Mikroskopie für Profis, Fortgeschrittene und Einsteiger

Compact precision for routine optical checks: the Ø20 mm aperture delivers consistent reference points, while the standard format simplifies integration into inspection setups. Benefit from dependable repeatability and straightforward handling — order via Metav Werkzeuge or consult our specialists for application advice. Peak Standard Template (Ø20 mm) – Optical calibration gauge Peak Standard Template for basic optical checks and routine calibration in inspection and microscope alignment applications. Standard optical reference Ø20 mm Supplied as a single piece for traceability Designed for simple integration into inspection rigs Reliable references that reduce rework and inspection time The template provides a stable reference for repeated optical checks, helping to reduce unnecessary re-measurements and rework. Built as a standard item, the device supports quick verification processes and minimises downtime between tests. By using a consistent aperture size, operators achieve uniform results across multiple checks, improving throughput in small-series or workshop environments. The emphasis is on measurable benefits: faster set-up and fewer ambiguous readings during visual inspection. Integration into everyday inspection workflows Configured in a standard format, the gauge is suitable for straightforward placement within existing inspection jigs and optical benches. Its Ø20 mm aperture offers a recognisable datum that aligns with common calibration routines, allowing technicians to validate optical paths or align components with minimal adjustment. This simplicity makes the unit a practical addition to workshops and labs that require dependable, repeatable references without complex fixtures or special training. Clarity in results and easy documentation Using a uniform reference piece enhances traceability and eases the documentation of inspection results. When recorded alongside measurement data, the presence of a standard template helps establish consistent pass/fail criteria and supports quality audits. The standardised format reduces interpretation variance between operators, so acceptance criteria remain stable and downstream decisions are better founded on reliable optical checks. Practicality for small workshops and service departments Supplied as an individual item and categorised for optical use, the template suits smaller operations that prioritise cost-effective precision. Its compact nature facilitates storage and fast deployment, while the standard design keeps training requirements low. For service departments that manage diverse inspection tasks, a simple, dedicated optical reference can streamline daily routines without the need for elaborate calibration equipment. For consistent optical calibration and straightforward integration, request the Peak standard template (SKU MS905.272) through Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical Data Article number: MS905.272 Brand: Peak Designation: Peak Standardschablone Variant: einzeln, Ø20mm Category: Optik Facts Diameter: Ø20 mm Special features Standard template for optical checks Supplied as a single piece Suitable for use in inspection and alignment setups FAQ What is the aperture size of the template? The template features a Ø20 mm aperture and is listed under SKU MS905.272 by Peak, suitable as a consistent optical reference. Is the item supplied individually or in sets? The article is supplied as a single piece (einzeln), making it convenient for targeted inspection tasks and easy traceability. For which applications is this template intended? The template is intended for optical checks, calibration routines and alignment tasks within inspection setups and microscopes, providing a repeatable reference point. Does the template require special fixtures to be used? No special fixtures are required; the standard design is intended for simple integration into existing inspection rigs and benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

- Stereokopf mit hochwertiger Optik • Okular Weitfeld 10x • Stativ mit Feineinstellung • Stromversorgung 230 V / 50 HzTechnische Daten- Vergrößerung: 20X + 40X- Zoom: -- Arbeitsabstand: 60mm- Licht: 12 V, 10W

Take advantage of 20× magnification and a Ø30 mm barrel for reliable, high‑contrast inspection; the compact design with a 14 mm field of view supports precise visual checks and repeatable results. Order the SWH20X eyepiece directly via Metav Werkzeuge or contact our consultants for application advice. SWH20X eyepiece — 20× magnification, Ø30 mm barrel for stereo microscopes The SWH20X eyepiece provides 20× magnification for stereo microscopes, delivering compact, high‑resolution viewing for inspection and assembly tasks. 20× magnification for fine detail Ø30 mm barrel diameter for standard mounts 14 mm field of view for accurate visualisation High magnification that improves inspection accuracy The 20× magnification offers a clear enlargement that helps to detect fine features and surface defects without complex optics. With a 14 mm field of view, this eyepiece balances magnification and observable area, making it easier to compare component features and reduce rework. The construction supports stable imaging, ensuring that visual checks are faster and more reliable, which contributes directly to improved quality control and reduced inspection time. Designed for straightforward integration into stereo setups Compatibility is simplified by the Ø30 mm barrel diameter, which fits common stereo microscope eyetubes. The compact form factor enables quick swapping between eyepieces and preserves the optical alignment of the main instrument. Integration with existing microscopy systems keeps downtime to a minimum and supports flexible workflows in both laboratory and workshop environments. For specific system pairings, Metav Werkzeuge can advise on mechanical fit and optical matching. Practical handling that supports daily workflows Lightweight and compact, this eyepiece is easy to handle during repetitive inspection tasks, reducing operator fatigue and maintaining measurement consistency. The optical design prioritises contrast and clarity, helping users make confident visual decisions during assembly, QA or research. The combination of magnification, field of view and standard mounting makes the eyepiece a pragmatic choice when balancing resolution needs and operational efficiency. Contact Metav Werkzeuge for compatibility checks or a quotation for the Metav IndustryLine SWH20X eyepiece with 20× magnification and Ø30 mm barrel Technical data SKU: M503.241.3 GTIN: 4054469145143 Type: SWH20X Category: Optics Facts Magnification: 20× Barrel diameter: Ø30 mm Field of view: 14 mm Weight: 0.5 kg Tariff number: 90119090 eClass: 21160592 Special features Designed for stereo microscopes Compact eyepiece for high‑magnification inspection Category tag: Optik Brand: Metav IndustryLine FAQ Is the SWH20X eyepiece compatible with standard stereo microscope mounts? The SWH20X eyepiece from Metav IndustryLine uses a Ø30 mm barrel and is intended for use with stereo microscopes featuring the corresponding eyetube diameter; check the instrument specification to confirm fit. What does the 14 mm field of view mean in practice? A 14 mm field of view indicates the visible diameter through the eyepiece at the chosen magnification, enabling a balance between magnified detail and the area visible for inspection with the SWH20X eyepiece. Will the 20× magnification affect depth perception in stereo viewing? Higher magnification increases apparent detail while preserving stereo depth cues when used with compatible stereo microscopes; the SWH20X eyepiece is designed to retain sufficient depth perception for assembly and inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining a 30 kg permanent magnetic hold, an adjustable tilt and a compact 210 mm height, this lamp provides reliable hands-free illumination for inspection and maintenance tasks in confined or vertical workspaces; order directly via Metav Werkzeuge or contact the consultants for tailored advice. LED lamp with permanent magnet M208.115 — 30 kg holding force, 210 mm height (Metav IndustryLine) The LED lamp with permanent magnet M208.115 is a compact, magnetically mountable inspection light designed for workshop, machine and optical tasks where stable, directed illumination and flexible positioning are required. 30 kg permanent magnetic hold Adjustable tilt angle for directed light Compact 210 mm height for tight spaces Runs on 3x Micro‑AAA batteries (not included) Stable, hands‑free lighting that speeds workflow The strong 30 kg magnetic hold ensures secure attachment to ferrous surfaces, turning the lamp into a dependable hands‑free inspection light that reduces the need for clamps or temporary supports. With a low mass of 0.45 kg and a compact base (Ø30x27, M4), the unit stays put on vertical and horizontal steel faces, improving repeatability during assembly checks and visual inspections. This stability translates into fewer interruptions and a faster inspection routine, making the lamp a practical choice for production floors and maintenance stands where steady, focused illumination prevents rework and inspection errors. Precise beam direction for detailed work in restricted spaces An adjustable tilt angle allows the lamp to be angled to illuminate concealed features or the underside of assemblies without repositioning the object. The overall height of 210 mm and slim profile make it suitable for tight access points and bench work, while battery operation (3x Micro‑AAA, not supplied) removes the constraint of nearby mains sockets and extension leads. Portable and ready within seconds, this magnetic LED lamp supports rapid on‑the‑move inspections, quality checks and optical adjustments where controlled lighting is essential for detecting fine defects or alignment issues. Practical build and workshop compatibility for everyday use Constructed for routine industrial use, the device pairs a robust magnetic base with a compact LED head that resists everyday workshop handling. The lamp’s low weight and mounting geometry make it quick to transfer between machines, jigs and inspection fixtures. Classified under optics applications, the unit suits technicians, maintenance engineers and optical inspection teams who require a reliable, low‑complexity illumination tool that integrates seamlessly with existing processes. The simple power concept and durable magnetic attachment lower downtime and simplify storage on tool boards or in kits. Select the Metav IndustryLine magnetic LED lamp for dependable, portable inspection lighting and contact Metav Werkzeuge for supply details or consultancy on integrating the device into existing workflows via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M208.115 GTIN: 4054469104836 eCl@ss: 27110390 ETIM: EC001959 Customs tariff number: 90178090 Facts Height: 210 mm Weight: 0.45 kg Magnetic holding force: 30 kg Base: Ø30x27, M4 Power: 3x Micro‑AAA (not included) Category: Optics Features Adjustable tilt angle Battery operation for portability Compact footprint for tight spaces Durable magnetic base for hands‑free use Portable inspection LED lamp FAQ What surfaces are suitable for mounting the magnetic lamp? The magnetic base of the LED lamp with permanent magnet M208.115 secures reliably to ferrous, flat or slightly curved steel surfaces; the Ø30x27 base and 30 kg holding force ensure stable hands‑free mounting during inspection work. How is the lamp powered and how long does it run? The unit runs on three Micro‑AAA cells (not included). Run time depends on battery type and LED load; alkaline cells provide longer service than basic zinc‑carbon cells for extended inspection shifts. Can the tilt be locked in position for repeatable measurements? The adjustable tilt angle is designed to remain steady once set, allowing repeatable directed illumination for recurring inspection points without additional fastening. Is the lamp suitable for optical inspection tasks? Yes; classified under optics applications, the lamp provides focused, stable illumination that supports visual inspection, alignment and small‑part examination in workshops and machine rooms. Does the lamp include any mounting accessories? The product is supplied as a compact magnetic LED lamp unit; further mounting accessories are not listed in the product information. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the compact 21 mm lens and 10× magnification for precise close-up inspection; the robust metal housing ensures durable daily use while the coated glass improves contrast. Order the loupe directly via Metav Werkzeuge or request advice from our consultants if technical guidance is required. Loupe 21 mm — 10× magnification, 10 dioptre (Metav IndustryLine) The Loupe 21 mm is a compact inspection magnifier designed for fine-detail work in optics, electronics and watchmaking, combining a small footprint with robust construction 21 mm coated lens 10× magnification Metal housing Compact inspection magnifier Enhanced clarity for precision inspection A small yet powerful inspection tool, this loupe offers a 21 mm optical field with 10× magnification and a 10 dioptre lens power, providing clear enlargement for fine structures. The coated lens reduces glare and improves contrast, which makes defect detection and component inspection faster and less error-prone. For applications where clear visual definition matters—such as PCB inspection, jewellery appraisal or micro‑mechanical assembly—the compact magnifier delivers measurable benefits in throughput and accuracy without adding complexity. Built to endure everyday workshop demands The loupe’s metal housing gives a rigid, impact‑resistant shell that withstands workshop handling and frequent transport. At approximately 0.1 kg, the instrument is lightweight enough for one‑handed use yet substantial enough to feel stable during inspection. The combination of durable casing and a treated optical surface means longer service life and fewer replacements, contributing to lower total cost of ownership for production lines and service benches that require reliable visual inspection tools. Practical advantages and user experience Designed for immediate use in industrial and craft environments, the magnifier is easy to position and quick to focus on small features; the coated lens enhances perceived sharpness, reducing eye strain during repetitive checks. The compact design fits into tight workstations and tool pouches, enabling inspections directly at the machine or assembly station. Where repeatable visual assessment is part of quality control, this loupe supports efficient decision‑making through consistent enlargement and improved visibility. For dependable close‑up inspection choose the Metav IndustryLine loupe and contact Metav Werkzeuge in Emmerich for ordering and technical advice. Technical data Article number: M503.151 GTIN: 4054469144696 eClass: 21170614 Customs tariff number: 90138090 Measurements & optical data Lens diameter: Ø21 mm Magnification: 10× Dioptre: 10 Weight: 0.1 kg Materials & features Metal housing Coated lens Category: Optics Label: Loupe 21 mm 10× 10 dioptre FAQ What magnification does the loupe offer? The loupe provides 10× magnification with a 10 dioptre optical power for detailed visual inspection. Is the lens treated to reduce reflections? Yes, the loupe features a coated lens to improve contrast and reduce glare during close‑up inspection. Which applications suit this magnifier best? The design is suitable for precision tasks in electronics, watchmaking, jewellery inspection and general optics checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise 6× magnification, a clear 22.8 mm lens and a compact Tech‑Line design for faster, more reliable component inspection; order the loupe directly via Metav Werkzeuge or consult our advisers for application guidance. Tech‑Line watchmaker's loupe — 6× magnification, lens Ø 22.8 mm (SCHWEIZER) The Tech‑Line watchmaker's loupe offers 6× magnification and a 22.8 mm lens for close visual inspection in watchmaking, jewellery work and fine electronics assembly. 6× magnification for precise inspection 22.8 mm high‑clarity lens for a wide viewing field Compact Tech‑Line format for workshop portability Suitable for watchmaking, jewellery and electronics inspection See fine detail with dependable optics The specified 6× magnification delivers a balance between enlargement and depth of field, enabling detailed examination of small components without excessive loss of context. The 22.8 mm lens diameter increases the usable viewing area, which means fewer adjustments when inspecting gear teeth, pivots or solder joints. For technicians unfamiliar with optical terminology: magnification describes how much larger an object appears, while lens diameter affects the field of view and the ease of position‑finding during inspection. These characteristics combine to reduce inspection time and improve defect detection rates. A compact tool built for regular workshop use Compactness and straightforward handling are central to the Tech‑Line concept: the loupe slips easily into a pocket or a tool pouch and is ready whenever a quick visual check is required. The design supports repeated use in production and bench work without creating workflow interruptions. For quality control routines and intermittent inspections, the loupe provides a rapid method to verify component integrity, alignment and finish, helping to maintain consistent throughput and reduce rework. Practical handling that improves visual comfort Clear optics and an appropriately sized lens help to reduce eye strain during extended inspection tasks. The optical configuration allows for comfortable working distances typical in watchmaking and precision assembly, so operators can inspect parts with less fatigue and greater concentration. Where soldering, finishing or micro‑adjustment is performed, the loupe helps to deliver reliable visual feedback that supports accurate manual operations. Boosting efficiency in precision assembly and QA In small‑part assembly, speeding up inspection without sacrificing accuracy is a measurable gain. The loupe's optical specification makes it useful for quick incoming checks, assembly verification and post‑repair inspections. As an inexpensive, low‑maintenance visual aid, it complements microscopes and measuring instruments by offering immediate, on‑the‑spot evaluation. For workshops aiming to standardise routine checks, this inspection loupe contributes to repeatable outcomes and a reduction in avoidable errors. For precise inspection tasks, trust the SCHWEIZER Tech‑Line 6× watchmaker's loupe — contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 4000851734NW SKU: 4000851734NW Type: Tech‑Line Brand: SCHWEIZER Specifications Magnification: 6× Lens diameter: 22.8 mm Packaging unit: 1 UID: 4000851734NW Features Product type: watchmaker's loupe Label: Uhrmacherlupe Tech‑Line Vergr. 6x Linsen‑Ø 22,8 mm Schweizer Series: Tech‑Line FAQ What magnification does this loupe provide? The Tech‑Line watchmaker's loupe provides 6× magnification, suitable for detailed inspection of small mechanical parts and soldered joints. What is the lens size and why does it matter? The lens has a 22.8 mm diameter, which increases the viewing area and simplifies locating features during inspection with the SCHWEIZER Tech‑Line loupe (SKU 4000851734NW). Is this loupe suitable for jewellery work? Yes, the loupe's optical specification and compact format make it appropriate for jewellery tasks as well as watchmaking and fine electronics inspection. How does the loupe support quality control processes? By enabling quick, reliable visual checks, the loupe helps to identify defects early in assembly and supports consistent quality assurance routines in production environments. Can the loupe replace a microscope for precision tasks? The loupe complements laboratory microscopes by providing immediate, mobile inspection capability; it is intended for fast checks rather than high‑magnification laboratory analysis. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The compact aplanatic design and integrated LED lighting deliver reliable 10× magnification and a precise 22.8 mm lens for detailed inspection tasks. Order the handheld illuminated magnifier directly via Metav Werkzeuge or ask our consultants if needed. Tech-Line CLASSIC handheld illuminated magnifier — 10× aplanatic lens, LED illumination The Tech-Line CLASSIC handheld illuminated magnifier is a compact inspection tool designed for precision checks in workshops, labs and quality control environments. 10× magnification with aplanatic optics 22.8 mm high-precision lens diameter Integrated LED for uniform illumination Ergonomic handheld design for inspection Achieve sharper inspections with aplanatic optics The aplanatic lens corrects spherical and chromatic aberrations to produce a clear, distortion-free image across the field of view. With 10× magnification and a 22.8 mm lens diameter, the optical system is optimised for fine-detail work such as PCB inspection, watchmaking and print quality checks. The corrected optics reduce the need for refocusing and rework, which supports faster throughput and more consistent measurement decisions in routine quality-control tasks. Consistent illumination for accurate evaluation Integrated LED lighting provides even, shadow-reduced illumination to reveal surface defects, print irregularities and minute markings reliably. Uniform light distribution avoids false indications caused by hotspots or shadowing, enabling more confident visual assessments and faster defect detection. The compact light source is integrated into the housing, keeping the optical axis clear and simplifying handling during prolonged inspection routines. Practical design for workshop and bench use A compact, handheld construction pairs precision optics with comfortable handling for repetitive tasks. The robust design suits everyday shop floors while the manageable lens diameter and weight aid controlled positioning over small components. This magnifier supports quality teams and technicians who require a portable, reliable inspection aid that enhances visual accuracy and reduces inspection time without complex setup. Contact Metav Werkzeuge for tailored advice on how the Tech-Line CLASSIC handheld illuminated magnifier fits specific inspection workflows and to arrange procurement through our Emmerich centre. Technical Data Article number: 4000851779NW Label: Handleuchtlupe Tech-Line CLASSIC Vergr.10x LED Linsen-D.22,8mm SCHWEIZER Manufacturer: SCHWEIZER Facts Type: Tech-Line CLASSIC Form: aplanatic Packaging unit: 1 UID: 4000851779NW Special features Magnification: 10× Lens diameter: 22.8 mm Integrated LED illumination FAQ What magnification does the magnifier offer? The Tech-Line CLASSIC handheld illuminated magnifier provides 10× magnification, suitable for detailed inspection tasks in quality control and bench work. What does aplanatic mean for practical use? Aplanatic optics reduce image distortion and chromatic aberration, so the Tech-Line CLASSIC delivers a clearer, more accurate image across the viewing area for reliable visual checks. Is the lighting suitable for shadow-sensitive inspections? Yes. The integrated LED on the Tech-Line CLASSIC produces uniform, shadow-reduced illumination that helps reveal fine defects and surface irregularities. Which applications are this magnifier designed for? The magnifier is intended for precision inspection tasks such as electronics assembly inspection, watch and jewellery work, print quality control and other fine-detail visual checks. Can the product be referenced by SKU for ordering? Orders and enquiries can reference SKU 4000851779NW for the Tech-Line CLASSIC handheld illuminated magnifier to ensure accurate identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Precision 10× magnification and a 22.8 mm lens combine to deliver clear close-up inspection in a compact, foldable format, ideal for quality checks, jewellery or workshop tasks. Order the loupe directly via Metav Werkzeuge or consult our specialists for application advice. Tech-Line folding loupe, 10× magnification, 22.8 mm – SCHWEIZER Tech-Line folding loupe for precise visual inspection and quick verification tasks in workshops, jewellery making and quality control environments. Precision 10× magnification 22.8 mm lens diameter Compact folding design Tech-Line series reliability Accurate close-up inspection that reduces rework The 10× magnification of this folding magnifier delivers a focused view of small details, making defects, engraving or solder joints easier to spot than with the naked eye. The 22.8 mm lens balances a useful field of view with fine detail resolution, so inspectors can evaluate surfaces without constant repositioning. As part of the Tech-Line, the instrument is designed to support routine quality-control workflows: efficient visual checks reduce the time spent on repeat inspections and contribute to a steadier production flow. Portable format that supports on-the-go tasks The foldable design keeps the lens protected when not in use and makes the device convenient to carry in a pocket or toolkit. Because the loupe folds flat, accessibility is immediate and handling is straightforward during quick visual verifications or longer inspection sessions. The compact format also aids traceability in mobile quality checks and on-site troubleshooting, as the instrument can be stowed safely between uses and brought out for targeted scrutiny whenever a close-up view is required. Practical construction for workshop routines Built with the demands of everyday inspection in mind, the device provides a durable, no-fuss solution for repeated use. The Tech-Line instrument offers consistent optical performance without elaborate maintenance; routine care such as a soft cloth for the lens is sufficient to maintain clarity. For small-batch production, craft work or service diagnostics, the combination of a stable magnification and a protective folding mechanism supports dependable visual assessment across many applications. For reliable, precise close-up inspection choose the SCHWEIZER Tech-Line folding loupe from Metav Werkzeuge — contact our Emmerich team for product guidance or application recommendations at info@metav-werkzeuge.com Technical data Article number: 4000851698NW Type: Tech-Line Brand: SCHWEIZER Product: Folding loupe Dimensions / Optics Magnification: 10× Lens diameter: 22.8 mm Packaging unit: 1 Features Folding loupe design Tech-Line series Compact inspection tool FAQ What magnification does the loupe provide? The loupe offers 10× magnification, suitable for close inspection of small details and surface checks. What is the lens size and how does it affect viewing? The 22.8 mm lens provides a balanced field of view and detail resolution, enabling practical inspection without frequent repositioning. Is this product suitable for workshop and jewellery use? Yes, the Tech-Line folding loupe is intended for workshop, jewellery and general quality-control tasks where reliable visual magnification is needed. How is the loupe carried and stored? The device folds to protect the lens and fits conveniently in a pocket or toolbox, offering immediate accessibility and secure storage between uses. Which SKU identifies this product? This item is listed under SKU 4000851698NW and is part of the Tech-Line folding loupe range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the combination of 6× magnification, a 22.8 mm lens and a compact folding body for precise visual checks in production and workshop environments. Order the Tech-Line folding magnifier via Metav Werkzeuge or contact their consultants for tailored advice. Tech-Line folding magnifier (6×, lens Ø 22.8 mm) — SCHWEIZER Tech-Line folding magnifier — a compact inspection tool for precise visual checks in workshops, quality control and jewellery or electronics inspection. 6× magnification for close inspection 22.8 mm optical lens diameter Compact folding design for workshop use Swiss-made optics for clear detail Precise close-up inspection that supports quality control The 6× magnification combined with a 22.8 mm lens enables detailed visual inspection of small components, solder joints and printed markings without complex equipment. Greater magnification reveals fine defects while the relatively generous lens diameter maintains a useful field of view and sufficient light intake, meaning defects can be detected more quickly and reliably. This balance of enlargement and visibility is particularly useful for incoming inspection, routine quality checks and quick on-bench verification tasks. Compact, protected design for everyday workshop use A folding construction protects the optical surface when not in use and keeps the instrument compact for pocket storage or transport. The folding magnifier is designed for frequent handling in production areas: it folds flat to avoid accidental scratching and unfolds quickly when needed. The robust housing and pocket-friendly format reduce downtime between inspections and increase tool availability at the point of work, supporting smoother workflows and faster decision-making on the shopfloor. Clear optics explained in plain terms Lens diameter affects both optical clarity and the observable area: a 22.8 mm lens gathers more light than smaller alternatives, which helps in lower ambient light conditions and reduces the need for additional illumination. Magnification increases the apparent size of features but generally narrows the visible area; at 6×, the instrument balances detail with context, so the inspected feature remains easy to locate. For users unfamiliar with optical terms, this means the pocket loupe makes small flaws easier to see while still showing a practical portion of the workpiece. Confidence through proven supply and service Sourcing through Metav brings tangible assurances: straightforward availability from Emmerich, consistent quality control and a wide network of complementary tools and measuring equipment. The compact inspection tool integrates into established quality routines and is supported by a supplier experienced in metrology and workshop supplies, which helps maintain traceability and reduces procurement complexity for businesses that require reliable, repeatable inspection methods. Contact Metav Werkzeuge today to discuss the Tech-Line folding magnifier and confirm suitability for the specific inspection tasks at your facility — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: 4000851696NW Type: Tech-Line Manufacturer: SCHWEIZER Product type: folding magnifier Item designation: Einschlaglupe Tech-Line Vergr. 6x Linsen-D.22,8mm Schweizer Packaging unit: 1 Facts Magnification: 6× Lens diameter: 22.8 mm SKU / UID: 4000851696NW Special features Folding pocket design Swiss optical components Compact for workshop and inspection use FAQ What magnification does this folding magnifier provide? The Tech-Line folding magnifier provides 6× magnification, offering a balance between enlarged detail and a usable field of view for inspection tasks. What is the lens diameter and why does it matter? The lens diameter is 22.8 mm; a larger lens gathers more light and gives a wider observable area, which improves visibility of small features under typical workshop lighting. Is the instrument suitable for electronics and jewellery inspection? Yes — the combination of 6× magnification and a 22.8 mm lens makes the magnifier suitable for electronics, jewellery, print inspection and other fine-detail applications. How is the magnifier protected during transport and storage? The folding design protects the optical surface when closed, keeping the lens safe from scratches and contaminants while stored in a pocket or tool kit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The compact combination of 10× magnification and a 22.8 mm optical lens ensures clear, close-up inspection for fine mechanical work, ideal for precise visual checks in repair and assembly. Order the item directly via Metav Werkzeuge or consult the technical team for suitability in specialised applications. Schweizer Tech-Line watchmaker's loupe — 10× magnification, 22.8 mm lens A Schweizer Tech-Line watchmaker's loupe designed for precision inspection and delicate assembly tasks in watchmaking, jewellery and micro-mechanics. 10× magnification for detailed inspection 22.8 mm glass lens for a wide viewing area Compact Tech-Line design for workshop use Built for precise, everyday visual checks Sharp optics for detailed inspection and quality control The loupe delivers 10× magnification through a 22.8 mm glass lens, enabling precise observation of small components and surface details. Such magnification allows for accurate identification of wear, misalignment and tiny defects that are otherwise difficult to perceive with the naked eye. The larger lens diameter provides a more comfortable viewing field compared with smaller inspection lenses, reducing the need for constant repositioning. In practice, this translates into fewer interruptions during inspection routines and more consistent quality control results when working on watches, small mechanisms or intricate solder joints. Practical design that supports ergonomic handling A focus on manageable dimensions and weight makes this loupe suitable for extended use on the workbench. The Tech-Line styling emphasises a compact form factor that fits naturally to the eye, helping to lower visual fatigue during repetitive tasks. Stable handling reduces shaky images and contributes to faster decision-making in repair and assembly. The device is intended as a straightforward optical aid for technicians and hobbyists who require steady, repeatable visual magnification without the complexity of integrated lighting or additional attachments. Versatile application and straightforward care This inspection lens is suited to a range of fine-detail tasks beyond traditional watchmaking, including jewellery appraisal, miniature model work and basic electronics checks. The simple optical design makes cleaning and maintenance uncomplicated; fingerprints and dust can be removed with a soft, lint-free cloth and approved lens cleaner to preserve optical clarity. The robust, uncomplicated construction means the loupe can be kept ready in a workshop environment where reliable visual aids are needed for routine inspection and finishing operations. Order the Schweizer Tech-Line watchmaker's loupe for dependable 10× inspection—contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for product details and fast, reliable delivery Technical Data SKU: 4000851736NW Product label: Uhrmacherlupe Tech-Line Vergr. 10x Linsen-Ø 22,8 mm Brand: SCHWEIZER Product type: Watchmaker's loupe Unit: 1 Facts Magnification: 10× Lens diameter: 22.8 mm UID: 4000851736NW Special features Tech-Line compact design Suitable for precision inspection and fine assembly Glass lens optics FAQ What magnification does the loupe provide? The loupe offers 10× magnification, providing detailed visual enlargement for inspection and assembly tasks. What is the lens size and why does it matter? The 22.8 mm lens delivers a wider field of view than smaller inspection lenses, improving situational awareness when examining small components. Is this loupe suitable for watchmaking and jewellery work? Yes. The Tech-Line loupe from Schweizer is intended for precision inspection in watchmaking, jewellery and similar micro-mechanical applications. How should the lens be cleaned to maintain performance? Use a soft, lint-free cloth and a suitable lens cleaner; avoid abrasive materials and store the loupe in a dust-free place when not in use. What is the product SKU and brand information? SKU: 4000851736NW — Brand: SCHWEIZER — Product type: Watchmaker's loupe Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of accurate visual inspection with the combination of 8× magnification and a 22.8 mm optical-quality lens for reliable component checks; order the loupe directly via Metav Werkzeuge or consult our advisors for application guidance. Schweizer Tech-Line watchmaker's loupe — 8×, 22.8 mm lens A Schweizer Tech‑Line watchmaker's loupe designed for precision inspection in horology and fine mechanical work, offering a compact optical solution for close visual examination 8× magnification for precise inspection 22.8 mm optical-quality lens Durable Tech‑Line housing for daily use Achieve measurable inspection results with high-magnification optics The combination of 8× magnification and a 22.8 mm lens creates a clear, enlarged view that makes fine features measurable and defects easier to identify. In practice, the higher magnification shortens inspection times by allowing quick differentiation of burrs, worn pivots and micro-scratches; this leads to fewer unnecessary disassemblies and less rework. The optical design is explained plainly so that users without specialist optics training understand that a larger effective lens diameter improves light gathering and visual comfort during extended examinations, which is crucial for detailed horological tasks. A compact tool built for repetitive workshop tasks A slim, robust housing marked as Tech‑Line ensures the instrument remains accessible in a busy bench environment while protecting the optics in transit. The compact design is intended to integrate smoothly into routine workflows: it can be positioned for steady hand inspection and is easy to handle during soldering, adjustment and assembly steps. The robust construction supports daily use and helps maintain consistent visual quality under repeated handling, contributing to dependable inspection cycles and improved process reliability. Practical handling, care and application guidance Maintenance is straightforward: using lens-safe cleaning materials preserves the optical quality of the lens and extends service life. For typical applications in repair benches and small-scale production lines, this inspection loupe supports tasks such as component alignment, thread and surface checks, and final visual quality control. If additional clarification of suitable illumination or magnification ranges is required, technical guidance is available to match the loupe’s capabilities to a specific inspection task, thereby ensuring efficient decision-making and reduced downtime. Choose the Schweizer Tech‑Line watchmaker's loupe for consistent 8× inspection performance — contact Metav Werkzeuge for expert advice and fast supply from Emmerich. Technical data Article number: 4000851735NW Name: Watchmaker's loupe Tech‑Line, 8×, lens Ø 22.8 mm, Schweizer Brand: SCHWEIZER Facts Magnification: 8× Lens diameter: 22.8 mm Series: Tech-Line Packaging unit: 1 Special features Product type: Watchmaker's loupe Compact design for bench use Optical-quality lens for detailed inspection FAQ Is the loupe suitable for watch repairs and micro-mechanics? The Schweizer Tech‑Line watchmaker's loupe (SKU 4000851735NW) is designed for horology and fine mechanical inspection and provides the magnification needed for typical repair and adjustment tasks. How should the lens be cleaned to preserve optical quality? Use lint-free cloths and lens-cleaning fluid; the Schweizer Tech‑Line loupe's optical surface benefits from gentle, regular cleaning to maintain clarity. Can the magnification level be used for soldering work on small components? The 8× magnification of the Schweizer Tech‑Line watchmaker's loupe assists precise visual alignment during delicate soldering, provided suitable local lighting is used. What distinguishes the Tech‑Line version from simpler magnifiers? The Tech‑Line designation indicates a compact, workshop-oriented design and an emphasis on durable handling combined with an optical-quality 22.8 mm lens in the Schweizer watchmaker's loupe. Is the loupe portable for mobile inspections outside the bench? Yes; the compact Tech‑Line housing makes the Schweizer watchmaker's loupe convenient for portable inspections and quick on-site checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Data inconsistency: Manufacturer details for "Euromex" are not included in the provided manufacturer mapping. Unable to generate the product description—please supply the manufacturer's full address and contact information, including street name, city, postal code, country, and any relevant phone numbers or email addresses, to ensure accurate and complete documentation of the manufacturer in our system, as this information is essential for creating a comprehensive and reliable product description that meets the necessary standards and requirements for proper identification, traceability, and verification of the manufacturer’s credentials in accordance with industry guidelines and best practices.

Take advantage of precise scale readings, a wide 22 mm field number and an integrated 10/100 eyepiece micrometer to speed up inspection workflows; order the module directly via Metav Werkzeuge or ask the consultants for integration advice. HWF eyepiece 10×/22 mm with eyepiece micrometer 10/100 and reticle — Measurement eyepiece for NexiusZoom series The HWF eyepiece 10×/22 mm with eyepiece micrometer 10/100 and reticle is a purpose-built measurement eyepiece designed for reliable, repeatable readings in inspection and quality-control tasks on NexiusZoom microscopes 10× magnification for clear readings 22 mm field number for wide view Integrated 10/100 micrometer scale Built-in reticle for alignment Precise measurements where they matter The HWF design delivers a wide field of view combined with comfortable magnification, so measurement tasks can be carried out more quickly and with fewer reframing steps. The integrated eyepiece micrometer (10/100) provides a calibrated scale in the image plane, enabling linear measurements without additional external gauges. In practical terms, this means a reduction in handling time and a clearer audit trail for inspection protocols. The layout of the scale and reticle supports repeatable positioning for comparative checks. Easy integration into existing inspection setups Compatibility with the NexiusZoom and NexiusZoom ESD series ensures straightforward retrofitting into common benchtop microscope systems. The eyepiece is a single-unit replacement that maintains optical alignment and preserves working distance, so downtime during exchange is minimal. Where system traceability is required, the micrometer scale simplifies documentation of measured values and supports cross-checks against stage micrometers or calibrated references for quality assurance. Robust design for routine workshop use Constructed for regular laboratory and workshop environments, the ocular offers stable optical performance for repetitive use. The HWF format reduces eye strain during extended inspections and the fixed 10× magnification is a practical compromise between field width and detail. The reticle supports centring and angular alignment tasks, beneficial where parts must be measured at defined orientations. For specialised applications or further calibration data, technical enquiries are welcome; Metav Werkzeuge can supply additional measurement instructions and verification options For technical integration or to discuss specification matching, contact Metav Werkzeuge — Metav Werkzeuge GmbH can advise on fitting the Euromex measurement eyepiece into NexiusZoom systems; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: NZ.6010-CM Label: HWF eyepiece 10×/22 mm with eyepiece micrometer 10/100 and reticle Type: Measurement eyepiece Manufacturer: Euromex Compatible series: NexiusZoom; NexiusZoom ESD UID: NZ.6010-CM Facts Magnification: 10× Field number: 22 mm Micrometer scale: 10/100 Number of eyepieces: 1 Features HWF eyepiece type Integrated eyepiece micrometer Built-in reticle Designed for NexiusZoom series FAQ What measurement capability does the eyepiece provide? The eyepiece includes an integrated 10/100 eyepiece micrometer that enables calibrated linear readings directly in the image plane with usable reticle marks for alignment. Is this eyepiece compatible with existing NexiusZoom microscopes? Yes, the measurement eyepiece is compatible with the NexiusZoom and NexiusZoom ESD series and is intended as a direct ocular replacement for measurement tasks. How does the HWF type improve inspection workflows? The HWF configuration offers a wide field of view and comfortable magnification, which reduces repositioning and speeds up visual inspections while maintaining measurement accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of rapid visual alignment and a wide observational field for reliable, efficient inspection workflows; order this accessory directly via Metav Werkzeuge or consult our specialists for integration advice. Euromex HWF reticle eyepiece 10×/22 mm (NZ.6010-C) — 10× magnification, 22 mm field number Euromex HWF reticle eyepiece 10×/22 mm is a wide-field ocular with an integrated crosshair, designed for precise positioning and repeatable visual measurement in industrial and laboratory microscopes 10× magnification for detailed observation 22 mm field number for a wider view Integrated crosshair for precise alignment Compatible with NexiusZoom and NexiusZoom ESD series Faster, measurable alignment with an integrated crosshair The integrated crosshair turns visual inspection into a measurable task: the reticle provides a clear reference for component positioning and quick alignment during assembly or quality checks. At 10× magnification the image remains sharp while the 22 mm field number ensures a generous field of view; this combination reduces repositioning and accelerates routine inspections. The reticle design is best described as a simple visual grid that can be used for repeatable alignment and basic comparative measurements without additional equipment, improving throughput in production environments. A wide-field design that shortens inspection time The HWF format delivers a wide field image so examples of microscopic features are easier to locate and track; this reduces time spent panning and refocusing. The eyepiece’s layout is optimised for use with modern zoom stand optics, so the observer benefits from comfortable eye relief and a stable image across the field. Compatibility with the NexiusZoom series (including ESD variants) makes the eyepiece a practical upgrade for microscope stations focused on electronics inspection, small-part assembly or routine laboratory analysis, raising operational efficiency without complex adjustments. Simple integration, robust daily performance As a single reticle eyepiece unit, the accessory is straightforward to fit and replace in compatible microscopy systems and is intended for everyday industrial use. The design supports repeatable positioning workflows and requires only standard cleaning and handling to maintain optical clarity; routine maintenance consists of lens cleaning with appropriate solvents and protection from scratches. The ocular is supplied as a single eyepiece module and was developed to be a reliable visual aid in environments where quick visual checks and repeatable alignment save time and reduce errors. For integration advice or to order this Euromex accessory for use with NexiusZoom stations, contact Metav Werkzeuge for personalised guidance and supply options Technical data Article number: NZ.6010-C Product name: HWF reticle eyepiece 10×/22 mm Manufacturer: Euromex Core specifications Magnification: 10× Field number: 22 mm Eyepiece count: 1 Compatibility & special features Fits NexiusZoom; NexiusZoom ESD HWF type (wide-field) eyepiece Integrated crosshair (reticle) FAQ Is this eyepiece compatible with NexiusZoom microscopes? Yes. The eyepiece is compatible with the NexiusZoom and NexiusZoom ESD series and can be fitted as the visual reticle module for those stands. Can the crosshair be used for simple measurements or scaling? The integrated crosshair in the Euromex HWF reticle eyepiece 10×/22 mm provides a fixed reference for alignment and comparative checks; it is suitable for repeatable positional verification though not a substitute for calibrated measurement instrumentation. How should the eyepiece be cleaned to preserve optical quality? Use lint-free cloths and recommended optical solvents; the eyepiece should be handled gently to avoid scratching the glass and stored in a dust-free environment when not in use. Is the eyepiece suitable for ESD-sensitive assemblies? Yes. Compatibility with the NexiusZoom ESD series indicates suitability for ESD-protected workstations when installed on the corresponding microscope model. Can this eyepiece replace a standard ocular for general inspection work? The reticle eyepiece serves both as a visual ocular and as an alignment aid; it is well suited to general inspection tasks where an integrated reference mark adds value. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Data inconsistency: the manufacturer "Euromex" is not listed in the required manufacturer directory, so the product description cannot be generated, which means that without the necessary inclusion of this manufacturer in the directory, it becomes impossible to retrieve or verify the relevant details needed to create an accurate and comprehensive product description, potentially leading to issues in cataloguing, inventory management, or customer-facing documentation, as the absence of this information disrupts the standard process of ensuring that all products are properly accounted for and described according to the established guidelines and requirements of the system in use.

Take advantage of the combination of built-in 2× magnification and standard 23.2 mm tube compatibility for precise, reproducible imaging; order the AE.5130 directly via Metav Werkzeuge or consult our specialists for integration advice. AE.5130 Universal SLR Adapter — SLR camera adapter with built-in 2× lens (Euromex) AE.5130 is a universal SLR camera adapter designed to mount digital SLRs to standard 23.2 mm microscope tubes; the unit includes a built-in 2× lens and requires a T2 adapter for camera attachment. Built-in 2× lens for image magnification Fits standard 23.2 mm eyepiece tubes Requires T2 adapter for camera connection Compatible with AE.5025 and AE.5040 accessories Double the image scale for clearer documentation The integrated 2× magnification lens increases the image projection onto the camera sensor, enabling finer detail capture without changing the microscope objective. For documentation and image analysis this results in higher apparent resolution on the acquired files, which is particularly useful when working with sensors that are smaller than the optical image circle. The optical element is optimised for coupling between microscope optics and SLR sensors, offering a balance between field of view and detail enhancement while maintaining alignment with the optical axis. Straightforward mounting to standard eyepiece tubes Engineered for the common 23.2 mm standard, the adapter allows reliable mechanical integration with most stereo and teaching microscopes that accept standard tubes. The camera interface itself requires a T2 adapter (not included), a widely used threaded solution for camera bodies; this separation keeps the adapter universally applicable across camera makes. When retrofitting a camera, verify the presence of the T2 thread or select the correct T2 ring for the specific SLR body to ensure secure, repeatable mounting and correct flange focal distance. Versatile accessory for laboratory and teaching environments As a compact imaging accessory, the adapter serves laboratories, inspection stations and educational settings that need a cost-effective way to capture microscope images with consumer or professional SLR cameras. Compatibility with related items such as AE.5025 and AE.5040 allows modular setups: combine components to suit specific sensor sizes or to adapt to different observation tasks. The universal design reduces the need for multiple bespoke adapters, streamlining inventory and simplifying procurement for technical departments and instrument managers. Contact Metav Werkzeuge for product AE.5130 — our consultants can confirm fit with existing microscopes and advise on the correct T2 ring or accessory combinations to ensure optimal imaging results. Technical data Article number: AE.5130 Manufacturer: Euromex Product type: SLR camera adapter Core specifications Lens factor: 2× Tube connection: 23.2 mm Camera mount: T2 adapter required Special features Built-in 2× lens Universal SLR adapter design Compatible with AE.5025; AE.5040 FAQ How does the built-in 2× lens change the captured image? The built-in lens in AE.5130 doubles the projection size on the camera sensor, improving the level of detail in images without changing microscope objectives, which benefits documentation and image analysis workflows. Will this adapter fit microscopes with a 23.2 mm eyepiece tube? Yes, the adapter is made for standard 23.2 mm tubes and will seat on microscopes with that tube diameter; confirm the tube standard on the instrument before purchase. Which camera bodies are compatible with this adapter? Any SLR camera that can be fitted with a T2 adapter is compatible; AE.5130 requires a T2 ring specific to the camera make to achieve the correct flange focal distance. Can the adapter be used with other accessories? AE.5130 is compatible with accessories AE.5025 and AE.5040, enabling modular configurations for different sensor sizes or imaging requirements. Is a T2 adapter included with the AE.5130? Product data specifies that a T2 adapter is required; the T2 adapter is not listed as included with the AE.5130 and should be provided separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise measuring and integrated reticle functionality to streamline documentation and repeatable inspections in the workshop; order the eyepiece directly via Metav Werkzeuge or consult the Metav team for compatibility advice. HWF eyepiece 10×/23 mm with reticle — Euromex reticle eyepiece HWF eyepiece 10×/23 mm with reticle for NexiusZoom EVO provides a wide, clear field and an integrated crosshair for precise alignment and measurement tasks in laboratory and production settings. 10× magnification for detailed observation 23 mm field number for wide viewing area Integrated reticle for precise alignment Compatible with NexiusZoom EVO series Maximise image area for faster inspection The wide 23 mm field number delivers a visibly larger viewing area than standard eyepieces, reducing the need to reposition samples during routine checks. A broader field shortens inspection cycles and increases throughput, especially where repeated visual comparisons are required. The HWF design preserves edge sharpness across the field, so the optical system presents a consistently usable image for longer, enabling quicker documentation of production tolerances with less operator fatigue. Precise alignment and measurement with an integrated reticle An integrated reticle supplies a reliable visual reference for locating features and aligning components under magnification. When used together with calibrated stage scales or measurement software, the reticle supports repeatable positional documentation and improves traceability in quality control procedures. The reticle is built into the optical path, which ensures stability and reduces parallax—important when small shifts would otherwise affect measurement reliability during serial inspections. Robust optical compatibility for NexiusZoom systems Engineered for compatibility with the NexiusZoom EVO series, the eyepiece fits into modular imaging workflows where interchangeability and consistent performance matter. The HWF ocular maintains the intended working distance and field geometry of the zoom system, so optical scaling and calibration remain predictable after swapping eyepieces. This compatibility lowers setup time for different inspection tasks and keeps calibration routines straightforward for technicians and operators. Practical benefits for workshops and laboratories Beyond optics, this ocular supports routine operational efficiency: fewer sample movements, faster visual decisions and easier alignment of fixtures. The combination of 10× magnification and a wide field offers a balance between detail resolution and contextual overview, suited to assembly inspection, metallography pre-checks and component sorting. The optical accessory is compact and simple to integrate, making it a pragmatic choice for busy benches where instrument uptime and repeatable results are priorities. For tailored advice on integrating this Euromex HWF eyepiece into existing NexiusZoom EVO systems, contact Metav Werkzeuge for expert consultation and direct supply from Emmerich Technical data Article number: NZ.6210-C Label: HWF eyepiece 10×/23 mm with reticle for NexiusZoom EVO Manufacturer: Euromex Core specifications Magnification: 10× Field number: 23 mm Number of eyepieces: 1 SKU / UID: NZ.6210-C Features and compatibility Eyepiece type: HWF (wide-field) Reticle: integrated crosshair present Product type: reticle eyepiece Compatible with: NexiusZoom EVO series FAQ What magnification does this eyepiece provide? The eyepiece delivers 10× magnification, which offers a useful compromise between detailed resolution and a broad overview for inspection tasks. Can the integrated reticle be used for measurements? The integrated reticle in this Euromex reticle eyepiece is suitable for alignment and comparative measurement when used alongside calibrated stage scales or imaging calibration routines. Is the eyepiece compatible with all NexiusZoom EVO microscopes? This HWF eyepiece is designed for compatibility with the NexiusZoom EVO series; confirm individual instrument fittings if specialised adapters or non-standard configurations are present. How does the 23 mm field number benefit inspection work? A 23 mm field number increases the visible field, reducing sample repositioning and speeding up visual inspections while maintaining edge sharpness across the view. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Taking advantage of 10× magnification combined with a 23 mm field number ensures comfortable, extended observation without constant refocusing; order the eyepiece pair directly via Metav Werkzeuge or consult our experts for compatibility advice. Pair of HWF eyepieces 10×/23 mm for NexiusZoom EVO — Euromex eyepiece pair with wide field and high eyepoint Pair of HWF eyepieces 10×/23 mm for NexiusZoom EVO provides a generous field of view and comfortable eye relief for prolonged inspection tasks on compatible NexiusZoom EVO microscopes. HWF optics for wide useful field 10× magnification for detailed inspection 23 mm field number for expansive view Designed for NexiusZoom EVO compatibility Enhanced observation through wide-field optics These eyepieces combine HWF optical design with a 23 mm field number, delivering a noticeably larger usable image circle compared with standard oculars. The result is an increased apparent field of view that allows operators to track specimens or assemblies with fewer adjustments. For inspection and assembly work where component layout and rapid orientation matter, the 10× magnification balances detail with situational awareness, making fine structures visible without the narrow tunnel effect often associated with higher-power oculars. This combination supports faster visual scanning and reduces the need for frequent repositioning. Comfortable design for longer sessions The eyepiece geometry is optimised for extended use: high eyepoint and a generous viewing aperture reduce eye strain and make it easier to maintain a correct viewing posture even with corrective spectacles. The HWF eyepiece concept emphasises ergonomic viewing and stable image projection, which benefits technicians and quality controllers during lengthy measurement or inspection routines. The comfortable eye relief and consistent image brightness contribute to reliable, repeatable visual assessments in routine production and laboratory environments. Compatibility and practical integration Engineered for the NexiusZoom EVO series, the optical pair fits seamlessly into the binocular tube or ocular mounts specified for that platform, ensuring mechanical and optical alignment without compromise. Compatibility with the zoom head keeps the optical axis and parfocal settings intact, which minimises recalibration when swapping oculars. The design supports typical laboratory workflows, where quick changes between magnifications and consistent image geometry are essential for traceable inspections and documentation. Suitable applications and user benefits These eyepieces are suitable for microscopy tasks in education, quality control and light industrial inspection where a wide field and comfortable viewing are priorities. The configuration provides a pragmatic balance between magnification and overview, supporting tasks such as component inspection, sample orientation and quick visual checks. By choosing a wide-field 10× solution, operators gain improved situational context while retaining sufficient detail for many routine measurement and inspection tasks. For tailored advice on integrating the eyepiece pair into existing NexiusZoom EVO systems, contact Metav Werkzeuge for product guidance and ordering support via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: NZ.6210 Label: Pair of HWF eyepieces 10×/23 mm for NexiusZoom EVO Manufacturer: Euromex Facts Magnification: 10× Field number: 23 mm Eyepieces: 2 Special features Eyepiece type: HWF Compatible series: NexiusZoom EVO Cross-selling SKUs: NZ.1702-A;NZ.1702-AP;NZ.1702-B;NZ.1702-M;NZ.1702-P;NZ.1702-PG;NZ.1702-S;NZ.1702-U;NZ.1703-A;NZ.1703-AP;NZ.1703-B;NZ.1703-M;NZ.1703-P;NZ.1703-PG;NZ.1703-S;NZ.1703-U FAQ Are these eyepieces compatible with all NexiusZoom EVO models? Compatibility is specified for the NexiusZoom EVO series; the eyepiece pair NZ.6210 by Euromex fits the standard ocular mounts used across that series. What viewing benefits does the 23 mm field number provide? A 23 mm field number increases the apparent field of view, allowing broader specimen context to be seen at 10× magnification, which is especially useful during inspection and orientation tasks. Can the eyepieces be used with corrective spectacles? Yes, the HWF design offers extended eye relief and a high eyepoint, making them suitable for users who wear glasses during inspection work. Is the optical performance suitable for quality-control environments? The optical characteristics of this Euromex eyepiece pair support clear, stable imaging at 10×, making them appropriate for routine quality-control inspections where both overview and detail are required. How should the eyepieces be cleaned to avoid damage? Clean gently using lens tissue or a soft lint-free cloth and appropriate optical cleaner; avoid abrasive materials to preserve the coatings and optical surfaces of the NZ.6210 eyepieces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise imaging, the C‑mount standard and a 0.5× optical reduction that widens the captured field while maintaining alignment and stability; order the Adapter M503.252.1 directly via Metav Werkzeuge or ask our consultants if needed. Adapter M503.252.1 — CCD adapter for stereo microscopes, C‑mount 25.4 mm, 0.5× A Adapter M503.252.1 engineered to link a stereo microscope trinocular port to a digital camera, enabling consistent image capture and expanded field coverage for laboratory and inspection workflows. CCD adapter for digital camera integration C‑mount connection, 25.4 mm diameter 0.5× reduction for wider field of view Robust construction, precise optical alignment Faster documentation with standard camera interfaces The CCD adapter provides a straightforward mechanical and optical interface between a trinocular microscope port and a C‑mount camera, converting the microscope’s exit pupil to a camera‑friendly image circle. The integrated 0.5× reduction lowers overall magnification to increase the field of view, which speeds up specimen surveys and reduces the need for repeated repositioning. For routine imaging tasks in quality control or teaching, this configuration shortens inspection cycles and improves throughput while preserving sufficient image detail for analysis. Stable optical alignment for repeatable results Mechanical stability is critical when photographing at high magnification; the adapter is designed to maintain precise optical alignment across repeated attachments. The construction minimises mechanical play and preserves the optical axis between the microscope and the digital camera, reducing vignetting and ensuring consistent exposure framing. Such repeatability supports traceable documentation and eases comparison between successive captures, a practical advantage for assembly‑line inspection or documented research where uniform image geometry is required. Practical use in laboratory and inspection environments Integration of a dedicated camera adapter simplifies the transition from visual observation to digital imaging. The reduction optics help capture larger areas of a specimen without changing objectives, which benefits users who alternate between overview shots and detail inspection. Compatibility with common C‑mount cameras makes the adapter a flexible choice for educational labs, industrial inspection benches and R&D setups that require reliable image capture without complex custom coupling. For precise imaging solutions and to discuss compatibility with existing microscopy equipment, contact Metav Werkzeuge to arrange supply or technical consultation for the Adapter M503.252.1 — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M503.252.1 GTIN: 4054469145327 ECLASS: 32130102 Tariff number: 90119090 Facts Weight: 6.15 kg Magnification: 0.5× Connection: C‑mount (25.4 mm) Type: C0.5-S-c Special features CCD adapter For attachment between stereo microscope and digital camera Compact optical reduction module Designed for stable optical alignment FAQ What cameras are compatible with this adapter? The Adapter M503.252.1 is designed for cameras with a standard C‑mount thread (25.4 mm) and will accept most industrial and scientific C‑mount CCD or CMOS cameras. Does the adapter change the microscope magnification? Yes, the built‑in 0.5× reduction decreases the effective magnification at the camera port, increasing the captured field of view for broader specimen coverage. Is this adapter suitable for routine laboratory documentation? The CCD adapter from Metav IndustryLine is intended for reliable imaging and is well suited to routine documentation tasks in laboratories and inspection environments. How does the adapter affect image alignment and vignetting? The adapter is engineered to maintain optical alignment and reduce vignetting when correctly matched to the microscope exit pupil and a C‑mount camera. What is the article number for ordering and reference? Reference Article number M503.252.1 (SKU M503.252.1) when enquiring or ordering to ensure the correct CCD adapter is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the 1.5× magnification and the standard C‑mount (25.4 mm) interface to enlarge image detail while retaining a secure mechanical fit; this adapter offers straightforward integration into inspection and imaging assemblies. Order the unit directly via Metav Werkzeuge or consult our specialists for configuration advice. DH‑C1.5 CCD Adapter — 1.5× magnification, C‑mount (25.4 mm) by Metav IndustryLine The DH‑C1.5 CCD Adapter provides a compact optical interface for connecting a CCD camera to inspection optics and measuring equipment, optimised for enhanced image scale and stable mechanical coupling. 1.5× magnification for increased image detail Standard C‑mount (25.4 mm) for universal camera fit Robust mechanical interface for reproducible positioning Compatible with measuring head MZDH0850 Greater image detail with a compact optical interface The adapter multiplies incoming image size by 1.5×, making small features easier to inspect without changing the primary objective. The listed C‑mount thread (25.4 mm) is an established camera standard, ensuring straightforward attachment to most industry CCD cameras and simplifying inventory management. By increasing the image scale at the sensor, the interface reduces the need for higher‑magnification optics elsewhere in the system, which can lower total system cost while preserving optical resolution and measurement reliability. Fast, secure installation for repeatable inspections A standardised mount means rapid mechanical coupling and consistent alignment between camera and optics. The adapter is designed to minimise axial play and wobble, supporting reproducible alignment across repeated setups and production cycles. Integration time is reduced because no bespoke fittings are required for standard C‑mount cameras, and the confirmed compatibility with the MZDH0850 measuring head makes the adapter well suited to retrofit tasks and modular inspection rigs used in routine quality control. Built for industrial imaging and metrology workflows As part of the Metav IndustryLine offering, this optical interface is intended for inspection, documentation and measurement tasks where stable imaging and predictable magnification are priorities. The compact form factor keeps optical paths short, which helps to avoid additional aberrations and simplifies focus adjustments. For production and laboratory contexts where throughput and traceability matter, the adapter supports consistent image capture and helps maintain inspection cadence with minimal adjustment between jobs. Choose the DH‑C1.5 CCD Adapter from Metav Werkzeuge for reliable magnification and plug‑and‑play integration into existing C‑mount camera systems; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and ordering guidance. Technical data SKU: M503.251.3 Type: DH‑C1.5 Connection: C‑mount, 25.4 mm Magnification: 1.5× GTIN/EAN: 4054469145303 Customs tariff number: 90119090 eClass: 34551207 Facts Category: Optik Suitable for measuring head: MZDH0850 Story trigger: optik Manufacturer name (raw): Metav IndustryLine Special features Designed for CCD camera attachment Compact optical interface for inspection setups Standardised mechanical thread for easy replacement FAQ What cameras fit the adapter? The DH‑C1.5 adapter uses a standard C‑mount (25.4 mm) thread, so it is compatible with the majority of CCD cameras that accept C‑mount interfaces. How much does the adapter magnify the image? The unit provides a fixed 1.5× magnification, enlarging the image projected onto the camera sensor for improved detail recognition during inspection. Can this adapter be used with existing measuring heads? Yes — the adapter is specified as compatible with the MZDH0850 measuring head, enabling integration into established measurement fixtures. Will the adapter affect optical quality? The adapter is designed to preserve optical throughput and minimise additional aberrations; correct use maintains measurement fidelity while increasing image scale. What identifiers are useful for ordering or stock control? Relevant identifiers include SKU M503.251.3 and GTIN 4054469145303, which support clear order and inventory handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, C‑mount 25.4 mm interface and a purpose-built CCD adapter to integrate camera imaging into existing stereo microscope setups with minimal adjustment; order directly via Metav Werkzeuge or consult our specialists for matching camera and sensor recommendations. Adapter M503.252.2 – C‑mount CCD adapter for trinocular stereo microscopes (1× magnification) — Metav IndustryLine The Adapter M503.252.2 provides a direct connection between a trinocular stereo microscope head and a C‑mount digital camera, enabling reliable documentation and image capture for inspection, teaching and routine laboratory work. C‑mount interface, 25.4 mm 1× optical magnification CCD camera adapter for trinocular heads Rapid camera integration for routine documentation This compact imaging interface removes the need for bespoke optical assemblies by offering a standardized C‑mount connection and a true 1× magnification optical path. The result is predictable image scaling and repeatable frame sizes when coupling industrial CCD or scientific cameras to a trinocular head. As an adapter engineered for camera-based documentation, it preserves the microscope’s optical alignment and ensures that field of view and focus behaviour remain consistent with eyepiece observations, which reduces setup time and streamlines inspection workflows. The construction emphasises mechanical precision and stable seating to avoid sensor misalignment during repeated handling. Stable imaging and preserved optical performance The mechanical interface is designed to maintain parfocality and minimise tilt, which benefits tasks that require exacting comparisons or image stitching. By using a dedicated CCD adapter with a defined 25.4 mm C‑mount diameter, the optical path is kept simple and free of unnecessary glass elements that can introduce aberrations. This conserves contrast and sharpness for measurement and documentation tasks, while the solid mount reduces the risk of movement during exposure. For laboratories and production lines where consistent image quality is essential, the adapter delivers a pragmatic combination of stability and optical fidelity that supports traceable visual records. Broad compatibility and workflow advantages Compatibility with standard C‑mount cameras makes the unit suitable for many industrial and scientific imaging sensors without requiring complex optical calculations. Because the adapter maintains a 1× factor, image scale can be calculated directly from the microscope objective and the camera sensor size, simplifying calibration for measurement or metrology tasks. Integration is straightforward: the adapter mates to the trinocular port and accepts a camera with a matching thread; if larger sensors or non‑C‑mount bodies are used, simple camera‑side adaptors may be employed. This standardised approach reduces procurement complexity and supports rapid deployment across multiple microscopes or inspection stations. Contact Metav Werkzeuge for specialist advice on integrating the Metav IndustryLine Adapter M503.252.2 into existing imaging setups and for assistance with camera compatibility from our Emmerich location Technical data Article number: M503.252.2 GTIN: 4054469145334 Type: C1.0-S-C Eclass: 32130102 SKU: M503.252.2 Numbers / Key figures Weight: 6.15 kg Connection: C‑mount 25.4 mm Magnification: 1× Tariff number: 90119090 Features / Compatibility CCD adapter For trinocular stereo microscopes Compatible with C‑mount cameras Brand: Metav IndustryLine FAQ What cameras are compatible with this adapter? The adapter fits cameras with a standard C‑mount thread; most industrial CCD and CMOS cameras with a 1‑inch or smaller sensor can be used directly with the Adapter M503.252.2 from Metav IndustryLine. Does the adapter change the microscope magnification? No, the adapter provides a 1× optical path so the microscope’s native objective magnification is preserved at the camera sensor; this simplifies scale calculation for documentation and measurement. Will the adapter cause vignetting on larger sensors? Vignetting depends on the microscope objective and the camera sensor size; the Adapter M503.252.2 maintains a standard C‑mount image circle, so very large sensors may show vignetting and should be checked before deployment. Is the mechanical connection stable for repeated use? Yes, the adapter is designed for a secure, repeatable connection to the trinocular head and the camera, maintaining alignment during routine handling and reducing the need for frequent recalibration. Can this adapter be used with DSLRs or mirrorless cameras? The adapter is intended for C‑mount cameras; DSLRs and many mirrorless bodies require an additional C‑mount to camera‑mount adapter or a relay lens to match flange focal distance and sensor coverage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the compact design and precise optical scaling to integrate reliable camera coupling into inspection systems; the combination of a C‑mount, 25.4 mm thread and 0.5× magnification ensures consistent image geometry and straightforward sensor matching — order the adapter directly via Metav Werkzeuge or consult our specialists for system integration. CCD Adapter DH-C0.5 — C‑mount optical coupling, 0.5× magnification (Metav IndustryLine) A CCD Adapter for mounting C‑mount cameras to inspection optics, reducing image scale by half for improved sensor coverage in laboratory and workshop metrology. C‑mount, 25.4 mm thread 0.5× fixed magnification Designed for CCD camera integration Compact optical adapter for microscopes Improved image matching for camera-based inspection The DH‑C0.5 provides a stable and predictable optical interface so machine vision and inspection cameras achieve a consistent field of view. With a C‑mount thread sized at 25.4 mm, the adapter couples directly to standard CCD housings and many industrial lenses, while the 0.5× magnification halves the image scale to increase the covered area on a sensor without lowering resolution excessively. This reduction is beneficial where larger area capture is required for quality control or when matching a higher-resolution sensor to an existing optical path. The design reduces the need for complex lens changes and helps maintain repeatable measurement geometry across inspection runs, which supports faster setup times and fewer calibration cycles. Mechanical stability and system reliability Built for workshop and laboratory use, the optical coupling emphasises rigidity and compactness to limit misalignment and optical aberrations during handling. The adapter’s compact form reduces leverage on the camera mount, lowering the risk of vignetting or tilt that can compromise image-centred measurements. Where repeatable imaging is essential, the adapter’s fixed optical reduction gives predictable scaling, simplifying software calibration and measurement scripts. Integration into existing setups is straightforward, and compatibility with standard mounting threads reduces the requirement for bespoke brackets, helping to keep installation effort and machine downtime to a minimum. Practical benefits for metrology and inspection workflows By standardising the camera‑to‑optics interface, the adapter supports consistent image results across different cameras and lenses, which improves process control and traceability in inspection tasks. The component is particularly suited to optical inspection, documentation and simple machine‑vision tasks where stable scaling and ease of integration outweigh the need for variable optics. Compatibility notes include suitability for use with the caliper accessory MZDH0850 where mechanical integration is required. Moreover, choosing components from Metav IndustryLine aligns with a supply chain that emphasises reproducible quality and dependable European distribution, helping workshops and small manufacturers access precise tools without undue procurement complexity. Contact Metav Werkzeuge in Emmerich for integration advice and reference M503.251.1 when enquiring about the DH‑C0.5 adapter and its use in inspection systems Technical Data Article number: M503.251.1 GTIN: 4054469145280 ECLASS: 34551207 Facts Type: DH‑C0.5 Magnification: 0.5× Mount: C‑mount, 25.4 mm Tariff number: 90119090 Special features Suitable for CCD camera integration Categories: Optik Compatible with caliper MZDH0850 FAQ What cameras and lenses fit this adapter? The adapter fits cameras with a standard C‑mount and pairs with C‑mount lenses; the DH‑C0.5 was designed for CCD camera integration and connects via a 25.4 mm thread. How does the 0.5× magnification affect measurement imaging? Halving the image scale increases the observable field per frame, which helps cover larger components while retaining sensor resolution; the fixed reduction simplifies calibration for reproducible measurements. Is the adapter compatible with microscopes and inspection stands? Yes — the compact construction allows use on microscopes and similar inspection optics where a reduction coupling is required to match camera sensor size to the optical image. Which product reference should be quoted for ordering or technical enquiries? Please refer to SKU M503.251.1 (DH‑C0.5) when contacting Metav Werkzeuge for compatibility details or system integration advice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise visual assessment and robust construction: the combination of LED illumination, a tempered Ø30 mm lens and a compact 0–25 mm measuring range supports fast, reliable thread inspections in production and laboratory environments. Order the Precision Thread Counter directly via Metav Werkzeuge or ask our consultants if needed. Precision Thread Counter M503.123 — 10 diopter, temperate Ø30 mm lens (Metav IndustryLine) The Precision Thread Counter M503.123 is an optical inspection instrument designed for rapid visual counting and assessment of threads, yarns and fine filaments in quality control and textile laboratories. LED illumination for improved visibility 10 diopter for precise focus control Tempered Ø30 mm lens for crisp imaging Robust metal housing, only 0.1 kg Faster, more reliable thread inspection for production control The instrument delivers a measured visual workflow by combining LED illumination with a tempered Ø30 mm lens, which increases contrast and reduces reflections for clearer thread definition. The 10 diopter eyepiece allows precise focus adjustment so different operators reach the same visual result quickly, reducing interpretation variance. With a 0–25 mm measuring range, the device is aimed at small to medium textile samples and compact filament bundles where detail and repeatability matter most. Built to perform in the workshop and the laboratory A metal housing ensures mechanical resilience and stable alignment during handheld use; at just 0.1 kg, the unit remains easy to manoeuvre for repetitive inspections without operator fatigue. The combination of durable construction and compact optics supports consistent image quality over extended use, while the hardened lens surface resists wear. This balance of portability and robustness makes the tool suitable both at the bench and on the production line for spot checks and routine quality sampling. Practical benefits for quality assurance and traceability The optical configuration supports quick decisions during inline checks and offline sampling: clearer threads mean fewer ambiguous readings and faster acceptance or corrective actions. The device is supplied with a clear SKU (M503.123) and GTIN for inventory and traceability, simplifying integration into existing quality processes. As part of the Metav IndustryLine range, the instrument benefits from a reliable supply chain and the product documentation needed for standardised inspection routines. For textile laboratories and production-quality teams seeking consistent, repeatable visual counts, choose the M503.123 from Metav IndustryLine — contact Metav Werkzeuge for product advice and local delivery from Emmerich. Technical data Article number: M503.123 GTIN: 4054469144566 Customs tariff number: 90138090 Facts Measuring range: 0–25 mm Lens diameter: Ø30 mm Diopter: 10 Weight: 0.1 kg Dimensions: 55 x 38 x 50 mm Special features LED illumination Tempered (vergütet) lens surface Metal housing Category: Optical inspection instrument SKU: M503.123 FAQ What is the M503.123 best used for? The M503.123 precision thread counter is intended for visual counting and inspection of threads, yarns and fine filaments in textile quality control and laboratory sampling. How does the diopter help with inspections? The 10 diopter adjustment on the device permits precise focusing for different operators and sample distances, improving repeatability of visual readings with the M503.123. Can the instrument be used on non-textile samples? Yes, the optical configuration and tempered Ø30 mm lens make it suitable for any small‑scale filament or fine-detail inspection within the 0–25 mm range where enhanced contrast is required. Is the device robust enough for production environments? The metal housing and hardened lens surface are specified to withstand routine workshop handling while remaining lightweight for handheld use. How is the product identified for stock and quality records? The unit is supplied with SKU M503.123 and GTIN 4054469144566 for inventory control and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of hard-chrome graduation, compact Ø25/2.5 mm scale and dual macro/micro readability for reliable routine measurements; order the measuring scale directly via Metav Werkzeuge or consult our specialists for technical guidance. Tech-Line Measuring Scale Ø25/2.5 mm, Duo-Scale 1 – Standard (SCHWEIZER) The Tech-Line Measuring Scale Ø25/2.5 mm, Duo-Scale 1 is a compact graduated scale designed for precise workshop measurements, combining dual macro and micro graduations with a scratch-resistant glass-disc construction. Hard-chrome graduation under glass Dual macro and micro graduations Scale diameter 25 / 2.5 mm Glass discs with protective plastic ring Precise graduations for consistent measurement results The scale provides two clearly spaced graduations—a macro scale for quick alignment and a micro scale for fine measurement—making it suitable for calibration tasks and repeat checks. The graduation is applied in hard chrome to the underside of the glass discs, which ensures high contrast while protecting the marking from abrasion. This configuration reduces reading error and supports faster quality checks on production lines or in a metrology bench, delivering measurable efficiency gains when compared with ungraduated or single-scale alternatives. Robust design that protects the scale and extends service life Constructed with glass scales seated in a plastic ring, the device prevents direct contact between the measuring faces and peripheral components, which reduces the risk of scratches and preserves legibility over time. The protected marking method and compact Ø25/2.5 mm format make the unit resistant to everyday workshop wear while remaining easy to handle. This combination of durability and compactness minimises replacement frequency and supports predictable maintenance cycles, contributing to lower total cost of ownership for routine measuring equipment. Easy integration and practical handling in the workshop The compact diameter and clear dual graduations facilitate installation into existing fixtures or measuring setups without major adaptations. Readability is improved by the protected contrast of the hard-chrome markings, so operators can perform faster readings with fewer re-measures. Documentation and traceable routine checks become more straightforward, since the graduated scale supports both quick visual checks and finer adjustments, enhancing throughput and reducing downtime for inspection tasks. Choose the SCHWEIZER Tech-Line measuring scale for dependable, low-maintenance graduations and contact Metav Werkzeuge for tailored procurement advice or specifications from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 4000851705NW Type: Tech-Line Label: Messskala Tech-Line Skala-D.25/2,5mm Duo-Skala 1-Standard SCHWEIZER Version: Duo-Scale 1 - Standard Manufacturer: SCHWEIZER Product type: Measuring scale Packaging unit: 1 Core data Scale diameter: 25 / 2.5 mm Number of scales: 2 Special features Hard-chrome graduation on underside of glass discs Two scales (macro scale, micro scale) Glass discs with plastic ring Protection against scratching FAQ How are the graduations applied to the scale? The graduations are applied in hard chrome to the underside of the glass discs, so the markings remain visible while being protected from wear on the measuring face of the Tech-Line measuring scale. What does Duo-Scale mean in practical terms? Duo-Scale indicates the presence of two separate graduations—a macro scale for rapid alignment and a micro scale for fine measurement—enabling both quick checks and precise adjustments with the same measuring component. Is the scale suitable for workshop use where surfaces may contact it? Yes, the glass discs are fitted with a protective plastic ring and the graduation is located beneath the glass, which together provide effective scratch protection during routine handling. Can the compact Ø25/2.5 mm format be mounted into existing fixtures? The compact diameter and standardised graduations facilitate straightforward integration into fixtures and measuring setups that accept small-diameter graduated elements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com