Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
5.36mm Gauge Pin, ±0.001mm, 50mm Length, Workshop Version, Special Steel, Supplied In Case - Metav IndustryLine
Take advantage of the exceptional form accuracy and stable workshop construction to speed up routine inspections and reduce scrap rates; the combination of ±0.001 mm tolerance, 5.36 mm diameter and a 50 mm length makes this an efficient specialist gauge for small-bore verification. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for application guidance. Gauge pin M323.536 — 5.36 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A gauge pin designed for precision end‑measurements and go/no‑go checks in workshop environments, offering a compact 50 mm length and workshop-grade finish for everyday use High-precision ±0.001 mm tolerance Diameter 5.36 mm, length 50 mm Special steel for wear resistance Workshop design for regular inspection tasks Precision that shortens inspection cycles The ±0.001 mm accuracy of this gauge pin ensures repeatable results when checking bore sizes, plug fits or setting up fixtures. A tolerance at this level translates into reliable pass/fail decisions and reduces downstream rework; in practice, fewer ambiguous measurements mean faster throughput on assembly and inspection tables. The compact diameter of 5.36 mm and the 50 mm shank length keep handling simple while preserving the contact geometry needed for consistent results. Durable construction for daily workshop use Manufactured from special steel, this workshop model balances wear resistance with manageable mass, supporting frequent handling without rapid surface degradation. The construction keeps concentricity and roundness stable over many cycles, which in turn maintains measurement certainty and extends service intervals. At roughly 0.012 kg per item, the pin is easy to manipulate for repetitive checks, yet substantial enough to avoid bending under normal use. Designed for practical metrology workflows As a single, purpose-made gauge pin, the item is ideal for quick verification tasks, alignment of assembly jigs and comparative checks against master gauges. The simple design integrates seamlessly into standard inspection routines and complements digital or analogue measurement setups used in metrology departments. Metav’s role as a European quality filter contributes to consistent product quality and makes this specialist tool a pragmatic addition to workshop instrumentation, delivering confidence where small tolerances matter For workshop-grade precision, contact Metav Werkzeuge to discuss the Metav IndustryLine gauge pin M323.536 and secure the most suitable supply and delivery options from our Emmerich centre Technical data Article number: M323.536 GTIN: 4061905057915 Brand: Metav IndustryLine Facts Diameter: 5.36 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.012 kg Special features Material: Special steel Version: Workshop execution Packaging: Supplied individually Category: Gauge pins FAQ What is the declared tolerance for this gauge pin? The gauge pin M323.536 is specified with a tolerance of ±0.001 mm, suitable for fine inspection and functional checks. Which materials is the pin suitable for checking? This pin is a dimensional standard used to verify holes and fittings in common engineering materials; the product data specify its geometric purpose rather than application‑specific cutting behaviour. Is the item supplied as part of a set or individually? The M323.536 is supplied as a single gauge pin, designed for standalone use in inspection or as an addendum to existing gauge sets. How should the pin be stored to retain accuracy? Keep the pin clean and dry, store it in a protective tray or drawer and avoid impacts; maintaining surface condition preserves the declared form and tolerance. Can this pin be used for calibration or as a reference standard? The pin serves as a dimensional verification tool; for use as a certified reference standard, please refer to specific calibration documents or product listings that state a calibration certificate. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.37mm Test Pin ±0.001 mm Length 50 mm Workshop Version Plastic Case - Metav IndustryLine
Taking advantage of ultra‑fine tolerance and a robust workshop design ensures reproducible end‑measure checks and fewer rejected parts; combine ±0.001 mm accuracy with a compact 5.37 mm diameter and order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.537 — precision 5.37 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.537 is a single precision test pin for end‑measure verification and fit checks in workshop metrology High precision ±0.001 mm tolerance Diameter 5.37 mm for end‑measure fits Compact 50 mm length for tight assemblies Delivered in a protective case Reduced rework through measurable precision The core benefit of this gauge pin is its high repeatability, achieved by a specified tolerance of ±0.001 mm. Such fine accuracy supports reliable go/no‑go decisions during incoming inspection and production sampling, reducing rework and downtime. The precise diameter control minimises measurement scatter, so process control charts reflect actual production quality rather than instrument variation. Dependable fit verification for mating parts With a 5.37 mm diameter manufactured to a tight tolerance, the pin is ideal for end‑measure checks where a defined plug gauge is required. Using a discrete reference pin instead of improvised tools speeds up pass/fail checks on housings, bores and dowel locations. The compact geometry enables insertion into shallow bores and small assemblies, making it suitable for precision components in tooling and fixtures. Robust workshop design built for daily use Constructed from special steel and specified as a workshop version, the pin resists wear while remaining economical for routine use. The 50 mm working length balances handling and stability, allowing single‑handed positioning without compromising stiffness. Hardwearing material and careful finishing preserve diameter integrity across numerous cycles, extending useful life under regular shopfloor conditions. Practical handling and protective storage Delivered as a single piece and supplied in a protective case, the pin is ready for secure storage and safe transport between workstations. The protective case reduces contamination and prevents damage to the measuring surface, which is essential given the ±0.001 mm tolerance. Lightweight handling characteristics support quick checks on the production line or in assembly stations without adding bulk to inspection kits. Seamless integration into inspection routines The pin complements existing dimension control methods and can be introduced into first‑article inspection, batch sampling or fixture calibration procedures. Its repeatable geometry supports traceable measurements when recorded against inspection protocols, helping to document conformity and to streamline quality reports. Use as a reference gauge to spot deviations early and maintain production throughput. Proven distribution and support from Metav IndustryLine Choosing this precision pin means partnering with a supplier that promotes the democratisation of precision: Metav IndustryLine couples a wide product range with dependable logistics from Emmerich. The brand’s commitment to reliable supply and transparent handling helps workshops and industry buyers reduce supplier complexity while maintaining measurement integrity. Contact Metav Werkzeuge today for tailored advice on integrating this Metav IndustryLine gauge pin into inspection workflows and to confirm availability with the Emmerich warehouse via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.537 GTIN: 4061905057922 Eclass: 21170231 Facts Diameter: 5.37 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.012 kg Special features Material: Special steel Workshop version Delivered in protective case Single gauge pin FAQ What materials is this pin made from? The gauge pin is made from special steel; the material gives durability for routine workshop use and preserves the ±0.001 mm diameter accuracy of M323.537 (Metav IndustryLine). Is the pin supplied ready for inspection use? Yes. The M323.537 is supplied as a single piece and delivered in a protective case for safe storage and immediate use in inspection and assembly tasks. Can this pin be used for shallow bores and small fixtures? The compact 50 mm length and 5.37 mm diameter make it suitable for shallow bores, dowel checks and small fixture verification where a short reference pin is required. How does this pin help with process control? Using the gauge pin as a repeatable reference reduces measurement scatter and supports consistent go/no‑go decisions, improving data reliability in quality documentation. Is the M323.537 intended for heavy production environments? The workshop version is designed for regular shopfloor checks; its special steel construction offers a balance between durability and cost‑efficient replacement when required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.38mm Precision Gauge Pin ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of pinpoint dimensional control, compact handling and workshop‑grade durability to streamline end‑measure checks and assembly inspections; order the item directly via Metav Werkzeuge or consult the Metav technical team for application advice. M323.538 Gauge Pin — 5.38 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) M323.538 gauge pin is a single workshop‑grade inspection pin designed for precise end‑measure verification and fit testing in production and bench‑level inspection workflows. Workshop version for everyday shop use Diameter 5.38 mm for precise fit Tolerance ±0.001 mm for high accuracy Length 50 mm, compact inspection pin Precision that reduces rework and speeds decision making The compact inspection pin delivers ±0.001 mm positional certainty for critical passing checks and dimensional verification. With a nominal diameter of 5.38 mm, this pin supports repeatable go/no‑go assessments and fine adjustment of fixtures where small deviations have large consequences. The exceptionally tight tolerance translates into fewer rejects and reduced rework, enabling faster throughput on small batches and high‑mix production runs while maintaining traceable results. Durable workshop design for regular handling Manufactured in special steel and finished as a workshop version, the pin balances wear resistance with practical handling. The 50 mm shaft length and low mass (approx. 0.012 kg) make the component easy to position in confined measuring setups and quick to manoeuvre during serial checks. Robust material choice and shop‑oriented finishing preserve the critical diameter over repeated seating cycles, extending service intervals and ensuring consistent mating with mating bores and gauges. Designed to integrate into inspection processes and fixtures As a single inspection element, the pin is suitable for end‑measurement, assembly clearance checks and precision fit trials in both manual and semi‑automated routines. Its compact format supports use in fixture pockets, datum checks and end‑face gauges where space is limited. Paired with calibrated masters or block sets, the pin contributes to a reproducible quality workflow and straightforward documentation of measurement results, supporting informed quality decisions on the shop floor. Choose the Metav IndustryLine M323.538 gauge pin for consistent end‑measure control — contact Metav Werkzeuge in Emmerich for tailored advice and dependable supply Technical data Article number: M323.538 GTIN: 4061905057939 Category: Messstifte (gauge pins) Manufacturer: Metav IndustryLine Facts Diameter: 5.38 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.012 kg Special features Material: special steel Workshop execution Single inspection pin for end‑measure and fit testing FAQ What are the exact diameter and tolerance of this gauge pin? The M323.538 gauge pin has a diameter of 5.38 mm with a tolerance of ±0.001 mm for high‑precision checks. Which applications is this inspection pin suited to? This inspection pin from Metav IndustryLine is intended for end‑measure verification, clearance and fit tests, and routine dimensional checks in workshop and production environments. What is the pin made from and how does that affect durability? The M323.538 is manufactured from special steel; this material choice improves wear resistance and maintains the critical diameter under repeated use. Can the pin be used in fixture pockets and confined inspection setups? Yes — the compact 50 mm length and low weight make the pin suitable for fixture pockets, datum checks and tight measuring arrangements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.39mm Test Probe, Single, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
Combining micrometric tolerance of ±0.001 mm, a precise 5.39 mm diameter and a robust 50 mm length, this single gauge pin delivers repeatable end‑measure checks in workshop and inspection routines; order via Metav Werkzeuge or consult our specialists for application advice. M323.539 gauge pin — 5.39 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) The M323.539 is a single gauge pin designed for accurate end‑measure verification and bore checking in workshop and metrology settings. High precision ±0.001 mm tolerance Diameter 5.39 mm for end‑measure checks 50 mm hardened special steel length Supplied in protective transport case Consistent, micrometric accuracy for inspection tasks The primary benefit of this gauge pin is its ±0.001 mm rated tolerance, which supports tight acceptance criteria and helps reduce false rejects during quality control. Built for measurement use rather than machining, the pin’s nominal 5.39 mm diameter and short 50 mm shank reduce flex and contact variation, enabling repeatable go/no‑go or reference checks. In plain terms, the fine tolerance means that small deviations in component bores can be detected reliably, making the part suitable for precision tasks such as final bore verification and end‑dimension control. Durable workshop design that keeps handling simple Constructed from special steel and specified as a workshop version, the pin balances surface hardness and corrosion resistance for everyday use at the bench. The 50 mm length provides a practical working reach while remaining stiff under hand inspection, so single‑operator checks are straightforward. Supplied in a protective transport case, the pin arrives ready for safe storage and transport between inspection points; this reduces the risk of surface damage that would otherwise affect measurement certainty. Practical integration into measurement routines The gauge pin serves as a compact reference for quick dimensional checks, comparing measured bores or fit conditions against the pin’s nominal size. Its compact form factor and workshop specification suit routine in‑process controls and final inspections where rapid verification of end dimensions is required. As a single, calibrated tool is not declared in the product data, this pin is best used alongside established calibration schedules and reference standards maintained by the inspection department to preserve long‑term traceability. Contact Metav Werkzeuge for application guidance or to secure the Metav IndustryLine M323.539 for your inspection bench — our Emmerich team can advise on storage, calibration paths and compatible inspection routines Technical data Article number: M323.539 GTIN: 4061905057946 ECLASS: 21170231 Core data Diameter: 5.39 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.012 kg Special features Material: Special steel Workshop version Supplied in transport case FAQ What is the intended use of this gauge pin? The M323.539 gauge pin is intended for end‑measure verification and bore checks where a precise reference diameter of 5.39 mm is required. Is the M323.539 supplied with a calibration certificate? The product data does not state a calibration certificate; calibration and traceability should be handled according to the purchaser’s inspection procedures. Can this pin be used for go/no‑go testing? Yes, the pin’s tight tolerance and defined nominal diameter make it suitable as a reference for go/no‑go or fit checks in workshop inspection routines. How should the gauge pin be stored to retain accuracy? Store the gauge pin in its protective transport case and keep it in a stable, low‑humidity environment; handle with clean hands or gloves to avoid surface contamination. Is the M323.539 suitable for field use in a production environment? The workshop specification and transport case make the pin suitable for routine checks on the shop floor, provided standard care and scheduled recalibration are observed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.3mm Gauge Pin Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Benefit from a compact inspection solution that combines ±0.001 mm tolerance, a 5.30 mm diameter and a robust 50 mm length for reliable end‑dimension checks; order directly via Metav Werkzeuge or consult our technical advisors for specification matching. M323.530 Gauge Pin — Precision Test Pin, 5.30 mm, ±0.001 mm, 50 mm (Metav IndustryLine) A M323.530 precision gauge pin designed for end‑measurement and inspection tasks in workshop metrology, ideal where micron‑level repeatability is required Precision tolerance ±0.001 mm Diameter 5.30 mm, length 50 mm Workshop version in special steel Deliver reproducible fits with micron accuracy A gauge designed for exacting inspection routines, the gauge pin gives a guaranteed tolerance of ±0.001 mm, equivalent to 1 µm, which is suitable for critical go/no‑go checks and reference measurements. This resolution reduces uncertainty when verifying bores, plug fits or final dimensions and supports consistent assembly quality. The narrow tolerance is particularly valuable for small mechanical parts and precision jigs where even slight deviations affect function. Built for workshop handling and durability Constructed from special steel in a workshop specification, the inspection pin balances surface integrity with day‑to‑day usability. The compact 50 mm length and 5.30 mm diameter provide a stable contact area while remaining easy to position in fixtures or measurement aids. Supplied in a protective transport case, the single test pin stays protected during storage and transit, preserving its measuring edge and surface finish for repeatable use. Integrates smoothly into measurement workflows The single‑piece test pin is suited for use as a reference gauge in tactile and optical measurement setups, and for manual inspection with micrometres, height gauges or comparator benches. The M323.530 test pin is also practically useful when establishing reference limits in fixture set‑up or when checking mating components during final inspection. Its compact form factor supports quick handling and short cycle inspection without compromising accuracy. Traceability and clear identification for procurement Identification is simplified with the SKU M323.530 and GTIN 4061905060878, enabling straightforward inventory and procurement processing. The low mass (approx. 0.012 kg) and workshop design make this inspection pin a practical choice for toolrooms and quality departments seeking a reliable, repeatable gauge for end‑dimension verification. Order the M323.530 gauge pin via Metav Werkzeuge for workshop‑ready precision; contact our specialists in Emmerich for tailored advice and specification support Technical Data Article number: M323.530 GTIN: 4061905060878 SKU: M323.530 Facts Diameter: 5.30 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.012 kg Material: Special steel Special features Workshop version Supplied in protective transport case Single test pin for end‑measurements FAQ What accuracy does this inspection pin provide? The inspection pin offers an accuracy of ±0.001 mm (1 µm), suitable for fine tolerance checks and precision fitting controls. Can the pin be used for bore checking and plug fits? Yes, the M323.530 gauge pin is intended for end‑dimension verification, bore checking and plug‑fit assessments in workshop and production environments. What is the material and is it suitable for everyday workshop use? The pin is made from special steel and supplied in a workshop specification, making it suitable for routine metrology tasks while retaining dimensional stability. Is the pin supplied individually or in sets? This listing describes a single test pin supplied individually in a protective transport case for secure handling and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.41mm Gauge Pin Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
The robust workshop version delivers a 5.41 mm reference diameter with a ±0.001 mm tolerance and a 50 mm shaft that provides repeatable end‑measure checks; order the pin via Metav Werkzeuge or request advice from our consultants for application-specific selection. M323.541 gauge pin — 5.41 mm diameter, ±0.001 mm accuracy, Metav IndustryLine The M323.541 gauge pin is a workshop‑grade precision pin designed for end‑measure verification, fixture alignment and reference checks in inspection and jigging tasks. ±0.001 mm tolerance for high-precision checks Workshop-grade construction in special steel 5.41 mm diameter for standard end‑measure gauges 50 mm length suited to fixture and gauge use Reduce measurement uncertainty with a calibrated reference The M323.541 functions as a reliable reference dowel for inspection routines where repeatable reference points are required. Its ±0.001 mm accuracy reduces measurement uncertainty in pass/fail checks and comparative gauging, helping to shorten inspection cycles and avoid unnecessary rework. Using a dedicated precision pin as a fixed datum simplifies gauge set‑up and ensures consistent results across multiple shifts, which is particularly useful when several operators share the same test benches or fixtures. Durable design for frequent workshop handling Built in a workshop‑grade specification from special steel, this test pin is designed to resist wear under regular insertion and withdrawal in jigs and bore gauges. The 50 mm shaft length gives a comfortable engagement depth for most fixture applications while remaining light and easy to handle; the low mass supports quick positioning and reduces operator fatigue during repetitive checks. The material choice balances hardness and toughness so the pin sustains its reference surface over many cycles, extending service life and lowering long‑term tooling costs. Seamless integration into inspection and fixture processes As an end‑measure reference, the pin is suitable for alignment, go/no‑go checks and positional verification in small‑bore applications. Its 5.41 mm diameter matches common bore and plug scenarios, allowing straightforward substitution into existing fixture plates or test rigs without redesign. The compact form factor supports dense fixture layouts and tight access points while keeping the reference geometry stable. For production environments seeking faster in‑line gauging, the pin simplifies fixturing and reduces auxiliary setup time, contributing to higher overall throughput. Contact Metav Werkzeuge in Emmerich to specify the M323.541 gauge pin for your inspection bench—our specialists will advise on fitment and immediate supply; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M323.541 GTIN: 4061905058844 Brand: Metav IndustryLine Manufacturer: Metav Werkzeuge GmbH Facts Diameter: 5.41 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.012 kg Special features Workshop‑grade execution Material: special steel Category: gauge pins / test pins Application hint: end‑measure and fixture reference FAQ What is the intended use for this gauge pin? The gauge pin is intended as a precision reference for end‑measure checks, fixture alignment and pass/fail gauging where a stable datum of 5.41 mm is required. Can the M323.541 be used in production jigs and fixtures? Yes, the M323.541 gauge pin is specifically designed for workshop and production use, offering robust special steel construction suitable for frequent insertion in fixtures. How precise is the diameter of the pin? The pin is specified with a tolerance of ±0.001 mm, providing a high‑precision reference for accurate inspection and comparative measurements. Is the pin compatible with standard bore gauges and plug fixtures? The 5.41 mm diameter and 50 mm length make the pin compatible with common small‑bore fixtures and plug‑type holders used in inspection benches. What benefits does the workshop version provide compared with general‑purpose pins? The workshop version prioritises durability and handling for repeated use in industrial environments, combining a robust material choice with a form factor optimised for fixture integration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.42mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm measurement accuracy, a precise 5.42 mm diameter and a protective transport case to ensure reliable end‑measure checks in everyday workshop metrology; order the gauge pin directly via Metav Werkzeuge or contact our consultants for integration advice. M323.542 Gauge Pin — 5.42 mm, ±0.001 mm (Metav IndustryLine) The M323.542 gauge pin is a single inspection pin for precise end‑measure verification and go/no‑go checks in workshop metrology. Workshop‑grade special steel Diameter 5.42 mm ±0.001 mm 50 mm length for deeper checks Supplied in a transport case Ensure measurement certainty with sub‑micron repeatability The M323.542 is engineered for applications that demand reproducible dimensional verification. With a declared tolerance of ±0.001 mm, this individual gauge pin supports decisive go/no‑go assessments and high‑confidence pass/fail checks on bores, seats and end‑measures. The fine tolerance reduces subjective judgement in manual inspection and helps maintain consistent quality across production batches, improving throughput without sacrificing control. Built for workshop use — durable and easy to handle Constructed from special steel in a workshop specification, the pin resists wear while remaining straightforward to handle during routine checks. Its 50 mm length provides reach for deeper features, while the compact diameter of 5.42 mm suits a wide range of small‑bore checks. Delivered in a protective transport case, the pin is protected in transit and storage, preserving the measuring surface and minimising the need for immediate refurbishment. Integrates smoothly into existing inspection routines Weighing just 0.012 kg and supplied as a single unit, this compact inspection tool is ideal for spot checks, fixture validation and comparative gauging tasks on the shop floor. The clear article identification (SKU M323.542, GTIN 4061905058851) simplifies inventory and traceability. By adding a purpose‑made pin like this to a toolbox, measurement cycles become quicker and non‑conforming parts are detected earlier, reducing rework and supporting a robust quality process. Request tailored advice from Metav Werkzeuge in Emmerich — our metrology specialists will explain how the M323.542 gauge pin fits specific inspection workflows; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personal consultation. Technical data Article number: M323.542 GTIN: 4061905058851 Brand: Metav IndustryLine Category: Gauge pin / Messstift Facts Diameter: 5.42 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.012 kg Special features Material: Special steel Workshop execution Supplied in a transport case Single gauge pin SKU: M323.542 FAQ What is the declared accuracy of this gauge pin? The M323.542 gauge pin is specified with an accuracy of ±0.001 mm, suitable for precise go/no‑go checks and end‑measure verifications. Which materials is the pin compatible with for inspection tasks? As a dimensional inspection tool, the pin itself is made from special steel and is intended for checking components regardless of workpiece material; it does not alter the workpiece. Does the product arrive ready for immediate use? The M323.542 is supplied as a single, workshop‑grade gauge pin in a protective transport case and is ready for integration into inspection routines. How should the gauge pin be stored between uses? Store the pin in its supplied transport case to protect the measuring surface from contamination and mechanical damage. Can this pin be used for deeper bore measurements? The 50 mm length provides additional reach for deeper features and is suitable for many shop‑floor bore and end‑measure checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.43mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Compact performance and repeatable results: the precision gauge pin M323.543 combines ±0.001 mm dimensional certainty with a Ø 5.43 mm ground shaft and a 50 mm working length, making it ideal for routine verification and in-process checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Precision gauge pin M323.543 – Ø 5.43 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) Precision gauge pin M323.543 is a workshop-grade cylindrical gauge designed for dimensional verification of bores, end measurements and reference checks in production and assembly environments. ±0.001 mm accuracy Ø 5.43 mm ground diameter 50 mm working length Special steel with protective case Sub-micron accuracy for reliable production checks The gauge pin delivers an accuracy of ±0.001 mm, equivalent to 1 μm, which ensures high repeatability when verifying critical diameters. Such sub-micron precision reduces inspection uncertainty and supports tighter process control, making the component suitable for both final inspection and inline checks. The specified tolerance is appropriate for high-precision mechanical assemblies where small deviations can lead to functional issues. Robust workshop design that simplifies handling Manufactured in special steel and supplied as a single-piece, the pin balances rigidity and manageable mass (approx. 0.012 kg) for straightforward handling on the shop floor. The workshop version designation indicates practical finishing and durability for regular use; the item is protected during transport by a protective case, which keeps the gauge pin free from nicks and contamination until first use. The compact 50 mm length supports manual placement and confined-space inspection without compromising stability. Integrates into quality workflows and gaging sets As a precisely ground cylindrical reference, the unit is ideal for comparative checks, seat and bore verification or as a master plug during assembly set-up. The combination of Ø 5.43 mm nominal diameter and close tolerance makes it a reliable reference for go/no-go judgements when paired with calibrated fixtures or visualising equipment. Clear identification (SKU M323.543, GTIN 4061905058868) supports inventory control and traceability within quality management systems, helping to document measurement routines and maintain audit trails. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge to arrange supply of the M323.543 gauge pin or to discuss integration into existing inspection routines: info@metav-werkzeuge.com · +49 2822 7131930 Technical data SKU: M323.543 GTIN: 4061905058868 Manufacturer: Metav IndustryLine Weight: 0.012 kg Facts Diameter: 5.43 mm Accuracy: ±0.001 mm Length: 50 mm Special features Material: Special steel Workshop design Delivered in protective case Single gauge pin FAQ What tolerance does the gauge pin offer? The gauge pin provides an accuracy of ±0.001 mm, suitable for high-precision dimensional checks. Is the pin suitable for routine workshop inspection? Yes, the workshop-grade finish and protective case make the pin well suited to regular use in production and assembly environments. How is the item identified for traceability? The product is listed as M323.543 and carries GTIN 4061905058868 for inventory and audit purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.44mm Gauge Pin Precision ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of ultra‑fine dimensional control combined with workshop‑ready durability: the gauge pin delivers 5.44 mm nominal diameter with ±0.001 mm tolerance and a 50 mm shaft for reliable end‑measurement. Order this precision component directly via Metav Werkzeuge or consult our specialists for application advice. M323.544 Gauge Pin — Gauge pin, 5.44 mm ±0.001 mm, 50 mm length (Metav IndustryLine) M323.544 is a compact gauge pin designed for high‑accuracy end‑measurement and component verification in workshop and inspection environments. Diameter 5.44 mm with ±0.001 mm tolerance 50 mm hardened special‑steel shaft Supplied in protective transport case Measure with micrometre‑grade certainty to cut rejects and rework The M323.544 gauge pin provides a nominal diameter of 5.44 mm with an outstanding ±0.001 mm tolerance, equating to single‑micrometre resolution for go/no‑go checks and reference measurements. Such precision reduces the need for repeat machining and lowers scrap rates by establishing a reliable master datum for bore and plug tests. Calibrated shop gauges at this level support traceable inspection routines and speed up in‑process checks by replacing labour‑intensive comparative methods with a single, verifiable standard. The result is measurable efficiency gains across serial inspection and setup tasks. Solid construction for repeatable contact and long service life Manufactured from special steel and specified at a 50 mm length, the pin balances stiffness with manageable handling in the workshop. The hardened shaft resists wear on the contact surface, preserving the nominal diameter over many insertion cycles and ensuring repeatable measurements. Supplied in a protective transport case, the component stays protected during storage and transit, maintaining surface integrity and dimensional stability. For inspection benches and fixture sets, this combination of material and finish minimises dimensional drift and extends the service interval for reference gauges. Practical fit into inspection workflows and machining checks Designed for straightforward integration into verification routines, the pin is suitable for bore gauging, end‑position references and comparative inspection tasks in metalworking and precision assembly. Its compact form supports rapid manual checks as well as fixture mounting for repetitive tests, helping to shorten NDT and QA cycles. The controlled tolerance makes the pin ideal for final inspection and first‑off checks where tight dimensional control is demanded. For environments that require robust documentation, the pin is compatible with typical metrology documentation practices and can be recorded as a workshop master in quality control logs. Secure robust, micrometre‑grade measurement from Metav IndustryLine — contact Metav Werkzeuge in Emmerich for tailored advice and dependable supply Technical data Article number: M323.544 GTIN: 4061905058875 Brand: Metav IndustryLine Numerical data Nominal diameter: 5.44 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.012 kg Special features Material: special steel Workshop version Supplied in protective transport case FAQ What level of precision can be expected from this gauge pin? The M323.544 gauge pin from Metav IndustryLine is specified to ±0.001 mm, providing micrometre‑level precision suitable for fine inspection and reference checks. Is the pin suitable for routine bore gauging in a production environment? Yes, the hardened special steel shaft and the 50 mm length make the M323.544 suitable for repeated bore gauging and fixture use in workshop and light production settings. How is the gauge pin delivered to ensure dimensional protection? Delivery of the M323.544 includes a protective transport case to preserve surface condition and dimensional integrity during storage and transit. Can this pin be used as a master for comparative inspection setups? The dimensional stability and ±0.001 mm tolerance make the M323.544 appropriate as a master gauge for comparative inspections and first‑article verification rounds. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.45mm Gauge Pin 50mm Length ±0.001mm Workshop Version - Metav IndustryLine
Precise gauging for consistent inspection results: the workshop‑grade gauging pin combines a 5.45 mm diameter with a tight ±0.001 mm tolerance and a 50 mm length to support repeatable end‑measure checks; supplied as a single pin in a protective case, it is ready for integration into gauging jigs and fixtures. Order the gauging pin directly via Metav Werkzeuge or consult our advisers for specification matching. Gauging pin M323.545 — 5.45 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) A gauging pin M323.545 designed for precise end‑gauge checks and inspection tasks in workshop environments, offering robust workshop‑grade construction for routine production control. ±0.001 mm tolerance Diameter 5.45 mm Length 50 mm workshop version Special steel construction Consistent accuracy for reliable production control The core advantage is measurable: ±0.001 mm tolerance ensures that the pin performs as a fine reference in inspection sequences where small deviations matter. By limiting dimensional variation to one micrometre, the component supports tighter process control and reduces false rejects during incoming inspection or final checks. The small form factor combined with a defined length gives stable seating in gauges, which translates into repeatable measurement results and fewer re‑checks on the shop floor. Built to withstand everyday workshop use Constructed from special steel and specified as a workshop‑grade item, the pin tolerates typical handling and fixture contact without compromising its functional surface. The moderate mass—about 12 g—keeps the pin easy to position in jigs while limiting the influence of inertia during quick checks. Supplied as a single unit in a protective case, the design reduces transport and storage risk, helping to preserve the calibrated geometry that underpins reliable inspection over time. Easy integration into inspection jigs and end‑gauge assemblies With a nominal diameter of 5.45 mm and a 50 mm total length, the pin suits common end‑gauge and go/no‑go assemblies where precise plug‑type references are required. The straight, hardened shaft adapts readily to pinned locating points and can be used as a master for verifying bore sizes, fixture alignment or for checking end‑masses in serial production. Lightweight and compact, the component streamlines fixture changes and keeps cycle time low without sacrificing measurement confidence. For dependable end‑measure control choose the Metav IndustryLine gauging pin M323.545 — contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich. Technical data Article number: M323.545 GTIN: 4061905058882 Manufacturer: Metav IndustryLine Facts Length: 50 mm Diameter: 5.45 mm Tolerance: ±0.001 mm Weight: 0.012 kg Special features Workshop version Material: special steel Supplied as single pin Delivered in protective case Intended for end‑gauge and inspection use FAQ What tolerance does the gauging pin provide? The gauging pin M323.545 from Metav IndustryLine is manufactured to a tolerance of ±0.001 mm. What are the pin's main dimensions? The pin has a nominal diameter of 5.45 mm and a total length of 50 mm; weight is approximately 0.012 kg. What material is the pin made from? The pin is produced from special steel, specified for workshop durability and stable dimensional performance. How is the product supplied? The product is supplied as a single gauging pin in a protective case for transport and safe storage. Which inspection tasks is the pin suited to? Typical uses include end‑gauge checks, go/no‑go verifications and fixture alignment where a precise plug‑type reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.46mm Gauge Pin, Workshop Version, ±0.001mm Accuracy, 50mm Length - Metav IndustryLine
Take advantage of the combination of micron-level accuracy, compact dimensions and robust workshop design for reliable end‑measure inspections; order the precision gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Precision Gauge Pin M323.546 – 5.46 mm, ±0.001 mm (Metav IndustryLine) A Precision Gauge Pin M323.546 for high‑accuracy end‑measure checks and plug‑fit verification in workshop environments Tolerance ±0.001 mm Diameter 5.46 mm precision Length 50 mm workshop version Supplied in protective case High‑accuracy inspection where every micron counts The M323.546 is a precision gauge pin engineered for applications that demand repeatable results at the micrometre scale. With a claimed tolerance of ±0.001 mm (one micrometre), this inspection pin reduces uncertainty in go/no‑go and end‑dimension checks, enabling faster acceptance decisions and fewer reworks. The small nominal diameter of 5.46 mm and compact form factor make it ideal for tight fits and detailed assembly checks in small components, where conventional measuring tools can be cumbersome. Robust workshop design and convenient handling Manufactured in a workshop version, the pin combines compactness with practical resilience for day‑to‑day use. The 50 mm length provides a secure seating and comfortable handling during tactile measurements, while the construction from special steel ensures dimensional stability under normal workshop loads. Delivery in a protective case simplifies storage and transport and helps keep the gauge pin free from contamination and incidental damage between uses, maintaining its measurement integrity over time. Practical use cases and process benefits This precision pin suits final inspection, plug‑gauge checks and reference comparisons in small‑part production, metrology benches and laboratory settings. Integrating the M323.546 into routine quality checks shortens inspection cycles and supports traceable results for batch documentation. The compact dimensions favour work on delicate parts and assemblies where access is limited, and the clear specification of ±0.001 mm allows production engineers to define realistic tolerances and error budgets in process control. For dependable end‑measure verification, request the M323.546 precision gauge pin from Metav Werkzeuge or contact our Emmerich specialists for tailored measurement advice Technical data Article number: M323.546 GTIN: 4061905058899 Eclass: 21170231 Manufacturer: Metav IndustryLine Numbers Diameter: 5.46 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.012 kg Special features Workshop version Material: Special steel Supplied in protective case FAQ What level of precision does this gauge pin provide? The M323.546 precision gauge pin from Metav IndustryLine offers a tolerance of ±0.001 mm, permitting inspections at the micrometre level suitable for fine mechanical and precision assembly tasks. Is the pin suitable for small‑component plug‑fit checks? Yes; the 5.46 mm diameter and 50 mm length make the inspection pin well suited to plug‑fit and end‑dimension checks on small components where access is limited. How is the gauge pin delivered for safe handling? The gauge pin is supplied in a protective case to facilitate transport and to protect the pin from contamination and handling damage between uses. What material is used for the M323.546 gauge pin? The inspection pin is manufactured from special steel, chosen for dimensional stability and suitability for workshop use. Can this pin be used for laboratory calibration comparisons? The M323.546 can serve as a reference for comparative checks and final inspections in metrology benches and controlled workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.47mm Gauge Pin, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of workshop‑grade construction, a 5.47 mm diameter held to ±0.001 mm tolerance and a 50 mm length for consistent end‑measurement results; order the Test pin M323.547 directly via Metav Werkzeuge or ask our consultants if needed. Test pin M323.547 — precision gauge pin, 5.47 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) Test pin M323.547 is a workshop‑grade precision gauge pin designed for end‑measurement and quality control tasks in inspection and production environments. Workshop‑grade construction and finish Diameter held to ±0.001 mm tolerance Single‑piece precision pin, 50 mm length Manufactured from special steel for wear resistance Reliable accuracy that reduces rework The gauge pin delivers a ±0.001 mm specification that supports repeatable end‑measurement checks and tight fit verifications. With a nominal 5.47 mm diameter and a 50 mm shank, the component is suited to routine dimensional inspections where minute deviations matter. The tight tolerance reduces the risk of false rejects and minimises downstream rework by providing a stable reference for go/no‑go assessments and calibration checks. Built for workshop durability and frequent handling Constructed from special steel and offered in a workshop‑grade execution, the pin resists wear in daily use while maintaining geometric integrity. The 50 mm length balances reach with rigidity, making handling straightforward and measurements consistent across repeated cycles. Robust material choice and finishing ensure long service life under typical shopfloor conditions and help to preserve the pin’s measuring surface during handling and storage. Easy integration into inspection routines The single‑pin format simplifies inventory control and inspection planning: the component functions as a reference plug in manual gauges, fixtures and comparative checks. Traceable identifiers such as the SKU and GTIN support part management and document control within quality systems, while the compact form factor enables quick exchange in jigs or test rigs — reducing downtime during measurement tasks. Practical benefits for production control Using a precision reference pin with defined tolerance facilitates faster decision‑making at inspection stations. The consistent geometry enhances repeatability of fit tests and assembly checks, improving throughput where frequent dimensional verifications are required. This pragmatic approach to precision translates into measurable efficiency gains across inspection steps without requiring complex measurement equipment. Specification clarity and traceability Clear technical identifiers and basic dimensions simplify procurement and documentation: known diameter, length and tolerance mean the pin can be specified directly in inspection plans and drawings. The robust specification supports consistent quality control procedures and helps ensure compatibility with existing gauges and fixtures used in production or metrology labs. For consistent end‑measurement performance choose the Metav IndustryLine Test pin M323.547 and contact Metav Werkzeuge in Emmerich for delivery details and procurement support: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.547 GTIN: 4061905058905 Manufacturer: Metav IndustryLine Facts Diameter: 5.47 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.012 kg Special features Material: Special steel Format: Single test pin Intended use: End‑measure checks and fit verification FAQ What is the declared tolerance of this gauge pin? The Test pin M323.547 is specified with a tolerance of ±0.001 mm, suitable for precise end‑measurement tasks. Can this pin be used in usual workshop jigs and fixtures? Yes, the single‑piece, 50 mm length and 5.47 mm diameter make the pin compatible with common jigs, fixtures and manual gauge setups. What material is the pin made from and why does it matter? The pin is manufactured from special steel; this material offers improved wear resistance and maintains geometry under frequent handling. How is the part identified for procurement and traceability? Use the article number M323.547 and GTIN 4061905058905 to ensure correct ordering and documentation in quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.48mm Gauge Pin, ±0.001mm, Length 50mm, Workshop Version, Special Steel, Packed in Case - Metav IndustryLine
Take advantage of the combination of ±0.001 mm repeatability, robust special‑steel construction and a compact 50 mm length for reliable end‑dimension checks; order the Test Pin M323.548 directly via Metav Werkzeuge or consult our specialists for application support. Test Pin M323.548 — Single precision test pin, Ø 5.48 mm, ±0.001 mm (Metav IndustryLine) The Test Pin M323.548 is a workshop‑grade precision measuring pin designed for end‑dimension verification and fixture checking in inspection and production environments. Workshop‑grade precision design Diameter 5.48 mm with ±0.001 mm accuracy Solid special‑steel construction Supplied in protective transport case Precision where tight tolerances decide produce quality The measuring probe offers ±0.001 mm nominal accuracy on a Ø 5.48 mm gauge, delivering the fine repeatability required for end‑dimension control and high‑precision jig checks. Such tight tolerance reduces measurement uncertainty in pass/fail decisions and supports consistent assembly quality. The short, rigid form factor and the 50 mm overall length make this probe particularly suited to small‑format gauges and fixture interfaces where minimal deflection is essential for reproducible results. Robust construction built for everyday workshop use Manufactured from special steel, the probe combines surface hardness and dimensional stability with a compact mass of 0.012 kg, minimising inertia during handling and mounting. The workshop execution emphasises durability under frequent use: the material choice and finish reduce wear on contact faces and preserve nominal dimensions over long service intervals. This construction supports reliable tactile measurements and prolonged service life in production and toolroom environments. Simple integration into inspection fixtures and gauges The single‑probe design allows straightforward incorporation into plug gauges, depth checks and go/no‑go fixtures. As a direct‑measuring element for end dimensions, the probe serves as a precision reference in comparative tests and calibration benches. The controlled diameter and consistent seating make it compatible with standard fixture bores and hardened contact surfaces, enabling repeatable positioning and fast inspection cycles without complex alignment procedures. Practical handling and secure delivery for immediate use With a 50 mm length and a compact diameter, the probe is easy to handle during installation and exchange; its low weight reduces strain during repetitive tasks. Delivery includes a protective transport case to prevent damage in transit and storage, ensuring the gauge arrives ready for immediate use. The compact packaging supports safe workshop logistics and reduces the risk of unintentional surface damage before installation. For reliable short‑range measurement elements from Metav IndustryLine, contact Metav Werkzeuge for order placement and application advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific fixtures and inspections Technical Data Article number: M323.548 SKU: M323.548 GTIN: 4061905059865 Manufacturer: Metav IndustryLine Material: Special steel Version: Workshop execution Facts Diameter: 5.48 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.012 kg Special features Supplied in protective transport case Single probe for end‑dimension checking Workshop‑grade design for frequent use FAQ What is the stated dimensional accuracy of this test pin? The Test Pin M323.548 is specified with a tolerance of ±0.001 mm, suitable for fine end‑dimension verification and precision fixture use. Which material is used and how does it affect durability? Constructed from special steel, the probe provides enhanced surface resistance and dimensional stability, promoting long service life under workshop conditions. Is the probe suitable for use in standard plug gauges and fixtures? Yes, the compact diameter and consistent seating geometry make the probe appropriate for integration in plug gauges, go/no‑go fixtures and comparative inspection setups. How is the item delivered to ensure safe handling? The probe is supplied in a protective transport case to avoid transit damage and to keep the contact face secure until installation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.49mm Gauge Pin Length 50 mm ±0.001 mm Workshop Version - Metav IndustryLine
Take advantage of the combination of micrometre-level accuracy, compact design and robust workshop construction to ensure reproducible inspection results; order the gauge pin directly via Metav Werkzeuge or contact the technical consultants for application advice. Metav IndustryLine Gauge Pin M323.549 — Ø 5.49 mm, ±0.001 mm, Length 50 mm A Metav IndustryLine gauge pin M323.549 designed for precision end‑measure checks and tight‑tolerance inspection tasks in workshop and production environments. Micrometre accuracy ±0.001 mm Workshop version for robust handling Solid special steel construction Single precision gauge pin Accuracy that secures measurement confidence The core advantage of this gauge pin is its ±0.001 mm tolerance, which corresponds to a one‑micrometre level of accuracy and supports high‑precision acceptance tests and go/no‑go inspections. Such a tight specification reduces measurement uncertainty during critical checks and enables repeatable, documented results when used as a reference or transfer standard. The compact diameter combined with a length of 50 mm keeps thermal mass low and shortens stabilisation time, benefiting throughput in serial inspection tasks. Robust construction for dependable workshop use Manufactured from special steel, the pin is finished to a high standard to resist wear in frequent use while preserving the measured geometry. The workshop version designation indicates an emphasis on mechanical resilience and handling ergonomics rather than delicate laboratory packaging, which suits bench inspection, fixture set‑up and routine maintenance tasks in metalworking and toolrooms. The modest mass supports rapid placement and positioning without adding measurement artefacts from excessive weight. Practical performance and integration in inspection routines As a single precision gauge pin, this component is well suited for bore checking, gauge‑block interfaces and position referencing in fixtures. The Ø 5.49 mm size fits small bores and tight seats where larger pins would be unsuitable. When used together with calibrated masters or inside precision jigs, the pin contributes to a reproducible inspection chain; traceability can be achieved by recording serial and batch details during quality control procedures. The design supports efficient exchange in modular fixtures and quick verification cycles on the shop floor. Contact Metav Werkzeuge today to arrange supply of the Metav IndustryLine M323.549 gauge pin and to discuss suitable inspection workflows with our specialists Technical Data Article number: M323.549 Manufacturer: Metav IndustryLine GTIN: 4061905059872 Core data Diameter: 5.49 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.012 kg Special features Workshop version Material: Special steel Single precision gauge pin High‑precision finish FAQ What is the declared tolerance of this gauge pin? The declared tolerance is ±0.001 mm for the Metav IndustryLine gauge pin M323.549, providing micrometre‑class accuracy for tight tolerance inspections. Which materials is the pin made from and why does that matter? The pin is made from special steel, chosen for wear resistance and dimensional stability; Metav IndustryLine specified this material to keep surface integrity and longevity under frequent contact use. For which typical tasks is this gauge pin intended? Typical tasks include small‑bore checking, fixture referencing and end‑measure verification where a Ø 5.49 mm reference is required and micrometre accuracy is essential. Is this product suitable for production‑line interchangeability checks? Yes, the M323.549 is suitable for production interchangeability and rapid go/no‑go checks thanks to its tight tolerance and compact length, which speed up handling and repeatability. Does the specification indicate any special surface finish or treatment? The listing states a high‑precision finish consistent with workshop use; detailed surface treatments are not specified beyond the material and workshop designation Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.4mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of micrometre-level accuracy and compact handling for reliable end‑measurements; the combination of ±0.001 mm tolerance and a Ø 5.40 mm, 50 mm profile supports tight fit checks and fixture set‑up. Order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.540 — Metav IndustryLine, Ø 5.40 mm, ±0.001 mm, 50 mm The gauge pin M323.540 is a single test pin designed for precision end‑measurements and fixture alignment in workshop environments. Workshop version, robust construction Tolerance ±0.001 mm for micrometre accuracy Diameter Ø 5.40 mm, precise fit Length 50 mm for compact handling Precision that reduces uncertainty The instrument delivers ±0.001 mm repeatability, enabling measurements at the micrometre level for critical checks. Built as a single test pin, it is intended where minimal clearance and exact seating are required; the fine tolerance reduces ambiguity in go/no‑go verifications and ensures consistent results when used for end‑mass checks or as a reference mandrel. This focus on measurable accuracy supports efficient quality control processes and simplifies pass/fail decisions on the shop floor. Designed for hard use in workshop routines Manufactured from special steel, the component combines wear resistance with a compact geometry that eases handling during repeated operations. The workshop version designation indicates practical design choices such as firm seating and durable surface finish, which extend service life under frequent insertion and removal. At a 50 mm length the pin is long enough to stabilise the measured part yet short enough for quick, single‑handed positioning in fixtures and measuring jigs. Versatile applications across small precision tasks The pin is suitable for end‑dimension inspection, fixture set‑up, pin gauges in alignment procedures and verification of bores and seats where a precise diameter is required. Its Ø 5.40 mm diameter provides a defined reference for fit testing and for establishing datum relationships in assemblies. Where interchangeability and exact fits are necessary, this component acts as a reliable mechanical reference that complements dial indicators, micrometres and bench comparators. Procurement confidence and workshop integration The compact mass (approx. 0.012 kg) and single‑piece supply make the pin straightforward to stock and deploy. Supplied as an individual test pin, it integrates with existing inspection workflows without the need for special adapters. Metav IndustryLine’s product range is positioned to bridge affordability and industrial‑grade quality, offering dependable parts for routine metrology tasks and reducing the need for repeated rework due to measurement uncertainty. Contact Metav Werkzeuge for tailored advice on using the M323.540 gauge pin in measurement routines and to arrange procurement from stock at Emmerich Technical Data Article number: M323.540 SKU: M323.540 GTIN: 4061905057953 Manufacturer: Metav IndustryLine Facts Diameter: 5.40 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.012 kg ECLASS: 21170231 Special features Material: special steel Workshop version Single test pin Category: Messstifte FAQ What tolerance does this gauge pin offer? The gauge pin M323.540 is specified with a tolerance of ±0.001 mm, providing micrometre‑level accuracy for precise fit and end‑dimension checks. Which material is used for the pin? The component is made from special steel, selected for wear resistance and durability in repeated inspection and fixture applications. For which tasks is this test pin suitable? Typical uses include end‑measurement verifications, fixture and jig alignment, go/no‑go fit testing and verification of bore seats where an exact diameter reference is required. What are the exact dimensions and mass of the pin? Diameter is 5.40 mm, length 50 mm and mass approximately 0.012 kg for the M323.540 gauge pin from Metav IndustryLine. Is this pin supplied as a single unit or in sets? The product is supplied as a single test pin (individual item), intended for direct integration into inspection and fixture procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.51mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
This compact gauge pin combines ultra‑fine tolerancing with a robust workshop build: ±0.001 mm tolerance on a 5.51 mm diameter and a 50 mm working length ensure reliable end‑dimension checks and repeatable inspection results. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.551 — precision test pin, 5.51 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.551 is a precision test pin designed for end‑dimension verification and rapid go/no‑go checks in production and workshop metrology. Diameter 5.51 mm with ±0.001 mm tolerance 50 mm length for compact assemblies Special steel for wear resistance Workshop execution with transport case Measure critical diameters with guaranteed repeatability The main strength of this test pin is its high positional accuracy: a diameter of 5.51 mm held to ±0.001 mm provides significantly tighter control than typical workshop gauges. For incoming inspection, assembly checks or final inspection of turned and ground parts, this level of precision reduces uncertainty and supports consistent quality decisions. The compact geometry and low mass contribute to stable contact conditions, improving repeatability in serial checks. Built for frequent use in workshop environments Designed as a workshop execution, the pin balances precision and robustness. The 50 mm length is long enough for reach in many fixtures yet short enough to avoid flexing during hand or fixture probing. Supplied in a protective transport case, the item is protected in storage and on the workbench, making it practical for routine inspection tasks in manufacturing cells and tool rooms where handling and movement are frequent. Material choice that extends service life Manufactured from special steel, the pin resists wear and surface damage that would otherwise affect dimensional fidelity. The hard, precisely finished tip preserves the nominal diameter over repeated use, maintaining measurement confidence and reducing the need for frequent replacement. For applications where surface finish or lubricant residue is present, the material and finish combination minimises adhesion and eases cleaning between measurements. Practical benefits for quality control and process stability Integrating the pin into sampling routines speeds inspection cycles and supports statistical process control: fewer ambiguous measurements mean faster decision loops and lower scrap rates. The combination of a defined nominal diameter, tight tolerance and compact form factor makes the component suitable as a reference gauge in fixture setups or as a go/no‑go element in manual checking. Traceable identification via SKU/GTIN streamlines inventory and calibration records. For precise end‑dimension verification order the Metav IndustryLine gauge pin via Metav Werkzeuge; our consultants can advise on integration into inspection routines — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.551 SKU: M323.551 GTIN: 4061905059896 ECLASS: 21170231 Facts Diameter: 5.51 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.012 kg Special features Material: special steel Workshop execution Supplied in transport case Single test pin for end‑dimension checks FAQ What tolerance does the gauge pin offer and for which tasks is it suitable? The gauge pin provides a tolerance of ±0.001 mm, making the M323.551 ideal for precise end‑dimension verification, fixture checks and repeatable go/no‑go inspections in production environments. Is the M323.551 appropriate for use in assembly fixtures? Yes, the 50 mm length and compact form factor of the M323.551 allow integration into assembly fixtures and jigs where a precise reference diameter is required. What is the material and how does it affect longevity? The pin is made from special steel, chosen for wear resistance and dimensional stability; this helps maintain the nominal diameter and extends service life under routine inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.52mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version, Special Steel in Case - Metav IndustryLine
Take advantage of the combination of workshop-grade construction, ±0.001 mm tolerance and a compact 50 mm length for reliable end‑dimension checks and repeatable fixturing. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.552 Gauge pin — single precision pin, Ø 5.52 mm, ±0.001 mm (Metav IndustryLine) The M323.552 is a single gauge pin engineered for end‑dimension verification and fixture setting in inspection and production environments. Workshop‑grade design for daily use Diameter 5.52 mm with fine tolerance Accuracy ±0.001 mm for repeatable checks 50 mm hardened length for firm seating High‑precision checks that reduce rework and throughput loss A compact, single gauge pin delivers a direct advantage in quality control: consistent reference dimensions reduce rework and speed up inspection cycles. The Ø 5.52 mm nominal diameter with a ±0.001 mm tolerance provides a measurement basis that meets tight end‑dimension requirements, making the pin suitable for precision gauging and go/no‑go verification. Explained plainly: tighter tolerance on the reference part lowers uncertainty in subsequent measurements, which supports faster decisions on conformity and reduces production stoppages. Robust construction for reliable, repeatable performance Manufactured from special steel, the pin combines wear resistance with stable geometry over many cycles. The 50 mm length gives a secure anchoring in fixtures and allows reliable engagement in bores or jigs without excessive overhang. The solid build minimises elastic deformation during handling, ensuring that each contact reproduces the intended nominal size. These mechanical characteristics mean fewer tool changes and lower downtime in routine inspection workflows. Practical integration into inspection and fixturing processes The single‑piece design suits manual and semi‑automated set‑ups where a defined reference is required for positioning, alignment or end‑dimension checks. Traceability is supported via the item identifiers and GTIN for inventory and quality records, aiding systematic replacement and calibration planning. Where tight repeatability is essential, use this pin as a fixed reference in fixtures or as a portable reference gauge for quick conformity checks on incoming parts. Contact Metav Werkzeuge for procurement advice or a tailored quote for the Metav IndustryLine M323.552 gauge pin and secure the right fit for inspection and fixture tasks. Technical Data Article number: M323.552 GTIN: 4061905059902 Weight: 0.012 kg Material: Special steel Designation: Single gauge pin Facts Nominal diameter: 5.52 mm Length: 50 mm Tolerance/accuracy: ±0.001 mm Label: Prüfstift, einzeln, 5.52 mm Special features Workshop execution Single‑piece construction Suitable for end‑dimension checks Compact format for fixture mounting FAQ What accuracy can be expected from this gauge pin? The M323.552 is specified with an accuracy of ±0.001 mm, providing high repeatability for end‑dimension checks and precision fixturing. Is the pin suitable for use in fixtures and jigs? Yes. The single‑piece construction and 50 mm length make the pin well suited to fixed fixtures, alignment tasks and portable reference checks in workshop environments. What material is the pin made from and how does that affect wear? The pin is made from special steel, chosen for its combination of hardness and dimensional stability, which improves wear resistance and ensures consistent contact geometry over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.53mm Gauge Pin ±0.001mm Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop durability, sub-micron accuracy and compact handling for reliable end-dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.553 — single test pin, 5.53 mm diameter, ±0.001 mm (Metav IndustryLine) The gauge pin M323.553 is a single, high-precision test pin for end-dimension verification in workshop and inspection environments. Diameter tolerance ±0.001 mm Workshop version with robust finish Length 50 mm for stable handling Supplied in a transport box Precision where minimal deviation matters A tight tolerance of ±0.001 mm on a nominal 5.53 mm diameter turns small differences into reliable decisions during quality control. This accuracy reduces uncertainty in pass/fail checks and supports repeatable measurement processes on assembly lines and inspection benches. The high-resolution specification is particularly valuable in fine mechanical and precision engineering contexts where component fit and functional clearances depend on consistent diameters. Compact, rugged format for everyday inspection With a 50 mm length in a workshop-grade design, this single test pin combines handling stability with space-efficient storage. The shorter, rigid form factor minimises flex during placement and speeds up routine checks without elaborate fixturing. Delivery in a transport box protects the measuring surface during handling and shipping, ensuring the gauge arrives ready for immediate use in shop-floor situations and bench-top inspection tasks. Materials and handling that sustain accuracy Manufactured from special steel, the pin is engineered to retain form under regular use while offering corrosion resistance appropriate for workshop conditions. The low mass of 0.012 kg contributes to easy manipulation when performing sequential measurements yet is sufficient to provide tactile feedback during seating. A well-machined contact surface supports reproducible positioning and reduces influence from handling variations. Practical fit in inspection workflows Designed for end-dimension checks, this single test pin integrates simply into existing measurement sequences: it serves as a reference for plug-type verification, visual gauge routines or manual comparator setups. The compact design suits use at stations for quick acceptance testing and small-batch inspections, supporting throughput without compromising on measurement certainty. The straight, certified geometry eases fixture mounting when longer-term monitoring or comparative studies are required. Purchase or request specification guidance from Metav Werkzeuge for precision end-dimension control with the M323.553 gauge pin, delivered protected and ready for workshop use Technical Data Article number: M323.553 GTIN: 4061905059919 Brand: Metav IndustryLine Category: Gauge pins Core dimensions Diameter: 5.53 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.012 kg Special features Material: special steel Workshop version for robust handling Supplied in a transport box for protection Intended for end-dimension checks FAQ Is the diameter tolerance really ±0.001 mm? Yes. The specification lists a tolerance of ±0.001 mm for the M323.553 gauge pin, making it suitable for fine-dimension verification. What are the physical dimensions of the pin? The pin has a diameter of 5.53 mm and a length of 50 mm; weight is approximately 0.012 kg. Is the item supplied individually or in sets? The product is supplied as a single test pin (single unit) under the SKU M323.553. How is the pin packaged for transport? The gauge pin is delivered in a transport box to protect the measuring surface during shipment and handling. For which type of checks is this pin intended? The pin is designed for end-dimension checks and routine workshop verification tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.54mm Test Pin, Single, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial-grade ±0.001 mm accuracy, a precise 5.54 mm diameter and a compact 50 mm length for reliable end‑measure inspections. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for batch supply and application advice Gauge Pin M323.554 — 5.54 mm, ±0.001 mm precision (Metav IndustryLine) The Gauge Pin M323.554 is a single inspection pin designed for precise end‑measure and dimensional checks in production and quality‑control environments Precision tolerance ±0.001 mm Diameter 5.54 mm, ground finish Length 50 mm for end‑measure checks Supplied individually for selective use Consistent dimensional control reduces rework and inspection time The plug‑style inspection pin delivers repeatable dimensional references thanks to its ±0.001 mm manufacturing tolerance and accurately finished 5.54 mm diameter. In serial inspection and jig checks, a consistently produced datum pin shortens cycle times by reducing measurement uncertainty and limiting part rework. The compact 50 mm length suits confined gauges and portable test fixtures, allowing quick insertion and removal during routine checks. This combination of tight tolerance and compact form supports stable results across multiple inspection points without changing measuring procedures. Durable construction for workshop use and routine handling Manufactured in special steel, the pin is intended for hands‑on workshop environments where robustness and dimensional stability are required. The workshop version designation reflects practicality: individual supply simplifies inventory control and selective replacement when wear occurs. The material choice and precision finish ensure long service life under normal inspection loads, while the single‑piece delivery supports calibration cycles and controlled part rotation without unnecessary surplus stock. Seamless integration into inspection workflows and inventory Designed as an inspection component, the pin fits into existing gauge blocks, test rigs and custom fixtures to serve as a reliable reference for end‑measure verification. Clear traceability (SKU M323.554, GTIN listed in the technical data) eases stock management and procurement. Performance‑driven features yield measurable efficiency gains: fewer measurement disputes, faster pass/fail decisions and a reduction in corrective machining. For tailored batch quantities or specification checks, Metav Werkzeuge provides application advice and procurement support to align gauge supply with production needs Contact Metav Werkzeuge for advice on batch orders, compatibility with existing gauges or assistance selecting the correct inspection pin for specific end‑measure applications Technical data Article number: M323.554 SKU: M323.554 GTIN: 4061905059926 Weight: 0.012 kg Material: Special steel Facts Diameter: 5.54 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Special features Workshop version Supplied individually Suitable for end‑measure inspection Compact plug‑style form for fixtures FAQ What is this gauge pin primarily used for? The M323.554 gauge pin is intended for end‑measure and dimensional checks in production and inspection fixtures, acting as a precise reference pin for pass/fail and comparative measurements. Does the pin come with a calibration certificate? Standard delivery does not include a specific calibration certificate; the M323.554 is manufactured to the stated tolerance and can be incorporated into your calibration programme if formal traceability is required. Is the material suitable for routine workshop use? Yes, the pin is made from special steel, designed to withstand regular handling and to maintain dimensional stability under normal inspection loads. Can this pin be used in existing gauge blocks and fixtures? The compact 50 mm length and plug‑style geometry make it compatible with most gauge fixtures and custom jigs that accept 5.54 mm reference pins. How is inventory and reordering simplified for this part? The M323.554 is supplied individually and referenced by SKU and GTIN for easy stock control and repeat ordering Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.55mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
High‑precision gauge pin combining ±0.001 mm tolerance, special steel construction and a compact 50 mm length for reproducible end‑measure checks; supplied as a single workshop‑grade pin in a protective transport box. Order directly via Metav Werkzeuge or consult our technical advisers for application support. Gauge Pin M323.555 – 5.55 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.555 engineered for fine end‑measurement and go/no‑go verification in workshop settings, featuring a 5.55 mm diameter and a 50 mm working length for reliable fit and reference measurements. High-precision ±0.001 mm tolerance 5.55 mm diameter in special steel 50 mm working length for end-measure checks Supplied in a protective transport box Precise dimensions for repeatable inspection results The M323.555 is a single gauge pin specified to ±0.001 mm (1 µm) tolerance, making it suitable where tight clearances and reproducible end‑measurements are required. The controlled diameter of 5.55 mm serves as a reliable dimensional reference in plug and hole checks, assembly verification and component sorting. The compact 50 mm length balances handling ease with sufficient engagement depth for many inspection tasks, while the low mass supports rapid manual positioning without inducing deflection. Material quality and workshop durability Manufactured from special steel, the pin is produced for a workshop environment and designed to withstand regular use in inspection benches and fixture stations. The workshop version finish provides a practical compromise between corrosion resistance and tactile handling for routine quality checks. Supplied as a single unit, the pin is delivered in a protective transport box to reduce the risk of damage during storage and transit and to maintain the measurement surface between uses. How the tolerance benefits production control A tolerance of ±0.001 mm places this gauge pin in the high‑precision segment of inspection tools, enabling confident decisions in go/no‑go checks and dimensional sorting. When used as a reference or a mating plug in inspection jigs, the pin reduces uncertainty in fit assessments and helps keep assembly processes within tighter process windows. Traceable geometry and consistent contact surfaces simplify integration into inspection procedures and comparators where micrometre‑scale accuracy matters. Practical handling, maintenance and integration The pin's straightforward geometry permits easy cleaning and light lubrication of contact zones to preserve measurement accuracy; gentle handling and storage in the supplied box prevent nicks and surface wear. Weighing approximately 0.012 kg, the gauge pin is compact for bench use and compatible with standard pin clamps and micro‑fixtures. For workshops seeking consolidated sourcing, Metav IndustryLine supplies this type as a single, robust inspection element suited to repetitive quality tasks. Contact Metav Werkzeuge today to specify the M323.555 gauge pin for precision end‑measure verification or to request application advice from our consultants in Emmerich. Technical Data Article number: M323.555 GTIN: 4061905060731 Manufacturer: Metav IndustryLine Facts Diameter: 5.55 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.012 kg Special features Workshop version Material: Special steel Supplied in protective transport box Single unit delivery FAQ What accuracy can be expected from this gauge pin? The gauge pin is specified to ±0.001 mm, offering micrometre‑level accuracy suitable for tight fit checks and repeatable end‑measurement tasks with the M323.555. Is the gauge pin supplied ready for use out of the box? The M323.555 is delivered as a single workshop‑grade pin in a protective transport box; handling and basic cleaning are recommended prior to first use. Which materials is this pin suitable for when checking parts? The pin itself is manufactured from special steel and is intended as a measurement reference for machined components across common engineering materials where dimensional verification at micrometre accuracy is required. Can this gauge pin be integrated into inspection fixtures? Yes. The simple cylindrical geometry and the 50 mm length make the pin straightforward to mount in pin clamps, jigs or manual inspection fixtures for go/no‑go and reference measurements. How should the gauge pin be stored to preserve accuracy? Store the pin in the supplied protective box in a stable, dry environment and avoid contact with abrasive surfaces; light lubrication can be applied sparingly to inhibit corrosion between uses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.56mm Gauge Pin Single ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
Take advantage of the combination of high metrological precision, robust workshop design and compact handling for reliable end‑measure verification; order the (M323.556) directly via Metav Werkzeuge or ask our consultants if needed. M323.556 — Single pin gauge 5.56 mm, ±0.001 mm (Metav IndustryLine) A M323.556 single pin gauge designed for precise end‑measure checks and fixture verification in workshop and inspection environments. High precision ±0.001 mm tolerance 5.56 mm diameter, precision ground 50 mm length, workshop version with case Accuracy that secures reproducible inspection results The M323.556 is engineered to deliver consistent gap and hole checking where reproducibility matters. With a stated ±0.001 mm tolerance and a nominal diameter of 5.56 mm, the gauge pin provides a clearly defined reference for go/no‑go procedures and assembly checks. The fine tolerance corresponds to submicrometre control across mating parts, reducing measurement uncertainty and supporting tighter process control in series production or sample inspection. Robust design to keep workshop processes running Constructed from special steel in a dedicated workshop version, the pin gauge stands up to everyday handling without compromising accuracy. The 50 mm length offers practical insertion depth for most bench and fixture tasks while remaining easy to handle; the low mass also minimises operator fatigue during repetitive checks. Delivered in a protective case for transport and safe storage, the item is prepared for workshop use and routine inspection sets, reducing the risk of damage between operations. Integrates simply into quality workflows and tooling sets As a precision pin gauge, this item suits end‑measure verification, fixture setup and gauge‑making tasks where a stable reference diameter is required. The small form factor makes it straightforward to include in inspection trays or gauge blocks, and the traceable identifier GTIN 4061905060748 supports inventory tracking and procurement. Metav’s stock and logistical presence in Emmerich ensure steady supply and simplified replacement planning for production environments that demand continuity. Contact Metav Werkzeuge today to specify the M323.556 for inspection kits, confirm availability at Emmerich and arrange delivery directly from stock. Technical data Article number: M323.556 GTIN: 4061905060748 Brand: Metav IndustryLine Facts Diameter: 5.56 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.012 kg Special features Material: Special steel Workshop version Supplied in protective case ECLASS: 21170231 FAQ What tolerance does the pin gauge provide and what is it suitable for? The M323.556 single pin gauge from Metav IndustryLine provides a tolerance of ±0.001 mm and is suitable for end‑measure verification, fixture checks and precise go/no‑go assessments in workshop and inspection contexts. Is calibration information included with this item? No calibration information is stated in the product data for the M323.556; the listing does not specify delivery with a calibration certificate. How is the pin gauge protected during transport? The M323.556 is supplied as a workshop version with a protective case for transport and safe storage to reduce the risk of damage. Can the gauge be integrated into existing inspection sets? Yes, this precision pin gauge is compact and intended for easy inclusion in inspection trays, gauge sets and fixture tooling for routine dimensional checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.57mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Combine sub-micron repeatability, workshop-grade robustness and a compact 5.57 mm diameter for reliable end-measurements; order the test pin directly via Metav Werkzeuge or speak with our consultants for specification advice. Test pin M323.557 – single gauge pin 5.57 mm, ±0.001 mm (Metav IndustryLine) The Test pin M323.557 is a workshop-grade single gauge pin designed for precise end-measurements and go/no-go checks in precision assembly, quality control and small-part inspection. ±0.001 mm measurement tolerance Nominal diameter 5.57 mm 50 mm length in special steel Workshop version supplied with transport case Precision that reduces rework and speeds inspection cycles A compact gauge pin with a ±0.001 mm tolerance delivers measurable advantages on the shop floor: fewer false rejects, faster pass/fail decisions and predictable fit checks during assembly. Made from special steel, the pin keeps dimensional stability under frequent use and supports repeatable seating in gauges and fixtures. The short 50 mm length helps to minimise bending and handling error, which is especially valuable for rapid sampling in production runs. Micro-class size for fine-mechanical applications With a nominal diameter of 5.57 mm, the component sits in the micro measurement class (maximum range up to 100 mm), offering the stiffness and handling benefits required for watchmaking, small housings and precision connectors. The compact geometry provides good access to confined bores while remaining easy to seat and remove. The single-piece design simplifies traceability and reduces the number of moving parts in inspection routines. Practical workshop design for everyday reliability The workshop version construction focuses on serviceability and robustness rather than laboratory fragility. Surface finish and material selection ensure stable contact conditions during repeated insertions. Supplied in a protective transport case, the pin is protected during storage and transit, which helps maintain accuracy and extends service life. The lightweight 0.012 kg mass also makes the pin convenient for handheld inspection tasks. Integration into measurement workflows and benefits Use the pin for end-stop measurements, go/no-go fitting checks and fixture set-up where a deterministic reference diameter is required. The precise tolerance reduces uncertainty in pass/fail thresholds and supports higher throughput in inspection processes by cutting decision time. As a single, traceable gauge element, it is suitable for both spot checks and routine quality control, offering a straightforward route to improved process stability. For procurement or technical clarification regarding the M323.557 test pin, contact Metav Werkzeuge in Emmerich to arrange supply or a detailed specification discussion Technical data Article number: M323.557 GTIN: 4061905060755 Label: Prüfstift, einzeln, 5,57mm, +/- 0.001 mm Länge 50 mm Manufacturer brand: Metav IndustryLine Facts Nominal diameter: 5.57 mm Length: 50 mm Tolerance / accuracy: ±0.001 mm Weight: 0.012 kg Special features Material: special steel Version: workshop execution Delivery: protective transport case included Typical use: end measurements, fitting checks FAQ What inspection tasks is this gauge pin suited to? The M323.557 test pin is intended for end-measurements, go/no-go fitting checks and fixture set-up where a 5.57 mm reference diameter with ±0.001 mm tolerance is required. Is the pin suitable for repeated shop-floor use? Yes, the workshop execution and special steel construction make the M323.557 robust enough for frequent insertions and routine quality-control sampling. How does the nominal diameter affect application choice? At 5.57 mm the pin falls into the micro-class range for fine-mechanical work; it is therefore appropriate for small bores, connectors and precision components where access and stiffness matter. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.58mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the high repeatability of a precision probe with ±0.001 mm tolerance and a compact 5.58 mm diameter for reliable end‑measure checks; order the inspection pin directly via Metav Werkzeuge or contact the consultants for application advice. M323.558 Inspection Pin — 5.58 mm, ±0.001 mm (Metav IndustryLine) A M323.558 inspection pin engineered for accurate end‑measurement and gauging in workshop environments, offering a 50 mm gauge length and workshop‑grade robustness. Precision tolerance ±0.001 mm Diameter 5.58 mm nominal Length 50 mm workshop version Delivered in protective transport case Repeatable end‑measure control for production workflows The probe provides repeatability that supports tight inspection routines: the ±0.001 mm tolerance makes it suitable for final dimensional checks and comparison gauges where deviations must be minimised. As a single‑piece inspection tool with a 5.58 mm nominal diameter and a 50 mm length, it is compact enough for confined fixture spaces but long enough to reach recessed features. The certified accuracy (stated tolerance) reduces uncertainty in pass/fail decisions and enables faster throughput in quality control without repeated set‑up. Built for daily workshop use with corrosion‑resistant construction Manufactured from special steel, the component is specified as a workshop version, delivering resistance to knocks and routine handling while maintaining measuring integrity. The material choice balances hardness and wear resistance so that contact surfaces keep geometry over many cycles. The item’s low mass (approx. 0.012 kg) aids in handling during manual gauging and minimises influence on lightweight fixtures. Delivery in a protective transport case preserves the polished measuring surface during storage and transport, ensuring the tool arrives ready for immediate use. Practical traceability and integration into inspection routines This inspection pin is designed to fit existing gauges and fixtures used for end‑measure verifications and is identified by GTIN 4061905060762 for inventory and traceability processes. The clear specification of diameter, length and tolerance allows it to be used as a reference member in assemblies, in fixture set‑up, or as a spare for precision measuring jigs. The concise specification list simplifies procurement and reduces mismatch risk: the combination of compact form and high accuracy supports both corrective and preventive quality regimes. Contact Metav Werkzeuge today to confirm the fit of this Metav IndustryLine inspection pin for your application or to reserve stock of items with ±0.001 mm accuracy Technical data Article number: M323.558 GTIN: 4061905060762 Description: Inspection pin, single, 5.58 mm, ±0.001 mm, length 50 mm Facts Diameter: 5.58 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.012 kg Special features Workshop version Material: special steel Delivered in protective transport case Suitable for end‑measure checks and fixture use FAQ What level of accuracy does the inspection pin provide? The inspection pin is specified with a tolerance of ±0.001 mm, providing the high accuracy required for fine end‑measure checks. Is the pin suitable for use in workshop fixtures? Yes, the workshop version is designed for routine fixture use and manual gauging while maintaining dimensional stability. What material is the pin made from? The pin is manufactured from special steel chosen for wear resistance and durability in inspection applications. What are the exact dimensions of the component? Diameter is 5.58 mm and length is 50 mm; the product is listed under article number M323.558. How is the item delivered to protect the measuring surface? The pin is supplied in a protective transport case to prevent damage during storage and transit. Can the pin be used as a reference member for traceability? Yes, with GTIN 4061905060762 the probe is suitable for inventory control and traceability within inspection routines. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.59mm Gauge Pin Single, ±0.001mm Accuracy, Length 50mm, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of extreme measurement accuracy, robust workshop design and easy integration into quality workflows to secure consistent end‑size control. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.559 — 5.59 mm, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) A precision gauge pin, Gauge pin M323.559, engineered for end‑size verification and routine inspection tasks in workshop and production environments. Workshop version for robust daily use Diameter 5.59 mm with ±0.001 mm accuracy 50 mm hardened special‑steel construction Single gauge pin for end‑size control Engineered accuracy for reliable end‑size verification The inspection pin offers a diameter of 5.59 mm with a guaranteed dimensional tolerance of ±0.001 mm, making it suitable for tasks where reproducible end‑size checks are decisive. Such a tight tolerance corresponds to sub‑millimetre inspection demands in precision assembly and final quality control. The fine accuracy reduces the need for secondary verification, shortening inspection loops and supporting a rational, efficiency‑oriented quality routine. Robust construction and practical handling for workshops Manufactured from special steel and finished for workshop durability, the pin combines corrosion resistance and wear performance with a convenient 50 mm length for stable seating in fixtures and holders. At approximately 13 g, the component is lightweight for easy handling while retaining sufficient mass for tactile location and repeatable placement. The workshop configuration is tailored to withstand frequent use, reducing downtime and replacement frequency in daily production. Seamless integration into measurement processes and stock management Delivered as a single inspection unit, the pin fits into established end‑size control workflows and can be used for direct plug checks or as a reference in fixture calibration. The product carries a GTIN for straightforward inventory tracking and traceability within procurement systems. Backed by Metav’s supply chain and quality assurance, the pin supports predictable reordering and consistent availability, helping maintain uninterrupted inspection regimes on the shop floor. For tailored application advice or to arrange supply of the Metav IndustryLine gauge pin M323.559 for precision end‑size control, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.559 GTIN: 4061905060779 Brand: Metav IndustryLine Facts Diameter: 5.59 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.013 kg Special features Material: special steel Workshop version for frequent use Single item delivery Category: Gauge pins FAQ What is the main application of this gauge pin? The gauge pin M323.559 is designed for precise end‑size verification and routine inspection tasks in workshop and production environments. Is the tolerance of ±0.001 mm suitable for assembly checks? Yes, the ±0.001 mm tolerance of this Metav IndustryLine gauge pin meets tight assembly and final inspection requirements where sub‑millimetre consistency is required. What material is used for the pin and how does it affect durability? The pin is made from special steel, a deliberate choice that enhances wear resistance and longevity for frequent workshop use. How should this pin be stored to preserve accuracy? Store the inspection pin in a clean, dry environment and protect it from impacts; the GTIN facilitates inventory tracking to ensure consistent handling and replacement scheduling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com