Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
12.99mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a compact 12.99 mm reference pin with ±0.002 mm tolerance and a robust special steel finish to secure repeatable end‑dimension checks. Supplied in a transport case for protected handling, this workshop‑grade gauge pin can be ordered directly via Metav Werkzeuge or discussed with our consultants for batch or inspection advice. Metav IndustryLine Gauge Pin (single) — 12.99 mm diameter, 50 mm length The Gauge pin, single, 12.99 mm, 50 mm length is a precision reference pin designed for reliable end‑dimension inspection and compact workshop measurement tasks Diameter 12.99 mm for precise end measurements Length 50 mm for compact inspection tasks Tolerance ±0.002 mm ensures repeatable results Workshop version, supplied in transport case Reliable dimensional reference for workshop inspection A compact reference pin with a 12.99 mm diameter and a measured accuracy of ±0.002 mm provides a dependable benchmark for end‑dimension verification. In applications where final fits or mating parts are critical, the tight tolerance reduces uncertainty and supports consistent quality control. This level of precision minimises the need for rework by ensuring that measured components meet specification immediately, which in turn improves throughput and reduces inspection time. Built for consistent performance and straightforward handling Manufactured from special steel, the pin combines wear resistance with dimensional stability under normal workshop conditions. Its 50 mm length makes it ideal for confined inspection areas and for use in jigs, fixtures or manual gauging routines; the compact form is easy to position and reduces the effect of operator handling on the result. The workshop version construction balances robustness with practicality, offering a durable tool that remains simple to use during routine checks and occasional calibration cycles. Protected delivery and traceable identification for production workflows The item is supplied as a single unit and arrives in a protective transport case to prevent damage during handling and storage, supporting reliable availability on the shop floor. Identification by SKU M323.C99 and GTIN: 4061905067136 enables straightforward inventory control and traceability within procurement and inspection records. The combination of precise specification, a hardened material finish and secure packaging supports reproducible measurement routines and helps integrate the pin into established quality processes. Contact Metav Werkzeuge to specify quantities, request technical clarification or arrange delivery for the Metav IndustryLine gauge pin M323.C99 with 12.99 mm diameter Technical data Article number: M323.C99 GTIN: 4061905067136 SKU: M323.C99 Core specifications Diameter: 12.99 mm Length: 50 mm Tolerance / Accuracy: ±0.002 mm Weight: 0.1 kg Materials & features Material: Special steel Workshop version Supplied in transport case Category: Gauge pin FAQ What is the nominal diameter of this gauge pin? The nominal diameter of the Metav IndustryLine gauge pin M323.C99 is 12.99 mm. How precise is the gauge pin for end‑dimension checks? The gauge pin is specified with an accuracy of ±0.002 mm, making it suitable for precise end‑dimension verification. What material is the pin made from? The pin is manufactured from special steel, chosen for wear resistance and dimensional stability in workshop environments. Is the pin supplied ready for use and protected in transit? Yes, the gauge pin is supplied as a single unit and delivered in a protective transport case to prevent handling damage. Can this pin be recorded in inventory and traceability systems? Yes; the product can be tracked using SKU M323.C99 and GTIN 4061905067136 for procurement and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.9mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
The compact combination of a 12.9 mm diameter, 50 mm length and a tight ±0.002 mm tolerance ensures repeatable end-dimension checks in workshop environments; secure this reliable inspection component through Metav Werkzeuge or consult their specialists for application advice. Test pin (single) – 12.9 mm diameter, 50 mm length by Metav IndustryLine Test pin for precise end-dimension inspection and workshop gauging applications Precision diameter 12.9 mm 50 mm hardened length for stable support Accuracy ±0.002 mm Special steel workshop design Repeatable results for small components The compact gauge is engineered for consistent inspection of end dimensions where tight tolerances matter. With a 12.9 mm measuring diameter and a declared ±0.002 mm deviation, the pin functions as a reliable reference in production controls and receiving inspections. The small form factor suits tasks that require repeatability rather than long reach, reducing error sources from handling and ensuring that each measurement contributes to verifiable quality documentation. Robust design for everyday workshop use Built as a workshop version, the component combines wear resistance and handling strength. The special steel composition provides improved surface hardness and resistance to frequent seating and removal, which reduces downtime for replacements. For machinists and quality technicians this translates into a lower total cost of ownership: fewer replacements and consistent contact geometry for quicker, more dependable checks during batch processing. Stable handling and measurement stability A 50 mm shank length offers a balance between usability and support: long enough for a secure grip in fixtures, yet short enough to keep bending and vibration to a minimum during tactile or fixture-mounted checks. The geometry promotes stable seating in gauges and ensures the contact surface remains perpendicular to the inspection plane, helping technicians achieve consistent results with minimal setup time. Ideal for micro‑range metrology tasks Classified in the micro range (measuring range up to 100 mm), this inspection element is aimed at fine mechanical work such as small assemblies, fixtures and precision components. Its compact footprint and precision rating make it suitable as a workshop standard for routine end‑dimension verification where space and handling convenience matter more than extended reach. For tailored advice or to obtain the Metav IndustryLine test pin M323.C90 for dependable end-dimension checks, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for availability and application support Technical data Article number: M323.C90 GTIN: 4061905066139 Manufacturer: Metav IndustryLine Diameter: 12.9 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Material: Special steel Version: Workshop execution Category: Gauge pin (Messstifte) eClass: 21170231 FAQ What is the declared tolerance of this inspection pin? The Test pin from Metav IndustryLine (M323.C90) is specified with an accuracy of ±0.002 mm, allowing for very fine end-dimension checks in workshop environments. Is the test pin suitable for fixture-mounted gauges? Yes. The 50 mm length and stable shank geometry make the Metav IndustryLine test pin appropriate for use in fixture-mounted or handheld gauge assemblies where a rigid reference is required. Which materials is the pin made from and what does that mean for wear? The test pin is manufactured from special steel, chosen for improved surface hardness and wear resistance, which extends service life under frequent seating and removal cycles. Can this pin be used for large-scale measurements? This component is designed for the micro range (measuring range up to 100 mm) and is optimised for small to medium components; it is not intended for long-reach measurements where larger gauges or alternative systems are preferable. How does the workshop version differ from lab-grade pins? The workshop execution emphasises robustness and practical handling for daily shop use; while it maintains high precision, the design prioritises durability and ease of use over features found in delicate laboratory instruments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precise tolerance control (±0.002 mm) and a robust special‑steel construction for reliable end‑measure checks; the compact 50 mm length ensures convenient handling in confined inspection setups. Order the gauge pin directly via Metav Werkzeuge or consult our technical advisors for application support. Gauge Pin M323.C00 – 12.00 mm Ø, 50 mm Length (Metav IndustryLine) The gauge pin M323.C00 is a single inspection pin designed for accurate end‑measure verification and fit testing in workshop and inspection environments. Precision tolerance ±0.002 mm Special steel for wear resistance 12.00 mm nominal diameter 50 mm overall length Precision for repeatable end‑measure checks A compact inspection tool with ±0.002 mm tolerance, this gauge pin delivers measurable improvements in quality control where small deviations matter. The nominal 12.00 mm diameter and a 50 mm overall length make the pin particularly suitable for end‑measure verification of mating parts, plug gauges and bore checks. By reducing measurement uncertainty, the pin supports reproducible pass/fail decisions in incoming inspection and in‑process control, helping to avoid costly rework. Workshop‑grade durability and straightforward handling Built in a workshop execution, the pin is machined from special steel to withstand repeated use in busy fabrication and assembly areas. The compact dimensions reduce bending risk during manual handling and storage, while the robust material improves wear resistance under frequent contact. Lightweight and easy to position, the pin enables fast tactile checks without complex fixtures, making routine inspections quicker and less error‑prone. Integrating the pin into inspection routines This inspection pin integrates seamlessly into standard metrology workflows as a reference for functional fits and clearance checks. Marked by a clear SKU and GTIN for traceability, the component is suitable for use in conveyor‑based quality stations and manual inspection benches alike. For organisations seeking consistent workmanship, the pin functions as a simple, low‑cost element that stabilises measurement routines and supports documented quality checks. For workshop‑ready precision from Metav IndustryLine, order the M323.C00 gauge pin via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.C00 GTIN: 4061905064319 Weight: 0.1 kg Facts Nominal diameter: 12.00 mm Length: 50 mm Tolerance: ±0.002 mm Material: Special steel Special features Workshop version Single inspection pin Category: Gauge pins / inspection pins FAQ What is the primary application for this inspection pin? The gauge pin M323.C00 is intended for end‑measure verification, fit testing and simple bore checks in workshop and inspection environments. Is the tolerance suitable for fine mechanical work? Yes, with a tolerance of ±0.002 mm the pin fits precision inspection tasks where small deviations affect assembly or function. Which materials is the pin compatible with during inspection tasks? The pin itself is made from special steel; it is used as a reference element for parts made from metals and alloys in standard inspection procedures. Can this pin be used in automated checking stations? Yes, the compact dimensions and clear identification make the pin suitable for integration into conveyor or manual inspection stations as a reference gauge. How should the pin be stored to preserve accuracy? Store the pin in a clean, dry environment and protect it from impacts and corrosive agents to maintain surface condition and dimensional stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12mm Test Pins Set With Holder And Inspection Inserts, Delivered In Tool Trolley - Filetta
Take advantage of precise, repeatable inspection with a comprehensive set that combines hardened steel durability, fine 0.01 mm graduation and clear transport/storage in a tool trolley with a conformity certificate; order the set directly via Metav Werkzeuge or consult our specialists for application advice. Gauge Pin Set MS910.460 — hardened steel, 0.5–12 mm, Filetta The Gauge Pin Set MS910.460 is a complete inspection kit of precision gauge pins for workshop and production metrology, designed for routine go/no‑go checks, dimensional verification and assembly control Extensive set: 1151 gauge pins 0.5–12 mm Hardened steel for high wear resistance 0.01 mm graduation for precise selection Supplied in trolley with conformity certificate Reliable precision for repetitive inspection This set delivers high precision across a broad micro range, covering 0.5–12 mm with a graduation of 0.01 mm, which supports fine incremental selection during inspection procedures. The measured accuracy of 0.002 mm provides a verifiable basis for routine quality checks and contributes directly to stable production outcomes. Using hardened components reduces wear, so nominal sizes remain consistent over repeated use, limiting rework and saving time in the measurement chain. Designed to streamline workshop workflows Presented as a full kit in a purpose‑fitted tool trolley, the collection of pins is organised in individual plastic containers with size marking for rapid retrieval and immediate traceability. The integrated holders with good/reject indication simplify visual sorting and speed up go/no‑go decisions at the bench. These layout and handling choices reduce operator time per check and improve throughput without compromising measurement reliability. Robust handling with traceable conformity Constructed from hardened steel and supplied with a conformity certificate, the set emphasises longevity and documented quality assurance. Individual containers protect each gauge pin from contamination and damage, while the trolley format supports safe transport and tidy storage. The combination of durable materials and documented conformity helps maintain audit readiness and supports consistent measurement results across shifts. Versatile applications across metrology tasks Suitable for inspection, assembly verification and gauge‑based calibration work, the collection is tailored to routine tasks in production, toolmaking and inspection labs. The fine step size enables close fit control and small‑feature checks, while the extensive count of pins in the set covers a wide range of nominal sizes without the need for multiple purchases. The format is particularly useful where rapid switching between sizes and clear go/no‑go indication are required. For hands‑on advice or to secure the Filetta Gauge Pin Set MS910.460 for a stable inspection routine, contact Metav Werkzeuge — our consultants provide practical application support from Emmerich and ensure timely supply to the workshop. Technical data Article number: MS910.460 Name: Gauge pin set Manufacturer: Filetta Material: hardened steel Set: yes Accessories included: 3x holders with good/reject indicator Supplied: tool trolley with conformity certificate Packaging: pins in individual plastic containers with size marking Facts Measurement range: 0.5–12 mm Measurement increment: 0.01 mm Accuracy (nominal): 0.002 mm Pieces per set: 1151 Weight: 63 kg Dimensions (L×W×H): 670×350×540 mm Special features Hardened steel construction Individual marked containers for each pin Tool trolley delivery for transport and storage Conformity declaration included Holders with go/no‑go indicator included FAQ How fine are the increments in the set? The set provides a 0.01 mm graduation between sizes, enabling fine selection for close tolerance checks with the Gauge Pin Set MS910.460. Is the set suitable for repeated industrial use? Yes, the hardened steel pins and protective individual containers make the filetta gauge pin set appropriate for frequent workshop and production use. Does the delivery include documentation? Delivery includes a conformity certificate; the Gauge Pin Set MS910.460 is supplied with documentation confirming its compliance. Can the set be used for calibration tasks? The wide range and fine graduation allow the set to be used for inspection and informal calibration verification; for certified calibration procedures, refer to your internal quality protocols. What accessories come with the set? The set contains three holders with good/reject indication and all pins are housed in individual marked containers within the supplied trolley. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
12–13mm Gauge Pin Set 101 Pieces 0.01mm Increments With Pin Holder, Supplied in Case - Metav IndustryLine
Take advantage of precise batch inspection and consistent traceability thanks to the 101-piece configuration and fine 0.01 mm graduations; the set combines high repeatability and robust construction to streamline in‑house checking routines. Order the gauge pin set directly via Metav Werkzeuge or consult the Metav team for any specification clarification. Gauge pin set M318.582 – 101 pcs, 12–13 mm, 0.01 mm increments (Metav IndustryLine) The gauge pin set M318.582 is a compact metrology kit designed for precise plug measurements and fit checks in inspection benches and toolrooms. 101-piece precision set 0.01 mm incremental steps Special steel construction Integrated pin holder for handling Precision where batch compliance matters The set is designed for routine dimensional control and calibration work, offering a dense range between 12.0–13.0 mm with 0.01 mm steps that simplify fine adjustments and gap verification. With a stated measurement accuracy of 0.004 mm, the pins give a reliable reference for checking fits, plug gauges and bore sizes where small deviations impact assembly tolerances. The compact gradation density reduces time spent searching for the right size and supports faster decision-making on the shop floor. Emphasis on measurable performance and reproducible results positions the kit as a tool for quality assurance workflows and incoming inspection processes. Robust handling and ergonomic use for everyday inspection Manufactured from special steel, the pins resist wear in repetitive use and provide stable edges for contact measurements. The inclusion of an integrated pin holder improves handling and speeds up pin changes, lowering the risk of finger marks or damage and helping to maintain the nominal dimensions over time. The set format is particularly useful in toolrooms and service departments where a complete size range is required for trial fitting, gaging blocks, or fixture set-up. The construction supports consistent mechanical contact and good repeatability, which reduces rework and contributes to a smoother production flow. Traceability, stock control and workshop integration Supplied as a 101‑piece set, this kit is ideal for workshops that require clear inventory management and traceable references. The set is listed under SKU M318.582 and GTIN 4054469156194 for straightforward procurement and stock keeping. At a weight of 8.1 kg and a compact nominal length per pin, the collection is durable for daily use and straightforward to store in a metrology cabinet. Choosing this Metav IndustryLine solution aligns with a strategy of reliable supply and accessibility: Metav’s Emmerich hub acts as a quality filter for the European market, ensuring consistent availability and a broad spare-parts network for professional environments. Choose the Metav IndustryLine gauge pin set M318.582 for precise plug measurements and request tailored advice from Metav Werkzeuge for fast, reliable supply from Emmerich Technical data SKU: M318.582 GTIN: 4054469156194 ECLASS: 21170231 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Pieces per set: 101 Measuring range: 12.0–13.0 mm Increment: 0.01 mm Accuracy: 0.004 mm Weight: 8.1 kg Length: 50 mm Special features Material: Special steel With pin holder Set version FAQ What accuracy and resolution can be expected from the set? The gauge pin set M318.582 (Metav IndustryLine) provides increments of 0.01 mm with a stated measurement accuracy of 0.004 mm, suitable for precise fit checks and fine adjustment work. Which materials are the pins made from and how does that affect use? Pins are manufactured from special steel; this choice improves wear resistance and dimensional stability during repeated contact measurements and typical workshop handling. Is the kit suitable for fixture and gauge set-up tasks? Yes, the 101-piece configuration covers the 12.0–13.0 mm range in 0.01 mm steps, making it well suited for fixture alignment, trial fits and inspection of mating parts. What handling advantages does the set offer? The integrated pin holder facilitates safe and efficient pin changes, reduces handling time and helps protect the pin ends from accidental damage. How can the set be referenced in procurement and inventory systems? Use SKU M318.582 and GTIN 4054469156194 to track the set in purchasing systems and maintain traceability within quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12–16.5mm Probe Holder With Good/Reject Indication - Metav IndustryLine
Secure consistent pass/fail handling in inspection by combining compatibility with 12.0–16.5 mm probe pins and a clear 'GOOD'/'REJECT' marking, while the compact 150 mm format and 0.2 kg weight keep fixtures light and manageable. Order the probe pin holder directly via Metav Werkzeuge or ask our consultants for integration advice. Probe Pin Holder M318.564 – for 12.0–16.5 mm probe pins with 'GOOD'/'REJECT' marking (Metav IndustryLine) A probe pin holder M318.564 designed for secure mounting in inspection gauges and measuring fixtures, providing unambiguous pass/fail labelling for rapid quality control. For probe pins 12.0–16.5 mm Clear "GOOD"/"REJECT" inspection marking Robust holder for inspection gauges Compact 150 mm length, 0.2 kg weight Faster decisions with unambiguous inspection marking The integrated 'GOOD'/'REJECT' marking removes hesitation at the inspection station and accelerates sorting processes without additional labelling steps. Clear visual identification supports higher inspection throughput and reduces human error during repetitive checks. This benefit is particularly relevant in batch testing and inline quality control, where rapid, reproducible decisions lower cycle times and limit rework. Precise fit for probe pins and fixtures Designed to accept probe pins from 12.0–16.5 mm, the holder provides a reliable seating that minimises radial play and improves positional repeatability. The accurate fit ensures that contact points remain stable under repeated use, which in turn preserves measurement consistency across inspection runs. With a compact length of 150 mm and a mass of 0.2 kg, the component is easy to integrate into existing jigs and does not unduly alter fixture dynamics. Built for reliable workshop integration The component is intended for use in inspection jigs and measuring setups where fast identification and steady mounting matter. Its straightforward geometry allows quick installation into existing gauges and supports consistent alignment of probe pins during measurement cycles. Backed by the Metav IndustryLine standard of supply, the holder helps maintain steady part flow in production environments while supporting traceable inventory through its GTIN and tariff classification. Choose Metav IndustryLine's probe pin holder M318.564 for a streamlined inspection workflow; contact Metav Werkzeuge in Emmerich for technical guidance and dependable supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M318.564 GTIN: 4054469167152 Manufacturer: Metav IndustryLine Facts Weight: 0.2 kg Length: 150 mm Suitable for probe pins: 12.0–16.5 mm Special features 'GOOD' / 'REJECT' inspection marking Intended for inspection gauges and measuring fixtures Category: Measuring pins / gauges FAQ What probe pin diameters does the holder accept? The holder is compatible with probe pins sized 12.0–16.5 mm, providing a secure seating for these diameters in inspection fixtures. Can the holder be mounted in existing inspection jigs? Yes, the holder is designed for straightforward integration into gauge assemblies and measuring fixtures; the compact profile and 150 mm length simplify retrofitting. Does the marking support rapid sorting in production? The 'GOOD'/'REJECT' marking on the holder enables unambiguous visual sorting at the inspection station, helping to speed decision-making and reduce sorting errors. Is the product traceable for inventory and customs? The product is traceable via GTIN 4054469167152 and is assigned tariff code 90173000 for customs and inventory handling. Which brand produces this holder and what is the SKU? This probe pin holder is supplied under Metav IndustryLine and is listed as SKU M318.564 in the product range. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13 mm Test Pin Length 50 mm Workshop Version - Metav IndustryLine
Take advantage of a workshop-grade gauge pin that pairs compact dimensions with high repeatability: a 13.00 mm diameter and a 50 mm shaft length, manufactured from special steel with a tolerance of ±0.002 mm. Order the part directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.D00 by Metav IndustryLine — 13.00 mm diameter, 50 mm length A gauge pin M323.D00 designed as a workshop-grade 13.00 mm diameter test pin for end‑measurements and fit checks. Workshop-grade construction for robust use Diameter 13.00 mm with ±0.002 mm tolerance 50 mm length for end‑measurements and fit checks Precision where small tolerances matter This compact gauge pin delivers measurable reliability for inspection and go/no-go fit tests. The nominal 13.00 mm diameter combined with a verified ±0.002 mm tolerance ensures consistent contact geometry when measuring bores, seats or mating parts. Made from special steel, the pin resists wear in continuous use and keeps calibration drift to a minimum — a clear rational advantage for quality control processes that require repeatable results rather than occasional checks. Ideal for micro-range measurement tasks Classified in the micro segment for gauges between 10–100 mm, this test pin suits fine mechanical environments where short, stiff measuring elements are preferred. The compact 50 mm shaft length provides good handling and minimal bending under modest manual use, improving measurement repeatability in workshops, tool rooms and assembly benches. This balance of reach and rigidity reduces handling errors and speeds up routine inspection tasks. Robust handling and transport-ready delivery Built as a workshop‑execution item, the pin is finished for practical use rather than delicate laboratory handling, so it stands up to daily operations. Delivery includes a transport case to protect the pin during storage and transit, which helps preserve the gauge’s geometry between uses. At a mass of approximately 0.1 kg, it is easy to position while offering enough substance to feel precise in the hand — a tactile reassurance that complements technical accuracy. Practical use and traceability for production workflows The single-pin format supports end‑measurements, plug checks and assembly verification without the complexity of compound gauges. As a straightforward inspection tool it integrates into existing measurement routines and can be recorded in quality documentation for traceability. The product’s identification (GTIN and SKU) enables straightforward procurement and inventory control within a parts management system, helping to maintain steady throughput in production environments. Contact Metav Werkzeuge for purchasing and application support: Metav IndustryLine items are stocked in Emmerich and are available with procurement advice to match inspection needs — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.D00 GTIN: 4061905067143 Manufacturer: Metav IndustryLine Numbers / Core technical data Diameter: 13.00 mm Shaft length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features / Versions Material: special steel Workshop execution Single gauge pin for end‑measurements Delivered in transport case FAQ What is the nominal diameter and tolerance of this gauge pin? The gauge pin has a nominal diameter of 13.00 mm with a tolerance of ±0.002 mm, suited for precision fit checks. Is the pin supplied ready for transport and storage? Yes, the M323.D00 is delivered in a transport case to protect geometry during storage and transit. What applications suit this gauge pin best? The pin is intended for end‑measurements, plug checks and simple fit verification in workshop and assembly environments, especially where compact, stiff measuring elements are preferred. Which material is used for the gauge pin and how durable is it? Manufactured from special steel, the pin offers good wear resistance for frequent inspection cycles in a workshop setting. How can the M323.D00 be ordered or specified for procurement? Order using the article number M323.D00 or GTIN 4061905067143; Metav Werkzeuge can provide procurement and application guidance. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13,01- 14,00mm Messstift-Sätze, Werkstatt-Ausführung, ± 0,004 mm
- aus Spezial-Stahl Werkstatt-Ausführung, Länge 50 mm Genauigkeit < ± 0,004 mm im Behältnis/KastenTechnische Daten- Messbereich: 13,01- 14,00mm- Stufung: 0,01mm- Anzahl/Satz: 100
13-14mm Go/No-Go Gauge Pin Set With Pin Holder 0.01mm Steps In Plastic Case - Metav IndustryLine
Take advantage of a compact, 101-piece kit that delivers repeatable inspection across the 13.00–14.00 mm range with 0.01 mm graduations and nominal accuracy of ±0.004 mm — a practical combination of precision, robustness and workshop usability. Order the set via Metav Werkzeuge or consult our specialists for application-specific advice. Gauge pin set, 101-piece, 13.00–14.00 mm, 0.01 mm step (Metav IndustryLine) Gauge pin set for precision hole and gauge inspection in workshop and quality environments 101-piece precision set 0.01 mm graduation steps 13.00–14.00 mm measuring range Made from special steel Consistent measurement where it counts The 101-piece kit is organised to provide fine incremental coverage across a narrow band, enabling rapid selection of the correct pin for go/no-go checks and bore verification. With 0.01 mm steps and an indicated accuracy of ±0.004 mm, the set supports reliable comparison measurements and fast pass/fail decisions on production lines. The compact increments reduce downtime when matching nominal sizes, delivering a measurable improvement in inspection throughput and first-pass yield. Practical handling and faster inspection routines A dedicated gauge pin holder simplifies handling and reduces the time spent swapping individual pins during multi-point checks. The pins are finished from special steel, giving consistent surface quality and resistance to routine workshop wear; this supports repeatable contact points and stable measurement reference. The organised kit layout and clear graduation minimise handling errors and accelerate inspection cycles in assembly, jigs and toolrooms. Built for workshop conditions and traceable results The robust kit is suited to demanding environments: the material choice and manufacturing tolerances lead to a durable inspection set that remains serviceable over long production runs. The comprehensive coverage between 13.00 mm and 14.00 mm eliminates the need for multiple partial sets, enabling a single kit to cover a range of fits and clearances. Where traceability of measurements is required, the nominal accuracy of ±0.004 mm gives a clear performance benchmark for QA documentation. Typical applications and compatibility This pin gauge collection is intended for routine bore checking, gauge setting, inspection fixtures and quick verification of mating parts during assembly. The incremental steps make it suitable for fine-adjustment tasks and set-up work in machining centres, inspection benches and toolmaking. The kit’s weight and scope reflect its workshop focus: a comprehensive, ready-to-use solution for small-range precision checks. Secure the Metav IndustryLine gauge pin set to standardise inspection routines; contact Metav Werkzeuge for application guidance and delivery from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: M318.583 GTIN: 4054469156200 Manufacturer: Metav IndustryLine Facts Measuring range: 13.00–14.00 mm Graduation: 0.01 mm Accuracy: ±0.004 mm Pieces per set: 101 Pin length: 50 mm Weight: 9 kg Tariff number: 90173000 Special features Material: special steel Includes gauge pin holder Graduated set for fine incremental measurement FAQ What level of tolerance is provided by the kit? The gauge pin set provides a nominal accuracy of ±0.004 mm, with 0.01 mm graduation steps across the 13.00–14.00 mm range for consistent workshop checks. Is the set suitable for production-line inspection? Yes; the 101-piece pin gauge kit is arranged for rapid selection and repeated use, making it appropriate for production and assembly inspection tasks. How are the pins presented and handled during inspection? Pins are supplied as a complete, organised set with a gauge pin holder to simplify handling and speed up multi-point checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13-20 mm Probe Holder With Good/Reject Indication - Metav IndustryLine
Take advantage of a compact, lightweight holder that secures standard gauge pins from 13 to 20 mm and provides clear Good/Reject visual identification for faster inspection throughput; order or request advice through Metav Werkzeuge for reliable supply and expert support. Measuring pin holder M318.560.1 — holder for 13–20 mm gauge pins with Good/Reject marking (Metav IndustryLine) The measuring pin holder M318.560.1 secures gauge pins from 13 to 20 mm for rapid go/no‑go checks in production and inspection environments. Fits 13–20 mm gauge pins Clear "Good" / "Reject" visual marking Compact design with 113 mm length Faster go/no‑go decisions on the inspection bench The holder is designed to streamline routine checks by keeping a gauge pin securely positioned for immediate comparison — a practical aid for repetitive inspections that require unambiguous outcomes. With the integrated Good/Reject marking, the device supports quick visual sorting and reduces decision latency on the line. The unit’s compact footprint helps maintain a concise inspection station while improving throughput and reducing the risk of misclassification during mass checking. Compact form for tight workspaces and consistent handling At 113 mm overall length and weighing just 0.1 kg, the holder fits into constrained test setups without adding bulk or obstructing adjacent fixtures. The compact geometry promotes consistent seating of the measuring pin, which contributes to repeatable measurements and fewer retests. Designed for compatibility with standard gauge pins, the accessory aids ergonomic handling and can be integrated into bench jigs or simple fixture arrangements to shorten cycle time. Traceability and workflow integration for quality systems Marked as SKU M318.560.1 and identifiable by GTIN 4054469178578, the holder can be logged in inspection protocols and inventory systems for traceable tooling management. Its clear visual coding supports standardised go/no‑go procedures and helps maintain an auditable record of sorting decisions. The accessory is suitable for use in production inspection, incoming goods checks and quick process controls where rapid, reproducible classification of parts is required. For reliable, rapid go/no‑go inspection choose the Metav IndustryLine measuring pin holder M318.560.1 — contact Metav Werkzeuge for product guidance and prompt dispatch from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M318.560.1 GTIN: 4054469178578 Manufacturer: Metav IndustryLine Weight: 0.1 kg Length: 113 mm Customs tariff number: 90173000 Suitable for gauge pins 13–20 mm Visual Good/Reject marking Categories: Messstifte, Lehren FAQ How is the holder used for go/no‑go checks? The holder positions a gauge pin so that parts can be compared visually or by contact; the integrated Good/Reject marking allows immediate classification without complex setup. Which pin sizes are compatible with this accessory? Compatibility is for gauge pins from 13 to 20 mm as specified for the measuring pin holder M318.560.1. Is the holder suitable for use in small inspection stations? Yes — the compact 113 mm length and low weight make the holder well suited to constrained benches and simple fixture layouts. Can the holder be logged for traceability in quality systems? Yes — the accessory is identified by SKU M318.560.1 and GTIN 4054469178578 for inventory and documentation purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.01mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
The combination of a precisely machined 13.01 mm diameter, a tight ±0.002 mm tolerance and a compact 50 mm length makes this inspection pin ideal for reproducible end-measurements and fast setup checks; order the M323.D01 gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.D01 Gauge pin – 13.01 mm diameter, 50 mm length (Metav IndustryLine) The M323.D01 gauge pin is a workshop-grade inspection pin designed for precise end-measurements and reference checks in metrology and quality control applications. Precision diameter 13.01 mm Tight tolerance ±0.002 mm Workshop-grade special steel finish Single-piece design for consistent reference Measure and verify with industrial precision Engineered for consistent reproducibility, this inspection pin delivers a 13.01 mm nominal diameter with a verified ±0.002 mm variation, making it suitable for fine tolerance checks and reference gauging. The tight tolerance reduces uncertainty during setup and minimises iterative adjustments, which in turn streamlines inspection cycles. The dimensional control is expressed in clear numerical terms to support statistical process control and quick Go/No‑Go comparisons. Practical design for everyday workshop use With a 50 mm length and a compact form factor, the pin fits common test fixtures and small-bore gauges without compromising handling. The special steel construction offers reliable surface integrity for repeated contact measurements while the single-piece format keeps inventory simple and inspection points consistent. Its modest weight contributes to comfortable manual handling and fast repositioning during batch checks, supporting efficient throughput in production and service workshops. Traceability and workshop integration Delivered as an individual inspection pin and identified by SKU M323.D01, this component integrates easily into existing inspection ranges and catalogues. The clear GTIN and SKU labelling help maintain traceability in stores and inspection logs, while the Metav IndustryLine positioning ensures access to technical documentation and matching accessories. Metav’s role as a precision partner means established supply chains and practical advice are available for selecting complementary gauges or setting up fixture points. Contact Metav Werkzeuge today to request the M323.D01 gauge pin for your measurement bench, or arrange a technical consultation by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.D01 GTIN: 4061905067150 Manufacturer: Metav IndustryLine Numbers / core technical data Nominal diameter: 13.01 mm Length: 50 mm Tolerance / variation: ±0.002 mm Weight: 0.1 kg Designs / special features Material: special steel Delivery form: single inspection pin Intended use: end-measurements and reference checks Product category: gauge pin / inspection pin FAQ What is the exact diameter and tolerance of this inspection pin? The M323.D01 inspection pin has a nominal diameter of 13.01 mm with a manufacturing variation of ±0.002 mm. Which material is used for the pin? The pin is manufactured from special steel, chosen for consistent surface quality and dimensional stability under normal workshop use. For which applications is this gauge pin suitable? This pin is intended for end-measurements, reference checks and small-bore verification in workshop and quality-control environments. Is the pin supplied individually or as a set? The product is supplied individually as a single inspection pin, suitable for direct use or integration into bespoke fixture sets. How can the pin be identified for inventory and traceability? Identification is via SKU M323.D01 and GTIN 4061905067150, which support catalogue management and traceability in inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.03mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
A compact, workshop-grade gauge pin offering ±0.002 mm tolerance in special steel, with a nominal diameter of 13.03 mm and a length of 50 mm for repeatable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or consult our technical team for application advice. Gauge pin, single Ø 13.03 mm — 50 mm length (Metav IndustryLine) Gauge pin, single Ø 13.03 mm — 50 mm length is a workshop‑grade inspection pin designed for precise bore checking and end‑measurement tasks in metalworking and assembly environments. Precision manufacturing ±0.002 mm tolerance Diameter Ø 13.03 mm, length 50 mm Hardened special steel construction Workshop‑grade single inspection pin Consistent reference for bore and end measurements The gauge pin provides a stable reference for checking hole diameters and end faces thanks to its Ø 13.03 mm nominal dimension and ±0.002 mm tolerance. Manufactured to tight limits, the component reduces uncertainty in pass/fail checks and supports reproducible quality control. In practical terms, this accuracy level means fewer rechecks and faster verification cycles when validating fit or alignment during assembly and inspection tasks. Built for the workshop — durable yet manageable Engineered as a workshop‑grade tool, the pin combines robust special steel construction with a compact 50 mm length that is easy to handle at the bench. The choice of material and heat treatment ensures resistance to wear during routine use while keeping the part manageable for single‑hand operation. The robust design balances longevity with low maintenance, making it suitable for regular in‑shop inspection duties. Precision that simplifies inspection workflows High manufacturing accuracy delivers immediate practical benefits: reduced measurement scatter, quicker decisions at the gauge, and improved traceability of results. The item is particularly suitable where a compact, highly precise reference is needed—such as finishing lines, jig setup or small‑batch quality controls. By providing a reliable datum, the pin supports downstream processes and helps to prevent cascading rework caused by uncertain measurements. Classification and typical applications With a nominal diameter of 13.03 mm and a short measuring length, this product falls into the micro class of inspection pins, tailored for fine mechanical and workshop work where compact dimensions and stiffness are crucial. Typical applications include bore verification, end‑measure validation and use as a go/no‑go reference in assembly and inspection benches. The single‑piece design keeps handling straightforward while integrating into conventional inspection routines. Contact Metav Werkzeuge today to discuss fitment, request application guidance or to procure this Metav IndustryLine workshop‑grade gauge pin directly from our Emmerich stock. Technical Data Article number: M323.D03 SKU: M323.D03 GTIN: 4061905067174 Material: Special steel Nominal diameter: 13.03 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Version: Workshop execution Facts Nominal diameter (mm): 13.03 Length (mm): 50 Tolerance (mm): ±0.002 Weight (kg): 0.1 GTIN: 4061905067174 Special features Single inspection/gauge pin Hardened special‑steel construction Workshop execution for regular in‑shop use Compact micro classification for fine mechanical work FAQ What is the intended use for this gauge pin? The gauge pin is intended as a precision reference for bore checks, end‑face measurements and go/no‑go verifications in workshop and small‑scale production environments. What tolerance does the gauge pin achieve? The gauge pin is manufactured to a tolerance of ±0.002 mm, ensuring tight dimensional conformity for reliable inspection. Which material is used for the pin? The pin is made of special steel, heat treated for wear resistance and durability in routine inspection tasks. Is this a single item or part of a set? This entry describes a single gauge pin supplied individually under SKU M323.D03. Which classification does the gauge pin fall under? With a nominal diameter of 13.03 mm and a short length, it is classified in the micro range, suitable for fine mechanical and workshop inspection work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.04mm Test Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high measurement fidelity and compact design for reliable end‑of‑line inspection — ±0.002 mm tolerance and a 13.04 mm nominal diameter ensure repeatable results. Order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.D04 — single inspection pin, 13.04 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.D04 is a single‑piece inspection pin intended for precise end‑measurement and gauge work in workshop environments. Workshop version for robust use Diameter precisely 13.04 mm Length 50 mm for repeatable insertion Tolerance ±0.002 mm for high accuracy Precision that shortens inspection cycles The M323.D04 delivers a ±0.002 mm positional tolerance, which translates into consistently reproducible checks during batch inspection and assembly verification. Where tight clearances or finish criteria are critical, the pin’s defined diameter of 13.04 mm removes ambiguity from go/no‑go checks and minimises rework. By reducing measurement scatter, this component supports faster decision making on the shop floor and improves throughput in repetitive measurement tasks. Robust workshop execution for daily use Constructed in special steel and specified as a workshop version, the pin is designed for regular handling and insertion cycles typical of production environments. The 50 mm overall length gives sufficient engagement for stable seating while keeping handling straightforward for operators and fixtures. The combination of compact form and solid material ensures that the pin remains a dependable reference element in checks and jigs without demanding excessive fixture redesign. Suited to micro‑scale inspection and gauge sets With a nominal diameter of 13.04 mm, this item falls into the micro measurement class (10–100 mm), making it suitable for fine mechanical tasks and end‑measurements in precision subassemblies. The design supports integration into gauge blocks, alignment jigs and dedicated inspection fixtures where exact diameters serve as a reference standard. Identification and traceability are straightforward thanks to the SKU and GTIN, aiding inventory control in production and quality departments. For procurement or technical clarification regarding the Metav IndustryLine gauge pin M323.D04 with its ±0.002 mm tolerance, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.D04 GTIN: 4061905067181 Label: Gauge pin, single, 13.04 mm diameter, 50 mm length Manufacturer: Metav IndustryLine Material: Special steel Weight: 0.1 kg Facts Diameter: 13.04 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm eClass: 21170231 Special features Workshop execution Category: gauge pins Storytrigger: end measurements FAQ What tolerance can be expected from this inspection pin? The Metav IndustryLine gauge pin M323.D04 is specified with an accuracy of ±0.002 mm, making it suitable for fine inspection tasks that require tight dimensional control. Which materials is the pin suitable for when used as a reference in gauges? The pin is made from special steel; as a hardened, dimensionally stable reference it is intended for use with typical workshop components during fitting and inspection operations. Is this pin intended for micro‑measurement applications? Yes, the diameter 13.04 mm places the item in the micro measurement class (10–100 mm), so it is well matched to small parts, precision assemblies and end‑measurement tasks. Can the M323.D04 be used interchangeably in standard gauge sets? The M323.D04 is manufactured as a single inspection pin with defined diameter and length; compatibility with a particular gauge set depends on the set’s nominal diameters and fixture geometry — check the SKU M323.D04 against the set specification. How is the product identified for stock and traceability? Identification is provided via the SKU M323.D04 and GTIN 4061905067181, which supports traceability and inventory management for quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.05mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precise end-measurement capability and robust workshop construction: the test pin offers ±0.002 mm repeatability in a Ø13.05 mm body with a 50 mm overall length, enabling reliable fixture checks and reference gauging. Order directly via Metav Werkzeuge or contact their consultants for application advice and stock confirmation. Test Pin M323.D05 — single inspection pin, Ø13.05 mm, 50 mm length (Metav IndustryLine) The Test Pin M323.D05 is a workshop-grade single inspection pin designed for accurate end measurements and fixture alignment in general machine-shop applications. Workshop-grade construction Diameter Ø13.05 mm for exact fits 50 mm overall length for fixture work Tolerance ±0.002 mm for high repeatability Consistent micrometric control for routine inspection A tight tolerance of ±0.002 mm positions this inspection pin among high-precision shop tools, delivering repeatable reference points for go/no-go tests, end‑face checks and assembly verification. The small geometric deviation reduces measurement scatter when compared with standard pins, which in turn supports tighter process control and lower scrap rates. In practical terms, the consistent diameter of Ø13.05 mm ensures predictable seating in standard holders and fixture bores, so staff can rely on one reference dimension rather than compensating for variable fits. This accuracy supports quality assurance procedures without imposing complex handling changes. Built to endure everyday workshop demands Manufactured in special steel and finished for workshop use, the pin resists wear and maintains dimensional stability across repeated contact cycles. The workshop-grade execution is optimised for robust handling and repeatable seating, which reduces the frequency of replacements and downtime. A modest weight of 0.1 kg gives the pin a reassuring feel in use while remaining easy to manoeuvre during repetitive checks. The material choice balances hardness and toughness so the contact faces retain form under normal operating forces, extending service life and keeping inspection routines dependable. Easily integrated into existing gauging and fixture systems With a 50 mm overall length, this inspection pin fits common gauge blocks, test fixtures and alignment jigs without excessive overhang or the need for modification. The compact yet accessible geometry simplifies mounting and visual inspection, while the standard diameter enables interchangeability with holders designed for 13 mm-class pins. Traceable identification via SKU M323.D05 and GTIN 4061905067198 streamlines stock management and reordering for production lines. For workshops seeking a straightforward, low‑complexity reference component, this single inspection pin brings reliable dimensional reference into daily workflows with minimal training required. Choose the Metav IndustryLine test pin and contact Metav Werkzeuge in Emmerich for personalised advice and reliable supply to your workshop. Technical data Article number: M323.D05 GTIN: 4061905067198 Manufacturer: Metav IndustryLine Label: Test pin, single, 13.05 mm length 50 mm Core specifications Diameter: 13.05 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg eClass: 21170231 Features Workshop execution Material: Special steel Category: Test pins SKU: M323.D05 Application: End measurements and fixture checks FAQ What is the declared accuracy of the test pin? The declared positional accuracy is ±0.002 mm, making the Test Pin M323.D05 suitable for precise reference and go/no-go inspection tasks. Which material is used and how durable is it? The inspection pin is made from special steel in a workshop-grade finish; this provides wear resistance and dimensional stability for repeated contact use. What fixtures and holders will accept this pin? The Ø13.05 mm diameter and 50 mm length allow the pin to be used with standard 13 mm-class holders, gauge blocks and common fixture systems without modification. How is the product identified for reordering? The part is listed under SKU M323.D05 and GTIN 4061905067198; referencing these codes simplifies stock replacement and procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.06mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Reliable inspection in a compact format: high repeatability thanks to a tolerance of ±0.002 mm and wear-resistant special steel construction ensure dependable end-dimension checks. Order the gauge pin directly via Metav Werkzeuge or contact our advisors for specification support. Gauge pin, single 13.06 mm — workshop inspection pin, Metav IndustryLine A single gauge pin 13.06 mm designed for quick verification of bore diameters and end dimensions in workshop and production-control environments. Precision tolerance ±0.002 mm Diameter exactly 13.06 mm 50 mm hardened special steel length Delivered in a transport case Verify tight fits with predictable accuracy The compact inspection pin provides a straightforward method for checking holes, bores and mating features where repeatability matters. Produced from special steel and finished to a tight ±0.002 mm tolerance, the pin supports consistent go/no-go assessments and serves as a reference for assembly checks. The small, robust profile minimises deflection and wear, so measurements remain stable across repeated use, reducing rework and downtime. Built for workshop handling and durability This workshop-grade item is optimised for everyday use: the 50 mm shaft length gives sufficient engagement for standard inspections while keeping handling simple. The material choice focuses on surface resistance to rolling and abrasion, translating into longer service life and lower lifecycle costs when compared with untreated pins. The design facilitates fast manual checks and integrates easily into inspection jigs or bench routines. Practical logistics and traceability for production Supplied individually and packed for transport, the pin arrives protected against handling damage, simplifying storage and bin management on the shop floor. The compact packaging also makes it straightforward to issue the item with incoming inspection or include it in a gauge set. Clear identification with the SKU and GTIN supports traceability through ordering and inventory systems, aiding quality documentation and audit trails. Why this inspection pin suits professional shops Engineered as a workshop execution item, the pin balances ruggedness with metrological performance to meet the needs of maintenance teams, small-batch production and quality departments that require reliable checks without overcomplexity. Its precise diameter and hardened construction make it suitable for repetitive go/no-go fits and bench verification tasks, delivering measurable efficiency gains in routine inspection workflows. Contact Metav Werkzeuge today to discuss suitability for specific inspection routines or to order the Gauge pin, single 13.06 mm (SKU M323.D06) directly from our Emmerich warehouse Technical Data Article number: M323.D06 GTIN: 4061905067204 Manufacturer: Metav IndustryLine Facts Diameter: 13.06 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Delivered in transport case FAQ What is the exact diameter and tolerance of this gauge pin? The gauge pin has a diameter of 13.06 mm and is manufactured to a tolerance of ±0.002 mm, suitable for precise fit verification. Is the pin supplied ready for use or does it require preparation? The Gauge pin, single 13.06 mm from Metav IndustryLine is supplied ready for inspection tasks and arrives packed in a transport case for protection during handling. Can this inspection pin be used in production jigs and fixtures? Yes, the pin’s hardened special steel construction and exact diameter make it suitable for integration into jigs, fixtures and manual checking stations. What identifiers should be used when ordering or recording this item? Use SKU M323.D06 and GTIN 4061905067204 to ensure the correct item is ordered and tracked in inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.07mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of workshop‑ready precision with a 13.07 mm end measure produced from special steel and a verified dimensional deviation of ±0.002 mm; order directly via Metav Werkzeuge or request advice from our consultants for integration into fixture and inspection processes. Metav IndustryLine gauge pin, Ø 13.07 mm, length 50 mm — special steel, ±0.002 mm tolerance The gauge pin Ø 13.07 mm, 50 mm long is a single hardened test pin for end‑measurement, fixture set‑up and quick dimensional checks in workshop and quality‑control environments. Workshop version for robust use Diameter 13.07 mm for end measurement Tolerance ±0.002 mm for high accuracy 50 mm overall length for fixture set‑up Precision where it reduces rework and downtime The Metav IndustryLine gauge pin delivers repeatable results thanks to a tight ±0.002 mm tolerance, which minimises adjustment loops during assembly and inspection. In practice, this degree of accuracy reduces the need for trial fits and shortens setup times on jigs and fixtures. The specified deviation indicates the maximum permissible difference from nominal diameter, ensuring a reliable reference for comparative checks and pass/fail gauging. For workshops that value consistent throughput, this single‑piece test pin functions as a compact, traceable standard for everyday dimensional control. Durable construction that suits the workshop environment Manufactured from special steel, the pin combines wear resistance with dimensional stability under typical workshop stresses. The 50 mm shank provides comfortable handling and secure seating in fixture bores, while the solid design resists bending during manual use. The robust workshop execution makes the pin suitable for frequent handling and integrates well with standard test benches and manual measuring routines. Where a hardened reference is required for frequent end‑measure comparisons, the material selection supports long service life and predictable performance. Practical use and advantages for quality control As a dedicated end‑measure, the pin is intended for quick verification of hole diameters, alignment checks and as a locating element during assembly. Being a single‑item gauge simplifies traceability and storage within a set of assembly aids; the compact dimensions facilitate rapid swapping between stations. The combination of 13.07 mm diameter and 50 mm length provides a balance between reach and rigidity, which is particularly helpful when checking bores or setting up small fixtures. The clear nominal size and robust finish reduce the risk of operator error in routine checks. For a workshop‑proof reference standard from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice or to arrange a purchase and delivery. Technical data SKU: M323.D07 GTIN: 4061905068096 Manufacturer: Metav IndustryLine Facts Diameter: 13.07 mm Length: 50 mm Tolerance / deviation: ±0.002 mm Weight: 0.10 kg Special features Material: special steel Workshop execution Single test pin for end measurements Suitable for fixture set‑up and dimensional checks FAQ What materials is the pin made from? The gauge pin is manufactured from special steel, chosen for wear resistance and stability under workshop conditions. What level of accuracy can be expected? The gauge pin is supplied with a dimensional deviation of ±0.002 mm, making it suitable for high‑precision comparative checks in production and inspection. Can the pin be used for locating and fixture set‑up? Yes, the 50 mm overall length and rigid construction make the pin appropriate as a locating element and for setting up jigs and fixtures. Is this pin a single item or part of a set? This listing refers to a single gauge pin (SKU M323.D07) intended for individual use as a reference or locating component. Which tasks is the pin best suited for? Typical uses include quick bore verification, alignment checks and end‑measurement tasks where a durable, accurate reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.08mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a workshop-grade gauge pin that combines tight dimensional control with robust material for repeatable end measurements; the Ø13.08 mm / 50 mm test pin offers a ±0.002 mm tolerance for reliable fit checks. Order the gauge pin directly via Metav Werkzeuge or ask our consultants for application advice. Gauge pin, single — Ø13.08 mm, length 50 mm (Metav IndustryLine) The Gauge Pin Ø13.08 mm, 50 mm length is a workshop-grade precision test pin designed for end‑measure checks and fit inspection in production and inspection routines Workshop-grade construction Diameter Ø13.08 mm for end measurements Dimensional tolerance ±0.002 mm Special steel for robust use Consistent precision for routine inspection A straight, hardened gauge pin with a tolerance of ±0.002 mm provides a dependable reference for go/no‑go checks, assembly trials and verification of mating bores. The narrow tolerance reduces uncertainty in pass/fail decisions, which supports faster quality gates on the shop floor. The controlled geometry of the test pin reduces measurement scatter and helps maintain throughput without repeated set‑ups. Built for workshop handling and durability Manufactured in special steel and specified as a workshop‑grade article, this test pin withstands frequent handling and typical production wear. The 50 mm overall length and Ø13.08 mm diameter give a compact footprint that fits common fixtures and inspection jigs. The modest mass ensures easy placement and removal, while the robust material extends service life under daily use, reducing replacement intervals and unplanned downtime. Practical use and traceability in inspection workflows The single test pin is suited to end‑dimension assessment, alignment checks and functional fit trials in manufacturing or incoming inspection. Marking and the included identifiers support traceability during audits; the clear SKU and GTIN allow direct reordering and inventory control. Simple handling and unambiguous geometry make the element a pragmatic tool for repetitive checks, helping teams keep quality documentation concise and reproducible. For workshop applications demanding repeatable end‑measure checks, request the Metav IndustryLine gauge pin (SKU M323.D08) from Metav Werkzeuge and consult our specialists for matching inspection routines Technical data Article number: M323.D08 GTIN: 4061905068133 Label: Prüfstift, einzeln, 13,08 mm Länge 50 mm Diameter: 13.08 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Material: Special steel Version: Workshop execution Type: Single test pin Category: Gauge pins FAQ What is the measurement tolerance of this test pin? The test pin is manufactured to a tolerance of ±0.002 mm, providing stable reference values for fit and end‑measure inspections with the Metav IndustryLine gauge pin (SKU M323.D08). For which applications is this gauge pin suitable? This single gauge pin is intended for end‑dimension checks, bore fit verification and assembly trials in workshop and production settings where compact, repeatable test elements are required. What material is used and why does it matter? Made from special steel, the pin combines dimensional stability with wear resistance, ensuring consistent geometry under frequent handling typical of workshop inspection routines. How is the product identified for reordering and traceability? Use the SKU M323.D08 and GTIN 4061905068133 to record the item in inventory systems and to reorder the exact workshop‑grade gauge pin from Metav IndustryLine. Can this pin be used in fixture checks and assembly jigs? Yes — the combination of Ø13.08 mm diameter and 50 mm length fits common fixtures and inspection jigs for routine assembly and quality checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.09mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Combining a ±0.002 mm tolerance with a 13.09 mm diameter and a 50 mm length provides dependable reference dimensions for inspection and fixture set-up; order the gauge pin directly via Metav Werkzeuge or consult our technical team for application advice Gauge pin M323.D09 — 13.09 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin 13.09 mm, length 50 mm is a workshop-grade, precisely ground test pin for end‑dimension checks, locating and go/no‑go references in inspection fixtures Workshop-grade special steel Diameter 13.09 mm, ground to size Length 50 mm for fixture compatibility Tolerance ±0.002 mm for tight inspection Accurate reference for measurement and inspection The M323.D09 gauge pin is manufactured for high repeatability and dimensional accuracy. With a declared tolerance of ±0.002 mm, the pin serves as a reliable reference for end‑dimension verification and fixture alignment. Its 13.09 mm diameter is produced by precision grinding, reducing runout and ensuring consistent contact with mating bores. This level of precision supports faster quality decisions on the shop floor, reducing rework and improving throughput. Durable construction tailored for workshop use Built in a workshop version specification from special steel, the pin balances wear resistance with manageable handling weight (approx. 0.1 kg). Surface finishing and material selection contribute to a long service life under repeated insertion cycles. The solid construction makes the item suitable for daily use in production and inspection environments where robust components are required without sacrificing measurement integrity. Practical integration into quality workflows Supplied as a single, ready‑to‑use test pin with the manufacturer SKU M323.D09, the component integrates easily into existing gauges, plug‑gage sets and locating fixtures. Traceable identification such as GTIN 4061905068140 simplifies logging and inventory control. The compact 50 mm length provides sufficient engagement depth for most fixture applications while remaining easy to handle during rapid inspection sequences, supporting efficient measurement processes on the shop floor. Order the Metav IndustryLine gauge pin from Metav Werkzeuge for a workshop‑ready precision reference — Metav Werkzeuge is available for specification support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M323.D09 GTIN: 4061905068140 Brand: Metav IndustryLine Material: Special steel Version: Workshop execution Facts Diameter: 13.09 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Single gauge pin delivery Precisely ground finish Intended for end‑dimension checks and locating FAQ What is the declared dimensional tolerance of the gauge pin? The gauge pin M323.D09 is specified with a tolerance of ±0.002 mm, suitable for tight inspection tasks. Is the pin suitable for fixture locating and plug checks? Yes, this Metav IndustryLine test pin is intended for locating and end‑dimension verification in fixtures and plug‑gage applications. What material is the pin made from and how durable is it? The pin is manufactured from special steel in a workshop version, offering durable performance under repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.11mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of high repeatability, compact dimensions and a workshop‑grade finish to speed up small‑part inspection and reduce rework. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.D11 — single precision test pin, 13.11 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin M323.D11 is a single precision test pin intended for end‑measurement and inspection tasks in workshop environments, offering a tight manufacturing tolerance for reproducible fits. Diameter 13.11 mm Length 50 mm Tolerance ±0.002 mm Workshop version Precision that shortens inspection cycles The tight production tolerance of ±0.002 mm ensures consistent seating and repeatable measurements when checking bores, gauges or reference fittings. Manufactured from special steel, this precision test pin maintains a reliable diameter under typical workshop handling and resists minor surface damage that can compromise fit checks. The combination of exact diameter and robust material reduces uncertainty in sequential checks, helping to lower the number of re‑measures and minimise process interruptions. Compact format tailored to fine components Classified in the micro range (10–100 mm), the compact dimensions of this inspection pin make it especially suitable for fine mechanical parts, small housings and fixtures where control of end dimensions is critical. With a 13.11 mm measuring diameter and 50 mm overall length, the pin provides sufficient reach without sacrificing stiffness, so delicate parts can be verified with confidence. The short, rigid profile supports quick manual handling and straightforward integration into inspection jigs or fixture checks. Workshop‑grade build for dependable everyday use Delivered as a workshop version, the pin is balanced between precision and practical durability for regular use on the shop floor. The special steel construction offers wear resistance and dimensional stability under normal inspection loads, while the modest mass supports safe handling. Intended for routine verification and sample checks, this test pin is a pragmatic choice where traceable, repeatable dimensional control is required without the cost or fragility of laboratory tools. For reliable measurement of small diameters, request technical guidance for the Metav IndustryLine gauge pin (M323.D11) from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for assistance and rapid availability. Technical data Article number: M323.D11 GTIN: 4061905068164 Eclass: 21170231 Facts Diameter: 13.11 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Single gauge pin Workshop version Material: special steel Category: gauge pins FAQ What is the manufacturing tolerance of this gauge pin? The gauge pin M323.D11 is manufactured to a tolerance of ±0.002 mm, providing tight dimensional control for repeatable inspections. Which materials is the pin suitable for checking? The Metav IndustryLine gauge pin is a dimensional reference for verification tasks and is used to check bores and components made from metals and typical workshop materials. Is the gauge pin supplied calibrated? The product label does not indicate factory calibration; the gauge pin M323.D11 is supplied without a calibration certificate unless otherwise specified at purchase. Can this pin be used in fixture testing for small housings? Yes, the compact 13.11 mm diameter and 50 mm length make this gauge pin well suited to fixture checks and small housing inspections within the micro measurement range. What is the SKU for ordering or referencing? Reference SKU M323.D11 when enquiring about this Metav IndustryLine gauge pin for faster handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.12mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of workshop-grade construction, sub‑millimetre tolerance of ±0.002 mm and a compact 50 mm length for reliable end‑measure checks; order directly via Metav Werkzeuge or consult our specialists for application guidance. M323.D12 Gauge Pin – 13.12 mm diameter, 50 mm length (Metav IndustryLine) The M323.D12 gauge pin is a precision test pin designed for end‑measure and go/no‑go checks in workshop and metrology environments. Workshop‑grade finish for daily use Tolerance ±0.002 mm for fine control Compact 50 mm length for bench measurement Consistent accuracy for critical fits The core benefit of this class of test pin is reproducible measurement: with a nominal diameter of 13.12 mm and a verified tolerance of ±0.002 mm, the pin supports tight acceptance criteria and repeatable pass/fail checks. Classified in the micro category for measuring tools, this size balances reach and stiffness for small components; it is therefore suited to precision checks on bores, fits and end gauges where even small diameter deviations matter. The numerical tolerance is presented as a clear specification for technical evaluation and comparison. Built for everyday workshop handling Manufactured from special steel, the pin combines wear resistance with a stable form to reduce measurement drift over repeated use. The 50 mm length gives sufficient engagement for many bench operations while keeping the profiling compact and easy to manoeuvre. The workshop‑grade configuration means surface finish and dimensional control are optimised for frequent handling, and delivery in a transport case protects the pin during storage and transit, reducing the risk of inadvertent damage. Practical use and integration in quality workflows As an individual test pin, the component is ideal for spot checks, setting up fixtures or as part of a gauge block stack when precise reference diameters are required. The simple geometry makes interpretation straightforward during inspection routines and supports efficient throughput in small series production. For organisations consolidating suppliers, acquisition via Metav IndustryLine provides traceable sourcing and consistent quality assurance, helping to simplify incoming inspection and reduce rework rates. For workshop applications requiring compact precision, contact Metav Werkzeuge to secure the Metav IndustryLine M323.D12 gauge pin and discuss suitability with our technical consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.D12 GTIN: 4061905068171 Manufacturer: Metav IndustryLine Facts Diameter: 13.12 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Supplied in transport case Single test pin, individual delivery FAQ What tolerance does the gauge pin provide? The M323.D12 gauge pin is specified with a tolerance of ±0.002 mm, making it suitable for fine inspection tasks. Is the pin suitable for bore checking and go/no‑go tests? Yes, the gauge pin is intended for end‑measure and go/no‑go checks and works well for bore verification and setting fixtures. What material is the test pin made from? The M323.D12 is made from special steel, chosen for durability and dimensional stability under routine workshop use. How is the pin supplied to protect accuracy during transport? The test pin is supplied in a transport case to protect the measuring surface and maintain accuracy in storage and transit. Can the pin be used in automated inspection fixtures? The compact geometry and tight tolerance of the M323.D12 make it compatible with many fixture‑based inspection setups where a precise reference diameter is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.13 mm Gauge Pin 50 mm Length Workshop Version - Metav IndustryLine
Take advantage of the high metrological accuracy and compact form factor to streamline end‑dimension checks in the workshop; the combination of 13.13 mm diameter, 50 mm length and a verified tolerance of ±0.002 mm supports consistent quality control. Order the gauge pin directly via Metav Werkzeuge or consult their technical team for application-specific advice. Gauge pin M323.D13 — single test pin, 13.13 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin M323.D13 for fast end‑dimension verification and repeatable go/no‑go checks in workshop inspection and small‑batch production. 13.13 mm gauge diameter 50 mm overall length for compact checks Accuracy ±0.002 mm for fine measurement Workshop-grade special steel construction Reliable, repeatable measurements for production control This single‑piece gauge pin delivers reliable precision suitable for routine inspection tasks where repeatability matters. The specified accuracy of ±0.002 mm defines the instrument's measuring capability and helps reduce uncertainty in tolerance checks, making it suitable for fine control of end dimensions. The compact design minimises handling error and supports fast throughput in workshop quality loops, so results remain consistent across repeated measurements. Compact form for rapid and accurate end‑size checking With a 13.13 mm diameter and 50 mm overall length, the pin is optimised for confined fixtures and small working envelopes. The short overall length reduces cantilevering and vibration, improving stability during insertion into bores or reference features. This form factor benefits tasks that demand quick go/no‑go validation or series spot checks rather than bulk gauging, giving technicians a practical tool for daily verification without complex setup. Workshop-grade construction for long service life Manufactured from special steel and specified as a workshop execution, the pin resists wear under normal inspection use and preserves dimensional integrity. The solid construction supports repeated contact checks and hand‑held measurements while maintaining surface condition. Where traceability or further documentation is required, Metav Werkzeuge can advise on optional calibration and handling practices to extend service life and preserve measurement reliability. Contact Metav Werkzeuge for tailored advice, measurement tolerancing support or to request the M323.D13 gauge pin with application guidance from their Emmerich team via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.D13 GTIN: 4061905068188 Material: special steel Supply: single piece Brand: Metav IndustryLine Facts Diameter: 13.13 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Workshop execution Intended for end‑dimension checks Single‑piece gauge pin FAQ What is this gauge pin intended for? The M323.D13 gauge pin from Metav IndustryLine is intended for end‑dimension verification and quick go/no‑go checks in workshop inspection and small‑batch production. What measurement tolerance does the pin offer? The gauge pin is specified with an accuracy of ±0.002 mm, providing fine resolution for routine dimensional control tasks. Is the M323.D13 supplied as a single item or in sets? This product is supplied as a single gauge pin (SKU M323.D13) for flexible use or integration into custom inspection sets. Can Metav IndustryLine provide calibration or traceability documentation? Calibration status is not specified with the standard supply; Metav Werkzeuge can be contacted to discuss calibration options or documentation for the gauge pin to meet specific traceability requirements. Which environments or applications suit this pin best? The pin's compact 50 mm length and robust steel construction make it well suited to workshop inspection, fixture checks and end‑size measurements where a stable, repeatable reference is needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.14mm Go/No-Go Test Pin 50mm Length Workshop Finish - Metav IndustryLine
A compact, workshop-grade gauge pin offering tight repeatability with a diameter of 13.14 mm and a length of 50 mm; its ±0.002 mm tolerance supports reliable go/no-go and reference checks while integrating straightforwardly into inspection workflows. Order the item directly via Metav Werkzeuge or request assistance from our consultants for specification matching. Gauge pin, single — 13.14 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin M323.D14 for precise reference and dimensional checks in metrology and workshop inspection tasks. Workshop-grade gauge pin, hardened special steel Diameter 13.14 mm for precise fits Length 50 mm for deep-bore checks Tolerance ±0.002 mm for repeatable results Accurate reference for routine inspections The compact inspection pin provides a direct physical reference for hole diameters and alignment tasks. With a nominal diameter of 13.14 mm and a declared tolerance of ±0.002 mm, the component minimises measuring uncertainty and speeds up comparative checks on production parts. Designed as a single-stage test pin, it acts as a reliable datum when paired with gauge blocks or fixture plates, supporting consistent measurements without elaborate setup. The tight tolerance makes it suitable for dimensional checks where standard workshop gauges would otherwise introduce variability. Durable design built for repeated handling Constructed from special steel in a workshop execution, the pin resists wear under frequent insertion and retraction cycles typical in production environments. The 50 mm length gives sufficient engagement depth for many bores while remaining easy to handle at the bench. A compact mass (approx. 0.1 kg) ensures manageable manipulation and quick placement in pin holders or measuring jigs. The robust material choice and finish prioritise longevity, reducing the need for frequent replacement and helping to maintain stable inspection routines. Easy integration into quality processes This inspection plug integrates into existing pin sets, quick-check fixtures and bench inspection stations, enabling faster go/no-go decisions and consistent part acceptance criteria. Labelling and item identification follow industry practise, allowing straightforward inventory control and traceability when used alongside calibration records and inspection logs. The combination of a clear nominal diameter, defined length and a documented ±0.002 mm tolerance supports quality documentation and repeatable sampling plans on the shop floor. Choose Metav IndustryLine gauge pins for dependable dimensional control — order the M323.D14 through Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com / +49 2822 7131930 for application advice Technical Data SKU: M323.D14 GTIN: 4061905068195 Brand: Metav IndustryLine Item: Gauge pin, single, 13.14 mm diameter, 50 mm length Facts Diameter: 13.14 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Measuring range: 13.14 mm Special features Material: Special steel Workshop execution Category: Gauge pins Story trigger: end dimensions FAQ What tolerance does this gauge pin have? The gauge pin M323.D14 is specified with a tolerance of ±0.002 mm, suitable for tight workshop inspection limits. What applications is this inspection pin intended for? It is designed for verifying hole diameters, alignment checks and acting as a reference pin in fixture and go/no-go test routines. Can the pin be used with standard pin holders and blocks? Yes, the geometry and dimensions of the M323.D14 make it compatible with common pin holders and block arrangements for quick integration. Is the item supplied individually or as part of a set? This entry describes a single gauge pin supplied as an individual test pin for flexible use in inspection systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.15mm Test Pin Length 50mm Workshop Version, Precision ±0.002mm - Metav IndustryLine
Combine reliable workshop use with ±0.002 mm measurement accuracy and a 13.15 mm controlled diameter for reproducible end‑dimension checks; robust special steel construction and delivery in a transport case ensure ready integration into inspection routines. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. M323.D15 gauge pin — 13.15 mm diameter, 50 mm length (Metav IndustryLine) The M323.D15 gauge pin is a precision inspection pin designed for end‑dimension verification and fixture use in workshop and production environments. High precision ±0.002 mm tolerance Diameter 13.15 mm for precise end‑gauging Robust special steel construction Delivered in transport case for protection Consistent measurement certainty for production control Manufactured to a ±0.002 mm specification, this precision gauge pin provides a stable reference for end‑dimension checks and pass/fail gauging. The tight tolerance reduces uncertainty in routine inspections, helping to speed acceptance tests and reduce rework. When incorporated into go/no‑go fixtures or bench inspection layouts, the controlled diameter delivers reproducible results that support quality documentation and traceable measurement chains. Durable design that copes with workshop demands The component is made from special steel, chosen for dimensional stability and wear resistance under frequent contact. A 50 mm overall length balances accessibility and rigidity, making the pin suitable for use in handheld gauges, fixture inserts and linear alignment tasks. The workshop version finish tolerates typical handling and contributes to a long service life, lowering intervals for replacement and maintenance while sustaining measuring performance. Practical handling and ready‑to‑use delivery Supplied as an individual inspection pin, the item is packaged in a protective transport case appropriate for maintenance and storage during shipment. The compact format simplifies inventory handling for inspection benches and metrology kits and allows straightforward integration into existing gauge sets. Clear identification (SKU M323.D15 and GTIN provided in the technical data) supports traceability in stock systems and process documentation. Contact Metav Werkzeuge in Emmerich for tailored application advice or to request a detailed specification sheet by email or phone: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: M323.D15 GTIN: 4061905065941 Material: Special steel Label: Test pin, single, 13.15 mm length 50 mm Numbers / core technical data Diameter: 13.15 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.1 kg Designs / special features Workshop version Single probe pin configuration Delivered in a transport case for protection Suitable for end‑dimension checks and fixture use FAQ What tolerance does the M323.D15 gauge pin offer? The M323.D15 gauge pin is manufactured to a tolerance of ±0.002 mm, making it suitable for fine inspection tasks and reproducible gauging in workshop environments. Which material is used for this inspection pin? This inspection pin is produced in special steel, giving a robust surface and dimensional stability for repeated measurement cycles. Is the pin supplied ready for use and protected during transport? Yes, the test pin is provided individually and delivered in a protective transport case to safeguard the component during shipment and handling. Can the gauge pin be integrated into fixtures and go/no‑go gauges? The design and dimensions of the M323.D15 are suitable for use as a fixture insert or as a reference element in go/no‑go and alignment setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.16mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
The combination of high repeatability, robust special steel construction and compact dimensions ensures dependable end‑measurement performance in workshop environments. Order the gauge pin directly via Metav Werkzeuge or contact the consultants for application advice. Gauge pin (single) Ø 13.16 mm, length 50 mm — Metav IndustryLine A gauge pin (single) Ø 13.16 mm, length 50 mm designed for precise end‑measure checks, fixture set‑up and repeatable inspection tasks in the workshop High accuracy ±0.002 mm Special steel construction Workshop version for robust use 50 mm length for compact fixtures Dependable accuracy for repeatable end‑measure checks The gauge pin delivers a measured accuracy of ±0.002 mm, which translates into consistently repeatable results for small‑format inspection tasks. This level of precision reduces measurement scatter and supports tight tolerance checks during final inspection or setup. With a nominal diameter of 13.16 mm, the pin provides a stable datum when used in mandrels, alignment fixtures or as a reference element in comparator rigs, helping to maintain process quality and reduce rework. Robust construction engineered for daily workshop use Manufactured from special steel, the test pin resists wear and maintains its form under frequent handling and gentle knocks typical in busy shops. The workshop version designation indicates a design balance between hardness and toughness, giving good surface life while remaining suitable for routine fixturing. The compact 50 mm length and modest mass (approx. 0.1 kg) make the pin easy to handle and position in confined setups, while still providing the rigidity required for consistent contact measurements. Simple integration into inspection and setup routines As a single gauge pin, this component integrates neatly into existing toolsets, jigs and go/no‑go arrangements. Its standardised diameter and controlled tolerance permit interchangeability with calibrated datum pins and gauge sets, allowing simple replacement or expansion of inspection arrays. Delivered ready for transport in a protective case, the pin is protected in transit and storage, which helps preserve the measurement surface and ensures immediate readiness at the workstation. For workshop‑grade accuracy and straightforward application support, contact Metav Werkzeuge for tailored advice and to secure the Metav IndustryLine gauge pin for reliable end‑measurement tasks Technical data Article number: M323.D16 GTIN: 4061905065958 Article name: Gauge pin, single, Ø 13.16 mm, length 50 mm Facts Diameter: 13.16 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version for robust use Delivered in a transport case Category: Gauge pins FAQ What tolerance can be expected from this gauge pin? The gauge pin offers an accuracy of ±0.002 mm; the Metav IndustryLine gauge pin M323.D16 is produced to meet this tolerance for repeatable end‑measurement tasks. Is the material suitable for frequent contact measurements? Yes, the pin is made from special steel and the workshop version is intended for durable, repeated use in inspection and fixturing. Can this pin be used as a datum element in fixtures? The gauge pin’s controlled diameter of 13.16 mm and tight accuracy make it suitable as a datum element within fixture and alignment systems. How is the pin delivered and protected? The product is supplied in a protective transport case to preserve the measurement surface and ensure safe handling during storage and transport. Is the gauge pin compatible with standard gauge sets and mandrels? The standardised diameter and tolerance allow integration with comparable gauge elements and mandrels; the Metav IndustryLine pin M323.D16 can be exchanged within inspection arrays where a 13.16 mm reference is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com