messschieber beschriftung
Das hier ist der erste PLatzhalter
300mm Dial Caliper 0.01mm Resolution, Four-Function, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of a workshop‑grade dial caliper that combines fine resolution and practical handling: the large 45 mm dial and 0.01 mm graduation ensure precise readings, while the four measurement functions support a wide range of tasks; order or discuss the caliper with Metav Werkzeuge for a reliable delivery and application advice. Dial Caliper M202.036 — 0–300 mm, 0.01 mm dial, Metav IndustryLine A robust dial caliper M202.036 designed for general workshop and quality‑control use with a clear mechanical dial and DIN 862 conformity. Dial reading with 0.01 mm resolution Measuring range 0–300 mm standard workshop size Four functions: inside, outside, depth, step Reverse‑side thread pitch chart included Precision that speeds up workshop inspection The mechanical dial and finely graduated scale deliver repeatable measurements across the standard 0–300 mm range, classified as the standard category for general machinery and metalwork. With a 45 mm dial, readings are quick to interpret and the 0.01 mm graduation gives a level of detail that goes beyond coarse vernier tools, supporting tighter tolerances without complex electronics. This precision translates into fewer reworks and faster QA cycles, a clear rational advantage for production and maintenance environments where measured parts must fall consistently within specification. Four measurement modes for versatile tasks Equipped to perform outside, inside, depth and step measurements, the tool replaces multiple single‑purpose gauges and streamlines the inspection process. The long and short jaw geometry (60/25 mm) accommodates a variety of component sizes while keeping handling nimble at the bench. The built‑in thread pitch chart on the reverse side speeds up everyday checks on threaded components, reducing time spent consulting separate references and thereby improving workflow efficiency. Simple mechanics, dependable handling As an analog instrument constructed to DIN 862, the caliper emphasises mechanical robustness and intuitive operation. The dial drive avoids battery dependence and the tactile feel supports consistent application of measuring pressure, improving measurement constancy in routine use. For teams preferring straightforward tools that are easy to teach and maintain, this caliper offers an approachable balance of durability and measuring fidelity that supports both skilled machinists and workshop trainees. Practical delivery and traceable details The caliper comes supplied in a protective transport case and includes practical workshop aids such as the reverse‑side thread table; this ensures safe storage in transit and convenient reference on the shop floor. Conformity with DIN 862 is stated on the instrument, aligning it with common inspection standards. The compact mechanical design minimises downtime related to battery changes, while the dial diameter and jaw geometry make the instrument comfortable to read and manoeuvre during repetitive inspection tasks. Contact Metav Werkzeuge to discuss how the Metav IndustryLine dial caliper M202.036 fits your quality routine and to arrange supply directly from our Emmerich facility Technical data Article number: M202.036 GTIN: 4054469102252 Brand: Metav IndustryLine Category: Caliper / Dial caliper Conformity: DIN 862 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Dial diameter: 45 mm Jaw lengths: 60 mm / 25 mm Customs tariff number: 90173000 Special features Dial (mechanical) reading mechanism Four measurement functions: outside, inside, depth, step Thread pitch chart on reverse side Supplied in protective case for transport Analog instrument, no battery required FAQ What measuring range does this caliper cover? The Metav IndustryLine dial caliper M202.036 covers a measuring range of 0–300 mm, making it a standard‑range workshop instrument suitable for everyday machining and inspection tasks. How fine are the readings on the dial? Readings on this dial caliper are to 0.01 mm resolution; the 45 mm dial offers clear visibility for precise interpretation during routine measurements. Which measurement types can be performed with this caliper? The instrument supports four measurement types: outside, inside, depth and step measurements, so it replaces several single‑purpose gauges in common shop workflows. Is a case provided and what is it for? Yes, the caliper is supplied in a protective transport case to safeguard the instrument during transit and short‑term storage in the workshop. Does the caliper conform to inspection standards? The caliper is made to DIN 862, indicating compatibility with established mechanical caliper standards for workshop use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Dial Caliper 0.02mm Resolution Four-Function, Plastic Case, DIN 862 - Metav IndustryLine
Take advantage of a precise 0.02 mm graduation, a clear 45 mm dial and full four‑function measuring capability to streamline routine inspection tasks; order the caliper directly via Metav Werkzeuge or consult our advisors for application support. M202.032 Dial Caliper — 300 mm range, 0.02 mm resolution (Metav IndustryLine) The M202.032 dial caliper is a robust analogue measuring instrument designed for general workshop and precision mechanical use, offering a 300 mm measuring range and fine 0.02 mm graduation for repeatable dimension checks Precision 0.02 mm graduation 45 mm diameter dial for clear readings Four-function measuring capability Conforms to DIN 862 standard Precision where it matters for workshop quality control The instrument delivers a 0.02 mm graduation across a 300 mm span, which places it firmly in the standard caliper category for machine and metalworking shops. The fine scale enables reliable checks of small features while the long range covers the most common workshop tasks, so inspection routines become more efficient. Because the design follows DIN 862, the measuring results are compatible with common quality-control expectations and easily comparable across suppliers and inspection reports. Clear readings and versatile measurement modes A prominent 45 mm dial provides rapid visual confirmation of measurements, complementing the vernier layout for analogue precision. The device supports four‑function measuring: external, internal, depth and step measurements, reducing the need for multiple tools during a single inspection. The combination of dial readability and multi‑mode capability shortens measuring cycles and lowers the risk of handling errors during repeated checks. Built for everyday use and safe transport The caliper is produced as an analogue instrument with practical features such as a thread table on the reverse face for quick reference. It is supplied with a protective case for secure transport and storage, protecting the scale and dial from shocks and contamination between jobs. The balanced design keeps handling straightforward during single‑handed measuring tasks while maintaining the stiffness needed for repeatable results on typical workshop components. For traceable, workshop-grade measurement equipment, request a quote for the Metav IndustryLine M202.032 dial caliper from Metav Werkzeuge in Emmerich or contact our experts for application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M202.032 GTIN: 4054469102207 Category: Calipers (analogue dial caliper) Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution / graduation: 0.02 mm Dial diameter: 45 mm Reading (dial): 0.2 Special features Analogue (dial + vernier) Conforms to DIN 862 Four‑function measuring: external, internal, depth, step Thread table printed on reverse side for reference Supplied with protective transport case FAQ What measuring tasks is this caliper best suited for? The M202.032 dial caliper is intended for general workshop use and precision mechanical checks where a 300 mm range and 0.02 mm graduation cover typical component dimensions. Does the instrument support internal and depth measurements? Yes — the caliper provides four‑function measuring (external, internal, depth and step), enabling versatile inspection without changing tools. Is the reading standard traceable to industry norms? The caliper is manufactured to meet DIN 862, making its readings suitable for standard workshop quality control and comparable across suppliers. How is the caliper protected during transport and storage? The M202.032 is supplied in a protective case to safeguard the scale and dial against impact and contamination between jobs. Can the dial be read quickly under workshop lighting? The 45 mm diameter dial offers a clear, easy‑to‑read display that speeds up repetitive measurements and reduces operator fatigue. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Dial Caliper 0.02mm Resolution, Four-Function, DIN 862, Supplied in Case - Metav IndustryLine
Take advantage of the combination of clear analogue reading, robust mechanical design and DIN 862 compliance to secure reliable workshop measurements; order the dial caliper directly via Metav Werkzeuge or consult our specialists for application advice. Dial Caliper "TOP" 300 x 0.02 mm by Metav IndustryLine — analogue dial, 45 mm display Dial Caliper "TOP" 300 x 0.02 mm is an analogue dial caliper for general workshop and metalworking use, offering precise mechanical measurements up to 300 mm with a clear 45 mm dial display. 45 mm dial for fast reading 0.02 mm resolution for precise checks Four‑function measurement capability Locking screw for repeatable readings Consistent precision that supports quality control The analogue dial with a 45 mm face provides immediately legible readings, making routine checks both faster and less error‑prone. With a reading step of 0.02 mm, this caliper offers the highest grade of mechanical resolution commonly used in precision workshop tasks, which is especially valuable where sub‑millimetre reproducibility is required. Compliance with DIN 862 underlines suitability for standardised inspection routines, so measurement results can be relied upon for process control and incoming inspection. Designed for versatile measurement tasks This instrument combines four measurement modes — inside, outside, depth and step — in a compact form that suits everyday metalworking and maintenance work. The dual jaw lengths (60/25 mm) extend versatility for measuring narrow bores and stepped components without changing tools. A robust locking screw secures the slide for transfer measurements, improving repeatability when recording values or passing components between workstations. Practical features for workshop efficiency Built as a straightforward mechanical instrument, the caliper requires no batteries and delivers dependable readings in environments where electronics may be inconvenient. The rear‑side thread table supports quick reference during machining operations, reducing lookup time at the bench. The simple, tactile operation of an analogue dial instrument fosters rapid training for staff and predictable outcomes during repetitive measurement tasks. Contact Metav Werkzeuge for specific application advice on the Metav IndustryLine dial caliper "TOP" (SKU M202.132) and to arrange stock availability or a technical consultation tailored to workshop requirements. Technical data Article number: M202.132 GTIN: 4054469102306 EClass: 21170344 Category: Calipers (measuring instruments) Dimensions & accuracy Measuring range: 0–300 mm Resolution: 0.02 mm Dial diameter: 45 mm Jaw length: 60/25 mm Standard: DIN 862 Features & functions Analogue dial caliper Four‑way measurement: inside, outside, depth, step Locking screw (feststellschraube) Thread reference table on reverse (gewindetabelle auf der rückseite) FAQ What measurement tasks is this caliper suitable for? The dial caliper "TOP" is suitable for routine workshop measurements in metalworking and maintenance, covering outside, inside, depth and step measurements up to 300 mm. What accuracy and resolution can be expected? This analogue instrument delivers a resolution of 0.02 mm and is designed to meet the precision range typical for high‑quality mechanical calipers. Does the instrument meet industry standards? Yes, the caliper is specified to DIN 862, ensuring compatibility with standard inspection procedures. Are there practical features that speed up shopfloor work? The large 45 mm dial, locking screw and the thread table on the reverse of the slide are intended to reduce handling time and speed up repetitive measurement tasks with the caliper "TOP". Which identifier should be used when ordering or enquiring? Refer to SKU M202.132 and GTIN 4054469102306 when specifying the Metav IndustryLine dial caliper in purchase orders or technical enquiries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Dial Caliper 0.1mm Resolution Hardened Tips, Locking, Matt Chrome Scale - Metav IndustryLine
Take advantage of a 300 mm measuring range, 0.1 mm vernier reading and hardened measuring tips to secure robust, reproducible workshop measurements; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Divider Caliper 300 mm — Analogue Vernier 0.1 mm (Metav IndustryLine) The Divider Caliper 300 mm is an analogue workshop caliper designed for standard-range measurements up to 300 mm, ideal for everyday metalworking and mechanical assembly tasks. 300 mm measuring range 0.1 mm vernier resolution Hardened measuring tips Matt‑chromed scale and vernier Reliable measurement across standard workshop tasks This caliper provides a 300 mm reach in a Standard range format that balances span and stiffness for routine machining and assembly work. The analogue vernier with a 0.1 mm reading offers a straightforward, durable solution where fast visual checks and mechanical robustness matter more than sub‑millimetre laboratory precision. The vernier system allows repeatable readings without batteries, making the tool dependable on the shop floor and in mobile inspection scenarios. Durable build for repetitive use and long service life Constructed from special hardened steel, with the vernier and scale matt‑chromed, the instrument is built to resist wear and maintain legibility over prolonged use. The hardened measuring tips reduce edge wear and preserve measurement reliability when checking hardened parts or finished components. A mechanical locking screw secures the slide during transfer measurements, safeguarding the reading and improving reproducibility in serial inspections. Practical handling and clear scale layout for efficient workflows The classic vernier layout keeps interpretation simple and quick, supporting rapid throughput in production or maintenance workflows. The plain, matt‑chromed scale reduces glare while the robust slider and fixation mechanism facilitate steady contact pressure, which helps avoid inconsistent readings caused by changing grip. For teams seeking reliable, low‑maintenance calipers for general metalwork, this analogue instrument from Metav IndustryLine is a pragmatic choice that emphasises longevity and straightforward operation. Contact Metav Werkzeuge today to secure the Metav IndustryLine divider caliper and benefit from European stock, technical advice and dependable delivery from Emmerich Technical data Article number: M201.172 GTIN: 4054469164281 ECLASS: 21170344 Tariff number: 90173000 Category: Calipers Measurements / Core data Measuring range: 0–300 mm Resolution: 0.1 mm Type: Analogue vernier Materials / Special features Material: Special hardened steel Vernier and scale: Matt‑chromed Measuring tips: Hardened Locking screw: Included Suitable for: Ø600 FAQ What measuring range and accuracy does the caliper offer? The Divider Caliper 300 mm provides a measuring range of 0–300 mm with a vernier resolution of 0.1 mm, suitable for standard workshop tolerances. What material and surface finish are used? The instrument is made from special hardened steel; the vernier and scale are matt‑chromed for improved durability and reduced glare. Are the measuring tips suitable for hardened workpieces? Yes, the caliper features hardened measuring tips that resist wear when measuring tougher or finished surfaces. Does the caliper include a locking feature for stable readings? The Divider Caliper 300 mm is supplied with a locking screw to secure the slide and preserve the measured value during transfer. Is this caliper intended for everyday workshop use or lab inspection? Designed for everyday metalworking and mechanical assembly, the Metav IndustryLine Divider Caliper 300 mm balances robustness and practicality rather than ultra‑fine laboratory precision. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Divider Caliper With Carbide Tips 0.1mm Graduation, Hardened Steel - Metav IndustryLine
Take advantage of the combination of hardened special steel, carbide measuring tips and a 300 mm measuring range with a 0.1 mm vernier for reliable workshop measurement. Order the divider caliper directly via Metav Werkzeuge or ask our consultants if needed. Divider caliper 300 mm with carbide tips (Metav IndustryLine) — Standard precision caliper, 0.1 mm vernier Divider caliper 300 mm with carbide tips (Metav IndustryLine) is a purpose-built measuring instrument for standard workshop and metalworking tasks, designed to deliver robust, repeatable external and step measurements across a 0–300 mm range. Hardened special steel construction Carbide measuring tips for wear resistance Nonius vernier with 0.1 mm resolution Robust design for everyday industrial use Constructed from hardened special steel with a matt chrome-plated vernier and scale, this instrument resists wear and maintains legibility in workshop environments. The solid material choice reduces the risk of deformation during routine handling, which supports consistent measurement results over time. The locking screw provides stable clamping of the slide, preventing slippage during transfer of measurements and enhancing reproducibility for assembly and inspection tasks. Practical vernier system and suitable measuring class The analogue nonius vernier offers a 0.1 mm resolution, which places this caliper in the standard workshop class for machine and metalworking operations. That level of resolution is appropriate for general fabrication, fitting and inspection where robust, quick checks are required. The vernier mechanism is mechanically simple and reliable, avoiding battery dependence while still enabling fast readings; a brief familiarisation with vernier reading ensures accurate interpretation on the shop floor. Durable contact points for repeatable measurements Equipped with carbide measuring tips, the instrument delivers exceptional resistance to abrasion when contacting harder surfaces or frequently measured parts. This durability keeps the contact geometry stable and reduces the need for frequent replacement, which in turn supports long-term measurement consistency. The design is particularly beneficial where pointed contacts improve access to grooves, small diameters or step edges, turning a durable caliper into a dependable tool for everyday inspection duties. For reliable workshop measurement of components up to 300 mm choose the Metav IndustryLine divider caliper and contact Metav Werkzeuge for purchasing and technical advice via info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data SKU: M201.172.H GTIN: 4061905047756 Eclass: 21170344 Facts Measuring range: 0–300 mm Resolution (vernier): 0.1 mm Tariff number: 90173000 Special features Material: hardened special steel Surface: matt chrome-plated vernier and scale Measuring tips: carbide Scale type: analogue nonius (vernier) Locking screw for slide fixation Category: standard caliper (0–300 mm) FAQ What measuring range does this caliper cover? The divider caliper covers a measuring range of 0–300 mm, making it a standard workshop instrument suitable for general metalworking and assembly checks. How precise is the instrument and what does 0.1 mm mean in practice? The analogue nonius vernier provides a resolution of 0.1 mm, which is suited to routine fabrication tolerances and quick shop-floor inspections where robustness and speed are priorities. Are the measuring tips suitable for hard or abrasive parts? Yes, the carbide measuring tips are designed for wear resistance and maintain contact geometry when measuring harder surfaces, ensuring repeatable readings during frequent use. Is the caliper delivered calibrated? No specific calibration certificate is listed for this item; the instrument is supplied as a mechanical vernier caliper. If an accredited calibration is required, please enquire separately about available calibration services. What advantages does the Metav IndustryLine version offer? The Metav IndustryLine version combines robust materials, a matt chrome finish for reduced glare and readable scales, and durable carbide tips to support dependable measurements in everyday industrial environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Pocket Caliper 0.02mm Monoblock Matt Chrome, Pocket Size, Four-Function Measurement, Locking Screw, Plastic Case - Metav IndustryLine
Compact pocket format and robust monoblock construction combine for reliable workshop measuring with fine resolution and secure locking. Benefit from a clear 0.02 mm graduation and four measuring functions for versatile use. Order the caliper directly via Metav Werkzeuge or ask our consultants if needed. Pocket caliper M201.055 — 300 mm range, 0.02 mm graduation, Metav IndustryLine Pocket caliper M201.055 provides compact, workshop-ready measuring for routine and precision tasks in metalworking and general engineering. Pocket caliper, 300 mm range 0.02 mm graduation for fine measurements Monoblock, matt chrome finish Locking screw for stable readings Compact precision for everyday workshop tasks The pocket caliper is designed as a compact, sturdy measuring tool for the common needs of a machine shop or service bench. With a measuring range of 0–300 mm it fits the Standard class of calipers, offering the best balance of reach and stiffness for typical components. The matt chrome surface reduces reflections and wear, while the monoblock construction maintains alignment under regular handling. As an analogue instrument with a vernier scale, it delivers tactile feedback and straightforward readings that are familiar to experienced machinists. Versatile four‑function measuring saves time and reduces tool changes Equipped for internal, external, depth and step measurements, the instrument supports the four primary caliper tasks without swapping tools. This four-measurement capability shortens inspection cycles and reduces the risk of handling errors. The vernier format complements these functions by offering an intuitive, mechanical readout; practitioners benefit from immediate results without dependence on batteries or electronics. Reliable conformity and secure reading for production use Constructed from stainless steel with a matt chrome finish, the caliper conforms to DIN 862 for vernier calipers and includes a positive locking screw to hold jaws steady during transfer or marking. A thread table on the reverse side extends functionality for fast reference. The robust build supports repeated use on the shop floor while preserving measurement consistency, making the tool suitable for everyday quality checks and assembly tasks where dependable readings matter. Clear measurement language for mixed-experience teams The analogue scale simplifies training: apprentices learn mechanical measurement fundamentals while experienced technicians appreciate the direct feel of the vernier. The instrument’s 0.02 mm graduation suits workshop tolerances and routine quality control; when finer laboratory precision is required, separate high-precision instruments are recommended. For straightforward component checks, jigs and fixtures or incoming inspection, this caliper reduces downtime and streamlines routine verification. For specification advice or to secure the Metav IndustryLine pocket caliper M201.055 for the workshop, contact Metav Werkzeuge in Emmerich or consult our technical team for application matching Technical data Article number: M201.055 GTIN: 4054469100401 Tariff number: 90173000 Brand: Metav IndustryLine Label: Taschen-Messschieber 300x0,02mm mattverchromt, Monoblock, 0,35 kg Facts Measuring range: 0–300 mm Graduation / resolution: 0.02 mm Scale type: analogue vernier Standard: DIN 862 Four-function measuring capability Special features Material: stainless steel (inox) Finish: matt chrome Monoblock design Locking screw present Thread table on reverse side Internal, external, depth and step measurements (four-measurement) FAQ What measuring range does the caliper cover? The pocket caliper M201.055 covers a measuring range of 0–300 mm, suitable for standard workshop and machine‑shop tasks. What is the smallest division on the scale? The instrument provides a 0.02 mm graduation on an analogue vernier scale for fine workshop measurements. Which measurement types are possible with this caliper? Internal, external, depth and step measurements are all supported by the four‑function design of the Metav IndustryLine caliper M201.055. Is the caliper suitable for shop-floor use? Yes. The stainless steel construction, matt chrome finish and locking screw make the caliper robust and reliable for regular workshop inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Pocket Caliper 0.05mm Resolution Monoblock Matt Chrome, Monoblock, Four-Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Combine the 300 mm measuring range, familiar analogue vernier reading to 0.05 mm, and robust matt‑chromed stainless construction for dependable shop measurements; order the instrument directly via Metav Werkzeuge or consult our advisors for application advice. M201.053 Pocket Caliper — 300 mm vernier, 0.05 mm resolution (Metav IndustryLine) The M201.053 pocket caliper is a compact, analogue measuring instrument designed for standard workshop tasks up to 300 mm; it combines a matt‑chrome monoblock frame with vernier scales for practical, repeatable dimensional checks. Compact 300 mm pocket format Vernier resolution 0.05 mm Matt chrome monoblock stainless frame Includes protective transport case Precise, reliable measurements for everyday workshop use This analogue caliper is classified in the Standard range (measuring capacity up to 300 mm), which offers the best compromise between reach and stiffness for general machine and metalworking tasks. The vernier layout provides a readable 0.05 mm resolution, supporting precise checks without electronic dependence. Compliance with DIN 862 underlines suitability for routine quality control; thanks to the four‑way measurement capability — inside, outside, depth and step — the instrument covers the essential measurement tasks encountered on the shop floor. Robust, compact construction for portable use The instrument features a monoblock frame finished in matt chrome over stainless steel, delivering corrosion resistance and long service life in demanding environments. A locking or fixing screw secures the slider for stable readings during transfer or marking. The pocket‑sized form factor and the supplied protective case simplify transport and storage, making the caliper a practical companion for mobile inspection rounds or bench work where space is limited. Simple analogue operation and practical handling Reading the vernier is straightforward: note the main scale reading, then add the vernier line that aligns with the main scale for the fractional step. The caliper provides vernier scales in both systems (top: 1/128", bottom: 1/20–39 mm), which supports mixed‑unit workflows and quick checks without conversion tools. The mechanical design prioritises tactile feedback and reliability; this makes the tool especially handy where digital electronics are unnecessary or where robustness and immediate readability are preferred. The instrument from Metav IndustryLine is therefore well suited to workshop metrology, maintenance teams and quality inspectors who value dependable analogue measurement. Speak to Metav Werkzeuge for personalised measurement guidance and to specify the Metav IndustryLine pocket caliper M201.053 for consistent, shop‑ready precision. Technical Data Article number: M201.053 GTIN: 4054469100388 Standard: DIN 862 Facts Measuring range: 0–300 mm Resolution: 0.05 mm (vernier) Type: Analog vernier caliper Special features Material: stainless steel Finish: matt chrome monoblock frame Vernier scales: top 1/128" and bottom 1/20–39 mm Fixing screw Four‑way measurement: inside, outside, depth, step Delivered in protective case FAQ What is the intended application for this caliper? This pocket caliper M201.053 from Metav IndustryLine is intended for standard machine‑shop and metalworking measurements where a 0–300 mm range and robust analogue operation are required. Which measurement functions are available on the instrument? The caliper supports four‑way measurement — external, internal, depth and step — enabling versatile checks without changing tools. How accurate is the vernier and how is it read? The vernier provides a 0.05 mm resolution; read the main scale first, then add the vernier line that aligns with the main scale for the fractional value. The instrument includes both inch and metric vernier scales for mixed‑unit use. Is the caliper corrosion‑resistant? The matt chrome finish over a stainless steel monoblock frame gives effective resistance against corrosion and wear in workshop conditions. Is a calibration certificate included with the caliper? The M201.053 is supplied as a standard workshop instrument; an ISO 17025 calibration certificate is not included unless explicitly stated for a specific delivery. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Pocket Precision Caliper 0.05mm Resolution, Locking, Fine Adjustment, Matt Chrome Finish - Metav IndustryLine
Take advantage of a compact 0–300 mm measuring range combined with a vernier resolution of 0.05 mm and a practical fine-adjustment mechanism for reliable workshop checks; order the Pocket caliper M201.024 directly via Metav Werkzeuge or ask our consultants if needed. Pocket caliper M201.024 — pocket caliper with vernier and fine adjustment, Metav IndustryLine The Pocket caliper M201.024 is a compact analogue measuring instrument for everyday workshop and field use, offering precise linear measurements, a depth probe and a locking device for repeatable results. Compact 0–300 mm measuring range Vernier scale with 0.05 mm resolution Fine adjustment and locking screw Matte chrome finish on tool steel construction Precision where it counts for routine inspection Built around a classic vernier layout, this analogue caliper delivers 0.05 mm incremental readings that match the industrial standard for mechanical verniers. The dual-scale vernier arrangement provides fine resolution for external and internal measurements, while the integrated fine adjustment allows controlled approach to the measuring faces, reducing overshoot and measurement scatter. As a result, routine dimensional checks benefit from stable readings without the need for batteries or electronic components, ensuring dependable operation across shift changes and on-site inspections. Robust design for workshop and mobile use The main profile is manufactured from tool steel and finished with a matte chrome plating that reduces glare and improves resistance to everyday wear. A dedicated locking screw secures the jaw position for transport or transfer of dimensions, and the built-in depth gauge extends the instrument’s usefulness beyond simple jaw-to-jaw measurements. Together, these design choices create a tool that copes with the practical demands of metalworking, maintenance and field service, combining low maintenance with tangible durability. Measurement modes and handling benefits This caliper covers external, internal and depth measurements with one compact instrument, and the vernier layout is optimised for quick visual readings in standard workshop conditions. The instrument’s classification within the Standard (100–300 mm) range strikes a balance between reach and stiffness, making it suitable for general machine‑shop tasks such as component checks, assembly control and routine quality assurance. The absence of electronics simplifies handling and long-term storage, while the fine-adjustment feature supports precise alignment when measuring small features or close tolerances. Contact Metav Werkzeuge GmbH in Emmerich for tailored advice on workshop integration or to arrange purchase directly from our European warehouse, Metav Werkzeuge is ready to assist with specifications and delivery options. Technical Data Article number: M201.024 GTIN: 4054469100197 TARIC/HS code: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution: 0.05 mm (vernier) Analogue instrument: vernier type Dual vernier configuration for fine readings Special features Material: tool steel Finish: matte chrome plating Fine adjustment (feineinstellung) Locking screw for repeatability Depth gauge included Standard class (100–300 mm) Pocket caliper design, analogue operation Suitable for workshop and field measurements FAQ How accurate is the M201.024 pocket caliper for routine workshop checks? The M201.024 pocket caliper provides 0.05 mm vernier resolution, matching the common industrial analogue standard for mechanical calipers and making it suitable for everyday dimensional control in metalworking. Which measurement functions does this caliper support? The instrument covers external, internal and depth measurements via its jaws and integrated depth probe; the fine-adjustment and locking screw aid reproducible setting transfer with the M201.024 pocket caliper. What materials and finish are used on the caliper? The caliper is constructed from tool steel with a matte chrome finish to improve durability and reduce reflections during measurement tasks. Is the caliper suitable for mobile or field use? Yes — the compact pocket form factor, locking screw and analogue vernier format make this caliper practical for on-site and mobile inspection without reliance on batteries. Can the vernier be read quickly in workshop lighting? The dual vernier layout and matt finish are chosen to enhance contrast and legibility under typical workshop lighting conditions, supporting faster and more reliable readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Pocket Vernier Caliper 0.05mm Resolution Matt Chrome Stainless Steel Monoblock, Moment Lock, Depth Rod, Four-Point Measurement, DIN 862 - Metav IndustryLine
Take advantage of precision, robust Monoblock construction and repeatable measuring pressure for reliable workshop measurements; order the Pocket Vernier Caliper TOP 300 x 0.05 mm directly via Metav Werkzeuge or request advice from our consultants for specification matching. Pocket Vernier Caliper TOP 300 x 0.05 mm (Analogue, Monoblock) The Pocket Vernier Caliper TOP 300 x 0.05 mm is a compact, stainless‑steel analogue caliper designed for standard workshop and metalworking measurement tasks where portability and repeatable results are required. Pocket format, 300 mm measuring range Vernier resolution 0.05 mm, DIN 862 Moment locking for consistent measuring pressure Monoblock stainless steel, matt chrome finish Reliable range and repeatability for everyday workshop use This caliper covers a 0–300 mm measuring range, which places it in the workshop standard category: the best compromise between reach, stiffness and one‑hand operation. The mechanical vernier offers a resolution of 0.05 mm in accordance with DIN 862, providing an industry‑recognised baseline for routine quality control and machining tasks. The hardened stainless steel construction with a matt‑chrome finish reduces surface wear and keeps the scale legible over prolonged use, supporting consistent, traceable measurements across production runs. Consistent measuring pressure and four measurement modes A defining functional advantage is the moment locking mechanism that secures the slider at a defined clamping torque. This reduces variation caused by different operator pressure and improves reproducibility when comparing multiple parts. The instrument supports four‑way measurement — outside, inside, depth and step — and the calibrated depth probe extends the tool’s usefulness beyond simple gap checks. For repetitive tasks this translates into fewer re‑measurements and lower process variability. Robust design and practical handling details The monoblock body increases torsional stiffness for reliable readings over the full 300 mm span while keeping the unit compact enough for mobile use. A clear vernier arrangement (upper scale 1/128", lower scale 1/20–39 mm) provides traditional analogue readability without reliance on electronics, which suits environments where robustness and simplicity are priorities. Additional practical features include a thread table printed on the reverse side and a beak geometry (60/25 mm) that balances reach and accessibility for small features. Workshop integration and quality assurance Delivered with a transport case for secure handling and storage, this caliper is ready for immediate use in machine shops, toolrooms and inspection benches. The hardened measuring surfaces and matt finish minimise wear, helping the instrument retain its calibration over time. For organisations seeking traceability, the product specification, material and conformity to DIN 862 provide a clear basis for integration into inspection routines and production control. For dependable, compact precision with Monoblock stability, contact Metav Werkzeuge for purchasing guidance or to arrange prompt delivery from Emmerich. Technical Data SKU: M201.078 GTIN: 4054469100500 Label: Taschen‑Messschieber TOP 300x0,05mm Momentverstellungf. mattverchromt, INOX, Monoblock Facts Measuring range: 0–300 mm Resolution: 0.05 mm Weight: 0.36 kg Beak length: 60/25 mm Standard: DIN 862 Special features Material: stainless steel, matt chrome, fully hardened Moment locking for repeatable clamping pressure Monoblock construction for increased stiffness Vernier scales: 1/128" upper, 1/20–39 mm lower Four‑way measurement: outside, inside, depth, step Thread chart on the reverse side Delivered in a transport case Analogue vernier instrument FAQ Is this caliper suitable for general machine‑shop work? The Pocket Vernier Caliper TOP 300 x 0.05 mm is designed for standard machine‑shop and metalworking tasks; its 0–300 mm range and DIN 862 conformity make it a universal everyday instrument. Does the caliper offer consistent results between operators? Yes, the moment locking feature on the TOP 300 x 0.05 mm secures slider pressure to reduce operator‑dependent variation and improve repeatability. What measurement types can be performed with this instrument? The caliper supports outside, inside, depth and step measurements; the depth probe and beak geometry extend its practical use for multiple inspection tasks. Is the measuring surface protected against wear? The hardened stainless steel construction with a matt‑chrome finish provides durable measuring faces that resist wear and help maintain scale legibility. Is a case included for storage and transport? A transport case is supplied with the instrument to protect the caliper in transit and during storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper 0.02mm Resolution Monoblock Matt Chrome, Moment Lock, Depth Rod, Four-Point Measurement - Metav IndustryLine
Take advantage of precise 0–300 mm measurement capability, a 0.02 mm vernier resolution and a robust monoblock stainless‑steel build for reliable workshop checks; order the caliper directly via Metav Werkzeuge or consult our technical advisors if specification clarification is required. M201.056 Pocket Caliper — 0–300 mm, 0.02 mm vernier (Metav IndustryLine) The M201.056 is a pocket caliper designed for everyday workshop control and fine mechanical work, combining a compact format with a matt chrome‑plated monoblock construction and a repeatable moment lock. Compact pocket caliper design Resolution 0.02 mm for precise readings Moment lock for repeatable clamping Supplied in protective case Precision where it counts The instrument delivers a 0–300 mm measuring range with a 0.02 mm vernier graduation, placing it in the Standard caliper class (100–300 mm) ideal for most machine‑shop and metalworking tasks. The analogue vernier adheres to DIN 862, providing a clear mechanical readout and a reliable tolerance band for routine quality control. The measured values are immediately usable for incoming inspections and production checks, while the mechanical vernier avoids battery dependency and offers tactile confirmation during adjustment. Designed for compact workshops and mobile use The pocket format and matt chrome finish reduce reflection and make the tool convenient to carry between benches or on the shop floor. The monoblock construction increases torsional rigidity, so measurements remain stable even when used single‑handed. The compact jaw geometry also supports measurements in tighter assemblies, and the short external‑jaw length offers improved access for small parts while preserving stiffness for repeatable results. Built for repeatability and practical handling A dedicated moment lock secures the slider at a consistent clamping torque, removing variation caused by manual overtightening and improving reproducibility across repeated checks. The caliper supports four‑way measurement — external, internal, depth and step — making it versatile for fixtures, housings and small components. A thread table on the reverse side provides a quick reference for common thread pitches during assembly or inspection tasks. Small details that save time in production Practical features include clearly graduated jaws (60/25 mm spec for jaw lengths) and a protective case for transport and storage, ensuring the instrument stays serviceable between uses. The analogue design means immediate operation without setup, and compliance with workshop standards ensures compatibility with existing inspection routines. The combination of robust stainless construction and straightforward mechanical reading reduces downtime and maintenance complexity. For precise, reliable workshop measurement consult Metav Werkzeuge and secure the Metav IndustryLine M201.056 pocket caliper with technical guidance tailored to production needs — contact our advisors in Emmerich for specification support and delivery arrangements Technical Data Article number: M201.056 GTIN: 4054469100418 Brand: Metav IndustryLine Label: Pocket caliper 0–300 mm, 0.02 mm, moment lock Category: Calipers Facts Measuring range: 0–300 mm Resolution / vernier graduation: 0.02 mm Jaw lengths: 60 / 25 mm Tariff number: 90173000 Standard: DIN 862 Special features Moment locking mechanism Monoblock stainless‑steel construction Matt chrome plating Four‑fold measurement: external, internal, depth, step Thread table on reverse side Supplied in protective case Analogue vernier design (no battery) FAQ What measuring range and resolution does this caliper offer? The Metav IndustryLine M201.056 pocket caliper offers a measuring range of 0–300 mm with a vernier graduation of 0.02 mm, suitable for standard workshop inspection tasks. Is the caliper suitable for internal and depth measurements? Yes, the instrument provides four‑way measurement capability — external, internal, depth and step — making it adaptable to a range of workshop applications. How does the moment lock improve measurement consistency? The moment lock on the M201.056 fixes the slider at a controlled clamping torque, preventing measurement variation caused by differing hand pressure and improving repeatability. Does the caliper conform to recognised standards? The caliper is manufactured in accordance with DIN 862, offering a familiar mechanical reading method for quality control procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper 0.05mm Resolution Monoblock, Moment Lock, Four-Function Measurement, Matt Chrome Case - Metav IndustryLine
Take advantage of a compact, workshop-ready design that combines reliable 0.05 mm resolution, robust stainless steel monoblock construction, and a repeatable moment locking mechanism for consistent clamping. Order directly via Metav Werkzeuge or consult the Metav team for application advice and availability. M201.054 Pocket Caliper — 0–300 mm, 0.05 mm, Metav IndustryLine M201.054 is a pocket-sized precision caliper designed for everyday metrology tasks in the workshop and quality-control bench, offering durable stainless-steel construction and an analog nonius for quick, reliable readings. Pocket caliper 0–300 mm, scale 0.05 mm Monoblock stainless steel construction Moment locking for repeatable clamping Four-function measurement: int./ext./depth/step Consistent precision for routine inspection and production control This pocket caliper delivers industrial-grade precision with a reading increment of 0.05 mm, matching the common workshop standard for reliable tolerance checks. The analogue nonius provides a direct visual measurement method that is easy to interpret for trained personnel, while the moment locking mechanism stabilises the jaw position for repeatable measurements. Together, these features reduce measurement scatter and help maintain consistent part quality during batch inspections, making the tool a pragmatic addition to both machine shops and service benches. Durable design that copes with daily handling Engineered as a monoblock instrument in stainless steel with a matte-chrome finish, this caliper resists corrosion and stands up to frequent handling. The compact footprint and pocket form factor suit technicians who move between machines or job sites, while the solid construction keeps the scale alignment stable over time. The combination of robust materials and straightforward mechanics lowers downtime and maintenance effort, supporting efficient workflows in busy production environments. Four measurement functions for versatile workshop tasks Equipped for outside, inside, depth and step measurements, the caliper offers practical versatility on a single tool. The integrated depth gauge extends measurement capability to recesses and bores, while the step measurement geometry enables fast checks of shoulders and offsets. This multi-function approach reduces tool changes and speeds up process checks, providing clear time-savings during set-up and troubleshooting without sacrificing measurement reliability. Proven standards and readable scaling for everyday use Designed to DIN 862, the instrument follows recognised workshop tolerances and handling conventions, simplifying documentation and inspection reporting. The analogue scale includes a dual nonius arrangement for fine graduations, allowing millimetre and inch-related cross-checks where needed. For users accustomed to digital readouts, the tactile feedback and immediate legibility of the nonius often improve reading discipline and reduce misinterpretation during quick checks at the machine. Contact Metav Werkzeuge for stock status, technical clarification and ordering for the M201.054 pocket caliper — local supply from Emmerich with practical delivery options and expert advice Technical data Article number: M201.054 GTIN: 4054469100395 ECLASS: 21170344 Customs tariff number: 90173000 Standard: DIN 862 Core specifications Measuring range: 0–300 mm Resolution: 0.05 mm Nonius: 1/128" (top); 1/20–39 mm (bottom) Jaw lengths: 60 / 25 mm Four-function measurement: inside, outside, depth, step Special features Material: stainless steel (inox) Construction: monoblock design Finish: matte chrome Mechanism: moment locking for repeatable clamping Scale type: analogue nonius Accessories: thread table printed on reverse side FAQ How precise is the M201.054 pocket caliper for routine inspections? The M201.054 pocket caliper provides a reading increment of 0.05 mm, which corresponds to the typical industrial analogue standard for reliable workshop measurements under DIN 862. Can the caliper measure depth and steps as well as external dimensions? Yes, the instrument supports four-function measurement: external, internal, depth and step measurements, enabled by the integrated depth gauge and step geometry. Is the caliper suitable for portable use on the shop floor? The stainless-steel monoblock design and compact pocket form make this caliper robust for portable shop-floor use while maintaining scale stability during routine handling. Does the caliper include a locking device for repeatable readings? The tool features a moment locking mechanism that ensures stable jaw clamping and helps to achieve repeatable measurements across multiple parts. What standard does the caliper conform to and how is the scale arranged? The caliper is manufactured to DIN 862 and uses an analogue nonius with both millimetre and inch-related graduations for straightforward cross-referencing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper Pocket Analog 0.05mm Resolution Monoblock Matt Chrome Inox, Four-Point, Lock Screw - Metav IndustryLine
The compact combination of robust monoblock construction and 0.05 mm vernier accuracy delivers dependable workshop measurements in a pocket-ready format; benefit from a stainless steel body and integrated locking screw for repeatable results. Order the instrument directly via Metav Werkzeuge or consult our advisors for application guidance. Pocket Caliper TOP 300 x 0.05 mm — analogue, monoblock stainless steel The Pocket Caliper TOP 300 x 0.05 mm is a compact analogue caliper designed for everyday workshop and machine‑shop measurement tasks, offering a sturdy monoblock body and a DIN‑compliant vernier. Pocket monoblock stainless steel body Measurement range 0–300 mm Vernier resolution 0.05 mm Includes locking screw and thread table Precision where it matters in the workshop The compact analogue caliper is built for reliable results in routine quality checks. With a measuring range of 0–300 mm and a vernier resolution of 0.05 mm, the instrument fulfils common workshop tolerances while conforming to DIN 862. The monoblock stainless steel construction raises rigidity and reduces flex, which directly improves repeatability for external and internal measurements. The integrated locking screw ensures that a set value remains fixed during transfer or comparison, helping to avoid handling errors. For machinists and maintenance technicians this equates to quicker inspection cycles and fewer rechecks. Designed for portability without compromise This pocket caliper combines portability with substantive workshop features. Weighing 0.43 kg, the tool is light enough for transport yet substantial enough to feel stable in the hand. As an analogue instrument there are no batteries to replace, which simplifies long‑term use and reduces downtime. A thread table printed on the reverse provides quick reference for screw measurements, turning the caliper into a practical multi‑purpose instrument during on‑site checks. The result is increased confidence in fast measurement tasks and a reduced need for multiple tools. Robust finish and versatile measuring functions Engineered for daily use, the caliper features a matt chrome finish over stainless steel for improved wear and corrosion resistance in workshop environments. The vernier scales include a fine top reading (1/128") and additional bottom graduations (1/20–39 mm), enabling classic analogue precision without electronic dependence. The tool supports four measurement functions — external, internal, depth and step — which covers the majority of inspection needs on components and assemblies. These practical attributes make the caliper a reliable choice for production, fitting and maintenance work. For the proven accuracy of the Metav IndustryLine pocket caliper and practical workshop design, contact Metav Werkzeuge for personalised advice and delivery from Emmerich Technical data Article number: M201.077 GTIN: 4054469100494 ECLASS: 21170344 Tariff number: 90173000 SKU: M201.077 Facts Measuring range: 0–300 mm Resolution: 0.05 mm Weight: 0.43 kg Norm: DIN 862 Analogue: yes Special features Material: inox (stainless steel) Monoblock design Vernier: 1/128" top; 1/20–39 mm bottom Locking screw present Thread table on reverse Four measurement functions: inside, outside, depth, step FAQ What accuracy can be expected from this caliper? The Pocket Caliper TOP 300 x 0.05 mm (Metav IndustryLine, SKU M201.077) provides analogue vernier readings to 0.05 mm, meeting standard workshop tolerances under DIN 862. Is the caliper suitable for internal and depth measurements? Yes. The caliper supports external, internal, depth and step measurements as standard, enabling the four measurement functions commonly required in machining and assembly checks. Does the tool require batteries or electronics? No. The instrument is an analogue vernier caliper and operates without batteries, offering maintenance‑free measuring for routine use. What material is the caliper made from and how durable is the finish? The caliper is manufactured from stainless steel (INOX) with a matt chrome finish for enhanced corrosion resistance and long service life in workshop conditions. Is there a reference for thread sizes on the tool? A thread table is printed on the reverse of the caliper for quick reference during screw and thread inspections with the Pocket Caliper TOP 300 x 0.05 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper With Pointed Jaws, Fine Adjustment, Hardened Stainless Steel, 0.02mm Vernier, Supplied In Case - Metav IndustryLine
Combining a hardened stainless steel body with a fine-adjustment mechanism and a 0.02 mm vernier scale delivers repeatable workshop measurements for daily production tasks; order the caliper directly via Metav Werkzeuge or consult the Metav specialists for procurement and application advice. Workshop Caliper M201.303 – stainless, hardened, 300 mm with fine adjustment Workshop Caliper M201.303 is a robust analogue caliper designed for accurate outside, inside and step measurements across general metalworking and assembly tasks. Hardened stainless steel construction Precision scale with 0.02 mm resolution Fine-adjustment thumb screw Monoblock frame with 100 mm jaws Built to last for everyday workshop use The slide and frame are made from stainless steel, hardened for wear resistance and fitted with a matt-chromed scale to reduce glare and preserve legibility under harsh workshop lighting. The monoblock design increases rigidity and reduces torsion during use, which helps maintain measurement accuracy over time. At approximately 0.7 kg, the instrument balances solidity with manageable handling, and the extended 100 mm jaws allow secure gripping of workpieces without sacrificing control. Precise reading and controlled contact force Equipped with a vernier scale that offers 0.02 mm resolution, the caliper ensures measurements that meet typical workshop tolerances. The dual vernier layout provides finely graduated readings—metric graduations supported by a clear secondary scale—while the dedicated fine-adjustment thumb screw permits delicate sliding for exact closure and alignment. These features reduce reading errors and enable reliable measurements for component checks, setup tasks and quality control where consistent, reproducible results are required. Designed for standard workshop ranges and practical use With a measuring range of 0–300 mm, the instrument falls into the Standard category, offering the best compromise between reach and stiffness for everyday machine‑shop and metal‑fabrication work. The caliper is intended for routine dimensional checks on shafts, housings and machined parts, and its construction supports use in fabrication, maintenance and small-series production environments. The tool is delivered to factory standard; the supplied configuration reflects workshop expectations for durability and simple, low‑maintenance operation. Choose the Metav IndustryLine caliper for robust, accurate measurements and contact Metav Werkzeuge for tailored advice and reliable supply direct from Emmerich. Technical Data SKU: M201.303 GTIN: 4054469101262 Weight: 0.7 kg Material: stainless steel, hardened with matt‑chromed scale Label: Workshop Caliper 300 x 100 x 0.02 mm Dimensions & Performance Measuring range: 0–300 mm Jaw length: 100 mm Resolution: 0.02 mm Vernier: top 1/1000 inch, bottom 1/50 mm Tariff number: 90173000 Special features For external, internal and step measurement Monoblock frame for increased rigidity Fine-adjustment thumb screw Factory standard (Werksnorm) Analogue vernier instrument FAQ What measuring range does this caliper cover? The Workshop Caliper M201.303 covers a measuring range of 0–300 mm and is classified in the Standard category for general machine‑shop use. Which materials is the caliper suitable for inspecting? The stainless steel, hardened construction of this vernier caliper makes the instrument suitable for routine inspection of steel, aluminium and similar workshop materials. How fine are the vernier graduations and what accuracy is expected? The vernier provides a 0.02 mm resolution; with correct technique this enables repeatable workshop measurements that meet common machining tolerances. Does the instrument include a fine adjustment for precise sliding? Yes, the caliper features a fine‑adjustment thumb screw to permit controlled sliding and exact alignment when taking measurements. Is this caliper suitable for internal and step measurements as well as outside checks? Yes, the design supports external, internal and step measurements, making it versatile for component inspection and setup tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper With Pointed Jaws, Fine Adjustment, Monoblock, Stainless Hardened Scale, 0.05mm - Metav IndustryLine
Take advantage of the combination of hardened stainless steel, monoblock rigidity and a precise fine adjustment for dependable workshop measurements; order directly via Metav Werkzeuge or contact our consultants for specification advice. Workshop caliper with pointed jaws M201.331.1 — 300 mm, fine adjustment (Metav IndustryLine) The Workshop caliper with pointed jaws M201.331.1 is an analogue precision instrument designed for standard workshop measurements and component inspection, offering robust construction and a vernier scale for reliable repeatability. Monoblock design for enhanced stiffness Hardened stainless steel construction Fine adjustment for precise readings Built for reliable daily use The instrument combines a hardened stainless steel construction with a monoblock design, yielding a rigid beam that resists bending during typical workshop handling. This configuration reduces measurement variation caused by flexing and supports reproducible results across routine inspection tasks. The matt-chromed scale improves legibility under workshop lighting, while the pointed jaw geometry permits access to tight grooves and small features that blunt jaws cannot reach, so tasks such as checking small machined features are carried out with greater confidence. How the analogue vernier supports precise readings This analogue caliper uses a vernier arrangement with a practical resolution of 0.05 mm, backed by a dual-scale nonius: 1/128" on the upper scale and 1/20 mm on the lower scale. The inclusion of a fine adjustment screw enables controlled closure of the jaws, limiting operator-induced error during final reading. The measuring geometry and scale conformity follow DIN 862 for the given jaw length, ensuring the device meets recognised workshop standards for vernier calipers and making interpretation straightforward even for users more familiar with metric indications. Practical handling, protection and workshop suitability With a 300 mm measurement range, this caliper sits in the Standard class — the versatile length preferred across general mechanical and metalworking shops for its balance of reach and stiffness. Delivery in a protective case ensures safe transport and storage, protecting the sliding surfaces and scale during routine movement between workstations. The combination of corrosion-resistant material and a robust finish reduces maintenance needs, promoting long service life in industrial environments where tools are subject to frequent use. Contact Metav Werkzeuge for tailored advice and to secure the Metav IndustryLine workshop caliper M201.331.1 for your toolroom or production line Technical Data Article number: M201.331.1 GTIN: 4054469101668 eCl@ss: 21170344 Label: Werkstatt-Messschieber mit Spitze 300x150x0,05mm rostfrei, mit Feineinstelung, Monoblock, 0,78 kg Facts Measurement range: 0–300 mm Jaw length: 150 mm Resolution: 0.05 mm Vernier: 1/128" (upper) and 1/20 mm (lower) Customs tariff number: 90173000 Special features Material: hardened stainless steel with matt-chromed scale Monoblock design for increased stiffness Fine adjustment screw for controlled closing Analogue vernier (mechanical nonius) Pointed jaws for access to narrow features Protective case included Conforms to DIN 862 for the given jaw length FAQ What measurement range does this caliper cover? The Workshop caliper with pointed jaws M201.331.1 covers a measurement range of 0–300 mm, placing it in the Standard category for general workshop use. What accuracy and resolution can be expected? The instrument offers a practical resolution of 0.05 mm using an analogue vernier; the fine adjustment aids reproducible readings during final closure and measurement. Which materials and finishes are used on the device? The caliper is manufactured from hardened stainless steel and features a matt-chromed scale to enhance corrosion resistance and improve legibility in workshop conditions. Is a case supplied with the caliper? Yes, the M201.331.1 is supplied in a protective case suitable for transport and storage, helping to preserve the sliding surfaces and scale. Does the caliper follow recognised standards? The measuring geometry and scale conform to DIN 862 for the relevant jaw length, ensuring the device aligns with common workshop standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper Workshop Jawless 0.05mm Nonius Matt Chrome Scale, DIN 862 - Metav IndustryLine
Take advantage of a sturdy stainless steel construction, 0.05 mm vernier accuracy and a 300 mm measuring range for reliable workshop measurements; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. M201.392 Workshop Caliper — 300 mm range, 0.05 mm vernier (Metav IndustryLine) The M201.392 is a workshop caliper without pointed jaws, designed for general metalworking and routine dimensional checks in machine shops and toolrooms. 300 mm measuring range 0.05 mm vernier resolution Stainless steel construction, matt‑chromed scale DIN 862 compliant for workshop use Precision and durability for everyday workshop measurement The caliper provides a 300 mm measuring range combined with a 0.05 mm vernier resolution, meeting DIN 862 requirements for workshop instruments. Constructed from stainless steel with a matt‑chromed scale and vernier, the tool balances corrosion resistance with legible contrast on the scale. The extended jaw length (100 mm) improves contact stability, reducing deflection during routine measurements and supporting consistent results across typical machining and assembly tasks. Clear, reliable readings with analogue vernier operation An analogue vernier remains a dependable choice where battery‑free operation and mechanical simplicity are priorities. The graduated vernier offers a 0.05 mm indication and the inch subdivision of 1/128 inch for imperial reference marks. At approximately 0.7 kg, the instrument sits securely in the hand, aiding steady measurement transfer and repeatability. The absence of electronics also simplifies maintenance and long‑term availability of spare parts. Designed to suit workshop workflows and quality checks Made for everyday use in workshops and light industrial settings, the caliper’s material and finish tolerate common shop environments while preserving dimensional stability. The matt‑chrome scale reduces glare under workshop lighting, which helps operators read values faster and reduces misreads. Compliance with recognised standards and a robust build make this instrument a pragmatic choice for routine quality control and production measurement tasks. For a dependable, DIN‑compliant workshop caliper from Metav IndustryLine, contact Metav Werkzeuge for guidance or procurement—info@metav-werkzeuge.com or +49 2822 7131930; request the M201.392 for immediate dispatch. Technical data Article number: M201.392 GTIN: 4054469102108 Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution (vernier): 0.05 mm Inch reading: 1/128 inch Jaw length: 100 mm Weight: 0.7 kg Standard: DIN 862 Tariff number: 90173000 Special features Material: stainless steel; scale and vernier matt‑chromed Analog vernier display (no batteries) Workshop version without pointed jaws eClass: 21170344 FAQ How precise is the M201.392 for routine workshop measurements? The M201.392 offers a vernier resolution of 0.05 mm and conforms to DIN 862, making it suitable for standard machine‑shop tolerances and general quality control. Does the caliper provide imperial readings? Yes. The analogue vernier includes an imperial subdivision equivalent to 1/128 inch for quick inch‑based references alongside metric measurements. Is the caliper suitable for metalworking environments? The caliper’s stainless steel construction and matt‑chromed scale are designed for workshop conditions and common metalworking applications; it is robust enough for daily use in machine shops. What measurements can be taken with this workshop caliper? The instrument supports typical caliper functions such as external and internal measurements and depth gauging, suitable for parts and assemblies within the 0–300 mm range. How does the M201.392 compare to digital calipers for shop use? As an analogue instrument, the M201.392 requires no batteries and offers mechanically straightforward, reliable readings; it is particularly valued where simplicity, durability and compliance with DIN 862 are preferred. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper Workshop Jawless 0.05mm Vernier With Fine Adjustment, Hardened Stainless Steel Case - Metav IndustryLine
Take advantage of precise daily measuring with a hardened stainless‑steel frame and a reliable 0.05 mm vernier — ideal for routine workshop tasks where robustness and clear readings matter. Benefit from the fine‑adjustment thumbwheel and the monoblock construction for steady, repeatable measurements. Order via Metav Werkzeuge or consult the Metav team for specification guidance. Metav IndustryLine Workshop Caliper M201.321.1 — 300 mm, hardened stainless, 0.05 mm resolution The Metav IndustryLine workshop caliper M201.321.1 is a durable analogue caliper designed for general machine‑shop and maintenance use, offering clear vernier readings and a precision thumbwheel for controlled jaws movement. Hardened stainless steel construction Fine‑adjustment thumbwheel for precise setting Vernier resolution of 0.05 mm Monoblock frame for increased stability Reliable workshop accuracy and practical classification The caliper is built for the standard range of workshop measuring tasks: its 0–300 mm span places it in the Standard category, offering the best compromise between reach and stiffness for everyday machine‑shop work. With an analogue vernier resolution of 0.05 mm, the instrument matches the industrial benchmark for mechanical calipers and is suitable for routine dimensional checks on assembled parts and components. The hardened stainless‑steel body resists wear and maintains measurement geometry, so readings stay consistent even after repeated daily use. Controlled setting and robust design for repeatable results A dedicated fine‑adjustment thumbwheel enables controlled closure of the jaws, reducing measurement scatter caused by manual over‑pressing and improving repeatability during series checks. The monoblock frame increases torsional rigidity compared with split‑body designs, improving stability when measuring longer jaws such as the 150 mm beak length supplied. The matt‑chromed scale reduces glare and eases reading under workshop lighting, while hardened surfaces extend service life under abrasive or oily conditions. Standards, scale and practical handling explained The vernier scale follows recognised workshop conventions and the instrument references DIN 862 for jaw geometries where applicable, which supports straightforward interpretation of mechanical tolerances on drawings. Reading the vernier at 0.05 mm resolution is intuitive for trained staff and provides the speed of analogue operation without dependence on batteries or electronics. The caliper’s simple mechanical design reduces downtime and maintenance requirements, making it a pragmatic choice for manufacturing, maintenance and toolroom environments. Choose the Metav IndustryLine workshop caliper for reliable everyday precision and contact Metav Werkzeuge in Emmerich for tailored advice and purchasing support Technical data Article number: M201.321.1 GTIN: 4054469101439 eClass: 21170344 Category: Calipers Label: Werkstatt‑Messschieber ohne Spitze 300x150x0,05mm rostfrei, mit Feineinstellung Facts Measuring range: 0–300 mm Maximum measuring range (mm): 300 Jaw (beak) length (mm): 150 Resolution: 0.05 mm SKU: M201.321.1 Special features Material: hardened stainless steel with matt‑chromed scale Construction: monoblock frame Scale type: analogue vernier Fine adjustment: thumbwheel for precise jaw control Norms: DIN 862 (applies up to specified jaw lengths) FAQ What measuring range does the Metav IndustryLine workshop caliper M201.321.1 cover? The Metav IndustryLine workshop caliper M201.321.1 covers a measuring range of 0–300 mm, placing it in the Standard class commonly used across machine shops and maintenance departments. What is the resolution and typical precision of the vernier on this caliper? The vernier provides a resolution of 0.05 mm, which corresponds to the industrially accepted analogue standard for mechanical calipers and suits most workshop tolerance checks. Which materials and finish are used on the M201.321.1 caliper? The caliper is manufactured from hardened stainless steel and features a matt‑chromed scale to reduce reflections and improve legibility in typical workshop lighting. Is the design of this caliper suited to frequent workshop use? The M201.321.1’s monoblock construction, hardened surfaces and fine‑adjustment thumbwheel make it well suited for frequent daily use, offering robust handling and repeatable measurements. Which scale standard applies to the jaws and how does this affect measurements? Jaw geometries reference DIN 862 where applicable, ensuring compatibility with conventional measurement practice and predictable functional behaviour for typical workshop applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper Workshop Version Fine Adjustment Stainless Steel Matt Chrome Scale DIN 862 - Metav IndustryLine
Benefit from a robust, hardened stainless steel construction, precise fine adjustment and vernier accuracy across a 0–300 mm range for reliable workshop measurements; order the instrument directly via Metav Werkzeuge or consult the Metav team for tailored advice. M201.321.2 Workshop Caliper — analogue vernier, 300 mm, fine adjustment (Metav IndustryLine) M201.321.2 is a workshop caliper designed for general machining and maintenance tasks, offering metric and imperial vernier readings and a robust monoblock construction for repeatable measurements up to 300 mm. Hardened stainless steel construction Fine-adjustment screw for controlled travel Vernier resolution 0.05 mm and 1/128" Monoblock frame for long-term stability Dependable precision for everyday workshop work The instrument provides reliable metrology where repeatability matters. Its hardened stainless steel body and matt‑chromed scale resist wear, so scale legibility and dimensional integrity are preserved in daily use. The caliper’s vernier arrangement gives a metric resolution of 0.05 mm (bottom scale) alongside an imperial 1/128" indication (top scale), which simplifies cross‑referencing between systems and reduces conversion errors during production. This combination of materials and scale design supports efficient quality control and lowers the risk of rework in routine machining and assembly. Robust design that reduces measurement uncertainty A monoblock construction minimises flex and improves stiffness along the length of the slide, while the integrated fine adjustment screw allows slow, controlled closing of the jaws for reproducible seating on the workpiece. The instrument’s jaw length of 100 mm gives a practical contact area for standard components, balancing reach and rigidity—attributes that maintain consistent results across repeated cycles. The analogue vernier layout avoids electronic dependency, making the caliper exceptionally suitable for workshop environments where robustness and low maintenance are priorities. Clear reading and standards-based manufacture Graduated according to accepted norms, the caliper complies with DIN 862 for the specified jaw dimensions, ensuring compatibility with established inspection practices. The vernier principle is straightforward to apply: align the zero for coarse reading and read the vernier for fine increments to obtain the measurement with 0.05 mm precision; the imperial vernier provides an additional quick-check in inches. For technicians familiar with mechanical measuring tools, the analogue format delivers a direct, tactile measuring experience that is both predictable and serviceable. Contact Metav Werkzeuge for further specification details or ordering support — Metav’s Emmerich location ensures consistent supply and pragmatic advice for workshop measurement needs: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M201.321.2 GTIN: 4054469101446 ECLASS: 21170344 Facts Measuring range: 0–300 mm Jaw length: 100 mm Resolution/vernier: 1/20 mm (0.05 mm) bottom; 1/128" top Norm: DIN 862 (for applicable jaw lengths) Analogue instrument, vernier type Special features Material: hardened stainless steel with matt‑chromed scale Fine‑adjustment screw Monoblock frame for improved stiffness Designed for outside, inside and step measurements FAQ How precise is the reading on this workshop caliper? The caliper delivers a metric vernier resolution of 0.05 mm (1/20 mm) and an imperial vernier of 1/128", providing workshop‑grade precision suitable for standard machine‑shop quality checks. Is the caliper suitable for daily shop use and harsher environments? Yes; the hardened stainless steel construction and matt‑chromed scale enhance durability and legibility, making the instrument well suited to regular workshop conditions. Does the instrument follow a recognised norm? The design follows DIN 862 requirements for the applicable jaw lengths, ensuring that dimensional references and inspection practices remain compatible with industry standards. What is the benefit of the fine‑adjustment screw? The fine adjustment allows controlled jaw travel for reproducible contact and reduced operator‑induced variation, improving measurement consistency on delicate or small contact surfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Pocket Caliper 0.05mm Parallax-Free, Three-Point Readings, Locking Screw, Monoblock, DIN 862, Plastic Case - Metav IndustryLine
Compact pocket form, parallax‑free scale and a secure locking screw combine to deliver reliable, repeatable readings for everyday workshop use; the matt‑chrome, stainless‑steel body ensures long service life and stable measuring. Order the caliper directly via Metav Werkzeuge or contact our consultants for tailored advice. Pocket caliper M201.107 – 0–300 mm, 0.05 mm resolution (Metav IndustryLine) The Pocket caliper M201.107 is a compact, parallax‑free analogue caliper for workshop and maintenance applications, designed for precise outside, inside, depth and step measurements up to 300 mm. Parallax‑free scale for reliable readings Locking screw and monoblock stability Stainless steel construction, matt chrome finish Four‑way measurement: inside/outside/depth/step Precision that speeds up inspection and reduces rework The compact design provides a dependable measuring solution with a 0–300 mm range and 0.05 mm reading increments, conforming to DIN 862 standards for mechanical calipers. The parallax‑free scale improves reading accuracy under workshop lighting and at different viewing angles, while the locking screw secures the slider for consistent repeat measurements. These characteristics reduce inspection time and the risk of rework by making initial readings more trustworthy; the short, stiff jaws typical of pocket formats maintain stability when measuring small parts or confined features. Robust build and handling for daily use Constructed from stainless steel with a matt‑chrome finish and a monoblock slider, the instrument resists corrosion and holds alignment during regular handling. The compact footprint and low weight make benchwork and mobile inspection straightforward, while the integrated depth gauge expands usability to bores and recesses. A thread chart printed on the reverse side supports quick reference for common fastener checks. Delivered in a protective case for transport and storage, the caliper remains ready for service when moved between workstations. Practical measuring features explained Four‑way measurement capability covers outside, inside, depth and step readings without accessory changes, streamlining everyday checks. The analogue nonius offers a tactile feel and immediate visual confirmation, suited to conventional workshop workflows where electronic integration is not required. Compliance with DIN 862 signals industrial suitability: readings at the stated 0.05 mm resolution meet typical machining and maintenance tolerances, making this caliper a pragmatic choice for metalworking and general engineering tasks. Contact Metav Werkzeuge for supply and application advice on the M201.107 pocket caliper or to arrange a technical consultation tailored to workshop needs. Technical data Article number: M201.107 GTIN: 4054469100548 Category: calipers Standard: DIN 862 Facts Measuring range: 0–300 mm Reading: 0.05 mm Type: analogue (nonius) Customs tariff number: 90173000 Special features Parallax‑free reading Locking screw (Feststellschraube) Monoblock slider Material: stainless steel (inox) Matt‑chrome finish Depth gauge included Thread chart on reverse side Delivered in a protective case Four‑way measurement: inside/outside/depth/step FAQ What measuring tasks is this caliper best suited for? The pocket caliper M201.107 is ideal for routine workshop checks, small‑part inspection and maintenance tasks where a 0–300 mm range and 0.05 mm resolution are appropriate. Does the instrument support inside and depth measurements? Yes. The design includes four‑way measurement functionality for inside, outside, depth and step readings, so the M201.107 covers these measurement types without additional attachments. Is the caliper corrosion resistant for use in mixed environments? The body is made from stainless steel with a matt‑chrome finish, providing good resistance to workshop humidity and light contamination. Does the caliper meet recognised standards for mechanical measuring tools? The instrument is produced to DIN 862 for mechanical calipers, offering the familiar accuracy class expected in industrial and maintenance environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Scriber Caliper T-Style 160mm Stop, Hardened Matt Chrome, Analogue 0.05mm Resolution, in Case - Metav IndustryLine
Combining hardened special steel, a 300 mm measuring range and a precise fine adjustment, this instrument delivers reliable layout and scribing performance for everyday workshop use. Order the precision scribing caliper directly via Metav Werkzeuge or ask the consultants for application advice. Precision Scribing Caliper, 300 mm T‑Frame (Metav IndustryLine) Precision Scribing Caliper, 300 mm T‑Frame, designed for accurate layout and marking in metalworking and toolroom environments Hardened matt-chrome special steel construction 300 mm measuring range, T‑frame with 160 mm stop 0.05 mm vernier for precise analogue reading Fine adjustment screw for repeatable scribing Robust reach and workshop-ready precision The caliper is built from hardened special steel with a matt chrome‑plated finish that resists wear and reduces glare during marking operations. With a 300 mm measuring range it falls into the workshop standard category, offering the best balance of reach and stiffness for routine machine‑shop and metal‑fabrication tasks. The analogue 0.05 mm vernier provides a straightforward reading method in line with common mechanical caliper practice, giving a dependable level of precision for layout work and quality checks. Controlled adjustments for repeatable marking A dedicated fine adjustment screw and T‑frame geometry ensure that scribed marks remain consistent across repeated operations. The integrated 160 mm stop permits controlled positioning when working on longer components or repeat features, reducing setup time and measurement error. These mechanical aids make the instrument especially useful where precise, repeatable layout lines are required before machining or assembly. Durable finish and protected delivery for the workshop The matt‑chrome surface both protects the scale from corrosion and reduces reflection under bright workshop lighting. Delivery includes a protective case for transport, which keeps the instrument secure between jobs and simplifies storage. As an analogue instrument with a vernier, the tool is robust, requires no batteries and is straightforward to maintain, supporting continuous use on the shop floor. Practical applications and user advantages This T‑frame layout instrument suits scribing, marking-out and general workshop measurement tasks across toolrooms, small series production and fixture building. The combination of mechanical stiffness, ergonomic T‑frame support and the fine adjustment mechanism helps operators achieve clear, repeatable layout lines with minimal rework. The caliper is a practical choice where mechanical reliability and simple, verifiable readings are prioritised. For reliable layout work choose the Metav IndustryLine precision scribing caliper and contact Metav Werkzeuge for tailored advice and supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M201.142 GTIN: 4054469100739 eClass: 21170344 Facts Measuring range: 0–300 mm Vernier resolution: 0.05 mm Bridge / stop: 160 mm Analogue instrument (vernier) Special features Material: hardened special steel, matt chrome‑plated T‑frame design for stable marking Fine adjustment screw for repeatability Protective case for transport FAQ How precise is the reading on this caliper? The instrument uses an analogue vernier with a resolution of 0.05 mm, suitable for standard workshop layout and marking tasks. Is the caliper delivered ready for use and protected in transit? Yes, the caliper is supplied in a protective case for transport to keep it secure between jobs. What applications suit this T‑frame layout instrument? It is intended for shop‑floor marking, toolroom layout, fixture work and general metalworking where repeatable scribing is required. Does the instrument require batteries or electronic maintenance? No; as an analogue vernier device, it operates mechanically and does not need batteries, simplifying upkeep. Which material is the caliper made from and how does that benefit workshop use? The body is made from hardened special steel with a matt chrome‑plated finish, offering wear resistance and reduced reflection for better visibility during marking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Rod Caliper With Carbide Tips, Fine Adjustment, Stainless Steel Matt Chrome Nonius - Metav IndustryLine
Benefit from a workshop-ready measuring instrument that combines a stainless steel construction, a precise vernier readout and wear-resistant carbide tips for dependable layout and inspection work; order directly via Metav Werkzeuge or consult the specialists for integration into existing measurement routines. Rod-style vernier caliper 300 mm with carbide tips — analogue measuring instrument by Metav IndustryLine A rod-style vernier caliper 300 mm with carbide tips designed for workshop layout, marking and dimensional checks, offering robust construction and fine mechanical control for routine metrology tasks 300 mm measurement range with vernier accuracy Replaceable tungsten carbide contact tips Stainless-steel body with matt chrome finish Fine-adjustment screw for controlled measuring Precise analogue measurement for everyday workshop control The instrument employs an analogue vernier system with a readable step of 0.05 mm, delivering a practical accuracy level for standard machine‑shop inspections and layout tasks. The vernier principle provides a direct, mechanical readout that remains reliable without batteries; this makes the caliper a low‑maintenance choice for repeated use on the shop floor. The 0–300 mm span places it in the Standard class, which is recognised for the best balance of reach, stiffness and one‑hand operability in machining and general metalworking. Durable contact points and stable, corrosion‑resistant body Constructed from stainless steel with a matt chrome‑plated scale, the instrument resists corrosion and surface wear that can affect repeatability. The hardened carbide tips provide a wear‑resistant measuring point that holds up under frequent contact with metal components, prolonging life and reducing the need for frequent replacement. A built‑in fine‑adjustment screw allows controlled jaw travel, improving repeatability when setting the jaws against edges or features and reducing operator‑induced variance during critical layout work. Practical handling, balance and workshop integration At 300 mm measuring length the caliper offers the universal workshop reach for components, fixtures and assemblies without sacrificing stiffness; this is especially useful for toolroom and maintenance applications where both reach and reliable readings matter. The instrument’s mass and profile deliver tactile stability when taking measurements, while the vernier division is matt chrome‑finished to reduce reflections and aid visibility under workshop lighting. The mechanical design favours long service life and straightforward in‑house handling. Ready for routine use and traceable procurement As a Metav IndustryLine instrument, the caliper is engineered for consistent performance in industrial environments and for straightforward procurement into central workshop stocks. The combination of a robust measuring beam, clear mechanical scale and wear‑resistant contact points supports dependable measurement results in everyday quality control. Integration into workshop tool inventories is uncomplicated, and the model is identified for ordering and stockkeeping by its SKU. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine rod‑style vernier caliper and to arrange direct delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M201.173 GTIN: 4054469100869 Measuring range: 0–300 mm Weight: 1.95 kg Analogue vernier display (nonius): 0.05 mm readable step Facts Standard workshop class (100–300 mm) Resolution / readable step: 0.05 mm Zolltarifnummer: 90173000 Special features Carbide contact tips Fine‑adjustment screw Stainless‑steel body Matt chrome‑plated scale Analogue vernier principle FAQ How accurate is the reading on this caliper? The caliper provides an analogue vernier readout with a readable step of 0.05 mm, suitable for standard workshop inspection and layout work with reproducible results. Is the caliper robust enough for daily shop use? Yes; the stainless‑steel construction and matt chrome scale reduce wear and corrosion, while the carbide contact tips increase resistance to abrasion in frequent measuring tasks. What benefit does the fine‑adjustment screw bring? The fine‑adjustment screw enables controlled jaw movement for precise contact and repeatable positioning, improving consistency when taking series of measurements. Which workshop tasks is this model intended for? Designed for general machine‑shop and metalworking applications, the 300 mm range covers common components, fixtures and assemblies where a balance of reach and stiffness is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Werkstatt-Messschieber mit Spitzen, 0,02mm, Feineinstellung, Werksnorm - Metav IndustryLine
Die außerordentlichen Bewertungen von Metav Werkzeuge stehen für über 42.000 glückliche Kunden. Probiere es aus und shoppe auf metav-shop.de.! HIGHLIGHTS für Metav IndustryLine Werkstatt-Messschieber mit Spitzen Messbereich: bis 300mm Ablesung: 0,02mm Material: Spezialstahl, Skala und Nonius mattverchromt : 0 bis 300mm - Reichweite, die passt Mit bis 300mm steht ein ausgewogener Rahmen für häufige Prüfaufgaben bereit. Werkstücke unterschiedlicher Länge bleiben innerhalb eines komfortablen Fensters. Im Maschinen- und Metallbau führt der Bereich zu klaren Ergebnissen bei minimalem Aufwand. Die Abläufe wirken aufgeräumt und wiederholgenau. Das stärkt Qualität und Tempo gleichermaßen. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber.. Werksnorm Unser Werkstatt-Messschieber wird vollständig nach den einschlägigen DIN-Normen gefertigt – sämtliche Materialien, Fertigungs- und Kalibrierverfahren entsprechen den Anforderungen der Werksnorm. Damit sind Maßhaltigkeit und Wiederholgenauigkeit garantiert, Prüfzertifikate sind international kompatibel, und Audits oder Kundenfreigaben lassen sich deutlich schneller durchlaufen. Die DIN-Konformität sichert konstante Qualität, erleichtert die weltweite Einsetzbarkeit und stärkt das Vertrauen in jedes einzelne Messergebnis. Die Premium Messwerkzeuge von Metav IndustryLine werden von unseren Experten für Messwerkzeuge empfohlen. Metav IndustryLine steht für Premium Messwerkzeuge zu einem annehmbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Produktdetails: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber Bestellnummer: M201.022 Zahlen & Fakten: Messbereich: 0-300mm Gewicht: 0,7kg Norm: Werksnorm Schnabellänge: 60mm Ablesung: 0,02mm Ausführungen Ausführung: analog Material: Spezialstahl, Skala und Nonius mattverchromt Lieferung im Kasten mit Feineinstellung mit Spitzen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Erwägungen beim Beschaffen eines Messschiebers: Neben der Präzision und dem Betriebsbereich sind erweiterte Eigenschaften wie die Funktionalität zum Datenoutput oder die Messkraftverwaltung von großer Signifikanz. Im Umfeld der Qualitätssicherung und in Laboreinrichtungen ist ein Messschieber mit kontrollierter Anwendungskraft besonders hilfreich. Des Weiteren ist die Überlegung entscheidend, ob eine Kalibrierung gewünscht ist. Eine Kalibrierung kann direkt nach Lieferung vorgenommen werden und sollte zur Sicherung der Prozessqualität jedes Jahr erneuert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Messwerkzeug von Metav IndustryLine haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
300mm Werkstatt-Messschieber mit Spitzen, 0,05mm, Feineinstellung, Werksnorm - Metav IndustryLine
Die exzellenten Bewertungen von Metav Werkzeuge stehen für mehr als 42.000 begeisterte Kunden. Überzeuge Dich selbst und bestelle bei metav-shop.de! Das wichtigste mit Spitzen Messbereich: bis 300mm Ablesung: 0,05mm Material: Spezialstahl, Skala und Nonius mattverchromt : –300mm - Reichweite, die passt Mit bis 300mm steht ein ausgewogener Rahmen für häufige Prüfaufgaben bereit. Werkstücke unterschiedlicher Länge bleiben innerhalb eines komfortablen Fensters. Im Maschinen- und Metallbau führt der Bereich zu klaren Ergebnissen bei minimalem Aufwand. Die Abläufe wirken aufgeräumt und wiederholgenau. Das stärkt Qualität und Tempo gleichermaßen. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber.. Werksnorm Alle Komponenten unseres Werkstatt-Messschieber werden konsequent gemäß Werksnorm gefertigt. Die Norm definiert präzise Vorgaben für Werkstoffe, Toleranzen, Fertigungsabläufe und Kalibrierprotokolle. Durch die strikte Einhaltung dieser Spezifikationen sichern wir Maßhaltigkeit, Reproduzierbarkeit und die weltweite Anerkennung der Prüfzertifikate – entscheidende Faktoren für Audit- und Freigabeprozesse. Die Premium Messwerkzeuge von Metav IndustryLine werden von unseren Experten für Messwerkzeuge empfohlen. Metav IndustryLine steht für hervorragende Messwerkzeuge zu einem annehmbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Feineinstellung Die Feineinstellung (auch Feinverstellung) ist eine kleine Rändel- oder Daumenschraube, über die der bewegliche Schieber eines Messschiebers mit sehr feinen, kontrollierten Schritten verfahren wird. Damit kann man die Backen genau und ohne Spiel anlegen, die Messkraft stabil halten und den Messwert einstellen, ohne dass man versehentlich darüber hinaus misst. Dies führt zu höherer Genauigkeit, besserer Wiederholbarkeit der Messergebnisse und erhöhter Benutzerfreundlichkeit, vor allem bei großen oder besonders hochwertigen Werkstatt-Messschiebern. Unsicher, ob das Werkzeug das Richtige ist? Oder fehlen technische Daten? Sprechen Sie uns einfach an! 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Produktmerkmale: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber Bestellnummer: M201.021 Zahlen / Daten: Messbereich: 0 bis 300mm Gewicht: 0,7kg Norm: Werksnorm Schnabellänge: 60mm Ablesung: 0,05mm Besonderheiten Ausführung: analog Material: Spezialstahl, Skala und Nonius mattverchromt Lieferung im Kasten mit Feineinstellung mit Spitzen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Zu beachtende Faktoren beim Erwerb eines Messschiebers: Die zusätzliche Ausstattung, darunter Datenausgänge und Messkraftkontrollen, erlangt neben der Genauigkeit und dem Messbereich erhebliche Bedeutung. Das Arbeiten mit einem Messschieber, der eine exakt eingestellte Messkraft aufweist, ist in der Qualitätssicherung und bei Labortätigkeiten von großem Nutzen. Man sollte auch berücksichtigen, ob der ausgewählte Messschieber kalibriert werden muss. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Messwerkzeug haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
300mm Werkstatt-Messschieber mit Spitzen, 0,05mm, Feineinstellung, Werksnorm - Metav IndustryLine
Der von Ludwig Josef Bayer 1989 gegründete Traditionsvertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem kleinem Preis. HIGHLIGHTS mit Spitzen Messbereich: bis 300mm Ablesung: 0,05mm Material: Spezialstahl, Skala und Nonius mattverchromt Routinen stärken mit Mit von 0 – 300mm decken den Bedarf im Tagesgeschäft zuverlässig ab. Flächen, Kanten und Abschnitte lassen sich sicher ansteuern, auch bei wechselnden Geometrien. Der Bereich unterstützt strukturierte Abläufe im Maschinen- und Metallbau und hält Reserven für Sonderfälle bereit. Gleichmäßige Messfolgen bringen Ruhe in die Fertigung. So bleibt Präzision planbar – vom ersten Griff bis zur Freigabe. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber.. Werksnorm Gefertigt nach Werksnorm: Unser Messwerkzeug erfüllt alle Normvorgaben für Material, Fertigung und Kalibrierung. So sind Präzision, Wiederholgenauigkeit und internationale Zertifizierung jederzeit gewährleistet – für reibungslose Audits und uneingeschränktes Vertrauen. Die Messwerkzeuge von Metav IndustryLine werden von unseren Profis für Messwerkzeuge empfohlen. Metav IndustryLine steht für Premium Messwerkzeuge zu einem unschlagbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Sie wissen nicht genau, ob dieses Werkzeug zu Ihrer Anwendung passt? Oder Ihnen fehlen noch wichtige technische Details? Kein Problem! Kontaktieren Sie uns – wir beraten Sie gerne. ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Produkteigenschaften für den Werkstatt-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber Bestellnummer: M201.031 Fakten zum Werkzeug: Messbereich: 0-300mm Gewicht: 0,7kg Norm: Werksnorm Schnabellänge: 90mm Ablesung: 0,05mm Besonderheiten Ausführung: analog Material: Spezialstahl, Skala und Nonius mattverchromt Lieferung im Kasten mit Feineinstellung mit Spitzen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf man achten sollte, wenn man einen Messschieber kaufen möchte: Während Präzision und Messbereich wesentliche Aspekte sind, darf die Berücksichtigung von Funktionen wie Datentransfer und Messkraftkontrolle nicht unterschätzt werden. Messschieber mit spezifizierter Messkraft bietet insbesondere bei Qualitätssicherungsprozessen und in laboratory setups Vorteile. Des Weiteren ist die Überlegung entscheidend, ob eine Kalibrierung gewünscht ist. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Werkstatt-Messschieber von Metav IndustryLine haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
300mm Werkstatt-Messschieber, 0,05mm, Werksnorm - Metav IndustryLine
Die hervorragenden Bewertungen von Metav Werkzeuge stehen für über 42.000 hochzufriedene Kunden. Überzeuge Dich selbst und bestelle bei metav-shop.de! Verlässlich im Alltag 300mm schaffen genau die Reichweite, die im Alltag am häufigsten gebraucht wird. Von der Vormontage bis zur Endprüfung bleibt der Zugriff auf relevante Maße erhalten. Der Bereich passt zu den Anforderungen im Maschinen- und Metallbau und sorgt für gleichmäßige Qualität. Messfolgen bleiben übersichtlich und planbar. Das reduziert Stillstände und hält Projekte auf Kurs. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Verlässliche Präzision durch Fertigung nach weltweit gültigen Standards Unser Messwerkzeug basiert vollständig auf den Richtlinien der Werksnorm. Dies betrifft sämtliche Produktionsschritte und Kalibrierverfahren ebenso wie die eingesetzten Materialien. Die so gewährleistete Maßhaltigkeit und Wiederholgenauigkeit sorgt für einheitliche Qualitätsstandards und internationale Vergleichbarkeit – ein entscheidender Vorteil bei Audits und Kundenfreigaben. Expertenrat: Wie pflegt und lagert man einen analogen Messschieber? Nach Gebrauch leicht ölen (säure- und harzfreies Feinöl) und in der Kassette staub- sowie korrosionsgeschützt aufbewahren. Bei „hakendem“ Lauf hilft ein Tropfen Öl auf Führungsschiene und Schieber. Sie sind unsicher, ob das Werkzeug für Ihre Anwendung geeignet ist? Oder benötigen Sie weitere technische Informationen? Kein Problem – sprechen Sie uns gerne an! 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Spezifikationen zumWerkstatt-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber leichte Ausführung Bestellnummer: M201.375 Fakten zum Werkzeug: Messbereich: 0 bis 300mm Gewicht: 0,8kg Norm: Werksnorm Schnabellänge: 100/36mm Ablesung: 0,05mm Ablesung in Inch/Zoll: 1/128 Besonderheiten Ausführung: analog Material: rostfreier Stahl, Skala und Nonius mattverchromt leichte Ausführung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Wichtige Aspekte beim Erwerb eines Messschiebers: Neben Genauigkeit und Messbereich spielen Zusatzfunktionen wie Datenausgang oder Messkraftkontrolle eine wichtige Rolle. Der Einsatz eines Messschiebers mit kontrollierter Messkraft ist besonders in der Qualitätssicherung und in Laborumgebungen vorteilhaft. Des Weiteren ist die Überlegung entscheidend, ob eine Kalibrierung gewünscht ist. Bereits bei der Zustellung ist eine Kalibrierung möglich, und für die Garantie der Prozesssicherheit sollte diese jährlich wiederholt werden. Pflegehinweis - damit Sie lange etwas von Ihrem Messwerkzeug haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
Hier wird noch anderes html hinkommen um das wir uns später kümmern