Mikroskopie für Profis, Fortgeschrittene und Einsteiger

Take advantage of a hard‑chrome graduation and a dual macro/micro scale for rapid, reliable readings; the glass scales with a protective plastic ring reduce the risk of scratching and extend service life. Order directly via Metav Werkzeuge or consult the team for technical advice. Tech-Line Scale D.25/2.5 mm Duo-Scale 2 — precision measuring scale by SCHWEIZER, hard‑chrome graduation The Tech-Line Scale D.25/2.5 mm Duo-Scale 2 is a compact measuring scale designed for precision instruments, combining coarse and fine graduations for quick alignment and accurate fine reading in workshop and metrology environments Hard-chrome graduation for wear resistance Dual graduations: macro and micro scale Glass scales with protective plastic ring Faster, clearer readings through dual graduations The dual scale design delivers both a macro scale for quick positioning and a micro scale for precise fine measurement, allowing processes to be paced efficiently without sacrificing accuracy. The graduation is formed from hard chrome, which is applied beneath the hard‑glass plates to enhance contrast and resist wear; this means the scale remains readable after prolonged use. The specified scale Ø 25/2.5 mm provides compact, high‑resolution markings that are suitable for dial indicators, optical comparators and compact measurement fixtures. With the coarse and fine markings combined on one component, setup times are reduced and cycle reliability is improved. Robust materials that cut maintenance and protect accuracy The scale's glass scales are mounted with a plastic ring that acts as a buffer and prevents direct impact or abrasion to the glass surface; as a result, scratch protection is increased and recalibration intervals can be extended. Because the graduation is hard‑chrome, corrosion resistance and surface hardness are improved, which in turn supports long‑term dimensional stability. The construction is conceived for workshop and shop‑floor conditions, where tools are exposed to handling and routine wear; maintenance effort is therefore reduced and measurement traceability can be upheld with less downtime. Compact integration for professional workflows Designed as a retrofit or original‑equipment component, the scale fits compact measurement assemblies where space and clarity are both critical. The compact diameter and the duo‑scale format make it straightforward to integrate into existing reading heads or bespoke mounts, while preserving a professional visual contrast for fast operator interpretation. The component is particularly suited to quality departments, small‑series production and precision workshops that require dependable, repeatable readings without complex electronic systems. For reliable, workshop‑ready measuring equipment choose SCHWEIZER Tech‑Line components — contact Metav Werkzeuge for tailored advice and dependable dispatch from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 4000851706NW SKU: 4000851706NW Brand: SCHWEIZER Type: Tech-Line Product type: Measuring scale Version: Duo-Skala 2 Packaging unit: 1 Facts Scale diameter: 25/2.5 mm Graduations: dual (macro and micro) Material of graduation: hard chrome Mount: glass scales with plastic ring Special features Graduation applied under hard glass plates Two scales (macro scale, micro scale) Glass scales with protective plastic ring Scratch protection designed to reduce surface damage FAQ How does the duo-scale improve measurement speed and accuracy? The duo‑scale combines coarse and fine graduations so positioning can be performed quickly on the macro scale, with the micro scale used for the final, accurate reading; the Tech‑Line Scale D.25/2.5 mm Duo‑Scale 2 by SCHWEIZER was developed for this workflow. Is the graduation resistant to wear and corrosion? Yes, the graduation is hard‑chrome and placed beneath hard glass plates, which increases surface hardness and corrosion resistance and helps maintain legibility over time. Can the scale be used in a production workshop environment? The glass scales are protected by a plastic ring to reduce scratching and the design was conceived for routine workshop handling, making it suitable for shop‑floor use and industrial inspection setups. What is the exact model identifier for ordering or reference? The component is listed as Tech‑Line Scale D.25/2.5 mm Duo‑Scale 2, SKU 4000851706NW, manufactured by SCHWEIZER. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of 10× magnification, a coated Ø30 mm lens and integrated LED illumination for faster, more reliable textile inspections; the robust metal housing keeps the instrument serviceable in workshop conditions. Order the Thread Counter directly via Metav Werkzeuge or ask our consultants if needed. Thread Counter M503.124 — 10× magnifier with coated Ø30 mm lens and LED illumination (Metav IndustryLine) A compact Thread Counter M503.124 designed for textile inspection and laboratory checks, combining a coated 30 mm lens with integrated lighting for clear, repeatable thread counts. 10× magnification for precise thread counting Coated Ø30 mm lens for sharp contrast Metal housing for workshop durability Integrated LED for even illumination High-precision visual inspection that speeds up decisions The instrument delivers 10× magnification through a coated Ø30 mm lens, offering a clear field for counting and assessing individual threads or weave structures. The optical coating reduces stray reflections and increases contrast, which makes thread boundaries easier to discern even on mixed-colour fabrics. With a measuring range of 0–25 mm and a visible reticle division of 1 mm, the device supports quick dimensional checks alongside visual counts, enabling faster pass/fail decisions in quality control workflows. Stable illumination for reproducible results Integrated LED illumination provides consistent, shadow-free lighting that stabilises the inspection environment and reduces variation caused by ambient light. Constant light output supports repeatable readings during batch inspections, so visual assessments remain comparable across shifts. The built-in light also reduces the need for additional lamps or fixtures at the workstation, simplifying setup and improving throughput for routine textile checks. Robust build and ergonomic portability Housed in a metal enclosure, the unit is designed to withstand daily workshop handling while staying lightweight at approximately 0.1 kg. Compact external dimensions (55 × 38 × 50 mm) make the device portable and easy to position over samples or inside inspection fixtures. The combination of a durable case and low weight supports mobile quality routines—inspectors can carry the instrument between bench stations without compromising precision. Practical applications and measurable benefits Ideal for textile manufacturers, repair workshops and laboratory settings, the instrument suits thread counting, weave analysis and small-area dimensional checks. The reliable optics and uniform lighting translate into fewer ambiguous results, quicker inspection cycles and reduced rework rates. When integrated into standard quality-control steps, the tool contributes to improved line efficiency and clearer documentation of visual criteria. For specialist advice and procurement of the Metav IndustryLine Thread Counter M503.124, contact Metav Werkzeuge for delivery options and product guidance. Technical data Article number: M503.124 GTIN: 4054469144573 Customs tariff number: 90138090 Core specifications Magnification: 10× Lens diameter: Ø30 mm Dioptre: 10 Measuring range: 0–25 mm Visible reticle division: 1 mm Dimensions: 55 × 38 × 50 mm Weight: 0.1 kg Special features Metal housing Coated lens (antireflective) Integrated LED illumination Compact, portable design FAQ What magnification does the instrument offer? The Thread Counter M503.124 provides 10× magnification for clear visual separation of individual threads. Is the lens treated to reduce reflections? Yes — the device uses a coated Ø30 mm lens to improve contrast and reduce stray light during inspections. What measurement range is available for checks? The instrument supports a measuring range of 0–25 mm with a visible 1 mm reticle division for quick dimensional reference. Is the unit robust enough for workshop use? The Thread Counter M503.124 features a metal housing and a compact, portable form factor suitable for routine workshop handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a compact optical reference with 25× magnification for consistent visual checks and alignment; combine precise repeatability with easy handling to streamline inspections — order directly via Metav Werkzeuge or ask our consultants for application advice. Peak Standard Template Typ 24 — 25× magnification optical reference Peak Standard Template Typ 24 is a compact optical reference designed for repeatable visual checks and alignment in optical inspection tasks. Compact optical reference tool Precise visual comparison standard Suitable for laboratory and workshop use Designed for dependable visual comparison and measurement The 25× magnification delivers a clear enlargement that supports reliable visual comparison without complex optics. As a standards template for optical work, the device provides a stable reference that reduces variability between inspections and supports consistent decision-making. This benefit is particularly relevant for quality control and visual inspection routines where repeatability and traceability matter. Easy integration into inspection routines and documentation The template acts as a straightforward visual benchmark that can be placed alongside samples or assembly features to speed up pass/fail assessments. By using an established reference, teams can reduce interpretation time and document results more consistently. The simple format makes it suitable for both bench-top checks and integration into photographic documentation workflows, helping to maintain a clear audit trail. Reliable choice for workshops and optics laboratories Built for routine use in optics and inspection contexts, the template supports durable day-to-day application and helps to standardise inspection practice across shifts and locations. The combination of a familiar form factor and a defined optical magnification contributes to operational consistency, making it an efficient tool for both experienced technicians and operators new to visual metrology. Practical information and visual assets for fast adoption The product arrives as a ready-to-use standards template and is supplied with high-resolution image assets to aid documentation and training. The compact design simplifies storage and handling on the workbench, while the clear reference markings aid quick alignment and repeatable placement. Use cases include visual acceptance checks, comparative inspections and reference photography for process monitoring. Contact Metav Werkzeuge today for application guidance or to arrange supply of the Peak Standard Template Typ 24 — Metav Werkzeuge GmbH is available at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: MS905.243 Name: Peak Standard Template Type: Typ 24 Manufacturer: Peak Magnification: 25× Facts SKU: MS905.243 Magnification: 25× Category: Optics Special features Compact optical standards template Ideal for repeatable visual checks and alignment Image assets available: MS905243-main.jpg FAQ What magnification does the template provide? The template provides 25× magnification, which is suitable for enhanced visual comparison and inspection tasks with fine detail. Is the Peak Standard Template Typ 24 suitable for laboratory use? Yes, the Peak Standard Template Typ 24 is designed for both laboratory and workshop environments where consistent visual references are required. Can the template be used for photographic documentation? Yes, the template can be placed alongside parts for comparative photography to document inspection results and support traceability. Does the product include digital assets or images? Image assets are available for the template; see the listed asset MS905243-main.jpg for a high-resolution reference image. How does the template support repeatability in inspections? By providing a fixed optical reference at 25× magnification, the template reduces subjective interpretation and simplifies repeatable placement for consistent pass/fail assessments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining 25× magnification with the compact Type 25 format delivers a dependable optical reference for detailed inspection and alignment tasks; order the Peak reticle directly via Metav Werkzeuge or consult our specialists for compatibility advice. Peak Reticle Typ 25 — 25× magnification optical reference The Peak Reticle Typ 25 is a compact optical reference designed to support precise visual inspection and alignment in workshop and laboratory environments. 25× magnification for fine detail Optical reticle for inspection and alignment Standard Type 25 format for compatibility High-magnification reference for detailed inspection The 25× magnification of this optical reticle provides a clear, enlarged view of fine structures, enabling more accurate visual assessments than unaided observation. In quality control and component inspection, the enlarged reference pattern reduces interpretation errors and supports repeatable judgements. The magnification is a direct aid to measurement tasks, clarifying edges and marks that would otherwise be difficult to evaluate under standard viewing conditions. Designed for seamless integration into inspection setups Manufactured in the familiar Type 25 format, the reticle has been conceived to sit comfortably within common eyepiece mounts and inspection routines. This compatibility with standard optical setups minimises downtime during changeover and simplifies equipment planning. Where interchangeability and quick setup are priorities, a standardised format means fewer bespoke adaptions and a more consistent workflow across multiple stations. Accelerates alignment and documentation workflows Using a fixed reference grid for visual alignment makes adjustments more straightforward and verifiable. The reticle supports precise alignment steps by presenting a stable, magnified reference that assists with positioning, focusing and photographic documentation. For processes that require documented inspection steps, the clearer visual result improves traceability and reduces rework, contributing to measurable gains in process efficiency. Practical benefits for labs, workshops and inspection benches Compact design and defined optical function make the reticle a low-complexity addition to inspection benches and microscopes. The grid pattern serves as an objective visual aid that helps maintain consistent results across operators and shifts. Where rapid assessments are part of routine checks, the reference simplifies decision-making and integrates into existing procedures without complex calibration. Contact Metav Werkzeuge to discuss how the Peak Reticle Typ 25 and its 25× magnification can be integrated into current inspection setups; Metav Werkzeuge’s experts will advise on compatibility and supply options. Technical data Article number: MS905.245 Brand: Peak Product name: Peak Reticle Typ 25 Facts Magnification: 25× Category: Optics SKU: MS905.245 Special features Optical reticle for inspection and alignment Type 25 format for standardised fit Suitable for visual inspection and alignment tasks FAQ What magnification does the reticle provide? The Peak Reticle Typ 25 provides a 25× magnification for enhanced visual inspection. Can the reticle be used with microscopes and inspection eyepieces? The reticle is supplied in a Type 25 format intended for compatibility with common optical setups and eyepiece mounts. What tasks is the reticle best suited to? The reticle is ideal for detailed inspection, visual alignment and photographic documentation where a magnified reference aids accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Peak Thread Counter, Thread Counter The Peak Thread Counter is a compact, rectangular Thread Counter with 6x magnification designed for precise textile inspection and simple in-line measurement. Compact rectangular design for easy handling 6x Magnification for clear thread counting Engraved mm scale on foot for exact measurement Lightweight Aluminium body in black 25 x 25 mm field of view for consistent checks Clear magnification for fast textile inspection The instrument delivers 6x magnification through an x1 lens, giving a 25 x 25 mm field of view that matches the engraved scale on the foot. This combination allows rapid, repeatable counts of yarns and threads without moving the sample. The focused view reduces eye strain and speeds up routine quality checks, so inspections become both faster and more reliable. Reliable measurements thanks to an engraved mm scale Each side of the Foot features an engraved mm scale, with the scale length corresponding exactly to the Width of the Field of View. This ensures measurements are directly comparable and reproducible across samples. Because the scale is permanently engraved, there is no risk of wear that could affect accuracy, supporting long-term consistency in Quality Control. Robust, lightweight construction for everyday use Constructed from Aluminium with a black finish, the Thread Counter combines durability with low weight for handheld operation. The solid build protects delicate optics while the lightweight housing keeps operator fatigue low during extended use. The simple shape and finish also make cleaning straightforward, an advantage in production and laboratory environments. Who benefits from this measuring tool Textile inspectors, laboratory technicians, tailors and hobbyists will all find value in the Peak Thread Counter for tasks requiring fast thread counts and small-scale inspections. The device is especially useful where portability and quick verification are needed, such as on the shop floor, at the production line or during incoming goods checks. Easy to use even for newcomers Place the sample under the lens, align the area of interest with the engraved mm scale and count threads across the 25 x 25 mm view. The uncomplicated design requires no calibration for basic counts, and the engraved scale eliminates conversion steps. For precision work, pair visual checks with standard sampling procedures to ensure representative results. Choose the Peak Thread Counter for dependable, repeatable textile measurement — for technical questions or purchase support contact Metav Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Thread Counter Brand: Peak SKU: MS905.379 Material: Aluminium (black) Magnification: 6x Lens: x1 Field of view: 25 x 25 Special feature: Engraved mm scale on each side of the foot Additional information: Due to its small dimensions this Thread Counter is easy to handle; a mm-scale is engraved on each side of the foot and the scale length corresponds to the Width of the Field of View UID: MS905.379 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ How do I use the Peak Thread Counter for a quick yarn count? To use the Peak Thread Counter from Peak simply place the fabric under the lens, align the area with the engraved mm scale and count the threads visible across the 25 x 25 mm field of view; this method provides quick and repeatable results. Is the Peak Thread Counter suitable for professional quality control? Yes, the Peak Thread Counter by Peak is suitable for professional quality control because the engraved mm scale and 6x magnification enable reproducible measurements required in inspection routines. What material is the Peak Thread Counter made of and is it durable? The Peak Thread Counter is made from Aluminium with a black finish; this construction provides a durable yet lightweight tool well suited for daily use in production or laboratory settings. Can beginners use the Peak Thread Counter without training? Beginners can use the Peak Thread Counter from Peak without extensive training because its straightforward design and engraved scale make basic thread counting intuitive and reliable.

Compact precision and repeatable alignment combine in a simple format: the No. 3, Ø26 mm template offers clear reference points for optical tasks while keeping handling straightforward and stock management efficient. Order via Metav Werkzeuge or consult the specialists for compatibility and delivery from Emmerich. Peak templates Nr. 3, Ø26 mm — Optical alignment template A Peak templates Nr. 3, Ø26 mm stencil intended for precise marking and standardised alignment in optical workshops and inspection stations Precision Ø26 mm template for consistent marking Standard No. 3 format for optical measurements Compact stencil for fast alignment in labs Clear reference points for quality inspection Consistent alignment that speeds up assembly and inspection A repeatable layout is essential in optical work. The Ø26 mm reference hole in this No. 3 format provides a stable datum for positioning components, reducing setup time and minimising measurement variation. By standardising the marking process with a fixed template, throughput improves and rework is reduced. The combination of fixed geometry and simple handling supports efficient process steps in production and inspection, delivering measurable gains in cycle time and traceability. Seamless fit with optical workflows and inspection routines Designed for use in optics environments, this stencil integrates with common laboratory and workshop procedures. The standard No. 3 sizing allows straightforward comparison across batches and fixtures, helping to harmonise workstations and measurement protocols. Where visual checks and mechanical alignment intersect, the template acts as a reliable guide for repeatable placement and quick verification. Clear, consistent reference points make documentation easier and support quality control without complex fixtures. Reliable sourcing and documentation for professional use Availability and clear identification are important for procurement and inventory control. The product is listed under SKU MS905.143, ensuring unambiguous ordering and stocking. Built for practical workshop use, the template supports standardised processes and reduces time spent searching for suitable aids. Specification visibility—such as the fixed Ø26 mm dimension and standard No. 3 classification—helps maintenance planners and quality engineers to match tooling to procedure requirements with confidence. Discuss Peak templates and ordering options with Metav Werkzeuge for reliable optical alignment — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS905.143 Designation: Peak templates Designation 2: Nr. 3, Ø26mm Brand: Peak Category: Optik Facts Diameter: 26 mm Type: Nr. 3 SKU: MS905.143 Special features Image available: MS905143-main.jpg Purpose: Optical marking and alignment template FAQ What is the primary application of this template? The template is intended for optical marking and alignment tasks; the Ø26 mm hole in the No. 3 format supports consistent positioning during inspection and assembly. Is the product identified for ordering purposes? Yes, the item is listed as SKU MS905.143 and described as Peak templates Nr. 3, Ø26mm for unambiguous procurement. Can this stencil be used across different workstations? Standard No. 3 sizing and the clear Ø26 mm datum make the stencil suitable for harmonising procedures across multiple benches and inspection stations. Does the template suit precision inspection routines? The fixed geometry and repeatable reference points assist precision inspection by simplifying placement and enabling consistent visual checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The compact optical template combines reliable repeatability with workshop-friendly handling thanks to its nominal diameter of Ø26 mm and clear designation; order directly via Metav Werkzeuge or consult their advisors for technical guidance. Peak templates Nr. 7 — Optical template with Ø26 mm main aperture The Peak template Nr. 7 is a precision optical template intended for alignment, inspection and marking tasks in optical workshops and inspection labs. Optical template for precise alignment Nominal diameter 26 mm Compact, workshop-ready design SKU MS905.147 for traceable ordering Repeatable alignment for optical inspection The core advantage of this optical gauge is its ability to provide repeatable positioning for small-diameter components, specified here as Ø26 mm. Where repeatability reduces cycle time, the template ensures that measurements and markings are performed consistently, which supports faster quality checks and fewer retests. The clear nominal size allows quick selection from inventory and simplifies process planning, helping inspection teams maintain throughput without compromising on measurement reliability. Compact format that supports workshop workflows Designed to be workshop-ready, the template's compact format makes it straightforward to store, transport and integrate into existing inspection benches. Its concise designation and traceable SKU (MS905.147) enable rapid reordering and inventory control within procurement systems. Because the tool is focused on a single, well-defined aperture size, it reduces setup complexity during routine tasks, thereby lowering the risk of positioning errors and saving technician time on repetitive operations. Easy integration with optical measurement setups The template functions as a simple reference for alignment and marking in conjunction with visual inspection tools or microscopes and camera systems. Its defined aperture aids in centring lenses, frames or small components for subsequent measurement or processing, and the plain design supports unobstructed sight lines for visual comparison. Where process documentation is required, the template’s clear specification supports traceable records for audits and quality reports, promoting consistent outcomes across shifts. Reliability and supply from a precision partner Procurement teams benefit from sourcing such specialised fixtures through a single, reliable supplier: Metav leverages a broad range of measurement products and a long-standing logistical presence in Emmerich to ensure dependable supply. The combination of accessible precision tools and centralised distribution reduces the number of vendors to manage and helps maintain consistent quality standards across workshops and service centres. This makes the template a pragmatic choice for facilities seeking simple, verifiable aids for optical inspection. Contact Metav Werkzeuge for advice on integration and availability of the Peak template Nr. 7 (SKU MS905.147) — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical information and ordering support Technical Data Article number: MS905.147 Name: Peak templates Designation: Nr. 7, Ø26mm Brand: Peak Category: Optik Data Diameter: 26 mm Special features Application area: Optik Image available: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/75/18/d0/67/67d0187537a8aad2184c4903/MS905147-main.jpg SKU: MS905.147 Designation 2: Nr. 7, Ø26mm FAQ What is the nominal aperture of this template? The template is specified with a nominal aperture of Ø26 mm, which is indicated for the Peak template Nr. 7 (SKU MS905.147) and suited to small-diameter alignment tasks. Can the template be used for lens centring and frame marking? Yes, the Peak template Nr. 7 is designed for alignment and marking operations in optical contexts and can assist with preliminary centring tasks prior to measurement or processing. Is the SKU useful for procurement and inventory control? The SKU MS905.147 provides traceability for ordering and stock management; it is recommended to reference this number when reordering or documenting fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise Ø26 mm sizing and a compact, flat stencil design for faster optical layout and repeatable marking — an economical addition to optical workshops. Order the Peak template directly via Metav Werkzeuge or ask their specialists for tailored advice. Peak templates No. 9, Ø26 mm — optical layout stencil The Peak templates is a compact optical stencil designed for precise layout and frame marking in lens and frame workshops. Peak template No. 9, Ø26 mm For optical layout and frame marking Compact, flat stencil for easy handling Compatible with standard optical workflows Precise marking for consistent optical layouts The flat stencil delivers a standardised aperture of Ø26 mm, enabling reliable positioning and repeatable marking across batches. With its No. 9 designation, the stencil simplifies alignment tasks commonly encountered in optical assembly and inspection. This consistent geometry reduces measurement variation and supports faster setup times in production or repair environments, improving overall process efficiency. Seamless integration into optical workflows Designed to fit into existing optical processes, the stencil aids visual checks and template-based adjustments during frame and lens handling. The flat stencil format supports quick placement and removal, which minimises handling time and helps maintain production flow. Clear aperture definition assists in rapid verification steps, so operators can complete routine layout tasks with fewer adjustments and less rework. Practical design for everyday workshop use The compact format and straightforward geometry make the tool easy to sort and store alongside other workshop aids. Its compatibility with common layout routines ensures it becomes a dependable part of daily operations, contributing to consistent results and reduced setup complexity. The construction supports rapid identification of the required template size, helping technicians keep processes lean and predictable. For a reliable addition to optical layout and marking procedures, request the Peak No. 9 Ø26 mm template from Metav Werkzeuge — Metav’s team in Emmerich can advise on suitability for specific workflows and supply details at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: MS905.149 Product name: Peak templates No. 9, Ø26 mm Brand: Peak Facts Diameter: Ø26 mm Type: No. 9 SKU: MS905.149 Category: Optics Special features For optical layout and frame marking Flat stencil design for quick handling Compatible with standard optical workflows FAQ What is the intended use of this template? The Peak templates No. 9 is intended for optical layout, frame marking and quick verification tasks where a standardised Ø26 mm aperture is required. Is the Ø26 mm aperture suitable for lens positioning? Yes, the Ø26 mm aperture of the Peak templates supports common positioning and inspection routines used in lens and frame workshops. Can this stencil be integrated into production workflows? The flat, compact format is compatible with standard optical workflows and is suitable for repetitive marking and quick layout checks. Which item code identifies this template? This product is listed under article number MS905.149 and is referenced as Peak templates No. 9, Ø26 mm in catalogues. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining consistent precision with a fixed Ø26 mm aperture, this optics stencil delivers repeatable marking and fast layout setup; order the Peak template directly via Metav Werkzeuge or ask our consultants if needed. Peak template No. 10 (Ø26 mm) – optics layout stencil Peak template No. 10 for precise marking and alignment in optical applications Ø 26 mm precise aperture Designed for optical layout work SKU MS905.150 for fast ordering Reliable marking that reduces rework The precision aperture of this optics stencil ensures consistent centre points and contours for lens mounts and frame templates, which reduces the need for rework and manual correction. With a fixed Ø26 mm opening, the pattern produces uniform reference marks across repeated operations, improving dimensional consistency in production and inspection. The clear, repeatable result supports controlled assembly steps and reduces downstream variability in alignment tasks. Faster layout and simpler inspection workflows Integrating the stencil into existing jig and marking processes speeds up layout operations and shortens cycle times. The standardised aperture supports quick positioning and repeatable referencing during both prototyping and batch work, contributing to a time-saving workflow. Clear reference marks simplify optical inspection and allow straightforward comparison against gauges or measurement tools, enabling reliable checks without complex adjustments or additional tooling. Practical supply and trusted sourcing for workshops Supplied under the Peak designation and referenced by SKU MS905.150, this stencil is suitable for workshops and optical labs that prioritise dependable consumables and straightforward procurement. Metav’s position as a precision partner means access to centralised stock and competent advisory support; procurement from a consolidated supplier reduces lead-time uncertainty and supports continuous production. The combination of functional simplicity and dependable availability fosters confidence in daily operations. Contact Metav Werkzeuge for tailored advice on selecting the right optics stencil and confirm compatibility with existing fixtures — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: MS905.150 Product name: Peak template No. 10, Ø26 mm Manufacturer: Peak Facts Diameter: 26 mm Special features Category: Optics Image asset available FAQ What is the intended use of this stencil? The stencil is intended for optical marking and layout tasks; the Peak template No. 10 provides a consistent Ø26 mm aperture for repeatable reference marks. Is the stencil compatible with inspection workflows? Yes, the standard aperture and clearly defined edges support inspection routines and make comparison with measurement tools straightforward when using the Peak stencil (SKU MS905.150). How is the item referenced for ordering? Order using SKU MS905.150 or refer to the designation Peak template No. 10, Ø26 mm for fast identification in procurement systems. Can this stencil be integrated into existing jigs? The fixed aperture and compact format allow simple integration into marking jigs and positioning fixtures commonly used in optical workshops. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise alignment, straightforward handling and compact Ø26 mm dimensions for reliable optical marking. Order via Metav Werkzeuge for dependable supply and expert advice on integration. Peak templates Nr. 11, Ø26 mm — Optical template for precision marking The Peak templates Nr. 11, Ø26 mm is a compact optical template designed for accurate positioning and repeatable marking in small-scale optics and inspection setups. Compact optical template Ø26 mm Precise positioning for marking and alignment Durable format for workshop and lab use Suitable for optical and inspection applications Consistent alignment and measurable outcomes The template delivers precision alignment for small components thanks to its defined Ø26 mm aperture. In practical terms, this means faster set-up times and fewer measurement iterations when aligning lenses, mounts or test specimens. The clear geometry reduces adjustment steps and supports repeatability in serial inspection tasks, helping to maintain process stability and minimise rework. Simple integration into inspection workflows Designed for compatibility with standard optical benches and jigs, the unit is ideal where compact, clearly defined markings are required. The template’s format supports common fixtures used in inspection and assembly environments, easing adoption without significant changes to existing tooling. The compact nature of the item reduces storage needs and allows quick swapping between stations, increasing operational efficiency. Trusted design for optical applications Constructed for everyday use in optics and related quality-control processes, the template balances robust handling with the fine geometry demanded by inspection tasks. Its specification focuses on what matters to the production floor: consistent aperture size, stable placement and rapid identification of reference points. These attributes deliver tangible time savings and contribute to a more predictable quality output. Contact Metav Werkzeuge to confirm suitability for specific optics tasks or procure the Peak template MS905.151 through Metav Werkzeuge’s supply network in Emmerich Technical Data Article number: MS905.151 Product name: Peak templates Designation: Peak Schablonen Secondary designation: Nr. 11, Ø26mm Facts Type: Nr. 11 Diameter: 26 mm Category: Optik Special features Compact optical template format Precise Ø26 mm aperture Suitable for marking and alignment in optics FAQ What is the exact aperture size of the template? The aperture is Ø26 mm as stated for the Peak templates Nr. 11 (MS905.151). Can the template be used on optical benches and jigs? Yes, the design is compatible with common inspection and bench fixtures, making integration straightforward for optics and small-scale assembly. Is this template suitable for repeated production checks? The compact, defined aperture supports repeatability and is suitable for routine inspection tasks in workshop and lab environments. Which SKU identifies this product for ordering? Order using SKU MS905.151 for the Peak templates Nr. 11, Ø26 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The Peak template No. 12 (Ø26 mm) delivers a standard reference aperture for optical assembly and inspection; its clear Ø26 mm specification and familiar No. 12 sizing simplify component selection and documentation. Order the item directly via Metav Werkzeuge or request further application advice from our consultants. Peak optical template No. 12, Ø26 mm — Optical template for aperture checking A Peak template No. 12 (Ø26 mm) designed as a compact reference for optical layout, aperture verification and visual inspection tasks in workshops and small-scale production. Precision Ø26 mm aperture For optical layout and inspection Standard No. 12 sizing Consistent aperture specification to reduce rework A clearly defined Ø26 mm aperture provides an objective reference when verifying lens mounts, mounts for filters or frame openings. Using a standardised No. 12 template supports reproducible checks and reduces interpretative errors during quality control. The marked sizing eliminates guesswork in visual checks, which helps to lower the rate of rejected parts and to speed up downstream assembly processes through improved repeatability and traceable pass/fail decisions. Faster decision-making in production and inspection Integrating a simple reference tool into the workflow shortens inspection time and streamlines communication across departments. The template’s unambiguous diameter notation aids documentation and order specifications, allowing teams to compare aperture requirements at a glance. For operations handling multiple lens sizes, the standard No. 12 marking supports rapid sorting and consistent record-keeping, which contributes to measurable improvements in throughput and fewer misunderstandings between planning and shop floor staff. Practical handling and storage for everyday use The compact format of this optical template makes it straightforward to keep alongside inspection benches and in inspection kits. Lightweight and simple to position, the tool fits into established procedures without the need for additional fixturing. As a tangible, easy-to-reference item, the template complements electronic measurement data by offering a quick visual cross-check; this dual approach strengthens overall process reliability without complicating existing routines. For a precise match to process requirements, contact Metav Werkzeuge to discuss the Peak No. 12 Ø26 mm template and how it integrates with current inspection standards — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: MS905.152 Name: Peak templates No. 12, Ø26 mm Brand: Peak Facts Diameter: 26 mm Type: Nr. 12 Category: Optics Special features Application area: optical layout and inspection Standardised aperture reference Compact format for bench use FAQ What is the exact diameter of this template? The Peak template No. 12 (SKU MS905.152) specifies an Ø26 mm aperture for use as an optical reference. Which applications is the template suited for? The template is intended for optical layout, aperture verification and quick visual inspection tasks where a standard No. 12 aperture reference is required. Is the material of the Peak template specified? Material information is not provided for the Peak template No. 12 in the available data. Can this template replace precision measuring tools? The template offers a reliable visual reference for aperture checks and sorting; it complements precision measurement instruments but does not substitute for calibrated dimensional metrology. How does the standard No. 12 sizing help in production? Using the No. 12 designation creates a common language for aperture requirements, aiding documentation, ordering and quick visual comparisons across batches and assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the precise 26 mm diameter and standard No. 2 geometry to ensure consistent optical layout and repeatable marking processes; order the Peak templates No. 2 (Ø26 mm) directly via Metav Werkzeuge or ask our consultants for application advice. Peak templates No. 2 — Optical template (26 mm) A Peak template No. 2 for optical layout and marking, supplied in a standard 26 mm diameter for consistent positioning in workshop and inspection workflows. Precise 26 mm diameter Standard No. 2 geometry For optical layout and marking Consistent sizing that reduces rework and speeds setup The 26 mm diameter combined with the No. 2 format provides a reliable datum for repeated operations; where repeatability is required, the standardised dimension reduces alignment time and the need for trial adjustments. The template is intended as a dependable guide in optical workflows, enabling a measurable improvement in process throughput by lowering setup variance and associated rework. Technical teams benefit from predictable positioning, which supports efficient batch processing and quality checks. Fits into existing optical processes with minimal adaptation Designed for use in optics-oriented environments, this template integrates with measuring jigs and marking fixtures without complex modification. The simple geometry of the No. 2 format allows the template to be used as a stencil, gauge or reference for assembly and inspection tasks. Because the design is straightforward, it helps to streamline handling and reduces the learning curve for new operators, which contributes to shorter lead times and steadier production output. Reliable specification for quality assurance and documentation Suppliers and QA personnel will value the clear specification of a standard 26 mm diameter and defined format for traceable documentation. The template’s consistent sizing supports inspection protocols and documentation practices, making it easier to record conformity across production runs. Where auditability matters, the presence of a standard template aids in demonstrating controlled, repeatable procedures and supports overall quality management. For precision optical marking and standardised layout work, request the Peak templates No. 2 (Ø26 mm) from Metav Werkzeuge or consult our specialists at info@metav-werkzeuge.com or +49 2822 7131930 to confirm suitability for specific applications. Technical data Article number: MS905.142 Manufacturer: Peak Designation: Peak Schablonen / Nr. 2, Ø26mm Core specifications Diameter: 26 mm Features Category: Optik Type: No. 2 SKU: MS905.142 FAQ What is the exact diameter of the template? The template has a diameter of 26 mm, specified for repeatable positioning in optical layouts. Which format does the template follow? The item is supplied in the No. 2 format, a standard geometry for stencil and marking tasks in optical applications. Is the template suitable for use in measurement jigs? Yes, the Peak templates No. 2 are intended for integration into optical fixtures and measuring jigs where a standard reference diameter is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise Ø26 mm alignment, compact handling and straightforward identification for consistent optical marking tasks; order the stencil directly via Metav Werkzeuge or consult the team for specification matching. Peak template No. 4 (Ø26 mm) — Optical stencil for precise 26 mm aperture The Peak template No. 4 is a compact optical stencil intended for accurate 26 mm aperture marking and layout tasks in optics workshops and inspection benches. Optical stencil No. 4 Ø26 mm Precise Ø26 mm aperture Compact format for optics workshops Consistent alignment and measurable precision The stencil provides a reliable reference for repeatable marking and inspection, based on a defined Ø26 mm aperture that secures consistent centre‑to‑edge positioning. Its straightforward geometry supports process control and reduces setup variance, contributing to measurable repeatability in series work. For production environments where precision and quick verification are required, this optical gauge helps to standardise routines and minimise downstream rework. Integration into inspection and assembly workflows Designed for simple inclusion in visual inspection, labelling or assembly jigs, the stencil supports a linear workflow without demanding specialised fixtures. The clear aperture and compact footprint make it suitable for use on inspection tables or alongside handheld instruments, enabling operators to maintain consistent reference points during measurement or trimming operations. Where traceable markings are necessary, the stencil offers a quick method to align and confirm a 26 mm datum without complex set‑up procedures. Practical format for busy workshops and labs The compact construction suits bench use and storage in professional optical environments. Its form factor reduces clutter while remaining accessible when rapid checks are needed during assembly or quality control. For facilities balancing throughput and accuracy, the stencil’s modest size aids efficient handling and storage, helping teams keep inspection points close at hand and easily repeatable between shifts. Clear identification and catalogue traceability Item identification supports administrative workflows: the stencil is listed as MS905.144 and labelled as No. 4, Ø26mm for straightforward procurement and inventory control. A photographic asset is available for quick visual confirmation during ordering or stock checks, which assists purchasing and quality departments in matching the tool to application requirements without ambiguity. For ordering or application advice on the Peak template No. 4 (MS905.144) — and to benefit from Metav Werkzeuge’s experience in precision tooling and supply — contact Metav Werkzeuge for tailored procurement and delivery from Emmerich Technical data Article number: MS905.144 Name: Peak template No. 4 Alternate designation: Nr. 4, Ø26mm Category: Optics Specifications Diameter: 26 mm Type: No. 4 Features Optical stencil for 26 mm aperture Compact format suitable for workshop use Image available for verification FAQ What is the exact aperture size of the stencil? The aperture is 26 mm, specified and listed under the designation Nr. 4 for the Peak template (MS905.144). Is the stencil suitable for optical inspection tasks? Yes, the template is intended as an optical stencil for alignment and marking tasks in optics workshops and inspection benches. How is the item identified in the catalogue? The part is catalogued as MS905.144 and labelled Peak template No. 4, Ø26mm for unambiguous ordering and inventory control. Are images available to verify the tool before purchase? An image asset is provided for MS905.144 to assist with visual confirmation during specification and ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, clearly defined Ø26 mm aperture and the consistency of a branded Peak template to speed up optical layout tasks while maintaining repeatable results; order directly via Metav Werkzeuge or consult our specialists for application advice. Peak Optical Template – No. 5, Ø26 mm (MS905.145) The Peak Optical Template No. 5 is a precision stencil designed for optical layout and marking tasks where a defined Ø26 mm aperture is required in inspection and assembly workflows. Ø26 mm calibrated aperture Precise No. 5 optical template Peak-branded quality assurance Accurate aperture control for consistent optical marking The defined Ø26 mm opening provides a reliable reference for lens layout and small-part alignment, reducing measurement guesswork in routine optical tasks. The compact format and exact sizing support repeatable placement and positioning, which leads to fewer reworks and a more efficient production flow. Built to serve optical workshops and inspection benches, the template is ideal where a consistent aperture is required for marking, gauging or visual checks. Streamline inspection and assembly processes with fewer steps Integrating the template into a workstation simplifies the handling chain: the prepared aperture removes the need for ad-hoc measuring and speeds up alignment operations. This reduction in procedural steps improves throughput and contributes to a smoother workflow during batch checks or serial assembly. The simple, standardised format aligns well with existing inspection jigs and visual aids used in optical and small-component production. Dependable sourcing and practical support for precision tasks Paired with Metav’s commitment to accessible precision, this branded template benefits from straightforward availability and advice from a specialist supplier. The product’s clear designation and compact specification make procurement and inventory straightforward, while Metav’s quality filtering and distribution in Emmerich ensure consistent supply and expert guidance for integration into metrology or production setups. Choose the Peak Optical Template No. 5 via Metav Werkzeuge for consistent Ø26 mm aperture references and practical procurement support — contact Metav Werkzeuge in Emmerich for technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: MS905.145 Brand: Peak Designation: Peak templates Type/Size: No. 5 Core data Diameter: 26 mm Special features Category: Optics Secondary designation: No. 5, Ø26mm Image available: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/74/18/d0/67/67d018742285a7cc9c2fee0e/MS905145-main.jpg FAQ What is the exact aperture size of this template? The aperture is specified as Ø26 mm for the Peak Optical Template No. 5 (MS905.145). For which tasks is this template appropriate? The template supports optical layout, marking and visual alignment tasks where a consistent Ø26 mm reference is required; it is presented as the Peak Optical Template No. 5 for such applications. Is the Peak Optical Template No. 5 compatible with existing inspection jigs? Compatibility depends on the jig, but the standardised Ø26 mm opening of the Peak template (MS905.145) is intended to suit common optical and small-part fixtures. How is the product designated in technical documentation? The item appears as Peak templates, Type No. 5, secondary designation “No. 5, Ø26mm” and is listed under article number MS905.145. Where can further technical details or advice be obtained? Further application guidance and procurement details for the Peak Optical Template No. 5 (MS905.145) can be provided by Metav Werkzeuge specialists familiar with optical layout tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

A compact optical template offering Ø26 mm accuracy and simple integration into workshop processes; ideal for repeatable layout tasks where clear aperture control matters. Practical handling and a standardised size reduce setup time and contribute to more efficient production. Order the Peak template No. 6 (Ø26 mm) directly via Metav Werkzeuge or ask our consultants if needed. Peak template No. 6 – Ø26 mm optical template A sturdy optical template, Peak template No. 6, designed for precise aperture marking and pattern transfer in optical and laboratory environments. Precise Ø26 mm aperture for accurate alignment Compact format for simple storage and handling Clear marking for optical layout and pattern transfer Consistent precision for optical layout tasks The central feature is the Ø26 mm opening, which provides a reproducible reference for layout and alignment operations in optical work. By using a fixed aperture, measurement deviations are reduced and setup times are shortened; this leads to more consistent component positioning across batches. The clear aperture and defined rim make it straightforward to transfer positions or to control focal points during inspection, supporting higher throughput in routine tasks. Practical format that fits the workshop routine A simple, standardised template improves process reliability without adding complexity. The compact format supports organised storage and rapid retrieval on the bench, while the unambiguous diameter labelling assists in avoiding mix-ups during multi-stage procedures. With minimal handling required, workflow interruptions are reduced and quality checks can be performed more efficiently, which benefits both small specialist shops and institutional laboratories. Integration into measuring and inspection processes Designed for use alongside microscopes, optical comparators and marking jigs, the template functions as a neutral reference element in measurement sequences. The defined aperture aids in repeatable visual inspection and pattern transfer where consistent geometry is required. When paired with standardised fixtures or staging, the template contributes to a more streamlined inspection routine and clearer documentation of alignment steps. Contact Metav Werkzeuge for expert advice and reliable supply of the Peak template No. 6 (Ø26 mm) from Emmerich; our consultants can confirm compatibility with existing inspection setups and advise on delivery options Technical data Article number: MS905.146 Type: Nr. 6 Name: Nr. 6, Ø26mm Brand: Peak Facts Diameter: 26 mm Special features Category: Optics Image: MS905146-main.jpg FAQ What is the exact diameter of the aperture? The aperture measures 26 mm; the Peak template No. 6 (Ø26 mm) is supplied with this defined opening for consistent alignment. Which applications suit this template best? The template is intended for optical layout, visual inspection and pattern transfer tasks where a fixed Ø26 mm aperture supports repeatable positioning and reference marking. Is the template compatible with optical comparators and microscopes? Yes, the template is suitable as a reference element in conjunction with microscopes and optical comparators for visual inspection routines and alignment procedures. How is the item identified for ordering or inventory? The product can be referenced by SKU MS905.146 or as Peak template No. 6 (Ø26 mm) when placing orders or recording stock. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precision, compact format and straightforward handling to speed inspection and alignment routines. The combination of a defined Ø26 mm aperture and the compact No. 8 format provides consistent positioning for optical components and repeatable results in measurement setups. Order the Peak template directly via Metav Werkzeuge or ask our consultants if needed. Peak template No. 8 (Ø26 mm) The Peak template No. 8 (Ø26 mm) is a compact optical aperture stencil designed for precise positioning and alignment tasks in inspection, assembly and testing environments. Ø26 mm aperture for consistent positioning No. 8 format suitable for optical procedures Compact stencil for workshop usage Accurate positioning for optical inspection and assembly The stencil’s defined Ø26 mm aperture supports reproducible placement of lenses, apertures and small components, reducing setup deviations and saving time during routine checks. By using a fixed reference aperture, alignment steps become more predictable and less dependent on operator judgement, which enhances process accuracy and lowers the risk of rework. This is particularly useful in small-batch production and lab environments where repeatability is vital. Seamless integration into optical workflows Designed for optical workshops and inspection benches, the No. 8 format simplifies the handling of measurement jigs and positioning fixtures. The stencil acts as a reliable mechanical guide for camera, lens or sensor alignment procedures and can be combined with existing test rigs or holders. Clear labelling and a compact footprint make the item straightforward to store and retrieve within established workflow layouts, helping to maintain efficient throughput without adding complexity. Practical benefits and buying confidence The stencil is an economical way to introduce precision into everyday inspection tasks while keeping handling simple for technicians and engineers. The product designation MS905.148 identifies the exact item for procurement and stock control. Procurement via a trusted partner ensures steady supply and consistent quality; Metav’s Emmerich hub functions as a quality filter and logistics centre for European customers, offering pragmatic ordering and dependable fulfilment. For procurement advice or to secure supply of the Peak template No. 8 (MS905.148), contact Metav Werkzeuge for ordering guidance and reliable delivery from Emmerich. Technical data Article number: MS905.148 Name: Peak template Facts Diameter: 26 mm Type: Nr. 8 Special features Category: Optics Brand: Peak Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/70/18/d0/67/67d0187037a8aad2184c48fd/MS905148-main.jpg FAQ What is the aperture size of the stencil? The Peak template No. 8 features a defined Ø26 mm aperture, specified on the product data for MS905.148. Is this stencil suitable for lens alignment tasks? Yes, the stencil is intended as an optical aperture guide and can be used in lens alignment and positioning processes in inspection and assembly. How is the product identified for ordering? Order using the designation MS905.148 or the product name Peak template No. 8 to ensure the correct item is supplied. Can the template be integrated into existing test fixtures? The compact No. 8 format is designed for straightforward integration into measurement rigs and holding fixtures used in optical workshops. Who supplies this item through Metav? The product is listed and distributed with the SKU MS905.148 via Metav Werkzeuge; refer to that identifier when requesting stock or logistics details. Manufacturer: Peak / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Reliable repeatability and a compact Ø26 mm format make this template a practical choice for optical marking and inspection. Benefit from precise alignment and straightforward integration into existing inspection routines. Order the Peak template No. 1 directly via Metav Werkzeuge or consult our specialists for application advice. Peak template No. 1, Ø26 mm — optical template for marking and inspection Peak template No. 1 is a compact optical template designed for precise marking and alignment tasks in lens and optics workshops Precision Ø26 mm template for optical use Supports marking and alignment tasks Suitable for optics and inspection work Improve marking accuracy with a compact optical gauge The compact Ø26 mm format provides a consistent reference for small-diameter components, supporting improved precision in repetitive marking operations. In optical and inspection workflows, a defined template reduces variability between operators and minimises rework by giving a stable datum for visual checks and secondary machining. Where tight tolerances matter, the use of a standardised template translates into measurable gains in process reliability and throughput without introducing complex handling steps. Seamless fit into inspection and alignment processes Designed for workshop routines, the template aids simple visual inspection and alignment procedures. By offering a clear, reproducible outline, it helps streamline setups and shortens preparation time for batch work. The product supports both manual and semi-automated workflows, providing a reliable reference that complements measuring instruments and microscopes used in optical quality control. This results in fewer alignment errors and a steadier production flow. Practical handling for everyday workshop use The design focuses on ease of use: the compact shape is straightforward to position and holds its place during routine checks. Its format is well suited to repeated handling and quick swaps between inspection stations. For teams that value efficient, low-friction operation, the template offers a simple way to maintain consistent visual standards across tasks while keeping the process intuitive for technicians and inspectors alike. For a tailored recommendation or to add the Peak template No. 1 (SKU MS905.141) to an inspection kit, contact Metav Werkzeuge for ordering and product guidance. Technical data Article number: MS905.141 Name: Peak Schablonen Type: Nr. 1 Brand: Peak Facts Diameter: 26 mm Special features Category: Optik Designation: Nr. 1, Ø26 mm Image asset: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/72/18/d0/67/67d01872540165a317e1a693/MS905141-main.jpg FAQ What is the exact diameter of the template? The template has a diameter of Ø26 mm, suitable for small-diameter marking and alignment tasks. What tasks is this template intended for? It is intended as an optical template for marking, alignment and basic inspection tasks in lens and optics workshops. Is the Peak template No. 1 suitable for precision marking? Yes. The Peak template No. 1 (SKU MS905.141) is designed to provide a consistent reference for precision marking and alignment operations. Which product category does this item belong to? This item is listed under the optics category and is supplied as a template for optical applications. What material or coating does the template have? No material or coating is specified in the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the Standard Ø26 mm format and Peak's specialist design to ensure consistent optical alignment and simple integration into existing workflows; its compact format supports efficient storage and handling. Order the template directly via Metav Werkzeuge or speak with our consultants for application advice. Peak templates – Standard optical template, Ø26 mm A Peak template for optical alignment and marking tasks, the standard Ø26 mm stencil provides a compact, consistent gauge for workshop and laboratory use. Standard optical template, Ø26 mm Manufactured by Peak for optical use Suitable for alignment and marking Compact, easy to store Consistent alignment for reproducible results The Ø26 mm standard ensures a repeatable datum for a wide range of optical checks and simple marking operations. By using a uniform aperture size, setups require fewer adjustments and inspection routines become more predictable. The stencil functions as a stable reference in quality control tasks, where repeatability and clear positioning are essential for reliable measurement chains. Faster setups and fewer process interruptions Integration of the standard template into existing fixtures reduces setup time by providing a predefined reference point. The design supports streamlined workflows in optical inspection and assembly processes, leading to measurable gains in operational efficiency. Where speed and consistency are priorities, the stencil contributes to lower cycle times and reduced rework, which benefits production and laboratory environments alike. Practical handling that supports workshop routines The compact format and straightforward form factor make the stencil easy to store and retrieve during routine tasks. Its simple geometry facilitates rapid placement and visual verification without specialised tools. For technicians and quality engineers, the template acts as a convenient aid that helps maintain steady throughput while keeping handling steps minimal and transparent. Suitable contexts and target applications The stencil is aimed at optical technicians, metrology staff and workshop teams who require a reliable reference for alignment, marking and inspection. Typical applications include preliminary positioning, visual checks and quick-reference tasks during assembly or maintenance. The product supports standardised procedures and can be incorporated into existing documentation and inspection plans without major adaptations. Order the Peak Ø26 mm optical template from Metav Werkzeuge for dependable alignment performance — contact Metav Werkzeuge for tailored application advice or to request further technical details via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: MS905.153 Brand: Peak Designation: Peak templates / Standard, Ø26mm Facts Diameter: 26 mm Type: Standard Category: Optics Special features Standard format for optical use Compact stencil for alignment and marking Suited to workshop and laboratory applications FAQ What is the diameter of the template? The template has a diameter of 26 mm as specified for the standard Ø26 mm design. Which brand produces this optical stencil? This optical stencil is produced by Peak and is listed under SKU MS905.153. What primary tasks is the stencil intended for? The stencil is intended for alignment, marking and quick optical checks in workshop and laboratory environments. Can the stencil be integrated into existing inspection routines? Yes, the standard Ø26 mm format is designed to be compatible with common alignment and inspection procedures, facilitating quick integration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a wider field of view together with a generous working distance to speed up routine inspections and safe handling; the lens’s compatibility with NexiusZoom systems ensures straightforward integration. Order the attachment directly via Metav Werkzeuge or contact our consultants for specification support. Auxiliary lens 0.3× for NexiusZoom (NZ.8903) — 287 mm working distance, precision inspection accessory An Auxiliary lens 0.3× for NexiusZoom designed to expand the visible area for inspection while maintaining a stable 287 mm working distance for clear, accessible observation. 0.3× magnification for a wider field 287 mm working distance (±10 mm) for safe access Compatible with NexiusZoom, NexiusZoom EVO, ESD SKU NZ.8903 for straightforward ordering Increase inspection coverage without losing detail The 0.3× attachment lens reduces the optical magnification to broaden the field of view, allowing larger components or assemblies to be observed in a single frame. For production lines and quality-control benches, that translates into fewer repositioning steps and faster surface checks. The reduction in magnification does not sacrifice practical clarity: the optical system preserves focus across the expanded area, so visual assessment and measurement tasks remain reliable. This makes the accessory particularly useful for inspection, solder-joint checks and conformance verification where seeing more at once improves throughput. Maintain comfortable working space with predictable clearance A fixed working distance of 287 mm (±10 mm) gives operators a consistent, safe separation between lens and specimen. The specified tolerance indicates the practical placement window around the nominal value; staying within this range ensures the optical axis and focus remain within specification. For manual probing, soldering or component handling beneath the lens, the generous clearance reduces collision risk and creates room for tools and fixturing. The predictable spacing also assists in repeatable positioning for routine inspections and photographic documentation. Fast integration with NexiusZoom systems and accessories The lens is made for integration with the NexiusZoom family (NexiusZoom, NexiusZoom EVO and NexiusZoom ESD), enabling effortless switching between standard objectives and this lower-power attachment. As an attachment lens, it mounts into the existing optical path to alter the system’s effective magnification while retaining the base unit’s ergonomics and controls. This compatibility supports modular workflows: laboratories and workshops can adapt a single stereo microscope platform to different inspection tasks without acquiring separate microscopes, thereby saving bench space and simplifying operator training. For precision inspection workflows, order the Euromex Auxiliary lens 0.3× (NZ.8903) through Metav Werkzeuge or contact Metav Werkzeuge’s specialists for rapid supply and personalised advice from Emmerich. Technical Data Article number: NZ.8903 Product type: Auxiliary lens Brand: Euromex Key measurements Magnification factor: 0.3× Working distance: 287 mm (±10 mm) Compatibility & notes Compatible with: NexiusZoom, NexiusZoom EVO, NexiusZoom ESD Compatible stands: A, AP, U, B, BC FAQ What does the 0.3× factor mean for inspection tasks? The 0.3× factor reduces the microscope’s effective magnification and enlarges the observable area; the Euromex auxiliary lens NZ.8903 therefore allows larger parts to be inspected at once while preserving usable image quality. Is the working distance fixed and how precise is it? The nominal working distance is 287 mm, with a practical tolerance of ±10 mm; maintaining this spacing keeps the optical system within focus and preserves inspection accuracy when using the NZ.8903. Which NexiusZoom models are supported by this lens? The attachment is compatible with NexiusZoom, NexiusZoom EVO and NexiusZoom ESD, permitting direct integration into those platforms for expanded field-of-view inspections. Can this lens replace existing objectives for photographic documentation? Yes; when fitted, the auxiliary lens changes the system’s effective magnification to capture broader scenes, which can simplify photographic documentation of larger assemblies without moving the specimen. How is the lens mounted and does it require recalibration? The lens is an attachment that integrates into the microscope’s optical path; routine verification of focus and framing is recommended after installation, but major optical recalibration is not normally required for standard inspection use of NZ.8903. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, high-magnification inspection tool that combines 10× clarity with a robust metal handle for consistent, fatigue‑reducing operation; order the item directly via Metav Werkzeuge or consult our specialists for further advice. Hand magnifier Tech-Line — compact inspection lens with 10× magnification and metal handle (SCHWEIZER) The Hand magnifier Tech-Line is a compact inspection lens designed for close visual work in workshops, laboratories and hobby environments, offering high magnification in a sturdy, portable format. 10× magnification for fine detail Metal handle for stable handling Compact, Tech‑Line quality Suitable for close visual inspection Faster, more reliable inspection with high magnification The Hand magnifier Tech-Line delivers 10× magnification, enabling rapid identification of surface defects, print errors or tiny components that would otherwise require time‑consuming inspection under low magnification. The high enlargement reduces inspection time and supports consistent quality control in small‑batch production or workshop contexts. Operators benefit from clearer visual assessment, which translates directly into fewer reworks and a more efficient inspection routine. Stable handling and durable build for everyday use A metal handle provides a solid grip and balanced weight distribution, which minimises hand tremor during examination and lowers operator fatigue during extended use. The Tech‑Line construction emphasises durability and serviceability, making the instrument suitable for regular use on the shop floor or at the bench. The compact design ensures the tool is easy to store and transport between workstations while maintaining a professional feel and reliable performance. Practical applications and straightforward care The lens is ideal for tasks such as jewellery appraisal, electronics inspection, watchmaking, stamp and coin examination, or any close‑up visual verification. Basic care—wiping the lens with a lint‑free cloth and an approved optical cleaner—keeps the optical surface clear and extends service life; avoid abrasive materials to prevent scratches. For industrial or precision applications where documentation is required, this inspection lens supports fast visual checks and complements measurement instruments in routine workflows. For procurement or technical enquiries regarding the Tech‑Line hand magnifier, contact Metav Werkzeuge in Emmerich for specification support and reliable supply from stock. Technical data Article number: 4000851742NW Brand: SCHWEIZER Product type: Hand magnifier Series: Tech-Line Packaging unit: 1 Facts Magnification: 10x Special features Metal handle Compact inspection magnifier Intended for close visual inspection FAQ What magnification does this lens provide? The lens offers 10× magnification, which is suitable for detailed visual inspection in workshop and hobbyist applications using the Tech‑Line hand magnifier. Is the handle suitable for continuous use in a workshop environment? Yes, the metal handle of the Tech‑Line hand magnifier is designed for stable, repeated handling and reduces fatigue during prolonged inspection tasks. Can the magnifier be used for electronics and watch inspection? The compact 10× lens is well suited to electronics and watch inspection where small components and fine details must be examined. How should the lens be cleaned to avoid damage? Clean the lens with a lint‑free cloth and an appropriate optical cleaner; avoid abrasive tissues or aggressive chemicals to preserve the optical surface of the hand magnifier. Is this magnifier appropriate for professional quality control checks? The Tech‑Line hand magnifier provides a quick visual aid to support quality control processes, offering clear 10× enlargement for the rapid detection of surface and assembly issues. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

A compact inspection tool that combines 8× magnification with a metal handle for steady, repeatable viewing — ideal for detailed visual checks in workshops and light inspection tasks. Order the Hand magnifier Tech‑Line directly via Metav Werkzeuge or contact the consultants for tailored advice. Hand magnifier Tech‑Line 8× with metal handle — SCHWEIZER Hand magnifier Tech‑Line for close visual inspection in workshops, quality control and fine‑assembly tasks 8× magnification for clear detail Metal handle — durable grip Tech‑Line series for professional use See fine detail with reliable 8× magnification The Tech‑Line hand magnifier provides 8× magnification, which enlarges small structures to make inspection, assembly and verification quicker and more reliable. In practical terms, the glass brings fine edges, printed markings and solder joints into sharp relief, enabling faster decision‑making on the shop floor. The optical design balances magnifying power with a usable field of view so that close‑up work can be carried out without excessive head movement. The result is a measurable improvement in inspection throughput and a reduction in rework, because defects are easier to spot at an earlier stage. Robust handling and consistent performance in daily use Designed for frequent handling, the instrument features a metal handle that resists wear and provides a steady grip during prolonged tasks. The solid construction reduces vibration and hand fatigue, which supports accurate visual judgement during repetitive inspections. Cleaning the lens and housing is straightforward: a soft, lint‑free cloth and a mild lens cleaner maintain optical clarity. The robust build of the Tech‑Line product reduces downtime due to damaged tools and contributes to a dependable working routine in small workshops and industrial bench environments. Typical applications and simple integration into workflows The magnifier is well suited to electronics assembly, jewellery checks, print inspection and quality control in small‑part manufacturing. Because it is a manual inspection aid, integration requires no special equipment — it is a straightforward complement to microscopes and precision measuring tools when quick visual confirmation is needed. The compact form factor supports portability between workstations, while the professional Tech‑Line specification signals consistent quality. For any uncertainty about suitability for a particular process, additional technical details and practical advice are available from Metav Werkzeuge to ensure the choice matches the required inspection standards. Choose the SCHWEIZER Tech‑Line hand magnifier for dependable close‑up inspection and contact Metav Werkzeuge for product guidance or to place an order at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000851695NW Type: Tech‑Line Product: Hand magnifier Label: Handlupe Tech‑Line Vergr. 8x Linsen‑D.28mm Schweizer Brand: SCHWEIZER Packaging unit: 1 UID: 4000851695NW Core data Magnification: 8× Packaging unit: 1 Design & features Metal handle Tech‑Line series Hand magnifier Brand SCHWEIZER FAQ What level of enlargement does the magnifier provide? The Hand magnifier Tech‑Line from SCHWEIZER offers 8× magnification, which makes small features clearly visible for inspection and assembly tasks. Is the handle suitable for heavy workshop use? Yes, the metal handle is designed for robust everyday use and gives a firm grip suited to repeated handling in workshop environments. Can the magnifier be used alongside microscopes or precision calipers? The Tech‑Line hand magnifier complements microscopes and precision calipers by offering quick visual checks before or after dimensional measurement with a precision caliper. How should the lens be cleaned to maintain clarity? Clean the lens of the SCHWEIZER hand magnifier with a soft, lint‑free cloth and a mild lens cleaner; avoid abrasive materials to preserve the optical surface. Is this magnifier suitable for inspecting electronic solder joints? Yes, the 8× magnification of the Tech‑Line magnifier is appropriate for solder joint inspection and similar fine electronic assembly tasks. Manufacturer: SCHWEIZER; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of versatile zoom, robust illumination and a long working distance to speed up inspection and documentation workflows. Order the NexiusZoom directly via Metav Werkzeuge or ask their consultants for tailored advice. NexiusZoom NZ.1903-P – Trinocular Stereomicroscope with 6.7×–45× Zoom and 3 W LED Illumination (Euromex) The NexiusZoom is a trinocular stereomicroscope engineered for precise inspection, component assembly checks and photodocumentation in laboratories and quality control environments. Trinocular head for camera attachment Zoom 6.7×–45× for versatile magnification Integrated 3 W LED top and transmitted light Long 110 mm working distance for larger samples Anti-fungal, anti-reflection planachromatic optics Faster detection from overview to fine detail The combination of a Zoom 6.7×–45× range and the 0.67×–4.5× objective enables rapid transitions between low-power overview and high-detail inspection without changing objectives. The instrument’s zoom ratio 1:6.7 reduces handling time and supports continuous observation, which is particularly beneficial when checking assemblies or sorting components. The planachromatic optics ensure a flat, well-corrected image across the field, so edge detail and surface texture remain sharp throughout the zoom range, reducing misinterpretation and rework. Consistent illumination that supports documentation With both 3 W LED incident and transmitted lighting, each adjustable independently, the microscope delivers stable, flicker‑free illumination suited to high-contrast inspection and image capture. The lights can be switched on simultaneously for bright-field or combined contrast techniques, improving visibility of surface relief and defects. Anti-reflective coatings and anti-fungal treatment on the optical surfaces preserve contrast and reduce maintenance intervals, supporting reproducible photographic records for quality documentation. Ergonomics and camera-ready features for everyday use A trinocular head with a 50:50 beam splitter allows simultaneous eyepiece observation and camera attachment for live imaging or archived documentation. Comfortable viewing is supported by a 45° viewing angle, an eyepiece magnification of 10× HWF with a 22 mm field, and diopter compensation from −5 to +5 dpt. The broad interpupillary range (54–75 mm) and 110 mm working distance accommodate larger samples and handheld tooling during inspection, improving operator comfort and throughput in repetitive tasks. Robust build for continuous industrial use The instrument sits on a hardened, metal‑cast column stand engineered for stability during manipulation and measurement. Integrated features such as the Kensington security slot and an internal power supply (100–240 V AC) reflect an emphasis on secure, continuous operation in a shared workshop environment. A comprehensive 10-year warranty underlines long-term reliability and low total cost of ownership, helping to ensure consistent metrology outcomes and minimal downtime. Contact Metav Werkzeuge for tailored technical advice on the NexiusZoom by Euromex and how it can be integrated into existing inspection workflows — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: NZ.1903-P Manufacturer: Euromex Model series: NexiusZoom Product type: Stereomicroscope Head: Trinocular Stand: Column stand Dimensions: 299 mm (H) × 256 mm (W) × 311 mm (D) Weight: 5.2 kg Facts Magnification: 6.7×–45× Objective zoom: 0.67×–4.5× Zoom ratio: 1:6.7 Working distance: 110 mm Eyepiece magnification: 10× (HWF), field number 22 mm Diopter range: −5 to +5 dpt Pupillary distance: 54–75 mm Field of view: 4.9–32.8 mm Illumination power: 3 W (top) + 3 W (transmitted) Special features Planachromatic objective correction Anti-fungal and anti-reflective coated optics Fixed beam splitter 50:50 Brightness adjustable; top and transmitted independent Simultaneous top and transmitted illumination possible Internal power supply 100–240 V AC Kensington security slot Hardened coated metal-cast column stand Included: 2 × 10×/22 mm HWF eyepieces; 2 × specimen clamps Manufacturer warranty: 10 years FAQ What magnification range does the microscope cover? The NexiusZoom stereomicroscope (NZ.1903-P) provides a magnification range from 6.7× to 45×, driven by an objective zoom of 0.67×–4.5×. Can the instrument be used for photodocumentation? Yes. The trinocular head and 50:50 beam splitter allow simultaneous eyepiece observation and camera connection, making the system suitable for live imaging and archived documentation. How suitable is the instrument for inspecting larger components? The 110 mm working distance gives ample space for larger samples and for using small tools during inspection, improving handling and assembly checks. Are the illumination sources adjustable for contrast techniques? Both the incident and transmitted 3 W LED units are brightness adjustable and can be used independently or together, supporting a range of illumination contrasts. What assurances exist for long-term use? Euromex supplies a 10-year warranty for this stereomicroscope, reflecting designed durability and reduced lifecycle costs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

2x Vorsatzlinse (w.d. 26mm)

2x-4x SLX-1 Cordless binocular stereomicroscope