Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
13.17mm Gauge Pin Single 50mm Length, Workshop Version - Metav IndustryLine
Benefit from workshop-grade construction, a precise nominal diameter of 13.17 mm and a tight tolerance of ±0.002 mm for repeatable end‑dimension checks; order this inspection pin directly via Metav Werkzeuge or consult our technical advisors for application support. Gauge pin M323.D17 — inspection pin, 13.17 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin M323.D17 is a workshop-grade inspection pin designed for end‑dimension verification and assembly checks in machine shops and quality departments. Workshop version for robust handling Exact diameter 13.17 mm for end‑measurements 50 mm length for through‑hole and stop checks Special steel construction for wear resistance Precision where production tolerances matter The inspection pin provides consistent reference dimensions thanks to its nominal 13.17 mm diameter and verified accuracy of ±0.002 mm. This level of accuracy makes the component suitable for repeat gauging tasks and spot checks during series production, where a defined tolerance band must be confirmed quickly. The cylindrical geometry ensures stable seating in bores and registers, enabling reproducible results when used as a go/no‑go reference or as a datum for comparative measurement. Built for everyday workshop use with straightforward handling As a workshop version, the pin is engineered for routine use on benches and inside fixtures. The 50 mm length gives sufficient reach for many through‑hole checks and step measurements while remaining easy to handle. Constructed from special steel, the item offers improved resistance to wear compared with untreated pins, which reduces the need for frequent replacement and supports reliable dimensional control over time. Supplied in a protective case, the component arrives ready for storage and safe transport between workstations. Practical specification and application guidance The component suits tasks such as end‑dimension verification, alignment of assemblies and use as a checking mandrel in smaller jigs. Its modest mass and compact form factor permit rapid interchange in measurement routines and integration into manual inspection flows. For traceable quality assurance, the item is identified by article number M323.D17 and GTIN for inventory and calibration records. Where higher integration into automated inspection is required, the pin can be used as a stable mechanical reference within measuring fixtures or comparator setups. Contact Metav Werkzeuge today for personalised advice on workshop gauge pins and to arrange delivery from our Emmerich stock — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M323.D17 GTIN: 4061905065965 Category: Gauge pins Facts Diameter: 13.17 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: special steel Workshop execution Delivered in protective case (plastic or wooden) FAQ What measurements is this gauge pin intended for? This gauge pin is intended for end‑dimension verification and related inspection tasks using the gauge pin M323.D17 (inspection pin, Metav IndustryLine, SKU M323.D17). Is the inspection pin suitable for repeated use in production? Yes, the M323.D17 inspection pin is a workshop version made from special steel and designed for repeated use in production checks and fixture applications. How is the pin supplied for transport and storage? The pin is supplied in a protective case, which is intended for safe transport and storage of the gauge pin M323.D17. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.18mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of precision (±0.002 mm), robust workshop‑grade construction, and compact dimensions for reliable reference checks and reduced rework. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.D18 – Ø13.18 mm, length 50 mm (Metav IndustryLine) A gauge pin M323.D18 designed as a workshop reference pin for end‑measure checks and fit verification in production and inspection routines. Workshop‑grade construction Diameter Ø13.18 mm for precise fits Tolerance ±0.002 mm for high accuracy Precise reference that reduces rework and inspection time The Ø13.18 mm diameter and the tight tolerance ±0.002 mm make this pin suitable as a dimensional reference for go/no‑go checks and end‑measure verification. By using a clearly defined reference gauge, measurement uncertainty is reduced and setup times at inspection stations are shortened. The controlled dimension and repeatability assist in avoiding costly rework by ensuring components meet fit requirements before assembly. Robust construction for daily workshop use Built in a workshop‑grade execution from special steel, the pin balances wear resistance with machinability to withstand frequent handling. The 50 mm length gives a stable bearing surface for fixtures and mating bores, while a compact mass supports easy handling on the shop floor. The design suits repeated insertion and withdrawal cycles typical of inspection benches, prolonging usable life and keeping maintenance intervals low. Streamlined integration into production and QA workflows As a single, traceable reference item, the pin works well in fixture checks, calibration jigs and comparative gauging. The combination of defined diameter, length and measured accuracy fits industrial metrology procedures and can be archived as a reference standard within quality records. Using a dedicated gauge pin for end‑measure tasks simplifies traceability and aligns with routine quality control steps, enabling consistent pass/fail decisions. Measurable benefits for process reliability Adopting a dedicated gauge pin like this supports faster decisions at the inspection stage and reduces downstream variability in assembly. The compact format suits bench testing and fixture validation, while the industrial tolerance helps maintain interchangeability of mating parts. These measurable improvements in throughput and quality control contribute directly to lower scrap rates and more predictable production output. For workshop reference gauges from Metav IndustryLine, consult Metav Werkzeuge in Emmerich for specification matching and logistical support — Metav Werkzeuge assists with application advice and order fulfilment. Technical data Article number: M323.D18 GTIN: 4061905065972 Manufacturer: Metav IndustryLine Data Diameter: 13.18 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg ECLASS: 21170231 Special features Material: Special steel Workshop execution Single piece delivery Suitable for end‑measure and reference checks FAQ What accuracy can be expected from this gauge pin? The gauge pin M323.D18 is specified with a tolerance of ±0.002 mm, providing a high‑precision reference for fit and end‑measure tasks. Is the pin suitable for repeated bench inspections? Yes, the workshop‑grade construction and special steel material make the pin appropriate for frequent insertion and withdrawal cycles in inspection routines. Can this pin be used as a reference in fixture validation? Using the M323.D18 as a reference gauge supports fixture validation and helps ensure mating bores meet required dimensions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.19mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-grade durability, micrometre-level tolerance and a compact 50 mm length for reliable reference measurements in fixture set-ups. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.D19 — precision checking pin, 13.19 mm Ø, 50 mm length (Metav IndustryLine) The Gauge pin M323.D19 is a single, workshop-grade checking pin designed for precise end‑measure and reference tasks in inspection, jigs and fixture alignment across metalworking environments. Workshop version for everyday use Diameter 13.19 mm for precise fits Length 50 mm for stable engagement Tolerance ±0.002 mm for repeatable checks Consistent reference measurements with micrometre-level control As a dedicated gauge pin, this checking pin provides a compact reference element for repeatable positioning and go/no‑go checks. The nominal 13.19 mm diameter combined with a declared tolerance of ±0.002 mm ensures measurements that support narrow process windows and stable quality control. When used for end‑measure or alignment operations, the short, rigid body reduces lever‑induced error and maintains repeatability across successive checks, which in turn lowers rework rates and shortens inspection cycles. Robust workshop construction to reduce downtime Built as a workshop version, the pin is manufactured from Special steel that balances surface hardness with resistance to deformation in daily use. The 50 mm length gives secure engagement in holders and jigs without excess overhang, keeping handling simple and safe. This combination of material and geometry delivers dependable precision under regular operational stress, reducing the need for frequent replacement and helping to keep inspection benches operational for longer periods. Seamless integration into inspection and fixture workflows Marked and stocked under SKU M323.D19 with GTIN 4061905065989, this single‑piece checking pin fits standard holders and reference bores used in routine quality checks and set‑ups. The compact form factor makes it easy to include in inspection kits or to use as a datum pin for small assemblies. Traceable identification supports inventory and traceability procedures, while the clear specification enables planners and quality engineers to select the correct diameter and tolerance for their gauge sets and master layouts. Contact Metav Werkzeuge for precise application advice and secure the M323.D19 from Metav IndustryLine for your inspection set‑up; our team in Emmerich is ready to assist with technical details and availability Technical data SKU: M323.D19 GTIN: 4061905065989 Material: Special steel Article: Gauge pin, single Facts Diameter: 13.19 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Single piece delivery Intended use: end‑measure / reference pin Category: Gauge pins FAQ What is the exact diameter tolerance of this checking pin? The checking pin is specified with a diameter of 13.19 mm and a tolerance of ±0.002 mm, providing micrometre‑level control for reference measurements. Can the M323.D19 be used in standard pin holders and jigs? Yes, the M323.D19 is designed for compatibility with common holders and fixture bores used for positioning and reference tasks in machine shops. What material is the pin made from and why does that matter? The pin is made from Special steel; this material offers a balance of hardness and toughness suited to everyday workshop use and helps resist deformation during repeated engagement. Is the product supplied as a single item or in sets? This entry refers to a single gauge pin supplied individually, making it convenient to replace specific diameters within an existing kit. How is the M323.D19 identified for inventory and traceability? The product carries the SKU M323.D19 and GTIN 4061905065989, which can be used for procurement records and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.1mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
With its combination of workshop-grade construction, ±0.002 mm positional accuracy and a compact 50 mm length, reliable end‑size checks become routine. The single 13.1 mm gauge pin is supplied in a protective transport case for safe handling — order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.D10 — single test pin, Ø 13.1 mm, 50 mm length (Metav IndustryLine) A Metav IndustryLine gauge pin designed as a single reference pin for quick, repeatable end‑dimension and go/no‑go checks in workshop environments. Workshop version for robust daily use Diameter 13.1 mm precision ground Tolerance ±0.002 mm certified Delivered in protective transport case Precision that stabilises inspection workflows The compact reference pin delivers high repeatability through a marked tolerance of ±0.002 mm, which reduces uncertainty in routine control tasks. As a hardened, precision‑ground pin with a 13.1 mm nominal diameter and 50 mm usable length, it is suitable for repeat checks where tight radial and axial positioning matter. The clear metrological specification supports traceable sampling and improves decision accuracy on acceptance or rework — an advantage in serial production and maintenance contexts. Built for workshop conditions and fast handling Named for workshop use, this execution combines a sturdy profile and straightforward handling to withstand frequent extraction and insertion. The robust construction and finish limit sensitivity to knocks and contamination compared with delicate laboratory gauges. The compact dimensions enable rapid placement in fixturing or bench checks, so measuring cycles remain efficient without complex setup. The practical design therefore enhances uptime and keeps inspection points short and predictable. Material choice and protective delivery reduce downtime Manufactured from special steel, the pin balances wear resistance with dimensional stability under normal shop conditions. Surface grinding ensures consistent contact geometry; the protective transport case provided minimises the risk of nicks or corrosion during storage and transport. Together, material selection and packaging extend service life and reduce unplanned replacements, supporting predictable inventory planning in the workshop. Traceability, application and ordering made straightforward Identification and logistic handling are simplified by the product labelling and GTIN reference, which aid stock control and reordering. For typical use, the pin serves as a reference element for end‑dimension checks, plug gauges in assemblies, and verification of bores or mandrels where a fixed diameter core is required. The compact format and certified tolerance make it particularly suitable when space is limited but measurement confidence must remain high. For workshop applications that require compact reliability, choose the Metav IndustryLine gauge pin M323.D10 with ±0.002 mm accuracy — contact Metav Werkzeuge in Emmerich for ordering and technical assistance. Technical data Article number: M323.D10 GTIN: 4061905068157 Label: Test pin, single, 13.1 mm, length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 13.1 mm Length: 50 mm Weight: 0.1 kg Accuracy / tolerance: ±0.002 mm Special features Material: Special steel Version: Workshop execution Packaging: Delivered in protective transport case SKU: M323.D10 FAQ What is this gauge pin used for? The gauge pin M323.D10 is used as a reference element for end‑dimension checks, bore verification and quick go/no‑go assessments in workshop inspection routines. Does the pin come with protective packaging? Yes, the Metav IndustryLine gauge pin is supplied in a protective transport case to prevent damage during storage and transit. What level of accuracy can be expected from this pin? The single test pin is specified with a positional tolerance of ±0.002 mm, providing high repeatability for routine checks. Which material is the pin made from? The pin is manufactured from special steel, chosen to provide a balance of wear resistance and dimensional stability for workshop use. Is this pin suitable for serial production control? Yes, the compact size and certified tolerance make the pin suitable for repeatability checks in series production and maintenance operations. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.21mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Compact, workshop-ready precision for routine inspection: a single gauge pin with a 13.21 mm diameter, 50 mm overall length and a tolerance of ±0.002 mm for reliable end-measure checks; order directly via Metav Werkzeuge or consult our technical advisors for application advice. M323.D21 gauge pin — 13.21 mm diameter, 50 mm length, special steel by Metav IndustryLine The M323.D21 gauge pin is a single test pin designed for precise end-measure checks and fit testing in workshop and production environments; it serves as a compact, robust solution where reproducible diameters and dependable contact geometry are required. Workshop version for robust daily use Diameter 13.21 mm for end-measure verification Tolerance ±0.002 mm for high repeatability Delivered in a plastic or wooden transport box Consistent fit checks with industrial repeatability The M323.D21 is engineered as a gauge pin for routine dimensional verification where repeatability and simple handling matter. Its 13.21 mm nominal diameter and declared ±0.002 mm tolerance make it suitable for quick go/no-go or comparative checks on bores and holes, supporting quality control processes on the shop floor. Because the pin is crafted from special steel, it maintains geometry under typical workshop loads and resists wear better than generic steels, which keeps inspection results stable over many cycles. Practical benefits for production and jig setup Featuring a 50 mm overall length, the pin gives sufficient engagement for most fixture and bore checks without excess overhang, balancing reach and stiffness. The workshop specification emphasises durability and ease of use, reducing downtime for handling and cleaning between measurements. When used as part of an inspection routine, the plug-style pin simplifies go/no-go assessment and speeds up setup tasks, improving throughput while keeping measurement uncertainty low — a rational efficiency gain for repetitive quality procedures. Material and handling considerations Made from special steel, the pin offers a reliable contact surface for tactile and optical comparison methods. The hardened surface reduces the rate of dimensional drift caused by surface wear; however, regular inspection against a master gauge is recommended for critical applications. Delivered in a protective plastic or wooden transport box, the single pin is kept secure in transit and storage, reducing the risk of damage to the polished measuring face and maintaining the intended measuring performance for longer. For dependable tolerance verification and workshop-proof handling, request the M323.D21 from Metav Werkzeuge's Emmerich warehouse or contact our consultants for tailored guidance and immediate delivery information Technical data Article number: M323.D21 GTIN: 4061905066283 Brand: Metav IndustryLine Category: Gauge pin (Messstifte) Material: Special steel Numbers / Core technical data Nominal diameter: 13.21 mm Overall length: 50 mm Mass: 0.1 kg Tolerance: ±0.002 mm Special features / Versions Workshop version for robust daily use Single gauge pin delivery Delivered in a plastic or wooden transport box FAQ What is the intended use for this gauge pin? The M323.D21 gauge pin is intended for end-measure checks, fit testing and quick go/no-go verifications in workshop and production settings. Is the material suitable for heavy-duty inspection tasks? Yes, the pin is made from special steel, which provides enhanced wear resistance and stable contact geometry for routine inspection tasks. How precise is the diameter of the gauge pin? The M323.D21 is specified to a tolerance of ±0.002 mm, offering high repeatability for dimensional checks. Does the product come protected for transport? The gauge pin is delivered in a plastic or wooden transport box to protect the measuring end and surface finish during transit and storage. Can the M323.D21 be used for fixture setup and jig alignment? Yes, the 50 mm length and robust workshop design make this pin suitable for fixture setup, alignment and repetitive bore checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.22mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Benefit from the combination of ±0.002 mm repeatability, a precisely ground 13.22 mm diameter and a compact 50 mm length for dependable end‑dimension checks; order the M323.D22 directly via Metav Werkzeuge or contact the consultants for individual application support. Test pin, single, 13.22 mm, 50 mm length — Metav IndustryLine Test pin, single, 13.22 mm, 50 mm length is a workshop‑grade gauge pin designed for accurate end‑dimension inspection and fixture verification in production and quality‑control environments Workshop version, robust construction Diameter 13.22 mm, ground to tolerance High reproducibility: ±0.002 mm accuracy Reliable dimensional control for production inspections This workshop‑grade gauge pin is specified with a nominal diameter of 13.22 mm and a shank length of 50 mm, offering a compact geometry that simplifies insertion into fixtures and gauges. The documented positional tolerance of ±0.002 mm reflects high reproducibility across repeated checks and supports reliable go/no‑go verification and end‑dimension control. For production environments where fast, repeatable measurements reduce downstream rework, the combination of tight diameter control and short engagement length provides a practical balance between accessibility and measurement stability. Designed for consistent fit in gauges and fixtures The single‑piece format and precise outer diameter ensure consistent interfacing with bores, plug gauges and alignment jigs. The robust workshop execution reduces sensitivity to everyday handling without sacrificing dimensional integrity, so the pin remains a dependable reference during assembly and inspection tasks. Where interchangeability and tight fits matter, the measured tolerance minimises variability between pins and supports stable statistical process control (SPC) routines on the shop floor. Practical handling, traceability and sourcing Supplied as an individual test pin (M323.D22) and manufactured from a special steel, this component keeps inventories simple for maintenance and QA stocking. The modest mass facilitates quick manual use while the compact length aids access in confined fixtures. For further technical drawings, specific fit recommendations or batch traceability requests, Metav Werkzeuge provides detailed information and procurement options to support workshop integration and quality documentation. Contact Metav Werkzeuge for tailored supply of Metav IndustryLine test pins and expert advice on gauge integration and batch availability. Technical data Article number: M323.D22 GTIN: 4061905066962 ECLASS: 21170231 Facts Diameter: 13.22 mm Length: 50 mm Mass: 0.1 kg Dimensional accuracy: ±0.002 mm Special features Material: Special steel Version: Workshop execution Packaging: single item delivery FAQ What tolerance does the pin offer for precision checks? The test pin is specified with a dimensional accuracy of ±0.002 mm, which supports high repeatability for fine end‑dimension inspections. Is the material suitable for standard gauge applications? Yes, the M323.D22 is manufactured from a special steel aimed at workshop use and is suitable for typical gauge and fixture interfaces. Can the pin be used for alignment in fixtures as a reference element? The compact 50 mm length and precise 13.22 mm diameter make this gauge pin appropriate for use as a reference element in alignment and jigging applications. Is the item delivered as a single piece or in sets? This product is supplied as a single test pin (M323.D22), simplifying replacement and stocking in quality departments. How does the workshop version differ from a laboratory grade pin? The workshop version emphasises robustness for everyday handling while retaining tight dimensional control suitable for production inspection tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.23mm Gauge Pin, Single, 50mm Length, Special Steel, Workshop Version, Supplied in Case - Metav IndustryLine
Take advantage of the combination of industrial robustness, tight tolerance and traceable identification for reliable inspection routines; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application guidance. Gauge pin, single – 13.23 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single, 13.23 mm Ø, 50 mm length is a precision end‑measurement pin designed for workshop inspection and dimensional verification in production and quality control environments. Workshop version for robust use Precision tolerance ±0.002 mm Special steel construction 50 mm length with 13.23 mm diameter High precision for repeatable checks A compact inspection component that secures measurement chains: the gauge pin delivers precision at a ±0.002 mm tolerance, making it suitable for fine verification of bore diameters, end‑measure checks and gauge blocks. The tight tolerance reduces inspection uncertainty and shortens decision loops on the shop floor, so production problems can be detected earlier. The small footprint of the pin speeds handling and alignment in test jigs, supporting efficient in‑process and final inspection routines. Durable workshop design that withstands everyday use Engineered as a workshop version, this test pin combines practical handling with material robustness. The body is manufactured from special steel, which provides the stiffness needed for repeatable contact without excessive deformation; the part weight of 0.1 kg and its 50 mm length make it easy to place and extract in confined setups. The solid construction supports repeated seating in bores and fixtures, reducing wear-related measurement drift and helping to maintain stable inspection results over many cycles. Traceability and clear identification for quality systems Component identification is ready for industrial stockkeeping: M323.D23 is the internal article number and GTIN 4061905066979 provides a unique global identifier for procurement and traceability. The single‑item delivery simplifies selection for specific end‑measure checks and avoids mix‑ups in mixed sets of gauge pins. Supplied as a single gauge pin in the Messstifte category, this component integrates cleanly into quality documentation and part lists, helping to maintain orderly inspection records across shifts and production sites. Contact Metav Werkzeuge today to discuss the suitability of the Metav IndustryLine gauge pin M323.D23 for your inspection processes or to request a technical data sheet — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.D23 GTIN: 4061905066979 Manufacturer: Metav IndustryLine Facts Length: 50 mm Diameter: 13.23 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Execution: Workshop version Single item delivery Category: Messstifte FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.D23 is specified with a tolerance of ±0.002 mm, suitable for tight dimensional checks and precise go/no‑go comparisons in inspection tasks. Which material is used for the pin? The pin is made from special steel, chosen for rigidity and repeatable contact behaviour under normal workshop use. For which inspection tasks is this pin suitable? Typical uses include end‑measurement verification, bore checks and comparative testing in fixture and jig inspections where a precise reference diameter is required. Is this an individual item or part of a set? This product is supplied as a single gauge pin (single item delivery) intended for direct integration into bespoke inspection routines or for topping up existing pin assortments. How is the product identified for procurement and traceability? Use article number M323.D23 and GTIN 4061905066979 for ordering and inventory management; these identifiers ensure consistent traceability within quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.24mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
This compact gauge pin combines workshop durability, a tight ±0.002 mm tolerance and a useful 50 mm overall length to support reliable end‑measure checks and fixture alignment. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.D24 — individual precision pin, Ø13.24 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.D24 is a workshop‑grade precision test pin designed for end‑measure verification and fixture probing in machine shops and inspection benches. Workshop version for daily use Diameter 13.24 mm with ±0.002 accuracy 50 mm overall length for fixture testing Supplied in protective transport case Accurate dimensions for repeatable Go/No‑Go checks The pin is manufactured to a nominal diameter of 13.24 mm with a verified ±0.002 mm deviation, which makes it suitable for tasks that demand tight dimensional control. This level of accuracy supports consistent duplicate measurements and reduces rework by ensuring parts and fixtures meet defined limits. The compact geometry and defined length make the component straightforward to seat in gauges, jigs or mating holes, improving throughput in verification routines while maintaining traceable measurement quality. Robust construction that suits everyday workshop use Made from special steel, the pin is produced as a workshop version that balances wear resistance and handling robustness. The material choice and simple single‑piece design minimise the risk of deformation during repeated contact checks, supporting longevity in busy production environments. Supplied in a protective transport case, the component remains organised and protected in tool kits or inspection sets, reducing the chance of surface damage that could impair measurement fidelity. Easy integration into inspection and setup workflows As an individual gauge pin, the component is ideal for end‑measure and fixture alignment operations where a single, accurately sized reference is required. Its 50 mm length provides a practical reach for many clamping and probe situations without excess overhang, while the compact diameter simplifies storage and handling. The pin functions as a reliable reference for quick pass/fail checks or as a component of modular test sets, helping to speed up setup time and improve the reproducibility of routine inspection tasks. For workshop inspection components and dependable supply, request the M323.D24 from Metav Werkzeuge in Emmerich or consult our technical team via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.D24 GTIN: 4061905066986 Material: Special steel Weight: 0.1 kg Facts Diameter: 13.24 mm Length: 50 mm Tolerance: ±0.002 mm Special features Workshop version Single gauge pin Supplied in protective transport case Category: Gauge pins FAQ What applications is this gauge pin suited for? The gauge pin is intended for end‑measure checks, fixture alignment and plug‑type verification in machine shops and inspection benches; it serves as a compact reference pin for assembly and inspection tasks. How precise is the diameter of the pin? The diameter is specified at 13.24 mm with a deviation of ±0.002 mm, providing the dimensional precision required for tight control and repeatable measurements. What material is used for the pin? The pin is manufactured from special steel, chosen for workshop durability and stable dimensional behaviour under regular use. Is the pin supplied ready for transport and storage? Yes, the item is supplied in a protective transport case suitable for workshop handling and short‑term storage to prevent contact damage. Can this pin be used in modular gauge sets? The single gauge pin is compatible with common modular setups and can function as a standalone reference or as part of a combined inspection kit. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.25mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, tight dimensional tolerance and compact handling for reliable end‑dimension checks in production. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for application guidance. Gauge pin, single, 13.25 mm diameter — 50 mm length (Metav IndustryLine) The gauge pin 13.25 mm is a workshop‑grade precision pin for quick end‑dimension checks, fit testing and go/no‑go verification in manufacturing and inspection environments. Workshop‑grade construction Diameter 13.25 mm precision 50 mm overall length Dimensional tolerance ±0.002 mm Accurate checks without guesswork For process control and batch inspection, the gauge pin delivers measurable certainty: a dimensional tolerance of ±0.002 mm means the pin is suitable where fine tolerances matter and where repeatability reduces rework. The stated accuracy supports tight fit assessments and calibration checks; the nominal diameter 13.25 mm serves as a verifiable reference for hole gauges, fixtures and assembly trials. Explaining the figure: the tolerance reflects the maximum deviation from nominal diameter, ensuring that measurements remain within the expected production window and simplifying go/no‑go decisions on the shop floor. Durable workshop design for daily use Built as a workshop‑grade item from special steel, the pin is designed for repetitive handling and robust service life in industrial settings. The compact 50 mm length balances reach and stiffness, making the pin easy to seat and remove without excessive flex. With a listed mass of 0.1 kg the component is stable in holders and benches yet straightforward to manoeuvre by hand. Supplied in a protective transport case, the pin arrives ready for storage and safe transit between stations, preserving dimensional integrity between uses. Practical integration into quality workflows Traceability and identification are supported by the supplied SKU and GTIN, which simplify stock control and record keeping for incoming inspection and tool rooms. As a single‑piece precision reference, this pin reduces set‑up time for functional checks and integrates directly into existing gauge blocks, pins holders and dedicated inspection fixtures. The combination of compact dimensions, high repeatability and workshop robustness delivers an efficient solution for routine inspection tasks while contributing to a reduction in scrap and downtime. Contact Metav Werkzeuge today for application advice and reliable supply of the Metav IndustryLine gauge pin (M323.D25) for your inspection processes Technical Data Article number: M323.D25 GTIN: 4061905066993 Description: Gauge pin, single, 13.25 mm diameter, 50 mm length Manufacturer: Metav IndustryLine Facts Diameter: 13.25 mm Length: 50 mm Weight: 0.1 kg Dimensional tolerance: ±0.002 mm Special features Material: Special steel Workshop version Supplied in protective transport case FAQ What tolerance can be expected from this gauge pin? The gauge pin is specified with a dimensional tolerance of ±0.002 mm, ensuring high repeatability for end‑dimension checks and fit testing with the Metav IndustryLine pin. Is the pin suitable for mounting in common pin holders? Yes, the single gauge pin is intended for integration with standard pin holders and fixture systems and is identified as SKU M323.D25 for ordering. What material is used for the pin and how does it affect wear? The pin is made from special steel; this provides a balance of hardness and toughness appropriate for workshop use while offering durable surface life under normal inspection loads. Does the product include any transport or storage protection? The gauge pin is supplied in a protective transport case to preserve geometry during transport and storage, reducing the risk of handling damage. How is the item identified for procurement and inventory? Refer to GTIN 4061905066993 and SKU M323.D25 when ordering or logging the part in inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.26mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of workshop-ready accuracy and robust construction: the combination of a 13.26 mm nominal diameter, ±0.002 mm tolerance and a 50 mm usable length ensures repeatable bore checks and fewer rework cycles. Order directly via Metav Werkzeuge or consult our specialists for specification support. Gauge pin, single, 13.26 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin, single, 13.26 mm diameter, 50 mm length is a precision inspection pin designed for manual and quick verification of bore diameters in workshop and production-control environments. Workshop-grade construction for everyday use Nominal diameter 13.26 mm for end‑size checks Tolerance ±0.002 mm for high precision Delivered in a protective case for safe transport Reliable results for inline inspection The gauge pin M323.D26 delivers a clearly defined checking diameter of 13.26 mm with a nominal tolerance of ±0.002 mm, making it suitable for routine dimensional control where consistent conformity is required. The tight tolerance reduces measurement uncertainty and supports faster acceptance or rejection decisions on the shop floor, which helps to cut scrap rates and improves process stability in machining and assembly operations. Robust workshop design and straightforward handling Manufactured from special steel and built as a workshop execution, this inspection pin combines durability with easy handling. The 50 mm usable length provides sufficient engagement for many through‑bores and shallow blind holes without unnecessary overhang. At approximately 0.1 kg, the pin is convenient to handle during manual checks and is supplied in a protective case to prevent transport damage and to keep the gauge ready for immediate use. Traceability and practical use in production control The article is listed as M323.D26 (GTIN 4061905067006), which supports clear part identification in stock management and quality documentation. As a single gauge pin it is intended for direct dimensional checks and end‑size verification in fixtures, jigs and incoming inspection. Using a dedicated inspection pin for these tasks speeds up routine checks and complements existing measuring equipment in the inspection workflow. For workshop-ready precision from Metav IndustryLine, request technical advice or place an order with Metav Werkzeuge—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M323.D26 GTIN: 4061905067006 Label: Gauge pin, single, 13.26 mm diameter, 50 mm length Category: Gauge pins (Messstifte) Core specifications Diameter: 13.26 mm Usable length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Features / Applications Material: Special steel Workshop execution Delivered in protective case for transport Intended for end‑size and bore verification in production control FAQ What nominal diameter does the gauge pin provide? The gauge pin M323.D26 provides a nominal diameter of 13.26 mm for precise bore checks. What tolerance can be expected from this inspection pin? This inspection pin is specified with a tolerance of ±0.002 mm to support high repeatability in workshop inspections. Which material is used for the pin? The pin is manufactured from special steel and supplied in a workshop execution suitable for routine use. Is the pin supplied protected for transport? Yes, the gauge pin is delivered in a protective case to reduce the risk of damage during transport. What applications suit this gauge pin best? The pin suits manual inspection of hole diameters, end‑size verification and quick pass/fail checks in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.27mm Test Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Benefit from precise end‑measure verification thanks to ±0.002 mm repeatability and a robust special‑steel construction; the compact 50 mm length with 13.27 mm diameter makes the pin ideal for routine inspection tasks. Order the item directly via Metav Werkzeuge or consult our advisors for specification matching. Gauge Pin M323.D27 — 13.27 mm diameter, 50 mm length (Workshop version) Gauge Pin M323.D27 designed for dimensional checks and end‑measurement verification in workshop and inspection environments Workshop version for robust daily use Diameter 13.27 mm for end‑measure verification Hardened special steel construction Delivered in protective transport case Reduce rework with micrometre‑grade repeatability The compact gauge pin offers a verified measuring tolerance of ±0.002 mm, which translates into reliable dimensional checks and fewer repeat measurements. For production and quality control, such precision reduces the incidence of scrap and rework by catching deviations early. The clearly defined 13.27 mm diameter provides a stable reference for plug checks and comparative gauging, improving process stability. Built to withstand workshop handling and transport Constructed from special steel, the pin sustains repeated use in routine inspection and assembly work. The 50 mm measuring length balances accessibility and rigidity, keeping deflection to a minimum while remaining easy to handle. Delivered in a protective transport case, the unit arrives ready for safe storage and mobility between workstations, ensuring the measuring surface remains protected and consistent over time. Integrates easily into inspection routines and fixtures The plain design supports simple fixture integration for repeat gauging operations or end‑of‑line checks. Its nominal dimensions and workshop version specification make it suitable for inline verification and manual quality stations, where quick, repeatable verification is required. Stocking the Metav IndustryLine pin streamlines sourcing and ensures a consistent, European‑filtered quality standard for regular inspection tasks. Request the Metav IndustryLine gauge pin M323.D27 through Metav Werkzeuge for a reliable addition to inspection benches, or contact our specialists in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice Technical data Article number: M323.D27 GTIN: 4061905067884 SKU: M323.D27 Facts Diameter: 13.27 mm Measuring length: 50 mm Tolerance: ±0.002 mm Weight: 0.10 kg Special features Material: Special steel Workshop version Delivered in protective transport case FAQ What applications is this gauge pin suitable for? The gauge pin M323.D27 (Metav IndustryLine) is intended for end‑measure verification, plug checking and routine dimensional control in workshop and inspection settings. What material is the pin made from? The M323.D27 is manufactured from special steel, chosen for wear resistance and stability under repeated use. How precise is the measurement tolerance of the pin? The Metav IndustryLine gauge pin M323.D27 is specified with a measurement tolerance of ±0.002 mm, suitable for fine inspection tasks. Is the pin supplied ready for transport and storage? Delivery of the M323.D27 includes a protective transport case, ensuring the measuring face remains protected during handling and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.28mm Gauge Pin, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Compact precision and robust workshop performance combine in this gauge pin: 13.28 mm nominal diameter, 50 mm length and a manufacturing tolerance of ±0.002 mm ensure repeatable referencing and dependable fit checks. Supplied in a protective transport case and made from special steel, it is ready for routine inspection work. Order the part directly via Metav Werkzeuge or contact our consultants for application advice. Test Pin M323.D28 – Gauge pin, 13.28 mm Ø, 50 mm length (Metav IndustryLine) A Test Pin M323.D28 designed for precise end‑measurements and repeatable reference points in workshop metrology and inspection tasks. Workshop-grade construction Diameter 13.28 mm for tight fits Length 50 mm for deep reference points Tolerance ±0.002 mm for high repeatability Dependable tolerance for repeatable results The gauge pin is manufactured to a fine dimensional tolerance of ±0.002 mm, which translates directly into reduced scatter during go/no‑go checks and quicker decision cycles at the inspection bench. Such repeatability benefits process control by lowering rework rates and easing documentation of conformity. The stated accuracy is suitable for demanding workshop metrology where confident pass/fail judgements are required. Compact geometry that suits fixturing and gauges With a nominal diameter of 13.28 mm and a working length of 50 mm, the pin offers a compact form that fits many plug checks, fixture locators and assembly gauges. The moderate length provides access into pockets or stepped bores while maintaining stiffness for reliable contact. The component’s workshop specification and special steel construction support long service life under regular use, making it a practical tool for machining and inspection workflows. Practical delivery and handling for the shop floor Supplied in a protective case for transport, the pin arrives ready to be stored and moved without additional packing. The workshop execution emphasises robustness and ease of handling: the compact mass and finished surfaces simplify insertion and extraction during repetitive checks. Where traceability or records are needed, the goods can be integrated into existing inspection routines without lengthy preparation. For consistent gauge references request the M323.D28 from Metav IndustryLine via Metav Werkzeuge — Metav’s Emmerich team can advise on integration and supply at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.D28 GTIN: 4061905067891 Manufacturer: Metav IndustryLine Facts Nominal diameter: 13.28 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Supplied in a protective transport case FAQ What tolerance can be expected from this gauge pin? The M323.D28 test pin is manufactured to a tolerance of ±0.002 mm, ensuring tight repeatability for workshop inspection tasks. Is the pin suitable for use in fixtures and gauges? Yes, the pin’s 13.28 mm diameter and 50 mm length make it well suited as a locating or reference element in gauges and fixtures; the workshop execution supports regular use. What material is the pin made from and how does that affect wear? The pin is made from special steel, which provides a durable contact surface and good resistance to wear under normal inspection cycles. Is the pin delivered ready for storage and transport? The product is supplied in a protective transport case, which simplifies handling and protects the pin during storage and movement. Can this pin be used for tight fit checks and end‑measurements? The dimensional specification and fine tolerance make the product suitable for tight fit checks and reliable end‑measurement references in many shop applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.29mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Thanks to its combination of high repeatability and robust workshop construction, this gauge pin delivers reliable end-measurement results with minimal setup time. Benefit from ±0.002 mm accuracy and a compact 50 mm length for stable handling; order directly via Metav Werkzeuge or consult our specialists for integration into inspection routines. Gauge pin, single — 13.29 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin, single, 13.29 mm, length 50 mm is a precision measurement pin designed for end-dimension checks and routine inspection tasks in workshop and production environments. Workshop execution, robust construction Diameter 13.29 mm for precise end measurements Length 50 mm for stable handling Accuracy ±0.002 mm for repeatable results Repeatable end measurements with micron-level precision The precision pin offers an accuracy of ±0.002 mm (±2 µm), providing a measurable advantage where repeatability matters. Manufactured from special steel, the pin resists routine wear and maintains contact geometry during serial checks. This level of precision reduces measurement scatter in incoming inspection and process control, translating into fewer rejects and more reliable pass/fail decisions on the shop floor. Built for workshop use and straightforward handling A compact 50 mm length pairs with the 13.29 mm diameter to give a stiff, easy-to-handle gauge that stays stable during placement. The workshop execution balances toughness and dimensional stability so that the pin can be used repeatedly in test benches, fixtures or manual go/no-go checks without complex fixturing. Its modest weight and straightforward geometry simplify handling, which speeds up inspection cycles and reduces operator fatigue. Integration into inspection workflows and traceable documentation This single gauge pin is suited to end-measurement tasks in inspection benches, gauges and comparative setups. As a standardised measurement element, it can be incorporated into modular test fixtures or used as a reference pin for quick checks during setup. The compact dimensions and industry-standard construction allow easy interchange with other precision plugs in inspection sets, supporting consistent quality assurance across production steps. Contact Metav Werkzeuge today for product matching and ordering of the Metav IndustryLine gauge pin — Metav’s specialists in Emmerich will advise on application fit and supply logistics via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.D29 GTIN: 4061905067907 Brand: Metav IndustryLine Facts Diameter: 13.29 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Execution: Workshop version Application: End measurements ECLASS: 21170231 FAQ What tolerance does the gauge pin provide? The gauge pin has an accuracy of ±0.002 mm, suitable for repeatable end-dimension checks in routine inspection. Which material is used for the pin? The pin is manufactured from special steel, chosen for dimensional stability and wear resistance in workshop applications. Is the pin suitable for bench and fixture use? Yes; the workshop execution and the 50 mm length make this pin appropriate for test benches, fixtures and manual comparative checks. What are the exact dimensions and identifiers for ordering? Diameter 13.29 mm, length 50 mm, SKU M323.D29, GTIN 4061905067907; brand Metav IndustryLine. How does the pin support process control? As a standardised measurement element, the pin provides repeatable end measurements that reduce scatter in inspections and support consistent quality decisions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.2mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
The combination of 13.2 mm diameter, a 50 mm length and a verified tolerance of ±0.002 mm delivers reliable hole gauging for workshop and production checks; ideal for repeated use in assembly and inspection tasks. Order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. M323.D20 – Single Gauge Pin (13.2 mm Ø, 50 mm length) by Metav IndustryLine The M323.D20 is a single precision gauge pin designed for workshop measurement and hole verification in machining and inspection workflows. Workshop version for robust daily use Diameter 13.2 mm for accurate hole checking Length 50 mm suitable for through and blind holes Special steel construction, precision ground Precision where it matters for production control The gauge pin provides a clear, measurable reference for bore and fit inspection. With a 13.2 mm diameter produced to an allowance of ±0.002 mm, the pin supports tight tolerance checks in serial production and manual inspection stations. The special steel construction is precision ground, reducing surface variations that can skew measurements and ensuring consistent contact with mating bores. This focus on dimensional stability reduces rework and speeds up quality decisions on the shop floor. Robust design for workshop environments Designed as a workshop version, this single gauge pin tolerates everyday handling and repeated seating in jigs and fixtures. At an overall 50 mm length it offers good accessibility for both through and partially blind bores while remaining manageable for single-operator use. The construction balances stiffness and wear resistance, so the pin maintains its geometry through repeated cycles and provides a reproducible reference for pass/fail checks in maintenance, incoming inspection and assembly. Practical benefits and inspection efficiency Using a dedicated gauge pin simplifies go/no-go assessments and streamlines inspection routines: a clearly defined diameter and certified tolerance removes subjective judgement from fit checks. The compact weight and form factor allow quick swapping between gauges in a bench set-up or insertion into holders and mandrels. For traceability and inventory, the item is listed under SKU M323.D20 and GTIN 4061905066276, which helps integrate the pin into existing procurement and quality records. For precise bore verification and dependable workshop performance trust Metav IndustryLine—contact Metav Werkzeuge for procurement and technical guidance at info@metav-werkzeuge.com or by phone; support is available from the Metav team. Technical data Article number: M323.D20 GTIN: 4061905066276 Label: Prüfstift, einzeln, 13,2 mm Länge 50 mm Facts Diameter: 13.2 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Material: Special steel Precision ground surface SKU: M323.D20 FAQ What tolerance can be expected from this gauge pin? The gauge pin is manufactured to a tolerance of ±0.002 mm, making the M323.D20 suitable for fine inspection tasks that require tight dimensional control. Which materials is the pin suitable for checking? The M323.D20 serves as a dimensional reference for bores regardless of workpiece material; the pin itself is made from special steel to ensure durability and wear resistance during repeated checks. How is the gauge pin identified for inventory and traceability? Identification is supported by SKU M323.D20 and GTIN 4061905066276, which can be recorded in quality systems and procurement lists for traceable handling. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.3 mm Gauge Pin Length 50 mm Workshop Version Plastic Case - Metav IndustryLine
Take advantage of the combination of precision, robust workshop construction and practical traceability for reliable end‑measurement checks; the 13.3 mm diameter and 50 mm length ensure consistent fit control while the delivery in a protective case supports safe transport and storage. Order the gauge pin directly via Metav Werkzeuge or ask our consultants for application advice. Gauge pin M323.D30 — single precision test pin, Ø13.3 mm, 50 mm length (Metav IndustryLine workshop version) The gauge pin M323.D30 is a single, workshop‑grade test pin designed for precise end‑measurements and fit verification of bores and components with a 13.3 mm nominal diameter and a 50 mm shank. Workshop‑grade execution Diameter 13.30 mm for tight fits Length 50 mm with robust shank Tolerance ±0.002 mm for precise checks Precision that supports repeatable end‑measurements The pin provides a stable reference for checking seatings, bores and mating fits thanks to its ±0.002 mm specification, which delivers highly repeatable results for routine validation tasks. This level of control reduces uncertainty in pass/fail decisions and shortens inspection cycles, transforming measurement data into reliable evidence for quality documentation. The 13.3 mm diameter is optimised for tight fits where small deviations matter, so operators benefit from reduced rework and clearer acceptance criteria. Built for workshop durability and safe handling Manufactured from special steel and specified as a workshop version, the probe combines surface strength with form stability for frequent handling. The 50 mm shank offers a comfortable gripping length without compromising stiffness, making the pin suitable for bench inspection, fixture checks and slip‑fit controls. Delivery in a protective case ensures the item arrives ready for use and remains protected during transport, preventing nicks that would otherwise affect measurement integrity. Practical use and straightforward operation The design is intentionally simple: a single, precision ground pin that serves as a direct reference in assembly checks, gauge stacks or comparator setups. The compact geometry and robust shank enable quick manual positioning and easier access into deep or recessed bores. Operators unfamiliar with specialist terminology will appreciate that the device performs a single, clear function — accurate end‑measurement — with no additional adjustment required, which speeds up inspection routines and lowers the training threshold. Confidence through specification and distribution Traceability is supported by clear technical data and Metav’s quality infrastructure, which acts as a practical quality filter for the European market. The combination of defined tolerance, resilient construction and controlled delivery reduces the risk of non‑conforming checks entering production. For workshop and maintenance environments where reproducibility matters, this small tool contributes directly to process reliability and the documentation chain required for internal QA. For procurement or technical queries about Metav IndustryLine gauge pins, contact Metav Werkzeuge for personalised advice and ordering—email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: M323.D30 GTIN: 4061905067914 Brand: Metav IndustryLine Category: Gauge pins Label: Gauge pin, single, Ø13.3 mm, length 50 mm Core measurements Diameter: 13.3 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Materials and features Material: special steel Workshop version Delivered in protective case FAQ What is the intended use of this gauge pin? The gauge pin M323.D30 is intended for end‑measurement checks, bore verification and fit control where a 13.3 mm reference is required. What tolerance can be expected from the test pin? The test pin is specified with a tolerance of ±0.002 mm, providing repeatable checks for workshop inspection tasks. Is the pin supplied ready to use and protected? Yes, the M323.D30 is delivered in a protective case suitable for transport and safe storage to preserve the measurement surface. Which material is used for the probe? The probe is manufactured from special steel chosen for dimensional stability and resistance to frequent handling. Can this pin be used for precision gauge stacking? The robust shank and precise diameter make the pin suitable for incorporation into gauge stacks and comparative setups in workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.31mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of precise diameter control, workshop-grade robustness and traceable identification for reliable inspection results; order directly via Metav Werkzeuge or consult our specialists for application advice M323.D31 Gauge pin — single gauge pin, 13.31 mm diameter, 50 mm length (Metav IndustryLine) A M323.D31 gauge pin designed for accurate end‑measurements, alignment and inspection tasks in workshop and quality‑control environments Workshop version for robust daily use Diameter 13.31 mm with ±0.002 mm accuracy Compact 50 mm length for tight inspection spaces Single item with clear traceability via SKU and GTIN Precision that reduces rework and speeds inspection A compact inspection pin with a nominal diameter of 13.31 mm, manufactured from special steel, delivers repeatable contact geometry for small bores and gauge fixtures. The tight tolerance of ±0.002 mm provides the confidence needed for go/no‑go checks, bore alignment and plunger‑style verification. By standardising on a precisely ground reference pin, measurement loops become more predictable and setup times fall, which supports improved throughput in repetitive inspection tasks. Built for everyday workshop conditions This workshop‑grade reference pin combines a short, firm profile with low mass (approx. 0.1 kg) and a 50 mm working length, making it easy to handle during rapid checks and tool setting. The robust material choice ensures dimensional stability under typical shop temperatures and handling. Supplied as a single unit, the component integrates seamlessly into jigs and test rigs and serves as a dependable reference in small‑part production, reducing uncertainty at the inspection stage. Traceability and inventory integration for quality systems Identification by SKU M323.D31 and GTIN 4061905067921 supports inventory control and audit trails within quality management systems. The simple, unambiguous specification (diameter, length, material and tolerance) makes the pin straightforward to list in bills of materials and measurement plans. Using clearly referenced master parts such as this pin helps maintain reproducibility across shifts and sites and simplifies procurement within larger supply chains. For secure, repeatable inspection with the M323.D31 gauge pin, contact Metav Werkzeuge for availability and expert advice—Metav Werkzeuge is your partner for precision tools and can be reached at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data SKU: M323.D31 GTIN: 4061905067921 Manufacturer: Metav IndustryLine Facts Diameter: 13.31 mm Length: 50 mm Accuracy/Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Delivery: single gauge pin Designation: Workshop execution eClass: 21170231 Story trigger: end‑measurements FAQ What is the nominal diameter and tolerance of the pin? The nominal diameter is 13.31 mm with a dimensional tolerance of ±0.002 mm for the M323.D31 gauge pin. Which material is used for this gauge pin? The pin is manufactured from special steel, chosen for dimensional stability and workshop suitability. Is the pin supplied as a single item or in a set? This product is supplied as a single gauge pin marked as SKU M323.D31. What applications is this pin suited to? The pin is intended for end‑measurements, bore alignment, fixture setting and routine inspection tasks in workshop and production contexts. How does the M323.D31 support quality systems? Traceability via SKU M323.D31 and GTIN 4061905067921 allows easy integration into inventory lists, measurement plans and audit documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.32mm Go/No-Go Gauge Pin 50mm Workshop Version, Special Steel - Metav IndustryLine
Benefit from the combination of a 13.32 mm diameter, ±0.002 mm accuracy and robust special steel construction for consistent inspection results; the compact 50 mm length supports safe handling in fixtures and gauges. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.D32 — single precision test pin, 13.32 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.D32 is a single precision test pin designed for end‑measure checks and workshop inspection tasks where repeatable diameter reference and compact handling are required. Precision diameter 13.32 mm, ±0.002 accuracy Short 50 mm length for secure fixture handling Special steel for long wear resistance Delivered in a protective box for transport Reduce rework with measurable precision A consistent production flow depends on measurable, repeatable checks. The gauge pin provides a 13.32 mm reference diameter with a verified ±0.002 mm deviation, which translates into reliable pass/fail verification at assembly or inspection stations. This level of control reduces rework and scrap by tightening the dimensional gate early in process chains. The calculation of tolerances and the narrow accuracy band support efficient quality decisions and fewer stoppages during serial checks. Robust construction for everyday workshop use Constructed from special steel, the pin resists wear and maintains dimensional integrity under frequent insertion and withdrawal cycles. The workshop‑grade finish and material selection minimise surface damage that can bias measurements over time. As a result, maintenance intervals are extended and replacement costs are reduced — a practical advantage for production environments where tools are used continuously and downtime carries a measurable cost. Compact format that fits tight assemblies With a length of 50 mm, the test pin offers safe handling in confined fixturing and gauge housings without excess overhang. The short form factor improves accessibility to end faces and bores in compact components, while retaining sufficient mass for steady handling. This balance between reach and rigidity benefits measurement technicians who require a stable datum in tight assemblies and in-process inspection jigs. Protected delivery for transport and workshop logistics The article is supplied in a protective box suitable for transport, reducing the risk of accidental knocks or corrosion during storage or transit; the packaging is primarily intended to safeguard the tool rather than for permanent storage. Robust packaging supports reliable logistics and ensures the pin reaches the bench ready for immediate use, preserving the factory calibration and surface condition expected for precision inspection tools. Practical application and integration in inspection routines The gauge pin serves as a straightforward reference for go/no‑go checks, comparator setups and quick end‑measure verification in a wide range of workshop and inspection workflows. Its compact dimensions and tight tolerance make it suitable for routine quality control in metalworking and assembly processes. For operations seeking standardised reference artefacts, this test pin integrates easily into existing gauge sets and fixture designs. Contact Metav Werkzeuge to discuss how the Metav IndustryLine gauge pin M323.D32 with a 13.32 mm diameter and ±0.002 mm accuracy fits into inspection workflows, or to place an order by phone (+49 2822 7131930) or e‑mail (info@metav-werkzeuge.com) Technical data Article number: M323.D32 GTIN: 4061905067938 Manufacturer: Metav IndustryLine Label: Gauge pin, single, 13.32 mm diameter, length 50 mm Facts Diameter: 13.32 mm Length: 50 mm Weight: 0.1 kg Accuracy / tolerance: ±0.002 mm Category: Gauge pins (Messstifte) Special features Material: special steel Workshop execution (Werkstatt‑Ausführung) Supplied in a protective box for transport Single test pin for end‑measure checks Compact format for tight fixtures FAQ What is the declared tolerance of this gauge pin? The gauge pin M323.D32 is specified with a tolerance of ±0.002 mm, which defines the acceptable deviation from the nominal 13.32 mm diameter for inspection tasks. Is the pin suitable for repeated use in production checks? Yes, the special steel construction and workshop design make the test pin suitable for frequent insertion and withdrawal cycles common in production verification. Can the pin be used as a reference in comparator fixtures? The compact 50 mm length and stable diameter make the pin appropriate as a reference element in comparator setups and custom fixture applications. How does the protective box affect storage? The protective box is supplied to safeguard the pin during transport and handling; it offers short‑term protection but is not recommended as the primary long‑term storage solution for precision artefacts. Which industries or applications benefit most from this gauge pin? The pin is well suited to metalworking inspections, assembly line end‑measure checks and small‑part verification where a high‑precision diameter reference is required; it integrates easily with standard gauge sets and fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.33mm Gauge Pin, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from workshop‑grade reliability and repeatable end‑measure checks through a combination of special steel construction, tight tolerance control and compact geometry; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.D33 — 13.33 mm diameter, 50 mm length (Workshop version) The gauge pin M323.D33 is a single verification pin for precise end‑measure checks in workshop environments, designed as a robust workshop version for routine inspection and fixture testing. Workshop version, robust design Diameter 13.33 mm, precision ±0.002 mm Length 50 mm for standard end‑measure checks Supplied in protective transport case Precision for end‑measure verification The gauge pin M323.D33 offers a compact solution for accurate plug‑type inspections and end‑measure verification. With a nominal diameter of 13.33 mm and an indicated accuracy of ±0.002 mm, this pin is engineered for situations where tight tolerance control matters. Classified within the Micro range (10–100 mm), it is particularly suited to small components and fine mechanical assemblies where repeatability across multiple checks reduces rework and ensures consistent assembly fits. The short, stable geometry minimises bending and contributes to reproducible results when used in gauges, jigs or fixture setups. Built for workshop durability and easy handling Manufactured from special steel, the pin combines wear resistance with dimensional stability under routine workshop use. Its overall 50 mm length balances reach and stiffness, making it simple to handle during rapid inspection cycles while remaining resistant to distortion. Supplied in a protective transport case, the item is protected during storage and shipment, which preserves surface quality and measurement integrity. The workshop specification signals a focus on functionality and longevity rather than fragile laboratory finish, ensuring a practical tool for day‑to‑day quality control. Smooth integration into inspection processes This single verification pin integrates cleanly into existing inspection and fixture workflows, allowing straightforward assembly checks and go/no‑go validation steps. The compact form factor reduces the need for extensive fixture adaptations and the consistent diameter supports repeatable locating and alignment tasks. For procurement and stock management, Metav IndustryLine provides a reliable supply channel and a quality filter that serves the European market from Emmerich, helping workshops and small manufacturers maintain steady availability of essential inspection items. For bespoke bundle requirements or inventory planning, the M323.D33 can be listed by its SKU when coordinating orders. For workshop‑grade end‑measure verification and reliable supply, request availability from Metav Werkzeuge—phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and rapid delivery Technical data Article number: M323.D33 GTIN: 4061905067945 SKU: M323.D33 Category: Gauge pins Facts Diameter: 13.33 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: Special steel Workshop version Single pin delivery Supplied in protective transport case FAQ What are the principal dimensions of this pin? The gauge pin M323.D33 has a diameter of 13.33 mm and an overall length of 50 mm. What accuracy can be expected during checks? The specified accuracy for the M323.D33 is ±0.002 mm, suitable for fine mechanical inspection tasks. What material is used for the pin? The M323.D33 is made from special steel and designed for workshop durability. Is the pin supplied ready for transport and storage? Yes, the M323.D33 is supplied in a protective transport case to preserve surface condition and dimensional integrity. Which applications suit this gauge pin? Designed for end‑measure checks and plug‑type inspections, the M323.D33 is classified as a micro gauge ideal for small components and fixture testing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.34mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the ±0.002 mm accuracy and robust special steel in a compact 50 mm form to ensure consistent end‑measurement results; order the gauge pin directly via Metav Werkzeuge or request technical advice from our consultants. Gauge pin M323.D34 — 13.34 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin M323.D34 designed for precise end‑measurements, inspection and workshop use *Precision tolerance ±0.002 mm *Special steel for durable contact *50 mm length for end‑measurement tasks Reliable repeatability for end‑measurement checks The ±0.002 mm specification gives this gauge pin a level of precision suitable for fine inspection tasks where repeatability matters. As a hardened, cylindrical reference, the pin is intended for consistent end‑measurement and fit checks in fixtures and gauges; the clearly defined 13.34 mm diameter provides a single, traceable datum that minimises ambiguity in pass/fail evaluations. Using a dedicated gauge pin for end dimensions reduces setup time and the risk of measurement scatter compared with improvised mandrels or worn reference plugs. Built for everyday workshop resilience Constructed from special steel and offered in a workshop‑grade configuration, the pin withstands routine handling and contact with mating parts. The compact 50 mm length balances rigidity and ease of handling, limiting deflection during seating and making the pin comfortable to position in tight inspection stations. Supplied as a single tool for direct use, the design focuses on long service life and repeatable contact surfaces, helping to maintain measurement quality across repetitive production processes. Easy integration into inspection workflows The single‑piece format fits straightforwardly into existing go/no‑go fixtures, plug gauges and assembly checks; its simple geometry streamlines gauging procedures and speeds throughput on the shop floor. Delivered with transport protection, the pin arrives ready for storage in a toolbox or for daily use at the bench, supporting a predictable inspection routine. Metav Werkzeuge’s sourcing and stock approach further reduces lead times and supports uninterrupted production by keeping precision references available when needed. Talk to Metav Werkzeuge in Emmerich for application advice and fast supply of the M323.D34 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.D34 GTIN: 4061905068119 Manufacturer: Metav IndustryLine Facts Diameter: 13.34 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Single gauge pin for end measurements Delivered in protective transport case (plastic or wooden) FAQ What measurement accuracy does this gauge pin offer? The M323.D34 gauge pin is specified with an accuracy of ±0.002 mm, suitable for fine inspection and repeatability checks. Which material is used for the pin? The pin is made from special steel in a workshop‑grade finish, chosen for durable contact surfaces and longevity. For which tasks is this pin best suited? It is intended for end‑measurement checks, fit and assembly testing, and use as a reference plug in inspection fixtures. Is the gauge pin delivered with protective packaging? Yes, delivery includes a protective transport case (plastic or wooden) to safeguard the pin during shipment and storage. What are the article number and GTIN for ordering? Article number (SKU): M323.D34; GTIN: 4061905068119 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.35mm Test Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of workshop-grade robustness and high repeatability thanks to 13.35 mm diameter, 50 mm length and an accuracy of ±0.002 mm; order the gauge pin directly via Metav Werkzeuge or consult our experts for supply and application support. M323.D35 gauge pin — 13.35 mm Ø, 50 mm length (Metav IndustryLine) The M323.D35 is a single gauge pin designed for precise end measurements and reference checks in workshop and quality‑control environments. Gauge pin Ø 13.35 mm, length 50 mm Workshop-grade special steel construction Dimensional accuracy ±0.002 mm Compact format for end measurements Consistent precision for end‑of‑line inspection The compact design focuses on repeatable, measurable outcomes: with a diameter of 13.35 mm and a stated accuracy of ±0.002 mm, this pin is suited to tight tolerance checks where small deviations have large consequences. The specified tolerance supports reliable Go/No‑Go and reference measurements in fixtures and gauges, reducing rework and inspection time. As a single‑piece reference, the component minimises alignment ambiguity and simplifies the measurement workflow. Built for everyday workshop use Constructed from special steel and labelled as a workshop‑grade item, the pin balances toughness with dimensional stability. The 50 mm length provides sufficient engagement for end measurements while remaining easy to handle and store. The robust material choice helps resist surface damage during frequent seating and withdrawal operations, extending service life and lowering life‑cycle cost compared with softer test pieces. Simple integration into inspection routines Intended for end measurements and reference tasks, the pin slots easily into existing plug gauge sets, fixture pockets and bench checks. The clear specification of 13.35 mm and the compact format support efficient inventory management and rapid identification in busy quality departments. Traceability is supported by the offer of a manufacturer SKU and GTIN for catalogue procurement and process documentation. For workshop‑ready precision from Metav IndustryLine, contact Metav Werkzeuge GmbH in Emmerich for availability and tailored advice. Technical data Article number: M323.D35 GTIN: 4061905068928 Manufacturer: Metav IndustryLine Core data Diameter: 13.35 mm Length: 50 mm Weight: 0.1 kg Accuracy (tolerance): ±0.002 mm Special features Material: special steel Workshop version Intended use: end measurements FAQ What measurement tasks is this pin intended for? The M323.D35 gauge pin is intended primarily for end measurements and use as a reference or checking pin in workshop and quality‑control applications. What tolerance can be expected from this gauge pin? The pin is specified with a dimensional accuracy of ±0.002 mm, which supports repeatable checks for tight tolerance workflows. Which material is used for the pin and why does it matter? The pin is made from special steel, chosen for wear resistance and dimensional stability during frequent seating and removal. Can this gauge pin be used in fixture locating holes? Yes — the compact 50 mm length and accurate diameter make it suitable for locating, reference checks and integration in fixture pockets. How is the item identified for ordering and documentation? Order and documentation can reference the article number M323.D35 and GTIN 4061905068928 for unambiguous procurement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.36mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise dimensional control with a 13.36 mm / 50 mm gauge pin that combines tight tolerance, robust material and safe transport packaging for reliable inspection workflows; order directly via Metav Werkzeuge or request application advice from our consultants. Gauge pin, single M323.D36 – 13.36 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin, single, 13.36 mm, length 50 mm is a precision test pin designed for end‑measurement and reference checks in workshop inspection and assembly environments. Precision tolerance ±0.002 mm Diameter 13.36 mm, length 50 mm Special steel for durability Supplied in protective case Precise checks that speed up inspection routines This gauge pin delivers repeatable dimensional checks thanks to a nominal diameter of 13.36 mm and a verified tolerance of ±0.002 mm. Such fine tolerance supports fast Go/No‑Go and reference measurements within quality control processes, reducing rework by making deviations visible at first inspection. The compact 50 mm length keeps handling straightforward while ensuring contact stability for end‑face and through‑hole assessments, helping to maintain steady production throughput. Built for workshop use and long service life Constructed from Special steel in a workshop version finish, the pin combines surface hardness with corrosion resistance appropriate for routine metrology tasks. The robust material choice enhances wear resistance during repeated engagement with housings and bores, extending service intervals and lowering replacement frequency. Supplied in a protective case, the pin arrives ready for storage or transport without risking surface damage, preserving measurement integrity between uses. Easy integration into inspection setups Designed as a straightforward reference element, this plug‑style test pin integrates with benches, fixture arrays and manual gauge sets. The consistent geometry of the shaft simplifies comparative measurement and calibration checks when used alongside other reference tools. By specifying a component with ±0.002 mm accuracy, inspection plans can rely on narrower acceptance bands and clearer pass/fail criteria, supporting tighter quality targets and traceable processes. Clear identification and handling information Product identification is straightforward for inventory and traceability: the item is listed under SKU M323.D36 and packaged for safe handling. The modest mass and compact dimensions mean the pin is convenient to include in inspection kits and portable measuring sets, providing a dependable reference that fits alongside other workshop gauges without adding bulk. Discuss application requirements with Metav Werkzeuge to ensure optimal use of this Metav IndustryLine gauge pin and arrange supply directly from our Emmerich site. Technical Data SKU: M323.D36 GTIN: 4061905068935 Brand: Metav IndustryLine Facts Diameter: 13.36 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Packaging: Supplied in protective case Category: Gauge pins (Messstifte) FAQ What are the exact dimensions of the pin? The gauge pin has a diameter of 13.36 mm and a length of 50 mm; identified as SKU M323.D36. What tolerance can be expected from this gauge pin? The pin is specified with a dimensional tolerance of ±0.002 mm. Which material is used for the pin? The shaft is made from Special steel in a workshop‑grade finish for enhanced durability. Is the pin delivered ready for safe storage and transport? Yes, the item is supplied in a protective case to prevent surface damage during storage and transit. What inspection tasks is this pin suited for? It is suitable for end‑measurement, reference checks and bore verification as part of routine workshop quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.37mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of workshop-grade precision and compact handling: the 13.37 mm diameter with a manufacturing variation of ±0.002 mm and the 50 mm overall length ensure repeatable gauging in inspection and assembly routines. Order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.D37 — 13.37 mm test pin, 50 mm length | Metav IndustryLine The Gauge pin M323.D37 is a single, workshop-grade test pin designed for accurate diameter checks and fit verifications in inspection, fixture and assembly operations. Workshop-grade for industrial use Diameter 13.37 mm with ±0.002 mm tolerance Length 50 mm, special steel construction Consistent accuracy for routine inspection needs The compact test pin delivers a 13.37 mm diameter with a verified manufacturing variation of ±0.002 mm, providing a reliable reference for pass/fail checks and gauge-fitting tasks. This level of dimensional control makes the pin suitable for repetitive inspection routines where small deviations influence assembly quality. The tight tolerance reduces rework and speeds up decision-making on the shop floor by giving measurable, comparable results that can be recorded in quality logs. Robust, workshop-ready construction that lasts Constructed from special steel in a workshop-grade finish, the pin is engineered for repeated handling and contact with mating parts. The 50 mm overall length offers secure grip without excessive overhang, improving repeatability when used with gauge blocks, fixtures or hand-held checking tools. Low mass (approx. 0.1 kg) and a compact profile simplify handling and storage in typical inspection kits while preserving surface integrity and roundness over many cycles. Practical integration into inspection flows Sold as a single test pin, this component integrates straightforwardly into existing gauge sets, assembly jigs and inspection benches. The clear labelling and traceable identifiers simplify inventory and part matching during process audits. Workshop environments benefit from the combination of small footprint and high repeatability, which supports quicker takt times in assembly verification and reduces the need for multiple compensating checks. Choose the Metav IndustryLine workshop-grade gauge pin for reliable, repeatable diameter checks and contact Metav Werkzeuge for procurement or technical guidance at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.D37 GTIN: 4061905068942 Manufacturer: Metav IndustryLine Facts Diameter: 13.37 mm Length: 50 mm Accuracy variation: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop-grade (Werkstatt-Ausführung) Sales form: single test pin (einzeln) SKU: M323.D37 FAQ What applications is this test pin suited for? The M323.D37 gauge pin is suited for diameter verification, fit checks, fixture alignment and routine inspection tasks in production and workshop environments. How precise is the diameter of the pin? The pin is manufactured to a diameter of 13.37 mm with a variation of ±0.002 mm, providing consistent reference values for gauging and acceptance testing. What material is used for the pin and why does it matter? The pin is made from special steel, which offers high wear resistance and dimensional stability during repeated use in inspection and assembly operations. Is the pin supplied as part of a set or individually? This item is supplied as a single test pin; it is intended for standalone use or integration into existing gauge kits and fixtures. Can this pin be used with gauge blocks and fixtures? Yes, the compact 50 mm length and stable diameter make it compatible with standard gauge blocks, fixtures and jig checks commonly used in workshops. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.38mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of a compact, workshop-grade test pin that combines 13.38 mm diameter accuracy, a ±0.002 mm tolerance and robust special-steel construction for reliable reference measurements; order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin M323.D38 — gauge pin with 13.38 mm diameter and 50 mm length (Metav IndustryLine) Test pin M323.D38 is a precision reference pin for end-measure checks and small-part inspection, designed as a workshop-grade gauge pin for routine use in quality control and assembly environments Workshop-grade test pin Diameter 13.38 mm, length 50 mm Tolerance ±0.002 mm Special steel construction Reliable reference for small-part inspection and repeatable results The gauge pin serves as a stable reference for end-measure tasks, offering precision where repeatability matters. With a nominal diameter of 13.38 mm and a certified machining tolerance of ±0.002 mm, the component provides a clear measurement baseline for go/no-go checks and comparative gauging. The tight tolerance reduces uncertainty in pass/fail decisions and shortens inspection loops, which supports smoother production flow and faster in-line quality verification. Built for the workshop: robust material and ergonomic dimensions Constructed from special steel, this workshop-grade pin resists wear from frequent handling and maintains dimensional integrity during regular use. At 50 mm overall length and approximately 0.1 kg mass, the pin is compact yet sufficiently rigid for handheld gauging or for use in simple fixtures. The design balances stiffness and manageability to limit deflection during contact measurements, so operators can obtain repeatable readings without complex fixturing. Seamless integration into inspection processes and micro-range classification Classified for the micro measurement range (10–100 mm), the pin fits applications that demand compact gauges for small parts, such as fine mechanical components and precision assemblies. The simple geometry of the gauge pin allows straightforward use with micrometres, bore gauges and comparator setups, enabling quick verification of end dimensions. The design supports efficient inspection routines in workshops where space and handling speed are critical, and it complements existing metrology toolsets from Metav IndustryLine. Contact Metav Werkzeuge in Emmerich to discuss the suitability of the Metav IndustryLine test pin M323.D38 for specific inspection tasks, or request further technical details by phone at +49 2822 7131930 or via email at info@metav-werkzeuge.com Technical Data Article number: M323.D38 GTIN: 4061905068959 SKU: M323.D38 Facts Diameter: 13.38 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Category: Gauge pin / test pin Intended use: end-measure inspection FAQ What measurement tolerance does the test pin offer? The Metav IndustryLine test pin M323.D38 is manufactured to a tolerance of ±0.002 mm, providing a stable reference for fine inspection tasks. Is this pin suitable for handheld checks and small fixtures? Yes; the 50 mm length and compact diameter make the pin appropriate for handheld gauging and for use in basic fixture setups during routine inspection. What material is the pin made from and why does that matter? The pin is made from special steel, chosen for wear resistance and dimensional stability to ensure consistent performance through repeated use. Which measurement range category does this pin belong to? The pin falls into the micro measurement range (10–100 mm), which is ideal for precision work on small components and fine mechanical parts. Can the pin be used as a reference for go/no-go checks? Yes; the simple cylindrical geometry and tight tolerance make the pin suitable as a reference for go/no-go comparisons and basic pass/fail checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.39mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precision fit, workshop robustness and traceable repeatability for reliable end‑measure checks and fixture verification; the combination of a 13.39 mm diameter, a 50 mm shaft and a tolerance of ±0.002 mm supports consistent Go/No‑Go and gauge‑maker workflows. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.D39 – single test pin, 13.39 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.D39 is a single, workshop‑grade test pin designed for end‑measure checks, gauge inserts and fixture set‑ups in industrial maintenance and metrology benches. Workshop-grade design Diameter 13.39 mm precision Tolerance ±0.002 mm Ensure measurement certainty with micrometric tolerance control The pin delivers a tolerance of ±0.002 mm, providing a measurable advantage where repeatability determines part acceptance. Manufactured for dimensional stability, the test pin reduces uncertainty in Go/No‑Go checks and in gauge‑maker templates. This level of accuracy supports reliable pass/fail decisions during incoming inspection and in‑process controls, so measurement processes run with fewer rechecks and less downtime. The focus on numerical precision underpins the rational case for replacing worn or improvised pins with a verified gauge component. Built for workshop handling and long service life Made from special steel and finished for consistent surface quality, the pin resists everyday wear encountered in workshop use. The 50 mm length gives secure engagement in standard fixtures while limiting overhang, and the compact mass aids quick handling during repetitive checks. Robust construction means reduced risk of deformation under normal use, which preserves repeatability between operators and measurement cycles. The material choice and workshop execution combine to lower lifecycle maintenance and deliver practical durability where throughput and reliability are priorities. Simple integration into gauges, fixtures and inspection routines As a single test pin, this item suits insertion into pinbanks, plug gauges and dedicated fixtures for bore and shaft verification. The nominal 13.39 mm diameter enables a precise reference for mating parts and assembly checks and is particularly helpful when establishing master sizes or performing comparative trials. The straightforward geometry allows rapid replacement and minimal fixture redesign; standard mounting practices and common gauge housings will accept this pin with no special adaptation, supporting efficiency in both small shops and larger production environments. Secure workshop‑grade precision with Metav IndustryLine test pins—contact Metav Werkzeuge for specification matching and delivery details at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.D39 SKU: M323.D39 GTIN: 4061905068966 Label: Prüfstift, einzeln, 13,39 mm Länge 50 mm Facts Diameter: 13.39 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Materials & features Material: Special steel Workshop execution Category: Gauge pins Single test pin FAQ What is the declared tolerance of this test pin? The test pin is supplied with a declared tolerance of ±0.002 mm, which defines its permitted dimensional deviation for precision inspection tasks. Which material is the pin made from and what does that mean for durability? The pin is made from special steel, chosen for wear resistance and dimensional stability under normal workshop conditions, ensuring consistent long‑term performance. Can this pin be used in standard plug gauges and fixtures? Yes, the geometry and lengths are compatible with common gauge housings and fixture insertions, allowing the pin to be integrated without special adapters. Is the 13.39 mm size suitable for establishing master sizes? A diameter of 13.39 mm provides a reliable reference for master checks and comparative measurements where a matched nominal is required. Is the product supplied individually or in sets? This entry describes a single test pin item supplied individually; for set requirements, consult product listings or contact Metav Werkzeuge for options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com