled chip formation 0.2 mm corner radius with 7° clearance Longer, more consistent edge life for difficult materials The combination of the Tiger‑tec Silver coating and the WSM30S grade provides enhanced thermal resistance and improved wear characteristics when machining stainless steel and superalloys. These materials tend to generate heat and sticky chips; the coated carbide substrate reduces chemical affinity and supports a stable cutting edge, which in turn lowers the frequency of insert changes. The result is a measurable increase in process reliability and fewer interruptions during component production. Geometry that improves chip control and surface quality The Rhombus 55° form together with the FM4 chipbreaker and 0.2 mm corner radius is designed to balance accessibility and robustness. The 55° shape gives favourable approach angles for both external and light profiling operations, while the FM4 geometry channels chips away from the cutting zone to reduce re‑cutting. A 7° clearance angle helps prevent rubbing on interrupted surfaces, contributing to improved surface finish and predictable tool behaviour over longer cycles. Application range and clamping considerations This insert is suitable for the ISO material groups S and M, which means it is intended for heat‑resistant superalloys and stainless steel respectively. The T3 thickness and size designation (11) provide a compact, rigid contact area preferred in medium‑to‑light roughing and finishing applications where controlled chip formation is required. Proper seat cleanliness and correct clamping torque remain essential to achieve the promised repeatability and edge life in serial production. Productivity gains through stable cutting performance Adopting this insert supports productive turning processes by reducing unexpected tool changes and smoothing the path to consistent part quality. The coated geometry and chip control contribute to lower scrap rates and better predictability in cycle times. For operations focused on repeatability and uptime, the combination of grade, coating and geometry delivers an efficient compromise between longevity and surface integrity. Contact Metav Werkzeuge for tailored recommendations on cutting data and holder compatibility for Walter Tools inserts or request a suitability check for specific stainless steel alloys. Technical Data Article number: DCMT11T302-FM4-WSM30S-WALTER Article name: DCMT11T302-FM4 WSM30S Product type: Indexable turning insert Facts Insert form: Rhombus 55° Clearance angle: 7° Corner radius: 0.2 mm Insert size: 11 Thickness: T3 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WSM30S (coated carbide) Chipbreaker: FM4 Material suitability: S, M Application focus: stainless steel and heat‑resistant superalloys FAQ What materials is this insert suited for? The DCMT11T302‑FM4 WSM30S is designed for ISO groups S and M, meaning it is suited for heat‑resistant superalloys and stainless steel. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker promotes predictable chip segmentation and evacuation; this reduces re‑cutting and supports a more consistent surface finish when machining sticky or gummy materials. Is the 0.2 mm corner radius suitable for finishing passes? A 0.2 mm corner radius offers a balance between edge strength and finish capability, making it appropriate for light finishing and semi‑finishing operations with stable clamping. Can this insert be used for interrupted cuts? Yes; the 7° clearance together with the robust grade and coating improves resistance to edge chipping under interrupted cutting conditions, provided the correct seat and clamping are used. Which series and brand manufacture this insert? The insert belongs to the Tiger‑tec Silver series and is supplied by Walter Tools under the designation DCMT11T302‑FM4 WSM30S. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com