Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
0.5–20 mm Gauge Pin Set 40 Pieces, 0.5 mm Steps, With Probe Holder, Plastic Case - Metav IndustryLine
Take advantage of precise manufacturing tolerance of ±0.004 mm and a comprehensive size range from 0.5–20.0 mm with 0.5 mm steps for reliable inspection and quick assembly control; the set’s pin holder and transport case keep tooling organised and ready for production checks. Order the gauge pin set directly via Metav Werkzeuge or consult our specialists for a recommendation. Gauge pin set 0.5–20.0 mm (40 pcs) — Precision gauge pins with pin holder | Metav IndustryLine The gauge pin set 0.5–20.0 mm (40 pcs) is a compact inspection kit for workshop and inspection bench use, designed for rapid dimensional checks and reference standards across general machining and quality control tasks Gauge pin set 0.5–20.0 mm, 0.5 mm increments 40 precision pins in special steel Supplied in a protective transport case Includes pin holder for secure handling Reliable precision that speeds up inspection The set delivers consistent measurement performance across a practical range from 0.5–20.0 mm, making it suitable for checking bores, plug gauges and internal recesses without the need for time‑consuming setup. The pins are manufactured with a stated accuracy of ±0.004 mm, which reduces uncertainty in pass/fail assessments and supports clear quality decisions. Using a complete set in 0.5 mm steps avoids interim gauges and speeds up the inspection loop, which in turn improves throughput and lowers the cost per check. Robust design for workshop conditions Constructed from special steel, the pins combine wear resistance with stable geometry for repeated use in production environments. The inclusion of a dedicated pin holder simplifies handling and reduces the risk of dropping or mixing pins during transfer between machine and inspection bench. Supplied in a transport case, the kit remains organised and protected during storage and movement, ensuring that the set is ready for immediate use when a measurement task arises. Clear advantages for everyday metrology Having a complete set in one kit eliminates guesswork when determining the correct gauge and supports faster process control. The 0.5 mm gradation presents a practical compromise between resolution and coverage, so fewer tool changes are required compared with single‑size gauges. The compact kit format and the 40 pins weigh about 0.7 kg, which makes it straightforward to handle on the shop floor and reduces downtime between checks. How the set supports quality assurance workflows As a workshop reference, this kit is useful for quick go/no‑go verifications, setup checks, and as a complement to external micrometres or plug gauge systems. The simple, standardised increments and robust construction support repeatable outcomes, which help maintain stable process capability. The presence of clearly defined size steps and a secure holder also improves traceability of measurement routines during audits and tool changeovers. For a tailored recommendation or delivery from Metav IndustryLine, contact Metav Werkzeuge to discuss how this gauge pin set fits into current inspection routines and to arrange swift dispatch from Emmerich Technical data Article number: M318.521 GTIN: 4054469129143 eClass: 21170231 Tariff number: 90173000 Set: 40 pins Facts Measurement range: 0.5–20.0 mm Increment: 0.5 mm Accuracy: ±0.004 mm Weight: 0.7 kg Pin length: 50 mm Special features Material: special steel Supplied in transport case Includes pin holder Set configuration: 40 pieces Workshop version for general inspection tasks FAQ Which sizes are included in the set? The gauge pin set 0.5–20.0 mm (40 pcs) contains pins from 0.5 mm up to 20.0 mm in 0.5 mm increments. What is the stated accuracy of the pins? The pins are manufactured to a tolerance of ±0.004 mm, providing a reliable reference for routine inspection and go/no‑go checks. What material are the pins made from and is it suitable for workshop use? The pins are made from special steel; the material and finish are chosen for durability and consistent geometry in workshop environments. Is a holder or case supplied for transport and organisation? Yes, the set is supplied in a protective transport case and includes a pin holder for secure handling and organised storage. Can this set be used for internal dimension checks and reference measurements? Yes, the set is suitable for internal checks, reference standards in setup operations and quick verification tasks on the shop floor. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.61mm Gauge Pin Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of high‑precision measurement (±0.001 mm), compact 0.61 mm diameter and robust 50 mm length for reliable end measurements; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.061 — single 0.61 mm gauge pin, ±0.001 mm accuracy (Metav IndustryLine) The Gauge pin M323.061 is a single, workshop‑grade precision plug designed for exact end measurements and go/no‑go checks in quality control and final inspection. Single gauge pin 0.61 mm, tolerance ±0.001 mm Length 50 mm for precise end measurements Workshop version in special steel construction Supplied individually with traceable GTIN Reliable precision for critical end measurements Manufactured with an accuracy of ±0.001 mm, this gauge pin delivers high‑precision dimensional control where tolerances are tight. The 0.61 mm diameter and 50 mm working length are optimised for reproducible end‑face and bore verification; using a defined, calibrated reference pin minimises subjective measurement error and reduces rework in production. In statistical process control, a stable master gauge like this reduces measurement scatter and supports consistent conformity assessments. Robust workshop design for frequent use The workshop edition is made from special steel, offering mechanical stability and surface integrity under regular handling. The compact geometry and slim profile ensure fast access into narrow bores and mating features while the material choice preserves roundness and wear resistance over repeated cycles. These attributes translate into fewer replacements, less machine downtime and dependable nominal checks during routine inspection tasks. Traceability and simple inventory integration Each unit carries a GTIN and clear SKU identification to simplify stock management and traceability through the quality system. Delivered as an individual item, the gauge pin integrates easily into existing gauge sets or inspection kits and allows straightforward substitution in documented measurement procedures. Clear labelling and consistent dimensional performance support auditability and help maintain documented measurement chains. Contact Metav Werkzeuge today to specify the M323.061 gauge pin for precise end‑measurement tasks or to request tailored application advice from our consultants Technical data SKU: M323.061 GTIN: 4061905054143 Label: Gauge pin, single, 0.61 mm, ±0.001 mm, length 50 mm ECLASS: 21170231 Numbers / Core technical data Diameter: 0.61 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.003 kg Special features / Versions Workshop version Material: Special steel Single item delivery Story trigger: end measurements FAQ What level of accuracy does this plug gauge deliver? The Gauge pin M323.061 is specified with an accuracy of ±0.001 mm, providing micrometre‑class repeatability for end‑face and bore checks. For which inspection tasks is a 0.61 mm gauge pin suitable? A 0.61 mm diameter pin is suitable for precise end measurements, small bore verification and final inspection tasks where very small diameters must be checked for conformity. Is the M323.061 supplied as a single item or in sets? The M323.061 is supplied individually, allowing flexible integration into existing gauge sets or bespoke inspection kits. What is the construction material and why does it matter? The pin is made from special steel, chosen for mechanical stability and resistance to wear; this preserves dimensional integrity during regular workshop use. How is this gauge pin identified for traceability? The product is identified by SKU M323.061 and GTIN 4061905054143 to support inventory control and quality documentation Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.62 mm Test Pin Length 50 mm ±0.001 mm Workshop Version - Metav IndustryLine
The combination of workshop‑grade construction, ±0.001 mm tolerance and a compact 50 mm length ensures reproducible end‑dimension checks and reliable fit verification. Order the gauge pin directly via Metav Werkzeuge or consult the specialists for application advice. M323.062 Gauge pin (single) — 0.62 mm diameter, ±0.001 mm, 50 mm length M323.062 Gauge pin (single) is a precision measuring pin designed for end‑dimension verification and go/no‑go fit checks in workshop and quality‑control environments. Workshop version, robust design 0.62 mm diameter, ±0.001 mm accuracy 50 mm length for deep bore checks Supplied in transport case for safe storage High precision for reliable tolerance control The gauge pin provides a ±0.001 mm tolerance that supports high‑precision inspection steps where repeatability matters. Expressed practically, this degree of accuracy keeps dimensional uncertainty at the micrometre scale and therefore reduces the risk of scrap or rework in serial production. The narrow 0.62 mm diameter is ideal for small bores and detailed end‑dimension checks, while the solid construction maintains concentricity and contact stability during measurement tasks. This level of control is particularly relevant for final inspection routines and for setting up gauging fixtures where tight clearances are common. Durable workshop design for everyday metrology use Built as a workshop version, the pin is made from special steel selected for wear resistance and dimensional stability under routine handling. The 50 mm shaft length enables checks in deeper seats and retention bores without compromising axial stiffness. A protective transport case is provided to limit handling damage and preserve the measuring surface between uses. These mechanical choices translate into lower maintenance effort and longer service life, so inspection routines remain dependable even under frequent use in a production environment. Practical application and integration in inspection workflows The single gauge pin is suitable for end‑dimension and fit verification in component inspection, fixture checking and tool setting. As a compact dimensional standard, the pin can be used directly in bore checks, paired with micrometres or dial indicators, or integrated into small jigs as a reference dowel. Traceability is supported by the clear labelling and SKU, enabling straightforward inventory control for quality teams. Where interchangeability and narrow tolerances are required, this pin serves as a simple, reproducible reference that complements existing metrology equipment. For tailored advice or to arrange supply of the M323.062 gauge pin, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com to discuss application specifics and delivery options Technical data Article number: M323.062 GTIN: 4061905055034 Category: Gauge pins (Messstifte) Brand: Metav IndustryLine Facts Diameter: 0.62 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: Special steel Workshop version Supplied in transport case Single gauge pin for end‑dimension checks FAQ What level of accuracy does this gauge pin provide? The M323.062 gauge pin is specified with a tolerance of ±0.001 mm, which is suitable for high‑precision end‑dimension and fit checks in workshop inspection tasks. What materials is the pin made from and how does that affect use? The pin is made of special steel, chosen for wear resistance and dimensional stability; this makes it suitable as a durable reference for metallic components and repeat inspection cycles. Is a calibration certificate supplied with this gauge pin? No calibration certificate is specified for the M323.062 in the product data. Calibration options can be discussed with Metav Werkzeuge where traceable verification is required. What is included in the delivery? Delivery comprises a single gauge pin in a protective transport case to keep the measuring surface secure during storage and transport. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.63mm Gauge Pin Single ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of workshop-grade construction, ±0.001 mm tolerance and a compact 50 mm length for reliable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.063 gauge pin — 0.63 mm, ±0.001 mm, 50 mm (Metav IndustryLine) A M323.063 gauge pin designed for precise end‑measure checks and small‑bore verification in workshop and inspection settings. Workshop-grade design Diameter 0.63 mm precision Tolerance ±0.001 mm Delivered in transport case High‑precision performance for repeatable checks The compact design delivers measurable benefits where fine tolerances matter: a nominal diameter of 0.63 mm combined with a verified ±0.001 mm tolerance ensures exceptionally consistent contact during plug‑style measurements. As a hardened gauge element, the component provides excellent repeatability for short‑run verification and go/no‑go fits. The small form factor reduces thermal and bending influences, helping to maintain measurement integrity in routine workshop environments. Robust construction tuned to everyday use Made from special steel, the pin is produced in a workshop‑grade execution that tolerates handling without sacrificing dimensional stability. The 50 mm length offers an effective grip and adequate engagement for most small‑bore checks while keeping the element easy to mount in fixtures or test rigs. Supplied in a transport case, the pin stays protected in transit and on the bench, reducing the risk of damage that could impair accuracy. Practical applications across metrology and assembly Ideal for end‑measures, alignment, fixture set‑up and small‑bore verification, this gauge element suits inspection benches, assembly jigs and toolrooms that require compact, high‑accuracy reference pieces. The low mass supports quick manual positioning and limits inertial effects during tactile gauging. When integrated into comparative checks or simple plug gauges, the component serves as a reliable reference that helps shorten inspection cycles and raises confidence in pass/fail decisions. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge to request the M323.063 gauge pin or to discuss compatible reference sets with our consultants at Metav Werkzeuge. Technical data Article number: M323.063 GTIN: 4061905055041 SKU: M323.063 Facts Diameter: 0.63 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: special steel Workshop execution Supplied in protective transport case Accuracy class: ±0.001 mm FAQ What measurement tasks is this pin best suited for? The M323.063 gauge pin is optimised for end‑measure checks, small‑bore verification and fixture alignment tasks where a 0.63 mm reference with ±0.001 mm tolerance is required. Can the pin be used in inspection jigs and plug gauges? Yes, the Metav IndustryLine gauge pin is intended for integration into jigs and plug‑type gauging where compact, high‑precision elements are needed. How robust is the surface and material under regular handling? Constructed from special steel and issued in a workshop version, the pin tolerates normal workshop handling while maintaining dimensional stability. Is the pin suitable for comparative or tactile gauging? The low mass and compact length make the pin suitable for tactile comparators and quick comparative checks on the inspection bench. What protection is provided for transport and storage? The gauge pin is supplied in a protective transport case to reduce the chance of damage during transport and bench storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.64mm Gauge Pin, Workshop Version, ±0.001mm, 50mm Length - Metav IndustryLine
The combination of ±0.001 mm tolerance, a 0.64 mm diameter and robust workshop design ensures reliable reference measurements and long-term repeatability; order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.064 – single 0.64 mm, ±0.001 mm | Metav IndustryLine The gauge pin M323.064 is a single inspection pin designed for precise diameter checks and end-measurements in workshop and inspection environments. Diameter 0.64 mm precision pin Tolerance ±0.001 mm accuracy 50 mm length, special steel Workshop version, supplied in case Precision where form and fit matter The small-diameter inspection pin offers sub-micron-level control over fit and clearance checks in assemblies. With a stated tolerance of ±0.001 mm, the pin functions as a traceable reference for go/no-go checks and verification tasks in manufacturing and quality control. Its compact geometry and slender profile make it particularly suited for measuring small bores, alignment points and end faces where a conventional gauge would be too large. The 0.64 mm diameter and 50 mm length provide a balance between accessibility and handling stability, while the high tolerance reduces uncertainty during repeated use. Built for repeatable workshop use Constructed from special steel, this workshop-grade pin resists wear under frequent contact and retains dimensional integrity for longer intervals between inspections. The robust finish and material choice deliver consistent contact conditions that support repeatable readings and minimise the need for frequent replacement. Supplied in a protective case for safe transport, the pin is ready for routine inclusion in inspection kits or mobile measurement sets, helping to keep downtime low and inspection cycles efficient. Practical integration into measurement workflows As a single gauge pin, the component serves as a precise datum for manual verification and can be used alongside optical comparators, height gauges and pin gauges for comparative checks. Its lightweight construction and compact dimensions make handling straightforward during repetitive checking operations; the pin’s geometry is compatible with standard fixture setups for quick positioning. When documented inspection traces are required, the pin’s stable characteristics support clear pass/fail criteria and assist in process validation and production control. For tailored advice on integrating the M323.064 gauge pin into existing inspection routines, contact Metav Werkzeuge for technical guidance and local supply options. Technical Data SKU: M323.064 GTIN: 4061905055058 Label: Gauge pin, single, 0.64 mm, ±0.001 mm, length 50 mm Category: Gauge pins Measurements Diameter: 0.64 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Materials & Features Material: special steel Workshop design Supplied in protective transport case Manufacturing brand: Metav IndustryLine FAQ What tolerance does this gauge pin offer? The M323.064 gauge pin is manufactured to a tolerance of ±0.001 mm, making it suitable for high-precision diameter checks. Can the pin be used for small-bore measurements? Yes, the 0.64 mm diameter and 50 mm length make the pin appropriate for small-bore and end-face inspections in workshop environments. Is the gauge pin durable for regular use? Constructed from special steel and supplied in a protective case, the pin is designed for routine workshop handling and repeatable checks. How does the M323.064 fit into a measurement workflow? The gauge pin serves as a reference for go/no-go checks, comparative verification with height gauges or optical systems, and for validating fit and clearance in assemblies. Which brand manufactures this inspection pin? The component is offered under the Metav IndustryLine brand and delivered as a workshop-grade inspection pin, SKU M323.064. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.65mm Gauge Pin Length 50mm ±0.001mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a compact inspection solution that combines 0.65 mm nominal diameter, ±0.001 mm tolerance and a 50 mm working length for reproducible end‑measurement checks; order directly via Metav Werkzeuge or consult the team for application advice. M323.065 Gauge Pin — 0.65 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.065 gauge pin is a precision inspection pin designed for fine end‑measurement and bore verification in workshop environments. Precise ±0.001 mm tolerance Compact 0.65 mm diameter for micro bores 50 mm length for deeper access Workshop execution with special steel Precision where microns matter The small nominal diameter and tight tolerance deliver repeatable measurement results for critical quality checks. With a declared accuracy of ±0.001 mm, this inspection pin is suitable for dimensional verifications where small deviations can cause assembly problems or functional failures. The narrow profile supports checks in small bores and tight tolerances, reducing the need for trial‑and‑error adjustments and minimising rework. By translating the technical tolerance into a practical benefit, the pin ensures that inspection routines become more reliable and efficient in the production flow. Built for practical workshop use Constructed in special steel and supplied as a single, ready‑to‑use pin, this workshop version balances durability with manageable handling. The 50 mm length gives sufficient reach for many common internal checks without compromising stiffness, while the light weight supports rapid manual use across inspection stations. The compact design and resilient material choice keep wear low under typical workshop conditions; this reduces replacement frequency and helps maintain consistent measurement quality over time. The result is a robust tool that integrates well with standard inspection benches and handheld gauges. Clear applications and workflow benefits Designed primarily for end‑measurement tasks and bore verification, the gauge pin assists in fast go/no‑go checks, PID documentation and incoming part controls. The slim profile and high accuracy make it a practical choice for small components, precision turned parts and assembly controls where nominal diameters around 0.65 mm are to be confirmed. Using a dedicated inspection pin simplifies the measurement sequence, shortens cycle times and supports traceable quality processes that feed into larger quality assurance systems. For precise end‑measurement checks with the Metav IndustryLine M323.065 gauge pin, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for suitability advice and ordering Technical Data Article number: M323.065 GTIN: 4061905055065 Manufacturer: Metav IndustryLine Facts Diameter: 0.65 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Materials & Features Material: special steel Workshop execution Single piece delivery Application: end measurement / bore verification FAQ What tolerance does this gauge pin offer and how precise is it? The M323.065 gauge pin from Metav IndustryLine is specified with a tolerance of ±0.001 mm, making it suitable for high‑precision end measurements and fine bore checks. Can the pin be used for internal bore verification on small parts? Yes, the 0.65 mm diameter and 50 mm length of the gauge pin make it well suited to internal bore verification for small turned or machined parts. What material is the gauge pin made from and what does that mean for durability? The pin is made from special steel, which provides a balance of hardness and wear resistance appropriate for workshop inspection tasks in repeated use. Is the product supplied as a single item or in sets? The product is supplied as a single gauge pin; the designation indicates individual delivery for targeted inspection tasks. Which inspection tasks are most appropriate for this type of pin? Use the pin for routine go/no‑go checks, incoming inspection of small components and end‑measurement tasks where a compact, high‑accuracy probe is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.66mm Gauge Pin, Length 50mm, ±0.001mm, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high‑precision ±0.001 mm tolerance, a compact Ø 0.66 mm diameter and resilient special steel construction for repeatable end‑dimension control; order the gauge pin directly via Metav Werkzeuge or ask our consultants for application advice. Gauge pin M323.066 — single gauge pin, Ø 0.66 mm, ±0.001 mm A gauge pin designed for precise end‑dimension checks and plug gaging in workshop and inspection environments. High‑precision ±0.001 mm tolerance Diameter Ø 0.66 mm for fine bores Workshop‑grade 50 mm length Precision where miniature dimensions matter The M323.066 gauge pin delivers exceptionally fine resolution thanks to its ±0.001 mm specification, making it suitable for tasks that demand tight end‑dimension control. The small Ø 0.66 mm shaft is ideal for verifying tiny bore diameters and ensuring component conformity in micro‑mechanical assemblies. Built for repeatability, the narrow diameter minimises clearance error and supports reliable pass/fail evaluations in quality checks. Durable construction for everyday workshop use Manufactured from special steel, this probe provides a balance of hardness and wear resistance that supports frequent handling in a production setting. The 50 mm length offers enough engagement for secure probing while remaining compact for easy handling and positioning. The workshop version implies robustness in finish and tolerances so that routine measurements remain consistent without excessive tool care. Practical benefits for inspection and metrology Designed for end‑dimension verification and plug gaging, the measuring pin reduces setup time in inspection routines and complements standard gauge sets. The compact format helps in accessing confined features, and the tight tolerance reduces measurement uncertainty during comparative checks. Supplied as a single item, the component is straightforward to integrate into existing inspection procedures and tool kits. Contact Metav Werkzeuge for product availability and technical consultation on the Metav IndustryLine gauge pins — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M323.066 GTIN: 4061905055072 Label: Prüfstift, einzeln, 0,66 mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 0.66 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: special steel Single piece delivery Workshop execution Intended for end‑dimension checks Category: gauge pins FAQ What tolerance can be expected from this gauge pin? The gauge pin offers a tolerance of ±0.001 mm, suitable for fine end‑dimension verification and high‑precision plug gaging. Which materials is the pin made from? This measuring pin is manufactured from special steel, chosen for wear resistance and dimensional stability in workshop conditions. Is the pin supplied individually or in sets? The item is supplied as a single gauge pin (M323.066) for flexible integration into inspection workflows. What applications suit a Ø 0.66 mm pin? A diameter of 0.66 mm is aimed at checking small bores, micro‑mechanical parts and detailed end‑dimension control tasks. How does the length affect handling? At 50 mm length the pin offers secure engagement for repeatable measurements while remaining compact for access in confined assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.67 mm Gauge Pin Single, ±0.001 mm Accuracy, 50 mm Length, Workshop Version - Metav IndustryLine
High-precision inspection of micro components is achieved by the combination of 0.67 mm nominal diameter, ±0.001 mm tolerance and a 50 mm working length; order the precision gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Precision gauge pin M323.067 — single micro gauge pin, 0.67 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The Precision gauge pin M323.067 is a single, workshop‑grade inspection pin designed for micro measurement tasks and end‑dimension checks in fine mechanical work and precision engineering. Precision diameter 0.67 mm Tolerance ±0.001 mm 50 mm hardened length Delivered in protective transport case Reliable micro‑measurement where every micron counts This micro‑class gauge pin is engineered for tasks that demand reproducible results at very small diameters. With a nominal diameter of 0.67 mm and a guaranteed ±0.001 mm tolerance, the pin supports high‑accuracy go/no‑go and comparative checks on miniature bores, pins and features. Classified within the micro measurement range, it offers the stiffness and surface quality needed to reduce measurement uncertainty on compact components. The emphasis on measurable performance makes this item particularly suited to inspection processes where traceable, repeatable readings are essential. Robust design and material for workshop conditions Designed as a workshop version, the pin is manufactured from special steel that combines wear resistance with dimensional stability. The 50 mm length provides practical reach for small assemblies while retaining rigidity, and the precision ground finish ensures consistent contact geometry. These attributes reduce the influence of handling and allow integration into existing gauge sets or holding fixtures. The single‑piece construction simplifies handling and minimises sources of fit error during routine checks. Practical handling and application scenarios The pin supports end‑measurement and small‑bore verification in toolrooms, assembly lines and repair benches. Typical applications include component sorting, final inspection of turned parts and validation of mating elements for micro‑mechanical assemblies. Supplied in a protective transport case, the item is easy to store and transport without compromising the ground surface. The compact dimensions and clear specification make the pin compatible with manual gauges, comparator setups and fixture‑based inspection systems used in precision workshops. Why Metav IndustryLine matters for everyday precision Sourcing this component from Metav IndustryLine brings the advantage of a dedicated quality filter located in Emmerich: practical availability of precision parts combined with consistent product oversight. Metav’s approach to democratising precision ensures reliable supply for small and medium‑sized operations as well as specialised industrial users. The result is a dependable inspection aid that supports quality assurance workflows and reduces rework through accurate initial checks. For dependable micro inspection, choose the Metav IndustryLine precision gauge pin and contact Metav Werkzeuge for tailored advice or ordering from Emmerich. Technical data Article number: M323.067 GTIN: 4061905055089 Label: Precision gauge pin, single, 0.67 mm, ±0.001 mm, length 50 mm Brand: Metav IndustryLine Facts Diameter: 0.67 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: special steel Workshop version Delivered in transport case Single probe design FAQ What tolerance is guaranteed for this gauge pin? The precision gauge pin M323.067 is specified with a ±0.001 mm manufacturing tolerance, suitable for high‑accuracy micro inspection. Which applications suit a 0.67 mm pin? This pin is intended for micro‑mechanical checks such as small‑bore verification, end‑dimension control and inspection of miniature turned parts. Is the pin supplied with protective packaging? Yes, the M323.067 is delivered in a protective transport case to preserve the ground finish during storage and transit. What material is used for the pin? The gauge pin is made from special steel in a workshop‑grade finish to provide wear resistance and dimensional stability. Can the pin be integrated into gauge sets or fixtures? The single‑piece design of M323.067 allows straightforward use in manual gauge sets, fixtures and comparator arrangements for routine inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.68 mm Test Pin Single, ±0.001 mm Tolerance, 50 mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine ±0.001 mm tolerance, a 0.68 mm diameter and a compact 50 mm length for reliable end‑measurement tasks; the single‑piece test pin is supplied in a protective transport box for safe handling. Order the test pin directly via Metav Werkzeuge or consult the Metav team for application advice. Test pin M323.068 — single precision probe, 0.68 mm, ±0.001 mm A Test pin M323.068 designed for precision end‑measurements and micro‑gauging in workshops and inspection environments. Precision tolerance ±0.001 mm Diameter 0.68 mm Length 50 mm workshop version Delivered in transport box Accurate small‑diameter gauging for repeatable checks The compact 0.68 mm diameter and ±0.001 mm tolerance make this pin ideal where repeatability and minimal contact area are crucial. As a single‑piece probe, the component reduces measurement uncertainty during end‑dimension verification or comparative checking; the narrow profile allows access to tight bores and fine features while maintaining a stable reference. The combination of fine geometry and consistent tolerance supports faster inspection cycles and fewer rechecks, improving throughput in small‑part production. Robust construction tailored to workshop conditions Manufactured from special steel, the probe combines wear resistance with dimensional stability under routine handling. The workshop execution signifies practical design choices that favour resilience during frequent use: resistance to accidental abrasion, a consistent contact face and a balanced length‑to‑diameter ratio. Supplied in a protective transport box, the item arrives ready for storage or immediate use, lowering the risk of damage in transit and ensuring the probe retains its calibrated condition until deployment. Practical benefits for quality control and tooling The minimal mass and compact geometry keep handling simple and permit quick positioning in jigs and fixtures. For inspection tasks that demand a defined reference point, the probe provides a dependable solution for end‑measurements and plug checks. The lightweight design reduces operator fatigue during repetitive checks, while the precise bore compatibility supports integration with existing gauging setups. This focus on measurable performance helps maintain consistent quality across batches and reduces downtime associated with ambiguous fit checks. For reliable micro‑gauging and workshop‑grade durability from Metav IndustryLine, request a quote or technical consultation from Metav Werkzeuge — specialists are available to advise on suitability and delivery from Emmerich. Technical data Article number: M323.068 GTIN: 4061905055096 Manufacturer: Metav IndustryLine Facts Diameter: 0.68 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: Special steel Workshop execution Single piece test pin Supplied in a protective transport box FAQ What level of accuracy can be expected from this test pin? The M323.068 test pin from Metav IndustryLine delivers an accuracy of ±0.001 mm, suitable for high‑precision end‑measurement tasks in micromechanics and detailed inspection work. Which materials is the probe made from? The probe is manufactured from special steel, chosen for dimensional stability and wear resistance appropriate to workshop use. Is the test pin ready for immediate use on arrival? Yes, the single test pin is supplied in a protective transport box and is suitable for immediate deployment in inspection routines. For which applications is this probe best suited? The M323.068 probe is optimised for end‑dimension verification, plug checks and access to tight bores in precision engineering and small‑part production. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.69mm Gauge Pin Single ±0.001mm 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of ultra‑fine diameter 0.69 mm, tight tolerance ±0.001 mm and workshop‑grade durability for precise end‑measure checks. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application guidance. Test Pin M323.069 — Gauge pin, 0.69 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The Test Pin M323.069 is a precision gauge pin designed for fine end‑measure verification, toolsetting and fixture checks in workshop and inspection environments Diameter 0.69 mm, tolerance ±0.001 mm 50 mm hardened shaft for stable reference length Workshop‑grade design for frequent use Supplied in a protective transport case Precision that reduces reject rates The core advantage of this gauge pin is its exceptional tolerance of ±0.001 mm, which provides a verifiable reference for critical fits and finish checks. Such fine accuracy minimises uncertainty in pass/fail decisions, helping to reduce downstream rejects and rework. Where components have tight bore or pin clearances, a stable reference pin with 0.69 mm nominal diameter allows repeatable verification of hole diameters and seating fits. The tolerance quoted corresponds to high‑precision workshop grade measurement tools and supports reliable statistical process control when used as a comparative standard. Robust workshop design for everyday use Manufactured from special steel and offered in a workshop version, this gauge pin balances surface hardness and corrosion resistance with the handling demands of a production environment. The 50 mm shaft length delivers a usable reach for many fixture and assembly checks while the low mass supports quick positioning without operator fatigue. Supplied in a protective transport case, the pin is ready for secure storage and safe movement between inspection bench and machine tool, preserving the reference surface and ensuring repeatable results over numerous cycles. Practical integration and traceability As a compact gauge pin, this tool fits naturally into inspection routines, gauge sets and customised jigs for repeat checks of small bores, alignment pins and end‑measure verification. The product is identified by SKU M323.069 and GTIN for traceable stock management and ordering. Using a dedicated gauge pin as a reference reduces measurement chain complexity: compared with ad hoc mandrels, a certified precision pin delivers consistent contact geometry and measurable uncertainty, which improves both day‑to‑day decision making and auditability in quality records. For assured small‑bore measurement and fixture setting, choose the Metav IndustryLine test pin M323.069 — contact Metav Werkzeuge for technical advice, availability or to discuss suitable gauge sets at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.069 GTIN: 4061905055102 Manufacturer: Metav IndustryLine Core specifications Diameter: 0.69 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Material: Special steel Special features Workshop version for frequent use Supplied in a protective transport case Category: Gauge pins / Messstifte Precision grade suitable for fine inspection work FAQ What is the primary use of this gauge pin? The Metav IndustryLine test pin M323.069 is intended for end‑measure verification, small‑bore checks and toolsetting where a stable reference diameter of 0.69 mm and tight tolerance is required. Is the pin suitable for repeated workshop handling? Yes, the workshop version is manufactured from special steel and supplied in a protective transport case to withstand regular use and to preserve the measuring surface. How is the product identified for ordering and stock control? The item is listed under SKU M323.069 and GTIN 4061905055102 for unambiguous ordering and inventory tracking. Can this gauge pin be used in fixture alignment tasks? Yes, the compact diameter and 50 mm length make it suitable as a reference in fixtures and jigs for alignment and pass/fail checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.6mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
The combination of high repeatability, a 0.60 mm diameter and an ultra-fine ±0.001 mm tolerance provides reliable reference measurements for precision workshops; benefit from durable special‑steel construction and compact 50 mm length for tight bores. Order the gauge pin directly via Metav Werkzeuge or contact the consultants for application advice. M323.060 Gauge pin – 0.60 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The M323.060 gauge pin is a compact precision reference pin for fine bore verification and end‑measure tasks in workshop metrology, designed for routine inspection and assembly control. Diameter 0.60 mm with ±0.001 mm accuracy 50 mm hardened special steel shaft Workshop version for robust everyday use Compact size for fine bore and micro applications Consistent precision for quality assurance As a tightly specified reference element, the gauge pin delivers ±0.001 mm conformity that supports repeatable pass/fail decisions in inspection workflows. The extremely small 0.60 mm diameter, combined with the short 50 mm length, minimises bending and run‑out, making the pin particularly suited to fine‑mechanical checks and gauging of small bores. For production environments where interchangeability and first‑time quality matter, the dimensional stability of the pin reduces rework and shortens inspection cycles. Engineered for routine workshop use Manufactured from special steel with a workshop configuration, the pin balances wear resistance with ease of handling during frequent use. The compact design and hardened shaft provide a robust reference that resists deformation under normal contact measurement stresses. This construction translates into longer service intervals and dependable behaviour when used in bench measuring stations, pin gauges, or as a reference in small‑component assembly jigs. Fast integration into metrology sets and fixtures The small footprint of the pin simplifies its incorporation into inspection benches and dedicated gauge assemblies. As a standard reference element, it complements gauge blocks, micrometres and dial indicators within a calibrated inspection chain. The clear numeric specification and material designation facilitate traceability in documentation and ensure coherent selection when building sets for micro‑production, watchmaking, miniature components or precision plumbing of assemblies. Contact Metav Werkzeuge today to secure the M323.060 gauge pin for precision bore checks and ensure consistent inspection results across workshop and production environments Technical data Article number: M323.060 GTIN: 4061905054129 Brand: Metav IndustryLine Facts Diameter: 0.60 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: special steel Design: workshop execution Application: precision bore and end‑measure verification FAQ What inspection tasks is this gauge pin suitable for? The M323.060 gauge pin is intended for precision verification of very small bores and fits, serving as a reference in fine‑mechanical inspection and micro‑assembly routines. How does the ±0.001 mm tolerance affect measurement reliability? A tolerance of ±0.001 mm gives a clearly defined acceptance band for pass/fail checks; the M323.060 gauge pin therefore reduces ambiguity in go/no‑go decisions during quality control. Can the pin be used in automated gauge fixtures? Yes. The compact 0.60 mm diameter and short 50 mm length allow integration into automated or semi‑automated gauging setups where small reference elements are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.7 mm Test Pin Single, ±0.001 mm Accuracy, 50 mm Length, Workshop Version - Metav IndustryLine
High-precision 0.70 mm probe pin with a ±0.001 mm tolerance and a 50 mm shaft provides reproducible reference points for fine inspection tasks; workshop-grade special steel and delivery in a transport case ensure robust handling and safe storage. Order the probe directly via Metav Werkzeuge or consult our product specialists for application advice. M323.070 Probe pin (single) – 0.70 mm, ±0.001 mm, 50 mm by Metav IndustryLine The M323.070 is a single precision probe pin designed for fine dimensional checks and end‑measure reference points in workshop inspection setups. Precision tolerance ±0.001 mm Diameter 0.70 mm for micro measurements 50 mm special steel shaft Delivered in transport case Micrometre‑level precision for reliable reference measurements A diameter of 0.70 mm combined with a tolerance of ±0.001 mm delivers micrometre‑level accuracy for repeatable reference points. This level of precision supports consistent pass/fail decisions in inspection routines where small deviations matter. The tight tolerance is particularly advantageous when establishing end‑measure references or checking small bores and features that require a stable contact point; the manufacturing tolerance reduces measurement uncertainty and improves traceability in routine checks. Workshop‑grade construction for durability and stable handling Manufactured from special steel and offered as a workshop version, the probe pin is engineered for everyday use in inspection benches and gauge fixtures. The 50 mm shaft provides enough engagement for secure positioning while remaining compact for confined setups. Finished surfaces and material selection minimise wear and help preserve the nominal diameter over repeated use, so the component remains a dependable reference element in tool rooms and production inspection stations. Safe transport and straightforward replacement in fixtures Supplied as a single unit and delivered in a transport case, the probe pin is protected against impact and contamination during storage and transport. The compact weight and form factor make it simple to keep as a spare or replacement part in a measurement kit. Clear article identification and traceable GTIN facilitate inventory management and ensure the correct pin is used when calibrating or preparing inspection equipment. For workshop-ready micrometre accuracy from Metav IndustryLine, request the M323.070 probe pin via Metav Werkzeuge GmbH or consult our specialists at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.070 GTIN: 4061905055119 Category: Messstifte Facts Diameter: 0.70 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: Special steel Workshop version Delivered in transport case Single probe pin FAQ What tolerance does the probe pin offer? The M323.070 probe pin is specified with a tolerance of ±0.001 mm. What is the exact diameter and length of the pin? The probe pin has a diameter of 0.70 mm and a shaft length of 50 mm. Is the pin supplied ready for transport? Yes, the unit is delivered in a transport case to protect the pin during storage and movement. For which inspection tasks is this pin suitable? The small diameter and tight tolerance make the pin suitable for fine dimensional checks and end‑measure reference points in workshop inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.71mm Gauge Pin, ±0.001 mm, 50 mm Length, Workshop Version - Metav IndustryLine
Take advantage of high-repeatability inspection with a 0.71 mm diameter pin that delivers ±0.001 mm accuracy and a practical 50 mm length, combining precision, compactness and robust workshop suitability—order directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.071 — single precision gauge pin, Ø 0.71 mm, ±0.001 mm A Gauge pin M323.071 designed for fine dimensional checks and end‑measurement tasks in inspection and assembly environments Precision tolerance ±0.001 mm Diameter 0.71 mm for fine bores Length 50 mm for deep checks Made from special steel alloy Delivered in protective case Faster, more reliable inspection through submicrometre accuracy A compact inspection pin with a ±0.001 mm tolerance provides the measurable basis for dependable pass/fail assessments and repeatable checks. The combination of a slim 0.71 mm diameter and a 50 mm working length makes the pin well suited to verification of small bores and end measurements, reducing cycle time for high‑volume checks. The precise tolerance lowers uncertainty during fit inspection and supports consistent assembly decisions, which in turn helps maintain production flow and cut rework rates. Robust construction for regular workshop use Manufactured from special steel, this workshop‑grade gauge pin is engineered for frequent handling without sacrificing form stability. The workshop version specification prioritises a balance between wear resistance and straightness, allowing reliable use in inspection benches and portable test rigs. For secure transport and on‑site protection the pin is supplied in a protective case, ensuring the reference surface remains clean and undamaged between uses and simplifying storage in tool cabinets or instrument sets. Practical handling, simple integration and clear application focus The single‑piece design keeps handling straightforward and the low mass aids quick placement when inspecting small components; the listed weight reflects its compact nature. Its geometry is optimised for end measurements and the verification of fine holes and fits, making it a useful addition to gauge sets, pin blocks and small‑parts test fixtures. The specification suits quality control loops where fine bore verification and consistent repeatability are required for assembly acceptance and product compliance. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine M323.071 and to confirm availability from our Emmerich stock — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M323.071 GTIN: 4061905055126 Material: Special steel Length: 50 mm Diameter: 0.71 mm Accuracy: ±0.001 mm Weight: 0.003 kg Facts Length (numerical): 50 mm Diameter (numerical): 0.71 mm Tolerance (numerical): ±0.001 mm Weight (numerical): 0.003 kg GTIN (numerical): 4061905055126 Special features Workshop version Single gauge pin for fine bore checks Delivered in protective transport case Category: Gauge pins Story trigger: end measurements FAQ What are the exact specifications of this gauge pin? The Metav IndustryLine gauge pin M323.071 has a diameter of 0.71 mm, a length of 50 mm and an accuracy of ±0.001 mm. Is the pin suitable for end measurements of small bores? Yes, the M323.071 is intended for end measurements and fine bore verification where a slim, precise pin is required. How is the gauge pin supplied for transport and storage? This gauge pin is delivered in a protective case to keep the reference surfaces secure during transport and storage. Can the pin be used in pin blocks or fixture assemblies? The single‑piece design is compatible with pin blocks and small fixture layouts, providing a practical geometry for integration in inspection setups. Which brand manufactures this gauge pin? The M323.071 is part of the Metav IndustryLine range and is supplied by Metav Werkzeuge for industrial metrology applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.72mm Test Pin Single ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of laboratory-grade ±0.001 mm repeatability, compact 0.72 mm diameter and a 50 mm working length for fast, reliable reference checks in the workshop; order directly via Metav Werkzeuge or ask the consultants for tailored advice. Gauge pin M323.072 — precision test pin, 0.72 mm diameter, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.072 is a single precision test pin designed for reference measurements and end‑dimension inspection in workshop metrology, supplied as a workshop‑grade item for routine use. High‑precision ±0.001 mm tolerance 50 mm workshop‑grade working length Solid special‑steel construction for durability Supplied in a protective transport case Accuracy that stabilises production decisions A tolerance of ±0.001 mm positions this test pin among high‑precision reference tools suitable for dimensional spot checks and fixture verification. The excellent repeatability reduces measurement scatter and supports decisive accept/reject judgements on incoming parts or subassemblies. Thanks to the fine diameter of 0.72 mm, the pin is ideal for verifying small bores, alignment holes and pin gauges where micrometre‑level variation matters. The measurable benefit for production is quicker go/no‑go decisions and fewer costly reworks. Built for workshop rhythms and frequent handling The workshop configuration emphasises robust everyday use: the pin is manufactured from special steel, offering wear resistance and consistent contact geometry over many cycles. At a 50 mm working length the pin balances access to internal features with handling comfort, and the light mass supports fast positioning during repetitive checks. Supplied in a protective transport case, the item remains protected between uses, ensuring the measurement surface stays clean and true — a practical advantage for busy shops where tool damage or contamination would otherwise impair accuracy. Simple integration into inspection routines As a single‑point reference, this test pin fits easily into established inspection workflows for jigs, fixtures and gauge blocks. It complements handheld gauges and bench fixtures for quick dimensional verification and can be used as a reference in assembly alignment tasks. The compact geometry makes it especially useful for checking small bore concentricity and positional tolerances. Clear, measurable performance means less subjective judgement during inspection and more repeatable results across operators. Transparency and traceable identification for inventory control The part is identified by SKU M323.072 and GTIN 4061905055430, simplifying stock management and ensuring traceability in procurement records. Lightweight and compact, the pin is convenient to store and to include in inspection sets or kitting for specific production lines. Metav’s role as a precision partner supports reliable supply from Emmerich, backed by broad product availability and a quality filter for European customers — an assurance for operations that rely on consistent instrument performance. Contact Metav Werkzeuge for advice on integrating the Metav IndustryLine gauge pin M323.072 into inspection routines and to arrange delivery from our Emmerich facility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M323.072 GTIN: 4061905055430 Brand: Metav IndustryLine Dimensions & Precision Diameter: 0.72 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.003 kg Materials & Features Material: Special steel Version: Workshop execution Packaging: Protective transport case FAQ What size of bore is this gauge pin suitable for? The gauge pin M323.072 has a diameter of 0.72 mm and is intended for verifying small bores, alignment holes and pin gauge checks in workshop metrology. Does the pin come ready for immediate use out of the box? Yes, the Metav IndustryLine gauge pin M323.072 is supplied as a single, ready‑to‑use test pin in a protective transport case suitable for workshop handling. How does the ±0.001 mm tolerance affect daily inspection? A ±0.001 mm tolerance provides high‑precision reference performance that reduces measurement uncertainty during routine checks, enabling clearer go/no‑go decisions and fewer remeasurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.73mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, a 0.73 mm diameter for fine‑bore checks and a 50 mm shaft made from special steel to ensure repeatable end‑measurements; order the test pin directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.073 — Gauge pin, 0.73 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) The test pin M323.073 is a workshop‑grade gauge pin designed for precise end‑measurements, fit checks and inspection tasks where small diameters require stable reference pins ±0.001 mm high‑precision tolerance 0.73 mm diameter for fine measurements 50 mm hardened special‑steel shaft Workshop version with protective case Accurate results for tight tolerances The compact gauge offers a ±0.001 mm tolerance that delivers high repeatability for small‑bore inspections and go/no‑go checks. As a finely finished reference pin, it reduces measurement uncertainty during comparative checks and plug gauges, helping to secure process capability in quality inspections. The controlled tolerance is a rational advantage when validating bore fits or validating tool wear, because precise reference geometry directly reduces rework and rejects. Robust workshop design and handling benefits Built as a workshop version, the pin combines a 50 mm hardened shaft with corrosion‑resistant special steel to withstand regular handling on the shop floor. The compact geometry and finished end faces enable reliable seating in fixtures and micrometres, while the supplied protective case preserves the datum surfaces during transport. This construction prioritises operational uptime and lowers the need for frequent replacement, supporting efficient workflow in production and maintenance environments. Practical application and compatibility Engineered for end‑measurements and fit verification, the gauge pin suits small‑bore gauges, jigs and inspection benches where accurate reference pins are needed. The 0.73 mm nominal diameter makes the pin ideal for fine‑mechanical assemblies and precision valve or nozzle inspections. Its slim profile simplifies insertion into tight features and ensures consistent contact without disturbing the component, which is particularly useful for repetitive dimensional checks in batch production. Contact Metav Werkzeuge for tailored advice on integrating the M323.073 into inspection routines and for reliable, local supply from our Emmerich facility Technical data Article number: M323.073 GTIN: 4061905055447 Brand: Metav IndustryLine Material: Special steel Facts Diameter: 0.73 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Workshop execution Delivered in protective case for transport Single test pin for end‑measurement tasks Story trigger: end measurements FAQ What diameter and tolerance does the pin offer? The gauge pin has a diameter of 0.73 mm and a tolerance of ±0.001 mm, making the M323.073 suitable for precise small‑bore checks. Is the pin suitable for workshop use and repeated handling? Yes. The workshop execution and special steel shaft are designed for routine use; the supplied protective case preserves the measuring faces between operations. For which inspection tasks is this pin intended? It is intended for end‑measurements, fit checks and fine‑bore verification where a slim, accurate reference pin is required. Does the product include a protective container for transport? Yes, the pin is supplied in a protective case appropriate for safe transport and handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.74mm Gauge Pin, Single, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-grade durability, ±0.001 mm accuracy and compact dimensions for reliable end-size checks; order or discuss application details with Metav Werkzeuge for a smooth inspection workflow. Gauge pin, single, 0.74 mm, ±0.001 mm, length 50 mm (Metav IndustryLine) A Gauge pin, single, 0.74 mm, ±0.001 mm, length 50 mm for high-precision end-measurements and plug checks in inspection benches and toolrooms High-precision ±0.001 mm tolerance Diameter 0.74 mm for micro measurements 50 mm special steel shaft for workshop use Supplied in protective transport case Reduce measurement uncertainty with micrometre-grade tolerance This test pin delivers a ±0.001 mm tolerance that significantly reduces uncertainty in small-diameter inspections. For micro-scale control, the 0.74 mm diameter provides a precise reference for bore checks, end-size verification and go/no-go procedures. The extremely fine tolerance means less rework and higher process stability when used as a reference gauge in quality control routines. The compact format suits tight fixtures and minimises influence from handling and fixture play. Workshop-ready construction for repeatable handling Designed as a workshop-grade single gauge pin, the component is manufactured from special steel to combine surface finish and resistance appropriate for frequent use. The 50 mm length keeps the pin stiff enough for stable contact while remaining compact for inline inspection. Supplied individually in a protective transport case, the pin is protected during storage and transit, preserving the measuring surface and ensuring repeatable readings when placed into gauges or measuring fixtures. Easy integration into inspection workflows and traceable stock Lightweight at approximately 0.003 kg and supplied as a single reference item, the pin fits directly into plug gauge sets, depth gauges and fixture inserts for end-size control. The clear SKU documentation enables straightforward inventory and procurement: M323.074 is ready for integration into standard inspection lists or calibration schedules. Where traceability is required, the product data and packaging facilitate labelling and record-keeping for regular checks and quality audits. Contact Metav Werkzeuge to discuss whether the Metav IndustryLine gauge pin M323.074 meets specific inspection requirements or to request a technical quotation by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M323.074 GTIN: 4061905055454 Label: Gauge pin, single, 0.74 mm, ±0.001 mm, length 50 mm Numbers / Core technical data Diameter: 0.74 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: special steel Workshop-grade execution Supplied in protective transport case Category: Gauge pin / test pin Story trigger: end measurements FAQ How precise is this gauge pin for inspection use? The M323.074 gauge pin provides a precision of ±0.001 mm, making it suitable for micrometre-level end-size checks and tight tolerance plug gauging. Is the gauge pin delivered with a calibration certificate? Calibration is not specified in the product data; the gauge pin is supplied as a workshop-grade single pin in a protective case without an explicit calibration certificate. What applications suit this 0.74 mm pin? The pin is intended for small-bore verification, end-measurements and use in fixture-based plug checks in toolrooms and inspection benches; it functions as a precision reference for micro measurements. What is included in the delivery? Delivery includes the single gauge pin (M323.074) and a protective transport case to prevent damage during storage and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.75mm Test Pin Single ±0.001mm Accuracy 50mm Length, Workshop Version - Metav IndustryLine
The combination of a 0.75 mm diameter, a ±0.001 mm tolerance and a 50 mm length delivers highly repeatable end‑measurements while remaining practical for daily workshop use; robust special steel construction and protective packaging ensure durability and safe transport. Order the M323.075 directly via Metav Werkzeuge or consult the technical team for application guidance. M323.075 gauge pin — 0.75 mm, ±0.001 mm, 50 mm (Metav IndustryLine) M323.075 is a single gauge pin designed for precision end‑measure checks and fixture set‑up in workshop environments Workshop design for routine checks Diameter 0.75 mm for fine features Tolerance ±0.001 mm for high precision Made from special steel, robust finish Precision where repeatable measurements matter The core advantage of this inspection pin is its tight manufacturing tolerance: ±0.001 mm. Such accuracy makes it a reliable reference for end‑measurement tasks and quality checks where minimal deviation is critical. Manufactured to consistent dimensional stability, the pin serves as a calibrated reference for gauging small bores, verifying finished feature limits and checking tool run‑out. By specifying a slender 0.75 mm diameter combined with a 50 mm length, the component balances the need for access into narrow features with sufficient engagement length to reduce measurement scatter. This focus on reproducibility supports efficient in‑line checks and helps maintain process control in serial production. Built for regular workshop use and easy handling The workshop version construction emphasises robustness and handling ease under daily use. Produced from special steel, the pin resists wear and retains its geometry during routine contact with jigs and workpieces. Its low mass contributes negligible inertia during placement yet provides a stable feel when seating in fixtures. Supplied in a protective case, the component is ready for safe transport and storage, reducing the risk of nicks that would compromise accuracy. The compact form factor facilitates quick exchange in inspection setups and minimises downtime when multiple reference sizes are employed. Practical integration with fixtures and measuring kits As an inspection or reference pin for end‑measuring and fixture alignment, this component integrates smoothly into assembly aids, go/no‑go sets and verification benches. The geometry and tolerance profile make it suitable for end‑measure checks, reference alignment of small assemblies and precision positioning of gauging fixtures. Where compact reference points are required, the slender diameter allows access into confined features while the defined length provides a consistent datum. Use in combination with micrometres, dial indicators or bench gauge blocks yields a traceable measurement chain for production records. Supply reliability and workshop confidence Sourced under the Metav IndustryLine, the pin reflects a production approach that balances industrial standards with practical workshop needs. The brand’s distribution model supports reliable availability and centralised quality filtering from Emmerich, ensuring components arrive in measured condition and with consistent characteristics. For purchasers seeking a durable, high‑accuracy reference pin for routine inspection tasks, this component offers a pragmatic mix of precision, handling and supply security—attributes that sustain efficient throughput in metalworking and mechanical assembly contexts. For workshop‑grade reference components, request the M323.075 from Metav Werkzeuge — Metav Werkzeuge can be contacted via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 for order details and technical clarification. Technical Data Article number: M323.075 GTIN: 4061905056031 Weight: 0.003 kg Diameter: 0.75 mm Length: 50 mm Tolerance: ±0.001 mm Material: Special steel Version: Workshop Packaging: Supplied in protective case Facts Mass: 0.003 kg Diameter nominal: 0.75 mm Length nominal: 50 mm Tolerance specification: ±0.001 mm Special features Intended use: End‑measure checks and fixture set‑up Construction: Workshop execution for daily use Finish: Durable surface suitable for repeated contact Category: Gauge pin / inspection pin FAQ What diameter and tolerance does this gauge pin offer? The M323.075 gauge pin is manufactured with a 0.75 mm diameter and a tolerance of ±0.001 mm, providing a high‑precision reference for small‑feature measurements. Which material is used for the pin? The M323.075 is made from special steel, selected for wear resistance and dimensional stability during regular inspection tasks. Is the pin supplied with protective packaging? The product is supplied in a protective case suitable for transport and storage, reflecting the workshop‑oriented design. For which applications is this inspection pin intended? This reference pin is intended for end‑measure checks, fixture alignment and verification of small bores or feature limits in machining and assembly environments. Does the product data include a calibration certificate? The available product data do not specify an included calibration certificate; calibration status is not detailed in the standard product information. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.76mm Test Pin Length 50mm ±0.001 mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm repeatability, a compact Ø 0.76 mm diameter and a stable 50 mm length to secure reliable end‑measurements in micromechanical production; order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. M323.076 Gauge pin – Ø 0.76 mm, ±0.001 mm, 50 mm | Metav IndustryLine A M323.076 gauge pin designed for high‑precision end‑measurements and inspection tasks in workshop environments. High‑precision tolerance ±0.001 mm Diameter 0.76 mm for micromeasurements Length 50 mm for stable contact Workshop‑grade special steel construction Precision engineered for micromeasurements The compact Ø 0.76 mm diameter combined with a tolerance of ±0.001 mm positions this gauge pin in the micro range of inspection tools, where minimal form and dimensional variation matter. Such a tight specification reduces measurement uncertainty when checking small bores, fine shafts or end faces; the result is reproducible pass/fail decisions and fewer downstream reworks. The geometry and tolerance serve as the basis for precise end‑measurements in micromechanics and fine‑tolerance assembly. Durable material and workshop readiness Manufactured from special steel, the pin has been configured as a workshop version to withstand routine handling and frequent contact with mating surfaces. The material choice provides wear resistance and stable contact performance over many cycles, supporting consistent measurement results in production environments. The single‑piece design ensures straightforward mounting in gauge fixtures or use as a reference pin during bench inspections, contributing to reliable process control. Practical use and inspection benefits This compact gauge pin integrates easily into manual inspection routines, comparator set‑ups or plug‑gage stacks where small diameters must be verified quickly. The 50 mm length gives a balanced contact surface without excess overhang, aiding alignment and operator control. As a single gauge pin, it is ideal for targeted checks and for establishing fixed reference points during assembly or incoming inspection, improving throughput by simplifying decision steps in quality control. For workshop‑grade precision from Metav IndustryLine, request availability of the M323.076 through Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M323.076 GTIN: 4061905056048 Label: Gauge pin, single, 0.76 mm, ±0.001 mm, length 50 mm Facts Diameter: 0.76 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: Special steel Workshop version Single piece Category: Gauge pins FAQ How precise is this gauge pin? The M323.076 gauge pin offers a tolerance of ±0.001 mm, suitable for micron‑level checks in fine mechanical inspection. Which applications suit this pin best? Its compact diameter and high precision make the pin ideal for micromechanics, small‑bore verification and end‑face inspection in workshop and bench environments. Is the pin delivered as a single item? Yes, the product is supplied as a single gauge pin for targeted inspection tasks and fixture use. What material is used for the pin? The M323.076 is made from special steel, chosen for wear resistance and consistent contact behaviour in frequent inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.77mm Test Pin Length 50mm ±0.001mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the micron-level accuracy and compact handling of this precision test pin to secure repeatable end‑dimension checks and reliable gauge fixtures; the combination of a 0.77 mm diameter, ±0.001 mm tolerance and a 50 mm length supports consistent production control and easy integration into inspection setups — order via Metav Werkzeuge or consult the Metav team for application advice. Test pin M323.077 — Single precision gauge pin, 0.77 mm, ±0.001 mm (Metav IndustryLine) The Test pin M323.077 is a single precision gauge pin designed for end‑dimension inspection and plug‑gauge routines in workshop and metrology environments. Single precision test pin 0.77 mm diameter Tolerance ±0.001 mm for high accuracy 50 mm length for stable probing Workshop version in special steel Micron‑level accuracy for dependable inspections This gauge pin provides a ±0.001 mm tolerance, which corresponds to micrometre‑level precision and supports strict quality control criteria on small bores and critical end dimensions. The small 0.77 mm diameter and fine manufacturing tolerances reduce measurement uncertainty when used as a reference or in go/no‑go checks, enabling operators to document repeatable results and to minimise downstream rework. As a compact precision element, it suits applications where consistent plug‑fit verification is mandatory. Stable handling and repeatability in production With a 50 mm overall length the pin offers a good balance between handling comfort and probing stability. The slender geometry is particularly useful for checking narrow bores, pin holes and counterpart locating features where a controlled insertion depth and straightness are required. The lightweight construction also reduces the influence of operator handling during manual checks, contributing to faster inspection cycles and fewer false rejects in series production. Material choice geared to workshop demands Manufactured from special steel, the pin is specified for dimensional stability under normal workshop conditions. The material selection focuses on keeping geometric integrity during repeated seating in gauges and fixtures, so measurements remain consistent over time. The “workshop version” designation indicates a robust build intended for regular use alongside standard inspection tools in machine shops and assembly areas. Practical integration into inspection workflows At approximately 0.003 kg the pin is easy to manoeuvre and to install in small fixtures or comparator jigs without affecting balance. The single‑piece design simplifies cleaning and visual inspection between cycles. As a precision test pin it can be combined with standard gauge holders or used as a reference element in manual verification processes, supporting both random checks and routine production sampling. Contact Metav Werkzeuge in Emmerich for application guidance or to request this Metav IndustryLine precision gauge pin M323.077 for reliable end‑dimension inspection; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: M323.077 GTIN: 4061905056055 Manufacturer: Metav IndustryLine Material: Special steel Numbers Diameter: 0.77 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Workshop version Single precision test pin Designed for end‑dimension inspection FAQ What level of precision does this gauge pin provide? The gauge pin M323.077 (Metav IndustryLine precision test pin) offers a tolerance of ±0.001 mm, delivering micrometre‑class repeatability suitable for tight end‑dimension checks. For which applications is this pin most suitable? This precision measuring pin is intended for end‑dimension inspection, plug‑gauge verification and narrow bore checks where a 0.77 mm diameter reference is required. What material is used and why does it matter? The pin is produced from special steel to maintain dimensional stability during repeated use, which helps preserve measurement consistency in workshop conditions. How easy is the pin to handle and integrate into fixtures? With a 50 mm length and a weight of around 0.003 kg, the pin is lightweight and straightforward to install in small fixtures or comparator jigs for routine checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.78mm Precision Gauge Pin ±0.001mm Length 50mm, Workshop Finish - Metav IndustryLine
Taking advantage of workshop‑grade construction and ±0.001 mm accuracy, this gauge pin ensures reliable fit checks and end‑measure controls in fine‑tolerance assembly. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for suitability and delivery. Gauge pin M323.078 — single precision test pin, 0.78 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.078 is a compact, workshop‑grade precision test pin designed for fine gauging tasks and small‑bore inspections in manufacturing and quality control. ±0.001 mm tolerance for high precision 0.78 mm diameter for fine gauging 50 mm length for deep reach Workshop‑grade special steel construction Reduced rework through measurable precision High repeatability is central to efficient inspection workflows. With an accuracy of ±0.001 mm, this test pin provides a measurable reference that reduces uncertainty when verifying hole fits, dowel seats or mating parts. The narrow diameter and controlled tolerance minimise play during insertion, which aids decision‑making in go/no‑go checks and limits costly rework. The specified tolerance translates into predictable assembly behaviour, making the pin suitable for process control points where tight clearances determine final part acceptance. Compact dimensions that reach confined features The slim 0.78 mm diameter and 50 mm length combine to create a tool for confined inspection tasks. Its compact profile allows access to small bores and recessed features without the need for additional fixturing. Constructed in special steel with a workshop finish, the pin withstands repeated handling in production environments while maintaining dimensional integrity. The small mass and balanced geometry support stable insertion, which is particularly advantageous when gauging delicate components or when repeatability over many cycles is required. Seamless integration into inspection routines Designed as a single‑piece precision test pin, this item integrates easily into existing gauge sets, inspection benches and manual measurement procedures. It functions effectively for end‑measurement and fit verification, complementing micrometre and comparator checks by offering a direct physical reference. The pin's controlled diameter and length assist in spot checks during assembly and final inspection, helping to preserve process reliability and uphold quality documentation standards in routine production environments. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to confirm availability and specification fit for inspection tasks. Technical Data Article number: M323.078 GTIN: 4061905056062 Label: Gauge pin, single, 0.78 mm, ±0.001 mm, length 50 mm Weight: 0.003 kg Core specifications Diameter: 0.78 mm Length: 50 mm Tolerance: ±0.001 mm Mass: 0.003 kg Materials & special features Material: Special steel Workshop execution Accuracy rating: ±0.001 Single pin configuration FAQ What is the nominal diameter and length of this gauge pin? The nominal diameter is 0.78 mm and the overall length is 50 mm for the M323.078 gauge pin. How precise is the measurement tolerance of the pin? The M323.078 is specified with a tolerance of ±0.001 mm, suitable for high‑precision fit checks. For which tasks is this pin most suitable? This test pin is intended for end‑measure checks, small‑bore verification and fit assessments in assembly and inspection processes. What material is the pin made from and how does that affect use? The pin is made from special steel, giving workshop robustness and dimensional stability under regular handling. Can the pin be used as part of a gauge set or standalone for spot checks? The single‑piece configuration of M323.078 adapts well to both gauge sets and standalone spot checks in production and quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.79mm Precision Gauge Pin Workshop Version 50mm Length ±0.001mm - Metav IndustryLine
Take advantage of the combination of absolute measuring precision, compact form and robust workshop design for reliable end‑measure checks. The ±0.001 mm tolerance, 0.79 mm diameter and 50 mm length ensure repeatable results in fine gauging tasks. Order directly via Metav Werkzeuge or contact the consultants for application advice. M323.079 Gauge Pin — Single 0.79 mm, ±0.001 mm, 50 mm (Metav IndustryLine) The M323.079 gauge pin is a workshop‑grade precision test pin designed for end‑measurement and fine gauging in inspection and production environments. Precision tolerance ±0.001 mm Diameter 0.79 mm for fine gauging 50 mm hardened special steel shaft Delivered in protective transport box Precision that supports reliable end‑measure decisions The gauge pin offers a declared tolerance of ±0.001 mm, which places it into the high‑precision category for workshop test pins. This level of accuracy provides a stable, measurable reference for end‑measure tasks and close‑tolerance checks, reducing ambiguity in pass/fail decisions. The slender 0.79 mm diameter is ideal where very small bores, pin gauges or fine features require verification; the combination of small cross‑section and micron‑level tolerance makes the component particularly useful in fine mechanics, toolmaking and precision assembly where consistent repeatability matters. Robust construction and practical protection for everyday workshop use Manufactured from special steel, the shaft balances surface hardness with dimensional stability to withstand repeated insertion and withdrawal during inspection cycles. The 50 mm length offers sufficient engagement for most end‑measure applications while keeping handling simple; the low mass supports quick positioning and minimal inertia. Delivery in a protective transport box preserves the measuring surface in transit and on the workbench, reducing the risk of nicks or contamination that would compromise accuracy. The workshop execution ensures a practical mix of durability and ease of use for routine quality checks. Clear application benefits and procurement confidence As a single, precision gauge pin in a workshop‑grade format, this item serves as a straightforward reference for end‑measure checks, go/no‑go fixtures and assembly verification. Its small diameter and tight tolerance make it suitable for checking plug fits, alignment dowels and fine bores. Procurement from Metav IndustryLine comes with the reassurance of established distribution and a European quality filter in Emmerich; this supports reliable supply and predictable stock management for production and inspection departments. For specific integration into measurement fixtures or to confirm suitability for a particular inspection task, technical advice is available through Metav Werkzeuge. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge for tailored advice—info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.079 GTIN: 4061905056079 Material: Special steel Diameter: 0.79 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Version: Workshop execution Delivery: Protective transport box included Facts High precision: ±0.001 mm Small diameter for fine features: 0.79 mm Compact engagement length: 50 mm Very low mass: 0.003 kg Special features Single gauge/test pin design Suited for end‑measure and fine gauging Protective transport box for handling and transport Category: Gauge pins (Messstifte) FAQ What is the declared accuracy of the pin? The declared accuracy is ±0.001 mm, giving micron‑level repeatability for fine end‑measure checks with the M323.079 gauge pin. Which material is the pin made from? This gauge pin is manufactured from special steel, chosen for dimensional stability and resistance to wear in routine workshop use. Is the gauge pin supplied protected for transport? Yes. The item is supplied in a protective transport box (plastic or wooden), which preserves the measuring surface during shipment and handling. Can the pin be used as a reference in inspection fixtures? The workshop‑grade design of this test pin makes it suitable as a reference element in gauges and fixtures for end‑measure verification; specify calibration requirements if certified reference status is needed. Which measurement tasks are best suited to this pin? The combination of 0.79 mm diameter and ±0.001 mm tolerance suits fine bore checks, plug fits, alignment dowels and precise assembly inspections where small‑feature gauging is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.81mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
With a focus on repeatable inspection, the combination of ±0.001 mm tolerance, a 0.81 mm diameter and a 50 mm length delivers precise end‑measure verification in workshop environments; the robust workshop design and protective transport case keep the instrument ready for daily use. Order M323.081 directly via Metav Werkzeuge or contact our consultants for application advice. M323.081 gauge pin — 0.81 mm, ±0.001 mm, 50 mm (Metav IndustryLine) M323.081 is a single gauge pin designed for fine end‑measurement and bore verification in workshop inspection Workshop version for robust daily use Tolerance ±0.001 mm for high‑precision checks Diameter 0.81 mm for fine bore verification Supplied in protective transport case High‑precision verification that reduces rework The compact cylindrical pin offers a ±0.001 mm tolerance, which corresponds to a one‑micrometre allowance and supports critical fit checks where even small deviations cause assembly issues. With a 0.81 mm diameter, this instrument is tailored for narrow bores and fine components; the narrow profile minimises disturbance to the measured feature and helps achieve consistent results. The measurable benefit is lower scrap rates and fewer rework cycles, because measurement uncertainty is reduced by design. The pin’s light mass (3 g) and rigid geometry ensure stable contact during insertion, improving repeatability across successive measurements. Built for the workshop — durability and handling Delivered in a protective transport case, the workshop version is finished for everyday operation and handling. The special steel composition provides wear resistance suitable for repetitive checks while maintaining surface integrity where measurement reference is required. The 50 mm length balances reach and control: long enough to engage shallow bores and short enough to be guided steadily by hand or simple fixtures. This pragmatic construction means fewer interruptions in inspection workflows and a reliable tool for routine quality control in busy production areas. Practical applications and compatibility with inspection tasks Designed as a single gauge pin for end‑measure and plug checks, the instrument is suitable for toolroom verification, small‑batch inspection and final acceptance testing of precision components. Its dimensions make it appropriate for fine mechanical parts, precision connectors and features where sub‑millimetre accuracy is essential. The gauge pin’s simplicity supports integration with basic fixtures or manual comparators and provides a clear go/no‑go reference when detailed metrology equipment is not required. The result is an accessible precision tool that complements laboratory instruments and strengthens shop‑floor quality routines. For reliable measurement of fine bores, choose the Metav IndustryLine M323.081 gauge pin and contact Metav Werkzeuge in Emmerich for tailored technical advice and fast supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.081 GTIN: 4061905057007 Manufacturer: Metav IndustryLine Facts Diameter: 0.81 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: special steel Workshop version for daily use Supplied in protective transport case Single gauge pin for end‑measure checks FAQ What accuracy can be expected from this gauge pin? The M323.081 gauge pin is specified with a tolerance of ±0.001 mm, providing micrometre‑level accuracy suitable for precise end‑measure and plug verification. Which applications suit a 0.81 mm gauge pin? This diameter is ideal for checking small bores, fine mechanical components and precision connectors where sub‑millimetre verification is required. Is the instrument appropriate for repeated workshop use? Yes, the workshop version and the special steel construction are designed for frequent handling and inspection in production environments. Does the product come protected for transport and storage? The gauge pin is supplied in a protective transport case to reduce the risk of damage and to keep the measuring surface intact during handling. Can this pin be used together with simple fixtures or comparators? The single gauge pin format allows easy use with manual fixtures, comparators and basic inspection jigs for quick go/no‑go checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.82mm Test Pin 50mm Length ±0.001mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the proven combination of industrial repeatability, workshop-hardy construction, and pinpoint diameter tolerance for reliable end‑size checks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.082 — single workshop gauge pin with ±0.001 mm tolerance The Gauge pin M323.082 is a compact workshop-grade test pin for precise end-size verification and plug-fit checks in quality control and assembly. Workshop-grade construction for daily use Diameter tolerance ±0.001 mm for high repeatability Length 50 mm for compact inspection setups Special steel for long-term wear resistance Precision that removes doubt from small‑part inspection Engineered for tasks where even tiny deviations matter, this single gauge pin delivers ±0.001 mm diameter accuracy on a 0.82 mm nominal size. Such fine tolerance reduces uncertainty in pass/fail decisions during dimensional control and supports consistent comparative measurement between batches. The result is a measurable reduction in rework and fewer downstream assembly issues, translating into tangible efficiency gains for production and inspection processes. Robust material and workshop design for everyday handling Manufactured from special steel and presented in a workshop-oriented design, the pin resists wear and maintains geometry through repeated contact. A 50 mm shaft length keeps handling practical while preserving stiffness for repeatable results in tight jigs or fixture-based checks. The compact form factor suits bench inspectors and in-process verification alike, offering durability without the complexity of larger gauge systems. Easy integration into inspection routines and fixtures The compact single-pin format is ideal for end‑size checks, plug‑fit testing and use as a reference master in assembly stations. Thanks to the fine diameter control and low mass, it is straightforward to incorporate into manual gauges, comparison stands or dedicated fixtures. Traceable identification via the GTIN and SKU supports inventory management and quality documentation inside existing workflows and inspection plans. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine gauge pin M323.082 can be deployed in current inspection setups or to request a tailored supply recommendation from our team Technical data Article number: M323.082 GTIN: 4061905057014 Brand: Metav IndustryLine Weight: 0.003 kg Facts Nominal diameter: 0.82 mm Diameter tolerance: ±0.001 mm Length: 50 mm Accuracy specification: ±0.001 mm Special features Workshop execution Single gauge pin for end‑size checks Material: special steel Category: Gauge pins (Messstifte) FAQ What is the intended use for this gauge pin? The gauge pin is intended for end‑size verification, plug‑fit checks and as a simple reference in inspection fixtures; the Metav IndustryLine gauge pin M323.082 is optimised for small‑diameter parts. How precise is the diameter control of the pin? Diameter control is stated at ±0.001 mm, giving the M323.082 the repeatability required for stringent pass/fail assessments on small features. Which material is the pin made from and what does that mean for wear? Manufactured from special steel, the pin offers improved wear resistance compared with untreated alloys, supporting longer service life in regular inspection tasks. Can the pin be used in jigs and fixtures for automated checks? Yes, the compact geometry and stable diameter tolerance make the pin suitable as a reference element in manual or semi‑automated fixtures for in‑process verification. How is the product identified for stock and documentation purposes? The product is listed under SKU M323.082 and GTIN 4061905057014, enabling clear traceability in procurement and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.83mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of extreme measuring precision, durable special‑steel construction and workshop‑ready packaging for reliable in‑process checks and reduced rework. Order the gauge pin directly via Metav Werkzeuge or consult the technical team for integration advice. M323.083 Gauge pin — 0.83 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.083 is a single precision gauge pin designed for fine bore inspection and end‑measure verification in workshop environments. High‑precision ±0.001 mm tolerance Solid special‑steel construction 50 mm working length for stable handling Supplied in a transport case for safe storage Measure small bores with laboratory‑grade precision A compact, high‑accuracy pin for dimensional checks, the gauge pin delivers a tolerance of ±0.001 mm, equivalent to 1 µm, which places it in the class of ultra‑fine inspection tools. Such precision reduces the risk of false rejects and costly rework by providing repeatable go/no‑go verification of holes, seats and mating features. The specified 0.83 mm diameter is produced to tight form and roundness standards so that bore conformity can be assessed reliably during setups or batch checks. Durable design and workshop suitability for daily use Manufactured from special steel and offered in a workshop execution, this single pin withstands typical handling while retaining measurement integrity. The 50 mm length gives sufficient projection for insertion and stable handling without excessive lever arm that could introduce deflection. Delivery in a transport case protects the gauge during movement between inspection stations or jobsites and helps maintain nominal surface condition; the packaging is intended for transport safety rather than long‑term storage. Practical uses and integration into inspection routines The precision pin is suited to end‑measure checks, go/no‑go verification, and use as a reference for setting up gauges or fixtures. In routine quality control it functions as a direct, tactile method for assessing bore size and fit where optical or dimensional instruments are impractical. The M323.083 complements micrometre and calliper work by offering a simple, robust check that integrates into process control across small‑part production, toolmaking and precision assembly. Contact Metav Werkzeuge today for availability, batch information and advice on fitting the Metav IndustryLine M323.083 gauge pin into your inspection workflow Technical Data Article number: M323.083 GTIN: 4061905057021 Label: Prüfstift, einzeln, 0,83mm, +/- 0.001 mm Länge 50 mm SKU: M323.083 Manufacturer: Metav IndustryLine Special feature: Werkstatt‑Ausführung Delivery: transport case Facts Diameter: 0.83 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: Special steel Single test pin Category: Gauge pins Intended for workshop inspection FAQ What degree of accuracy can be expected from this gauge pin? The M323.083 gauge pin is manufactured to a tolerance of ±0.001 mm, providing micrometric accuracy suitable for fine bore verification and precision inspection tasks. Is the pin suitable for production use in a workshop environment? Yes — the workshop execution and special steel construction make the gauge pin robust for everyday inspection routines while maintaining dimensional stability. How is the gauge pin supplied and protected during transport? The pin is supplied individually and comes in a transport case to protect the measuring surface and ensure safe handling between stations. Can this pin be used for setting up gauges or fixtures? The 0.83 mm diameter and stable 50 mm length make it suitable as a reference pin for fixture alignment, positional checks and go/no‑go verification in small‑part assemblies. Does the product include any certification or calibration document? No specific calibration certificate is listed with the product data; please contact Metav Werkzeuge for information on calibration options and traceability if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com