Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
17.5 mm Gauge Pin, Single, 50 mm Length, Workshop Version - Metav IndustryLine
Benefit from the combination of workshop‑grade construction, special steel durability and a manufacturing tolerance of ±0.002 mm for consistent end‑dimension checks; order the test pin directly via Metav Werkzeuge or consult our advisors for application guidance. M323.H50 test pin — Workshop gauge pin, Ø 17.5 mm, 50 mm length (Metav IndustryLine) The M323.H50 test pin is a workshop‑grade gauge pin designed for reliable end‑dimension verification and alignment tasks in metalworking environments. Workshop‑grade construction Diameter Ø 17.5 mm Manufacturing tolerance ±0.002 mm Delivered in protective case Repeatable measurements for end‑dimension control A stable gauge must provide predictable results under repeated use; this test pin delivers by virtue of a tight ±0.002 mm manufacturing tolerance, which reduces measurement scatter during comparative checks and fixture verification. The short, rigid geometry supports repeatability for end‑dimension inspections and alignment tasks, making it suitable where consistent reference diameters are required. For quality control routines, the pin’s specification helps maintain process capability and reduces rework stemming from gauging variability. Robust workshop design and material benefits Constructed from special steel, the pin is engineered for daily workshop handling and the mechanical stresses of insertion and removal from bores and fixtures. The 50 mm length and compact mass (0.15 kg) balance accessibility with stability: long enough to engage clearances and short enough to resist bending under normal use. The workshop‑grade finish eases cleaning and routine care, while the included protective case ensures safe transport and storage between measurement cycles, preserving the reference geometry. Practical handling and typical applications Classified within the micro range for gauge pins (10–100 mm), this product addresses fine to medium‑sized gauging needs such as end‑dimension checks, plug verification and positioning aids in jigs and fixtures. The single‑unit supply simplifies inventory for specific diameters and supports retrofit or replacement in existing test setups. Lightweight handling and clear dimensional marking speed up cyclical checks on production lines, while the inherent design reduces operator handling time and contributes to efficient measurement workflows. Contact Metav Werkzeuge for tailored advice on integrating the M323.H50 test pin into existing gauging systems or to request a quotation from our Emmerich‑based team. Technical data Article number: M323.H50 GTIN: 4061905070655 Material: Special steel Length: 50 mm Diameter: 17.5 mm Weight: 0.15 kg Numbers / Core technical data Tolerance: ±0.002 mm Length: 50 mm Diameter: 17.5 mm Weight: 0.15 kg Special features Workshop version Delivered in protective case Single unit delivery Category: Gauge pin (Messstifte) Intended for end‑dimension checks FAQ What is the primary use of this gauge pin? The M323.H50 test pin from Metav IndustryLine is intended for end‑dimension checks, plug verification and alignment tasks in jigs and fixtures where a defined reference diameter is required. What accuracy does the pin offer? Manufactured to a tolerance of ±0.002 mm, the M323.H50 provides tight dimensional consistency for repeatable comparative measurements and fixture checks. What material is the pin made from and is it durable? The M323.H50 is made from special steel and finished for workshop use, giving it robustness suited to frequent insertion and removal in typical metalworking environments. Is the pin supplied with protective packaging? Yes, the M323.H50 is supplied as a single unit and delivered in a protective case to safeguard the reference surface during transport and storage. Which applications suit this diameter and length? A diameter of 17.5 mm and a length of 50 mm make the M323.H50 appropriate for medium‑sized bore checks, alignment aids and fixture reference points within standard workshop and production settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.51mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
A compact workshop-grade gauge pin with a 17.51 mm nominal diameter and ±0.002 mm tolerance delivers reproducible end measurements; combine the robustness of special steel with a compact 50 mm length for efficient inspection workflows. Order the gauge pin directly via Metav Werkzeuge or ask the consultants for further configuration. Gauge pin, single — 17.51 mm nominal diameter, 50 mm length (Metav IndustryLine) A single gauge pin designed for precise end‑dimension checks in workshop and inspection environments, supplied in a workshop execution for routine measuring tasks. Workshop execution for regular use Nominal diameter 17.51 mm 50 mm overall length Tolerance ±0.002 mm Precision where small tolerances make a measurable difference The gauge pin is manufactured to a ±0.002 mm tolerance, which translates into consistently tight dimensional control during inspection and assembly. For routine end‑dimension verification this level of precision reduces uncertainty in pass/fail decisions and shortens verification cycles. Presented in the micro range (nominal diameter 17.51 mm), the pin is particularly suited to fine mechanical tasks where small deviations would otherwise affect fit or function. Built to withstand workshop handling while remaining compact Constructed from special steel, the pin balances surface integrity with dimensional stability required during repeated use. The 50 mm overall length gives a secure gripping allowance without adding unnecessary overhang, which helps maintain repeatability in handheld or fixture-mounted checks. As a workshop version, the design accepts routine handling and integration into inspection benches while offering a compact reference element for small components. Integrates simply into inspection processes and jigs As an individual gauge pin, this item functions as a fixed reference for end‑measurements and can be combined with pin blocks or locating fixtures to accelerate throughput. The defined end dimension and tight tolerance improve traceability in batch checks and reduce downstream rework by catching deviations early. Using a standard nominal size such as 17.51 mm helps maintain compatibility with existing gauge sets and inspection jigs. Reliability supported by an experienced precision partner Sourcing this gauge pin from Metav IndustryLine links the component to a supplier network that emphasises consistent supply and workshop usability. Metav’s position as a precision partner means routine items are selected to deliver practical benefits on the shop floor: dependable reference values, straightforward handling and the assurance of a recognised distribution and logistics setup. Contact Metav Werkzeuge for a specification check or to discuss how this Metav IndustryLine gauge pin can be incorporated into existing inspection routines — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M323.H51 GTIN: 4061905070662 Brand: Metav IndustryLine Numbers Diameter: 17.51 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop execution Application: End measurement ECLASS: 21170231 FAQ What is the nominal diameter of this gauge pin? The gauge pin has a nominal diameter of 17.51 mm; the Metav IndustryLine single gauge pin (SKU M323.H51) is made for precise diameter reference. Which tolerance class does the pin meet? The pin is manufactured to a tolerance of ±0.002 mm, making it suitable for tight end‑dimension verification in workshop inspection routines. What material is used for the pin? This Metav IndustryLine gauge pin is produced from special steel, chosen for its dimensional stability under normal workshop conditions. Is the pin suitable for fine mechanical and small‑part inspection? Yes; with its nominal diameter and compact length, the pin is aimed at micro range applications and fine mechanical inspection tasks. Can this single gauge pin be combined with other pins or fixtures? The pin is intended as a standalone reference element that can be integrated into pin blocks and inspection jigs for routine measurement setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.52mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of a precise combination of high dimensional accuracy and workshop-ready robustness for reliable end-size verification. The compact form and tight tolerance support consistent assembly checks and fixture alignment; order the gauge pin directly via Metav Werkzeuge or consult the specialists if additional data is required. Gauge pin M323.H52 — Single gauge pin Ø 17.52 mm, 50 mm length (Metav IndustryLine) The Gauge pin Ø 17.52 mm, length 50 mm is a workshop-grade precision pin for end‑size checks, fixture alignment and repeatable gauging tasks. Workshop version for robust use Diameter Ø 17.52 mm Tolerance ±0.002 mm Supplied in transport case Reliable end-size verification for consistent production The M323.H52 is engineered for end‑size measurements where reproducibility is essential: a nominal diameter of 17.52 mm combined with a declared tolerance of ±0.002 mm gives a clear quantitative basis for pass/fail decisions on bores and fit checks. In practical terms, the specified tolerance corresponds to micrometre‑level control that keeps mounting features within assembly limits; this removes guesswork during in‑process inspection and reduces rework. The compact geometry and defined contact diameter are ideal for establishing reference points in jigs and gauges, while the clear numerical specification allows direct comparison with inspection protocols. Built for workshop durability and straightforward handling Constructed from special steel and offered in a workshop execution, the test pin balances hardness and toughness so it withstands routine handling and contact with machined surfaces. The 50 mm length provides a stable gripping area without excessive overhang, and the item’s modest weight (0.15 kg) ensures easy manipulation during setup. Delivery in a transport case protects the critical measuring face in transit and storage, keeping the gauge pin ready for immediate use. The robust design reduces the need for frequent replacement and supports a reliable shop‑floor workflow. Practical integration into measuring routines and fixture set‑up As a single, precisely defined gauge element, this test pin simplifies common metrology tasks: checking bore diameters, aligning fixtures, verifying plug fits and setting reference limits for comparative measurements. The clear numeric data and hardened contact face make it straightforward to include this element in quality documentation or to use it as a master pin for go/no‑go comparisons. Its compact format is particularly suitable where space is limited but dimensional certainty is required, supporting both production control and maintenance routines with minimal setup time. For workshop‑grade precision and uncomplicated procurement of the Metav IndustryLine M323.H52, request the gauge pin from Metav Werkzeuge — procurement and technical advice available from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.H52 GTIN: 4061905070679 Designation: Gauge pin, single, Ø 17.52 mm, length 50 mm Brand: Metav IndustryLine Weight: 0.15 kg Data Diameter: 17.52 mm Length: 50 mm Tolerance: ±0.002 mm Measuring range (min/max): 17.52 mm / 17.52 mm Special features Workshop execution Supplied in transport case for transport and protection Single piece delivery Intended for end‑size checks and fixture alignment Robust special steel construction FAQ What level of dimensional accuracy does this gauge pin provide? The declared tolerance for the M323.H52 gauge pin is ±0.002 mm, which supports micrometre‑level decisions in routine shop inspection and ensures consistent end‑size evaluation. Is the delivery specified as calibrated to an accredited standard? The product data does not indicate delivery with an accredited calibration certificate; calibration status is not specified for this item. What is the gauge pin made from and how durable is it? The M323.H52 is manufactured from special steel and presented in a workshop version designed to withstand regular contact with machined surfaces and handling typical for production environments. Which applications suit this gauge pin best? This gauge pin is intended for end‑size checks, fixture alignment, plug‑fit verification and use as a master reference in production and maintenance settings Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.53mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of exact dimensional control, workshop‑proven durability and simple handling to streamline fixture checks and end‑measure tasks; order the part directly via Metav Werkzeuge or consult our technical advisers for integration guidance. Gauge pin, single, Ø 17.53 mm, length 50 mm (M323.H53) — Metav IndustryLine The gauge pin, single, Ø 17.53 mm, length 50 mm serves as a stable reference diameter for end‑measure verification and fixture set‑up in production and inspection environments. Workshop execution for industrial environments Exact diameter 17.53 mm for precision fits Tight tolerance ±0.002 mm for reliable reference 50 mm working length suitable for fixture checks Precision that supports repeatable inspection results The reference dowel delivers a consistent reference diameter that reduces measurement uncertainty during go/no‑go verification and alignment checks. With a stated tolerance of ±0.002 mm, the part provides a verifiable limit for pass/fail assessments and helps to standardise dimensional checks across batches. The carefully controlled diameter ensures repeatability when used as a master pin for plug gauges or as a setting standard in mechanical fixtures, which in turn reduces rework and rejects in serial production. Durable design for intensive workshop use Engineered in a workshop execution, the dowel is manufactured from special steel selected for robust handling and repeated engagement in jigs and gauges. At a nominal length of 50 mm and a compact mass, the component is easy to seat and remove from fixtures while retaining the stiffness required for accurate contact measurement. The construction is aimed at operators and inspectors who demand a reliable reference that tolerates daily use without compromising dimensional integrity. Practical applications and integration benefits This reference pin excels in end‑measure verification, fixture set‑up, and alignment of mating parts where a precise nominal diameter is required. The geometry makes the component suitable for use as a locating dowel in assembly fixtures or as a setting master for plug‑type gauges and alignment tools. By providing a stable reference, the part helps to accelerate set‑up times and improves interchangeability between components and stations, supporting consistent production throughput. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine gauge pin M323.H53 can be integrated into existing inspection routines or production fixtures Technical data Article number: M323.H53 GTIN: 4061905070686 Category: Messstifte Facts Diameter: 17.53 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop execution Single piece reference pin Intended for end‑measure and fixture checks FAQ What tolerance does the gauge pin offer? The gauge pin is specified with a tolerance of ±0.002 mm, providing a tight reference limit for go/no‑go checks and comparative measurements with master gauges; this applies to the Metav IndustryLine gauge pin M323.H53. Which material is the pin made from? The component is manufactured from special steel, chosen for durability in workshop and inspection applications and intended for repeated seating in fixtures. What are the typical applications for this reference pin? Common uses include end‑measure verification, fixture set‑up, alignment tasks and use as a master for plug gauges in production and quality control processes. Is a calibration certificate supplied with the part? Product data does not indicate a supplied calibration certificate; for traceable calibration options or certificates, refer to Metav Werkzeuge’s calibration services. What are the core dimensions and identifier for ordering? Core dimensions are Ø 17.53 mm and length 50 mm; ordering reference is M323.H53 (GTIN 4061905070686). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.54mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
High-precision workshop gauge pin made from special steel with a tolerance of ±0.002 mm and a nominal diameter of 17.54 mm, supplied ready for safe transport in a protective case; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed Gauge pin M323.H54 — Workshop test pin, Ø 17.54 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.H54 is a workshop-grade test pin intended for accurate end measurements and fit checks; its compact dimensions and tight tolerance make it suitable for routine inspection tasks in a production or maintenance environment Workshop-grade precision component Nominal diameter 17.54 mm, length 50 mm Tolerance ±0.002 mm for repeatable fits Precision where it matters: reliable end-measurement results A solid gauge pin with a nominal diameter of 17.54 mm and a length of 50 mm provides a consistently reproducible reference for final-size checks and assembly verifications. The specified tolerance of ±0.002 mm ensures that plug or hole fits can be assessed with confidence, reducing reject rates and rework. In industrial metrology contexts this kind of test pin is classified in the Micro range (10–100 mm), which combines compact handling with the stiffness needed for repeatable contact measurements. The inert surface of the special steel minimises wear over many cycles, prolonging the service life and maintaining dimensional stability during routine use. Built for the workshop: protection and handling advantages Designed as a workshop execution component, the test pin arrives in a protective transport case to prevent damage during storage and transit. This organised packaging supports safe handling on the shop floor and keeps the reference surface free from nicks that would compromise accuracy. At 0.15 kg mass the component is easy to position by hand or fit into inspection fixtures, while the nominal geometry allows straightforward insertion into gauges, sockets or mating parts. Robust material selection and workshop-focused finishing combine to offer a maintenance-friendly tool that withstands frequent use without complex care procedures. Practical integration: applications and efficiency gains This style of test pin is commonly used for end measurements, assembly checks and go/no‑go verifications where a precise cylindrical reference is required. Using a dedicated gauge pin reduces measurement time compared with time‑consuming alternative methods and supports a smoother production flow by delivering fast pass/fail decisions. Traceable identification (SKU M323.H54, GTIN 4061905071416) simplifies inventory management and quality documentation. For workshops seeking to standardise inspection steps, the pin’s repeatability and fit stability enable tighter process control and clearer acceptance criteria for incoming or outgoing parts. Contact Metav Werkzeuge today for delivery details on the M323.H54 workshop gauge pin and individual advice on integrating it into existing inspection routines Technical data Article number: M323.H54 GTIN: 4061905071416 SKU: M323.H54 Dimensions & tolerances Nominal diameter: 17.54 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Design & features Material: special steel Workshop execution Supplied in protective transport case Category: gauge pin Typical use: end measurements / fit verification FAQ What is the nominal diameter and length of this gauge pin? The gauge pin has a nominal diameter of 17.54 mm and a length of 50 mm, suitable for routine end-measurement tasks. What accuracy can be expected from the M323.H54 gauge pin? The M323.H54 is specified with a tolerance of ±0.002 mm, delivering repeatable fit checks for production and inspection applications. Is the test pin delivered ready for use and protected during transport? Yes; the test pin is supplied in a protective transport case appropriate for workshop handling, keeping the reference surface safe until use. Which applications are typical for this type of gauge pin? Typical uses include end measurements, assembly fit verification and go/no‑go checks where a precise cylindrical reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.55mm Precision Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Compact accuracy and dependable shop use combine in this workshop‑grade gauge pin: 17.55 mm nominal diameter, 50 mm overall length and a narrow ±0.002 mm tolerance make it suitable for repeatable end‑measurements and go/no‑go checks. Supplied in a protective transport case, the component supports efficient inspection routines; order via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.H55 – single test pin, Ø 17.55 mm, length 50 mm (Metav IndustryLine) Gauge pin M323.H55 is a workshop‑grade single test pin in special steel, designed for precise end‑measurement and bore checking in metalworking and assembly tasks. Workshop version for daily shop use Precision diameter 17.55 mm ±0.002 mm Length 50 mm, made from special steel Repeatable inspection with micrometre-level tolerance The pin is manufactured to a nominal diameter of 17.55 mm with a verified tolerance of ±0.002 mm, offering performance that supports tight inspection criteria and reduces subjective judgement during bore verification. Such precision means fewer reworks and a more predictable quality flow when used as a reference or master pin for end‑measurement applications. The narrow tolerance also allows integration into existing gauging stacks or fixture checks where a consistent reference diameter is required. Built for the workshop: robust form and protective packaging Produced in special steel and specified as a workshop execution, the test pin resists everyday handling while maintaining measurement stability. The 50 mm overall length provides sufficient engagement for many bore depths without excess overhang, improving handling and control in one‑hand inspection tasks. Delivery in a protective transport case ensures the pin reaches the workbench with minimal risk of transit damage, preserving surface integrity and dimensional reliability for immediate use. Practical benefits for production and quality workflows As a single test pin intended for end‑measurements, the component simplifies quick go/no‑go controls and spot checks on assemblies and mating parts. The compact form and predictable behaviour of the material reduce inspection time per part, contributing to throughput improvements in small‑batch production. Compatibility with common holding fixtures and pin blocks makes it easy to add this reference piece to existing measurement routines, supporting faster decision points and consistent documentation in quality records. For reliable end‑measurement in the workshop, choose the Metav IndustryLine gauge pin M323.H55 and contact Metav Werkzeuge GmbH in Emmerich for tailored technical guidance by e‑mail or phone Technical data Article number: M323.H55 GTIN: 4061905071423 Label: Test pin, single, 17.55 mm length 50 mm Manufacturer: Metav IndustryLine Facts Nominal diameter: 17.55 mm Overall length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop execution Supplied in transport case Intended use: end‑measurements / bore checking FAQ What level of dimensional accuracy does this pin provide? The gauge pin M323.H55 is specified with an accuracy of ±0.002 mm, making it suitable for fine inspection and repeatable end‑measurement tasks. Is the pin suitable for heavy daily use in a workshop environment? Yes — the workshop execution and special steel construction give the pin the robustness required for regular use on the shop floor. How is the product delivered to ensure protection? The M323.H55 is supplied in a protective transport case to prevent handling and transit damage and to maintain surface and dimensional integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.56mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
The combination of precise diameter control (17.56 mm), tight tolerance (±0.002 mm) and a robust 50 mm length makes this inspection pin a reliable tool for reproducible end‑measure checks; order the test pin directly via Metav Werkzeuge or consult our advisors for application support. Test pin, single — 17.56 mm diameter, 50 mm length (Metav IndustryLine) The Test pin, single, 17.56 mm diameter, 50 mm length is a precision inspection pin designed for end‑measure verification and gauge fixtures in workshop and production metrology Precision diameter 17.56 mm Tolerance ±0.002 mm Compact 50 mm length for confined checks Workshop version made from special steel Reproducible end‑measure results for production Consistent metrology reduces rework and speeds up set‑ups. The inspection pin offers a defined diameter of 17.56 mm with a verified tolerance of ±0.002 mm, which translates into repeatable fit checks and reliable pass/fail decisions on the shop floor. By using a dedicated gauge pin rather than an improvised tool, measurement uncertainty is minimised and fixture validation becomes straightforward. The documented accuracy supports traceable inspections and reduces the risk of scrap due to ambiguous fits. Built for workshop durability and simple handling A workshop‑specification construction in special steel provides wear resistance and stable geometry during frequent insertion and removal cycles. At a mass of 0.15 kg and a length of 50 mm, the pin combines manageable handling with sufficient stiffness for day‑to‑day verification tasks. The compact form factor is particularly useful where access is restricted or where multiple pins are stored in gauge sets. The robust finish and solid material choice help to maintain the precision diameter over many inspection cycles, which saves maintenance time and ensures consistent production quality. Practical integration and traceability in production workflows This single inspection pin (SKU M323.H56) is intended for end‑dimension checks, gauge blocks and fixture validation in machining and assembly processes. The clear specification — 17.56 mm diameter, 50 mm length, and ±0.002 mm tolerance — allows easy selection when matching pins to bore gauges or plug gauges. As a labelled inspection component, it supports inventory control and audit trails within quality systems. The product is suitable for repetitive quality checks where a defined reference diameter improves decision speed and reduces operator variability. Contact Metav Werkzeuge to request the M323.H56 test pin or to discuss how its 17.56 mm precision can be integrated into existing gauge fixtures — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M323.H56 GTIN: 4061905071430 Brand: Metav IndustryLine Weight: 0.15 kg Facts Diameter: 17.56 mm Length: 50 mm Tolerance: ±0.002 mm Measuring range (max): 17.56 mm Special features Workshop version Material: special steel Single test pin for end‑measure checks ECLASS: 21170231 FAQ What is the dimensional tolerance of this inspection pin? The inspection pin is manufactured to a tolerance of ±0.002 mm, making the M323.H56 suited to precise end‑measure verifications. Which material is used for the pin? The M323.H56 is produced from special steel in a workshop version designed for daily use and good wear resistance. What are the key dimensions supplied? This single test pin has a diameter of 17.56 mm and a length of 50 mm; mass is 0.15 kg; SKU M323.H56. Where is this pin typically used? The pin is intended for end‑dimension checks, gauge fixtures and quick pass/fail verifications in machining, assembly and quality control processes. Is the M323.H56 suitable for repeated shop‑floor checks? Yes — the workshop construction and material selection make the M323.H56 appropriate for frequent use while maintaining its dimensional stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.57mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of precise dimensional control, robust workshop construction and a compact form factor for reliable end‑measurements; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.H57 — 17.57 mm diameter, 50 mm length (Workshop grade) A workshop-grade gauge pin for end measurements and fit checks, supplied as a single inspection pin Workshop-grade construction Diameter 17.57 mm, length 50 mm Tolerance ±0.002 mm for tight fits Made from special steel for durability Consistent inspection results through robust workshop design The single inspection pin is engineered as a workshop grade measuring element, combining a special steel body with machining tolerances that support high repeatability in everyday quality control. The robust finish and compact geometry reduce the risk of damage during handling and mounting in gauge blocks or fixtures, which means fewer interruptions to inspection routines and greater uptime on the shop floor. The construction emphasises longevity and stable contact geometry, benefitting repetitive dimensional verification tasks. Precise end‑measurement and fit verification for small diameters With a nominal diameter of 17.57 mm and a length of 50 mm, the pin provides a clear reference for end‑measurements and go/no‑go checks in tight tolerances. The declared accuracy of ±0.002 mm addresses fine inspection requirements where surface contact and concentricity are critical; this tolerance ensures reliable assessment of bore fits, seating surfaces and transitional diameters. The small form factor makes the element suitable for integration into checking jigs and comparative gauges where space is limited. Compact format for micro‑scale checks and fixture testing The product sits in the compact measurement segment, ideal for fine mechanical and workshop applications that demand manageable handling without sacrificing metrological quality. Its compact format supports quick positioning in fixtures and fast manual transfers between stations, improving inspection throughput. The single‑piece design is particularly suited to end‑face inspections and go/no‑go plug tests for components with small diameters, delivering a practical balance between reach and rigidity for routine quality assurance. For supply or tailored advice on using the Metav IndustryLine gauge pin M323.H57 in measurement fixtures, contact Metav Werkzeuge for local delivery from Emmerich and expert product guidance Technical data SKU: M323.H57 GTIN: 4061905071447 Label: Prüfstift, einzeln, 17,57 mm Länge 50 mm Eclass: 21170231 Facts Diameter: 17.57 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Material: Special steel Workshop execution (Werkstatt‑Ausführung) Single inspection pin for end measurements FAQ What are the exact dimensions of this inspection pin? The inspection pin M323.H57 has a nominal diameter of 17.57 mm and a length of 50 mm; the SKU is M323.H57. What tolerance does the pin offer for fit testing? The pin is specified with a tolerance of ±0.002 mm, suitable for precise fit verification and repeatable end‑measurements. What material is used for the pin? The gauge pin is made from special steel, chosen for mechanical stability and wear resistance in workshop use. Which applications suit this workshop‑grade inspection pin? This workshop execution is suited to end‑face checks, bore fit tests and fixture integration where a compact, robust reference pin is required; it is particularly useful for small‑diameter components and routine quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.58mm Gauge Pin 50mm Length Workshop Version, Special Steel ±0.002mm - Metav IndustryLine
The combination of workshop‑grade durability, a precisely ground diameter of 17.58 mm and a verified tolerance of ±0.002 mm delivers consistent end‑of‑line verification for production parts; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.H58 — single test pin, diameter 17.58 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.H58 engineered for accurate go/no‑go checks, pin sizing and dimensional verification in workshop inspection and assembly operations. Workshop‑grade special steel construction Precisely ground diameter 17.58 mm Tolerance ±0.002 mm for tight checks Compact 50 mm length for versatile probing Reliable accuracy for routine inspection The pin is designed to provide consistent measuring results in repetitive inspection tasks. With a nominal diameter of 17.58 mm and a verified ±0.002 mm deviation, this test pin supports clear pass/fail decisions during manufacturing control. The combination of a ground diameter and tight tolerance reduces ambiguity in fits and clearances, helping to prevent downstream rework. As a precision tool for component verification, it integrates well into standard inspection benches and fixture checks, improving throughput through dependable sizing. Built to withstand workshop conditions Constructed from special steel in a workshop version finish, the pin offers resistance to abrasion and frequent handling typical of a production environment. The 50 mm length provides sufficient engagement for many locating and gauging tasks while keeping the tool easy to handle; the listed weight of 0.15 kg reflects a compact, manoeuvrable design that does not fatally increase fixture inertia. Heat treatment and surface grinding deliver long service life and stable contact geometry, so wear‑related measurement drift is minimised and maintenance intervals are extended. Integrates into quality processes with clear traceability As a single gauge pin for dimensional checks, the M323.H58 suits assembly verification, contractor handovers and end‑mass inspection where repeatability is essential. The straightforward geometry enables rapid substitution in gauge sets and fixtures, while the clear SKU and GTIN permit unambiguous inventory management and traceability. Used alongside calibrated reference standards and documented inspection routines, the pin supports reproducible measurement results and helps maintain quality records across production batches. Contact Metav Werkzeuge for specification matching, availability from our Emmerich warehouse and tailored advice on incorporating the Metav IndustryLine gauge pin into existing inspection routines Technical data Article number / SKU: M323.H58 GTIN: 4061905071454 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 17,58 mm Länge 50 mm Facts Diameter: 17.58 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Single gauge pin Category: Messstifte FAQ What accuracy can be expected from this gauge pin? The M323.H58 gauge pin is specified with a tolerance of ±0.002 mm, making it suitable for fine dimensional checks and tight fit verification. Which material is used for the pin and why does it matter? This test pin is made from special steel; the material choice gives improved wear resistance and dimensional stability under routine workshop handling for the Metav IndustryLine pin. Is the gauge pin suitable for fixture and assembly checks? Yes, the 50 mm length and compact mass of the M323.H58 make it well suited for locating, fixture checks and assembly verification where a robust, repeatable pin is required. How is the product identified for stock and traceability? Identification is provided by the SKU M323.H58 and GTIN 4061905071454, which support clear inventory control and traceability in production and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.59mm Gauge Pin 50mm Length Workshop Version, Special Steel in Case - Metav IndustryLine
The combination of a 17.59 mm diameter and a tight ±0.002 mm tolerance delivers dependable end‑measure control for workshop inspection routines; the 50 mm length and special steel construction support repeatable seating and long service life. Order the part directly via Metav Werkzeuge or contact the consultants for application advice and fast supply from Emmerich. Metav IndustryLine gauge pin M323.H59 — 17.59 mm diameter, 50 mm length The gauge pin M323.H59 is a single precision test pin for end‑measure checks and dimensional reference work in workshop and production inspection. Precision tolerance ±0.002 mm Diameter 17.59 mm, length 50 mm Made from special steel Workshop execution, robust design Ensure conformity with a high‑precision reference A tight tolerance of ±0.002 mm means the pin functions as a reliable reference for end‑measure inspections and pass/fail checks where small deviations matter. The marked accuracy aids traceable decision‑making in quality workflows, reducing the risk of rework and shipment of non‑conforming parts. Using a defined gauge diameter such as 17.59 mm helps to standardise inspection steps and maintain consistent measurement conditions across repeated checks. Built for repeatability and durable handling Constructed from special steel and specified at 50 mm length, the pin is designed for robust everyday use in a workshop environment. Its mass and dimensions (weight 0.15 kg) support stable seating in fixtures and measuring benches, which improves repeatability during manual handling. The workshop execution prioritises practical resilience so that dimensional checks remain consistent over time, contributing to lower measurement uncertainty in routine quality control. Easy identification and integration into inspection processes Delivered as a single test pin, the item integrates straightforwardly into gauge sets, plug gauges or fixture checks where an exact end‑measure reference is required. The product is traceable by SKU and GTIN for inventory and procurement purposes, supporting orderly stock management and clear replacement planning. Its specification targets end‑measure applications, helping to align incoming inspection, in‑process checks and final acceptance testing with a compact, high‑accuracy reference component. Specify the Metav IndustryLine gauge pin M323.H59 for robust end‑measure standards — contact Metav Werkzeuge in Emmerich for tailored technical advice and reliable delivery from stock Technical data Article number: M323.H59 GTIN: 4061905071461 Label: Prüfstift, einzeln, 17,59 mm Länge 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 17.59 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop execution Single piece delivery Story trigger: endmasse FAQ What tolerance does this gauge pin provide? The gauge pin M323.H59 is specified with a tolerance of ±0.002 mm, making it suitable for high‑precision end‑measure checks in workshop inspection routines. What material is used for the test pin? This test pin is made from special steel, a choice that supports durability and consistent seating during repeated measurements. For which inspection tasks is the pin suitable? The pin is intended for end‑measure and dimensional reference checks, where a defined 17.59 mm diameter and stable length assist in verifying component conformity. How is the item supplied and identified? The product is supplied as a single test pin and can be identified by SKU M323.H59 and GTIN 4061905071461 for procurement and inventory management. Can this pin be added to existing gauge blocks or fixtures? Yes; as a compact, high‑accuracy reference element the pin is suitable for integration into gauge assemblies and fixture checks to standardise measurement routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.61mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial accuracy, a compact micro range and a hardened working finish for reliable end-dimension checks. The precise diameter and short length support fast in-process control and repeatable inspection routines; order the gauge pin directly via Metav Werkzeuge or consult our technical team for specification matching. Gauge pin M323.H61 – Gauge pin Ø 17.61 mm, 50 mm length (Metav IndustryLine) A compact gauge pin, the M323.H61 is intended for precise end-dimension verification in workshop and inspection environments. High accuracy ±0.002 mm Diameter exactly 17.61 mm 50 mm overall length Workshop version in special steel Precision designed for critical inspection tasks The M323.H61 gauge pin is built for repeatable end-dimension checks where tight tolerances matter. With a stated accuracy of ±0.002 mm, the pin suits applications that require fine control over final sizes in small bores and fitted parts. The compact diameter of 17.61 mm and a 50 mm shank provide a stable contact length that reduces measurement scatter compared with longer, more flexible gauges. In practical terms, this means fewer rejections due to measurement variability and a consistent basis for in-process acceptance criteria. Robust workshop execution for everyday use Delivered as a workshop version, the test pin is made from special steel and finished to withstand routine handling. The material choice and processing ensure surface integrity and wear resistance during repeated engagement with component seats and gauging fixtures. The short overall length keeps the gauge stiff under manual use, improving handling in bench or fixture work and making it less prone to bending-induced error during insertion and removal. Traceability and handling that fit the workflow The pin is supplied ready for integration into inspection routines; its compact size simplifies storage and handling while enabling rapid exchange between setups. The design supports quick bench checks and slotting into gauge blocks, jigs or dedicated holders without elaborate fixturing. A clear product code (M323.H61) and machine-readable GTIN help to keep inventory and calibration records synchronised with shop-floor documentation and quality systems. Practical advantages in the measurement chain For suppliers and shops that prioritise a predictable measurement chain, this gauge pin offers a straightforward solution: precise nominal diameter, defined contact length and an industrial finish that tolerates frequent use. The construction minimises the need for additional handling precautions and makes the component suitable for serial checking, final assembly inspection or quick verification during set-up processes. For supply, calibration options and logistics, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 to arrange delivery of the Metav IndustryLine gauge pin M323.H61 and discuss compatibility with existing gauges and fixtures. Technical Data Article number: M323.H61 GTIN: 4061905071973 Label: Prüfstift, einzeln, 17,61 mm Länge 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 17.61 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Compact micro-range component Supplied for immediate inspection use FAQ What tolerance does the gauge pin guarantee? The gauge pin M323.H61 is specified with an accuracy of ±0.002 mm, making it suitable for fine inspection tasks requiring tight dimensional control. Is the pin suitable for repeated shop‑floor use? Yes, the workshop execution and special steel construction of the M323.H61 are intended for frequent use in inspection and assembly environments. How should the gauge pin be stored to preserve accuracy? Store the gauge pin in a dry, dust‑free location and keep it in its protective packaging between uses to avoid nicks and contamination that could affect the measuring surface. Can this pin be integrated into fixture or jig checks? The compact diameter and 50 mm length of the M323.H61 make it straightforward to mount in holders or use as a reference in bespoke gauging fixtures. Is the product traceable for quality records? Yes; the M323.H61 is delivered with product identification (SKU and GTIN) to support inventory and quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.62mm Gauge Pin, Single 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of precise dimensional control, robust workshop construction and traceable identification for reliable end‑measurement tasks — order the gauge pin directly via Metav Werkzeuge or contact our consultants for tailored advice. Gauge pin M323.H62, 17.62 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin M323.H62 is a precision test pin designed for end‑measurement and serial inspection in workshop and production environments. Workshop version with robust finish Diameter controlled to 17.62 mm tolerance 50 mm length for compact fixture use Accuracy ±0.002 mm for repeatable checks Faster, traceable inspection through true precision A compact inspection tool reduces cycle times in quality control. The gauge pin delivers precision down to ±0.002 mm, which shortens decision loops in serial testing and minimises rework. Its nominal size of 17.62 mm and 50 mm length make it suitable for plug‑gauge checks and end‑measurement of mating parts; the tight tolerance ensures that pass/fail decisions are based on measurable, reproducible criteria rather than approximation. Where consistent measurement results are a production KPI, the instrument contributes directly to throughput and scrap reduction. Durable workshop construction for everyday use Built as a workshop version, the pin withstands frequent handling and repeated insertion cycles. Manufactured from special steel, the component offers a mix of surface hardness and dimensional stability that keeps wear rates low under regular use. The single‑unit configuration supports straightforward inventorying and makes the part ideal for small batches or targeted replacement in inspection jigs. Clear material choice and solid construction translate into low lifetime cost and dependable service in routine metrology tasks. Simple integration into inspection workflows The test pin supports common inspection tasks such as end‑measurement and functional gauging within fixtures and checking devices. Its compact geometry allows it to be mounted or used free‑hand where space is restricted, and the discrete size is compatible with many standard plug‑gauge holders and test rigs. Traceable identifiers, including the SKU and GTIN recorded with each item, facilitate quality records and traceability across production lots and audits. The tool’s straightforward specification eases communication between workshop personnel and quality engineers when defining acceptance criteria. Choose the Metav IndustryLine gauge pin M323.H62 for robust workshop inspection and clear measurement results — contact Metav Werkzeuge for purchasing or technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.H62 GTIN: 4061905071980 Brand: Metav IndustryLine Label: Gauge pin, single, 17.62 mm, length 50 mm Facts Diameter: 17.62 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Workshop version Single unit delivery Material: special steel Intended for end‑measurement FAQ What is the intended application of this gauge pin? The gauge pin M323.H62 is intended for end‑measurement and plug‑gauge checks in workshop and production inspection routines. How precise is the M323.H62 in routine use? This Metav IndustryLine test pin offers an accuracy of ±0.002 mm, suitable for tight go/no‑go and dimensional checks. Is the pin supplied as a single unit or in sets? The product is supplied as a single unit; the item is described as a single test pin and is suitable for targeted replacement or use in single‑station fixtures. Which material is used for the pin and why does it matter? The pin is made from special steel, chosen for wear resistance and dimensional stability to ensure long service life under repeated inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.63mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise workshop inspection with a robust 17.63 mm diameter pin, 50 mm usable length and a verified positional accuracy of ±0.002 mm for dependable end‑measure readings; order the gauge pin directly from Metav Werkzeuge or consult our product specialists for application advice. Gauge pin, single, 17.63 mm, 50 mm length — Metav IndustryLine The Gauge pin, single, 17.63 mm, 50 mm length is a hardened inspection pin for end‑measure and bore checking, designed for routine workshop inspection and component control. Workshop‑grade special steel construction Diameter 17.63 mm for end‑measure checks 50 mm length for secure insertion depth Supplied in a protective transport case Reliable geometry for repeatable end‑measurement This inspection pin delivers a consistent reference for end‑measure tasks and bore gauging where repeatability matters. The calibrated nominal diameter of 17.63 mm provides a clear go/no‑go datum for fit checks and end‑length verification. Owing to the fine positional tolerance of ±0.002 mm, the pin is suitable for high‑accuracy routine checks in maintenance benches and inspection stations, reducing rework and measurement uncertainty. Material choice and mechanical durability explained Manufactured from special steel, the component combines surface hardness with resistance to wear in regular workshop use. The 50 mm overall length gives sufficient engagement for most insertion checks while retaining good handling and stability. The workshop design balances toughness with manageable mass, so the pin withstands repeated insertion cycles without premature deformation, supporting longer intervals between replacements. Practical handling and storage for everyday use As a single‑item inspection solution, the pin is optimised for quick tool‑room tasks and portable inspection kits. The protective transport case ensures safe handling and prevents surface damage that would otherwise affect measurement integrity. The product’s practical design shortens set‑up time during quality control rounds and keeps inspection routines efficient and predictable. Traceability and identification for professional workflows Clear identification and traceability are provided through the manufacturer SKU and GTIN, aiding inventory control and process documentation. The compact format integrates easily into existing inspection sets and provides a stable reference for end‑measure procedures in production, assembly and maintenance environments, supporting documented quality workflows. For application matching or batch purchases contact Metav Werkzeuge in Emmerich for tailored advice and order processing via +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M323.H63 GTIN: 4061905071997 Manufacturer: Metav IndustryLine Facts Diameter: 17.63 mm Overall length: 50 mm Tolerance / positional accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop execution Single item (individual pin) Supplied in protective transport case FAQ What is the intended use of this inspection pin? The inspection pin is intended for end‑measure and bore checking as a reliable reference for insertion and fit verifications in workshop inspection tasks. Which materials is the pin suitable for measuring against? The pin itself is made from special steel and is used to check component bores and mating parts made from typical workshop materials such as steel and aluminium. How precise are the measurements achieved with this pin? The pin is produced to a positional accuracy of ±0.002 mm, providing high repeatability for routine inspection and go/no‑go assessments. Is this item traceable for quality documentation? Yes, the product carries the GTIN 4061905071997 and article number M323.H63 for inventory and traceability purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.64mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from workshop-grade construction, special steel material and a tight ±0.002 mm tolerance for reproducible end-measure checks; these characteristics support reliable in-process inspection and consistent batch acceptance. Order the gauge pin directly via Metav Werkzeuge or consult the advisors if further specification is required. Gauge pin, single, 17.64 mm — 50 mm length (Metav IndustryLine) The gauge pin, single, 17.64 mm, length 50 mm is a workshop-grade inspection pin designed for precise end-measure and go/no-go checks in production and assembly environments. Workshop version for industrial use Precision diameter 17.64 mm Length 50 mm for consistent reach High accuracy ±0.002 mm Stable dimensional reference for routine checks The inspection pin serves as a compact, stable dimensional reference where repeatability matters. Constructed from special steel, the probe maintains shape under regular handling and contact, supporting reproducible end-measure outcomes with a verified positional variation of ±0.002 mm. Such tolerance makes the component suitable for precise acceptance checks on shafts, bores and mating parts where small deviations can affect assembly performance. Designed for efficient workflow and handling At 50 mm length and approximately 0.15 kg mass, this probe balances reach and manoeuvrability to fit bench and jig environments without adding unnecessary bulk. The 50 mm length gives access to recessed features while the compact form supports fast insertion and withdrawal during sampling routines, helping to keep inspection cycles short and throughput steady. The workshop execution emphasises durability for frequent use on the shop floor. Integrates with inspection processes and fixtures As a standard-dimension gauge pin, the component is intended for straightforward integration into existing inspection jigs and fixture arrays, simplifying checks during first-article inspection and routine quality control. Using a fixed-dimension probe reduces setup complexity and supports consistent measurement logs, which contributes to traceable manufacturing decisions and fewer rework cycles. The combination of a clearly defined diameter and tight tolerance aids compatibility with calibrated test equipment and established metrology workflows. For a precision partner that democratises accuracy across workshops, contact Metav Werkzeuge to source the Metav IndustryLine gauge pin M323.H64 and secure consistent inspection performance for production checks. Technical data Article number: M323.H64 GTIN: 4061905072000 Label: Prüfstift, einzeln, 17,64 mm Länge 50 mm Category: Messstifte Facts Diameter: 17.64 mm Length: 50 mm Weight: 0.15 kg Tolerance / variation: ±0.002 mm Special features Material: Special steel Workshop execution Image asset available FAQ What are the nominal dimensions of the gauge pin? The gauge pin is specified with a diameter of 17.64 mm and an overall length of 50 mm; it is listed as gauge pin, single, 17.64 mm, length 50 mm (Metav IndustryLine, SKU M323.H64). What level of accuracy does this inspection pin provide? The inspection pin is specified with a positional variation of ±0.002 mm, making it suitable for precise end-measure and acceptance checks in workshop environments. Which applications are appropriate for this probe? The probe is intended for end-measure checks, go/no-go inspections and routine dimensional verification on shafts, bores and mating components within production and assembly workflows. Is the material suitable for repeated shop-floor use? The pin is made from special steel and supplied in a workshop-grade execution, designed to withstand frequent handling typical of industrial inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.65mm Gauge Pin, Single, 50mm Length, Workshop Version, Special Steel, ±0.002mm, Supplied in Case - Metav IndustryLine
Take advantage of ±0.002 mm tolerance and a 17.65 mm fixed diameter in a workshop‑grade gauge pin supplied in a transport case; this combination ensures repeatable end‑measure checks and low handling risk. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, 17.65 mm Ø – 50 mm length (Metav IndustryLine) The gauge pin, single, 17.65 mm Ø, 50 mm length is a compact workshop‑grade test pin for reliable end‑measure verification and assembly checks in machining and inspection routines. Workshop‑grade execution, robust finish Diameter 17.65 mm, length 50 mm Tolerance ±0.002 mm for precise checks Precision that secures process stability The pin delivers measurable improvement in repeatability thanks to its ±0.002 mm manufacturing tolerance, which translates into fewer measurement‑related rejects and more predictable assembly outcomes. As a fixed‑diameter reference element, the component provides an objective datum for bore checks and end‑measure verifications; operators and quality engineers benefit from a clearly defined gauge value rather than relying on inferred fits. The technical certainty of the 17.65 mm reference reduces rework and supports consistent quality documentation. Robust design for everyday workshop use Manufactured from special steel, the probe is configured as a workshop‑grade tool intended to withstand frequent handling and the rigours of production environments. The 50 mm usable length combines reach with stiffness, helping to avoid bending errors during insertion and extraction. Delivery in a protective transport case preserves surface condition and dimensional integrity during storage and transit, making the item practical for mobile inspection tasks or shared tool cabinets without additional packaging work. Practical application in inspection and assembly workflows As a single gauge pin, this test pin suits quick go/no‑go verifications, alignment tasks and end‑measure validation in fixtures and assemblies where a precise, fixed reference is required. The pin integrates easily into existing checking procedures and can serve as a repeatable datum for comparative measurements or as a reference when setting up jigs. The Metav IndustryLine provenance ensures compatibility with an extensive range of workshop metrology accessories, simplifying procurement and replacement planning for quality teams familiar with modular inspection components. For dependable end‑measure precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for availability and expert advice on integrating this gauge pin into inspection workflows Technical Data Article number: M323.H65 GTIN: 4061905069765 Brand: Metav IndustryLine Facts Diameter: 17.65 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop execution Supplied in transport case Single piece gauge pin FAQ What tolerance can be expected from this gauge pin? The gauge pin is manufactured to a tolerance of ±0.002 mm, providing high repeatability for end‑measure checks with the Metav IndustryLine single pin (SKU M323.H65). Is the pin suitable for routine bore checks and alignment tasks? Yes, the fixed 17.65 mm diameter and 50 mm usable length make the pin appropriate for quick bore verifications, alignment and assembly datum checks in workshop environments. How is the pin protected during transport and storage? The single gauge pin is supplied in a protective transport case to preserve surface condition and dimensional integrity during storage or mobile use. What materials is the pin made from and what does that mean for durability? Constructed from special steel, the pin is designed for workshop durability and repeated handling, offering resistance to wear in standard inspection and setup tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.66mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a compact inspection solution that combines high dimensional accuracy (±0.002 mm) with robust special‑steel construction and a standard 50 mm measuring shank; ideal for reliable end measurements in production and quality control. Order the item directly via Metav Werkzeuge or consult the Metav specialists for application advice. Gauge pin M323.H66 — single test pin, ø17.66 mm, 50 mm length (Metav IndustryLine) A single precision gauge pin designed for end‑measurement and fit inspection in workshop and production metrology. Single gauge pin ø17.66 mm, length 50 mm High accuracy ±0.002 mm tolerance Machined from special steel for durability Supplied individually for straightforward inspection Consistent dimensional control for quality assurance The compact test pin delivers reproducible end measurements thanks to a tight manufacturing tolerance of ±0.002 mm. This level of accuracy supports rapid go/no‑go checks and sampling inspections in a serial production environment, reducing the need for repeated rework. The pin’s nominal diameter ø17.66 mm and 50 mm measuring length make it suitable for checking bore seats, plug fits and end‑mass inspections where a stable reference is essential. Using a defined reference pin like this streamlines measurement routines and speeds up acceptance checks without compromising traceability. Durable construction for repeated use under workshop conditions Manufactured from special steel, the test pin resists wear and maintains dimensional integrity across frequent handling. The workshop design emphasises a balance between surface hardness and machinability so that the contact face remains intact under typical inspection cycles. The component’s measured mass and solid construction contribute to stable seating in fixtures and minimise deviations caused by incidental deformation. As a hardened and precisely machined testing element, it provides long‑term service life and predictable performance for day‑to‑day metrology tasks. Easy integration into inspection workflows and tool sets Delivered as an individual item, the pin is straightforward to insert into existing gauge sets, fixture blocks or handheld test assemblies. The simple geometry allows rapid visual and tactile verification of fits and clear pass/fail assessment without complex adjustment. The compact format also supports portable inspection routines on the shop floor, enabling fast checks close to the machining process and therefore reducing downtime. For inventory and logistics, the item is identified by its SKU M323.H66 and GTIN for streamlined ordering and stock management. Practical benefits for production and maintenance teams A precision test pin of this specification reduces measurement uncertainty during assembly checks and contributes to consistent part interchangeability. By standardising on defined reference elements with ±0.002 mm accuracy, quality teams can document measurement outcomes more reliably and make faster decisions about process adjustments. The robust material choice and straightforward form factor mean fewer replacements and lower lifecycle handling costs compared with ad hoc or improvised gauges. Contact Metav Werkzeuge for application guidance and secure procurement of Metav IndustryLine measurement elements—phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: M323.H66 GTIN: 4061905069772 Label: Gauge pin, single, ø17.66 mm, length 50 mm Manufacturer: Metav IndustryLine Core specifications Diameter: 17.66 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Features Single test pin (delivered individually) Workshop version (Werkstatt‑Ausführung) Material: special steel Intended for end‑measurement and fit inspection FAQ What is the intended use of this gauge pin? The pin is intended for end‑measurement and fit inspection tasks; the gauge pin M323.H66 is suited to checking bore seats and plug fits where a precise reference diameter is required. How accurate is the pin and what does that mean in practice? Manufactured to ±0.002 mm, the pin provides tight dimensional control for production sampling and go/no‑go verification, reducing ambiguity in pass/fail decisions. What material is used and how does it affect durability? The component is made from special steel, chosen for wear resistance and stability so that the test face retains its dimensions over repeated use. Can the pin be used in handheld checks or only in fixtures? The compact form and 50 mm shank allow use both in fixture blocks and in portable, handheld inspection routines for immediate on‑machine checks. Is the item traceable for inventory and procurement? Yes; the pin is listed under SKU M323.H66 with GTIN 4061905069772 for straightforward ordering and stock control. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.67mm Test Pin, Single, 50mm Length, Special Steel, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-ready robustness, sub-micron repeatability and compact dimensions for reliable end‑measure checks. Order the gage pin directly via Metav Werkzeuge or consult our specialists for rapid procurement from Emmerich. Gauge pin M323.H67 — single, Ø 17.67 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.H67 is a precision test pin for end‑measurement tasks and inspection jigs in workshop and production environments. Workshop design for daily use Tight tolerance of ±0.002 mm Made from special steel for durability Compact 50 mm length for confined fixtures Consistent dimensional control for inspection tasks The M323.H67 serves as a compact reference element when checking final dimensions and fits. The Ø 17.67 mm nominal diameter combined with the tolerance of ±0.002 mm provides a measurable trust level for go/no‑go decisions and fixture setting. Using a hardened reference pin minimises wear at contact points so that repeatability remains high even under frequent use. This enables workplaces to reduce rework and maintain assembly tolerances with confidence. Robust materials and workshop readiness Constructed from special steel, the pin combines surface hardness with resistance to deformation during routine handling. The 50 mm length offers sufficient engagement for many end‑measure applications without demanding excessive clamping space. The workshop version specification indicates a build tuned to practical use: easy to handle, robust against impacts and compatible with common inspection setups in machining and metalworking shops. Practical integration into measurement routines As a single test pin, this component is straightforward to install in gauges, nests and comparator fixtures. Its compact profile simplifies placement in tight assemblies and enables precise localisation when aligning mating parts. Where frequent verification is required, the element’s geometry supports rapid substitution and minimal adjustment effort, contributing to shorter inspection cycles and consistent quality checks. Clear advantages for production and toolrooms The combination of a small footprint and precision grading supports faster setup times on jigs and gauging equipment. Because the pin holds a narrow tolerance band, it is suitable for final control points and dimensional verification where a definitive pass/fail result is needed. The overall usability reduces the dependence on complex measuring procedures and streamlines routine controls in small‑ to medium‑series production. Documentation and traceability for procurement The product arrives labelled with its SKU M323.H67 and GTIN for inventory control and traceability. Weight and dimensions are recorded to simplify storage planning and handling. For organisations building a standardised set of reference elements, these identifiers ease cataloguing and replacement ordering from the central supplier. For dependable end‑measure checks, specify the Metav IndustryLine gauge pin M323.H67 and contact Metav Werkzeuge for personalised advice and swift supply from our Emmerich facility. Technical data SKU: M323.H67 GTIN: 4061905070075 Facts Diameter: 17.67 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Single gauge pin for end‑measure checks Category: Gauge pins FAQ What is the primary use of this gauge pin? The gauge pin is intended for end‑measure checks and fixture reference points in inspection and assembly operations, providing a precise physical reference for go/no‑go decisions. Is the tolerance suitable for precision assembly tasks? Yes. With a declared deviation of ±0.002 mm, the M323.H67 meets tight repeatability requirements for many precision assembly and inspection workflows. Which material is the pin made from and why does that matter? The pin is made from special steel, chosen for surface hardness and resistance to wear, ensuring long‑term dimensional stability under regular contact. Can this pin be used in confined fixtures and jigs? Its 50 mm length and compact diameter make it particularly suited to confined mounting positions and narrow gauge nests where space is limited. How can the M323.H67 be ordered or referenced for stock control? Order using SKU M323.H67 or GTIN 4061905070075; these identifiers support straightforward procurement and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.68mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of high dimensional fidelity and robust workshop construction to ensure consistent end measurements; the combination of ±0.002 mm tolerance and a 50 mm shaft delivers reliable repeatability in serial checks. Order directly via Metav Werkzeuge or consult the technical team for application guidance. Test pin (gauge pin) — 17.68 mm diameter, 50 mm length | Metav IndustryLine The Test pin, single, 17.68 mm diameter, 50 mm length is a workshop-grade gauge designed for precise end‑measurement and assembly checks in inspection and fixture setups. Workshop-grade construction Diameter 17.68 mm precision Length 50 mm for robust handling Tolerance ±0.002 mm accuracy Reduce rework with measurable accuracy The core advantage of this gauge pin is its high dimensional accuracy: with a declared tolerance of ±0.002 mm, the component supports tight pass/fail decisions during incoming inspection and routine quality control. Such precision reduces the need for rework and rejects by ensuring that mating fits and critical clearances are checked against a dependable reference. The specification is expressed in a way that is directly comparable to drawing tolerances, enabling straightforward use in statistical process control and first-article inspection reports. Built for demanding workshop use Manufactured from special steel, the pin is finished to a hard-wearing surface that resists light impact and everyday handling in production environments. The 50 mm shaft length and a mass of 0.15 kg provide a stable feel that assists secure positioning when checking bore concentricity or end faces. The robust geometry simplifies handling in fixtures and gauging jigs, and the single‑piece supply format supports replacement and spare-part strategies in maintenance stocks. Durability here translates into longer service intervals and fewer calibration cycles. Easy integration into inspection routines This gauge pin is suitable for direct use in go/no‑go checks, plug gauges and bench inspection tasks where a precise cylindrical reference is required. The diameter of 17.68 mm makes it appropriate for verifying medium bore sizes and assemblies where tight clearances matter. Traceability is supported via the SKU and GTIN identifiers, allowing the pin to be logged into asset registers or quality management systems. Where configuration notes are required, provide the SKU M323.H68 for unambiguous procurement and inventory control. Request tailored advice from Metav Werkzeuge in Emmerich on the suitability of the M323.H68 gauge pin for specific inspection tasks or to arrange delivery and documentation Technical data Article number: M323.H68 GTIN: 4061905070082 Weight: 0.15 kg Material: special steel Length: 50 mm Diameter: 17.68 mm Tolerance: ±0.002 mm Facts Mass: 0.15 kg Diameter: 17.68 mm Shaft length: 50 mm GTIN: 4061905070082 Special features Workshop execution Single item delivery SKU: M323.H68 FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.H68 is specified with a tolerance of ±0.002 mm, suitable for fine inspection tasks that require close dimensional control. Is the test pin suitable for use in fixtures and jigs? Yes, the 50 mm shaft and robust construction make this gauge pin appropriate for fixtures, assembly checks and bench gauging in workshop environments. What material is the pin made from and how does that affect use? The pin is produced from special steel, providing wear resistance and dimensional stability under normal workshop conditions. How is the item identified for ordering and inventory? Order and catalogue the product using SKU M323.H68 or GTIN 4061905070082 to ensure accurate procurement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.69mm Test Pin, Single, 50mm Length, Workshop Finish - Metav IndustryLine
Precision control and workshop durability combine to give a reliable end-measurement solution: a special-steel gauge pin with a ±0.002 mm tolerance and compact 50 mm length for consistent fixture and bore checks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists if further specification is required. Gauge pin M323.H69 – single plug gauge, Ø 17.69 mm, 50 mm length A gauge pin, single, 17.69 mm, length 50 mm designed for workshop inspection and end‑dimension verification in production and maintenance environments. Workshop-grade construction Ø 17.69 mm, length 50 mm Tolerance ±0.002 mm Made from special steel Consistent measurement accuracy for routine inspection The compact plug provides repeatable results where small deviations matter. With a declared tolerance of ±0.002 mm, the pin exceeds typical workshop requirements and approaches precision-control levels used for end‑dimension checks. This accuracy reduces measurement uncertainty during quick go/no‑go verifications and contributes to reproducible quality control across batches. The specification is particularly valuable when comparing actual bores or fixture seats to design limits, providing an objective numerical basis for decisions. Durable design that stands up to workshop handling Built as a workshop version, the component combines a short 50 mm length with a stable diameter of 17.69 mm to keep bending and handling error to a minimum. The body is manufactured from special steel, selected for strength under repeated insertion and extraction cycles; this material choice supports long service life under normal shop use. The compact mass and balanced geometry make the item easy to handle during fast inspection routines while maintaining positional stability in jigs and checking fixtures. Practical integration into inspection workflows The pin is supplied with clear identification (GTIN and internal article code) to simplify stock management and traceability in inspection records. At 0.15 kg and with workshop‑orientated dimensions, the part integrates readily into handheld inspection sets or fixed gauge banks. The robust specification supports use for quick bore checks, assembly pre‑inspection and machine set‑up verification. For specification matching or to confirm suitability for a particular fixture, the Metav Werkzeuge team can advise on interchangeability and complementary gauge sets. Contact Metav Werkzeuge today to specify the M323.H69 gauge pin for your inspection routine or to request tailored advice from our measurement specialists in Emmerich. Technical data Article number: M323.H69 GTIN: 4061905070921 Manufacturer: Metav IndustryLine Label: Gauge pin, single, 17.69 mm length 50 mm Facts Diameter: 17.69 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Material: special steel Category: Gauge pin (Messstifte) FAQ What tolerance does this gauge pin offer? The gauge pin M323.H69 (Metav IndustryLine gauge pin) is specified with a tolerance of ±0.002 mm, suitable for high-precision workshop checks. Is the M323.H69 suitable for bore verification? Yes, the 17.69 mm diameter and robust workshop design make the M323.H69 appropriate for rapid bore and seating checks in fixtures and assemblies. What material is used for this plug gauge? The pin is made from special steel, chosen for durability under repeated inspection cycles and reliable dimensional stability. How heavy is the gauge pin and how does that affect handling? At approximately 0.15 kg, the pin is compact and easy to handle, supporting fast manual checks and good positional control in jigs. How is the part identified for inventory and traceability? The item is listed as M323.H69 with GTIN 4061905070921 to aid stock control and documentation in inspection protocols. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.6mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, workshop-grade robustness and a tight ±0.002 mm tolerance to speed up fit and inspection tasks. Order the part directly via Metav Werkzeuge or get tailored advice from our consultants to ensure the correct gauge selection for production control. Gauge pin, single, 17.6 mm × 50 mm — Workshop version (Metav IndustryLine) A gauge pin, single, 17.6 mm × 50 mm, designed for straightforward end‑measure and fit checks in workshop and inspection applications Workshop-ready construction Diameter 17.6 mm for accurate fit checks 50 mm overall length for compact inspections Special steel with ±0.002 mm tolerance Precision that reduces rework and speeds inspection The gauge pin M323.H60 delivers a reliable reference diameter of 17.6 mm with a specified positional tolerance of ±0.002 mm, making it suitable for dimensional verification where tight clearances matter. In practice, a consistent verification standard reduces false rejections and rework by ensuring mating bores or reference holes are checked against a stable, hardened reference. The compact 50 mm length keeps handling simple while maintaining sufficient engagement for confident fit assessments. Durable design for daily workshop routines Constructed from special steel, this test pin is finished for routine use in busy shop floors. The workshop-ready construction emphasises wear resistance and dimensional stability under regular handling, giving operators a dependable feel during tactile checks. The modest mass (approx. 0.15 kg) and compact geometry allow rapid manual mounting in fixtures or carriers without compromising on runout or concentricity during short inspection cycles. Practical integration into measurement workflows With its standardised diameter and plain cylindrical form, the pin integrates easily into go/no‑go fixtures, bench comparisons and handheld check routines. The defined ±0.002 mm tolerance provides a clear acceptance band for quick sorting tasks, while the simple geometry reduces interpretation effort for operators who perform repetitive checks. Where a traceable identification is required, the SKU and GTIN enable consistent inventory and process documentation. Traceability, identification and application notes The gauge pin is supplied as a single item and is ideal for checking ending dimensions and fit in assembly or repair operations. The workshop execution makes it a pragmatic choice for maintenance departments and production benches that demand repeatable checks without the overhead of complex fixtures. For use in formal calibration loops, supply and documentation options can be discussed with Metav Werkzeuge to match internal quality procedures. Secure reliable fit checks with Metav IndustryLine’s workshop gauge pin — contact Metav Werkzeuge in Emmerich for specification matching and order processing at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.H60 GTIN: 4061905071966 Label: Prüfstift, einzeln, 17,6 mm Länge 50 mm Facts Diameter: 17.6 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Workshop version Material: special steel Category: Messstifte FAQ What materials is the gauge pin made from? The gauge pin is manufactured from special steel, selected for wear resistance and dimensional stability in workshop use. Is the dimensional tolerance suitable for precision assembly checks? Yes. The item is specified with a ±0.002 mm tolerance, making it appropriate for many assembly and inspection tasks that require a close fit assessment. Can the pin be used in go/no‑go fixtures or jigs? The cylindrical geometry and standard diameter allow the pin to be incorporated into simple go/no‑go fixtures and bench jigs for rapid acceptance testing. What is the recommended application for the 50 mm length? A 50 mm overall length provides compact engagement for quick end‑measure inspections and for use where long insertion depths are not required. How is the item identified for stock and documentation purposes? The product is listed under SKU M323.H60 and GTIN 4061905071966, which supports consistent inventory control and traceability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.71mm Gauge Pin 50mm Length Workshop Finish, Special Steel - Metav IndustryLine
Take advantage of the combination of precise measuring tolerance, a compact micro class diameter, and a workshop-grade build for reliable end‑measure checks; order the part directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single – Ø 17.71 mm, 50 mm length (Metav IndustryLine) The gauge pin, single, 17.71 mm is a workshop-grade inspection pin designed for precise end‑measure verification and assembly gauge work in fine mechanical applications. Workshop-grade construction Diameter 17.71 mm nominal Length 50 mm overall High accuracy ±0.002 mm Precision where it counts for repeatable measurements The inspection pin delivers a high accuracy of ±0.002 mm, making it suitable for tasks that demand reproducible end‑measure checks. Manufactured from special steel, the component resists wear during repeated insertions and provides a stable reference surface. As a compact micro class gauge, the unit is particularly useful in fine mechanical workshops and jigs where short measuring lengths reduce bending and handling error. The close tolerance supports quality control routines and reduces the need for multiple rechecks, improving throughput. Compact format that improves handling and setup time With an overall length of 50 mm and a nominal diameter of 17.71 mm, this single‑piece pin is easy to seat in fixtures and gauges, shortening setup time on assembly stations. Its compact geometry keeps the centre of gravity close to the seating face, which lowers measurement uncertainty compared with longer probes. The straightforward design simplifies mounting and integration into existing checking fixtures, enabling rapid checks during production or inspection sequences and supporting smoother process control. Durable construction for workshop environments The workshop edition is produced from special steel and finished to maintain concentricity and surface integrity under frequent use. The robust material choice and machining quality ensure long service life, so maintenance intervals are extended and replacement frequency is reduced. The product suits applications linked to end‑measure verification or end‑masses, where a reliable, dimensionally stable reference pin is required. Metav IndustryLine’s approach focuses on consistent quality to support industrial workflows. Contact Metav Werkzeuge for technical advice on integrating Metav IndustryLine gauge pins into inspection fixtures or to check current stock and delivery options Technical Data Article number: M323.H71 GTIN: 4061905070945 Manufacturer: Metav IndustryLine Facts Diameter: 17.71 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop edition Category: Gauge pin (Messstifte) Application: End‑measure verification (end masses) FAQ What tolerance can be expected from this gauge pin? The gauge pin is manufactured to an accuracy of ±0.002 mm, offering stable results for end‑measure checks with the Metav IndustryLine single test pin (M323.H71). Is this pin suitable for precision fixture work in fine mechanics? Yes, the component’s compact diameter and 50 mm length place it in the micro class, making it well suited for fine mechanical fixtures and small‑part inspection. What material is the pin made from and how does that affect durability? The pin is made from special steel, chosen for wear resistance and dimensional stability under repeated use in workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.72mm Test Pin Workshop Version 50mm Length - Metav IndustryLine
Take advantage of precise dimensional control and workshop-ready robustness: the combination of ±0.002 mm tolerance, 17.72 mm diameter and a compact 50 mm length supports reliable end-dimension checks and quick fixture set-ups. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for integration advice. Gauge Pin, Single 17.72 mm Ø – 50 mm Length (Metav IndustryLine) The Gauge Pin, Single 17.72 mm Ø is a precision cylindrical gauge designed for fast verification of bore diameters and end dimensions in inspection and production environments. Precision tolerance ±0.002 mm Workshop-ready construction Diameter 17.72 mm, length 50 mm Manufactured from special steel Accurate, reproducible checks for routine inspection A compact cylindrical gauge delivers clear, reproducible results for go/no-go testing and dimensional verification. With a declared tolerance of ±0.002 mm, this pin supports high-precision spot checks that reduce measurement uncertainty and speed up quality control routines. The controlled diameter of 17.72 mm provides a defined reference for verifying bore sizes, while the short 50 mm length allows confident handling in confined fixtures. This combination reduces rework and shortens inspection cycles in production environments. Robust design made for the workshop floor Constructed from special steel, the pin resists wear under frequent use and preserves the critical diameter over repeated cycles. The workshop design emphasises practical handling: the compact form factor is easy to seat in fixtures and quick to exchange during batch checks. Low mass contributes to safe, ergonomic use in manual operations while delivering consistent contact conditions. These attributes make the gauge ideal where durability and repeatability are essential for operational efficiency. Seamless fit into inspection and toolmaking workflows As a standard cylindrical reference, the pin integrates into fixture set-up, tool inspection and final acceptance procedures. Its precise diameter and repeatable geometry support reliable alignment and verification tasks during assembly and jig adjustments. By providing a stable reference for end dimensions, the gauge helps engineers and technicians maintain process capability and reduce stoppages. Metav’s positioning as a precision partner ensures traceable supply and pragmatic advice for industrial application. Contact Metav Werkzeuge for tailored application guidance or to arrange supply of the Metav IndustryLine gauge pin M323.H72 to match specific inspection needs Technical Data Article number: M323.H72 GTIN: 4061905070952 Manufacturer: Metav IndustryLine Core specifications Diameter: 17.72 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Materials & features Material: special steel Design: workshop execution Type: single gauge pin Category: measuring pins FAQ What tolerance does the gauge pin offer? The gauge pin is specified with a tolerance of ±0.002 mm, providing high-precision dimensional checks for bore and end measurements. Which applications suit this gauge pin? This cylindrical reference is suitable for quick verification of hole diameters, fixture set-up and spot checks in production and inspection workflows. What material is the pin made from? The pin is made from special steel, selected for wear resistance and dimensional stability under frequent use. Can the pin be used for alignment in jigs and fixtures? Yes, the precise geometry and compact length make the pin suitable for alignment and verification tasks in jig and fixture assembly. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.73mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise dimensional control and robust workshop performance: the gauge pin combines a 17.73 mm reference diameter with a ±0.002 mm tolerance and a 50 mm working length for repeatable end‑dimension checks. Order the item directly via Metav Werkzeuge or consult our specialists for specification matching. Gauge pin M323.H73 — inspection gauge pin, 17.73 mm diameter, 50 mm length — Metav IndustryLine The gauge pin M323.H73 is a single inspection pin designed for accurate end‑measure checks and fit verification in production and workshop metrology. Workshop version for robust daily use Diameter 17.73 mm for precise fit control Tolerance ±0.002 mm for high accuracy Supplied in a protective transport case Accuracy that reduces rejects and avoids rework The core advantage of this inspection pin is its high dimensional accuracy: a nominal diameter of 17.73 mm held to ±0.002 mm provides a reliable go/no‑go reference for mating bores and plug fits. Such a tight tolerance supports consistent process control and reduces the risk of out‑of‑tolerance assemblies, which in turn decreases rework and inspection overhead. The measured stability helps maintain throughput while safeguarding component interchangeability. Durable workshop design for long service life Built as a workshop version, the pin is manufactured from special steel chosen for wear resistance and dimensional stability under routine handling. The 50 mm length gives a practical engagement depth for many end‑dimension checks while keeping the instrument easy to position. The material selection and robust manufacturing process contribute to extended service life and sustained repeatability, helping to lower total cost of ownership in demanding production environments. Practical handling, secure transport and easy inventorying Supplied as a single piece, the pin arrives ready for immediate use and is packaged in a protective transport case to prevent damage in transit. The compact weight and clear identification simplify storage and handling; the included GTIN aids tracing and inventory management. For workshop applications where quick verification is needed, the compact form factor and sturdy finish enable fast, confidence‑inspiring checks at the bench or on the shop floor. Contact Metav Werkzeuge for tailored advice and reliable supply of the Metav IndustryLine gauge pin M323.H73, delivered ready for workshop use Technical data Article number: M323.H73 GTIN: 4061905070969 Description: Gauge pin, diameter 17.73 mm, length 50 mm Material: Special steel Net weight: 0.15 kg Accuracy: ±0.002 mm Packaging: Protective transport case included Core specifications Diameter: 17.73 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Workshop version for daily industrial use Single piece delivery Designed for end‑dimension checks Robust finish for wear resistance FAQ What is the nominal diameter of this gauge pin? The nominal diameter of the gauge pin M323.H73 is 17.73 mm, specified for precise fit control. What tolerance can be expected from the gauge pin? The inspection pin is manufactured to a tolerance of ±0.002 mm, providing high‑precision verification for mating parts. Is the pin ready for immediate use on arrival? Yes — the Metav IndustryLine gauge pin M323.H73 is supplied as a single piece in a protective transport case and is ready for workshop inspection tasks. Which materials is the pin suitable to check? The pin serves as a dimensional reference for metallic and machined components where a 17.73 mm reference is required; it is made from special steel for durability and stable measurement results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.74mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Precision pairing of a 17.74 mm nominal diameter with a tight ±0.002 mm tolerance provides dependable gauging for workshop and light production use; the 50 mm length and special steel construction ensure robust handling and repeatable fits. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, 17.74 mm, 50 mm length — Workshop version, ±0.002 mm accuracy (Metav IndustryLine) Gauge pin, single, 17.74 mm, 50 mm length is a precision inspection pin intended for end‑size checks, go/no‑go gauging and fit verification in workshop and small‑series production environments Diameter 17.74 mm nominal fit Tight tolerance ±0.002 mm 50 mm length, workshop execution Made from special steel Consistent end‑size control for repeatable production results The Gauge pin, single, 17.74 mm, 50 mm length combines a precisely ground nominal diameter with a verified ±0.002 mm tolerance to support repeatable acceptance tests and fit verification. In practical terms, the close tolerance reduces rework by making go/no‑go judgements reliable and consistent. The pin's geometry and surface finish deliver stable contact conditions, which helps to minimise measurement scatter when used for final dimensional checks or as a reference plug in assembly procedures. Durable construction that withstands workshop handling Built in a workshop specification and manufactured from special steel, the pin provides improved wear resistance and dimensional stability under everyday use. The 50 mm shank gives sufficient engagement for secure probing without compromising access in confined gauges or fixtures. The balanced mass and compact form make the component easy to handle on the shop floor while its robust finish reduces the risk of surface damage that can affect fit and longevity. Practical integration, traceability and process benefit As a single inspection pin intended for direct use in quality routines, this pin simplifies routine checks and reduces cycle time during end‑of‑line inspection. Identification by SKU and GTIN supports traceability in production records and enables structured tool‑management. Combined with Metav’s market position as a precision distributor, the item is suitable where reliable gauging, simple handling and clear traceability are required for process control and supply‑chain documentation. For workshop‑grade accuracy from the Metav IndustryLine range and assistance with selection or application, contact Metav Werkzeuge for tailored advice and order guidance Technical data Article number: M323.H74 GTIN: 4061905070976 Category: Gauge pins Core specifications Diameter: 17.74 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop execution Single pin delivery Label: Prüfstift / gauge pin FAQ What is the declared tolerance for this gauge pin? The inspection pin is specified with a tolerance of ±0.002 mm, which ensures tight dimensional control for fit verification and go/no‑go checks. Is this pin suitable for workshop use and daily handling? Yes, the workshop execution and special steel construction make the pin appropriate for routine use in workshop and light production environments. Which dimensions identify this part for ordering and traceability? The pin is identified by SKU M323.H74 and GTIN 4061905070976; these references support ordering and inventory tracking for the gauge pin. Can the pin be used as a reference for assembly and final inspection? The pin is designed for end‑size checks and fit verification, providing a reliable reference when used within its specified tolerance and engagement length. What advantages does the Metav IndustryLine version offer? The Metav IndustryLine version combines workshop‑ready robustness with controlled tolerances and supply‑chain traceability, making it a pragmatic choice for production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com