messschieber beschriftung
Das hier ist der erste PLatzhalter
500mm Depth Gauge 0.02mm Resolution Stainless Steel Matt Chrome Scale DIN 862 In Case - Metav IndustryLine
Take advantage of the combination of robust stainless-steel construction, 0.02 mm vernier resolution, and a secure locking screw to ensure repeatable, medium-range depth measurements for workshop and toolroom tasks. Order the depth gauge directly via Metav Werkzeuge or consult our advisors for application support. Depth Gauge M204.043 — 500 mm stainless steel, 0.02 mm vernier (Metav IndustryLine) The Depth Gauge M204.043 is a precision analogue depth gauge designed for medium-range measurement tasks in machine shops, jig and fixture assembly, and mould making. It combines a long measuring span with a fine 0.02 mm vernier for precise depth determination under demanding workshop conditions. Stainless steel construction for corrosion resistance Vernier resolution 0.02 mm (1/50 mm) Locking screw for repeatable depth measurements Precise medium-range measurement that fits the workshop This instrument offers a 0–500 mm measuring range classified as a medium‑range tool, which balances reach and rigidity for everyday tasks. Conforming to DIN 862, the analogue vernier with 0.02 mm graduation belongs to the highest mechanical precision class for nonius gauges, making it suitable where reliable, repeatable depth readings are required without the complexity of electronic systems. The long span supports measurements on larger components while remaining manageable for single‑person operation. Durable design for reproducible results Constructed from stainless steel with a matt‑chrome scale and vernier, the gauge resists workshop corrosion and keeps graduations readable over time. A dedicated locking screw secures the slider to prevent drift during transfer of measurements, improving reproducibility in repetitive inspection routines. The instrument is supplied in a protective transport case to reduce handling damage during storage and transit, supporting a dependable service life in industrial environments. Practical integration into quality routines The analogue reading principle eliminates battery dependency and simplifies routine checks on the shop floor, while the vernier resolution of 0.02 mm provides the fineness needed for precision assemblies. For quality control, the gauge is a cost‑effective, low‑maintenance option that integrates easily into inspection benches and toolrooms. The clear mechanical scale and robust construction make it a pragmatic choice for daily use in production, maintenance and inspection tasks. Handling, reading and care made straightforward Reading the nonius requires aligning the vernier markings with the main scale; this method provides a reliable sub‑division down to 0.02 mm without electronics. Routine care involves keeping the measuring surfaces clean and lightly oiled, and protecting the scale from hard impacts. The solid build and matt‑chrome finish reduce glare and support fast, accurate readings in varied lighting. For specific applications or measurement tips, the Metav team can advise on best practice and complementary tools. For reliable medium-range depth measurement choose the Metav IndustryLine depth gauge and contact Metav Werkzeuge for tailored advice and rapid supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M204.043 GTIN: 4054469164021 Manufacturer: Metav IndustryLine Standard: DIN 862 Type: Analogue vernier depth gauge Facts Measuring range: 0–500 mm Bridge length: 150 mm Resolution (nonius): 0.02 mm (1/50 mm) eCl@ss: 21170349 Tariff number: 90173000 Special features Material: stainless steel; scale and vernier matt chrome-plated Locking screw included Delivered in protective case for transport Analogue reading (nonius) FAQ How precise is the reading on this depth gauge? The depth gauge provides a vernier resolution of 0.02 mm (1/50 mm), which places it in the highest mechanical precision category for analogue instruments under DIN 862. Is the instrument suitable for routine shop‑floor inspections? Yes. The stainless steel construction, matt‑chrome scale and locking screw make the gauge robust and repeatable for daily inspection and measurement tasks. What measuring range does the instrument cover? The gauge covers 0–500 mm, classified as a medium‑range tool ideal for machine‑shop and fixture measurements. Does the gauge come with a calibration certificate? The product is supplied as a standard workshop instrument conforming to DIN 862; if a specific calibration certificate is required, please contact Metav Werkzeuge to arrange calibration services. Is the depth gauge delivered ready for transport and storage? Yes. The instrument is supplied in a protective case suitable for transport to reduce risk of damage during handling and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Depth Gauge 0.05mm Nonius Stainless Steel Matt Chrome Scale, DIN 862 - Metav IndustryLine
Take advantage of a stainless-steel build, 0–500 mm measuring range and a 0.05 mm vernier resolution for reliable depth measurement in medium-sized workshop tasks; order directly via Metav Werkzeuge or ask the consultants for tailored advice. Depth Gauge M204.094 — 500 mm vernier depth gauge, stainless steel, DIN 862 (Metav IndustryLine) The Depth Gauge M204.094 is a vernier-style depth gauge designed for precise depth checks in mechanical and metalworking environments, combining a 0–500 mm measuring range with robust stainless-steel construction. 0–500 mm measuring range with 250 mm bridge Vernier resolution 0.05 mm (1/20 mm) Stainless-steel construction, matt chrome-plated scale Locking screw for repeatable positioning Precision that supports daily production The instrument provides a 0–500 mm measuring range with a vernier resolution of 0.05 mm, compliant with DIN 862, making it suitable as a medium-range caliper for workshop and toolroom tasks. This level of mechanical accuracy corresponds to the industry standard for general engineering checks and offers a clear, reproducible basis for quality control. The analogue vernier allows readings without batteries, reducing downtime and ensuring measurements remain possible in any setting. Robust build for repeated use Constructed from stainless steel with the scale and vernier matt-chrome plated, the gauge resists corrosion and holds up to routine workshop handling. The integrated locking screw secures the slide for repeatable measurements and simple transfer of values. These features reduce handling errors and contribute to consistent process control when inspecting castings, housings or assemblies where medium-length depth checks are common. Clear measurement principle and easy reading The vernier system specified as 1/20 mm gives a readable increment of 0.05 mm, which aligns with DIN 862 expectations for analogue calipers. For technicians familiar with vernier operation, the scale permits quick interpretation; for less experienced users, the fixed graduations and the robust feel of the slide help avoid overpressure and misreads. The mechanical design therefore supports efficiency by combining tactile control with unambiguous scale markings. Practical deployment and maintenance benefits As a workshop tool, the gauge is suited to inspection benches and production lines where a balance between reach and stiffness is required. The medium-range format gives good reach without excessive flex, which is important for reproducible readings across larger components. Routine maintenance consists of keeping the measuring faces clean and lightly oiled to preserve slide quality and the matt-chrome finish; this ensures long service life and stable results in repeated depth checks. Contact Metav Werkzeuge for ordering or technical clarification on the M204.094 and discuss configuration or calibration options directly with our consultants Technical data Article number: M204.094 GTIN: 4054469102771 Standard: DIN 862 ECLASS: 21170349 TARIC/HS code: 90173000 Facts Measuring range: 0–500 mm Bridge: 250 mm Resolution: 0.05 mm Nonius: 1/20 mm (vernier) Special features Stainless-steel construction Scale and vernier matt chrome-plated Analogue vernier depth gauge Locking screw for slide fixation Category: caliper / depth gauge FAQ What measuring range does the Depth Gauge M204.094 offer? The Depth Gauge M204.094 provides a measuring range from 0 to 500 mm, making it suitable for medium-range depth measurements in workshop and toolroom applications. What accuracy and resolution can be expected from this vernier depth gauge? This vernier depth gauge has a vernier resolution of 0.05 mm (1/20 mm) and is supplied in accordance with DIN 862 for analogue calipers, supporting reliable routine measurements. Is the instrument suitable for regular metalworking inspection tasks? Yes, the robust stainless-steel construction and 500 mm range position the gauge as a practical choice for inspection of machined parts, housings and medium-sized assemblies within a production environment. How does the locking screw improve measurement results? The locking screw on the M204.094 secures the slide after adjustment, enabling repeatable depth readings and safer value transfer between workpiece and documentation. How should the vernier be maintained to preserve accuracy? Regular cleaning of the measuring faces, light lubrication of the slide and protection from corrosive environments will help preserve the matt-chrome finish and maintain consistent measurement behaviour. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Depth Gauge 150mm Base 0.05mm Vernier Stainless Steel DIN 862 Plastic Case - Metav IndustryLine
Take advantage of a 500 mm measuring range, 0.05 mm vernier resolution and stainless-steel construction for reliable depth checks in medium-sized assemblies. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Depth Gauge M204.053 — 500 mm range, 0.05 mm vernier (Metav IndustryLine) The Depth Gauge M204.053 is a precision depth gauge for medium-range workshop measurements, built to DIN 862 and intended for repeatable depth checks in machining, fixture and mould components. Stainless steel body, matt-chrome scale Vernier resolution 0.05 mm (1/20 mm) Complies with DIN 862 Locking screw for repeatable readings Reliable depth measurement for everyday workshop tasks This analogue gauge delivers precise depth readings across a 500 mm range, offering the best compromise between reach and rigidity for many machine‑shop tasks. The 1/20 mm vernier corresponds to 0.05 mm resolution, a common industrial standard that supports routine quality checks and pass/fail decisions. Because the instrument is constructed from stainless steel with a matt‑chrome scale, readings remain legible and the tool resists corrosion in a busy workshop environment. Designed for reproducibility and comfortable operation A simple locking screw secures the slider to prevent creeping once a measurement is taken, which improves repeatability when checking several similar components. The 150 mm bridge gives stable support while probing recesses or slots, so measurements remain consistent across multiple operations. The analogue layout keeps the tool robust and straightforward to use in production situations where electronic instruments might be unnecessary. Compliance and practical classification for shop planning Classified as a medium-range instrument (300–500 mm), this depth gauge is suited to the needs of mechanical workshops and small series production where reach and stiffness are required in balance. Conforming to DIN 862 ensures compatibility with established inspection routines and documentation. For enquiries about calibration certificates or specific accuracy requirements, Metav Werkzeuge can advise on traceable calibration options and delivery conditions. Contact Metav Werkzeuge for precise stock information, calibration options and application guidance: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M204.053 GTIN: 4054469102603 ECLASS: 21170349 Norm: DIN 862 Facts Measuring range: 500 mm Bridge (base width): 150 mm Resolution: 0.05 mm (1/20 mm vernier) Instrument type: Analogue depth gauge Special features Material: stainless steel Scale and vernier: matt-chrome finish Locking screw present Designed for medium-range workshop measurements FAQ What is the measuring range of this instrument? The depth gauge has a measuring range of 500 mm and is suitable for medium‑range workshop measurements. What resolution and vernier does the gauge use? The gauge uses a 1/20 mm vernier, corresponding to a resolution of 0.05 mm, as specified for the M204.053. Is the gauge suitable for corrosion-prone environments? Yes. The M204.053 is made from stainless steel with a matt‑chrome scale to improve resistance to corrosion in typical workshop conditions. Does the product comply with any standards? The instrument is manufactured to DIN 862, which supports integration into standard inspection procedures. Can a calibration certificate be provided? For calibration services or certificates, Metav Werkzeuge can provide options and guidance; please contact info@metav-werkzeuge.com for details. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Depth Gauge With Angle Attachment And Measuring Face, DIN 862, 1/50mm Vernier, Supplied In Case - Metav IndustryLine
Take advantage of a robust angle attachment, a 500 mm measuring range and a fine 1/50 mm nonius for reliable depth checks in jig, fixture and component measurement. Order the depth gauge directly via Metav Werkzeuge or consult our specialists for application-specific advice. Depth gauge M204.046 — analogue depth gauge with angle attachment, 500 mm range (Metav IndustryLine) The Depth gauge M204.046 is an analogue depth-measuring instrument with an integrated angle attachment, designed for workshop and jig‑and‑fixture measurements up to 500 mm under the DIN 862 standard 500 mm measuring range according to DIN 862 Precision nonius 1/50 mm for fine reading Angle attachment and 100 mm bridge for versatile use Supplied in protective transport case Stable measuring geometry for repeatable results The instrument’s construction from special steel with a matt‑chromed scale and nonius provides a robust reference surface that resists wear in daily workshop use. The 100 mm bridge increases stability when checking deeper pockets or stepped components, so measurements remain reproducible across multiple parts. Conformity with DIN 862 ensures the tool meets recognised workshop standards, simplifying integration into existing inspection routines and documentation. Fine analogue reading for practical precision A nonius 1/50 mm gives a reading increment of 0.02 mm, placing the gauge in the high mechanical‑precision category for analogue instruments. This level of resolution is well suited to quality control in metalworking and tooling workshops where a clear, tactile reading is preferred over electronic displays. The mechanical design eliminates battery dependency while keeping interpretation straightforward for trained staff, delivering both speed and dependable resolution for routine depth checks. Designed for workshop handling and transport The attachment for angle measurements extends the instrument’s versatility, enabling reliable depth readings from angled or stepped references without elaborate set‑ups. Supplied in a protective transport case, the gauge is ready for safe storage and movement between bench and machine. Classification as a medium measuring‑range instrument (300–500 mm) makes it a practical choice where reach and stiffness must be balanced — for example in fixture inspection, housing depth checks or medium‑sized component validation. For tailored advice or to secure a Metav IndustryLine depth gauge M204.046 with angle attachment and protective case, contact Metav Werkzeuge for application guidance and order support Technical data Article number: M204.046 GTIN: 4054469102511 Eclass: 21170349 Customs tariff number: 90173000 Core measurements Measuring range: 0–500 mm Bridge length: 100 mm Nonius: 1/50 mm Standard: DIN 862 Materials & features Material: Special steel; scale and nonius matt‑chromed Angle attachment included Supplied in transport case Analogue depth gauge (mechanical) Category: Medium measuring range (300–500 mm) FAQ How precise is the reading with this depth gauge? The nonius of 1/50 mm corresponds to a reading increment of 0.02 mm; the Metav IndustryLine depth gauge M204.046 therefore offers high mechanical precision for analogue workshop measurements. What measuring range and applications does the instrument cover? The instrument covers 0–500 mm and is classed as a medium measuring‑range tool, suited to fixture inspection, housing depth checks and general workshop depth measurements. What is the function of the angle attachment? The angle attachment provides a stable reference for measurements from angled faces or steps, improving repeatability when measuring slots, shoulders or recessed features. Is the gauge ready for transport and storage? Yes, the gauge is supplied in a protective transport case suitable for workshop handling and secure storage during transport. Which standard does the instrument comply with? The instrument is manufactured to the DIN 862 standard, aligning with common workshop and quality‑control requirements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Depth Gauge With Removable Hook 0.05mm Nonius Matt Chrome Scale In Wooden/Plastic Case - Metav IndustryLine
Reliable medium-range measurement and robust stainless‑steel construction deliver consistent results across workshop tasks; the reversible hook and DIN 862 conformity make versatile depth checks straightforward. Order the instrument directly via Metav Werkzeuge or consult their specialists for tailored advice. Depth Gauge M204.057 — Analogue depth gauge, 500 mm range with reversible hook (Metav IndustryLine) The Depth Gauge M204.057 is an analogue depth measuring instrument for medium‑range workshop and inspection tasks, offering a 500 mm measuring capacity with a reversible hook and a matt‑chrome vernier for durable, repeatable readings. *500 mm measuring range, DIN 862 compliant *0.05 mm vernier resolution (1/20 mm) *Stainless steel body with matt chrome scale *Delivered in transport case for safe handling Precision where it counts The instrument is designed for reliable depth measurement up to 500 mm, complying with DIN 862 to ensure industry‑recognised tolerances. The mechanical vernier provides a 0.05 mm reading step (1/20 mm), a resolution well suited to workshop and tooling verification tasks where visual clarity and repeatable settings matter. As a medium‑range device, it bridges the gap between compact gauges and long‑span instruments, offering the reach required for larger housings and fixtures while remaining controllable by a single operator. The analogue vernier layout keeps the measurement process intuitive: once the stock is seated, the scale and vernier give an immediate, traceable value without the need for batteries or electronic interfaces. Built for dependable workshop use Constructed from stainless steel with the scale and vernier matt‑chrome plated, the tool resists corrosion and maintains legibility in daily use. The interchangeable hook allows the instrument to adapt to varying edge geometries and shallow recesses, expanding its practical applications on the shop floor. A bridge or rod length of 150 mm provides stable support when measuring deeper cavities, and the supplied transport case protects the gauge during storage and movement between workstations. Robust mechanical components reduce the need for frequent maintenance, making this depth gauge a pragmatic choice for production environments where durability and uptime are essential. Practical operation and efficiency gains Operation remains straightforward: position the stock, engage the reversible hook if required, and read the vernier for a clear 0.05 mm result—no power source or software needed. This simplicity translates into faster cycle times for repetitive checks and a lower risk of measurement downtime. For quality procedures, the instrument’s conformity with established standards simplifies documentation and audit trails. Metav IndustryLine’s distribution from Emmerich ensures consistent availability and a reliable supply chain; purchasing through Metav adds the benefit of a quality filter for European workshops, helping to integrate precision tools into everyday production with confidence. Choose the Metav IndustryLine Depth Gauge M204.057 for dependable medium‑range depth measurement and contact Metav Werkzeuge in Emmerich for personalised advice and fast supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M204.057 GTIN: 4054469102658 Norm: DIN 862 Analogue: yes Core technical data Measuring range: 0–500 mm Bridge/rod length: 150 mm Resolution: 0.05 mm (1/20 mm) Nonius position: bottom Tariff code: 90173000 Special features Material: stainless steel; scale and vernier matt‑chrome plated Reversible hook and interchangeable rod Delivered in a transport case for safe handling Analogue depth gauge for workshop and inspection use DIN 862 compliant FAQ What measuring range does the depth gauge cover? The depth gauge covers a measuring range of 0–500 mm, making it suitable for medium‑range depth checks in engineering and workshop applications. What resolution and vernier type does the instrument use? The instrument uses an analogue vernier with a 0.05 mm resolution (1/20 mm), providing clear, repeatable readings without electronic components. Is the gauge suitable for daily workshop use? Yes, the Metav IndustryLine depth gauge M204.057 features a stainless steel body and matt‑chrome scale, designed for robust, everyday operation in production and inspection environments. Does the delivery include protective packaging? The depth gauge is supplied with a transport case to protect the instrument during storage and transit, ensuring the measuring surfaces remain undamaged. Can the gauge adapt to different edge geometries? Yes, the reversible hook and interchangeable rod allow adaptation to varying edge and recess profiles, increasing the instrument’s versatility on the shop floor. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Precision Caliper Workshop Jawless, Fine Adjustment, Monoblock 150mm Jaws, Hardened Stainless Steel, DIN 862, Supplied in Case - Metav IndustryLine
A robust monoblock vernier with hardened stainless-steel construction and a fine-adjustment screw delivers stable, repeatable readings across a 0–500 mm span; the instrument’s 0.05 mm graduations align with industrial shop tolerances while the 150 mm jaw length reaches recessed features reliably. Order the caliper directly via Metav Werkzeuge or ask our consultants if needed. Workshop Vernier Caliper M201.325 — 0–500 mm, hardened stainless steel, fine adjustment (Metav IndustryLine) the Workshop Vernier Caliper M201.325 is an analogue, monoblock caliper designed for medium-range workshop measurement tasks where durability and steady handling are essential 0–500 mm measuring range for medium components Hardened stainless steel with matt-chromed scale Fine-adjustment screw for precise locking Monoblock beam for improved stiffness Built for medium-range workshop measurement and repeatability The caliper is classified in the medium measuring-range category (max. 300–500 mm), making it suitable for fixtures, housings and larger assemblies that still require single-handed handling. The monoblock beam design improves profile stiffness and reduces deflection over longer spans, which supports reproducible measurements in everyday production. Hardened stainless steel and a matt-chromed scale combine wear resistance with legible graduations, so readability and longevity remain high even under workshop conditions. Vernier accuracy that matches industrial expectations This analogue instrument uses a vernier arrangement that provides a reading step equivalent to 0.05 mm (metric vernier) and a secondary imperial division on the upper scale; this resolution corresponds to the common industrial standard for mechanical shop work. Compliance with DIN 862 is ensured for jaw lengths up to 200 mm, with larger lengths produced to a factory standard; the result is a straightforward classification of measurement uncertainty that technicians recognise and trust during quality checks and setup procedures. Design elements that reduce user error and improve handling A dedicated fine-adjustment screw permits controlled approach and firm locking without sudden slippage, which reduces overshoot and settling errors when aligning jaws. The 150 mm jaw length provides extended reach for deeper internal and external features while preserving rigidity. The combination of a clearly graduated scale and a smooth vernier slide lowers the influence of handling variations, so measurement cycles are faster and the rate of re-work is reduced. Durable construction and practical integration into the workshop The instrument’s construction emphasises practical durability: hardened materials, corrosion-resistant finish and robust slide mechanics minimise maintenance needs and downtime. At a substantive build weight the caliper remains comfortable to guide and is well suited to bench or on-machine inspection routines. The tool integrates naturally into standard shop workflows, supporting rapid checks at the lathe, milling machine or assembly station and helping to maintain a consistent production flow. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine M201.325 and to arrange delivery or specification clarification Technical data SKU: M201.325 GTIN: 4054469101491 Category: Calipers / Vernier caliper Facts Measuring range: 0–500 mm Jaw length: 150 mm Weight: 3 kg Resolution (vernier): 0.05 mm Special features Material: hardened stainless steel, matt-chromed scale Fine-adjustment screw Monoblock beam design Analogue vernier with dual-scale (metric and imperial) Conformity: DIN 862 up to 200 mm, above 250 mm to factory standard FAQ What measuring range does this caliper cover? The Metav IndustryLine Workshop Vernier Caliper M201.325 covers a measuring range of 0–500 mm, placing it in the medium-range class for workshop and machine-shop tasks. What resolution and accuracy can be expected? Readings are taken from the analogue vernier with a metric step of 0.05 mm; this corresponds to standard analogue caliper practice and aligns with industrial shop tolerances described under DIN 862 for the applicable sizes. What materials and finishes are used? The instrument is made from hardened stainless steel with a matt-chromed scale to resist wear and corrosion while keeping graduations legible throughout regular use. How does the fine-adjustment screw improve measurements? The fine-adjustment screw enables controlled closing and secure locking of the jaws, reducing slip and enabling reproducible placement when measuring small features or making repeated checks. Which workshop tasks is this caliper best suited to? The caliper is ideal for medium-sized components such as fixtures, housings and typical machine parts where a combination of reach, stiffness and single-handed operation is required; it integrates well with bench, lathe and milling-machine inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Precision Scriber Caliper T-Form 160mm Stop, Hardened Matt Chrome Finish, Case - Metav IndustryLine
Take advantage of a robust T‑head layout and fine adjustment for repeatable scribing over a medium‑range measuring span; the combination of hardened, matt chrome‑plated special steel and analogue nonius reading provides dependable workshop performance. Order the caliper directly via Metav Werkzeuge or consult the team for specification advice. Precision scribing caliper (T‑head) 500 mm, 160 mm stop — Metav IndustryLine The Precision scribing caliper (T‑head) 500 mm is a medium‑range layout instrument designed for precise marking and inspection tasks in toolmaking, fixture construction and general mechanical workshops. T‑head design for stable scribing and layout Fine adjustment for controlled, repeatable markings Hardened special steel with matt chrome finish Stable layout and reproducible markings for production tasks The T‑head format with a fixed 160 mm stop ensures stable contact when transferring datum lines or checking assembly interfaces, which reduces setup time and rework. The built‑in fine adjustment screw enables careful micro‑alignment of the scriber or jaw before committing a mark, so each setting is repeatable and reduces human error. With an analogue nonius scaled to 0.05 mm, the tool offers a clear, mechanical indication of position that is well suited to standard workshop quality control and layout work. Durable construction that keeps wear and measurement drift low Constructed from hardened special steel and finished in matt chrome, the instrument resists corrosion and abrasive wear while maintaining precise jaw geometry. The material choice and surface treatment protect the scale and sliding surfaces against everyday shop contaminants, which preserves accuracy and extends service intervals. Classified as a medium‑range caliper (measuring up to 500 mm), the design balances stiffness and reach to permit reliable measurements on assemblies and larger components without sacrificing handling. Practical uses and workflow benefits across trades The scribing caliper is tailored for workshop tasks where clear datum transfer and durable, mechanical operation are priorities: marking blanks, checking fixture references, and pre‑setting assembly contacts. The analogue operation requires no batteries and supports quick visual comparison during repetitive tasks, helping to maintain a steady throughput. Delivered in a transport case (plastic or wooden) for protection during transit, the tool is ready for immediate use on the bench or in a tooling cupboard. For layout and marking operations that demand mechanical reliability, choose the Metav IndustryLine precision scribing caliper and contact Metav Werkzeuge for technical advice and rapid supply from Emmerich. Technical data Article number: M201.144 GTIN: 4054469100760 ECLASS: 21170344 TARIC (HS) code: 90173000 Core specifications Measuring range: 0–500 mm Maximum measuring span: 500 mm Reading/Resolution: 0.05 mm (analogue nonius) Stop length: 160 mm Special features T‑head design (layout/scribing) Fine adjustment screw for controlled setting Hardened special steel, matt chrome‑plated Analogue operation (nonius) Supplied in transport case (plastic or wooden) FAQ What is the measuring range and classification of this caliper? The caliper covers 0–500 mm and is classified as a medium‑range precision instrument suitable for larger workshop layout and fixture work. How fine is the reading and what accuracy can be expected? The analogue nonius provides a resolution of 0.05 mm; this level of detail is appropriate for industrial workshop standards and repeatable layout tasks. Is the instrument delivered ready for use and protected for transport? Yes, the caliper is supplied in a transport case (plastic or wooden) and arrives ready for workshop use. Which materials is the caliper suitable for when used as a scribing and layout tool? The device is intended for workshop layout across common workshop materials; its hardened steel construction and finish ensure resistance to wear during routine marking and inspection tasks. Does the caliper include any fine‑setting feature for precise marking? A dedicated fine adjustment screw is fitted to enable controlled, repeatable positioning of the jaw prior to scribing or marking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Rod Divider With Carbide Marking Tips Ø25x100 - Metav IndustryLine
Beam compass combines stainless steel construction, carbide scribing tips and a 0–500 mm working range for reliable workshop layout and marking. Order the tool directly via Metav Werkzeuge or consult our advisors for application support and delivery options. Bar compass M201.274 (Beam compass) — 0–500 mm, carbide-tipped Bar compass M201.274 is a workshop-grade beam compass for precise scribing and layout of medium-sized components, designed for machine shops, toolrooms and general metalworking. Stainless steel construction for longevity Carbide scribing tips for crisp markings 0–500 mm range for medium workshop tasks Compatible with calipers up to 1000 mm diameter Durable construction for consistent layout work The beam compass is manufactured from stainless steel, giving a stable and wear-resistant beam that keeps its geometry under frequent use. The solid design reduces flexing during longer scribing strokes and maintains alignment over time, which in practice lowers the risk of rework. With a mass of 2 kg and a rod diameter of 19 mm, the unit balances handable weight with sufficient stiffness for repeatable marking on sheet, plate and assemblies. Carbide points for precise and lasting marks Equipped with carbide scribing tips, the divider produces consistently visible layout lines on hard and abrasive surfaces. Carbide tips retain a sharp edge significantly longer than plain steel, so the marking quality remains constant over extended production runs. The measuring tips are sized Ø25 × 100 mm, optimised for stability when engaging the workpiece; this ensures crisp scribe traces even on thicker or textured materials, supporting accurate downstream machining or drilling operations. Practical range and workshop compatibility Classified in the medium range for calipers and beam tools, the compass covers 0–500 mm, which is the typical span needed in machine and metal workshops for fixtures, housings and medium-sized components. The design is also specified as compatible with calipers for diameters up to 1000 mm, allowing integration into existing layout workflows and simplifying transfers between measuring and marking operations. The analogue concept removes dependence on batteries or electronics, enabling immediate use at the bench or on the shop floor. Straightforward handling that supports productivity Analogue adjustment and a plain but effective locking mechanism make the tool fast to set up and simple to reuse throughout a shift. The instrument’s readable geometry and robust tips reduce interruptions for tip dressing or replacement, helping maintain throughput. Supplied as a practical workshop instrument rather than a delicate precision gauge, it suits technicians and craftsmen who require dependable layout capability day in, day out—backed by Metav’s focus on reliable supply and industry-grade products. For a dependable beam compass from the Metav IndustryLine range, contact Metav Werkzeuge in Emmerich to discuss suitability for specific applications or to arrange purchase; the Metav team can provide precise ordering and delivery information via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M201.274 GTIN: 4054469182742 Manufacturer: Metav IndustryLine Facts Measuring range: 0–500 mm Maximum measuring range: 500 mm Weight: 2 kg Rod diameter: 19 mm Suitable for calipers/diameters up to 1000 mm Special features Material: stainless steel (INOX) Carbide (HM) scribing tips Analogue beam compass configuration Measuring tips Ø25 × 100 mm ECLASS: 21170344 FAQ How is the beam compass best used for layout tasks? The beam compass is intended for scribing and dividing work across medium-sized components; its stainless-steel beam and carbide tips allow clear layout lines for subsequent machining or assembly when using the Bar compass M201.274. Can the tool mark hard materials reliably? Yes. The carbide-tipped points maintain sharpness on harder or abrasive surfaces, so the compass provides durable, repeatable scribing without rapid wear. Is this instrument suitable for workshop and machine-shop use? The construction and 0–500 mm range make it suitable for standard machine-shop layout; the design balances stiffness and reach for everyday marking tasks. Are the measuring tips large enough for stable marking? The measuring tips are specified as Ø25 × 100 mm, offering a stable contact area that supports consistent scribe depth and visible marks, reducing slippage on textured surfaces. Does the product work with large-diameter measurements? The unit is compatible with calipers and setups handling diameters up to 1000 mm, enabling its use in broader layout workflows and with larger fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Werkstatt-Messschieber, 0,02mm, Feineinstellung, Werksnorm - Metav IndustryLine
Das 1989 gegründete Traditionsunternehmen für den Vertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für hevorragende Messwerkzeuge zu einem hervorragenden Preis. Das wichtigste Messbereich: bis 500mm Ablesung: 0,02mm Material: Spezialstahl, Skala und Nonius mattverchromt Groß gedacht, sauber gemessen Der Messbereich von bis 500mm eröffnet spürbar mehr Freiheit beim Prüfen größerer Bauteile. Ob Formplatten, Vorrichtungsrahmen oder lange Profile – Abstände, Außenkanten und Aufbauten lassen sich in einem Zug erfassen, ohne ständiges Umspannen. Das spart Zeit, hält die Messpunkte konsistent und macht Reihenmessungen im Vorrichtungs‑ und Formenbau deutlich flüssiger. Gerade bei Baugruppen mit überstehenden Teilen oder tiefen Aufnahmen bleibt der Überblick erhalten: Kante zu Kante, Loch zu Loch, Fläche zu Fläche – der Arbeitsablauf bleibt ruhig und klar strukturiert. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber. Die richtige Toleranz einhalten nach Werksnorm Alle Komponenten unseres Messwerkzeugs werden konsequent gemäß Werksnorm gefertigt. Die Norm definiert präzise Vorgaben für Werkstoffe, Toleranzen, Fertigungsabläufe und Kalibrierprotokolle. Durch die strikte Einhaltung dieser Spezifikationen sichern wir Maßhaltigkeit, Reproduzierbarkeit und die weltweite Anerkennung der Prüfzertifikate – entscheidende Faktoren für Audit- und Freigabeprozesse. Profi-Tip: Wie liest man die Haupt- und Noniusskala sicher ab? Zuerst den ganzen Millimeter an der Null-Linie des Nonius auf der Hauptskala ablesen, dann auf dem Nonius den Strich suchen, der exakt mit einem Hauptskalen-Strich fluchtet – das ergibt die Dezimalstelle (bei 1/20-Teilung 0,05 mm, bei 1/50-Teilung 0,02 mm). Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Telefon: +49 2822 7131930 Produkteigenschaften: Bestellnummer: M201.026 Messbereich: 0 bis 500mm Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber Ausführung: analog Gewicht: 2,3kg Material: Spezialstahl, Skala und Nonius mattverchromt Lieferung im Kasten Norm: Werksnorm Schnabellänge: 90mm Ablesung: 0,02mm mit Feineinstellung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Zu beachtende Faktoren beim Erwerb eines Messschiebers: Neben den zentralen Faktoren Genauigkeit und Messbereich gewinnen auch komplette Funktionen wie der Datenausgang oder die Überwachung der Messkraft zunehmend an Bedeutung. Für die Qualitätssicherung sowie Laboreinsätze erweist sich der Messschieber mit geregelter Messkraft als besonders nutzbringend. Darüber hinaus ist sinnvoll zu betrachten, ob eine Kalibrierung des Messschiebers notwendig ist. Eine Kalibrierung kann direkt nach Lieferung vorgenommen werden und sollte zur Sicherung der Prozessqualität jedes Jahr erneuert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Messwerkzeug von Metav IndustryLine haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
500mm Werkstatt-Messschieber, 0,05mm, Feineinstellung, Werksnorm - Metav IndustryLine
Der von Ludwig Josef Bayer 1989 gegründete Traditionsvertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem hervorragenden Preis. Das wichtigste auf einen Blick Messbereich: bis 500mm Ablesung: 0,05mm Material: Spezialstahl, Skala und Nonius mattverchromt Weite Strecken, klare Ergebnisse – 0 bis 500mm Mit 0 bis 500mm wächst der praktische Spielraum im Tagesgeschäft. Du erreichst entfernte Kanten, misst über Montagepunkte hinweg und kontrollierst Abstände an größeren Bauteilen, ohne die Position zu wechseln. So bleibt der Fokus auf dem Wesentlichen: zügig prüfen, klare Ergebnisse erhalten, Bauteile sicher freigeben – besonders hilfreich bei Formeinsätzen, Spannrahmen und Prüfvorrichtungen. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber. Immer die richtige Toleranz nach Werksnorm Alle Komponenten unseres Metav IndustryLine Werkstatt-Messschieber werden konsequent gemäß Werksnorm gefertigt. Die Norm definiert präzise Vorgaben für Werkstoffe, Toleranzen, Fertigungsabläufe und Kalibrierprotokolle. Durch die strikte Einhaltung dieser Spezifikationen sichern wir Maßhaltigkeit, Reproduzierbarkeit und die weltweite Anerkennung der Prüfzertifikate – entscheidende Faktoren für Audit- und Freigabeprozesse. Expertenhinweis: Welche Messkraft ist richtig? Nur mit Daumendruck schließen – übermäßiges Klemmen biegt die Schenkel zusammen und führt zu „negativen“ Messwerten. Produktmerkmale für den Werkstatt-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber Bestellnummer: M201.025 Zahlen & Fakten: Messbereich: 0 bis 500mm Gewicht: 2,2kg Norm: Werksnorm Schnabellänge: 90mm Ablesung: 0,05mm Besonderheiten Ausführung: analog Material: Spezialstahl, Skala und Nonius mattverchromt Lieferung im Kasten mit Feineinstellung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Welche Kriterien beim Kauf eines Messschiebers wichtig sind: Während der Genauigkeit und dem Messbereich Beachtung geschenkt werden muss, sind auch Funktionen wie Dateneingabe-Optionen und Kontrolle der Messkraft von maßgeblicher Relevanz. Das Arbeiten mit einem Messschieber, der eine exakt eingestellte Messkraft aufweist, ist in der Qualitätssicherung und bei Labortätigkeiten von großem Nutzen. Zusätzlich sollten man darauf Achten, ob man einen kalibrierten Messschieber braucht. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Metav IndustryLine Messwerkzeug haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
500mm Werkstatt-Messschieber, 0,05mm, Feineinstellung, Werksnorm - Metav IndustryLine
Die überragenden Bewertungen von Metav Werkzeuge stehen für 42.000 glückliche Kunden. Erlebe es aus erster Hand und kaufe auf metav-shop.de! Das wichtigste auf einen Blick für Metav IndustryLine 500mm Werkstatt-Messschieber Messbereich: bis 500mm Ablesung: 0,05mm Material: Spezialstahl, Skala und Nonius mattverchromt Mehr Reichweite, weniger Umspannen0 bis 500mm Mit einem Messbereich von bis 500mm bleiben selbst ausgedehnte Werkstücke überschaubar. Große Flächen, lange Kanten und weit gesetzte Bohrungen lassen sich strukturiert abfahren, ohne das Bauteil zu drehen oder umzusetzen. Das erleichtert das Prüfen von Formplatten, Trägern, Profilen und Rahmenbauteilen im Vorrichtungs‑ und Formenbau. Der Vorteil zeigt sich im Ablauf: Du bleibst im Takt, behältst den Bezug und kommst schneller zu belastbaren Ergebnissen. Wir haben uns Gedanken gemacht, wie wir die einzelnen Messbereiche der Messschieber Klassifizieren können. Klassifizierung Messbereiche beim Messschieber. Die richtige Toleranz einhalten nach weltweit gültigen Standards Alle Komponenten unseres Werkstatt-Messschieber Metav IndustryLine werden konsequent gemäß Werksnorm gefertigt. Die Norm definiert präzise Vorgaben für Werkstoffe, Toleranzen, Fertigungsabläufe und Kalibrierprotokolle. Durch die strikte Einhaltung dieser Spezifikationen sichern wir Maßhaltigkeit, Reproduzierbarkeit und die weltweite Anerkennung der Prüfzertifikate – entscheidende Faktoren für Audit- und Freigabeprozesse. Fachhinweis: Welche Messkraft ist richtig? Nur mit Daumendruck schließen – übermäßiges Klemmen biegt die Schenkel zusammen und führt zu „negativen“ Messwerten. Hohe Wiederholgenauigkeit durch die Feineinstellung Die Feineinstellung, auch als Feinverstellung bezeichnet, ist eine kleine Rändel- oder Daumenschraube, mit der der bewegliche Schieber eines Messschiebers in äußerst feinen, genau kontrollierbaren Schritten verschoben werden kann. Auf diese Weise wird ermöglicht, die Backen ohne Spiel an das Werkstück anzulegen, eine gleichmäßige Messkraft sicherzustellen und den Messwert kontrolliert und ohne Überschreiten einzustellen. Das steigert die Genauigkeit, die Wiederholbarkeit sowie den Bedienkomfort, insbesondere bei großen oder hochwertigen Werkstatt-Messschiebern. Sie sind unsicher, ob das Werkzeug zu Ihrer Anwendung passt?? Oder es fehlen Ihnen noch technische Daten?? Kein Problem, sprechen Sie uns an!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Leistungsmerkmale zumWerkstatt-Messschieber von Metav IndustryLine: Bestellnummer: M201.035 Messbereich: 0-500mm Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber Ausführung: analog Gewicht: 2,7kg Material: Spezialstahl, Skala und Nonius mattverchromt Lieferung im Kasten Norm: Werksnorm Schnabellänge: 150mm Ablesung: 0,05mm mit Feineinstellung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf beim Erwerb eines Messschiebers Wert gelegt werden sollte: Neben der Präzision und dem Messbereich sind zusätzliche Funktionen wie ein Datenausgang oder die Messkraftüberwachung entscheidend. Ein Messschieber mit sorgfältig kalibrierter Messkraft ist speziell für die Qualitätssicherung und die Nutzung in Laboren von Vorteil. Darüber hinaus ist sinnvoll zu betrachten, ob eine Kalibrierung des Messschiebers notwendig ist. Schon im Zuge der Auslieferung kann die Kalibrierung erfolgen, und mit jährlicher Beständigkeit wird die Prozesssicherheit unterschützt.
500mm Workshop Caliper With 150mm Pointed Jaws, 0.02mm Resolution, Fine Adjustment, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of sturdy monoblock construction, hardened stainless-steel measuring surfaces and a 0–500 mm range with 0.02 mm resolution for reliable workshop measurements; order directly via Metav Werkzeuge or request advice from our consultants for specification matching. M201.305 Workshop Caliper with Point — 0–500 mm, hardened stainless steel The M201.305 Workshop Caliper with Point is a robust analogue monoblock caliper designed for workshop use, enabling external, internal and step measurements on components up to 500 mm. Workshop caliper M201.305 by Metav IndustryLine Monoblock construction for increased stiffness Fine-adjustment spindle for precise positioning Suitable for outside, inside and step measurements Reliable long-span measurements for fixtures and assemblies The monoblock frame and hardened measuring faces give this caliper dimensional stability across its 0–500 mm span, placing it in the mid‑range class suited to fixture, mould and general workshop measurement tasks. The monoblock design reduces torsion and improves reproducibility compared with split‑beam designs, which means measurements stay consistent when handling larger components. The matt‑chromed scale resists glare, helping operators read values more reliably under workshop lighting; the caliper is thus engineered for repeatable results rather than delicate, short‑range lab work. Clear analogue readout with fine positioning for accurate setting This analogue instrument combines a dual nonius arrangement (top scale in 1/1000" and bottom scale in 1/50 mm) with a fine‑adjustment spindle, enabling careful alignment before taking a reading. The bottom nonius corresponds to a 0.02 mm incremental scale, which is appropriate for industrial workshop tolerances and typical quality control tasks. The fine adjustment lets operators close the jaws gently and set the measuring faces without overshoot, improving the effective usability of the mechanical scale and reducing measurement scatter caused by manual handling. Practical features that support workshop workflow Built for everyday use, the caliper includes a 150 mm long jaw profile for deeper reach when measuring recesses or stepped features, and the jaw geometry is optimised for external and internal contact points as well as step gauging. The instrument is supplied in a transport case to protect it during storage and transit, and it is finished in hardened stainless steel with a matt chrome scale for durability in harsh workshop environments. The device is manufactured to the maker’s factory standard and is intended as a reliable, serviceable tool for production and maintenance departments that need a robust mechanical measuring solution. Contact Metav Werkzeuge for tailored advice on integrating the M201.305 workshop caliper into measurement routines and to arrange supply direct from Emmerich. Technical data Article number: M201.305 GTIN: 4054469101279 ECLASS: 21170344 SKU: M201.305 Facts Measuring range: 0–500 mm Resolution: 0.02 mm (1/50 mm) Jaw length: 150 mm Nonius scales: 1/1000" (top) and 1/50 mm (bottom) Special features Monoblock construction Hardened stainless‑steel measuring faces Matt‑chromed scale Fine‑adjustment spindle Analogue caliper with point for external, internal and step measurements Supplied in a protective transport case Manufacturer’s factory standard (Werksnorm) FAQ What measurement range does the caliper cover? The M201.305 workshop caliper covers a measuring range of 0–500 mm, providing the reach required for medium‑sized components. How fine is the resolution and how is it read? Resolution is 0.02 mm (1/50 mm) on the metric nonius; the top nonius offers inch‑based graduations at 1/1000". Readings are taken from the analogue scales with the aid of the fine‑adjustment spindle for precise setting. Is the caliper suitable for rough workshop environments? Yes, the caliper is manufactured in hardened stainless steel with a matt‑chromed scale and comes in a transport case, making it suitable for routine workshop use and transport. Which measurement types are supported by the instrument? The caliper supports external, internal and step measurements, with jaw geometry and a long jaw profile for deeper reach when needed. Who supplies and is responsible for this caliper? Metav IndustryLine supplies the M201.305 workshop caliper and can advise on integration into workshop measurement procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Caliper With Pointed Jaws, Fine Adjustment, Monoblock Design - Metav IndustryLine
Take advantage of a robust 500 mm measuring range combined with a hardened stainless steel monoblock frame and a fine-adjustment spindle for smooth, repeatable workshop measurement. Order the caliper directly via Metav Werkzeuge or request advice from our consultants. Workshop caliper M201.335.1 — 500 mm vernier caliper, hardened stainless steel, fine adjustment (Metav IndustryLine) The Workshop caliper M201.335.1 is an analogue vernier caliper for heavy-duty workshop use, offering a 500 mm range, dual vernier scales and pointed jaws for precise positioning across external, internal and step measurements. 500 mm measuring range Hardened stainless steel construction Fine-adjustment spindle for controlled closing Monoblock design for improved rigidity Reliable range and robust construction for daily workshop use The caliper's 500 mm measuring range places it in the medium class of tools, suited to larger fixtures and assemblies while remaining easy to guide by hand. A monoblock frame reduces flex and improves long-term stability under workshop conditions. The body is made from hardened stainless steel with a matt-chrome scale, combining corrosion resistance with a low-reflection surface that eases reading under poor lighting. Compliance with DIN 862 for jaw geometry (applicable where specified) ensures the instrument matches recognised workshop standards. Precision handling that produces repeatable results Measurement resolution is 0.05 mm, achieved by a mechanical vernier arrangement that includes an imperial/metric dual scale (1/128" above, 1/20 mm below) for cross-referencing. A dedicated fine-adjustment spindle enables slow, controlled closing of the jaws, which reduces operator-induced variation and speeds up repetitive measurement tasks. The pointed jaws allow stable engagement on edges and grooves where standard flat jaws struggle, contributing to faster set-ups and fewer retakes. Practical features that support productivity and longevity The instrument is configured as a true workshop instrument: a monoblock frame for stiffness, hardened contact surfaces for wear resistance and a matt-chrome scale for durable legibility. The jaw length of 200 mm is optimised for a mix of accessibility and rigidity when measuring larger components. Being an analogue instrument, it requires no batteries and is impervious to display faults, making it a dependable choice where uptime matters. Clear, mechanical graduation and robust construction help reduce measurement uncertainty in everyday production and maintenance tasks. Choose the Metav IndustryLine workshop caliper for consistent 500 mm accuracy and rugged service life — contact Metav Werkzeuge for product matching and fast delivery from our Emmerich location. Technical Data SKU: M201.335.1 GTIN: 4054469101743 eCl@ss: 21170344 Tariff number: 90173000 Numbers / Core technical data Measuring range: 0–500 mm Resolution: 0.05 mm Vernier scales: 1/128" (top) and 1/20 mm (bottom) Jaw length: 200 mm Norm: DIN 862 (where applicable) Designs / Special features Material: hardened stainless steel with matt-chrome scale Construction: monoblock frame Type: analogue vernier caliper Fine adjustment spindle for controlled jaw movement Pointed tips for precise positioning Suitable for external, internal and step measurements FAQ What measuring tasks is this caliper best suited for? The caliper is intended for workshop measurement of medium-sized components; its 500 mm range and robust construction suit fixtures, housings and general machine‑shop tasks. How precise is the instrument for production checks? The mechanical setup yields a resolution of 0.05 mm, supported by a dual vernier system (1/128" and 1/20 mm) for reliable cross-checking in both metric and imperial units. Are the jaws suitable for edge and groove measurements? Yes, the tool features pointed tips that stabilise contact in narrow grooves and on edges where flat jaws would be less secure. Does the caliper comply with recognised standards? Jaw geometry and basic dimensions follow DIN 862 where applicable; further specification is provided in the technical data for verification. Is the instrument suitable for harsh workshop environments? The hardened stainless steel construction and matt-chrome scale increase resistance to wear and corrosion, making the caliper well suited to demanding shop-floor conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Caliper With Pointed Jaws, Fine Adjustment, Monoblock, 0.05mm Graduation, Supplied In Case - Metav IndustryLine
Take advantage of the combination of robust monoblock construction, fine-adjustment setting and a 500 mm measuring range for reproducible workshop measurements; order the workshop caliper directly via Metav Werkzeuge or ask our consultants if needed. M201.335.2 Workshop Vernier Caliper — 500 mm range, hardened stainless steel The M201.335.2 Workshop Vernier Caliper is a heavy‑duty monoblock caliper designed for medium‑format measuring tasks in production and maintenance environments, offering fine adjustment and pointed jaws for precision work. 500 mm measuring range Hardened stainless steel construction Fine-adjustment thumbwheel for precise setting Monoblock profile for high stiffness Consistent accuracy for shop-floor control The analogue vernier design provides a clear 0.05 mm resolution (bottom scale) and an additional inch scale at 1/128" (top), which supports mixed‑unit workflows without compromise. The hardened stainless steel beam and matt‑chromed scale minimise wear and glare, while the fine‑adjustment thumbwheel allows reproducible closure of the jaws during repetitive checks. Together these features reduce measurement scatter and rework, delivering reliable dimensional control for metalworking and fixture assembly. The right size for everyday machining tasks With a measuring span up to 500 mm, this instrument is classified as a medium caliper in workshop practice — offering the best balance between reach and rigidity for components such as housings, mounts and larger subassemblies. The 250 mm jaw length increases contact area on longer profiles, helping to maintain alignment during external measurements and improving stability when measuring larger faces compared with shorter‑jaw models. Built to withstand workshop conditions The single‑piece monoblock design enhances profile stiffness and reduces torsion during handling, which is crucial when measuring on machines or in fixtures. Pointed jaw tips permit access to reduced features and grooves, while the hardened material resists knocks and abrasion. The instrument’s vernier layout follows recognised metrology practice and is marked to the norm indicated, ensuring compatibility with standard inspection routines in industrial environments. Practical operation and traceable conformity This vernier caliper features an intuitive mechanical nonius with both metric and imperial readouts, plus a fine‑adjustment mechanism for careful positioning without over‑tightening. The product is supplied according to the stated norm guidance: DIN 862 applies for shorter jaw lengths; for the 250 mm jaw length the caliper is produced to the manufacturer's standard. Such conformity supports straightforward integration into existing quality workflows and documentation routines. Contact Metav Werkzeuge today to discuss suitability for specific applications or to request further technical details — Metav Werkzeuge provides expert advice from Emmerich and can be reached at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M201.335.2 GTIN: 4054469101750 Manufacturer: Metav IndustryLine Facts Measuring range: 0–500 mm Jaw length: 250 mm Resolution: 0.05 mm (bottom), 1/128" (top) Scale finish: matt-chromed Type: analogue vernier caliper Special features Monoblock design Fine-adjustment thumbwheel Hardened stainless steel material Pointed jaw tips Complies with DIN 862 (see note on jaw length) FAQ What measuring range does this caliper cover? The M201.335.2 workshop vernier caliper covers a measuring range of 0–500 mm, making it suitable for medium‑format workshop measurements. What resolution and readouts are available? The instrument provides a metric resolution of 0.05 mm on the lower vernier and an imperial readout of 1/128" on the upper scale, as specified for the M201.335.2 caliper. Is the caliper suitable for heavy workshop use? Yes; the M201.335.2 features a monoblock profile and hardened stainless steel construction designed for robust shop‑floor handling. How does the fine‑adjustment help during measurement? The fine‑adjustment thumbwheel permits controlled closing of the jaws for repeatable contact pressure and reduced operator influence on readings when using the M201.335.2. Which standards govern this instrument? The caliper is produced with reference to DIN 862; for the 250 mm jaw length the instrument is supplied to the manufacturer's standard as indicated. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Caliper Without Jaw Tip For External, Internal And Step Measurement, 0.02mm Scale, Fine Adjustment, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of a robust hardened stainless steel construction and a 0–500 mm measuring range to bridge bench work and larger assembly checks with consistent repeatability; the built‑in fine‑adjustment screw and precise vernier reading ensure reliable, reproducible results across external, internal and step measurements. Order the M201.315 directly via Metav Werkzeuge or consult our specialists for specification matching. M201.315 Workshop Caliper — analogue vernier, 0–500 mm, 0.02 mm The M201.315 is an analogue workshop caliper designed for medium‑range measuring tasks in metalworking and assembly environments, suitable for external, internal and step measurements where mechanical stability and readable precision are essential. Hardened stainless steel with matt‑chrome scale Precise vernier: 1/50 mm (0.02 mm) resolution Fine‑adjustment screw for gentle, exact closing Delivered in a transport case for safe handling Reliable medium‑range performance for workshop workflows This caliper covers a 0–500 mm measuring span, placing it in the medium category that balances reach and stiffness for everyday machine‑shop use. The monoblock construction reduces flex and improves repeatability when measuring larger fixtures, housings or workpieces compared with shorter, less rigid tools. The hardened stainless steel body and matt‑chrome scale resist wear and reduce reflection under bright workshop lighting, so the scale remains legible over long service intervals. These characteristics translate directly into fewer rechecks and more consistent production throughput. Readable, mechanical accuracy without electronics As an analogue vernier instrument, this caliper provides a tactile, battery‑free measurement method appreciated for its reliability in harsh or oil‑contaminated environments. The vernier system offers a 1/50 mm (0.02 mm) reading step on the metric scale and an imperial scale of 1/1000 inch for cross‑reference; this combination supports mixed‑unit documentation without the need for conversion tools. The tool conforms to the factory Werksnorm, giving a predictable baseline for in‑house quality procedures and routine checks, while the fine resolution suits careful workshop quality control where mechanical accuracy is expected. Designed for precise handling in daily use Ergonomics and fine control are central to the caliper’s design: a dedicated fine‑adjustment screw makes incremental closing smooth and prevents overshoot when setting jaws on delicate surfaces. The 150 mm jaw length provides ample contact area for stable external measurements, while the slender jaw tips allow confident internal and step measurements. Supplied in a dedicated transport case, the instrument is protected during storage and transit, reducing the risk of shock or corrosion that can compromise a workshop’s measurement standard. For teams standardising measurement tools across benches, this caliper offers straightforward handling and consistent results. Built for durability and practical workshop standards The combination of a hardened stainless steel frame, matt‑chrome graduation and monoblock design keeps maintenance demands low and service life high, supporting continuous shop use. The caliper’s capability for external, internal and step measurement consolidates three common functions in one robust instrument, reducing tool changes and saving time between operations. Supplied under the Werksnorm production standard and distributed through Metav IndustryLine, the instrument suits workshops that require dependable, no‑frills measuring equipment that performs under daily service conditions. Contact Metav Werkzeuge today to discuss specification matching, ordering and delivery of the Metav IndustryLine M201.315 workshop caliper, supplied with transport case and factory standard documentation. Technical Data Article number: M201.315 GTIN: 4054469101347 Brand: Metav IndustryLine Type: Analogue vernier caliper Facts Measuring range: 0–500 mm Resolution: 0.02 mm Vernier scales: 1/50 mm and 1/1000 inch Jaw length: 150 mm Tariff number: 90173000 Special features Material: stainless steel, hardened; matt‑chrome scale Monoblock construction Fine‑adjustment screw Suitable for external, internal and step measurements Delivery in transport case Factory standard: Werksnorm FAQ How precise is the caliper for workshop checks? The M201.315 provides a mechanical reading step of 0.02 mm via its vernier scale (1/50 mm), placing it in the high‑precision bracket for analogue calipers used in machine‑shop quality checks. Can the caliper measure internal and step dimensions as well as external ones? Yes; the design supports external, internal and step measurements, making the tool versatile for common workshop tasks without the need for multiple instruments. Is the instrument supplied ready for use or does it require initial calibration? The instrument is supplied to Werksnorm (factory standard). If a specific accredited calibration certificate is required, please discuss options with Metav Werkzeuge prior to purchase. What makes the caliper suitable for daily shop use? Durable hardened stainless steel, a monoblock frame and a fine‑adjustment screw combine to deliver stable, repeatable contact and easy handling under routine workshop conditions. Does the delivery include protection for transport and storage? The caliper is supplied in a dedicated transport case, which protects the measuring faces and scale during shipment and storage, reducing the risk of damage and preserving accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Caliper Without Point 250mm Jaws 0.05mm Vernier Fine Adjustment Monoblock Stainless Steel Matt Chrome Scale, in Case - Metav IndustryLine
Take advantage of the combination of robust monoblock construction, precise fine adjustment and a 0–500 mm measuring range for reliable workshop measurement tasks; order the caliper directly via Metav Werkzeuge or consult the team for application advice. Workshop Vernier Caliper M201.325.2 — 0–500 mm range, hardened stainless steel (Metav IndustryLine) The Workshop Vernier Caliper M201.325.2 is an analogue caliper intended for medium‑range workshop measurements up to 500 mm, offering a rigid monoblock design and a fine‑adjustment mechanism for controlled, repeatable readings. Hardened stainless steel construction 0–500 mm measuring range Fine‑adjustment thumb screw Monoblock for high rigidity Reliable accuracy for everyday workshop control Built for frequent use, this analogue caliper combines a monoblock frame with hardened stainless steel to limit flex and wear during repeated handling. The vernier arrangement provides a clear 0.05 mm resolution, which aligns with common workshop tolerances and supports reliable go/no‑go decisions on the production floor. The fine adjustment ensures the jaws close smoothly, reducing overshoot and operator‑induced error; this makes the instrument particularly suitable where steady, reproducible contact is required without resorting to electronic instruments. Medium‑range capability for larger assemblies Classified in the Medium category (measuring range 300–500 mm), the caliper bridges the gap between compact gauges and long‑reach instruments. The 0–500 mm span and jaw length 250 mm allow secure contact on larger fixtures, housings and assemblies while keeping handling manageable for a single operator. Conformity to DIN 862 is observed for shorter jaw variants, and for the longer jaw geometry this unit is manufactured to the works standard to preserve reliable measuring characteristics across the full range. Practical features that speed daily workflows The analogue vernier includes a dual reading arrangement (top and bottom scales) that supports imperial and metric cross‑checks in workshops that still reference both systems. The matt‑chrome scale reduces glare under workshop lighting and supports fast reading, while the sturdy thumb screw fine‑adjustment offers micro‑control during closing and setting operations—translating directly into fewer remeasures and faster cycle times. The overall design prioritises robustness and serviceability, making it a pragmatic choice for production, maintenance and jobbing shops where straightforward, dependable measurement is required. Discuss the Metav IndustryLine caliper with Metav Werkzeuge for tailored advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M201.325.2 GTIN: 4054469101514 Brand: Metav IndustryLine Facts Measuring range: 0–500 mm Resolution: 0.05 mm Jaw length: 250 mm Vernier: 1/128" top; 1/20 mm bottom Special features Material: hardened stainless steel with matt‑chrome scale Monoblock construction Fine‑adjustment thumb screw Compliance: DIN 862 up to 200 mm; from 250 mm according to works standard Analogue vernier caliper for workshop use FAQ What measuring range does the caliper cover? The M201.325.2 caliper covers a 0–500 mm measuring range, placing it in the Medium category for workshop use. What resolution and reading increment does the instrument offer? Resolution is 0.05 mm, provided by the analogue vernier arrangement with dual scales for practical workshop readings. Is the caliper suitable for heavy everyday use? Yes. The monoblock construction and hardened stainless steel material are specified to withstand routine workshop handling and maintain dimensional stability. Does the caliper comply with recognised standards? The design follows DIN 862 for shorter jaw lengths; for the longer jaw geometry of this model, production is carried out to the manufacturer’s works standard to ensure consistent behaviour across the full range. How is fine positioning achieved during measurement? A dedicated fine‑adjustment thumb screw is integrated to allow controlled jaw movement and repeatable clamping pressure, reducing operator error during setting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Caliper Without Point Fine Adjustment Monoblock Stainless Steel 0.05mm Resolution DIN 862 - Metav IndustryLine
Reliable workshop precision meets robust construction: the combination of a hardened stainless steel monoblock frame, a fine-adjustment screw and a vernier readout with 0.05 mm resolution ensures stable, repeatable medium-range measurement. Order the caliper directly via Metav Werkzeuge or consult the technical advisors for specification matching. Workshop Vernier Caliper M201.325.1 — 0–500 mm, Monoblock, Fine Adjustment (Metav IndustryLine) The Workshop Vernier Caliper M201.325.1 is a medium-range measuring instrument designed for general machine‑shop use, offering a stiff monoblock frame and precise mechanical adjustment for reliable everyday inspection. Hardened stainless steel construction Precise fine-adjustment screw Monoblock frame for improved stiffness Vernier readout with 0.05 mm resolution Durable construction for consistent shop-floor performance The caliper’s hardened stainless steel body with a matt‑chromed scale is engineered to resist wear and minimise surface reflections, supporting long service life under regular workshop conditions. The monoblock design increases profile stiffness so that measurements remain stable across the full 0–500 mm range; this classifies the instrument as a medium-range caliper, which is particularly useful where reach and rigidity must be balanced. The integrated fine-adjustment mechanism allows controlled closing of the jaws for repeatable contact force and faster setup of routine checks. Mechanical accuracy explained for dependable results As an analogue vernier instrument, the caliper provides a reading accuracy determined by its vernier graduations: the lower scale corresponds to a metric vernier giving 0.05 mm increments, while a secondary vernier on the upper jaw runs to 1/128 inch for imperial reference. The instrument meets DIN 862 specifications for jaw lengths up to 200 mm; longer jaw versions from 250 mm are manufactured to the supplier’s factory standard. For workshop metrology this means straightforward, traceable readings from a robust mechanical instrument without reliance on electronics, making it ideal for environments where simplicity and serviceability matter. Practical handling, protection and lifecycle benefits The caliper is supplied as a ready-to-use workshop tool and is delivered in a transport case to protect the measuring faces during storage and transit. A jaw length of 200 mm provides practical access to a wide variety of components, while the overall mass and construction contribute to steady handling during measurement. The matt‑chromed scale eases visual reading and reduces glare under shop lighting; routine care—keeping the sliding surfaces clean and lightly oiled—maintains accuracy and extends service intervals. The combination of robust materials and mechanical fine adjustment supports efficient inspection routines and dependable repeatability on the shop floor. For precise medium-range measurement rely on Metav IndustryLine’s monoblock caliper; contact Metav Werkzeuge in Emmerich for product matching or ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.325.1 GTIN: 4054469101507 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 0–500 mm Max measuring range: 500 mm Jaw length: 200 mm Weight: 4.3 kg Resolution: 0.05 mm Design / Special features Material: hardened stainless steel, matt‑chromed scale Monoblock frame construction Fine‑adjustment screw Vernier scales: 1/128" (top) and 1/20 mm (bottom) Compliance: DIN 862 up to 200 mm; factory standard from 250 mm Supplied in a transport case Without pointed jaw tips Analogue (mechanical) vernier readout FAQ What measuring range does this caliper cover? The instrument covers a 0–500 mm span, placing it in the medium‑range category suitable for many machine‑shop and fixture tasks; product SKU: M201.325.1. What resolution and vernier graduations are provided? Resolution is 0.05 mm, derived from the metric vernier; the caliper also carries a secondary vernier of 1/128 inch for imperial reference. What is the caliper made from and how durable is it? The caliper is manufactured from hardened stainless steel with a matt‑chromed scale, offering corrosion resistance and wear durability for workshop use. Is a protective case included with delivery? Yes, the tool is supplied in a transport case to safeguard the measuring faces and sliding surfaces during storage and transport. Which environments and applications suit this caliper best? This monoblock, fine‑adjustment caliper is intended for general machine shop inspection, jig and fixture checking, and routine quality control where a robust, repeatable mechanical measurement is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Precision Caliper With Pointed Jaws, Fine Adjustment, Monoblock, 0.05mm - Metav IndustryLine
Take advantage of the combination of robust monoblock construction, a 500 mm measuring range and precise fine adjustment to secure reproducible workshop measurements; order directly via Metav Werkzeuge or consult the technical team for application guidance. Metav IndustryLine Workshop Caliper M201.335 — 500 mm, Fine Adjustment, Monoblock The M201.335 workshop caliper is an analogue vernier caliper designed for workshop use and medium-format component measurement, providing sturdy handling and metric/imperial vernier reading. 500 mm measuring range for larger assemblies Hardened stainless steel with matt chrome scale Precise fine-adjustment thumb screw Vernier dual-scale: 1/128" and 1/20 mm Robust measurement reach with controlled stiffness The caliper's 500 mm measuring range places it in the medium class for workshop calipers, offering the reach required for larger fixtures and housings while retaining manageable stiffness and handling. The monoblock frame reduces torsion and flex during measurement, translating the operator's movement into stable contact conditions. A hardened stainless-steel construction with a matt-chrome scale ensures long-term legibility and resistance to workshop environments, so measurements stay consistent over repeated use. Precise setting and readable vernier scales Equipped with a fine adjustment mechanism, the instrument enables controlled approach to the measuring faces for repeatable results, particularly useful when small positional changes matter. The analogue vernier combination provides both imperial and metric reference: a top scale at 1/128" and a bottom scale at 1/20 mm, yielding an effective nominal resolution of 0.05 mm. These characteristics make the caliper well suited to general machine‑shop tasks where robust, easily interpreted measurement data is required rather than laboratory-level submicron resolution. Workshop-oriented features that simplify handling The caliper is supplied with pointed measuring tips to aid access to grooves and recesses, while the 150 mm jaw length improves reach into deeper bores and steps without sacrificing control. Compliance with DIN 862 for the applicable jaw length confirms that the measuring faces and nonius meet recognised workshop standards for form and function. Delivery includes a protective case for transport, reducing the risk of damage in daily workshop use and supporting repeatable, reliable readings across the production chain. For reliable shop metrology and ordering information, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 for technical advice and supply options Technical data Article number: M201.335 GTIN: 4054469101736 Brand: Metav IndustryLine Measuring range: 0–500 mm Jaw length: 150 mm Resolution / vernier: 0.05 mm (1/20 mm) and 1/128" Material: stainless steel, hardened, matt-chrome scale Norm: DIN 862 (valid for the given jaw length) Facts Measuring range (numeric): 500 mm Jaw length (numeric): 150 mm Resolution (numeric): 0.05 mm Zolltarifnummer: 90173000 Special features Monoblock single-piece construction Fine-adjustment thumb screw Pointed measuring jaws for grooves and steps Analogue vernier (metric and imperial scales) Protective transport case included FAQ What measuring tasks are best suited to this caliper? The M201.335 workshop caliper from Metav IndustryLine is intended for medium‑format workshop tasks such as measuring housings, spacers and fixtures where a 500 mm reach and robust handling are required. Does the caliper meet recognised standards? Yes. The caliper's design and measuring faces conform to DIN 862 for the applicable jaw length, ensuring workshop‑grade tolerances and interchangeability. Which materials is the caliper suitable for inspecting? The caliper is a general‑purpose measuring tool for dimensional checks on metal and engineered components; material compatibility is determined by the inspection task rather than the caliper itself. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Brake Disc Gauge 80mm Jaw Matt Chrome Nonius 0.1mm, Stainless Steel - Metav IndustryLine
Take advantage of a compact, purpose-built inspection tool that combines stainless-steel durability, a 0–50 mm measuring range and an 80 mm jaw length for reliable brake-disc thickness checks; order directly via Metav Werkzeuge or consult our specialists for application advice. M201.182 Brake-disc Gauge — Analogue caliper with vernier 0.1 mm (Metav IndustryLine) The M201.182 Brake-disc Gauge is a compact analogue caliper engineered for quick, repeatable thickness checks on rotors and brake discs in workshop and maintenance settings Stainless-steel, matt chrome finish Vernier scale 0.1 mm resolution 0–50 mm range with 80 mm jaws Compact precision for routine inspection Built for compact, repeatable measurements, this analogue caliper delivers straightforward vernier reading at 0.1 mm and an indicated accuracy of 0.2 mm, making it suited to visual inspection and basic quality-control tasks. The tool’s stainless-steel construction and matt chrome finish resist workshop wear and light corrosion, so measurement geometry remains stable over frequent use. Classified within the micro-range (measuring capacity under 100 mm), it combines reach and stiffness appropriate for precise thickness checks without excess bulk, helping maintain production flow and reduce rework. Robust construction that supports uptime The caliper’s stainless build and solid jaw geometry provide tactile stability during clamping and reading, reducing operator-induced variation. With 80 mm jaws, it can bridge typical rotor profiles while keeping deformation minimal; this benefits repeatability on stepped surfaces. The analogue vernier system avoids battery dependence and simplifies field inspections, delivering a low-maintenance solution for service bays and maintenance shops. The result is a durable measuring instrument that supports continuous workshop operation with minimal downtime for upkeep. Ergonomic handling for faster checks Designed for rapid use, the tool’s compact frame and clear vernier layout speed up routine checks and assembly inspections. The non-slip finish and balanced jaw length permit confident one-handed control for fast pass/fail assessment during maintenance rounds. Supplied in a protective case for transport, it is ready for bench or mobile workshops and easy to store between shifts. For teams that prioritise straightforward, dependable instruments, this caliper reduces complexity while keeping measurement practice consistent. For practical, workshop-ready measuring tools and ordering support for the M201.182 Brake-disc Gauge, contact Metav Werkzeuge in Emmerich for tailored advice and procurement assistance Technical data Article number: M201.182 GTIN: 4054469100975 Material: stainless steel (INOX) Measuring range: 0–50 mm Jaw length: 80 mm Scale type: vernier (Nonius) 0.1 mm Type: analogue caliper Finish: matt chrome Tariff number: 90173000 Category: caliper / Messschieber eClass: 21170344 Packaging: supplied in protective case Facts Reading / resolution: 0.1 mm Indicated accuracy: 0.2 mm Measuring range min: 0 mm Measuring range max: 50 mm Jaw length: 80 mm Special features Analogue vernier scale Micro-range caliper (compact, high stiffness) Corrosion-resistant stainless-steel construction Matt chrome surface treatment Supplied in a transport case Suitable for routine brake-disc thickness checks FAQ Is this caliper suitable for measuring brake-disc thickness? Yes. The M201.182 brake-disc gauge is designed for rotor and disc thickness inspections within a 0–50 mm range and is suitable for routine workshop checks. What resolution and accuracy does the instrument offer? The instrument uses a vernier scale with a resolution of 0.1 mm and an indicated accuracy of 0.2 mm, providing reliable readings for standard maintenance and inspection tasks. Is the measuring tool corrosion-resistant? The caliper is manufactured from stainless steel with a matt chrome finish, offering enhanced resistance to workshop environments and extended service life. Does the product include a case for transport? Yes. The gauge is supplied in a protective case suitable for transport and storage, ensuring the instrument remains protected between uses. Can this analogue caliper replace digital gauges in a workshop? For basic thickness checks and quick pass/fail inspections, the M201.182 analogue gauge provides a low-maintenance, battery-free alternative that is robust and simple to use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Brake Disc Gauge Three-Point, Stainless Steel Matt Chrome Vernier 0.1mm, Supplied in Case - Metav IndustryLine
Benefit from a robust stainless-steel build, a 0–50 mm measuring range with Vernier 0.1 mm reading, and a protective transport case for secure handling. Combine reliable mechanical measuring performance and workshop-ready durability for consistent inspection results. Order the brake-disc gauge directly via Metav Werkzeuge or consult our specialists for technical advice. M201.180 Brake-disc gauge (stainless steel, Vernier 0.1 mm) — Metav IndustryLine The M201.180 Brake-disc gauge is a compact mechanical caliper designed for quick thickness and run‑out checks on small brake discs and rotors in workshop and inspection environments. Robust stainless steel construction Vernier scale, 0.1 mm resolution Measuring range 0–50 mm Delivered in protective transport case Reliable readings for routine inspection tasks The caliper delivers a practical combination of precision and simplicity: a Vernier scale with 0.1 mm reading ensures repeatable measurements for everyday quality checks, while an industrial accuracy class of 0.2 mm provides a trustworthy error margin for workshop inspection. Its compact measuring span of 0–50 mm makes it especially suitable where short-range checks are frequent, for example assessing disc thickness or checking minimal run‑out on rotors. The mechanical design avoids electronic dependencies and is therefore resilient to harsh shop-floor conditions. Built to withstand workshop use and protect the instrument Constructed from stainless steel (INOX) with a matte chrome finish, the gauge resists corrosion and maintains dimensional stability under regular handling. A 50 mm jaw length offers sufficient contact area for disc edge and surface measurements while keeping the tool manoeuvrable in confined spaces. Delivery in a protective transport case reduces the risk of damage during storage or transit and keeps the caliper ready for immediate use. These characteristics combine to reduce downtime and help maintain measurement reliability across repeated checks. Practical tool for fast decision-making on the shop floor As an analog mechanical Vernier caliper, this inspection gauge provides tactile feedback and an intuitive readout that experienced technicians value for quick assessments. The instrument is optimised for brake-disc applications and similar rotating components where fast pass/fail decisions are needed. Its straightforward operation supports efficient process control and helps integrate measurements into established workshop routines without additional training or software. For teams prioritising robust, no-frills reliability, this gauge offers a dependable means to verify component condition during maintenance and assembly. For workshop-ready precision from Metav IndustryLine, request technical guidance or arrange delivery from Metav Werkzeuge at our Emmerich location via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M201.180 GTIN: 4054469100944 eClass: 21170344 Tariff number: 90173000 Facts Measuring range: 0–50 mm Resolution / reading: 0.1 mm Accuracy: 0.2 mm Jaw length: 50 mm Special features Material: stainless steel (INOX) Finish: matte chrome-plated Scale type: Vernier (nonius) Delivery: protective transport case Type: analog mechanical caliper FAQ What measurements can this gauge perform? The M201.180 brake-disc gauge performs external thickness checks and run‑out assessments across a 0–50 mm range using a Vernier scale for 0.1 mm reading. Is the instrument suitable for workshop use on vehicle brake discs? Yes, the caliper is designed for routine workshop inspections and is robust enough for repeated use on small brake discs and similar components. How is the gauge delivered to protect it during transport? Delivery includes a protective transport case to prevent damage and to keep the instrument ready for immediate use. Does the instrument require batteries or calibration equipment? The gauge is an analogue mechanical Vernier caliper and does not require batteries; calibration information is available on request from Metav Werkzeuge. Can the caliper measure internal features as well as external thickness? The mechanical design allows standard external and internal checks appropriate to the specified measuring range for inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Tyre Tread Gauge Brass 0.1mm Reading, Analog Vernier - Metav IndustryLine
Compact brass construction, a 50 mm measuring range and a 0.1 mm vernier deliver fast, repeatable tyre-profile checks for routine inspections; order the Brass tyre tread gauge M204.021 directly via Metav Werkzeuge or consult our advisors for help sourcing the right tool. Brass tyre tread gauge M204.021 — compact analogue gauge, 50 mm range, 0.1 mm graduation (Metav IndustryLine) Brass tyre tread gauge M204.021 provides a straightforward solution for quick tread depth checks and small-scale profile measurements in workshops and inspection bays. Compact brass body for corrosion resistance 50 mm measuring range for tyre profiles 0.1 mm vernier reading for quick checks Lightweight at approx. 50 g for handheld use Accurate, compact measurement where it matters The M204.021 is built as a compact, analogue vernier instrument that prioritises straightforward, verifiable readings. With a 0.1 mm graduation and a 50 mm range, it fits the micro category of measuring tools (suitable for measuring ranges up to 100 mm), offering a balance of reach and rigidity ideal for small-scale inspections. The brass body resists corrosion and provides stable contact with the measured surface, which supports repeatability when taking successive readings on tyre treads or small components. The vernier scale requires no power source and gives an immediate, mechanical confirmation of depth values for routine quality checks. Built for workshop use and low-maintenance handling A tool designed for frequent handling must be easy to operate and durable. The gauge’s lightweight build and compact jaws make it simple to position across curved tread blocks, while the brass construction reduces wear from grime and moisture commonly found in garage environments. The analogue design means there are no batteries or electronics to fail, and the vernier layout allows technicians to read values directly without interpretation software. For organised workflows, the instrument’s modest weight and size permit rapid transfer between inspection points, supporting faster throughput in service lanes and QC benches. Practical integration into inspection routines As a tactile measuring device, the gauge complements visual inspection by providing numeric confirmation of tread depth and profile variation. The 50 mm range covers typical tyre profile depths and localised measurements across blocks, while the 0.1 mm scale helps document compliance with service specifications or local regulations. Using the gauge alongside a written or digital checklist enables traceable records for maintenance logs. For teams requiring clear, rapid checks rather than laboratory-level micro‑measurements, this instrument offers a pragmatic and efficient option that reduces downtime and streamlines acceptance criteria. Durable design with familiar operation and wide applicability The gauge’s straightforward mechanics make it suitable for technicians, workshop managers and inspection staff who need a reliable handheld instrument. Its construction from brass enhances longevity in everyday conditions and simplifies cleaning after contact with road grime or oils. The analogue format keeps training time short: users familiar with vernier scales can read and record measurements instantly. While compact, the instrument is robust enough for repeated use on vehicles, spare parts and small assemblies, making it a versatile addition to any service kit. For reliable, compact tread measurement choose Metav IndustryLine’s M204.021 — contact Metav Werkzeuge GmbH in Emmerich for procurement or technical advice: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: M204.021 GTIN: 4054469169033 Brand: Metav IndustryLine Facts Measuring range: 0–30 mm (max 30 mm) Reading / graduation: 0.1 mm (vernier) Weight: 0.05 kg Jaw / bridge width: 20 mm Tariff number: 90173000 Special features Material: brass Type: analogue vernier tread gauge Category: micro (compact measuring range up to 100 mm) Handheld, battery-free operation FAQ How is the tread depth read on this gauge? The gauge uses an analogue vernier scale with a 0.1 mm graduation; the measurement is read directly from the vernier against the main scale for immediate numeric values. Is this gauge suitable for automotive tyre inspections? Yes. The 50 mm range and compact jaw geometry are intended for tyre-profile checks and small localised depth measurements typical in vehicle service and inspection tasks. What material is the gauge made from and why does it matter? The gauge is manufactured from brass, selected for corrosion resistance and consistent contact behaviour, which helps maintain reliable readings over repeated use. Does the instrument require batteries or calibration on delivery? The device is fully mechanical and requires no batteries; calibration status is not specified for this item, so check individual product listings if a calibration certificate is required. Which category of calipers does this instrument belong to? With a maximum measuring range of 30 mm, the gauge falls into the micro category of compact measuring instruments, offering precise handling for small-scale measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Brake Drum Caliper 200mm Jaws Stainless Steel Three-Point Readings, Supplied in Case - Metav IndustryLine
Combine robust stainless-steel construction with a wide 600 mm external range and a precise analogue nonius for repeatable brake-drum and large-component checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Brake Drum Caliper M201.187 — 600 mm external range, INOX construction (Metav IndustryLine) The Brake Drum Caliper M201.187 is an analogue, large-format caliper engineered for internal and external measurement of brake drums and other wide components in workshop and industrial environments. Stainless-steel (INOX) construction 600 mm external measuring range 200 mm jaw length for deep grip Analogue nonius: 1/10 mm internal, 1/20 mm external Accurate large-range measuring where it matters The caliper is designed for tasks that require both reach and repeatability: the 600 mm external span and internal capability from 50–650 mm cover typical brake drums and comparable large parts. The analogue nonius provides clear graduations—1/10 mm for internal and 1/20 mm for external readings—permitting reliable manual measurement without dependency on electronics. This configuration reduces downtime in environments where ruggedness and simplicity are priorities and supports a steady production or maintenance flow through consistent, verifiable readings. Readings made straightforward with a familiar nonius An analogue scale remains a robust choice in busy workshops: the nonius layout on this caliper gives fast, intuitive readings and resists the environmental sensitivities of electronic devices. The separate resolutions for internal and external measurements allow technicians to select the most appropriate scale for the task, while the stated accuracy of 0.2 mm reflects the instrument’s practical tolerance for large-format checking. For users less familiar with nonius reading, the scale can be taught quickly and incorporated into standard inspection routines, improving throughput and reducing measurement uncertainty. Built for handling large components and secure clamping Constructed from stainless steel (INOX), the caliper resists corrosion in workshop atmospheres and delivers stable contact on wide surfaces. The 200 mm jaw length gives additional reach for deep bores and drum contours, while the integrated locking screw secures the slide for transfer measurements and datum retention. These features combine to reduce setup repetition and support reproducible checks on assemblies, fixtures or service items where firm, repeatable positioning matters most. Practical workshop integration and transport The instrument is optimised for heavy-duty workshop routines: the long jaw geometry and robust slide provide the stiffness needed for consistent results over the entire measuring length. Delivery includes a protective case to simplify storage and safe transport between the inspection bench and service bay. Classified as a large-range instrument (500–1,000 mm), it fills the niche between standard workshop calipers and specialised long-stroke gauges, making it a pragmatic choice for maintenance shops, inspection stations and toolrooms aiming to consolidate measuring capability. Contact Metav Werkzeuge for tailored advice on specifying the Metav IndustryLine Brake Drum Caliper M201.187 and to arrange procurement or technical clarification—phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M201.187 GTIN: 4054469101033 eCl@ss: 21170344 Tariff number: 90173000 Core specifications External measuring range: 600 mm Internal measuring range: 50–650 mm Jaw length: 200 mm Accuracy: 0.2 mm Scale type: Analogue nonius (internal 1/10 mm; external 1/20 mm) Features and materials Material: stainless steel (INOX) Locking screw: yes Delivery: supplied in protective case Category: caliper, large-range instrument Brand: Metav IndustryLine FAQ How large a component can be measured with this caliper? The Brake Drum Caliper M201.187 accommodates external measurements up to 600 mm and internal checks from 50–650 mm, making it suitable for most brake drums and similarly sized parts. What reading resolution does the instrument provide? The analogue nonius delivers 1/10 mm resolution for internal measurements and 1/20 mm for external measurements on the Metav IndustryLine Brake Drum Caliper M201.187. Is the caliper suitable for workshop environments? Yes. The caliper’s stainless-steel construction, robust slide and locking screw are designed for regular workshop use and transport in the supplied protective case. How repeatable are measurements with this caliper? With its large-format design and secure clamping, the instrument offers stable repeatability for heavy-duty checks; the stated accuracy is 0.2 mm for typical workshop applications. Which applications is this caliper intended for? The instrument is intended for brake-drum inspection, service measurements and large-component checks in maintenance, inspection and manufacturing environments; the long jaw and extended internal range support a wide variety of tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Caliper With Pointed Jaws 200mm Depth 0.05mm Vernier Fine Adjustment Monoblock Inox, DIN 862 Box - Metav IndustryLine
Take advantage of a sturdy 600 mm measuring range together with a monoblock, hardened stainless steel frame and precise 0.05 mm vernier measurement for dependable workshop results; order the caliper directly via Metav Werkzeuge or contact our consultants for application advice. M201.336.1 Workshop Caliper with Point — 600 mm measuring range, 0.05 mm vernier — Metav IndustryLine M201.336.1 is a robust workshop caliper designed for large-format measurements in mechanical workshops and toolrooms, combining a long measuring range with a hardened monoblock construction for repeatable results. 600 mm measuring range Monoblock hardened stainless steel Fine-adjustment thumbwheel Dual vernier (1/128" / 1/20 mm) Built for heavy workshop use and reproducible results The long-range design classifies this tool as a large-range caliper (measuring range up to 1,000 mm), making it suitable where profile stiffness and reach matter. The one-piece monoblock frame reduces torsion and improves rigidity compared with multi-part assemblies, which supports consistent measurements across the full 600 mm stroke. The body is manufactured from hardened stainless steel and the scale is matt-chrome finished to reduce glare; together these features increase longevity under daily workshop conditions and lower the risk of corrosion or wear that would affect repeatability. Clear, reliable readings for mixed metric and imperial workflows The mechanical vernier provides a practical 0.05 mm resolution, matching common workshop accuracy expectations and enabling rapid checks without electronics. A dual vernier layout—1/128" on the upper scale and 1/20 mm on the lower—facilitates work on projects that require both imperial and metric references, reducing conversion errors and saving time at the bench. The integrated fine-adjustment thumbwheel allows controlled approach when closing the jaws, improving alignment and reducing overshoot; this combination supports efficient inspection routines and shortens process times in production checks. Practical handling and measurement versatility Pointed jaws extend the caliper’s capability for localised or recessed features, while a 200 mm jaw length gives a secure contact area for larger parts. Compliance with DIN 862 for the specified jaw length confirms that form and tolerances meet recognised workshop standards. The tool is balanced for single-person operation despite its length: the fine-adjustment control and smooth slide action make measured motions deliberate and repeatable, providing confidence when checking assemblies, fittings or machining setups. Contact Metav Werkzeuge for tailored advice on applications that benefit from a 600 mm monoblock caliper — our specialists in Emmerich will recommend the right solution and arrange supply of the M201.336.1. Technical data Article number: M201.336.1 GTIN: 4054469101774 Manufacturer: Metav IndustryLine eCl@ss: 21170344 Facts Measuring range: 600 mm Jaw length: 200 mm Resolution: 0.05 mm Vernier: 1/128" (top) and 1/20 mm (bottom) Customs tariff number: 90173000 Special features Material: hardened stainless steel, matt-chrome scale Monoblock frame construction Fine-adjustment thumbwheel Pointed jaws for localised contact DIN 862 (applicable for the stated jaw length) FAQ How accurate is the caliper for routine workshop checks? The M201.336.1 provides a mechanical resolution of 0.05 mm, which corresponds to standard industrial workshop practice and is well suited to general measurement and quality-control tasks. Can the vernier be used for imperial and metric readings? Yes; the caliper features a dual vernier—1/128" on the upper scale and 1/20 mm on the lower—so the M201.336.1 can be read directly in either system without on-the-fly conversions. Is the caliper suitable for larger components and assemblies? With a 600 mm measuring range the instrument is classified as a large-range caliper and is intended for larger components where reach and profile stiffness are required. Does the caliper meet recognised workshop standards? For the specified jaw length, the M201.336.1 conforms to DIN 862 requirements, ensuring consistent geometric and dimensional characteristics expected in professional environments. What practical advantages does the monoblock design give in everyday use? The monoblock frame reduces flex under load and improves stability over long spans; combined with the fine-adjustment thumbwheel, this leads to more reproducible contact positioning and fewer re-measures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Caliper With Pointed Jaws Fine Adjustment Monoblock 0.05mm, Hardened Stainless Steel, Case - Metav IndustryLine
Take advantage of robust monoblock construction, hardened stainless steel and precise fine adjustment to secure repeatable measurements across a 600 mm range; order the workshop caliper directly via Metav Werkzeuge or consult our technical advisors for application advice. Metav IndustryLine Workshop Caliper M201.336.2 — 600 mm range, fine adjustment The Metav IndustryLine Workshop Caliper M201.336.2 is a heavy‑duty, analogue monoblock caliper with a 600 mm measuring range, engineered for large workshop and machine‑building measurement tasks. 600 mm measuring range Hardened stainless steel construction Fine adjustment mechanism Dual vernier for precise readout Built for robust, long‑range workshop measurement The large‑format design places this instrument in the 500–1,000 mm class of calipers, where profile stiffness and repeatability over the entire length are essential. The monoblock frame minimises play and torsion, so measurements remain stable when handling larger workpieces such as fixtures, housings or long shafts. The hardened stainless steel body with a matt‑chromed scale protects the scale against wear while keeping contrast high for clear readings in busy workshop conditions. Precise analogue reading with vernier and fine feed The instrument combines a traditional vernier readout with a fine adjustment for controlled closing and repeatable positioning. The calibrated resolution of 0.05 mm supports reliable dimensional checks in routine production and maintenance. The vernier arrangement (dual scales) provides quick cross‑checks and familiar operation for technicians accustomed to mechanical callipers, while the fine feed reduces the risk of overshoot on delicate surfaces. Practical handling and measurement versatility Equipped for external, internal and step measurements, the device features pointed tips to reach narrow recesses and a jaw geometry suited to varied workshop tasks. The ergonomic slider and locking option maintain the set reading during transfer between stations, aiding workflow in busy shops. Compliance with DIN 862 for applicable jaw lengths ensures the caliper meets recognised mechanical measuring conventions; where jaw dimensions exceed standard limits, factory specifications apply. Application focus and quality of delivery This analogue caliper is directed at machine shops, toolrooms and maintenance departments that require a resilient instrument for larger components. The combination of a long measuring range, monoblock rigidity and hardened stainless construction makes it a solid choice where durability and repeatable results matter. For commissioning into inspection routines, the instrument integrates easily with existing quality processes thanks to its conventional operation and clear scale. Contact Metav Werkzeuge today to specify the Metav IndustryLine Workshop Caliper M201.336.2 for large‑format measurement tasks — our Emmerich team will advise on suitability and delivery to your site Technical data Article number: M201.336.2 GTIN: 4054469101781 ECLASS: 21170344 Tariff number: 90173000 Facts Measuring range: 0–600 mm Jaw length: 300 mm Resolution: 0.05 mm Analog instrument with vernier scales Special features Material: hardened stainless steel, matt‑chromed scale Monoblock design for increased stiffness Fine adjustment mechanism included Pointed tips for narrow recesses Norm: DIN 862 for specified jaw lengths FAQ What measuring tasks is this caliper best suited for? The Metav IndustryLine Workshop Caliper M201.336.2 is designed for workshop and machine‑building tasks that require a long measuring range and robust construction, such as checking housings, fixtures and long shafts. How precise is the vernier on this caliper? The analogue vernier offers a resolution of 0.05 mm and a dual‑scale arrangement that supports reliable repeatable readings for standard workshop quality control. Is the caliper suitable for internal and step measurements? Yes, the instrument supports external, internal and step measurements and is equipped with pointed tips to reach narrower features. Does the caliper comply with recognised standards? The caliper follows DIN 862 for applicable jaw lengths; for larger jaw configurations the device is supplied according to factory specifications. What materials and finish does the caliper feature? Constructed from hardened stainless steel with a matt‑chromed scale, the caliper is built for durability and high contrast in industrial environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Hier wird noch anderes html hinkommen um das wir uns später kümmern