Mikroskopie für Profis, Fortgeschrittene und Einsteiger

Efficient specimen heating combined with precise X/Y positioning provides reproducible sample conditions; PID regulation and an LED temperature display ensure stable control up to 50 °C — order the AE.5168-NZ heating stage via Metav Werkzeuge or consult the advisors for application-specific guidance. AE.5168-NZ Heated X/Y Stage (PID control, 50 °C) by Euromex AE.5168-NZ is a compact heating stage add-on for NexiusZoom microscope tables, integrating temperature control with precision X/Y mechanics for controlled sample preparation and analysis X/Y heating stage for NexiusZoom series PID control for stable temperature regulation LED display with 0.1 °C actual-value resolution Available only with a new microscope purchase Stable temperature control for reproducible results The stage provides PID control to minimise overshoot and maintain a steady set temperature, supporting consistent experimental conditions. The unit limits heating to 50 °C, suitable for many biological samples and temperature-sensitive adhesives. An LED temperature indicator presents the actual value with 0.1 °C resolution, while the setpoint is adjusted in 1 °C increments for straightforward operation. These features reduce variability between measurements and help preserve sample integrity during extended observation. Precision positioning that matches microscope workflow An integrated X/Y stage enables fine specimen alignment without additional handling, improving repeatability when imaging or measuring small structures. Designed for the NexiusZoom series, the module is compatible with stands marked as P and S, and it is delivered as an add-on for new microscope purchases. The mechanical slide system retains the optical axis position while allowing smooth translational movement, simplifying focussing and area scouting. This combination of thermal and positional control supports both inspection tasks and routine laboratory workflows. Practical benefits for laboratory and industrial use The heated stage reduces condensation on samples and stabilises conditions for live specimens or adhesives during observation, lowering the risk of artefacts. Built to fit into existing NexiusZoom configurations, the module streamlines setup time and reduces handling steps, which is advantageous in high-throughput or educational environments. The design emphasises safe integration into microscope systems: PID regulation limits temperature excursions, while the LED status display provides at-a-glance confirmation of operating state and actual temperature. Contact Metav Werkzeuge for tailored integration advice and to include the AE.5168-NZ heated stage with a NexiusZoom microscope; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: AE.5168-NZ Type: Heating stage, add-on Compatible series: NexiusZoom Compatible stands: P; S Availability: Only with new microscope purchase Facts Maximum temperature: 50 °C Actual-value display step: 0.1 °C Setpoint display step: 1 °C Special features X/Y mechanism PID temperature control LED temperature display FAQ Is the heating stage compatible with all NexiusZoom microscopes? The AE.5168-NZ is designed for the NexiusZoom series and fits models specified for P and S stands; compatibility is indicated for the NexiusZoom line. How precise is the temperature readout on the stage? The actual temperature is shown with a resolution of 0.1 °C, while the setpoint is adjustable in 1 °C increments for stable control. Can the stage reach temperatures above 50 °C? The maximum temperature of the module is 50 °C, which is suitable for many specimen applications requiring gentle warming. Does the heating stage include active temperature regulation? Yes, the stage uses PID regulation to maintain a steady temperature and minimise thermal overshoot. Is the AE.5168-NZ sold separately from microscopes? The heating stage is supplied only in conjunction with a new microscope purchase and is not available as a standalone item. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of high-magnification optics, integrated LED illumination and an aplanatic lens design for reliable visual inspection in production and quality control. Order the device via Metav Werkzeuge or consult the technical team for application-specific advice. Handleuchtlupe Tech-Line CLASSIC Vergr.15x LED Linsen-D.16,3mm SCHWEIZER — handheld illuminated loupe, aplanatic 15× optics Handleuchtlupe Tech-Line CLASSIC Vergr.15x LED Linsen-D.16,3mm SCHWEIZER is a compact handheld illuminated loupe designed for detailed inspection tasks in industrial and craft environments 15× magnification, 16.3 mm lens Integrated LED illumination Aplanatic lens for reduced distortion Compact handheld design for bench use Improved measurement certainty with low-distortion optics The loupe combines a high 15× magnification with an aplanatic lens to reduce spherical aberration and maintain a true image across the small field of view. This optical configuration supports precise visual evaluation of fine features, edges and surface defects, making it suitable for tasks where dimensional clarity matters. The 16.3 mm lens diameter balances a concentrated view with comfortable eye relief, enabling accurate inspection without frequent repositioning of the workpiece. Reliable lighting that supports longer inspection cycles Built-in LED illumination supplies consistent, cool light to the inspection area, improving contrast and revealing fine details that diffuse ambient light can obscure. The stable light source helps to reduce eye strain during repetitive checks and contributes to faster decision-making on the production line. As an integrated feature, the illumination removes the need for external lamps, simplifying workstation setup and ensuring repeatable visual conditions for quality control. Ergonomic handling for workshop and laboratory workflows The compact, handheld form supports quick spot checks and close-up examination on the shop floor or at the inspection bench. Lightweight construction and a straightforward grip allow operators to inspect components comfortably during repeated use, enhancing throughput in small-batch processing and maintenance tasks. The Tech-Line CLASSIC is supplied as a single unit suitable for immediate deployment in measuring and inspection routines. Versatile applications and clear practical benefits This loupe is appropriate for electronics assembly checks, watch and jewellery inspection, small-part finishing and other precision trades where surface detail and micro-defect detection are critical. The combination of aplanatic optics and LED illumination offers a tangible advantage in reducing inspection time and raising detection rates, thereby supporting consistent product quality and fewer rework cycles. Contact Metav Werkzeuge for detailed technical guidance or to arrange procurement of the SCHWEIZER Tech-Line CLASSIC handheld illuminated loupe with 15× aplanatic optics Technical data SKU: 4000851780NW Type: Tech-Line CLASSIC Product: Handleuchtlupe Brand: SCHWEIZER Core specifications Magnification: 15× Lens diameter: 16.3 mm Form: aplanatisch Packaging unit: 1 UID: 4000851780NW Special features Integrated LED illumination Aplanatic lens design Handheld, compact construction FAQ What magnification does the loupe provide? The SCHWEIZER Handleuchtlupe Tech-Line CLASSIC delivers 15× magnification with a 16.3 mm aplanatic lens for low-distortion viewing. Is the illumination integrated or external? Integrated LED illumination is built into the Tech-Line CLASSIC, providing consistent lighting without additional lamps. Which applications suit this handheld loupe best? Typical uses include electronics inspection, watch and jewellery work, fine finishing and other precision trades where micro-detail visibility is required; the SCHWEIZER loupe is designed for these environments. What is the lens type and why does it matter? The aplanatic lens minimises spherical aberration, yielding a truer image and aiding precise visual evaluation during quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of 15× magnification, a compact 16.3 mm lens and a robust Tech-Line design for accurate, repeatable inspection of small components; order the watchmaker's loupe directly via Metav Werkzeuge or consult the Metav specialists for application advice. Tech-Line watchmaker's loupe "Schweizer" — 15×, Lens Ø 16.3 mm A Tech-Line watchmaker's loupe "Schweizer" is for close visual inspection and assembly tasks in precision workshops and jewellery benches. High-precision 15× magnification Compact 16.3 mm glass lens Optics for watchmaking and fine work Durable Tech-Line housing Clarity for micrometre-scale inspection The loupe delivers 15× magnification, enabling visible enlargement of very small details that remain hard to assess with the naked eye. This level of magnification suits inspection of hairline cracks, gear teeth, pivots and solder joints where visual certainty directly reduces rework and measurement steps. The 16.3 mm lens provides a focused viewing area while keeping the optic compact for close handling. By emphasising optical clarity and stable magnification, the tool supports a more efficient inspection routine and more reliable quality decisions. Compact design that supports efficient workflow A small-diameter lens and the Tech-Line form factor ensure the loupe is comfortable for prolonged use and easy to position above components. The compact construction facilitates rapid visual checks during assembly and servicing without the bulk of larger magnifiers. For workshop environments where bench space and mobility matter, the combination of compact optics and a sturdy housing helps maintain a steady workflow. Single-unit packaging makes stocking simple for small workshops and specialist suppliers. Practical uses and handling guidance The loupe is suitable for precision trades such as watchmaking, jewellery repair, microelectronics inspection and any fine assembly where optical magnification is required. Care of the optical surface with a soft lens cloth and avoidance of abrasive cleaners preserves the glass lens and keeps the view free from artefacts. For integration into quality-control routines, the loupe supports visual control steps that complement micrometre and caliper measurements, improving both inspection speed and confidence in small-part handling. Contact Metav Werkzeuge for purchase and specialist advice on the Tech-Line watchmaker's loupe "Schweizer" — available via Metav Werkzeuge GmbH, info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 4000851737NW Type: Tech-Line Product: Watchmaker's loupe Brand: SCHWEIZER Model designation: Uhrmacherlupe Tech-Line Vergr. 15x Linsen-D.16,3mm Schweizer Facts Magnification: 15× Lens diameter: 16.3 mm Packaging unit: 1 piece Special features Compact 16.3 mm glass lens Precision 15× optical magnification Tech-Line sturdy housing FAQ What magnification does the loupe provide? The Tech-Line watchmaker's loupe offers 15× magnification, suitable for detailed visual inspection of small components and fine workmanship. How does the 16.3 mm lens affect viewing? A 16.3 mm lens concentrates the viewing area into a compact, easy-to-handle optic that balances magnified detail with manoeuvrability for close work. Is this loupe suitable for watchmaking and jewellery? Yes, the loupe is designed for precision tasks such as watchmaking and jewellery repair where 15× magnification assists in inspecting pivots, teeth and minute surface conditions. How should the lens be cleaned and maintained? Use a soft, lint-free lens cloth and mild lens cleaner; avoid abrasive materials. Proper care will preserve the optical quality of the glass lens. What packaging is supplied? The product is supplied as a single unit (packaging unit: 1 piece) under SKU 4000851737NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of 15× magnification, integrated illumination and compact dimensions to speed up visual inspections and reduce rework; order directly via Metav Werkzeuge or contact our consultants for technical guidance. Peak Illuminated Magnifier MS905.119 — 15× magnification with illumination The Peak Illuminated Magnifier is a compact optical aid designed for close inspection tasks in workshops, laboratories and jewellery workbench applications. 15× magnification for fine-detail inspection Integrated illumination for even lighting Wide Ø25 field of view for easier scanning Compact 180×36×42 dimensions for workshop use Inspect finer detail with reliable 15× magnification The combination of 15× magnification and a clear, Ø25 field of view enables precise visual checks of small components and surface features. This level of enlargement makes hairline defects, solder joints and fine engravings easier to evaluate, which reduces the need for repeated handling and speeds up quality assurance. The optical performance is geared towards repetitive inspection tasks where clarity and repeatability matter. Consistent illumination to reveal hidden faults An integrated illumination source delivers even, shadow‑reducing light across the viewing area so that textures and contrasts become more visible. For delicate work on circuit boards, jewellery or printed markings, the lit lens reduces eye strain and improves accuracy. The lighting is powered by Type C batteries (2× Type C, not included), ensuring portability and the freedom to work away from fixed power supplies. Compact, practical design for workshop workflows With compact 180×36×42 dimensions, the tool is easy to position at a workbench or pass between technicians without obstructing other tasks. The housing and form factor prioritise manoeuvrability in confined spaces, making the device suitable for inspection rounds and bench work alike. Portability, combined with the illumination and high magnification, supports efficient inspection cycles and smoother production flows. Clear specifications for purchasing and inventory The instrument is categorised in optics and supplies practical benefits for routine quality checks. The construction focuses on optical clarity and user convenience rather than complex electronics, which simplifies maintenance and replacement planning. Technical features such as magnification, field size and battery type are presented plainly to support procurement and ensure the magnifier integrates seamlessly into existing inspection routines. Contact Metav Werkzeuge today to discuss the Peak illuminated magnifier MS905.119, confirm suitability for specific inspection tasks or arrange swift delivery from our Emmerich hub at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MS905.119 Brand: Peak Product name: Peak Illuminated Magnifier Facts Magnification: 15× Field of view: Ø25 Dimensions: 180×36×42 Battery: 2× Type C (not included) Special features Integrated illumination Category: Optics Compact design FAQ What level of magnification does the magnifier offer? The magnifier provides 15× magnification, suitable for detailed inspection of small components and fine craftsmanship. Is the lighting built in and what powers it? Yes, the device features integrated illumination powered by 2× Type C batteries (not included), allowing cordless use at the bench. Which inspection tasks is this magnifier best suited to? The instrument is ideal for tasks such as solder joint inspection, jewellery appraisal, stamp and print examination, and general small-part quality checks. How large is the visible area through the lens? The viewing area is specified as Ø25, offering a balance between magnified detail and a usable field for scanning small surfaces. Can the illuminator be used on portable inspection rounds? Yes, the integrated lighting and compact 180×36×42 dimensions make it convenient for mobile inspections and bench transfers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise 15× magnification combined with a lightweight aluminium housing and an anti-fog tube vent for reliable, uninterrupted inspection. Order the loupe directly via Metav Werkzeuge or contact our consultants for application advice. Peak Loupe A60D — 15× magnification, aluminium housing The Peak Loupe A60D is a compact inspection loupe designed for precise visual work on small components such as watches and jewellery. 15× magnification for fine inspection Lightweight aluminium housing Tubular vent prevents lens fogging Ideal for watches and jewellery inspection Sharper views for meticulous inspection The loupe provides 15× magnification, delivering a magnified, detailed view of fine structures without complicated optics. The single lens design keeps the optical path simple, which reduces visual distortion and makes measurement comparisons easier. For quality control and delicate assembly tasks, the enhanced visual clarity supports faster decisions and fewer rechecks, helping maintain production throughput while preserving accuracy in small-component inspection. Robust, portable design that endures workshop use Constructed from aluminium, the housing combines low weight with resistance to everyday wear in a workshop environment. The compact construction makes the loupe easy to carry between workstations and reduces hand fatigue during extended use. A small bore in the tube acts as an anti-fog vent, preventing condensation on the lens and ensuring a clear view even when ambient conditions change; as a result, interruptions due to lens fogging are minimised and inspection continuity is improved. Practical ergonomics that integrate into inspection workflows Designed for handheld inspection of small items, this loupe is especially suitable for precision tasks such as examining watch movements or assessing jewellery settings. The straightforward optical setup requires no calibration, so the device can be used immediately at bench stations or in combination with simple fixtures. By providing a reliable, repeatable view of fine details, the loupe reduces operator uncertainty and contributes to consistent quality checks across small-batch or repair operations. For precise inspection tasks and to discuss how the Peak Loupe A60D fits your workflow, contact Metav Werkzeuge for expert guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS905.300 Name: Peak Loupe A60D Type: A60D Manufacturer: Peak Category: Optik Facts Magnification: 15× Lens: 1x Special features Material: Aluminium Small tube bore prevents lens fogging Suited for watches and jewellery inspection FAQ What magnification does the loupe offer? The loupe provides 15× magnification, giving a detailed view suitable for inspection of very small features. Is the loupe suitable for watchmaking tasks? Yes, the design is well suited to watch inspection and repair; the Peak Loupe A60D is specifically recommended for watches and jewellery. How does the anti-fog function work? A small bore in the tube allows air exchange; this anti-fog vent prevents condensation from forming on the lens during changes in temperature or humidity. What material is the housing made from? The housing is made from aluminium, offering a balance of lightness and durability for daily workshop use. Does the loupe require calibration or special maintenance? No calibration is required; routine cleaning of the lens and keeping the tube vent clear are sufficient to maintain optimal performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Peak Thread Counter — Rectangular, 7x Peak Thread Counter is a compact inspection tool for Textile Quality Control, offering 7x magnification and an engraved mm scale for precise thread counting. Thread Counter with 7x magnification Engraved mm scale on both sides of base 15 x 15 mm field of view for precise counts Robust anodised aluminium, black finish Compact rectangular design for easy handling Exceptional accuracy for textile inspection The Peak Thread Counter delivers accurate counts and reliable measurements for fabric analysis. With 7x magnification and a clear 15 x 15 mm field of view, users can identify individual threads and calculate thread density quickly. The engraved mm scale on each side of the base corresponds to the width of the observed area, which simplifies direct measurements and reduces the need for secondary tools. This precision supports quality control routines and speeds up inspection workflows without sacrificing repeatability. Durable design that supports frequent use Constructed from aluminium with a black anodised finish, the Thread Counter combines lightweight handling with robust durability. The rectangular shape ensures a stable base and comfortable grip for repeated use in production or laboratory settings. The compact footprint means the instrument is easy to store and transport between workstations, while the metal construction resists wear from regular contact with fabrics and tools. This design reduces downtime and maintenance, benefiting busy quality teams and technical users. How it works and why it’s easy to use A simple optical arrangement with a single lens provides an enlarged view of the textile surface, making individual filaments visible without complex setup. The mm scale is engraved on both sides of the foot, and its length equals the width of the field of view, allowing direct read-off of distances and counts. For users unfamiliar with optical magnification: 7x magnification makes details appear seven times larger than unaided vision, improving accuracy when counting threads per millimetre. No calibration is required for everyday inspections. Who benefits most from this instrument Textile Technicians, Quality Inspectors and Hobbyists engaged in fabric work will find the Thread Counter especially useful for assessing weave, verifying fabric specifications and documenting production samples. Its combination of portability, clear scale and robust materials makes it suitable for both laboratory benches and on-site checks in manufacturing. The straightforward operation and visible scale also make it a helpful teaching aid for training staff in inspection procedures. We recommend the Peak Thread Counter for reliable, fast textile inspection — for expert advice contact Metav Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Bezeichnung: Thread Counter (Fadenzähler), rectangular, 7x Marke: Peak SKU: MS905.378 Magnification: 7x Lens: x1 Field of view: 15 x 15 mm Material: Aluminium (black) Special feature: Engraved mm scale on each side of the base Additional information: A mm scale is engraved on each side of the foot; the scale length corresponds to the width of the field of view UID: MS905.378 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What magnification does the Peak Thread Counter provide? The Peak Thread Counter offers 7x magnification, allowing clear visualisation of individual threads within the 15 x 15 mm field of view for precise counting. Is the Thread Counter by Peak suitable for industrial quality control? Yes, the Peak Thread Counter is designed for textile inspection and quality control; its engraved mm scale and robust aluminium construction make it appropriate for regular use in production environments. How do I read measurements with the engraved scale on the Peak Thread Counter? Read the engraved mm scale that is on each side of the base; the scale length equals the width of the field of view, so measurements can be taken directly without additional conversion. Can I use the Peak Thread Counter for hobby or educational purposes? The Peak Thread Counter is well suited for hobbyists and training settings due to its simple operation, compact design and visible mm scale that aids learning and demonstrations.

Information conflict: magnification is specified as "x2" and "8x" for SKU MS905.381 (Peak Fadenzähler), which may cause confusion for users or customers trying to determine the correct magnification level of the product, as the discrepancy between "x2" and "8x" could lead to misunderstandings about its actual capabilities, functionality, or intended use, potentially impacting purchasing decisions or user satisfaction, especially for those requiring precise magnification specifications for professional or technical applications, such as in fields like microscopy, inspection, or detailed craftsmanship, where accuracy in magnification is critical, and any inconsistency in product descriptions might undermine trust in the product's reliability or the manufacturer's attention to detail.

Benefit from the combination of 15× magnification, a 16 mm field number and direct compatibility with the NexiusZoom series for reliable, repeatable observations; order the eyepiece pair directly via Metav Werkzeuge or contact our consultants for application advice. Pair of HWF eyepieces — 15× magnification, 16 mm field number (Euromex) Pair of HWF eyepieces for NexiusZoom that delivers a wide apparent field and consistent imaging for laboratory and industrial microscopy applications. 15× magnification for fine detail 16 mm field number for wide view Compatible with NexiusZoom and ESD models Supplied as a matched eyepiece pair Improved optical resolution for precise inspection The 15× magnification together with a 16 mm field number provides a practical balance between enlargement and usable field of view, making it easier to spot fine details without constant repositioning. In optical terms, the field number expresses the diameter of the image circle at the eyepiece, so a larger field number equates to a broader field of view for comfortable scanning. These characteristics support quality assurance and measurement tasks where both overview and detail are required. Seamless integration with NexiusZoom systems Designed for the NexiusZoom line, the eyepieces ensure mechanical and optical compatibility with both standard and ESD-protected models, reducing setup time and alignment work. As a matched eyepiece pair, they deliver symmetrical imaging in binocular use, which helps to maintain measurement consistency and reduces eye strain during extended inspection periods. Compatibility with the NexiusZoom series simplifies procurement and spare-part planning in the workshop environment. Practical advantages for everyday laboratory work The eyepiece set is intended for routine use in laboratory and industrial contexts where repeatability and clear observation are priorities. The wide apparent field supports quicker visual searches, while the paired configuration aids stereoscopic balance. Accessories and related items within the NexiusZoom range are available for adaptation or replacement, allowing a modular approach to microscope configuration and reducing downtime when an upgrade or part change is needed. Contact Metav Werkzeuge for tailored advice on integrating these Euromex eyepieces into existing NexiusZoom equipment and to discuss delivery from our Emmerich warehouse. Technical data Article number: NZ.6015 Manufacturer: Euromex Product type: Eyepiece pair Eyepiece type: HWF Specifications Magnification: 15× Field number: 16 mm Eyepieces per set: 2 Compatible series: NexiusZoom; NexiusZoom ESD Features and compatibility Matched eyepiece pair Wide field optics Cross-selling SKUs: NZ.1902-A;NZ.1902-AP;NZ.1902-B;NZ.1902-B-ESD;NZ.1902-P;NZ.1902-P-ESD;NZ.1902-PG;NZ.1902-S;NZ.1902-S-ESD;NZ.1902-U;NZ.1902-U-ESD;NZ.1903-A;NZ.1903-AP;NZ.1903-B;NZ.1903-B-ESD;NZ.1903-M;NZ.1903-P;NZ.1903-P-ESD;NZ.1903-PG;NZ.1903-S;NZ.1903-S-ESD;NZ.1903-U;NZ.1903-U-ESD;NZ.5302;NZ.5303 FAQ What magnification and field of view do these eyepieces provide? The Pair of HWF eyepieces by Euromex (SKU NZ.6015) provides 15× magnification with a 16 mm field number, offering a balance of detail and a wide viewing area for inspection tasks. Are these eyepieces compatible with NexiusZoom and ESD models? Yes, the eyepiece set is specified for use with NexiusZoom and NexiusZoom ESD microscopes and is mechanically compatible with those series. Why is a matched eyepiece pair important for binocular use? A matched eyepiece pair ensures consistent optical performance between both oculars, which supports balanced binocular vision and improves repeatability during measurements and inspections. Can these eyepieces be used for both laboratory and industrial inspections? The design and specifications of the Euromex HWF eyepiece pair make them suitable for laboratory and industrial inspection where a wide field and clear detail are required. Are replacement or related optical accessories available for this eyepiece set? Yes, related accessories and compatible components are listed under the cross-selling SKUs and can be sourced to expand or maintain NexiusZoom setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of 20× magnification and a 16.8 mm lens diameter for reliable close-up inspection; the compact folding design protects the lens and keeps the device ready for quick checks. Order the magnifier directly via Metav Werkzeuge or contact our consultants for technical advice. Tech-Line folding pocket magnifier 20× (lens Ø 16.8 mm) — SCHWEIZER A Tech-Line folding pocket magnifier designed for targeted visual inspection and quality control in workshops, hobby applications and light laboratory work 20× high magnification 16.8 mm lens diameter Compact folding pocket design Precision loupe for inspection tasks See defects early with powerful, focused magnification The 20× magnification delivers a concentrated view of fine details that are otherwise hard to distinguish at a glance. With a 16.8 mm lens diameter, the optical system is optimised for pinpoint examination rather than wide-field observation, making it particularly useful when looking for micro-scratches, solder joints or print faults. The precision optics reduce the need for repeated handling and support faster decision-making in inspection routines. Protective folding design for everyday workshop use This folding loupe folds neatly into its cover to keep the optics protected when not in use, supporting long-term usability in busy environments. The folding pocket magnifier design minimises accidental contamination of the lens and simplifies transport between workstations. The compact format allows for immediate availability on-site and helps maintain inspection cadence without interrupting production flow. Practical portability that supports efficiency on the shop floor Small and lightweight, the loupe is intended for quick visual checks and fast acceptance tests where speed and reliability matter. Its compact nature enables quick checks at the bench, on assembly lines or during incoming goods inspection, reducing downtime and preventing avoidable rework. The form factor supports a one-handed workflow, so checks can be integrated into standard operating procedures with minimal disruption. Clear guidance for selection and routine use For applications that require visual magnification rather than measurement, this instrument offers a straightforward, low-complexity solution. The loupe is suitable for targeted inspection tasks; however, it is not a measuring instrument and should be used as a visual aid alongside calibrated tools where traceable measurement is required. If further technical details or suitability advice are needed, Metav Werkzeuge provides application support and can clarify whether this model fulfils specific inspection criteria. Contact Metav Werkzeuge for tailored advice on the Tech-Line folding pocket magnifier and to discuss delivery options from Emmerich to your workshop Technical Data Article number: 4000851699NW Series: Tech-Line Product type: Folding pocket magnifier Brand: SCHWEIZER Packaging unit: 1 Specifications Magnification: 20× Lens diameter: 16.8 mm Special features Folding pocket design Intended for visual inspection and close-up checks Compact, portable format FAQ What magnification does this loupe provide? The Tech-Line folding pocket magnifier provides 20× magnification, suitable for detailed visual inspections and fine-detail work. Is the loupe suitable for measuring small features? This folding pocket magnifier is intended as a visual inspection aid; it supports close-up examination but is not a calibrated measuring instrument. How is the lens protected during transport? The optical lens folds into its protective cover to reduce the risk of scratches and contamination while being carried or stored. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Ensure reliable optical performance and simple on-site upkeep with a compact, consumable-rich maintenance kit: the set combines essential cleaning supplies, precision adjustment tools and a protective tool case for neat storage. Order the PB.5276 set directly via Metav Werkzeuge or ask our consultants if additional advice is required. PB.5276 Euromex Microscope Maintenance Set — 16-piece with Tool Case A PB.5276 microscope maintenance set is designed for routine cleaning and fine adjustment of optical instruments in laboratories, schools and service workshops Complete 16-piece service kit for microscopes Includes lens cleaning fluid and 100 tissues Six-piece screwdriver set for fine adjustments Supplied in a durable tool case Keep optics performing reliably The PB.5276 kit combines consumables and soft tools to maintain optical clarity and reduce the risk of contamination-related image degradation. Included items such as lens cleaning fluid, a cleaning brush, an air blower and a 140 × 140 mm cleaning cloth allow safe removal of dust and light residues from objective lenses and oculars. Regular use of these consumables helps to prevent abrasive cleaning and extends intervals between professional servicing, supporting uninterrupted laboratory workflows. Precision tools for careful mechanical work Fine mechanical adjustments require appropriately sized tools; the set contains a six-piece screwdriver set, three hex keys (1.5 mm, 2 mm, 2.5 mm), a tube of maintenance grease and a 10 ml oil bottle for controlled lubrication. These items enable accurate tightening and minor alignments of stages, focus mechanisms and accessory mounts without resorting to improvised or oversized tools that can damage threads or finishes. The combination of small drivers and hex keys supports precise intervention and conserves the instrument’s mechanical integrity. Compact organisation that speeds maintenance routines All components are supplied in a robust tool case that keeps consumables and tools accessible and protected. A tidy kit reduces time spent searching for parts during scheduled checks and enables quick service rounds across multiple instruments. The case design supports both bench-top storage and transport to classroom or field environments, so routine maintenance can be integrated into daily schedules with minimal disruption and maximum peace of mind. Who benefits and how to integrate the kit The set is ideal for laboratories, educational institutions, field service teams and small repair shops that carry out regular optical maintenance. By supplying both consumables and adjustment tools in one package, the kit offers a cost-effective method to protect instrument performance and avoid avoidable repairs. If uncertainty exists about compatibility with a specific instrument model or for further technical details please contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — technical advisors can advise on integration and stocking options. Contact Metav Werkzeuge for stock availability and tailored maintenance advice for the PB.5276 microscope maintenance set. Technical Data Article number: PB.5276 Brand: Euromex Product type: Microscope maintenance set Packaging: Tool case Pieces per set: 16 Facts Lens cleaning fluid: 20 ml Cloth size: 140 × 140 mm Lens paper: 100 sheets Oil bottle: 10 ml Hex key sizes: 1.5 mm, 2 mm, 2.5 mm Special features Cleaning brush Six-piece screwdriver set Air blower (blasebalg) Tube of maintenance grease 100 sheets of lens cleaning paper 140 × 140 mm cleaning cloth Supplied in a protective tool case FAQ Which consumables are included in the PB.5276 set? The PB.5276 microscope maintenance set contains lens cleaning fluid (20 ml), a 140 × 140 mm cleaning cloth, 100 sheets of lens cleaning paper, a cleaning brush, an air blower, a tube of maintenance grease and a 10 ml oil bottle. Are the tools suitable for fine mechanical adjustments on microscopes? Yes. The set includes a six-piece screwdriver set and three hex keys (1.5 mm, 2 mm, 2.5 mm) intended for small screws and adjustments commonly found on microscopes and ancillary equipment. Can the included cleaning fluid be used on coated optics? The kit’s lens cleaning fluid is supplied for optical cleaning. For coated or delicate surfaces, follow the microscope manufacturer’s cleaning recommendations before applying any fluid from the PB.5276 set. Is the kit transportable for field service or classroom use? The components are organised in a durable tool case, making the PB.5276 set convenient to carry between workbenches, classrooms and customer sites while keeping consumables protected and accessible. Who is the kit aimed at? The set is aimed at laboratories, schools, field service technicians and small workshops that require reliable, routine maintenance of optical instruments to maintain image quality and prolong equipment life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine precise 10x magnification with an integrated illumination and a compact 25 mm viewing field for reliable inspection of small components; the slim dimensions ensure comfortable handling in routine quality checks. Order the Peak Leuchtlupe directly via Metav Werkzeuge or ask our consultants if needed. Peak Leuchtlupe 10x — Illuminated Handheld Loupe for Inspection A compact illuminated loupe, the Peak Leuchtlupe delivers 10x magnification and a 25 mm field of view for detailed visual inspection in electronics, watchmaking and quality control tasks. 10x magnification for fine inspection Illuminated lens for consistent lighting 25 mm viewing field for precise focus Runs on 2x Type-C batteries (not included) Inspect small details with clear, illuminated optics The combination of 10x magnification and an integrated light source improves visual contrast and reduces eye strain during repetitive checks. The illuminated lens provides an even beam across the viewing area, making fine solder joints, engravings and component markings easier to evaluate. For users unfamiliar with optical terms: magnification indicates how much larger an object appears through the lens, while the viewing field specifies how wide the observable area is — a 25 mm viewing field balances magnification and context so that both detail and part orientation remain visible. Compact format that supports practical workflow With slim external dimensions (175×35×41 mm), the loupe is designed for handheld use and rapid inspection routines without adding bulk to a workstation. The modest footprint allows it to be kept at a bench or carried in a toolbox, supporting mobile quality checks or assembly-line sampling. The lightweight profile ensures steady handling; combined with a steady light source, this reduces the need for frequent readjustments and helps maintain an efficient workflow during repetitive visual tasks. Power and maintenance explained simply Power is supplied by 2x Type-C batteries (not included), a common and easily sourced format that keeps downtime to a minimum. The battery compartment is straightforward to access and replace, which simplifies on-site renewal without specialist tools. Routine maintenance is limited to occasional lens cleaning with a soft, lint-free cloth and checking battery contacts; this conservative care routine contributes to reliable performance over time and low operational costs. Why this tool fits professional inspection tasks The loupe is a purpose-built optical aid for precision work in sectors such as electronics repair, jewellery inspection and fine mechanics. Its illuminated optics and defined viewing field make dimension checks and defect detection faster and more consistent than unaided visual inspection. For procurement and quality managers, the tool offers a practical balance of optical performance and portability, enabling standardised visual checks across multiple workstations. Contact Metav Werkzeuge for tailored advice on integrating the Peak Leuchtlupe into inspection routines or to request order support from our Emmerich team Technical data Article number: MS905.118 Brand: Peak Product name: Peak Leuchtlupe Dimensions: 175×35×41 mm Viewing field: Ø25 mm Magnification: 10x Batteries: 2x Type C (not included) Illumination: integrated light Category: Optik Notable feature: mit Beleuchtung Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/ff/10/d0/67/67d010ff2285a7cc9c2fed20/MS905118-main.jpg FAQ Is the loupe suitable for electronics inspection? The Peak Leuchtlupe is well suited for electronics inspection thanks to its 10x magnification and integrated illumination, which aid in examining solder joints and small components. What power source is required? Power is provided by 2x Type-C batteries; the Peak Leuchtlupe requires these cells and they are not included. How large is the viewing area through the lens? The viewing field measures Ø25 mm, offering a practical balance between magnified detail and the visible area for component orientation. How should the lens be cleaned? Clean the lens of the magnifier with a soft, lint-free cloth; avoid abrasive cleaners and never submerge the unit in liquids. Is the loupe suitable for watchmaking and jewellery checks? Yes, the combination of 10x magnification and consistent LED illumination makes the loupe suitable for fine inspection tasks in watchmaking and jewellery. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise mechanical positioning and a transparent glass plate for reliable sample observation; combine the compact 180 × 155 mm footprint with a 75 × 75 mm travel range for smooth workflow — order the NZ.9505 directly via Metav Werkzeuge or consult the advisers if required. Euromex Mechanical X/Y Stage NZ.9505 — 180 × 155 mm, 75 × 75 mm travel, transparent glass plate The NZ.9505 is a mechanical X/Y stage add-on for microscopes, designed for fine sample positioning on a compact 180 × 155 mm platform with a Ø95 mm mounting hole for attachment to the microscope table. Mechanical X/Y stage with 75 × 75 mm travel Transparent glass plate for clear sample view Ø95 mm mounting hole for microscope attachment Supplied for use with new microscope models only Precise positioning tailored to microscopy workflows The mechanical stage provides an accurate 75 × 75 mm traverse on a compact 180 × 155 mm area, enabling repeatable adjustments during inspection and preparation tasks. The combination of a geared X/Y mechanism and clearly defined travel limits minimises search time for features on specimens, which increases throughput in routine microscopy work. The transparent glass plate supports transmitted-light techniques, while the integrated Ø95 mm mounting hole ensures a secure interface with standard microscope tables. Seamless integration with modern microscope platforms Designed specifically to be supplied with newer microscope models, the stage fits directly to the microscope table via the Ø95 mm aperture, reducing installation time and alignment effort. The unit is delivered assembled as an X/Y assembly with a glass stage plate, simplifying procurement and allowing quick commissioning. Compatibility notes indicate fitment with stands marked P and S, so planning of instrument configuration is straightforward and limits downtimes associated with custom adapters. Stable handling and clearer sample observation The mechanical X/Y controls deliver smooth, controlled motion that supports delicate sample manipulation and repeatable positioning for imaging or measurement routines. The transparent glass plate ensures unobstructed transmitted illumination and a stable viewing surface for high‑contrast microscopy tasks. As a compact add-on, the stage contributes to a tidy workstation footprint while enabling precise lateral shifts without re‑clamping the specimen. Contact Metav Werkzeuge for compatibility advice and to arrange delivery from Emmerich — ask about the NZ.9505 mechanical X/Y stage and its fitment with current microscope models Technical data Article number: NZ.9505 Product type: Mechanical X/Y stage add-on Manufacturer: Euromex Label: Mechanical X/Y stage 180 × 155 mm with 75 × 75 mm travel and transparent glass plate. For Ø95 mm mounting hole. Supplied only with new microscope Facts Overall dimensions: 180 × 155 mm Travel X × Y: 75 × 75 mm Mounting hole diameter: Ø95 mm SKU/UID: NZ.9505 Special features Transparent glass plate Supplied with X/Y stage and glass plate Attachment to microscope table Compatible with stands P and S Intended for delivery with new microscope models only FAQ Is this stage compatible with older microscope models? The NZ.9505 mechanical X/Y stage from Euromex is supplied only with newer microscope models and is intended to be mounted via the Ø95 mm aperture on the microscope table. What are the exact travel and footprint dimensions? The stage offers a 75 × 75 mm X/Y travel range on a compact 180 × 155 mm platform as specified for the NZ.9505. What is included in the delivery for the NZ.9505? Delivery includes the mechanical X/Y stage complete with the transparent glass plate as stated in the product description. Can the transparent glass plate be used with transmitted‑light techniques? Yes — the transparent glass plate of the NZ.9505 permits transmitted illumination methods, supporting clearer observation of thin or translucent samples. What mounting interface does the stage use? The stage is designed for a Ø95 mm mounting hole with Ø95 mm for attachment to the microscope table, ensuring a direct and secure fit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of a 0.5× lens factor and a generous working distance of 183 mm to inspect larger assemblies without losing operator clearance; order the Euromex auxiliary lens directly via Metav Werkzeuge or consult our specialists for compatibility advice. Euromex 0.5× Auxiliary Lens NZ.8905 – 183 mm Working Distance for NexiusZoom The 0.5× auxiliary lens NZ.8905 is an add-on optical element for NexiusZoom stereo microscopes, designed to widen the field of view while keeping a practical working distance for inspection and assembly tasks. *0.5× lens factor for wider field of view *183 mm working distance for workspace clearance *Compatible with NexiusZoom series microscopes *Fits stands P, PG, A, AP, U, B, BC and M Inspect larger areas with fewer lens changes By integrating a 0.5× lens factor, the auxiliary lens reduces the effective system magnification to provide a noticeably broader field of view, enabling faster visual overview of components and assemblies. The maintained working distance of 183 mm gives sufficient clearance for probes, tools and handling during inspection or rework. For process engineers and quality technicians this means fewer objective swaps, shorter cycle times and a more efficient visual inspection workflow. Simple compatibility limits setup time The optical insert is tailored for the NexiusZoom range (including NexiusZoom EVO and NexiusZoom ESD) and mounts to specific stands, which simplifies ordering and reduces integration uncertainty. Compatibility with stands P, PG, A, AP, U, B, BC and M ensures straightforward fitting where these supports are already in use. The designation of incompatible support (S stands) helps avoid mismatches at the planning stage, reducing downtime and incorrect purchases. Maintain practical image quality for inspection tasks As an auxiliary lens, this element modifies overall magnification while preserving the stereo microscopy characteristics important for depth perception and manipulation under the lens. The optical change increases the observable area without compromising operator ergonomics; fine detail remains readable thanks to the lens being designed to work within the NexiusZoom optical path. This makes the accessory suitable for PCB inspection, solder-joint checks, component alignment and general assembly control where overview and accessibility are both critical. Expert advice and reliable supply for workshop use Metav’s offering combines product knowledge with dependable logistics from Emmerich: the accessory is listed with precise technical parameters to support purchasing decisions and process planning. For more complex integration questions or to confirm stand compatibility in a specific setup, technical guidance is available by e‑mail or telephone; this helps ensure the auxiliary optics are applied correctly in production or lab environments and supports a smooth transition to the revised optical configuration. For precise overview tasks requiring a wider inspection field, contact Metav Werkzeuge for tailored advice on fitting the Euromex 0.5× auxiliary lens NZ.8905 and to check compatible stand options directly. Technical data Article number: NZ.8905 Manufacturer: Euromex Product type: Auxiliary lens Label: 0.5× auxiliary lens for NexiusZoom, working distance 183 mm Specifications Working distance: 183 mm Lens factor: 0.5× SKU: NZ.8905 Compatibility & features Compatible series: NexiusZoom; NexiusZoom EVO; NexiusZoom ESD Suitable stands: P, PG, A, AP, U, B, BC, M Not suitable for: S stands Cross-selling SKUs: NZ.1702-B; NZ.1702-M; NZ.1702-P; NZ.1702-PG; NZ.1703-B; NZ.1703-M; NZ.1703-P; NZ.1703-PG; NZ.1902-B; NZ.1902-B-ESD; NZ.1902-P; NZ.1902-P-ESD; NZ.1902-PG; NZ.1903-B; NZ.1903-B-ESD; NZ.1903-M; NZ.1903-P; NZ.1903-P-ESD; NZ.1903-PG FAQ How does the 0.5× lens factor affect magnification and field of view? The 0.5× auxiliary lens halves the effective magnification of the connected objective system and increases the field of view, allowing broader inspection areas with the NexiusZoom range while retaining a working distance of 183 mm for handling and tooling. Is the lens compatible with all NexiusZoom models? The accessory is compatible with NexiusZoom, NexiusZoom EVO and NexiusZoom ESD systems; compatibility is also dependent on the stand model, so confirm that the support is one of P, PG, A, AP, U, B, BC or M. Can this lens be used on S stands? No, the accessory is not suitable for S stands; selecting a compatible stand avoids mechanical or optical mismatch during installation. Will image clarity be maintained after fitting the auxiliary lens? Yes; when fitted to a compatible NexiusZoom setup the auxiliary lens is designed to maintain stereo characteristics and provide sufficient resolution for typical inspection and assembly tasks, while increasing the overview. Are there recommended accessories or related SKUs to consider? Related items are listed under the cross-selling SKUs in the technical section and can support alternative stands or additional configurations for NexiusZoom setups. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise close-up measurement with the combination of 20 dioptre magnification, a coated optical lens and a compact 0–19 mm measuring range for reliable visual inspection and reproducible readings to 0.05 mm; order via Metav Werkzeuge or contact the consultants for application advice. Precision measuring loupe M503.128 – 20 dioptre, coated lens (Metav IndustryLine) A compact optical measuring aid, the Precision measuring loupe M503.128 supports detailed inspection and visual measurement of small components in workshop and laboratory environments. 20 dioptre magnification Coated optical lens Measuring range 0–19 mm Reading resolution 0.05 mm Accuracy for close-range measurement The instrument is engineered to make visual measurement both fast and dependable: with a measuring range of 0–19 mm and a reading resolution of 0.05 mm, the loupe converts close inspection into quantifiable results, reducing guesswork during quality checks. The high 20 dioptre power gives a pronounced enlargement of fine edges and markings, so small deviations become visible without complex auxiliary optics. This clarity shortens inspection cycles and supports more efficient decision-making on pass/fail criteria. Optical performance that reduces rework A coated optical lens improves contrast and suppresses reflections, which is particularly beneficial when examining metallic surfaces or polished plastics under bright workshop lighting. The anti-reflective treatment enhances edge definition and visual comfort during extended use, helping operators maintain consistent assessments. By making defects easier to spot earlier in the process, the loupe contributes directly to lower scrap rates and fewer corrective operations. Compact design for practical handling With compact dimensions of 29×Ø29 and a lightweight plastic housing, the tool is easy to handle at the bench or on a production line. The small footprint and ergonomic form factor suit repetitive inspection tasks and enable steady positioning over microgeometries or connector pins. Durability is supported by the robust housing material, while the optical design keeps focal adjustment straightforward for rapid switching between components. Where this instrument adds value The loupe is ideal for electronics assembly, watchmaking, surface inspection and small-part quality control, where quick visual confirmation must be paired with measurable data. Using this device, inspection routines become more standardised: features that once required larger instruments can be reliably checked in situ, saving time and helping to maintain flow in busy workshops. For customers aiming to raise throughput without sacrificing scrutiny, the loupe offers a compact, efficient option. For purchase or tailored technical advice on the Metav IndustryLine Precision measuring loupe, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M503.128 GTIN: 4054469144610 ECLASS: 21170343 Customs tariff number: 90138090 Category: Optics Brand: Metav IndustryLine Facts Dioptre: 20 Measuring range: 0–19 mm Reading / resolution: 0.05 mm Dimensions: 29×Ø29 Visual enlargement: high-magnification class Special features Housing material: plastic Lens surface: coated (anti-reflective) Focusing: adjustable Intended use: close visual measurement and inspection FAQ What magnification does the loupe offer and how does it affect inspection? The Precision measuring loupe M503.128 uses a 20 dioptre optical system to provide pronounced enlargement, enabling detailed observation of edges and markings that improves the reliability of visual checks for small components. Can the instrument deliver measurable readings for quality control? Yes. The instrument combines visual enlargement with a measurable range of 0–19 mm and a reading resolution of 0.05 mm, making the tool suitable for quick in-process checks where documented visual measurements are required. Is the optical surface treated to reduce glare on metallic parts? The lens is coated, providing improved contrast and reduced reflections; this makes the loupe particularly effective when inspecting polished metals or reflective plastics under workplace lighting. Which applications are best suited to this measuring loupe? The device is well suited to electronics assembly, precision mechanics and component inspection tasks on the workshop floor where compact, repeatable visual measurement is needed; the Metav IndustryLine instrument is designed with these routines in mind. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the soft, lint-free cloth and gentle cleaning solution for reliable lens care; the compact two-piece kit ensures regular maintenance without downtime. Order the cleaning set directly via Metav Werkzeuge or ask the consultants for further advice. SCHWEIZER magnifier cleaning set — gentle solution & lint-free cloth (TECWERK) The SCHWEIZER magnifier cleaning set provides a compact, professional solution for the care of lenses and small optics in inspection and workshop environments. Soft, lint-free dry cloth Gentle cleaning solution for optics Suitable for glass and plastic lenses Compact two-piece kit for maintenance Preserves clarity and accuracy of inspection optics The kit is designed to maintain optical performance: the soft, lint-free cloth removes dust without abrasion while the gentle cleaning solution dissolves fingerprints and light grime. For measuring and inspection tasks, preserved lens clarity reduces measurement error and speeds visual checks. The set is suitable for delicate optical coatings and standard lens materials, helping to extend service intervals and sustain consistent visual results. Safe cleaning for both glass and plastic surfaces Formulated for a broad range of optical materials, the cleaning solution is appropriate for glass and a variety of plastics used in small optics and spectacles. The combination of non-abrasive wiping and a solvent-compatible formula prevents micro-scratches and coating damage, keeping surface transmission high. Explained simply: less surface damage means clearer images and reduced rework, which supports overall process quality in inspection and assembly operations. Compact kit to reduce downtime and simplify maintenance The compact two-piece configuration is ideal for bench-side storage or tool kits, enabling quick, scheduled maintenance between shifts. Routine care with this kit minimises the need for costly replacements and ensures consistent inspection quality. The small footprint makes it easy to keep a set at each workstation, supporting lean workflows and immediate corrective action when optics need attention. Trusted partner guidance and practical advantages When precision matters, reliable maintenance tools complement measurement instruments. Metav’s offering emphasises accessible precision: this cleaning set aligns with a pragmatic approach to workshop care, delivering straightforward, verifiable benefits such as reduced inspection interruptions and longer component life. The product supports established quality routines and integrates well with standard optical maintenance practices in workshops and technical departments. Contact Metav Werkzeuge for ordering or technical advice — reference SKU 4000851732NW and call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability for specific optics Technical data Article number: 4000851732NW Name: Reinigungsset 2-tlg.f.Lupenpflege SCHWEIZER Product type: Reinigungsset Content: 2-teilig Brand: TECWERK Facts Packaging unit: 1 Content pieces: 2 Special features Soft, lint-free special dry cloth Gentle cleaning solution for lenses and optics For care and cleaning of lenses, magnifiers and spectacles Suitable for glass and plastic optics FAQ How should the SCHWEIZER magnifier cleaning set be used on coated lenses? The SCHWEIZER magnifier cleaning set is intended for gentle care; use the lint-free cloth with the cleaning solution to remove deposits without rubbing aggressively, preserving coatings on lenses and small optics. Can the cleaning set be used on spectacles and plastic lenses? Yes, the kit is formulated for both glass and plastic surfaces and is suitable for spectacles and typical workshop magnifiers. What does the two-piece configuration include? The two-piece set comprises a soft, lint-free dry cloth and a gentle cleaning solution designed specifically for lens and optics maintenance. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Combine the 2.0x magnification with a standard C‑mount (25.4 mm) interface to extend imaging capability without changing the camera or objective; the robust adapter is designed for quick integration and consistent documentation. Order the CCD Adapter directly via Metav Werkzeuge or contact our consultants for compatibility advice. CCD Adapter DH‑C2.0 — 2.0x magnification, C‑mount (25.4 mm) by Metav IndustryLine A CCD Adapter that converts standard C‑mount cameras to enhanced optical inspection roles, providing stable 2.0x image enlargement for microscopy, quality assurance and visual documentation. 2.0x magnification for enlarged imaging C‑mount interface, 25.4 mm standard diameter Compact adapter for inspection optics Compatible with Metav IndustryLine CCD cameras Faster integration for inspection and measurement systems The adapter delivers 2.0x magnification while retaining the C‑mount standard, which simplifies mechanical and optical integration into existing setups. This combination reduces the need for additional sensor changes and keeps the optical path predictable, enabling rapid setup in production environments. The compact design supports straightforward alignment and repeatable mounting, so inspection loops and documentation processes become more efficient without compromising system throughput or traceability. Consistent image quality for documentation and analysis Designed for stability and repeatability, the unit maintains focus quality across the field of view and suits common CCD sensors used in industrial imaging. With a fixed 25.4 mm connection, the adapter minimises variable interfaces that can introduce vignetting or misalignment; this ensures reliable images for measurement, process control and archived documentation. The Metav IndustryLine pedigree contributes to consistent manufacturing tolerances and component fit, which supports long‑term reproducibility of captured images. Practical compatibility advice and system planning The adapter matches a wide range of C‑mount cameras and is intended for use in microscopy, bench inspection and machine‑vision pre‑applications where a modest, defined magnification boost is required. When integrating the adapter, consider sensor size and objective focal length to calculate resulting field of view and working distance; this avoids surprises in coverage or resolution. For procurement and system matching, reference M503.251.4 and provide camera sensor details when requesting confirmation to ensure components fit as expected. For system integration or to confirm camera compatibility, contact Metav Werkzeuge to discuss the Metav IndustryLine CCD Adapter (M503.251.4) and secure the correct configuration for inspection or documentation tasks Technical Data Article number: M503.251.4 GTIN: 4054469145310 eClass: 34551207 Manufacturer: Metav IndustryLine Facts Magnification: 2.0x Connection: C‑mount, 25.4 mm Type: DH‑C2.0 Category: Optik Special features Compact form factor for stable mounting Intended for microscopy and inspection use Image enlargement without camera modification FAQ Is this adapter compatible with standard C‑mount cameras? Yes. The adapter accepts a C‑mount (25.4 mm) connection and is compatible with common C‑mount CCD cameras; provide sensor size details to ensure the expected field of view. What magnification does the adapter provide and how does it affect field of view? The DH‑C2.0 offers 2.0x magnification, which reduces the field of view relative to a direct mount; calculate based on camera sensor size and objective focal length for precise coverage planning. Can the adapter be used for both microscopy and machine‑vision inspections? Yes. The adapter suits microscopy, bench inspection and preliminary machine‑vision applications where a defined, modest magnification increase is required. Which identifier should be quoted when ordering or enquiring? Quote the SKU M503.251.4 and the product type DH‑C2.0 to ensure the correct Metav IndustryLine adapter is supplied. Does the adapter include any additional lenses or mounting accessories? The main delivery covers the adapter itself; specify required mounting rings or extension components when enquiring to confirm compatibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise visual enlargement and reliable optical performance: the 2.0× magnification delivers clearer detail for inspection tasks while maintaining image sharpness and contrast. Order the Supplementary lens DH-W2.0 directly via Metav Werkzeuge or consult our specialists for compatibility advice. Supplementary lens DH-W2.0 — 2.0× magnification for video microscopes (Metav IndustryLine) the Supplementary lens DH-W2.0 extends the magnification range of compatible video microscopes for detailed visual inspection in laboratories and production environments 2.0× magnification boost Quick attachment to camera optics Preserves image sharpness and contrast Designed for video microscopes Greater detail where inspection demands it The 2.0× magnification increases the effective image scale, making fine structures and surface defects more visible without changing primary objectives. By enlarging the projection on the sensor, the supplementary optics improve visual resolution for defect analysis and component verification while keeping optical clarity and contrast at a practical level. This approach reduces the need for multiple objective swaps and supports efficient routine inspection workflows. Simple integration with existing imaging setups Designed for straightforward incorporation into microscopy chains, the accessory attaches directly to the camera or intermediate optical tube on compatible systems, minimising setup time and mechanical modification. As an add-on for video microscopes, the element preserves the focal plane and maintains field homogeneity when aligned correctly, enabling fast changeovers between inspection stations and steady throughput on the production line. Practical benefits for quality control and R&D In industrial and laboratory contexts the lens offers a pragmatic way to extend magnification without investing in separate objectives. The result is improved visual assessment for electronics inspection, materials analysis and component assembly checks while maintaining operational simplicity. Backed by the Metav distribution model, the item supports continuity of supply and predictable sourcing for manufacturing and service operations. For tailored advice on integrating the DH-W2.0 into existing inspection systems, contact Metav Werkzeuge for specification matching and order assistance: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M503.255.3 GTIN: 4054469145396 Tariff number: 90119090 Manufacturer: Metav IndustryLine Facts Magnification: 2.0× Special features Type: DH-W2.0 Category: Optik Application: increases magnification for video microscopes Asset: m5032551-main.jpg FAQ What magnification does this lens provide? The DH-W2.0 supplementary lens provides a 2.0× magnification factor, effectively doubling the image scale for compatible video microscopes (SKU M503.255.3). Will the lens fit every video microscope? Compatibility depends on the optical mount and system geometry; the accessory is intended for video microscopes with a matching adapter or tube connection and should be checked against the imaging chain before installation. Does the lens affect image quality? When correctly mounted and aligned, the lens preserves image sharpness and contrast while increasing apparent detail; image quality is influenced by the host optics and sensor resolution. Can the enlarged image be used for measurements? Enlargement changes the scale on the sensor, so any measurement workflow requires recalibration of the imaging system to ensure traceable results and correct scaling. What is included with the delivery? The delivery includes the lens unit identified by SKU M503.255.3; consult the product listing for available accessories and mounting adapters Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from reliable hands-free inspection with dual 2.2x and 3.3x magnification and a secure Velcro fastening, compatible with spectacle wearers; order the Peak head loupe directly via Metav Werkzeuge or request specialist advice from our consultants. Peak head loupe MS905.318 — 2.2x & 3.3x magnification, Velcro fastening The Peak head loupe is a hands-free magnifier designed for close visual inspection and fine assembly tasks, offering two levels of magnification for versatile use in workshops and labs. Hands-free head loupe with Velcro fastening Dual magnification: 2.2x and 3.3x Suitable for spectacle wearers Enhanced visual control for reliable inspection Equipped with two magnification settings — 2.2x and 3.3x — this head loupe provides clear enlargement for quality checks and delicate assembly. The selectable magnifications support a range of tasks, from broader component alignment to detailed surface inspection, enabling fewer repositionings and faster decision-making on the shop floor. By reducing the need to hunch over workpieces, the loupe contributes to steadier hands and more consistent results during repetitive operations. The design supports precision work without introducing complexity, making magnified inspection straightforward for technicians and craftsmen. Secure fastening and compatibility with spectacles The integrated Velcro fastening allows rapid adjustment and a secure fit for varied head sizes and working postures. As the device is expressly marked as compatible with spectacle wearers, the mounting system avoids interference with frames while maintaining a stable optical axis. This practical fastening method suits environments where quick removal and reapplication are necessary between tasks. The combination of a secure attachment and spectacle compatibility minimises interruptions, keeps the optical view centred and supports longer inspection sessions with reduced handling. Practical benefits that improve workflow efficiency A hands-free loupe frees both hands for manipulation, assembly and measurement, streamlining common workshop processes and reducing cycle times. The simplicity of the Peak head loupe means it can be introduced into existing workflows without additional training or fixtures. For professionals engaged in electronics, watchmaking, jewellery, optics or any precision inspection, the loupe offers a compact and reliable enhancement to visual acuity. Should further compatibility checks or application advice be required, Metav’s product specialists can provide guidance to ensure the loupe meets the specific demands of the task at hand. Contact Metav Werkzeuge in Emmerich for tailored advice and availability on the Peak head loupe MS905.318 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS905.318 Brand: Peak Product name: Head loupe Facts Magnification: 2.2x, 3.3x SKU: MS905.318 Special features Velcro fastening Compatible with spectacle wearers FAQ What magnification options does the loupe offer? The loupe provides 2.2x and 3.3x magnification, giving a choice between a wider field of view and higher detail for close inspection with the Peak head loupe MS905.318. Can the loupe be worn over regular spectacles? Yes, the product is specified as compatible with spectacle wearers, and the Velcro fastening allows adjustment to accommodate frames while keeping the optical axis stable. How is the loupe attached and adjusted? Attachment and size adjustment are handled via the Velcro fastening, enabling quick fitting and a secure hold during routine inspection tasks. Which tasks is the loupe best suited for? The head loupe is suitable for fine-detail inspection and assembly work, such as electronics, watch or jewellery inspection, optical checks and any task requiring hands-free magnification. Is the loupe practical for extended use? Designed for hands-free operation with an adjustable fastening, the loupe supports prolonged inspection sessions by keeping both hands free and reducing the need for frequent repositioning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Thanks to its flexible magnification range and secure head fitting, this loupe combines adaptable visual performance with hands-free comfort for repetitive inspection tasks. Use the Peak head loupe for precision visual checks in optics, electronics and fine assembly — order directly via Metav Werkzeuge or consult our specialists for suitability and application advice. Peak head loupe MS905.317 — 2.2x–5.2x magnification, Velcro fastening Peak head loupe MS905.317 is a compact head-mounted magnifier designed for detailed inspection and assembly tasks in optics and precision workshops Peak head loupe with four magnification levels Velcro fastening for secure head fit Suitable for spectacle wearers Hands-free inspection for detailed work Precision at varying scales for thorough inspection The head-mounted loupe provides four distinct magnification levels — 2.2x, 3.3x, 4.1x and 5.2x — enabling clear visual grading of small components without changing work posture. This graded optical range supports both broad overview checks at lower magnification and focused inspection at higher levels, reducing the need for multiple tools and speeding up visual quality control. The specification of several optical powers allows a rational selection for each inspection task, improving throughput while maintaining consistent visual clarity. Secure, hands-free operation that supports productivity Equipped with a reliable Velcro fastening, the loupe stays firmly in position during prolonged tasks, allowing operators to keep both hands free for tools and measuring instruments. Hands-free inspection reduces handling errors and shortens cycle times in repetitive assembly or measurement processes. Comfortable mounting and steady alignment help preserve consistent working distance, which in turn supports repeatable visual checks and a measurable increase in operational efficiency on the shop floor. Designed to work with spectacle wearers and fine measurement The specification explicitly states suitability for spectacle wearers, so the loupe accommodates operators who require corrective lenses without compromising field of view or comfort. This compatibility is especially relevant when visual checks must be combined with precision measurement routines, where maintaining correct eye position and focus is essential. The optical arrangement helps maintain an effective working distance for both inspection and comparative verification against caliper readouts and other gauges. Practical optics for workshop and laboratory use As a dedicated tool from the optics category, the loupe supports a wide range of close-vision tasks in electronics, watchmaking, optical assembly and similar trades where visual detail is critical. The combination of selectable optical powers and a secure head mount makes it a dependable aid for both short inspection intervals and extended benchwork. Where consistent visual performance matters, this head-mounted magnifier contributes to steadier results and fewer rework steps, aligning with operational goals for quality and repeatability. Contact Metav Werkzeuge to discuss how the Peak head loupe MS905.317 can improve inspection accuracy in the workplace; our consultants in Emmerich are available by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com for technical guidance and ordering support Technical data Article number: MS905.317 Brand: Peak Type: Head loupe Core data Magnification: 2.2x / 3.3x / 4.1x / 5.2x Special features Velcro fastening Suitable for spectacle wearers Category: Optics FAQ How many magnification settings does the loupe offer? The Peak head loupe MS905.317 offers four discrete magnification settings: 2.2x, 3.3x, 4.1x and 5.2x to suit a range of inspection needs. Can the loupe be used while wearing glasses? Yes, the loupe is specified as suitable for spectacle wearers and is designed to be worn comfortably over corrective lenses. Is the head fastening adjustable for different head sizes? The Velcro fastening provides an adjustable, secure fit that adapts to a wide range of head sizes and hair conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine 99% purity with a compact 200 ml format for dependable bench‑side solvent performance and precise, low‑residue cleaning; order the Euromex product directly via Metav Werkzeuge or consult their specialists for application advice. Isopropyl alcohol 99% 200 ml — High‑purity solvent by Euromex Isopropyl alcohol 99% 200 ml serves as a high‑purity solvent designed for precision cleaning and general solvent tasks in laboratory and workshop environments. Ultra‑pure 99% concentration Compact 200 ml bottle for bench use Low‑residue, fast evaporation Laboratory grade from Euromex Reliable cleaning power for precision tasks The 99% purity guarantees a solvent with minimal water content, which improves solvency for oils and light residues while reducing drying times. The high concentration results in consistent low‑residue performance, making the solution suited to delicate cleaning tasks where contaminants must be removed without leaving films. This technical clarity supports efficient maintenance of instruments and bench equipment and reduces repeat cleaning cycles. Practical packaging that fits the workflow Supplied in a 200 ml bottle, the solvent is intended for bench‑side use where a compact container aids handling and storage. The packaging minimises waste and facilitates measured application during routine maintenance. For technicians and small laboratories, the compact format combines workplace convenience with easy replacement intervals, helping to streamline day‑to‑day cleaning procedures without committing to bulk containers. Clear advantages for workshop and laboratory use As a high‑purity solvent, the formulation is engineered to offer reliable degreasing and cleaning results while evaporating rapidly to limit downtime. Rapid evaporation supports faster turnaround on cleaned components and reduces the need for secondary drying. Where precision and cleanliness matter, the solvent provides a technically sound option that balances performance with practical handling characteristics. Handling and safe use guidance The solution is volatile and should be used with standard precautions: use in a well‑ventilated area, avoid ignition sources and store the bottle securely when not in use. For specific application guidance or compatibility checks with sensitive materials, technical consultation is available to determine suitability for particular procedures. If additional documentation or safety data sheets are required, experts can provide further details. Request technical advice from Metav Werkzeuge for application recommendations of this Euromex high‑purity solvent — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: PB.5274 Name: Isopropyl alcohol 99% 200 ml Brand: Euromex Packaging: Bottle Facts Volume: 200 ml Concentration: 99 % Special features High‑purity solvent Fast evaporation and low residue Compact bottle for bench‑side use Laboratory grade by Euromex FAQ What does 99% concentration mean for cleaning performance? A 99% concentration indicates very low water content; the result is stronger solvency and faster evaporation compared with aqueous blends, which improves cleaning efficiency for light oils and residues. Is this solvent suitable for precision instrument cleaning? The Euromex isopropyl alcohol in this format is intended for precision cleaning tasks and bench‑side applications where a high‑purity solvent and low residue are required. How should the bottle be stored between uses? Store the bottle in a cool, well‑ventilated area away from ignition sources and direct heat; ensure the cap is closed to limit evaporation and maintain the solution’s purity. Will significant residue remain after evaporation? When used as intended, the formulation provides low‑residue evaporation; thorough technique and appropriate application volumes further reduce any residual films. What information identifies this product for reordering? The product is listed under SKU PB.5274 and sold as Isopropyl alcohol 99% 200 ml by Euromex, which helps ensure consistent replacement of the exact solvent grade. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact and highly portable inspection capability combined with 200× magnification and an accurately graduated 0.005 mm scale provides fast visual checks and measurable results for workshop and field tasks. Order directly via Metav Werkzeuge or consult the technical team for suitability and supply. M503.119 Handheld microscope — 200× with LED and 0.005 mm scale (Metav IndustryLine) The M503.119 handheld microscope is a compact inspection instrument offering high magnification and integrated illumination for fast quality checks and simple measurement tasks in production, maintenance and incoming inspection. 200× magnification for detailed inspection 0.005 mm scale division for precise measurements Integrated LED illumination for clear images Compact polyamide housing, weight 0.1 kg High-magnification inspection in a compact format This handheld inspection device delivers 200× magnification, enabling close examination of fine structures that are otherwise difficult to assess with the naked eye. The design emphasises portability and ergonomics, with a lightweight 0.1 kg body and small footprint (50 × 23 × 138 mm) for use at benches, machines or on-site. The reduced mass and slim form factor help to lower fatigue during repetitive checks and permit rapid visual screening across multiple components. Measurable results thanks to fine graduated scaling A 0.005 mm scale division offers a clearly defined measurement increment for rough sizing and comparative checks directly under magnification. The scale, combined with a 1.1 mm field of view, allows readable comparative measurements of edges and surface features; the graduation supports quick verification of critical dimensions in assembly or quality control operations. This measurable output reduces the need for repeated handling and speeds decision-making in production workflows. Robust optics and illumination for consistent readings Optical performance is supported by a coated lens, improving contrast and light transmission for sharper images. Integrated LED illumination provides steady, shadow‑reduced lighting for inspection in poorly lit environments, ensuring consistent visibility of details. The housing is manufactured from polyamide, combining impact resistance with a lightweight build suitable for workshop conditions. These attributes make the instrument a reliable aid for maintenance teams, quality inspectors and technical staff requiring immediate visual assessment. For advice on integrating Metav IndustryLine optical tools into workshop routines or to request supply from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s consultants will confirm suitability and delivery options. Technical Data SKU: M503.119 GTIN: 4054469144535 Weight: 0.1 kg Dimensions: 50 × 23 × 138 mm Data Magnification: 200× Scale division: 0.005 mm Field of view: 1.1 mm Dioptre/magnification value: 200 Special features Housing made from polyamide Coated lens for improved contrast Integrated LED illumination Graduated scale included (type: G) Intended for visual inspection and simple measurements FAQ How precise are the measurements with this handheld microscope? Measurements with the M503.119 handheld microscope rely on the visible 0.005 mm scale divisions; they are suitable for quick comparative checks rather than replacement of laboratory metrology instruments Is the illumination suitable for low-light environments? Yes. The integrated LED illumination provides even, stable lighting to support clear observation and reading of the scale on the Metav IndustryLine handheld microscope What materials are used for the housing and optics? The instrument features a polyamide housing for durability and a coated lens to enhance image clarity and contrast Can this instrument be used directly at production machines? The compact dimensions and lightweight construction make it suitable for on‑machine or at‑bench inspections where rapid visual checks and rough measurements are required What identifiers should be quoted when enquiring about this product? Please reference the product as Metav IndustryLine M503.119 handheld microscope (SKU M503.119, GTIN 4054469144535) when requesting technical information or supply Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact inspection tool that combines 200× magnification, a coated objective lens and switchable LED lighting for reliable visual checks on the shop floor. The combination of precise optics, robust polyamide housing and very low weight supports fast, repeatable inspections. Order the device directly via Metav Werkzeuge or request advice from our consultants. Handheld microscope M503.118 — 200× magnification with LED illumination (Metav IndustryLine) The M503.118 is a compact handheld microscope designed for rapid visual inspection and close-up quality control in workshops, production lines and service environments. 200× magnification for fine-detail inspection Switchable LED illumination for clear contrast Coated objective lens for reduced reflections Lightweight 0.05 kg; compact 50 × 23 × 138 mm Precision where detail matters The core advantage is the 200× magnification, which enables clear visualisation of microstructures, solder joints and surface flaws that are invisible to the naked eye. The coated objective lens reduces stray reflections and improves contrast, making defect recognition faster and more reliable. For users unfamiliar with optical terms: a coated lens means multiple thin-film layers have been applied to the glass to suppress glare and increase light transmission — a straightforward measure that delivers clearer images without complex settings. Designed for practical, everyday inspection Built with a polyamide housing, the unit resists knocks and handling typical for workshop use while remaining exceptionally light at 0.05 kg. The compact dimensions (50 × 23 × 138 mm) and single-handed form factor support quick checks across production stations, assembly benches or service calls. The integral LED illumination is switchable, providing consistent light without the need for external lamps; this simplifies workflows and reduces setup time during repetitive inspection tasks. Suitable applications and confidence in supply This portable optic is suited to routine quality control, electronic assembly checks, material surface evaluation and hobbyist uses where compactness and clarity are priorities. The combination of proven optical design and durable housing means the device performs well in busy industrial environments. Metav’s role as a precision partner ensures reliable delivery and a quality filter for the European market — a practical reassurance when equipping multiple workstations or service teams. Contact Metav Werkzeuge today for technical advice or to request the Metav IndustryLine M503.118 handheld microscope with 200× magnification and LED illumination Technical Data SKU: M503.118 GTIN: 4054469144528 eClass: 32130101 ETIM: EC001685 Customs tariff number: 90111090 Manufacturer: Metav IndustryLine Numbers / Core technical data Magnification: 200× Weight: 0.05 kg Dimensions (L × W × H): 50 × 23 × 138 mm Field of view: 1.1 mm Special features / Designs Housing: polyamide Lens: coated Illumination: switchable LED Category: Optik FAQ What magnification does the device provide? The M503.118 provides 200× magnification, suitable for close inspection of fine details and small components. Is the objective lens treated to reduce reflections? Yes — the M503.118 features a coated objective lens, improving contrast and reducing glare for clearer observation. How large is the visible field when inspecting? The visible field is approximately 1.1 mm, which balances magnification with a usable area for focused inspections. How portable is this inspection tool? Weighing 0.05 kg with compact dimensions of 50 × 23 × 138 mm, the unit is designed for single-handed, mobile use across production and service environments. Which environments and tasks is the microscope suited for? It is appropriate for workshop quality control, electronic assembly checks, surface inspections and similar tasks where a compact, illuminated handheld optic is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact 40× magnification and a Ø20 mm precision lens for fast, reliable visual inspection; the integrated LED illumination ensures consistent lighting while the low weight supports prolonged handheld use. Order the loupe directly via Metav Werkzeuge or consult the experts for tailored advice. Hand lens M503.144 – 40× magnification, Ø20 mm lens, Metav IndustryLine Hand lens M503.144 for close visual inspection and quality control in workshops, laboratories and precision trades; a compact inspection lens designed for detailed work on small components and fine surfaces 40× magnification for fine detail Ø20 mm glass lens for sharp imaging Built-in LED illumination for shadow-free view Lightweight 200 g for portable inspection Precise close-up inspection for quality assurance The compact loupe delivers a magnification of 40×, which transforms tiny surface features into clearly discernible details and makes it easier to identify burrs, hairline cracks and assembly faults. The Ø20 mm optical element is optimised for a balance between field of view and resolving power: it provides a focused image area large enough to inspect small components without compromising sharpness. The combination of magnification and a high-quality lens supports quicker visual decisions during incoming inspection and final checks, reducing rework and improving process efficiency. The instrument’s svelte form helps retain steady handling for repetitive tasks, contributing to consistent inspection outcomes. LED illumination that speeds inspection and reduces eye fatigue An integrated LED light delivers even, shadow-minimised illumination that improves contrast and reveals surface textures that would otherwise remain hidden under ambient lighting. Consistent lighting reduces the need for frequent repositioning, accelerating routine checks and helping operators maintain productivity during longer inspection cycles. The inspection lens is designed to work with replaceable batteries, allowing uninterrupted use in remote workstations or on the shop floor. The robust illumination system also supports visual tasks under variable workshop lighting, making the loupe suitable for electronics, engraving and fine mechanical work. Portable design for craftsmen and precision technicians Weighing in at just 200 g, the loupe is engineered for portability and comfortable handheld use across prolonged periods. Its compact footprint and ergonomic balance suit jewellers, watchmakers, electronics technicians and quality control personnel who require a reliable, transportable optical aid. The durable construction withstands everyday workshop conditions while the clear optics maintain image fidelity over time. For facilities seeking cost-effective inspection aids, this loupe combines essential optical performance with low handling effort, helping teams maintain inspection throughput without complex fixtures or setup. Speak to Metav Werkzeuge in Emmerich for expert advice on inspection optics and reliable supply from our European quality hub Technical Data Article number: M503.144 GTIN: 4054469163246 Eclass: 21170614 Weight: 0.2 kg Facts Magnification: 40× Lens diameter: Ø20 mm Diopter: 40 Category: Optik Special features Integrated LED illumination Compact, handheld design Suitable for workshop and laboratory inspection Manufacturer: Metav IndustryLine FAQ What level of magnification is provided? The hand lens M503.144 provides 40× magnification, suitable for inspecting small defects and fine details in components. What size is the viewing lens? The inspection optic features a Ø20 mm lens, chosen to balance a usable field of view with high image sharpness. Is the loupe illuminated? Yes, the M503.144 includes an integrated LED light to ensure even, shadow-free illumination during inspection. Which applications suit this loupe? This loupe is ideal for jewellers, watchmakers, electronics technicians and workshop quality control where detailed visual checks are required. Is the instrument easy to carry between workstations? Yes, the loupe’s lightweight design (0.2 kg) and compact dimensions make the M503.144 convenient for portable, handheld use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining 20x magnification, a lightweight aluminium body and a vented tube that prevents lens fogging, this inspection loupe delivers precise, fatigue‑reduced examination of small parts; order the Peak A80D via Metav Werkzeuge or request tailored advice from our consultants. Peak A80D Loupe — 20x magnification, aluminium housing Peak A80D Loupe is a compact inspection loupe designed for detailed work on watches, jewellery and other small components where clear, dependable magnification is essential 20x precision magnification Aluminium housing for durability Vent in tube prevents lens fogging Ideal for watches and jewellery inspection See tiny features clearly and reduce rework The 20x optical power provides a focused view of minute details, enabling reliable detection of surface defects, soldering flaws or hallmark stamps. As a precision inspection tool, the loupe shortens inspection time by making faults plainly visible, which supports more efficient quality control and fewer callbacks. The instrument’s clear optics translate technical capability into practical benefit: faster decisions and better documented results for small‑part manufacturing and repair. Comfortable, interruption‑free working for prolonged use Constructed with a lightweight aluminium housing and an engineered tube vent, the loupe reduces operator fatigue and prevents sudden lens clouding during temperature changes. The small anti‑fog aperture in the tube maintains a usable field of view during extended sessions, so inspections continue without pauses for cleaning. Ergonomic handling and steady optics mean longer, more productive measuring or assembly periods when dealing with fine components. Durable, workshop‑ready design that is easy to maintain The straightforward mechanical design keeps servicing minimal: robust casing resists everyday knocks and the optical tube can be wiped clean with standard lens cloths. As a compact inspection loupe, it bridges bench‑level craftsmanship and precision metrology by offering repeatable, visible results across routine tasks. Its suitability for delicate applications such as watch repair and jewellery assessment makes it a pragmatic addition to any workshop toolkit focused on quality and longevity. Choose the Peak A80D for dependable 20x inspection—contact Metav Werkzeuge in Emmerich for availability and expert advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: MS905.301 Model: A80D Brand: Peak Facts Magnification: 20x Lens count: 1 (single lens optical tube) Material: Aluminium Special features Small vent in tube to prevent lens fogging Suitable for watches and jewellery inspection Category: Optics Image asset available: MS905301-main.jpg FAQ What magnification does the loupe provide? The loupe offers 20x magnification, enabling clear inspection of fine details on small components. Is the loupe suitable for watch and jewellery work? Yes, the Peak A80D is specifically suitable for watch and jewellery inspection and other tasks requiring close visual inspection of small parts. How does the anti‑fog feature work? A small vent in the optical tube allows air exchange that reduces condensation on the lens, keeping the field of view clear during temperature changes. What material is the housing made from and is it durable? The housing is made from aluminium, providing a durable yet lightweight construction suited to workshop use. Manufacturer: Peak; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com