Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
13.66mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of precise dimensional control and robust workshop design: the combination of ±0.002 mm tolerance and special steel construction ensures reliable end‑measure checks with low rework rates. Order the gauge pin directly via Metav Werkzeuge or request advice from our consultants for specification matching. Gauge pin M323.D66 — Test pin, 13.66 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin M323.D66 is a precision test pin designed for accurate dimensional verification and alignment tasks in workshop environments, offering a compact format for micro components and inspection fixtures. Workshop version for robust everyday use Diameter 13.66 mm, length 50 mm Tolerance ±0.002 mm for high precision Supplied in protective transport box Precise micro-range performance for small parts Designed for measurements within the micro class, this test pin fits the profile of compact inspection tools used where repeatability and small footprint matter. With a nominal diameter of 13.66 mm and a working length of 50 mm, the component is suited to fine‑mechanical applications and end‑dimension verification. The stated ±0.002 mm tolerance reflects a tight manufacturing specification that reduces uncertainty in assembly checks and bore gauging. For quality control workflows, the narrow tolerance helps distinguish acceptable parts from those requiring rework, speeding decision cycles in production. Robust workshop construction for daily use The workshop version is engineered for routine handling and rapid integration into inspection jigs. Manufactured from special steel, the pin withstands frequent contact and offers dimensional stability under normal workshop conditions. Supplied in a protective transport box, the item arrives ready for secure storage and safe transport between stations. The compact mass and ergonomics enable quick manual positioning while maintaining the stiffness necessary for reproducible measurements during alignment and go/no‑go assessments. Practical application, handling and benefits As a dedicated test pin for end‑measure checks, the component simplifies tasks such as bore gauging, alignment dowelling and reference setting on fixtures. The combination of compact geometry and high repeatability improves measurement throughput and lowers the risk of false rejects. Routine handling tips include keeping contact surfaces clean and using gentle seating force to preserve the repeatability of the measurement. The product’s standard format makes it straightforward to integrate into inspection routines and replace within modular gauge assemblies where interchangeability is required. For reliable workshop inspection from our Emmerich quality centre, contact Metav Werkzeuge to request the Metav IndustryLine gauge pin M323.D66 or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.D66 GTIN: 4061905069017 Material: Special steel Length: 50 mm Diameter: 13.66 mm Tolerance: ±0.002 mm Weight: 0.1 kg Version: Workshop execution Delivery: Protective transport box Facts Length: 50 mm Diameter: 13.66 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Protective transport box Category: Gauge pins Application: End‑measure checks FAQ What applications is this gauge pin suited for? This gauge pin is intended for dimensional verification, bore gauging and alignment tasks; the M323.D66 from Metav IndustryLine is particularly useful for end‑measure checks on small to medium components. How precise is the measurement standard of the pin? The test pin is manufactured to a tolerance of ±0.002 mm, providing a high level of precision suitable for tight inspection criteria and reproducible reference measurements. Is the pin delivered ready for use and how is it packaged? The item is supplied in a protective transport box and delivered as a workshop version ready for immediate integration into inspection workflows. What material is used and how does it affect durability? Made from special steel, the pin combines dimensional stability with resistance to routine wear, supporting frequent handling in workshop environments. Can the pin be used as a reference in fixture assemblies? Yes; the standardised diameter and tight tolerance make the pin suitable as a reference dowel or locating element within modular fixtures and gauge assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.67mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop robustness, tight diameter tolerance and compact length for reliable end‑dimension checks and quick fixture set‑up; order the item directly via Metav Werkzeuge or consult the team for application advice. M323.D67 gauge pin — workshop version, Ø 13.67 mm, 50 mm length (Metav IndustryLine) The M323.D67 gauge pin is a single plug gauge designed for precise end‑dimension verification and fixture alignment in workshop metrology. Workshop version for robust everyday use Diameter precisely ground to 13.67 mm Length 50 mm for compact checking tasks Tight tolerance ±0.002 mm ensures repeatability Precision for end‑dimension verification The M323.D67 from Metav IndustryLine is manufactured for applications where small deviations matter: the 13.67 mm diameter with a declared tolerance of ±0.002 mm provides consistent results when checking end‑masses, seating positions or locating holes. Made from special steel, the gauge pin combines wear resistance with stable dimensional behaviour, so measurements remain reproducible across inspection cycles. This level of control reduces rework and shortens set‑up time on jigs and fixtures. Robust handling and workshop suitability Designed as a workshop version, the test pin balances stiffness and handling for daily use. At a compact 50 mm length and an approximate weight of 0.1 kg, the pin is easy to manoeuvre during assembly checks and bench inspections while maintaining the necessary rigidity for accurate placement. The surface finish and material selection limit fretting and preserve the ground diameter, supporting repeatable seating and minimising measurement drift over time. Practical integration into inspection workflows The pin serves as a dependable reference in go/no‑go sequences, fixture positioning and comparative checks. As a single, individually supplied plug gauge it is suitable for rapid verification tasks and for inclusion in gauge sets. Clear dimensional data and a precise tolerance make it straightforward to document inspection results and to trace measurement deviations back to process steps, improving both quality assurance and throughput in small‑batch or serial production environments. For workshop‑grade precision and specification advice, contact Metav Werkzeuge for availability and tailored application guidance regarding the Metav IndustryLine M323.D67 gauge pin Technical data Article number: M323.D67 GTIN: 4061905069024 Manufacturer: Metav IndustryLine Material: Special steel Facts Diameter: 13.67 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Single test pin (individual delivery) Intended for end‑dimension checks and fixture alignment FAQ What tolerance does the gauge pin offer? The M323.D67 gauge pin is specified with a tolerance of ±0.002 mm for high repeatability in end‑dimension checks. Which material is used for this plug gauge? The plug gauge is made from special steel, chosen for wear resistance and stable dimensional behaviour under workshop conditions. Is the M323.D67 suitable for fixture alignment? Yes, the M323.D67 gauge pin is intended for fixture alignment and quick go/no‑go verification due to its compact 50 mm length and precise diameter. How is the gauge pin delivered? The product is supplied as a single item (individual test pin) suitable for immediate inclusion in inspection routines. Can the pin be used for serial production checks? The tight tolerance and workshop design of the M323.D67 make it well suited to repetitive checks in small‑batch and serial production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.68mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precise diameter control and robust workshop construction to keep inspections consistent and rework rates low; the compact format and tight manufacturing tolerance ensure reliable end‑dimension verification — order directly via Metav Werkzeuge or consult our specialists for application matching. Gauge pin M323.D68 — 13.68 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.D68 is a single precision reference pin designed for fast end‑dimension checks and assembly verification in inspection and workshop environments. Precision diameter 13.68 mm Length 50 mm for compact checks Manufacturing tolerance ±0.002 mm Made from special steel workshop grade Assured dimensional accuracy to reduce rejects and rework The compact gauge pin delivers a reliably machined 13.68 mm diameter with a tight production tolerance of ±0.002 mm, providing a measurable improvement in repeatability for everyday inspection tasks. By using a defined reference pin rather than subjective visual gauging, process control becomes demonstrably more effective: measurement deviation sources are reduced and non‑conforming parts are identified earlier, which supports lean production and lowers downstream correction costs. Durable construction for repeated workshop use Constructed from Special steel and finished for workshop environments, this reference pin combines wear resistance with easy handling in short‑reach checks. The 50 mm length balances stiffness and accessibility for common plug checks, enabling single‑hand operation on benches and inspection stations. The workshop version is optimised for everyday use, resisting abrasion from frequent insertion into bores and providing consistent contact geometry throughout its service life. Traceable identification and simple stock integration Designed as an individual inspection tool, the pin is supplied with clear identification for inventory control: GTIN 4061905069031 and SKU M323.D68 ensure fast reordering and unambiguous traceability in quality documentation. As a compact reference for end‑dimension verification, this component fits into standard inspection routines and complements plug‑gauge sets or comparative checks, helping to document conformity within production records and audit trails. For reliable end‑dimension control in the workshop, request the Metav IndustryLine gauge pin M323.D68 via Metav Werkzeuge or speak with our consultants in Emmerich to confirm suitability for specific inspection tasks Technical data Article number: M323.D68 GTIN: 4061905069031 Category: Messstifte Facts Diameter: 13.68 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Supplied individually Precision manufacturing FAQ What tolerance does this gauge pin offer? The M323.D68 gauge pin is manufactured to a tolerance of ±0.002 mm, allowing it to serve as a reliable reference for precise end‑dimension checks. Is the material suitable for frequent use in a workshop? Yes, the M323.D68 is made from special steel in a workshop configuration, offering wear resistance appropriate for regular insertion and removal. Can this pin be used in documentation and stock systems? The gauge pin carries clear identifiers — GTIN 4061905069031 and SKU M323.D68 — to simplify traceability and replenishment in inventory systems. Is the pin supplied individually or as part of a set? This item is supplied as an individual gauge pin, designed for targeted end‑dimension verification rather than as a set component. Which applications benefit most from this type of gauge pin? Typical uses include bore verification, assembly checking and incoming inspection where a compact, accurate reference is needed for end‑dimension control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.69mm Gauge Pin, 50mm Length, Workshop Version - Metav IndustryLine
Precise workshop-grade gauge pin with a 13.69 mm diameter and 50 mm length, offering a measurement tolerance of ±0.002 mm for repeatable locating and end-measure checks; its special steel construction increases wear resistance in daily use. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.D69 — 13.69 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin M323.D69 designed for accurate end-measure verification, alignment and fixture locating in workshop inspection and toolmaking applications Workshop version for robust shop use Diameter 13.69 mm, precision ±0.002 mm 50 mm effective length for reliable locating Made from special steel for long service life Precision that makes routine checks dependable The inspection pin combines a finely controlled diameter of 13.69 mm with a verified tolerance of ±0.002 mm, providing the dimensional stability required for repeatable processes. In practical terms, this level of accuracy reduces rework and speeds up set‑up because measurement variation is minimised; where alignment or end‑measure checks are frequent, consistent pin dimensions translate into fewer adjustments and a steadier production flow. The tight tolerance is particularly beneficial when used as a reference or locating datum in jigs and fixtures, where small geometric deviations can otherwise accumulate. Built for daily workshop demands As a workshop execution item, the pin is manufactured from special steel, chosen for a balance of toughness and wear resistance to withstand repeated insertions and withdrawal in hardened bores or locating holes. The 50 mm length provides sufficient engagement for stable locating while remaining compact enough for easy handling. Delivered in a transport case to protect the surface finish during storage and movement, the component’s construction focuses on longevity and low-maintenance operation, which supports continuous shop-floor use without frequent replacement. Practical use and compatibility in inspection workflows The pin serves multiple metrology tasks: use as a locating element for fixture set‑up, as a reference for plug checks, and for alignment during assembly operations. The compact geometry makes the part suitable for machine-shop inspection benches as well as toolroom jigs. Because the component is a standard workshop gauge pin, it integrates smoothly into existing measurement routines and fixture geometries; traceable dimensioning and consistent form give staff confidence in go/no‑go assessments and in-process checks, supporting faster decision-making and less downtime. For a tailored parts recommendation or technical clarification from Metav Werkzeuge in Emmerich, request a quotation or specification check via email or phone to ensure the M323.D69 suits the intended inspection task Technical data Article number: M323.D69 GTIN: 4061905069048 Label: Prüfstift, einzeln, 13,69 mm Länge 50 mm Facts Diameter: 13.69 mm Length: 50 mm Tolerance / Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Delivered in a transport case SKU: M323.D69 FAQ What is the dimensional tolerance of this gauge pin? The gauge pin M323.D69 is specified with a tolerance of ±0.002 mm, ensuring high repeatability for locating and end-measure tasks. Which material is used for the pin? The M323.D69 is made from special steel, selected for a durable surface and resistance to wear under frequent use. Is the pin suitable for fixture locating and alignment? Yes, this inspection pin is intended for locating, alignment and end-measure verification in workshop and toolmaking fixtures. Does the product come with protection for transport? Delivery of the M323.D69 is in a transport case to safeguard the finished surface during storage and movement. Can the gauge pin be used in hardened bores or precision holes? The gauge pin M323.D69 is suitable for use in precision holes and hardened locating bores where tight dimensional stability is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.6mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combine ±0.002 mm repeatability with a 13.6 mm ground diameter and 50 mm hardened length for consistent end‑dimension checks; order the inspection pin directly via Metav Werkzeuge or consult our specialists for application guidance. Inspection pin M323.D60 — gauge pin, 13.6 mm diameter, 50 mm length (Metav IndustryLine) The Inspection Pin M323.D60 is a single gauge pin designed for precise end‑dimension verification in workshop and inspection settings ±0.002 mm tolerance for high repeatability 13.6 mm ground diameter for precise fits 50 mm hardened shaft for stable probing Workshop execution in special steel material Accuracy that reduces rework and inspection time The pin offers a ±0.002 mm tolerance, which translates into reliable repeatability for serial checks and incoming inspection tasks. Such a tight specification minimises ambiguous pass/fail results and helps to reduce downstream rework and scrap rates. In practical terms, high repeatability shortens inspection cycles because fewer cross‑checks are required; this benefits production throughput while maintaining quality control standards. The precision finish on the measuring surface supports consistent seating in gauges and jigs, ensuring that measurement uncertainty stays low even under frequent use. Compact gauge for precise micro‑range measurements Classified in the micro range (measurement span 10–100 mm), this compact gauge pin is optimised for small components and tight tolerance fits. The 13.6 mm diameter and 50 mm length make it suitable for bores, bushings and mating features where a stable reference diameter is required. The small form factor eases handling in dense assemblies and fixture checks, while the ground surface finish ensures accurate engagement with mating parts. The device is particularly useful where dimensional checks must be repeatable across many parts, providing a simple physical reference that complements dimensional measuring systems and reduces interpretation time. Durable, workshop‑grade construction for everyday metrology Manufactured in special steel with a hardened shaft, the pin balances wear resistance with geometric stability for routine workshop use. The workshop execution designation indicates robustness in surface treatment and handling tolerances tailored to industrial environments. The modest weight and solid construction support stable probing and resistance to accidental deformation, preserving the specified tolerance during standard handling and storage. As a basic but critical tool in the gauge set, this pin provides a dependable mechanical reference that integrates with inspection benches, plug gauge sets and functional test fixtures. Contact Metav Werkzeuge today to specify the right gauge pin for inspection tasks or to discuss compatibility with existing gauge sets; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.D60 GTIN: 4061905067983 Manufacturer: Metav IndustryLine Facts Diameter: 13.6 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pin (Messstifte) FAQ What nominal diameter does this gauge pin have? The gauge pin has a nominal diameter of 13.6 mm and is supplied as the single inspection pin M323.D60 for dimensional reference. What level of repeatability can be expected? Repeatability is specified at ±0.002 mm, enabling consistent comparative checks and reducing ambiguous inspection results with the Metav IndustryLine inspection pin. For which applications is this pin best suited? This pin is intended for end‑dimension checks in workshops, fixture verification and plug‑fit testing of bores and mating features where micro‑range accuracy is required. What material and construction define its durability? The pin is made from special steel in a workshop‑grade execution with a hardened shaft to resist wear and maintain geometric stability during routine use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.71mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Compact workshop-grade gauge pin precision and rugged construction combine to deliver reliable dimensional checks: 13.71 mm diameter with a manufacturing tolerance of ±0.002 mm, made from special steel and supplied ready for workshop use; order the component directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.D71 — 13.71 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.D71 is a single workshop-grade test pin for fast, repeatable dimensional checks in machining, fixture set‑up and quality inspection. Workshop-grade construction Precision ±0.002 mm Diameter 13.71 mm Length 50 mm single pin Accurate checks for production and inspection Designed for straightforward dimensional verification, the gauge pin delivers precision where repeatability matters. The specified manufacturing tolerance of ±0.002 mm ensures that the pin is suitable for tight control tasks in machine shops and jig set‑ups, providing a clear numerical basis for pass/fail decisions. Using a defined-diameter reference such as 13.71 mm reduces interpretation effort during in-line checks and supports efficient process control. Robust build for everyday workshop use Built in a workshop version and manufactured from special steel, this test pin tolerates regular handling and contact with typical workshop environments. The robust material choice provides wear resistance for frequent seating and withdrawal operations; as a result, inspection intervals are extended and tool turnover is reduced. Supplied in a protective transport case, the single pin remains secure during storage and transit, helping to keep the dimensionally critical surface free from nicks or contamination. Practical handling and integration into workflows At 50 mm overall length and approximately 0.1 kg in mass, the pin is compact enough for manual use yet long enough for stable engagement in most fixtures. The single‑piece design suits uses where a dedicated reference pin is required — for locating bores, checking plug fits or setting up mandrels. Supplied under the Metav IndustryLine label (SKU M323.D71), the component benefits from Metav’s logistics and quality filter based in Emmerich, providing reliable supply and straightforward reordering for ongoing production needs. Contact Metav Werkzeuge for a targeted recommendation on how the Metav IndustryLine 13.71 mm gauge pin fits specific inspection routines, or request technical details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.D71 GTIN: 4061905069789 Brand: Metav IndustryLine Material: Special steel Weight: 0.1 kg Core dimensions Diameter: 13.71 mm Length: 50 mm Manufacturing tolerance: ±0.002 mm Design & special features Workshop-version finish Single gauge pin configuration Supplied in a transport case FAQ What tolerance can be expected from this pin? The gauge pin is manufactured to a tolerance of ±0.002 mm, making it suitable for tight dimensional checks. What material is the pin made from? The pin is produced from special steel, specified for durability and wear resistance in workshop environments. Is the pin supplied ready for use and how is it packaged? Yes — the single test pin is finished for immediate use and is supplied protected in a transport case to prevent damage during handling. Which SKU and GTIN identify this product? This item is listed as SKU M323.D71 and GTIN 4061905069789 under the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.72mm Test Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, compact micro‑range sizing and robust workshop construction for reliable hole verification and assembly checks; order this gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, Ø 13.72 mm, 50 mm length — Metav IndustryLine Gauge pin, single, 13.72 mm for precise hole verification and end‑measure controls in workshop and inspection environments Workshop version for robust use Diameter 13.72 mm, precision ±0.002 Length 50 mm, hardened special steel Supplied in protective case Precision where tight fits are required The gauge pin is manufactured to deliver repeatable dimensional checks for bores and mating parts. With a nominal diameter of 13.72 mm and a stated tolerance of ±0.002 mm, this inspection pin supports axial and end‑measurement routines where small deviations matter. The compact geometry and controlled diameter make it suitable for comparative fits and functional checks in small assemblies; the specification helps to reduce ambiguous interpretations in routine quality control. Designed for frequent workshop use Built as a workshop version, the pin combines wear resistance with straightforward handling. The 50 mm length provides an accessible engagement depth for many standard components while keeping the probe lightweight at approximately 0.1 kg, aiding manual alignment and positioning. The choice of special steel ensures surface integrity under frequent contact, which translates into longer service intervals and fewer replacements in a production environment. How this aids quality assurance processes Integrating the pin into inspection sequences shortens go/no‑go decisions: the tight ±0.002 mm specification directly supports objective acceptance criteria, reducing rework and improving throughput. As a micro‑range instrument (appropriate for measurements under 100 mm), it is especially suited to precise tasks in precision engineering, toolmaking and component finishing where dimensional certainty is required at the point of assembly or during final inspection. Handling, storage and practical benefits The delivery in a protective case reduces the risk of transit or workshop damage and simplifies storage between uses. The compact form factor and clear dimensional specification make the pin easy to catalogue and retrieve for recurring checks. For users seeking dependable reference tools for hole gauges, plug checks or end‑dimension confirmation, this inspection pin offers a robust balance of precision, durability and workshop practicality. Contact Metav Werkzeuge for specification matching and to reserve this Metav IndustryLine gauge pin (SKU M323.D72) for your inspection equipment from our Emmerich stock Technical data Article number: M323.D72 GTIN: 4061905069796 Label: Gauge pin, single, 13.72 mm, length 50 mm Facts Diameter: 13.72 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Delivered in protective case Story trigger: end‑measure checks FAQ Is this gauge pin delivered ready for use? The gauge pin is supplied as a ready‑to‑use inspection item; the Metav IndustryLine gauge pin (SKU M323.D72) arrives protected in a case for immediate integration into inspection routines. What level of precision can be expected from the pin? The inspection pin is manufactured to a diameter of 13.72 mm with a tolerance of ±0.002 mm, providing the repeatability required for fine tolerance hole verification. Which materials is this pin suitable for checking? The gauge pin is intended for dimensional checks of holes and mating parts across typical workshop materials; the Metav IndustryLine gauge pin is used for end‑measure and bore verification in metal and engineered components. How should the pin be stored between uses? Store the pin in its protective case to prevent surface damage and contamination; keeping the tool dry and secured prolongs dimensional stability and service life. Can this pin be used for functional fit checks on assemblies? Yes, the pin’s controlled diameter and workshop‑grade construction make it suitable for plug‑fit and end‑measure checks within assembly and inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.73mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of ±0.002 mm tolerance and a robust special steel construction to secure reliable end‑measure checks in the workshop; order the pin via Metav Werkzeuge or consult our advisors for specification support. Gauge pin M323.D73 – single test pin, Ø 13.73 mm, length 50 mm (Metav IndustryLine) The gauge pin M323.D73 is a workshop‑grade test pin designed for accurate dimensional verification and end‑measurement tasks in production and inspection environments. Precision tolerance ±0.002 mm Diameter 13.73 mm, length 50 mm Workshop design, hardened special steel Accurate dimensional checks that reduce rework and scrap The M323.D73 delivers repeatable measurement accuracy thanks to its rolled and finished diameter of 13.73 mm and a verified tolerance of ±0.002 mm. In practice, this level of precision minimises false rejects and shortens inspection loops: a single, calibrated reference pin replaces time‑consuming comparisons and reduces the need for iterative machining corrections. The special steel construction preserves roundness and surface integrity under regular use, supporting consistent contact conditions for go/no‑go or reference gauging. For production planners, the measurable benefit is straightforward — fewer process stoppages and more predictable part yields. Robust workshop design for everyday handling and traceable checks Built as a workshop‑execution tool, the pin balances durability with manageable weight, making frequent handling straightforward. The 50 mm length provides ample engagement for end‑face and depth checks while remaining compact enough for handheld or fixture use. Ground and hardened surfaces reduce wear and maintain dimensional stability over long service intervals; this supports repeatability across batch inspections. Delivery includes a protective transport case to prevent damage during storage and transit, ensuring the instrument arrives ready for immediate use on the shop floor. Simple integration into inspection routines and fixtures The geometry of this test pin suits a variety of quality workflows: it functions as a reference for end‑measure tests, plug checks and fixture alignment. Where traceable calibration is required, the defined tolerance lets quality engineers set clear acceptance bands and document measurement uncertainty. The compact form factor eases incorporation into bespoke gauges or custom jigs without imposing undue mass or lever effects. With clear, numeric specification and a stable material base, the pin supports lean inspection setups and faster decision making in the quality loop. For workshop‑grade precision and dependable inspection results, request the Metav IndustryLine gauge pin M323.D73 from Metav Werkzeuge or contact our technical advisors via info@metav-werkzeuge.com for application advice and supply options Technical Data Article number: M323.D73 GTIN: 4061905069802 Manufacturer: Metav IndustryLine Facts Diameter: 13.73 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: special steel Supplied in a transport case FAQ What tolerance does this gauge pin offer? The gauge pin M323.D73 is specified with a tolerance of ±0.002 mm, suitable for fine workshop and production checks. Is the pin suitable for fixture reference and alignment? Yes, the robust form and precise diameter of the M323.D73 make it appropriate for fixture alignment, plug checks and as a reference in jigs. What material is the pin made from and why does it matter? The pin is manufactured from special steel, selected to preserve roundness and resist wear during repeated contact measurements. Does the product arrive protected for transport? The test pin is supplied in a protective transport case to prevent handling damage and to keep the measuring surface intact. Can this pin be used for end‑measure checks on machined components? Its geometry and tolerance make the M323.D73 well suited to end‑measure verification and repeatable dimensional checks in production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.74mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of 13.74 mm diameter, 50 mm length and a tight ±0.002 mm tolerance to secure repeatable end‑size inspections in the workshop; order the gauge pin directly via Metav Werkzeuge or consult our technical team for sizing advice. M323.D74 gauge pin — 13.74 mm Ø, 50 mm length (Metav IndustryLine) A M323.D74 gauge pin for precise end‑size inspection and plug checking in precision metrology and workshop quality control. Diameter 13.74 mm for end‑size checks Length 50 mm workshop version Tolerance ±0.002 mm high precision Special steel for robust everyday use Reliable accuracy for routine inspection The gauge pin delivers consistent dimensional control where repeatability matters. With a nominal diameter of 13.74 mm and a manufacturing tolerance of ±0.002 mm, this inspection pin supports high‑precision checks during incoming inspection, final control or setting tasks. The tight tolerance reduces rework and ambiguous decisions, so process stability and throughput improve without increasing cycle complexity. The compact form factor is optimised for insertion checks and ring or bore verification where a defined end measurement is required. Workshop design that endures daily use Built in a workshop execution and manufactured from special steel, the inspection pin is designed for frequent handling and rapid checks at the bench. The 50 mm active length gives a practical contact area while keeping handling simple for single‑handed operations or quick fixture checks. The choice of material and the rugged finish provide durability in standard shop environments, helping to maintain nominal diameter and surface condition over repeated use and ensuring a long service life under typical workshop stresses. Fits into quality workflows and gauge sets This inspection pin integrates easily into established quality routines and accessory fixtures. The straightforward geometry makes it suitable for use as a reference plug in gauges, for go/no‑go verification or as a master for visual comparison. Measurable benefits include faster inspection cycles and reduced measurement uncertainty due to the pin’s high repeatability. Documentation of the product specifications simplifies traceability and aids in audit situations, supporting quality management objectives without extra administrative burden. Contact Metav Werkzeuge for personalised advice on integrating the M323.D74 gauge pin into inspection routines or for assistance selecting matching sizes and holders — Metav Werkzeuge is ready to advise from Emmerich. Technical data Article number: M323.D74 GTIN: 4061905069819 Material: special steel Net weight: 0.1 kg Facts Diameter: 13.74 mm Length: 50 mm Tolerance: ±0.002 mm Category: single inspection pin Special features Workshop execution Story trigger: end‑size inspection ECLASS: 21170231 FAQ What material is the pin made from? The M323.D74 gauge pin is manufactured from special steel, selected to provide durability and dimensional stability for workshop inspection tasks. What accuracy can be expected from this inspection pin? The pin is produced to a tolerance of ±0.002 mm, delivering high precision suitable for reliable end‑size checks and repeatable measurements. For which applications is the pin intended? Designed for end‑size inspection, plug checking and use as a reference in gauge sets, the pin is suited to incoming inspection and routine shop checks. Is the length suitable for fixture use? The active length of 50 mm offers a practical balance between engagement depth and handling, making it compatible with common fixtures and quick verification routines. How is the product delivered? The item is supplied as a single inspection pin, ready for immediate use in workshop quality control and inspection procedures. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.75mm Test Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise diameter control and a compact, workshop‑ready design to reduce inspection time and rework. The combination of ±0.002 mm repeatability, special steel construction and a rigid 50 mm length supports reliable end‑measure checks in production. Order the gauge pin directly via Metav Werkzeuge or consult the team for set configurations. Gauge pin, single, 13.75 mm, 50 mm length (Metav IndustryLine) The Gauge pin, single, 13.75 mm, 50 mm length is a workshop‑grade precision pin designed for end‑measure verification and fit checks in metrology and inspection environments. High precision ±0.002 mm Special steel construction 50 mm working length Supplied in transport case Consistent diameter control for fewer rejects The compact diameter of 13.75 mm combined with a verified positional accuracy of ±0.002 mm makes this pin suitable for fast go/no‑go checks and repeatable fit verification. Using a highly stable reference diameter reduces measurement scatter and prevents costly rework by ensuring that bores and mating parts comply with specified end dimensions. The result is a measurable improvement in process reliability and a lower rate of non‑conforming parts. Durable workshop design for everyday use Built as a workshop grade tool, the pin is manufactured from special steel to withstand handling and routine inspection cycles. With a 50 mm working length and a compact overall mass, the item balances rigidity with manoeuvrability for handheld checks and jigs. For transport and site handling the pin is supplied in a protective transport case, which keeps the measuring surface safe and simplifies storage between shifts. Easy integration into inspection routines As a single gauge pin, the component is intended for end‑measure and fit tests on shafts, bore gauges and assembly fixtures. Its small envelope supports quick insertion checks and compatibility with existing inspection rigs. When introduced into standard operating procedures, the pin accelerates quality gates and complements both manual and semi‑automated measurement setups, offering a straightforward way to raise daily inspection throughput. Trusted supply and practical service advantages Sourced via Metav IndustryLine, the product benefits from a European quality filter and the distributor’s long experience in metrology. Metav’s broad range and dependable logistics mean matching accessories or complementary sizes are readily available, helping workshops assemble coherent gauge sets without long lead times. The provenance and supply chain transparency support reproducible results across production batches. Contact Metav Werkzeuge to specify matching pins or to discuss batch supply and delivery options for the workshop‑grade gauge pin M323.D75 Technical data Article number: M323.D75 GTIN: 4061905065651 Label: Gauge pin, single, 13.75 mm length 50 mm Weight: 0.1 kg Facts Diameter: 13.75 mm Length: 50 mm Accuracy: ±0.002 mm Material: Special steel Special features Workshop execution Supplied in a transport case Single gauge pin for end‑measure applications FAQ What is the primary use of this gauge pin? The gauge pin M323.D75 is intended for end‑measure checks and fit verification in inspection routines, enabling rapid control of bore and shaft dimensions. What accuracy can be expected from this workshop pin? The gauge pin offers an accuracy of ±0.002 mm, providing reliable repeatability for routine production checks. What material is the pin made from and why does it matter? The pin is produced from special steel; this enhances surface durability for repeated insertion checks and supports longevity in a workshop environment. How is the pin delivered and stored? The pin is supplied in a protective transport case to preserve the measuring surface during handling and storage. How can the article be identified for reorder? Use the article number M323.D75 or GTIN 4061905065651 when reordering or specifying the item in procurement systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.76mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Combining workshop-grade construction, a compact Ø 13.76 mm diameter and a tight tolerance of ±0.002 mm, this single gauge pin delivers reproducible end‑measure checks and fixture alignment. Order the part directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — Ø 13.76 mm, 50 mm length (Metav IndustryLine) The gauge pin is a workshop‑grade precision pin intended for end‑measure verification, alignment and plug‑gauge tasks in small‑part assembly and quality control. Workshop‑grade precision pin Diameter Ø13.76 mm, length 50 mm Tolerance ±0.002 mm for tight fits Made from special steel for durability Consistent fits for precision assemblies The compact design delivers repeatable positioning where small tolerances determine part function. With a diameter of Ø13.76 mm and a measured tolerance of ±0.002 mm, the pin provides the dimensional reliability required for final checks and go/no‑go verifications. Classified in the Mikro class (suitable for 10–100 mm gauges), this format combines short contact lengths with low flex, making it particularly suitable for delicate components and micro‑assemblies. The tight specification reduces rework and supports faster inspection cycles in production environments. Robust construction that endures workshop use Constructed from special steel in a workshop version, the pin balances wear resistance with dimensional stability during repeated use. The 50 mm length offers sufficient engagement for stable measurements while remaining manageable at the bench, and the single‑piece design simplifies handling and storage. The hardened surface preserves the nominal diameter under frequent contact, extending service life and maintaining the precision required for alignment jigs and fixture set‑ups. Practical handling and traceable performance Supplied as an individual test pin, the part streamlines inventory and enables targeted replacement in modular fixtures. The compact mass and familiar geometry make it easy to integrate into measurement routines without additional tooling. Identified as M323.D76, the gauge pin suits applications where consistent end‑measure checks and plug‑gauge comparisons are part of the quality workflow; documentation and batch identification support process control and traceability in standard workshop settings. For procurement and technical advice on the Metav IndustryLine M323.D76 gauge pin, contact Metav Werkzeuge to discuss suitability for specific fixtures or inspection plans and to arrange supply direct from Emmerich. Technical data Article number: M323.D76 GTIN: 4061905065668 Label: Prüfstift, einzeln, 13,76 mm Länge 50 mm Core specifications Diameter: Ø 13.76 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Features / Materials Material: special steel Workshop version Single gauge pin, individual supply Suitable for end‑measure checks and fixture alignment Classified as Mikro (10–100 mm) FAQ What are the exact dimensions and tolerance of this pin? The M323.D76 gauge pin measures Ø13.76 mm with a length of 50 mm and a tolerance of ±0.002 mm, suitable for tight fit verifications. Is the gauge pin suitable for workshop use? Yes, the Metav IndustryLine workshop version is designed for routine bench use and offers enhanced durability for repeated checks. Is the item supplied as a set or individually? This entry is supplied as a single gauge pin; the product designation is M323.D76 and it is provided individually. What material is used and how does this affect wear? Made from special steel, the pin combines hardness with dimensional stability to resist wear during frequent contact operations. Which applications is this pin intended for? The pin is intended for end‑measure verification, plug‑gauge tasks, alignment and fixture checks in small‑part assembly and quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.77mm Gauge Pin 50mm Length Workshop Version, Special Steel ±0.002mm - Metav IndustryLine
Take advantage of a compact, workshop‑ready solution that combines a Ø 13.77 mm diameter with a 50 mm effective length and a tight accuracy of ±0.002 mm for consistent end‑dimension checks; the part is made from special steel and supplied in a transport case for protected handling. Order the gauge pin directly via Metav Werkzeuge or consult our technical advisors for application support. Gauge pin, single – Ø 13.77 mm, 50 mm length (Metav IndustryLine) A gauge pin, single, 13.77 mm Ø, 50 mm length designed for precise end‑dimension inspection, alignment checks and fixture set‑up in workshop and inspection environments. Precision tolerance ±0.002 mm Ø 13.77 mm, length 50 mm Special steel construction Workshop version, transport case included Reliable accuracy for end‑dimension inspection The measurement pin delivers industrial‑grade repeatability with a declared accuracy of ±0.002 mm, making it suitable for tight fit checks and dimensional verification tasks. With a nominal Ø 13.77 mm and a 50 mm usable shank, the component supports go/no‑go assessments and fine tolerance comparisons in inspection benches and gauge assemblies. The specified tolerance helps reduce rework and supports quality control protocols where measurable, repeatable results are required. Durable design for everyday workshop use Manufactured from special steel, the pin combines wear resistance and dimensional stability to withstand frequent insertion and handling typical in workshop environments. The workshop version designation indicates robustness and practicality: protected edges, straightforward geometry and a finish that eases cleaning. Delivery in a dedicated transport case preserves the gauge during storage and transit, reducing the risk of dings and maintaining measurement integrity between uses. Easy integration into inspection workflows This measurement pin is supplied individually and is simple to incorporate into existing fixtures or pin sets; the compact geometry reduces handling complexity and enables fast swap‑outs during set‑up. Traceable identifiers such as SKU and GTIN facilitate inventory control and documentation within quality systems. The combination of compact size, controlled tolerance and durable material supports efficient inspection cycles and reliable pass/fail decisions on the shop floor. Choose the Metav IndustryLine gauge pin for dependable, workshop‑ready inspection results and contact Metav Werkzeuge in Emmerich for tailored procurement or technical guidance. Technical data Article number: M323.D77 GTIN: 4061905065675 Eclass: 21170231 Label: Gauge pin, single, 13.77 mm length 50 mm SKU: M323.D77 Facts Diameter: 13.77 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Supplied in transport case Single piece delivery FAQ What accuracy can be expected from this gauge pin? The gauge pin is specified with an accuracy of ±0.002 mm, which supports tight dimensional checks and repeatable go/no‑go assessments for precision inspection tasks. Is the pin suitable for workshop use and transport? Yes, this Metav IndustryLine measurement pin is a workshop version and is supplied in a transport case to protect the pin during handling and transit. How is the product identified for inventory and traceability? Identification is provided via SKU M323.D77 and GTIN 4061905065675, enabling integration into inventory systems and quality documentation for the gauge pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.78mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Compact workshop-grade pin in special steel with ±0.002 mm tolerance and 13.78 mm diameter for reliable end‑dimension checks; the 50 mm length offers secure reach into recesses. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, 13.78 mm — 50 mm length (Metav IndustryLine) The Gauge pin, single, 13.78 mm, length 50 mm is a workshop‑grade verification pin designed for precise end‑measure and fit checks in metalworking. Workshop version for robust use Diameter 13.78 mm for precise fitting Length 50 mm for deep reach Tolerance ±0.002 mm for high accuracy Built for dependable workshop verification Made for everyday workshop environments, this inspection pin combines a workshop version design with a special steel construction to resist wear during repeated insertion and withdrawal. The compact profile minimises handling effort while maintaining rigidity, so checks on shafts, bores and assembled components remain reproducible. With this configuration, traceable checks and routine in‑process inspections become straightforward, supporting faster decision‑making on the shop floor and reducing downtime caused by uncertain fits. Precision that reduces rejects and rework The manufacturing tolerance of ±0.002 mm places this pin in a high‑precision category suitable for stringent fit verification; the figure describes the maximum deviation from nominal diameter under standard inspection. Using a gauge with this tolerance improves first‑pass yield by ensuring mating parts meet design allowances before assembly. The 13.78 mm diameter provides a defined reference for limit and clearance testing, translating measurement certainty into fewer rejects and lower rework costs. Practical handling and integration into quality routines At 50 mm length the pin reaches into deeper features without sacrificing control, making it suitable for inline checks and bench measurement tasks. Supplied as a single, ready‑to‑use item, the profile is simple to handle and quick to deploy in go/no‑go procedures or comparison tests. The robust material and workshop finish support repeated use, while the compact format fits tool trays and inspection kits, easing storage and ensuring the pin is available exactly where and when it is needed. Choose the Metav IndustryLine gauge pin for reliable workshop measurement and contact Metav Werkzeuge in Emmerich for personalised technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.D78 GTIN: 4061905066214 Manufacturer: Metav IndustryLine Material: Special steel Weight: 0.1 kg Core specifications Diameter: 13.78 mm Length: 50 mm Tolerance: ±0.002 mm Special features Workshop version Single pin delivery Compact, rigid profile FAQ What tolerance does this gauge pin offer? The gauge pin from Metav IndustryLine is manufactured to a tolerance of ±0.002 mm, enabling high‑precision fit and end‑measure checks. Which material is the pin made from? This inspection pin is produced in special steel, chosen for wear resistance and suitability for frequent workshop use. Is the pin supplied individually or as part of a set? The item is supplied as a single gauge pin under SKU M323.D78, intended for immediate integration into inspection kits. What are the exact dimensions for verification tasks? The pin measures 13.78 mm in diameter and 50 mm in length, providing defined reference geometry for bore and shaft checks. Can this pin be used for end‑dimension and fit control? Yes, the design and accuracy of the Metav IndustryLine gauge pin make it suitable for end‑dimension and fit verification on assembled or individual components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.79mm Gauge Pin Length 50mm Workshop Version, Stainless Special Steel - Metav IndustryLine
Compact precision with a 13.79 mm diameter, ±0.002 mm accuracy and a 50 mm length ensures reliable end‑dimension checks in routine inspection tasks. Benefit from the robust workshop design and proven material choice for consistent measuring results — order the M323.D79 via Metav Werkzeuge or consult our specialists for application support. Gauge pin, single, 13.79 mm × 50 mm (Metav IndustryLine) Gauge pin, single, 13.79 mm × 50 mm is a precision inspection pin designed for accurate end‑dimension verification and go/no‑go checks in workshop and inspection environments. Workshop design for robust use Diameter 13.79 mm, length 50 mm High accuracy ±0.002 mm Made from special steel Precision that secures production decisions The inspection pin delivers repeatable results thanks to a tight tolerance of ±0.002 mm, making it suitable for fine end‑dimension verification where small deviations matter. A nominal diameter of 13.79 mm combined with a defined 50 mm shank length provides a stable reference when inspecting bores, fittings or turned parts. This level of precision supports fast pass/fail decisions and reduces uncertainty in quality control workflows, which in turn minimises rework and production delays. Workshop suitability and everyday handling benefits Engineered as a workshop design, the pin tolerates the demands of regular use while remaining straightforward to handle; the overall mass of 0.1 kg helps with quick manual positioning without fatigue. Constructed from special steel, the pin offers mechanical resilience appropriate for frequent contact with component edges and fixture seats. Supplied as a single unit, it simplifies inventory management for smaller toolrooms and enables selective replacement of worn gauges without affecting entire sets. Integration into inspection routines and supplier trust The component is ready to be incorporated into existing inspection benches, fixture arrays and measuring jigs, helping standardise checks across production lines. Labelling and traceability are supported via the SKU and GTIN in the technical data, easing documentation for incoming inspection or final release steps. Backed by Metav IndustryLine, the item benefits from a supplier network focused on making precision accessible to workshops of every size, reinforcing dependable supply and consistent product quality. Contact Metav Werkzeuge in Emmerich for procurement and technical advice on the M323.D79 inspection pin or request a tailored quotation at info@metav-werkzeuge.com Technical data Article number: M323.D79 GTIN: 4061905066221 Weight: 0.1 kg Material: Special steel Label: Prüfstift, einzeln, 13,79 mm Länge 50 mm Dimensions & accuracy Diameter: 13.79 mm Length: 50 mm Measurement range min: 13.79 mm Measurement range max: 13.79 mm Tolerance/Accuracy: ±0.002 mm Features & application Workshop design Single inspection pin delivery Suitable for end‑dimension checks Category: Gauge pins FAQ What level of accuracy does this inspection pin provide? The M323.D79 gauge pin is specified to an accuracy of ±0.002 mm, offering reliable repeatability for end‑dimension checks. Which materials is the pin made from? The pin is made from special steel, selected for mechanical durability in repetitive inspection tasks. Is the gauge pin delivered as part of a set or individually? This item is supplied as a single inspection pin; the single‑unit delivery simplifies selective replacement. Can the pin be used for go/no‑go testing on turned parts? Yes, the M323.D79 inspection pin is suitable for go/no‑go checks and end‑dimension verification on turned components and fitted assemblies. How is traceability handled for the part? Traceability is supported via the SKU M323.D79 and GTIN 4061905066221, which assist documentation and inventory control Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.7mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from workshop-grade robustness, Special steel construction and ±0.002 mm repeatability for reliable end‑dimension checks; the compact Ø 13.7 mm profile and 50 mm length support precise placement in gauges and fixtures. Order the probe pin directly via Metav Werkzeuge or consult our specialists if needed. Probe pin, single Ø 13.7 mm, L 50 mm (M323.D70) — Metav IndustryLine workshop probe pin Probe pin, single Ø 13.7 mm, L 50 mm engineered for precise end‑dimension verification and gauge applications in workshop and production environments Workshop‑grade execution Special steel, wear‑resistant High repeatability ±0.002 mm Length 50 mm for deep measurements Reliable metrology for end‑size checks This workshop probe delivers high repeatability (±0.002 mm) in a compact form factor, making it suitable for routine end‑dimension verification on production lines and during in‑process inspection. The special steel construction offers enhanced wear resistance compared with standard tool steels, reducing profile change over prolonged cycles and preserving measurement integrity. Designed for straightforward integration into comparative gauges and fixed fixtures, the component supports reproducible results that speed up decision cycles and reduce scrap rates. Compact design that fits tooling and gauges With a nominal diameter of Ø 13.7 mm and an overall length of 50 mm, this single probe pin falls into the Mikro measurement class (max range 10–100 mm), which is ideal where stiffness, repeatability and compactness matter. The short, rigid profile simplifies handling during fixture mounting and minimises bending error during touch‑off operations. Supplied as an individual item, the pin is intended for use in end‑measure assemblies and gauge blocks where exact contact geometry and limited overhang are prerequisites for reliable readings. Practical workshop features and handling benefits The workshop execution emphasises durability and low maintenance: the Special steel material and compact geometry lower the frequency of replacements and downtime. For transport and protection the item is supplied in a dedicated transport case, which helps preserve the contact surface during storage and transit. Light in weight at approximately 0.1 kg, the component is easy to position in small fixtures yet substantial enough to provide stable contact forces for manual and semi‑automated measurement routines. Contact Metav Werkzeuge today to request application advice or to order the M323.D70 probe pin directly from our Emmerich stock and benefit from expert guidance for integration into gauges and fixtures Technical data SKU: M323.D70 GTIN: 4061905069055 Manufacturer: Metav IndustryLine Numbers / Core technical data Diameter: 13.7 mm Length: 50 mm Accuracy / repeatability: ±0.002 mm Weight: 0.1 kg Special features / Versions Material: Special steel Workshop execution Supplied as single probe pin Delivered in transport case FAQ What applications suit this probe pin best? The M323.D70 probe pin is intended for end‑dimension verification, gauge inserts and fixed fixture use where a compact, stiff contact element is required. Is the probe pin supplied calibrated? This particular listing does not state a factory calibration standard; the M323.D70 is supplied in workshop execution with protective case for transport. What material is the pin made from and how does that help? Made from Special steel, the pin offers improved wear resistance and stability compared with basic steels, extending lifetime in frequent contact applications. Can the pin be used in automated test rigs or only manual gauges? The pin’s stiff geometry and compact mass make the M323.D70 suitable for both manual gauges and semi‑automated test rigs where stable contact and minimal deflection are required. How is the product identified for order and traceability? Order and trace the item using SKU M323.D70 and GTIN 4061905069055 for unambiguous identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.81mm Test Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop‑grade test pin that combines tight tolerance (±0.002 mm) with robust special‑steel construction for repeatable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or ask the consultants for tailored advice. Gauge pin M323.D81 — Single test pin, Ø 13.81 mm, 50 mm length (Metav IndustryLine) The Gauge pin, single, 13.81 mm, length 50 mm serves as a hardwearing, precise reference for end‑measure inspections and fit verification in workshop and production environments. Workshop‑grade construction Diameter 13.81 mm, length 50 mm Tolerance ±0.002 mm for precise fits Special steel for long service life Accurate fits for repeatable inspection results This single test pin is engineered for precision checks where repeatability matters. With a nominal diameter of 13.81 mm and a documented tolerance of ±0.002 mm, the pin provides a measurable basis for go/no‑go assessments, fixture setting and assembly verification. The quoted tolerance level places the component in a category suitable for tight tolerance work commonly found in jigs, gauges and final‑dimension controls; this reduces rework and shortens inspection cycles by delivering consistent, verifiable results. Robust workshop design that withstands daily use Made from special steel and produced in a workshop version, the pin balances surface hardness with corrosion resistance to endure repeated insertion and contact with mating parts. The 50 mm length makes it compact and easy to handle within toolrooms and on the shop floor, while the solid construction avoids deformation under normal use. These characteristics translate into lower maintenance effort and predictable wear behaviour, supporting steady production throughput. Practical compatibility and typical applications Designed as a single gauge pin for end‑dimension and fit checks, this test pin is suitable for insertion into locating bushes, alignment fixtures and comparator set‑ups. It functions well as a reference for small‑batch quality control, prototype validation and routine incoming‑inspection tasks. The modest mass and compact format allow easy integration into existing gauge sets or bespoke fixtures, helping to maintain consistent reference standards across multiple workstations. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge for product advice and assured supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M323.D81 GTIN: 4061905066696 Brand: Metav IndustryLine Category: Gauge pins Label: Gauge pin, single, 13.81 mm, length 50 mm Facts Diameter: 13.81 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Accuracy specification: ±0.002 Special features Workshop‑grade execution Material: special steel Single test pin configuration Intended for end‑dimension checks FAQ What applications are suitable for this gauge pin? The gauge pin M323.D81 is intended for end‑dimension checks, fixture set‑up, insertion into locating bushes and fit verification in workshop and production environments. What level of precision can be expected from this pin? With a tolerance of ±0.002 mm, the pin offers tight‑fit accuracy suitable for high‑repeatability checks and precision assembly support. What is the pin made from and is it durable? The pin is manufactured from special steel in a workshop‑grade execution, providing wear resistance and stable performance under typical shop‑floor use. Is the item supplied as a single piece or in sets? This entry refers to a single test pin supplied individually for flexible use in custom gauge arrangements and inspections. Can the pin be used with existing gauge sets and fixtures? Yes; the pin’s nominal diameter and compact length make it compatible with common locating bushes, fixture pockets and comparator set‑ups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.82mm Gauge Pin, Single, 50mm Length, Special Steel, Workshop Version - Metav IndustryLine
Take advantage of precise fit control and workshop-ready robustness: the combination of high repeatability (±0.002 mm) and durable special steel supports consistent inspection routines and minimal rejects. Order directly via Metav Werkzeuge or consult our specialists for batch requirements. Gauge pin M323.D82 — single precision pin, 13.82 mm diameter, 50 mm length (Metav IndustryLine) A single gauge pin designed for dimensional verification and go/no‑go fit checks in workshop and production environments, offering tight tolerance and a compact 50 mm length for deep-seat inspections Workshop-grade single gauge pin 13.82 mm Length 50 mm for deep-seat checks Tolerance ±0.002 mm for tight fits Made from special steel for durability Consistent fit control for production and inspection A compact inspection pin made to secure reproducible fit checks and minimise rework. The 13.82 mm diameter is held to a tolerance of ±0.002 mm, which reduces uncertainty in go/no‑go assessments and supports repeatable quality gates on assembly lines. The tight specification helps to detect marginal clearances early, improving first-pass yield and reducing downstream corrective work. The design is optimised for rapid staging in jigs and fixtures, enabling efficient throughput without compromising measurement integrity. Durable workshop design that endures daily use Built in a workshop-grade execution and manufactured from special steel, this single pin resists wear under frequent handling and contact with mating parts. The 50 mm length provides access for recessed bore checks while keeping the tool manageable for one-handed operation at the bench. Surface finishing and material selection focus on long service life, so change‑out intervals are extended and tooling costs per part are lowered. The robust construction also means fewer replacements, supporting a steadier production rhythm. Practical applications and traceable precision Ideal for dimensional spot checks, fixture validation and gauging benches, the pin suits both small-scale inspection tasks and regular in‑process controls. Marked and traceable as part number M323.D82, the component integrates easily into existing inspection workflows and documentation. Its repeatability supports statistical process control routines and helps to verify tool wear or part deformation. For procurement and logistics, the GTIN is provided for unambiguous stock handling and batch tracking. Contact Metav Werkzeuge for delivery options and technical advice on using the Metav IndustryLine gauge pin M323.D82 in series inspection setups — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.D82 GTIN: 4061905066702 Manufacturer: Metav IndustryLine Material: Special steel Length: 50 mm Diameter: 13.82 mm Tolerance: ±0.002 mm Weight: 0.1 kg SKU: M323.D82 Core measurements Diameter (nominal): 13.82 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Single gauge pin for fit checks Traceable article number M323.D82 Delivered as a single unit FAQ What tasks is this gauge pin best suited for? The gauge pin M323.D82 is intended for dimensional verification, go/no‑go checks and fixture validation where a 13.82 mm diameter reference is required; it is particularly useful for deep‑seat bore inspections thanks to its 50 mm length. How precise is the inspection using this pin? Precision is specified at ±0.002 mm, which makes the pin appropriate for tight fit assessments and repeatable in‑process checks within workshop and light production environments. What material is used and how does that affect durability? Manufactured from special steel, the pin offers enhanced wear resistance for frequent use; the material choice supports longer service life under normal workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.83mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Reliable end-measure control with a precise 13.83 mm diameter, a tight ±0.002 mm tolerance and a robust special steel body — order this test pin directly via Metav Werkzeuge or consult our specialists if further application guidance is required. Test pin (single) 13.83 mm Ø, 50 mm length — Metav IndustryLine The Test pin (single) 13.83 mm Ø, 50 mm length is a workshop-grade end-measure pin designed for precise dimensional checks on small components and assembly fixtures. Workshop-grade construction Diameter precision ±0.002 mm Special steel for wear resistance 50 mm overall length Repeatable results for end measurements The compact probe delivers consistent results thanks to its defined 13.83 mm diameter and industrial tolerance of ±0.002 mm, which together support reliable go/no‑go checks and comparative gauging. In routine inspection tasks the dimensional certainty reduces rework and machine downtime, providing measurable process benefits. The design is aimed at tasks that demand tight repeatability rather than broad-range versatility. Robust build for shopfloor use Manufactured from special steel, the pin resists wear during frequent engagement with mating parts and retains dimensional stability under typical workshop conditions. The 50 mm overall length offers sufficient reach for many fixture and end‑face checks while remaining easy to handle and store. The workshop execution emphasises durability and straightforward maintenance for continuous use in production environments. Compact size tailored for micro applications With a measuring range fixed at 13.83 mm, this pin falls into the micro category of precision gauges, making it suitable for fine mechanical work where space and stiffness matter. That compact footprint benefits precision tasks such as end‑face verification on small shafts, insert checks or final control of turned components, where long gauges would compromise stability. Practical handling and traceable identification The single‑piece construction keeps the geometry simple and repeatable; labelling and a clear SKU ensure traceability through inventory and quality records. The test pin is offered as a clear option for workshops that require a simple, precise reference for end measurements and small‑part inspection. Confidence in repeatable measurement contributes directly to reliable production output and fewer rejects. For application advice or to specify the Test pin M323.D83 for a particular inspection routine, contact Metav Werkzeuge for expert guidance and fast supply. Technical data SKU: M323.D83 GTIN: 4061905066719 Brand: Metav IndustryLine Facts Diameter: 13.83 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: special steel Category: Test pins Intended use: end measurements FAQ Is the diameter of the pin guaranteed to 13.83 mm? The diameter is specified as 13.83 mm with a manufacturing tolerance of ±0.002 mm, allowing precise end‑measurement checks with repeatable results. What applications suit this test pin? This single test pin is ideal for micro‑scale end measurements, small shaft verification and final inspection of turned components where a compact, rigid reference is required. Can the pin be used in automated fixtures? Yes, the pin’s defined diameter and robust material make it suitable as a fixed reference in assembly or checking fixtures; verify fixture mounting and alignment for best repeatability. Is the material corrosion resistant? The pin is made from special steel chosen for wear resistance; for corrosive environments, additional surface protection or a corrosion‑resistant specification should be considered. How is the test pin identified in stock and documentation? The item is listed under SKU M323.D83 and GTIN 4061905066719 for clear traceability in quality records and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.84mm Test Pin, 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Compact combination of precision and robustness: the single gauge pin Ø13.84 mm, 50 mm length delivers tight tolerances and workshop‑ready durability with an accuracy of ±0.002 mm. Benefit from reproducible end‑measure checks and reduced rework rates; order the part directly via Metav Werkzeuge or consult the Emmerich team for application advice. Gauge pin, single, Ø13.84 mm, 50 mm — Metav IndustryLine A single gauge pin Ø13.84 mm, 50 mm length engineered for precise end‑measurement checks and routine inspection tasks in workshop environments. Workshop execution Diameter Ø13.84 mm for precise fit High precision ±0.002 mm Precision that keeps inspection reliable This compact measuring element is built to deliver consistent results in serial checks and setup procedures. With an indicated accuracy of ±0.002 mm, the pin supports repeatable end‑measure verification and minimises uncertainty in go/no‑go comparisons. The combination of tight tolerance and a defined Ø13.84 mm diameter helps stabilise fit in fixtures and gauges, translating into fewer adjustment cycles and a steadier production flow. Robust construction for everyday workshop use Manufactured from special steel, the component resists wear and maintains geometry under frequent handling. The 50 mm length provides enough engagement for stable contact while remaining compact for tight assemblies; its low mass (approximately 0.1 kg) eases handling and reduces the risk of accidental deflection during manual placement. Classified within the micro range of measuring tools, this item is especially suited to fine mechanical work where space is limited but accuracy remains critical. Practical application and process benefits Designed for use in end‑measurement tasks and small‑part inspection, the pin integrates smoothly into existing inspection routines and fixture setups. As a single measuring element it is flexible for spot checks, incoming part verification or as a reference in bespoke test jigs. The workshop‑grade execution supports long service intervals, lowering downtime for replacements. For tailored application tips or compatibility checks, the Metav Werkzeuge specialists can advise on fixture integration and handling best practice. Contact Metav Werkzeuge today for advice on application and delivery of the Metav IndustryLine gauge pin M323.D84 to ensure the correct end‑measurement solution for the workshop. Technical Data Article number: M323.D84 GTIN: 4061905066726 ECLASS: 21170231 Label: Gauge pin, single, Ø13.84 mm, 50 mm Facts Diameter: 13.84 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Messbereich max: 13.84 mm Special features Workshop execution Material: Special steel Category: Gauge pins (Messstifte) Intended use: End‑measure checks FAQ What tolerance can be expected from this gauge pin? The gauge pin (Metav IndustryLine M323.D84) is specified with an accuracy of ±0.002 mm, suitable for precise end‑measurement and repeatable inspection tasks. What material is used and how durable is it? This Metav IndustryLine test pin is made from special steel, providing robust wear resistance for routine workshop use while keeping dimensional stability over time. For which measuring range is the pin suitable? With a diameter of 13.84 mm and a compact 50 mm length, the pin falls into the micro measuring category (10–100 mm), making it ideal for fine mechanical components and confined inspection setups. Can the pin be used in fixture or jig applications? Yes. The single gauge pin is designed for integration into fixtures and jigs for end‑measure verification and spot checks; Metav Werkzeuge can advise on fixture compatibility for specific applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.85mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop-grade gauge pin that combines a precisely ground diameter of 13.85 mm with a stable 50 mm length and a tolerance of ±0.002 mm for repeatable end-measure checks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application-specific recommendations and supply options. Gauge pin, single — 13.85 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single, 13.85 mm, length 50 mm is a workshop‑grade precision pin for end‑measure verification and fixture alignment in metalworking and inspection environments Diameter 13.85 mm precision Length 50 mm workshop pin Tolerance ±0.002 mm high accuracy Made from special steel Precision where it matters This single‑piece gauge pin is manufactured for reproducible dimension checks: a nominal diameter of 13.85 mm and a measured length of 50 mm provide a stable reference for bore and component end‑dimension verification. The specified tolerance of ±0.002 mm signals a high‑precision tool suited to close‑tolerance inspection tasks and in‑process checks. In practice, that level of accuracy reduces measurement uncertainty and supports consistent assembly and setup procedures, making it an efficient part of quality control routines. Robust workshop design for reliable handling Designed as a workshop edition, the pin is produced from special steel to ensure a hard, wear‑resistant contact surface under regular use. The compact geometry and modest mass contribute to easy handling during quick go/no‑go checks or when assembling pin stacks and test fixtures. The construction suits repetitive operations common in machining and maintenance environments, where physical robustness and stable reference geometry are decisive for long‑term repeatability. Practical integration and traceable identification As a single gauge element, the pin integrates smoothly into test benches, alignment procedures and dimensional sampling plans; it functions as a fixed standard for end measurements and setting tasks. The product is supplied with a clear SKU (M323.D85) and GTIN for traceability and stock control, simplifying inventory management for production or metrology departments. Use this pin to support standardised routines that reduce setup time and improve process stability. For dependable end‑measurement references, request the Metav IndustryLine gauge pin M323.D85 from Metav Werkzeuge — technical advice and order processing are available from Metav Werkzeuge to match the tool to application needs Technical Data Article number: M323.D85 GTIN: 4061905066733 Manufacturer: Metav IndustryLine Facts Diameter: 13.85 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop edition Category: Gauge pins FAQ What is this pin best used for in a workshop environment? The gauge pin M323.D85 (Metav IndustryLine gauge pin) is ideal for end‑dimension checks, fixture alignment and sampling tasks where a precise reference diameter and length improve setup repeatability. How precise is the diameter and what does the tolerance mean? The diameter is 13.85 mm with a tolerance of ±0.002 mm; this means the pin provides a high‑accuracy reference that helps reduce measurement uncertainty in close‑tolerance inspections. Which materials is the pin suited to check or set up for? As a reference standard, the pin is material‑agnostic in application; it is used to verify dimensions of components made from metals and assemblies where a fixed external reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.86mm Test Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Accurate hole inspection and straightforward pass/fail checks are achieved by the combination of tight dimensional tolerance and robust special-steel construction; order the pin directly via Metav Werkzeuge or consult their advisors for matching sets and accessories. Gauge pin, 13.86 mm (length 50 mm) — Metav IndustryLine, workshop version The gauge pin, 13.86 mm (length 50 mm) is a hardened inspection pin for precise verification of bore diameters and reference measurements in production and quality control. Workshop-grade design for shop use Special steel for robust wear resistance Tolerance ±0.002 mm for precise inspection 50 mm length for deeper hole checks Ensure reliable pass/fail inspection with micrometric accuracy A single inspection pin like this provides a clear, repeatable criterion for bore acceptance. The ±0.002 mm dimensional tolerance minimises measurement uncertainty, enabling faster decision-making on the production line and reducing rework. Used as a go/no-go reference or as a master for comparative checks, the pin shortens inspection cycles while preserving traceability and reproducibility. Built for the workshop: durability and simple handling Designed as a workshop execution, the pin combines a compact geometry with a special steel composition that resists wear under frequent use. The 50 mm length offers access to deeper bores without sacrificing stiffness. Supplied as a single unit in a protective transport case, this tool is ready for everyday shop-floor use and robust enough to withstand handling during fixture setup and routine inspections. Practical application and integration into inspection routines This precision inspection pin is ideal for quick verification of internal diameters, alignment checks and positioning aids in jigs and fixtures. The compact mass (approx. 0.1 kg) and standardised diameter of 13.86 mm make it compatible with common pin holders and comparator fixtures. For flexibility, it can be combined with other pins or sets to form a custom reference kit tailored to specific production tolerances. Choose the Metav IndustryLine gauge pin via Metav Werkzeuge for dependable shop-floor inspection — contact Metav Werkzeuge for help selecting complementary sizes and securing consistent measuring routines Technical data Article number: M323.D86 GTIN: 4061905066740 Label: Gauge pin, single, 13.86 mm, length 50 mm Facts Diameter: 13.86 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: Special steel Workshop execution Supplied in a protective plastic or wooden case for transport FAQ What tolerance does the gauge pin offer? The pin is specified with a tolerance of ±0.002 mm for high-precision inspection tasks and dimensional verification. Is this pin suitable for shop-floor inspections? Yes — the workshop-grade design and special-steel construction make the pin suitable for regular use on the production floor. Can the pin be used for deeper bores and stepped holes? The 50 mm length is intended for deeper bore checks and can assist in stepped-bore verification when used with appropriate fixturing. Is a calibration certificate supplied with the product? A calibration certificate is not specified in the provided product data for this item. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.87mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combine workshop-grade durability, a precise 13.87 mm diameter and a tight tolerance of ±0.002 mm for reliable end‑dimension checks; order this gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 13.87 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single — 13.87 mm Ø, 50 mm length is a workshop-grade inspection pin intended for accurate end‑size verification and repeatable fit testing in production and quality control environments Precision tolerance ±0.002 mm Exact 13.87 mm diameter for end‑dimension checks 50 mm length in special steel for workshop use Supplied in a transport case for safe handling Industry-grade precision for repeatable measurements The inspection pin delivers high repeatability through its tight nominal tolerance of ±0.002 mm, making it suitable where small deviations affect assembly or sealing performance. By pairing a defined nominal diameter with a compact 50 mm shank, the component simplifies end‑dimension verification and go/no‑go comparisons on fixtures and gauges. The close tolerance reduces measurement uncertainty during frequent checks and supports faster decision cycles on the shop floor, translating technical specification into measurable production reliability. Robust construction and practical handling in the workshop Manufactured from special steel and finished for routine use, this single gauge pin balances durability with manageable handling. The 50 mm length provides sufficient engagement for stable seating in bores or reference fixtures while remaining short enough to limit bending or misalignment during manual positioning. Supplied in a transport case, the pin is protected against handling damage and contamination, which helps to preserve the calibrated form and extends service life in busy environments where tools are moved between workstations. Where this inspection pin adds measurable value Use this plug‑style inspection pin for end‑size control, assembly verification, and template checking where a precise, non‑complex reference is required. The 13.87 mm nominal diameter is well suited to tasks such as bore go/no‑go checks, gauge setting and comparative fits against mating parts. Because the design is single and uncluttered, the pin integrates smoothly into fixture arrays, test benches and manual inspection routines, allowing technicians to speed up throughput without compromising on traceability of measurement outcomes. Practical details for procurement and workshop integration The item is delivered ready for use in a protective transport case and is traceable via its SKU and GTIN for stock management and reorder planning. Lightweight at approximately 0.1 kg, it is easy to handle during repeated checks and quick sampling. The workshop configuration emphasises serviceability and daily reliability rather than laboratory‑only performance, making it a pragmatic choice for maintenance shops, small series production and quality departments that require consistent end‑dimension references. For precision checks with Metav IndustryLine quality—contact Metav Werkzeuge in Emmerich for supply and technical guidance on integrating the 13.87 mm gauge pin into existing inspection routines Technical data SKU: M323.D87 GTIN: 4061905066757 Label: Prüfstift, einzeln, 13,87 mm Länge 50 mm Brand: Metav IndustryLine Material: Special steel Weight: 0.1 kg Length: 50 mm Diameter: 13.87 mm Tolerance: ±0.002 mm Facts Diameter: 13.87 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm GTIN: 4061905066757 Special features Workshop version Special steel construction Supplied in a transport case Category: gauge pins Single, plain inspection pin design FAQ What are the exact dimensions and tolerance of this gauge pin? The gauge pin has a diameter of 13.87 mm, a length of 50 mm, and a tolerance of ±0.002 mm. What material is used for the inspection pin? The Metav IndustryLine inspection pin is made from special steel, specified for workshop durability and routine use. Is the pin suitable for repeated end‑dimension checks in production? Yes, the 13.87 mm gauge pin is designed for repetitive end‑size verification and fixture checking in workshop and production environments. How is the item delivered to protect the precision surface? The gauge pin is supplied in a transport case to protect the finished surface during handling and storage. What identifier should be used for stock control and reorders? Use SKU M323.D87 and GTIN 4061905066757 for inventory and procurement processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.88mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Taking advantage of high concentric accuracy and robust construction ensures reliable go/no‑go checks and long service life; combine ±0.002 mm tolerance with the compact 13.88 mm diameter and order directly via Metav Werkzeuge or consult the specialists for application advice. Gauge pin, 13.88 mm — Single test pin, 50 mm length (Metav IndustryLine) The gauge pin, 13.88 mm is a single precision test pin designed for end‑measure checks, alignment tasks and workshop inspection where compact, repeatable gauging is required. Diameter 13.88 mm for precise fit Length 50 mm workshop version Tolerance ±0.002 mm high repeatability Made from special steel for durability Reliable fits through tight tolerances The compact measuring pin provides a 13.88 mm nominal diameter with a verified ±0.002 mm geometric tolerance, enabling high repeatability in pass/fail checks and controlled assembly trials. For fixtures and plug‑gauges the controlled diameter reduces uncertainty during changeover and minimises rework, while the tight tolerance supports interchangeability between measuring points and production batches. Robust construction for workshop environments Manufactured in Special steel and offered in a workshop version, the pin is hardened and finished for wear resistance under frequent handling. The 50 mm length gives a stable engagement depth for typical end‑measure applications while remaining compact enough for tight jigs and test stands. The material choice and finish lower surface wear and preserve the nominal diameter across repeated use, extending service intervals. Practical integration in inspection workflows Delivered as a single unit with clear identification, this measuring pin suits spot checks, assembly verification and comparative gauging in production. The light mass aids rapid handling and reduces fixture load; traceable marking assists process documentation and inventory control. When used alongside fixed gauges or modular test blocks the pin streamlines throughput and supports consistent quality decisions on the shop floor. For workshop inspections requiring compact, high‑precision pins from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for specification checks and supply options at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.D88 GTIN: 4061905066764 Manufacturer: Metav IndustryLine Facts Diameter: 13.88 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Delivery: single piece Label: Prüfstift, einzeln, 13,88 mm Länge 50 mm FAQ What materials is the pin suitable for? The gauge pin from Metav IndustryLine is made of special steel and is suited to general workshop inspection tasks and gauging applications where steel pins are appropriate. Is the diameter guaranteed for interchangeability? Yes, the specified 13.88 mm diameter with ±0.002 mm tolerance ensures interchangeability and repeatable fit in modular fixtures and plug‑gauge assemblies. Can the pin be used for alignment and end‑measure checks? The single precision measuring pin (SKU M323.D88) is intended for alignment, end‑measure checks and go/no‑go verification in production and test setups. How is the pin delivered and identified? The product is supplied as a single piece and is identified by SKU M323.D88 and GTIN 4061905066764 to support inventory and traceability. Is this pin suitable for continuous workshop use? The workshop version is finished for durability and frequent handling; the special steel construction supports prolonged service under normal inspection conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.89mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
Combining workshop‑grade robustness with 13.89 mm nominal diameter and a repeatable ±0.002 mm tolerance, this gauge pin ensures reliable end‑dimension checks and alignment in routine inspection tasks; its 50 mm length provides sufficient reach for medium‑depth bores while remaining easy to handle. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.D89 gauge pin — 13.89 mm diameter, 50 mm length (Metav IndustryLine) A M323.D89 gauge pin engineered for precise end‑dimension verification and locating in workshop and production environments. 13.89 mm diameter for precise fit 50 mm overall length for medium‑depth checks ±0.002 mm tolerance for high repeatability Reliable checks for everyday inspection tasks The pin is designed as a workshop‑grade measuring element that balances stiffness and handling for frequent use. With a nominal diameter of 13.89 mm and an overall length of 50 mm, the component fits common bores and locating holes used in jigging and inspection fixtures. The specified ±0.002 mm tolerance supports consistent go/no‑go evaluations and reduces rework by providing clear, measurable pass criteria. This makes the pin suitable for batch control in maintenance work and small series production where reproducibility is essential. Material choice and handling benefit accuracy Manufactured from special steel, the pin resists everyday wear while maintaining dimensional stability under normal workshop conditions. The material selection contributes to a smooth surface finish and predictable contact behaviour, which in turn preserves the measured tolerance over repeated cycles. The compact length keeps the pin rigid during insertion, lowering the risk of bending‑induced error and simplifying manual probing tasks. Together, these attributes reduce measurement noise and help technicians obtain usable data quickly. Practical integration into inspection workflows As a single‑piece gauge pin, the item integrates easily into existing master‑pin sets, plug gauges, or alignment routines. Its standard nominal size and clear marking enable rapid identification on the shop bench, while the robust finish minimises the need for frequent replacement. For shops that prioritise uptime, the combination of repeatable accuracy and straightforward handling shortens inspection time per component and supports a more efficient quality assurance cycle. For sample requests, technical clarification or batch supply options for the Metav IndustryLine M323.D89 gauge pin, contact Metav Werkzeuge in Emmerich by phone or email for prompt advice and delivery coordination Technical data Article number: M323.D89 GTIN: 4061905067556 Manufacturer: Metav IndustryLine Facts Diameter: 13.89 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Single gauge pin Suitable for end‑dimension and alignment checks FAQ What tolerances can be expected from the M323.D89 gauge pin? The M323.D89 gauge pin is specified with a ±0.002 mm tolerance, providing high repeatability for routine workshop inspections. Is the pin suitable for locating and alignment in fixtures? Yes, the 13.89 mm diameter and 50 mm length make the pin well suited for locating, alignment and end‑dimension verification in fixtures and jigs. Which material is used for this gauge pin and why does it matter? The pin is made from special steel, chosen for wear resistance and dimensional stability to ensure consistent measurement performance over time. Can the gauge pin be used as a replacement in existing master pin sets? The single‑piece design and standard nominal diameter allow straightforward substitution in master sets and alignment routines where a 13.89 mm pin is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com