Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
17.27mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Combine workshop-grade durability, ±0.002 mm repeatability and a compact 50 mm length to ensure reliable end measurements for precision inspection tasks; order the product directly via Metav Werkzeuge or ask our consultants if needed. Test pin M323.H27 – single inspection pin, Ø17.27 mm, 50 mm length (Metav IndustryLine) Test pin M323.H27 is a single inspection pin designed for precise end measurements and fixture checks in metrology applications; supplied as a workshop-grade component for machine-shop use Workshop execution, robust finishing High repeatability ±0.002 mm Special steel construction Compact Ø17.27 mm for micro applications Measurably reliable performance for routine inspection The inspection pin delivers a clear technical advantage where repeatability matters: the stated accuracy ±0.002 mm supports tight tolerance checks and consistent go/no-go assessments. Manufactured from special steel and finished for workshop use, this compact gauge component minimises runout and provides a stable contact surface for end measurements. Its 50 mm length offers a balance between stiffness and accessibility, reducing measurement variability when used in fixture checks or manual inspection stations. Compact design that suits micro measuring ranges Classified for the Micro measuring range (10–100 mm), this single pin is tailored to fine‑mechanical and small‑part quality control where handling and reproducibility are decisive. The nominal diameter Ø17.27 mm and short shank reduce leverage and bending, enabling repeatable contact with small features such as bores, pins and precision housings. As a dedicated gauge element, it integrates into pin plates, test fixtures and comparator setups, improving throughput in repetitive inspection tasks. Practical integration and workshop benefits The workshop-grade execution simplifies daily use: the geometry and material choice prioritise wear resistance under standard shop conditions and minimise downtime for replacement. Lightweight at 0.15 kg, the component is convenient to handle and store, while the clear SKU and GTIN simplify inventory control and traceability. Where consistent end measurements are required, the inspection pin provides a stable, easy-to-install option that complements existing metrology toolsets and enhances process reliability. Contact Metav Werkzeuge today to discuss how the M323.H27 inspection pin can be integrated into existing inspection fixtures or to request detailed technical data and supply options Technical data SKU: M323.H27 GTIN: 4061905072048 Material: Special steel Length: 50 mm Diameter: 17.27 mm Weight: 0.15 kg Accuracy (stated): ±0.002 mm Version: Workshop execution Facts Measuring class: Micro (10–100 mm) Product type: Single inspection/test pin Application focus: End measurements Special features Compact design for small-part inspection High repeatability for routine QC Workshop-grade finishing Story trigger: end measurements FAQ What is the declared accuracy of this inspection pin? The inspection pin M323.H27 is specified with an accuracy of ±0.002 mm, making it suitable for high‑repeatability end measurements in workshop environments. Which measuring range category does this pin belong to? This component falls into the Micro measuring range (10–100 mm), intended for fine mechanical and small‑part inspection tasks. Is the material corrosion‑resistant? The pin is made of special steel and finished for workshop use; specific corrosion‑resistant treatments are not detailed in the product data. Can this pin be used in existing test fixtures and pin plates? Yes, the M323.H27 single test pin is designed for straightforward integration in pin plates, fixtures and comparator setups where a compact Ø17.27 mm gauge element is required. What identifiers support inventory and traceability? Identification is provided via SKU M323.H27 and GTIN 4061905072048 for straightforward stock management and order processing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.28mm Gauge Pin 50mm Length Workshop Finish, Special Steel - Metav IndustryLine
Take advantage of the combination of high dimensional stability, a tight tolerance of ±0.002 mm, and rugged workshop design for dependable go/no‑go and reference checks. Order the gauge pin directly via Metav Werkzeuge or consult the product specialists for application advice. Gauge pin, single — Ø 17.28 mm, length 50 mm (Metav IndustryLine) A precision gauge pin designed as a single reference mandrel for dimensional checks and jig inspection in workshop environments. Single gauge pin Ø 17.28 mm length 50 mm Workshop version with transport protection Tolerance ±0.002 mm for repeatable checks Made from high‑grade special steel Repeatable reference measurements for quality control This single gauge pin is specified to a tolerance of ±0.002 mm, making it suitable as a repeatable reference for comparative and end‑measurement tasks. The 17.28 mm diameter and 50 mm overall length provide a compact datum that is simple to deploy in fixtures, plug gauges and inspection setups. Manufactured from special steel, the pin combines wear resistance with dimensional stability so that reference checks remain consistent over many cycles, reducing rework and inspection variance. Practical workshop design that protects the geometry Engineered as a workshop version, the pin tolerates the rigours of daily use while remaining easy to handle. At approximately 0.15 kg, the component is lightweight yet robust, facilitating fast placement in gauges and locators without causing handling fatigue. Delivery includes a protective transport box, which safeguards the finished surface and maintains geometry during storage and transit — a practical advantage for mobile tooling carts and site use. Traceability and integration into production workflows The gauge pin is supplied as an individually identified item (SKU M323.H28, GTIN 4061905072055), which supports straightforward inventory control and traceability in production environments. Its clear specification and consistent dimensions make it suitable for routine go/no‑go checks, end‑measure verifications and for establishing quick master references when setting up jigs or aligning spindles. The combination of defined tolerance and workshop readiness streamlines quality assurance and reduces downtime during setup. Secure workshop precision with the Metav IndustryLine gauge pin — contact Metav Werkzeuge for delivery details and application guidance. Technical data SKU: M323.H28 GTIN: 4061905072055 Type: Gauge pin, single Length: 50 mm Diameter: 17.28 mm Material: Special steel Tolerance: ±0.002 mm Weight: 0.15 kg Version: Workshop execution Packaging: Delivered in transport box Facts 50 mm 17.28 mm ±0.002 mm 0.15 kg Special features Workshop version Protective transport box included High‑grade special steel Single item supply (individual gauge pin) FAQ What is the dimensional tolerance of this gauge pin? The gauge pin is manufactured to a tolerance of ±0.002 mm, ensuring reliable repeatability for reference and go/no‑go checks. Which material is used for the pin? The pin is made from special steel, selected for wear resistance and dimensional stability suitable for workshop use. Is the item delivered as a single piece or in a set? This listing is for a single gauge pin (SKU M323.H28) supplied individually. Can this pin be used for jig and fixture set‑up? Yes, the diameter and rigid construction make the pin suitable for use as a reference mandrel in jigs, fixtures and alignment tasks. How is the pin protected during transport? The pin is supplied in a protective transport box to preserve surface quality and geometry during storage and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.29mm Gauge Pin 50mm Length Workshop Version, Special Steel – Metav IndustryLine
Combine workshop‑grade robustness with laboratory‑level repeatability: a 17.29 mm diameter gauge pin with ±0.002 mm tolerance and a 50 mm length ensures reliable end‑dimension checks; order directly via Metav Werkzeuge or request advice from our consultants. Gauge pin M323.H29 — 17.29 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.H29 is a single inspection pin engineered for precise end‑dimension verification in workshop environments. Workshop‑grade construction Diameter 17.29 mm nominal Length 50 mm for end measurements Tolerance ±0.002 mm for tight control Precision for small‑scale end measurements The gauge pin is designed for demanding end‑dimension tasks where repeatable contact points matter. With a nominal diameter of 17.29 mm and a verified tolerance of ±0.002 mm, this pin belongs in the micro measurement class (10–100 mm), which is tailored for fine mechanical work and short‑reach checks. The tight tolerance reduces uncertainty in go/no‑go checks and datum setting, enabling faster decision‑making on the shop floor and fewer rejected parts during final inspection. Built‑to‑last material and workshop suitability Manufactured from special steel and supplied in a workshop configuration, the pin balances wear resistance with manageable handling. The 50 mm length gives enough reach for many end‑face and through‑hole verifications while keeping bending and handling simple; the compact form factor supports single‑handed positioning and repeatable contact pressure. The construction reduces maintenance needs and supports a dependable measurement routine without frequent replacement. Practical integration and supply reliability As a single‑item gauge pin, the component integrates easily into existing gauging sets and fixture layouts; traceable identifiers (SKU M323.H29, GTIN 4061905072574) simplify inventory and quality records. The combination of nominal size, precise tolerance and workshop design delivers a pragmatic balance between measurement accuracy and operational efficiency. Metav’s supply chain ensures consistent availability and straightforward procurement for production and quality teams. For precise end‑dimension checks using Metav IndustryLine gauge pins, contact Metav Werkzeuge for product matching and delivery from Emmerich—expert advice is available if additional technical data is required. Technical data Article number: M323.H29 GTIN: 4061905072574 Manufacturer: Metav IndustryLine Weight: 0.15 kg Facts Diameter: 17.29 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Single gauge pin, workshop version Material: special steel Category: gauge pins Story trigger: end dimensions FAQ What tolerance does the pin provide? The gauge pin offers a tolerance of ±0.002 mm, making the M323.H29 suitable for tight end‑dimension checks. Which measurement class does this pin belong to? With a nominal diameter of 17.29 mm it falls into the micro measurement class (10–100 mm), optimised for fine mechanical and small‑part applications. What material is used for the pin? The pin is made from special steel in a workshop configuration to combine durability with practical handling. Can the pin be used in fixture or gauge sets? Yes; the M323.H29 is a single inspection pin intended for integration into existing gauging arrangements and fixture checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.2mm Gauge Pin, Workshop Version, 50mm Length, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of workshop-grade robustness and sub-millimetre accuracy to secure repeatable gauge results; the combination of special steel construction, tight ±0.002 mm tolerance and compact form supports efficient in-process checks and reduces rework. Order the item directly via Metav Werkzeuge or consult our specialists for specification advice. Test pin, single, Ø 17.2 mm, 50 mm length — Metav IndustryLine The Test pin, single, Ø 17.2 mm, 50 mm length is a compact precision gauge pin designed for workshop control tasks and end-measure checks, providing a reliable reference for plug gauges and component verification. Workshop-grade execution Special steel construction Dimensional tolerance ±0.002 mm Supplied in transport case Consistent precision for routine inspection The compact measuring pin delivers repeatable results where short, rigid gauges are required. Manufactured from special steel, this probe maintains geometric stability during handling and is intended for tasks such as end-measure verification and reference fitting. The declared accuracy of ±0.002 mm positions the pin for fine workshop gauging where small tolerances must be upheld; this improves process reliability and reduces the need for corrective rework. As a small-size gauge within the micro range (max. measuring span 10–100 mm), its short form factor keeps deflection minimal, which is especially valuable on small bores and tight fittings. Built for everyday workshop use The workshop version construction focuses on durability and ease of use. A solid, compact design facilitates rapid checking routines on the shop floor and integrates readily with manual fixtures or portable checking rigs. The 50 mm length and Ø 17.2 mm diameter provide a stable contact area while keeping handling straightforward during repetitive measurements. Owing to its material choice and workshop finish, the pin resists wear under normal inspection duties and preserves calibration intervals, supporting consistent metrology practice in busy production environments. Packaging and traceability that suit industry routines Delivered in a transport case, the pin benefits from protected handling and straightforward storage between uses; the box is intended to prevent transit damage and to simplify workshop logistics. Traceability is supported by labelling and the visible SKU, enabling inventory control and replacement planning. Such practical packaging reduces downtime from damaged gauges and helps maintain a tidy inspection station, which contributes to steady throughput and more predictable quality checks. Typical applications and operational fit This measuring pin suits plug gauge verification, end-measure control, assembly checking and component acceptance tests where compact, stiff measuring elements are advantageous. Its tolerance class makes it suitable for fine mechanical parts and precision assemblies often encountered in general engineering and small-series production. Where short-range accuracy and robustness are required, the pin serves as a pragmatic reference element that complements bench instruments and hand gauging tools. For Metav IndustryLine quality and workshop-ready precision, request the M323.H20 gauge pin from Metav Werkzeuge — contact our Emmerich team for tailored ordering and application guidance. Technical Data Article number: M323.H20 GTIN: 4061905071485 Weight: 0.15 kg Facts Length: 50 mm Diameter: 17.2 mm Tolerance: ±0.002 mm Material: Special steel Special features Workshop version Supplied in transport case for transport Compact, rigid geometry SKU: M323.H20 FAQ What is the intended use of this gauge pin? The test pin is intended for workshop inspection tasks such as end-measure checks, plug gauge verification and small-component dimensional control. Which material is the pin made from and why does it matter? The pin is made from special steel; this material provides wear resistance and dimensional stability for repeated use under typical workshop conditions. How precise is the measuring element? The measuring element is specified with an accuracy of ±0.002 mm, suitable for fine inspection tasks where tight tolerances are required. Is the item supplied ready for safe transport and storage? Yes, the gauge pin is supplied in a transport case to protect the part during transit and simplify workshop storage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.31mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise end‑dimension control with a workshop‑grade gauge pin that combines ±0.002 mm accuracy, a 17.31 mm diameter and robust special‑steel construction for dependable routine inspection. Supplied ready for transport in a protective case, the item ensures reproducible measurements and simple handling on the shop floor — order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.H31 – single gauge pin, 17.31 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.H31 is a workshop‑grade inspection pin designed for precise end‑dimension checks and repeatable pass/fail verification in production and quality control. Workshop‑grade finish for robust use Diameter 17.31 mm, tolerance ±0.002 mm Length 50 mm, stable handling Supplied in transport case Precision for reliable end‑dimension checks The M323.H31 delivers high repeatability for routine verification tasks thanks to its guaranteed ±0.002 mm accuracy. As a single‑piece inspection pin with a nominal diameter of 17.31 mm, it provides a clear go/no‑go reference for bores and seats, reducing decision time during quality control. The finely finished measuring surface minimises measurement scatter and supports reproducible readings when used with standard gauge fixtures or manual checking rigs. Built for workshop durability and easy handling Manufactured from special steel, this gauge pin is specified for everyday industrial use and resists wear from repeated insertion cycles. At a length of 50 mm the pin offers a comfortable working grip while maintaining the necessary rigidity for end‑dimension checks; its mass of 0.15 kg aids stable handling without excessive bulk. The workshop‑oriented design balances robustness with manoeuvrability, making the item suitable for inspection benches and portable testing setups alike. Integrates smoothly into quality workflows The pin is classified as a micro‑range inspection tool due to its measuring diameter falling within the compact class typically used for fine mechanical parts; this makes it ideal for small components, precision assemblies and end‑dimension controls in serial production. Supplied in a protective transport case, the pin stays protected in transit and on the shop floor, which helps preserve measurement integrity and reduces downtime caused by surface damage. Practical application and compatibility Intended primarily for end‑dimension verification, the gauge pin functions well as a calibration reference within fixture checks and manual gauging sequences. Its nominal sizing and tolerance make it compatible with common inspection routines and existing checking equipment, enabling quick integration into established quality procedures with minimal adaptation. The robust finish simplifies cleaning and maintenance, supporting long service intervals under normal workshop conditions. For reliable shop‑floor inspections choose the Metav IndustryLine M323.H31 gauge pin — contact Metav Werkzeuge for tailored advice or ordering from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: M323.H31 GTIN: 4061905072598 Brand: Metav IndustryLine Facts Measuring diameter: 17.31 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Supplied in transport case Category: gauge pin FAQ What is the intended use of this gauge pin? The gauge pin M323.H31 is intended for end‑dimension checks and pass/fail verification of bores and seats in production or inspection settings. Does the pin come protected for transport? Yes — the M323.H31 is supplied in a protective transport case to prevent handling damage and to maintain measuring surface condition. What level of accuracy can be expected from the pin? The pin is specified with an accuracy of ±0.002 mm, suited for fine mechanical inspection and consistent routine checks. Which material is used for the pin? The inspection pin is made from special steel, selected for wear resistance and stable surface finish under repeated use. Is the M323.H31 suitable for small precision components? Yes; with a diameter of 17.31 mm and compact length, the pin is classified for micro‑range inspection tasks and integrates well into small‑part quality workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.32mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precise dimensional control and robust workshop construction: the combination of high repeatability, tight ±0.002 mm tolerance and a compact 50 mm length keeps inspection and fixture checks efficient and reproducible. Order the gauge pin directly via Metav Werkzeuge or consult their technical advisors for application guidance. Gauge Pin M323.H32 — single precision gauge pin, Ø 17.32 mm, 50 mm length (Metav IndustryLine) The Gauge Pin M323.H32 is a workshop-grade cylindrical reference pin designed for precise end-measure checks, fixture set-up and go/no-go verification in inspection and production environments. Workshop-grade execution Diameter Ø 17.32 mm, length 50 mm High precision ±0.002 mm tolerance Special steel construction Repeatable measurement performance for inspection and setup Precision inspection demands stable references. The Gauge Pin M323.H32 provides a defined cylindrical datum with Ø 17.32 mm and a working length of 50 mm, supplying a compact reference that minimises deformation and handling error during repeated use. With a declared accuracy of ±0.002 mm, the pin supports tight tolerance checks and helps maintain traceable control over end measures. The predictable geometry is particularly useful for quick go/no-go comparisons, plug-in tests and as a transfer standard in toolrooms and small-batch production, where consistent outcomes reduce rework and inspection time. Robust workshop construction that endures daily use Built from special steel, this single gauge pin is engineered for regular handling in workshop conditions. The material choice delivers dimensional stability under typical mechanical stress and contributes to a consistent contact surface for gauging operations. At approximately 0.15 kg, the component balances sturdiness with manageable handling for technicians during fixture assembly or manual inspection routines. The workshop execution emphasizes reliability and ease of use so that the pin resists routine wear while preserving the repeatability expected from a precision reference in a busy production environment. Practical integration into inspection workflows A compact cylindrical reference such as this aids rapid alignment and verification across jigs, fixtures and inspection benches. The single-pin format simplifies inventory and selection for dedicated measurement tasks, and the clear specification streamlines documentation for quality records. The combination of defined diameter, short length and tight tolerance makes the component suitable for end-measure validation, pin-fit testing and as a quick reference in set-up protocols. Using a standardised, well-documented reference reduces ambiguity in inspection reports and supports consistent production decisions across shifts. Contact Metav Werkzeuge for application advice and to order the Metav IndustryLine Gauge Pin M323.H32; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance Technical data SKU: M323.H32 GTIN: 4061905072604 Label: Prüfstift, einzeln, 17,32 mm Länge 50 mm Category: Messstifte Facts Diameter: 17.32 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop execution Single gauge pin format FAQ What tolerance does the pin offer? The Gauge Pin M323.H32 is specified with a tolerance of ±0.002 mm, suitable for tight workshop inspection and repeatable reference tasks. Is the pin made of a corrosion-resistant alloy? The pin is manufactured from special steel chosen for dimensional stability and workshop durability; surface treatment details are not specified in the item data. Can this pin be used for fixture set-up and plug-fit checks? Yes, the single cylindrical format and compact 50 mm length make the pin well suited for fixture alignment, plug-fit testing and quick go/no-go checks. Is the item supplied individually or as a set? The product is offered as a single gauge pin in the specified size and is listed under SKU M323.H32 and GTIN 4061905072604. For which applications is this gauge pin primarily intended? The component is intended for end-measure verification, inspection bench referencing and fixture set-up in machine shops, toolrooms and production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.33mm Gauge Pin, 50mm Length, Workshop Version, Special Steel, Delivered in Case - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, ±0.002 mm tolerance and a compact 50 mm form for reliable in‑process gauging. Order directly via Metav Werkzeuge or consult our specialists for integration advice. Test pin, single, 17.33 mm (Length 50 mm) — Workshop test pin with ±0.002 mm accuracy (Metav IndustryLine) A Test pin, single, 17.33 mm (Length 50 mm) intended for workshop gauging and end‑measure inspections of mating bores and fittings. Workshop design for robust routine use Tolerance ±0.002 mm for high repeatability Special-steel construction for wear resistance Compact 50 mm length for confined spaces Precision that speeds up inspection cycles The compact Test pin delivers a high level of metrological performance thanks to its ±0.002 mm specification, which supports consistent comparative checks and pass/fail decisions at the production line. The tight tolerance reduces rework by providing clear, repeatable results; when used as a reference pin in go/no‑go fixtures or manual gauging jigs, the reduced uncertainty translates directly into fewer false rejects and faster throughput. The robust workshop layout keeps handling simple and shortens the time from measurement to decision. Small package, big application range With a nominal diameter of 17.33 mm and an overall 50 mm length, the component is designed for confined assemblies and fixture stations where accessibility is limited. The pin’s compact geometry makes it easy to fit into close‑tolerance bores, plug gauges and alignment checks without requiring special adapters. At a weight of 0.15 kg the item is simple to position by hand or to clamp into standard holding devices, supporting quick repeat measurements and efficient shop‑floor workflows. Durable construction for everyday reliability Manufactured from special steel, the pin resists wear in frequent inspection use and maintains form integrity across many cycles. The workshop design focuses on practical handling: straightforward mounting, robust seating and minimal risk of deformation under routine contact. These properties ensure sustained repeatability and a long service life, lowering replacement frequency and supporting a dependable quality assurance routine in small and medium production environments. Contact Metav Werkzeuge for bespoke advice on integrating this Metav IndustryLine test pin into inspection jigs and to confirm availability from our Emmerich stock. Technical data SKU: M323.H33 GTIN: 4061905072611 Label: Test pin, single, 17.33 mm length 50 mm Material: Special steel Length: 50 mm Nominal diameter: 17.33 mm Tolerance: ±0.002 mm Weight: 0.15 kg Design: Workshop execution Category: Gauging pins / Messstifte Facts Measurement nominal: 17.33 mm Length nominal: 50 mm Mass: 0.15 kg Accuracy class: ±0.002 mm Single piece supply Special features Robust workshop design High wear resistance due to special-steel material Compact geometry for confined spaces FAQ What level of accuracy does this test pin provide? The Metav IndustryLine test pin M323.H33 is specified to ±0.002 mm, providing high repeatability for comparative gauging and go/no‑go checks. Is the pin suitable for use in manual gauging jigs and fixtures? Yes — the compact 50 mm length and 17.33 mm nominal diameter make the pin well suited to manual jigs, plug gauges and fixture stations in workshop environments. What is the material and how does it affect longevity? The component is made from special steel, chosen for wear resistance and form stability to ensure prolonged service life under routine inspection use. Can the pin be used for alignment checks on assemblies? The robust workshop design and precise nominal diameter allow reliable alignment and end‑measure checks on mating parts and assemblies. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.34mm Gauge Pin Length 50mm Workshop Finish, ±0.002mm - Metav IndustryLine
Benefit from workshop-grade construction, special steel and ±0.002 mm tolerance for consistent, repeatable checks in production. Combine precise diameter control and a compact 50 mm length for easy fixture access; order the gauge pin directly via Metav Werkzeuge or consult our advisors for specification guidance. Gauge pin, single — Ø 17.34 mm, length 50 mm (Metav IndustryLine) The gauge pin, single, 17.34 mm, length 50 mm is a workshop-grade verification pin intended for end‑dimension checks and fit verification in production, assembly and inspection tasks. Workshop-grade construction Diameter 17.34 mm precision fit Length 50 mm for fixture access Supplied in transport case Durable tool for routine verification with measurable benefits The compact verification pin delivers repeatable dimensional control where small deviations matter. Machined from special steel, the pin resists wear and maintains contact geometry during repeated use; this ensures that run-to-run checks remain consistent and that fixture alignments do not drift. The declared tolerance of ±0.002 mm classifies the component for fine verification tasks in workshop environments, supporting quick go/no-go decisions and reducing rework rates by identifying out-of-spec parts early in the process. Space-efficient design for tight fixtures and assemblies With a 50 mm overall length and a diameter of 17.34 mm, this test pin is designed to access recessed bores, gauge blocks and assembly seats without interfering with surrounding features. The short, rigid profile minimises bending and ensures stable seating during measurement or fitting operations; this makes it suitable for both handheld checks and use in simple fixture setups. The moderate mass and compact form factor also simplify handling during repetitive checks on production lines. Practical supply and traceability for production use Delivered as a single item in a protective transport case, the component is ready for immediate use on the shop floor and protected during storage and transit. Marked with SKU M323.H34 and GTIN 4061905072628, the part integrates into inventory systems and quality records with minimal administrative overhead. The workshop specification and robust material selection contribute to predictable service life, enabling scheduled replacement intervals rather than unscheduled downtime. For reliable workshop verification with Metav IndustryLine quality, contact Metav Werkzeuge to discuss M323.H34 availability and application advice. Technical data Article number: M323.H34 GTIN: 4061905072628 Manufacturer: Metav IndustryLine Diameter: 17.34 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Workshop execution Material: Special steel Supplied in transport case Single gauge pin FAQ What tolerance does the gauge pin offer? The gauge pin is specified with a tolerance of ±0.002 mm, suitable for fine workshop verification and fit checks of mating parts. What material is used for the pin? The pin is manufactured from special steel, chosen for wear resistance and dimensional stability under repeated use. Is the pin supplied ready for use and how is it packaged? The single gauge pin M323.H34 is supplied in a transport case to protect the part during storage and transit and to facilitate safe handling. Which applications suit this gauge pin best? The component is intended for end-dimension checks, fit verification and fixture testing in production and assembly contexts where compact, rigid gauges are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.35mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
The 17.35 mm diameter and 50 mm length deliver consistent micro‑diameter inspection with ±0.002 mm accuracy, combining repeatability and shop‑floor robustness for reliable Go/No‑Go checks. Order the inspection pin directly via Metav Werkzeuge or contact our consultants for technical advice. Test pin M323.H35 – Precision inspection pin, Ø17.35 mm × 50 mm (Metav IndustryLine) The Test pin M323.H35 is a single inspection pin designed for accurate dimensional checking of small bores and gauge assemblies in workshop environments. Diameter 17.35 mm for precise bore checks Length 50 mm, robust workshop execution Tolerance ±0.002 mm for high repeatability Micro‑diameter accuracy that fits compact workpieces The M323.H35 is built for micro‑diameter inspection tasks where compactness and stability matter. With a nominal Ø17.35 mm and a 50 mm overall length, the pin falls squarely into the micro category (max. range 10–100 mm), which is the preferred class for fine mechanical components and small assemblies. The short shank geometry reduces torsion and handling errors, enabling reproducible Go/No‑Go checks and quick verification of end dimensions. The ±0.002 mm stated positional accuracy positions this pin beyond coarse shop tolerances and closer to high‑precision workshop demands, ensuring reliable pass/fail decisions without lengthy setups. Workshop execution for everyday durability and handling Designed as a workshop execution item, this inspection pin balances resilience with tactile usability. Manufactured from special steel, the component resists routine knocks and maintains the measuring face geometry under regular shop use. The compact mass and ergonomic proportions make fitting into fixtures and gauge blocks straightforward while reducing the risk of deformation during handling. These attributes translate into fewer measurement interruptions and a lower rate of rework; the physical design emphasises practical longevity rather than delicate laboratory handling, which suits busy production floors and tooling departments. Integrates into inspection workflows to boost throughput As a straightforward inspection artefact, the M323.H35 speeds up quality control cycles by providing a stable reference for quick checks at incoming inspection stations or final assembly. The combination of a defined diameter, controlled length and tight tolerance minimises uncertainty in decision chains, allowing quality teams to act fast and with confidence. Using robust, repeatable gauges reduces stoppages caused by ambiguous measurements and supports leaner throughput. Metav’s focus on democratising precision means the component is offered with clear sourcing and logistical support from Emmerich, simplifying procurement and ensuring dependable replenishment for production environments. Choose the Metav IndustryLine test pin for precise micro‑diameter verification—contact Metav Werkzeuge in Emmerich for specification clarification and ordering support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.H35 GTIN: 4061905069536 Material: Special steel Weight: 0.15 kg Facts Diameter (nominal): 17.35 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Category: Test pin, single Special features Workshop execution Compact geometry for micro‑diameter inspection Robust design for routine shop use FAQ What is the intended application of this test pin? The M323.H35 inspection pin is intended for quick dimensional checks of small bores and gauge assemblies where a precise reference pin is required. Is the M323.H35 suitable for laboratory calibration tasks? The M323.H35 is specified for workshop use and routine inspection; its ±0.002 mm tolerance supports high repeatability on the shop floor rather than specialised metrology lab applications. Which material is used for the pin and how does it affect durability? The pin is made from special steel, chosen to provide resistance to wear and mechanical stress typical in daily workshop handling. Can the pin be used in gauge blocks and fixture assemblies? Yes, the compact Ø17.35 mm and 50 mm length make the pin compatible with many gauge and fixture configurations designed for micro‑diameter verification. How does the specified accuracy compare to common workshop tools? With a tolerance of ±0.002 mm, the pin offers greater precision than coarse workshop standards and approaches the needs of high‑precision inspection routines. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.36mm Test Pin 50mm Length Workshop Version Special Steel - Metav IndustryLine
Take advantage of high repeatability, robust workshop design and a compact form factor to simplify end‑limit checks and keep inspection routines efficient; order the gauge pin directly via Metav Werkzeuge or consult our advisors for application support. Gauge pin M323.H36 — precision test pin, 17.36 mm Ø, 50 mm length (Metav IndustryLine) The Gauge pin M323.H36 serves as a compact reference pin for end‑measure checks and go/no‑go verification in workshop inspection and small‑series quality control. Workshop version for robust daily use Diameter precisely 17.36 mm ±0.002 Length 50 mm in special steel construction Supplied in protective transport case Consistent measurement where it matters A compact precision pin designed for repeatable end‑measure checks, the gauge pin offers a diameter of 17.36 mm with a declared tolerance of ±0.002 mm, which translates into reliable go/no‑go decisions during routine inspection. The tight tolerance reduces ambiguity in acceptance criteria and shortens decision loops on production lines. The specified variance corresponds to high‑precision workshop checks and supports traceable dimensional control when used as a reference in go/no‑go fixtures or manual gauge benches. Built for workshop handling and protection Specified as a workshop version, this test pin is manufactured from special steel to withstand everyday handling and contact with gauge holders. Its 50 mm length balances reach with ease of manipulation, and the supplied protective case ensures secure transport and storage between uses. The robust construction reduces the risk of deformation and helps maintain the declared tolerance over repeated cycles, thereby lowering the need for frequent replacement and keeping maintenance predictable. Seamless integration into inspection routines Engineered for straightforward use in small‑series production and maintenance shops, the pin slips easily into existing checking jigs and manual fixtures. The compact form factor supports fast sampling and quick pass/fail evaluations, helping to maintain throughput without sacrificing control. Alongside its mechanical stability, the clear specification and stock availability from a European quality filter support procurement decisions and minimise lead times for repeat orders. Request the Metav IndustryLine gauge pin from Metav Werkzeuge for reliable end‑measure control and immediate integration into workshop inspection processes; contact Metav Werkzeuge by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for technical advice or to confirm availability. Technical data Article number: M323.H36 GTIN: 4061905069543 Category: Messstifte Length: 50 mm Nominal diameter: 17.36 mm Accuracy: ±0.002 mm Weight: 0.15 kg Material: Special steel Workshop execution Supplied in protective transport case Single gauge pin FAQ What tolerances can be expected from this gauge pin? The gauge pin is specified with an accuracy of ±0.002 mm, making the M323.H36 suitable for tight workshop inspection and clear go/no‑go assessment. Which material is used for the pin and what does that mean for durability? Manufactured from special steel, the pin offers resistance to routine wear in workshop environments; regular handling in the supplied protective case maintains dimensional integrity. Can the pin be used in existing gauge holders and jigs? Yes, the 17.36 mm nominal diameter and 50 mm length are compatible with standard manual fixtures and gauge benches used for end‑measure verification. Is this item supplied ready for storage and transport? Delivery includes a protective transport case, which protects the pin during storage and movement between inspection stations. What is the product identifier for ordering and traceability? The product is listed as Gauge pin M323.H36 (SKU M323.H36, GTIN 4061905069543) in the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.37mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Reliable workshop‑grade precision for end‑size checks: the gauge pin offers a diameter of 17.37 mm with a manufacturing tolerance of ±0.002 mm and a 50 mm shaft made from special steel, ensuring repeatable results in fixture setup and inspection. Order the component directly via Metav Werkzeuge or consult our specialists if specification advice is needed. Gauge pin (17.37 mm), 50 mm length — Metav IndustryLine A precision gauge pin designed for end‑size inspection and fixture alignment in demanding workshop environments Workshop-grade design for rugged use Diameter exactly 17.37 mm precision ±0.002 50 mm special-steel shaft Ideal for end-size inspection and fixture set-up Precision that reduces rework and inspection time The 17.37 mm gauge pin is manufactured to a tight tolerance of ±0.002 mm, enabling reliable go/no‑go assessments and dimensional checks on finished parts. High repeatability during iterative checks helps to reduce scrap and rework by catching deviations early in the production flow. The precision of the component supports process control routines and contributes to a consistent quality record in batch inspection and small‑series production. Robust material and compact form for workshop use Constructed from special steel, the shaft combines stiffness with wear resistance appropriate for regular use on shop floors. The 50 mm overall length provides a stable engagement depth for many fixturing operations while remaining easy to handle during manual checks. The workshop version designation indicates a design balanced between durability and economical manufacture, making it suitable for routine inspection tasks and integration into assembly jigs. Practical deployment in quality routines and fixtures As a compact inspection element, the gauge pin simplifies end‑size verification, alignment of locating features and validation of bore diameters where a fixed reference mandrel is required. Its modest mass and precise diameter permit quick insertion and withdrawal without special tools, accelerating operator workflows. For traceability and inventory management the component is listed as M323.H37, supporting clear identification in tool lists and inspection reports. For specification advice or to secure the Metav IndustryLine gauge pin (M323.H37) for workshop inspection tasks, contact Metav Werkzeuge to arrange purchase details or technical clarification via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.H37 GTIN: 4061905069550 Brand: Metav IndustryLine Core specifications Diameter: 17.37 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Materials & features Material: Special steel Workshop version Accuracy class: ±0.002 FAQ What is the primary use for this gauge pin? The gauge pin (Metav IndustryLine M323.H37) is intended for end‑size inspection, locating and fixture alignment tasks where a precise reference diameter is required. What tolerance does the component provide? The component is manufactured to a tolerance of ±0.002 mm, enabling high‑precision go/no‑go verification and dimensional checks. What is the material and build quality of the pin? Made from special steel, the pin is produced as a workshop version designed for regular use and stable handling during inspection and fixturing. Is the diameter exactly 17.37 mm? Yes, the nominal diameter is 17.37 mm, with the stated tolerance of ±0.002 mm governing permissible deviation. How can the part be identified in documentation? The component is listed under article number M323.H37 and GTIN 4061905069550 for unambiguous identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.38mm Test Probe 50mm Length Workshop Version - Metav IndustryLine
Benefit from the combination of workshop-grade robustness, a ±0.002 mm tolerance and a 50 mm length for consistent end‑measure results. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, 17.38 mm — 50 mm length | Metav IndustryLine The gauge pin, single, 17.38 mm is a hardened inspection pin designed for precise end‑measure checks and plug gauging in workshop metrology. Precision ±0.002 mm tolerance Nominal diameter 17.38 mm Length 50 mm workshop version Special steel hardened construction Repeatable results for everyday workshop control This inspection pin delivers a reliable metrological reference for repetitive end‑measure tasks. With a ±0.002 mm runout specification, the pin stabilises measurement variance and supports consistent pass/fail decisions on small components. The compact 50 mm shank and fine nominal diameter make it suitable for plug‑gauge comparisons and fit tests where small deviations influence assembly quality. The robust design reduces the need for frequent rework and thus contributes to smoother production flow. Hardened material and construction that withstands daily use Manufactured from special steel and supplied as a workshop configuration, the pin balances durability with dimensional integrity. The choice of material and heat treatment ensures long wear life under typical inspection cycles while preserving the calibrated geometry essential for accurate gauging. The construction minimises surface wear and keeps the gauge geometry stable over repeated insertions, supporting reduced downtime and predictable inspection intervals. Practical fitment and straightforward integration into quality routines The nominal 17.38 mm diameter and 50 mm length allow straightforward incorporation into existing gauge sets or dedicated checking fixtures. Its compact form factor is compatible with handheld gauge holders and bench fixtures, enabling simple alignment and rapid checks without complex fixturing. When used as part of a standard control plan, the pin gives clear, measurable results that feed directly into process control charts or inspection records, aiding traceability and quicker corrective actions. Contact Metav Werkzeuge today to specify the M323.H38 gauge pin for workshop use and to arrange delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 for precise guidance. Technical data SKU: M323.H38 GTIN: 4061905069567 Manufacturer: Metav IndustryLine ECLASS: 21170231 Facts Diameter: 17.38 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: special steel Workshop version Category: gauge pins Article label: Gauge pin, single, 17.38 mm length 50 mm FAQ What applications suit this gauge pin best? This gauge pin is intended for plug gauging, end‑measure checks and small‑part fit tests; the M323.H38 from Metav IndustryLine is optimised for routine workshop inspection tasks. What is the declared tolerance and how does it affect measurements? The pin carries a tolerance of ±0.002 mm, which ensures tight repeatability for dimensional checks and helps reduce measurement uncertainty during frequent conformance testing. Which material is used and what does that mean for durability? The gauge pin is made from special steel, giving the M323.H38 good wear resistance and dimensional stability under normal inspection cycles. Can the pin be used in bench fixtures or handheld holders? Yes, the 50 mm length and compact profile make the pin suitable for both handheld gauge holders and common bench fixtures without additional modification. Is the product compatible with standard gauge sets? The nominal diameter and standard form factor allow easy integration into existing gauge sets and checking routines, aiding straightforward replacement or extension of current equipment. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.39mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precision, robust workshop design and repeatable end‑size verification with this inspection component; the combination of ±0.002 mm accuracy, 17.39 mm diameter and durable special steel makes it a reliable choice for quality control. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin 17.39 mm Ø, 50 mm length (Metav IndustryLine) A gauge pin 17.39 mm engineered for precise end‑size checks and plug‑in verification in metrology and workshop inspection. Workshop version, robust design Diameter 17.39 mm for end‑size checks Length 50 mm for standard fixtures Tolerance ±0.002 mm for tight measurements Repeatable end‑size verification for routine quality control The gauge pin provides a straightforward, measurable reference for end‑size and plug checks, combining a 17.39 mm diameter with a 50 mm length to suit common fixture depths. Constructed from special steel, the pin resists deformation under frequent use and maintains dimensional stability, which supports consistent results during repetitive inspections. The declared ±0.002 mm tolerance signals suitability for tasks that demand close control, such as final component verification and assembly checks, reducing uncertainty in go/no‑go decisions. Robust workshop construction that endures handling Designed as a workshop version, the pin tolerates everyday handling without compromising accuracy. The compact mass of 0.15 kg and short, stable geometry aid quick positioning in gauges, minimising fixturing time and helping to keep inspection cycles efficient. Where repeatable seating and minimal lateral play are essential, the pin’s construction preserves alignment in jigs and plate fixtures, lowering the risk of measurement drift and enabling reliable throughput on the shop floor. Quick integration into gauges and inspection jigs The pin’s consistent diameter and straightness allow seamless insertion into standard gauge blocks, bushings and dedicated fixtures; this simplifies setup and speeds up batch checks. By converting a measured variable into a simple plug verification, the component contributes directly to a smoother production flow: fewer interruptions, faster acceptance checks and clearer decision thresholds for quality control. Clear numerical specifications make it easier to plan probe positions and define acceptance bands in inspection plans. Sourced to support precision across workshops and small series Backing the component is Metav’s practical approach to industrial supply: a focused range and dependable logistics from Emmerich that bring precise measuring aids within reach of workshops and small production lines. Choosing this gauge pin means relying on a supplier that emphasises accessibility to accurate tools and a pragmatic supply chain, helping maintain consistent quality without unnecessary complexity. Request tailored guidance from Metav Werkzeuge for correct selection and rapid delivery from Emmerich to the workshop. Technical Data Article number: M323.H39 GTIN: 4061905069574 SKU: M323.H39 Material: Special steel Accuracy: ±0.002 mm Diameter: 17.39 mm Length: 50 mm Weight: 0.15 kg Facts Diameter: 17.39 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm GTIN: 4061905069574 Special features Workshop version robust design Single inspection/gauge pin Suitable for end‑size and plug checks Special steel construction Compact geometry for fixtures FAQ What is the nominal diameter and length of this pin? The gauge pin has a nominal diameter of 17.39 mm and a length of 50 mm (SKU M323.H39). What accuracy can be expected for measurements with this pin? The inspection pin is specified with an accuracy of ±0.002 mm, suitable for tight tolerance verification. Which material is used for the pin? The pin is manufactured from special steel, chosen for dimensional stability and workshop durability. Is the product suitable for integration in standard jigs and bushings? Yes. The consistent diameter and straight geometry make the pin appropriate for use in standard gauges, bushings and bespoke inspection jigs. Who supplies this gauge pin and where is it shipped from? This component is part of the Metav IndustryLine range and supplied via Metav Werkzeuge with logistics centred in Emmerich. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.3mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of a combination of precision, robust workshop design and compact dimensions for consistent end-measurements; order the M323.H30 directly via Metav Werkzeuge or consult our specialists for application advice. Gauging pin M323.H30 — single inspection pin, Ø 17.3 mm, 50 mm length (Metav IndustryLine) The gauging pin M323.H30 is a compact, workshop-grade inspection pin designed for reliable end-dimension checks and fixture verification in production and inspection settings. Workshop version for robust use Diameter 17.3 mm for end-measurements High accuracy ±0.002 mm Durable design for repeated inspection cycles The M323.H30 is built as a workshop version, combining a compact form with material choices that resist everyday wear. The body is made from special steel, hardened and finished for stable contact behaviour and long service life. This construction reduces the need for frequent replacement, ensuring steady throughput in repetitive inspection tasks and minimising downtime caused by tool wear. Measurement certainty that supports quality control With a nominal diameter of 17.3 mm and a declared accuracy of ±0.002 mm, the pin provides a dependable reference for end-measurements and go/no-go checks. The tight tolerance supports quality assurance processes where repeatability is critical; for instance, it helps verify bores, seats and fixture positions to prevent assembly errors. The small, rigid geometry concentrates contact forces, improving reproducibility compared with larger, more flexible gauges. Compact handling and integration into inspection routines At 50 mm overall length and weighing approximately 0.15 kg, the pin is straightforward to handle and slot into standard test setups or bespoke fixtures. The single-piece format simplifies component management on the shop floor and speeds up measurement routines in busy inspection benches. Traceable identification is supported by the SKU and GTIN, facilitating inventory control and process documentation in manufacturing environments. For procurement or technical clarification about the M323.H30 gauging pin, contact Metav Werkzeuge in Emmerich for specialist advice and order guidance. Technical data SKU: M323.H30 GTIN: 4061905072581 Label: Prüfstift, einzeln, 17,3 mm Länge 50 mm Facts Diameter: 17.3 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Workshop version Material: special steel Single inspection/gauging pin Designed for end-measurements FAQ What is the primary application for this pin? The M323.H30 gauging pin is intended for end-dimension checks, fixture verification and go/no-go inspection of bores and seats in production and quality-control environments. What tolerance can be expected from the pin? The inspection pin is specified with an accuracy of ±0.002 mm, which makes it suitable for fine inspection tasks and repeatable reference measurements. Which material is the pin made from and why does it matter? Manufactured from special steel, the pin offers improved wear resistance and consistent contact behaviour, which preserves dimensional reliability over many inspection cycles. How does the size affect its use in fixtures? With a diameter of 17.3 mm and a length of 50 mm, the pin is compact enough for tight test stations yet rigid enough to provide reproducible readings when used in standard fixture arrangements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.41mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a compact workshop design combined with special steel construction and an accuracy of ±0.002 mm for reliable end‑measurement checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single – 17.41 mm Ø, 50 mm length (Metav IndustryLine) Gauge pin, single, 17.41 mm for precise end‑measure verification and fit checks in workshop and production metrology. Single gauge pin, workshop version Diameter 17.41 mm for precise fit checks Length 50 mm, stable handling Accuracy ±0.002 mm for repeatable results Consistent fit and assembly checks with measurable accuracy The compact test pin is engineered for repeatable dimensional control where end‑measure verification matters. With a nominal diameter of 17.41 mm and an indicated accuracy of ±0.002 mm, the device supports tight tolerance assessment in assembly and inspection routines. The small footprint and solid geometry reduce the influence of lateral play, so measurements remain consistent across repeated cycles; this converts technical specification into dependable shop‑floor performance. Robust material and workshop handling for daily use Built from special steel in a workshop design, the pin balances wear resistance with dimensional stability under regular handling. The 50 mm length offers a practical grip and insertion depth for standard fixture checks while keeping the component easy to manoeuvre. The construction is aimed at routine metrology tasks where a robust feel and low maintenance are important, translating material choice into longer service life and fewer replacements. Practical integration into quality workflows As a single gauge element, the pin functions as a reference for go/no‑go assessments, seating trials and clearance verification in production lines. Marking and handling are optimised for quick identification within kits; the simple geometry enables rapid comparison and fast decisions during inspection steps. The clear numerical tolerance specification supports traceable documentation and quality records, aligning technical capability with efficient process control. For repeatable end‑measure checks and workshop standards, request the Metav IndustryLine gauge pin (SKU M323.H41) from Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M323.H41 GTIN: 4061905069598 Description: single gauge pin, Ø 17.41 mm, length 50 mm Manufacturer: Metav IndustryLine Weight: 0.15 kg Facts Diameter: 17.41 mm Length: 50 mm Tolerance/accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Application: end‑measure checks and fit verification SKU: M323.H41 FAQ What tolerance can be expected from this gauge pin? The gauge pin is specified with an accuracy of ±0.002 mm, allowing the Metav IndustryLine single gauge pin (SKU M323.H41) to be used for precise fit and clearance checks. Is the pin suitable for use in assembly fixtures and seating tests? Yes, the 50 mm length and robust workshop design make the pin appropriate for seating trials, fixture trials and quick go/no‑go assessments in production environments. What material is the pin made from and what does that mean for wear? Constructed from special steel, the pin offers improved wear resistance and dimensional stability under normal workshop handling, supporting longer interval use before replacement. Can this pin be used as a reference for quality documentation? The clear nominal diameter and stated tolerance permit inclusion in inspection records and quality documentation as a repeatable reference element. How should the pin be handled to preserve accuracy? Handle the pin with care, avoid impact or bending forces and store it with other precision tools to prevent abrasion; these measures help maintain the specified ±0.002 mm accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.42mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of precision, robust workshop design and traceable identification to keep dimensional checks efficient and reproducible; the combination of ±0.002 mm tolerance, 17.42 mm nominal diameter and compact 50 mm length supports reliable end‑measure verification — request the part via Metav Werkzeuge or consult the technical team for application advice. Gauge Pin M323.H42 — 17.42 mm, 50 mm Length (Metav IndustryLine) Gauge Pin M323.H42 is a single precision gauge pin designed for end‑dimension verification in workshop inspection and fixture checks. Workshop-grade finish Diameter 17.42 mm for end-size checks Tolerance ±0.002 mm accuracy 50 mm special-steel construction Ensure reproducible size control on the production line High repeatability in dimensional inspection reduces rework and streamlines quality gates. The 17.42 mm nominal diameter combined with a declared ±0.002 mm tolerance provides a tight acceptance criterion that is suitable for close‑tolerance fits and final inspection. As a hardened inspection pin alternative, this type of gauge is used for quick pass/fail verification of bores, seats and end dimensions; calibrated master gauges and systematic use of a reference set raise overall measurement confidence. The compact form factor allows installation in gauges and fixtures where a stable reference is required without excess overhang. Durable workshop design for frequent handling Built in a workshop version finish from special steel, the pin is dimensionally stable and resistant to the knocks and handling typical in everyday inspection routines. The 50 mm length provides sufficient engagement for end‑measure checks while remaining easy to manipulate and mount in test fixtures. Low mass and compact geometry support fast tool changes and simple storage in dedicated holders. The construction focuses on robustness and serviceability rather than decorative finishes, making it a practical choice for maintenance, assembly and quality control stations. Integrates with inspection processes and traceability systems Marked with SKU M323.H42 and full GTIN identification, the pin can be recorded in inventory and inspection logs to support traceability. Its single‑piece configuration simplifies fixture design and reduces setup errors when verifying end dimensions during batch runs. Where serial documentation is required, this gauge can be referenced in inspection protocols and work instructions to ensure consistent acceptance criteria across shifts. For users needing confirmation of specification compliance, the clear numerical tolerance and nominal size make the component straightforward to incorporate into quality plans and measurement reports. For technical selection or to request the M323.H42 gauge pin from Metav IndustryLine, contact Metav Werkzeuge for specification guidance and delivery options at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our technical consultants are available to advise on integration into existing inspection routines. Technical data Article number: M323.H42 GTIN: 4061905069994 Label: Gauge pin, single, 17.42 mm, length 50 mm ECLASS: 21170231 Facts Diameter: 17.42 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: special steel Version: workshop execution Category: gauge pins SKU: M323.H42 FAQ What tolerance does the gauge pin provide? The M323.H42 gauge pin from Metav IndustryLine is specified with a tolerance of ±0.002 mm, making it suitable for tight end‑dimension verifications. For which inspection tasks is this pin intended? This single gauge pin is intended for end‑size and bore checks, seating verification and fixture reference tasks where a 17.42 mm nominal plug is required. What material and finish does the pin have? The pin is manufactured from special steel with a workshop execution finish designed for robust everyday handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.43mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise tolerance, robust workshop design and secure transport packaging to keep inspection workflows consistent; order the component directly via Metav Werkzeuge or ask our consultants for application support. Gauge pin, single Ø 17.43 mm, length 50 mm (Metav IndustryLine) The Gauge pin, single Ø 17.43 mm, length 50 mm serves as a compact workshop test pin for end‑dimension checks and plug‑gauge applications in inspection routines. Workshop-grade construction Special steel for wear resistance Dimensional tolerance ±0.002 mm Consistent measurement accuracy for routine inspections The pin is designed to deliver reliable precision where repeatable checks are required. With a nominal diameter of 17.43 mm and a verified tolerance of ±0.002 mm, the component supports tight control limits in production monitoring and manual inspection stations. Its defined tolerance reduces uncertainty during fit and clearance tests, enabling faster go/no‑go decisions and fewer follow‑up adjustments in the production chain. The measured stability of the test pin helps maintain documented quality levels and simplifies traceable inspection protocols. Robust workshop design that withstands daily use Built in a workshop execution and produced from special steel, the test pin resists wear and surface damage encountered in frequent handling. The hardened material and concise geometry optimise contact stability and reduce profile deformation under repeated insertion. Supplied as a single, ready‑to‑use pin, it integrates easily into fixtures, plug gauges or bespoke inspection jigs. A secure transport case is provided for safe storage and reduced risk of transit damage, helping to preserve the pin's calibrated condition during logistics and workshop routines. Practical integration into inspection workflows Lightweight and compact, the gauge pin simplifies handling and placement in assemblies where quick dimensional verification is required. Its consistent dimensions support quick verification of mating bores, stepped features and alignment aids without complex set‑ups. Documentation‑friendly identification (SKU and GTIN) assists in inventory control and replacement planning, while the straightforward design keeps maintenance and cleaning simple, supporting a high throughput of checks with minimal operator training. Contact Metav Werkzeuge in Emmerich for matching gauge solutions and consultation on how this Metav IndustryLine test pin fits existing inspection procedures — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.H43 GTIN: 4061905070006 Product: Gauge pin, single Facts Diameter: 17.43 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop execution Delivered in transport case Single test pin FAQ What nominal diameter does the gauge pin have? The Gauge pin, single Ø 17.43 mm, length 50 mm has a nominal diameter of 17.43 mm for end‑dimension verification. What tolerance is specified for this test pin? A dimensional tolerance of ±0.002 mm is specified for the pin, supporting fine acceptance criteria in inspection tasks. Which material is used for the pin? The pin is manufactured from special steel in a workshop execution to improve surface durability during frequent use. How is the pin supplied and stored? The gauge pin is supplied as a single item and is provided with a transport case to protect the component during transit and storage. For which applications is this pin suitable? The test pin is suitable for plug‑gauge checks, end‑dimension inspections, fixture validation and alignment tasks within standard workshop and production inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.44mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.002 mm repeatability, special steel construction and compact 50 mm length to secure reliable end‑measure references in the workshop; order the gauge pin directly via Metav Werkzeuge or consult our advisers for application advice. Gauge pin, single, 17.44 mm Ø, 50 mm length — Metav IndustryLine precision test pin The gauge pin, single, 17.44 mm diameter and 50 mm length is a workshop‑grade reference pin designed for end‑measure checks, fixture set‑up and quick interchange tests. Workshop‑grade design for daily use Diameter precisely 17.44 mm Tight tolerance ±0.002 mm Supplied in protective case Reliable reference for end‑measure checks The compact reference pin delivers repeatable measurements through a tight ±0.002 mm tolerance, making it suitable for final acceptance checks and quick go/no‑go verifications. A solid, dimensionally stable shaft of 17.44 mm diameter and a 50 mm overall length provides a consistent datum when setting up fixtures or verifying bore finishing. The measurable accuracy reduces rework and shortens inspection cycles by turning a complex verification into a straightforward mechanical reference. Built for workshop conditions with high durability Constructed from special steel, the pin resists everyday wear while maintaining form accuracy under typical workshop handling. The workshop‑grade finish balances hardness and surface quality to reduce the risk of marking mating components, while still offering robust service life. The compact length aids handling and storage, and the mass of 0.15 kg gives a reassuring feel during manual use without compromising portability. Simple integration and practical handling The single‑piece design enables straightforward use as a fixed reference in fixtures, a verification mandrel for bores or as a transfer standard for quick comparative measurements. Its clear nominal diameter and compact format make the pin compatible with common inspection setups and analogue gauges. The smooth shaft and precise ground geometry permit stable seating in bore checks and reduce wobble during gauging operations, improving repeatability of results between runs. Proven traceability for quality routines Marked and traceable identification supports organised inspection workflows. As a member of the Metav IndustryLine, the test pin is manufactured under controlled processes that prioritise dimensional stability and batch consistency. The combination of material choice and machining precision makes this item a dependable reference for workshop QC procedures and repeat checks where consistent end‑measure verification is required. For a reliable workshop reference, request the Metav IndustryLine gauge pin (SKU M323.H44) through Metav Werkzeuge; our consultants can advise on how this 17.44 mm reference pin matches existing inspection procedures. Technical data SKU: M323.H44 GTIN: 4061905070594 Label: Prüfstift, einzeln, 17,44 mm Länge 50 mm Dimensions & tolerances Diameter: 17.44 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Material & features Material: Special steel Workshop version Supplied individually Protective case for transport FAQ What is the usable length and diameter of the gauge pin? The gauge pin has a diameter of 17.44 mm and an overall length of 50 mm; the dimensions are intended for end‑measure and fixture referencing. What tolerance does the pin offer for precision checks? The reference pin is manufactured to a tolerance of ±0.002 mm, suitable for precise workshop verification and repeat checks. Is the material suited to regular workshop handling? Yes, the pin is made from special steel, providing a balance of hardness and durability for routine use in machining and inspection environments. Can the pin be used as a fixture datum or for bore checking? The single‑piece, ground shaft design permits stable seating in bores and use as a datum in fixture set‑ups, supporting consistent repeatability. Which SKU identifies this Metav IndustryLine test pin? This item is supplied as Metav IndustryLine SKU M323.H44 and is intended for workshop reference and end‑measure tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.45mm Gauge Pin Single 50mm Length Workshop Version, 0.002mm Accuracy - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, ±0.002 mm tolerance and a compact 50 mm working length for repeatable end‑measurements; the test pin arrives protected in a transport case. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin M323.H45 — Inspection pin, Ø 17.45 mm, 50 mm length (Metav IndustryLine) Test pin M323.H45 for precise end‑measurements and component checks in workshop and production environments. Workshop-grade construction Diameter 17.45 mm for end-measurements Tolerance ±0.002 mm for high repeatability Delivered in protective case Precise checks for repeatable results The M323.H45 is designed for high‑precision verification of external dimensions where minimal deviation matters. With a documented tolerance of ±0.002 mm, the pin provides a tight reference for go/no‑go checks and calibration routines, supporting consistent inspection results across batches. The compact 50 mm length and its defined Ø 17.45 mm profile make it particularly suitable for end‑measurements and plug‑gauging of small bores or mating parts, reducing uncertainty where tight fits are specified. This level of accuracy reduces rework and helps maintain quality targets in serial production. Durable workshop design that eases daily use Built in a workshop execution, the gauge pin combines a resilient special steel construction with a balanced weight for easy handling (approx. 0.15 kg). The surface finish and material choice ensure wear resistance in routine use while preserving dimensional stability. Supplied in a protective case for secure transport and storage, the component is ready for immediate integration into inspection trays or tool cabinets. The robust design reduces downtime for replacements and supports long service intervals in demanding shopfloor conditions. Integration into inspection workflows and suitability Classified in the micro range (measuring span 10–100 mm), this inspection pin fills the need for extremely compact, low‑deflection references used in fine mechanical and precision engineering tasks. The M323.H45 functions as a reliable end‑measure reference for gauge benches, fixture set‑ups and manual checks in toolrooms. Traceable identification (GTIN and SKU) facilitates inventory and quality documentation, while the simple geometry allows fast comparative checks without complex instrumentation. For tasks that require a repeatable mechanical standard rather than electronic sensing, this solid gauge provides clarity and speed in measurement routines. For production teams seeking a compact, high‑precision inspection standard, request the Metav IndustryLine test pin M323.H45 via Metav Werkzeuge; our specialists in Emmerich are available to advise on integration into existing quality processes. Technical Data Article number: M323.H45 GTIN: 4061905070600 Manufacturer: Metav IndustryLine Facts Length: 50 mm Diameter (measuring range): 17.45 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop execution Delivered in protective case Category: Messstifte SKU: M323.H45 FAQ What is the intended application for this inspection pin? The test pin M323.H45 is intended for end‑measurement checks and comparative verification of small bores and mating parts in workshop and production settings. How precise is the M323.H45 for routine checks? The inspection pin is specified with a tolerance of ±0.002 mm, making it suitable for high‑accuracy comparative and go/no‑go checks. What material is used and how does that affect durability? Manufactured from special steel, the M323.H45 offers enhanced wear resistance and dimensional stability under normal workshop use. Is the test pin supplied ready for use and how is it packaged? The M323.H45 is delivered in a protective transport case, enabling immediate use and secure storage. Can the pin be integrated into existing fixture or gauge sets? Yes; the compact geometry and defined Ø 17.45 mm profile allow straightforward integration into fixture setups and manual gauge benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.46mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of pinpoint accuracy, robust workshop design and compact dimensions for reliable in‑process inspection. The single test pin offers ±0.002 mm repeatability in a Ø 17.46 mm gauge body and a 50 mm shank for easy handling — order via Metav Werkzeuge or consult our specialists for application advice. Single test pin — Ø 17.46 mm / 50 mm length (Metav IndustryLine) The Single Test Pin, Ø 17.46 mm, length 50 mm is a workshop‑grade inspection pin designed for repeatable dimensional and form checks on small to medium components. High dimensional precision ±0.002 mm Diameter Ø 17.46 mm Length 50 mm workshop version Made from special steel Reliable precision for routine inspection The test pin delivers a very fine accuracy of ±0.002 mm, making it suitable for demanding go/no‑go checks and end‑dimension verification. This level of precision reduces rework and rejects by providing a dependable reference for comparative measurements. The compact diameter of 17.46 mm combines with a 50 mm shank to offer a stable contact surface while remaining easy to manoeuvre between fixtures. Where standard micrometric checks are required, this inspection pin acts as a quick numerical and tactile indicator, shortening setup times and supporting smoother production sequences. Robust design built for workshop conditions Constructed from special steel and specified as a workshop version, the pin tolerates the everyday stresses of a production environment without sacrificing measuring quality. The material choice ensures wear resistance at the contact face and preserves geometric integrity over repeated use. A modest mass and balanced geometry give the component good handling characteristics, while the workshop specification indicates practical durability rather than fragile laboratory construction. For operations that demand both longevity and consistent contact behaviour, this execution minimises downtime for replacements and supports continuous quality routines. Practical fit into quality workflows With a concise footprint and universal geometry, the pin integrates easily into fixed gauges, test rigs or handheld inspection procedures. It functions as a stable reference for comparative tests and can be used for checking bores, seating faces and end dimensions. The clear numeric specification and robust finish make documentation straightforward when recording inspection results or compiling process capability data. Where traceability is required, the identifiable SKU and GTIN facilitate stock control and audit trails, enabling straightforward inventory management within established quality systems. Contact Metav Werkzeuge for tailored application guidance on the Metav IndustryLine single test pin and to confirm availability for specific inspection setups Technical data Article number: M323.H46 GTIN: 4061905070617 Manufacturer: Metav IndustryLine Dimensions & tolerances Diameter: 17.46 mm Length: 50 mm Weight: 0.15 kg Measurement range min/max: 17.46 mm Accuracy: ±0.002 mm Materials & special features Material: Special steel Version: Workshop execution Category: Test pins FAQ What is the declared accuracy of this inspection pin? The inspection pin is specified with an accuracy of ±0.002 mm, which supports high‑precision comparative and end‑dimension checks for production use. Is the pin suitable for use in a gauge or fixture? Yes, the Metav IndustryLine single test pin (SKU M323.H46) is manufactured for workshop environments and is suitable for incorporation into fixed gauges and test fixtures. Which material is used for the pin and what does that mean for wear resistance? The pin is made from special steel; this offers improved wear resistance at contact faces and maintains dimensional stability over repeated measurements. Can the pin be used for checking bore diameters and end faces? The geometry and diameter of the pin make it appropriate for bore checks, seating faces and end‑dimension verification in routine inspection tasks. How is the product identified for inventory and traceability? The product carries the GTIN 4061905070617 and article number M323.H46 for clear identification in stock systems and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.47mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Benefit from reliable workshop precision, robust special‑steel construction and dimensional accuracy of ±0.002 mm; order the gauge pin M323.H47 directly via Metav Werkzeuge or contact our consultants for tailored advice. Gauge pin M323.H47 (17.47 mm Ø, 50 mm length) – Metav IndustryLine A gauge pin M323.H47 for fast end‑dimension checks, fixture set‑up and go/no‑go verification in workshop metrology. Workshop version for daily use Special steel construction Dimensional accuracy ±0.002 mm Nominal diameter 17.47 mm Accurate end‑dimension control that reduces rework The gauge pin delivers highly repeatable checks for bores, locating holes and alignment fixtures. With a nominal diameter of 17.47 mm and a declared tolerance of ±0.002 mm, it provides the dimensional certainty demanded in production and inspection loops. The 50 mm length balances reach and rigidity, allowing confident insertion into mating bores without excessive deflection. These characteristics translate into fewer measurement cycles, reduced rework and a measurable improvement in process throughput for machining and assembly operations. Workshop‑ready design for efficient inspection routines Manufactured in special steel and specified as a workshop version, the component is engineered for frequent handling and quick checks at the bench or on the machine. The compact mass (0.15 kg) and ergonomic dimensions make it easy to position in jigs or test fixtures, supporting rapid throughput during batch checks. The robust surface treatment maintains running fit and concentricity over many cycles, enabling technicians to maintain flow in busy production environments while keeping quality checks concise and reliable. Traceability and durable build for long‑term use The component is traceable and clearly identifiable for inventory and QA processes, helping to integrate it into existing inspection regimes. The construction from special steel and the compact geometry minimise wear and preserve gauge form over time, which supports consistent measurement results and lowers lifetime cost of ownership. Supplied as a single gauge pin intended for routine verification tasks, it fits into modular inspection sets or can be used standalone for targeted go/no‑go operations in fixture set‑up and maintenance tasks. Contact Metav Werkzeuge in Emmerich to secure the Metav IndustryLine gauge pin M323.H47 or to request personalised technical advice by e‑mail or phone Technical Data Article number: M323.H47 GTIN: 4061905070624 Weight: 0.15 kg Facts Diameter: 17.47 mm Length: 50 mm Tolerance: ±0.002 mm Special features Material: special steel Workshop execution Category: Gauge pins (Messstifte) eClass: 21170231 FAQ What is the intended use of this gauge pin? The gauge pin is designed for end‑dimension checks, locating hole verification and fixture set‑up; the Metav IndustryLine M323.H47 is suitable for routine workshop inspection tasks. How precise is the measurement fit of the pin? The nominal diameter is 17.47 mm with a dimensional tolerance of ±0.002 mm, giving the M323.H47 the accuracy required for reliable go/no‑go and fit checks. Which material is used for this pin and why does it matter? The pin is made from special steel, chosen for wear resistance and dimensional stability to maintain form and concentricity under repeated use. Can the pin be integrated into existing inspection jigs? Yes; the 50 mm length and standard diameter make the pin easy to incorporate into fixtures, test plates and modular inspection sets for quick checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.48mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of precise dimensional control, robust workshop design and compact handling for consistent end‑dimension verification; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin M323.H48 — Gauge pin Ø 17.48 mm, 50 mm length (Metav IndustryLine) The Test pin M323.H48 is a single gauge pin designed for end‑dimension inspection and assembly verification in workshop environments, combining compact geometry with industrial tolerancing for repeatable checks Workshop version for robust everyday use Diameter 17.48 mm for end‑dimension checks Length 50 mm with ±0.002 mm accuracy Supplied in protective transport case Consistent measurement accuracy for production control The M323.H48 gauge pin delivers ±0.002 mm positional variation, making it suitable where tight tolerances matter in incoming inspection and final assembly. As a precision gauge pin with a nominal 17.48 mm diameter and 50 mm shaft length, it converts a simple plug‑fit into a quantifiable check that reduces rework and speeds decision‑making on the shop floor. The compact mass and rigid geometry ensure stable seating in fixtures, which supports automated and manual checking processes alike. Designed to endure workshop routines Built as a workshop version, this probe uses special steel chosen for a balance of hardness and toughness, offering wear resistance under frequent use. The component’s low mass (about 0.15 kg) and short footprint help to avoid bending moments during handling while enabling fast exchange in gauges and jigs. Delivered in a protective transport case, the pin arrives ready for safe storage and transit, lowering the risk of transport damage and preserving the measurement face for longer service life. Practical applications and operational benefits This single gauge pin is aimed at end‑dimension controls, go/no‑go verifications and assembly alignment tasks in machining and mechanical assembly environments. Compatibility with standard holding fixtures and the simple geometry make integration straightforward, while the tight tolerance supports traceable quality records in production reports. The compact form factor helps maintain throughput in high‑mix operations without sacrificing measurement confidence. For procurement and technical advice on Metav IndustryLine gauge pins, contact Metav Werkzeuge for precise availability, delivery options and suitability for specific inspection tasks. Technical Data Article number: M323.H48 GTIN: 4061905070631 SKU: M323.H48 Description: Test pin, single, 17.48 mm, length 50 mm Material: Special steel Weight: 0.15 kg Length: 50 mm Facts Diameter: 17.48 mm Measuring range min/max: 17.48 mm Accuracy: ±0.002 mm Mass: 0.15 kg Special features Workshop version Supplied in protective transport case Category: Gauge pins Application: End‑dimension checks FAQ What material is the pin made from? The pin is manufactured from special steel; the M323.H48 gauge pin combines hardness and toughness for extended service life. Is the pin suitable for end‑dimension verification? Yes, the test pin is intended for end‑dimension checks and assembly verification where a precise plug‑fit is required. Does the delivery include protective packaging? The gauge pin is supplied in a protective transport case to prevent damage during storage and shipment. What accuracy can be expected from this gauge pin? The M323.H48 is specified with an accuracy of ±0.002 mm, making it appropriate for fine tolerance inspections. Can this pin be used in standard holding fixtures? The compact geometry and standard diameter allow straightforward integration into common fixtures and jigs for production checks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.49mm Gauge Pin, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
The combination of tight tolerance and a rigid 50 mm length ensures reliable, repeatable end‑measurements in workshop use; the ±0.002 mm accuracy and special steel construction support consistent quality control. Order the gauge pin via Metav Werkzeuge or consult their specialists for batch and application advice. Gauge pin M323.H49 — 17.49 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin, single, 17.49 mm, 50 mm length engineered for precise end‑measurements and routine inspection tasks in workshop environments Workshop execution, robust and serviceable Diameter 17.49 mm for end‑measurement fits High repeatability with ±0.002 mm accuracy Made from special steel for wear resistance Reliable tolerance for fast, traceable inspections The gauge pin achieves a measured accuracy of ±0.002 mm, which translates into dependable repeatability for pass/fail checks and short‑run quality control. Such tight tolerance reduces uncertainty during go/no‑go evaluations and helps avoid unnecessary rework by ensuring that acceptance limits are checked with a stable reference. In practice, the high level of precision shortens inspection time per part and raises confidence in measurement results, making the pin suitable for critical end‑measurement tasks where small deviations matter. Durable workshop design for everyday handling Built as a workshop execution, the inspection pin combines a compact 50 mm shank with wear‑resistant special steel to resist abrasion in repeated use. The 50 mm length provides sufficient rigidity for direct insertion into fixtures and for hand‑held checks, while the modest mass (approx. 0.15 kg) keeps handling comfortable during serial inspections. This construction minimises deformation and maintains dimensional stability over many cycles, so uptime in production and service intervals are improved without complex maintenance requirements. Easy integration into inspection routines and traceability The item is supplied as a single inspection pin (SKU M323.H49) and is identified for logistical traceability by GTIN 4061905070648. As a compact gauge pin for end‑measurements, it integrates into existing jigs and checking fixtures and can be used as a reference master for dimensional comparisons. The straightforward geometry simplifies seating and repeatable alignment, while the workshop‑grade finish reduces the need for protective handling. For procurement and continuity of supply, Metav IndustryLine offers rapid fulfilment from its Emmerich quality hub. Contact Metav Werkzeuge to confirm fitment for specific fixtures or to arrange batch supply of M323.H49 directly from Emmerich Product details SKU: M323.H49 GTIN: 4061905070648 Description: Gauge pin, single, 17.49 mm diameter, 50 mm length Brand: Metav IndustryLine Measurements & accuracy Diameter: 17.49 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.15 kg Materials & features Material: Special steel Version: Workshop execution Application: End‑measurements / inspection Category: Gauge pins FAQ What level of accuracy does this gauge pin provide? The gauge pin is specified with an accuracy of ±0.002 mm, giving the M323.H49 the repeatability required for tight end‑measurement checks. Is the product supplied as a single item or in sets? This article is supplied as a single gauge pin; the product designation indicates an individual inspection pin for direct use in fixtures or hand checks. Which materials is the pin made from and how does that affect wear? Manufactured from special steel, the inspection pin offers improved wear resistance compared with untreated steels, extending service life under normal workshop conditions. Can this pin be used for fixture masters and gauge blocks? Yes — the rigid 50 mm length and precise diameter make the pin suitable as a reference in fixtures and for comparative measurements against master references. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.4mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a compact measuring reference that combines precise dimensional control (17.4 mm) with a tight repeatability of ±0.002 mm in a robust workshop configuration; the single test pin comes in a protective transport case and is available through Metav Werkzeuge — order the test pin directly via Metav Werkzeuge or ask our consultants if needed Test pin, single — 17.4 mm diameter, 50 mm length (Metav IndustryLine) Test pin, single — 17.4 mm diameter, 50 mm length for end‑measure verification and workshop inspection tasks in precision metrology Workshop version for daily industrial use Precision diameter 17.4 mm with ±0.002 mm accuracy Durable special steel construction for long service life Supplied in protective transport case Precision that stabilises process control The compact measuring reference offers a 17.4 mm nominal diameter with a verified ±0.002 mm variation, making it suitable where narrow tolerances are decisive. Presented as a single, dedicated pin, it serves as a fixed gauge for end‑measure and limit checks, reducing measurement scatter and enabling faster decision‑making on the shop floor. The combination of clear nominal size and low manufacturing dispersion supports consistent part validation and helps lower reject rates during series production. Built for routine workshop reliability Designed as a workshop version, the pin is manufactured from special steel selected for dimensional stability under normal use. With a 50 mm length and a mass around 0.15 kg, the component is easy to handle and resists incidental knocks common in busy production areas. The compact design simplifies storage and integration into existing jigging or inspection fixtures. Supplied in a protective transport case, the item arrives ready for safe storage and reduces the risk of transit damage. Simple integration and clear traceability The single test pin functions as a straightforward reference for end‑measure operations, comparative gauging and final inspection routines. Its straightforward geometry minimises setup time and makes it compatible with bench fixtures and optical comparators where a fixed, repeatable datum is required. Traceability is supported by the clear labelling and product identifiers supplied with each unit, which simplify inventory control and process documentation in quality management systems. For secure supply and application guidance for the Metav IndustryLine test pin, contact Metav Werkzeuge in Emmerich for local availability and technical consultation Technical data Article number: M323.H40 GTIN: 4061905069581 Manufacturer: Metav IndustryLine / Metav Werkzeuge GmbH Core dimensions & accuracy Diameter: 17.4 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Delivery condition: single pin in protective transport case Design: workshop execution (robustised for daily use) Category: test pins FAQ What applications is this test pin suitable for? The test pin, single — 17.4 mm diameter, 50 mm length is intended for end‑measure verification, comparative gauging and workshop inspection where a fixed dimensional reference is required. Is the material corrosion‑resistant? The pin is manufactured from special steel, chosen for dimensional stability and wear resistance; surface finish and corrosion performance depend on the specific workshop environment and storage routine. How precise is the diameter control on this pin? Diameter control is stated at 17.4 mm with a manufacturing variation of ±0.002 mm, making the component suitable for close‑tolerance checks in routine quality control. Can this pin be integrated into fixtures or comparators? Yes. The 50 mm length and cylindrical geometry allow easy mounting in inspection fixtures or use alongside optical comparators as a repeatable reference element. Is the product supplied with individual identification? Each test pin is provided as a single unit with product identification to aid traceability in inspection records for the Metav IndustryLine test pin (M323.H40). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com