messschieber beschriftung
Das hier ist der erste PLatzhalter
1000mm Depth Gauge 250mm Base 0.05mm Vernier Stainless Steel DIN 862 In Plastic Case - Metav IndustryLine
Take advantage of a 1000 mm measuring range, 0.05 mm vernier resolution and robust stainless‑steel construction for reliable depth checks on large components; order the depth gauge directly via Metav Werkzeuge or ask our consultants if needed. Depth Gauge M204.096 — 1000 mm analogue depth gauge, stainless steel, DIN 862 (Metav IndustryLine) The Depth Gauge M204.096 is an analogue long‑reach depth gauge designed for large-format depth measurements in workshop and heavy‑machining environments. 1000 mm measuring range for large components 0.05 mm vernier resolution to DIN 862 Stainless steel body with matt‑chrome scale Locking screw for repeatable measurements Precision where reach matters The long measuring span of 1000 mm places this instrument in the large‑range category (500–1,000 mm), making it suitable for depth measurements on heavy fixtures, housings and large workpieces. The 1/20 mm vernier (0.05 mm) delivers industrial‑standard analogue accuracy, providing a clear, verifiable basis for quality control tasks where digital devices are not required. Compliance with DIN 862 ensures that measurement practice and scale layout conform to recognised workshop standards, reducing uncertainty in routine inspection tasks. Built for durable use in production environments Constructed from stainless steel with a matt‑chrome scale and vernier, the gauge resists corrosion and wear in demanding shop conditions. The robust slide and the included locking screw secure the setting for repeatable measurements, which reduces rework and speeds up measurement cycles. Together, these mechanical design choices help maintain measurement stability across repeated use, supporting steady throughput in machining and assembly operations. Clear handling for efficient workflows As an analogue depth instrument, the gauge combines simple operation with dependable results: the engraved scale and vernier allow quick reading without reliance on batteries or electronics, which is an advantage in continuous production or field use. The substantial bridge length of 250 mm supports stable contact and reduces tilting during measurement, improving reproducibility for deep or awkward access points. The instrument’s format is therefore tailored for technicians who prioritise straightforward, robust measuring tools. Practical integration into workshop routines The instrument is conceived for workshop and metalworking environments where long reach and dependable mechanical performance are required. Its analogue nature makes it straightforward to maintain and to teach as part of standard measuring routines. The compact vernier resolution and DIN conformity mean that measurements can be documented and compared across shifts and suppliers, supporting traceable quality control without complex setup or software dependencies. Choose Metav IndustryLine’s M204.096 depth gauge for dependable large‑range depth checks and contact Metav Werkzeuge for tailored technical advice and prompt dispatch from Emmerich. Technical data Article number: M204.096 GTIN: 4054469102795 eClass: 21170349 Tariff code: 90173000 Standard: DIN 862 Facts Measuring range: 0–1000 mm Resolution / vernier: 1/20 mm (0.05 mm) Bridge length: 250 mm Analogue instrument Special features Stainless steel construction Scale and vernier matt‑chrome plated Locking screw included Analogue depth gauge for large components FAQ What measuring range does this instrument cover? The M204.096 offers a measuring range of 0–1000 mm, placing it in the large‑range category suited to sizeable components and assemblies. How precise is the analogue reading? Resolution is 0.05 mm via the 1/20 mm vernier; this is the standard analogue accuracy for industrial mechanical depth gauges under DIN 862. Is the tool suitable for shopfloor use? Yes. The stainless‑steel body with matt‑chrome scale and the locking screw make the gauge robust and well suited to routine workshop measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Rod Caliper With Carbide Marking Tips Ø25x100 - Metav IndustryLine
Take advantage of the combination of a 1,000 mm measuring range, stainless steel durability and carbide scribing tips for reliable layout and marking across large components; order directly via Metav Werkzeuge or request tailored advice from our consultants. Beam compass M201.275 — 1,000 mm range, carbide scribing tips (Metav IndustryLine) A robust Beam compass M201.275 for precise scribing and layout on diameters up to 1,000 mm, made from stainless steel with hardened carbide tips for long service life. 1,000 mm measuring range Stainless steel construction Carbide scribing tips for longevity Ø25 x 100 mm tip geometry Accurate large-format marking that speeds production The long-beam design provides a stable platform for reproducible scribing across large diameters, classifying this instrument in the large-range (500–1,000 mm) category used for substantial components. With a 1,000 mm measuring range and a solid shaft geometry, the beam compass translates layout steps into consistent results, reducing rework and set-up time. The combination of mechanical rigidity and engineered tip geometry ensures clear, repeatable scribe lines on sheet, plate and profile materials, supporting faster downstream machining and inspection workflows. Robust construction for harsh workshop use Constructed from stainless steel (INOX) and fitted with carbide scribing tips, the instrument resists corrosion and tip wear in everyday shop conditions. The relatively substantial shaft diameter contributes to stability during use; the tip geometry of Ø25 x 100 mm provides a secure contact area that minimises deflection and preserves edge definition. These properties extend service intervals and reduce maintenance downtime, so layout operations remain dependable even under frequent use. Simple handling and flexible integration in the workshop Operated mechanically and free of electronics, the analogue beam compass is straightforward to set up for scribing, transferring centre points and marking radii. It is compatible with caliper-based arrangements for larger assemblies, indicated as suitable for diameters up to 2,000 mm in combined measuring setups. The instrument’s mass and geometry make two-person handling easier for the largest tasks while maintaining the manual control craftsmen value for fine adjustments. Clear, mechanical operation supports traceable procedures and fits established workshop routines without the need for additional training. For dependable large-diameter scribing and layout, contact Metav Werkzeuge in Emmerich for technical advice or a tailored quotation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.275 GTIN: 4054469182766 Device type: analogue beam compass Measuring range: 0–1,000 mm Weight: 3 kg Shaft diameter: 19 mm Tip geometry: Ø25 x 100 mm Material: stainless steel (INOX) Special feature: carbide scribing tips (HM) Suitable for combined caliper setups up to diameters of 2,000 mm FAQ What materials can be scribed with this beam compass? The beam compass M201.275 is equipped with carbide scribing tips, making it suitable for scribing common workshop materials such as steel, stainless steel and non-ferrous metals; tip wear will depend on the specific substrate and usage. How does the accuracy compare for large diameters? For large-format marking the mechanical rigidity and Ø25 x 100 mm tip geometry deliver improved repeatability and reduced deflection; the design prioritises stable contact and consistent line definition across the full 1,000 mm range. Is the instrument supplied calibrated? This analogue beam compass is a mechanical layout tool; calibration practice varies by product batch—please refer to the accompanying documentation for any supplied calibration certificate where applicable. Can the tips be replaced if they wear? The carbide scribing tips are designed for durability and can be replaced; replacement intervals depend on application and material hardness, and replacement parts follow the original tip geometry for consistent results. Which workshop tasks is this instrument best suited for? The beam compass is ideal for marking and scribing large diameters, laying out profiles and transferring radii in fabrication, fixture and heavy machining shops where a robust, analogue solution is preferred. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper 0.05mm Resolution Monoblock Fine Adjustment Stainless Steel Matt Chrome Scale 200mm Jaws In Case - Metav IndustryLine
Take advantage of the long 0–1000 mm reach together with a hardened stainless steel monoblock frame and a fine-adjustment screw for repeatable workshop measurements; order the workshop caliper directly via Metav Werkzeuge or ask our consultants if further guidance is required. Metav IndustryLine Workshop Caliper M201.329.3 — 0–1000 mm, Monoblock, Hardened Stainless The Metav IndustryLine M201.329.3 is a workshop caliper engineered for long-range dimensional checks on larger components in metalworking and fabrication environments. 0–1000 mm measuring range Hardened stainless steel, matt-chromed scale Monoblock construction for stability Fine-adjustment screw for precise setting Precision where long reach matters This caliper provides a 0–1000 mm measuring range combined with an analog resolution of 0.05 mm, which corresponds to the industrial mechanical standard for workshop vernier calipers. The scaled vernier (1/128" on the upper scale, 1/20 mm on the lower) enables clear interpolation without electronics, while the adherence to DIN 862 for the specified jaw configuration ensures traceable dimensional practice. The practical benefit is the ability to measure large castings, assemblies and fabricated parts with consistent repeatability and clear, immediate readings. Built for workshop robustness and longevity A single-piece monoblock frame and hardened stainless steel construction give the instrument high stiffness and corrosion resistance, reducing wear over routine use. The matt-chromed scale lowers glare for reliable reading under workshop lighting and protects the graduation from premature abrasion. For heavy-use environments this translates to fewer replacement cycles and steady measurement performance across extended production runs. Comfort and control for reliable measurements The integrated fine-adjustment screw simplifies small positional corrections and speeds up the setting process on long jaws, improving throughput on repetitive checks. The generous 200 mm jaw length supports firm contact on larger surfaces, and the robust vernier layout is optimised for tactile handling in workshop conditions. Together these features reduce operator-induced variability and make the measuring task both faster and more dependable. Practical applications and care Intended for the large-format range in fabrication, jig making and heavy machining, this caliper is suited to dimensional checks on fixtures, housings and spindles where reach and stability are decisive. Being an analogue instrument with mechanical graduation, routine cleaning and occasional lubrication of the guide surfaces preserve accuracy; the hardened surfaces require minimal maintenance but benefit from dry storage to avoid surface deposits. Metav’s role as a precision partner ensures reliable supply and consistent quality for industrial users seeking durable measurement tools. Contact Metav Werkzeuge for tailored procurement advice and to discuss the suitability of the Metav IndustryLine workshop caliper M201.329.3 for specific large-workshop applications Technical data Article number: M201.329.3 GTIN: 4054469101620 Brand: Metav IndustryLine Category: Messschieber (calipers) Facts Measuring range: 0–1000 mm Resolution: 0.05 mm Jaw length: 200 mm Analog vernier: 1/128" (upper) and 1/20 mm (lower) Norm: DIN 862 (applies for jaw length up to 200 mm) Special features Monoblock construction Hardened stainless steel body Matt-chromed scale Fine-adjustment screw Supplied without pointed tips FAQ What measuring range does this caliper cover? The caliper covers a 0–1000 mm range, making the Metav IndustryLine M201.329.3 suitable for long-reach workshop measurements. How precise is the reading on this instrument? The vernier caliper provides a mechanical resolution of 0.05 mm, which is the industrial standard for analogue workshop calipers. Is the instrument suitable for heavy workshop use? Yes, the monoblock frame and hardened stainless-steel construction of the M201.329.3 are designed for robust, repeatable use in fabrication and machining environments. Which standards apply to this caliper? The caliper complies with DIN 862 for the stated jaw configuration, ensuring compatibility with standard mechanical measuring procedures. What care does the caliper require to maintain accuracy? Regular cleaning of guide surfaces, occasional light lubrication and dry storage will preserve the graduation and movement; the hardened finish reduces the need for frequent servicing. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper 500mm Jaws 0.05mm Vernier Stainless Steel Fine Adjustment Monoblock - Metav IndustryLine
Take advantage of the combination of robust monoblock construction, a wide 0–1000 mm measuring range and the precise fine-adjustment thumbwheel for repeatable large-format checks; order directly via Metav Werkzeuge or ask the consultants for tailored advice. M201.329.2 Workshop Caliper — Monoblock, 0–1000 mm Range M201.329.2 is a heavy-duty monoblock workshop caliper designed for large-format measurement tasks where rigidity and repeatability matter most 0–1000 mm measuring range Monoblock, heavy-duty construction Fine-adjustment thumbwheel for precise setting Hardened stainless steel, matt-chromed scale Reliable large-range measurement for heavy components The monoblock design provides a rigid measuring beam that reduces deflection across the full 0–1000 mm travel, making the instrument suitable for repetitive checks on large components. The combination of a long jaw length and robust construction delivers improved measurement stability compared with short‑span tools, which translates into fewer re‑measures and more efficient production flow. The analogue vernier arrangement is engineered for workshop durability while still allowing precise readout where digital systems are not required. Durable materials and controlled positioning for consistent results Constructed from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and keeps scale contrast high under workshop lighting, aiding fast visual readings. The integrated fine-adjustment thumbwheel lets operators micro‑position the jaws without backlash, which reduces time lost to repeat alignment and improves first‑time acceptance rates. The vernier configuration provides a practical resolution of 0.05 mm, combining traditional mechanical reliability with the tactile control expected in heavy‑duty metrology. Designed for workshop workflows and straightforward handling The instrument’s build reflects the needs of machining and workshop environments: a stable beam, clear vernier graduations and a measured mass that aids controlled handling. This caliper is particularly appropriate where a robust analogue device is preferred for its simplicity and low maintenance overhead. Maintenance routines remain straightforward thanks to the corrosion‑resistant finish and solid construction, supporting long service intervals and dependable inspection routines on large assemblies. Practical benefits for procurement and inspection routines Choosing this monoblock caliper supports stronger process control: stable measurements over a long range reduce cumulative tolerance issues in assembly, while the fine‑adjustment control speeds up set‑up and reduces operator variability. The instrument’s specification aligns with workshop expectations for repeatable performance and long‑term durability, helping to keep production bottlenecks and rework to a minimum. Contact Metav Werkzeuge for expert advice on the Metav IndustryLine monoblock caliper and to arrange supply from our Emmerich centre — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M201.329.2 GTIN: 4054469101613 eClass: 21170344 Tariff number: 90173000 Norm: DIN 862 (up to jaw length 200 mm; from 250 mm per factory standard) Facts Measuring range: 0–1000 mm Jaw length: 500 mm Vernier / resolution: 1/20 mm (0.05 mm) lower; 1/128" upper Mass: 22 kg Special features Monoblock construction Fine-adjustment thumbwheel Hardened stainless steel with matt-chromed scale Analogue vernier display Supplied without pointed tips FAQ What measuring range does this caliper cover? The caliper covers a 0–1000 mm measuring range, making it a large‑range instrument suited to sizeable workshop components. What resolution and vernier specification does the instrument offer? The analogue vernier provides a practical resolution of 0.05 mm (lower scale 1/20 mm) and an additional 1/128" upper vernier for inch references. Which material is used for the scale and body? The body is made from hardened stainless steel with a matt‑chromed scale, which enhances corrosion resistance and legibility in workshop conditions. Is the caliper designed for heavy‑duty workshop use? Yes, the M201.329.2 is built as a heavy‑duty monoblock caliper intended for robust, repeatable measurements across long spans. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With 300mm Jaws, 0.05mm Resolution, Stainless Hardened Monoblock With Fine Adjustment, In Case - Metav IndustryLine
Take advantage of the combination of a monoblock design, hardened stainless steel construction and a fine‑adjustment drive for consistent, reproducible workshop measurements up to 1,000 mm; order the M201.339.2 directly via Metav Werkzeuge or consult the technical advisers for application support. M201.339.2 Workshop caliper with tips (Monoblock, 1,000 mm range) — Metav IndustryLine The M201.339.2 workshop caliper with tips is a robust monoblock caliper intended for workshop and toolroom use, offering long‑range measurement capability and durable construction for repetitive dimensional checks on large components. Monoblock construction for increased rigidity Hardened stainless steel with matt chrome scale Fine‑adjustment drive for precise positioning 1,000 mm measuring range with 300 mm jaws Reliable long‑range accuracy through rigid construction The monoblock frame and hardened stainless steel body provide a stable measuring platform that reduces bending and torsion during handling, which directly improves measurement repeatability. For workshop environments that demand long‑span checks, the rigid design translates into reproducible results and fewer rechecks, supporting efficient production workflows. The extended measuring range up to 1,000 mm enables inspection of large assemblies without the need for improvised fixtures. Precise setting and readable analogue scale for rapid checks Equipped with a fine‑adjustment drive, the caliper simplifies exact positioning of the jaws, making it quicker to reach and lock target dimensions with minimal overshoot. The dual vernier arrangement offers an imperial reference at 1/128" and a metric vernier that corresponds to 0.05 mm, allowing straightforward reading for standard workshop tolerances. This analogue configuration suits environments where a tactile feel and direct scale interpretation are preferable to electronic readouts. Designed for practical workshop applications and extended jaws The long 300 mm jaws increase engagement depth for profiles and stepped areas, so measurements of recessed features and broader surfaces can be carried out with greater confidence. Note that dimensional conformity follows DIN 862 for shorter jaw configurations; for this jaw length the caliper is produced to the factory standard that ensures the required stiffness and usability for larger components. The result is a favourable compromise between reach and handling in everyday machine‑shop operations. Robust finish and low‑maintenance operation for everyday use A matt‑chrome scaled surface reduces reflection under bright workshop lighting, improving legibility of the vernier marks and reducing operator fatigue during repetitive measuring tasks. As an analogue instrument with straightforward mechanics and a monoblock layout, the tool is easy to maintain and repair in‑house, providing long service life and dependable performance for inspection routines and set‑up work. The overall design supports a pragmatic approach to precision without reliance on electronics. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine M201.339.2 workshop caliper into production processes or for assistance selecting the right measuring solution for specific component geometries Technical Data Article number: M201.339.2 GTIN: 4054469101859 ECLASS: 21170344 TARIC/HS code: 90173000 Facts Measuring range: 1,000 mm Jaw length: 300 mm Metric vernier resolution: 0.05 mm Imperial vernier: 1/128" Special features Monoblock construction Fine‑adjustment drive Hardened stainless steel body Matt‑chrome scale Analogue/vernier format Conforms to DIN 862 for short jaws; factory standard for 300 mm jaws Supplied with tips for special contact geometry FAQ How accurate is the caliper for routine workshop checks? The M201.339.2 workshop caliper provides an analogue metric resolution of 0.05 mm via the vernier, which corresponds to standard industrial accuracy for mechanical vernier calipers and is suited to typical machine‑shop inspections. Can the instrument measure both imperial and metric dimensions? Yes, the caliper includes a dual vernier arrangement with an imperial reference at 1/128" and a metric vernier for 0.05 mm reading, enabling straightforward use across different drawing conventions. Is the caliper suitable for measuring large components and assemblies? The monoblock frame and 1,000 mm measuring range make this caliper appropriate for larger workpieces; the 300 mm jaw length increases engagement depth for stepped and recessed features. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With 300mm Jaws, 0.05mm Resolution, Stainless Hardened Scale, Fine Adjustment, Monoblock, Supplied In Case - Metav IndustryLine
Take advantage of the monoblock construction, hardened stainless steel and the integrated fine‑adjustment screw to secure reproducible measurements across large components; the substantial 0–1000 mm range supports heavy‑duty workshop tasks while the delivery in a protective case simplifies transport. Order the workshop caliper directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Workshop Caliper M201.329.1 — 0–1000 mm, hardened stainless, fine adjust The Metav IndustryLine Workshop Caliper M201.329.1 is a robust analogue caliper designed for heavy‑duty workshop measurement tasks where long reach and mechanical rigidity are required. Monoblock construction for maximum stiffness Hardened stainless steel with matt‑chrome scale Fine‑adjustment screw for controlled setting 0–1000 mm range for large components Built to stay true on large measurements The monoblock frame and hardened stainless steel construction provide a rigid measuring backbone that reduces bending and wear during repetitive tasks. With a measuring range of 0–1000 mm, this instrument falls into the heavy‑duty workshop category and is intended for larger workpieces where profile stiffness matters; the 300 mm jaw length extends reach for deep bores and recesses without compromising handling. Delivered in a protective case for safe transport, the caliper is engineered to remain serviceable in daily industrial use, lowering downtime and ensuring consistent results across production batches. Practical analogue precision with fine control The analogue vernier offers a readable scale division of 0.05 mm, combined with a vernier specification of 1/128" (top) and 1/20 mm (bottom) to support quick, reliable readings. The integrated fine‑adjustment screw enables controlled approach and exact positioning, ideal for repeated set‑ups or when gradual contact is necessary. Conformity to DIN 862 applies for shorter measuring jaws; for the longer 300 mm jaw the instrument follows the manufacturer's norm while maintaining the robustness expected in workshop metrology. The mechanical design requires no batteries, making it a dependable tool for on‑bench inspection and shopfloor verification. Practical fit within workshop metrology routines As part of a complete workshop toolkit, this analogue caliper is a straightforward instrument for routine checks and calibration comparators. The heavy‑duty concept simplifies measurement of larger assemblies and reduces the need for multiple specialised gauges, supporting the Metav principle of democratised precision. Backed by Metav’s logistics and quality filtering from Emmerich, the caliper is intended to integrate into supply chains where reliability, repeatability and a clear parts‑handling concept are priorities. For selection advice or delivery details from Metav IndustryLine, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to ensure the caliper matches the workshop requirements. Technical data Article number: M201.329.1 GTIN: 4054469101606 Category: Workshop caliper Facts Measuring range: 0–1000 mm Jaw length: 300 mm Scale division / resolution: 0.05 mm Vernier: 1/128" (top) and 1/20 mm (bottom) Nonius (analogue): mechanical vernier Special features Monoblock construction Hardened stainless steel with matt‑chrome scale Fine‑adjustment screw for controlled setting Analogue vernier, no battery required Delivered in a protective case for transport Conforms to DIN 862 for jaws ≤200 mm; longer jaws to manufacturer's norm FAQ How precise is the reading on this workshop caliper? The workshop caliper provides a scale division of 0.05 mm via its analogue vernier, offering industrially relevant precision for routine shop measurements. Is the instrument suitable for large components and long‑reach tasks? Yes; with a 0–1000 mm measuring range and a 300 mm jaw length, the caliper is designed for heavier, larger components where stiffness and reach are essential. Does the caliper require any power source or batteries? No; the instrument is an analogue vernier caliper and operates mechanically without batteries, ensuring continuous availability on the shopfloor. What protection is provided for transport and storage? The caliper is supplied in a protective case suitable for transport; the case is intended to reduce handling damage but not as a permanent storage environment for long‑term archival purposes. Which standard applies to this instrument? Shorter jaws conform to DIN 862; for the supplied 300 mm jaw, measurements are governed by the manufacturer's norm while maintaining workshop robustness. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With Pointed Jaws 150mm Depth, 0.02mm Graduation, Hardened Stainless Steel, Fine Adjustment, Supplied In Case - Metav IndustryLine
Take advantage of a robust monoblock design, hardened stainless steel construction and precise fine adjustment to keep large-format measurements reliable and repeatable on the production floor; order directly via Metav Werkzeuge or ask the consultants for technical advice. M201.309 Workshop Caliper with Tip — 1,000 mm range, 0.02 mm resolution, stainless The M201.309 Workshop Caliper with Tip is a heavy-duty analogue caliper built for workshop measurement tasks, providing robust external, internal and step measuring capability for large components. 1,000 mm measuring range Hardened stainless steel construction Fine adjustment screw for precise setting Monoblock frame for high rigidity Stable long‑range measuring for larger components Classified in the Large measurement class (500–1,000 mm), this caliper is tailored to workshop and fixture environments where reach and repeatability matter. The monoblock frame reduces flex along the slide, maintaining alignment over the full measuring length and supporting reproducible results on larger workpieces. The extended jaw geometry with a 150 mm tip length enables secure contact on deep features and shoulders, which simplifies handling of housings, large shafts and assembly fixtures without compromising stiffness. Accurate analogue readings with workshop durability The analogue vernier delivers a mechanical resolution of 0.02 mm, keeping the instrument within the range of the highest mechanical precision for calipers. Combined with a matt‑chromed scale on hardened stainless steel, the scale contrast remains clear under workshop lighting and resistive to corrosion. A dedicated fine adjustment screw permits measured, micro‑movement of the slide for exact closing and alignment before the reading is taken, which is particularly useful when measuring step heights or small depth differences where controlled contact force improves consistency. Practical features that support production workflows Designed for use in everyday machine‑shop conditions, the caliper covers external, internal and step measurements in one instrument and is supplied in a transport case for safe handling and storage during site movement. The mechanical vernier format suits environments where robust, battery‑free operation is preferred and service intervals are minimal. Delivered to factory standard (Werksnorm), the instrument is well suited to workshop quality checks and setup tasks; its straightforward mechanics reduce the need for frequent recalibration cycles compared with sensitive electronic instruments. Choose the Metav IndustryLine M201.309 for durable, long‑range workshop measurement and contact Metav Werkzeuge for expert advice and secure supply directly from Emmerich. Technical Data Article number: M201.309 GTIN: 4054469101293 Brand: Metav IndustryLine Facts Measuring range: 0–1000 mm Resolution: 0.02 mm Jaw length: 150 mm Vernier scales: 1/1000" top and 1/50 mm bottom Special features Material: hardened stainless steel with matt‑chromed scale Design: monoblock frame Operation: analogue vernier, fine adjustment screw Measurement types: external, internal, step Delivery: transport case for safe movement Calibration: factory standard (Werksnorm) FAQ How precise is the caliper for workshop tasks? The M201.309 workshop caliper provides a mechanical resolution of 0.02 mm, placing it among the highest‑precision analogue calipers suitable for demanding workshop measurements. Which measurement types can be performed with this caliper? External, internal and step measurements are supported by the caliper; the 150 mm jaw/tip length helps reach deeper features while keeping contact stable. Is the instrument protected for transport between job sites? Yes, the caliper is supplied in a transport case to protect the hardened stainless steel body and scale during movement and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With Pointed Jaws, Fine Adjustment, Monoblock, Hardened Stainless Steel 0.05mm Graduation, Wooden Case - Metav IndustryLine
Benefit from a robust monoblock design, precise fine adjustment and a hardened stainless-steel scale that ensure reproducible measurements across a long 1000 mm range; these features combine to keep production flowing with predictable results. Order the workshop caliper directly via Metav Werkzeuge or consult our technical advisors for application-specific advice. Workshop Caliper M201.339.1 — 1000 mm analogue, fine adjustment (Metav IndustryLine) The Workshop Caliper M201.339.1 is a heavy-duty analogue caliper intended for long-range workshop measurement tasks, offering a 1000 mm measuring range, fine-adjustment screw and hardened stainless-steel scale for reliable component inspection. Monoblock construction for high stability Fine adjustment for precise setting Stainless hardened steel with matt chrome scale 200 mm jaw length for deep reach Stable long-range measurement for large components The caliper's 1000 mm measuring range positions it in the class for long-bar calipers, designed where profile stiffness is essential to keep readings reproducible over distance. The monoblock construction increases rigidity compared with split-frame designs, reducing bending and torsion during handling. With a 200 mm jaw length the instrument reaches deeper features and clamps while maintaining consistent contact geometry, which benefits measurement tasks in heavy machining, jig and fixture inspection, and mould or housing verification. Precise analogue reading with controlled adjustment An analogue vernier with a resolution equivalent to 0.05 mm provides an industrially recognised level of accuracy appropriate for workshop quality control. The combination of a coarse vernier scale (1/128" top) and a metric vernier (1/20 mm bottom) gives flexible reading options on the same instrument, while the fine adjustment screw allows slow, controlled closure for repeatable contact pressure and exact alignment. These features reduce operator-induced error and make this caliper suitable for standard machine-shop checks where dependable, quick readings are required. Rugged materials and workshop-oriented detailing Manufactured from stainless hardened steel and finished with a matt chrome scale, the caliper tolerates workshop environments while keeping scale legibility under typical lighting conditions. The design includes measurement points (tips) for applications that need pointed contact, and the overall build follows established workshop norms referencing DIN 862 for jaw geometry and measuring faces. The robust construction minimises maintenance needs and supports continuous use across shifts, contributing to efficient quality workflows and a low total cost of ownership for medium and large workshops. For large-format workshop measurement needs, contact Metav Werkzeuge to discuss the Metav IndustryLine Workshop Caliper M201.339.1 and arrange purchase or technical consultation Technical data Article number: M201.339.1 GTIN: 4054469101842 eClass: 21170344 Core measurements Measuring range: 0–1000 mm Jaw length: 200 mm Resolution (vernier): 0.05 mm (analogue) Vernier markings: 1/128" (top) and 1/20 mm (bottom) Features and composition Material: stainless hardened steel Scale finish: matt chrome Construction: monoblock Adjustment: fine adjustment screw Special: with measurement tips Norm: DIN 862 (suitable jaw length specification) FAQ What measuring tasks is this caliper best suited for? The Workshop Caliper M201.339.1 is designed for long-range workshop and fixture measurements where a 1000 mm range and increased structural rigidity are required; typical applications include heavy machining, mould inspection and large component verification. How precise are readings from this analogue caliper? Readings are taken with an analogue vernier equivalent to 0.05 mm resolution; the dual vernier layout (1/128" and 1/20 mm) and the fine-adjustment screw support reproducible results for standard industrial quality checks. Is the caliper corrosion resistant and durable for shop use? Yes. The instrument is made from stainless hardened steel and uses a matt chrome scale to preserve legibility and resist typical workshop wear. Can the caliper reach recessed or deep features? The extended 200 mm jaw length improves access to deep bores and recessed features, making it practical for inspection of larger assemblies and components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With Points 150mm Jaws 0.05mm Vernier, Monoblock, Fine Adjustment, Hardened Stainless Steel In Case - Metav IndustryLine
Take advantage of the combination of hardened stainless steel construction, a monoblock frame and precise fine adjustment for repeatable measurements of large workshop components; order the instrument directly via Metav Werkzeuge or consult the team for application advice. Workshop vernier caliper M201.339 — monoblock, fine‑adjustment caliper by Metav IndustryLine Workshop vernier caliper M201.339 is a robust analogue measuring instrument designed for heavy workshop use, offering controlled positioning and a long measuring range for large components Hardened stainless steel construction Monoblock frame for exceptional rigidity Fine adjustment for controlled positioning 1,000 mm measuring range with long jaws Reliable precision for large‑format measurements The Workshop vernier caliper M201.339 places reproducible accuracy at the centre of large‑component measurement. Built in hardened stainless steel with a matt‑chromed scale, the instrument resists workshop wear and maintains scale legibility over prolonged use. Its 1,000 mm measuring range classifies it in the large‑range category (suitable for 500–1,000 mm applications), where profile stiffness is essential to reduce deflection and secure repeatability. The analogue nonius arrangement provides a practical reading system and the instrument’s nominal 0.05 mm resolution meets typical workshop control needs while keeping handling straightforward for assembly, jig and fixture checks. Controlled operation to reduce measurement variability A dedicated fine adjustment mechanism and a true monoblock frame minimise operator‑induced variation by allowing slow, deliberate closure and a rigid reference geometry. The 150 mm jaws offer extended reach and permit access into deeper bores or between fixtures; the inclusion of pointed tips supports measurements in narrow grooves or recesses. These mechanical choices translate into fewer rework cycles and faster setup times on the shopfloor, offering a measurable workflow advantage for teams working on housings, shafts and large assemblies. Ready for work: compliance, transport and practical use The caliper is an analogue vernier designed in accordance with DIN 862 where applicable for the given jaw length, providing a familiar normative basis for inspection routines. Delivery in a protective transport case ensures secure storage and mobility across the workshop or between sites. As a straightforward, mechanically robust instrument, it serves as a cost‑effective standard for dimensional checks where electronic readouts are not required but mechanical reliability and long reach are. Consider the Metav IndustryLine M201.339 for workshop measurement tasks that demand long‑range stability and controlled adjustment — contact Metav Werkzeuge in Emmerich for precise specification matching and delivery coordination. Technical data Article number: M201.339 GTIN: 4054469101835 ECLASS: 21170344 Tariff number: 90173000 Type: analogue vernier caliper Facts Measuring range: 0–1000 mm Jaw length: 150 mm Resolution: 0.05 mm Nonius: top 1/128" / bottom 1/20 mm Norm: DIN 862 (for jaw length ≤ 200 mm) Special features Material: hardened stainless steel, matt‑chromed scale Monoblock construction Fine adjustment mechanism Supplied with pointed tips Analogue operation Delivered in transport case SKU: M201.339 FAQ What measuring range does this instrument cover? The caliper provides a measuring range of 0–1000 mm; the Workshop vernier caliper M201.339 is intended for large‑format workshop measurements. What level of resolution and accuracy can be expected? The analogue nonius yields a 0.05 mm resolution, matching conventional workshop standards for vernier calipers and supporting reliable dimensional checks. Is the instrument suited to heavy workshop environments? Yes — the hardened stainless steel construction, monoblock frame and matt‑chromed scale make the M201.339 robust against shopfloor wear and suited to regular use on fixtures and assemblies. How does the fine adjustment improve measurement? The fine‑adjustment mechanism enables controlled closing and precise positioning of the jaws, reducing operator influence and improving repeatability for serial checks. Does the caliper comply with recognised standards? The instrument is produced with consideration of DIN 862 for the provided jaw length, giving a normative basis for inspection procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper Without Probe Fine Adjustment 0.02mm Resolution Stainless Steel With Hardened Matte Chrome Scale - Metav IndustryLine
Take advantage of robust long‑range measurement, hardened stainless steel construction and a precise fine adjustment mechanism to ensure reproducible results across large components; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Workshop caliper M201.319 (Metav IndustryLine) — 0–1000 mm, 0.02 mm The Workshop caliper M201.319 is a large‑format, analogue workshop caliper designed for heavy‑duty measuring tasks in fabrication and tooling environments, offering long‑span capability with precise micrometric positioning. 0–1000 mm measuring range Hardened stainless steel construction Fine adjustment for accurate positioning For external, internal and step measurements Robust long‑range measurement for large components The caliper provides a 0–1000 mm measuring range that places it in the large‑format category suited to substantial assemblies and fixtures. Built as a monoblock instrument, the rigid profile reduces flex and improves repeatability when measuring long bars, housings or pipe sections. Where single‑handed tools lose stiffness, this caliper maintains alignment over its full span, making it appropriate for quality checks and setup tasks in heavy machining and assembly. Material choice and micrometric control minimise rework Constructed from hardened stainless steel with a matt‑chromed scale, the instrument resists workshop wear and provides a clear, non‑reflective reference for reading. The integral fine adjustment screw allows controlled closing of the jaws so the measuring faces meet the workpiece without overshoot; this controlled contact, together with the caliper’s 0.02 mm mechanical resolution, directly reduces measurement scatter and downstream rework by improving first‑pass accuracy on fits and clearances. Versatile measuring modes and practical jaw geometry Engineered for common workshop tasks, the caliper supports external, internal, and step measurements from the same tool, while the extended 150 mm jaw length enables access into recesses and deeper grooves than standard short jaws. The absence of a pointed tip results in larger, better supported contact faces for repeatable readings on flat, curved and stepped surfaces. Supplied to the manufacturer’s works standard, the instrument is intended as a reliable shopfloor reference for setup, inspection and ongoing quality control. Contact Metav Werkzeuge in Emmerich to discuss technical details or to secure the Metav IndustryLine workshop caliper for the production bench. Technical data Article number: M201.319 GTIN: 4054469101385 ECLASS: 21170344 Customs tariff number: 90173000 Facts Measuring range: 0–1000 mm Minimum range: 0 mm Jaw length: 150 mm Resolution: 0.02 mm Type: Analogue (vernier) Special features Material: hardened stainless steel, matt‑chromed scale Monoblock frame design Fine adjustment mechanism Vernier: 1/1000" (top) and 1/50 mm (bottom) Supplied to works standard Suited for external, internal and step measurements FAQ What measuring range does this caliper cover? The caliper covers a range from 0 to 1000 mm, allowing measurement of large components and assemblies with a single instrument. Is the scale resistant to workshop wear and corrosion? Yes, the M201.319 features hardened stainless steel construction with a matt‑chromed scale for reduced glare and improved resistance to abrasion and corrosion. Can the instrument perform internal and step measurements as well as external checks? Yes, the design supports external, internal and step measurements, making the caliper a versatile tool for routine workshop inspection. What measurement resolution and control does the caliper offer? The instrument provides a mechanical resolution of 0.02 mm and a fine adjustment screw for controlled jaw movement, aiding precise contact and repeatable readings. Is the caliper delivered with an accredited calibration certificate? The caliper is supplied to the manufacturer’s works standard; no ISO 17025 accreditation is indicated in the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper Without Probe Fine-Adjustment Stainless Hardened Matt Chrome Scale, For Outside/Inside/Step Measurements - Metav IndustryLine
Taking advantage of the combination of large-span measurement capability, hardened stainless-steel construction and a fine‑adjustment control ensures reproducible results on heavy workshop components; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Workshop caliper without tip M201.319.1 — 0–1000 mm, stainless steel, fine adjustment The Workshop caliper without tip M201.319.1 is a robust, monoblock stainless‑steel caliper designed for large‑format measurements in workshop and heavy‑duty metalworking environments. 0–1000 mm measuring range 0.02 mm resolution for fine readings Hardened stainless‑steel body Fine‑adjustment screw for precise setting Robust design for long‑span workshop measurement Built as a long‑bar workshop instrument, this caliper covers a 0–1000 mm span and is classified for large‑format measurement tasks where profile stiffness and reproducibility matter. The monoblock construction reduces torsion and flex over the full measuring length, so measurements on fixtures, housings and large workpieces stay consistent. The frame and jaws are made from stainless steel that has been hardened and fitted with a matt‑chromed scale to reduce glare and wear; that combination supports durable use in busy production areas while preserving scale legibility. High mechanical precision and precise setting control The instrument achieves mechanical fine‑reading through an analogue vernier and a dedicated fine‑adjustment screw, enabling sensitive approach and exact zeroing before any reading is taken. The mechanical design yields a practical resolution of 0.02 mm, placing it among the higher‑precision analogue calipers for workshop use. Dual vernier markings (top and bottom) assist with rapid cross‑checks: the upper scale is graduated in fractions of an inch while the lower scale provides metric readings for direct interpretation on machine drawings. Delivered to a factory standard, the tool supports reliable, repeatable inspection routines without the need for complex electronics. Suited to heavy workshop tasks and multiple measurement styles Designed for common workshop operations, the instrument performs outside, inside and step measurements with the same stability thanks to the long jaw length and the robust carrier. The extended jaw length of 200 mm improves accessibility when measuring deep bores or large contours while preserving control during interior checks. Supplied to workshop specification under the manufacturer’s works standard, this caliper is intended for machinists, toolroom staff and assembly technicians who require a dependable analogue instrument for large components. Technical enquiries are welcome; Metav Werkzeuge provides product guidance for selecting the right measuring tool for the application. For dependable large‑span measurements choose the Metav IndustryLine workshop caliper and contact Metav Werkzeuge in Emmerich for product advice and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M201.319.1 GTIN: 4054469101392 eClass: 21170344 Manufacturer: Metav IndustryLine Norm: Werksnorm Facts Measuring range: 0–1000 mm Resolution / reading: 0.02 mm Jaw length: 200 mm Type: Analog vernier caliper Vernier details: 1/1000" (top) and 1/50 mm (bottom) Special features Material: hardened stainless steel, matt‑chromed scale Monoblock construction for increased stiffness Fine‑adjustment screw for precise positioning Measurement types: outside, inside and step measurements FAQ How accurate is this workshop caliper for routine checks? Accuracy is based on the analogue vernier and a practical reading capability of 0.02 mm; the Workshop caliper M201.319.1 offers high mechanical precision suitable for standard workshop inspections. Is the caliper suitable for measuring internal diameters and steps? Yes — the design supports inside and step measurements as well as outside measurements, so the instrument covers the three common measurement styles required in metalworking. What construction ensures stability over the 0–1000 mm span? The monoblock frame and hardened stainless‑steel construction reduce flex and torsion, helping to maintain reproducible measurements across long spans. Which standard is the instrument delivered to? The caliper is supplied to the manufacturer’s works standard (Werksnorm), providing consistent factory specifications for workshop use. What industries and tasks is this caliper aimed at? The tool is intended for heavy‑duty workshop and machine‑shop applications: large fixtures, housings, toolroom work and general heavy machining where long‑span analogue measurement is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper Without Probes 150mm Jaws 0.05mm Vernier Fine Adjustment Monoblock Stainless Steel, Supplied in Case - Metav IndustryLine
Benefit from a hardened stainless-steel construction and precise fine adjustment for reliable, repeatable results on large workshop components; the monoblock design provides stability across extended measuring lengths. Order the caliper directly via Metav Werkzeuge or consult our advisors for tailored technical guidance. Metav IndustryLine Workshop Caliper M201.329 — 1000 mm range, 0.05 mm vernier, monoblock fine adjustment The Metav IndustryLine Workshop Caliper M201.329 is a long-range, hardened stainless-steel caliper designed for robust workshop measurement of large components, combining a 1000 mm measuring scope with a precise fine-adjustment mechanism. 1000 mm measuring range Hardened stainless steel with matt-chromed scale Monoblock frame with fine adjustment Supplied in a protective case Reliable measurement for large workshop components This caliper is tailored to the demands of heavy workshop use: the 1000 mm measuring range places it in the category for long-beam calipers, suitable for sizeable workpieces such as large housings, fixtures and pipe components. The monoblock construction minimises flex over the measuring length, which keeps results reproducible even when handling heavier parts. The stable frame design reduces the need for repeated checks, speeding up routine inspection tasks and supporting a smoother production flow. Clear, repeatable readings with analogue vernier precision Equipped with an analogue vernier system, the instrument provides a practical reading setup: the vernier scales read 1/128 inch (top) and 1/20 mm (bottom), corresponding to a standard workshop resolution of 0.05 mm. This level of resolution is appropriate for many machining and fabrication tasks where robust reproducibility matters more than sub-micron resolution. The matt-chromed scale improves contrast under workshop lighting, and the fine-adjustment screw allows controlled closing of the jaws to avoid overshoot and variability in applied measuring force. Robust materials and compliance for everyday use The measuring faces and beam are manufactured from hardened stainless steel, delivering corrosion resistance and long-term wear performance in busy environments. The jaw length of 150 mm supports deep gripping and offers better support when measuring larger diameters or profiles. Conformance to DIN 862 is maintained for the instrument’s geometry where applicable (jaw length up to 200 mm), ensuring that the caliper meets recognised workshop standards for mechanical calipers. Practical handling and workshop benefits A built-in fine-adjustment mechanism and a monoblock frame combine to make single-handed adjustments straightforward while preserving measurement stability. The caliper is supplied in a protective case for transport and storage, reducing the risk of damage between jobs and keeping the scale clean. For workshops that require dependable, low-maintenance tools, this instrument reduces downtime and supports consistent quality control on larger components. Contact Metav Werkzeuge today to discuss application suitability for the Metav IndustryLine caliper M201.329 and to arrange fast delivery from our Emmerich facility Technical data SKU: M201.329 GTIN: 4054469101590 Category: Messgeräte › Messschieber Facts Measuring range: 0–1000 mm Resolution/vernier: 0.05 mm; 1/128" (top); 1/20 mm (bottom) Jaw length: 150 mm Standard: DIN 862 (applicable for jaw length up to 200 mm) Special features Material: hardened stainless steel with matt-chromed scale Monoblock design Fine adjustment screw Delivered in protective case Analogue vernier instrument FAQ Is this caliper suitable for large workshop parts and fixtures? The Metav IndustryLine Workshop Caliper M201.329 is designed for large components, offering a 1000 mm measuring range and a rigid monoblock frame for reproducible results on sizeable workpieces. What reading resolution does the instrument provide? The caliper uses an analogue vernier with a 0.05 mm resolution (1/20 mm on the lower scale) and an additional 1/128" top scale for inch-referenced readings; this suits general machining and inspection tasks. Does the caliper comply with recognised standards? Yes—geometry and dimensional rules follow DIN 862 where applicable for the specified jaw length, ensuring alignment with common workshop standards. How is the instrument delivered and protected during transport? The caliper is supplied in a robust protective case to safeguard the beam and scale during transport and storage, preserving accuracy between jobs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Brake Disc Gauge 120mm Jaw, Matt Chrome, Vernier 0.1mm, Inox, Supplied in Case - Metav IndustryLine
Take advantage of a robust workshop instrument that combines stainless steel construction, a compact 0–100 mm measuring range and a clear Vernier 0.1 mm reading for dependable brake disc checks; order or consult via Metav Werkzeuge for tailored advice and supply. Brake disc inspection gauge M201.181 – stainless steel, Vernier 0.1 mm (Metav IndustryLine) The Brake disc inspection gauge M201.181 is an analogue measuring caliper developed for rapid dimensional checks of brake discs and similar components in workshop and inspection environments. Stainless steel construction, matt chrome finish Measuring range 0–100 mm, compact format Vernier scale 0.1 mm resolution Jaw length 120 mm for deep contact Consistent workshop readings for routine inspection The analogue Vernier scale provides a reliable, mechanically robust alternative to digital instruments, giving a readable graduation of 0.1 mm that suits frequent checks during maintenance shifts. Solid stainless steel construction with a matt chrome surface reduces wear and resists workshop grime, so calibration stays stable between service intervals. The compact 0–100 mm range places this instrument in the standard workshop class, offering the best balance of reach and stiffness for everyday brake disc thickness and diameter checks while remaining easy to handle and store. Purpose-built geometry for brake disc control With a jaw length of 120 mm, the gauge is dimensioned to engage brake discs at appropriate contact points, simplifying thickness verification without elaborate fixturing. The instrument’s analogue nature removes dependence on batteries and electronics, allowing direct comparison readings and immediate pass/fail decisions during inspection runs. Where a simple, repeatable measurement routine is needed, this caliper supports efficient throughput and reduces process interruptions, contributing to measurable time savings on each service bay. Durable design that supports workshop practice The matt chrome plating on the stainless base material improves scratch resistance and gives a non-reflective surface that helps visibility of the Vernier marks under workshop lighting. Being an analogue instrument, maintenance consists mainly of cleaning and occasional lubrication of the slide, keeping lifetime costs low while maintaining measurement reliability. The tool is ideal for technicians who prioritise robust, low-maintenance instruments that integrate seamlessly into standard quality-control workflows. Contact Metav Werkzeuge for application guidance or to arrange a supply of the M201.181 brake disc inspection gauge from Metav IndustryLine; regional stock and technical consultants in Emmerich can advise on compatibility with inspection procedures and dispatch options. Technical data Article number: M201.181 GTIN: 4054469100951 ECLASS: 21170344 Customs tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–100 mm Jaw length: 120 mm Reading / graduation: 0.1 mm (Vernier) Instrument type: analogue vernier caliper Special features Material: inox (stainless steel) Finish: matt chrome plated Application: brake disc inspection and basic workshop metrology Format: compact standard caliper suitable for hand operation FAQ How accurate is the Vernier on this gauge? The Vernier provides a reading graduation of 0.1 mm; typical workshop reproducibility aligns with the instrument’s analogue design and stable stainless construction. Can the instrument measure brake disc thickness reliably? Yes, the caliper’s jaw geometry and 120 mm jaw length are intended to support rapid brake disc thickness checks and dimensional verifications in service environments. Is the gauge suitable for everyday workshop use? The matt chrome finish and stainless steel base make the instrument robust against routine handling and contamination, supporting continuous use with minimal maintenance. Does the instrument require batteries or electronic upkeep? No; being an analogue vernier caliper, the gauge operates mechanically and does not require batteries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Depth Stop 8mm Width For Pocket Calipers Up To 200mm Stainless Hardened Ground Lapped - Metav IndustryLine
Reliable depth control and corrosion resistance combine to deliver consistent, repeatable measurements for pocket calipers up to 200 mm, while the compact 100 x 8 mm footprint keeps setups unobtrusive. Benefit from hardened, finely finished stainless steel for long service life and order the accessory directly via Metav Werkzeuge or consult our specialists for application advice. Depth stop M401.031 — pocket caliper accessory, 100 x 8 mm, stainless steel A Depth stop M401.031 that converts pocket calipers into a dependable depth-measuring tool, intended for workshop and toolroom use where compact, repeatable depth control is required. Hardened stainless construction Compact 100 x 8 mm footprint Compatible with pocket calipers up to 200 mm Finely ground and lapped surface Better depth control for everyday metrology The adapter provides repeatable depth measurement by giving a stable reference face where pocket calipers otherwise lack a large bearing surface. With a compact 100 x 8 mm contact area, the attachment reduces lateral play and helps maintain alignment during insertion and extraction, which raises process reliability in small-batch production and inspection tasks. Classified for the standard measurement range (up to 300 mm), this accessory suits the typical demands of machine shops and metalworking benches that rely on compact instruments. Robust materials for low-maintenance longevity Manufactured from stainless steel, the stop has been hardened and finely ground and lapped to ensure a flat, wear-resistant measuring face. These treatments improve corrosion resistance and maintain dimensional stability under repeated use, reducing the need for frequent replacement. The hard, precision-finished surface also minimises measurement uncertainty caused by contact deformation, which is especially valuable when working with small tolerances in everyday production environments. Simple integration and clear application benefits Designed as an accessory for pocket calipers, the unit fits quickly and provides a consistent datum for depth checks on recesses, bores and stepped components. The compact form factor avoids interference with surrounding geometry while giving a larger bearing area than the caliper jaw alone, so setup time is reduced and measurement throughput improves. If an exact fit or application advice is needed, technical guidance is available to match the accessory to specific caliper models or inspection workflows. For practical advice or to request this Metav IndustryLine depth stop M401.031 for reliable depth checks on pocket calipers up to 200 mm, contact Metav Werkzeuge — experts for precision tools and workshop supply Technical data SKU: M401.031 GTIN: 4054469143637 ECLASS: 21029210 Customs tariff number: 90178090 Facts Dimensions: 100 x 8 mm Compatible caliper range: up to 200 mm Type: Analog accessory Special features Material: stainless steel, hardened, finely ground and lapped Application: depth measurement accessory for pocket calipers Category: calipers / calipers accessory FAQ How does the depth stop attach to a pocket caliper? The depth stop M401.031 is designed to seat against the caliper beam and provide an extended bearing face; mounting is intended for pocket calipers with a compatible beam profile and up to 200 mm measuring range. Is the material suitable for workshop environments with metalworking fluids? Yes, the stainless steel construction and fine surface finishing of the M401.031 resist corrosion and cleaning agents commonly used in machine shops. Can this accessory improve repeatability compared with the caliper alone? By offering a larger, hardened contact face, the M401.031 reduces bending and positional variance, improving repeatability for depth measurements compared with relying on the caliper jaws alone. Is the depth stop suitable for precision inspection tasks in a toolroom? The hardened, lapped surface makes the accessory appropriate for routine inspection where consistent reference faces are required; it is intended for standard-range pocket calipers used in workshop and toolroom environments. Does the product require any special maintenance? Routine cleaning and occasional lubrication of the caliper beam are sufficient; the hardened and lapped finish minimises wear and helps maintain measurement stability over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Precision Caliper 0.02mm Nonius, Locking Screw, Depth Rod, 4‑Function, Chrome Matt Finish - Metav IndustryLine
Take advantage of the compact design, 0–100 mm measuring range and 0.02 mm resolution for precise, repeatable measurements in small-part production. Order the caliper directly via Metav Werkzeuge or contact the consultants for tailored technical advice and availability. Small vernier caliper M201.005 — compact 0–100 mm, 0.02 mm resolution (Metav IndustryLine) Small vernier caliper M201.005: a compact analogue caliper for precise inside, outside, depth and step measurements in fine mechanical workshops and general metalworking Small range, high resolution 0–100 mm 0.02 mm Four-way measurement: outside, inside, depth, step Monoblock stainless steel frame, matt chrome finish Locking screw for stable readings Precise measuring in compact spaces The 0–100 mm measuring range classifies this instrument in the Mikro category, ideal for fine mechanical tasks where compactness and precision matter. With a vernier resolution of 0.02 mm (nonius 1/50), the caliper delivers a level of detail suitable for watch, model and small-component work while remaining easy to handle. Compliance with DIN 862 ensures that the scale and graduation meet recognised workshop standards, providing an objective basis for quality checks and setting a clear expectation of measurement performance. Stable handling for repeatable results A monoblock frame reduces flex and improves repeatability when measuring thin or small workpieces. The integrated locking screw secures the slide for transport or comparative measurements, while the pronounced depth rod allows reliable depth readings without additional tools. As an analogue instrument with a precise nonius, the tool avoids battery dependency and offers tactile feedback preferred in many production environments; the design supports fast, repeatable checks at the machine or bench. Built for workshop reliability and trust Constructed from stainless steel with a matt chrome finish, the caliper resists wear and keeps graduations legible over long service life. The combination of robust materials, a simple mechanical vernier and a compact layout makes this caliper a cost-effective precision instrument for serial inspection and set-up tasks. As part of the Metav IndustryLine offering, the product benefits from Metav’s quality filter and broad supply chain support, reflecting the company’s focus on making high-precision tools accessible to workshops across Europe. Contact Metav Werkzeuge in Emmerich for availability, technical clarification or to discuss suitability for specific applications — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M201.005 GTIN: 4054469163833 Label: Klein-Messschieber 100x0,02mm mattverchromt, Feststell Category: Messgeräte > Messschieber Facts Measuring range: 0–100 mm Resolution: 0.02 mm Vernier: 1/50 (nonius) Display: analogue Measuring functions: outside, inside, depth, step Depth gauge: yes Special features Material: stainless steel (inox) Finish: matt chrome plated Monoblock construction Locking screw for slide fixation Standard: DIN 862 Brand: Metav IndustryLine FAQ What measurement tasks can this caliper perform? The small vernier caliper M201.005 (Metav IndustryLine) supports four-way measurement: external diameters, internal bores, depth measurements and step heights, making it versatile for small-part inspection. Is this caliper suitable for precision workshop use? Yes. The instrument falls into the Mikro class (0–100 mm) with a vernier resolution of 0.02 mm and is manufactured to the requirements of DIN 862, so it is appropriate for precise workshop and assembly tasks. What material and finish does the caliper have? The M201.005 features a stainless steel body with a matt chrome finish and a monoblock frame for increased rigidity and long-term legibility of the graduations. Is the caliper analogue or digital? This is an analogue vernier caliper with a nonius (1/50) reading; it provides mechanical, battery-free operation and tactile measurement feedback. What identifiers are useful for ordering or inventory? Use SKU M201.005 or GTIN 4054469163833 when ordering or cataloguing this caliper. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Precision Caliper 0.02mm Resolution, Four-Function Measurement, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of a finely balanced combination of precision, compact handling and durable design for repeatable workshop measurements; order the instrument directly via Metav Werkzeuge or consult the experts for application advice. Metav IndustryLine Dial Caliper 0–100 mm, 0.02 mm graduation The Metav IndustryLine dial caliper that delivers compact, high‑precision measuring for fine mechanical and watchmaking applications. Analogue dial with 0.02 mm graduation Four-way measurement capability (4 functions) Compliant with DIN 862 standard Delivered in protective case for transport Precision where small tolerances matter The instrument offers a measuring range of 0–100 mm with a graduation of 0.02 mm, placing it in the compact/high‑precision class for fine mechanical work. Conformity with DIN 862 ensures standardised construction and measurement practice so that results are comparable across jobs and teams. The analogue dial readout with a 32 mm dial provides a clear visual reference for rapid checks, while the mechanical design keeps readings stable under frequent use. This makes the caliper particularly useful for repetitive quality control tasks where a reliable analogue indication is preferred. Practical handling and transport advantages Engineered for comfortable single‑hand operation, the gauge combines a lightweight frame (approx. 0.2 kg) with stiff jaws to reduce bending during short spans. The jaw geometry (30/19 mm) suits both external and internal measuring tasks on small components. A thread table on the reverse face adds practical reference data at the workbench, and delivery in a protective case ensures safe transport and storage between shifts. These design choices reduce set‑up time and protect the measuring face, supporting faster throughput in workshop workflows. Versatile measuring functions adapted to fine work Equipped for four‑way measurement — external, internal, depth and step — the instrument covers the common tasks encountered in watchmaking, toolmaking and precision component inspection. The analogue mechanism avoids battery dependence and offers tactile feedback when contacting surfaces, which some technicians prefer for delicate parts. As a compact precision tool, it suits bench checks, assembly inspection and incoming goods control where space is limited but accuracy must be maintained. Contact Metav Werkzeuge for tailored advice or to secure the Metav IndustryLine dial caliper with protective case for precise workshop measurement and dependable delivery from Emmerich. Technical data SKU: M202.020 GTIN: 4054469102160 ECLASS: 21170344 Norm: DIN 862 Label: Uhren-Messschieber 100x0,02mm Facts Measuring range: 0–100 mm Graduation / resolution: 0.02 mm Dial diameter: 32 mm Weight: 0.2 kg Special features Analogue dial display Four-way measurement: internal, external, depth, step Protective case for transport Thread table on reverse Designed for watchmaking and fine mechanics FAQ What measurement range and resolution does this caliper provide? The Metav IndustryLine dial caliper offers a measuring range of 0–100 mm and a graduation of 0.02 mm, suitable for fine mechanical tolerances. Is the instrument suitable for internal and depth measurements? Yes — the caliper supports four‑way measurement (external, internal, depth and step), making it versatile for inspection and assembly tasks. Does this model comply with recognised standards? The instrument is manufactured in accordance with DIN 862, ensuring standardised dimensions and measuring practice for workshop use. Will the caliper arrive ready for use and protected in transit? Delivery includes a protective case for transport; the Metav IndustryLine caliper is supplied ready for workshop deployment and safeguarded against handling wear. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Precision Caliper 0.05mm Vernier Slim Jaws Stainless Steel Matt Chrome Locking Screw Four-Function, DIN 862 - Metav IndustryLine
Take advantage of a compact, workshop-ready vernier that combines robust INOX construction, reliable 0.05 mm reading and practical depth-measure capability for repeatable results. Order the small vernier caliper directly via Metav Werkzeuge or consult our sales team for specification advice. Small Vernier Caliper M201.003.1 — 0–100 mm, 0.05 mm vernier (INOX, matt chrome) A small vernier caliper M201.003.1 designed for precise measurements in confined and fine‑mechanical applications Compact 0–100 mm vernier for tight spaces Reading accuracy 0.05 mm per DIN 862 Stainless steel (INOX) with matt chrome finish Locking screw and integrated depth gauge Precision in compact form for micro‑work This compact vernier is classified in the micro range with a 0–100 mm measuring span, making it particularly suited to fine mechanical work where reach and stiffness must be balanced. The mechanical vernier provides a 0.05 mm reading in accordance with DIN 862, which corresponds to industrial standard tolerances for general workshop and quality‑control tasks. The short jaw geometry and narrow tips enable access to confined features while preserving repeatability; the monoblock construction further reduces flexing for consistent results. Designed for reliable, repeatable measurement routines Constructed from INOX with a matt chrome finish and weighing approximately 0.1 kg, the instrument tolerates everyday workshop handling and resists corrosion. A locking screw secures the slide to prevent creep during transfer measurements, while the built‑in depth gauge extends the caliper’s usability beyond simple outside and inside checks. The instrument supports four measurement functions — outside, inside, depth and step — which consolidates several measuring tasks into a single, maintenance‑friendly tool and speeds up inspection cycles. Low‑effort handling and clear interpretation of results As an analogue vernier, the caliper operates without batteries or electronic interfaces, offering a dependable measuring method for environments where simplicity and robustness are priorities. The narrow measurement tips and precise vernier scale reduce the need for fixturing in small assemblies, enabling faster throughput. Combined with the solid stainless construction and a positive slide action, this tool delivers a practical balance of durability, accessibility and measurement clarity for routine production checks and fine‑part inspection. For workshop-ready precision and fast delivery, contact Metav Werkzeuge in Emmerich for advice or to source the M201.003.1 small vernier caliper directly via our sales team at info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical Data Article number: M201.003.1 GTIN: 4054469163093 Tariff number: 90173000 Data Measuring range: 0–100 mm Reading: 0.05 mm (vernier) Weight: 0.1 kg Special features Material: INOX (stainless steel) Finish: matt chrome Monoblock construction Locking screw Depth gauge Narrow jaws for confined spaces Four measurement functions: inside, outside, depth, step Standard: DIN 862 FAQ What measurement functions does the caliper provide? The small vernier caliper M201.003.1 offers four measurement functions: outside, inside, depth and step measurements, consolidating multiple tasks into one tool. Is the reading compatible with workshop inspection standards? Yes, the vernier scale provides a 0.05 mm reading and the instrument complies with DIN 862, matching typical industrial requirements for mechanical verniers. What material and finish does the instrument have? The instrument is made from INOX (stainless steel) with a matt chrome finish to resist corrosion and wear in workshop environments. Does the product include a locking mechanism and depth measurement? The M201.003.1 features a locking screw for secure measurements and an integrated depth gauge for extended functionality. Which application areas suit this caliper best? Its compact 0–100 mm span and narrow jaws make it ideal for fine mechanical work, small assemblies and confined spaces in production and maintenance contexts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Precision Caliper 0.05mm Vernier With Pointed Beak, Monoblock, 4-Function, Chrome Matt - Metav IndustryLine
Compact precision in a compact format: a mechanical vernier with 0–100 mm range and 0.05 mm graduation, featuring pointed jaws for narrow contours and a built‑in depth gauge. Supplied ready for workshop use in a protective transport case. Order directly via Metav Werkzeuge or ask our consultants for application advice. Compact caliper M201.003 — small mechanical caliper, 0–100 mm, 0.05 mm (Metav IndustryLine) The M201.003 is a compact mechanical caliper for fine measurements up to 100 mm, designed for precise workshop and fine‑mechanical tasks where access is restricted Mechanical vernier with 0.05 mm reading Pointed jaws for narrow features Depth gauge and step measurement Delivered in protective transport case Precision where space is limited The compact vernier delivers reliable readings across a 0–100 mm span with a 0.05 mm graduation, placing it in the workshop micro class for fine mechanical work. The analogue scale and mechanical vernier give tactile feedback and immediate results without electronics, which benefits shops that value simplicity and robustness. For inspection tasks where fast, repeatable checks matter, the small format keeps reach and control in one hand while maintaining industry‑standard resolution for many production and quality routines. Durable build for repeatable measurements Constructed from stainless steel with a matt chrome finish, the caliper is designed to resist corrosion and surface wear in everyday use. A monoblock frame reduces play and maintains jaw parallelism, so measurements stay consistent over repeated use. The combination of a rigid carrier and precise mechanical guidance reduces measurement scatter that can arise from loose assemblies, making the tool suited to routine shop verification and to applications where component handling is frequent. Flexible measurement options for workshop needs Equipped for fourfold measurement, the instrument covers external and internal diameters, steps and depth with a single tool; the integrated depth gauge expands the range of tasks that can be solved at the bench. The pointed jaws allow access to small recesses and profiled edges, while the analogue design eliminates battery dependency and simplifies maintenance. Supplied in a protective case for secure transport, the caliper is ready to be carried between workstations without additional packaging. Built for precision trades and production support This compact caliper is ideal for fine assembly, small series production and workshop metrology where space and access are restrictive. The M201.003 from Metav IndustryLine combines a short jaw length with high mechanical stiffness to suit delicate components, micro parts and precision fixtures. Metav’s offering is backed by a broad distribution and product support network in Europe, reflecting a practical approach to making precision tools accessible across industry and craft. For tailored advice on using the M201.003 in specific production scenarios, contact Metav Werkzeuge for ordering and technical consultation from their Emmerich team. Technical data Article number: M201.003 GTIN: 4054469100050 Brand: Metav IndustryLine Facts Measurement range: 0–100 mm Graduation / reading: 0.05 mm Type: Analog vernier caliper Fourfold measurement: external, internal, depth, step Zolltarifnummer: 90173000 Special features Material: stainless steel (inox) Matt chrome finish Pointed jaws for narrow features Monoblock construction Integrated depth gauge Supplied in protective transport case FAQ What measurement range does the caliper cover? The caliper covers a 0–100 mm range suitable for small components and fine mechanical tasks. What resolution and reading type does it offer? Readings are mechanical via a vernier with 0.05 mm graduation for reliable analogue measurement. Can this caliper measure depth, steps and internal dimensions? Yes — the instrument supports external and internal measurements plus step and depth measurement via the integrated depth gauge. Is the instrument suitable for precision micro work? The compact format and fine graduation place it in the micro category, making it well suited to watchmaking, small assemblies and precision fixtures. Does the caliper require batteries or electronics? No — the analogue vernier operates without batteries, offering maintenance‑free measurement for routine workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Precision Caliper 0.05mm Vernier, Matt Chrome Finish, Locking Screw, Depth Rod, Supplied in Case - Metav IndustryLine
Combining a compact 0–100 mm measuring range, vernier accuracy of 0.05 mm and robust stainless‑steel construction, this caliper delivers dependable workshop measurement where space and precision matter. Order the instrument directly via Metav Werkzeuge or consult our technical advisors for application guidance. M201.001 Small vernier caliper — compact 0–100 mm, 0.05 mm vernier (Metav IndustryLine) The M201.001 small vernier caliper is an analogue precision tool for fine mechanical and general workshop measuring tasks, designed for compact handling and repeatable results. Compact 0–100 mm measuring range Vernier reading 0.05 mm resolution Stainless steel construction for durability Delivered in a transport case for safe handling Precise, repeatable measurements for everyday inspection The caliper is built to provide clear, reproducible readings with a vernier graduation giving a 0.05 mm step that aligns with DIN 862 practice for analogue instruments. As a member of the micro class (measuring range up to 100 mm), it is optimised for tasks requiring tight control in limited space — think small components, fixture checks or quality-control tasks on assemblies. The vernier system offers a straightforward optical reading and supports efficient inspection workflows where fast, consistent results are needed, promoting measurable process reliability in routine production checks. Sturdy construction and ergonomic handling reduce measuring errors Manufactured from stainless steel, the tool features a monoblock frame that resists twist under hand pressure and a secure locking screw to fix the jaw position during transfer or marking. The integrated depth gauge and the instrument’s capability for four measurement modes — outside, inside, depth and step — reduce the need to swap tools and speed up set‑ups. Supplied in a transport case, the caliper is protected during storage and transit, ensuring the measuring faces remain ready for immediate use and extending the service life of the instrument. Practical choice for workshops and precision trades The compact format and robust build make the caliper a practical option for maintenance teams, toolrooms and precision trades where repeatability and simple operation are priorities. The model M201.001 from Metav IndustryLine offers a reliable analogue solution for quick checks and adjustment work, combining traditional vernier technology with workshop‑grade materials. Metav’s quality filter in Emmerich underpins availability and consistent product quality, supporting a smooth supply chain for shops and production lines alike. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and rapid supply Technical data Article number: M201.001 GTIN: 4054469100012 Material: stainless steel Measuring range: 0–100 mm Resolution: 0.05 mm Standard: DIN 862 Type: Analog vernier caliper Facts Reading step: 0.05 mm Maximum measuring range: 100 mm Tariff number: 90173000 Special features Four measurement modes: inside, outside, depth, step Locking screw Monoblock construction Depth gauge included Supplied in transport case FAQ How many measurement types does the caliper support? The M201.001 from Metav IndustryLine supports four measurement modes: outside, inside, depth and step. What is the reading resolution and which standard applies? The instrument has a vernier resolution of 0.05 mm and is specified with reference to DIN 862 for analogue calipers. Is the caliper suitable for fine mechanical work? Yes, the compact design places the caliper in the micro class (measuring range up to 100 mm), making it well suited to fine mechanical and precision workshop tasks. What material are the measuring faces and frame made of? The M201.001 is manufactured from stainless steel for robust handling and resistance to workshop wear. Is a protective case included with delivery? The caliper is supplied in a transport case to protect the measuring faces during storage and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200mm Workshop Caliper With Long Jaws, Fine Adjustment Monoblock, Hardened Stainless Steel, 0.05mm Resolution - Metav IndustryLine
Take advantage of a long-range, workshop-grade measuring instrument that combines a 1,200 mm measuring range, fine-adjustment thumbwheel and a monoblock construction for repeatable, rigid measurements; delivered in a protective transport case for safe handling. Order the caliper directly via Metav Werkzeuge or consult our specialists for integration into production workflows. Workshop caliper with tips M201.345.1 — 1,200 mm range, fine adjustment (Metav IndustryLine) A Workshop caliper with tips M201.345.1 designed for long-format measurement tasks in fixture and mould assembly, offering robust construction and precise vernier readings for mixed imperial/metric work Long 1,200 mm measuring range Hardened stainless steel construction Fine-adjustment thumbwheel Delivered in protective transport case Precision where reach matters This long-format caliper provides a 1,200 mm measuring range, addressing the needs of larger assemblies without sacrificing measurement quality. The monoblock design increases rigidity along the beam so that longer measurements remain reproducible, while the hardened stainless steel beam with a matt-chrome scale resists wear and reduces reflection for clearer reading. For workshops that measure large housings, tooling plates or long shafts, the increased beam stiffness translates into fewer re-measurements and more reliable production control. Clear vernier readings for mixed systems Equipped with a classical vernier layout — 1/128" (top) and 1/20 mm (bottom) — the instrument offers both imperial and metric reading options. The metric vernier corresponds to a mechanical resolution of 0.05 mm, matching industrial expectations for analogue calipers and enabling consistent part inspection. The dual-scale arrangement simplifies cross-referencing drawings and legacy specifications without converting units electronically, making the caliper especially practical where both standards are still in use. Fine adjustment and practical jaw geometry A dedicated fine-adjustment thumbwheel grants controlled approach and precise settling on the measured surface, reducing overshoot and operator-induced variability during closing. The 300 mm jaw length supports firm engagement on long or irregular parts and the presence of measuring tips extends the instrument’s utility for probing recesses and stepped geometries. Together, these features reduce setup time and improve confidence in each reading, particularly during repetitive quality-control tasks. Built for workshop life and conformity Manufactured for everyday use, the instrument follows DIN 862 for standard jaw dimensions up to 200 mm and is produced to factory standard for larger jaw lengths such as the 300 mm jaws fitted here. The robust finish and construction suit the demands of metalworking environments; the caliper is supplied in a protective transport case to safeguard the tool during storage and transport between workstations. The analogue format keeps operation simple and durable, with minimal maintenance compared with electronic systems. Contact Metav Werkzeuge today to arrange supply of the Metav IndustryLine workshop caliper and to discuss how this long-range measuring instrument can support precise, repeatable inspection in your production or tooling environment. Technical data SKU: M201.345.1 GTIN: 4054469101910 ECLASS: 21170344 Customs tariff number: 90173000 Facts Measuring range: 1,200 mm Jaw length: 300 mm Resolution (metric): 0.05 mm Nonius/vernier: 1/128" (top) / 1/20 mm (bottom) Special features Monoblock construction Fine-adjustment thumbwheel Hardened stainless steel with matt-chrome scale With measuring tips for recess/stage measurement Delivered in protective transport case Analogue vernier for imperial and metric readings Conforms to DIN 862 for jaw lengths ≤ 200 mm; factory standard for larger jaws FAQ What measuring range does this caliper cover? The caliper covers a measuring range of 1,200 mm, making it suitable for long components and larger assemblies. What resolution and scales are available on the instrument? The instrument uses vernier scales with 1/128" on the top and 1/20 mm on the bottom, providing a metric resolution of 0.05 mm for standard analogue measurements. Is the caliper suitable for heavy workshop use? Yes, the caliper is built from hardened stainless steel with a matt-chrome scale, a monoblock beam and a protective transport case to withstand workshop conditions. Does the caliper support imperial and metric specifications? Yes, the dual vernier layout enables direct reading in both imperial (inches) and metric (millimetres) without conversion tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200mm Workshop Caliper With Points 200mm Jaws 0.05mm Vernier, Hardened Stainless Steel Monoblock, Fine Adjustment, Supplied In Case - Metav IndustryLine
Take advantage of the combination of long measuring range, robust monoblock construction and precise 0.05 mm graduation for reproducible workshop measurement results; order directly via Metav Werkzeuge or ask our consultants for application advice. Workshop Caliper with Tips M201.345 — Monoblock vernier caliper, 1,200 mm range, 0.05 mm The Workshop Caliper with Tips M201.345 is a long-range, workshop-grade vernier caliper designed for large components and fixture work, combining a rigid monoblock beam with a fine-adjustment spindle for repeatable setting and safe handling. 1,200 mm measuring range for large components Monoblock construction in hardened stainless steel Fine-adjustment spindle for precise positioning Measure large assemblies with reliable rigidity The long 1,200 mm range places this caliper in the long-format class for workshop measuring, where beam stiffness and reproducibility are decisive. The monoblock design reduces flex along the beam, so measurements taken over greater spans remain consistent. This construction is particularly advantageous when checking long rails, frames or large housings where repeatable external dimensions are required. The vernier implementation keeps the instrument independent of electronics and immediately usable at the bench. Precision that matches workshop practice With a 0.05 mm graduation and vernier scales—1/128 inch on the upper scale and 1/20 mm on the lower—the caliper provides the industry-standard analogue resolution for mechanical workshops. This level of resolution corresponds to established workshop tolerances under DIN 862, offering a clear, verifiable basis for pass/fail decisions in production. The integrated fine adjustment spindle simplifies the alignment of the jaws, reducing setting errors and speeding up repetitive checks. Built to withstand daily use Materials and finishing prioritise longevity: the beam and jaws are made from hardened stainless steel with a matt-chromed scale for low-reflectivity reading and corrosion resistance in demanding shop environments. The caliper’s jaw geometry includes dedicated tips for stable contact on larger parts, while the robust slide mechanism resists wear—attributes that reduce downtime and maintenance costs over the life of the tool. Practical delivery and workplace integration The instrument is supplied ready for workshop use and comes packaged in a protective transport case for safe handling and storage between jobs. As an analogue vernier caliper, it requires no batteries and can be used in settings where electronics are undesirable. The combination of large measuring range, mechanical reliability and fine-adjustment control supports faster set-ups, fewer re-measurements and a smoother inspection workflow in everyday machine‑shop tasks. For dependable long-range workshop measurement from the Metav IndustryLine, contact Metav Werkzeuge to request the M201.345 or discuss suitability for specific components — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data Article number: M201.345 GTIN: 4054469101903 eCl@ss: 21170344 Model label: Workshop Caliper with Tips 1200x200x0.05mm SKU: M201.345 Core figures Measuring range: 1,200 mm Jaw length: 200 mm Resolution / graduation: 0.05 mm Tariff number: 90173000 Special features Monoblock construction Material: hardened stainless steel, matt‑chromed scale Fine-adjustment spindle Analogue vernier scales: 1/128" (top) and 1/20 mm (bottom) Conforms to DIN 862 for relevant jaw lengths Delivered in a transport case With tips for stable contact FAQ What measuring range does this caliper cover? The Workshop Caliper with Tips M201.345 covers a measuring range of 1,200 mm, making it suitable for long-format workshop components. How fine is the graduation and what accuracy can be expected? The analogue graduation is 0.05 mm; as an analogue instrument this corresponds to the standard industrial resolution recommended under DIN 862. Is the caliper suitable for harsh workshop environments? Yes, the caliper is made from hardened stainless steel with a matt‑chromed scale and is supplied in a transport case to protect it between jobs. Does the instrument include a fine-adjustment feature? The M201.345 is equipped with a fine-adjustment spindle to permit precise jaw positioning and quicker repetitive checks. Which vernier scales are fitted to the caliper? The instrument features vernier scales of 1/128 inch on the upper scale and 1/20 mm on the lower scale for flexible reading in either imperial or metric references. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200mm Workshop Caliper Without Probe Fine Adjustment For Outer, Inner And Step Measurements, Hardened Stainless Steel In Case - Metav IndustryLine
This long-range caliper combines a stainless, hardened measuring beam, a monoblock design and an accurate vernier for reliable workshop measurement. Benefit from fine-adjustment control and a 300 mm jaw length for stable clamping of larger components; order the caliper directly via Metav Werkzeuge or ask the consultants for application advice. Metav IndustryLine Workshop Caliper without Tip — 0–1200 mm, 0.02 mm Vernier A Metav IndustryLine Workshop Caliper without tip designed for long-range, heavy-duty workshop measurement and equipped for external, internal and step gauging in machinist environments. Hardened stainless steel construction Fine adjustment for precise setting Monoblock beam for high rigidity Dual vernier: 0.02 mm resolution Long-range stability for large components The caliper is engineered as a long-range measuring instrument with a 0–1200 mm span, placing it in the long-category for workshop calipers where reach and stiffness matter. The monoblock beam reduces torsion and improves reproducibility across the full measuring length, which means fewer re-measurements and higher throughput in repetitive tasks. This construction is particularly useful when checking large housings, long shafts or assembly fixtures where consistent guidance and minimal deflection are decisive for process reliability. Precise readout and controlled setting reduce operator error Measurement is effected via an analogue vernier with a 0.02 mm resolution (dual-scale format), offering familiar, robust readout without electronics. The integrated fine adjustment mechanism allows slow, controllable closure of the jaws for accurate positioning and repeatable results, while the dual vernier markings provide direct comparison between metric and inch indications. Together, the fine adjustment and vernier reduce typical human-introduced variation and support fast, confidence-led decisions on the shop floor. Practical handling features for workshop use Large 300 mm jaws facilitate secure contact on broader workpieces and hold alignment under clamping pressure. The caliper’s stainless, hardened material with a matt‑chrome scale improves scratch resistance and maintains legibility in challenging ambient conditions. The unit follows factory standards for production use and is supplied ready for immediate deployment in inspection benches or production cells. For shops requiring durable, mechanical measuring tools that avoid electronic service issues, this instrument provides a durable, low-maintenance solution. Application focus and efficiency gains Designed for external, internal and step measuring tasks, this caliper supports common workshop controls and fixture checks without the complexity of digital interfaces. Its robust build and precise adjustment translate into fewer stoppages and consistent part acceptance rates, which contributes directly to process efficiency. For production environments that prioritise mechanical reliability and simple verification procedures, the instrument is a practical, cost-efficient choice. Contact Metav Werkzeuge for tailored procurement advice on the Metav IndustryLine long-range caliper (SKU M201.317) and to confirm suitability for specific applications; Metav’s consultants in Emmerich are available to support selection and delivery. Technical Data Article number: M201.317 GTIN: 4054469101361 Weight: 8.3 kg Material: stainless steel, hardened; matt-chromed scale Measuring range: 0–1200 mm Facts Jaw length: 300 mm Resolution: 0.02 mm Vernier: 1/1000" top and 1/50 mm bottom Type: Analogue vernier caliper Norm: Werksnorm Special features Monoblock construction Fine adjustment for controlled measuring Suitable for external, internal and step measurements Long-range workshop classification FAQ What measuring range does this caliper cover? The Metav IndustryLine workshop caliper covers a measuring range of 0–1200 mm, suitable for long-range workshop and assembly measurements. How fine is the resolution and how is it read? Resolution is 0.02 mm, provided by the dual vernier (1/1000" top, 1/50 mm bottom) for clear analogue reading on the scale. Is the caliper suitable for heavy-duty workshop use? Yes; the hardened stainless steel beam and monoblock design ensure robustness and reduced torsion for demanding workshop environments. Which measurement types are possible with this instrument? The tool supports external, internal and step measurements as standard workshop functions. What is the article/supplier reference for ordering? Order using SKU M201.317 (Metav IndustryLine workshop caliper). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200mm Workshop Caliper Without Tips Fine Adjustment Monoblock Hardened Stainless Steel 0.05mm, 300mm Jaws - Metav IndustryLine
Take advantage of the 0–1200 mm measuring range, the monoblock hardened stainless‑steel construction and the precise fine‑adjustment mechanism for reliable, repeatable shop measurements; order the caliper directly via Metav Werkzeuge or consult Metav specialists for application matching. Workshop Caliper M201.350.1 — 0–1200 mm, Fine Adjustment, Monoblock (Metav IndustryLine) The Workshop Caliper M201.350.1 is a monoblock stainless‑steel caliper designed for robust shop use and long‑range measurements up to 1,200 mm, suitable for external, internal and step gauging in machine and tool rooms. *0–1200 mm measuring range for large components *Monoblock hardened stainless steel construction *Fine adjustment for reproducible positioning *Dual vernier scales: 1/128" and 1/20 mm resolution Reliable long‑range measurement with sustained stiffness The caliper’s 0–1200 mm range places it in the long‑range category for workshop measuring tools, making it appropriate for larger fixtures, housings and assemblies where single‑handed instruments must still offer good stiffness. The monoblock construction reduces flex and gives a stable reference over the full travel, which translates into fewer remeasurements and higher process throughput. This long‑range format balances reach and control, so larger components can be measured with consistent results in routine production and maintenance tasks. Precise setting and repeatability for everyday shop use Measurement reproducibility is supported by the mechanical vernier arrangement: the bottom scale presents a 1/20 mm division (mechanical resolution ≈ 0.05 mm), while the top scale gives imperial subdivisions at 1/128" — a practical dual‑scale solution for mixed‑unit environments. The integrated fine adjustment lets the operator micro‑position the jaws before taking a reading, reducing over‑travel and measurement scatter. For jaw lengths up to 200 mm, compliance is to DIN 862; for longer jaw assemblies the instrument follows the manufacturer’s production norm, which is customary for extended‑length instruments. Built for durability and clear reading in the workshop Manufactured from hardened stainless steel with a matt‑chromed scale, the instrument resists corrosion and maintains legibility under workshop lighting. The matt chrome finish reduces glare while protecting the graduation against wear, supporting faster reading and fewer interpretation errors during shift work. The robust material choice and hardened surfaces extend service life and sustain measurement quality under the mechanical stresses typical of industrial environments. Practical applications and handling benefits This caliper suits machine shops, toolrooms and fabrication shops that require a single instrument to cover external, internal and step measurements on larger parts. The long jaw length (300 mm) enables access to deeper recesses and wider diameters without auxiliary fixtures, while the monoblock profile and fine‑setting control promote repeatable positioning on mating surfaces. As a durable analogue instrument, it integrates easily into inspection benches and routine quality checks where straightforward, reliable dimensional data are needed. Contact Metav Werkzeuge for detailed technical advice on the Metav IndustryLine Workshop Caliper M201.350.1 and to arrange prompt delivery from Emmerich. Technical data Article number: M201.350.1 GTIN: 4054469101934 ECLASS: 21170344 Manufacturer: Metav IndustryLine Core specifications Measuring range: 0–1200 mm Jaw length: 300 mm Resolution (nonius): 1/128" (top), 1/20 mm (bottom) Construction: Monoblock Special features Material: Hardened stainless steel, matt‑chromed scale Fine adjustment mechanism Conforms to DIN 862 for jaw lengths ≤200 mm; factory norm for ≥250 mm Flat‑jaw configuration (without pointed measuring tips) Analog vernier instrument FAQ What measuring range does the caliper cover? The Workshop Caliper M201.350.1 covers a measuring range of 0–1200 mm, intended for larger components and long‑reach inspection tasks. What resolution and scales are provided? The instrument uses dual vernier scales: 1/20 mm on the lower scale (≈0.05 mm resolution) and 1/128" on the upper scale, enabling metric and imperial readings as required. Is the caliper suitable for heavy‑duty workshop use? Yes. The monoblock design and hardened stainless‑steel construction make the caliper robust for routine shop environments and repetitive measurement procedures. Which standards apply to this caliper? For jaw lengths up to 200 mm the device complies with DIN 862; for longer jaw assemblies the instrument follows the manufacturer’s norm, which is specified for extended‑length versions. Which types of measurement can be performed with this tool? The caliper supports external, internal and step measurements and is intended for general workshop dimensional checks on housings, fixtures and large components. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200mm Workshop Caliper Without Tips Monoblock Fine Adjustment 0.05mm Resolution 200mm Jaws Supplied in Case - Metav IndustryLine
Combine long measuring range, rigid monoblock construction and a precision fine‑adjustment for reliable, reproducible measurements on large components; order the caliper directly via Metav Werkzeuge or ask our consultants for application advice. Workshop Vernier Caliper M201.350 — long‑range analogue caliper with fine adjustment The Workshop Vernier Caliper M201.350 is a long‑range, monoblock analogue caliper designed for robust workshop use and measurement of large components in metalworking and toolmaking. 1,200 mm measuring range Hardened stainless steel body Precision fine‑adjustment screw Supplied in transport case Built for long‑range, reproducible measurement This instrument is engineered as a monoblock construction to maintain profile stiffness across its full span, which supports reproducible measurements on larger workpieces. With a measuring range of 0–1,200 mm, the caliper falls into the long‑range class commonly required for heavy machining, fixture and housing inspection; the extended range reduces the need for multiple measuring tools and shortens setup times. The structural rigidity and the matt‑chrome scale combine to limit deflection and improve readout consistency on long measurements. Precise mechanical reading and controlled adjustment Reading is achieved with a dual vernier system: 1/128" on the upper scale and 1/20 mm on the lower scale, equivalent to a mechanical resolution of 0.05 mm, which corresponds to the industrial standard for analogue workshop calipers. The integrated fine‑adjustment screw permits cautious approach and exact positioning of the jaws, reducing overshoot and operator‑induced scatter. For jaw lengths up to 200 mm this model complies with DIN 862, ensuring the measured values meet common workshop tolerance expectations and are easy to document during routine quality checks. Robust materials and workshop‑ready design Materials and surface finish are chosen for day‑to‑day resilience: hardened stainless steel body with a matt‑chromed scale resists corrosion and glare while the hardened jaws keep wear‑induced errors low. The monoblock setup minimises moving‑part looseness and enhances long‑term stability. For practical handling, the caliper is supplied in a transport case suitable for workshop logistics, protecting the instrument during transit and storage and simplifying on‑site handling when instruments are moved between benches or machines. Integration into the workshop and supplier assurance The instrument is aimed at workshops and industrial environments where long reach and mechanical reliability matter more than electronic outputs. It suits layout work, inspection of large housings and fixtures, and incoming material checks where a rugged analogue solution is preferred. Metav IndustryLine provides this caliper as part of a comprehensive supply approach: central stock and experience from Emmerich help ensure steady availability and consistent quality control. For specialised applications or clarification on fit‑for‑purpose, Metav Werkzeuge’s consultants are available to advise on suitable measuring strategies and complementary tools. Contact Metav Werkzeuge today for application guidance or to arrange supply of the Metav IndustryLine Workshop Vernier Caliper M201.350 and benefit from direct, workshop‑focused expertise Technical data Article number: M201.350 GTIN: 4054469101927 ECLASS: 21170344 Tariff number: 90173000 Facts Measuring range: 0–1,200 mm Jaw length: 200 mm Resolution: 0.05 mm (1/20 mm vernier) Vernier: 1/128" (upper), 1/20 mm (lower) Standard: DIN 862 for jaw length up to 200 mm; factory norm above 250 mm Special features Material: hardened stainless steel with matt‑chrome scale Monoblock construction Fine‑adjustment screw for precise closing Analogue vernier caliper (mechanical) Supplied in transport case FAQ What measuring range does this caliper cover? The Workshop Vernier Caliper M201.350 covers a measuring range of 0–1,200 mm, making it suitable for long‑reach workshop measurements and component inspection. How fine is the reading and what vernier scales are used? Reading is mechanical via dual verniers: 1/128" on the upper scale and 1/20 mm on the lower scale, giving a resolution of 0.05 mm consistent with workshop standards. Is the caliper suitable for heavy workshop use? Yes; the caliper’s monoblock construction and hardened stainless steel body provide the rigidity and wear resistance expected for demanding workshop environments. Does the instrument comply with recognised standards? For jaw lengths up to 200 mm the caliper conforms to DIN 862; values for larger jaws follow the manufacturer’s factory norm as indicated in the technical data. What is included with delivery? The caliper is supplied in a transport case to protect the instrument during handling and storage; the case supports safe workshop logistics and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Hier wird noch anderes html hinkommen um das wir uns später kümmern