Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
17.75mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the precise ±0.002 mm tolerance, the Ø17.75 mm diameter and the robust special steel construction for reliable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or contact our consultants for batch supply and specification support. M323.H75 gauge pin — single test pin, Ø17.75 mm, 50 mm length The M323.H75 is a single gauge pin designed for precise end‑measurement and fit verification in workshop and inspection environments, supplied in a protective case for safe transport and storage. Precision tolerance ±0.002 mm Diameter Ø17.75 mm, length 50 mm Made from special steel Delivered in protective case Engineered for repeatable precision in inspection tasks The measuring pin is manufactured and finished to a tolerance of ±0.002 mm, which ensures consistently repeatable results when verifying bores, gauges and assembly fits. This level of accuracy places the component in the high‑precision segment of workshop gauging tools and reduces rework rates by narrowing the uncertainty of a single pass test. The tight tolerance is combined with a true cylindrical form and smooth finish, so the pin seats reliably in mating features without introducing measurement artefacts; this supports efficient, evidence‑based quality control and shortens inspection cycles. Robust material and safe handling for daily workshop use Constructed from special steel, the pin offers enhanced wear resistance and dimensional stability under routine use. The workshop version specification reflects practical design choices: short, balanced geometry for easy manual handling and a surface finish that tolerates regular cleaning and light lubricants. Delivery in a protective case preserves the gauge geometry during transport and storage, preventing nicks that would compromise accuracy. Together these attributes make the pin a low‑maintenance, long‑service solution for repetitive fit checks. Fits smoothly into production and inspection workflows As a compact, single‑piece gauge pin, the item integrates with standard inspection benches and manual checking procedures; its form factor is ideal for quick pass/fail assessments and setup confirmations. The clear dimensional designation simplifies inventory picking and traceability in statistical process control (SPC) routines. For customised kit composition or recurring supply contracts, Metav IndustryLine offers tailored advice to align batches with inspection frequency and traceability requirements — technical consultants can advise on quantities, storage and handling to optimise uptime and measurement confidence. Contact Metav Werkzeuge today to discuss batch availability of the Metav IndustryLine M323.H75 gauge pin or to request a recommendation matched to specific inspection tolerances Technical data SKU: M323.H75 GTIN: 4061905070983 Category: Gauge pins (Messstifte) Label: Gauge pin, single, Ø17.75 mm, 50 mm length Manufacturer: Metav IndustryLine Facts Diameter: 17.75 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Delivered in protective case for transport and storage High concentricity and smooth finish for repeatable seating FAQ What inspection tasks is this gauge pin suited for? The M323.H75 gauge pin is intended for end‑measure checks, bore verification and fit testing where a precisely defined cylindrical reference of Ø17.75 mm and ±0.002 mm tolerance is required. Is the pin suitable for continuous workshop use? Yes, the workshop‑grade construction and special steel material make the M323.H75 robust for daily use; the protective case helps prevent handling damage that could affect accuracy. How should the gauge pin be stored to maintain accuracy? Store the M323.H75 in its protective case in a clean, dry environment and avoid contact with corrosive agents; periodic visual checks for nicks or wear are recommended to preserve measurement reliability. Can this gauge pin be supplied in larger quantities for production lines? Bulk supply of the M323.H75 is available; Metav IndustryLine can advise on batch sizing and traceability options to match production‑line inspection schedules. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.76mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of industrial robustness, tight tolerance and compact handling for reproducible end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.H76 — 17.76 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin M323.H76 is a single precision test pin made from special steel, designed for reliable end‑dimension verification and workshop measurement tasks. Workshop version for robust daily use Diameter exactly 17.76 mm for end‑dimension checks Length 50 mm for compact gauge setups Tolerance ±0.002 mm for tight precision Consistent fit for end‑dimension verification The gauge pin offers a defined cylindrical reference with 17.76 mm nominal diameter and a verified tolerance of ±0.002 mm, making it suitable for high‑confidence verification of bore and shaft end dimensions. Such a tolerance level converts into measurable repeatability during sample checks and pass/fail inspections; the narrow ±0.002 mm band reduces ambiguity when comparing measured values to drawing limits. For workshop quality control and batch sampling, this precision supports faster decisions and fewer remeasurements, so inspection throughput improves without sacrificing accuracy. Durable construction that suits daily workshop use Built as a workshop version, the test pin is manufactured from special steel to resist wear during frequent engagement with fittings and gauges. The compact 50 mm length balances accessibility and stiffness, keeping handling straightforward while limiting deflection in confined fixtures. The modest mass (0.15 kg) makes the pin easy to install into test assemblies or holding devices, while the robust material choice prolongs service life and reduces replacement intervals — a practical advantage where uptime and tool longevity matter. Seamless integration into inspection routines and inventory The item is supplied individually and labelled for easy identification in toolrooms and stores; traceability is supported by the SKU and GTIN for stock management. As a dedicated cylindrical reference, it complements handheld callipers, bore gauges and go/no‑go systems, accelerating setup for end‑dimension checks and calibration tasks. Using a standardised gauge pin reduces setup variation between operators and equipment, which in turn streamlines quality documentation and supports consistent production outcomes. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for ordering and technical advice via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: M323.H76 GTIN: 4061905071607 Label: Prüfstift, einzeln, 17,76 mm Länge 50 mm Core specifications Diameter: 17.76 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Features / Material Material: special steel Version: workshop execution Application: end‑dimension checks Category: gauge pin (Messstifte) FAQ What diameter and length does the pin have? The gauge pin M323.H76 from Metav IndustryLine has a nominal diameter of 17.76 mm and a working length of 50 mm (SKU M323.H76). What precision can be expected from this test pin? The test pin is specified with a tolerance of ±0.002 mm, making the M323.H76 suitable for tight end‑dimension verification tasks in workshop and inspection environments. Is the pin suitable for frequent workshop use? Yes, the workshop version of this gauge pin is made from special steel and is designed for robust daily handling and repeated engagement in measuring setups. Is the item supplied individually or as part of a set? This product is supplied individually; the label indicates a single gauge pin for straightforward replacement or targeted use. Which measurement tasks is this pin intended for? The M323.H76 is intended primarily for end‑dimension checks and as a cylindrical reference in inspection routines, complementing callipers, bore gauges and go/no‑go tests. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.77mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of high reproducibility through a fine manufacturing tolerance and the robust special‑steel construction for reliable end‑dimension checks; the 17.77 mm diameter and 50 mm overall length ensure stable handling in inspection fixtures. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.H77 — single precision test pin, 17.77 mm × 50 mm (Metav IndustryLine) The gauge pin is a single, precision test pin designed for end‑dimension verification and fixture use in workshop and inspection settings. 17.77 mm diameter, 50 mm length ±0.002 mm manufacturing tolerance Special steel for workshop durability Precision for repeatable inspection tasks The workshop‑grade test pin delivers fine repeatability thanks to a manufacturing tolerance of ±0.002 mm, making it suitable for dimensional verification where small deviations matter. A diameter of 17.77 mm combined with a 50 mm overall length provides a compact but stiff probing geometry that reduces lateral flex and improves the reproducibility of seating and alignment checks. Measurements that rely on consistent contact surfaces benefit from the stable geometry, so inspection jigs and go/no‑go fixtures can operate with predictable results and lower scrap rates. Robust construction that stands up to daily use Constructed from special steel in a workshop version finish, the pin resists wear during repeated insertion and withdrawal cycles and keeps the measuring surface intact over time. The slightly weighted design aids handling in manual setups while maintaining a compact footprint for multi‑pin arrays and gauge blocks. The material choice and craftsmanship support long service intervals and reduced rework for maintenance teams, translating into less downtime and a steadier throughput in routine quality control. Easy integration into metrology processes As a single‑piece test pin, the component is ready for immediate integration into inspection fixtures, locating systems and custom gauges. The clear specification of 17.77 mm diameter and the documented ±0.002 mm tolerance simplify planning for fitting and clearance in assemblies. Traceability is supported by the listed SKU and GTIN, facilitating inventory control and replacement planning within established procurement workflows. Supply from a recognised brand streamlines sourcing and helps maintain a consistent quality filter across production lines. For reliable end‑dimension verification choose Metav IndustryLine’s M323.H77 via Metav Werkzeuge for assured supply and technical guidance Technical data Article number: M323.H77 GTIN: 4061905071614 Brand: Metav IndustryLine Label: Gauge pin, single, 17.77 mm diameter, 50 mm length Material: Special steel Core specifications Diameter: 17.77 mm Length: 50 mm Manufacturing tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop execution Single test pin for end‑dimension checks Compact geometry for reduced lateral flex FAQ What are the exact dimensions of this gauge pin? The gauge pin M323.H77 has a diameter of 17.77 mm and an overall length of 50 mm. What tolerance can be expected from the pin? A manufacturing tolerance of ±0.002 mm is specified for the M323.H77, supporting fine repeatability in inspection tasks. Which material is the pin made from? The pin is made from special steel and specified as a workshop execution for enhanced durability. Is the pin intended for fixture and gauge integration? Yes; the single, compact design of the test pin is intended for use in inspection fixtures, locating systems and custom gauges. How is traceability handled for ordering and inventory? Traceability is supported via the SKU M323.H77 and GTIN 4061905071614 for straightforward procurement and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.78mm Test Pin Single 50mm Length Workshop Version - Metav IndustryLine
Taking advantage of a compact gauge pin with a precise 17.78 mm diameter, robust special steel construction and a practical 50 mm length ensures reliable end‑dimension checks and consistent workshop performance; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, Ø 17.78 mm · 50 mm length (Metav IndustryLine) A single gauge pin designed for precise end‑dimension inspection in workshop and production environments, combining a compact form with workshop‑grade durability. Workshop version for robust daily use 17.78 mm diameter for end‑dimension checks 50 mm length for recessed measurements Manufactured from special steel Precision where it matters: accurate end‑dimension checking The compact design delivers a controlled contact surface for repeatable end‑dimension verification, with a stated accuracy of ±0.002 mm that supports fine measurement tasks. The hardened contact area and the reduced form‑tolerance minimise deformation during use, so the pin keeps true to nominal size across many cycles. For production sampling or fixture set‑up, the consistent geometry reduces rework and shortens inspection time while maintaining traceable measurement results. Built for workshops: rugged materials and handling benefits Constructed from special steel, this workshop‑grade pin tolerates the knocks and handling of daily use without sacrificing measurement integrity. The 50 mm shank provides sufficient reach for recessed or countersunk bores while remaining easy to locate and position in tight setups. Delivery in a protective case included simplifies transport and safeguards the gauge pin during storage, reinforcing a dependable tool life in busy environments. Workflow advantages: simple, fast integration into inspection routines The single‑piece configuration fits standard gauge pin holders and inspection jigs and is suitable for rapid go/no‑go checks as well as comparative measurements on fixtures. Its compact footprint supports efficient handling in batch inspection and reduces cycle time when checking multiple parts. The combination of small diameter and workshop robustness makes this item particularly useful for end‑dimension control during assembly, maintenance and quality spot checks. Quality assurance and traceability The item is supplied with clear identification (SKU M323.H78, GTIN 4061905071621) to support inventory control and traceability in quality documentation. Weight and dimensions are minimal, aiding straightforward integration into tool drawers and measurement sets, while the workshop design aligns with common industrial inspection practices, ensuring compatibility with existing metrology workflows. For reliable end‑dimension control choose the Metav IndustryLine gauge pin M323.H78 — contact Metav Werkzeuge for technical clarification or to place an order, and benefit from local stock and application advice. Technical data Article number: M323.H78 GTIN: 4061905071621 Brand: Metav IndustryLine Category: Gauge pins Facts Diameter: 17.78 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Single test pin Delivery in protective case FAQ What tolerances can be expected with this gauge pin? The Metav IndustryLine gauge pin M323.H78 is specified with an accuracy of ±0.002 mm, making it suitable for fine inspection tasks and reliable end‑dimension checks in workshop environments. Is the gauge pin suitable for recessed bores? Yes, the 50 mm length provides reach for recessed or partially blind bores while the compact diameter enables precise seating and verification of end dimensions. What material is the pin made from and how does that affect durability? The pin is manufactured from special steel, chosen for wear resistance and robustness under workshop conditions, which helps preserve nominal dimensions through repeated use. Can this pin be used in fixture set‑ups and quick go/no‑go checks? Its single‑piece design and workshop specification make the M323.H78 well suited for integration into fixture set‑ups and rapid go/no‑go inspections where consistent contact geometry is required. How is the gauge pin delivered and how should it be stored? The gauge pin is supplied in a protective case to simplify transport and reduce risk of damage; dry, organised storage in the case is recommended to maintain measurement accuracy. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.79mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Reliable workshop inspection: the combination of a precise 17.79 mm diameter, ±0.002 mm tolerance and a robust 50 mm overall length ensures repeatable end‑dimension checks and dependable fit control. Order the inspection pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.H79 – inspection pin, 17.79 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.H79 is a single inspection pin designed for precise end‑dimension checks in workshop applications, providing a compact, stable reference for go/no‑go and fit verifications. Precision diameter 17.79 mm Workshop grade special steel 50 mm overall length for end‑measure checks Precise control for repeatable end‑dimension checks The inspection pin offers a defined diameter of 17.79 mm with a measured tolerance of ±0.002 mm, making it suitable where tight clearance and consistent fit are critical. The small form factor gives low flex under contact pressure, so the component interaction remains stable during repeated measurements. This results in faster quality decisions and reduced rework in assembly or incoming inspection operations, because each insertion delivers a reliable go/no‑go indication. Durable construction for everyday workshop use Manufactured from special steel in a workshop specification, the pin resists wear and maintains its critical diameter over many cycles. The 50 mm overall length supplies enough engagement for end‑measure verification without adding unnecessary handling weight, while the robust finish tolerates standard workshop conditions. The result is a practical instrument that blends longevity with low maintenance, suitable for both bench checks and use in simple gauge fixtures. Practical measurement benefits and ease of integration The single‑piece design simplifies storage and identification in inspection sets and fixtures. With low mass and compact dimensions, the pin integrates into existing plug‑gauge rigs and checking stations without modification. Its tight tolerance supports reliable tolerance stacking analysis during assembly trials, enabling production engineering teams to validate fits quickly and document acceptance criteria with confidence. Ideal for fine mechanical and workshop applications Classified in the micro range for small‑part inspection (max range 10–100 mm), this inspection pin is especially well matched to precision fitting tasks in toolmaking, small‑batch assembly and end‑of‑line checks. The combination of repeatability and minimal setup time supports throughput improvements while preserving measurement integrity — a pragmatic balance between workshop convenience and laboratory‑grade precision. For dependable end‑dimension verification choose the Metav IndustryLine inspection pin from Metav Werkzeuge; contact our advisors at info@metav-werkzeuge.com or +49 2822 7131930 for technical guidance and order support Technical data Article number: M323.H79 GTIN: 4061905071638 Label: Prüfstift, einzeln, 17,79 mm Länge 50 mm Facts Diameter: 17.79 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version (Werkstatt‑Ausführung) Material: special steel Single inspection pin for end‑measure checks Suitable for precision go/no‑go and fit verification FAQ What is the declared tolerance of this inspection pin? The inspection pin M323.H79 is specified with a tolerance of ±0.002 mm, providing high repeatability for fit and clearance checks. Can this pin be used for routine assembly inspection in a workshop? Yes, the Metav IndustryLine inspection pin is designed as a workshop version, combining durable special steel construction with a compact 50 mm length for practical routine checks. Is the diameter exactly 17.79 mm for gauging nominal fits? The nominal diameter is 17.79 mm; the pin is manufactured and inspected to meet the stated tolerance of ±0.002 mm for dependable gauging performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.7mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Combine precision tolerance ±0.002 mm, robust special steel construction and a compact 50 mm length for repeatable end‑measure checks in workshop environments; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Test pin, single, 17.7 mm diameter, 50 mm length (Metav IndustryLine) Test pin, single, 17.7 mm, 50 mm length is a compact inspection component for dimensional verification, designed for fixture set‑up, end‑measure controls and workshop quality checks. Workshop‑grade special steel Precision tolerance ±0.002 mm 17.7 mm diameter, 50 mm length Reliable accuracy for routine inspection The compact inspection component delivers a tolerance of ±0.002 mm, making it suitable for tasks where small deviations matter. The controlled tolerance reduces uncertainty in go/no‑go assessments and comparative checks, so measurement routines become more predictable. Built for frequent use, this type of gauge pin offers consistent contact geometry that simplifies repeatability in bench checks and fixture validation, translating into fewer reworks and clearer pass/fail decisions. Robust make for everyday workshop use Manufactured from special steel, the pin resists wear under regular contact with common shop surfaces while maintaining dimensional stability. With a 50 mm shank and a 17.7 mm diameter, the component balances stiffness and handling: the length is short enough to limit bending yet long enough for secure clamping in fixtures. Its workshop‑grade execution means the component tolerates routine handling, making it a pragmatic choice for production environments and service benches where durability and straightforward use are priorities. Practical compatibility and handling advantages The cylindrical design supports standard holding methods in inspection jigs, alignment tools and transfer fixtures. The compact weight (approx. 0.15 kg) and round profile ease insertion and removal during batch checks and single‑piece verification. Where interchangeability matters, the precise diameter and consistent surface ensure reliable seating in mating bores or reference blocks. This inspection tool is therefore well suited to applications in general metalwork, toolrooms and maintenance operations that require fast, reproducible dimensional checks. Traceability and supply reliability for production workflows Supplied as a single item designed for day‑to‑day measurement tasks, the pin is identified by SKU M323.H70 and a GTIN for inventory control and procurement. Metav’s European distribution from Emmerich provides a quality filter for industrial buyers seeking dependable sourcing and stock continuity. Combining measurable accuracy, resilient material choice and compact geometry, this inspection pin supports stable process control without adding complexity to established inspection routines. Select the Metav IndustryLine test pin for dependable workshop measurement and contact Metav Werkzeuge in Emmerich for technical details and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.H70 GTIN: 4061905070938 Manufacturer: Metav IndustryLine Facts Diameter: 17.7 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Material: Special steel Delivery: single test pin Version: Workshop execution FAQ What is the primary use of this gauge pin? The gauge pin M323.H70 is intended for dimensional verification, end‑measure checks and fixture set‑up in workshop and production inspection routines. Is the diameter suitable for seating checks and alignment? Yes, the 17.7 mm diameter provides a defined contact surface for seating checks, alignment tasks and compatibility with mating bores in fixtures. Can this pin withstand frequent handling in a production environment? The workshop execution and special steel construction of the pin are designed for regular use and maintain dimensional stability under standard handling conditions. How is the component identified for procurement and inventory? Identification is via SKU M323.H70 and GTIN 4061905070938, which supports ordering, stock control and traceability. Is the pin supplied as an individual item or in sets? This product is supplied as a single test pin, suitable for replacement or addition to existing inspection kits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.81mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Achieve reliable end‑gauging with ±0.002 mm tolerance, durable special steel construction and a compact 50 mm overall length for consistent inspection results. Order the gauge pin directly via Metav Werkzeuge or consult their advisors for application support and matching workshop equipment. Gauge pin 17.81 mm — single gauge pin, 50 mm length, workshop grade (Metav IndustryLine) A gauge pin 17.81 mm engineered for precise end‑measurement and quick go/no‑go checks in workshop and inspection environments Precision tolerance ±0.002 mm Special-steel workshop design 50 mm overall length, 17.81 mm diameter Consistent dimensional control for routine inspection The compact pin is specified with a tolerance of ±0.002 mm, which places it in the category of high‑precision gauge elements for workshop inspection. This level of accuracy ensures repeatable end‑measurements and reliable pass/fail checks when used in gauges, fixtures or with comparison mandrels. By specifying the exact diameter of 17.81 mm and a controlled length of 50 mm, the pin reduces ambiguity in measurement protocols and supports efficient quality decisions without elaborate setup procedures. Durable design suited to workshop handling Manufactured in special steel and labelled as a workshop execution, the pin is intended to withstand regular handling and insertion into test rigs. The material choice and single‑piece construction provide mechanical stability and reduced surface distortion under standard use. The modest mass of 0.15 kg aids handling and positioning while maintaining sufficient inertia to sit securely in fixtures. These attributes translate to lower downtime for replacements and predictable service intervals in production or inspection loops. Practical integration into metrology workflows This gauge element is intended for end‑measurement tasks, seating as a reference or master pin in bench testing and alignment procedures. The plain geometry and clearly stated dimensions allow straightforward incorporation into go/no‑go setups, depth checks and comparative trials. Because the specification is concise and comparable, procurement and inventory management benefit from unambiguous labelling and rapid cross‑referencing with drawing tolerances and inspection plans. Benefits for production and quality assurance Using a defined gauge pin reduces measurement scatter and supports traceable decision making across repetitive operations. The combination of a precise diameter, workshop robustness and compact 50 mm length is particularly suited to small to medium assemblies where spatial constraints demand short gauge elements. When paired with stable fixtures, the pin contributes to faster inspection cycles and fewer rework instances, supporting overall process efficiency and quality consistency. Contact Metav Werkzeuge for application advice and to source Metav IndustryLine gauge pins for precise workshop inspection needs. Technical data Article number: M323.H81 GTIN: 4061905449123 Manufacturer: Metav IndustryLine Data Diameter: 17.81 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop execution Single gauge pin, individual item Accuracy class: high‑precision inspection element FAQ What level of accuracy does this gauge pin provide? The gauge pin is specified with an accuracy of ±0.002 mm, making it suitable for high‑precision workshop inspection and repeatable end‑measurement tasks. Is the material corrosion‑resistant? The pin is made from special steel and supplied in a workshop execution; surface behaviour depends on the specific steel alloy and shop conditions—appropriate storage and handling are recommended for longevity. Can this gauge pin be used in go/no‑go fixtures? Yes, the gauge pin with a defined diameter of 17.81 mm and 50 mm length is suited for use as a master or reference element in go/no‑go fixtures and alignment jigs. What is the SKU and brand for ordering? The item is listed as SKU M323.H81 and supplied under the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.82mm Test Pin, Single, 50mm Length, Special Steel, Workshop Version - Metav IndustryLine
Take advantage of the combination of pinpoint 17.82 mm nominal diameter, ±0.002 mm accuracy and robust special steel construction for reproducible end‑measurement checks in routine inspection. Order the test pin directly via Metav Werkzeuge or consult our advisers for specification matching. M323.H82 Test pin (single) — 17.82 mm diameter, 50 mm length A M323.H82 test pin designed as a workshop‑grade gauging pin for precise end‑measurements and fit checks in component inspection and quality control. Workshop‑grade build for daily inspection Nominal diameter 17.82 mm Tight tolerance ±0.002 mm Precision where repeatability matters The instrument is a dedicated gauge pin specified to a nominal diameter of 17.82 mm with a stated variation of ±0.002 mm, making it suitable for tight tolerance checks and pass/fail verifications in production. The small footprint and fixed 50 mm length deliver a stable contact geometry that reduces measurement scatter; the defined contact surface gives clear, reproducible reference points for end‑of‑line inspection. Presented as a single‑piece test pin, the component supports straightforward integration into manual or fixture‑based gauging routines, where repeatability and traceable dimensions are the priority. Designed for robust workshop inspection Built as a workshop‑grade tool from special steel, the pin resists routine wear and maintains its nominal diameter across many inspection cycles. The material choice and machining tolerance translate into reliable surface quality and hardness that reduce scoring and minimise measurement drift during frequent use. For applications such as bore verification, alignment checks and final dimensional control, the tool provides a rugged, low‑maintenance option that supports consistent results without the complexity of adjustable gauges. Practical handling and measurement benefits The single‑pin format simplifies handling and storage while providing a clear metrological function for end‑measurement tasks. Its compact length and defined shank make it easy to align in jigs or to use as a master reference in comparative checks. The product's straightforward geometry eases operator training and speeds routine inspections, improving throughput where cycle time and repeatable quality are essential. Where traceability or batch matching is needed, the clear nominal and tolerance data support documentation and quality records. For reliable end‑measurement control choose the Metav IndustryLine M323.H82 test pin — contact Metav Werkzeuge in Emmerich for order details and application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M323.H82 GTIN: 4061905449130 eClass: 21170231 Label: Test pin, single, 17.82 mm, length 50 mm Category: Messstifte / Gauge pin Facts Nominal diameter: 17.82 mm Length: 50 mm Weight: 0.15 kg Accuracy/variation: ±0.002 mm Material: Special steel Special features Workshop version (Werkstatt‑Ausführung) Single test pin configuration Intended for end‑measurement and fit checks Suitable for routine inspection and fixture use FAQ What is the nominal diameter and tolerance of the pin? The M323.H82 test pin has a nominal diameter of 17.82 mm with a stated variation of ±0.002 mm, specified for precise end‑measurement tasks. Which material is used for this gauge pin? This gauge pin is manufactured from special steel, selected to provide wear resistance and stable contact geometry for repetitive inspection. For which inspection tasks is this pin suitable? Typical uses include bore verification, alignment checks, fit and end‑measurement controls in workshop and production environments where a fixed, repeatable reference is required. Can this test pin be used in a gauging fixture or jig? Yes. The single‑piece construction and defined 50 mm length make the pin well suited for integration into fixtures and manual inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.83mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-grade construction, exact tolerance ±0.002 mm and a compact form factor to secure consistent end‑measure inspections. Order the test pin directly via Metav Werkzeuge or consult our specialists for application advice. Test Pin M323.H83 — workshop test pin, Ø 17.83 mm, 50 mm length (Metav IndustryLine) A Test Pin M323.H83 designed for precise end‑measure checks and robust use in workshop fixtures and gauge assemblies. Workshop version for daily industrial use Diameter 17.83 mm for accurate fits Length 50 mm for stable seating Tolerance ±0.002 mm for high precision Repeatable accuracy for end‑measurement tasks The pin is specified with a tolerance of ±0.002 mm, delivering a level of repeatability that supports reliable end‑measure inspections and dimensional checks. Such precision reduces uncertainty in comparative measurements and helps maintain process stability when used in plug gauges, comparator set‑ups or fixture alignment. The combination of a fine tolerance and compact geometry translates into measurable time savings during routine inspection cycles and fewer rejects downstream. Robust design for everyday workshop use Built as a workshop version from special steel, the pin balances wear resistance with dimensional stability. The Ø 17.83 mm diameter and 50 mm length provide a stable seating in holders and jigs while remaining compact enough for tight assemblies. The robust material choice ensures consistent contact behaviour under repeated usage, keeping surface interaction predictable and minimising profile wear over time. Delivery includes a dedicated transport case to protect the pin during storage and transit. Practical integration and traceability in production Intended for use in end‑measure control, fixture verification and go/no‑go checks, this pin integrates smoothly into existing inspection routines thanks to its standard geometry and clearly referenced identifiers. The item is listed under SKU M323.H83 and GTIN 4061905449147, supporting inventory management and traceability in procurement records. Wherever precise plug‑type probes are required for alignment or comparative gauging, the compact construction and defined tolerance make this pin a dependable option for workshop and light industrial environments. For secure supply of workshop‑grade test pins and practical advice, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 — Metav IndustryLine stock and consultancy available Technical Data SKU: M323.H83 GTIN: 4061905449147 Description: Test pin, single, Ø 17.83 mm, 50 mm length Core specifications Diameter: 17.83 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Materials & Features Material: Special steel Workshop version Delivery in transport case FAQ What is the declared tolerance of this test pin? The declared tolerance for the Test Pin M323.H83 is ±0.002 mm, suitable for precise comparative measurements and end‑measure checks. Which materials is the pin suitable for when used in fixtures? The test pin is manufactured from special steel and is intended as a robust contact element for typical workshop fixtures and gauge assemblies. Is the pin delivered protected for transport and storage? Yes, the Test Pin M323.H83 is supplied with a transport case to protect the component during transit and storage. Can this pin be used in comparator set‑ups and go/no‑go gauges? The pin’s geometry and tolerance make it appropriate for comparator stations and plug‑type gauge arrangements where stable seating and repeatable contact are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.84mm Gauge Pin, 50mm Length, Workshop Version - Metav IndustryLine
Combine precision (±0.002 mm), workshop-grade durability and compact dimensions for consistent end‑measurement results; order the gauge pin directly via Metav Werkzeuge or request advice from our consultants if required. Gauge pin M323.H84 — 17.84 mm diameter, 50 mm length (Metav IndustryLine) A Gauge pin M323.H84 designed as a workshop‑grade end‑measurement pin for checking bore dimensions and finish tolerances in precision assembly and tool rooms Workshop version: robust construction Diameter 17.84 mm for end‑gauging Tolerance ±0.002 mm high precision Supplied in protective transport case Repeatable, high‑precision end measurements The measuring pin is intended for repeatable verification of end dimensions and bore sizes where small deviations matter. With a nominal diameter of 17.84 mm and a declared runout tolerance of ±0.002 mm, the pin delivers the kind of dimensional stability required for final checks and comparative gauging. The 50 mm shank length provides adequate contact area for stable positioning while remaining compact for confined setups. The quoted accuracy places this instrument firmly in the micro‑measurement domain, making it suitable when fine tolerances determine part acceptance. Workshop‑ready design for everyday handling Built as a workshop version, the pin combines a compact form with handling features that reduce set‑up time on the shop floor. Manufactured from special steel, the component resists wear during repeated insertions and removals, supporting longer service life under normal workshop conditions. The single‑piece delivery format simplifies stockkeeping and traceability; the item is supplied in a protective transport case to prevent damage in transit and to keep the measuring face clean between uses. At 0.15 kg the pin is easy to manoeuvre and store alongside common inspection tools. Integrates into production and inspection workflows The measuring pin is intended as a practical tool for machine shops, tool rooms and quality control stations that require quick, reliable end‑gauging. As a precision end mass for verification tasks, it pairs naturally with handheld measuring instruments such as precision calipers and micrometres for secondary checks. The compact geometry shortens measurement cycles and reduces fixturing complexity, supporting faster throughput without sacrificing repeatability. As part of the Metav IndustryLine offering, the component benefits from centralised supply and consistent product documentation for streamlined procurement. For ordering or technical clarification about the M323.H84 gauge pin, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for tailored advice on integration and delivery. Technical data Article number: M323.H84 GTIN: 4061905449154 Label: Prüfstift, einzeln, 17,84 mm Länge 50 mm Core measurements Nominal diameter: 17.84 mm Length: 50 mm Tolerance / runout: ±0.002 mm Weight: 0.15 kg Materials & features Material: special steel Version: workshop execution Delivery: single gauge pin in protective transport case Category: gauge pins Application: end measurement / bore checking FAQ What measurement accuracy can be expected from this gauge pin? The declared runout tolerance for the M323.H84 gauge pin is ±0.002 mm, which supports tight end‑measurement requirements in precision inspection tasks. Is the pin suitable for fine mechanical or watchmaking applications? With a nominal diameter of 17.84 mm and a compact 50 mm length, the pin falls into the micro measurement class and is appropriate for fine mechanical checks where space and repeatability are critical. What material is used and how does it affect service life? The M323.H84 is made from special steel, a choice that provides workshop‑grade durability under frequent use and helps maintain dimensional stability over repeated cycles. How is the gauge pin supplied and protected during transport? The pin is supplied as a single item and is delivered in a protective transport case to prevent damage and contamination during storage and shipping. Which inspection tools pair well with this gauge pin? The pin is designed for use with precision calipers and micrometres for comparative and secondary measurements; it is ideal where a fixed end mass simplifies set‑up and repeatability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.85mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of high repeatability and compact handling: the precise diameter and tight tolerance ensure reliable seating and end‑measure checks in routine inspection tasks. Benefit from a rugged single‑piece design and short length for low deflection and fast fixture checks. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin, single, 17.85 mm diameter, 50 mm length — Metav IndustryLine A gauge pin, single, 17.85 mm diameter, 50 mm length designed for quick seating verification and end‑measurement control in workshop and production inspection. Workshop version Diameter 17.85 mm Length 50 mm Tolerance ±0.002 mm Consistent precision for repeatable checks This compact inspection pin delivers a tight tolerance of ±0.002 mm, making it suitable for routine dimensional verification where reproducibility matters. The short 50 mm length limits cantilever deflection, so measurements remain stable when used in jigs, fixtures or tactile probes. As a hardened, single‑piece checking implement, the component reduces jack‑and‑gage adjustments and supports faster go/no‑go decisions on production lines. Robust material and compact handling reduce downtime Constructed from special steel, the pin withstands repeated seating cycles while keeping contact surfaces intact. The 17.85 mm diameter and balanced mass (0.15 kg) enable secure placement and straightforward handling on benches and in fixture arrays. The workshop specification emphasises practical wear resistance and easy integration into existing inspection routines, allowing technicians to maintain throughput with minimal setup time. Integrates with inspection workflows to save time Ideal for end‑measure and seating inspections, the pin complements manual gauges and automated checking stations alike. Its single‑unit delivery simplifies inventory for small batches or bespoke checks, while the clear dimensional specification supports traceable procedures. By shortening cycle time per inspection and lowering rework rates, this gauge pin contributes directly to improved process efficiency and dependable quality control. For precise seating checks and reliable end‑measure control, request the Metav IndustryLine gauge pin M323.H85 from Metav Werkzeuge — contact our Emmerich specialists for tailored recommendations and prompt supply Technical Data Article number: M323.H85 GTIN: 4061905449161 Manufacturer: Metav IndustryLine Category: Gauge pins Facts Diameter: 17.85 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Single pin delivery Accuracy class: ±0.002 mm FAQ What is the intended use for this gauge pin? The gauge pin M323.H85 from Metav IndustryLine is intended for seating verification, end‑measure checks and short‑range dimensional control in workshop and production environments. Is the specified tolerance suitable for precision inspection tasks? Yes, the tolerance of ±0.002 mm makes this gauge pin appropriate for repeatable inspection tasks where tight dimensional control is required. Which materials is the pin compatible with in inspection setups? The M323.H85 is a hardened steel checking pin; it is used as a measuring reference against components of various materials when verifying fit and seating, rather than for direct machining. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.86mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Choose the combination of workshop robustness and fine tolerance for reliable end‑measurement tasks; the 17.86 mm diameter, 50 mm long single gauge pin provides ±0.002 mm accuracy for repeatable checks and is delivered ready for safe transport. Order the article directly via Metav Werkzeuge or consult the Metav advisors for tailored selection. M323.H86 — Gauge pin (single), 17.86 mm diameter, 50 mm length, Metav IndustryLine The M323.H86 is a single gauge pin for precise end‑measurement and fit checks, designed for routine workshop metrology and fixture testing. Workshop-grade design for daily use Diameter 17.86 mm for precise fit Length 50 mm for reliable end measurements Tolerance ±0.002 mm for high accuracy Reliable workshop metrology with industrial accuracy A compact, single gauge pin engineered for consistent end‑of‑line checks delivers measurable improvements to throughput and quality control. With a specified tolerance of ±0.002 mm, the pin reduces uncertainty in go/no‑go assessments and alignment tasks, enabling faster decision making on the shop floor. The tight specification supports repeatable results when used as a reference in assembly fixtures or when validating bore diameters, turning a routine inspection into a verifiable quality step. Robust material and dimensions for repeatable handling Constructed from special steel, the pin combines wear resistance with dimensional stability under normal workshop conditions. The 17.86 mm diameter and 50 mm active length give a practical balance between insertion depth and handling convenience, making the item suitable for fixture set‑up, plug checks and end measurement applications. The workshop‑grade finish eases cleaning and prevents local corrosion that could affect gauge performance, so calibration intervals remain predictable. Practical delivery and integration into existing processes Designed for integration into established metrology routines, the pin is supplied in a protective transport case to prevent damage during storage and transit — a practical advantage for mobile inspection kits or multi‑station workshops. Lightweight and compact, it can be combined with fixture plates or handed‑over to quality stations without added handling complexity. Metav’s supply chain ensures prompt availability from Emmerich, supporting continuous production and minimising downtime. Choose the Metav IndustryLine M323.H86 gauge pin for workshop‑grade precision; contact Metav Werkzeuge in Emmerich for consulting on matching gauges to specific inspection tasks Technical data Article number: M323.H86 GTIN: 4061905449178 Brand: Metav IndustryLine Facts Diameter: 17.86 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Delivered in transport case Intended for end‑measurement applications FAQ What tolerance can be expected from this gauge pin? The specified tolerance for the M323.H86 gauge pin is ±0.002 mm, designed to support precise end‑measurement and fit checks. Which material is used for the pin body? The pin is made from special steel, chosen for dimensional stability and wear resistance in workshop environments. Is the gauge pin suitable for end‑measurements and fixture setting? Yes, the single gauge pin is intended for end‑measure tasks and is suitable for fixture set‑up and quick fit verification. Does the product arrive protected for transport? The item is supplied in a transport case to protect the pin during storage and handling. What are the exact dimensions of the pin? The key dimensions are 17.86 mm diameter and 50 mm length, providing a practical insertion depth for common inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.87mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop-grade gauge pin that combines high repeatability with robust handling: a fixed Ø 17.87 mm dimension and a tight tolerance of ±0.002 mm support reliable end‑measure checks and fast in‑process verification. Supplied in a protective case for safe transport, order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.H87 — single test pin, Ø 17.87 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.H87 for precise end‑measurement and dimensional verification in workshop and small‑series production environments. Workshop-grade construction Fixed diameter Ø 17.87 mm Length 50 mm for compact gauging Supplied in protective case Precision that keeps production moving A fixed‑diameter gauge pin offers a straightforward reference for verifying hole sizes and end measurements; the M323.H87 presents a diameter of 17.87 mm combined with a declared accuracy of ±0.002 mm, which reduces uncertainty in assembly checks and quick go/no‑go comparisons. This level of repeatability shortens inspection cycles and decreases stoppages caused by ambiguous fits, making the pin suitable as a fast inspection tool on the shop floor and in quality control stations. The clear nominal dimension and tight tolerance help standardise routine checks, lowering the cognitive load for operators and supporting consistent production throughput. Built for daily workshop use Manufactured in special steel and trimmed to a 50 mm length, the pin balances reach and handling for a wide range of tasks without excess bulk. The workshop version is designed to withstand frequent handling and to fit into modular test fixtures or gauge blocks when rapid checks are required. Supplied in a protective case, the unit is simple to transport between workstations while maintaining its finished surfaces and dimensional integrity. The compact mass (approximately 0.15 kg) and single‑piece design aid quick placement and stable seating during verification, which supports reliable outcomes under typical workshop conditions. Practical integration and traceability for shopfloor verification For traceable identification and inventory, the part is listed as SKU M323.H87 and carries a GTIN for procurement and stock management. As a single, fixed‑size test pin it is ideal for end‑measure comparisons, seating tests and as a reference probe for assembly jigs where a defined stop or fit control is required. The straightforward geometry simplifies training and reduces interpretation errors in fast inspection routines, while the robust material selection supports repeated use as part of a dependable inspection regimen. The compact format also facilitates storage and handling in standard tool trays and quality kits. For workshop gauging needs, request the Metav IndustryLine gauge pin via Metav Werkzeuge; contact our Emmerich team for specification advice at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data SKU: M323.H87 GTIN: 4061905449185 Brand: Metav IndustryLine Category: Gauge pins / Test pins Facts Diameter: 17.87 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop execution Delivery: Supplied in protective case Intended use: End measurement and dimensional verification FAQ What nominal dimension does the pin provide? The pin provides a fixed nominal diameter of 17.87 mm, suitable for direct end‑measure checks and fit verification with minimal interpretation. Is the pin suitable for use in assembly jigs and fixture checks? Yes; the single‑piece design and 50 mm length make the test pin appropriate for seating and reference use in fixtures and jigs for production checks. What tolerance can be expected from this gauge pin? The gauge pin is specified with an accuracy of ±0.002 mm, allowing for tight repeatability in routine inspection tasks. Which material is used for the pin and what does it mean for handling? The pin is made from special steel, designed to provide mechanical stability and reliable contact surfaces for frequent workshop use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.88mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precision, robust workshop design and practical transport packaging for repeatable end measurements; the compact gauge pin combines high tolerance with easy handling. Order the item directly via Metav Werkzeuge or ask our consultants if further specification detail is required. Gauge pin M323.H88 — single gauge pin, Ø 17.88 mm, length 50 mm (Metav IndustryLine) The Gauge pin M323.H88 is a single, workshop-grade test pin in special steel intended for precise end and dimensional checks in inspection jigs and measuring benches. Single gauge pin, Ø 17.88 mm Length 50 mm for compact checks Accuracy ±0.002 mm for reliable results Supplied in protective transport case Consistent diameter checks for production control The compact measuring pin delivers repeatable diameter checks where small tolerances matter. With a nominal diameter of Ø 17.88 mm and a stated positional tolerance of ±0.002 mm, the pin is suited to fine acceptance inspection and go/no‑go verification. Classified as a micro range instrument (measurement range up to 100 mm), it combines the stiffness required for short‑span tests with the resolution necessary for workshop quality control, reducing the need for rework and supporting efficient process decisions. Robust workshop design and handling advantages Designed as a workshop version, the measuring pin uses special steel for wear resistance and dimensional stability during repeated use. At a length of 50 mm and weighing approximately 0.15 kg, the component is easy to seat in fixtures and to manipulate in tight inspection set‑ups. Delivery in a protective transport case safeguards the gauge during storage and movement, ensuring the nominal geometry is preserved between measurements and lowering the risk of accidental damage that would otherwise affect result reliability. Seamless integration into inspection workflows The pin is suitable for end measurements, alignment checks and use as a reference plug in calibration jigs; the compact form factor supports automation feeds and manual benches alike. Identified by SKU M323.H88 and GTIN 4061905449192, the element can be documented in inventory and traceability systems. The combination of tight tolerance and workshop robustness facilitates faster decision making on the shop floor: fewer ambiguous results, clearer pass/fail outcomes and a reduced incidence of scrapped parts. Practical reasons to choose a Metav IndustryLine gauge pin Choosing a workshop-grade measuring pin from Metav IndustryLine aligns precision with availability: the product is intended to be a straightforward, dependable tool for everyday metrology tasks. The design focuses on the essentials—accurate diameter, solid material, compact length and protective packaging—so that inspection personnel can concentrate on measurement quality rather than component handling. This straightforward specification supports clear procurement and efficient asset management across production sites. For specification confirmation, availability from our Emmerich stock and tailored advice on using the M323.H88 in existing inspection setups, contact Metav Werkzeuge for fast professional support and supply arrangements. Technical data Article number: M323.H88 GTIN: 4061905449192 Label: Prüfstift, einzeln, 17,88 mm Länge 50 mm Numbers / Core technical data Diameter: 17.88 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features / Materials Material: Special steel Workshop design (workshop‑grade execution) Suitable for end and dimensional measurements Supplied in protective transport case FAQ What is the nominal diameter of the pin? The nominal diameter is 17.88 mm, specified for precise end and fit measurements with the M323.H88 gauge pin. What tolerance does the gauge pin hold? The instrument is specified with an accuracy of ±0.002 mm, enabling tight inspection limits and reliable go/no‑go checks. Which materials is the pin made from? The measuring pin is manufactured from special steel, chosen for wear resistance and dimensional stability in workshop conditions. Is the pin delivered protected for transport? Yes, the product is supplied in a protective transport case to preserve geometry during handling and storage. What is the SKU and GTIN for ordering and documentation? SKU: M323.H88; GTIN: 4061905449192 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.89mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a compact, workshop‑grade gauging pin that combines high dimensional fidelity and robust construction: the small diameter and tight tolerance ensure repeatable end‑dimension checks, while the supplied protective case keeps the instrument ready for daily use. Order the part directly via Metav Werkzeuge or consult the technical team for batch and fixture advice. Test pin 17.89 mm — workshop gauging pin, 50 mm length (Metav IndustryLine) Test pin 17.89 mm, 50 mm length is a precision‑gauging component for end‑dimension inspection and fixture verification in machining and assembly environments. Workshop design for daily use High accuracy ±0.002 mm Special steel construction Delivered in protective case Consistent dimensional control for production environments The compact pin has been engineered for repeatable measurements where precision is essential. A verified positional accuracy of ±0.002 mm provides a reliable baseline for pass/fail checks and short‑run quality control. This level of tolerance reduces rework by tightening the uncertainty band around critical diameters, enabling production engineers to make faster, data‑driven decisions and maintain process capability. Durable construction that withstands workshop handling Constructed from special steel, the pin balances hardness and corrosion resistance to endure routine contact with workpieces and fixtures. The 50 mm shaft length offers a stable engagement depth that minimises measurement wobble while remaining compact enough for tight fixturing. The robust finish and geometry limit deformation and wear, extending service life and lowering total cost of ownership in demanding shopfloor conditions. Compact form factor for flexible gauging tasks With a measuring diameter of 17.89 mm and a restrained overall profile, the pin is suitable for end‑dimension inspection, locating, and verification within jigs and gauges. The workshop version is intended for everyday industrial use and is delivered in a protective case, simplifying transport between workstations and helping to preserve the measuring surface. The small mass and simple geometry also make integration into manual and semi‑automatic fixtures straightforward. Traceability and integration into quality workflows The component is supplied with clear identification to support inventory control and traceability in quality documentation. The compact design facilitates fixture mounting and routine exchange during maintenance intervals, supporting lean inspection practices and predictable machine downtime. Combined with Metav’s distribution and quality filter in Emmerich, the part contributes to uninterrupted supply and consistent measurement standards on the production floor. For ordering and specific batch or fixture questions, contact Metav Werkzeuge in Emmerich to discuss availability of the Test pin and options for series supply or customised packaging. Technical data Article number: M323.H89 GTIN: 4061905449208 Manufacturer: Metav IndustryLine Measurements Measuring diameter: 17.89 mm Shaft length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Materials & features Material: special steel Design: workshop version Delivery: protective case included Category: gauging pin / test pin FAQ What applications suit this test pin best? The test pin is designed for end‑dimension checks, locating and verification tasks in machining, assembly jigs and inspection fixtures; the 17.89 mm diameter and 50 mm length suit compact components and fixture integration. Is the accuracy of the test pin traceable? The part is supplied with identification and production traceability; the specified accuracy of ±0.002 mm describes the manufacturing tolerance for the gauging surface. Can this pin be used in automated fixtures? Yes, the compact geometry and robust material make the pin suitable for manual and semi‑automatic fixtures; ensure mounting and repeatability criteria are met for fully automated applications. How does the workshop design affect longevity? The workshop version and special steel construction offer improved resistance to wear and handling, prolonging service life under normal production‑floor conditions. What is the SKU for ordering replacement pins? The replacement article is listed as M323.H89 and can be ordered through Metav Werkzeuge for single‑unit or series supply Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.8mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from the combination of ±0.002 mm tolerance, special steel construction and a compact 50 mm length for reliable end‑dimension checks; order directly via Metav Werkzeuge or consult our specialists for application guidance. Gauge Pin, single, 17.8 mm Ø – 50 mm length (Metav IndustryLine) The gauge pin is a workshop‑grade test pin designed for end‑dimension verification and fixture inspection in metrology and assembly workflows. Workshop version, robust construction Diameter 17.8 mm for precise fits 50 mm length for standard gauging Consistent precision for end‑dimension checks The test pin delivers repeatable results thanks to a tolerance of ±0.002 mm, which supports high‑precision fitting and go/no‑go verification in production and inspection routines. This level of accuracy keeps process variation low and reduces rework by providing a verifiable reference for hole and shaft fits. Where interchangeability and tight clearances matter, the controlled geometry and surface finish of the pin ensure reliable contact and measurable outcomes without guesswork. Built for workshop durability and ease of handling Constructed from special steel, the pin resists wear under frequent use and maintains its calibration characteristics over time, which reduces the frequency of replacement and downtime. The 50 mm length provides sufficient engagement for typical gauging tasks while remaining compact for manual handling and fixture insertion. The workshop version combines robustness with a balance of stiffness and manageability, making it suitable for bench checks, jig validation and on‑machine spot inspections. Practical integration and traceability in production The single‑piece design supports straightforward inventorying and assignment to inspection kits; the compact weight and dimensions make the pin convenient for routine tooling. With an assigned GTIN and clear article identification, traceability is maintained through supply and inspection chains. Metav’s distribution approach means the item can be supplied as part of broader inspection assortments, helping to consolidate sourcing and ensure consistent quality across workshop and production environments. For specification matching and supply of the Metav IndustryLine gauge pin, contact Metav Werkzeuge GmbH in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and fast delivery Technical Data Article number: M323.H80 GTIN: 4061905449116 Facts Diameter: 17.8 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Single gauge pin Label: Gauge pin, single, 17.8 mm length 50 mm FAQ What accuracy can be expected from this gauge pin? The gauge pin provides an accuracy of ±0.002 mm, making it suitable for precise end‑dimension verification in workshop and small‑series production environments. Is the pin suitable for fixture and jig checking? Yes, the Metav IndustryLine gauge pin is designed as a workshop version suitable for fixture, jig and assembly checks where repeatable reference dimensions are required. What material is used and how does it affect wear resistance? Made from special steel, the pin offers enhanced wear resistance compared with untreated steels, supporting longer service life under frequent contact checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.91mm Test Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of precise dimensional control, robust special‑steel construction and a compact 50 mm length for reliable end‑measure checks in workshop routines. Order the part directly via Metav Werkzeuge or consult the Metav team for delivery and stock information. Gauge pin, single — 17.91 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin, single (17.91 mm diameter, 50 mm length) designed for fast verification of final dimensions and bore checks in workshop metrology. Precision ground 17.91 mm diameter Tight tolerance ±0.002 mm 50 mm usable length for deep checks Workshop-grade special steel construction Consistent, measurable accuracy for routine checks The precision-ground diameter of 17.91 mm combined with a declared tolerance of ±0.002 mm provides a reliable basis for repeatable pass/fail decisions. Where throughput and traceability matter, the tight tolerance reduces ambiguity during inspection and shortens cycle times by limiting rework. Presented as a single test element, this component suits quick go/no-go verifications and supports consistent inline quality assurance without complex setup. Robust material and handling reduce downtime Manufactured from special steel in a workshop specification, the pin resists common wear mechanisms encountered during repeated insertion and extraction. The hard, finely finished surface preserves dimensional integrity and eases cleaning, which helps maintain measuring certainty between periodic checks. With a compact 50 mm length the item remains easy to handle and store while offering sufficient reach for many typical bore and end‑measure applications. Integration into inspection workflows and tooling Supplied as an individual gauge pin, the item complements bench fixtures, manual gauges and basic checking rigs. The lightweight construction (approx. 0.15 kg) enables rapid changeovers and minimal fixturing influence, so measurement throughput improves without adding system complexity. Marked and traceable identifiers support inventory control and link inspection results to specific hardware when documenting quality records. Practical choice for workshop environments As a workshop‑grade measuring element, the pin balances precision with durability for everyday use. The precision-ground finish and compact form make it suitable for end‑measure checks where space and speed are priorities. Its simple geometry minimises handling errors, supports straightforward visual and tactile inspection and integrates seamlessly into established metrology processes. Choose Metav IndustryLine's M323.H91 for dependable end‑measure verification and contact Metav Werkzeuge for supply and dispatch from Emmerich Technical Data SKU: M323.H91 GTIN: 4061905449222 Brand: Metav IndustryLine Description: Gauge pin, single, 17.91 mm diameter, length 50 mm ECLASS: 21170231 Facts Diameter: 17.91 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.15 kg Category: Messstifte Special features Material: special steel Version: workshop execution Delivery: single item Intended use: end‑measure and bore verification Label: Prüfstift, einzeln, 17,91 mm Länge 50 mm FAQ What inspection tasks is this pin suitable for? This pin is intended for final dimensional checks and bore verification; the 17.91 mm diameter and ±0.002 mm tolerance make it suitable for precise workshop measurements with the Metav IndustryLine gauge pin M323.H91. Is the material suitable for repeated use in a production environment? Yes, the pin is made from special steel and produced in a workshop specification to withstand repeated insertion and extraction common in routine inspection tasks. How is the item identified for traceability? Identification is supported by the SKU M323.H91 and GTIN 4061905449222, which can be recorded alongside inspection results for traceability. Can this pin be used as a reference standard in calibration procedures? The pin is designed for routine verification and bore checks; for formal calibration protocols refer to your internal procedures and the applicable laboratory accreditation requirements. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.92mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of a compact, shop-ready measuring pin with 17.92 mm diameter and an industrial ±0.002 mm tolerance for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application support. Gauge pin M323.H92 — Test pin (17.92 mm Ø, 50 mm length) by Metav IndustryLine A single gauge pin 17.92 mm, length 50 mm designed for end‑measure verification, fixture setup and repeatable inspection tasks in metrology and workshop environments. Workshop-grade construction for daily use Diameter 17.92 mm with ±0.002 mm tolerance 50 mm length for standard fixture compatibility Precision for repeatable end‑dimension checks The compact test pin is engineered to provide consistent reference geometry for end‑measure inspections and go/no‑go checks. With a nominal diameter of 17.92 mm and a stated accuracy of ±0.002 mm, the component offers the kind of dimensional certainty required for critical alignment and inspection tasks. The tight tolerance reduces scatter in measurement series, which improves process control and reduces rework; this is particularly valuable when setting up jigs or verifying bores where even small deviations affect assembly quality. The solid construction ensures the reference surface remains stable under normal shop handling, supporting repeatability across measurement cycles. Robust workshop design that fits production needs Built as a workshop version, the pin combines durability with straightforward handling. The body is made from special steel, delivering wear resistance where frequent insertion and withdrawal are required. At 50 mm overall length the pin matches common fixture depths and bench setups while its modest mass (around 0.15 kg) balances rigidity with ease of positioning. The form factor allows the pin to be used as a fixed reference or as a temporary plug gauge during setup routines. Where interchangeability with existing gauge sets is needed, the nominal diameter and standard length keep integration simple and predictable. Practical integration into inspection and setup workflows Use cases include bore verification, fixture alignment, end‑face checks and calibration aids on inspection benches. The pin supports direct comparison methods and can be paired with calipers or micrometres where a tactile reference is required. Because the item is offered as a single test pin, it is suited to workshops that need a specific nominal size for process checks or for building matched sets incrementally. Metav’s distribution ensures steady availability from Emmerich, and the product’s workshop focus reflects the brand’s aim to make precise metrology tools accessible for everyday industrial use while maintaining supply reliability across the European market. For practical advice or order placement for the Metav IndustryLine gauge pin M323.H92, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss specification fit and delivery options Technical Data Article number: M323.H92 GTIN: 4061905449239 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 17,92 mm Länge 50 mm Facts Nominal diameter: 17.92 mm Accuracy: ±0.002 mm Length: 50 mm Weight: 0.15 kg Special features Material: special steel Version: workshop execution Application: end‑measure verification, fixture setup, bore checks FAQ What tolerance does the gauge pin carry? The gauge pin M323.H92 from Metav IndustryLine is specified with an accuracy of ±0.002 mm, suitable for precise end‑dimension checks. Which material is used for this test pin? This test pin is manufactured from special steel, selected for wear resistance in workshop environments. For which tasks is the pin primarily intended? Typical uses include bore verification, fixture alignment and end‑face checks where a stable reference diameter (17.92 mm) and a 50 mm length are required. Is a calibration certificate supplied with the pin? The product data does not indicate a supplied calibration certificate; if a certificate is required, please request specific calibration options when enquiring about the M323.H92. Can the pin be integrated with existing gauge sets and fixtures? Yes, the nominal diameter and standard 50 mm length allow straightforward integration into common fixtures and inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.93mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high dimensional accuracy and robust special‑steel construction for reliable, repeatable inspection results; order the test pin directly via Metav Werkzeuge or consult the Metav team for application advice. Test pin, single — Gauge pin Ø 17.93 mm, length 50 mm (Metav IndustryLine) A Test pin, single, 17.93 mm, length 50 mm designed for precise end‑gauge and fit checks in workshop inspection and fixture setup. Workshop version, precision ground Diameter 17.93 mm for end‑gage use Length 50 mm with ±0.002 mm tolerance Made from special steel for durability Repeatable accuracy for inspection and fit control The gauge pin is produced to a tight tolerance of ±0.002 mm, providing a reliable reference for end‑gauge checks, plug tests and locating pins in fixtures. This level of precision minimises measurement uncertainty and supports quality control routines where repeatability is essential. By reducing variation at the interface between pin and bore, the component acceptance decision becomes more consistent, shortening inspection time and lowering scrap rates. The use of a clearly defined tolerance range also simplifies documentation and traceability in inspection records. Durable construction suited to workshop environments Manufactured from special steel and supplied in a workshop version, the pin balances surface hardness and toughness to withstand repeated seating and withdrawal from mating bores. The 50 mm overall length gives sufficient engagement for stable seating while keeping handling straightforward; a mass of 0.15 kg indicates a compact, easy‑to‑manipulate part. The ground finish improves wear resistance and contact repeatability, helping to maintain dimensional integrity over many cycles and reducing the need for frequent replacement. Practical integration into quality workflows The solid, single‑piece design permits immediate use in go/no‑go gauges, fixture locating points and portable inspection kits. Marking and the supplied identifiers allow straightforward inventory control and process documentation; the item is listed under SKU M323.H93 and GTIN 4061905449796 for procurement and traceability. Where measurement uncertainty budgets are tight, using this pin as a stable mechanical reference helps to reduce reliance on more complex instruments for simple pass/fail checks, increasing throughput without compromising on control. Choose Metav IndustryLine inspection pins via Metav Werkzeuge for dependable workshop performance and straightforward procurement — contact info@metav-werkzeuge.com or call +49 2822 7131930 for ordering or technical clarification Technical data Article number: M323.H93 GTIN: 4061905449796 Facts Diameter: 17.93 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop version Category: Gauge pin (Messstifte) FAQ What is the nominal diameter of this gauge pin? The nominal diameter is 17.93 mm as supplied in the Test pin, single, 17.93 mm, length 50 mm (SKU M323.H93). What tolerance can be expected during use? The inspection pin is manufactured to a tolerance of ±0.002 mm, ensuring repeatable fit checks and consistent go/no‑go evaluations. Which material is used for the pin? The pin is made from special steel, selected for a balance of wear resistance and toughness suitable for workshop inspection tasks. Can this pin be used for fixture locating and end‑gage tests? Yes, the solid single‑piece design is intended for end‑gage use, fixture locating and plug testing in production and inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.94mm Gauge Pin, Single, 50mm Length, Workshop Finish - Metav IndustryLine
Take advantage of precise end‑dimension control and robust workshop construction: the combination of a 17.94 mm working diameter, a 50 mm shaft length and a tight ±0.002 mm tolerance supports repeatable go/no‑go and reference checks in routine inspection tasks. Order the gauge pin directly via Metav Werkzeuge or contact the consultants for compatibility advice. Gauge pin M323.H94 — single test pin, 17.94 mm Ø, 50 mm length (Metav IndustryLine) A gauge pin M323.H94 for precise end‑dimension inspection and routine workshop verification, suitable for fixture checks and assembly control. Workshop execution for everyday use Precise diameter: 17.94 mm Solid 50 mm shaft for stable probing High repeatability with ±0.002 mm Improve inspection reliability with a compact reference element The gauge pin is designed as a compact, stable reference for dimensional checks, offering a 17.94 mm nominal diameter combined with a 50 mm shaft that keeps handling straightforward while preserving stiffness. The declared tolerance of ±0.002 mm ensures that measurements used for go/no‑go decisions or assembly verification remain consistent, reducing rework and stoppages. As a simple, single‑piece test element, it fits into pneumatic or manual fixtures as well as bench inspection routines, providing a low‑complexity means of increasing throughput without modifying existing measurement equipment. Material choice and durability that suits daily workshop demands Made from special steel, this test pin resists wear from repeated contact and maintains dimensional stability under normal workshop conditions. The workshop execution emphasises robustness, so the component stands up to regular use in production and quality control areas. The material and finish together contribute to long service life and minimise the need for frequent replacement, delivering a cost‑effective inspection solution over many production cycles. Where traceable calibration is required, Metav can advise on suitable procedures to integrate the pin into existing quality systems. Practical handling, integration and typical applications The single test pin is straightforward to handle and to integrate into jigs, plug gauges and gauge blocks. Typical applications include end‑dimension verification, fixture setup, repeatability checks and final inspection of shafts or bores where a precise reference diameter is needed. The modest weight of the element supports simple manual handling while its geometry allows secure seating in clamps or holders. For production environments seeking reliable, repeatable results with minimal setup time, this test pin provides a pragmatic balance of precision and ruggedness. Contact Metav Werkzeuge today to discuss the suitability of the Metav IndustryLine gauge pin M323.H94 for specific inspection tasks, request calibration options or obtain a tailored supply proposal; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.H94 GTIN: 4061905449802 Manufacturer: Metav IndustryLine Dimensions & precision Diameter: 17.94 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop execution Application: end‑dimension inspection and fixture checks Single test pin, individual delivery FAQ What inspection tasks is this gauge pin suitable for? The gauge pin M323.H94 from Metav IndustryLine is intended for end‑dimension verification, fixture setup and repeatability checks where a precise reference diameter of 17.94 mm is required. Is the tolerance of ±0.002 mm sufficient for production control? Yes, the ±0.002 mm tolerance offers tight repeatability for many workshop and production control applications and supports reliable go/no‑go decisions when used as a reference element. Which material was used and how does it affect wear resistance? The test pin is manufactured from special steel, chosen for its durability under repeated contact; this material helps minimise wear and maintain dimensional stability in routine inspection use. Can the pin be integrated into jigs and fixtures? Integration into jigs, plug gauges and fixture mounts is straightforward; the 50 mm shaft provides adequate engagement for stable seating in manual and mechanical holders. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.95mm Test Probe 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Taking advantage of precise tolerances and a compact length, this gauge pin delivers repeatable end-measurements with minimal setup effort; its special steel construction and protective case ensure workshop-ready durability. Order via Metav Werkzeuge for reliable supply or consult our advisors for application guidance. Gauge Pin M323.H95 – Single 17.95 mm Ø, 50 mm Length (Metav IndustryLine) The gauge pin M323.H95 is a single, hardened pin for precision end-measurements and alignment tasks in micro-range workshop applications. Single gauge pin Ø 17.95 mm Length 50 mm for compact setups Special steel, workshop version Delivered in protective case Consistent accuracy for end-measurements A compact measuring element designed for repeatable results: the 17.95 mm diameter and 50 mm length provide a stable contact area for end-face and alignment checks. With an indicated positional tolerance of ±0.002 mm, the component supports fine adjustment tasks and verification operations where small deviations matter. The precise geometry reduces setup iterations and contributes to faster throughput in inspection sequences, making the tool an efficient choice for short-run quality controls and fixture set-up routines. Robust construction for everyday workshop use Manufactured in special steel and supplied in a protective case, this workshop-oriented pin resists the handling typical in production environments while remaining easy to store and transport. The solid material selection balances surface hardness with dimensional stability so that frequent insertion and removal do not compromise the reference diameter. The compact format suits confined jigs and measuring fixtures, providing a durable reference that preserves calibration intervals and lowers the risk of measurement-related rework. Practical handling and integration benefits The simple, single-pin design enables quick exchange in fixture plates or verification benches, reducing machine downtime during changeovers. As a dedicated end-measurement tool, it is particularly useful for verifying bore seats, setting gauges and transferring reference dimensions between components. The compact dimensions mean the pin is easy to position by hand or clamp, and the supplied protective case ensures safe storage between uses, preserving the critical surface quality required for repeatable measurement results. Contact Metav Werkzeuge today for availability, technical matching and delivery options for the M323.H95 gauge pin; our specialists in Emmerich are available to advise on workshop integration and stock supply Technical data SKU: M323.H95 GTIN: 4061905069826 Article type: Gauge pin Core measurements Diameter: 17.95 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Protective case for transport and storage ECLASS: 21170231 FAQ What accuracy can be expected from this gauge pin? The gauge pin M323.H95 is specified with a tolerance of ±0.002 mm, providing the dimensional stability required for fine end-measurements and alignment checks. Is the pin suitable for fitting into small fixtures and jigs? Yes, the 17.95 mm diameter and 50 mm length make the M323.H95 well suited to compact fixtures and confined measuring setups in workshops. How is the M323.H95 supplied for transport and storage? The gauge pin is supplied in a protective case to safeguard the measuring surface during transport and storage. Which material is used for this measuring pin? This measuring pin is made from special steel, chosen to combine surface durability with dimensional reliability for workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.96mm Test Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Benefit from exact dimensional control and robust workshop design: the pin’s 17.96 mm nominal diameter combined with a ±0.002 mm tolerance ensures repeatable fit checks and profile verification, while the 50 mm length reaches into deeper bores. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.H96, single 17.96 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin M323.H96 designed for precise fit checks, end‑measure verification and fixture set‑up in metrology and workshop quality control, supplied as an individual test pin for one‑piece checks. Diameter 17.96 mm with ±0.002 mm accuracy 50 mm overall length for internal checks Made from special steel Supplied individually, single‑piece delivery Reliable sizing for precise fit and inspection The central benefit of this test pin is its dimensional precision: a nominal diameter of 17.96 mm held to ±0.002 mm provides a measurable reference that reduces uncertainty in go/no‑go and alignment operations. For production environments where bore tolerances and thread fits must be verified quickly, this compact control element enables a straightforward, quantitative decision: either the fit conforms or adjustment is required. The specified tolerance corresponds to a two‑micrometre window, which is sufficient for many precision engineering tasks and small‑batch quality checks. Robust workshop design that endures routine handling Manufactured in a workshop configuration, the pin is made from special steel and finished to maintain consistent geometry during repeated use. The 50 mm length offers access into moderately deep bores and fixtures while remaining easy to handle with one hand or small tools. This construction balances durability with practicality: the compact form resists deformation under typical bench conditions and simplifies storage and identification in a busy measuring kit. The design therefore supports frequent inspection cycles without compromising repeatability. Integrates simply into measurement and setup workflows As an individual gauge pin, the component integrates into go/no‑go sets, alignment jigs and calibration routines as a defined reference. The single‑piece supply reduces packaging waste and simplifies ordering for specific sizes needed for jigs, mandrels or plug‑gauge pairing. Traceable identifiers such as the SKU and GTIN allow clear stock management and cataloguing in quality systems, facilitating inventory control and audit trails. For bespoke applications or questions about interchangeability with existing gauges, the Metav team can provide technical guidance and compatibility checks. For tailored procurement or technical consultation regarding the Metav IndustryLine gauge pin M323.H96 — including suitability for specific fixtures and inspection tasks — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data SKU: M323.H96 GTIN: 4061905070099 Brand: Metav IndustryLine Core measurements Diameter: 17.96 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop execution Single‑piece supply Category: gauge pin FAQ What are the exact dimensions of this gauge pin? The gauge pin M323.H96 has a nominal diameter of 17.96 mm and an overall length of 50 mm. What tolerance does the pin maintain? The pin is specified with an accuracy of ±0.002 mm, suitable for fine workshop fit checks and many inspection tasks. Which material is used for the pin? This Metav IndustryLine test pin is machined from special steel and finished for dimensional stability in routine use. Can this pin be used for checking bore fits and fixture alignment? Yes, the M323.H96 is intended for fit verification, alignment and end‑measure checks in workshop and metrology applications. How is the product identified for ordering and inventory? Order and catalogue the part using SKU M323.H96 or GTIN 4061905070099; both identifiers streamline procurement and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.97 mm Gauge Pin 50 mm Length Workshop Finish - Metav IndustryLine
Combining high dimensional accuracy (±0.002 mm) with a robust workshop design provides consistent fit checks and reduced rework; order the gauge pin directly via Metav Werkzeuge or consult our metrology specialists for application support. Gauge Pin M323.H97 — Single test pin, Ø 17.97 mm, length 50 mm (Metav IndustryLine) The Gauge Pin M323.H97 is a single test pin designed for precise fit and gauge checks in workshop metrology and quality-control routines. High accuracy ±0.002 mm tolerance Diameter Ø 17.97 mm for tight fits Length 50 mm for standard assembly checks Workshop version for everyday robustness Accurate fits for repeatable measurements The single test pin delivers high dimensional accuracy with a stated tolerance of ±0.002 mm, making it suitable for precision fit checks and final inspection tasks. This tight tolerance reduces uncertainty when assessing bores, dowel holes or mating parts, so measurement decisions can be made faster and with greater confidence. The controlled diameter and short, rigid geometry minimise bending and runout during manual handling, which helps to maintain repeatability across multiple checks. Robust construction for workshop workflows Manufactured from special steel and offered in a workshop version, the pin is designed for repeated use in a production environment. The 50 mm length gives sufficient engagement for common bushings and housings while remaining easy to handle on the shop floor. The material choice balances surface wear resistance with dimensional stability, so the component resists deformation under normal inspection loads and keeps its calibrated condition for longer intervals between verifications. Practical benefits for quality control and process reliability Using a purpose-made test pin simplifies go/no-go assessments and reduces the need for elaborate fixtures. The compact design is straightforward to integrate into existing inspection benches and enables quick visual and tactile checks alongside gauge blocks or plug gauges. Supplied as a single item with clear product identification (SKU M323.H97, GTIN 4061905070105), the pin supports traceable workflows and efficient stock management in maintenance or production settings. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine gauge pin into existing quality processes or to request a quotation for specific batch quantities Technical Data Article number: M323.H97 GTIN: 4061905070105 Manufacturer: Metav IndustryLine Facts Length: 50 mm Diameter: 17.97 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Material: special steel Single test pin Accurate, short rigid geometry FAQ What inspection tasks is this test pin suitable for? The gauge pin M323.H97 from Metav IndustryLine is intended for precision fit checks, bore verification and assembly conformity tests where a diameter of 17.97 mm and a length of 50 mm are required. How precise is the diameter of the pin? The diameter is specified to a tolerance of ±0.002 mm, which makes the pin appropriate for high-precision workshop inspections and repeatable go/no-go assessments. Is the pin delivered individually or in sets? This item is supplied as a single test pin, referenced under SKU M323.H97, suitable for stocking as a spare or for targeted inspection tasks. What material is used and how does it affect wear? The pin is made from special steel, chosen to provide a balance of wear resistance and dimensional stability under normal inspection loads. Can the pin be used for calibration reference in a small workshop? Yes, the gauge pin M323.H97 is designed for workshop metrology and supports reliable practical checks; for formal calibration procedures, please consult Metav Werkzeuge for recommended verification intervals. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.98mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Reliable workshop-grade gauge pin combining 17.98 mm nominal diameter, a manufacturing tolerance of ±0.002 mm and a 50 mm working length for consistent end‑measurements; order directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin, single, 17.98 mm, 50 mm — Metav IndustryLine workshop version The gauge pin, single, 17.98 mm, 50 mm is a hardened reference plug for precise fit checks and end‑measurements in workshop inspection and production control. Workshop version, robust for daily use Diameter 17.98 mm with ±0.002 mm fit 50 mm hardened special-steel body Precise end-measurement for fit checks Precision where it matters for fit and clearance testing The gauge pin is manufactured to a tight ±0.002 mm dimensional tolerance, making it suitable for repeatable fit checks and final size verification in production and inspection routines. A nominal diameter of 17.98 mm gives a reliable reference for checking bores, gauges and mating parts; the indicated tolerance corresponds to typical gauge‑level manufacturing control and supports objective pass/fail judgements. Classified within the micro range (10–100 mm), this size offers the best balance of stiffness and accessibility for small to medium components, reducing flex and improving reproducibility compared with longer measuring plugs. Robust construction for frequent workshop handling Machined from special steel and finished for durability, the pin’s 50 mm overall length provides sufficient engagement without becoming unwieldy in handheld checks or fixture use. The workshop specification ensures surface and dimensional stability under regular use, while the mass and profile support secure seating in measuring fixtures or manual checking. By limiting operator variability through consistent geometry and material hardness, the pin helps reduce measurement scatter and downstream rework — a practical advantage in serial production and quality control stations. Fits into established inspection workflows and traceable routines Designed as a simple, reliable reference element, the pin integrates into go/no‑go checks, bore matching and end‑measurement protocols commonly found in manufacturing QA. Its repeatable geometry supports documented inspection steps and helps shorten decision cycles on assembly lines. For users requiring support, Metav provides technical advice and accessory suggestions to align the pin with existing gaging sets and test benches, ensuring the tool contributes to measurable improvements in throughput and fewer ambiguous measurements. For workshop-grade precision from the Metav IndustryLine range, order this gauge pin via Metav Werkzeuge or contact our specialists in Emmerich for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.H98 GTIN: 4061905070990 Label: Prüfstift, einzeln, 17,98 mm Länge 50 mm Facts Nominal diameter: 17.98 mm Length: 50 mm Weight: 0.15 kg Manufacturing tolerance: ±0.002 mm eClass: 21170231 Special features Material: Special steel Version: Workshop specification Category: Gauge pins / Messstifte Storytrigger: end masses FAQ What is the intended use of this gauge pin? The gauge pin (Metav IndustryLine gauge pin, single, SKU M323.H98) is intended for fit checks, bore verification and end‑measurements in workshop and inspection environments. Does the pin offer laboratory calibration on delivery? The Metav IndustryLine gauge pin is supplied as a precision workshop item; any laboratory calibration or certification options can be arranged through Metav Werkzeuge on request. Which materials is the pin suitable for contacting during inspection? The pin is manufactured from special steel and is suitable as a non‑cutting reference contact for common engineering materials during inspection and assembly checks. How does the ±0.002 mm tolerance affect inspection decisions? A tolerance of ±0.002 mm defines the manufacturing variation of the pin; this small tolerance supports consistent go/no‑go decisions where tight fits and small clearances are required. Can the pin be used in fixture or jig applications? Yes — the 50 mm length and workshop specification make the pin suitable for use in fixtures and manual jigs for repeated dimensional checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com