DCMT11T302-FP4 WEP10C - Walter Tools
Benefit from the combination of a wear-resistant WEP10C cermet grade and a rhombic 55° geometry with a 0.2 mm corner radius for accurate finishing and consistent surface quality; this insert delivers stable engagement thanks to its 7° clearance and an FP4 chipbreaker. Order directly via Metav Werkzeuge or ask the consultants for a tailored recommendation. DCMT11T302-FP4 WEP10C turning indexable insert, rhombic 55°, 0.2 mm radius — Walter Tools A DCMT11T302-FP4 WEP10C indexable insert designed for precision turning tasks where surface finish and repeatability are priorities, suitable for use in the Walter Cermet series and compatible with standard turning toolholders Cermet grade WEP10C for long tool life Rhombus 55° geometry for versatile turning 0.2 mm corner radius for precise profiles 7° clearance angle for stable cut engagement Consistent surface finish through cermet advantages The core benefit of a cermet grade like WEP10C is its high hardness combined with good wear resistance, which supports long tool life and improved surface integrity in finishing and semi-finishing operations. Where carbide inserts can struggle at low cutting depths, cermet grades excel by producing a finer surface with reduced built-up edge. The Walter Cermet series is engineered for predictable performance; the tolerance class M helps ensure consistent geometry across batches, reducing the need for frequent re-adjustment of tool offsets. Accurate profile control from tailored geometry The rhombic 55° form together with a 0.2 mm corner radius provides a balance between accessibility to form features and strength at the cutting edge, making this insert suitable for small-radius profiling and detail turning. The FP4 chipbreaker is optimised for controlled chip formation and evacuation in finishing passes, which reduces the risk of re-cutting and improves process stability. The 7° clearance angle lowers friction behind the cutting edge and supports steady engagement, translating into more reliable dimensional results and fewer rejects. Robust design for shop-floor efficiency With a T3 thickness and the DCMT mounting style, the insert offers mechanical stability in conventional clamping systems and is suitable for many standard toolholders. The execution marked as T and the FP4 chip control make the insert a pragmatic choice for workshops seeking reproducible outcomes without complex process tuning. For application planning, consult the manufacturer’s product matrix to verify material suitability and cutting data; this ensures the selected grade and chipbreaker match the workpiece material and machining strategy. Contact Metav Werkzeuge today for application advice and cutter compatibility checks — Metav Werkzeuge can assist with selection, delivery and matching to specific machining tasks. Technical data Article number / SKU: DCMT11T302-FP4-WEP10C-WALTER Designation: DCMT11T302-FP4 WEP10C Manufacturer: Walter Tools Series: Walter Cermet Grade: WEP10C Chipbreaker: FP4 Facts Insert size: 11 Corner radius: 0.2 mm Clearance angle: 7° Thickness: T3 Tolerance class: M Special features Rhombus 55° insert shape Cermet cutting material Catalogue-dependent substrate/material Execution: T Walter Cermet series — check product matrix for material suitability FAQ What materials is this insert suitable for? The DCMT11T302-FP4 WEP10C is a cermet-grade insert; suitability depends on the specific workpiece and cutting conditions, so the product matrix should be consulted to confirm compatibility. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker on this Walter Tools insert promotes controlled chip formation during finishing passes, improving chip evacuation and surface consistency. What does tolerance class M mean for tool set-up? Tolerance class M indicates consistent dimensional accuracy across production batches, which supports predictable tool offsets and reduces setup corrections. Can the 0.2 mm corner radius be used for profiling? Yes, the 0.2 mm corner radius provides fine profile control for small radii and detail turning while maintaining adequate edge strength for finishing work. Is this insert compatible with standard DCMT toolholders? The DCMT mounting style and T3 thickness are intended for common turning toolholders; check holder compatibility and clamping specifications before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT11T302-FP4 WKP01G WKP01G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating, a 0.2 mm nose radius and the FP4 chipbreaker ensures consistent edge life and reliable chip control for steel and cast iron turning; order the DCMT11T302-FP4 WKP01G indexable turning insert via Metav Werkzeuge or consult the technical team for application guidance. DCMT11T302-FP4 WKP01G indexable turning insert — Tiger‑tec Gold for steel & cast iron | Walter Tools The DCMT11T302-FP4 WKP01G is an indexable turning insert engineered for medium-duty finishing and semi-finishing of steel and cast iron, combining a Tiger‑tec Gold coated grade with a 0.2 mm nose radius. Tiger‑tec Gold coated grade WKP01G FP4 chipbreaker for controlled chips 0.2 mm nose radius for fine finishes Rhombus 55° shape for versatile turning Consistent performance through advanced coating technology The Tiger‑tec Gold coating and the WKP01G grade deliver a durable, coated carbide that resists abrasive and adhesive wear during serial production. This coating optimises thermal stability and edge retention, which reduces frequency of index changes and supports longer tool life under typical steel (P) and cast iron (K) conditions according to ISO 513. For production environments seeking predictable cycle times and fewer interruptions, the coated grade represents a practical balance between performance and cost-efficiency. Geometry that supports precision and surface quality The Rhombus 55° form with a 0.2 mm nose radius and 7° clearance offers a geometry tuned for close-tolerance turning and fine surface finishes. The small nose radius helps achieve precise contours and reduced cutting forces in finishing passes, while the 55° shape provides good access for a wide range of internal and external turning tasks. The tolerance class M and T3 thickness ensure repeatable seating in standard toolholders, promoting consistent results across tool changes. Reliable chip control and stable cutting behaviour The FP4 chipbreaker is designed to produce short, controlled chips in both steel and cast iron applications. Reduced chip length and predictable breakage minimise interruptions and contribute to safer machine operation. Stable chip formation also helps maintain the integrity of the cutting edge and lowers the risk of built-up edge, which together increase process security and can improve overall productivity on batch and continuous turning operations. Practical application advice and process fit This insert suits users requiring dependable finishing performance on steels and grey or nodular cast irons where coated carbide grades are preferred. The designation indicates compatibility with ISO material groups P and K; selection should be aligned with workpiece grade, cutting parameters and holder geometry. For tailored recommendations regarding speeds, feeds and tooling arrangements, Metav Werkzeuge’s technical consultants provide application support and detailed data to integrate the insert effectively into existing machining processes. For machining projects that demand stable edge life and reliable chip control, request specification support or order the DCMT11T302-FP4 WKP01G indexable turning insert from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data Article number: DCMT11T302-FP4-WKP01G-WALTER Designation: DCMT11T302-FP4 WKP01G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP01G Key figures Size: 11 Clearance angle: 7° Nose radius: 0.2 mm Thickness: T3 Tolerance class: M Features / Applications Coating: Tiger‑tec Gold Chipbreaker: FP4 Shape: Rhombus 55° Material suitability: Steel (P), Cast iron (K) Execution: T FAQ What materials is this insert suited for? The DCMT11T302-FP4 WKP01G indexable turning insert from Walter Tools is specifically designed for machining steel (P) and cast iron (K) as indicated by the WKP01G grade and Tiger‑tec Gold coating. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker on the insert promotes short, controlled chips for safer and more efficient turning, reducing interruptions and improving process stability when machining steels and cast irons. Can this insert achieve fine surface finishes? Yes; the 0.2 mm nose radius and Rhombus 55° geometry enable precise finishing passes and good surface quality when used with appropriate feeds and speeds. Is the DCMT11T302-FP4 WKP01G suitable for automated production? The coated grade and geometry are optimised for reproducible performance and longer edge life, making the insert appropriate for automated or high-volume turning where consistent tool life is critical. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT11T302-FP4 WPP10G FP4 Wendeplatten - Walter Tools
Take advantage of a proven combination of Tiger·tec Gold coating and the wear-resistant WPP10G grade for stable chip formation and reliable tool life; the insert’s FP4 chipbreaker and rhombic geometry ensure consistent turning of steels and efficient production. Order directly via Metav Werkzeuge or consult our specialists for application guidance. DCMT11T302-FP4 WPP10G – Indexable turning insert, Rhombic 55°, 7° clearance (Walter Tools) The DCMT11T302-FP4 WPP10G is a rhombic 55° indexable turning insert optimised for steel machining, offering a Tiger·tec Gold coated grade for productive general turning operations. Tiger·tec Gold coated grade WPP10G Designed for steel machining (ISO P) FP4 chipbreaker for stable chips Rhombic 55° insert with 0.2 mm corner radius Maximum productivity through a high-performance grade The combination of a Tiger·tec Gold coating and the WPP10G carbide grade delivers a high degree of process reliability for turning operations on steels (ISO P). The coating reduces flank wear and enhances resistance to the thermal stresses typical of turning steel, resulting in longer tool life and fewer insert changes. For production environments this means reduced downtime and a more predictable machining cycle, ultimately improving throughput and factory efficiency. Precise geometry for consistent dimensional results The rhombic 55° geometry and 0.2 mm corner radius provide a balance between edge strength and form accuracy, supporting stable cutting forces and repeatable part quality. The 7° clearance minimises rubbing and helps maintain surface finish, while the insert shape suits a wide range of turning profiles. Operators benefit from reliable dimensional control when machining unalloyed and alloyed steels, reducing rework and contributing to more efficient downstream processes. Optimised chip control and thermal performance Equipped with the FP4 chipbreaker, this insert promotes controlled chip formation across typical steel applications, preventing long swarf and aiding chip evacuation. Controlled chips reduce tool exposure to incidental re-cutting and limit heat concentration at the cutting edge, which supports a stable cutting edge and consistent surface integrity. The insert’s design therefore contributes directly to safer machining and easier handling in production runs. Practical handling and application range The insert’s coated carbide construction and classification for steel machining make it suitable for a broad spectrum of turning tasks, from medium to demanding cuts. As part of the Tiger·tec Gold series, the grade WPP10G is positioned as a wear-resistant, universal choice that balances toughness and resistance to abrasion. This makes it particularly appropriate where predictable performance and straightforward tool selection are priorities in a busy workshop. Contact Metav Werkzeuge today to discuss the best grade and geometry for the application and to secure immediate availability through Metav Werkzeuge. Technical data Article number: DCMT11T302-FP4-WPP10G-WALTER Designation: DCMT11T302-FP4 Insert designation: DCMT11T302-FP4 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Chipbreaker: FP4 Numbers / Core technical data Insert size: 11 Clearance angle: 7° Corner radius: 0.2 mm Thickness: T3 Insert form angle: Rhombic 55° Tolerance class: M Materials / Applications Coating: Tiger·tec Gold Substrate: Coated carbide Applicable material group: Steel (ISO P) Typical use: General turning of unalloyed and alloyed steels Application focus: Stable chip formation and productive machining FAQ What materials is this insert suitable for? The DCMT11T302-FP4 WPP10G is specified for steel machining (ISO P), covering unalloyed and alloyed steels with a balance of abrasion resistance and toughness. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker on the DCMT11T302-FP4 WPP10G promotes stable, controlled chips, aiding evacuation and reducing the risk of long swarf in turning operations. Which series and grade does this insert belong to? This insert is part of the Tiger·tec Gold series and uses the WPP10G grade, a coated-carbide solution optimised for wear resistance in steel machining. What edge geometry ensures consistent surface finish? The rhombic 55° form with a 0.2 mm corner radius and 7° clearance on the DCMT11T302-FP4 WPP10G supports balanced cutting forces and a stable edge, helping to achieve consistent surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT11T302-FP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a proven combination of Tiger·tec Gold coating and the WPP20G grade for economical, productive steel turning; the optimised FP4 chipbreaker and predictable 7° clearance support consistent cycle times and part quality — order the DCMT11T302-FP4 WPP20G inserts via Metav Werkzeuge or consult our technical team for application advice. DCMT11T302-FP4 WPP20G turning insert — Tiger·tec Gold coated carbide, FP4 chipbreaker, 7° clearance (Walter Tools) DCMT11T302-FP4 WPP20G is a versatile turning insert for precision steel machining, designed for stable chip control and long tool life in serial production environments Tiger·tec Gold coated carbide grade WPP20G Optimised FP4 chipbreaker for steel Rhombic 55° insert with 0.2 mm corner radius 7° clearance angle for predictable cutting High productivity through controlled chip formation The combination of the FP4 chipbreaker and the Tiger·tec Gold coating results in consistently broken chips when machining steels (ISO group P). This reduces interruptions from long, tangled chips and minimises secondary operations linked to chip handling. The insert geometry promotes stable cutting forces, which supports higher feed rates and lower scrap rates — a direct advantage for batch production and automated turning centres. Durable coating and grade for extended tool life The WPP20G grade is a coated carbide developed to balance wear resistance and toughness for steel turning. The Tiger·tec Gold technology enhances heat resistance and adhesion of the coating, which improves edge stability under typical steel cutting temperatures. As a result, the tooling shows dependable wear behaviour and longer service intervals, lowering tooling costs per part and enabling more predictable maintenance planning. Geometry engineered for versatile turning tasks A Rhombus 55° form with a 0.2 mm corner radius offers a compromise between edge strength and profile accuracy, suitable for general turning and light profiling. The modest corner radius helps maintain dimensional control on finishes while providing enough edge support for intermittent cuts. The 7° clearance reduces rubbing and heat at the flank, aiding surface finish and tool life in through-feed and shoulder-turning operations. Process clarity for planners and operators Key specifications — including the designation DCMT11T302-FP4 WPP20G, tolerance class M, and insert thickness T3 — are clearly defined to simplify tool selection and inventory control. Because the grade is specified for steel (P) according to ISO groupings, process engineers can match cutting data from existing steel turning applications with confidence. This transparency supports faster setup times and reduces the need for trial-and-error at the machine. Contact Metav Werkzeuge for sample availability, cutting-data recommendations or to secure a delivery of Walter Tools DCMT11T302-FP4 WPP20G inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate application support and ordering assistance Technical data Article number: DCMT11T302-FP4-WPP20G-WALTER Designation: DCMT11T302-FP4 WPP20G Brand: Walter Tools Core specifications Insert size: 11 Corner radius: 0.2 mm Clearance angle: 7° Shape: Rhombus 55° Thickness: T3 Tolerance class: M Materials & features Coating: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: FP4 Series: Tiger-tec Gold Applicable material group: Steel (P) Intended use: Turning insert (indexable) FAQ What materials is this insert intended for? The DCMT11T302-FP4 WPP20G insert is specified for the ISO material group P, making it suitable for unalloyed and alloyed steels during turning operations. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker is designed to produce short, manageable chips when machining steel, improving process reliability and reducing manual chip clearing. Can this grade be used for heavy interrupted cuts? WPP20G offers a balance of wear resistance and toughness; for heavy interruptions, the grade provides improved edge stability compared with purely wear-focused grades, but cutting parameters should be adapted to the specific application. Which insert geometry supports finish accuracy? The Rhombus 55° form with a 0.2 mm corner radius gives a compromise between edge strength and surface quality, suitable for general turning and finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT11T302-FW4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of cost-effective grade selection, reliable chip control and proven Tiger·tec Gold coating to maintain steady production and minimise downtime; order the inserts directly via Metav Werkzeuge or consult the team for application advice. DCMT11T302-FW4 WPP20G – Indexable turning insert for Steel by Walter Tools The DCMT11T302-FW4 WPP20G is a precision indexable turning insert designed for efficient steel machining, combining Tiger·tec Gold coating with an FW4 chipbreaker for consistent chip formation *Tiger·tec Gold coating for longer tool life *Optimised FW4 chipbreaker for reliable chips *Rhombus 55° insert geometry *7° clearance and 0.2 mm corner radius Consistent performance for steel applications The combination of the WPP20G grade and Tiger·tec Gold coating delivers high process stability when machining steels (ISO P). The coated carbide formulation is tuned to handle the heat and chip formation typical of steel turning, which means fewer unexpected tool changes and more predictable cycle times. This grade balances wear resistance and toughness, allowing for productive machining of a broad range of unalloyed and alloyed steels while maintaining surface quality. By specifying this solution, production planners benefit from a reproducible cutting behaviour and the potential to extend tool life compared with uncoated grades. Predictable chip control and surface finish The insert’s FW4 chipbreaker and Rhombus 55° geometry work together to ensure stable chip control and consistent cutting forces. A 7° clearance angle reduces rubbing on the flank while the 0.2 mm corner radius contributes to improved edge strength without compromising finish. These geometric choices make the insert suitable for medium to general turning operations where controlled chips and good surface integrity are required. For operators less familiar with cutting terminology: the chipbreaker shapes the chip as it forms, preventing long swarf and reducing the risk of tool and workpiece damage, which directly improves uptime and shop-floor safety. Practical benefits for workshop efficiency Designed for standard tool holders and common turning set-ups, this indexable turning insert simplifies tooling logistics and supports quick seat-and-run changeovers. The DCMT11T302-FW4 WPP20G offers predictable regrinding intervals and uniform wear characteristics, which help planners calculate replacement cycles and reduce inventory uncertainty. The insert’s balance of economy and performance supports cost-efficient production without sacrificing repeatability. Choosing a well-documented grade and a widely supported geometry also eases integration into existing machining programmes and helps maintain consistent results across shifts. Contact Metav Werkzeuge for tailored recommendations on Walter Tools inserts and practical application guidance – eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: DCMT11T302-FW4-WPP20G-WALTER Designation: DCMT11T302-FW4 WPP20G Manufacturer: Walter Tools Facts Insert size: 11 mm Thickness: T3 Clearance angle: 7° Corner radius: 0.2 mm Geometry: Rhombus 55° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: FW4 Material group: Steel (ISO P) Application: general steel turning and medium-duty operations FAQ Is this insert suitable for alloyed steel? The DCMT11T302-FW4 WPP20G from Walter Tools is specified for the ISO P group and is suitable for both unalloyed and alloyed steels, offering balanced wear resistance and toughness. What does the FW4 chipbreaker deliver in practice? The FW4 chipbreaker provides controlled chip formation for reliable swarf evacuation; in combination with the Tiger·tec Gold grade it improves process stability for steel turning tasks. Can the insert be used for finishing operations? With a 0.2 mm corner radius and Rhombus 55° geometry, the insert supports good surface quality in medium finishing to semi-finishing applications when cutting parameters are correctly chosen. Which tool holders accept this insert shape? The Rhombus 55° form is compatible with the common DCMT-style turning tool holders designed for 55° inserts; confirm holder specification against the DCMT11T302-FW4 designation. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating enhances edge stability and wear resistance under the thermal and mechanical conditions typical of steel machining, usually resulting in longer usable life compared with uncoated alternatives. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer. The Walter brand is used where applicable.
DCMT11T302-FW4 WSM10S WSM10S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WSM10S grade delivers reliable edge life and stable chip formation for demanding turning applications; the rhombic 55° form with a 0.2 mm corner radius and FW4 chipbreaker ensures consistent surface quality and secure chip control. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DCMT11T302-FW4 WSM10S Drehwendeschneidplatte (Tiger·tec Silver) by Walter Tools — 7° relief, Rhombic 55° The DCMT11T302-FW4 WSM10S is an indexable turning insert designed for heavy-duty machining of rostfreier Stahl and heat‑resistant alloys, combining a Tiger·tec Silver coating with a secure FW4 chipbreaker for stable cutting performance. Tiger·tec Silver coating for stable edge life Optimised FW4 chipbreaker for reliable chip control Rhombic 55° form with 7° relief angle Suitable for rostfreier Stahl and superalloys Increased productivity through coating and grade The combination of the Tiger·tec Silver coating and the WSM10S grade provides enhanced wear resistance and thermal stability during prolonged cuts. Coated carbide technology reduces flank wear and supports a stable cutting edge when machining tough materials such as rostfreier Stahl and heat‑resistant superalloys. This results in fewer insert changes and longer effective tool life, which translates into measurable improvements in machining uptime and cost efficiency per component. Secure chip control for consistent surface quality The dedicated FW4 chipbreaker is engineered to manage chips reliably under variable cutting conditions, helping to prevent built‑up edge and uncontrolled chip forms that degrade surface finish. Combined with the 0.2 mm corner radius, the insert delivers precise edge engagement for repeatable part geometry and improved surface integrity. For applications where consistent finish and tight tolerances are essential, the geometry minimises vibration and supports steady material removal. Versatile form and geometry for varied turning tasks With its rhombic 55° shape and 7° relief, the insert offers flexible approach angles for a broad range of turning operations, from roughing to finishing, while maintaining favourable cutting forces. The T3 thickness and tolerance class M ensure stable clamping and consistent seating in compatible toolholders. This geometry enables efficient chip flow and reliable engagement in radial and axial cuts, making the insert suitable for both interrupted cuts and continuous turning sequences. Material focus and process reliability This insert is specifically suited to machining rostfreier Stahl and materials classified in ISO groups M and S, including superalloys and titanium, where heat generation and adhesion tendencies challenge conventional grades. The WSM10S grade supports secure chip formation and edge stability under elevated temperatures, contributing to process stability and predictable tool performance. Selecting this grade helps reduce rework and supports reproducible results across batch production. Contact Metav Werkzeuge for application guidance on Walter Tools Tiger·tec Silver inserts and to discuss the best insert configuration for specific rostfreier Stahl or superalloy tasks Technical Data Article number: DCMT11T302-FW4-WSM10S-WALTER Designation: DCMT11T302-FW4 WSM10S Product type: Drehwendeschneidplatte (indexable turning insert) Brand: Walter Tools Facts Relief angle: 7° Corner radius: 0.2 mm Insert size: 11 mm Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM10S (coated carbide) Chipbreaker: FW4 Shape: Rhombic 55° Series: Tiger·tec Silver Material suitability: rostfreier Stahl; heat‑resistant superalloys and titanium FAQ What materials is this insert best suited for? The DCMT11T302-FW4 WSM10S insert from Walter Tools is optimised for rostfreier Stahl and materials in ISO groups M and S, including heat‑resistant superalloys and titanium. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker on the Walter Tools insert promotes controlled chip formation and evacuation, improving surface quality and reducing the risk of built‑up edge during machining of demanding materials. Can this insert be used for finishing operations? Yes, the rhombic 55° geometry combined with the 0.2 mm corner radius enables precise edge engagement suitable for finishing passes while maintaining stable cutting behaviour. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer.
DCMT11T302-FW4 WSM20S FW4 Wendeplatten - Walter Tools
Take advantage of the combination of process security, durable cutting performance and precise chip control for reliable turning of demanding alloys; the insert’s Tiger·tec Silver coating and FW4 chipbreaker ensure consistent results and extended tool life. Order directly via Metav Werkzeuge or consult the team for application-specific advice. DCMT11T302-FW4 WSM20S indexable turning insert — Tiger·tec Silver, FW4 chipbreaker (Walter Tools) The DCMT11T302-FW4 WSM20S is an indexable turning insert designed for robust finishing and semi-finishing of rostfreier Stahl and heat-resistant alloys in demanding turning operations. Tiger·tec Silver coating for edge security Optimised for rostfreie Stähle and superalloys FW4 chipbreaker for controlled chip formation Rhombus 55° form with 0.2 mm corner radius Consistent edge life and higher process reliability The combination of the WSM20S grade within the Tiger·tec Silver family provides a coated cemented-carbide solution engineered for heat resistance and stable cutting edges. This results in improved wear resistance and fewer unplanned tool changes, which supports steady production cycles. The coating technology reduces adhesive wear and thermal damage on the cutting edge, translating into predictable tool life and lower turnaround times for batch production. Technical terms such as coating thickness and substrate hardness refer to the material engineering that underpins this stability and are optimised for tough-to-cut groups. Controlled chip formation for dependable machining The FW4 chipbreaker geometry is designed to generate short, manageable chips even when tackling sticky or work-hardening materials. Controlled chip formation reduces the risk of built-up edge and improves coolant access at the cutting zone, which in turn helps maintain surface integrity and repeatable tolerances. The Rhombus 55° insert shape provides a versatile approach angle that balances cutting force and surface finish, while the 0.2 mm corner radius strengthens the edge against shock loads—advantages that improve component quality and reduce rework. Broad suitability across demanding materials This grade targets the material groups S and M: particularly heat-resistant superalloys, titanium and rostfreier Stahl. The insert’s design supports stable chip evacuation and heat management where conventional grades would blunt rapidly. For shops that machine mixed batches of high-temperature alloys and rostfreie Stähle, the insert offers a pragmatic compromise between edge robustness and surface quality. Where process windows are narrow, selecting a coated carbide grade such as this helps maintain throughput without sacrificing repeatability. Efficient integration into production and measurable savings With an insert thickness of T3, a 7° relief and compact 11 mm size, the item is compatible with many standard turning toolholders and toolpost setups, enabling quick replacement and minimal set-up time. The indexable format reduces overall tooling cost by allowing multiple edges per insert, while the optimised chipformer minimizes downtime for chip clearing. For technical assistance or to confirm compatibility with a specific holder or programme, Metav Werkzeuge can provide machining recommendations and cutting data to support integration into existing processes. Contact Metav Werkzeuge for tailored cutting recommendations and reliable supply of Walter Tools inserts — call +49 2822 7131930 or eMail info@metav-werkzeuge.com for application advice and delivery options Technical data Article number: DCMT11T302-FW4-WSM20S-WALTER SKU: DCMT11T302-FW4-WSM20S-WALTER Product type: indexable turning insert Designation: DCMT11T302-FW4 WSM20S Brand: Walter Tools Core data Geometry: Rhombus 55° Size: 11 mm Thickness: T3 Corner radius: 0.2 mm Relief angle: 7° Tolerance class: M Chipbreaker: FW4 Grade: WSM20S Series: Tiger·tec Silver Material group: S / M Suitable for rostfreier Stahl: yes Special features Coating technology: Tiger·tec Silver (coated carbide) Designed for heavy-duty and heat-resistant materials Stable cutting edge and controlled chip formation Compact, indexable format for rapid edge replacement FAQ What materials is this insert intended for? The DCMT11T302-FW4 WSM20S insert is specified for rostfreier Stahl and heat-resistant superalloys (material groups M and S) where high temperatures and sticky chips demand a heat-resistant coated grade. What does WSM20S signify? WSM20S denotes Walter Tools’ coated carbide grade within the Tiger·tec Silver family; it is engineered for edge stability and wear resistance when machining challenging alloys. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker produces short, controllable chips and aids coolant penetration, which improves surface finish and reduces the likelihood of built-up edge during machining with Walter Tools inserts. Which geometrical values determine mounting and suitability? Key values include the Rhombus 55° form, 11 mm size, 0.2 mm corner radius and 7° relief; these define toolholder compatibility and cutting behaviour for the insert. Is this insert suitable for interrupted cuts or heavy roughing? The coated grade and reinforced corner radius offer good resistance to edge damage; however, selection should be matched to specific cutting parameters—Metav Werkzeuge can provide tailored advice. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanation only and do not imply any affiliation between our company and the mentioned manufacturers.
DCMT11T302-MM4 WMP20G MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a dedicated MM4 chipbreaker and a fine 0.2 mm corner radius for secure machining of stainless steels; order directly via Metav Werkzeuge or consult the technical team for selection and application advice. DCMT11T302-MM4 WMP20G — Indexable turning insert, Tiger·tec Gold, for stainless steels (Walter Tools) The DCMT11T302-MM4 WMP20G is an indexable turning insert engineered for medium to robust machining of stainless steels, optimising chip control and tool life in demanding turning operations. Tiger·tec Gold coating for improved tool life Optimised MM4 chipbreaker for stable chip control 7° clearance angle for secure cutting action 0.2 mm corner radius for precise finishing Consistent cutting performance for stainless steels The coated carbide grade delivers a reliable balance between wear resistance and toughness. Thanks to the Tiger·tec Gold technology and the WMP20G substrate, the insert maintains a stable cutting edge under the thermal and adhesive tendencies typical of stainless steels, reducing the risk of built-up edge. The combination of a dedicated MM4 chipbreaker and the specified geometry produces predictable chip forms, which contributes directly to improved cycle times and reduced secondary operations. Better surface quality through controlled geometry A 0.2 mm corner radius and a rhombic 55° form support fine finishing while providing sufficient edge strength for mid-range cutting depths. The 7° clearance provides consistent engagement and reduces rubbing, which lowers heat generation at the cutting zone and helps achieve a superior surface finish. For workshops aiming to balance productivity and part quality, the insert’s geometry enables both repeatable dimensional accuracy and reduced rework. Productivity gains from predictable tool life Using a coated grade in the Tiger·tec Gold family means longer effective cutting time before regrinding or indexing is required. The WMP20G composition, combined with the insert’s MM4 chip management, helps maintain cutting performance across a range of feeds and speeds typical for machining rust‑resistant alloys. This predictability supports planning for tool change intervals and machining throughput, improving process reliability on series and job‑shop orders. Practical application and selection guidance The insert is optimised for applications in which stainless steels are the primary material group; the specification supports both medium turning and finishing operations. When selecting cutting parameters, favour stable feeds with moderate cutting speeds to exploit the coating’s heat resistance and the chipbreaker’s efficiency. For assistance in selecting holders, grades or cutting data, Metav Werkzeuge’s advisors can provide targeted recommendations based on workpiece geometry and machine capabilities. For tailored application advice on Walter Tools inserts and to arrange procurement via Metav Werkzeuge, please contact our technical consultants directly at Metav Werkzeuge. Technical data Article number: DCMT11T302-MM4-WMP20G-WALTER Designation: DCMT11T302-MM4 Full designation: DCMT11T302-MM4 WMP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Insert size: 11 Thickness: T3 Clearance angle: 7° Corner radius: 0.2 mm Insert shape: Rhombus 55° Chipbreaker type: MM4 Special features Coating technology: Tiger·tec Gold Grade: WMP20G (coated carbide) Material application: stainless steels Tolerance class: M Designed for stable chip formation and improved tool life FAQ What materials is this insert designed for? The DCMT11T302-MM4 WMP20G insert from Walter Tools is designed primarily for machining stainless steels, providing stable chip control and wear resistance under the typical thermal conditions of these alloys. Which chipbreaker is integrated and what benefit does it offer? This insert features the MM4 chipbreaker, which promotes consistent chip formation and evacuation, supporting uninterrupted turning operations and reducing the likelihood of entangling chips. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating increases heat resistance and wear control, which extends effective cutting life and supports consistent surface quality when processing rust‑resistant alloys. Is this insert suitable for finishing and semi‑roughing? Yes, the 0.2 mm corner radius and the rhombic 55° geometry make the insert suitable for both finishing and medium roughing, offering a balance between edge strength and surface quality. What information is helpful for selecting the correct toolholder? Provide the insert designation DCMT11T302-MM4 WMP20G and intended turning application; holders compatible with the DCMT form and the selected cutting parameters will ensure correct seat and secure clamping for reliable machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. The mentioned brand Walter Tools is cited for product identification; no affiliation with Metav Werkzeuge is implied. The offered item is original, factory‑new goods from Walter Tools.
DCMT11T302-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide performance, precise chip control and stable edge life for reliable turning of stainless steels and heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application advice. DCMT11T302-MM4 WSM01 turning insert — Walter Tools, Tiger‑tec Silver, coated carbide for stainless steels and superalloys DCMT11T302-MM4 WSM01 is an indexable turning insert designed for the productive machining of stainless steels and heat-resistant superalloys, offering controlled chip formation and consistent edge stability in demanding operations Tiger‑tec Silver coated carbide grade WSM01 Optimised chip control with MM4 breaker Suited for stainless steels and superalloys Rhombic 55° form with 7° clearance Improved cutting performance for tough materials The insert delivers high process stability when machining materials that tend to work-harden or generate heat, such as stainless steels and nickel‑based alloys. The WSM01 coated carbide grade is engineered for thermal resistance and edge strength, which reduces the risk of built-up edge and unplanned tool changes. Combined with the MM4 chipbreaker, the geometry supports secure chip control and predictable evacuation, resulting in fewer interruptions and a smoother production flow. Better surface quality with a fine corner radius A modest 0.2 mm corner radius helps to balance tool strength and surface finish: the small radius supports repeatable dimensional control while still producing a fine turned face. The rhombic 55° insert shape provides good access to a range of turning profiles and the 7° clearance angle lowers rubbing, which helps maintain temperature at the cutting edge and improves tool life. For programmes where component finish and tolerance are key, this insert translates geometry into measurable quality. Consistent chip control and repeatable edge life The purpose-designed chipbreaker MM4 is optimised to break and evacuate chips reliably under typical stainless and superalloy feeds, reducing the chance of entanglement or re-cutting. The coated carbide surface from the Tiger‑tec Silver series supports a stable cutting edge and consistent wear behaviour, which contributes to longer intervals between indexing and less process variation. In practice, this offers lower downtime and better overall productivity in batch and single‑piece workflows. Practical selection and integration into production Choosing the correct insert grade and geometry is a rational decision driven by material, cutting speed and machine capability. The DCMT-style profile in this insert family is compatible with common turning toolholders and clamping systems used in industry; the DCMT11T302-MM4 WSM01 designation allows straightforward ordering and material assignment in CAM and tool management systems. For process engineers seeking to increase throughput while keeping surface integrity and repeatability, this insert is a focused solution. Contact Metav Werkzeuge for tailored application advice and recommendations on optimal speeds, feeds and holder compatibility; our technical team will assist with parameter selection and sample calculations specific to the component and machine. Technical data Article number: DCMT11T302-MM4-WSM01-WALTER ISO designation: DCMT11T302-MM4 WSM01 Series: Tiger‑tec Silver Numbers / Core technical data Clearance angle: 7° Corner radius: 0.2 mm Plate form: Rhombic 55° Plate size: 11 Plate thickness: T3 Tolerance class: M Special features Coating: Tiger‑tec Silver (coated carbide) Grade: WSM01 (coated hard metal) Chipbreaker: MM4 Suited materials: stainless steels (M), heat‑resistant superalloys / titanium (S) Execution: T (plate type designation) FAQ What materials is this insert best suited for? The DCMT11T302-MM4 WSM01 turning insert is designed primarily for stainless steels and heat‑resistant superalloys (ISO groups M and S), where thermal resistance and edge stability are essential. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker on this insert promotes controlled chip formation and safe evacuation when turning tough, ductile materials, reducing re-cutting and improving process reliability. Which geometrical features influence surface finish? The small 0.2 mm corner radius and the rhombic 55° form contribute to a fine surface finish while preserving edge strength; the 7° clearance angle minimises rubbing and heat build‑up at the flank. Is the insert compatible with standard DCMT toolholders? Yes, the insert follows the DCMT ISO geometry (DCMT11T302-MM4), making it compatible with widely used indexable turning toolholders that accept DCMT inserts. How does the Tiger‑tec Silver coating benefit productivity? The Tiger‑tec Silver coating improves thermal resistance and wear behaviour, supporting longer edge life and more consistent cutting performance in demanding materials. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; support@walter-tools.com Protected trademarks and trade names belong to their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
DCMT11T302-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Taking advantage of the combination of thermal-stable Tiger·tec Silver coating and an optimised MM4 chipbreaker delivers reliable chip control and extended tool life for tough materials; order directly via Metav Werkzeuge or request specialist advice if needed. DCMT11T302-MM4 WSM20S turning insert — rhombic 55°, Tiger·tec Silver (Walter Tools) A DCMT11T302-MM4 WSM20S turning insert engineered for demanding machining of stainless steels and heat-resistant alloys, combining a fine corner radius with an optimised chipbreaker for consistent surface quality Tiger·tec Silver coating for thermal stability Optimised MM4 chipbreaker for stable chips Rhombic 55° shape for versatile turning 0.2 mm corner radius for fine finishing Consistent performance on stainless steels and superalloys The WSM20S grade, housed in the Tiger·tec Silver series, is formulated for the thermal and mechanical demands of stainless steels and heat-resistant alloys. Its coating technology improves heat resistance and reduces adhesion, which in turn helps maintain a stable cutting edge under high temperatures. For production environments where component integrity and repeatability matter, this insert supports predictable tool life and reduced rework rates, translating into improved process stability and fewer unplanned interruptions. Geometry that enhances surface quality and dimensional control The rhombic 55° form and a 0.2 mm corner radius yield a balance between accessibility and finish capability. The 55° shape permits flexible approach angles on external turning operations, while the small corner radius enables fine finishing passes with reduced cutting forces. A 7° clearance angle minimises rubbing and helps preserve the edge geometry during light to medium cuts, making the insert suitable for finishing or semi-finish passes where consistent surface integrity and dimensional control are required. Improved chip control and extended tool life through design The MM4 chipbreaker is tuned to promote controlled chip formation in tougher materials that can otherwise form long or stringy chips. Combined with the Tiger·tec Silver coating, the insert lowers temperature at the cutting edge and resists built-up edge formation. The result is smoother chip evacuation, fewer interruptions for chip clearing and a reduction in flank wear—factors that contribute to longer effective tool life and more productive machining cycles in series production. Practical application guidance for reliable machining This indexable insert fits typical holders for DCMT geometries and performs well in stable setups and rigid toolholding. It is particularly suited to turning operations involving stainless steels and heat-resistant superalloys where thermal stability and edge robustness are priorities. For optimised results, pairing the insert with appropriate cutting parameters, coolant strategies and a secure clamping system is recommended. For further process tuning or application-specific parameters, Metav Werkzeuge offers technical consultation to match the insert to the machining task. For demanding stainless and high-temperature alloy applications, contact Metav Werkzeuge for tailored advice on Walter Tools Tiger·tec Silver inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DCMT11T302-MM4-WSM20S-WALTER SKU: DCMT11T302-MM4-WSM20S-WALTER Designation: DCMT11T302-MM4 WSM20S Manufacturer: Walter Tools Product type: Turning insert (indexable) Grade / Series: WSM20S, Tiger·tec Silver Core data Clearance angle: 7° Corner radius: 0.2 mm Shape: Rhombic 55° Size: 11 mm Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Chipbreaker: MM4 Material suitability: S / M (heat‑resistant alloys / stainless steels) Application focus: Heavy and difficult-to-cut materials, depending on geometry FAQ Which materials is this insert designed for? The DCMT11T302-MM4 WSM20S turning insert (Walter Tools) is designed primarily for stainless steels and heat‑resistant superalloys, reflecting the S / M material suitability of its grade. What advantage does the MM4 chipbreaker offer? The MM4 chipbreaker produces controlled chips and improves evacuation in tough materials, reducing interruptions and promoting a more consistent cutting process with the WSM20S grade. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver increases thermal resistance and reduces adhesion at the cutting edge, which helps limit built‑up edge and extend tool life when machining heat‑generating workpieces. What does the rhombic 55° geometry mean for operations? The rhombic 55° shape allows flexible approach angles for a variety of external turning tasks and, with a 0.2 mm corner radius, supports fine finishing with stable dimensional results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
DCMT11T302-MM4 WSM30S MM4 Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the WSM30S grade ensures consistent chip control and extended cutting‑edge stability in demanding stainless‑steel turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for process optimisation. DCMT11T302-MM4 WSM30S turning insert — Rhombic 55°, Tiger·tec Silver by Walter Tools DCMT11T302-MM4 WSM30S is a precision turning insert designed for reliable machining of stainless steels and heat‑resistant alloys in production environments Tiger·tec Silver coating for extended tool life Grade WSM30S for stainless steels and superalloys Rhombic 55° insert with 0.2 mm corner radius MM4 chipbreaker for controlled chip formation High performance for stainless and high‑temperature alloys The DCMT11T302-MM4 WSM30S indexable insert combines a wear‑resistant Tiger·tec Silver coating with a specialised WSM30S cemented‑carbide grade to tackle materials that tend to work‑harden or generate elevated cutting temperatures. The geometry and coating work together to reduce built‑up edge and support a stable cut, which translates into fewer interruptions and improved process reliability. This makes the insert particularly suitable where consistent surface quality and repeatable tool life are required when machining stainless steels and heat‑resistant superalloys. Reliable chip control and edge stability for productive turning The MM4 chipbreaker and Rhombic 55° form are engineered to produce predictable chips and to ease evacuation in continuous turning. With a 0.2 mm corner radius and a 7° clearance angle, the insert balances edge strength and fine finishing capability: the corner supports durable performance under interrupted cuts while the clearance angle reduces rubbing and heat build‑up. The result is controlled chip formation, longer time between indexings and more stable component tolerances, benefiting throughput and reducing secondary operations. Practical integration and application guidance This turning insert is supplied in the standard DCMT format and fits common toolholders for negative‑style indexable turning systems. The T3 plate thickness and the M tolerance class ensure repeatable seating and concentricity when mounted in a suitable holder; correct clamping reduces vibration and extends service life. For machining stainless materials, consider moderate cutting speeds and adequate coolant strategies to exploit the WSM30S grade’s thermal resilience while maintaining consistent finish and dimensional stability. For stainless‑steel turning operations where process security matters, choose the Walter Tools Tiger·tec Silver WSM30S insert and contact Metav Werkzeuge for tailored cutting parameter advice and fast supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DCMT11T302-MM4-WSM30S-WALTER Label: Drehwendeschneidplatte DCMT11T302-MM4 WSM30S Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM30S Facts Insert size: 11 Clearance angle: 7° Corner radius: 0.2 mm Plate thickness: T3 Tolerance class: M Special features Chipbreaker: MM4 Plate form: Rhombus 55° Material suitability: S / M Suitable for: stainless steels Geometry: DCMT negative insert FAQ What materials is this insert intended for? The DCMT11T302-MM4 WSM30S insert is formulated for machining stainless steels and high‑temperature superalloys (ISO groups S and M). How does the Tiger·tec Silver coating help in practice? The Tiger·tec Silver coating improves wear resistance and thermal stability, which supports longer tool life and consistent surface finish during prolonged stainless‑steel turning. Which chipbreaker is fitted and why does it matter? The insert uses an MM4 chipbreaker designed for predictable, easily evacuated chips, reducing interruptions and improving process safety. Is this insert compatible with standard DCMT toolholders? Yes, the DCMT geometry and T3 thickness conform to common negative insert holders; proper clamping and seating to the M tolerance class ensure repeatable results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The item offered is an original, factory‑new product of the manufacturer Walter Tools.
DCMT11T304-FK6 WKK10S Wendeplatten - Walter Tools
This turning solution combines Tiger·tec Silver coating performance, a FK6 chipbreaker and a compact 0.4 mm corner radius to deliver stable, economical machining of cast iron; order the insert directly via Metav Werkzeuge or ask our consultants if needed DCMT11T304-FK6 WKK10S — Turning insert, Tiger·tec Silver, Walter Tools The DCMT11T304-FK6 WKK10S is a rhombic 55° indexable turning insert optimised for economical, high-abrasion machining of cast iron components Tiger·tec Silver for abrasion resistance FK6 chipbreaker for controlled chips Rhombic 55° geometry for versatile turning 0.4 mm corner radius for repeatable finishes Longer tool life through optimised coating and grade The WKK10S grade, part of the Tiger·tec Silver family, is a coated carbide solution developed for abrasive cast iron applications. Its surface treatment increases resistance to abrasive wear and thermal loading, which translates to extended tool life and fewer index changes during production. Using this metallurgical combination reduces overall tooling consumption and supports predictable process intervals, delivering measurable cost-efficiency and improved uptime for batch and continuous turning operations. Reliable chip control and consistent surface quality The FK6 chipbreaker geometry ensures reproducible chip formation when machining cast iron (ISO group K), lowering the risk of long stringy chips and enabling safer automated handling. Combined with the rhombic 55° shape and a 7° clearance angle, the insert maintains a stable cutting edge and predictable cutting forces, which helps to achieve consistent surface finishes and dimensional stability. These characteristics support higher feed rates where appropriate, improving cycle times without compromising quality. Geometry and dimensions tailored for precision and flexibility A 0.4 mm corner radius offers a balance between edge robustness and achievable roughness values, while the standard insert size 11 and thickness T3 provide compatibility with a wide range of turning toolholders. The compact geometry suits both finishing and light semi-finishing operations in cast iron, and the insert’s tolerance class M supports repeatable positioning in indexable tool assemblies. This combination makes the insert a practical choice when switching between batch sizes or when integrating into flexible production systems. Process security and predictable results in daily machining The insert’s design focuses on process security: consistent chip breakage, stable wear characteristics and easy indexability contribute to reduced setup time and fewer production interruptions. For operations that demand repeatable outcomes, the WKK10S grade helps maintain cutting-edge integrity over longer tool life, supporting more reliable part quality and reducing the likelihood of scrap. Where machinability varies across cast iron grades, the insert’s abrasion-resistant coating and chip control mitigate common variances, aiding operational robustness. For application advice on Walter Tools Tiger·tec Silver inserts contact Metav Werkzeuge by email info@metav-werkzeuge.com or call +49 2822 7131930 — consultants will advise on choosing DCMT11T304-FK6 WKK10S for specific tasks. Technical data Article number: DCMT11T304-FK6-WKK10S-WALTER SKU: DCMT11T304-FK6-WKK10S-WALTER Core dimensions Insert size: 11 Clearance angle: 7° Corner radius: 0.4 mm Thickness: T3 Materials & special features Grade: WKK10S Series: Tiger·tec Silver Chipbreaker: FK6 Geometry: Rhombus 55° Tolerance class: M Suitability: cast iron (ISO group K) Coated carbide (beschichtetes Hartmetall) FAQ What materials is this insert designed for? The DCMT11T304-FK6 WKK10S insert (Walter Tools turning insert, SKU DCMT11T304-FK6-WKK10S-WALTER) is optimised for machining cast iron and is classified for ISO group K applications. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKK10S grade enhances abrasion resistance and thermal stability, which leads to extended tool life and more predictable wear behaviour in abrasive cast iron machining. Which chipbreaker should be selected for stable chip control? This insert features the FK6 chipbreaker, which is designed to produce short, controllable chips in cast iron, improving handling and reducing risk in automated processes. Can the insert be used for finishing passes? Yes—the 0.4 mm corner radius and rhombic 55° geometry are suitable for fine finishes and light semi-finishing operations, offering a good compromise between edge strength and surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names have been mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
DCMT11T304-FK6 WKK20S Wendeplatten - Walter Tools
Optimise cast iron turning with the DCMT11T304-FK6 WKK20S: the Tiger·tec Silver grade and FK6 chipbreaker combine abrasion resistance with controlled chip formation for reliable, productive machining. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DCMT11T304-FK6 WKK20S indexable turning insert — Tiger·tec Silver grade for cast iron, Walter Tools The DCMT11T304-FK6 WKK20S is a rhombic 55° indexable turning insert engineered for efficient and repeatable machining of cast iron components. Tiger·tec Silver coated grade WKK20S Optimised for cast iron (ISO group K) FK6 chipbreaker for controlled chips Rhombic 55° form with 0.4 mm nose radius High abrasion resistance for consistent productivity The coated carbide grade WKK20S from the Tiger·tec Silver family is formulated to resist the abrasive wear typical of cast iron machining. This results in a stable cutting edge and prolonged tool life when facing the short, brittle chips that cast materials generate. Thanks to the dedicated material focus (ISO group K), the insert supports more consistent cycle times and reduces unexpected rework, helping maintain throughput in serial production and maintenance tasks. Improved chip control reduces interruptions The FK6 chipbreaker is designed to shape and break chips reliably when cutting cast iron, lowering the risk of entanglement and tool damage. Controlled chip formation improves process security on lathes and turning centres and minimises manual clearing interventions. A well-managed chip flow also contributes to a steadier surface finish and fewer machine stops, which supports higher overall equipment effectiveness in daily operations. Geometry tailored for versatile turning operations The rhombic 55° geometry with a 0.4 mm nose radius and 7° relief angle offers a balance between cutting strength and access to varying part profiles. This geometry is suitable for both light finishing cuts and more robust profiling where a compact entry angle is beneficial. The T3 thickness and the M tolerance class ensure dependable seating and repeatable indexing in standard toolholders, aiding quick tool changes and stable cutting conditions. Application support and practical use cases Primarily intended for cast iron turning, this insert performs well in medium to high material removal scenarios where abrasion resistance and chip control are priorities. When paired with appropriate holder geometry and rigid setup, the combination of Tiger·tec Silver coating and FK6 chipbreaker supports productive machining of brake discs, housings and similar grey or nodular cast-iron components. For tailored cutting parameters and process optimisation, Metav Werkzeuge provides consulting to match feed, speed and depth of cut to specific machines and setups. For process reliability with Walter Tools' DCMT11T304-FK6 WKK20S, contact Metav Werkzeuge for tailored application advice and order support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: DCMT11T304-FK6-WKK20S-WALTER Label: Drehwendeschneidplatte DCMT11T304-FK6 WKK20S Walter Tools Product type: indexable turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK20S Chipbreaker: FK6 Shape: Rhombus 55° Size: 11 Thickness: T3 Corner radius: 0.4 Relief angle: 7° Tolerance class: M Numbers / Core technical data Corner radius: 0.4 mm Relief angle: 7° Inscribed circle / size: 11 Thickness designation: T3 Designs / Special features Coating technology: Tiger·tec Silver Schneidstoffsorte: WKK20S (coated carbide) Optimised application: Cast iron (ISO group K) Chipbreaker type: FK6 Plate form: Rhombic 55° Tolerance class: M FAQ What materials is this insert suited for? The DCMT11T304-FK6 WKK20S is designed primarily for cast iron applications (ISO group K) and performs best where abrasive wear and short, breaking chips are expected. How does the Tiger·tec Silver grade benefit machining? The Tiger·tec Silver coating on the WKK20S grade improves abrasion resistance and cutting-edge stability, leading to longer tool life and more consistent component quality in cast iron turning. What advantage does the FK6 chipbreaker provide? The FK6 chipbreaker promotes controlled chip formation and breaking when machining cast iron, reducing downtime for chip removal and improving process reliability. Is the rhombic 55° form suitable for profiling? Yes, the rhombic 55° geometry with a 0.4 mm nose radius offers a versatile compromise between accessibility for profiling and the cutting strength required for stable turning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) with its headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The item offered is original, factory-new goods of the manufacturer.
DCMT11T304-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the WMP20G Tiger·tec Gold grade and the FM4 chipbreaker to secure consistent chip control and stable cutting edges when machining rostfreien Stahl; benefit from the rhombic 55° form and 0.4 mm corner radius for reliable tool life and surface finish. Order directly via Metav Werkzeuge or request application advice from Metav Werkzeuge's consultants. DCMT11T304-FM4 WMP20G turning insert — rhombic 55°, for rostfreien Stahl — Walter Tools The DCMT11T304-FM4 WMP20G is a rhombic 55° indexable insert designed for turning operations on rostfreien Stahl under medium to robust conditions, combining a Tiger·tec Gold coating with an FM4 chipbreaker for stable machining. DCMT11T304-FM4 WMP20G by Walter Tools Tiger·tec Gold coating for secure chip control Optimised for rostfreien Stahl (ISO group M) 0.4 mm corner radius, 7° clearance for stability Consistent process performance through a specialised grade The Tiger·tec Gold WMP20G grade is a coated carbide formulation optimised for machining rostfreien Stahl, where toughness and heat generation demand a reliable cutting material. The coating and substrate pair reduce the tendency for built-up edge and help maintain a stable cutting edge, which translates into fewer interruptions and a more predictable component finish. For manufactures seeking improved process uptime, this combination reduces scrap risk and supports repeatable cycle times. Geometry and chip control that protect the component surface The rhombic 55° shape and the FM4 chipbreaker create a controlled chip flow that prevents long, stringy chips when working with ductile rostfreien Stahl. The 0.4 mm corner radius and 7° clearance distribute cutting forces and reduce edge stress, helping to preserve surface integrity and minimise vibration. These geometric features aid in achieving consistent dimensional accuracy and surface quality, especially on medium to heavy cuts. Practical advantages for production and tool handling The insert’s T3 thickness and standard 11 mm size make it compatible with many common toolholders, enabling straightforward integration into existing turning setups. The coated carbide construction from Walter Tools offers enhanced resistance against abrasive wear while the grade’s toughness supports interrupted cuts and moderate depths of cut. This balance between wear resistance and edge strength makes the insert suitable for mixed production runs where rostfreien Stahl is frequently encountered. Process guidance and application scope Intended primarily for the ISO group M, the insert is recommended for workpieces where heat generation and edge adhesion are concerns. In practice, the WMP20G grade performs well with parameters that favour controlled cutting speeds and steady feed rates; the FM4 chipbreaker assists in chip segmentation and evacuation. For shops aiming to improve productivity on rostfreie materials, the insert offers a dependable compromise between tool life and surface finish. Contact Metav Werkzeuge for tailored application advice on the Walter Tools DCMT11T304-FM4 WMP20G insert — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: DCMT11T304-FM4-WMP20G-WALTER Label: Drehwendeschneidplatte DCMT11T304-FM4 WMP20G Walter Tools Manufacturer: Walter Tools Facts Insert form: Rhombus 55° Insert size: 11 Thickness: T3 Corner radius: 0.4 mm Clearance angle: 7° Chipbreaker: FM4 Special features Grade/series: WMP20G — Tiger·tec Gold Coating type: coated carbide (Tiger·tec Gold technology) Application group: rostfreien Stahl (ISO group M) Execution: T ISO designation: DCMT11T304-FM4 WMP20G FAQ What materials is this turning insert suitable for? The DCMT11T304-FM4 WMP20G insert is specified for rostfreien Stahl and is classified for ISO group M, offering good chip control and edge stability for such materials. Which chipbreaker does the insert use and why is it important? This insert uses the FM4 chipbreaker; it is designed to produce short, manageable chips and support secure chip evacuation during turning operations on rostfreie materials. How does the Tiger·tec Gold technology benefit machining? Tiger·tec Gold provides a coated carbide surface that enhances wear resistance and helps prevent built-up edge, improving tool life and surface finish when machining rostfreien Stahl. Is this insert compatible with standard toolholders? The 11 mm size and T3 thickness of the insert make it compatible with common ISO toolholders designed for rhombic 55° inserts; confirmation against the holder specification is recommended. What edge geometry helps with surface quality? The 0.4 mm corner radius and 7° clearance contribute to a stable cutting edge and controlled force distribution, which supports improved surface finish and dimensional consistency. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT11T304-FM4 WMP20S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating, the WMP20S grade and the FM4 chipbreaker for reliable machining of rostfreier Stahl; the result is stable chip control and extended cutting-edge life — order this insert via Metav Werkzeuge or consult our specialists for application-specific recommendations. DCMT11T304-FM4 · DCMT11T304-FM4 WMP20S (WMP20S) · Tiger·tec Silver · for rostfreier Stahl · Walter Tools DCMT11T304-FM4 WMP20S is a rhombic 55° indexable turning insert with an FM4 chipbreaker, engineered for robust stainless steel turning under moderate to demanding conditions Tiger·tec Silver coating for rostfreier Stahl FM4 chipbreaker for stable chip control Rhombic 55° geometry with 0.4 mm corner radius 7° relief angle for secure cutting engagement Delivering consistent performance on rostfreier Stahl The combination of the coated cemented carbide grade WMP20S and the Tiger·tec Silver technology is focused on process stability when machining rostfreier Stahl. The engineered coating increases wear resistance and supports a secure cutting edge under elevated temperatures and adhesive wear conditions typical for these alloys. Paired with the FM4 chipbreaker, the insert promotes controlled chip formation and evacuation, which reduces the risk of built-up edge and helps maintain tool life. For production environments seeking predictable cycle times, this equates to fewer tool changes and steadier component quality. Geometry tuned for surface finish and repeatability The rhombic 55° shape and a 0.4 mm corner radius are optimised to balance strength and finish. The geometry delivers reliable engagement in shoulder and light profiling operations, while the modest corner radius helps achieve a consistent surface texture without excess cutting forces. The 7° clearance supports secure edge contact and reduces rubbing on the flank, contributing to repeatable results across batches. These design choices make the insert well suited for shops that prioritise part consistency and minimised rework. Process productivity through controlled chip flow and edge stability In industrial turning, predictable chip behaviour and a stable cutting edge translate directly into higher uptime. The FM4 chipbreaker is designed to create compact, manageable chips when cutting rostfreier Stahl, which lowers the risk of chip entanglement and eases machine housekeeping. The coated grade WMP20S supports mid-to-robust cutting conditions, helping to prolong effective tool life and reduce the frequency of indexings. For production planners and toolroom managers this means improved process reliability and a positive effect on overall throughput. Practical integration and handling on standard toolholders The insert designation follows established indexable turning conventions, enabling straightforward fitting into compatible toolholders for the DCMT family. Its T3 thickness and the 11-sized profile allow secure clamping and simple indexing to fresh cutting edges when required. As with all indexable solutions, correct seat contact and torque settings are essential to obtain the expected performance; proper clamping ensures even distribution of cutting loads and prolongs edge life. The insert is therefore a pragmatic choice for workshops seeking an efficient balance between performance and handling. Contact Metav Werkzeuge for an application review and specify the Walter Tools DCMT11T304-FM4 WMP20S insert for reliable rostfreier Stahl machining — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DCMT11T304-FM4-WMP20S-WALTER Description: Drehwendeschneidplatte DCMT11T304-FM4 WMP20S Designation: DCMT11T304-FM4 WMP20S Manufacturer: Walter Tools Facts Insert size: 11 mm Thickness: T3 Corner radius: 0.4 mm Relief angle: 7° Chipbreaker: FM4 Special features Series: Tiger·tec Silver Grade: WMP20S (coated cemented carbide) Geometry: Rhombic 55° Application: rostfreier Stahl (ISO group M) Execution: T style insert FAQ What materials is this insert optimised for? The DCMT11T304-FM4 WMP20S insert is optimised for machining rostfreier Stahl, corresponding to ISO material group M. How does the FM4 chipbreaker affect machining behaviour? The FM4 chipbreaker promotes compact chip formation and reliable evacuation when turning rostfreier Stahl, which aids process stability and reduces the likelihood of chip-related interruptions. Which series and coating does the insert use? This insert belongs to the Tiger·tec Silver series and is supplied in the WMP20S coated carbide grade for enhanced wear resistance. Is this insert compatible with standard DCMT toolholders? Yes, the DCMT11T304-FM4 geometry is designed for conventional DCMT-style toolholders; correct seating and clamping are required to achieve the specified performance. What benefits does the 0.4 mm corner radius provide? A 0.4 mm corner radius balances edge strength and surface finish, helping to deliver repeatable component quality while limiting cutting forces on delicate features. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT11T304-FM4 WMP30G FM4 Wendeplatten - Walter Tools
Take advantage of a high-performance Tiger‑tec Gold grade and the FM4 chipbreaker to ensure stable chip control and extended tool life in stainless‑steel turning. Order the insert directly via Metav Werkzeuge for reliable delivery and application advice, or request consultancy for optimal toolholder pairing. DCMT11T304-FM4 WMP30G turning insert — Tiger‑tec Gold, FM4 chipbreaker (Walter Tools) A DCMT11T304-FM4 WMP30G turning insert engineered for productive medium to robust turning of stainless steel, combining a coated carbide grade with stable chip control and a 0.4 mm corner radius Tiger‑tec Gold coating for long tool life Optimised FM4 chipbreaker for stable chips 7° clearance for reliable cutting geometry Rhombic 55° form for versatile turning Efficient, predictable cutting for stainless steel The insert is built on a Tiger‑tec Gold coated carbide grade that supports consistent performance under the demanding conditions typical for stainless steels. The WMP30G grade is tailored to manage material stickiness and heat generation; this reduces the tendency for build‑up on the cutting edge and helps maintain a stable cutting edge over extended cycles. The FM4 chipbreaker promotes controlled chip formation, which simplifies chip evacuation and reduces interruption times in serial production, resulting in measurable productivity gains. Geometry and design that reduce downtime With a 0.4 mm corner radius and a 7° clearance, the geometry balances robustness and surface finish: the small radius preserves edge strength for interrupted cuts, while the clearance prevents rubbing and excessive temperature rise. The rhombic 55° shape offers a favourable entry angle for a range of turning operations and supports flexible toolholder setups. These combined features translate into fewer tool changes and a lower total cost per component when machining stainless steel under medium to heavy conditions. Practical performance and integration on the shop floor The indexable insert integrates into standard turning toolholders that accept the DCMT profile and benefits from the consistent coating technology of Tiger‑tec Gold, which aids repeatability across batches. The FM4 chipbreaker is particularly useful where chip control is critical for automated machines or tight‑tolerance assemblies. For guidance on matching holders or optimising cutting parameters for specific stainless steel grades, Metav Werkzeuge can provide technical advice and practical recommendations to support quick implementation with minimal trial time. For dependable stainless steel turning with Walter Tools inserts, request the DCMT11T304-FM4 WMP30G via Metav Werkzeuge — technical advisers are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: DCMT11T304-FM4-WMP30G-WALTER Article label: Drehwendeschneidplatte DCMT11T304-FM4 WMP30G Walter Tools Manufacturer: Walter Tools Product type: Turning insert Grade: WMP30G Numbers / Core technical data Corner radius: 0.4 mm Clearance angle: 7° Inscribed circle / size: 11 mm Plate thickness: T3 Insert form angle: 55° Designs / Special features Tiger‑tec Gold coated carbide Chipbreaker: FM4 Suitable for stainless steel machining Rhombic 55° plate form Walter Tools original insert FAQ What materials is this insert suitable for? The DCMT11T304-FM4 WMP30G is designed primarily for stainless steel; the WMP30G grade and Tiger‑tec Gold coating support secure chip formation and edge stability under those conditions. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on this Walter Tools insert promotes short, manageable chips and consistent evacuation, which benefits automated turning and reduces interruption in continuous operations. What does the 7° clearance mean for tool setup? A 7° clearance provides reduced flank contact and lower heat transfer to the insert, improving surface finish and lowering the risk of rubbing when the tool is correctly mounted in a matching holder. Is the insert suitable for interrupted cuts? Yes, the 0.4 mm corner radius and coated carbide grade give the insert robustness for interrupted cuts while still supporting acceptable surface quality. Can standard DCMT toolholders be used with this insert? The insert follows the DCMT geometry and is compatible with toolholders intended for that profile; proper clamping and alignment are essential for best results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered product names are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer (Walter Tools).
DCMT11T304-FM4 WSM01 WSM01 Wendeplatten - Walter Tools
Benefit from the combination of the WSM01 coated carbide grade in the Tiger‑tec Silver series and the FM4 chipbreaker for secure chip control when machining stainless steel and heat‑resistant alloys; the 0.4 mm corner radius and 7° relief angle support stable cutting and reproducible part quality. Order directly via Metav Werkzeuge or consult the team for application‑specific recommendations. DCMT11T304-FM4 WSM01 — Turning insert, Tiger‑tec Silver, FM4, Walter Tools The DCMT11T304-FM4 WSM01 is a rhombic 55° turning insert engineered for productive machining of stainless steel and high‑temperature alloys in industrial turning applications. Tiger‑tec Silver coating for stable cutting FM4 chipbreaker for controlled chip formation Designed for stainless steel and superalloys 0.4 mm corner radius for reliable edge strength Higher productivity through consistent cutting performance The combination of the WSM01 grade and the Tiger‑tec Silver coating produces a reliably wear‑resistant cutting edge suited to demanding materials. As a coated cemented carbide grade specifically formulated for the ISO groups M and S, the insert offers enhanced heat resistance and edge stability; this reduces unscheduled tool changes and supports a steady production flow. The FM4 chipbreaker contributes to predictable chip shapes, which simplifies chip evacuation and lowers the risk of surface damage on sensitive components. These technical characteristics translate directly into measurable process reliability and fewer quality reworks. Material compatibility that secures process windows The insert’s geometry and grade make it appropriate for machining stainless steel (ISO group M) as well as heat‑resistant superalloys (ISO group S). The rhombic 55° form and the 7° free angle deliver a compromise between cutting edge strength and shear control, helping to limit built‑up edge and thermal loading on the tool. For production engineers, this means more consistent dimensional results and improved surface finishing without aggressive toolpath compromises. Where components demand repeatable tolerances and limited thermal distortion, this geometry supports tighter control over the cutting process. Practical benefits for machining and shopfloor efficiency With a 0.4 mm corner radius and a robust FM4 chipbreaker, the insert balances edge toughness with controlled cutting forces. The result is safer roughing and finishing passes on difficult alloys and a reduced incidence of chipping in interrupted cuts. In a manufacturing environment, these benefits lead to less downtime for insert changes and more predictable batch throughput. The DCMT form and T3 thickness integrate into standard holders, enabling rapid tooling set‑ups and straightforward inventory management for production lines. Durable design and recognised brand performance Built in the Tiger‑tec Silver series and manufactured under the Walter Tools portfolio, the insert supports long tool life and repeatable performance in high‑demand operations. The tolerance class M ensures consistent geometry across batches, aiding predictable insert behaviour when transferred between machines. As part of an established product family, the component provides the documentation and specification clarity that maintenance and process engineers require when qualifying tooling for serial production. Contact Metav Werkzeuge for tailored cutting data, availability and application advice on the Walter Tools DCMT11T304-FM4 WSM01 turning insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DCMT11T304-FM4-WSM01-WALTER Label: Drehwendeschneidplatte DCMT11T304-FM4 WSM01 Walter Tools Product type: Drehwendeschneidplatte Grade/Sort: WSM01 Series: Tiger‑tec Silver Manufacturer: Walter Tools Core data Relief angle: 7° Corner radius: 0.4 mm Size: 11 mm Plate thickness: T3 Plate form: Rhombus 55° Tolerance class: M Special features Chipbreaker: FM4 Suitable material groups: S / M Application focus: stainless steel and heat‑resistant superalloys ISO designation: DCMT11T304-FM4 WSM01 FAQ What materials is the DCMT11T304-FM4 WSM01 best suited for? The DCMT11T304-FM4 WSM01 is optimised for stainless steel (ISO group M) and heat‑resistant superalloys (ISO group S), offering heat resistance and edge stability for these demanding materials. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker produces controlled chip forms that simplify evacuation and reduce the risk of surface damage, improving process reliability when using the DCMT11T304-FM4 WSM01 insert. Can this insert be used for finishing as well as roughing? Yes — with its 0.4 mm corner radius and coated carbide grade, the insert provides a balance of toughness and sharpness suitable for both roughing operations and less aggressive finishing passes. Which insert geometry is represented by DCMT11T304? The DCMT11T304 designation describes a rhombic 55° insert profile with a specific thickness and cutting edge configuration; this geometry suits a range of turning tasks where edge strength and access angle are important. What tolerance and batch consistency can be expected? The insert is produced to tolerance class M, ensuring consistent geometry across production batches for dependable tool performance and predictable process planning. Manufacturer: Walter Tools; The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Trademarks and brand names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer.
DCMT11T304-FM4 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from a combination of durable coated carbide and reliable chip control for consistent productivity; the Tiger·tec Silver grade guarantees stable cutting edges in demanding materials while the FM4 chipbreaker reduces downtime—order the insert via Metav Werkzeuge or consult their specialists for application advice. DCMT11T304-FM4 WSM10S — Indexable turning insert, Tiger·tec Silver coating, Walter Tools A DCMT11T304-FM4 WSM10S indexable turning insert designed for turning rostfreier Stahl and heat‑resistant alloys in precision production environments Tiger·tec Silver coating for long tool life FM4 chipbreaker for controlled chips Rhombic 55° shape for versatile turning 0.4 mm corner radius for fine finishing Extended tool life through advanced coating technology The Tiger·tec Silver technology combined with the WSM10S grade produces a coated carbide insert that balances wear resistance and toughness. This coating system helps to reduce flank wear and maintain a stable cutting edge when machining demanding materials such as rostfreier Stahl and high‑temperature alloys (ISO groups M and S). The result is predictable tool life and fewer indexings, which supports steady production rates and lowers per‑part tooling cost. Reliable chip control and surface quality from FM4 geometry The dedicated FM4 chip‑breaker geometry is engineered to produce short, well‑formed chips in both finishing and light roughing operations. Paired with the Rhombic 55° shape and a 0.4 mm corner radius, the geometry minimises built‑up edge formation and improves surface finish consistency. The 7° relief angle reduces rubbing and heat at the cutting edge, translating into better dimensional stability and reduced rework, particularly in interrupted cuts or semi‑finishing passes. Process security across rostfreier Stahl and superalloys This insert is specified for machining rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), where material toughness and thermal load demand a robust grade. The WSM10S designation denotes a coated hardmetal composition optimised for secure chip formation and edge stability under high thermal stress. For manufacturers seeking consistent component tolerances and fewer tool‑related process stops, the insert provides the required reliability for medium to high complexity turning tasks. Integration and operation benefits for workshop efficiency As an indexable turning insert in the DCMT format with T3 plate thickness and an 11 size designation, the component integrates with standard toolholders for quick replacement and minimised machine downtime. The geometry and coating combination reduces the need for frequent operator intervention and supports automated production cycles. Where surface finish and repeatability matter, the insert delivers both economical machining and straightforward tool management in serial production. For machining tasks that demand secure chip control and extended tool life, choose Walter Tools’ DCMT11T304-FM4 WSM10S and contact Metav Werkzeuge for tailored application support via info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical Data Article number: DCMT11T304-FM4-WSM10S-WALTER Name: DCMT11T304-FM4 WSM10S Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM10S Material groups: S / M Shape: Rhombus 55° Chipbreaker: FM4 Relief angle: 7° Corner radius: 0.4 mm Plate thickness: T3 Plate size: 11 Tolerance class: M Execution: T Facts Relief angle: 7° Corner radius: 0.4 mm Plate size: 11 Plate thickness: T3 Tolerance class: M Special features Tiger·tec Silver coated carbide WSM10S grade optimised for rostfreier Stahl and superalloys FM4 chipbreaker for consistent chip control Rhombic 55° form for flexible turning strategies Suitable for finishing and semi‑finishing operations FAQ What materials is this insert suitable for? The DCMT11T304-FM4 WSM10S is specified for rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), reflecting the WSM10S grade and Tiger·tec Silver coating. What benefit does the FM4 chipbreaker provide? The FM4 chipbreaker produces short, controllable chips and reduces built‑up edge, improving surface finish and process stability when machining tougher materials. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating increases thermal resistance and wear protection, which prolongs tool life and supports consistent cutting performance in demanding turning applications. Which insert geometry is used and why is it important? A Rhombic 55° form with a 0.4 mm corner radius and 7° relief delivers a balance between accessibility for varied cuts and the fine edge required for quality finishes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT11T304-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of a high-performance grade and precise geometry to secure stable cutting in demanding applications. The combination of the WSM20S coated grade and the FM4 chipbreaker delivers reliable chip control and extended edge life for machining stainless steel and heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for process-matched recommendations. DCMT11T304-FM4 WSM20S Indexable Insert (Rhombus 55°, 0.4 mm) – Walter Tools A compact indexable insert designed for turning of stainless steel and hard-to-machine superalloys, offering Tiger·tec Silver coating and a dedicated chipbreaker for consistent machining results Tiger·tec Silver coated grade WSM20S For stainless steel and heat‑resistant alloys Rhombic 55° shape, 0.4 mm corner radius FM4 chipbreaker for stable chip control Higher process security when machining tough alloys The combination of the WSM20S grade and the Tiger·tec Silver coating is engineered for applications with high thermal and mechanical loads. This insert ensures stable chip formation and reduced tendency for build-up on the cutting edge when working with stainless steel and heat‑resistant superalloys, which often generate heat and strain the cutting zone. The result is improved machining consistency and fewer interruptions for edge dressing or insert changes, supporting predictable cycle times and production planning. Geometry tuned for precision and surface quality A rhombus 55° form with a 0.4 mm corner radius and 7° clearance provides a balance between robustness and fine surface finish. The FM4 chipbreaker is tailored to control chip flow and breakage in medium to finishing cuts, reducing the risk of snarled chips and tool mark formation. The insert thickness T3 and its ground seating face contribute to repeatable clamping and run-out behaviour, which together help to maintain consistent component tolerances and minimise rework. Practical benefits across workshops and production lines Designed for industrial turning, this indexable solution supports repeatable performance across batch and one-off production. The coated carbide grade extends usable edge life, while the chip control geometry reduces manual chip handling and associated cycle disruptions. As a brand known for precision, Walter Tools offers a robust portfolio and proven manufacturing quality—this insert is a technical option where reliability and predictable tool life contribute directly to operational efficiency. Contact Metav Werkzeuge for application-specific advice on the Walter Tools Tiger·tec Silver inserts and find the optimal grade and geometry for each stainless steel or superalloy task Technical data Article number: DCMT11T304-FM4-WSM20S-WALTER SKU: DCMT11T304-FM4-WSM20S-WALTER WPL designation: DCMT11T304-FM4 ISO designation: DCMT11T304-FM4 WSM20S Facts Insert form: Rhombus 55° Corner radius: 0.4 mm Clearance angle: 7° Thickness: T3 Chipbreaker: FM4 Series: Tiger·tec Silver Grade/sorte: WSM20S Tolerance class: M Special features Coating: Tiger·tec Silver Material: Coated carbide Execution: T Size: 11 Material applicability: stainless steel Typical application: Hard-to-machine materials and some geometries for stainless machining FAQ What materials is this insert suitable for? This insert is suitable for machining stainless steel and heat‑resistant superalloys; the WSM20S grade is formulated to manage heat and deliver stable cutting performance. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker promotes controlled chip formation for medium to finishing cuts, improving surface finish and reducing chip entanglement during turning operations. Is the insert compatible with standard clamping systems? The insert follows common DCMT indexing dimensions and is compatible with holders designed for DCMT11 geometry; correct seating and torque ensure repeatable performance. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances wear resistance and temperature tolerance, extending edge life and supporting consistent results on difficult-to-machine materials. Which industries typically use this insert? This grade and geometry are frequently used in sectors working with stainless steel and high‑temperature alloys, such as energy, chemical processing, and aerospace component manufacturing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the brands listed. The offered item is an original, factory‑new product of the manufacturer.
DCMT11T304-FM4 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of robust chip control, Tiger·tec Silver coating and a compact Rhombus geometry for consistent turning of demanding alloys; order directly via Metav Werkzeuge or consult our advisors for tailored cutting data. DCMT11T304-FM4 WSM30S Rhombus 55° indexable insert — Walter Tools A compact turning insert designed for secure machining of rostfreier Stahl and heat-resistant superalloys, featuring a Tiger·tec Silver coating and an FM4 chipbreaker. Tiger·tec Silver coating for thermal stability Optimised FM4 chipbreaker for secure swarf control Rhombus 55° shape for versatile turning tasks 0.4 mm corner radius for reliable edge support Consistent performance on rostfreier Stahl and superalloys The Tiger·tec Silver grade WSM30S delivers a balanced mix of wear resistance and edge stability, specifically aimed at machining rostfreier Stahl and high-temperature alloys. The coated cemented carbide construction supports secure chip formation under the high heat and edge stress typical of these materials. This results in fewer unplanned tool changes and steadier component quality, making the insert a rational choice where cycle-time stability and reproducible finishes are priorities. Precision geometry that improves process reliability The Rhombus 55° platform combined with the FM4 chipbreaker ensures reliable swarf control and predictable cutting forces. The fairly small 0.4 mm corner radius supports stable cutting edges during interrupted cuts and when turning thin-walled parts, reducing the tendency for edge build-up. Operators and process planners benefit from a consistent cutting behaviour that simplifies feed and speed selection and lowers the risk of surface damage. Practical advantages for production-focused workshops With a design intended for heavy-duty applications in stainless and heat-resistant materials, the insert offers a cost-effective way to handle difficult-to-machine grades. The coated grade keeps flank wear in check and extends the effective tool life, which pays off in lower tool consumption and fewer machine stoppages. The insert format also allows straightforward index changes, contributing to quick insert replacement and minimal downtime. Application guidance and process considerations For best results with rostfreier Stahl and superalloys, combine the insert with stable clamping, modest depths of cut and controlled feed rates to exploit the thermal benefits of the Tiger·tec Silver technology. The FM4 chipbreaker is optimised for medium to heavy feed ranges; adjust cutting speed and coolant strategy according to workpiece alloy and machine capability. This approach maintains edge life and secures consistent surface quality with reduced risk of built-up edge. Contact Metav Werkzeuge for cutting data sheets, recommendations and supply of Walter Tools inserts — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: DCMT11T304-FM4-WSM30S-WALTER Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Silver Core data ISO designation: DCMT11T304-FM4 WSM30S Size: 11 Plate thickness: T3 Corner radius: 0.4 mm Relief angle: 7° Tolerance class: M Special features Chipbreaker: FM4 Shape: Rhombus 55° Grade/sort: WSM30S Material suitability: rostfreier Stahl and superalloys (ISO groups M and S) Coating technology: Tiger·tec Silver FAQ What materials is this insert intended for? The DCMT11T304-FM4 WSM30S insert by Walter Tools is suited for machining rostfreier Stahl and heat-resistant superalloys, indicated by its WSM30S grade and Tiger·tec Silver coating. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker stabilises chip formation and supports secure swarf control during medium to heavy feeds when using the Walter Tools insert DCMT11T304-FM4 WSM30S. What does the 0.4 mm corner radius mean for part finish? A 0.4 mm corner radius provides robust edge support, helping to maintain surface integrity and reduce the risk of edge chipping in demanding turning operations with the Walter Tools insert. Is the insert compatible with standard Rhombus 55° toolholders? Yes, the Rhombus 55° format of the DCMT11T304-FM4 WSM30S matches standard toolholders designed for 55° inserts and allows straightforward indexation. Where can cutting data and supply be obtained? Cutting data sheets and supply for the Walter Tools DCMT11T304-FM4 WSM30S are available via Metav Werkzeuge; contact info@metav-werkzeuge.com for tailored recommendations. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are cited for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer Walter Tools.
DCMT11T304-FM6 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of a Tiger·tec Gold coated grade and an FM6 chipbreaker for stable chip formation and improved edge life, paired with a compact 11 mm rhombic form for versatile turning in rostfreier Stahl; order directly via Metav Werkzeuge or ask the consultants for application support DCMT11T304-FM6 WMP20G Drehwendeschneidplatte — Tiger·tec Gold, optimised for rostfreier Stahl (Walter Tools) DCMT11T304-FM6 WMP20G is a precision turning insert designed for reliable machining of rostfreier Stahl under medium to robust cutting conditions Tiger·tec Gold coated grade WMP20G Optimised FM6 chipbreaker for stable chips 7° clearance angle for secure cutting edge 0.4 mm corner radius for robust profile Rhombic 55° geometry, 11 mm size Consistent performance for rostfreier Stahl turning The DCMT11T304-FM6 WMP20G insert combines a Tiger·tec Gold coating with a WMP20G carbide grade to address the typical challenges of rostfreier Stahl: toughness, tendency to build up on the cutting edge and high thermal loads. The coating improves wear resistance and reduces adhesion, which leads to more consistent tool life and fewer interruptions for tool changes. For production contexts where cycle time and reproducibility matter, the insert’s properties translate into steady component quality and predictable maintenance intervals. Design features that improve process reliability A compact rhombic 55° geometry with a 0.4 mm corner radius and 7° clearance angle provides a stable cutting edge while maintaining flexibility for a range of turning tasks. The FM6 chipbreaker is optimised to generate controllable chips during medium to robust cuts, reducing the risk of entanglement and facilitating chip evacuation. These design elements work together to deliver stable chip control and reduced edge deterioration, which supports higher process reliability and fewer scrap parts. Simple integration and predictable machining results The insert’s standard 11 mm size and T3 thickness allow straightforward replacement in common toolholders, enabling quick changeovers on the shop floor. The combination of coating and grade reduces the need for frequent adjustments to speeds and feeds when switching from one rostfreier Stahl grade to another, making process setup faster and more predictable. For procurement and production planning, this consistency helps to lower process variability and improve overall throughput. Material compatibility and application guidance Engineered primarily for rostfreier Stahl, the grade performs best under medium to robust cutting conditions typical in heavy-duty turning operations. The Tiger·tec Gold technology supports adhesion prevention and heat resistance, while the FM6 chipbreaker assists in achieving uniform chips across varying depths of cut. When used within recommended cutting parameters, the insert contributes to repeatable surface finish and reliable dimensional control in serial production. Contact Metav Werkzeuge for tailored machining recommendations and to arrange supply of Walter Tools inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for expert consultation Technical data SKU: DCMT11T304-FM6-WMP20G-WALTER Designation: DCMT11T304-FM6 WMP20G Product type: Turning insert Manufacturer: Walter Tools Facts Corner radius: 0.4 mm Relief angle: 7° Insert size: 11 mm Thickness: T3 Geometry: Rhombic 55° Chipbreaker: FM6 Special features Tiger·tec Gold coated carbide grade WMP20G Optimised for rostfreier Stahl Tolerance class M Robust edge stability and chip control Series: Tiger·tec Gold FAQ What materials is this insert suited for? The insert is optimised for rostfreier Stahl machining; the WMP20G grade and Tiger·tec Gold coating are selected to handle the toughness and thermal demands of such materials. Which chipforming behaviour can be expected with this insert? The FM6 chipbreaker on the DCMT11T304-FM6 promotes stable, controllable chips during medium to robust turning, improving evacuation and reducing rework. How does the coating influence tool life? The Tiger·tec Gold coating on this Walter Tools insert enhances wear resistance and adhesion control, which typically extends tool life and yields more consistent component output. Is the geometry suitable for finishing and roughing operations? The rhombic 55° form with a 0.4 mm corner radius offers versatility: it supports robust cutting while still achieving acceptable surface quality in finishing passes when parameters are adjusted accordingly. Can the insert be used in standard toolholders without modification? Yes; the 11 mm size and T3 thickness correspond with common insert holders, allowing straightforward integration into existing turning tool assemblies. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
DCMT11T304-FM6 WSM20S FM6 Wendeplatten - Walter Tools
Take advantage of the combination of high thermal stability, secure chip control, and consistent tool life for efficient machining of stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or contact our consultants for application advice. DCMT11T304-FM6 WSM20S — Turning insert, Tiger·tec Silver, FM6 chipbreaker (Walter Tools) DCMT11T304-FM6 WSM20S is an indexable turning insert engineered for reliable chip formation when machining stainless steel and heat‑resistant superalloys. Tiger·tec Silver coating for thermal stability FM6 chipbreaker for secure chip control Rhombic 55° geometry with 7° clearance 0.4 mm nose radius for fine surface finish Maximise process stability with a purpose‑built grade The WSM20S grade, manufactured within the Tiger·tec Silver family, is a coated cemented‑carbide solution designed specifically for demanding materials such as stainless steel and heat‑resistant superalloys. The chemical and mechanical properties of these workpieces tend to generate high temperatures and tend to work‑harden; the coating and substrate combination therefore prioritises thermal resistance and edge stability. This results in a reduction of flank wear and more predictable tool life, which supports consistent cycle times and fewer interruptions in production. The combination of grade and coating enables users to increase cutting parameters within safe limits and improve overall throughput. Precision geometry and chip control for improved surface quality The insert’s Rhombic 55° form and 7° clearance angle are selected to balance cutting forces and access in turning operations, while the FM6 chipformer actively shapes short, controlled chips in interrupted and continuous cuts. A 0.4 mm nose radius supports improved surface finish without excessive cutting loads and is particularly useful for finishing passes where dimensional tolerance and quality are decisive. Because the chip control is handled at the insert geometry level, machining stability is improved and secondary operations for chip management are reduced — a rational improvement that lowers cycle time and enhances operator safety. Practical integration and reliable performance in series production As an indexable insert, the part is suitable for serial production environments where quick indexation and reproducible results matter. The insert thickness T3 and nominal size 11 provide mechanical robustness for moderate to heavy cutting engagements while keeping toolholder compatibility straightforward. The tolerance class M ensures standard interchangeability and predictable seating in commonly used toolholders. Walter Tools’ manufacturing standards support repeatable performance, making these inserts a pragmatic choice for workshops seeking a balance of productivity and economical tool use. For specialised applications, the insert’s behaviour in high‑temperature cutting can be matched with appropriate feeds and speeds determined in trial cuts. Contact Metav Werkzeuge for application recommendations and to secure DCMT11T304-FM6 WSM20S inserts tailored to stainless steel and superalloy machining — personalised advice and supply from Metav Werkzeuge is available by phone or e‑mail Technical data SKU: DCMT11T304-FM6-WSM20S-WALTER Type: Drehwendeschneidplatte Designation: DCMT11T304-FM6 WSM20S Brand: Walter Tools Core data Size: 11 Thickness: T3 Relief angle: 7° Nose radius: 0.4 mm Tolerance class: M Materials & features Grade: WSM20S Coating technology: Tiger·tec Silver Chipbreaker: FM6 Geometry: Rhombic 55° Suitable for: stainless steel; heat‑resistant superalloys / titanium Material indication: S / M FAQ What materials is this insert intended for? The DCMT11T304-FM6 WSM20S insert is specified for machining stainless steel and heat‑resistant superalloys, with the WSM20S grade designed to maintain edge stability under elevated thermal loads. How does the FM6 chipbreaker affect machining? The FM6 chipbreaker on the DCMT11T304-FM6 promotes secure chip formation and reduced entanglement, which helps to maintain consistent surface quality and lowers the risk of cut interruptions. Is this insert compatible with standard toolholders? Yes, the DCMT11T304-FM6 designation follows common indexable insert standards and the tolerance class M ensures interchangeability with compatible toolholders built for Rhombic 55° inserts. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal resistance and protects the cutting edge, enabling more stable cutting in demanding materials and contributing to extended tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand‑new stock from the manufacturer Walter Tools.
DCMT11T304-FM6 WSM30S FM6 Wendeplatten - Walter Tools
Take advantage of a high-performance combination of the Tiger·tec Silver coating and the WSM30S grade for stable cutting in demanding materials; the FM6 chipformer provides consistent chip control while the 7° clearance and 0.4 mm corner radius support reliable edge life. Order the DCMT11T304-FM6 WSM30S directly via Metav Werkzeuge or ask our consultants if needed. DCMT11T304-FM6 WSM30S indexable turning insert — Tiger·tec Silver, for stainless steel and superalloys (Walter Tools) A DCMT11T304-FM6 WSM30S indexable turning insert engineered for tough turning tasks, offering a balance of edge stability and chip control for machining rostfreier Stahl and heat‑resistant alloys. High wear resistance with Tiger·tec Silver coating Optimised chip control FM6 geometry Suitable for stainless steel and superalloys 0.4 mm corner radius for precise edge form Consistent performance under thermal and mechanical load The combination of the Tiger·tec Silver coating and the WSM30S grade is designed to resist abrasive wear and thermal degradation during interruption‑rich turning operations. As a coated cemented carbide grade, it improves tool life in abrasive or sticky materials, translating into fewer indexings and steadier cycle times. This behaviour supports more predictable planning and reduces unplanned tool changes, which is particularly valuable in high‑mix production. Reliable behaviour with stainless steels and superalloys Specified for material groups M (stainless steels) and S (heat‑resistant superalloys and titanium), this insert is shaped to handle adverse chip formation and high temperature at the cutting edge. The modest 7° clearance reduces rubbing while the 0.4 mm corner radius provides a compromise between edge strength and surface finish. In practice, that means safer machining of ductile, work‑hardening rostfreier Stahl and improved resistance to notch wear when tackling superalloys. Practical geometry for stable chip formation and surface quality The FM6 chipformer contributes to controlled segmentation and evacuation of chips across a range of feed rates, helping to avoid built‑up edge and unstable cutting forces. The rhombic 55° form and the specified plate thickness T3 enable secure clamping and repeatable positioning in standard toolholders, while the tolerance class M supports consistent interchangeability. The result is reduced vibration, improved surface appearance and predictable tool performance across batches. Integration into production and typical applications With its compact size and established series background, this insert suits workshops that require productive turning of rostfreier Stahl and difficult alloys—both for roughing under heavier engagement and for finishing passes where edge integrity matters. The robust grade and coating concept aim to lower overall cost per component by extending usable life and reducing downtime for insert changes, making it a practical choice for modern CNC turning centres and job shop environments. Choose Walter Tools Tiger·tec Silver inserts via Metav Werkzeuge for improved process reliability and precise results in demanding materials — contact Metav Werkzeuge for application advice or ordering. Technical data Article number: DCMT11T304-FM6-WSM30S-WALTER Label: Drehwendeschneidplatte DCMT11T304-FM6 WSM30S Walter Tools Type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Size: 11 Thickness: T3 Tolerance class: M Special features Grade: WSM30S Series: Tiger·tec Silver Chipformer: FM6 Material suitability: S / M Plate shape: Rhombus 55° FAQ What materials is this insert designed for? The DCMT11T304-FM6 WSM30S insert is intended for rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), reflecting the WSM30S grade and Tiger·tec Silver series. What does the FM6 chipformer do? FM6 refers to the insert's chipformer geometry; in the DCMT11T304-FM6 WSM30S it promotes controlled chip segmentation and evacuation, improving stability and surface finish in challenging turning operations. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius on this turning insert increases edge strength versus a sharp edge while still allowing fine surface quality, making the insert versatile for both semi‑finishing and finishing passes. Is this insert compatible with standard toolholders? The rhombic 55° form and T3 thickness of the DCMT11T304-FM6 WSM30S are compatible with common clamping systems for indexable turning plates; ensure the holder supports the 55° geometry and T3 plate thickness for secure clamping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only and do not imply any association with our company. The described article is an original, factory‑new product of the manufacturer Walter Tools.
DCMT11T304-FP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of cermet performance, precise FP4 chip control, and robust Rhombus 55° geometry for steady production results; order the DCMT11T304‑FP4 WEP10C turning inserts directly via Metav Werkzeuge or consult our specialists for application guidance. DCMT11T304-FP4 WEP10C indexable turning insert, Cermet grade, Walter Tools The DCMT11T304-FP4 WEP10C is an indexable turning insert designed for fine finishing and reliable chip management in precision turning applications Cermet grade WEP10C for fine finishes FP4 chipbreaker for stable chip control Rhombic 55° form for versatile turning 0.4 mm corner radius for consistent edge strength High-precision finishing and longer tool life The WEP10C composition, part of the Walter Cermet series, delivers a balance of hardness and thermal stability that translates into a noticeably improved surface finish and consistent edge life when compared with conventional grades. Cermet is a ceramic‑metal composite that provides fine grain structure and heat resistance; this means fewer interruptions for edge dressing and a predictable wear behaviour in finishing passes. The result is reduced rework and a steadier output quality for high‑value or tight‑tolerance components. Stable chip control for productive turning cycles Equipped with the FP4 chipbreaker, this insert promotes fragmenting and evacuating chips reliably during turning, which reduces the risk of chip entanglement and machine downtime. The chipbreaker geometry is optimised for controlled shear formation and lower cutting forces in finishing operations, leading to improved process stability and shorter cycle times. In practice, the enhanced chip control supports unattended sequences and contributes to consistent part quality across batch production. Versatile geometry that eases process setup The Rhombus 55° insert form and the 7° relief angle provide a flexible approach geometry that suits a range of turning orientations and toolholder setups. The 0.4 mm corner radius offers a compromise between edge strength and fine detail capability, making the insert suitable for light roughing into finishing transitions. The T3 plate thickness supports stable clamping and repeatable cutting conditions, which simplifies tooling selection and reduces set‑up adjustments on the shop floor. Practical guidance and application recommendations Material suitability should be verified against the manufacturer’s product matrix to ensure optimal performance in the intended application. The insert excels where fine finishes and predictable wear behaviour are priorities; pairing the grade with appropriate cutting parameters will exploit the cermet advantages fully. For specific component geometries or unusual alloys, technical consultation is recommended to tailor feeds and speeds to the toolholder and machine dynamics, thereby maximising both tool life and part quality. Contact Metav Werkzeuge for tailored advice on Walter Tools turning inserts and to discuss delivery options and application support. Technical data Article number: DCMT11T304-FP4-WEP10C-WALTER Label: Drehwendeschneidplatte DCMT11T304-FP4 WEP10C Walter Tools Manufacturer: Walter Tools Numbers / Core technical data Insert size: 11 Relief angle: 7° Corner radius: 0.4 mm Thickness: T3 Tolerance class: M Special features Cermet grade: WEP10C (Walter Cermet series) Chipbreaker: FP4 Plate form: Rhombus 55° ISO designation: DCMT11T304-FP4 WEP10C Execution: T FAQ What applications benefit most from this cermet insert? The DCMT11T304‑FP4 WEP10C insert is intended for precision finishing operations where a fine surface and consistent edge life are required; its WEP10C cermet composition favours stable performance in finish passes. How does the FP4 chipbreaker affect machining stability? The FP4 chipbreaker promotes controlled chip fragmentation and evacuation, reducing the likelihood of chip re‑entanglement and supporting more reliable, productive turning cycles. Is the rhombic 55° form suitable for profiling tasks? Yes, the Rhombus 55° geometry provides flexibility for profiling and general turning tasks, offering positive cutting angles and versatile approach options for various toolholder setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original factory‑new goods of the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com