Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
1.03mm Test Pin, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of high repeatability and workshop-ready protection: the precise Ø 1.03 mm dimension combined with an ±0.001 mm tolerance ensures reliable end‑measurement results, while delivery in a protective transport case keeps the gauge safe during storage and transit. Order the pin directly via Metav Werkzeuge or consult the technical team for specification advice. Gauge pin M323.103 — Workshop gauge pin, Ø 1.03 mm, ±0.001 mm, 50 mm A gauge pin M323.103 designed for accurate end‑measurements and bore inspection in workshop and inspection environments Workshop version, robust finish Diameter 1.03 mm with ±0.001 mm accuracy Supplied in protective transport case Precision that reduces rework and speeds inspection This workshop gauge pin delivers an exceptionally tight nominal diameter of Ø 1.03 mm with a verified ±0.001 mm tolerance, making it suitable for acceptance testing and go/no‑go verification where small clearances are critical. The narrow tolerance reduces measurement uncertainty and supports repeatable sampling in quality routines, so batch inspection becomes faster and less prone to false rejects. Bold, measurable accuracy like this directly contributes to process stability and lower downstream rework. Built for repetitive use in busy inspection workflows Manufactured from special steel and specified as a workshop version, the pin stands up to routine handling and repeated insertion cycles without rapid wear. The compact 50 mm length provides a stable gripping area while keeping the measuring end accessible for small bores and fixtures. Delivered in a protective transport case, the item is protected during storage and transport, preserving its dimensional integrity between uses and reducing downtime for replacement. Practical advantages for quality control and fixtures As a single‑piece gauge, the pin is ideal for end‑measurement tasks in tooling set‑up, bore verification and end‑mass checks. The precise diameter and minimal tolerance enable confident conformity decisions at first glance, supporting faster throughput on the shop floor. The compact format simplifies handling in tight assemblies and makes the pin a reliable reference for maintenance checks and fixture validation without complex calibration procedures. Choose the Metav IndustryLine gauge pin for dependable ±0.001 mm inspection accuracy; contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for delivery, availability and specification guidance Technical data Article number: M323.103 GTIN: 4061905055973 Label: Gauge pin, single, 1.03 mm, ±0.001 mm, length 50 mm Facts Diameter: 1.03 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: special steel Version: workshop execution Delivery: protective transport case Category: gauge pins Supply: single pin FAQ What level of accuracy can be expected from this gauge pin? The gauge pin M323.103 offers an accuracy of ±0.001 mm, suitable for precision end‑measurements and tight tolerance checks. Is the pin suitable for repeated use in a production environment? Yes, the workshop execution and special steel construction of the M323.103 are chosen to withstand routine handling and repeated insertion cycles. Can this pin be used for bore and hole verification? The diameter and tolerance of the M323.103 make it well suited for bore inspection, end‑mass checks and fixture validation in workshop inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.04mm Gauge Pin Length 50mm ±0.001mm Workshop Finish - Metav IndustryLine
Precision and compactness combine in this inspection pin: 1.04 mm diameter with ±0.001 mm tolerance and a 50 mm length provide reproducible micro‑dimension checks; order directly via Metav Werkzeuge or consult our specialists for application guidance. Inspection pin M323.104 — Gauge pin, 1.04 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) The Inspection pin M323.104 is a workshop‑grade gauge pin for end‑dimension verification and fine mechanical inspection tasks, designed for micro‑component control and repeatable production checks. Workshop grade construction Diameter 1.04 mm, tolerance ±0.001 mm 50 mm length for confined measurements Supplied in protective transport case High-precision performance that lowers rework rates The M323.104 inspection pin delivers ±0.001 mm tolerance in a compact format, making it suitable where reproducible small‑scale measurements are critical. Manufactured from special steel, the pin resists wear and keeps gauge repeatability high; this reduces scrapped parts and lowers inspection time per component. The combination of fine tolerance and robust material translates into fewer measurement uncertainties and a smoother quality workflow. Micro-range design for delicate measuring tasks Classified in the Micro range, the pin’s 1.04 mm diameter and 50 mm length suit confined measuring points, such as bores, pin seats and fine mechanical assemblies. The slim profile allows access where standard gauges cannot reach, while maintaining handling stability for handheld inspection. Using a dedicated gauge pin for end‑dimension checks simplifies calibration chains and provides a clear reference when setting up inspection routines for small parts. Workshop‑ready handling and protected transport Built as a workshop version, the pin arrives supplied in a transport case, which protects the gauge during storage and transit — the case is intended for transport rather than long‑term archive storage. At roughly 0.003 kg the pin is easy to position without inducing bending, and the solid special steel construction balances rigidity with surface endurance. This practical configuration supports fast inspection cycles on the shop floor and helps maintain consistent measuring procedures across shifts. Choose the Metav IndustryLine inspection pin for dependable micro‑measurement control — contact Metav Werkzeuge in Emmerich for tailored advice and supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: M323.104 GTIN: 4061905055980 Facts Diameter: 1.04 mm Length: 50 mm Accuracy/tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: special steel Workshop version (Werkstatt‑Ausführung) Supplied in transport case Category: Gauge pins / Inspection pins FAQ What accuracy can be expected from this inspection pin? The inspection pin M323.104 offers a tolerance of ±0.001 mm, providing high‑precision checks suitable for micro‑dimension control. Which materials is the pin made from? The M323.104 is manufactured from special steel, chosen for wear resistance and dimensional stability in repeated inspection use. Is this pin suitable for measuring very small bores and seats? Yes, with a 1.04 mm diameter and 50 mm length the gauge pin is intended for confined measuring points, particularly in micro‑component inspection. How is the pin delivered and handled on the shop floor? The inspection pin M323.104 is supplied in a protective transport case and designed as a workshop version for robust handling during routine inspections. What category does this instrument fall into for measurement planning? This gauge pin belongs to the Micro range, intended for ultra‑compact precision tasks in fine mechanical and watchmaking contexts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.05mm Test Pin Length 50mm ±0.001mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of ultimate dimensional accuracy, compact handling and workshop-ready design to streamline final inspections and reduce rework. The high-precision tolerance and compact length make this pin ideal for rapid go/no-go checks and repeatable bore verification. Order the gauge pin directly via Metav Werkzeuge or ask our consultants for application advice. Metav IndustryLine Gauge Pin M323.105 — 1.05 mm, ±0.001 mm, 50 mm The gauge pin M323.105 is a single precision verification pin for end‑measurements and bore checks in workshop and production environments. Precision ±0.001 mm tolerance Diameter 1.05 mm for fine bore checks Length 50 mm for stable insertion depth Workshop execution for robust daily use Reliable accuracy for final inspection and sorting A tolerance of ±0.001 mm positions this pin in the category of high‑precision verification tools, offering measurable improvements in decision confidence during final inspection. The nominal 1.05 mm diameter and 50 mm length create a stable contact zone that minimises play in small bores, which helps to reduce false rejects and rework. Made from special steel, the pin maintains dimensional integrity under routine handling; its low mass supports swift manual checks while preserving repeatability across multiple cycles. Built for everyday workshop handling and throughput Designed as a workshop execution item, the pin balances robustness with ease of use. The compact form factor supports quick insertion and withdrawal in production jigs and handheld checks, improving process throughput without sacrificing control. With a listed mass of 0.003 kg, handling is comfortable and fatigue is reduced during repetitive testing tasks. The single‑piece configuration suits bench auditing, assembly line spot checks and integration into go/no‑go fixtures, delivering practical benefits where time and reliability matter. Integrates simply into quality routines and documentation For quality managers and inspection technicians, the pin acts as a straightforward tool for end‑dimension verification and rapid functional gauging. Identification via SKU and GTIN streamlines inventory and traceability within existing systems, while the clear specification of ±0.001 mm helps define acceptance criteria in inspection plans. Use the pin for acceptance testing, inbound inspection of small components or routine spot checks to establish objective, repeatable results that support process stability and reduce downstream variance. Contact Metav Werkzeuge today to discuss supply options for the Metav IndustryLine gauge pin M323.105 and to obtain advice on integrating these pins into existing inspection procedures Technical data Article number: M323.105 GTIN: 4061905055997 Brand: Metav IndustryLine Category: Messstifte Numbers / core technical data Diameter: 1.05 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: Special steel Execution: Workshop version Application: End gauges and bore verification FAQ What tolerance does this gauge pin provide? The gauge pin M323.105 is specified with a tolerance of ±0.001 mm, making it suitable for high‑precision verification tasks. Which material is used for the pin? This single pin is manufactured from special steel, chosen for dimensional stability and suitability for workshop use. For which tasks is the pin intended? The pin is intended for end‑measurement and bore checks, serving as a compact verification tool for go/no‑go checks and final inspection. How is the product identified for ordering and stock control? The product is listed as SKU M323.105 with GTIN 4061905055997 for straightforward ordering and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.06mm Gauge Pin Length 50mm ±0.001mm Workshop Option - Metav IndustryLine
Take advantage of high repeatability and micrometre-level tolerance together with robust workshop design for dependable in‑fixture measurement. Order the test pin directly via Metav Werkzeuge or consult the specialists for integration advice. Test pin M323.106 — 1.06 mm diameter, ±0.001 mm tolerance A single test pin for precise locating and end‑size checks in fixtures and gauges, designed as a workshop version with a 50 mm shank for secure clamping and handling Diameter 1.06 mm ±0.001 mm Length 50 mm workshop version Made from special steel Delivered in a transport case Micrometre-grade accuracy for repeatable inspections The M323.106 delivers a diameter of 1.06 mm with a narrow tolerance of ±0.001 mm, providing the kind of dimensional certainty required for short‑run gauging and end‑size verification. Such a tight tolerance reduces measurement uncertainty and supports consistent pass/fail decisions on production lines. Using a hardened, stable pin core minimises wear and keeps contact geometry predictable, which in turn preserves repeatability in fixtures and plug checks. Robust workshop construction reduces downtime Built as a workshop version, this single test pin combines a hardened special steel shank with a practical 50 mm length for reliable clamping in common fixture blocks. The chosen material and heat treatment deliver resistance to surface damage and maintain roundness under cyclic contact, so maintenance intervals are extended and replacement frequency is reduced. The compact, single‑piece design simplifies installation in inspection rigs and reduces handling time during batch checks. Practical handling and storage for production environments The pin is supplied in a transport case, protecting the precise measuring face from knocks and contaminants during storage and transit. The 50 mm length offers ample engagement for most gauge blocks and fixture pockets while keeping the exposed portion short enough to limit bending or deflection during manual handling. Clear labelling and a stable case mean the pin can be stored alongside complementary gauges, keeping inspection tools organised and immediately available when quality checks are required. Designed for integration into inspection processes Ideal for inclusion in go/no‑go fixtures, punch gauges or as replacement locating pins, this component supports fast, reliable verification of small bores and end sizes. Its geometry is optimised for repeat contact and easy cleaning; the nominal diameter and tolerance match common inspection plans where micrometre precision is required. When fitted into a hardened pocket or bush, the pin helps maintain positional accuracy and contributes directly to traceable measurement results. For immediate procurement or technical integration support, contact Metav Werkzeuge in Emmerich — Metav IndustryLine stockists can advise on fixture compatibility and delivery options Technical data Article number: M323.106 GTIN: 4061905056000 Weight: 0.003 kg Material: Special steel Facts Diameter: 1.06 mm Length: 50 mm Tolerance / accuracy: ±0.001 mm Special features Workshop design Supplied in transport case (plastic or wooden) Single test pin for fixture and gauge use FAQ What is the intended use of this test pin? The test pin M323.106 is intended for precise locating and end‑size verification in gauges, fixtures and plug checks where a 1.06 mm diameter reference is required. How precise is the pin and how does that affect measurements? With a stated tolerance of ±0.001 mm, the pin provides micrometre‑level reference geometry that reduces measurement uncertainty and supports consistent pass/fail decisions in inspection processes. What material is the pin made from and why is that important? The pin is manufactured from special steel chosen for surface hardness and wear resistance, which helps preserve roundness and contact geometry during repeated use. Is the pin delivered ready for storage and transport? Yes, the pin is supplied in a transport case to protect the measuring face and maintain traceability and cleanliness during storage and transit. Can this pin be used in automated fixtures? The solid, compact geometry and tight tolerance make the pin suitable for integration into automated and manual fixtures alike, provided the fixture accepts the 50 mm shank length and 1.06 mm diameter Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.07mm Gauge Pin Precision ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, a compact 1.07 mm diameter and a 50 mm working length for reliable end‑measure checks in workshop environments; order the probe directly via Metav Werkzeuge or consult the technical team for application advice. Test pin M323.107 — workshop‑grade inspection pin, 1.07 mm diameter, ±0.001 mm The Test pin M323.107 serves as a compact, workshop‑grade cylindrical gauge for end‑measure verification, fixture alignment and repeatable positional checks in precision inspection tasks. Diameter 1.07 mm precision pin Tolerance ±0.001 mm Length 50 mm workshop grade Precision that reduces rework and inspection time The small‑diameter probe is designed for tasks that demand true microscopic accuracy; with a diameter of 1.07 mm and an accuracy of ±0.001 mm the component delivers measurement certainty that shortens decision cycles on the shop floor. The narrow gauge form factor minimises probing intrusion while enabling repeatable positional checks, so throughput improves without sacrificing quality. For process engineers and quality technicians, that precision translates directly into fewer rejected batches and less time spent on corrective actions. Robust construction for frequent use Manufactured from special steel, the pin is hardened and finished for abrasion resistance and dimensional stability under repeated contact. The 50 mm length offers comfortable handling and sufficient reach for most fixture and jig situations while keeping the probe stiff and easy to locate. In workshop environments where tools are subject to frequent handling, this robust construction supports consistent results over many cycles and reduces the need for frequent replacements. Integrates simply into inspection workflows The compact probe form is compatible with common pin‑holder systems and can be used for end‑stop verification, positional referencing and comparative checks across small bores and recesses. Its workshop grade specification means it is ready for integration into inspection fixtures without elaborate adaptation. Where traceability is required, the pin’s clear nominal and tolerance data aid documentation and quality records, supporting routine measurement protocols and audit trails. For workshop‑grade precision from Metav IndustryLine, request supply of the M323.107 via Metav Werkzeuge or consult the Metav technical advisers at info@metav-werkzeuge.com to confirm fitment and application suitability. Technical data Article number: M323.107 GTIN: 4061905056864 Manufacturer: Metav IndustryLine Facts Diameter: 1.07 mm Length: 50 mm Accuracy / tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: Special steel Workshop execution Label: Test pin, single FAQ What materials is the M323.107 suitable for measuring? The M323.107 is a measurement probe intended for positional and end‑measure checks and is material‑agnostic as a gauge; its special steel construction ensures durability when used against typical workshop materials. Is the accuracy of ±0.001 mm sufficient for small‑part inspection? Yes, the ±0.001 mm tolerance positions the probe for high‑precision checks on small parts where micron‑level repeatability is required for process control. Can the pin be used in existing fixture holders? The probe’s standard cylindrical form and 50 mm length make it compatible with common pin holders and fixture systems designed for small‑diameter gauges. How does the material affect long‑term dimensional stability? Made of special steel, the probe resists wear and maintains dimensional stability under repeated contact, which supports consistent measurement performance over many cycles. Is the M323.107 suitable for comparative or reference checks? Yes, the compact gauge is ideal for reference positioning and comparative inspections where a defined, repeatable contact point is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.08mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
High repeatability and a compact profile make inspection tasks faster and more reliable; the high ±0.001 mm tolerance and 1.08 mm diameter give precise end‑measure results while the 50 mm length reaches confined bores. Order the Test pin directly via Metav Werkzeuge or ask our consultants if needed Metav IndustryLine Test pin M323.108 — 1.08 mm, ±0.001 mm, 50 mm Test pin M323.108 for precision end‑measure checks and fine‑bore inspections in workshop environments ±0.001 mm tolerance for high precision Diameter 1.08 mm for fine inspection 50 mm length for confined bores Workshop‑grade special steel construction Precision that reduces rework and saves inspection time The Metav IndustryLine Test pin M323.108 is designed for metrology tasks where small deviations matter: the nominal 1.08 mm diameter combined with a ±0.001 mm tolerance supports highly repeatable measurements and tighter control of production tolerances. By using a gauge pin with such low variance, supply‑chain checks and final inspections deliver fewer false rejects, which improves throughput and reduces scrap. The compact geometry offers straightforward positioning in typical inspection jigs and receptacles, ensuring the measurement process stays efficient without complicated fixtures. Robust workshop construction for reliable handling Manufactured from special steel and offered in a workshop execution, the pin pairs durability with fine‑dimensional stability. The 50 mm length provides sufficient reach for many end‑measure applications while keeping the pin stiff and easy to handle, reducing bending risk during insertion. The robust material choice resists wear in standard inspection use, so calibration intervals remain predictable and tool life increases. This construction supports consistent contact between pin and workpiece, which is essential for trustworthy readings and dependable quality control processes. Integrates into inspection routines and improves traceability As a single test pin, the component suits serial quality checks, post‑machining verifications and gauge comparison tasks where a compact reference element is required. The clear specification of ±0.001 mm tolerance and nominal diameter simplifies documentation and traceability within quality systems, making it easier to justify measurement outcomes in production records. For workshop managers and metrology technicians, the combination of precise specifications and robust materials streamlines the choice of reference elements and contributes to a measurable improvement in first‑pass yield. Contact Metav Werkzeuge for application advice and to secure the Metav IndustryLine Test pin M323.108 for your precision inspection tasks Technical data Article number: M323.108 GTIN: 4061905056871 Brand: Metav IndustryLine Core data Diameter: 1.08 mm Tolerance / accuracy: ±0.001 mm Length: 50 mm Weight: 0.003 kg Materials & features Special steel Workshop execution Single test pin FAQ What tolerance does this test pin provide? The Metav IndustryLine Test pin M323.108 is specified with a tolerance of ±0.001 mm, suitable for high‑precision inspection tasks. What is the nominal diameter and length of the pin? The pin has a nominal diameter of 1.08 mm and a length of 50 mm, dimensions given for integration into standard gauge setups. From which material is the pin made? This test pin is manufactured from special steel, offering durability for routine workshop inspection. Is the item supplied individually or in a set? The product is supplied as a single test pin, described as an individual item for single‑point reference use. What identifiers should be used when ordering or documenting the pin? Use SKU M323.108 and GTIN 4061905056871 when ordering or recording the test pin in quality documentation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.09mm Gauge Pin, ±0.001mm, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of extreme dimensional control and compact handling for reliable in‑process checks; the 1.09 mm diameter and ±0.001 mm tolerance provide repeatable go/no‑go verification—order directly via Metav Werkzeuge or contact our consultants for integration advice. Metav IndustryLine Single gauge pin 1.09 mm – ±0.001 mm tolerance, 50 mm length The single gauge pin 1.09 mm is a workshop‑grade precision test pin for fast end‑dimension checks and fit verification in small bores and component assemblies. Workshop‑grade design for daily use High precision ±0.001 mm tolerance Diameter 1.09 mm in special steel Compact 50 mm length for easy handling Secure fit control with micrometre accuracy A finely manufactured gauge pin with a ±0.001 mm tolerance gives shops a reliable benchmark for small‑bore inspections and fit checks. The extremely tight tolerance translates into fewer assembly surprises and reduced rework because measurement uncertainty is minimised; this level of precision supports efficient acceptance testing and shortens decision cycles on the shop floor. The small diameter is ideal for confirming end dimensions and verifying plug fits where even minor deviations matter. Robust construction for everyday workshop use Built in a workshop‑grade configuration from special steel, the pin balances wear resistance with convenient handling. Its 50 mm length provides adequate engagement for through‑checks and short bores while keeping the tool manoeuvrable in confined set‑ups. Low mass supports safe, repeatable measurements and reduces operator strain during frequent checks—practical for production lines and maintenance benches alike. Simple integration into quality routines The compact geometry and consistent diametric control make the gauge pin straightforward to include in existing inspection sequences or fixture checks. Clear numeric specification reduces interpretation time in documentation and enables traceable records when combined with usual inspection practices. For traceability and inventory, the item is listed under SKU M323.109 and carries a GTIN for procurement and stock management. Contact Metav Werkzeuge for availability, sample requests or to discuss how the Metav IndustryLine M323.109 can be incorporated into current inspection routines Technical data SKU: M323.109 GTIN: 4061905056888 Material: Special steel Diameter: 1.09 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Numeric data Diameter: 1.09 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg EClass: 21170231 Special features Workshop version Category: Gauge pins Precision grade for end‑dimension checks Story trigger: end dimensions FAQ What applications is this gauge pin suited for? The gauge pin is intended for small‑bore checks, plug fit verification and end‑dimension inspection in metalworking and precision assembly; the Metav IndustryLine gauge pin M323.109 is particularly useful where micrometre‑level control is required. How precise is the diameter of the pin? The diameter is specified at 1.09 mm with a tolerance of ±0.001 mm, giving consistent reference dimensions for tight‑tolerance inspections. What materials can this pin be used with? The pin is manufactured from special steel, suitable for use in contact checks against common machining materials; it is designed as a durable reference, not as a cutting tool. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.10mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of ultra-fine tolerance and compact length for reliable in-process checks; the combination of ±0.001 mm accuracy, 1.10 mm diameter and workshop-grade construction supports consistent quality control. Order through Metav Werkzeuge or request application advice from our consultants. Gauge pin M323.110 — 1.10 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.110 gauge pin is a single test pin for high-precision end-measure inspections in workshop and production environments Workshop version for everyday use Diameter 1.10 mm with ±0.001 mm tolerance Length 50 mm for easy access in assemblies Supplied in a protective case Accuracy that secures production tolerances A compact test pin with a 1.10 mm diameter and ±0.001 mm tolerance delivers measurable improvement in pass/fail decisions during incoming inspection and process control. The extremely small permitted deviation reduces measurement uncertainty and supports tighter statistical process control, meaning fewer false rejects and clearer conformity assessments. The high specification is particularly advantageous for fine mechanical assemblies where minute deviations directly affect function and fit. Built for workshop handling and repeatability Constructed from special steel and specified as a workshop version, this single pin combines robustness with dimensional stability. The 50 mm length provides sufficient reach into recesses while remaining simple to handle and store. Supplied in a protective case, the pin is kept secure during transport and storage, which helps maintain surface integrity and accuracy between uses. These attributes reduce downtime and extend service life in everyday inspection routines. Practical integration into inspection routines The M323.110 slot-in format suits bench testers, pin gauges and simple go/no-go setups; traceability is supported by the SKU M323.110 and GTIN 4061905056895 for inventory and quality records. As a single test pin, it is ideal for targeted dimensional checks or as a replacement item in existing sets, enabling quick restoration of inspection capability without requalifying entire gauge stacks. For bespoke inspection concepts or advice on incorporating this pin into automated checks, technical guidance is available. Contact Metav Werkzeuge for tailored advice on integrating the M323.110 gauge pin into inspection procedures or to arrange supply from stock at Metav Werkzeuge Technical data Article number: M323.110 GTIN: 4061905056895 Weight: 0.003 kg Material: Special steel Length: 50 mm Facts Diameter: 1.10 mm Tolerance: ±0.001 mm Measuring range: 1.1 mm Special features Workshop execution Single test pin Supplied in protective case FAQ What level of accuracy does this pin offer? The M323.110 gauge pin from Metav IndustryLine is specified with a tolerance of ±0.001 mm, suitable for fine end-measure inspections and precise fit checks. Is the pin supplied ready for immediate use in the workshop? Yes, the workshop version is delivered as a single test pin in a protective case; the M323.110 is ready to be used in standard inspection setups. What material is the pin made from and why does that matter? The pin is made of special steel, chosen to provide dimensional stability and resistance to wear in regular workshop use; this helps maintain accuracy over repeated inspections. Can this pin replace a damaged element in a gauge set? The single-item format and standardised diameter make the M323.110 suitable as a direct replacement for compatible pin gauge sets and targeted repairs. How is the product identified for inventory and quality records? Identification is via SKU M323.110 and GTIN 4061905056895, which support traceability and stock management for inspection equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.11mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Finish, Special Steel, Supplied in Case - Metav IndustryLine
As a compact precision tool for end‑dimension inspection, this gage pin combines ±0.001 mm tolerance with a 1.11 mm diameter and a 50 mm length, delivering repeatable control in workshop metrology; order the part directly via Metav Werkzeuge or consult the Metav advisors for application advice. Gage pin M323.111 — 1.11 mm diameter, ±0.001 mm, 50 mm length The Gage pin M323.111 is a single precision control pin for end‑measurements and plug gauges, designed for workshop use and quick inspection of small bores and features Workshop version for industrial use Diameter 1.11 mm with ±0.001 mm accuracy Length 50 mm for end‑dimension checks Delivered in transport box Consistent accuracy for process control A tolerance of ±0.001 mm establishes this control pin as a rational choice where measurement certainty influences production yield. The narrow diameter of 1.11 mm is manufactured to tight form and size limits, so repeatable fits and go/no‑go checks can be relied upon during routine inspections. The geometry is optimised to minimise deformation under handling; the result is reduced measurement scatter and fewer downstream reworks. Where statistical control of small bores is required, this precision pin provides a verifiable measurement datum that can be used to validate fixtures and gauges. Robust design tailored to workshop workflows Constructed from special steel, the pin combines surface hardness and resistance to wear with the handling properties needed in a production environment. The 50 mm length gives sufficient engagement for many small‑bore checks while remaining easy to position by hand or with simple holders. Supplied as a single unit in a transport box, the product is protected during storage and transit and arrives ready for immediate use in the metrology bench or inspection trolley. The workshop execution balances durability with practical handling to keep inspection cycles efficient. Simple integration into inspection regimes The item suits manual and semi‑automated checking routines and can serve as a reference pin for plug gauge sets or fixture verification. Marked traceability elements make it straightforward to log the SKU and GTIN in quality records and inspection plans. Because the component is a dedicated control pin, it reduces complexity compared with adjustable or multi‑part gauges and supports short cycle time checks without calibration overhead in many shop‑floor scenarios. For procurement or technical matching, contact Metav Werkzeuge for expert guidance and rapid delivery from Emmerich; Metav’s metrology specialists will advise on suitability and complementary gauge hardware. Technical data SKU: M323.111 GTIN: 4061905056901 Label: Gage pin, single, 1.11 mm, ±0.001 mm, length 50 mm Facts Diameter: 1.11 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: Special steel Workshop execution Supplied single, in transport box (plastic/wood) Intended for end‑dimension and plug checks FAQ What measurement tolerance does the gage pin offer? The gage pin M323.111 is manufactured to a tolerance of ±0.001 mm, suitable for tight control of small bores and precision end‑measurements. Can the pin be used as a reference in plug gauge sets? Yes, the control pin is intended for plug/checking applications and can serve as a fixed reference within inspection fixtures or gauge sets. Is the pin supplied ready for use and protected for transport? The pin is supplied as a single unit and is delivered in a transport box to protect the surface finish and geometry during storage and shipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.12mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of a combination of ultra-fine accuracy and robust workshop construction for consistent inspection and jig alignment. The ±0.001 mm specification and special steel construction make precise end‑measure checks reliable; order the part directly via Metav Werkzeuge or ask our consultants for application advice. M323.112 Gauge pin – 1.12 mm, ±0.001 mm, 50 mm (Metav IndustryLine) M323.112 gauge pin for precision inspection and fixture alignment in workshop metrology Workshop-grade special steel Tolerance ±0.001 mm (1 µm) accuracy Diameter 1.12 mm, length 50 mm Single-piece supply for inspection tasks Engineered for repeatable measurement results The M323.112 is a compact gauge pin engineered to deliver repeatable dimensional checks where micrometre-level control matters. With a declared tolerance of ±0.001 mm (1 µm) the pin supports tight quality control limits commonly required in components with fine bores or precision fitments. The specification means that bore verification or plug‑gauge substitution yields traceable, measurable outcomes rather than subjective assessment, which reduces scrap rates and accelerates inspection throughput. Durability and handling designed for daily workshop use Constructed from special steel and finished for reliable seating, this inspection pin combines wear resistance with straightforward handling. The 50 mm shank offers sufficient engagement for most small-bore checks while remaining short enough to avoid deflection during insertion. The workshop-grade build resists deformation during routine use, so calibration intervals are extended and the tool retains functional accuracy under frequent handling — a practical benefit for production environments and jigs where tools undergo repeated cycles. Clear benefits for quality control and fixture setup For applications such as end‑measure verification, alignment of fixtures and gauging in assembly, the pin provides a compact, measurable datum that integrates with manual and semi-automated processes. The compact 1.12 mm diameter and tight tolerance allow it to serve as a reference in precision assemblies, reducing setup times and improving first‑pass yield. Where measurement consistency is required, the pin’s specification supports objective decision-making in incoming inspection and during final checks. Choose the Metav IndustryLine M323.112 for consistent 1 µm checks — contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply from our European quality hub. Technical Data Article number: M323.112 GTIN: 4061905056918 Manufacturer: Metav IndustryLine Material: Special steel Weight: 0.003 kg Facts Diameter: 1.12 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Workshop version Single-piece supply Category: Gauge pin (inspection pin) FAQ What tolerance is specified for this gauge pin? The M323.112 gauge pin is specified with a tolerance of ±0.001 mm (1 µm), suitable for high-precision bore and fit checks. What material is the pin made from? This inspection pin is manufactured from special steel, providing wear resistance appropriate for routine workshop use. For which tasks is this pin intended? The pin is intended for end‑measure verification, fixture alignment and precision bore checks in workshop metrology. How is the item supplied? The article is supplied as a single-piece gauge pin (SKU M323.112) for flexible integration into inspection kits. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.13mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of a highly precise workshop test pin with a ±0.001 mm tolerance and a compact 1.13 mm diameter for reliable end‑measure checks; the hard‑working construction and defined 50 mm length support repeatable inspection routines. Order the gauge pin M323.113 directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.113 – workshop test pin, 1.13 mm, ±0.001 mm tolerance A compact gauge pin designed for fine bore verification and end‑measure checks in workshop environments, combining tight dimensional control with robust everyday handling. High precision ±0.001 mm tolerance Diameter 1.13 mm for fine bore checks 50 mm special-steel length Workshop version for robust daily use Repeatable precision for end‑measure verification The compact test pin delivers ±0.001 mm positional certainty, making it suitable for tasks where small deviations affect assembly fit or functional clearance. This level of tolerance translates to measurable savings: fewer rejected parts, reduced rework and a clearer go/no‑go decision during incoming inspection or final checks. The slim 1.13 mm diameter and calibrated geometry provide a stable reference for bore checks and plug‑gauge substitutes, while the fixed 50 mm length ensures consistent contact depth when used with gauge blocks, templates or simple fixtures. The combination of fine resolution and defined geometry supports reliable statistical process control in small‑part production. Built for workshop use: material and handling benefits Manufactured in special steel, the pin is specified for workshop conditions where handling and routine use demand dimensional stability and wear resistance. The workshop version designation indicates a product balanced between precision and robustness: it withstands daily handling and insertion cycles yet retains the measured form that inspection depends on. The compact mass also simplifies manual manipulation and decreases the risk of impact damage during inspection runs. Where traceable measurement references are needed within production, the pin serves as a pragmatic tool for spot checks, bench testing and assembly verification without requiring elaborate setup. Practical application and installation in inspection routines The single‑piece delivery supports targeted checks or replenishing mixed gauge sets; its modest weight (approx. 0.003 kg) and defined geometry make it easy to position in small bores and hard‑to‑reach cavities. The test pin integrates readily with length stops, mandrels and simple jigs, and its 1.13 mm diameter is suitable for precision fits in instrumentation, micro‑mechanics and connector manufacturing. For repeatable results, use a consistent insertion technique and a clean contact surface; when combined with calibrated reference blocks or micrometric fixtures, the pin becomes part of a cost‑effective quality control chain that emphasises measurable outcomes over complex processes. Choose the Metav IndustryLine gauge pin M323.113 for precise end‑measure tasks and contact Metav Werkzeuge for tailored advice and reliable delivery from Emmerich. Technical data Article number: M323.113 GTIN: 4061905056925 Brand: Metav IndustryLine Material: Special steel Facts Diameter: 1.13 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Workshop execution Single piece delivery Category: Gauge pin Suitable for fine bore and end‑measure verification FAQ What is the intended use of this test pin? The gauge pin M323.113 is intended for fine bore checks and end‑measure verification in workshop and small‑part inspection tasks. Is the material suitable for repeated inspection cycles? Yes, the test pin is made from special steel and the workshop version is designed for robust daily use while maintaining dimensional stability. Can the pin be integrated with existing jigs and fixtures? Integration is straightforward: the 1.13 mm diameter and 50 mm length fit common mandrels, stops and micro‑fixtures used in precision inspection. What accuracy can be expected during routine checks? Routine inspections using the gauge pin M323.113 benefit from the stated ±0.001 mm tolerance, supporting consistent go/no‑go decisions and reduced rework. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.14mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of micrometre-level repeatability and a compact, workshop-ready design for dependable in-process checking; the 1.14 mm diameter and ±0.001 mm tolerance ensure reproducible results in small-diameter inspection tasks. Order the single test pin directly via Metav Werkzeuge or ask our consultants if needed. M323.114 single test pin — 1.14 mm diameter, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) M323.114 single test pin serves as a high-precision gauging element for dimensional checks and end-measure references in workshop and production inspection. Workshop-grade precision, ±0.001 mm accuracy Diameter 1.14 mm in ground special steel 50 mm hardened length for reliable seating Supplied as a single gauge pin, ready for use Traceable one-micron accuracy for small-diameter checks The compact pin delivers ±0.001 mm positional certainty, corresponding to a one-micron band of tolerance, which is crucial when assessing fit and clearances in precision assemblies. Such fine accuracy reduces double-check cycles and speeds up go/no-go decisions during quality control processes. The documented tolerance and repeatability help laboratories and production lines to maintain consistent inspection thresholds and to align measurement results with internal quality plans. Robust material and finish for repeatable contact performance Manufactured from special steel with a precision ground shaft, the pin resists wear and preserves form at the contact surface, ensuring consistent seating in gauges, fixtures or bores. The 50 mm length provides sufficient engagement for many small-component checks while remaining easy to handle. The material choice balances hardness and machinability so that maintenance intervals are extended without sacrificing surface integrity at the measuring point. Seamless use in inspection routines and fixturing The single test pin is suitable for insertion into customer fixtures, bench gauges or optical setups as a stable reference element. Its compact diameter makes it ideal for small bores and end-measure applications where conventional pins may not fit. The straightforward geometry supports rapid repeat measurements and reduces operator influence on the result when combined with standardised handling and fixturing practices. Practical benefits for workshop and production environments As a workshop-grade component, the pin simplifies dimensional checks on turned or ground parts, enabling rapid verification during setup and serial production. The concise specification of 1.14 mm diameter and the micrometre tolerance aid procurement and inventory decisions by providing a clear technical reference for purchasing compatible gauging hardware and adapters. For precision gauging requirements, contact Metav Werkzeuge in Emmerich to discuss the M323.114 single test pin and ensure the correct specification and integration into existing inspection workflows. Technical data SKU: M323.114 GTIN: 4061905057236 Manufacturer: Metav IndustryLine Core specifications Diameter: 1.14 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Features and materials Material: special steel Supply form: single test pin Version: workshop execution FAQ What is the nominal diameter and how precise is it? The nominal diameter is 1.14 mm and the pin is specified with an accuracy of ±0.001 mm for the M323.114 single test pin supplied by Metav IndustryLine. For which applications is this pin intended? It is intended for small-bore gauging, end-measure tasks and fixture references where micrometre-level repeatability is required in workshop and production environments. Can the pin be used in a fixture or holder? Yes, the compact geometry and 50 mm length make the pin suitable for use in bespoke fixtures, bench gauges and holder systems as a repeatable reference element. What material is the pin made from and why does that matter? The pin is made from special steel, chosen to provide a balance of hardness and wear resistance so the contact surface remains stable over repeated measurements. Is the M323.114 suitable for optical measurement alignment? Yes, its accurate diameter and consistent surface finish make it a practical mechanical reference for optical setups where precise centring and repeatable seating are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.15mm Gauge Pin, ±0.001mm Precision, 50mm Length, Workshop Version in Case - Metav IndustryLine
Combine the ±0.001 mm accuracy with a compact 1.15 mm diameter and 50 mm length to ensure repeatable end‑dimension checks; robust special steel construction and workshop‑grade design support daily inspection routines. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.115 — single test pin, 1.15 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) The gauge pin M323.115 is a workshop‑grade single test pin designed for precise end‑dimension verification and tight‑tolerance inspection in assembly and quality control environments Workshop-grade precision component Diameter 1.15 mm for fine measurements Tolerance ±0.001 mm high accuracy Reliable micrometre‑class accuracy for critical checks The compact inspection pin delivers a certified mechanical tolerance of ±0.001 mm, making it suitable for tasks that require micrometre‑level certainty. Its 1.15 mm diameter is optimised for probing small bores and end faces where repeatability is essential; the pin’s narrow profile enables safe insertion into fine holes without disturbing adjacent features. This level of accuracy reduces rework and shortens inspection cycles, supporting lean quality processes in small‑part production. Durable workshop design that eases handling and storage Manufactured from special steel and finished as a workshop execution, the pin combines a robust feel with a low mass (approx. 0.003 kg) for precise manual positioning. The 50 mm length provides adequate reach for most end‑dimension measurements while remaining easy to handle on the bench. Delivery in a protective transport case ensures secure storage and minimises the risk of damage during handling or transit, preserving the metrological integrity between uses. Seamless integration into verification and assembly workflows As a single inspection pin, the component is ideal for end‑dimension controls, feeler checks and incorporation into fixturebased verification routines. The clear GTIN: 4061905054037 and manufacturer backing from Metav IndustryLine facilitate traceability and procurement for production plants and inspection labs. Use in combination with gauge blocks or master pins supports fast comparative checks and helps standardise acceptance criteria across shifts and sites. Secure measurement certainty with the Metav IndustryLine gauge pin M323.115 — contact Metav Werkzeuge for tailored advice and prompt delivery from Emmerich. Technical data Article number: M323.115 GTIN: 4061905054037 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 1,15mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 1.15 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.003 kg Special features Material: special steel Workshop execution Delivered in protective transport case for shipment Single test pin for end‑dimension verification FAQ What is the guaranteed tolerance of this inspection pin? The inspection pin is specified with an accuracy of ±0.001 mm, ensuring micrometre‑class repeatability for critical dimensional checks with the Metav IndustryLine gauge pin M323.115. Which material is the pin made from and why does that matter? The pin is made from special steel, chosen for dimensional stability and robustness in workshop use; this material supports repeated handling without rapid wear while maintaining measurement integrity. Is the gauge pin supplied ready for safe transport and storage? Yes, the M323.115 is supplied in a protective transport case to prevent damage during shipment and storage, preserving its precise dimensions for immediate use. Can this test pin be used for small‑bore inspection and fixture checks? The 1.15 mm diameter and 50 mm length make the pin suitable for probing small bores and integrating into fixture‑based verification routines; consult Metav Werkzeuge for fixture compatibility and handling recommendations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.16mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of ±0.001 mm repeatability combined with a 1.16 mm diameter and 50 mm length for precise end‑measure verification; rely on robust workshop construction and rapid part checks. Order the test pin directly via Metav Werkzeuge or consult our metrology advisers for application support. M323.116 Gauge pin — 1.16 mm, ±0.001 mm (Metav IndustryLine) The M323.116 gauge pin is a workshop‑grade precision inspection pin for end‑measure checks and tight‑tolerance verification in micro‑assembly and production inspection. Workshop‑grade construction Diameter 1.16 mm, ±0.001 mm Length 50 mm for deep access Special steel for dimensional stability Precision tailored for micro components Small components demand predictable results. With a declared tolerance of ±0.001 mm and a nominal diameter of 1.16 mm, this gauge pin delivers micrometre‑level certainty for end‑measure applications. The dimensional rating corresponds to the micro category of inspection tools, where compact form and low flex are essential. This accuracy reduces sorting time and lowers the risk of false rejects during go/no‑go checks, improving throughput in fine‑mechanical production and laboratory verification. Robust workshop build for repeatable checks Designed as a workshop edition, the pin is manufactured from special steel to maintain form under regular handling and to resist minor surface wear. The 50 mm length offers access into bores and recessed features while keeping the profile stiff enough for hand‑guided measurements. The simple single‑piece design supports repeatable seating against reference surfaces and can be used as a fixed gauge in fixtures or as a movable inspection probe during manual quality control routines. Easy integration into inspection workflows Traceable identification and a compact footprint make this pin straightforward to log into inspection plans and tool tables. Its small diameter and tight tolerance suit applications such as end‑measure verification of turned parts, pin gauges for assembly jigs, or as reference elements in tactile measuring fixtures. Metav’s extensive metrology range and technical documentation support consistent adoption across workshops and production lines, helping to democratise precision without compromising reliability. Contact Metav Werkzeuge for tailored advice on the M323.116 gauge pin and to discuss compatibility with existing inspection processes at the Emmerich site. Technical Data Article number: M323.116 GTIN: 4061905054372 Label: Test pin, single, 1.16 mm, ±0.001 mm, length 50 mm Dimensions & performance Diameter: 1.16 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Features & materials Material: special steel Version: workshop edition Intended use: end‑measure inspection Category: gauge pins FAQ What tolerance does the gauge pin offer? The M323.116 gauge pin is specified at ±0.001 mm, suitable for micrometre‑grade verification. What are the material and length of the pin? The M323.116 is made from special steel and measures 50 mm in length. Which applications suit this gauge pin? This pin is intended for end‑measure checks, tight‑tolerance inspections, assembly jigs and micro‑component verification. Is the item supplied singly or in a set? The product is supplied as a single gauge pin for flexible use in bespoke inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.17mm Gauge Pin Single ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-ready robustness, sub‑micron accuracy and compact handling for reliable end‑measure checks; the compact 1.17 mm diameter pin with ±0.001 mm tolerance and 50 mm length supports consistent inspection routines. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.117 gauge pin — 1.17 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.117 is a single gauge pin designed for precise end‑measure and go/no‑go checks in workshop and production metrology. Tolerance ±0.001 mm Precision diameter 1.17 mm 50 mm length, workshop version Manufactured from special steel Repeatable accuracy for decisive inspection steps The compact gauge pin delivers a defined reference diameter of 1.17 mm with an accuracy of ±0.001 mm, making it suitable for final dimension verification and pin‑gage checks where small variances matter. The tight tolerance reduces uncertainty during comparative measurements and supports faster decision making on acceptance or rework. Emphasis on measurable performance ensures that inspection routines remain efficient and consistent across batches. Robust workshop design for everyday handling Constructed in special steel and issued as a workshop version, the pin resists everyday wear while retaining its measurement fidelity. The 50 mm shaft provides a practical balance between reach and rigidity for handheld insertion or fixture use, and the compact mass keeps handling straightforward during repetitive tasks. Supplied in a transport case to protect the pin in transit, the design minimises the risk of accidental damage before deployment. Traceability and straightforward integration into quality workflows Marked and catalogued for shop‑floor use, this type of precision pin fits into standard inspection sequences and gauge sets, aiding process documentation and lot tracking. The low mass and precise diameter simplify fixture design and allow stable positioning in gauges or comparator rigs, contributing to repeatable measurements and reproducible outcomes. The combination of defined geometry and workshop robustness makes the component a practical element in both routine quality checks and assembly verification. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge for purchasing and technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific inspection tasks. Technical data Product: Gauge pin, single SKU: M323.117 GTIN: 4061905054389 Facts Diameter: 1.17 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Workshop version Material: special steel Supplied in transport case (plastic or wooden) Suitable for end‑measure checks FAQ What dimensional accuracy can be expected from this gauge pin? The M323.117 gauge pin is specified at ±0.001 mm accuracy, providing sub‑micron repeatability suitable for precise end‑measure verification. Which applications are typical for a 1.17 mm gauge pin? Typical uses include final inspection of bores and pin gauges, comparator checks and assembly verification where a defined small diameter is required. Is the pin protected during delivery? Yes, the gauge pin is supplied protected in a transport case to prevent handling damage before it reaches the workshop. Can this gauge pin be used in a handheld comparator or fixed fixture? The 50 mm length and compact mass make the pin suitable for both handheld comparator work and secure mounting in small fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.18mm Precision Gauge Pin ±0.001 mm, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from sub‑micrometre repeatability, the slim 1.18 mm diameter and a robust 50 mm measuring length for reliable end‑measurements; order the gauge pin directly via Metav Werkzeuge or contact our advisors for application guidance. Metav IndustryLine Gauge Pin M323.118 — 1.18 mm, ±0.001 mm The Gauge Pin M323.118 is a single precision test pin designed for accurate end‑measurements and reference checks in workshop inspection and fixture set‑ups. ±0.001 mm tolerance for sub‑micron accuracy Precision ground 1.18 mm diameter 50 mm effective measuring length Workshop‑grade special steel construction Stability through measured precision The core advantage of this test pin is its ±0.001 mm (1 µm) tolerance, which yields highly reproducible results when used as a reference or stop in inspection routines. Such a fine tolerance reduces measurement scatter and makes control charts more reliable; this is particularly relevant where tight end‑measurements determine part acceptance. The slim 1.18 mm diameter is precision‑ground to ensure concentricity and surface quality, so pin seating and repeatability are improved compared with rougher reference points. Robust design for everyday workshop use Constructed from special steel, the component combines wear resistance with dimensional stability under normal workshop conditions. At an effective 50 mm length the pin offers a balance between reach and rigidity, helping to avoid bending or fretting during insertion and removal. The workshop‑grade finish is optimised for handling and prevents accidental corrosion in standard environments, which extends service life and reduces the need for frequent replacements. Easy integration into inspection and assembly workflows Supplied as a single test pin, the item is suited to use as a gauge for end‑measurements, fixture datum pins, or as a reference for setting up mandrels and plug gauges. Integrating the pin into a measuring routine simplifies traceability: repeated contacts with a defined, precision‑ground surface reduce operator‑dependent variation and help shorten inspection cycles. The compact geometry also supports use in confined assemblies where a larger reference would be impractical. Secure the Metav IndustryLine gauge pin M323.118 with ±0.001 mm accuracy through Metav Werkzeuge—call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and supply options Technical data Article number: M323.118 GTIN: 4061905054396 Label: Prüfstift, einzeln, 1,18mm, +/- 0.001 mm Länge 50 mm Brand: Metav IndustryLine Facts Diameter: 1.18 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: Special steel Delivery form: single test pin Intended use: end‑measurements / reference pin Version: workshop execution FAQ What level of accuracy can be expected from this gauge pin? The gauge pin M323.118 from Metav IndustryLine provides an accuracy of ±0.001 mm, making it suitable for sub‑micrometre reference tasks and tight inspection tolerances. Which applications is this test pin suitable for? This precision test pin is intended for end‑measurements, fixture datum points and reference checks in workshop inspection and assembly environments. What is the material and how does it affect wear? Manufactured from special steel, the pin is designed for improved wear resistance and dimensional stability in standard workshop conditions. Is this item supplied individually or in sets? The product is supplied as a single test pin (single delivery form) ideal for direct use in inspection benches or individual fixture integration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.19mm Gauge Pin ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of sub-micron accuracy, a compact Ø 1.19 mm profile and robust workshop design for reliable end‑measure checks and repeatable alignment. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single (M323.119) – Ø 1.19 mm, ±0.001 mm, 50 mm by Metav IndustryLine Gauge pin M323.119 is a precision reference pin for end‑measure inspections and fixture alignment in workshop environments High precision ±0.001 mm Diameter Ø 1.19 mm for fine gauges Length 50 mm for deep checks Workshop-grade special steel Measure with sub-micron certainty for critical end dimensions The pin delivers ±0.001 mm accuracy, a level that corresponds to a 1 µm tolerance and supports demanding end‑measure inspections where repeatability is essential. This accuracy reduces measurement uncertainty and helps maintain process stability during batch production or quality checks. As a compact reference element, the pin is suitable for precise diameter verification, profile checks and alignment tasks where a clearly defined contact point is required. The design emphasises measurable benefit: fewer ambiguous readings and faster pass/fail decisions on the shop floor. Robust construction and workshop readiness for everyday use Manufactured from special steel and specified as a workshop version, the pin balances hardness with corrosion resistance to withstand regular handling and insertion into gauges or jigs. Its 50 mm length provides sufficient reach for recessed features while the Ø 1.19 mm diameter keeps contact areas small and repeatable. Delivery in a transport box preserves the finish and protects the reference surface during storage and shipment, ensuring the component arrives ready for immediate use. Low mass supports careful handling and minimises impact forces during measurement. Practical applications that streamline inspection workflows Ideal for end‑measure checks, small‑bore verification and fixture set‑up, the pin serves as a compact reference for inspection benches and manual gauge systems. Using a stable reference pin simplifies comparative checks and reduces setup time when aligning fixturing or validating mating parts. The straightforward geometry makes integration into visual routines and dimensional records easy, supporting traceable inspection documentation where a defined reference diameter is required. The combination of fine diameter and high accuracy is particularly useful for microcomponents and precision assemblies. For workshop-ready precision from Metav IndustryLine (SKU M323.119), request this gauge pin via Metav Werkzeuge in Emmerich and consult our specialists for application-specific advice Technical Data SKU: M323.119 GTIN: 4061905054402 Weight: 0.003 kg Length: 50 mm Diameter: 1.19 mm Accuracy: ±0.001 mm Material: Special steel Feature: Workshop version Facts Tolerance class: 0.001 mm (1 µm) Mass: 0.003 kg Nominal diameter: 1.19 mm Nominal length: 50 mm Special features Delivery in transport box (plastic or wooden) Intended use: end‑measure checks and fixture alignment Design: single gauge pin for inspection and verification FAQ What material is the pin made from? The pin is made from special steel; the Metav IndustryLine gauge pin (SKU M323.119) is specified for workshop durability and resistance to routine handling. What accuracy can be expected from this gauge pin? Accuracy is stated as ±0.001 mm (1 µm), providing sub‑micron repeatability suitable for critical end‑measure checks with the Metav IndustryLine pin. Is the pin supplied ready for use or does it require preparation? The pin is supplied protected in a transport box and ready for immediate use in inspection tasks; the finish and tolerance are preserved for direct application. Which inspection tasks are best suited to this pin? Typical applications include end‑measure checks, small‑bore verification and fixture alignment where a defined reference diameter of 1.19 mm is required. Does the product include a certificate or calibration document? No ISO 17025 statement is provided in the product data; calibration documentation is not specified for this item. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.2-6.5mm Probe Holder With Good/Reject Indication - Metav IndustryLine
Take advantage of the combination of clear pass/fail identification, compatibility with a wide range of measuring pins, and a compact, lightweight design to speed up shop‑floor inspection routines. Order the measuring pin holder directly via Metav Werkzeuge or ask our consultants if needed. Measuring Pin Holder M318.562 — for measuring pins 1.2–6.5 mm with 'Good'/'Reject' indication (Metav IndustryLine) The Measuring Pin Holder M318.562 is a compact gauge accessory designed to accept measuring pins from 1.2–6.5 mm, providing immediate visual Good and Reject marking for quick go/no‑go decisions in production inspection. Accepts measuring pins 1.2–6.5 mm Integrated Good / Reject marking Compact 125 mm length Lightweight 0.1 kg Faster decisions with visible pass/fail marking The holder's integrated Good and Reject indication removes ambiguity from routine checks, turning measurement results into immediate action. Fitted into assembly lines or test benches, the accessory reduces interpretation time for operators and supports a consistent inspection workflow. Its simple marking system complements digital or manual gauges, ensuring that a measured value results in an unambiguous status cue, which is especially valuable during volume production or end‑of‑line checks. Robust, compact design for repeatable handling Engineered as a compact fixture at 125 mm, the device is easy to position in jigs and portable test rigs while retaining the stability needed for repeatable checks. At 0.1 kg, it is light enough for handheld use yet rigid enough to hold pins securely during measurement. These attributes help maintain repeatability across frequent cycles, reducing rework and enabling faster cycle times without compromising measurement integrity. Universal compatibility and practical workshop benefits Designed to accept measuring pins from 1.2–6.5 mm, the holder fits a broad range of standard pin gauges used across metalworking and inspection tasks. The straightforward fixture concept minimises setup time and training effort: interchangeable pins can be seated quickly, and the visible status marking integrates into existing quality routines. Supplied as a ready‑to‑use gauge accessory from Metav IndustryLine, it supports efficient quality control where clear visual indication and simple handling matter most. Contact Metav Werkzeuge today to request a quotation for the M318.562 measuring pin holder or to discuss which pin sizes and marking configurations best suit current inspection needs at your facility. Technical data Article number: M318.562 GTIN: 4054469167138 Weight: 0.1 kg Length: 125 mm Tariff code: 90173000 Facts Category: Messstifte / Gauges Compatibility: measuring pins 1.2–6.5 mm Brand: Metav IndustryLine Label: Measuring pin holder with Good / Reject marking Special features Visual Good / Reject identification Compact, low‑weight construction Suitable for workshop and bench inspection Category path: Messstifte; Lehren FAQ What pin diameters does the holder accept? The holder is compatible with measuring pins from 1.2–6.5 mm, allowing flexible use with common pin gauge sets. Is the M318.562 suitable for use on test benches and jigs? Yes, the M318.562’s compact 125 mm length and lightweight build make it well suited for fixed jigs and portable test benches. Does the holder indicate pass and fail visually? The accessory includes clear Good and Reject marking to provide immediate visual pass/fail indication during inspection. Which brand manufactures this measuring pin holder? This holder is supplied under Metav IndustryLine and distributed by Metav Werkzeuge. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.21mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Combine workshop-ready robustness with submicrometre accuracy: the compact 1.21 mm diameter and ±0.001 mm tolerance ensure reliable end-dimension verification in micromechanics and small-part inspection; order the pin via Metav Werkzeuge or consult our specialists for application advice. M323.121 Gauge Pin (single) — 1.21 mm, ±0.001 mm, 50 mm The M323.121 Gauge Pin (single) is an ultra-compact, workshop-grade precision pin for end-dimension checks and micromechanical inspection. Diameter 1.21 mm, high-precision fit Tolerance ±0.001 mm for repeatable checks Workshop‑grade special steel construction Supplied in a protective transport case Accuracy that reduces uncertainty and rework The main strength lies in the ±0.001 mm specification, which delivers a degree of repeatability suitable for demanding end‑dimension controls and plug‑gauge comparisons. A tolerance of this order minimises ambiguous readings and supports consistent go/no‑go decisions on the production line. By using a dedicated, small‑diameter pin the risk of misalignment is reduced, so inspection cycles become more predictable and non‑conforming parts are detected earlier. The compact geometry also lends itself to fine fixtures and measuring nests used in micromechanical assembly. Built for daily workshop use and secure transport Constructed from special steel and finished as a workshop‑grade item, this gauge pin balances wear resistance with practical handling. The 50 mm shaft length offers enough reach for most small‑part checks while remaining easy to manoeuvre by hand or in a fixture. Delivery includes a protective transport case, designed to protect the pin during storage and transit; the case is intended for transport protection rather than permanent workshop storage. These design choices reduce the likelihood of damage and preserve the calibrated condition of the pin between uses. Integrates smoothly into inspection routines Compact, lightweight and precise, the pin is suited to inline quality checks, bench inspection and validation of end dimensions on turned or milled components. The small mass and consistent geometry make it straightforward to use in automated test nests or alongside manual gauging operations. Traceability is supported by the clear article and identification data, helping to document which instrument was used for a given measurement. As a standard workshop tool, it complements broader Metav IndustryLine offerings and fits into procurement strategies that favour repeatable quality and dependable supply. For dependable micro‑gauging in workshop environments, request the M323.121 from Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for implementation guidance and order placement Technical Data Article number: M323.121 GTIN: 4061905054426 Brand: Metav IndustryLine Designation: Gauge pin, single 1.21 mm Facts Diameter: 1.21 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Workshop version Material: Special steel Supplied in protective transport case Category: Gauge pins FAQ What measurement tasks is this pin intended for? The M323.121 gauge pin is designed for end‑dimension verification and precise go/no‑go checks on small mechanical parts where a 1.21 mm diameter reference is required. How tight is the manufacturing tolerance? Manufactured to a tolerance of ±0.001 mm, the pin provides submicrometre repeatability suitable for micromechanics and critical small‑part inspection. Is the pin supplied ready for use in a workshop environment? Yes, the workshop‑grade construction and the supplied protective transport case mean the pin arrives ready for routine use and safe handling in production or inspection areas. Can this pin be used in automated fixtures? The compact geometry and low mass make the pin suitable for use in automated test nests or mounted fixtures for high‑throughput checking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.22mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of sub‑micron repeatability and a compact 50 mm length for reliable end‑measurement tasks; the workshop‑grade construction in special steel ensures practical robustness while the supplied protective transport case keeps each pin safe. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.122 — single gauge pin, 1.22 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) The Gauge pin M323.122 is a single, workshop‑grade test pin designed for precise end measurements and fixture verification in compact inspection routines Single gauge pin, diameter 1.22 mm Tolerance ±0.001 mm for high precision 50 mm special steel length Supplied in protective transport case Sub‑micron accuracy for dependable inspection results The pin delivers an exceptional ±0.001 mm tolerance, which corresponds to one micrometre repeatability — a level of precision that supports tight inspection criteria and dimensional verification. Such accuracy reduces measurement uncertainty when comparing parts to master gauges or setting up plug checks, so deviations are detected early in the process. The fine diameter allows measurement and gauging of small bores and precision features where standard probes are too large. Durable workshop design and ergonomic handling Manufactured from special steel and specified as a workshop version, the pin balances wear resistance with everyday usability. The 50 mm length provides enough engagement for stable seating in fixtures while remaining compact for handheld checks or toolroom benches. The slim profile minimises interference inside tight geometries, and the overall design supports fast, repeatable checks without complex fixturing. Practical integration into quality workflows Intended for end‑measurement tasks and fixture validation, this single gauge pin fits into common metrology routines for component verification and jig set‑up. The item is supplied in a protective transport case to prevent damage in transit and storage. For bespoke testing plans or integration into existing gauge sets, the Metav IndustryLine M323.122 can be specified alongside complementary pins to form matched sets for serial inspection. For reliable micro‑measurement tools from Metav IndustryLine, contact Metav Werkzeuge GmbH for ordering and technical advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.122 GTIN: 4061905054433 ECLASS: 21170231 Category: Messstifte (gauge pins) Facts Diameter: 1.22 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: special steel Workshop execution Supplied in a protective transport case (plastic or wooden) Intended for end measurements and fixture verification FAQ What level of precision does this pin provide? The M323.122 gauge pin offers a tolerance of ±0.001 mm, making it suitable for micro‑precision checks and fine dimensional comparisons in the workshop. Which materials is the pin suited for measuring or checking? As a gauge pin, the M323.122 is used for dimensional verification of machined components regardless of base material; it is a non‑cutting checking instrument rather than a tool for material removal. Is the pin delivered ready for use and protected during transport? Yes, the M323.122 from Metav IndustryLine is supplied in a protective transport case to prevent handling damage and to keep the measuring surface clean during storage and transport. Can the pin be combined with other gauges for serial inspection? The single gauge pin M323.122 can be matched with additional pins to create sets for serial inspection, enabling stepped checks, fixture alignment and comparative measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.23mm Gauge Pin Length 50mm ±0.001mm, Workshop Finish - Metav IndustryLine
Take advantage of the combination of pinpoint accuracy and compact design to ensure repeatable end‑measure checks and reliable workshop use; order directly via Metav Werkzeuge or consult the Metav team for tailored metrology support. Gauge pin M323.123 — 1.23 mm diameter, ±0.001 mm accuracy A Gauge pin M323.123 designed for precise end‑measure checks and fixture verification in workshop metrology *±0.001 mm accuracy for repeatable checks *1.23 mm diameter in hardened special steel *50 mm length for access to recessed features *Workshop version for robust everyday use Accuracy that removes doubt from routine checks The core advantage of this gauge pin is its ±0.001 mm specification, which translates into dependable repeatability for small‑feature inspection and go/no‑go verifications. In practical terms, the extremely tight tolerance reduces measurement scatter and shortens decision cycles during quality control. The small diameter of 1.23 mm makes the pin suitable for verifying tiny bores, locating holes and acting as a reference in assembly fixtures, while the documented accuracy provides a quantifiable basis for process control and traceable measurement results. Designed for consistent handling and accessibility Manufactured from special steel, the pin combines surface hardness with dimensional stability so that routine contact with fixtures and gauges does not alter the reference geometry. At a 50 mm length the component reaches into deeper or recessed features without compromising rigidity, yet remains light at 0.003 kg for safe, one‑hand handling. The workshop variant is intended for everyday industrial use: it balances wear resistance with straightforward integration into pin holders, mandrels or bespoke jigs, helping to maintain cycle times and reduce setup variability. Practical integration into inspection and assembly workflows As a single precision measuring pin, the item functions as a reference element for end‑measure readings, alignment aids and comparative checks. The compact form factor suits fine mechanical environments where space is limited but accuracy cannot be traded off. Where traceability is required, the clear specification of diameter, length and tolerance supports inclusion in inspection plans and documentation. For teams implementing lean metrology routines, the pin offers a simple, low‑intervention means to stabilise repeated checks and to corroborate results from calipers or microscopes when verifying small features. Contact Metav Werkzeuge for expert advice on using the Metav IndustryLine gauge pin in your inspection setup and to arrange supply directly from Emmerich Technical Data Article number: M323.123 GTIN: 4061905054440 Brand: Metav IndustryLine Category: Messstifte Facts Diameter: 1.23 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: special steel Variant: workshop execution ECLASS: 21170231 Label: Prüfstift, einzeln, 1,23mm, +/- 0.001 mm Länge 50 mm FAQ What is the intended use of this gauge pin? The gauge pin M323.123 is intended for precise end‑measure checks, locating small bores and use as a reference element in fixtures. How precise is the measuring pin in practical terms? With a specified tolerance of ±0.001 mm, the M323.123 gauge pin provides repeatable dimensional references for high‑precision workshop inspections. Which material is used for the pin and why does it matter? The pin is made from special steel, chosen for hardness and dimensional stability so that the reference surface remains consistent under normal workshop usage. Can the pin be used with standard pin holders and mandrels? Yes, the single gauge pin is compatible with common holders and can be integrated into mandrels or bespoke jigs for alignment and verification tasks. How does the 50 mm length affect its application? The 50 mm length allows access to recessed or deeper features while maintaining sufficient rigidity for reliable measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.24 mm Gauge Pin, Single, ±0.001 mm, Length 50 mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine tolerance and compact length for reliable plug‑gauge checks in routine workshop metrology. The highly repeatable diameter and workshop execution support efficient throughput and low rework rates. Order directly through Metav Werkzeuge or consult the Metav team for specification matching. Test pin, single, 1.24 mm (M323.124) — Gauge pin with ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) A Test pin, single, 1.24 mm, ±0.001 mm, 50 mm length designed for precise go/no‑go checks and end‑measurement tasks in workshop and inspection environments Ultra‑fine tolerance ±0.001 mm Diameter precisely 1.24 mm Length optimised at 50 mm Made from special steel Precision that reduces uncertainty on the shop floor The small diameter combined with a ±0.001 mm tolerance makes this gauge pin ideal where tight fit checks or end‑measurements decide acceptance. As a compact inspection tool, the pin delivers consistent contact geometry and repeatability in serial checking, reducing the need for time‑consuming rework. In practice, this precision translates into fewer false rejects and a clearer pass/fail decision for small bores and alignment points. Robust material and workshop specification for everyday use Manufactured from special steel and offered in a workshop execution, the pin balances surface hardness with corrosion resistance to withstand handling and repeated insertion cycles. The 50 mm working length gives sufficient engagement for most small‑part inspections while remaining easy to position by hand or in fixtures. The build supports stable results across multiple checks without exaggerated wear, making it a durable choice for routine quality control. Simple integration into inspection routines and fixtures Thanks to the compact 1.24 mm diameter and modest length, the gauge pin integrates easily with bespoke jigs, stack gauges and fixture bores. The compact form factor supports rapid manual checks and can be used as a reference in comparative setups. For documentation purposes the pin is identifiable by SKU M323.124 and is suitable for operators who require a practical, high‑precision gauge for everyday measurement tasks. For procurement of the Metav IndustryLine test pin with guaranteed ±0.001 mm accuracy, contact Metav Werkzeuge for order placement or technical advice Technical Data Article number: M323.124 GTIN: 4061905054457 Brand: Metav IndustryLine Weight: 0.003 kg Facts Diameter: 1.24 mm Length: 50 mm Tolerance: ±0.001 mm Special features Material: Special steel Version: Workshop execution Category: Gauge pin / test pin FAQ What tolerance can be expected from this test pin? The test pin M323.124 is specified to ±0.001 mm, providing ultra‑fine control for go/no‑go and end‑measurement tasks with high repeatability. Is the pin suitable for use in fixture and jig mounting? Yes, the gauge pin’s 1.24 mm diameter and 50 mm length make it suitable for integration into small fixtures and comparative jigs used in routine inspection. Which materials is this gauge pin compatible with for checking bores? The pin is intended as a reference element for dimensional checks and is material‑agnostic regarding the part being measured; the pin itself is made from special steel for durability. How is the item identified when ordering? Order by SKU M323.124 or GTIN 4061905054457 to ensure the correct Metav IndustryLine test pin with the stated tolerance and dimensions. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.25mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
High‑precision test pin performance with ±0.001 mm repeatability and a compact 1.25 mm probe diameter delivers reliable end‑measurement checks; combined with a robust special steel shaft and protective transport case, it supports consistent gauge and inspection workflows. Order the test pin directly via Metav Werkzeuge or consult our technicians for integration advice. Test pin M323.125 – 1.25 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) A Test pin M323.125 designed for precise end‑measure verification and gauge applications, supplied in workshop specification with a 50 mm shaft length. ±0.001 mm high repeatability 1.25 mm probe diameter 50 mm hardened special steel shaft Workshop finish with transport case Consistent measurement where micrometre precision matters The gauge offers ±0.001 mm repeatability on a slender 1.25 mm probe, which makes it suited to fine end‑measure checks and tight‑tolerance fixtures. Manufactured to tight tolerances, the probe minimises runout and measurement uncertainty during repetitive checks. This level of precision supports rational measurement regimes, reducing rework and ensuring components meet specified end dimensions with measurable confidence. The compact probe geometry also simplifies access to small bores and features while maintaining stability. Robust workshop design for frequent handling Constructed from special steel and finished for workshop use, the probe combines corrosion resistance with the mechanical strength required for repeated seating and withdrawal in gauge setups. The 50 mm shaft balances accessibility with stiffness, while the low mass (0.003 kg) reduces inertia during rapid inspection cycles. Delivery in a protective transport case preserves dimensional integrity during storage and transit, limiting the risk of damage and supporting longer service life under everyday production conditions. Practical deployment across inspection and tooling tasks This single‑piece gauge serves as a reliable reference in closing measurements, fixture set‑up and plug gauge routines. The small diameter probe integrates easily into comparator stands and fixture plates, and its workshop specification simplifies mounting in test rigs. Supplied as an individual probe, the item is ideal for replacing worn pins or extending an existing gauge set without altering established inspection procedures. The M323.125 therefore supports efficient, repeatable workflows in toolrooms and inspection stations. Choose the Metav IndustryLine M323.125 for dependable end‑measure checks and contact Metav Werkzeuge GmbH in Emmerich for supply and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.125 GTIN: 4061905054464 Label: Test pin, single, 1.25 mm, ±0.001 mm, length 50 mm Brand: Metav IndustryLine Facts Diameter: 1.25 mm Shaft length: 50 mm Accuracy / repeatability: ±0.001 mm Weight: 0.003 kg ECLASS: 21170231 Special features Material: Special steel Workshop specification Supplied single, without additional pieces Delivered in transport case for protection Intended for end‑measure and gauge applications FAQ What accuracy can be expected from this probe? The probe delivers ±0.001 mm repeatability as specified for the M323.125 test pin from Metav IndustryLine. Is the probe suitable for use in fixture plates and comparator stands? Yes, the 50 mm shaft and 1.25 mm diameter make it compatible with standard fixture and comparator mounting arrangements. Does the delivery include a protective container? The test pin is supplied in a transport case to protect the probe during handling and storage. Which materials is the shaft made from? The shaft is manufactured from special steel, chosen for strength and workshop durability. Can this item replace worn pins in an existing gauge set? The single‑piece design of the M323.125 makes it suitable for replacing individual worn pins without requiring changes to existing gauge assemblies. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.26mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
The combination of ±0.001 mm tolerance, a 1.26 mm diameter and a 50 mm length delivers repeatable end‑measure checks with minimal setup time; benefit from reduced inspection uncertainty and consistent fit Gauging. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application support. M323.126 Gauge Pin — 1.26 mm, ±0.001 mm, 50 mm (Metav IndustryLine) M323.126 Gauge Pin is a single precision test pin for fine plug and end‑measure verification in workshop environments Diameter 1.26 mm for fine features Tolerance ±0.001 mm for high precision Length 50 mm, workshop design Special steel construction for durability Ensured measurement certainty for small bores and fits The pin provides a ±0.001 mm tolerance that supports critical go/no‑go checks and dimensional verification in assembly and inspection routines. With a 1.26 mm nominal diameter, this test pin is designed for fine bore gauging where repeatability matters; the tight tolerance reduces measurement scatter and helps to avoid false rejects in quality control. The compact form factor also shortens handling time during batch inspections, contributing to a more efficient workflow. Durable workshop construction that resists wear Made from special steel and finished for workshop use, the pin resists surface damage that could otherwise change the functional diameter over repeated cycles. The 50 mm length gives sufficient engagement depth for many plug checks while remaining rigid during handling, thereby limiting deflection and preserving dimensional integrity. These material and dimensional decisions translate into longer service life and lower replacement frequency compared with softer or shorter alternatives. Practical integration into quality processes The gauge pin is intended for direct use in inspection benches, plug‑gauge assemblies and manual gauging processes where small, precise diameters are required. Its straightforward geometry simplifies calibration and routine verification. Traceability is supported by the product data and GTIN for inventory control, enabling clear documentation in quality records and easier part tracking in regulated manufacturing environments. For specific application advice or to confirm suitability for a particular tolerance chain, contact Metav Werkzeuge for technical guidance and procurement assistance Technical data Article number: M323.126 GTIN: 4061905055201 Category: Messstifte Numbers / Core technical data Diameter: 1.26 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Accuracy designation: ±0.001 Materials / Special features Material: Special steel Version: Workshop design ECLASS: 21170231 Single piece delivery FAQ What tolerance can be expected from this gauge pin? The gauge pin is specified with a tolerance of ±0.001 mm, ensuring high repeatability for fine bore checks. Is the pin suitable for repeated plug‑gauge cycles in a production line? Yes, the special steel construction and workshop design of the pin support frequent use and help maintain dimensional stability over repeated cycles. How deep should the pin engage when checking a bore? Engagement depth depends on the inspection requirement, but the 50 mm overall length offers adequate penetration for most plug and end‑measure verification tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com