Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
0.4 mm Test Pin, Single, ±0.002 mm Tolerance, 40 mm Probe Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine tolerance, compact geometry and workshop‑grade steel for reliable end‑dimension checks; the pin’s 0.40 mm diameter with ±0.002 mm accuracy supports reproducible acceptance tests and inline checks. Order the M323.040 precision pin directly via Metav Werkzeuge or consult the technical team for application advice. M323.040 — Precision gauge pin (0.40 mm, ±0.002 mm) by Metav IndustryLine The M323.040 is a single‑piece precision gauge pin designed for exact end‑dimension verification and fit checks in workshop and production environments. Precision diameter 0.40 mm ±0.002 mm Pin length 40 mm, overall length 57 mm Special steel construction, workshop variant Accurate end‑dimension checks with micron‑level confidence The compact geometry of this precision pin is engineered for repeatable end‑dimension verification. With a nominal diameter of 0.40 mm and an accuracy of ±0.002 mm, the component enables reliable pass/fail checks for small bores, pin fits and final inspection steps. The tight tolerance reduces uncertainty in go/no‑go decisions and supports process control, making it suitable for quality control stations where consistency and traceability matter. Laboratory metaphors aside, this tool converts tight specifications into manageable routine checks. Robust workshop design for routine handling and fixture use Constructed from special steel, the pin combines surface integrity with resilience against routine handling in a workshop setting. The 40 mm pin length and 57 mm overall length balance reach and stability: long enough to engage recessed features while remaining stiff under typical probing forces. The single‑piece supply suits integration into jigs, check fixtures and comparator setups; the compact mass (approx. 0.003 kg) minimises disturbance when used in delicate assemblies. This workshop execution reduces wear in standard production use while keeping handling straightforward for operators. Seamless fit into measurement routines and quality flows The precision pin is intended as a practical tool in measurement chains: it performs end‑measurements and fit checks quickly, thereby shortening inspection cycles and supporting throughput. Because the pin is dimensionally stable within the specified tolerance, recorded results can be used for statistical process control or short‑term decision making without frequent recalibration. For specialised applications, the Metav IndustryLine designation signals compatibility with common metrology accessories and fixtures, ensuring predictable behaviour in mixed inspection benches. For secure procurement and application support, request the Metav IndustryLine M323.040 precision pin from Metav Werkzeuge — technical advice and ordering assistance are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.040 GTIN: 4061905054266 Manufacturer: Metav IndustryLine Facts Diameter: 0.40 mm Tolerance: ±0.002 mm Pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg ECLASS: 21170231 Special features Material: Special steel Workshop execution Single pin supply Application: end‑dimension checks and fit testing FAQ What applications is this precision pin suited for? The M323.040 precision gauge pin is suitable for end‑dimension verification, fit checks and small‑bore inspection in workshop and production environments. How precise is the gauge pin and what does that mean in practice? With a nominal diameter of 0.40 mm and a tolerance of ±0.002 mm, the pin delivers micron‑level repeatability for go/no‑go checks and short inspection runs using common metrology fixtures. Can the pin be integrated into fixtures or jigs? Yes. The special steel construction and the 40 mm pin length allow secure mounting in fixtures and use with comparators or inspection benches for reproducible checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.41mm Test Pin Single ±0.002mm, Pin Length 40mm, Total Length 57mm Workshop Version - Metav IndustryLine
Take advantage of precision, consistent tolerance and compact handling for reliable end‑measurement and alignment tasks; the small diameter and tight tolerance reduce rework and speed inspection routines. Order the item directly via Metav Werkzeuge or ask the consultants for application advice. M323.041 Gauge Pin – 0.41 mm, ±0.002 mm (Metav IndustryLine) The M323.041 is a single 0.41 mm precision gauge pin intended for end‑measurement and fine alignment checks in metrology and workshop inspection tasks Workshop-grade precision plug gauge ±0.002 mm Diameter 0.41 mm, special steel construction Pin length 40 mm, overall length 57 mm Supplied in protective case for transport Small size, big impact on inspection efficiency A compact precision pin with a nominal diameter of 0.41 mm and a narrow tolerance of ±0.002 mm enables fast, repeatable checks of small bores, pin fits and reference gauges. The reduced handling time for very small features translates into shorter inspection cycles and fewer stoppages on the production line. The use of special steel ensures mechanical stability during repeated insertions, so measurement routines remain dependable without frequent replacements. Robust workshop execution for everyday use Designed as a workshop‑grade test pin, the tool withstands routine use in assembly and quality control environments. The 40 mm measuring shank and 57 mm overall length provide sufficient engagement for most small‑part checks while keeping handling straightforward. Supplied in a protective case, the gauge pin stays secure during storage and transport, reducing the risk of damage and preserving its tight tolerance for extended service life. Practical benefits and application scenarios This precision pin is suited for end‑measure checks, alignment of fixtures and control of assembly fits where sub‑millimetre accuracy matters. The narrow diameter makes it ideal for micro‑components, electrical connectors and small bores in precision engineering. By integrating a reliable gauge pin into inspection routines, process engineers achieve clearer go/no‑go decisions and reduce the likelihood of concealed defects affecting downstream assembly. For tailored advice on integrating the Metav IndustryLine M323.041 into inspection workflows or to request a procurement quote, contact Metav Werkzeuge in Emmerich for specialist support and next‑day dispatch options. Technical Data Article number: M323.041 SKU: M323.041 GTIN: 4061905054273 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 0,41 mm, +/- 0.002 mm Stiftlänge 40 mm, Gesamtlänge 57 mm Facts Diameter: 0.41 mm Accuracy / Tolerance: ±0.002 mm Pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg Special features Material: Special steel Version: Workshop execution Packaging: Supplied in case for transport Intended use: End‑measurement and alignment tasks FAQ What tolerance does the M323.041 gauge pin offer? The M323.041 gauge pin from Metav IndustryLine is specified at ±0.002 mm, providing tight repeatability for micro‑inspection tasks. Which applications suit this small‑diameter pin? This precision pin is intended for end‑measurement, small bore checks and fixture alignment in precision engineering and electronics assembly. What material is used for the gauge pin and how is it delivered? The pin is made from special steel and is supplied in a protective case to prevent damage during transport and storage. What are the physical dimensions of the pin? Nominal diameter 0.41 mm, pin (measuring) length 40 mm, overall length 57 mm; weight approximately 0.003 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.42 mm Gauge Pin Single ±0.002 mm Tolerance 40 mm Stem Length 57 mm Overall, Workshop Version - Metav IndustryLine
Take advantage of a combination of pinpoint accuracy and compact dimensions for reliable end‑of‑line checks. The small‑diameter gauge pin offers 0.42 mm nominal size with a tight ±0.002 mm tolerance, supplied individually for easy replacement or fixture use — order directly via Metav Werkzeuge or consult the team for specification advice. Gauge pin M323.042 – precision inspection pin, 0.42 mm, ±0.002 mm (Metav IndustryLine) A gauge pin M323.042 designed for precision dimensional checks and fixture verification in inspection benches and workshop environments. 0.42 mm diameter, tolerance ±0.002 mm Special steel construction for wear resistance Pin length 40 mm, total length 57 mm Workshop version for routine inspection tasks High-precision measurement that improves process reliability Engineered for tight dimensional control, the 0.42 mm diameter pin with a ±0.002 mm specification delivers reproducible contact geometry for go/no‑go checks and repeat measurements. The fine tolerance reduces measurement scatter and increases confidence in sorting and inspection steps. Where small bores or pin gauges are used as reference elements in fixtures, the consistent shaft diameter and cylindricity minimise positional error and help maintain traceability across repeated sampling. Durable workshop design for daily inspection cycles Built in a workshop version with special steel, the probe resists surface wear and withstands routine handling in production areas. The pin length 40 mm combined with a total length 57 mm provides sufficient engagement depth for many common verification tasks while keeping the accessible shank length for secure clamping or manual handling. The low mass (approx. 0.003 kg) reduces the risk of impact damage during use and simplifies insertion in delicate assemblies, preserving accuracy over extended service intervals. Practical integration and quality-control benefits Supplied individually, the component is straightforward to replace within modular fixtures or as a single spare element in quality departments. The compact geometry makes it suitable for close‑pitch layouts and small‑bore inspection, while the clearly defined nominal size supports catalogue management and inventory control under SKU M323.042. Using standardised pins with documented tolerances streamlines inspection protocols and supports consistent decision thresholds in incoming inspection, in‑process checks and final acceptance routines. For workshop environments that demand compact precision, consider the Metav IndustryLine gauge pin M323.042 — contact Metav Werkzeuge for ordering and specification support at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: M323.042 GTIN: 4061905054280 Brand: Metav IndustryLine Material: Special steel Weight: 0.003 kg Facts Nominal diameter: 0.42 mm Tolerance: ±0.002 mm Pin length: 40 mm Total length: 57 mm Special features Workshop execution Supplied individually Label: Prüfstift, single 0.42 mm SKU: M323.042 FAQ What measurement accuracy can be expected from this gauge pin? The gauge pin is specified at ±0.002 mm tolerance; this precision supports repeatable go/no‑go checks and fine‑tolerance inspection tasks. Is the pin suitable for use in inspection fixtures and jigs? Yes, the workshop execution and the pin length 40 mm with a total length 57 mm make it suitable for fixture mounting and routine verification applications. What material is the probe made from and how does that affect wear? The probe is made from special steel, chosen for wear resistance in workshop environments to preserve surface integrity and dimensional stability. Is the component supplied as a set or individually? The item is supplied individually; replacement or spare‑part management is therefore simplified for fixture maintenance. How is this part identified for procurement and stock control? The part is listed under SKU M323.042 and GTIN 4061905054280 for clear identification in procurement and inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.43mm Test Pin Single ±0.002mm Stem Length 40mm Total Length 57mm Workshop Version - Metav IndustryLine
Take advantage of the combination of micrometre-level accuracy, compact geometry and a robust workshop design for reliable end‑measurements and fixture checks. The single Test pin M323.043 offers a 0.43 mm diameter with a tolerance of ±0.002 mm for consistent repeatability in production control. Order the Test pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin M323.043 — single gauge pin, Ø 0.43 mm, ±0.002 mm (Metav IndustryLine) A Test pin M323.043 designed for high‑precision end‑measurements and fixture verification in workshop and inspection environments. Test pin M323.043, Ø 0.43 mm, ±0.002 mm accuracy Pin length 40 mm, overall length 57 mm Made from special steel, workshop design Supplied individually for fixture and end‑measurements Precision where small tolerances matter The gauge is made for applications that demand high repeatability: with a nominal diameter of Ø 0.43 mm and a specified tolerance of ±0.002 mm (equivalent to 2 µm), it serves as a reliable reference for fine end‑measurements and pin gauges. Such tolerances are critical when detecting minute deviations during assembly or when checking end faces and bores. The narrow diameter and tight tolerance minimise measurement uncertainty, enabling traceable checks that support quality control procedures. Robust workshop design for routine inspection Constructed in special steel and specified as a workshop version, this single probe is balanced between finesse and durability. The pin length 40 mm combined with an overall length 57 mm provides sufficient engagement for many fixture and end‑measurement tasks while remaining compact for handheld use or insertion into gauge holders. The material choice offers wear resistance under regular inspection cycles, meaning fewer replacements and stable dimensional behaviour over time. Practical benefits for production and tooling Delivered as a single item, the probe is ideal for targeted checks on gauges, fixtures and end‑masses where space is limited. Its small mass contributes negligible loading on delicate assemblies, while the precise tolerance supports go/no‑go assessments and comparative measurements against master gauges. Where process stability is required, this gauge pin simplifies integration into existing measurement routines and assists in maintaining consistent production quality. For reliably precise end‑measurements, request availability and expert advice on the Metav IndustryLine Test pin M323.043 from Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: M323.043 GTIN: 4061905054297 Material: special steel Designation: single test pin Facts Diameter: 0.43 mm Tolerance / Accuracy: ±0.002 mm Pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg Special features Workshop version Supplied individually Intended for end‑measurements and fixture checks FAQ What is the diameter of the Test pin M323.043? The Test pin M323.043 has a nominal diameter of 0.43 mm. What accuracy does the Test pin M323.043 offer? The Test pin M323.043 is specified with a tolerance of ±0.002 mm (2 µm). What material is the Test pin M323.043 made from? The Test pin M323.043 is manufactured from special steel and specified as a workshop design. What are the pin and overall lengths of the Test pin M323.043? The Test pin M323.043 has a pin length of 40 mm and an overall length of 57 mm. For which applications is the Test pin M323.043 suitable? The Test pin M323.043 is suitable for end‑measurements, fixture verification and precision checks in workshop and inspection settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.44mm Gauge Pin Single, ±0.002mm, Pin Length 40mm, Total Length 57mm, Workshop Version - Metav IndustryLine
Benefit from extremely fine tolerances and a compact form that suits precision end‑measure tasks; the pin’s 0.44 mm diameter with ±0.002 mm accuracy and robust special steel construction support reliable inspection routines. Order the M323.044 directly via Metav Werkzeuge or contact our consultants for technical advice. M323.044 Test Pin — 0.44 mm, ±0.002 mm workshop grade The M323.044 is a single precision test pin for fine end‑measurements and gauging applications, designed as a workshop‑grade inspection tool for repeatable checks. Precision tolerance ±0.002 mm Diameter 0.44 mm for fine measurements Shaft length 40 mm, overall 57 mm Special steel for workshop durability Accuracy that reduces rework and inspection time The compact inspection probe delivers a ±0.002 mm tolerance, making it suitable for tasks where small deviations matter. With a 0.44 mm diameter and a slim profile, the pin excels in end‑measure applications and confined gauge fixtures, enabling faster go/no‑go decisions. The high repeatability reduces the need for follow‑up checks and supports tighter process control in routine production environments. Robust format for frequent shop‑floor use Constructed from special steel and specified as a workshop execution, the component balances resilience with handling convenience. The 40 mm shaft and 57 mm overall length provide enough reach for common fixture arrangements while remaining rigid for accurate contact. The design minimises deformation under light probing force, so surface interactions stay consistent and the inspection result remains trustworthy across cycles. Simple integration into existing inspection setups The single‑piece layout of this measuring pin simplifies replacement and calibration routines. Traceability is supported via the SKU and GTIN, and the compact form factor fits standard pin holders and gauge blocks without modification. For metrology tasks that demand concise, verifiable measurements, this inspection pin helps standardise checks and shortens setup times on the shop floor. For workshop‑grade precision with ±0.002 mm accuracy, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M323.044 GTIN: 4061905054303 Description: Single test pin, 0.44 mm, ±0.002 mm, shaft length 40 mm, overall length 57 mm Facts Diameter: 0.44 mm Tolerance: ±0.002 mm Shaft length: 40 mm Overall length: 57 mm Weight: 0.003 kg Measurement range max: 0.44 mm Special features Material: special steel Workshop‑grade execution Individual delivery Category: Measuring pins eClass: 21170231 FAQ Is this pin suitable for end‑measurements in small bores? The M323.044 test pin is intended for fine end‑measurements and fits small bores and precision fixtures thanks to its 0.44 mm diameter and tight tolerance. Can the pin be used in standard pin holders and gauge blocks? Yes, the inspection pin from Metav IndustryLine is designed for straightforward integration into common holders and gauging setups without modification. What material is the pin made from and how does that affect wear? Made from special steel, the M323.044 offers good wear resistance for workshop use while maintaining the contact fidelity required for repeated measurements. How precise are the measurements with this test pin? The measuring pin provides a tolerance of ±0.002 mm, supporting repeatable checks and reducing measurement uncertainty in routine inspection tasks. Is traceability provided for procurement and inventory? The product is supplied with a SKU (M323.044) and GTIN (4061905054303) for clear traceability and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.45 mm Test Pin Single ±0.002 mm Length 40 mm Total Length 57 mm Workshop Version - Metav IndustryLine
Taking advantage of precision (±0.002 mm) and a compact 0.45 mm diameter, this workshop-grade gauge pin delivers reliable results for small-bore checks and repeatable end-dimension verification; supplied in a protective transport case for safe handling. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. M323.045 Gauge Pin (0.45 mm) – Precision ±0.002 mm, Special Steel by Metav IndustryLine The M323.045 gauge pin is a workshop-grade precision pin for checking small bores and end dimensions in fine mechanical assemblies 0.45 mm diameter, tolerance ±0.002 mm Workshop version, robust special steel Pin length 40 mm, overall 57 mm Supplied in protective transport case Precision for the smallest bores and tight tolerances The compact design classifies this instrument in the Micro range and is optimised for high-precision checks on very small diameters. With a nominal diameter of 0.45 mm and a declared tolerance of ±0.002 mm, the pin provides a verifiable reference for fit and clearance measurements where micrometre-level control matters. Such accuracy reduces uncertainty in production checks and quality control, enabling faster acceptance decisions and fewer reworks. The tight tolerance is especially beneficial for fine mechanical parts, miniature bearings and precision connectors where repeatable dimensional control is essential. Robust workshop construction for everyday checking Designed as a workshop version, the pin is manufactured from special steel to withstand repeated use while maintaining dimensional stability. The pin length of 40 mm and an overall length of 57 mm give sufficient engagement depth for reliable insertion into bores without excessive handling, and the low mass supports quick manipulation during sampling. The hardened surface and material choice reduce wear and preserve the measuring edge, so the tool remains dependable through routine inspection cycles. Supplied in a protective transport case, the pin arrives ready for secure storage and safe transport between bench and machine. Practical handling, traceability and industrial use Delivered as a single precision gauge pin, the item is identified as M323.045 (GTIN 4061905054310) for easy inventory and traceability. The compact profile makes the pin suitable for insertion checks, end‑dimension validation and use in small jig setups where accessibility is limited. Its measurement capability complements calipers and micrometres by providing a fixed-diameter reference that is straightforward to interpret and less sensitive to operator technique. For complex applications or integration into existing inspection routines, Metav’s technical consultants can advise on suitable workflows and matching gauge sets to streamline quality control. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge for tailored advice and to secure the M323.045 gauge pin with protective transport case through Metav Werkzeuge’s ordering channels Technical data Article number: M323.045 GTIN: 4061905054310 Brand: Metav IndustryLine Label: Gauge pin, single, 0.45 mm, ±0.002 mm; pin length 40 mm; overall length 57 mm Weight: 0.003 kg Numbers / Core technical data Nominal diameter: 0.45 mm Tolerance: ±0.002 mm Pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg Special features / Materials Material: special steel Workshop version (robust design) Supplied in protective transport case Single-piece delivery (individual gauge pin) FAQ What measurement tasks is this gauge pin best suited for? The M323.045 gauge pin from Metav IndustryLine is designed for checking very small bores, end dimensions and fit verification in fine mechanical assemblies where a 0.45 mm reference is required. Does the gauge pin come with traceability information? The M323.045 is supplied as a single, identified item (GTIN 4061905054310) for inventory control and traceability in inspection workflows. What material is used for the pin and why does it matter? The pin is made from special steel to provide wear resistance and dimensional stability during repetitive checks, ensuring that the gauge retains its specified tolerance of ±0.002 mm. Can the pin be used in production sampling and jig checks? Yes, the compact dimensions and overall length of 57 mm make the pin suitable for production sampling, jig checks and accessibility-critical inspections where a rigid, fixed-diameter reference is needed. Is the M323.045 supplied ready for safe transport and storage? Yes, the gauge pin is supplied in a protective transport case to prevent damage during handling and storage Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.46mm Test Probe, Single, ±0.002mm Accuracy, 40mm Pin Length, Workshop Version, In Case - Metav IndustryLine
Take advantage of ±0.002 mm accuracy and a 0.46 mm diameter to secure repeatable end‑measurements and reliable gauging in workshop environments; order the matching test pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.046 Test Pin – Gauge Pin, 0.46 mm, ±0.002 mm (Metav IndustryLine) A M323.046 gauge pin designed for precise end‑measurements and fine gauging tasks in workshop metrology High precision ±0.002 mm tolerance Diameter 0.46 mm for fine gauging Made from special steel for durability Workshop version with 57 mm overall length Consistent micro‑precision that reduces rework The narrow 0.46 mm diameter combined with a tight ±0.002 mm tolerance delivers a level of repeatability suited to fine inspection tasks where marginal deviations matter. This degree of control reduces downstream rework by catching dimensional drift early in the process, and supports routine comparative checks and go/no‑go verification of finished bores or pins. The specification is aligned with precision gauging practices and allows straightforward integration into measurement sequences where narrow clearances are inspected. Robust construction for daily workshop use Manufactured from special steel, the pin is engineered to withstand the knocks and handling typical of a busy workshop while retaining its measurement integrity. The 40 mm pin length and 57 mm overall length provide stable insertion depth and a convenient grip length for manual handling or use with simple clamping fixtures. Small mass (about 0.003 kg) contributes to easy positioning in dedicated jigs and reduces the risk of accidental deflection during spot checks, making the component a pragmatic choice for production and maintenance teams. Compact geometry for narrow bores and end‑measurement tasks The compact, single‑piece design suits narrow bores and precise end‑measurements where access is limited. The slim geometry ensures compatibility with tight tolerances and enables reliable probing of recessed features. Where visual control is required, the clear, rigid shaft gives immediate tactile feedback during insertion, supporting consistent contact and more reproducible results than improvised probes or improvised tools. Traceability and straightforward workshop logistics The component is supplied as an individual test pin with a GTIN for inventory control and traceability, simplifying stock keeping and batch identification. The simple specification—diameter, pin and overall length, material and tolerance—makes it straightforward to document in inspection plans and to assign to specific gauge sets or inspection points. For procurement and application planning, Metav’s product filtration in Emmerich offers centralised availability and documented sourcing for quality‑conscious operations. Contact Metav Werkzeuge for tailored advice on integrating the M323.046 gauge pin into inspection routines or to request a supply proposal from the Emmerich stock point. Technical data Article number: M323.046 GTIN: 4061905054327 Label: Test pin, single, 0.46 mm, ±0.002 mm, pin length 40 mm, overall length 57 mm Category: Gauge pins Facts Diameter: 0.46 mm Tolerance: ±0.002 mm Pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg Special features Material: special steel Workshop version Single test pin Application: end measurements FAQ What level of accuracy does this test pin offer? The M323.046 test pin provides a ±0.002 mm tolerance, making it suitable for fine gauging and repeatable end‑measurement tasks in a workshop environment. Which materials is the pin made from and how durable is it? The pin is made from special steel, selected for everyday workshop durability while preserving dimensional stability for routine checks. Is the M323.046 suitable for narrow bore inspections? Yes, the 0.46 mm diameter and compact geometry make the M323.046 gauge pin well suited to narrow bores and recessed end‑measurements. Can the pin be used in dedicated gauge holders or jigs? The single test pin format of the M323.046 allows simple incorporation into custom jigs or holders used for repeat inspections and comparative gauging. How is the component identified for inventory and traceability? The M323.046 test pin is issued with a GTIN (4061905054327) to support inventory control and traceability in quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.47mm Test Pin Single, ±0.002mm Accuracy, 40mm Probe Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of micro‑accuracy, durable special steel construction and compact geometry for reliable end‑measurements; order the component directly via Metav Werkzeuge or consult the experts for application guidance. Gauge pin M323.047 — single precision test pin, Ø 0.47 mm, tolerance ±0.002 mm (Metav IndustryLine) The Gauge pin M323.047 is a single precision test pin designed for high‑accuracy end‑measurements and plug checking in workshop inspection and small‑part metrology. Diameter 0.47 mm, tolerance ±0.002 mm Pin length 40 mm, overall length 57 mm Special steel construction Workshop version, single pin supply Micro‑accuracy for decisive inspection results The compact design delivers measurable benefits where very small diameters matter: with a nominal diameter of 0.47 mm and a tolerance of ±0.002 mm, the pin provides reproducible reference points for fine inspection tasks. The tight tolerance reduces uncertainty in go/no‑go checks and enhances process control when verifying bore finishes, small bores or end dimensions. The geometry minimises eccentricity and, in practical applications, supports consistent contact with mating features for repeatable results. Material and mechanical integrity for workshop use Constructed from special steel, the pin withstands regular handling and offers stable surface hardness for prolonged service life in inspection routines. The pin length 40 mm and overall length 57 mm create a secure seating in common holders and inspection fixtures while keeping unwanted deflection to a minimum. The workshop execution is tailored to routine use: robust enough for daily inspection tasks yet compact for inclusion in bench kits or modular gauge sets. Practical application and compatibility in quality workflows The single‑piece design is intended for precise end‑measurements and small‑bore checks in toolrooms, production control and component verification. As a precision reference element, the component integrates directly into measuring assemblies or manual test procedures and is suitable for inclusion in gauge sets where individual pin replacement or specific diameters are required. Traceable dimensions and close tolerances support statistical process control and reduce the incidence of false rejects in serial inspections. Procurement and inventory advantages for the technical buyer Sourcing from the Metav IndustryLine provides both product consistency and logistical clarity for procurement teams. The compact form factor eases storage and logistics, while the clear specification — Ø 0.47 mm, ±0.002 mm, M323.047 — simplifies part selection for defined inspection tasks. Specification clarity shortens approval cycles and reduces the effort of matching precision pins to inspection jigs and plug gauges, supporting reliable production throughput. Contact Metav Werkzeuge for tailored inspection components and request the Metav IndustryLine M323.047 for precise end‑measurement applications; Metav Werkzeuge will advise on fitment and availability. Technical Data SKU: M323.047 GTIN: 4061905054334 Brand: Metav IndustryLine Numbers / Core Technical Data Diameter: 0.47 mm Tolerance: ±0.002 mm Pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg Special features Material: Special steel Workshop execution Single pin supply EClass: 21170231 FAQ What material is the pin made from? The gauge pin M323.047 is manufactured from special steel, selected for mechanical stability and wear resistance in routine inspection use. What are the exact dimensions and tolerance of the pin? The test pin has a nominal diameter of 0.47 mm, a pin length of 40 mm, overall length 57 mm and a tolerance of ±0.002 mm. For which inspection tasks is this pin suitable? This precision pin is intended for end‑measurements, small bore verification and plug‑gauge tasks in toolrooms and quality control stations. Is the item supplied individually or as part of a set? The product is supplied as a single precision pin under the designation M323.047. How does this pin support process control in production? The close tolerance and reproducible geometry enable consistent reference measurements, helping to reduce measurement variability and improve inspection reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.48 mm Test Pin Single, ±0.002 mm, 40 mm Pin Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.002 mm accuracy, a 0.48 mm diameter and a workshop‑grade build for reliable end‑measure checks and repeatable gauging operations; the test pin is supplied in a protective transport box for secure handling. Order the M323.048 directly via Metav Werkzeuge or consult the Metav specialists if additional advice is required. M323.048 — Workshop test pin, 0.48 mm diameter, ±0.002 mm accuracy (Metav IndustryLine) M323.048 is a workshop‑grade test pin designed for precise end‑measure checks and fine‑feature gauging in production and setup environments Workshop‑grade design for heavy use Diameter 0.48 mm with ±0.002 mm accuracy Made from special steel for wear resistance Supplied in protective transport box Precision that reduces rework and speeds inspection The compact probe offers ±0.002 mm tolerance on a 0.48 mm shaft, providing the accuracy required for tight end‑measure inspections and small‑feature checks. Thanks to the fine diameter and stable geometry, inspection sequences become more reliable, reducing repeat measurements and downstream rework. The combination of traceable tolerances and a workshop‑oriented design supports higher process yield and consistent quality control across batches. Robust materials and transport protection for everyday workshop use Manufactured from special steel, the pin balances hardness and toughness to withstand frequent handling in a production setting while maintaining contact surface integrity. Supplied in a protective transport box, the item arrives secured for transit and workshop movement, lowering the risk of damage before first use. The workshop‑grade finish makes the probe suitable for routine checks on assemblies and fixtures where durability and repeatability matter. Practical handling and integration into inspection routines The pin’s 40 mm functional length and 57 mm overall length suit a variety of gauges and fixture set‑ups common in machining and assembly shops. Its small mass facilitates quick positioning for short, repetitive inspections and contributes to minimal probe-induced deviation. Compatibility with standard gauge holders and fixture bores makes the item a convenient choice for measurement stations that require frequent verification of small bores, end faces and locating features. Request the M323.048 from Metav Werkzeuge for dependable workshop inspection tasks or contact Metav’s consultants for advice on integrating the pin into existing gauging systems — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.048 GTIN: 4061905054341 Category: Messstifte Diameter: 0.48 mm Tolerance/accuracy: ±0.002 mm Pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg Material: Special steel Version: Workshop execution Supply: Protective transport box FAQ What is the exact diameter and tolerance of this test pin? The M323.048 test pin has a diameter of 0.48 mm and an accuracy of ±0.002 mm, making it suitable for tight end‑measure checks. Which material is the pin made from and how does that affect wear? The pin is made from special steel, selected to provide a balance of hardness and resilience; this improves wear resistance for routine workshop inspections. Is the pin supplied ready for transport and storage? The item is supplied in a protective transport box to prevent damage during transit and handling; the box is intended mainly for transport protection. For which applications is this test pin best suited? This gauge pin is intended for precise end‑measure checks, small bore verification and fixture testing where a 0.48 mm probe and ±0.002 mm accuracy are required. Can the pin be used in standard gauge holders and fixtures? Yes, the pin’s dimensions and overall design allow integration with common gauge holders and fixtures used in machining and quality control stations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.49mm Test Pin Single ±0.002mm, 40mm Stem 57mm Overall Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, compact dimensions and robust workshop construction for precise end‑measurements. The 0.49 mm gauge pin with ±0.002 mm tolerance and a 40 mm pin length supports reliable reference checks in routine inspection tasks. Order the test pin directly via Metav Werkzeuge or ask the consultants for application advice. M323.049 Test pin gauge – 0.49 mm, ±0.002 mm (Metav IndustryLine) A M323.049 precision test pin designed for high‑accuracy end and reference measurements in workshop and inspection environments Precision diameter 0.49 mm, tolerance ±0.002 mm Hardened special steel construction 40 mm measuring pin length, 57 mm overall Workshop‑grade design for robust use Engineered accuracy for repeatable measurements The gauge pin delivers a 0.49 mm nominal diameter with a verified ±0.002 mm manufacturing tolerance, making it suitable for tight tolerance checks and go/no‑go reference routines. This level of accuracy reduces uncertainty in repeat measurements and supports traceable inspection traces when used as a tactile reference in quality control. The small diameter and fine tolerance allow detection of minute deviations that would be invisible with coarser gauges; the result is fewer downstream rejects and a more stable production output. Durable construction and compact handling Manufactured from special steel and supplied in a single, workshop‑oriented configuration, the pin combines wear resistance with a compact footprint. The measuring pin is 40 mm long and the total length is 57 mm, dimensions that balance accessibility into tight bores with comfortable handling. At approximately 0.003 kg, the probe is lightweight yet stiff enough to avoid flex under typical measuring forces, enabling consistent contact geometry and repeatable results over many inspection cycles. The workshop execution denotes robust finishing appropriate for daily use. Practical applications and integration into inspection workflows This precision measuring probe is intended for end‑measurements, fit checks and verification tasks where a small‑diameter reference is required. Supplied as a single test pin, it is straightforward to integrate into existing pin sets, fixture checks or bespoke gauges used on the shop floor. The compact form factor supports rapid acceptance testing and reduces setup time for serial inspections; when paired with calibrated masters or bench instruments it contributes to a documented measurement chain and improves process capability figures. For fast supply and tailored advice on using Metav IndustryLine measuring components like the M323.049, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: M323.049 GTIN: 4061905054358 Category: Messstifte Facts Nominal diameter: 0.49 mm Manufacturing tolerance: ±0.002 mm Measuring pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg Special features Material: Special steel Delivered: single test pin Workshop execution (robust finishing) ECLASS: 21170231 FAQ What accuracy can be expected from this gauge pin? The M323.049 test pin is manufactured to a tolerance of ±0.002 mm, providing high repeatability for fine‑tolerance checks in workshop inspections. Is the pin suitable for insertion into small bores and tight features? Yes, the 0.49 mm diameter and 40 mm pin length make this probe well suited to access narrow bores and detailed features for end‑measurement tasks. What material is used and how does that affect wear? The pin is made from special steel, offering improved wear resistance compared with standard tool steels; this enhances lifetime under regular inspection use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5 mm Gauge Pin, Single, ±0.001 mm Accuracy, 50 mm Length, Workshop Version - Metav IndustryLine
Combine ±0.001 mm accuracy with a 0.50 mm testing diameter and robust special steel construction for dependable micro-inspection tasks; the compact form and workshop-grade finish support repeatable results in high-throughput inspection routines. Order the M323.050 test pin directly via Metav Werkzeuge or consult the technical team if further specification is required. Test pin M323.050 — single, 0.50 mm diameter, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The Test pin M323.050 is a precisely ground inspection pin for micro-scale end‑measurements, designed for workshop environments and quality‑control stations. High precision ±0.001 mm tolerance Compact 0.50 mm diameter for micro checks 50 mm length for access to recessed features Workshop version supplied in protective case Accuracy that reduces inspection uncertainty A tolerance of ±0.001 mm positions this inspection pin in the realm of high-precision gauging. Such fine tolerance means the pin will reliably indicate dimensional deviations at the micrometre level, which is essential when assessing critical end dimensions. The narrow 0.50 mm diameter allows checks inside small bores or against fine features; combined with a calibrated manufacturing process, the result is high repeatability and fewer false rejects during routine quality control. Robust material and handling for daily workshop use Made from special steel, the inspection pin balances hardness and dimensional stability, resisting wear during repetitive contact with measured parts. The workshop version finish provides practical resilience for shop-floor conditions, while the low mass (0.003 kg) and slender geometry ease handling during rapid inspection cycles. Supplied in a protective case, the pin is kept secure during storage and transport, preserving the measuring surface and ensuring consistency from the first use. Practical applications and process benefits This inspection pin is intended for precise end‑mass checks, internal feature verification and micro-component inspection. Its geometry suits tasks where small contact diameters are required—such as alignment checks on small shafts, end‑face verification, or fixture set‑up control. By offering dependable micrometric feedback, the tool helps streamline quality workflows, reduces rework and supports faster decision making on the production line. Traceability and procurement conveniences for industry use Identifiers such as SKU M323.050 and GTIN 4061905054365 make procurement and inventory tracking straightforward within ERP systems. Supplied as a single unit, the pin integrates easily into inspection kits and fixture sets. The combination of clear identification, compact design and workshop durability supports reliable stock rotation and predictable availability for assembly or inspection teams. Contact Metav Werkzeuge for procurement advice on the M323.050 test pin or to discuss integration into existing inspection setups Technical data SKU: M323.050 GTIN: 4061905054365 Material: special steel Weight: 0.003 kg Length: 50 mm Diameter: 0.50 mm Tolerance: ±0.001 mm Facts Diameter: 0.50 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg GTIN: 4061905054365 Special features Workshop version Supplied in protective case for transport and storage Single-piece test pin Category: test pins FAQ What level of precision does this test pin offer? The M323.050 test pin provides a tolerance of ±0.001 mm, offering micrometre-level precision for sensitive inspection tasks. Which material is the pin made from and why does it matter? The pin is manufactured from special steel, chosen for dimensional stability and wear resistance suitable for repeated workshop use. Is the M323.050 suitable for checking small bores or fine features? Yes, the 0.50 mm diameter is specifically suited to micro-scale inspections and recessed features that require a narrow contact diameter. How is the test pin supplied and protected during transport? The M323.050 is supplied as a single unit in a protective case to safeguard the measuring surface during storage and transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5-1 mm Plug Gauge Set 51 Pieces, 0.01 mm Increments, Special Steel, Case - Metav IndustryLine
High-precision inspections are supported by the fine 0.01 mm graduations and a tight tolerance of ±0.002 mm, making this set ideal where repeatable dimensional checks are required; the robust special steel construction secures long-term stability. Order the gauge pin set directly via Metav Werkzeuge or consult the Metav advisors for application-specific guidance. Gauge Pin Set M318.550 – 0.50–1.00 mm, 0.01 mm steps The Gauge Pin Set M318.550 is a compact inspection kit designed for precise hole, bore and plug verification in workshop and production environments. Precision 0.01 mm increments Measuring range 0.50–1.00 mm Special steel for long service life Compact set for bench-top inspection Accurate dimensional control for production assurance The set delivers repeatable measurements thanks to the fine 0.01 mm step size and a documented accuracy of ±0.002 mm, which supports tight tolerance acceptance and in-process checks. These attributes make the kit suitable for small-bore verification, gauge matching and comparative inspection tasks in mechanical workshops and quality labs. The measurable values are easily referenced during inspection routines, reducing interpretation errors and accelerating decision-making in production control. Practical layout that speeds up inspection workflows Designed as a ready-to-use workshop kit, the pins are arranged to simplify selection and minimise handling time during batch checks. The compact form factor and organised order of sizes support efficient bench-top operations and fast verification of mating parts or drilled holes. The set format reduces the need for multiple instruments and enables quick pass/fail assessments, improving throughput in small-component assembly and maintenance tasks. Durable materials for consistent results over time Manufactured from special steel, the pins retain dimensional stability under normal workshop conditions and resist premature wear during frequent use. The material choice ensures consistent contact geometry and reliable fit results, which is essential for repeat measurements and traceable inspection records. The robust construction also reduces the frequency of replacements, offering a practical life‑cycle advantage for production and quality departments. Contact Metav Werkzeuge for tailored advice and to secure the Metav IndustryLine gauge pin set M318.550 for precise small-bore inspection and reliable workshop control Technical data Article number: M318.550 GTIN: 4054469129334 Customs tariff number: 90173000 Facts Measuring range: 0.50–1.00 mm Graduation/step: 0.01 mm Accuracy/tolerance: ±0.002 mm Pieces per set: 51 Weight: 0.9 kg Pin length: 50 mm Special features Material: Special steel Set type: Gauge pin set for plug/bore verification Application: Workshop and production inspection Format: Sequential sizes for quick selection FAQ What tolerance can be expected from this gauge pin set? The gauge pin set M318.550 is specified with an accuracy of ±0.002 mm, providing tight tolerances suitable for fine inspection tasks. Is the material suited to frequent workshop use? Yes, the pins are made from special steel, selected for dimensional stability and resistance to wear under regular bench‑top inspection routines. How are the sizes arranged for selection during checks? The set contains sequential sizes in 0.01 mm increments from 0.50 to 1.00 mm, enabling quick selection and swift go/no‑go assessments in production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5-13mm Probe Holder With Good/Reject Indication - Metav IndustryLine
Take advantage of the combination of clear pass/fail signalling, compact bench-ready dimensions and lightweight handling for faster inspection cycles; order the holder directly via Metav Werkzeuge or ask our consultants if technical details are required. Measuring pin holder M318.560 – Holder for measuring pins 0.5–13 mm with Good/Reject indication (Metav IndustryLine) A compact measuring pin holder designed to accept pins from 0.5 to 13 mm and to provide immediate visual 'Good' or 'Reject' feedback for inspection benches and production control. *Compact 113 mm length for tight setups *Compatible with measuring pins 0.5–13 mm *'Good' and 'Reject' optical marking *Lightweight 0.1 kg for easy handling Reduce inspection time with instant pass/fail feedback The holder offers clear Good / Reject signalling that speeds up routine checks and reduces decision latency on the shop floor. By providing a direct visual cue, the device supports faster sorting and fewer handling steps, which improves overall throughput. The design concentrates on pragmatic functionality: quick identification of non-conforming parts and immediate separation without additional gauges or complex readouts, improving efficiency in repetitive inspection tasks. Compact form that fits crowded benches and fixtures With a nominal length of 113 mm and a weight of 0.1 kg, the holder fits small inspection stations and can be integrated into existing jigs without obstructing neighbouring tools. The compact footprint supports ergonomic placement close to machining centres or assembly lines, reducing travel time between process steps. Its compatibility with a wide pin range means fewer different holders are required, simplifying inventory and workflow planning while maintaining repeatable handling. Reliable compatibility and simple procurement The accessory accepts measuring pins across the specified range and is delivered under the Metav IndustryLine range for traceable sourcing. Clear identification and a standard article number streamline purchasing and stock-keeping, while the compact construction maintains measurement repeatability under routine use. The solution is aimed at workshop and production environments that require robust, low-complexity components to support fast, repeatable inspection procedures. For tailored advice on integrating the M318.560 into existing inspection routines, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss delivery and compatibility. Technical data Article number: M318.560 GTIN: 4054469168241 eClass: 21170231 HS tariff number: 90173000 Facts Length: 113 mm Weight: 0.1 kg Special features Measuring pin range: 0.5–13 mm Visual 'Good' and 'Reject' indication Category: Measuring pins / Gauges FAQ What pin sizes does the holder accept? The holder accepts measuring pins in the 0.5–13 mm range as specified for the M318.560 measuring pin holder. Is the pass/fail indication mechanical or visual only? The product provides a clear visual 'Good' / 'Reject' indication suitable for rapid bench checks and sorting. Can the holder be integrated into a fixture or jig? Yes, the compact 113 mm length and lightweight design make the holder suitable for incorporation into small fixtures or inspection benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5-1mm Gauge Pin Set 51pcs 0.01mm Steps With Retainer, Supplied In Case - Metav IndustryLine
Benefit from precise, repeatable micro‑diameter checks thanks to the fine 0.01 mm graduation and the complete 51‑piece configuration; the compact pins and special steel construction ensure reliable wear resistance for frequent inspection tasks. Order the pin gauge set directly via Metav Werkzeuge or ask the consultants if additional data is required. Pin Gauge Set M318.570 — 51‑piece pin gauges, 0.5–1.0 mm range, 0.01 mm increments (Metav IndustryLine) A Pin Gauge Set M318.570 designed for high‑resolution inspection of small bores and clearance checks in precision workshops and metrology routines. 51-piece set for fine bore checking 0.5–1.0 mm range in 0.01 mm steps Special steel for wear resistance Includes practical pin holder Consistent micro‑diameter precision for production control The set provides high precision inspection in a compact format, with a fine 0.01 mm graduation that supports systematic sorting and verification of small bores. A nominal accuracy value of 0.004 mm describes the manufacturing tolerance of the pins, which translates to dependable repeatability during batch checks and reduces the risk of scrap or rework. This level of resolution is particularly valuable in micro‑component assembly and precision instrument manufacture where tight clearances determine fit and function. Complete coverage and ergonomic handling for workshop use Covering the range from 0.5–1.0 mm in uniform 0.01 mm steps, the set bundles 51 consecutive sizes to eliminate guesswork when selecting reference pins. The inclusion of a pin holder improves handling and speeds up measurement cycles while protecting the pins from accidental damage during insertion and removal. The special steel material offers enhanced wear resistance and dimensional stability under frequent use, making the set suitable for both routine shop‑floor inspection and quality‑assurance benches. Durability and repeatability that support quality workflows With a compact pin length of 50 mm and a set weight of 1.03 kg, the kit is easy to store and carry between inspection stations without compromising robustness. The systematic increments and material choice combine to deliver repeatable measurements for small bores, gauges and fittings, helping to streamline incoming inspection and in‑process checks. Ideal applications include fine mechanical workshops, electronic connector verification and toolmaking where consistent micro‑measurement is essential for product reliability. Choose Metav IndustryLine for dependable micro‑inspection: contact Metav Werkzeuge for tailored technical advice and procurement assistance Technical Data Article number: M318.570 GTIN: 4054469156163 SKU: M318.570 Set: 51 pieces Facts Measurement range: 0.5–1.0 mm Graduation: 0.01 mm Nominal accuracy: 0.004 mm Pins per set: 51 Pin length: 50 mm Weight (set): 1.03 kg Special features Material: Special steel Includes pin holder Product type: Pin gauge set EClass: 21170231 Tariff number: 90173000 FAQ What measurement range does the set cover? The set covers 0.5–1.0 mm in 0.01 mm increments, providing continuous coverage across this micro‑diameter span. How many pins are included and how are they graduated? The kit contains 51 pins, graduated in steps of 0.01 mm to allow precise incremental selection for bore and clearance checks. What material are the pins made from? Pins are manufactured from special steel, chosen for dimensional stability and improved wear resistance under frequent use. What nominal accuracy can be expected from the pins? The pins are produced with a nominal accuracy of 0.004 mm, supporting repeatable inspection results in precision workflows. Which applications suit this pin gauge set? This set is suited to fine mechanical assembly, toolmaking, connector inspection and any application requiring reliable micro‑diameter verification. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.51mm Test Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, a 0.51 mm diameter and robust workshop construction to secure repeatable end‑dimension checks. Order the pin directly via Metav Werkzeuge or contact our advisers for application guidance. M323.051 gauge pin — 0.51 mm, ±0.001 mm, 50 mm (Metav IndustryLine) The M323.051 gauge pin is a workshop‑grade inspection pin for precise end‑measure verification and tight‑tolerance plug checks in metrology and quality control applications. Workshop version for robust daily use Diameter 0.51 mm with ±0.001 mm accuracy Length 50 mm compact reach Made from special hardened steel Precision that stabilises production quality The inspection pin delivers an exceptionally fine tolerance of ±0.001 mm, making it suitable for tasks where micrometric repeatability is decisive. In small‑bore checks, tool setting and go/no‑go testing the controlled diameter reduces interpretative scatter and supports faster decision‑making in the inspection loop. The declared 0.51 mm nominal size and the tight tolerance translate directly into fewer reworks and clearer acceptance criteria for incoming or finished parts, which strengthens process reliability across batch runs. Built for workshop handling and longevity Presented in a workshop execution, the pin is manufactured from special steel chosen for wear resistance and dimensional stability under frequent handling. At 50 mm overall length the pin balances reach and stiffness, allowing confident probing in jigs and fixtures without excessive bending. The compact form factor eases storage in tool cabinets and enables straightforward use with height gauges, bore gauges and manual fixtures, while the hardened finish helps preserve the critical measuring diameter over extended service intervals. Efficient integration into inspection routines Supplied as a single precision pin with a clear product identity, the component integrates cleanly into existing inspection kits and custom jigs. The low mass and defined geometry make it easy to index or clamp for comparative checks, supporting both rapid spot checks and measured validation chains. For bespoke requirements or batch supply, Metav Werkzeuge can advise on inventory sizing and compatible measurement workflows to ensure the pin becomes a reliable element of the quality assurance chain. Contact Metav Werkzeuge for tailored supply and technical advice on the M323.051 gauge pin and its use in metrology processes. Technical data Article number: M323.051 GTIN: 4061905055164 Label: Prüfstift, einzeln, 0,51 mm, +/- 0.001 mm Länge 50 mm Facts Nominal diameter: 0.51 mm Length: 50 mm Accuracy / tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: special steel Version: workshop execution Delivery form: single inspection pin Category: gauge pins (Messstifte) FAQ What is the measurement tolerance of this pin? The pin is specified with an accuracy of ±0.001 mm, which makes it suitable for very fine end‑dimension checks and high‑precision go/no‑go tasks. Is the M323.051 suitable for fixture and jig use? Yes, the M323.051 gauge pin is designed for workshop use and its 50 mm length and hardened special‑steel construction make it appropriate for clamps, jigs and manual fixtures. How is the product supplied and identified? The item is supplied as a single inspection pin and is identified by Article number M323.051 and GTIN 4061905055164 for traceability and stock handling. Can Metav provide advice on matching the pin to measurement equipment? Technical guidance and recommendations for integration into measurement routines are available from Metav Werkzeuge; contact details are provided below. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.52mm Gauge Pin 50mm Length ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of workshop-grade construction, ±0.001 mm accuracy and a compact 50 mm shank for reliable end‑measurement and gauge checks. Order the precision gauge pin directly via Metav Werkzeuge or consult our specialists for integration advice. Gauge pin, single, 0.52 mm, ±0.001 mm (M323.052) — Metav IndustryLine workshop version The gauge pin M323.052 is a workshop‑grade precision test pin intended for high‑accuracy end‑measurement and fixture inspection in metrology and production control. Workshop‑grade execution Diameter 0.52 mm, tolerance ±0.001 mm Length 50 mm for deep reaches Made from special steel Supplied in a transport case Accuracy that secures process quality A tolerance of ±0.001 mm (1 µm) places this test pin at the upper end of tactile inspection accuracy, making it suitable where minimal deviation is critical. The fine 0.52 mm diameter combined with the tight tolerance ensures reproducible fits in gauge blocks, plug gauges and inspection fixtures. For production environments, this level of precision reduces scrap and rework by providing an objective reference for end‑measurement, so decisions about part conformity rely on measurable, repeatable data rather than estimates. Robust workshop design for daily use Built as a workshop‑grade item from special steel, the pin resists wear under frequent seating and insertion, maintaining dimensional integrity through repeated cycles. The 50 mm shank length supports measurements in deeper bores or recessed features while keeping the handling comfortable and controlled. Delivery in a secure transport case protects the ground surface during storage and transit, preserving the reference geometry and extending service life under shop conditions. Practical applications and handling benefits This single‑piece test pin is ideal for end‑measure checks, go/no‑go gauge inserts, and inspection routines in general machining and assembly workflows. Its light mass and compact form facilitate quick manual positioning and mounting in fixtures or test stands. When paired with standard gauge housings or comparators, the pin provides a reliable datum for pass/fail assessments and dimensional traceability in routine quality control. Workshop teams benefit from predictable measurement results and a simple inspection workflow based on objective criteria. For a practical evaluation of suitability and to procure the Metav IndustryLine gauge pin M323.052 for production or inspection use, contact Metav Werkzeuge in Emmerich for product advice and order coordination. Technical data Article number: M323.052 GTIN: 4061905055171 Material: Special steel Diameter: 0.52 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Brand: Metav IndustryLine Facts Accuracy: ±0.001 mm Execution: Workshop version Packaging: Supplied in transport case Special features Single test pin for end measurement Suitable for precision inspections and gauges SKU: M323.052 FAQ What level of accuracy does this gauge pin provide? The gauge pin offers ±0.001 mm accuracy, providing micrometre‑level repeatability suitable for precision inspection and end‑measurement tasks with the Metav IndustryLine test pin (M323.052). Can the pin be used in standard gauge housings and fixtures? Yes, the M323.052 is designed for integration into common gauge housings and inspection fixtures; its 0.52 mm diameter and 50 mm length suit recessed features and standard holding devices. What material is the test pin made from and how does that affect wear? Manufactured from special steel, the pin combines hardness and surface integrity to resist wear during repeated seating, helping to maintain dimensional stability under normal workshop use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.53mm Gauge Pin, Single, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
High-precision inspection with a 0.53 mm diameter and ±0.001 mm tolerance, combined with a 50 mm length and special steel for stable seating, makes this gauge pin ideal for reliable end‑measure checks; order the M323.053 directly via Metav Werkzeuge or request technical advice from our consultants. M323.053 Gauge Pin — single test pin, 0.53 mm diameter, ±0.001 mm (Metav IndustryLine) The M323.053 is a single gauge pin designed for precision end‑measurement and fixture alignment in workshop metrology, offering micrometre‑class repeatability for small bores and reference points. Exceptional ±0.001 mm tolerance Fine 0.53 mm diameter for narrow features Sturdy 50 mm length for secure seating Supplied in a transport case for protection Precision that supports repeatable inspection The core benefit of this test pin is its micrometre-level accuracy. With a ±0.001 mm tolerance the component serves as a trustworthy reference for end‑measure checks, plug gauges and alignment tasks where even minor deviations matter. The fine 0.53 mm diameter is tailored to narrow bores and small features, enabling quality control processes to rely on consistent contact geometry. In practice, this precision reduces rework and shortens corrective loops in production, because measurements taken against a stable reference point lead to better process control. Robust design for workshop conditions Built in a workshop design and manufactured from special steel, the pin resists handling and retains form under routine use. The 50 mm length provides a confident seating depth in most fixture situations without compromising handling, and the low mass supports quick manual placement. Delivery in a transport case protects the pin during storage and transit, preserving the calibrated geometry and reducing the risk of surface damage that would affect measurement repeatability. For machining shops and maintenance benches this balance of durability and fine geometry delivers dependable daily performance. Simple integration into quality workflows The single test pin complements standard inspection setups and can be used as a reference for plug gauge checks, optical comparisons and fixture pre‑setting. Marked and traceable as part of inventory, the component supports traceable inspection routines and helps shorten setup times when matching parts or verifying end‑masses. Backed by the Metav IndustryLine ethos of accessible precision, this compact reference element brings laboratory‑grade repeatability to the shop floor while remaining straightforward to handle and deploy. For micrometre‑grade end‑measurement in production environments, contact Metav Werkzeuge to secure the Metav IndustryLine M323.053 gauge pin or to discuss its fit for specific fixture and inspection tasks Technical data Article number: M323.053 GTIN: 4061905055188 Description: Gauge pin, single, 0.53 mm, ±0.001 mm, length 50 mm Brand: Metav IndustryLine Specifications Diameter: 0.53 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Features Material: special steel Workshop version Delivered in transport case Single gauge pin FAQ What is the exact diameter and tolerance of this test pin? The M323.053 gauge pin has a diameter of 0.53 mm and a tolerance of ±0.001 mm. Which material is used for the pin? The test pin is manufactured from special steel chosen for wear resistance and dimensional stability. For which applications is this gauge pin suitable? This single gauge pin is suitable for end‑measure checks, plug gauge references, fixture alignment and fine‑feature verification in workshop metrology. Is the pin delivered with protective packaging? Yes, the M323.053 is supplied in a transport case to protect the surface and ensure repeatable contact geometry. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.54mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of workshop-grade precision combined with robust construction: a 0.54 mm diameter pin with ±0.001 mm tolerance and a 50 mm length delivers reliable end-size checks and repeatable setting operations. Order directly via Metav Werkzeuge or consult our specialists for application guidance. Gauge pin M323.054 — 0.54 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The gauge pin M323.054 is a workshop-grade precision end gauge designed for dimensional verification, tool setting and fine-feature inspection in routine metrology tasks. Workshop-grade for routine inspections Diameter 0.54 mm, tolerance ±0.001 mm 50 mm length for easy handling Supplied in a transport case Accuracy engineered for repeatable checks The core advantage is the ±0.001 mm tolerance, which makes this pin suited to pass/fail gauging and fine-setting where small deviations matter. The small 0.54 mm diameter allows access to narrow bores and tight features while the controlled manufacturing keeps repeatability high across multiple checks. In practical terms, the combination of diameter and tolerance reduces setup iterations and shortens inspection cycles in production environments, supporting consistent component conformity. Robust workshop design for daily use Constructed from special steel, the pin balances wear resistance with fine surface finish to limit mating-part damage over repeated use. The 50 mm length provides a secure grip for handling and stable support in fixtures, while the low mass aids quick manual positioning. Supplied as a single, workshop-orientated unit, this design focuses on frequent use, straightforward handling and longevity under typical shopfloor conditions, delivering dependable dimensional references for assembly and verification tasks. Practical integration for quality workflows Integration into existing gauging benches and pin blocks is straightforward thanks to the standardised diameter and length; the compact form factor is ideal for in-process checks and tool-setting stations. The product supports faster decision-making during inspection and reduces rework through precise reference measurements. For traceability and procurement, the item is listed under SKU M323.054 and GTIN 4061905055195, enabling easy inventory control and replacement planning within quality systems. For routine workshop measurement rely on Metav IndustryLine’s precision—contact Metav Werkzeuge in Emmerich for supply and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.054 GTIN: 4061905055195 Label: Gauge pin, single, 0.54 mm, ±0.001 mm, length 50 mm ECLASS: 21170231 Facts Diameter: 0.54 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: special steel Workshop execution Single gauge pin for end-size checks Supplied in a transport case FAQ What is the measurement tolerance of this pin? The M323.054 gauge pin from Metav IndustryLine has a tolerance of ±0.001 mm, suitable for high-precision pass/fail checks and setting tasks. Which material is used for the pin? This gauge pin is manufactured from special steel, selected to balance surface finish and wear resistance for workshop use. What applications suit this gauge pin? The gauge pin M323.054 is intended for end-size verification, tool setting and inspection of narrow bores or small features in production and assembly workflows. Is the gauge pin supplied calibrated? No calibration certificate is specified for the M323.054 in the product data; calibration options can be arranged separately if traceable verification is required. How should the pin be handled and stored? Handle the pin by its shank to avoid contaminating the measuring surface, store it dry in its transport case and avoid contact with abrasive materials to preserve accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.55mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from workshop‑grade reliability and micrometre‑class accuracy for repeatable bore checks: the 0.55 mm diameter with a ±0.001 mm tolerance and a 50 mm working length ensure dependable end‑measurement results. Order the gauge pin directly via Metav Werkzeuge or consult their advisers for application guidance. Gauge pin M323.055 — single 0.55 mm measuring pin, ±0.001 mm tolerance (Metav IndustryLine) The Gauge pin M323.055 is a workshop‑grade measuring pin designed for precise verification of small bores and end measurements in mechanical inspection and quality control. Workshop‑grade execution Diameter 0.55 mm ±0.001 mm Length 50 mm, supplied in transport case Accurate checks for micro‑diameters and end measurements The small diameter and tight tolerance make this measuring pin ideal where repeatability is critical. With a nominal diameter of 0.55 mm and a declared ±0.001 mm variation, the pin supports fine inspection tasks such as go/no‑go verifications and precise end‑length checks. Its dimensional stability reduces measurement uncertainty in routine control plans, enabling faster decision‑making in production environments and helping to maintain acceptance criteria without time‑consuming setup changes. Robust workshop design that keeps inspection fast Built as a workshop‑grade tool from special steel, the pin combines corrosion‑resistant surface behaviour with a geometry optimised for handling and insertion. The 50 mm length gives sufficient engagement for many small‑bore applications while remaining easy to position by hand or in simple fixtures. The compact mass and slim profile minimise disturbance to delicate parts during inspection so that throughput is maintained without sacrificing accuracy. Practical supply and inventory advantages for the workshop Supplied as a single measuring pin, the item is lightweight (approx. 0.003 kg) and comes with a transport case for safe storage and movement between workstations. The compact packaging supports straightforward inventory management and clear traceability in the workshop. For systems that record component identifiers, the item can be referenced by its article number and GTIN to simplify documentation and reorder procedures. Integration into quality routines with Metav backing As part of the Metav IndustryLine range, this measuring pin benefits from the supplier’s focus on accessible precision: products are selected to bridge day‑to‑day workshop needs and industrial quality standards. The combination of a narrow nominal diameter, micrometre tolerance and a practical length reduces non‑conforming results and supports lean inspection cycles. The tool is suited to machinists, quality technicians and fixture builders who require dependable small‑bore verification without complex setup. For reliable micro‑diameter verification, order the Metav IndustryLine gauge pin (M323.055) via Metav Werkzeuge in Emmerich or contact Metav Werkzeuge for application advice at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.055 GTIN: 4061905054075 Category: Gauge pins Facts Diameter: 0.55 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: Special steel Workshop version Supplied in transport case Single measuring pin FAQ What tolerance does the gauge pin offer? The Gauge pin M323.055 (Metav IndustryLine measuring pin) has a declared tolerance of ±0.001 mm, permitting micrometre‑class acceptance checks for small bores. Which inspection tasks suit this measuring pin? This measuring pin is intended for verification of small bore diameters and end measurements in workshop and production quality control; it is particularly useful for go/no‑go checks and simple dimensional confirmations. Is the product supplied ready for use in the workshop? The M323.055 is supplied as a single measuring pin in a transport case; the product data does not indicate a calibration certificate as part of the standard delivery. Can this pin be used with fixtures or measuring stands? Yes, the slim geometry and 50 mm length make the pin compatible with simple fixtures and manual measuring setups where a single‑pin check is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.56mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of consistent micro‑precision, compact geometry and workshop‑grade robustness for reliable inline inspection and end‑of‑line checks; the combination supports faster go/no‑go decisions and reduces rework. Order the gauge pin M323.056 directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.056 — 0.56 mm diameter, ±0.001 mm tolerance (50 mm length) The gauge pin M323.056 is a workshop‑grade measuring pin designed for precise end‑measure checks and fitting verifications in assembly and inspection routines. Workshop‑grade precision design 0.56 mm diameter with ±0.001 mm accuracy 50 mm length for deep or recessed checks High micro‑accuracy for tight tolerances This measuring pin delivers micro‑accuracy where small clearances determine functionality. With a nominal diameter of 0.56 mm and a certified accuracy of ±0.001 mm, the component provides repeatable reference points for plug and end‑measure checks. The compact geometry reduces measurement uncertainty caused by leverage or deflection, so inspections and pass/fail decisions become more reliable. As a result, inspection cycles are shortened and scrap rates are reduced, supporting production efficiency in fine‑tolerance manufacturing. Robust, workshop‑ready construction Manufactured from special steel, the pin is finished for resistance to wear while maintaining the fine edge required for tight fits. The workshop‑grade execution balances durability with the dimensional stability needed in regular inspection use. Its 50 mm length allows access to recessed bores or assemblies while keeping handling straightforward; the low mass supports quick alignment and reduces operator fatigue during repetitive checks. This combination of materials and form factor suits both bench measuring and integration into gauging fixtures. Practical integration and inspection benefits As a precision measuring tool, the pin is suitable for end‑measure comparison, assembly gauging and as a reference for plug checks in small‑bore components. The gauge pin format simplifies inclusion in standard inspection kits and jigs, and its controlled tolerance reduces the need for corrective measures after first‑article inspection. Traceability is supported by the clear product identification and consistent manufacturing standard, helping maintenance of quality records and conformity checks in serial production environments. For workshop‑grade micro‑measuring from Metav IndustryLine, contact Metav Werkzeuge for tailored procurement and technical advice at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: M323.056 GTIN: 4061905054082 Label: Prüfstift, einzeln, 0,56 mm, +/- 0.001 mm Länge 50 mm Facts Diameter nominal: 0.56 mm Diameter tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: special steel Delivery: single item Execution: workshop version Application hint: end‑measure checks / gauging FAQ What is the nominal diameter and tolerance of this pin? The pin has a nominal diameter of 0.56 mm with a manufacturing tolerance of ±0.001 mm for the M323.056 gauge pin. Is the pin suitable for use in assembly gauging of small bores? Yes; the 50 mm length and compact diameter make the pin suitable for plug and end‑measure checks in small‑bore components and recessed assemblies. What material is used for the pin and how does that affect wear? The pin is made from special steel, chosen to provide balanced wear resistance while preserving dimensional stability for repeated inspection cycles. Can the pin be integrated into gauging fixtures or inspection kits? The gauge pin format and controlled tolerance allow straightforward integration into jigs, fixtures and inspection kits for repeatable reference measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.57 mm Test Pin, Single, ±0.001 mm, 50 mm Length, Workshop Version - Metav IndustryLine
Benefit from the combination of ultra-fine diameter, laboratory-grade accuracy and a compact 50 mm length for consistent end-dimension checks; order the test pin directly via Metav Werkzeuge or consult our specialists for tailored specification support. Test Pin M323.057 – Gauge Pin, 0.57 mm Diameter, ±0.001 mm (Metav IndustryLine) A Test Pin M323.057 for precise end-dimension verification and repeatable inspection tasks in workshop and small-part quality control. Precision diameter 0.57 mm Tolerance ±0.001 mm Length 50 mm for deep measurements Workshop-grade special steel High-precision measurement that reduces rework The compact gauge pin delivers precision where small deviations matter: a nominal 0.57 mm diameter with a declared ±0.001 mm tolerance translates into measurable reductions in fitment rejects and corrective machining. Because the part is produced and finished for minimal form error, the pin serves as a reliable reference in go/no-go checks and comparative gauging; this direct link between specification and result streamlines inspection routines and improves process yield. Compact form factor for confined inspection spaces With a 50 mm length and a lightweight profile, this precision pin is designed for access to narrow bores and cavities encountered in small assemblies. The short, stiff geometry reduces bending and operator-induced variance during manual handling, enabling repeatable inspection even in dense fixtures. Its workshop-oriented design suits bench measuring, plug gauges and fixture verification where space and stability are both critical. Durable material and consistent handling for everyday use Manufactured from special steel, the test pin combines wear resistance with a stable surface finish to preserve nominal dimensions over repeated cycles. The robust material choice supports frequent use in production environments and contributes to long service life, lowering replacement frequency. Traceable identification and a consistent production standard ensure that the pin integrates smoothly into calibrated inspection sets and documented quality procedures. Contact Metav Werkzeuge today for specification advice or to secure the Metav IndustryLine M323.057 for precise end-dimension control Technical Data Article number: M323.057 GTIN: 4061905054099 Label: Prüfstift, einzeln, 0,57 mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 0.57 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: Special steel Workshop version Single test pin Intended for end-dimension inspection FAQ What measurement accuracy does the pin provide? The pin is specified with an accuracy of ±0.001 mm, allowing the M323.057 to be used where micrometric control is required. Is this pin suitable for checking small bores and precision fits? Yes. The 0.57 mm diameter and compact 50 mm length make the gauge pin suitable for bore checks and small-fit verification in workshop inspection tasks. Which material is used for the pin and what are the benefits? The pin is made from special steel, chosen for wear resistance and dimensional stability during repeated use. Can the pin be integrated into fixture and gauge assemblies? The workshop-grade design and consistent geometry of this gauge pin support integration into fixture checks and comparative gauges. How is the product identified for traceability? The test pin is identified as M323.057 (GTIN 4061905054099) to support inventory and inspection traceability Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.58 mm Test Pin Single ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra-fine tolerance, compact form and robust special-steel construction for consistent inspection results; order the gauge pin directly via Metav Werkzeuge or consult our specialists for compatibility and complementary gauges. M323.058 Gauge Pin — 0.58 mm, ±0.001 mm, 50 mm (Metav IndustryLine) M323.058 is a single high-precision gauge pin designed for end-dimension checks and fits inspection in workshop and quality-control environments Single gauge pin, 0.58 mm nominal diameter Ultra-fine tolerance ±0.001 mm for precise checks 50 mm working length, special steel construction Exceptional measurement certainty for critical fits The pin delivers ±0.001 mm tolerance on a 0.58 mm nominal diameter, offering a level of precision that supports tight acceptance criteria and reduces uncertainty in go/no-go checks. Small-diameter reference pins like this are particularly valuable when verifying bore sizes, plug fits and mating features where even micrometre deviations have process impact. The combination of fine diameter and close tolerance means fewer repeat measurements and faster inspection cycles, improving throughput without sacrificing confidence in results. Robust design for repeatable inspection cycles Constructed from special steel, the pin resists wear during repeated use and maintains form stability over many cycles, which translates to repeatable measurements and less frequent replacement. The 50 mm working length provides sufficient engagement for many common bore checks while keeping handling simple. Because the geometry and material minimise elastic deformation, the pin gives a consistent reference for calibration jigs, depth checks and end-dimension gauging tasks—helping technical teams make reliable decisions faster. Simple handling and integration into inspection routines The compact, single-piece format fits into standard gauge blocks, fixture seats and manual inspection routines with minimal adaptation. Finished surfaces on the shaft ensure smooth entry into bores and reduce the risk of false readings caused by burrs or uneven contact. Lightweight yet stiff, the item is easy to position with basic tools and to clean between uses, supporting a tidy workflow in production or the metrology room. For inventories, the clear GTIN and manufacturer marking support traceability in quality documentation. For assistance in selecting complementary gauges or verifying fixture compatibility, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com — our specialists will advise on matching sets and application-specific options Technical data Article number: M323.058 GTIN: 4061905054105 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 0,58 mm, +/- 0.001 mm Länge 50 mm Numeric data Diameter: 0.58 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Measuring range: 0.58 mm Materials / Special features Material: special steel Workshop version Single item delivery High-precision tolerance class FAQ What dimensional accuracy can be expected from this gauge pin? The M323.058 gauge pin is specified at ±0.001 mm, which supports micrometre-level acceptance criteria and precise fit verification. For which inspection tasks is this pin suitable? The pin is intended for end-dimension checks, bore verification and plug-fit testing where a 0.58 mm reference is required; it is suitable for workshop and quality-control environments. What is the construction material and its benefit? Made from special steel, the pin combines surface stability and wear resistance to ensure repeatable measurements over many cycles. Is the length suitable for standard fixtures? With a 50 mm working length, the pin offers sufficient engagement for most fixture seats and gauge block setups while remaining easy to handle. How is the item supplied and identified? The product is supplied as a single gauge pin and is identified by article number M323.058 and GTIN 4061905054105 for inventory and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.59mm Test Pin Single ±0.001mm Length 50mm Workshop Style - Metav IndustryLine
Take advantage of high-precision control with a 0.59 mm diameter and ultra-fine ±0.001 mm tolerance, combined with durable special-steel construction for consistent end measurements; order directly via Metav Werkzeuge or consult the Metav team for application advice. Metav IndustryLine test pin — single gauge pin, 0.59 mm, ±0.001 mm tolerance The Metav IndustryLine test pin is a single, workshop-grade inspection pin designed for precise end measurements and fixture checks in metalworking and quality control. Single test pin 0.59 mm diameter Tolerance ±0.001 mm for high precision 50 mm overall length for reach Workshop-grade special-steel construction Repeatable accuracy for process control Precision measurement begins with stable reference tools. This inspection pin offers a diameter of 0.59 mm and a declared tolerance of ±0.001 mm, delivering repeatable results for gauging and reference tasks. The narrow tolerance reduces measurement uncertainty, which helps to lower rework rates and shortens inspection cycles. Where small-bore checks or fine fixture alignments are required, the pin’s dimensional stability provides a quantifiable basis for reliable pass/fail decisions and traceable quality control. Practical design for workshop integration Built as a single test pin in a workshop configuration, the component balances reach and handling: at 50 mm overall length it reaches into assemblies and bores while remaining easy to position in jigs or measurement fixtures. The special-steel construction enhances wear resistance under frequent use, maintaining the measuring edge longer than untreated materials. Its low mass supports quick manual handling and minimises the risk of disturbing delicate setups during inspection routines. Clear application fit and workflow benefits This inspection pin is intended for end measurements, bore verification and component alignment in machining and inspection workflows. As a precision reference it simplifies go/no-go checks, set-up verification and comparative measurements against master gauges. Integrating such a pin into a standardised checking routine increases throughput by enabling fast, dependable decisions and by reducing the need for repeated, time-consuming measurements. Contact Metav Werkzeuge today for tailored advice or to secure this Metav IndustryLine test pin (SKU M323.059) for immediate workshop use Technical data SKU: M323.059 GTIN: 4061905054112 Manufacturer: Metav IndustryLine Material: Special steel Dimensions & accuracy Diameter: 0.59 mm Measuring range min: 0.59 mm Measuring range max: 0.59 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Workshop version Single test pin Intended for end measurements Story trigger: end measurement FAQ What accuracy can be expected from this test pin? The Metav IndustryLine test pin (SKU M323.059) is specified at ±0.001 mm, providing micrometre-level accuracy for precise inspection tasks. Which materials is the pin suitable for during inspection use? The pin is manufactured from special steel, making it suitable as a dimensional reference for typical metal components during gauging and alignment operations. How is this item supplied and identified? The product is listed under SKU M323.059 and GTIN 4061905054112, enabling straightforward procurement and inventory tracking. Can this pin be used for fixture set-up and small-bore checks? Yes, the 0.59 mm diameter and 50 mm length make the pin well suited to fixture set-up, small-bore verification and precise end-measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5mm Gauge Pin Set 31pc 0.2–0.5mm Step 0.01mm Special Steel, Case - Metav IndustryLine
Take advantage of the combination of exact incremental sizing, compact handling and durable construction to streamline bore checking and process control. Order the set directly via Metav Werkzeuge or ask the consultants for application advice. Metav IndustryLine Gauge Pin Set M318.549 — 31-piece, 0.20–0.50 mm, 0.01 mm steps The Gauge Pin Set M318.549 is a precision inspection kit designed for fine bore verification and fit testing in production and quality-control workshops. 0.20–0.50 mm range with 0.01 mm steps Hardened special steel for long service life Compact case for organised transport and storage High nominal accuracy ±0.002 mm Precision where small clearances matter This gauge pin collection delivers a continuous sequence of 31 precision pins across the 0.20–0.50 mm band in 0.01 mm increments, enabling reproducible checks of small bores, reamed holes and mating parts. The nominal accuracy of ±0.002 mm establishes a clear, verifiable tolerance for pass/fail decisions and supports traceable inspection routines in small-part manufacture. The incremental spacing reduces interpolation error and speeds up determination of the closest fit, so measurement lead time is cut without compromising confidence in results. Built for routine use in demanding environments Manufactured from special steel, each pin is dimensionally stable and wear resistant, providing consistent contact geometry over repeated use. The set’s arrangement in a compact case keeps pins protected and clearly organised for quick selection, while the modest total weight of 0.5 kg makes the kit easy to handle at the bench or on the shop floor. Robust material choice and straightforward design mean minimal maintenance: occasional surface protection and correct handling preserve measurement integrity and service life. Practical applications and quality benefits This inspection kit is suited to quality control, toolroom checks and first-article inspections where small-diameter precision matters. Typical applications include verification of drilled or reamed holes, checking fit on precision dowels, and cross-referencing small-bore measurements during assembly. The graduated setup simplifies process documentation and supports consistent production decisions, contributing to reduced scrap rates and faster throughput. Supplied by Metav IndustryLine, the set brings dependable measurement capability to workshops that require repeatable, fine-resolution gauging. For confident bore inspection and compact workshop efficiency, choose the Metav IndustryLine gauge pin set M318.549 — contact Metav Werkzeuge in Emmerich for ordering and technical clarifications at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M318.549 GTIN: 4054469166971 Tariff number: 90173000 Core data Measurement range: 0.20–0.50 mm Step size: 0.01 mm Accuracy: ±0.002 mm Pieces per set: 31 Weight: 0.5 kg Pin length: 50 mm Special features Material: special steel Delivery: supplied in a protective case Configuration: graduated gauge pins for small-diameter inspection Category: Gauge pins / inspection gauges FAQ What measurement range does the set cover? The set covers a nominal range from 0.20 mm to 0.50 mm with 0.01 mm increments. How many pins are included and how are they arranged? The kit contains 31 pins arranged in a graduated sequence suitable for stepwise bore checks. What is the declared accuracy of the pins? The pins are specified with a nominal accuracy of ±0.002 mm for reliable small-diameter inspection. What material are the pins made from and how does this affect use? Pins are made from special steel, offering dimensional stability and wear resistance for repeated contact inspections. Is the set delivered in a case and is it portable? Yes, the gauge pins are supplied in a compact protective case that keeps components organised and portable. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com