Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
0.84mm Test Pin, Single, ±0.001 mm, 50 mm Length, Workshop Version - Metav IndustryLine
Take advantage of a high‑precision measuring solution that combines ±0.001 mm accuracy with a compact 0.84 mm diameter and a robust 50 mm length for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.084 — precision gauge pin 0.84 mm, ±0.001 mm (Metav IndustryLine) The Gauge pin M323.084 is a single, workshop‑grade measuring pin designed for precise end‑dimension inspections and assembly checks in metrology and production environments. Workshop-grade construction Diameter 0.84 mm, tolerance ±0.001 mm Length 50 mm for end-measurements Supplied in protective transport box Precision for repeatable end‑dimension checks The compact measuring pin delivers industrial‑grade repeatability thanks to its ±0.001 mm (1 µm) tolerance, which places it in the high‑precision band for gauge pins. A diameter of 0.84 mm provides accurate engagement in tight bores and reference holes, while the use of special steel ensures dimensional stability under normal workshop conditions. This combination reduces measurement uncertainty and supports tighter process control in inspection routines. Robust workshop design with secure handling Built as a workshop‑version item, the pin's 50 mm length gives sufficient reach for end‑face and through‑hole verification without compromising handling. Supplied as a single unit in a protective transport box, the pin arrives protected against transit damage and ready for immediate use on benches or fixtures. The compact mass of approximately 0.003 kg contributes to comfortable handling during repetitive checks and minimises the risk of accidental deflection. Improves inspection throughput and traceability Integrating a consistent small‑diameter gauge into routine checks shortens inspection time and reduces rework, supporting efficient production workflows. The M323.084 measuring pin is suitable for precision inspection steps within metrology workflows where repeatable end‑dimension verification is required. Backed by the Metav IndustryLine offering, the product benefits from a Europe‑centred quality filter that supports reliable supply for workshops and small‑scale industrial users. Contact Metav Werkzeuge to request the Metav IndustryLine M323.084 gauge pin for precise end‑dimension control; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.084 GTIN: 4061905057038 Manufacturer: Metav IndustryLine Facts Diameter: 0.84 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Workshop version Material: Special steel Supplied in transport box Single unit delivery FAQ What tolerance does this gauge pin offer? The M323.084 gauge pin offers a tolerance of ±0.001 mm (1 µm), suitable for high‑precision end‑dimension checks. What are the physical dimensions of the pin? Diameter 0.84 mm, length 50 mm, weight approx. 0.003 kg. What material is used for the pin? The pin is manufactured from special steel to provide stable dimensions for workshop use. Is this pin intended for workshop use? Yes, the product is a workshop‑version gauge pin designed for routine inspection and assembly checks. How is the product supplied and identified? Supplied as a single unit with article number M323.084 and GTIN 4061905057038. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.85mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of micro‑scale accuracy and robust workshop construction for reliable go/no‑go checks; the 0.85 mm diameter and ±0.001 mm tolerance ensure repeatable inspections, while the 50 mm working length covers a wide range of fixture and component checks. Order the M323.085 directly via Metav Werkzeuge or ask our consultants for application guidance. M323.085 gauge pin — single test pin, 0.85 mm diameter, ±0.001 mm accuracy M323.085 is a single gauge pin designed for fine dimensional verification in workshop and production metrology, suitable for precise go/no‑go testing and end‑dimension checks. Precision tolerance ±0.001 mm Diameter 0.85 mm for micro checks Full 50 mm working length Hardened special steel construction Engineered for repeatable micro‑measurements The M323.085 delivers ±0.001 mm repeatability, making it suitable for high‑precision inspection tasks where minimal deviation is critical. That tolerance level places the pin in the high‑precision range used for fine mechanical parts and quality control loops. The small 0.85 mm diameter reduces probe interference in tight bores and ensures contact points remain localised, while the 50 mm length provides enough engagement for many fixture and assembly checks. This combination reduces rework and inspection time by delivering reliable, comparable readings across multiple measurement cycles. Practical advantages that speed up inspection workflows Supplied as a single, workshop‑grade test pin, this item integrates easily into manual inspection routines and semi‑automated test jigs. The compact diameter and extended length allow the gauge to be used for internal alignment checks, depth verification and end‑dimension control without extensive fixturing. By reducing the need for frequent set‑up changes, the pin contributes to faster throughput and fewer measurement errors. The robust construction also limits deformation during repeated handling, supporting consistent results across shifts. Robust construction for everyday workshop use Manufactured from special steel, the pin resists wear and maintains its dimensional integrity in standard workshop environments. The workshop version designation denotes a balance between precision finish and practical durability for everyday use; sharp edges and contact faces are produced to preserve measurement reliability while withstanding routine handling. For customers who require traceable verification, the pin can be incorporated into documented inspection routines, ensuring that component acceptance remains transparent and auditable. Contact Metav Werkzeuge for tailored advice on integrating the M323.085 into inspection jigs or for procurement from Emmerich; our specialists will confirm suitability for specific measurement tasks and delivery options. Technical data Article number: M323.085 GTIN: 4061905054044 Category: Gauge pins Type: Single test pin Special feature: Workshop version Facts Diameter (mm): 0.85 Length (mm): 50 Tolerance (mm): ±0.001 Weight (kg): 0.003 Features / Material Material: Special steel Supply: single item Intended use: dimensional verification and go/no‑go testing FAQ What is the primary application of this gauge pin? This gauge pin (M323.085) is intended for fine dimensional verification, internal alignment checks and end‑dimension control in workshop and production inspection. Does the M323.085 require special care during use? Regular cleaning and avoidance of impact will preserve the dimensional integrity of the pin; routine visual checks are recommended to confirm contact faces remain undamaged. Is the accuracy of ±0.001 mm sufficient for laboratory tasks? The ±0.001 mm tolerance positions the pin for high‑precision workshop and many laboratory applications where micrometric repeatability is required. Can the gauge pin be used in automated jigs? Yes, the single‑piece design and 50 mm length allow straightforward integration into manual and semi‑automated jigs for go/no‑go or depth checks. What material is the pin made from and why does that matter? The pin is produced from special steel, chosen to offer wear resistance and dimensional stability under normal workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.86mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Finish - Metav IndustryLine
Benefit from a workshop-grade solution that combines micrometre-level tolerance (±0.001 mm) with a compact 0.86 mm diameter and a robust 50 mm length for consistent end-measurement checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.086 — single test pin, 0.86 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A gauge pin designed for precise dimensional verification in workshop and inspection routines, offering micrometre accuracy and a transport-friendly protective case Workshop version for regular use Diameter 0.86 mm with ±0.001 mm tolerance 50 mm length for repeatable end measurements Made from special steel for durability Repeatable small-diameter verification for production control This test pin delivers consistent dimensional checks where every micrometre matters. With a nominal diameter of 0.86 mm and a tolerance of ±0.001 mm (one micrometre), the component supports tight acceptance criteria in assembly and inspection. The compact form and low mass reduce the influence on fragile assemblies during verification, while the workshop-grade build ensures the pin withstands frequent handling. Clear numerical specifications simplify integration into quality plans and help maintain production flow with measurable repeatability. How micrometre accuracy improves process decisions A tolerance of ±0.001 mm converts directly into better process control: deviations are detected earlier and corrective actions can be taken before scrap increases. The pin is suitable for use as a reference in pin gauge stacks, for verifying bores and holes, and for checking end dimensions in small components — applications where high resolution measurement is required. Using this precision pin reduces uncertainty in go/no‑go assessments and supports traceable inspection routines that form the basis of reliable quality documentation. Durable handling, transport-safe delivery and workshop suitability Manufactured from special steel, the pin is optimised for daily inspection tasks; the workshop version balances wear resistance with practical handling. Delivery includes a protective case for safe transport and storage, ensuring the pin remains serviceable between uses. Its 50 mm length provides a firm reference for end‑measurements without excessive overhang, making it suitable for bench inspections and fixture-based checks. For serial inspection tasks, the compact dimensions and protective packaging simplify logistics and reduce downtime. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge for personalised advice and reliable supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to secure the required gauge pin. Technical Data SKU: M323.086 GTIN: 4061905054051 Label: Prüfstift, einzeln, 0,86mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 0.86 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: Spezial-Stahl (special steel) Workshop version (Werkstatt-Ausführung) Delivered in protective case for transport FAQ What is the nominal diameter and tolerance of this gauge pin? The gauge pin has a nominal diameter of 0.86 mm with a specified tolerance of ±0.001 mm, suitable for micrometre-level checks. Can the pin be used for bore and end-measurements? Yes, the M323.086 single test pin is designed for bore verification and end-measurements in small components and fixture checks. Is the pin suitable for daily workshop use? The workshop version construction and the special steel material make this pin appropriate for regular inspection tasks; it is supplied in a protective case to aid transport and storage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.87mm Test Pin, Single, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of extremely tight tolerances and compact dimensions for reliable end measurements in routine inspection and setup tasks. The combination of ±0.001 mm accuracy, a slender 0.87 mm diameter and a 50 mm usable length ensures reproducible fits and minimal measuring uncertainty. Order directly via Metav Werkzeuge or consult our specialists for selection support. Pin gauge M323.087 — 0.87 mm, ±0.001 mm, 50 mm, Metav IndustryLine A Pin gauge M323.087 designed as a workshop-grade inspection pin for precise end measurements, gauge setting and quality checks in production and maintenance environments Ø 0.87 mm precision pin Tolerance ±0.001 mm for accurate fits 50 mm length in workshop execution Special steel construction Precision that keeps parts within tolerance A slender inspection pin with a diameter of 0.87 mm and a declared ±0.001 mm tolerance is intended for tasks where microscopic deviations matter. The very fine tolerance reduces rework by providing a clear reference for fit or bore checks and supports reproducible measurements during assembly or calibration routines. The high dimensional stability of the special steel alloy ensures minimal thermal or wear-related drift, so reference checks remain dependable across repeated cycles. This level of precision suits quality control stations and setting processes where small clearances define product function. Built for everyday workshop inspection and handling The workshop-grade finish and a 50 mm usable length balance accessibility and stiffness: long enough to reach recessed features yet short enough to avoid bending under normal handling. The lightweight construction (approx. 0.003 kg) and compact form factor make the pin easy to handle during rapid inspection sequences or when fitting into gauge blocks and fixtures. Delivery in a protective transport box preserves the working surface and prevents damage between uses, which extends service life and maintains repeatability. Use as an end-measure, go/no-go plug, or in fixture alignment where repeatable contact geometry is required. Traceability and operational benefits for quality workflows Traceable identifiers such as the SKU and GTIN support inventory control and documentation in regulated environments; the robust design reduces downtime caused by uncertain reference tools. Integration into existing inspection routines is straightforward: the pin serves both as a precise reference and as a durable workshop tool, reducing the need for frequent replacements. Sourcing from Metav IndustryLine adds the reassurance of a European quality filter and logistics base in Emmerich, helping to keep measurements affordable and reliably supplied for industrial and craft applications. For a production or calibration setup that demands micrometre-level certainty, contact Metav Werkzeuge to discuss the M323.087 pin gauge and ensure the correct reference tools are selected for the intended inspection task Technical data Article number: M323.087 GTIN: 4061905054068 Category: Pin gauges / Messstifte Brand: Metav IndustryLine ECLASS: 21170231 Numerical data Diameter: 0.87 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: Special steel Workshop execution Delivery in protective transport box Label: Prüfstift, einzeln, 0,87mm, +/- 0.001 mm Länge 50 mm FAQ What measurement tasks is this pin gauge suitable for? The pin gauge M323.087 is intended for end measurements, fit checks and fixture set-up where a 0.87 mm reference with ±0.001 mm accuracy is required. Is the surface material resistant to workshop wear? Yes, the pin gauge is manufactured from special steel, offering good wear resistance for routine inspection tasks in a workshop environment. Can this pin be used for bore gauging or plug-testing? The slender diameter and tight tolerance make the M323.087 suitable as a go/no-go or reference plug for small bores and precision fixture checks. How should the pin be stored between uses? Store the pin in its protective transport box to avoid nicks or contamination of the contact surface and to maintain measurement reliability. Does the product include traceability identifiers for inventory management? Yes, the SKU M323.087 and GTIN 4061905054068 facilitate traceability and inventory control in quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.88mm Gauge Pin Length 50mm ±0.001mm Workshop Finish, Packed Case - Metav IndustryLine
A compact workshop test pin that combines a 0.88 mm nominal diameter with a confirmed ±0.001 mm tolerance and a sturdy 50 mm length gives reliable end‑measurement performance for inspection and assembly tasks; supplied in a protective transport case and made from special steel, it supports consistent quality control across production. Order via Metav Werkzeuge or consult the product specialists for application advice. Gauge pin, 0.88 mm, ±0.001 mm, 50 mm — Metav IndustryLine workshop version Gauge pin, 0.88 mm, ±0.001 mm, 50 mm is a precision end‑measurement pin designed for inspection, fit checks and small‑bore verification in workshop environments Workshop version for robust use Diameter 0.88 mm with tight tolerances Accuracy ±0.001 mm for end measurements Made from special steel, length 50 mm Precision that reduces rework and secures tolerances The gauge pin delivers an accuracy of ±0.001 mm, a level that narrows acceptance windows and reduces the need for repeat machining or manual rework. For small‑bore inspections and go/no‑go assessments, the 0.88 mm nominal diameter provides a consistent datum that is easy to incorporate into inspection jigs and gauges. The tight tolerance means measurement uncertainty is minimised, allowing process engineers to rely on these pins for routine quality checks and sample testing while maintaining production throughput. Built for everyday workshop handling The workshop execution and special steel construction ensure the pin withstands frequent use and handling typical of production floors. At a nominal length of 50 mm, the pin balances reach and rigidity: long enough for through‑hole verification, yet short enough to avoid undue bending or deflection during measurement. The small overall mass supports quick changeover and reduces operator fatigue when multiple pins are handled. Supplied in a protective transport case, the item arrives ready for safe storage and on‑bench use. Practical integration into inspection workflows Designed as a simple, robust measurement tool, the pin slips easily into comparator fixtures, plug‑gauge stacks and manual inspection routines where precise end‑measurement references are required. Its compact form factor keeps it accessible in quality boxes and tool stations, while the combination of material choice and manufacture quality helps maintain a stable gauge over repeated cycles. For process documentation or inventory, the part is identified by its SKU and GTIN in technical records and stock lists, simplifying traceability within standard metrology procedures. For consistent, workshop‑ready precision choose the Metav IndustryLine gauge pin (SKU M323.088) — order through Metav Werkzeuge or request application guidance from our product advisors at Metav Werkzeuge GmbH Technical Data Article number: M323.088 GTIN: 4061905054136 Manufacturer: Metav IndustryLine Facts Diameter: 0.88 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.003 kg Special features Workshop execution Material: special steel Protective transport case included Suitable for end measurements and fit checks FAQ What diameter and tolerance does the gauge pin have? The gauge pin has a nominal diameter of 0.88 mm and a manufacturing tolerance of ±0.001 mm. Which applications is the pin suitable for? This gauge pin is intended for end measurements, small‑bore verification, fit checks and integration into inspection jigs in workshop and light production environments. What material is used and how is it supplied? The pin is made from special steel and is supplied in a protective transport case suitable for workshop handling. How long is the pin and how does that affect use? The pin is 50 mm long, giving sufficient reach for many through‑hole and assembly checks while maintaining rigidity for reliable measurements. Is the pin traceable in stock and records? The item is identifiable by its SKU M323.088 and GTIN 4061905054136 for inventory and traceability purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.89mm Gauge Pin Length 50mm ±0.001mm Workshop Finish - Metav IndustryLine
Take advantage of high repeatability and micrometre-level tolerance in a compact format: the slim probe guarantees reliable end‑dimension checks, minimal fixture disturbance and consistent pass/fail decisions. Order directly via Metav Werkzeuge or consult our technical advisors for application support. Test Pin M323.089 — Precision probe 0.89 mm, ±0.001 mm A Test Pin M323.089 for fine end‑measurement and fixture verification in workshop and metrology environments, designed as a robust workshop version for frequent use. High precision ±0.001 mm tolerance Diameter 0.89 mm for fine probing 50 mm overall length, slim profile Special steel for wear resistance Precision where micrometres matter The probe delivers ±0.001 mm accuracy, equivalent to 1 µm, which makes it suitable for tasks that require micron‑level certainty such as end‑dimension verification and small‑bore inspection. Manufactured in a workshop version, the probe balances durability with a slim geometry that reduces contact disturbance during measuring. The small 0.89 mm diameter allows access to tight features while the 50 mm length provides sufficient reach without compromising stiffness. This combination supports faster decision cycles on the shop floor and reduces the likelihood of rework through clearer pass/fail results. Robust design for repetitive workshop use Constructed from special steel, the probe is intended for continuous handling and repeated contact with gauging fixtures. The material choice improves wear resistance and maintains tip form over many cycles, preserving the original measurement behaviour. As a single probe with a precise ±0.001 mm specification, it fits into fixture arrays, test benches and bespoke locating tools where consistent contact geometry is essential. The lightweight nature (approx. 0.003 kg) makes integration into automated or semi‑automated holders straightforward and minimises additional inertia on delicate positioning stages. Practical benefits for quality assurance workflows Using a fine probe like this reduces measurement uncertainty at critical control points and supports traceable inspection routines. The slim probe aids in checking end faces, small bores and precision features without the need for larger, more invasive instruments. Its repeatable contact geometry helps standardise measurement routines across operators and shifts, improving statistical process control figures and supporting quicker root‑cause analysis when deviations occur. For organisations looking to centralise metrology supply chain decisions, the probe is a compact, reliable component that complements gauges and inspection fixtures. For application advice or to secure supply from Metav Werkzeuge, contact our technical team and specify the M323.089 for tailored recommendations and rapid delivery. Technical data Article number: M323.089 GTIN: 4061905054938 Manufacturer: Metav IndustryLine Facts Diameter: 0.89 mm Length: 50 mm Tolerance/accuracy: ±0.001 mm Weight: 0.003 kg Special features Material: Special steel Version: Workshop execution Intended use: End‑dimension checks and fixture probing FAQ What tolerances can be expected when using this test pin? The test pin M323.089 from Metav IndustryLine is specified with a tolerance of ±0.001 mm, providing micrometre‑level repeatability for precise end‑measurement tasks. Is the probe suitable for integration into existing fixture plates? Yes, the probe’s 0.89 mm diameter and 50 mm length make it compatible with common fixture arrays and test bench holders where fine probing is required. What material is the pin made from and how does that affect wear? The probe is made of special steel, chosen to improve wear resistance and preserve tip geometry under frequent contact, supporting long service life in workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.8mm Gauge Pin 50mm Length, ±0.001 mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine accuracy, compact micro sizing and robust workshop design to ensure reproducible end‑measurements; order the Test pin directly via Metav Werkzeuge or contact our consultants for application advice. Test pin M323.080 — measuring pin, 0.80 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) The Test pin M323.080 is a workshop‑grade measuring pin designed for precise end‑measurements and gauging tasks in finely machined components. Diameter 0.80 mm for tight fits Tolerance ±0.001 mm for micrometre accuracy Length 50 mm in workshop execution Made from special steel for durability Micrometre‑level repeatability for fine parts The compact measuring pin delivers a ±0.001 mm tolerance, equivalent to one micrometre, which makes it suitable where minimal deviation is critical. With a shaft diameter of 0.80 mm, the pin is optimised for tight bores, pin gauges and verification of end‑dimensions. The very small diameter combined with the high accuracy reduces measurement uncertainty when used in calibrated fixtures or gauge blocks, supporting traceable inspection steps in workshop and quality environments. Robust workshop construction that endures routine use Constructed from special steel in a workshop execution, the design balances hardness with surface finish to resist wear during repeated seating operations. The 50 mm active length provides enough engagement for stable measurements while remaining easy to handle and position. Low mass and stable geometry ensure consistent contact behaviour, which helps to maintain reproducibility in serial checks and during comparative gauging tasks. Compact handling and safe transport for frequent use Classified as a micro‑class measuring instrument (max. range 10–100 mm), the pin suits delicate assembly, watchmaking and small‑part inspection where space is limited. Supplied in a protective transport case, the unit is easy to store and move between workstations without risk of accidental damage. As a single‑piece measuring element, it integrates simply into existing fixtures, calliper adaptors or dedicated gauge holders to support fast, reliable end‑measurements. Request supply and technical advice from Metav Werkzeuge for this Metav IndustryLine measuring pin M323.080 — contact info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance Technical data SKU: M323.080 GTIN: 4061905056994 Brand: Metav IndustryLine Dimensions & accuracy Diameter: 0.80 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.003 kg Special features Material: Special steel Workshop execution (Werkstatt‑Ausführung) Supplied in transport case Intended use: end‑measurements / gauge applications FAQ What level of accuracy does this measuring pin offer? The Test pin M323.080 offers an accuracy of ±0.001 mm, providing micrometre‑level precision suitable for fine gauging and end‑measurement tasks. Is the measuring pin suitable for tiny bore gauges and watch components? Yes, the 0.80 mm diameter and micro‑class sizing make the pin well suited to small bores, watch parts and other compact assemblies. What material is the pin made from and why does that matter? The pin is made from special steel; this provides a durable contact surface and consistent geometry, which supports repeatable measurements in workshop conditions. How is the pin delivered to ensure safe handling? The measuring pin is supplied in a protective transport case to prevent damage during storage and transfer between workstations. Can the measuring pin be used with standard gauge holders and fixtures? The measuring pin is designed for integration with common fixtures and gauge adaptors used for end‑measurements and comparative checks in production and inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.91mm Gauge Pin Length 50 mm ±0.001mm Workshop Finish - Metav IndustryLine
Compact, micrometric control meets robust workshop use: with a 0.91 mm diameter and ±0.001 mm tolerance, this single test pin delivers repeatable end‑measurements and dependable setting work. Order directly via Metav Werkzeuge or consult our specialists for application support. M323.091 Gauge pin — 0.91 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The M323.091 is a precision gauge pin for end‑measurement, setting and inspection tasks in workshop and production environments, supplied as a single hardened test pin for stable seating and repeatable checks. Diameter 0.91 mm with ±0.001 mm accuracy Length 50 mm for stable engagement Made from special steel for durability Workshop version for everyday use Achieve micron-level certainty in end measurements A compact measuring element with a nominal diameter of 0.91 mm, the test pin offers a tolerance of ±0.001 mm (1 µm), enabling high‑precision end measurements and calibration tasks where tight clearances matter. The fine tolerance reduces measurement variation and increases confidence when checking small bores, end stops or reference surfaces. In practice, the narrow diameter combined with such tight deviation permits consistent repeatability, lowering the risk of false rejections and streamlining inspection workflows. Robust construction for repeated workshop use Manufactured from special steel, the pin balances wear resistance with dimensional stability so that routine handling and repeated seating do not compromise form or function. The 50 mm overall length provides sufficient contact depth for secure engagement in fixtures and gauges while remaining convenient for manual handling or insertion into measurement setups. As a single‑piece test pin in a workshop specification, it is optimised for day‑to‑day use where reliability and longevity cut down on downtime and spare‑part turnover. Practical benefits for quality assurance and process setup Using this pin as a reference or setting gauge simplifies alignment and fixturing tasks and shortens setup time on production equipment. The compact format makes it suitable for close‑tolerance assemblies and micro‑components where space is restricted but accuracy is non‑negotiable. Supplied under the Metav IndustryLine label, the product aligns with a broader promise of accessible precision: consistent parts, traceable identification and dependable sourcing from a European quality filter. Choose the Metav IndustryLine M323.091 for micron‑accurate end measurements and contact Metav Werkzeuge for tailored advice or ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.091 GTIN: 4061905054952 Manufacturer: Metav IndustryLine Facts Diameter: 0.91 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: special steel Single test pin Workshop version Story trigger: end measurements FAQ What is the measurement tolerance of this gauge pin? The M323.091 gauge pin is specified to ±0.001 mm, making it suitable for micrometric end‑measurements and precision setting tasks. Can this pin be used for bore checking and fixture alignment? Yes. The single‑piece design and 50 mm length allow secure engagement for bore checks, fixture setting and reference positioning in inspection operations. What material is the pin made from and how does that affect durability? The pin is made from special steel, chosen for a balance of hardness and wear resistance so that dimensional stability is maintained during repeated use. Is the M323.091 traceable for quality documentation? The product carries a GTIN (4061905054952) and is supplied under the Metav IndustryLine portfolio for consistent sourcing and traceability in production records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.92mm Gauge Pin Length 50mm ±0.001mm Workshop Finish - Metav IndustryLine
Take advantage of ±0.001 mm tolerance together with a slim 0.92 mm diameter and a 50 mm working length for reliable end‑measure checks; the workshop-grade construction and special steel ensure repeatable results. Order the gauge pin directly via Metav Werkzeuge or consult the Metav specialists for application advice. Gauge pin M323.092 — 0.92 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) The gauge pin M323.092 is a single, workshop-grade test pin for precise end‑measure verification and small‑feature gauging in inspection and assembly operations ±0.001 mm tolerance for high-precision checks 0.92 mm diameter for fine-feature measurement 50 mm hardened special steel length Workshop execution for robust daily use Consistent end-measure accuracy for quality control The slim measuring shaft is manufactured for end‑measure tasks where repeatability is essential. With a stated tolerance of ±0.001 mm, the pin supports fine inspection steps such as plug‑gauge cross checks and go/no‑go verification of small bores or features. The tight tolerance reduces measurement uncertainty and shortens corrective loops in production control, helping to maintain a stable process capability without extensive adjustment or compensating procedures. Robust construction to withstand workshop routines A special steel composition and a 50 mm working length combine to provide wear resistance and dimensional stability during frequent handling. The workshop execution design prioritises practical robustness while keeping the probe slender enough for confined features. The compact mass and balanced form enable steady contact in manual gauging setups and contribute to long service life under typical machining‑shop conditions. Practical integration and traceability in inspection workflows The pin is supplied as a single test item with a clear article reference for inventory and traceability. The compact geometry suits end‑measure checks, bench inspection jigs and small‑feature verification tasks. Identification by SKU and GTIN simplifies stock management and order replenishment, allowing seamless integration into existing quality routines and parts lists. For precision end‑measure verification, trust the Metav IndustryLine quality — contact Metav Werkzeuge for procurement and technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.092 GTIN: 4061905054969 Eclass: 21170231 Brand: Metav IndustryLine Category: Gauge pins Facts Diameter: 0.92 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: Special steel Workshop execution Supplied as a single test pin Intended for end‑measure checks FAQ What applications suit this gauge pin? The gauge pin M323.092 is intended for end‑measure verification and small‑feature gauging in inspection, assembly and bench inspection workflows. Is the diameter and tolerance suitable for fine bores? Yes. The 0.92 mm diameter combined with a ±0.001 mm tolerance makes the M323.092 suitable for precise checks of fine bores and small mechanical features. What material is used for the pin? The shaft is made from special steel, providing wear resistance and dimensional stability for routine workshop use. How is the item identified for ordering and stock control? Order and identify the part by Article number M323.092 or GTIN 4061905054969 for reliable procurement and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.93mm Gauge Pin Length 50mm ±0.001mm Workshop Finish, Special Steel - Metav IndustryLine
Take advantage of the 0.93 mm diameter and ±0.001 mm tolerance for reliable end‑dimension checks; the compact 50 mm length and workshop‑grade construction ensure fast, repeatable inspection at the bench. Order the gauge pin directly via Metav Werkzeuge or contact their consultants for technical advice. Gauge pin M323.093 — single gauge pin, 0.93 mm diameter, ±0.001 mm tolerance The gauge pin M323.093 is a single‑piece checking pin intended for high‑precision bore and end‑dimension inspection in workshop and small‑parts metrology. Workshop-grade design Diameter 0.93 mm Tolerance ±0.001 mm Length 50 mm Engineered for repeatable end‑dimension checks The small nominal diameter of 0.93 mm combined with a tolerance of ±0.001 mm provides high‑precision verification where tight fits and fine bores are involved. In practical terms, this means a single insertion offers an immediate assessment of bore conformity and end dimensions without complex set‑ups. The tight tolerance supports comparative and go/no‑go assessment routines commonly used in quality control, helping to pinpoint deviations early in the production chain and reducing rework. Practical design for workshop inspection Manufactured in special steel and finished for workshop use, the pin’s 50 mm length gives sufficient reach for short bores and end measurements while remaining easy to handle. The compact form suits bench inspection and manual gauging tasks where rapid, repeatable checks are required. The workshop‑grade execution balances robustness with the fine surface finish needed to avoid false readings caused by damage or contamination. Integration into inspection workflows As a single gauge pin, the M323.093 is suitable for inclusion in plug gauge sets, fixture checks and small‑part inspection jigs. The item’s compact dimensions make it compatible with precision holders and comparator fixtures used in metrology departments. Used correctly, the pin contributes to repeatable measurements that support process control, statistical sampling and routine acceptance testing in toolmaking and precision engineering. Handling and maintenance for consistent results To preserve accuracy, the pin should be cleaned of debris and light oils prior to use and handled with care to avoid nicks or dents; simple protective storage after inspection will prolong service life. Regular visual checks are sufficient for everyday use; for formal traceability or certification, request calibration options from Metav Werkzeuge. Proper handling ensures consistent results and reduces the risk of measurement uncertainty in successive checks. Request a technical consultation or quotation from Metav Werkzeuge to integrate the M323.093 gauge pin into inspection protocols and ensure optimal application in the workshop Technical Data Article number: M323.093 GTIN: 4061905054976 ECLASS: 21170231 Facts Diameter: 0.93 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: special steel Workshop execution Single gauge pin Label: Prüfstift, single, 0.93 mm FAQ What applications suit this gauge pin? This gauge pin is intended for precise bore checks and end‑dimension inspection in toolmaking, small‑parts metrology and workshop quality control; the M323.093 is optimised for fine bores. Is the material corrosion resistant? The pin is made from special steel with a workshop finish; corrosion resistance depends on the alloy and local conditions—recommended to dry and lightly oil after use if required. Can the pin be used in a comparator fixture? Yes—the compact dimensions and consistent tolerance make the pin suitable for comparator fixtures, plug gauge sets and bespoke inspection jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.94mm Gauge Pin Length 50mm ±0.001mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of workshop-grade accuracy and compact design for consistent end‑measure checks: the pin's 0.94 mm diameter with ±0.001 mm tolerance and 50 mm length ensures repeatable positioning and tight fit inspections. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for specification matching. Gauge pin M323.094 — 0.94 mm diameter, ±0.001 mm, 50 mm length The gauge pin M323.094 is a single, workshop‑grade precision plug gauge for end‑dimension verification and fixture alignment in machine shops and quality control benches Workshop‑grade precision pin Diameter 0.94 mm with ±0.001 mm tolerance Compact 50 mm length for fixture checks Made from special steel for wear resistance Consistent, measurable accuracy for production control A core benefit of this precision pin is its extremely tight tolerance: ±0.001 mm. That level of repeatability converts directly into fewer false rejects and more reliable go/no‑go decisions on the shop floor. The slim 0.94 mm diameter is ideal for verifying small bores, end‑faces and plug gauges; by using a controlled plug rather than approximate gauging, process capability and traceability are improved. The numeric tolerance stated is an objective specification that supports statistical process control and helps reduce downstream rework. Practical design that suits workshop handling and fixtures Engineered as a workshop‑grade component, the pin combines a hardened surface with a compact 50 mm shank to fit in tight jigs and alignment tools. Its small mass (approx. 0.003 kg) and straight geometry make it easy to handle while retaining sufficient stiffness for repeatable measurements. The special steel construction increases wear resistance in frequent use, extending service life under normal production conditions. The simple single‑pin format also allows integration into bespoke fixture sets or replacement of worn elements without overhaul of tooling. Clear specifications to streamline quality routines Specifications are presented as direct, verifiable data to support purchasing and inspection planning: nominal diameter, measured tolerance and length are defined, enabling immediate comparison with inspection requirements. The compact format suits use as an end‑dimension master, plug check or positional reference in assembly processes. For customers seeking integration into measurement documentation, the SKU and GTIN are provided in the technical details below to simplify inventory and traceability. For precision that matches workshop realities, contact Metav Werkzeuge in Emmerich for ordering and technical matching of the Metav IndustryLine range; advisors can clarify compatibility with existing gauges and fixtures Technical data Article number: M323.094 GTIN: 4061905054983 Manufacturer: Metav IndustryLine Facts Diameter: 0.94 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.003 kg Special features Workshop‑grade execution Material: special steel Single gauge pin Category: gauge pins SKU: M323.094 FAQ What tolerance does the pin offer? The pin provides a tolerance of ±0.001 mm, ensuring very tight repeatability for end‑measure checks with the gauge pin M323.094 from Metav IndustryLine. For which applications is this pin suited? It is suited to small‑bore verification, end‑dimension masters, fixture alignment and plug gauge checks where a 0.94 mm reference is required. Is the pin suitable for frequent workshop use? Yes. The special steel construction and workshop‑grade design make the pin appropriate for regular use in production and quality control settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.95mm Test Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, tight tolerance and a robust workshop design to secure reliable end‑measure checks. The compact 50 mm length and 0.95 mm diameter provide efficient access into small bores and gauges; order directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.095 — precision test pin, 0.95 mm, ±0.001 mm (Metav IndustryLine) A gauge pin M323.095 designed for accurate end‑measure verification and alignment checks in workshop metrology, supplied as a single precision pin for component inspection and fixture testing Diameter 0.95 mm, workshop version Tolerance ±0.001 mm for reliable checking Length 50 mm for small‑part access Special steel construction for durability Consistent fit control with micrometric accuracy The small‑diameter gauge pin is engineered to deliver ±0.001 mm repeatability, which reduces ambiguity when verifying mating bores or end dimensions. The narrow 0.95 mm shaft allows entry into compact features where standard pins cannot reach, while the moderate 50 mm length ensures stable support during insertion. This combination translates into dependable go/no‑go assessments and fewer rework cycles in precision assembly. Robust workshop design for frequent use Constructed from special steel, the pin withstands routine handling and resists distortion under normal workshop conditions. The workshop version means the geometry and surface treatment are optimised for repeated manual use, maintaining measurement integrity over many cycles. That durability supports predictable inspection intervals and lowers total cost of ownership for quality control equipment. Easy integration into inspection jigs and fixtures The compact geometry and standardised sizing make the pin straightforward to incorporate into check fixtures and manual gauges. Its nominal diameter and tight tolerance provide a clear reference for alignment tasks, enabling quick visual or tactile pass/fail judgements during setup. The small mass also minimises inertial effects when inserting multiple pins in sequence, improving throughput in batch inspection. Practical benefits for small‑part measurement workflows Use of this precision pin reduces setup uncertainty for small components, supporting faster decision making on the shop floor. The single‑piece supply suits selective replacement strategies—keeping spares at hand avoids production pauses. In short, the tool is a focused solution for end‑measure verification where fine resolution and compact form are necessary. Contact Metav Werkzeuge today for application guidance and fast delivery from Emmerich — request the M323.095 precision gauge pin for reliable small‑part checks Technical Data Article number: M323.095 GTIN: 4061905054990 Label: Prüfstift, einzeln, 0,95mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 0.95 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: Special steel Workshop version Single delivery Accuracy class: ±0.001 mm FAQ What inspection tasks is this gauge pin suited for? This gauge pin is intended for end‑measure verification, alignment checks and entry into narrow bores where a 0.95 mm reference is required; it is particularly useful in precision assembly and fixture testing. Is the tolerance of ±0.001 mm sufficient for tool setting and gauge blocks? Yes, the ±0.001 mm tolerance of the M323.095 offers micrometric control suitable for high‑precision fit checks and many tool‑setting applications where fine resolution is needed. What material is the pin made from and how does that affect wear? The pin is manufactured from special steel, chosen to balance hardness and toughness for prolonged workshop use; this enhances wear resistance during repetitive insertion tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.96mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
High‑precision workshop gauge offers repeatable end‑measure checks thanks to a tolerance of ±0.001 mm and a compact Ø 0.96 mm profile; the 50 mm length provides reliable access to recessed features. Order directly via Metav Werkzeuge or request application advice from the technical consultants for tailored guidance. Test pin M323.096 — workshop test pin, Ø 0.96 mm, ±0.001 mm accuracy (Metav IndustryLine) Test pin M323.096 is a workshop‑grade precision gauge pin designed for repeatable end‑measure checks and fixture verification in production and inspection environments Workshop-grade precision pin Ø 0.96 mm ±0.001 mm 50 mm length for recessed or end‑measure checks Manufactured from special steel for wear resistance Single-piece gauge for fixture and inspection use Engineered for consistent, high-precision measurements The M323.096 test pin is manufactured to deliver high‑precision results with a guaranteed tolerance of ±0.001 mm, making it suitable for end‑measure and plug‑gauge tasks where micrometre‑level repeatability is required. The small Ø 0.96 mm diameter reduces the influence of surface irregularities and allows measurement of narrow bores or fine features. Precision production and careful material selection reduce runout and ensure that every contact point behaves predictably, which improves statistical process control and reduces downstream rework. Fits into inspection jigs and gauges with minimal adaptation At a 50 mm active length and in a single‑piece configuration, this gauge pin integrates easily into existing fixtures, plug gauges and comparison rigs. The compact form factor supports tight pitch layouts on fixture plates and enables probing of recessed seats without additional extensions. Using a dedicated gauge pin rather than improvised probes simplifies setup validation and improves throughput because measurement steps remain short and reproducible, supporting faster cycle times in routine quality checks. Workshop durability and practical traceability for production use Constructed from special steel, the pin combines wear resistance with stable dimensional behaviour under normal workshop conditions. The workshop‑grade execution balances toughness and surface finish so that contact wear is predictable across batches of parts. Metav’s offering emphasises reliable supply and industry experience, rooted in a pragmatic approach to precision: broad product availability and a quality‑focused distribution centre in Emmerich help maintain continuity in production environments. For application clarification, the technical consultants at Metav Werkzeuge provide specification support and integration advice. Contact Metav Werkzeuge for technical guidance and to request the M323.096 test pin for precision end‑measure inspections Technical data Article number: M323.096 GTIN: 4061905055003 Brand: Metav IndustryLine Material: Spezial‑Stahl Length: 50 mm Facts Diameter: 0.96 mm Tolerance: ±0.001 mm Weight: 0.003 kg SKU: M323.096 Special features Workshop‑grade design Single test pin Suitable for end‑measure checks Compact profile for narrow bores FAQ What tolerance is offered on the test pin? The test pin is manufactured with a tolerance of ±0.001 mm, providing micrometre‑level repeatability suitable for precision end‑measure applications. Is the M323.096 pin suitable for recessed or hard‑to‑reach features? Yes. With a 50 mm active length and a compact Ø 0.96 mm profile, the pin is intended for recessed seats and narrow features in inspection fixtures. What material is the gauge pin made from? The gauge pin is produced from special steel, chosen for wear resistance and dimensional stability under normal workshop conditions. Is the pin supplied as an individual item or as part of a set? This item is supplied as a single test pin; the designation indicates an individual gauge component for fixture or inspection use. Can the pin be used in production gauges and jigs? The single‑piece configuration and workshop design make the pin suitable for incorporation into production jigs, plug gauges and test fixtures where repeatable contact geometry is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.97mm Test Pin Length 50mm, ±0.001mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial robustness, ±0.001 mm precision and compact handling for reliable end‑measurement tasks; the pin is supplied in a protective transport box ready for workshop use. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin M323.097 – Single precision gauge pin, Ø 0.97 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A Test pin M323.097 designed for precision end‑measurements and fixture checks in workshop and quality‑control environments. Precision tolerance ±0.001 mm Diameter 0.97 mm for fine measurements 50 mm length for secure probing Workshop version in protective transport box Reliability that reduces rework and inspection uncertainty With a declared tolerance of ±0.001 mm, this gauge pin meets the demands of tight inspection tolerances where repeatability matters. The small diameter of 0.97 mm is tailored for fine end‑measurements, plug gauges and feeler applications where minimal play and stable contact are required. Specifying such a narrow error band significantly reduces uncertainty in Go/No‑Go checks and stack‑up verifications, which in turn lowers the risk of costly rework further down the production chain. The numerical precision of the pin converts directly into measurable process benefits: fewer rejects, faster decisions at the inspection station and consistent reference points for routine quality control. Built for everyday workshop handling and secure storage Manufactured in special steel, the pin is a workshop version intended to withstand frequent handling and to resist local wear on the contact tip. The 50 mm shank length provides good engagement in probe holders and receptacles while remaining easy to manoeuvre by hand or with light tooling. Supplied in a protective transport box, the pin arrives ready for safe storage and transit; the packaging keeps the contact geometry intact during movement between bench, fixture or transport. The low individual mass of 0.003 kg makes the pin negligible in terms of added inertia in test fixtures, but the material choice preserves surface quality for longer service intervals. Simple integration into inspection and assembly workflows Traceable identifiers such as the SKU and GTIN enable straightforward documentation in inventory and inspection records; the compact form factor suits fixture assemblies and end‑of‑line verification points alike. The pin performs well as a reference element for small‑bore checks, alignment gauges and dimensional spot checks where high local accuracy is required. For automated measurement cells, the pin’s repeatable geometry supports consistent contact conditions; for manual inspections it supplies a reliable datum for comparative testing. Documentation and compatibility details can be matched to existing fixtures to ensure the pin integrates without modification. For consistent end‑measurement performance order the Metav IndustryLine Test pin M323.097 via Metav Werkzeuge in Emmerich or contact our specialists for specification advice and delivery options. Technical data SKU: M323.097 GTIN: 4061905055010 eClass: 21170231 Diameter: 0.97 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Material: special steel Workshop execution Supplied in protective transport box Category: Gauge pins FAQ What is the exact diameter and tolerance of the pin? The Test pin M323.097 has a diameter of 0.97 mm and a tolerance of ±0.001 mm. Which material is used for this gauge pin? The Test pin M323.097 is manufactured from special steel for improved wear resistance in workshop use. Is the pin suitable for use in small‑bore inspection fixtures? Yes, the M323.097 single gauge pin is designed for fine end‑measurements and fits small‑bore fixtures and probe holders. How is the pin delivered and protected during transport? Delivery includes a protective transport box to keep the contact geometry secure during transit and storage. Can the pin be used as a reference in comparative Go/No‑Go checks? The M323.097’s precision tolerance and stable geometry make it suitable as a reference element in comparative checks and inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.98mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Finish - Metav IndustryLine
Take advantage of the combination of pinpoint accuracy, robust workshop design and compact handling for reliable inspection routines; ideal for repeatable end‑measurements and fixture checks. Order the test pin directly via Metav Werkzeuge or consult the Metav team for technical guidance. Test pin M323.098 — precision gauge pin, 0.98 mm diameter, ±0.001 mm tolerance Test pin M323.098 offering a compact, workshop-ready solution for fine gauging and end-measurement tasks across inspection benches and assembly jigs High precision ±0.001 mm tolerance Diameter 0.98 mm for fine gauging 50 mm length for accurate depth checks Repeatable precision where micrometres are impractical This inspection mandrel delivers high precision in a compact format: a nominal diameter of 0.98 mm with a guaranteed tolerance of ±0.001 mm. Such tolerance places the component in the category of precision gauge pins used for dimensional verification of small bores and fit checks where sub‑millimetre accuracy is essential. Constructed from special steel, the pin offers consistent thermal and mechanical behaviour during short measurement cycles, supporting repeatable results on bench comparators and manual gauging fixtures. The specification supports clear decision‑making in quality control and reduces rework caused by ambiguous fit results. Practical design for workshop and inspection use The pin’s 50 mm length provides access into recesses and through-holes while remaining easy to handle on the shop floor; its lightweight character (approx. 0.003 kg) minimises operator fatigue during repetitive checks. The workshop version finish prioritises durability for everyday use and straightforward cleaning between shifts. Supplied as a single item, the component integrates seamlessly into existing go/no‑go sets, plug gauge nests or bespoke checking rigs; marked identification (SKU M323.098) and the included GTIN 4061905055027 simplify inventory and traceability workflows. Integration into measurement routines and process control As a dedicated gauge element, the pin is suitable for end‑measurements, reference checks and fixture validation where compact diameters are required. The stable geometry and narrow tolerance make the part well suited to comparative checks against master rings or as a reference when setting up micro‑drilling operations. The robust material choice and simple geometry reduce sources of error, supporting faster inspection throughput and clear conformity assessments. The component’s specification facilitates documentation in quality records and supports consistent process control across production batches. For workshop-ready precision from Metav IndustryLine, request the M323.098 test pin via Metav Werkzeuge to receive tailored technical advice and reliable supply from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M323.098 GTIN: 4061905055027 SKU: M323.098 Facts Diameter: 0.98 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Workshop version Material: special steel Single item delivery Application: end measurements / fit checking FAQ What tolerance can be expected from this gauge pin? The supplied test pin M323.098 is manufactured to a tolerance of ±0.001 mm, suitable for high‑precision gauging tasks and tight fit assessments. Which materials is the pin made from and how does that affect use? The pin is made of special steel, offering stable mechanical properties and wear resistance appropriate for regular inspection use in a workshop environment. Can the pin be used for bore verification and fixture alignment? Yes — the gauge pin’s 0.98 mm diameter and 50 mm length make it suitable for bore verification, end‑measurement checks and alignment tasks in small‑scale fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.99mm Test Pin, Single, ±0.001 mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from the combination of ±0.001 mm high accuracy, an ultra-slim 0.99 mm diameter and a robust workshop design for dependable end-measurements; order the gauge pin directly via Metav Werkzeuge or consult their specialists for application-specific advice. Gauge pin M323.099 – single 0.99 mm, ±0.001 mm accuracy (Metav IndustryLine) Gauge pin M323.099 is a precision measurement pin for end and fit checks in workshop environments, supplied as a single 50 mm length unit. 0.99 mm precision diameter, tolerance ±0.001 50 mm length for deep reach measurements Made from special steel for wear resistance Delivered in protective transport case Faster inspection through sub-micron repeatability The pin delivers ±0.001 mm tolerance, enabling highly consistent pass/fail checks and dimensional verification that reduce rework and inspection time. With a 0.99 mm diameter, the pin is suited to small-bore and fine-feature checks where conventional gauges struggle; the narrow profile minimises disturbance in tight fits and ensures repeatable seating. The precision tolerance is presented as an objective measurement parameter, supporting statistically sound quality control and permitting tighter control limits on production runs. Built for everyday workshop resilience Engineered as a workshop version, the pin is manufactured from special steel to resist wear under frequent use, preserving the gauge geometry and helping to maintain measurement integrity over time. The 50 mm length provides sufficient reach for many end-measurement tasks without compromising rigidity, and the single-piece supply simplifies inventory management. Delivered in a protective transport case, the pin arrives ready for secure storage and safe transport between inspection stations, reducing the risk of handling damage that would otherwise affect calibration intervals. Simple integration into quality processes As a dedicated gauge pin for end measurements, the component supports quick functional checks, go/no-go seating tests and comparative gauging routines on small diameters. The compact mass and nominal weight contribute negligible thermal inertia, which aids in maintaining dimensional stability during short measurement cycles. For traceability and logistics, the part is listed under SKU M323.099 and carries a GTIN for easy inventory control. Where specificity of fit is critical, this gauge pin offers a clear technical basis for decisions about assembly tolerances and inspection frequency. Contact Metav Werkzeuge today to discuss how the M323.099 gauge pin fits into current inspection workflows or to request tailored advice from the Metav specialists Technical Data Article number: M323.099 GTIN: 4061905055409 Brand: Metav IndustryLine Facts Diameter: 0.99 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.003 kg Special features Workshop version Material: special steel Single piece delivery Protective transport case FAQ What tolerances does this gauge pin achieve? The gauge pin M323.099 achieves a tolerance of ±0.001 mm, suitable for fine end-measurement tasks and tight-fit checks. Is the pin suitable for repetitive use in a production workshop? Yes, the workshop version of the gauge pin is made from special steel and is supplied in a protective transport case to maintain geometry during regular handling. What length and diameter does this pin provide? This model is supplied as a single 50 mm length pin with a diameter of 0.99 mm, identified as M323.099 for stock and ordering. Can the pin be used for small-bore seating tests and assemblies? The narrow profile and high accuracy of M323.099 make it particularly appropriate for small-bore seating tests and precise assembly checks where minimal disturbance is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.99–10.01 mm Test Pin Set 273 pcs, Grade ±0.004 mm Step 0.1 mm, With Pin Holder, In Case - Metav IndustryLine
Take advantage of a wide diameter range (0.99–10.01 mm), high mechanical accuracy (±0.004 mm) and a comprehensive 273-piece composition for consistent diameter verification — supplied ready for transport in a protective case. Order the set directly via Metav Werkzeuge or consult our specialists for application guidance. Gauge pin set M318.526 — 273-piece precision gauge pins, 0.99–10.01 mm, ±0.004 mm (Metav IndustryLine) Gauge pin set M318.526 is a workshop-grade series of precision gauge pins designed for diameter inspection, plug checking and go/no-go verification across production and quality-control environments. 273-piece precision gauge pin set Diameter range 0.99–10.01 mm Tolerance ±0.004 mm Increment 0.1 mm steps Supplied in transport case Faster, repeatable diameter checks with measurable accuracy A compact inspection workflow relies on reproducible results; this gauge pin set delivers that by combining a dense diameter progression with a tight manufacturing tolerance. The ±0.004 mm specification defines the mechanical accuracy of each pin, which reduces ambiguity when checking bore sizes, alignment fits or reference gauges. The 0.1 mm step size balances speed and resolution: simpler than micro‑step sets yet precise enough for routine production control. Because the pins are made from special steel, they offer the stiffness and dimensional stability needed for repeated contact checks, helping to shorten inspection cycles and increase throughput at the measuring bench. Practical range and handling for everyday workshop tasks Covering 0.99–10.01 mm in incremental steps, the set provides a broad working window that suits a variety of small- to medium-diameter components without the need to swap between multiple kits. The pins are supplied in a transport case that organises the set and protects measurement faces during storage and movement; a probe holder is included to facilitate safe handling and to keep the measuring points accessible during routine checks. This arrangement reduces set‑up time at the workstation and lowers the risk of incorrect pin selection, supporting faster decision‑making on pass/fail checks in the shop floor environment. Designed for consistent application and durability For workshops that demand dependable instruments rather than disposable items, the construction from special steel provides wear resistance and dimensional integrity across many cycles. The set includes an over/under indication of ±0.01 mm, enabling simple comparative checks where small allowance limits are required. Delivered as a 273-piece workshop version, it is tailored for machinists, toolmakers and quality engineers who need a reliable ensemble for gauge, fixture and jig verification. The organised layout and robust materials reduce long‑term maintenance and make the set a practical investment for repeatable inspection tasks. Contact Metav Werkzeuge to discuss suitability for specific inspection tasks, request procurement details or arrange a technical consultation — Metav Werkzeuge, Parkring 45, Emmerich; phone +49 2822 7131930; info@metav-werkzeuge.com Technical Data Article number: M318.526 GTIN: 4054469129167 Customs tariff number: 90173000 Facts Set pieces: 273 Diameter range: 0.99–10.01 mm Increment: 0.1 mm Accuracy: ±0.004 mm Length: 50 mm Weight: 5.6 kg Special features Material: Special steel Supplied in transport case Includes probe holder Over/under indication ±0.01 mm Workshop version FAQ What diameter range does the set cover? The gauge pin set M318.526 covers diameters from 0.99 mm up to 10.01 mm in 0.1 mm steps, providing broad coverage for small to mid‑size bores. What accuracy can be expected from the pins? Individual pins are manufactured to a mechanical accuracy of ±0.004 mm; in addition the set provides an over/under indication of ±0.01 mm for comparative checks. Which material is used for the pins and how robust are they? Pins are made from special steel that offers good stiffness and wear resistance for routine workshop inspection and repeated contact measurements. Is the set ready for transport and storage? Yes, the ensemble is supplied in a protective transport case and includes a probe holder for secure organisation and safe handling. What applications suit this gauge pin set? The set is intended for diameter verification, plug checking, fixture set‑up and go/no‑go inspections in production, toolmaking and quality control environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.99–4.01 mm Gauge Pin Set With Pin Holder, Step Sizes 1–4 mm / ±0.01 mm, 0.1 mm Graduations - Metav IndustryLine
Take advantage of the robust special steel construction and the comprehensive 93-piece range to standardise small-diameter verifications with repeatable accuracy; the set’s fine 0.1 mm graduations and tight ±0.004 mm accuracy support efficient batch inspections. Order the gauge pin set directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin set M318.527 — 93-piece precision kit, 0.99–4.01 mm The Gauge pin set M318.527 is a compact verification kit for precise hole and shaft checks in toolrooms, quality control and inspection benches. 93-piece precision range Special steel construction Diameter increment 0.1 mm Probe holder included Consistent precision for everyday inspection The set delivers high-repeatability measurements across a tightly packed range from 0.99–4.01 mm, making it suitable for small-diameter inspections in component production and maintenance. The narrow diameter steps and 0.1 mm graduation allow quick selection of the required pin size, while the specified accuracy ±0.004 mm provides confidence when checking bore limits or verifying gauges. Presented as a consolidated verification kit, the collection reduces tool changes and speeds up routine quality checks without compromising on metrological reliability. Designed for efficient workshop workflows A complete 93-piece kit simplifies organisation during serial testing and prototyping tasks: clear incremental sizes limit selection time and the included probe holder secures pins for repeatable measurements or fixture-based checks. The special steel material balances wear resistance with dimensional stability so that the set remains suitable for frequent use in production environments. Practical grouping and steady handling characteristics make this set a pragmatic choice where throughput and consistent pass/fail decisions are the priority. Practical handling and traceable identification Pins in the set are arranged to support rapid verification sequences and to reduce handling errors during frequent swaps. The compact kit format supports workplace logistics in inspection stations and mobile verification tasks across the shop floor. For documentation purposes, the set’s range and stated tolerance allow straightforward comparison against drawing tolerances and inspection records, helping to maintain traceability in quality-management processes. For purchasing or technical advice on the Metav IndustryLine gauge pin solutions, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 — specialists will assist with specifications and order placement Technical Data Article number: M318.527 GTIN: 4054469156132 Manufacturer: Metav IndustryLine Facts Pieces: 93 Diameter range: 0.99–4.01 mm Graduation: 0.1 mm Accuracy: ±0.004 mm Weight: 5.6 kg Special features Material: special steel Includes probe holder Set for hole and shaft verification Compact organisation for shop-floor use FAQ What diameter range does the set cover? The set covers diameters from 0.99 to 4.01 mm for fine small-bore inspections. How many pins are included in the kit? The kit contains 93 pins arranged to provide continuous increments across the specified range. What is the stated measurement accuracy? Measurement accuracy is specified as ±0.004 mm for the verification range. What material are the pins made from? Pins are manufactured from special steel, chosen for durability and dimensional stability. Is a holder included for handling? Yes, the set includes a probe holder to support secure handling and fixture use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.9mm Test Pin Length 50mm ±0.001 mm, Workshop Version, Special Steel in Case - Metav IndustryLine
Take advantage of the combination of ±0.001 mm tolerance, compact Ø 0.90 mm / 50 mm geometry and workshop‑grade material for dependable in‑process checking and repeatable end‑measure control. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for specification matching. Gauge pin M323.090 — single measuring pin, Ø 0.90 mm, 50 mm (Metav IndustryLine) The Gauge pin M323.090 is a single workshop‑grade measuring pin designed for precise end‑measurement and bore checking in production and inspection environments. Precision ±0.001 mm tolerance Diameter 0.90 mm, length 50 mm Workshop‑grade special steel Delivered in protective transport case Precise tolerance for reliable process control A tolerance of ±0.001 mm places this measuring pin in the category for fine metrology tasks where repeatability matters. The very small allowance reduces uncertainty in go/no‑go checks and comparator setups, enabling consistent inspection decisions and minimising rework. By providing a clearly defined measurement standard, the pin supports tighter process control and faster acceptance of produced features, improving throughput without compromising quality. Compact geometry and durable workshop design The compact Ø 0.90 mm diameter combined with a 50 mm usable length allows access into narrow bores and confined features while retaining sufficient stiffness for routine handling. Manufactured from special steel, the design emphasises wear resistance and dimensional stability under workshop conditions. The workshop execution ensures robustness in daily use, thus extending the service interval and reducing the need for frequent replacements. Practical supply and integration into inspection routines Supplied as a single measuring pin in a protective transport case, the item is ready for secure storage and rapid deployment at the inspection bench. The clear identification (SKU M323.090, GTIN 4061905054945) simplifies inventory control and traceability in production settings. The pin is particularly well suited for end‑measure checks and regular bore verification, offering a compact, low‑complexity solution that supports reliable measurement routines with minimal setup time. For swift supply of workshop‑grade gauge pins and application advice, contact Metav Werkzeuge in Emmerich — the Metav team provides specification support and reliable delivery for production and inspection needs. Technical Data SKU: M323.090 GTIN: 4061905054945 Material: Special steel Tolerance: ±0.001 mm Length: 50 mm Diameter: 0.90 mm Weight: 0.003 kg Facts Diameter: 0.90 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Category: Gauge pins (Messstifte) Special features Workshop design Protective transport case for delivery Single measuring pin for end measurements Suitable for end‑measure and bore checking FAQ What measurement accuracy does this pin provide? The M323.090 gauge pin offers an accuracy of ±0.001 mm, suitable for fine inspection tasks and repeatable end‑measure control. Which applications are typical for this measuring pin? Applications include end‑measure checking, bore verification and production inspection where a compact, precise reference pin simplifies pass/fail evaluation. Is the pin delivered ready for storage and transport? Yes — the pin is supplied in a protective transport case to secure the component during transport and storage and to reduce handling damage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.00mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm repeatability, a compact 1.00 mm diameter and a robust 50 mm length for consistent end‑measurement controls in the workshop; order the part via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.100 — 1.00 mm, ±0.001 mm workshop version (Metav IndustryLine) Gauge pin M323.100 designed for precise end‑measure checks and go/no‑go fit verification in production and inspection environments. Precision ground at ±0.001 mm tolerance 1.00 mm diameter for tight gauge fits 50 mm hardened special‑steel shaft Supplied in protective transport case Reduce rework with micrometre‑level repeatability The gauge pin delivers ±0.001 mm dimensional accuracy, which helps to minimise rework and reject rates during final checks. Manufactured as a workshop version, the shaft is made from special steel and finished to stable running dimensions; this combination ensures consistent contact with bore surfaces and predictable fit behaviour. The compact diameter and high tolerance make this instrument suitable for tight‑fit gauges, small bores and precise end‑measure checks where small deviations can cascade into assembly issues. Robust construction for everyday inspection tasks A 50 mm shaft length paired with hardened material provides both handling comfort and the stiffness required for repeatable checks. The special‑steel composition resists everyday wear and keeps the measuring face stable over many cycles, so quality control procedures remain efficient. As a single, individually supplied test pin, it integrates easily into inspection trays, gauge sets or fixture assemblies without requiring additional adaptation. Practical delivery and traceability for the shop floor Delivery in a protective transport case preserves the finished surface and simplifies storage between uses, reducing the risk of transit damage. The product is identified as M323.100 and carries an ECLASS identifier for procurement and inventory systems, supporting traceable part management on the shop floor. Lightweight and compact, the pin is ready for immediate use in measurement routines and can be combined with existing gauge blocks or fixture tooling to extend inspection capability. For workshop precision and reliable end‑measurement, request the Metav IndustryLine gauge pin M323.100 from Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice. Technical data Article number: M323.100 GTIN: 4061905055416 ECLASS: 21170231 Label: Gauge pin, single, 1.00 mm, ±0.001 mm, length 50 mm Measurements Diameter: 1.00 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Materials & features Material: special steel Workshop version Supplied in protective transport case Category: Gauge pins (messstifte) FAQ What tasks is this gauge pin intended for? The M323.100 gauge pin is intended for precise end‑measurement, bore verification and tight‑fit checks in production and inspection settings where ±0.001 mm accuracy matters. What material and finish does the pin have? This test pin is manufactured from special steel with a hardened, precision ground shaft to retain dimensional stability during repetitive use. Is a calibration certificate included with the part? The product data does not specify a calibration certificate; calibration status is not listed for the M323.100 in the provided information. Can the pin be stored and transported safely? Yes, the M323.100 is supplied in a protective transport case to preserve the measuring surface and simplify storage between uses. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.01-2.0mm Test Pin Set 101 Pc Step 0.01mm With Pin Holder In Case - Metav IndustryLine
Take advantage of a compact 101-piece gauge pin set that combines fine gradation with workshop-ready organisation; the 1.01–2.00 mm range with 0.01 mm steps and a measured accuracy of ±0.004 mm ensures repeatable gauging. Order the set directly via Metav Werkzeuge or consult our experts for technical matching and delivery. Prüfstift-Satz M318.571 — 101-piece gauge pin set with holder, 0.01 mm gradation (Metav IndustryLine) Prüfstift-Satz M318.571 is a precision gauge pin set for checking bores, fits and small features in inspection and assembly tasks across toolmaking and quality control. 101-piece set for fine measurement Graduated at 0.01 mm for fine steps Measuring range 1.01–2.00 mm Supplied with pin holder and transport case Immediate precision for routine gauging This compact set delivers a tightly graded sequence of pins that fills the smallest gaps in workshop inspection. The 1.01–2.00 mm measuring range in 0.01 mm increments gives a practical span for fine bore checks and fit verification, while the documented ±0.004 mm accuracy provides a reliable basis for pass/fail decisions. The combination of fine graduation and verified accuracy reduces iterative testing and speeds up decision loops on the shop floor. Organised selection and ergonomic handling A purpose-built pin holder and the included transport case keep components accessible and protected during daily use. Clear organisation of the 101-piece assortment shortens set-up times and avoids searching for the right diameter, which translates into better throughput and fewer interruptions. The set’s balanced weight and compact footprint are intended for bench use and mobile inspection tasks in production and maintenance environments. Practical explanation of function and measurement benefit Gauge pins are used to determine bore size by inserting the largest pin that fits without forcing; the incremental 0.01 mm steps allow users to approximate true diameter rapidly. With an accuracy of ±0.004 mm, the set supports fine tolerancing where small deviations matter. For users less familiar with plug gauges, the graded pins act as a tactile reference: a snug fit signals conformity, a play or interference indicates the need for corrective action. Robust material and workshop suitability Manufactured from special steel and supplied as a complete set, the components are intended for regular workshop use; the materials and machining quality give consistent contact geometry over many cycles. Delivered in a transport case, the set remains ready for inspection rounds or for inclusion in a quality-control kit. The design suits toolrooms, small-series production and inspection benches where dependable, repeatable gauging removes uncertainty. For a reliable, ready-to-use gauge solution from Metav IndustryLine order the Prüfstift-Satz M318.571 via Metav Werkzeuge or contact our consultants for assistance with integration into existing inspection procedures and delivery options. Technical data Article number: M318.571 GTIN: 4054469168258 ECLASS: 21170231 Facts Measuring range: 1.01–2.00 mm Graduation: 0.01 mm Accuracy: ±0.004 mm Pieces in set: 101 Weight: 1.48 kg Pin length: 50 mm Special features Material: special steel Supplied with pin holder Delivered in transport case for safe transport Set for bore gauging and fit verification FAQ What sizes are covered by the set? The set covers a continuous range from 1.01–2.00 mm in 0.01 mm steps, allowing close matching to fine bore dimensions. Is the accuracy sufficient for workshop quality control? Yes. The Prüfstift-Satz M318.571 offers an accuracy of ±0.004 mm, which is appropriate for precision inspection and small-part verification in toolmaking and machining. Does the set include a holder and a case? Yes. The set is supplied with a pin holder and a transport case to keep the pins organised and protected during use and storage. What material are the pins made from? The pins are produced from special steel, chosen for dimensional stability and durability in repeated gauging operations. How is the set typically used in inspection? Pins are inserted into a bore until a snug fit is found; the largest pin that fits without forcing indicates the bore size to the nearest 0.01 mm increment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.01mm Gauge Pin Length 50mm ±0.001mm Workshop Version, Special Steel - Metav IndustryLine
A compact, high‑precision solution for end‑measurements: the combination of ±0.001 mm tolerance, 1.01 mm diameter and a 50 mm length supports reproducible inspection results and reduces rework. Robust construction in special steel and workshop specification ensure long service life. Order the gauge pin directly via Metav Werkzeuge or ask our consultants for application advice. Gauge pin, single, 1.01 mm ±0.001 mm, 50 mm — Metav IndustryLine workshop gauge The gauge pin, single, 1.01 mm ±0.001 mm, 50 mm is a micro‑range reference for end‑measurements and precision inspection in toolrooms, jigs and quality control benches. Diameter 1.01 mm with ±0.001 mm tolerance 50 mm length for deeper reference measurements Special steel for sustained dimensional stability Workshop design for everyday metrology use Reduce measurement uncertainty with micrometre precision Reliable production depends on measurable tolerances. The gauge pin offers a ±0.001 mm tolerance (1 µm), turning critical pass/fail checks into dependable decisions. This level of accuracy moves the tool from simple go/no‑go control to a reference that supports traceable checks and reduces the need for rework. The 1.01 mm nominal diameter is produced and inspected to tight limits, providing a stable datum for bore checking and calibration stands without frequent replacement. Built for regular workshop use and long service life Durability matters when inspection tools are handled every day. Constructed from special steel, the pin resists wear and preserves diameter stability across repeated insertions. The 50 mm length is practical for deeper reference measurements and for use in fixtures where short pins are insufficient. The workshop specification ensures a balance between toughness and finished surface quality, helping to maintain consistent contact conditions and minimise operator‑induced error. Micro‑range classification and practical application guidance This instrument sits in the micro range of measuring artefacts, ideal for fine mechanical parts, small bores and precision assemblies. Classified for extremely compact measurement tasks, it suits inspection of small components in watchmaking, precision moulded parts and fine engineering. When used as a reference gauge, the pin provides a reproducible datum; paired with calibrated comparators or micrometres, it streamlines quality control and supports documented inspection routines. The article number M323.101 identifies the exact specification for procurement and inventory. Request tailored application support or procurement through Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or info@metav-werkzeuge.com for the Metav IndustryLine M323.101 gauge pin Technical data Article number: M323.101 GTIN: 4061905055423 Manufacturer: Metav IndustryLine Core specifications Diameter: 1.01 mm Length: 50 mm Tolerance/Accuracy: ±0.001 mm Weight: 0.003 kg Measurement range min/max: 1.01 mm / 1.01 mm Materials & special features Material: special steel Workshop version Single piece gauge pin Eclass: 21170231 Story trigger: endmasse FAQ What level of precision does this gauge pin provide? The gauge pin delivers a tolerance of ±0.001 mm, equating to a micrometre‑level reference suitable for fine inspection tasks and precision control. Can this pin be used for bore checking and deeper reference points? Yes, the 50 mm length is suitable for deeper bores and provides a stable datum for many inspection setups when using the Metav IndustryLine M323.101. What material is the pin made from and why does it matter? The pin is made from special steel, chosen for wear resistance and dimensional stability to maintain consistent measurement performance over repeated use. Is this gauge pin intended for heavy industrial use or precision workshops? Classified in the micro‑range, the pin is optimised for precision workshops, toolrooms and inspection benches where small, highly accurate references are required. How is the exact article identified for ordering or stock control? Use article number M323.101 or GTIN 4061905055423 to specify the exact gauge pin version when ordering or checking inventory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.01–2 mm Gauge Pin Set 100 Pieces, Step 0.01 mm, Special Steel, Supplied in Case - Metav IndustryLine
Benefit from a compact, high-resolution set that combines consistent 0.01 mm increments, special-steel durability and organised storage to streamline hole and fit inspections. Order the set directly via Metav Werkzeuge or request tailored advice from our consultants. Gauge Pin Set M318.551 – 1.01–2.00 mm, 0.01 mm increments (Metav IndustryLine) The Gauge Pin Set M318.551 offers finely stepped pins for precise fit checks and calibration tasks in small-bore metrology applications Precision steps of 0.01 mm Hardened special steel construction Supplied in protective transport case Ensure reproducible measurement with fine grading The set’s 0.01 mm pitch gives reliable intermediate sizes for systematic inspection and adjustment. Each pin increases diameter in uniform increments, which simplifies narrowing down the correct fit and reduces iteration time during setup. With an indicated accuracy of ±0.002 mm, the set supports tight tolerance workflows common in toolmaking and precision assembly; this level of repeatability helps to lower scrap rates and speeds up pass/fail decisions on the shop floor. The measured grading is therefore a direct contributor to process efficiency and quality assurance. Robust materials and practical handling Pins are manufactured from special steel, offering wear resistance and dimensional stability for repeated use. A standard pin length of 50 mm provides sufficient engagement for most bore checks while remaining convenient to handle. The set is delivered in a protective transport case, which keeps items organised and minimises handling damage during storage or movement between measuring benches. This combination of material choice and packaging translates into lower lifetime costs through extended service life and fewer replacements. Designed for applied metrology and quick checks Covering the 1.01–2.00 mm range with 100 pins, the set facilitates fine-grained verification tasks such as plug checks, gauge calibration aids and set-up validation for microcomponents. The compact diameter span suits small-bore inspection in watchmaking, medical device manufacture and precision electronics, where rapid identification of the correct size supports lean workflows. Using dedicated pins rather than temporary shims shortens machine downtime and provides a clear, verifiable standard for acceptance criteria. Proven partner quality for consistent supply As part of the Metav IndustryLine offering, this gauge set is intended for routine quality-control programmes that demand traceable, robust tooling. The organised assortment and clearly defined increments reduce human error in size selection and enable consistent documentation of measurement results. The product’s construction and packing emphasise operational reliability, making it a pragmatic choice where accuracy and workflow continuity are priorities. Contact Metav Werkzeuge for specification matching and arrange delivery of the M318.551 gauge pin set from Emmerich, or speak to our advisors for recommendations tailored to your inspection tasks Technical data Article number: M318.551 GTIN: 4054469129341 Manufacturer: Metav IndustryLine Customs tariff number: 90173000 Facts Diameter range: 1.01–2.00 mm Step/increment: 0.01 mm Accuracy: 0.002 mm Pin length: 50 mm Pieces per set: 100 Weight: 1.8 kg Special features Material: special steel Supplied in protective transport case for transport and storage Classification: Messstifte / Lehren (pin gauges / gauge pins) ECLASS: 21170231 FAQ What diameter range and increments does the set cover? The set covers diameters from 1.01 to 2.00 mm in 0.01 mm increments, allowing fine selection for small-bore inspections. How many pins are included and what is the pin length? The set contains 100 pins with a standard pin length of 50 mm, organised for easy retrieval and use. What material are the pins made from and how durable are they? Pins are made from special steel, chosen for wear resistance and dimensional stability under routine inspection loads. Is the set suitable for precision assembly and toolmaking? Yes, the fine grading and stated accuracy make the set well suited to precision assembly, toolmaking and micro-component inspection. How is the set supplied for transport and storage? The pins are supplied in a protective case designed for safe transport and organised storage Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.02mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of micro-scale accuracy (±0.001 mm) combined with a compact 1.02 mm diameter and a robust 50 mm special-steel body for repeatable end-face checks; order via Metav Werkzeuge or ask the consultants for application guidance. Gauge pin M323.102 — 1.02 mm, ±0.001 mm accuracy (Metav IndustryLine) The gauge pin M323.102 is a single precision test pin designed for micro-dimension verification and end-face inspection in workshop and quality-control environments. Precision tolerance ±0.001 mm Diameter 1.02 mm for tight fits 50 mm special-steel length for stability Delivered in a transport case Reliable micro-dimension verification A compact inspection tool that delivers consistent dimensional control for small bores and end surfaces. With a certified manufacturing tolerance of ±0.001 mm, this test pin supports tight acceptance criteria and reduces sorting effort during incoming inspection. The 1.02 mm nominal diameter and 50 mm shank length provide a practical contact length for many small-part assemblies, while the special-steel construction contributes to dimensional stability under typical workshop conditions. Designed for repeatable checks, the pin converts a measured specification into a verifiable, tangible standard. Workshop-ready protection and handling Engineered as a robust workshop version, the test pin is supplied as a single item and packaged for safe transport. The compact mass simplifies handling during routine inspection and bench work, and the supplied transport case protects the pin from damage and contamination between uses. The single-piece delivery reduces inventory complexity and allows direct integration into a measuring set-up or fixture, improving workflow efficiency in both small-batch production and maintenance tasks. Practical use and inspection workflow Ideal for precision assembly and quality-control sequences, the M323.102 facilitates fast go/no-go checks, alignment trials and end-dimension verification on microcomponents. Measurement personnel benefit from a straightforward reference that minimises interpretation and recalibration cycles; the pin is particularly suited to inspection benches where repeatability and clear pass/fail criteria are required. When traceable standards are needed, the compact gauge pin integrates easily into documented inspection routines and parts documentation for consistent results across shifts. For precision end-measurement tasks, choose the Metav IndustryLine gauge pin M323.102 and contact Metav Werkzeuge in Emmerich for procurement or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.102 GTIN: 4061905055966 Category: Gauge pin (Messstifte) Brand: Metav IndustryLine Weight: 0.003 kg Material: Special steel Facts Diameter: 1.02 mm Tolerance: ±0.001 mm Length: 50 mm Mass (net): 0.003 kg Special features Workshop version Single-piece delivery Delivered in transport case Intended for end-dimension checks FAQ What accuracy does the gauge pin offer? The M323.102 gauge pin from Metav IndustryLine is manufactured to a tolerance of ±0.001 mm, suitable for high-precision inspection tasks. What are the nominal diameter and length of the pin? The pin features a 1.02 mm diameter and a 50 mm overall length, giving a reliable contact length for small-bore and end-face checks. Is the product supplied ready for workshop use? Yes — the workshop-version test pin is supplied as a single item and is delivered in a transport case to protect the measuring surface during storage and transport. Which inspection tasks suit this test pin best? The gauge pin is intended for micro-dimension verification, end-dimension checks, alignment trials and pass/fail inspection of small components where a fixed, repeatable reference is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com