Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
13.8mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
The combination of high shop-floor robustness, tight tolerance of ±0.002 mm and the compact 13.8 mm diameter enables consistent end‑measurement and inspection routines in production. Order the test pin directly via Metav Werkzeuge or contact our consultants for application advice. Test pin, single — 13.8 mm Ø, 50 mm length (Metav IndustryLine) The Test pin, single, 13.8 mm, 50 mm is a workshop-grade inspection pin for precise end‑measurement, alignment checks and go/no‑go testing in manufacturing and quality control. Workshop-grade construction Diameter 13.8 mm, length 50 mm Tolerance ±0.002 mm Made from special steel Compact, repeatable inspection tool Precision that reduces rework and inspection time The compact probe is engineered to deliver consistent results on the shop floor: with a stated accuracy of ±0.002 mm, the pin minimises measurement scatter and helps to reduce reject rates. The tight tolerance is especially relevant for final gauging and pass/fail checks where even small deviations can drive costly rework. The simple cylindrical geometry supports quick seating in fixtures and repeatable contact points, enabling rapid cycle times during routine inspection. Built for everyday workshop use Designed as a workshop-grade item, the pin combines durability with easy handling. The special steel construction provides wear resistance under frequent contact, while the 50 mm length offers enough engagement for most end‑measurement tasks without unnecessary overhang. The modest mass ensures comfortable manual handling and stable placement in portable gauges or test fixtures. This balance of robustness and manageability makes it suitable for assembly lines, toolrooms and maintenance benches. Practical integration and handling benefits The straight cylindrical form makes the pin straightforward to integrate into existing fixtures and gauge assemblies. It functions well as a reference contact or locating element and is suitable for repetitive go/no‑go routines. Clear dimensional specification — 13.8 mm diameter and 50 mm overall length — aids in selecting the correct mating components and fixture bores. Labelling and the included SKU allow traceable inventory control when used in structured quality environments. Contact Metav Werkzeuge for specification support and to request the Metav IndustryLine workshop test pin (SKU M323.D80) for immediate inclusion in inspection workflows — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.D80 GTIN: 4061905066689 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 13,8 mm Länge 50 mm Facts Diameter: 13.8 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Workshop execution Material: Special steel Category: Messstifte eClass: 21170231 FAQ What are the exact dimensions of the pin? The test pin has a diameter of 13.8 mm and an overall length of 50 mm (SKU M323.D80). What tolerance does the pin meet? The inspection pin is specified with an accuracy of ±0.002 mm, suitable for tight end‑measurement tasks. What material is used for the pin? The pin is manufactured from special steel, chosen for wear resistance and durability in workshop conditions. Which applications suit this pin best? Typical uses include end‑measurement, locating and go/no‑go checks in production, fixture locating and alignment routines with repeatable contact points. Is the pin compatible with standard gauge fixtures? Yes, the straight cylindrical form and clear dimensional specification facilitate integration into common gauge blocks and bespoke fixtures; refer to SKU M323.D80 when matching components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.91mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a compact workshop probe that combines a precise Ø 13.91 mm diameter with a robust 50 mm length and an exacting tolerance of ±0.002 mm for repeatable bore checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.D91 — single test pin, Ø 13.91 mm, 50 mm length (Metav IndustryLine) A single gauge pin (M323.D91) designed for precise end‑measure checks and routine workshop inspection of bore sizes and fixture alignment. Workshop execution for daily use Diameter exactness Ø 13.91 mm High repeatability with ±0.002 mm tolerance Robust special steel construction Reliable tolerance for repeatable inspection results The core advantage lies in the ±0.002 mm dimensional variation, which provides measurable confidence during acceptance and in‑process checks. This level of tolerance supports consistent verification of hole diameters and gauge fittings, reducing ambiguity in pass/fail decisions. By using a dedicated gauge pin rather than improvised probes, measurement uncertainty is lowered and inspection throughput becomes more predictable, which benefits production monitoring and quality control processes alike. Engineered for workshop handling and longevity Built as a workshop execution item, the pin combines a special steel construction with a compact 50 mm shank to withstand repetitive handling and light impacts common on the shop floor. The profile and mass (approx. 0.1 kg) make the test pin easy to locate and insert while maintaining sufficient stiffness for accurate seating. The material choice balances wear resistance and machinability, ensuring that the pin preserves its critical diameter over extended use and minimises the need for premature replacement. Simple fit into existing inspection routines The single‑piece design is suitable for end‑measure and gauge reference tasks, offering straightforward application in go/no‑go checks, fixture set‑up and calibration templates. Identification via SKU M323.D91 and the GTIN supports traceable inventory and quick procurement. Using a dedicated inspection pin streamlines measurement sequences and shortens set‑up times, delivering a practical efficiency gain during routine quality checks without introducing complex workflows. For precise bore verification, choose the Metav IndustryLine gauge pin M323.D91 from Metav Werkzeuge — contact our Emmerich team for tailored technical guidance and procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.D91 GTIN: 4061905067570 Material: Special steel Weight: 0.1 kg Length: 50 mm Diameter: 13.91 mm Tolerance / Accuracy: ±0.002 mm Feature: Workshop execution Facts Single item delivery Compact workshop probe High repeatability Industry use: bore verification and fixture setting Special features Robust special‑steel construction Designed for routine shopfloor use Identifier: M323.D91 FAQ What applications suit this gauge pin? The gauge pin M323.D91 is intended for end‑measure checks, fixture set‑up and verification of bore diameters in workshop and production environments. What is the declared accuracy of the pin? The M323.D91 gauge pin is specified with a dimensional variation of ±0.002 mm, enabling precise go/no‑go and setting operations. Which material is used for the test pin? This test pin is manufactured from special steel, chosen for its wear resistance and suitability for repetitive workshop handling. Is the product supplied as a single item or in sets? The product is supplied as a single gauge pin under SKU M323.D91 for straightforward integration into inspection toolkits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.92mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
For precise workshop gauging, the combination of a 13.92 mm nominal diameter, ±0.002 mm manufacturing tolerance and robust special steel construction delivers consistently reproducible checks — order the part directly via Metav Werkzeuge or consult our specialists if further clarification is required. Gauge pin, single — 13.92 mm Ø, 50 mm length (Metav IndustryLine) Gauge pin, single — 13.92 mm Ø, 50 mm is a compact workshop pin for dimensional verification, assembly checks and reference measurements in precision fixtures. Workshop-grade construction Diameter 13.92 mm precision Tolerance ±0.002 mm accuracy Length 50 mm, single supply Accurate verification for tight tolerances The gauge pin is manufactured to a ±0.002 mm tolerance, making it a reliable reference for high-precision pass/fail checks and fit control. With a nominal diameter of 13.92 mm, the pin provides a defined datum for bores, jigs and alignment operations where repeatability is essential. The tight tolerance reduces uncertainty in go/no-go testing and shortens inspection cycles, supporting smoother production flow and fewer rework loops. As a precision reference, it complements both manual inspection routines and automated fixture validation. Durable, workshop-ready design Engineered as a workshop-grade item, the pin is made from special steel that resists wear under repeated insertion and withdrawal. The 50 mm length balances handling convenience with sufficient engagement in typical small-bore verifications, while the single-piece supply suits selective replacement or toolroom kits. The robust finish facilitates long service life and predictable contact behaviour, which helps maintain measurement consistency across batches and over time. This construction favours practical maintenance regimes and reliable everyday use in busy production environments. Simple integration into inspection routines Compact and straightforward to use, the pin fits common gauge blocks, fixture pockets and transfer gauges, speeding setup for comparative or reference measurements. Traceable identification via SKU and GTIN supports inventory control and part replacement. Stored alongside other precision tools, it provides an immediate go-to reference for bench checks, incoming inspection and final assembly verification. The M323.D92 designation allows quick retrieval from stock lists and helps align supplier communications with internal quality records. For dependable workshop verification choose the Metav IndustryLine gauge pin M323.D92; contact Metav Werkzeuge in Emmerich for suitability checks, availability and delivery details at +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: M323.D92 GTIN: 4061905067587 Category: Gauge pins Core data Diameter: 13.92 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Supplied individually FAQ What is the primary use of this gauge pin? The Metav IndustryLine gauge pin M323.D92 (gauge pin, 13.92 mm diameter, length 50 mm) is intended for dimensional verification, go/no-go checks and alignment tasks in fixture and assembly work. How tight is the manufacturing tolerance? Manufactured to a ±0.002 mm tolerance, the M323.D92 offers the precision required for high-repeatability checks and critical fit inspections. What material is the pin made from? The gauge pin is made from special steel, selected for wear resistance and stable contact properties under repeated use. Is the pin supplied individually or in sets? This item is supplied individually, suitable for selective replenishment of inspection kits and bespoke fixture requirements. Can the pin be used in automated fixtures? Yes, the compact geometry and precise diameter make the pin compatible with many fixture pockets and transfer gauges used in automated and semi-automated inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.93mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop‑ready test pin with a precise 13.93 mm diameter and an exacting ±0.002 mm tolerance to secure repeatable end‑measure checks; the 50 mm length and robust construction ensure stable reference points in fixtures and gauging operations. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin, single — 13.93 mm Ø, 50 mm length (Metav IndustryLine) Test pin, single, 13.93 mm, 50 mm length — a compact reference pin for metrology and workshop gauging, suitable for end‑measure checks and fixture alignment Workshop version, robust design Diameter 13.93 mm for precision fits Tolerance ±0.002 mm for high accuracy Supplied in transport box for protection Precision where alignment and repeatability count This gauge pin delivers a defined contact diameter of 13.93 mm with a very small tolerance of ±0.002 mm, making it suitable where dimensional certainty is required. As a hardened reference element, the pin functions as a reliable datum for plug‑type checks and end‑measure verifications, reducing measurement scatter and supporting consistent pass/fail decisions on the production line. The tight tolerance class corresponds to high‑precision workshop and inspection tasks, providing a measurable basis for quality control procedures. Built for everyday workshop handling and fixture use Manufactured from special steel, the pin is configured in a workshop execution that balances toughness and surface quality for repeated seating in jigs and gauges. With a shaft length of 50 mm, the component offers sufficient engagement depth for stable positioning without excess overhang, which aids handling and reduces the risk of deflection. Delivery in a dedicated transport box preserves the surface finish and geometry during storage and transit, ensuring the pin reaches the workplace ready for immediate use. Practical integration and measurement benefits As a compact reference element, the pin integrates easily into existing gauge assemblies, test fixtures and alignment tools to provide a fixed datum for comparative measurements. The dimensionally stable design enables faster set‑ups and reduces rework by offering a reproducible contact surface for go/no‑go checks or comparative inspection stages. Where throughput and reliable decision criteria are priorities, this precision pin supports streamlined control processes and traceable measurement routines. For Metav IndustryLine workshop gauge pins and further guidance on integrating precision reference elements into gauges and fixtures, contact Metav Werkzeuge for specialist advice and prompt supply from Emmerich Technical data SKU: M323.D93 GTIN: 4061905067594 Description: Test pin, single, 13.93 mm, length 50 mm Material: Special steel Weight: 0.1 kg Accuracy: ±0.002 mm Facts Diameter: 13.93 mm Length: 50 mm Tolerance: ±0.002 mm Mass: 0.1 kg Special features Workshop execution Delivered in transport box for protection during transport Application: end‑measure checks, gauging, fixture alignment Supplied as single item FAQ What tolerance does the test pin offer? The test pin is manufactured to a tolerance of ±0.002 mm, providing high repeatability for inspection and gauging tasks with the Metav IndustryLine workshop design. Which material is the pin made from? This Metav IndustryLine test pin is produced from special steel, chosen for dimensional stability and wear resistance in repeated fixture contact. Is the pin delivered ready for use and protected? Yes, the pin is supplied as a single item and is delivered in a transport box to protect the finished surface and ensure ready‑to‑use condition on arrival. For which applications is the 13.93 mm pin suitable? The 13.93 mm diameter pin is intended for end‑measure checks, go/no‑go gauging and as a reference element in fixtures where a defined contact diameter is required. How does the pin help with setup and alignment in production? By providing a stable, precisely sized datum, the pin simplifies fixture alignment and reduces set‑up time, enabling reproducible positioning and faster quality decisions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.94mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Reliable end‑size verification is provided by this workshop‑grade gauge pin: Ø 13.94 mm nominal diameter, 50 mm overall length and a manufacturing tolerance of ±0.002 mm for repeatable checks. Robust special steel construction supports frequent use in setup and inspection tasks. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Gauge Pin (Ø 13.94 mm, 50 mm length) The Metav IndustryLine Gauge Pin (Ø 13.94 mm, 50 mm length) is a single workshop‑grade measuring pin designed for precise end‑size checks and straightforward setup tasks Workshop-grade design for toolroom use Diameter 13.94 mm with ±0.002 mm tolerance 50 mm overall length suitable for end‑size checks Manufactured from special steel for durability Precision where it matters The Metav IndustryLine gauge pin delivers a defined measurement datum with a specified tolerance of ±0.002 mm, making it suitable for high‑accuracy workshop checks and final inspection steps. The nominal Ø 13.94 mm dimension and ground working surface ensure contact conditions that reduce measurement scatter; in practise this means more consistent pass/fail decisions during production control. Use in end‑size verification and jig setting benefits directly from the narrow tolerance band because fewer rechecks are required, improving throughput without sacrificing reliability. Built for repeated workshop use Specified as a workshop‑grade item, the pin is made from special steel formulated for wear resistance and dimensional stability under normal handling. The 50 mm overall length provides a practical working length for probing bores and aligning fixtures while remaining compact for bench work. Classified in the micro range of measuring pins, this size combines low deflection with easy one‑hand handling, making it well suited to small parts assembly, toolroom tasks and precision maintenance operations. Practical integration into inspection routines As a single measuring pin for end‑size controls, the unit fits into existing gauge blocks, alignment fixtures and bench jigs without special adapters. The defined geometry and tight tolerance deliver repeatable results, which simplifies statistical process control (SPC) sampling and reduces the need for compensating adjustments in downstream operations. For users requiring further adaptation to bespoke fixtures, Metav specialists can advise on suitable complementary items and measurement strategies to maintain consistent quality flow. For assured end‑size verification and workshop reliability, contact Metav Werkzeuge to request the Metav IndustryLine gauge pin and expert guidance; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M323.D94 GTIN: 4061905067600 ECLASS: 21170231 Category: Messstifte Facts Nominal diameter: 13.94 mm Overall length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: special steel Single test pin delivery Intended for end‑size checks FAQ What is the stated dimensional tolerance for this measuring pin? The product is specified with a dimensional tolerance of ±0.002 mm for the nominal Ø 13.94 mm, enabling fine end‑size verification in workshop inspections. Which material is used for the pin and why does it matter? The pin is manufactured from special steel; this material choice improves wear resistance and dimensional stability for repeated contact measurements in a workshop environment. What length and diameter does the pin have? The gauge pin measures 50 mm in overall length with a nominal diameter of 13.94 mm, matching common micro‑range requirements for small parts and toolroom checks. Is a calibration certificate included with delivery? The product data does not indicate delivery with a calibration certificate; calibration details would be specified separately if included. Which applications suit this gauge pin best? This measuring pin is intended for end‑size checks, fixture and jig set‑up, and precision bench operations where a compact, low‑deflection gauge is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.95mm Gauge Pin 50mm Length Workshop Version, Special Steel ±0.002 - Metav IndustryLine
Take advantage of precise end‑dimension control with a 13.95 mm diameter pin and a ±0.002 mm positional tolerance, combined with a robust special steel construction and transport-ready casing for reliable workshop use. Order the test pin directly via Metav Werkzeuge or consult the specialists if application advice is required. Test pin, single, 13.95 mm, length 50 mm — workshop test pin with ±0.002 mm accuracy (Metav IndustryLine) Test pin, single, 13.95 mm, length 50 mm is a workshop-grade gauge pin intended for accurate end‑dimension checks, fixture alignment and reference probing in production and inspection settings. Workshop-grade construction Diameter 13.95 mm precision fit Tolerance ±0.002 mm accuracy Supplied in transport case Confident dimensional verification for production processes The inspection pin is designed for consistent, repeatable checks where accuracy reduces rework and downtime. With a declared tolerance of ±0.002 mm, the pin supports fine adjustment tasks and final inspections that demand narrow deviation limits. Using a defined gauge pin simplifies pass/fail assessments and speeds up quality decisions, so measurement steps become a dependable part of the production sequence rather than a bottleneck. Durable build for everyday workshop demands Constructed from special steel in a workshop execution, the pin withstands routine handling and repeated seating in fixtures. The material choice provides wear resistance and a stable surface finish that preserves the 13.95 mm datum over many cycles, extending the service life and lowering replacement frequency. This robustness translates to fewer interruptions in maintenance windows and a steadier overall throughput on the shop floor. Faster setup and secure fixturing with exact fit A precisely ground diameter ensures a snug fit in locating holes and gauges, which improves assembly alignment and reduces play during machining or measurement. The standardised length of 50 mm offers sufficient engagement for most fixture designs without excess overhang, enabling quicker setup and reliable datum transfer. By integrating a dedicated gauge pin, alignment procedures become shorter and less error‑prone, increasing operational efficiency. Transport-ready delivery and traceable identification Delivered in a protective transport case, the pin arrives ready for safe handling and storage; the casing minimises surface contact and transit damage. The compact format and clear SKU/GNT identifiers facilitate inventory control and drawer storage in toolrooms. Lightweight and straightforward to inspect, the component supports a pragmatic approach to workshop logistics, from bench use to bench storage. For workshop-ready precision choose the Metav IndustryLine test pin and contact Metav Werkzeuge in Emmerich for tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.D95 GTIN: 4061905067617 Weight: 0.1 kg Material: Special steel Length: 50 mm Diameter: 13.95 mm Positional tolerance: ±0.002 mm Facts Single item gauge pin Workshop execution Transport case included Special features Designed for end‑dimension checks Robust surface for repeated seating Compact geometry for fixture integration FAQ What measurement accuracy can be expected from this gauge pin? The test pin offers a positional tolerance of ±0.002 mm, making it suitable for fine workshop inspections and precision alignment tasks. Is the pin supplied ready for use or does it require additional preparation? The Metav IndustryLine test pin is supplied in a protective transport case and is ready for immediate use in fixturing and inspection routines. Which material is the pin made from and what does that mean for longevity? Manufactured from special steel, the pin provides good wear resistance under normal workshop handling, ensuring stable datum surfaces over repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.96mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial accuracy, compact handling and robust workshop design to keep inspection throughput steady. The high tolerance of ±0.002 mm on a 13.96 mm diameter and the 50 mm overall length ensure repeatable end‑measurement results; order directly via Metav Werkzeuge or consult the technical team for specification matching. Gauge pin (single) 13.96 mm diameter · 50 mm length — Metav IndustryLine A Gauge pin (single, 13.96 mm diameter, 50 mm length) tailored for precise end‑measurement and fit‑checking in inspection and assembly applications. Workshop version, robust finish Diameter 13.96 mm precision fit Length 50 mm for deep seats Tolerance ±0.002 mm for tight control Precision that reduces rework and speeds inspection The gauge pin provides a clearly defined reference for end measurements and go/no‑go checks, delivering a repeatable datum with a stated tolerance of ±0.002 mm. Such tight control is particularly useful where component fit and clearance are critical: the fixed 13.96 mm diameter gives a deterministic contact surface, avoiding ambiguity in pass/fail decisions. Presented as a compact verification tool, it supports higher throughput by shortening inspection cycles and reducing the likelihood of downstream rework. Robust construction for everyday workshop demands Manufactured in special steel, the pin combines wear resistance with dimensional stability over repeated cycles. The 50 mm overall length affords access to deeper seats while remaining easy to handle; at approximately 0.1 kg the weight supports stable placement without being cumbersome. The workshop version finish balances durability and cost‑efficiency, making the component suitable for production benches, fixture checks and assembly lines where tools are used frequently and need to withstand practical handling. Simple integration into measurement routines and tooling As a standardised inspection artefact, the pin slots into established procedures for end‑dimension verification, reference checks and fixture validation. The uncomplicated geometry enables straightforward comparison to nominal dimensions and easy replacement in jigs or mandrels. Using a defined gauge such as this reduces interpretation error in quality control documentation and improves statistical process control inputs, supporting leaner production and more reliable acceptance criteria. Contact Metav Werkzeuge for technical advice and to secure the M323.D96 gauge pin for precision inspection tasks Technical Data Article number: M323.D96 GTIN: 4061905067624 Manufacturer: Metav IndustryLine Facts Diameter: 13.96 mm Length: 50 mm Tolerance / Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pins Intended use: End measurement / fit checking FAQ What measurement tasks is this gauge pin suitable for? The gauge pin is intended for end‑measurement and fit checks; it offers a defined 13.96 mm reference for bore and seating verification. How precise is the M323.D96 gauge pin? The M323.D96 from Metav IndustryLine carries a stated tolerance of ±0.002 mm, suitable for tight inspection limits. Is the gauge pin robust enough for daily workshop use? Yes, the workshop execution and special steel construction make the pin resilient to frequent handling and routine inspection use. Can this pin be used with inspection fixtures and jigs? The pin’s simple cylindrical geometry and 50 mm length allow straightforward integration into existing fixtures and mandrels. How is the gauge identified for inventory and traceability? Identification is possible via the article number M323.D96 and GTIN 4061905067624 for inventory and ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.97mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of a compact, workshop-ready gage that combines a Ø 13.97 mm nominal diameter with a repeatable ±0.002 mm tolerance and a 50 mm length for fast end‑dimension checks; its special steel construction ensures durability in daily use. Order the inspection pin directly via Metav Werkzeuge or ask our consultants if needed. Inspection pin M323.D97 – Ø 13.97 mm, 50 mm length (Metav IndustryLine) The Inspection pin M323.D97 is a precision gage pin designed for end‑dimension verification and quick in‑process checks in workshop environments. *Workshop version, robust design *Diameter 13.97 mm, high-precision fit *Tolerance ±0.002 mm for reliable checks Consistent end‑dimension checks for assembly and inspection This gage pin delivers a compact solution for routine dimensional control where tight fits and repeatable results matter. The combination of Ø 13.97 mm and a 50 mm overall length gives a stable bearing surface that reduces wobble during insertion, while the declared ±0.002 mm variation supports trustworthy go/no‑go assessments in production. The use of special steel balances surface hardness with resistance to wear, preserving the pin’s geometry through repeated handling and contributing to lower rejection rates on assembly lines. Built for workshop handling and everyday robustness The workshop version construction provides resilience against knocks and frequent manipulation typical in trade and maintenance contexts. At approximately 0.1 kg, the pin is heavy enough to feel substantial in hand yet compact for rapid gauging tasks; that mass aids stable seating in bores and sockets without being cumbersome. The refined shaft finish and precision fit make it suitable for use in jigs, fixture checks and as a reference in quick go/no‑go procedures where simplicity and repeatability save time on the shop floor. Integrates smoothly into quality routines and tooling sets Designed to complement existing gage sets and bench tooling, this inspection pin supports efficient process control and reduces setup iteration. The straightforward geometry eases use in line inspections, bore verification and end‑dimension confirmation of machined parts. By standardising on a reliable, workshop‑orientated pin, teams can improve throughput and consistency without complex calibration steps; the short, rigid profile is especially beneficial for final dimensional checks and fastening alignment tasks. Contact Metav Werkzeuge for tailored advice on incorporating this inspection pin into workshop inspection processes; Metav Werkzeuge in Emmerich can supply the M323.D97 and advise on compatible tooling and delivery options – info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M323.D97 GTIN: 4061905067631 Description: Inspection pin, single, Ø 13.97 mm, length 50 mm Facts Diameter: 13.97 mm Length: 50 mm Weight: 0.1 kg Tolerance / variation: ±0.002 mm Special features Material: special steel Workshop version Intended for end‑dimension checks and bore verification FAQ What applications suit this inspection pin best? The inspection pin M323.D97 is intended for end‑dimension checks, bore verification and simple go/no‑go assessments in workshop and production environments. How precise is the pin for repeatable measurements? Manufactured for a variation of ±0.002 mm, the pin delivers repeatable seating and reliable pass/fail decisions for typical assembly and inspection tasks. Which material is used and how does it affect durability? Made from special steel, the pin offers a durable surface and wear resistance suitable for frequent workshop use without rapid deterioration of the reference diameter. Can this pin be used in jigs and fixture alignment? Yes; the compact 50 mm length and rigid profile are designed to assist with alignment, seating checks and fixture verification during setup and production runs. Is the pin suitable for precision laboratory metrology? While optimised as a workshop gage, the pin’s tight tolerance makes it useful for routine quality control; for lab‑grade traceability and submicron requirements, a dedicated laboratory standard should be considered Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.98mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from repeatable end‑dimension checks with a 13.98 mm diameter and a tight ±0.002 mm tolerance; the workshop‑grade gauge pin combines robust special steel construction and a compact 50 mm length for reliable fixture verification. Order the gauge pin directly via Metav Werkzeuge or consult our technical advisors if further clarification is required. Gauge pin, single — 13.98 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin, single designed for precise end‑dimension inspection and fixture verification in workshop metrology. Diameter 13.98 mm precision fit 50 mm length workshop execution Tolerance ±0.002 mm high repeatability Special steel construction for durability Ensure repeatable end‑dimension checks with tight tolerances The compact measuring probe delivers consistent results where small deviations matter. With a nominal diameter of 13.98 mm and a verified tolerance of ±0.002 mm, this compact test pin is suited to end‑dimension control and plug‑gauge applications that demand traceable repeatability. The fine tolerance reduces rework and accelerates inspection cycles, enabling quicker in‑process decisions and fewer downstream faults. Built for daily workshop use — robust and easy to handle Crafted in special steel, the pin resists wear and preserves measuring integrity across repetitive operations. The 50 mm length offers a practical balance between reach and rigidity for bench checks and fixture validation; the compact form factor simplifies handling during series inspection and minimises the risk of flex‑related error. This workshop execution is optimised for frequent use, helping to maintain productivity in busy production environments. Identification, traceability and system compatibility Marked and traceable as M323.D98 and supplied with GTIN 4061905068577, the pin integrates easily into parts lists and calibration schedules. The simple geometry makes it compatible with standard plug‑gauge holders and fixture bores, supporting rapid substitution and inventory control. Paired with Metav’s service and catalogue range, this component supports a streamlined procurement process and reliable replenishment for scheduled inspections. Contact Metav Werkzeuge to request the M323.D98 gauge pin for dependable fixture checks or to obtain tailored technical advice from our metrology specialists Technical data Article number: M323.D98 GTIN: 4061905068577 Eclass: 21170231 Facts Diameter: 13.98 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Material: special steel Workshop execution Label: Prüfstift, einzeln, 13,98 mm Länge 50 mm Story trigger: endmasse FAQ What applications is this gauge pin intended for? This gauge pin is intended for end‑dimension checks, fixture verification and plug‑gauge tasks in workshop metrology; the compact design suits routine inspection of bores and gauges. Does the pin meet high repeatability requirements? Yes — the test pin features a tolerance of ±0.002 mm, providing high repeatability for comparative and acceptance measurements. Which material is used for the pin and why does it matter? The pin is made from special steel, chosen for wear resistance and dimensional stability under frequent use, which helps maintain measurement integrity. How is the item identified for ordering and inventory? The component is listed as M323.D98 with GTIN 4061905068577, enabling straightforward ordering and traceability within procurement systems. Is the 50 mm length suitable for fixture and bore checking? The 50 mm length offers a practical compromise between reach and rigidity, making it suitable for most workshop fixture and small‑bore checks where a compact, stable probe is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.99mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the high repeatability of ±0.002 mm tolerance, the precise 13.99 mm diameter and robust special steel construction for reliable in‑process checks. Order the gauge pin directly via Metav Werkzeuge or ask the consultants for application advice. Gauge pin M323.D99 — single precision test pin, 13.99 mm diameter (Metav IndustryLine) The gauge pin M323.D99 is a single precision test pin designed for quick verification of bore fits and go/no‑go checks in workshop inspection tasks. Workshop-configured for daily industrial use Diameter 13.99 mm for precision fit Tolerance ±0.002 mm for consistent results Precision where it matters The gauge pin delivers a nominal diameter of 13.99 mm with a verified tolerance of ±0.002 mm, making it suitable for repeatable go/no‑go checks and tight‑tolerance verifications. Constructed from special steel, the pin maintains dimensional stability under typical workshop handling and enables consistent contact with mating bores. The narrow tolerance and hardened material minimise elastic deformation during insertion, which supports trustworthy pass/fail assessments and reduces rework. Built for workshop inspection and fixtures Engineered as a workshop version, this single test pin combines sturdy handling characteristics with a compact 50 mm length that is easy to manoeuvre in jigs and fixture setups. The straightforward geometry simplifies visual alignment and tactile feel during manual inspection cycles. The robust finish of the special steel surface resists everyday wear, preserving the measuring diameter and ensuring consistent measurement outcomes in serial quality checks. Practical use and traceable identification For traceability and ordering, the test pin is listed under SKU M323.D99 and GTIN 4061905068584; the compact form factor makes it a practical spare for inspection kits and toolrooms. Typical applications include assembly line spot checks, fixture verification and quick dimensional validation of bores and holes. Rely on its repeatability to reduce inspection time and support efficient process control while benefiting from Metav IndustryLine’s industrial supply chain and product consistency. Select the Metav IndustryLine workshop‑grade gauge pin for reliable bore verification and contact Metav Werkzeuge for tailored advice and fast supply from Emmerich Technical data Article number: M323.D99 GTIN: 4061905068584 Weight kg: 0.1 Material: Special steel SKU: M323.D99 Core dimensions Diameter mm: 13.99 Length mm: 50 Tolerance: ±0.002 mm Special features Workshop version Single gauge pin Category: Messstifte Precision nominal diameter FAQ What are the exact dimensions of the gauge pin? The gauge pin M323.D99 has a nominal diameter of 13.99 mm and a length of 50 mm, specified for compact inspection tasks. Which tolerance can be expected from this test pin? The test pin is manufactured to a tolerance of ±0.002 mm, offering high repeatability for go/no‑go and fit checks. What material is used for the pin? The pin is made from special steel, providing dimensional stability and resistance to everyday workshop wear for consistent measurements. For which applications is this gauge pin suitable? The gauge pin from Metav IndustryLine is intended for bore verification, fixture checks and quick quality control operations in a production or workshop environment. How is the product identified for ordering or stock? The product is listed as SKU M323.D99 and GTIN 4061905068584, which can be used for procurement and stock tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.9mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of high repeatability, tight tolerance and robust workshop construction to keep inspection cycles reliable and efficient; order the single gauge pin Ø13.9 mm, length 50 mm directly via Metav Werkzeuge or consult our technical team for application advice. Gauge pin Ø13.9 mm — single workshop plug gauge, Metav IndustryLine The gauge pin Ø13.9 mm, length 50 mm is a single, workshop-grade plug gauge designed for quick end‑measurement and fit verification in production and inspection environments. Workshop-grade construction Diameter 13.9 mm, length 50 mm Tolerance ±0.002 mm Made from special steel Repeatable accuracy to protect production tolerances This workshop plug provides a tolerance of ±0.002 mm, delivering repeatable checks that reduce uncertainty in go/no‑go decisions and help avoid costly rework. The tight tolerance translates into a reliable reference for checking bores and fits during assembly and final inspection, improving process stability and increasing throughput. The accuracy is presented in a form easily integrated into standard quality control procedures, so inspection time per part is minimised while traceability is maintained. Robust design for everyday handling and longevity Manufactured in special steel and finished for workshop use, the plug is engineered to tolerate frequent handling and routine contact with machined surfaces. The compact length of 50 mm and low weight (0.1 kg) make it simple to position in jigs, fixtures or handheld checks without fatigue. The solid construction reduces the risk of deformation and preserves the gauge’s geometric integrity, ensuring consistent measurement performance over many inspection cycles. Easy identification and practical integration into workflows Supplied as a single item with clear identifiers, the plug can be recorded in inspection logs and stored alongside other calibration standards for efficient part selection. The SKU M323.D90 and GTIN enable straightforward stock management and ordering. Because the item is a workshop version, it suits routine go/no‑go checks, in‑process verification and final acceptance testing where a compact, precise reference is required. The result is a small investment that contributes to fewer production interruptions and a steadier quality record. For workshop-calibre verification tasks choose Metav IndustryLine plug gauges such as the M323.D90 — contact Metav Werkzeuge GmbH for ordering and technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.D90 GTIN: 4061905067563 Manufacturer: Metav IndustryLine Material: Special steel Diameter: 13.9 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Facts Length: 50 mm Diameter: 13.9 mm Weight: 0.1 kg Tolerance: ±0.002 mm eCl@ss: 21170231 Special features Workshop version Single-piece supply SKU: M323.D90 GTIN included High repeatability for routine inspection FAQ What applications suit this gauge pin best? The gauge pin Ø13.9 mm, length 50 mm from Metav IndustryLine is intended for bore and fit verification in workshop and production environments, making it suitable for go/no‑go checks, assembly control and routine inspection tasks. What is the declared tolerance and how does it affect use? The plug offers a declared tolerance of ±0.002 mm; this level of precision supports reliable acceptance checks and reduces the risk of false rejects in standard quality workflows. Is the item easy to order and identify in stock systems? Yes. The product is listed under SKU M323.D90 and GTIN 4061905067563, which facilitates inventory management and reordering for workshop tool cabinets. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14 mm Gauge Pin 50 mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the pin's combination of high geometric accuracy, compact 50 mm length and robust special steel construction for repeatable end‑size checks on the shop floor; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.E00 — 14.00 mm diameter, 50 mm length (Workshop version) The gauge pin 14.00 mm, 50 mm length is a single test pin designed for precise end‑size inspection and dimensional reference work in workshop and production environments. 14.00 mm ground diameter 50 mm length for recessed seats Tolerance ±0.002 mm for high repeatability Workshop version, durable construction Accuracy and repeatability for reliable end‑size inspection The M323.E00 gauge pin delivers a nominal diameter of 14.00 mm with a verified tolerance of ±0.002 mm, providing a dependable reference for acceptance checks and setting operations. Such close tolerance reduces measurement scatter when used as a master artefact or checking pin, supporting consistent pass/fail decisions on production lines. The compact geometry concentrates stiffness where it matters, so dimensional checks remain reproducible even with manual handling. Robust construction tailored to workshop use Manufactured from special steel, this single‑piece test pin combines dimensional stability with practical robustness required in everyday shop environments. The 50 mm length is chosen to access moderately deep bores and seats without compromising rigidity; the workshop version designation indicates a focus on durability and straightforward handling rather than delicate laboratory finishes. The overall design simplifies integration into bench checks, fixture validation and fixture set‑up tasks. Practical procurement and integration into quality workflows Supplied as an individual precision pin, the product suits use as a reference in master sets or for spot checks on components after machining. The compact form factor and clear nominal data make it straightforward to record in quality documentation and to order repetitively through established supply chains. Metav's European stock and quality filtering ensure fast availability and traceable fulfilment, supporting uninterrupted inspection routines and reliable inventory planning. Contact Metav Werkzeuge in Emmerich for application guidance or to arrange supply from our European quality stock Technical data SKU: M323.E00 GTIN: 4061905068591 Article: Gauge pin, single, 14.00 mm, length 50 mm Brand: Metav IndustryLine Facts Diameter: 14.00 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Material: special steel Intended for end‑size checking Single test pin design FAQ What is the nominal diameter and tolerance of this pin? The gauge pin has a nominal diameter of 14.00 mm with a manufacturing tolerance of ±0.002 mm; this is specified for the M323.E00 test pin. For which inspection tasks is this pin suited? This single test pin is intended for end‑size inspection, seating checks and dimensional referencing of bores and recesses in workshop and production contexts. What material and length are provided? The M323.E00 is made from special steel and measures 50 mm in length, combining adequate reach with the stiffness required for repeatable checks. Can the pin be used as a master or setting artefact? Yes — the pin's tight tolerance and stable geometry make it suitable as a reference in master sets, bench checks or as a setting element for fixtures. How is the product supplied? The item is supplied as a single gauge pin (single‑piece configuration) under SKU M323.E00 for straightforward identification in procurement and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14,01- 15,00mm Messstift-Sätze, Werkstatt-Ausführung, ± 0,004 mm
- aus Spezial-Stahl Werkstatt-Ausführung, Länge 50 mm Genauigkeit < ± 0,004 mm im Behältnis/KastenTechnische Daten- Messbereich: 14,01- 15,00mm- Stufung: 0,01mm- Anzahl/Satz: 100
14-15mm Gauge Pin Set 101pcs 0.01mm Increments With Probe Holder, Special Steel In Case - Metav IndustryLine
Take advantage of the combination of micro-range precision, fine 0.01 mm graduations and robust special-steel construction for reliable bore inspection and gauge work; order the set directly via Metav Werkzeuge or consult our specialists for application advice. Pin gauge set, 101-piece — 14–15 mm, 0.01 mm increments (Metav IndustryLine) Pin gauge set for fast, repeatable inspection of bores and gauges in workshop quality control and production testing 101 pins covering 14–15 mm in 0.01 mm steps High repeatability with ±0.004 mm accuracy Pins made from special steel for wear resistance Integrated pin holder for organised handling Micro-range precision for routine inspection The Pin gauge set, 101-piece delivers a compact solution for short-range bore measurement and plug gauge tasks within the 14–15 mm span. With 0.01 mm increments across 101 pins, the set provides dense coverage for fine tolerance work; this density reduces interpolation and speeds up go/no-go checks. The specified accuracy ±0.004 mm underlines the set’s suitability for routine inspection tasks and dimensional verification in machine shops and tool rooms, ensuring reproducible results during repeated measurements. Durable construction for long-term shop use Pins are manufactured from special steel, chosen for dimensional stability and resistance to wear under frequent contact inspections. Each pin is supplied with a working length of 50 mm, offering sufficient engagement depth for typical bore and gauge checks while keeping handling straightforward. The set includes a pin holder for organised storage and quick selection during inspection sequences, reducing handling time and the risk of misplacement in a busy workshop environment. Practical efficiency and integration into QC workflows Designed as a micro-range gauge set, this collection supports rapid size selection and serial checking, which improves throughput in small-batch production and maintenance routines. The compact nature of the range minimises setup time compared with adjustable gauges and simplifies documentation of measured sizes. Where traceability or procurement consistency matters, the set’s configuration and repeatability integrate well into existing workshop quality-control procedures and inspection reports. Choose the Metav IndustryLine pin gauge set for dependable micro-range inspection and contact Metav Werkzeuge in Emmerich for specification matching or supply coordination. Technical data Article number: M318.584 GTIN: 4054469156217 EClass: 21170231 Facts Measurement range: 14.0–15.0 mm Minimum size: 14 mm Maximum size: 15 mm Step size: 0.01 mm Accuracy: 0.004 mm Pins per set: 101 Pin length: 50 mm Weight: 9.8 kg Special features Material: Special steel With pin holder Set configuration suitable for micro-range inspection Tariff number: 90173000 FAQ What range of sizes does the set cover? The set covers the 14–15 mm range in 0.01 mm increments, providing dense size steps for precise bore checks. What is the material of the pins and why does it matter? Pins are made from special steel, which offers dimensional stability and wear resistance for repeated inspection tasks. How many pins are included and what is their length? The package contains 101 pins, each with a working length of 50 mm, suitable for standard bore engagement depths. What level of accuracy can be expected from the set? The set is specified with an accuracy of ±0.004 mm, making it appropriate for routine precision checks in workshop quality control. Is the set suitable for go/no-go inspection procedures? Yes — the dense 0.01 mm spacing and repeatable dimensions make the collection practical for systematic go/no-go checks and stepwise verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.01mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, compact handling and robust workshop design to streamline end-measure checks and reduce rework. Order the gauge pin directly via Metav Werkzeuge or ask the Metav consultants for batch availability and application advice. Gauge pin M323.E01 (14.01 mm Ø, 50 mm length) — Metav IndustryLine A gauge pin M323.E01 for precise end-measure checks and setting work in workshop and inspection tasks, designed as a single, robust measuring pin for routine dimensional control. Workshop version for robust daily use Diameter 14.01 mm, precision ±0.002 mm Length 50 mm for stable handling Supplied in transport case Dependable accuracy for repeatable end-measure checks The single gauge pin is engineered for precision and repeatability in routine inspection tasks. With a nominal diameter of 14.01 mm and a stated tolerance of ±0.002 mm, this measuring pin offers a consistent reference for go/no-go checks and fine setting operations. The tight tolerance supports rapid decisions at the inspection bench and reduces downstream rework by ensuring that components meet dimensional requirements before assembly. The combination of nominal size and accuracy positions this pin as an effective tool for end-measure verification where narrow clearance and interference fits are involved. Built for everyday workshop handling and long service life Constructed from special steel, the pin combines surface hardness with corrosion resistance required in production environments. The 50 mm overall length gives comfortable handling and stable seating in fixtures, while the workshop specification emphasises durability under frequent use. Supplied in a protective transport case, the pin is protected during storage and transit, which preserves its measuring quality and minimises the need for premature replacement. The robust design therefore supports lower total cost of ownership through extended service intervals and fewer measurement-related interruptions. Practical integration into quality routines and fixtures As a compact measuring element, the gauge pin suits small-scale metrology and fine-mechanical tasks typical of the micro measurement segment (measurement range up to 10–100 mm). It functions well as a setting datum, reference plug for fixture alignment, or a manual go/no-go gauge when paired with visual or tactile inspection methods. The simple geometry makes the pin straightforward to use in jigs, bore checks and end-of-line inspections, offering a fast, rational solution to control tasks that demand both repeatability and ease of handling. Documentation such as GTIN and the clear SKU facilitates traceability within inventory and quality systems. Contact Metav Werkzeuge for batch availability, application guidance or technical matching of precision gauge pins — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M323.E01 Label: Prüfstift, einzeln, 14,01 mm Länge 50 mm GTIN: 4061905068607 Weight: 0.1 kg Facts Diameter: 14.01 mm Length: 50 mm Tolerance: ±0.002 mm Material: Special steel Special features Workshop version Supplied in transport case Category: Gauge pin / measuring pin Story trigger: end-measure checks FAQ What is the declared tolerance of the gauge pin and how does it affect inspection? The tolerance of ±0.002 mm ensures tight control when using the gauge pin M323.E01 as a reference; this level of precision reduces ambiguity in go/no-go checks and helps prevent assembly errors. Is the pin suitable for frequent workshop use? Yes, the workshop specification and special steel construction make the gauge pin robust enough for routine use and repeated seating in fixtures. Can this pin be used as a datum for fixture alignment? The 50 mm length and cylindrical geometry make the measuring pin suitable as a datum or setting reference in jigs and alignment fixtures for small components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.03mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop-grade measuring solution that combines 14.03 mm nominal diameter, ±0.002 mm accuracy and robust special-steel construction to secure reproducible end‑dimension checks; order directly via Metav Werkzeuge or consult our advisors for application guidance. Gauge pin M323.E03 – 14.03 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.E03 is a workshop‑grade measuring pin for end‑dimension checks and fixture set‑up in production and inspection tasks. Workshop‑grade design Diameter 14.03 mm precision Length 50 mm hardened shaft Accuracy ±0.002 mm Precision where reproducibility matters A compact measuring element that delivers repeatable results: the pin’s 14.03 mm nominal diameter and ±0.002 mm stated accuracy provide a measurable improvement in process control compared with routine shop gauges. Manufactured from special steel, the shaft resists bending and wear, which reduces measurement drift during repeated insertion checks. For end‑dimension verification and plug‑gauge reference points, this compact format supports fast, reliable decisions and fewer downstream reworks. Built for workshop handling and durability Designed as a workshop version, this measuring pin balances toughness with manageable weight (approx. 0.1 kg), so handling and fixture changes remain straightforward. The 50 mm length offers sufficient engagement for most assembly and inspection tasks while keeping the element rigid under normal use. Delivery boxed for transport protects the instrument between shifts and during storage, ensuring the hardened surface and calibration state remain intact until the next use. Practical integration and time savings on the shop floor Integration into routine inspection sequences is simple: the pin’s standard dimensions make it immediately compatible with gauges, jigs and fixture bores used in machining and assembly. Using a defined, traceable gauge reduces subjective judgement in go/no‑go checks and shortens inspection cycles — a clear operational benefit that supports higher throughput and consistent quality. Where nominal end dimensions are critical, the design helps to avoid costly rework and supports efficient process documentation. For consistent end‑dimension control with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for technical advice and availability: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.E03 GTIN: 4061905068621 SKU: M323.E03 Label: Prüfstift, einzeln, 14,03 mm Länge 50 mm Facts Diameter: 14.03 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Boxed for transport (plastic or wooden box) Application: End‑dimension checks FAQ What is the intended use for this gauge pin? The gauge pin M323.E03 (Metav IndustryLine measuring pin) is intended for repeatable end‑dimension checks, fixture set‑up and plug‑type verification in workshop and production environments. How precise is the measuring element? The measuring pin is supplied with an accuracy of ±0.002 mm, making it suitable for fine shop measurements where tight reproducibility is required. What material is the pin made from? The shaft is manufactured from special steel, chosen for wear resistance and dimensional stability under routine workshop conditions. Is the pin delivered ready for use and protected for transport? Yes; the product is delivered boxed for transport to protect the hardened surface and preserve measurement integrity during storage and handling. Can this pin be used with standard fixtures and gauges? The pin’s standardised diameter and length make it compatible with common fixtures, gauge blocks and jigs used for end‑dimension verification in machining and assembly Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.04mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Precision measurement with a workshop-grade gauge pin in special steel, offering a diameter of 14.04 mm and a repeatable tolerance of ±0.002 mm; supplied individually in a protective transport case. Benefit from reliable repeatability and robust handling for in-process checks — order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.E04 — single gauge pin, Ø 14.04 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.E04 for quick dimensional verification and end‑measure checks in workshop and inspection settings Workshop-grade execution Diameter 14.04 mm, length 50 mm Accuracy ±0.002 mm Consistent accuracy for rapid inspection results The M323.E04 is engineered as a precision gauge pin for fast, repeatable dimensional checks where small tolerances matter. The specified ±0.002 mm tolerance ensures that measurements used for go/no‑go checks and alignment tasks remain consistent over repeated use, reducing rework and inspection time. The relatively compact 50 mm length and exact 14.04 mm diameter make this pin ideal for end‑measure verification, fixture set‑up and comparative testing in busy workshop processes where throughput and reliability are essential. Robust construction tuned to workshop conditions Manufactured from special steel, this single pin is finished for durability and stable performance under regular handling. The workshop-grade execution provides resistance to everyday knocks and abrasion without compromising measurement integrity. Supplied individually and packed in a protective transport case, the pin is kept secure during storage and transit, which helps maintain the measurement surface and preserves repeatability across measurement cycles. Practical applications and handling benefits This gauge pin suits quick dimensional checks, plug‑type verification and fixture alignment tasks commonly found in maintenance and production control. At a weight of approximately 0.1 kg, the pin balances easy manual handling with a solid feel at the point of inspection. Delivered as a single item, it integrates simply into existing inspection benches and pin sets, enabling straightforward replacement or targeted checks without the need for extensive tooling changes. Fit into quality workflows with minimal overhead For workshop and small‑series production, the pin offers a low‑effort way to uphold tolerances during assembly and machining operations. Its clear specification and compact format reduce decision time when selecting inspection aids, while the Metav IndustryLine designation signals consistent procurement and dependable stock availability from a central European quality filter. Using dedicated gauge pins for frequent checks supports traceable, auditable inspection routines and helps keep production moving with fewer interruptions. Contact Metav Werkzeuge for tailored advice on using the Metav IndustryLine gauge pin in specific inspection setups or to request immediate availability from our Emmerich warehouse, info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M323.E04 GTIN: 4061905068638 Label: Prüfstift, einzeln, 14,04 mm Länge 50 mm Facts Length: 50 mm Diameter: 14.04 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Supplied individually in a protective transport case Category: Gauge pins Storytrigger: end‑measure checks FAQ What inspection tasks is this gauge pin suitable for? This gauge pin (Metav IndustryLine gauge pin M323.E04) is suitable for end‑measure verification, plug‑type dimensional checks and fixture alignment in workshop and production control environments. Is the measurement tolerance suitable for precision assembly work? Yes, the specified tolerance of ±0.002 mm for the M323.E04 makes it suitable for precision assembly and quality control tasks that require tight repeatability. How is the pin supplied and protected during transport? The gauge pin is supplied individually and delivered in a protective case to preserve the measuring surface and ensure reliable repeatability after storage or transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.06mm Gauge Pin 50mm Length, Workshop Version, Special Steel ±0.002mm - Metav IndustryLine
Combining workshop-grade robustness, ±0.002 mm repeatability and a compact 50 mm length, this single gauge pin supports consistent fit and end‑dimension checks in production and inspection tasks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice and integration options. Gauge pin M323.E06 — single gauge pin, 14.06 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin for precise fit and end‑dimension verification in workshop and inspection settings, presented in a resilient workshop design for regular use. Workshop version for robust everyday use Diameter 14.06 mm for precise fit checks Length 50 mm compact and easy to handle High accuracy ±0.002 mm for reliable checks Reduce rejects with measurable precision The compact design delivers a clear metrological advantage: a 14.06 mm nominal diameter combined with an accuracy of ±0.002 mm yields highly repeatable fit verifications and gauge comparisons. For routine inspection, the narrow tolerance band reduces ambiguity in acceptance decisions and shortens downstream rework cycles. The specified precision is especially beneficial where small clearances and press fits determine assembly quality; the result is fewer rejections and a more predictable production flow. Built for everyday workshop use and handling Designed as a workshop version, the pin balances durability with ease of handling. The special steel construction resists wear in repetitive use and maintains dimensional stability over many cycles, which supports consistent measurement results on the shop floor. The 50 mm length provides a practical grip and avoids excessive cantilever during insertion, making the pin straightforward to position in jigs, bores and assemblies. Delivered in a transport case, the item remains protected between shifts and during transport. Practical information for integration and inspection routines The single‑piece design simplifies inventory and replacement planning: the item is stocked under SKU M323.E06 and identified by GTIN 4061905065910 for traceable procurement. With a nominal diameter of 14.06 mm and a weight around 0.1 kg, the pin is easy to store and deploy in fixture sets or gauge kits. The straightforward geometry supports both manual checks and use as a reference pin in comparison tests, enabling standardised acceptance criteria across multiple stations. Contact Metav Werkzeuge for tailored workshop gauging and technical advice on integrating the Metav IndustryLine gauge pin M323.E06 into existing inspection processes Technical Data SKU: M323.E06 GTIN: 4061905065910 Brand: Metav IndustryLine Label: Gauge pin, single, 14.06 mm, length 50 mm Facts Diameter: 14.06 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop design Material: Special steel Delivered in transport case Single gauge pin FAQ What tolerance can be expected from this gauge pin? The Metav IndustryLine gauge pin M323.E06 is specified with an accuracy of ±0.002 mm, making it suitable for fine fit and end‑dimension checks where tight tolerances are required. Is the pin suitable for regular shop‑floor use? Yes. This workshop version is made from special steel and built for repetitive handling and insertion, offering durability for daily inspection routines. Can the pin be used in comparison checks and fixture testing? The straight, single‑piece geometry of SKU M323.E06 is ideal for fixed reference checks, comparative gauging and as a fixture plug for pass/fail assessments. How is the product supplied for storage and transport? The gauge pin is supplied protected in a transport case to prevent damage during storage and movement between workstations. Which identifier should be used for procurement and traceability? Use SKU M323.E06 or GTIN 4061905065910 for ordering and traceability within procurement systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.07mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of workshop‑grade durability, ±0.002 mm accuracy and a compact 50 mm length to streamline fixture setting and end‑measure checks. Order directly via Metav Werkzeuge or contact our consultants for application advice and availability. Gauge Pin M323.E07 — 14.07 mm diameter, 50 mm length (Metav IndustryLine) The Gauge Pin M323.E07 is a single, workshop‑grade precision gauge pin designed for end‑measure verification, fixture setting and repeatable inspection tasks in production and maintenance environments. Workshop‑grade design for daily use Diameter 14.07 mm for end‑measure checks Length 50 mm for fixture and setting Tolerance ±0.002 mm for high repeatability Reliable accuracy for repeatable measurement results Built for applications where dimension control matters, this gauge pin delivers a specified deviation of ±0.002 mm, which supports tight process control and reduces downstream rework. The stated tolerance means that each pin conforms closely to its nominal diameter so that mating holes and gauge sets can be verified with confidence. For metrology and quality assurance tasks, the direct consequence is faster decision making: pass/fail checks become consistent and less dependent on operator judgement, improving throughput in inspection loops. Compact form factor that speeds up setup With a 14.07 mm diameter and a 50 mm length, the pin is sized to fit typical fixture seats and locating holes while remaining easy to handle. The special steel construction offers the rigidity needed for repeated seating without significant wear, and the modest mass supports swift insertion and removal during setup cycles. In everyday workshop use the compact dimensions reduce handling time and allow one–person operation for many tasks; the single‑item delivery suits selective replacement or bespoke gauge assemblies. Traceability, inventory and workshop compatibility Identified as M323.E07 and listed with GTIN 4061905066269, the pin integrates cleanly into parts lists and inventory systems. Its workshop specification highlights suitability for routine production environments rather than delicate laboratory contexts. The combination of clear labelling and robust construction simplifies stock management and lowers the risk of mismatching components in gauge blocks or fixture packs. For operations aiming to standardise tooling, the pin represents a precise, easy‑to‑store component for recurring measurement operations. For workshop‑ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for personalised advice, stock information and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M323.E07 GTIN: 4061905066269 Manufacturer: Metav IndustryLine Label: Gauge Pin, single, 14.07 mm dia, 50 mm length Dimensional data Diameter: 14.07 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg ECLASS: 21170231 Special features Material: Special steel Workshop‑grade execution Category: Gauge pins Single item supply FAQ What measurement tolerance does this gauge pin offer? The M323.E07 gauge pin is specified with a tolerance of ±0.002 mm, providing high repeatability for end‑measure checks and gauge comparisons. For which tasks is this gauge pin suitable? This single gauge pin is intended for end‑measure verification, fixture setting and routine inspection tasks in workshop and production environments where robust, repeatable locating is required. What material is used and how does it affect durability? The pin is made from special steel, which provides the rigidity and wear resistance needed for frequent seating and handling in a workshop setting. How is the part identified for inventory and ordering? The product is listed as M323.E07 with GTIN 4061905066269, allowing clear identification in inventory systems and order lists. Is this gauge pin suitable for inclusion in a gauge set or fixture pack? Yes, the compact dimensions (14.07 mm × 50 mm) and workshop execution make the pin well suited for integration into gauge sets and fixture assemblies where consistent locating is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.08mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop‑grade construction, 14.08 mm diameter precision and a compact 50 mm length to secure repeatable end‑dimension checks and simple fixture alignment; order directly via Metav Werkzeuge or contact the consultants for specification advice. Gauge pin M323.E08 — 14.08 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.E08 is a workshop‑grade precision inspection pin designed for end‑dimension verification and alignment tasks in production and inspection environments. Workshop‑grade construction Diameter 14.08 mm precision Compact 50 mm overall length Accuracy ±0.002 mm Reliable inspection for tight tolerances The M323.E08 pin delivers ±0.002 mm tolerance, making it suitable where repeatable close‑fit checks are essential. As a hardened, single gauge pin it functions as a direct comparative standard for bore‑go/no‑go checks and end‑dimension verification, reducing ambiguity in the measurement chain. The quoted accuracy refers to the manufacturing tolerance of the pin itself and ensures that fits and clearances can be assessed with confidence in routine shop inspection and setup tasks. Durable workshop design for everyday handling Manufactured from special steel, this workshop edition is intended for frequent use in machining and assembly areas. The 50 mm length and compact profile allow secure seating in fixture holes and jigs while keeping handling straightforward. Robust material selection minimises wear over repeated insertions, so the component maintains its dimensional integrity across repeated cycles and supports longer intervals between replacement. Seamless integration into quality control workflows The pin is a single‑piece gauge that fits directly into inspection sequences and assembly checks; its simple geometry reduces interpretation time and speeds decision making on the shop floor. Traceability is supported by the SKU and GTIN, which helps with inventory control and batch documentation. Use of standard sizes such as 14.08 mm simplifies stockkeeping and ensures compatibility with common fixtures and gauges found in metalworking and inspection departments. Contact Metav Werkzeuge for detailed specification matching or to procure the Metav IndustryLine gauge pin M323.E08 for immediate inclusion in inspection routines Technical data SKU: M323.E08 GTIN: 4061905066900 Product: Gauge pin, single Label: Gauge pin, single, 14.08 mm, length 50 mm Facts Diameter: 14.08 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: Special steel Version: Workshop edition Category: Gauge pins / Messstifte Story trigger: End dimensions FAQ What tolerance is specified for this gauge pin? The gauge pin M323.E08 is manufactured to an accuracy of ±0.002 mm, providing a stable reference for tight tolerance checks. For which inspection tasks is this pin suitable? This pin is intended for end‑dimension verification, bore checking and alignment tasks in machining and assembly workflows where a compact, durable reference is required. What material is the pin made from and how does that affect service life? The pin is made from special steel, chosen for wear resistance under regular insertion and handling, which helps preserve dimensional stability over repeated use. How is the product identified for inventory and traceability? Identification is via SKU M323.E08 and GTIN 4061905066900, which support purchasing, stock control and documentation processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.09mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precise diameter control and robust workshop design to improve inspection throughput; combine the 14.09 mm diameter with a tight ±0.002 mm tolerance and stable 50 mm length for reproducible end‑measurements. Order via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.E09 — 14.09 mm diameter, 50 mm length (Metav IndustryLine) A Test pin M323.E09 intended for precision end‑measurement and inspection tasks in workshops and quality control stations. Workshop‑grade special steel construction Diameter 14.09 mm with ±0.002 mm tolerance 50 mm length for stable probing Supplied in protective transport box Accurate diameter control for reliable inspection This gauge pin delivers a 14.09 mm nominal diameter with a verified ±0.002 mm variation, making it suitable for tight tolerance checks and final‑dimension inspection. The declared tolerance supports reproducible plug‑gauging and pass/fail checks, reducing rework and inspection time. For teams performing frequent end measurements, the narrow variance translates directly into fewer false rejects and steadier process capability. Built for routine workshop use and handling Constructed from special steel and presented as a workshop version, the pin combines material resilience with a compact 50 mm shaft that eases handling and positioning in fixtures. The modest mass supports quick manual operations while the length provides sufficient engagement for stable probing and repeatable seating in jigs. Delivered in a protective transport box, the item is protected during storage and transit, helping maintain surface quality and dimensional integrity. Simple integration into quality workflows Identified as a single test pin with SKU M323.E09 and GTIN 4061905066917, the component slots easily into inspection kits and fixture sets. Traceable identification simplifies stock management and replacement planning in production lines. Backed by Metav IndustryLine’s emphasis on accessible precision, the piece benefits from a supplier network that prioritises consistent availability and clear product information for industrial purchasers. Speak with Metav Werkzeuge for tailored advice on using the Metav IndustryLine test pin M323.E09 in existing inspection routines; contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and ordering assistance Technical Data Article number: M323.E09 GTIN: 4061905066917 Label: Test pin, single, 14.09 mm diameter, length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 14.09 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Supplied in protective transport box Category: Gauge pins FAQ What level of dimensional accuracy does the pin offer? The test pin M323.E09 is specified with a tolerance of ±0.002 mm, suitable for tight end‑measurement and precision gauging operations. Is the pin suitable for fixture or jig use in production environments? Yes, the 50 mm length and workshop‑grade construction make the gauge pin well suited for repeated seating in fixtures and jigs during production checks. How is the item supplied to preserve its condition? The product is supplied in a protective transport box to minimise damage during handling and storage and to keep the measuring surface in good condition. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.11mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
High-repeatability end measurements are achieved by combining a 14.11 mm diameter with a ±0.002 mm tolerance and a robust special steel construction; the single-piece design and 50 mm length suit routine workshop verification and fixture checks. Order the test pin directly via Metav Werkzeuge or consult the Metav specialists for application advice. Test pin, single, 14.11 mm × 50 mm — workshop-grade gauge pin by Metav IndustryLine with ±0.002 mm tolerance A single test pin designed for precise end-measurement, fixture verification and plug-gauge reference tasks in workshop metrology. Workshop-grade construction Diameter exactly 14.11 mm Length 50 mm for stable handling Tolerance ±0.002 mm Repeatable end measurements for production control The compact gauge pin provides a strictly defined reference for end measurements and plug-gauge checks, enabling consistent results across repeated inspections. With a nominal diameter of 14.11 mm and a stated tolerance of ±0.002 mm, the pin functions as a reliable dimensional standard for component end faces and bores. The special steel material offers the stiffness required to minimise elastic deformation during contact, so measurements remain reproducible even under frequent use. This precision orientation supports efficient quality control and shortens inspection lead times by reducing rework cycles. Robust workshop design that stays ready for use Designed as a workshop version, the pin balances handling comfort with mechanical integrity. The 50 mm overall length provides sufficient contact area for stable seating in fixtures while remaining compact enough for single-handed positioning; the unit weight of 0.10 kg contributes to a solid feel without unnecessary bulk. Delivered as a single item, the pin is suitable for direct integration into manual inspection routines, assembly jigs and reference sets. The hardwearing surface of the special steel resists everyday wear and ensures long-term dimensional stability, reducing the need for frequent replacement. Practical applications and system integration This gauge pin is intended for end-measurement tasks, reference checks in assembly fixtures and use as a master plug in plug-gauge comparisons. Its nominal diameter and tolerance make it appropriate for verifying mating parts, locating bores and confirming end positions where a precise cylindrical datum is required. The single-piece configuration supports straightforward handling in measuring benches and control stations, and the clear specification simplifies procurement and documentation for quality systems. For batch inspections, the pin can be used alongside production gauges to validate tool settings and machine outputs. For workshop-grade repeatability rely on Metav IndustryLine components; contact Metav Werkzeuge for tailored advice and procurement assistance. Technical data Article number: M323.E11 GTIN: 4061905066931 Manufacturer: Metav IndustryLine Key figures Diameter: 14.11 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.10 kg Special features Material: special steel Delivery: single test pin Suitable for end-measurement and plug-gauge reference Workshop version for routine inspection FAQ What is the exact diameter and tolerance of the gauge pin? The gauge pin has a nominal diameter of 14.11 mm and a tolerance of ±0.002 mm, specified for high-repeatability end measurements. Is the pin supplied as an individual unit or in sets? This item is supplied as a single test pin (SKU M323.E11) suitable for direct use in fixtures and verification workflows. What material is used for the pin and why is it relevant? The pin is made from special steel, chosen for its stiffness and wear resistance to maintain dimensional stability under regular contact. Can this pin be used for plug-gauge checks and fixture locating? Yes, the geometry and tolerance are intended for plug-gauge comparisons, fixture verification and locating tasks where a precise cylindrical datum is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.12mm Gauge Pin Length 50mm Workshop Version, Steel Case - Metav IndustryLine
Take advantage of precise end‑size control and robust workshop construction: the gauge pin combines a 14.12 mm calibrated diameter with ±0.002 mm accuracy and a 50 mm working length for reliable, repeatable checks; order directly via Metav Werkzeuge or contact the team for advice. Gauge pin, single, 14.12 mm diameter, 50 mm length — Metav IndustryLine The gauge pin, single, 14.12 mm diameter, 50 mm length is a compact test pin for fast end‑size inspection, alignment and go/no‑go checks in toolrooms and production environments. 14.12 mm precision diameter ±0.002 mm high accuracy Workshop‑grade special steel Precision that reduces rework and speeds inspection A high‑resolution diameter of 14.12 mm combined with a verified ±0.002 mm tolerance gives a clear, quantifiable basis for acceptance decisions. This level of accuracy minimises rework and scrap by ensuring that mating parts and bores are checked with repeatable results; the fine tolerance is especially valuable where small deviations cause assembly problems. The pin’s specification supports quick pass/fail assessments in quality control routines, which reduces cycle time and keeps production flowing. Robust construction for everyday workshop use Manufactured from special steel and finished as a workshop‑grade tool, the pin withstands routine handling and frequent insertion into gauges and fixtures. With a 50 mm overall length and compact profile, the test pin is easy to position and to store alongside inspection kits, while its low mass aids quick manoeuvring during series checks. The design balances stiffness and handling so that the operator can perform rapid measurements without introducing sag or unwanted deflection. Practical integration and traceable identification The single test pin simplifies inventory and tool‑setting procedures: it is supplied as an individual gauge with clear identification (SKU M323.E12) and a global trade item number for procurement. Using a dedicated, standardised pin for end‑size checks reduces setup complexity across different machines and fixtures, and the clear technical specification supports documented quality workflows. For applications that demand fast, objective go/no‑go decisions, this precision pin integrates easily into established inspection stations and QA documentation. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for supply and expert advice at info@metav-werkzeuge.com or +49 2822 7131930, and ensure the right gauge pin is selected for the task. Technical data Article number: M323.E12 GTIN: 4061905066948 SKU: M323.E12 Description: Single gauge pin, diameter 14.12 mm, length 50 mm Facts Diameter: 14.12 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Measurement range: 14.12 mm Eclass: 21170231 FAQ What is the primary use of this gauge pin? The gauge pin is intended for end‑size inspection and quick go/no‑go checks; the gauge pin (M323.E12) is suitable for verifying bore diameters, alignment and fit during setup and quality control. How precise is the pin for dimensional verification? The test pin provides a ±0.002 mm accuracy rating, offering a high degree of dimensional reliability for critical inspection tasks. Which materials is the pin compatible with when checking parts? The pin itself is made of special steel and is used to measure components irrespective of the part material; it checks physical dimensions rather than machining compatibility. Is the gauge pin suitable for repeated workshop use? Yes, the workshop‑grade construction is designed for frequent handling and routine checks in production and toolroom environments. How is the item referenced for procurement and documentation? Procure and document the part using SKU M323.E12 and GTIN 4061905066948 to ensure consistent replacement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.13mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of high dimensional accuracy, robust special‑steel construction, and compact workshop design for reliable fit checks and repeatable end‑dimension verification. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for application guidance. Gauge pin, single, Ø 14.13 mm – length 50 mm (Metav IndustryLine) The gauge pin, single, 14.13 mm is a precision probe for end‑dimension checks and bore verification in workshop and inspection routines. Workshop design for everyday inspection Diameter 14.13 mm for precision fit checks Length 50 mm for bore and depth access Special steel construction, accuracy ±0.002 mm Precision where end dimensions matter This compact inspection element delivers ±0.002 mm dimensional consistency, making it suitable for verification of final tolerances and tight fits. The 14.13 mm diameter is manufactured to narrow tolerances to support pass/fail checks and plug‑gauge style applications. Because the component is produced in a workshop specification, it balances repeatability with durability, allowing quality teams to rely on stable readings during routine production sampling. The special steel construction provides a hardwearing contact surface that helps maintain gauge integrity under regular use. Designed for practical workshop use With a 50 mm length and a low mass of approximately 0.1 kg, this single gauge element is easy to handle and to insert into bores or fixtures without upsetting the measured part. The straightforward form factor supports quick checks in assembly, jig set‑up and incoming inspection, reducing process interruptions. The workshop version is optimised for practical handling and repeated contact; the material choice and machining quality reduce wear and support consistent measurement cycles in a production environment. Benefits for process control and traceability Using a stable reference like this pin improves first‑pass yield and shortens inspection times by providing an unambiguous, repeatable check for mating parts and end dimensions. Integrating such a reference into documentation and inspection plans supports traceable quality control and clearer go/no‑go decisions on the shop floor. Sourcing through Metav IndustryLine ensures access to a broad range of compatible measuring aids and a dependable supply chain centred in Emmerich, which helps to keep measurement capability available where it matters most. Request the Metav IndustryLine gauge pin (M323.E13) via Metav Werkzeuge for robust end‑dimension checks and dependable workshop performance Technical data Article number: M323.E13 GTIN: 4061905066955 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 14,13 mm Länge 50 mm Core dimensions Diameter: 14.13 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Materials and features Material: Special steel Version: Workshop design Item type: Single gauge pin Typical application: End‑dimension checks and fit verification FAQ What tolerance does this gauge pin provide? The product is specified with a dimensional tolerance of ±0.002 mm, shown in the technical data for the Metav IndustryLine gauge pin M323.E13. What materials is the pin made from? The gauge pin is manufactured from special steel, chosen to provide a durable contact surface suitable for routine fit and bore checks. Is this item suitable for bore and depth verification? Yes, the combination of 14.13 mm diameter and 50 mm length makes the pin suitable for bore checks and for verifying end dimensions in assemblies and fixtures. Is the product supplied individually or as a set? This article is supplied as a single gauge pin; the designation M323.E13 denotes the individual test pin rather than a matched kit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com