messschieber beschriftung
Das hier ist der erste PLatzhalter
600mm Workshop Caliper With Pointed Jaws, Fine Adjustment, Monoblock, 0.05mm Vernier, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a 600 mm measuring range, a hardened stainless-steel monoblock beam and a precision fine-adjustment screw to measure large workpieces reliably and efficiently. Order the Workshop caliper M201.336 directly via Metav Werkzeuge or contact our consultants for further advice. Workshop caliper M201.336 — 600 mm range, hardened stainless steel monoblock with fine adjustment A workshop caliper designed for large-format components, combining a 600 mm measuring range with a robust monoblock beam and fine-adjustment mechanism for dependable, repeatable readings. 600 mm measuring range Hardened stainless-steel construction Fine-adjustment screw for repeatable settings Monoblock beam for long-length stability Reliable measurement capacity for large components The caliper is built for workshop and fixture applications where reach and stiffness matter: its 600 mm measuring range places it in the large-range category (500–1,000 mm), which is optimised for handling bigger assemblies such as housings, fixtures and medium-sized mould components. The long beam, realised as a monoblock design, reduces flex and ensures measurements taken across the full length remain reproducible. The mechanical vernier arrangement provides an industrial-grade reading step of 0.05 mm, making the instrument suitable for typical machine‑shop tolerances without relying on batteries or electronics. Robust materials and repeatable operation Constructed from hardened stainless steel with a matt‑chromed scale, the caliper withstands shop-floor conditions and keeps its graduations legible even with regular handling. The fine-adjustment screw allows incremental closing and accurate repeat positioning of the jaws, which is especially useful when measuring awkward or heavy components that require careful alignment. Pointed jaw tips are included to reach narrow grooves or internal features; the longer jaw length of 150 mm gives extra reach for particular tasks while the solid build keeps alignment stable during use. Practical standards and workshop compatibility The instrument uses a traditional vernier system (top: 1/128" for inch readout; bottom: 1/20 mm for metric vernier) that combines inch and metric utility on the same scale. Compliance is managed via recognised norms: DIN 862 applies for shorter jaw variants up to 200 mm, while larger sizes are produced to the manufacturer's workshop standard for long-range instruments. The analogue design makes it a robust choice for heavy daily use and for environments where electronic readouts are unsuitable. Choose the Metav IndustryLine caliper M201.336 for long-range workshop measurement tasks and contact Metav Werkzeuge for tailored advice or to arrange a purchase from our Emmerich facility Technical data Article number: M201.336 GTIN: 4054469101767 ECLASS: 21170344 Category: Messschieber (calipers) Facts Measuring range: 600 mm Measuring range (min): 0 mm Jaw length: 150 mm Resolution/step (vernier): 0.05 mm Nonius/vernier: 1/128" (top) and 1/20 mm (bottom) Tariff code: 90173000 Special features Material: stainless steel, hardened, matt‑chromed scale Fine adjustment: yes Monoblock design: yes Particulars: with pointed tips Construction: analogue/vernier caliper Norms: DIN 862 (jaw length ≤ 200 mm) / factory standard for larger sizes FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 600 mm, making it a large-range instrument suited to medium‑sized components and fixtures. Is the caliper suitable for workshop use and rougher environments? Yes. The hardened stainless-steel construction and matt‑chromed scale make the tool durable for daily workshop use. How precise is the vernier on this caliper? The vernier provides a metric step of 0.05 mm (1/20 mm) and an inch reading via 1/128", which matches common industrial tolerance requirements. Does the instrument include a fine-adjustment mechanism? Yes, the caliper is fitted with a fine-adjustment screw to set and repeat jaw positions precisely. Which standards apply to this caliper? Shorter jaw variants are covered by DIN 862 up to 200 mm; larger sizes, such as the 600 mm instrument, are produced to the manufacturer's workshop standard for long-range models. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Caliper Without Probe Fine Adjustment Monoblock Stainless Steel 0.05mm, DIN 862 - Metav IndustryLine
Take advantage of a robust 600 mm measuring range, hardened stainless construction and a precise fine-adjustment thumb screw to measure large components reliably; order the instrument directly via Metav Werkzeuge or contact their consultants for implementation advice. Workshop caliper M201.326.1 — 600 mm, fine‑adjustment, Monoblock (Metav IndustryLine) The Workshop caliper M201.326.1 is a heavy‑duty analogue caliper engineered for large‑format measurement tasks in machine shops and fixture production. 600 mm measuring range Hardened stainless steel construction Fine‑adjustment thumb screw Supplied in a protective case Reliable reach for large components The large 600 mm measuring range places this instrument in the category for big components, where repeatable reach and stiffness are decisive. The monoblock frame reduces relative movement between beam and jaw so that measurements remain reproducible across the full span. With a jaw length of 200 mm, the caliper provides secure engagement on large workpieces and offers improved leverage where deeper grips are required. This construction supports efficient workshop workflows by combining reach with manageable handling weight. Accurate workshop readings with mechanical vernier control This analogue caliper uses a dual vernier configuration (noted on the instrument as 1/128" top and 1/20 mm bottom), delivering a practical resolution of 0.05 mm suitable for standard industrial inspection in accordance with DIN 862 where applicable. The vernier layout is straightforward for trained staff and yields quick comparative checks without reliance on electronics, which can be an advantage in robust production environments or at dusty workstations. Durable materials and user‑friendly handling Manufactured from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and everyday wear while maintaining legible graduations. The integrated fine‑adjustment thumb screw enables precise closing and positioning of the sliding jaw, reducing hand variability during setting. A solid finish and the monoblock design combine to lower the risk of flexure and maintain measurement integrity over repeated use, which contributes to lower rework rates and steadier production quality. Practical delivery and workshop integration The instrument is supplied in a protective case for secure transport and storage, which simplifies logistics for workshop use and on‑site measurement tasks. As an analogue tool it offers immediate readiness without batteries, and its simple mechanical design ensures straightforward maintenance routines. For applications requiring traceable calibration, Metav can advise on suitable calibration options and intervals to match quality management systems. Contact Metav Werkzeuge for tailored advice on integrating the M201.326.1 workshop caliper into production workflows and to confirm availability from stock in Emmerich Technical Data Article number: M201.326.1 GTIN: 4054469101538 Weight: 4.5 kg Measuring range: 0–600 mm Jaw length: 200 mm Facts Resolution (vernier): 0.05 mm Tariff number: 90173000 Compliance: DIN 862 (applies for jaw length up to 200 mm) Special features Hardened stainless steel; matt‑chromed scale Monoblock construction Fine‑adjustment thumb screw Analogue vernier (1/128" top, 1/20 mm bottom) Supplied in protective case FAQ What measuring range does this caliper cover? The Workshop caliper M201.326.1 covers a measuring range of 0–600 mm, designed for large components and assembly measurements. What accuracy and resolution can be expected? The vernier setup provides a practical resolution of 0.05 mm; in workshop practice this equates to the standard mechanical accuracy range suitable for machine‑shop inspections and routine quality checks. Is the instrument suitable for heavy or large workpieces? Yes — the monoblock frame, 600 mm reach and a 200 mm jaw length make the instrument appropriate for larger components where stiffness and repeatability matter. What materials and finish are used? The caliper is made from hardened stainless steel with a matt‑chromed scale for enhanced durability and clear readability under workshop conditions. What is included in the delivery? Delivery includes the workshop caliper M201.326.1 and a protective case for transport and storage Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Caliper Without Probe For Outside, Inside And Step Measurement, Hardened Stainless Steel, Fine Adjustment, Wooden Case - Metav IndustryLine
Combining a hardened stainless-steel construction, a 600 mm measuring range and a fine-adjustment screw provides stable, reproducible results on large workshop components; ideal where rigidity and repeatability matter. Order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Workshop Caliper M201.316 — 600 mm stainless steel, 0.02 mm vernier (Metav IndustryLine) A Workshop Caliper M201.316 engineered for long-reach external, internal and step measurements in heavy workshop and fabrication settings. 600 mm measuring range for large components Hardened stainless steel construction Fine-adjustment screw for precise setting Vernier scales with 0.02 mm resolution Repeatable precision for large components The caliper’s 600 mm measuring range places it in the long-bar category (500–1,000 mm), making it suitable for sizeable workpieces such as housings, fixtures and large fittings. The monoblock design increases profile stiffness across the entire beam, reducing deflection and helping to keep measurement uncertainty low when working at extended reach. The hardened stainless steel body with a matt‑chromed scale ensures resistance to corrosion and wear, which maintains accurate graduations even after prolonged workshop use. This combination supports consistent results in repetitive quality-control tasks and reduces rework. Engineered for robust workshop use and clear benefits Long jaws (150 mm) and a robust jaw geometry allow secure seating on external and internal edges as well as reliable step measurements; the caliper is specified for external, internal and step measurements. The mechanical construction avoids electronics, offering a maintenance‑free solution where ruggedness is essential. The factory standard (Werksnorm) build focuses on practical longevity: hardened measuring surfaces resist edge wear, while the matt finish minimises glare and simplifies reading under workshop lighting. For production environments that prioritise uptime and traceable routine checks, the tool’s mechanical simplicity and durability translate directly into lower operating risk. Precise analogue measurement with fine adjustment This analogue vernier instrument provides a metric reading resolution of 0.02 mm, derived from the vernier arrangement shown on the scale; the dual-scale arrangement also supports imperial reading via the 1/1000" marking for inch-based checking. The fine-adjustment screw allows the operator to approach the final measurement gently and lock the slider without overshoot, improving repeatability when measuring narrow tolerances. Because the caliper is purely mechanical, it requires no batteries and is immediately available for intermittent or continuous use in both shopfloor inspection and assembly operations. Clear graduations and tactile control make it especially suitable for skilled machinists and maintenance technicians who require direct, dependable measurement feedback. Contact Metav Werkzeuge today on +49 2822 7131930 or info@metav-werkzeuge.com to discuss application details or to secure the Metav IndustryLine 600 mm workshop caliper for in-house measuring tasks Technical Data Article number / SKU: M201.316 GTIN: 4054469101354 ECLASS: 21170344 Norm: Werksnorm Facts Measuring range: 0–600 mm Resolution: 0.02 mm Jaw length: 150 mm Nonius / vernier: 1/1000" (top) and 1/50 mm (bottom) Special features Monoblock design Fine-adjustment screw Hardened stainless steel with matt‑chromed scale Analogue vernier operation Suitable for external, internal and step measurements FAQ What measuring range does this caliper cover? The Workshop Caliper M201.316 covers a measuring range of 0–600 mm, placing it in the long‑bar category for larger components. What resolution and scales are available on the instrument? The caliper features a vernier resolution of 0.02 mm on the metric scale and an imperial reference of 1/1000" for inch‑based checks. Is the caliper suitable for internal and step measurements? Yes — the design is specified for external, internal and step measurements and includes elongated jaws (150 mm) to reach deeper features. Does the instrument require batteries or electronic calibration? No — this is an analogue vernier caliper with mechanical fine adjustment; it operates without batteries and is delivered to factory standard. What material and surface treatment are used for the measuring surfaces? The caliper is manufactured from hardened stainless steel with a matt‑chromed scale to improve wear resistance and readability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Caliper Without Tip 0.05mm Resolution Fine Adjustment Monoblock, Hardened Stainless Steel 150mm Jaws - Metav IndustryLine
Benefit from a robust hardened stainless-steel monoblock design and the 600 mm measuring range with fine adjustment for repeatable workshop measurement results; order the caliper directly via Metav Werkzeuge or consult our advisors for specification support. M201.326 Workshop Vernier Caliper 0–600 mm — Metav IndustryLine, stainless steel, fine adjustment The M201.326 is a workshop vernier caliper designed for long-range dimensional checks in machine shops and fabrication environments, combining a rugged monoblock frame with a fine‑adjustment spindle for controlled positioning. 600 mm measuring range for large components Hardened stainless-steel monoblock construction Fine-adjustment spindle for precise positioning Dual vernier: 1/128" top and 1/20 mm bottom Long reach with workshop-grade stiffness This long-bar instrument offers a 600 mm measuring range that places it in the category for large-format workshop calipers, suitable where extended reach and stable guidance are required. The extended reach is paired with a jaw length 150 mm, which improves clamping contact on deeper workpieces and helps maintain alignment during measurement. Because the scale length is substantial, the design prioritises profile rigidity so measurements remain reproducible across the full span — an important consideration for fixtures, large assemblies and machine components that require consistent checks. Built to resist everyday workshop wear The measuring frame is made from hardened stainless steel with a matt-chrome scale, providing corrosion resistance and long service life under regular use. The monoblock construction reduces flex and wear at the sliding junction, while a precision-machined finish preserves the vernier alignment over time. A fine-adjustment spindle is integrated for small, controlled movements of the jaw, enabling exact seating before reading; this reduces operator-induced variation and speeds up routine inspection. The overall build quality supports frequent use in demanding industrial settings. Clear analogue reading and practical standard compliance The analogue vernier layout provides a clear dual-scale reading — 1/128" on the top and 1/20 mm on the bottom — delivering an effective resolution of 0.05 mm, which aligns with common workshop tolerances. The caliper is supplied to factory standard for sizes above 250 mm (norm reference: DIN 862 up to 200 mm), ensuring the instrument meets established mechanical requirements for vernier instruments while reflecting manufacturing adaptations for larger gauges. The simple, mechanical operation requires no batteries and is straightforward to integrate into existing QA routines where robust, repeatable checks are needed. For dependable long-range measurement with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for supply or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.326 GTIN: 4054469101521 Manufacturer: Metav IndustryLine Facts Measuring range: 0–600 mm Resolution: 0.05 mm Jaw length: 150 mm Weight: 3.1 kg Scale finish: matt-chrome Nonius/vernier: 1/128" (top); 1/20 mm (bottom) Norm: DIN 862 up to 200 mm; factory standard above 250 mm Special features Monoblock frame Fine-adjustment spindle Hardened stainless-steel construction Analogue vernier caliper for workshop use Designed for large-component measurement FAQ What measurement range does this caliper cover? The M201.326 workshop vernier caliper covers a measuring range of 0–600 mm, suitable for large components and extended checks. What level of resolution and repeatability is provided? With a vernier arrangement that yields a resolution of 0.05 mm, the M201.326 offers workshop-grade repeatability appropriate for standard machine‑shop inspections. Which materials and finishes are used on the caliper? The M201.326 is made from hardened stainless steel with a matt-chrome scale, combining corrosion resistance with durable surface legibility. Is the caliper compliant with recognised standards? The instrument follows DIN 862 for sizes up to 200 mm; for this 600 mm version, the caliper is produced to the manufacturer's standard to ensure suitability for extended lengths. Does the caliper include a fine-adjustment mechanism? Yes, the M201.326 incorporates a fine-adjustment spindle to enable controlled jaw movement and more reliable seating before reading. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Precision Caliper Monoblock Fine Adjustment Stainless Steel Matt Chrome Scale, Nonius 1/128" / 1/20mm, DIN 862 - Metav IndustryLine
Take advantage of a robust 600 mm measuring range combined with hardened stainless-steel construction and a fine-adjustment slide for repeatable workshop measurements. Order the device directly via Metav Werkzeuge or ask the technical consultants for application advice. M201.326.2 Workshop caliper — 600 mm, hardened stainless steel with fine adjustment (Metav IndustryLine) The M201.326.2 is a heavy‑duty 600 mm workshop caliper engineered for long‑range component measurement, featuring a monoblock frame and a matt‑chromed scale for clear readings. Hardened stainless‑steel construction 600 mm measuring range Fine adjustment for precise setting Monoblock frame for increased stiffness Robust construction that keeps measurements stable The caliper is built from hardened stainless steel with a matt‑chromed scale, delivering resistance to corrosion and reliable legibility in workshop conditions. The monoblock design reduces flex along the beam, which improves reproducibility when measuring larger parts; this is especially relevant where repeated checks are carried out on fixtures or assemblies. The integrated fine adjustment allows controlled jaw movement for exact positioning, so measurements can be set smoothly without sudden jumps, reducing setup time and scrap rates. Vernier precision and clear standards for traceable results Equipped with a dual vernier — imperial at the top and metric at the bottom — the instrument provides practical, workshop‑grade resolution. The metric vernier corresponds to a 0.05 mm division, which aligns with the common industrial mechanical standard for calipers and supports routine quality control tasks. Compliance follows DIN 862 for jaw lengths up to 200 mm; larger jaw configurations are produced to the factory standard to ensure structural integrity over the full 600 mm range. This combination of vernier readability and normative alignment makes the caliper suitable for repeatable dimensional checks without reliance on electronics. Designed for heavy workshop use and straightforward handling Longer measuring ranges introduce challenges such as bar deflection and handling ergonomics; the M201.326.2 addresses these with a rigid beam profile and a fine‑movement thumbwheel that facilitates single‑handed, precise adjustments. The matt‑chromed scale reduces glare under strong workshop lighting while the robust jaws cope with everyday contact wear. As a long‑bar workshop caliper in the 500–1,000 mm class, it is tailored to measure larger castings, housings and fixtures where stiffness and repeatability matter more than compactness. For robust long‑range measurements rely on the Metav IndustryLine M201.326.2 — contact Metav Werkzeuge in Emmerich for detailed application guidance or to arrange supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M201.326.2 GTIN: 4054469101545 Manufacturer: Metav IndustryLine eClass: 21170344 Norm: DIN 862 (jaw length ≤ 200 mm), factory standard from 250 mm Facts Measuring range: 0–600 mm Maximum measuring length: 600 mm Jaw length: 300 mm Resolution (vernier): 0.05 mm Scale system: Metric vernier (1/20 mm) and imperial vernier (1/128") Special features Material: hardened stainless steel, matt‑chromed scale Monoblock frame construction Fine adjustment (feineinstellung) for controlled jaw travel Analog vernier operation (mechanical) Designed for long‑bar workshop measurements (500–1,000 mm class) Without measuring tip (workshop style jaws) FAQ What accuracy can be expected from this long‑range workshop caliper? The M201.326.2 delivers vernier resolution of 0.05 mm, consistent with industrial mechanical caliper practice, providing reliable repeatability for workshop checks. Is the caliper suitable for both metric and imperial measurements? Yes, the device features a metric vernier (1/20 mm) and an imperial vernier (1/128"), allowing direct reading in both systems. Which materials is the caliper intended for when checking components? The caliper measures metallic and non‑metallic parts dimensionally; its hardened stainless‑steel construction ensures durability when used on typical workshop components such as castings, aluminium housings and machined steel parts. Does the instrument comply with recognised norms? The instrument is manufactured to meet DIN 862 requirements for jaw lengths up to 200 mm; larger jaw configurations conform to the factory standard to maintain beam stiffness over the full 600 mm range. How does the fine adjustment improve measurement workflow? Fine adjustment enables precise positioning of the jaws with minimal overshoot, which speeds up setup and reduces measurement variability when performing repeat checks on assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70mm Pocket Precision Caliper Mono Stainless Steel 0.05mm Vernier, Depth Gauge, Locking Screw, Plastic Case - Metav IndustryLine
Compact monoblock stainless steel construction and a 0.05 mm vernier deliver reliable, repeatable measurements in a pocket-sized format; combine accuracy and robustness for efficient workshop checks. Order the caliper directly via Metav Werkzeuge or ask our consultants if needed. M201.000 Pocket Caliper Mono — Stainless steel, 70 mm, 0.05 mm vernier The M201.000 pocket caliper is a compact, monoblock measuring tool for quick external, internal, depth and step checks in workshop and inspection routines. Pocket caliper, compact monoblock design Stainless steel, matt chrome finish 0.05 mm vernier resolution, DIN 862 Four-function measurement: in/out/depth/step Precision in a compact format for rapid checks Built for fast, dependable control work, this pocket caliper combines a rigid monoblock body with a vernier graduation of 0.05 mm to provide clear, unambiguous readings in routine tasks. Conformity with DIN 862 ensures that the measuring behaviour and tolerances meet recognised workshop standards, making the instrument suitable for machine shops, maintenance departments and quality-control benches. The compact form reduces set-up time for frequent inspections and supports a streamlined workflow, while the matt chrome surface improves wear resistance and reduces glare during reading. Four-way measuring capability to reduce tool swaps Featuring true four-function measurement — outside, inside, depth and step — the caliper eliminates the need for separate gauges for many everyday checks. The integrated depth gauge and the concise vernier scale let operators complete multi-step inspections without changing tools, increasing throughput and simplifying documentary processes. A robust locking screw secures the slider during measurement transfer, preventing read-off errors and easing repeatability when transferring dimensions to inspection sheets or CNC set-up sheets. Durable design, low maintenance, high reliability Manufactured from stainless steel and finished in matt chrome, the instrument resists corrosion and stands up to regular workshop use with minimal upkeep. The analogue vernier construction is free of batteries and electronics, delivering a maintenance-light solution for straightforward measurement tasks. The simple mechanical design, combined with a compact footprint, supports portability between machines and inspection points while maintaining the precision demanded by everyday production control. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge GmbH in Emmerich for tailored advice and reliable supply Technical data Article number: M201.000 GTIN: 4054469100005 ECLASS: 21170344 Core technical data Measurement range: 0–70 mm Resolution (graduation): 0.05 mm Jaw length: 20/9 mm Vernier: 1/20–29 mm (lower) Design: analogue (nonius) Features Monoblock construction Stainless steel (inox) Matt chrome plated Locking screw for slider Depth gauge included Four-function measurement: outside, inside, depth, step Complies with DIN 862 Pocket-size category: Micro (0–100 mm) FAQ Is this caliper suitable for general workshop use? Yes. The M201.000 pocket caliper is designed for everyday workshop and inspection tasks, offering robust stainless-steel construction and a practical format for frequent checks. What measurement functions are available with this instrument? The device supports outside and inside measurements, depth measurement and step measurement thanks to its four-function measuring design. How fine is the reading on the vernier scale? The vernier provides a resolution of 0.05 mm, enabling precise, repeatable readings aligned with DIN 862 standards. Does the caliper require batteries or electronic maintenance? No. As an analogue vernier caliper, the instrument operates without batteries and requires only basic mechanical care. Can the caliper be used for quick depth checks on components? Yes. The integrated depth gauge permits rapid depth and shoulder checks without changing tools, speeding inspection routines. Is the instrument resistant to workshop environments? Constructed from stainless steel and finished in matt chrome, the caliper offers good resistance to wear and corrosion typical in production settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80 x 7.5mm Depth Stop For Pocket Caliper, Stainless Hardened Ground Lapped – Metav IndustryLine
Take advantage of a compact, hardened stainless steel depth stop that delivers repeatable depth readings and quick retrofit to pocket calipers; order directly via Metav Werkzeuge or consult the Metav team for application advice. M401.030 Depth Measuring Stop — 80 × 7.5 mm, Hardened Stainless Steel (Metav IndustryLine) The M401.030 is a compact depth measuring stop designed for pocket calipers up to 200 mm, offering precise depth control for small bores, slots and recesses. 80 × 7.5 mm compact depth stop Hardened, finely ground and lapped stainless steel Compatible with pocket calipers up to 200 mm Consistent depth readings that reduce rework The compact 80 × 7.5 mm stop provides a stable reference for repeated depth measurements, turning manual depth checks into a reliable routine. Fitted to an analogue pocket caliper, the accessory creates a reproducible contact surface that minimises variation from hand pressure and fixturing. The hardened, finely ground and lapped surface ensures minimal seating deformation, which translates directly into fewer salvages and less time spent on corrective work — a clear efficiency gain for production and inspection tasks. Fits standard pocket calipers for fast retrofitting Designed for use with pocket calipers in the standard measuring range (up to 200 mm), the attachment integrates without altering normal caliper operation. The low-profile geometry keeps the caliper balanced for one-handed handling while extending its functionality to controlled depth measurement. As an accessory for analogue nonius calipers, the stop is particularly useful in workshops and inspection benches where compact tools are preferred; it enables quick setup and repeat measurement sequences, improving throughput without requiring additional instruments. Robust construction for long-term accuracy Manufactured from hardened stainless steel, the stop resists wear and corrosion in workshop environments and preserves the measurement edge over many cycles. The lapped finish reduces micro-roughness and improves seating consistency against workpiece surfaces, which helps maintain accuracy between calibrations. Low maintenance and durable by design, the accessory supports reliable metrology routines and reduces the frequency of part replacements, contributing to stable measurement quality over time. For precise, repeatable depth measurements choose the Metav IndustryLine M401.030 — contact Metav Werkzeuge in Emmerich for tailored advice or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: M401.030 GTIN: 4054469143613 ECLASS: 21029210 Tariff number: 90178090 Measurements Dimension: 80 × 7.5 mm Compatible caliper range: up to 200 mm Analogue caliper compatible: yes Special features Material: stainless steel, hardened, finely ground and lapped Suitable for depth measurements in bores, slots and recesses Category: caliper accessory / depth stop FAQ Is this depth stop suitable for digital calipers as well? The M401.030 is specified for pocket calipers up to 200 mm and is primarily designed for analogue (nonius) fittings; it can be used with some digital models if the caliper geometry allows the same mounting, but mechanical fit should be checked before use. What benefits does the hardened, lapped surface provide? The hardened, finely ground and lapped finish on the depth stop ensures wear resistance and a smooth seating surface, which preserves measurement repeatability and reduces the risk of surface damage to delicate parts. Can the M401.030 be used for deep bore measurements? The compact geometry of the stop is optimised for shallow to moderate depths typical of pocket-caliper applications; for very deep bores, longer specialised depth gauges are recommended. Does the accessory affect caliper zero or calibration? When mounted correctly, the depth stop does not alter the caliper zero setting; standard calibration procedures remain valid and the accessory supports consistent depth references during routine checks. Which workshop applications benefit most from this depth stop? The attachment is ideal for fine mechanical work, small component inspection and repetitive depth checks in production environments where a standard pocket caliper is already in use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Depth Gauge 250mm Base 0.05mm Vernier Stainless Steel Matt Chrome Scale DIN 862, Supplied in Case - Metav IndustryLine
Take advantage of a long 800 mm measuring range combined with a reliable 0.05 mm vernier and robust stainless steel construction for consistent depth control on large components; order directly via Metav Werkzeuge or contact our consultants for specification support. Depth gauge M204.095 — Depth measuring instrument, 800 mm range, 0.05 mm (Metav IndustryLine) The Depth gauge M204.095 is a heavy-duty, analogue depth measuring instrument designed for large-format workshop and toolroom applications, compliant with DIN 862. 800 mm measuring range for large components 0.05 mm vernier resolution (1/20 mm) Stainless steel body, matt‑chromed scale Protective case included and locking screw Reliable long-range depth measurement for large workpieces The instrument is built around an 800 mm measuring range that places it in the class of long‑bar calipers for substantial components. This reach is paired with a 250 mm bridge that provides a stable support for depth measurements across extended spans; the greater base length reduces tilting and improves repeatability when assessing recesses, bores or assembly features. The construction focuses on dimensional stability so that measurements remain reproducible across production batches and during setup operations. Verifiable workshop precision and standard conformity Featuring a mechanical vernier with 0.05 mm graduation, the gauge follows the familiar analogue reading method defined in DIN 862, making it suitable for everyday quality control tasks in machining and metalworking. A 0.05 mm vernier corresponds to the industry standard for robust workshop checks and allows clear, verifiable readings without relying on electronics. The normative designation ensures compatibility with inspection routines and documentation in regulated production environments. Durable materials and practical handling reduce downtime Manufactured from stainless steel with a matt‑chromed scale and vernier, the depth gauge resists corrosion and surface wear that can affect measurement legibility. A positive locking screw secures the slider after setting, preventing unintentional drift during transfer or marking activities. For transport and storage, the tool is supplied in a protective case, safeguarding the scale and vernier from shocks and contamination between uses and preserving calibration integrity for longer service life. Application focus and operational benefits in the workshop This depth measuring instrument is well suited to heavy machining, fixture and mould assembly, and large‑component inspection where long, stable measurement spans are required. The analogue design avoids battery dependence and simplifies routine checks on the shop floor, while the robust finish and locking feature support repeated, reliable use. Specifiers and purchasers will value the straightforward traceability enabled by the DIN reference and the long measuring range when integrating the gauge into existing inspection plans. For specification advice and swift supply from our Emmerich stock, contact Metav Werkzeuge about the Metav IndustryLine depth gauge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: M204.095 GTIN: 4054469102788 Norm: DIN 862 Manufacturer: Metav IndustryLine Facts Measuring range: 800 mm Bridge / base length: 250 mm Vernier resolution: 0.05 mm (1/20 mm) Analogue vernier type Special features Stainless steel construction Scale and vernier matt‑chromed Locking screw for slider fixation Supplied in protective case EClass: 21170349 Tariff number: 90173000 FAQ What measuring range does the depth gauge cover? The depth gauge offers an 800 mm measuring range suitable for large components and long‑span depth checks. How precise is the instrument in workshop use? With a mechanical vernier of 0.05 mm resolution and conformity to DIN 862, the instrument provides industry‑standard precision for routine inspection tasks. Is the tool protected for transport and storage? Yes, the depth measuring instrument is supplied in a protective case to reduce risk of damage during transport and in‑house handling. Does the gauge include any features to prevent accidental change during use? A locking screw secures the slider after adjustment, ensuring measurements remain fixed while transferring or marking. Which material is the gauge made from and how does that affect durability? The body is made of stainless steel with a matt‑chromed scale and vernier, offering corrosion resistance and long‑term legibility in workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Precision Caliper Without Probe Fine Adjustment Monoblock Stainless Steel 150mm Jaws DIN 862 - Metav IndustryLine
Take advantage of the combination of robust monoblock construction, a wide 800 mm measuring range and a fine-adjustment screw for reproducible results on large components; order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. Workshop caliper M201.328 — 800 mm analogue caliper with fine adjustment, Metav IndustryLine Workshop caliper M201.328 for large-format measuring tasks in metalworking and fabrication, designed as a monoblock instrument for stable handling and repeatable readings 800 mm measurement range for large components Hardened stainless steel with matt chrome scale Fine-adjustment screw for precise setting DIN 862 conformity for workshop accuracy Stable design for repeatable measurements on large parts The monoblock construction delivers a rigid measuring frame that reduces bending and vibration during long-span measurements. Built from hardened stainless steel with a matt-chrome scaled surface, the instrument resists corrosion while keeping the scale legible under workshop lighting. With an 800 mm measuring range and 150 mm jaws, the caliper is targeted at larger assemblies where stiffness directly improves repeatability. The mass of the instrument contributes to stable contact during a measurement, which in turn reduces variability between successive readings. Precise setting and clear analogue reading for efficient inspection Equipped with a dedicated fine-adjustment screw, the caliper enables careful closing and positioning of the jaws before the reading is taken, making it quicker to obtain a stable measurement with minimal overshoot. The vernier arrangement gives a resolution of 0.05 mm on the lower scale, consistent with common workshop tolerances; an additional fine vernier on the upper scale refines alignment during coarse positioning. This combination of setting control and vernier clarity speeds up routine checks and reduces the need for repeat measurements, improving throughput in quality control tasks. Suited to workshop routines and normative accuracy requirements Classified as a large-range (500–1,000 mm) caliper, the instrument bridges the gap between standard and heavy-duty measuring tools: long enough for sizeable components yet still manageable for single-person use in many setups. The measuring geometry and the declared conformity to DIN 862 (applicable given the jaw length) provide a familiar reference frame for machinists and inspectors, simplifying integration into existing inspection procedures. Robust finishing and the practical jaw length make the tool effective for external, internal and step measurements where a trusty analogue instrument is preferred. Choose the Metav IndustryLine M201.328 for reliable large-range workshop measurement and contact Metav Werkzeuge in Emmerich for tailored technical advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M201.328 GTIN: 4054469101552 Brand: Metav IndustryLine Material: hardened stainless steel, matt-chrome scale Facts Measuring range: 0–800 mm Jaw length: 150 mm Resolution (vernier): 0.05 mm Weight: 5.5 kg Standard: DIN 862 (applies for this jaw length) Special features Monoblock frame Fine-adjustment screw Vernier configuration: upper and lower vernier scales Suitable for workshop, metalworking and fabrication applications FAQ What measuring range does the caliper cover? The M201.328 covers a measuring range of 0–800 mm, placing it in the large-range caliper category for sizeable components. Is the instrument corrosion-resistant and suitable for workshop use? Yes, the caliper is made from hardened stainless steel with a matt-chrome scale finish, offering good corrosion resistance and durability in workshop environments. How precise is the analogue reading on this caliper? The vernier arrangement on the instrument provides a reading resolution of 0.05 mm, matching common industrial workshop tolerances. Does the caliper meet recognised standards? The tool is specified in accordance with DIN 862 for the given jaw length, providing a normative basis for workshop accuracy and inspection routines. Can the M201.328 be used for internal, external and step measurements? Yes, the caliper’s geometry supports external, internal and step measurements, making it versatile for routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper With 300mm Jaws, Fine Adjustment, Monoblock, 0.05mm Vernier, Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of robust stainless‑steel construction, an 800 mm measuring range and a precise fine‑adjustment mechanism for reproducible large‑format measurements in the workshop. Order the Metav IndustryLine Workshop Caliper M201.338.2 directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Workshop Caliper M201.338.2 — 800 mm stainless monoblock with fine adjustment A robust Metav IndustryLine Workshop Caliper M201.338.2 engineered for heavy‑duty external, internal and step measurements up to 800 mm in demanding workshop environments Hardened stainless‑steel construction Monoblock design for high rigidity Fine‑adjustment wheel for precise setting Delivered in a protective transport case Large‑range accuracy for heavy workshop work The caliper offers an 800 mm range, placing it in the large‑range category for workshop measurement where profile stiffness and repeatability are decisive. The hardened stainless steel beam with a matt‑chromed scale resists wear and ensures legible graduations throughout its service life. With a vernier system reading of 0.05 mm and a combined inch/mm vernier — 1/128" (top) and 1/20 mm (bottom) — the instrument supplies a clear analogue indication that is well suited to routine quality checks and set‑up tasks on sizeable components. This configuration supports efficient process control where quick, verifiable readings are required without the need for electronic power. Practical handling and repeatable results A finely machined fine‑adjustment wheel allows slow, controlled closing of the jaws to the actual measuring faces, reducing the risk of overshoot and improving repeatability when setting to reference sizes. The monoblock design increases transverse stiffness, which lowers deformation during measurement and contributes to consistent readings over the entire measuring length. Pointed jaws are fitted for access to narrow recesses and for locating on specific features, while the hardened surfaces maintain dimensional integrity under frequent use. These mechanical advantages translate into measurable time savings and reduced rework in production and fixturing workflows. Compliance, transport and workshop integration The caliper is produced to match the referenced guideline DIN 862 (with specified conditions for jaw length), which underpins its suitability for industrial metrology routines. Delivery includes a protective transport case, appropriate for large instruments; for items of this scale the case is primarily intended for transport protection rather than long‑term storage. Marked technical identifiers and traceable codes simplify stockkeeping and integration into workshop tool inventories. For additional technical data or calibration queries, Metav’s specialists can supply extended details and support via email or telephone to ensure the instrument fulfils the specific application requirements. Contact Metav Werkzeuge today to arrange supply of the Metav IndustryLine workshop caliper M201.338.2 and to benefit from expert advice and reliable delivery from Emmerich. Technical data Article number: M201.338.2 GTIN: 4054469101811 ECLASS: 21170344 Tariff number: 90173000 Facts Measuring range: 0–800 mm Jaw length: 300 mm Vernier readings: 1/128" (top) and 1/20 mm (bottom) Resolution / graduation: 0.05 mm Conformity note: DIN 862 (see jaw‑length conditions) Special features Material: hardened stainless steel, matt‑chromed scale Monoblock construction for increased stiffness Fine‑adjustment mechanism for controlled setting Pointed jaws for access to narrow features Protective transport case included (for transport protection) FAQ What measuring tasks is this caliper best suited to? The Metav IndustryLine Workshop Caliper M201.338.2 is intended for large‑format workshop measurements such as external, internal and step dimensions on fixtures, housings and clamping components up to 800 mm. How precise is the analogue reading on this caliper? The sliding scale provides a graduation of 0.05 mm and a dual vernier (1/128" top; 1/20 mm bottom), giving a robust analogue reading suitable for workshop tolerance checks and set‑up operations. Does the instrument meet recognised standards? Yes—the design and scale follow the conditions referenced in DIN 862, with applied requirements depending on jaw length as noted by the manufacturer. Is the caliper supplied ready for immediate use and safe for transport? The caliper is delivered in a protective transport case appropriate for large tools; the case is designed primarily for transport protection. For further handling or calibration details, Metav Werkzeuge can be contacted. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper With 400mm Jaws, 0.05mm Vernier, Fine Adjustment, Monoblock, Stainless Steel, Supplied In Case - Metav IndustryLine
Robust 800 mm measuring range, hardened stainless steel construction and a precise fine‑adjustment mechanism ensure repeatable workshop results; order the caliper directly via Metav Werkzeuge or consult our specialists for technical clarification. M201.338.3 Workshop Caliper with Pointed Jaws — 800 mm Range, Fine Adjustment (Metav IndustryLine) The M201.338.3 is a workshop caliper for large‑format components, combining a monoblock frame and fine‑adjustment for stable, repeatable measurements across long reaches. Monoblock frame for increased rigidity 800 mm measuring range for large components Fine‑adjustment thumb screw for precise positioning Hardened stainless steel with matt‑chrome scale Reliable large‑range measurement for heavy workshop tasks The 800 mm measuring range places this instrument in the large‑range caliper class, designed for components that exceed standard bench sizes. The monoblock construction increases profile stiffness, reducing bending and improving repeatability when measuring long parts. Long 400 mm jaws extend reach into deep recesses and across large assemblies while the matt‑chrome scale resists reflections and wear, aiding clear reading in workshop lighting. This combination supports efficient in‑line checks and fixture setup, reducing rework in fabrication and assembly. Controlled positioning for consistent results A dedicated fine‑adjustment mechanism allows smooth, metered closing and prevents overshoot during contact with the measured surface; this reduces user‑induced scatter and makes serial checks faster and more consistent. The caliper is fitted with pointed jaws, which are useful for accessing narrow grooves, slots or centre points on larger parts where standard jaw tips would be impractical. The overall design balances reach and usability so that longer measurements remain manageable without compromising stability. Industry‑compatible vernier and normative guidance This instrument is an analogue caliper with vernier scales set to 1/128" (top) and 1/20 mm (bottom), providing a conventional metric vernier reading equivalent to 0.05 mm resolution, suitable for robust workshop control and fittings work. The product follows DIN 862 guidance for jaw and beak geometry (beak length rules applied up to 200 mm, with larger dimensions managed according to factory norms), ensuring the tool integrates into established quality processes and measurement routines without surprise. Workshop delivery and traceable workshop performance Supplied as a workshop tool, the instrument is finished in hardened stainless steel to resist corrosion and mechanical wear in demanding environments. Delivery includes a protective transport case to safeguard the instrument during shipment and handling. As part of the Metav IndustryLine, the caliper is aimed at machine shops, toolrooms and fixture builders who require a balance of reach, robustness and straightforward mechanical operation for daily measurement tasks. For robust large‑format workshop measurement, choose the Metav IndustryLine M201.338.3—contact Metav Werkzeuge in Emmerich for application advice and reliable delivery: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M201.338.3 GTIN: 4054469101828 Category: Messschieber / Calipers Manufacturer: Metav IndustryLine Facts Measuring range: 0–800 mm Measuring range (max): 800 mm Measuring range (min): 0 mm Jaw length: 400 mm Vernier: 1/128" (top) and 1/20 mm (bottom) Tariff code: 90173000 Special features Monoblock construction Fine‑adjustment mechanism Pointed jaws for narrow features Hardened stainless steel with matt‑chrome scale Analogue vernier instrument Delivery in protective transport case Norm: DIN 862 (beak length rules; factory norm for longer beaks) FAQ What measuring range does this caliper cover? The M201.338.3 covers a measuring range from 0 to 800 mm, intended for large‑format workshop measurements. What resolution does the vernier provide? The caliper uses vernier scales of 1/128" (top) and 1/20 mm (bottom), corresponding to a metric vernier step of 0.05 mm. What materials and finish are used? Constructed from hardened stainless steel with a matt‑chrome scale finish for wear resistance and reduced glare. Are the long jaws suitable for deep or recessed measurements? Yes; the 400 mm jaw length provides extended reach into deep recesses, while the monoblock frame helps maintain stiffness over the extended span. Is a protective case included with delivery? Yes; the instrument is supplied in a transport case to protect it during shipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper With Pointed Jaws, Fine Adjustment, Hardened Stainless Steel 0.02mm Resolution, Supplied In Case - Metav IndustryLine
Benefit from the combination of long‑range reach, robust monoblock construction and precise vernier resolution to ensure reproducible measurements for large components; order the caliper directly via Metav Werkzeuge or consult the specialists if further advice is required. M201.308 Workshop Caliper with Pointed Jaws — 800 mm, 0.02 mm Vernier (Metav IndustryLine) The M201.308 Workshop Caliper is a robust, long‑beam analogue caliper designed for large‑format metalworking and workshop measurement tasks, offering fine adjustment and durable stainless‑steel construction for reliable everyday use 800 mm measuring range for large components Monoblock construction for increased rigidity Fine‑adjustment slide for precise positioning Hardened stainless steel with matt‑chrome scale External, internal and step measurement capability Long reach and measured reliability for large workpieces The 800 mm measuring range classifies this instrument in the large‑range category, making it suitable where extended span and repeatability matter. The vernier resolution of 0.02 mm provides high mechanical precision for analogue measurement tasks and supports typical workshop tolerances; when repeatable results are required over greater distances, the long beam design reduces handling error and keeps measurement variance low. This makes the caliper particularly useful in heavy‑duty metalworking, fixture inspection and the measurement of larger housings or assemblies where a standard 150–300 mm tool would be insufficient. Stiff construction and corrosion resistance for daily industrial use A monoblock frame and hardened stainless steel body combine to deliver dimensional stability and resistance to shop contamination. The matt‑chrome scale improves legibility under workshop lighting and reduces glare, while the one‑piece construction minimises play between beam and slider. These design choices reduce elastic deformation during measurement and increase the useful life of the tool, supporting continuous operation in industrial or trade environments where tools are subject to knocks and regular use. Precise positioning and practical jaw geometry A smooth fine‑adjustment slide allows micro‑positioning of the slider for accurate closing on the measured feature, which is essential when measuring deep grooves or step faces. The caliper’s jaws include extended pointed tips and a jaw length 150 mm that enable access to recesses and bores otherwise difficult to reach. The dual vernier arrangement (imperial division on top and metric division below) provides versatile reading options on a single instrument, simplifying cross‑reference tasks without digital conversion. Versatile measurement modes and workshop compatibility Designed for external, internal and step measurements, the caliper supports the four classic measuring modes of a workshop instrument. The analogue format and durable finish ensure the tool integrates well into established inspection processes and manual quality control workflows. Supplied to meet the manufacturer's standard (Werksnorm), it is a practical instrument for shops seeking a robust, no‑frills solution where mechanical reliability and simple, immediate readings remain key. For dependable large‑range measurement choose the Metav IndustryLine M201.308 and contact Metav Werkzeuge for tailored advice and supply from Emmerich. Technical Data Article number: M201.308 GTIN: 4054469101286 Manufacturer: Metav IndustryLine / Metav Werkzeuge GmbH Facts Measuring range: 0–800 mm Resolution: 0.02 mm (vernier) Jaw length: 150 mm Construction: Monoblock Special features Material: hardened stainless steel with matt‑chrome scale Measurement types: external, internal and step measurement Adjustment: fine‑adjustment slide Scale type: analogue vernier (dual divisions) Conformity: Werksnorm FAQ What is the measuring range of this caliper? The caliper has a measuring range of 0–800 mm, suitable for large components and long‑span measurements. How precise is the analogue vernier reading? The instrument provides a vernier resolution of 0.02 mm, offering high mechanical precision for analogue measurements. Is the caliper suitable for internal and step measurements? Yes, the design supports external, internal and step measurements as standard workshop functions. What material and finish does the caliper have? The body is made from hardened stainless steel with a matt‑chrome scale for improved durability and legibility. Does the caliper include fine adjustment for positioning? Yes, a fine‑adjustment slide is incorporated to enable precise slider positioning during measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper With Pointed Jaws, Fine Adjustment, Monoblock, 0.05mm Resolution, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a large 800 mm measuring range, hardened stainless steel construction and a fine-adjustment screw for robust, repeatable workshop measurements; order the M201.338.1 workshop caliper directly via Metav Werkzeuge or contact the Metav consultants for technical advice. M201.338.1 Workshop Caliper — 800 mm, monoblock, fine adjustment (Metav IndustryLine) The M201.338.1 is a workshop caliper designed for large-component measurement tasks, combining a long measuring span with a monoblock profile and precision fine adjustment for controlled contact and reproducible readings 800 mm measuring range Monoblock design for high stiffness Hardened stainless steel with matt chrome scale Fine-adjustment screw for repeatable contact Engineered for large-format workshop measurements This instrument is classified as a large-range caliper (500–1,000 mm), making it suitable where extended reach and stable guidance matter. The 800 mm span covers sizeable components encountered in heavy fabrication, fixture construction and pipe or vessel work, while the monoblock structure reduces flexing along the beam to preserve measurement consistency. The combination of range and profile stiffness aims to shorten setup times and reduce rework by delivering reliable first-pass measurements. Precise readings with clear vernier scales and adjustment The caliper uses dual vernier graduations — 1/128" Vernier on the upper edge for inch-based readings and a 1/20 mm Vernier on the lower edge for metric use — permitting a workshop-standard resolution of 0.05 mm when reading the metric scale. The integrated fine adjustment screw enables controlled closing of the jaws, which helps avoid variable hand pressure and improves repeatability compared with rapid, hand-driven finger slides. Compliance with DIN 862 for the specified jaw geometry (snabellength 200 mm) ensures the measuring faces meet recognised workshop tolerances and handling expectations. Built to take daily workshop use Critical contact surfaces and the beam are made from hardened stainless steel, finished with a matt chrome scale for durable visibility without glare. The caliper is fitted with pointed jaws that aid access into narrow grooves and features robust guidance to withstand the knocks of everyday use. Delivery includes a protective case to simplify transport and storage; the case supports safe handling of the long beam during shipping and prevents damage between uses. These design choices focus on longevity and low lifecycle cost in demanding production environments. Practical handling and application scope As a mechanical vernier caliper, the instrument supports outside, inside and step measurements using the standard jaw geometries and beam graduations; this versatility makes it a reliable workshop tool for machining, assembly and quality control. The analogue nature requires basic vernier-reading skill, but the fine-adjustment mechanism reduces measurement variability and makes repeated checks faster. Metav’s workshop-range selection emphasises accessible precision: longstanding availability from a European distribution centre keeps replenishment predictable and supports continuity at the bench or on the shop floor. For a hands-on specification review or procurement guidance, contact Metav Werkzeuge — the Metav IndustryLine 800 mm workshop caliper is available through Metav’s distribution and our consultants can advise on suitability for specific production tasks. Technical data Article number: M201.338.1 GTIN: 4054469101804 Brand: Metav IndustryLine Category: Calipers / Measuring instruments Facts Measuring range: 0–800 mm Jaw length: 200 mm Scale type: Vernier (upper 1/128", lower 1/20 mm) Beam design: Monoblock Delivery format: Supplied in case Special features Material: Hardened stainless steel Finish: Matt chrome scale Feature: Fine-adjustment screw Jaws: Pointed for narrow access Standard: DIN 862 (applicable jaw length) FAQ What measuring range does the caliper cover? The M201.338.1 workshop caliper covers a measuring span from 0 to 800 mm, designed for large-format workshop tasks and components. How accurate is the instrument for metric readings? Metric readings use the 1/20 mm vernier, corresponding to a workshop resolution of 0.05 mm; the fine-adjustment screw aids reproducible contact for repeatable results with the M201.338.1. Is the caliper suitable for inside and step measurements? Yes — the geometry of the jaws supports outside, inside and step measurements as standard functions of this analogue workshop caliper. What material and finish are used for durability? The M201.338.1 is manufactured from hardened stainless steel with a matt chrome scale to provide wear resistance and glare-free readability in the workshop. Does the delivery include protective packaging? Delivery includes a transport case to protect the long beam during handling and storage, simplifying safe movement between workstations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper Without Point Fine Adjustment Monoblock Hardened Stainless Steel Matt Chrome Scale, DIN 862 - Metav IndustryLine
Take advantage of the combination of monoblock rigidity, fine adjustment and an extended 0–800 mm measuring range to keep large‑component checks both repeatable and efficient; order directly via Metav Werkzeuge or contact our consultants for application advice. Metav IndustryLine Workshop Caliper M201.328.1 — 0–800 mm, monoblock, fine adjustment The Metav IndustryLine Workshop Caliper M201.328.1 is a robust 800 mm analogue caliper designed for heavy workshop measurement tasks, providing a stiff monoblock frame and a precise fine‑adjustment mechanism for reliable long‑range checks. Large 0–800 mm range for sizeable components Hardened stainless steel with matt‑chrome scale Fine adjustment for repeatable contact positioning Delivered in transport case for secure handling Stable measurement over long spans The monoblock construction gives the caliper exceptional stiffness, reducing bending and torsion across the full 0–800 mm range. In practice this means fewer measurement variations when assessing larger parts in machining or fixture set‑ups; the single‑piece beam keeps jaw alignment consistent and simplifies handling during repetitive checks. This model belongs to the large‑range class (500–1,000 mm), a category chosen where profile rigidity and reach are decisive for reproducible results on plates, housings and heavy components. Practical vernier readout and refined control The analogue vernier arrangement combines a top and bottom scale for intuitive readings: the top vernier is 1/128", while the lower vernier gives 1/20 mm graduations (0.05 mm), offering the familiar mechanical resolution used in many workshops. The integrated fine adjustment permits micro‑corrections of jaw position before locking, which reduces operator‑induced scatter and speeds up the alignment process. For everyday industrial use this setup yields the dependable resolution expected from mechanical calipers while avoiding battery dependence. Built for workshop use and secure transport Constructed from hardened stainless steel with a matt‑chrome scale, the caliper resists corrosion and keeps scale contrast readable under harsh lighting or oily conditions. The jaws are supplied without a pointed tip, favouring broad contact faces that tolerate heavier contact forces and particulates; a long jaw length of 200 mm supports stable engagement on larger workpieces. Compliance with DIN 862 is ensured for the specified jaw length, and the instrument is supplied in a protective case for safe transport and storage, reflecting workshop realities where tools move between benches and machines. Request tailored advice from Metav Werkzeuge in Emmerich for integration into production workflows or to clarify suitability for specific large‑component applications Technical Data Article number: M201.328.1 GTIN: 4054469101569 eClass: 21170344 Manufacturer: Metav IndustryLine Facts Measuring range: 0–800 mm Jaw length: 200 mm Resolution (vernier lower): 1/20 mm (0.05 mm) Vernier upper: 1/128" Type: Analogue vernier caliper Special features Material: hardened stainless steel with matt‑chrome scale Monoblock one‑piece beam Fine adjustment mechanism Delivered in transport case Supplied without pointed tip Norm: DIN 862 (applies for jaw length 200 mm) FAQ What measuring range does the caliper cover? The Metav IndustryLine Workshop Caliper M201.328.1 covers a measuring range of 0–800 mm, making it suitable for larger workshop components within the 500–1,000 mm class. What level of resolution and readout is provided? This analogue caliper uses a dual vernier: the lower vernier corresponds to 1/20 mm (0.05 mm) resolution while the upper vernier is 1/128", offering the mechanical graduations commonly used in industrial measurement. How does the fine adjustment improve measurement results? The fine‑adjustment mechanism allows controlled micro‑movement of the jaws before locking, reducing operator pressure variation and improving repeatability when performing serial checks with the caliper. Is the caliper corrosion resistant for workshop environments? Yes, the instrument is made from hardened stainless steel and features a matt‑chrome scale to maintain readability and resist surface corrosion in typical workshop conditions. Does the caliper come protected for transport? The caliper is supplied in a transport case to protect the instrument during storage and movement between workstations Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper Without Probe Fine Adjustment Monoblock Stainless Steel 400mm Jaws 0.05mm Resolution DIN 862 - Metav IndustryLine
Take advantage of a sturdy monoblock design, broad 800 mm measuring range and precise fine adjustment to keep large workshop measurements reproducible and efficient. Order the caliper directly via Metav Werkzeuge or consult our specialists for application-specific advice. Workshop Caliper M201.328.3 — 0–800 mm monoblock stainless steel with fine adjustment (Metav IndustryLine) A Workshop Caliper M201.328.3 engineered for robust, large‑format measurement tasks in workshops and fixture construction, combining a wide 0–800 mm range with a controlled fine‑adjustment mechanism for repeatable results 800 mm measuring range Monoblock stainless steel construction Fine adjustment for controlled positioning Vernier for mm and inch reading Built for reliable large‑format measurement The caliper’s monoblock construction delivers higher torsional rigidity than split‑beam designs, which reduces deflection during repetitive measurements and helps maintain reproducibility across long series. With an 800 mm measuring range and a 400 mm jaw length, this instrument covers the typical needs of heavy workshop tasks such as fixture, mould and medium‑sized housing inspection. The combination of range and stiffness shortens set‑up time and reduces the need for repeated checks, supporting a smoother production flow. Industrial standard accuracy made easy to read Equipped with a dual vernier, the bottom scale is graduated as 1/20 mm (equivalent to 0.05 mm), while the top vernier provides inch reading at 1/128". This configuration corresponds to the industrial standard for analogue calipers and enables clear cross‑reference between metric and imperial workflows. The vernier scale requires no electronics, which simplifies maintenance and ensures immediate availability on the workshop floor; users benefit from fast visual comparison and a measurable error band that sits within common DIN guidelines for mechanical calipers. Robust materials and a worked finish for daily use Manufactured from hardened stainless steel with a matt‑chromed scale, the instrument resists corrosion and keeps scale markings legible under workshop conditions. The fine‑adjustment screw provides controlled traverse of the slider for careful positioning when setting jaws on critical edges, reducing measurement scatter due to hand pressure. The caliper is supplied in a transport case (plastic or wooden as required for safe shipping); for larger tools the wooden variant is intended primarily for transport rather than daily storage. Standards conformity and workshop integration The product meets established norm references: DIN 862 applies for jaw lengths up to 200 mm; for larger jaw lengths the instrument is supplied according to factory standard to maintain the required stability for long jaws — in this case the 400 mm jaw length is produced to the manufacturer’s specification. This makes the caliper suitable for integration into workshop quality routines where consistency and traceability are important. If system compatibility or fixture‑level tolerances need discussion, Metav Werkzeuge can advise on adapting measurement procedures to existing quality workflows. For robust large‑format measurement rely on the Metav IndustryLine workshop caliper — contact Metav Werkzeuge for application guidance and supply direct from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M201.328.3 GTIN: 4054469101583 Manufacturer: Metav IndustryLine Facts Measuring range: 0–800 mm Jaw length: 400 mm Vernier: 1/20 mm (0.05 mm) and 1/128" Category: Caliper (large range) Tariff code: 90173000 Special features Material: hardened stainless steel, matt‑chromed scale Design: monoblock construction Adjustment: fine adjustment screw Type: analogue vernier caliper Delivery: transport case (plastic or wooden as appropriate) Norms: DIN 862 (up to 200 mm jaw length), factory norm for larger jaws FAQ How accurate is the measurement with this caliper? The caliper achieves vernier resolution of 1/20 mm, equivalent to 0.05 mm, which aligns with the typical industrial standard for analogue calipers and is suitable for workshop quality control with clearly reproducible results. Is this instrument suitable for large workshop components? Yes. The Workshop Caliper M201.328.3 is a large‑range caliper (0–800 mm) with a 400 mm jaw length and a monoblock design, intended for robust measurement tasks in fixture, mould and general workshop use. What material and finish does the caliper have? The caliper is made from hardened stainless steel and features a matt‑chromed scale, offering corrosion resistance and long‑term legibility of graduations. How is the caliper delivered for transport? This caliper is supplied in a transport case — plastic or wooden depending on shipping requirements — with larger wooden cases used primarily to protect the instrument during transport. Does the caliper comply with recognised standards? The instrument follows DIN 862 for jaw lengths up to 200 mm; for the 400 mm jaw length of this model, production follows the manufacturer’s factory standard to ensure rigidity and repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper Without Probe Fine Adjustment, Hardened Stainless Steel, 0.02mm Resolution - Metav IndustryLine
Take advantage of the 800 mm measuring range, the 0.02 mm graduation and the robust monoblock stainless construction to measure large components reliably; order directly via Metav Werkzeuge or ask the Metav consultants for application advice. M201.318 Workshop Caliper — 800 mm range, 0.02 mm graduation, Metav IndustryLine The M201.318 workshop caliper without tip is a large-format vernier caliper developed for heavy-duty workshop measurement of assemblies, fixtures and large housings, offering a precise analogue scale and fine-adjustment for controlled positioning. 800 mm measuring range for large components Hardened stainless steel with matt-chrome scale Fine-adjustment screw for precise positioning Designed for outside, inside and step measuring Engineered for large-format workshop measurement The long measuring span and monoblock construction make this caliper a practical choice where reach and stiffness matter. With an 800 mm range, the instrument belongs to the class for large components and long bars, which keeps deflection low across the measuring length. The large format supports efficient inspection of welded frames, housings and bulky parts while preserving a usable degree of stiffness for repeatable results. Analogue vernier for decisive, reliable readings A classic vernier scale remains a dependable solution in many workshops: the lower vernier provides a 0.02 mm graduation for industrial work, while the dual-scale layout gives clear comparison between metric and imperial increments. The fine-adjustment screw enables careful closure of the jaws before taking a reading, reducing operator-induced error and speeding up repetitive measurements without compromising accuracy. Robust materials and finishing for everyday use Constructed from hardened stainless steel with a matt-chrome scale, the caliper resists corrosion and maintains legibility under workshop conditions. The hardened surfaces stand up to mechanical wear, and the matt finish reduces distracting reflections in bright production lighting. The solid construction supports durability in a busy environment and lowers the need for frequent replacements. Practical handling that supports workshop workflow The instrument is configured for outside, inside and step measuring, covering the four core measuring tasks commonly required on the shop floor. The absence of a pointed tip simplifies contact with flat faces and delicate surfaces, while the jaw geometry and 150 mm jaw length enable access to deeper pockets and recesses. As an analogue tool, it is straightforward to integrate into existing inspection routines and does not rely on batteries or electronics. For tailored advice on integrating the M201.318 caliper into production or for direct supply from Emmerich, contact Metav Werkzeuge GmbH by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav consultants will recommend the right configuration for the task. Technical data Article number: M201.318 GTIN: 4054469101378 ECLASS: 21170344 Tariff number: 90173000 Facts Measuring range: 0–800 mm Resolution / Graduation: 0.02 mm Jaw length: 150 mm Scale type: analogue vernier Special features Hardened stainless steel with matt-chrome scale Monoblock construction Fine-adjustment screw Suitable for outside, inside and step measuring Werksnorm (factory standard) FAQ What measuring tasks can this caliper perform? The M201.318 workshop caliper handles outside, inside and step measuring; its jaw geometry and long range make it suitable for large-format workshop tasks. Is the scale metric or imperial? The vernier layout on the instrument provides metric graduation (0.02 mm) alongside an imperial scale reference for cross-checking. How does the fine-adjustment improve measurement? The integrated fine-adjustment screw enables controlled, smooth jaw movement for repeatable positioning and reduced operator influence during reading. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper Without Tip 0.05mm, 300mm Jaw, Fine Adjustment, Monoblock, Stainless Hardened Chrome Scale, in Case - Metav IndustryLine
Take advantage of robust long‑range measurement, corrosion‑resistant construction and precise fine adjustment for dependable workshop performance; order the caliper directly via Metav Werkzeuge or ask the consultants for application advice. M201.328.2 — Workshop vernier caliper, 0–800 mm, stainless, fine adjustment (Metav IndustryLine) M201.328.2 is a workshop vernier caliper engineered for long‑reach external, internal and step measurements in heavy‑duty machine‑shop environments. 0–800 mm measuring range for large components Hardened stainless steel with matt‑chromed scale Fine‑adjustment spindle for precise positioning Monoblock design for increased rigidity Accurate long‑reach measurement for heavy assemblies Designed as a large‑range (500–1,000 mm) caliper, this instrument provides a practical balance between reach and stiffness, making it suitable for larger fixtures, housings and machining set‑ups. The 0–800 mm measuring span and extended jaw length of 300 mm enable access into deep bores and across wide faces without multiple gauge changes, reducing cycle time and handling. The mechanical Vernier is configured for a reading step of 0.05 mm, aligning with industrial workshop practice for repeatable checks and quick visual verification. Robust construction that withstands workshop demands The frame and measuring faces are made from hardened stainless steel, finished with a matt‑chromed scale to resist corrosion and minimise glare under workshop lighting. The monoblock construction increases profile rigidity across the full bar length, which improves reproducibility of measurements on heavy components; the tool’s mass (approx. 8.5 kg) reflects the substantial build and should be considered when planning handling or storage. A fine‑adjustment spindle permits micro‑positioning of the slider for confident setting of measurement points and comparison checks. Standards, handling and usability in daily inspection routines Calibration and traceability follow the specified norm: conformity to DIN 862 is provided for shorter jaw variants, while calipers with larger spans are produced to the manufacturer’s factory standard, ensuring consistent quality across sizes. The dual vernier arrangement (upper scale 1/128‑inch, lower scale 1/20 mm) supports mixed‑unit reading where imperial and metric references coexist in workshop documentation. The overall layout prioritises quick manual use and clear scale reading, making the instrument effective for routine production checks and first‑article inspections. For reliable large‑range measurement capacity and workshop durability, contact Metav Werkzeuge to discuss how the M201.328.2 fits specific applications and to arrange procurement through Metav Werkzeuge. Technical data Article number: M201.328.2 GTIN: 4054469101576 Category: Messschieber / Caliper Facts Measuring range: 0–800 mm Jaw length: 300 mm Resolution: 0.05 mm (vernier) Weight: 8.5 kg Measuring system: Analog vernier (mechanical) Special features Hardened stainless steel construction Matt‑chromed scale for improved legibility Fine‑adjustment spindle for precise setting Monoblock design for increased rigidity Conforms to DIN 862 for smaller jaws; larger spans to factory standard FAQ What measurement range does this caliper cover? The M201.328.2 covers a measuring range of 0–800 mm, designed for large‑component checks in workshop and production environments. Is the scale corrosion‑resistant for shop use? Yes, the M201.328.2 is made from hardened stainless steel with a matt‑chromed scale to withstand workshop conditions and maintain legibility. How precise is the reading on this analogue caliper? The vernier arrangement provides a reading step of 0.05 mm, a standard industrial resolution for mechanical calipers used in routine inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Precision Caliper With Pointed Jaws, Fine Adjustment, Monoblock, 0.05mm Resolution, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of hardened stainless-steel construction, an 800 mm measuring range and a fine-adjustment spindle for dependable, repeatable measurements in heavy workshop environments; order the caliper directly via Metav Werkzeuge or consult the technical team for specification support. Workshop caliper with pointed jaws — Monoblock, 800 mm measuring range, 0.05 mm resolution (Metav IndustryLine) The Workshop caliper with pointed jaws is a robust analogue measuring instrument designed for large-format component measurement in industrial workshops and toolrooms. Hardened stainless-steel construction 800 mm measuring range Fine-adjustment spindle for precise setting Supplied in a protective transport case Large-range accuracy for heavy-duty workshop tasks With a measuring range of 800 mm, this instrument is classified among large-format calipers, intended for long-beam measurement tasks such as frame components, housings and larger fixtures. The combination of a long reach and a monoblock design reduces torsion and bending over the beam, supporting stable repeatability when measuring extended parts. The analogue vernier layout with a 0.05 mm increment aligns with common workshop tolerances and provides a clear, mechanical reference that is easy to read under varied lighting conditions. Durable construction and precise adjustment for consistent results The caliper is manufactured from hardened stainless steel with a matt-chromed scale, giving corrosion resistance and a low-reflectance surface for improved legibility. A fine-adjustment spindle enables accurate approach and locking of the jaws, turning coarse positioning into controlled measurement steps; this reduces user-induced error during clamping. The instrument features pointed jaws for access to small grooves or narrow seats and a monoblock jaw assembly to maintain parallelism and robustness across repeated use. The vernier specification is provided as 1/128" (top) and 1/20 mm (bottom), offering a dual-scale reference for workshops that still use imperial readings alongside metric. Practical workshop logistics and standards compliance Designed for routine industrial use, the caliper is supplied in a protective transport case, facilitating safe storage and transport between workstations. The analogue system is straightforward to maintain and does not require batteries, which simplifies long-term operation in busy production environments. Where applicable, jaw-length and manufacturing tolerances follow DIN 862 conventions for shorter jaw lengths; for larger jaw configurations, factory standards apply to ensure structural integrity. The robust build and clear scale mean the instrument performs best where coarse-to-medium precision is sufficient across large parts, striking a balance between reach and ease of handling. For large-component measurement tasks, choose the Metav IndustryLine workshop caliper — contact Metav Werkzeuge in Emmerich for ordering details or to request further technical specifications. Technical data Article number: M201.338 GTIN: 4054469101798 eClass: 21170344 Facts Measuring range: 0–800 mm Jaw length: 150 mm Resolution: 0.05 mm Nonius/vernier: 1/128" (top) and 1/20 mm (bottom) Customs tariff number: 90173000 Special features Material: hardened stainless steel with matt-chromed scale Monoblock construction Fine-adjustment spindle Pointed jaws for narrow features Supplied in a protective transport case Analogue vernier instrument Conforms to DIN 862 for specified jaw lengths FAQ What measuring range does this caliper cover? The workshop caliper covers a measuring range from 0 to 800 mm, making it suitable for large-format components and long-beam measurements. What level of resolution and precision is provided? The instrument provides a resolution of 0.05 mm via an analogue vernier, matching common workshop tolerances for machining and assembly tasks. Which materials and finishes are used in the caliper's construction? The caliper is made from hardened stainless steel and features a matt-chromed scale for corrosion resistance and reduced glare. Is the caliper supplied with a protective case? Yes, the caliper is delivered in a protective transport case to facilitate safe handling and storage. Does the instrument comply with any standards? Jaw lengths and dimensional tolerances follow DIN 862 for the specified shorter jaw lengths; larger jaw configurations are manufactured to the supplier's factory standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Brass Precision Caliper 1mm Graduation, Analog - Metav IndustryLine
Benefit from the compact 0–80 mm measuring range, corrosion‑resistant brass construction and a clear 1 mm graduation for fast routine checks; these attributes make the tool ideal for quick verification tasks on the shop floor. Order the caliper directly via Metav Werkzeuge or ask our consultants if needed. Brass Vernier Caliper M201.113 — 0–80 mm, 1 mm graduation (Metav IndustryLine) The Brass Vernier Caliper M201.113 is a compact analogue caliper designed for straightforward workshop checks and small‑part measurements. Brass construction for corrosion resistance Compact 0–80 mm measuring range Easy‑reading 1 mm graduation scale Light‑weight 0.2 kg for portable use Compact design that speeds up routine checks The compact, low‑mass construction and the 0–80 mm measuring span make this instrument well suited to rapid, on‑the‑spot inspection of small components. Its brass body offers inherent corrosion resistance, reducing the need for frequent surface care and ensuring that basic dimensional checks remain reliable even in busy workshop environments. The short, rigid jaws limit torsion during handling, which supports consistent contact and repeatable readings when assessing simple features on small parts. Clear scale and simple handling for efficient measurements Equipped with a coarse 1 mm graduation on a vernier layout, the instrument prioritises speed and legibility over fine resolution. This makes it appropriate for applications where approximate dimensions or quick pass/fail checks are required rather than sub‑millimetre precision. The analogue display avoids battery dependency and allows immediate interpretation of measurements; the simple scale layout reduces training time for staff who perform frequent, routine checks rather than precision metrology. Robust, low‑maintenance choice for everyday workshop use Built from brass and weighing approximately 0.2 kg, the caliper is easy to carry and store, and its robust material choice resists wear in standard workshop atmospheres. The design supports frequent handling and quick assessments without the fragility of more delicate gauge instruments. For tasks that demand higher resolution or traceable laboratory calibration, alternative models with finer graduation or digital readouts may be more appropriate; for general workshop verification and maintenance use, this caliper offers a pragmatic balance of toughness and simplicity. For fast, reliable routine measurements choose the Metav IndustryLine brass caliper and contact Metav Werkzeuge for tailored advice and prompt dispatch from Emmerich Technical data Article number: M201.113 GTIN: 4054469151861 SKU: M201.113 eClass: 21170344 Facts Measuring range: 0–80 mm Maximum measuring range (mm): 80 Weight: 0.2 kg Tariff number: 90173000 Special features Material: Brass Analogue vernier display Label: Messing‑Messschieber 80x1mm Ablesung 1 mm Category: Calipers FAQ What measurement range does this caliper cover? The caliper covers a measuring range of 0–80 mm, making it suitable for compact components and routine verification tasks. How fine is the graduation on the scale? The instrument features a 1 mm graduation on an analogue vernier, intended for quick checks rather than fine micrometric measurement. Is the caliper suitable for use in a workshop environment? Yes, the brass construction and lightweight design make the caliper appropriate for everyday workshop use and portable inspections. Does this caliper require batteries or electronics? No, the caliper is an analogue vernier instrument and operates without batteries, providing immediate readings without electronic dependency. Which Metav product line supplies this caliper? This model is supplied under the Metav IndustryLine label, SKU M201.113, intended as a practical, entry‑level measurement tool for routine tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Depth Gauge With Pin Tip 0.02mm Nonius, Stainless Steel, Matt Chrome Scale, DIN 862 - Metav IndustryLine
The compact depth gauge combines 0.02 mm vernier resolution, a stainless steel construction and DIN 862 conformity for reproducible depth measurements in confined assemblies; order the item directly via Metav Werkzeuge or contact our consultants for application advice. Metav IndustryLine Depth Gauge with Pin Tip M204.070 — 80 mm range, 0.02 mm vernier Depth Gauge with Pin Tip (M204.070) for compact, high-precision depth measurement in fine mechanical and workshop environments. 0.02 mm vernier resolution Stainless steel body, matt‑chrome scale Compact 80 mm measuring range DIN 862 standard compliance Precision where it matters The instrument delivers a vernier resolution of 0.02 mm, positioning it among the most precise mechanical depth gauges for analogue use. The bottom vernier (1/50 mm) facilitates exact readings without reliance on electronics, making the tool particularly useful where repeatable, low-maintenance measurement is required. Conformity to DIN 862 ensures the measurement procedure and scale layout meet recognised workshop standards, providing a clear basis for quality control and process documentation. Compact design for small components With a measuring range of 0–80 mm, this gauge falls into the micro category for instruments intended for fine mechanical work. Its short span and balanced proportions reduce bending and handling errors when measuring small housings, recesses or precision components. The pin tip option enables access into narrow bores and step depths where standard blades cannot reach, improving flexibility in assembly and repair tasks. Clear scale and durable finish Manufactured from stainless steel with a matt‑chrome plated scale and vernier, the gauge resists corrosion and reduces surface glare for easier reading under workshop lighting. The analogue scale is intuitive to interpret and requires no batteries or calibration electronics for everyday use. The robust finish and compact mass provide a long service life under routine shopfloor conditions while maintaining readable graduations over time. A dependable workshop companion This depth gauge is a practical choice for machine shops, toolrooms and precision repair benches that prioritise reliable mechanical measurement. The simple mechanical design minimises downtime and service requirements while delivering precision results; the gauge is light enough for handheld use yet rigid enough for consistent measurements. Metav’s positioning as a precision partner adds a further layer of supply reliability and product support for industrial users. For tailored advice or to place an order for this Metav IndustryLine depth gauge (M204.070), contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our team will advise on suitability for specific applications Technical data Article number: M204.070 GTIN: 4054469164045 Manufacturer: Metav IndustryLine Facts Measuring range: 0–80 mm Resolution: 0.02 mm (1/50 mm vernier) Weight: 0.09 kg Standard: DIN 862 Special features Material: stainless steel, scale and vernier matt‑chrome plated Version: depth gauge with pin tip Type: analogue vernier instrument FAQ How accurate is the depth gauge? The Depth Gauge with Pin Tip (M204.070) provides a vernier resolution of 0.02 mm, representing the highest mechanical precision for analogue calipers and suitable for fine workshop measurement. What is the intended measuring range and typical use? The instrument covers 0–80 mm and is classified for micro tasks; typical applications include measuring recesses, bore depths and steps in small components and precision assemblies. Does the gauge require batteries or electronics? This is an analogue vernier gauge and operates without batteries or electronic components; readings are taken from the bottom vernier (1/50 mm) and recorded manually. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Depth Gauge With Pin Tip 0.05mm Nonius, Stainless Steel, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of a compact, corrosion-resistant stainless steel construction combined with a precise 0.05 mm vernier for repeatable depth measurements in tight spaces; the tool complies with DIN 862 and is supplied ready for transport in a protective case. Order the depth gauge directly via Metav Werkzeuge or ask our consultants if needed. Depth Gauge with Pin Tip M204.060 — 80 mm range, 0.05 mm vernier (Metav IndustryLine) The Depth Gauge with Pin Tip M204.060 is a compact analogue depth gauge designed for accurate internal depth measurement in narrow bores, recesses and precision components. Stainless steel construction DIN 862 compliant vernier gauge 0.05 mm vernier resolution Supplied in protective transport case Reliable precision for fine components The instrument is built as a micro-range measuring tool (measurement range up to 100 mm), making it especially suitable for fine mechanical tasks where short, rigid members reduce flex and increase reproducibility. The analogue vernier provides a clear 0.05 mm graduation (nonius 1/20 mm), offering an industrially recognised resolution without reliance on electronics. Compliance with DIN 862 ensures the gauge meets established workshop tolerances and can be integrated into routine inspection procedures for small assemblies, toolmaking and maintenance checks. Robust design for daily workshop use Crafted from stainless steel with a matt‑chrome scale and vernier, the device resists corrosion and retains legible graduations under regular handling. The pin tip is machined to enter narrow bores and reach recessed faces while the compact bridge gives stable seating on the reference plane. Delivered in a protective case for transport, the gauge combines low maintenance with serviceable durability, reducing downtime and ensuring consistent measurement performance across repeated cycles. Practical operation and clear readout As an analogue depth gauge, the unit requires no batteries and is straightforward to operate: rest the bridge on the datum, extend the pin tip to the bottom of the feature and read the vernier against the main scale. The simple vernier system is easy to interpret for trained workshop staff and provides a reliable alternative where electronic devices are impractical. The tool suits machinists, quality technicians and service engineers who value a compact, maintenance‑light instrument for spot checks and routine depth inspections. For advice on integrating the Metav IndustryLine depth gauge M204.060 into inspection routines or workshop kits, contact Metav Werkzeuge for tailored guidance and delivery options Technical data SKU: M204.060 GTIN: 4054469102672 Manufacturer: Metav IndustryLine Norm: DIN 862 Facts Measuring range: 0–80 mm Bridge: 50 mm Resolution (vernier): 0.05 mm Weight: 0.09 kg Special features Stainless steel construction Scale and vernier matt chrome-plated Analogue vernier instrument Pin-tip for narrow bores Supplied in protective plastic or wooden transport case FAQ What measurement accuracy can be expected from this depth gauge? The depth gauge delivers a vernier resolution of 0.05 mm; its analogue design and DIN 862 conformity provide the repeatability expected for standard workshop inspection tasks. Is the gauge suitable for very small bores and recessed features? Yes. The pin‑tip configuration of the Metav IndustryLine depth gauge M204.060 is specifically intended to reach into narrow bores and recesses, enabling precise depth readings where flat probes cannot access. Does the instrument require batteries or digital calibration? No. The unit is an analogue vernier depth gauge and operates without batteries. Calibration certificates are not included by default unless explicitly stated in the product labelling. How is the depth gauge protected during transport? The tool is supplied in a protective transport case (plastic or wooden, depending on configuration) to safeguard the measuring faces and vernier during shipping and storage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Depth Gauge With Removable Probe 0.05mm Vernier, Stainless Steel, DIN 862 - Metav IndustryLine
Take advantage of a compact, workshop-ready depth gauge that combines stainless steel construction, a vernier resolution of 0.05 mm, and an interchangeable pin tip for versatile depth measurement; order the device directly via Metav Werkzeuge or consult our specialists for application guidance. M204.066 – Depth gauge (0–80 mm), stainless steel, DIN 862 by Metav IndustryLine The M204.066 is a stainless steel depth gauge with an interchangeable pin tip, designed for precise depth measurements in fine mechanical and general workshop applications up to 0–80 mm. Stainless steel with matt chrome scale Interchangeable pin tip for versatile depths Nonius 1/20 mm for 0.05 mm resolution Supplied in protective case Reliable, measurable precision for daily workshop tasks The mechanical vernier design delivers a 0.05 mm reading step, indicated by the Nonius (1/20 mm) system, making the instrument suitable where consistent, reproducible depth readings are required. The vernier mechanism converts fine adjustments into a clear, repeatable scale reading; this analogue arrangement is robust against electromagnetic interference and requires no batteries, which reduces downtime and maintenance complexity. The design supports routine inspection and set-up work where traceable, simple measurements are preferred over digital overlays. Robust construction that stands up to workshop use Constructed from stainless steel with a matt chrome scale and vernier, the gauge complies with DIN 862, ensuring dimensional reliability and interchangeability across standardised measuring tools. The corrosion-resistant material and plated scale preserve legibility and functional life in busy shop environments, while the compact build minimises flex and improves handling for single-handed operation. This combination of materials and standard conformity sustains long-term performance and reduces the need for frequent replacements. Versatility through the interchangeable pin tip and measured reach Equipped with an interchangeable pin tip, the instrument adapts quickly to varying depth profiles and blind features that are otherwise difficult to reach. The detachable measuring rod allows modification of the contact geometry without changing the whole tool, so different countersink depths or stepped features can be measured with the same instrument. The practical layout expedites measurement sequences and keeps tool inventory lean while maintaining measurement integrity. Compact format tailored to fine and detailed measurement work With a maximum range of 0–80 mm, this device falls into the Micro class of measuring instruments, where compactness and stiffness are prioritised for fine mechanical tasks. The small footprint makes it ideal for clock and instrument makers, prototype shops and precision assembly stations where short-range depth checks are frequent. The compact dimensions combine reach and rigidity, ensuring that short-span repeatability remains high even when access is limited. Contact Metav Werkzeuge in Emmerich for delivery and technical advice on the M204.066 depth gauge: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M204.066 GTIN: 4054469164144 Category: Calipers / Depth gauge Standard: DIN 862 Facts Measuring range: 0–80 mm Resolution (vernier): 0.05 mm Vernier type: 1/20 mm (bottom) Analog instrument (mechanical vernier) Special features Material: stainless steel with matt chrome scale and vernier Interchangeable pin tip and removable measuring rod Supplied in protective case for transport Suitable for compact, fine‑mechanical and workshop inspection tasks FAQ What measuring range does the gauge cover? The measuring range is 0–80 mm, making the instrument suitable for short‑to‑medium depth tasks typical of workshop and fine‑mechanical work. What reading resolution and vernier type are provided? The vernier is a 1/20 mm type, corresponding to a reading step of 0.05 mm, which is typical for analogue instruments in industrial use. Is the instrument corrosion resistant? Yes, the body and scale are made from stainless steel with a matt chrome finish that protects the scale and vernier against workshop conditions. Can the tip be adapted to different measurement tasks? The interchangeable pin tip and removable measuring rod allow quick adaptation for blind holes, stepped depths and special contact geometries without replacing the whole instrument. Does the product conform to industry standards? The tool is manufactured in accordance with DIN 862, ensuring consistency with standard workshop measuring equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Precision Caliper With Pointed Beak, 0.1mm Vernier, Monoblock Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of a compact 0–80 mm measuring range, a pointed beak for access to tight geometries and a robust stainless steel monoblock design that keeps repeatability high in small-part inspection. Order the caliper directly via Metav Werkzeuge or ask our consultants if additional specifications are required. Caliper with pointed beak for dental technicians M201.002 — 0–80 mm, 0.1 mm analogue vernier Caliper with pointed beak for dental technicians M201.002 is an analogue vernier instrument designed for precise internal and external measurements in small-format dental and laboratory work. Pointed-beak design for precise access Compact 0–80 mm measuring range 0.1 mm analogue resolution Monoblock stainless steel construction Precise measuring where space is limited The pointed beak tip lets the instrument reach narrow or recessed features that standard jaws cannot, making the tool particularly suitable for dental components and miniature parts. Built as an analogue vernier caliper, the instrument offers a clear 0.1 mm reading which provides straightforward, repeatable results for everyday workshop control. The compact measuring span of 0–80 mm places this instrument in the micro class of calipers, combining reach and rigidity for measurements on crowns, small fixtures and precise laboratory assemblies. Robust construction for reliable workshop use A single-piece monoblock frame with stainless steel construction reduces flex and improves stability across repeated measurements. The material choice resists routine corrosion and supports a long service life even in humid lab environments. Because the instrument is analogue, maintenance is simple: occasional cleaning and lubrication of the slide keep the scale readable and the vernier action smooth, supporting consistent measurement processes without complex electronics. Practical benefits for dental and lab workflows The short, narrow jaws reduce the need for part manipulation and speed up inspection cycles, which benefits throughput in small-batch production or laboratory contexts. The mechanical design also means immediate readiness without battery dependence, ensuring the instrument is available at every shift change. This translates into measurable time savings and a lower total cost of ownership for routine dimensional checks of small components. What the specifications mean in practice The vernier reading of 0.1 mm offers clear, unambiguous values for many workshop tolerances and fits common inspection routines. The micro-range classification emphasises that the instrument is optimised for fine, short-span measurements rather than large assemblies. For applications requiring sub-0.1 mm resolution, higher-precision or digital devices should be considered; for robust, repeatable checking of dental parts, this caliper balances practicality and control effectively. The labelled design and dental orientation make handling and identification straightforward in busy lab settings. For laboratory or dental shops seeking a compact, durable measuring instrument, contact Metav Werkzeuge for the Metav IndustryLine caliper M201.002 with pointed beak — expert advice and supply from Emmerich is available to match the tool to the application. Technical data Article number: M201.002 GTIN: 4054469100043 EClass: 21170344 Tariff number: 90173000 Facts Measuring range: 0–80 mm Resolution: 0.1 mm Weight: 0.02 kg Type: Analogue vernier caliper Special features Material: stainless steel (inox) Monoblock single-piece frame Pointed-beak jaws for narrow geometries Intended for dental and small-part measurements FAQ What accuracy can be expected from this caliper? The caliper offers a 0.1 mm vernier reading; the instrument provides reliable repeatability for standard workshop tolerances typical in dental and laboratory checking with the Metav IndustryLine caliper M201.002. Is the caliper suitable for dental component measurement? Yes. The pointed-beak geometry and the compact 0–80 mm span make the instrument well suited to inspect crowns, small fixtures and related dental parts with practical handling in lab conditions. Which measurement types are possible with this instrument? The tool supports internal and external measurements consistent with its design as an analogue vernier caliper; narrow-jaw access is a particular advantage for confined features. What material is the caliper made from and how durable is it? Constructed from stainless steel, the caliper combines corrosion resistance with mechanical stiffness, giving the Metav IndustryLine M201.002 long-term durability for routine workshop use. Does the M201.002 require batteries or electronic maintenance? No. As an analogue instrument, the caliper operates mechanically and needs only basic cleaning and occasional lubrication to maintain smooth slide action and legible readings. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Hier wird noch anderes html hinkommen um das wir uns später kümmern