Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
5.84mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Grade, Special Steel - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, compact 5.84 mm diameter and robust special‑steel construction for reproducible final‑dimension checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.584 — Single precision pin, 5.84 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.584 is a workshop‑grade precision reference for end‑measure and go/no‑go gauging in inspection and assembly environments Workshop-grade precision design Diameter 5.84 mm with ±0.001 mm tolerance Hardened special-steel construction 50 mm cylindrical length for end measurements Reliable dimensional control for final inspection Precision and repeatability are central to efficient quality assurance. The compact cylindrical reference pin delivers a tight tolerance of ±0.001 mm, which makes it suitable for critical end‑dimension verification where small deviations lead to rework or scrap. By using a dedicated hardened reference pin, measurement variance due to instrument play or fixture misalignment is reduced, improving pass rates and shortening inspection cycles. This measurable performance supports faster decision‑making on the shop floor and in incoming goods inspection. Built for workshop durability and handling A workshop execution combines robustness with practical handling: the pin’s special‑steel composition offers wear resistance during repeated seating and extraction in jigs or test fixtures. The 50 mm length balances reach and rigidity, enabling secure engagement in blind bores and through‑holes without excessive deflection. The simple cylindrical form aids quick seating and visual verification, reducing handling time during serial checks and contributing to a smoother production flow. Clear functional advantages in metrology workflows Using a dedicated reference pin streamlines calibration transfers and comparative checks across fixtures. Its nominal diameter of 5.84 mm corresponds to common end‑measure steps, making it a practical choice for tolerance stacks and final assembly gauges. The precise manufacturing tolerance supports reproducible results when establishing reference points or validating bore sizes, thereby lowering measurement uncertainty and supporting traceable quality records for batch acceptance. Practical application and compatibility The compact, single‑piece design is intended for straightforward integration into inspection racks, plug gauges and fixture templates. Its workshop specification makes it suitable for routine end‑measure tasks and go/no‑go verification during assembly. For users seeking to align inspection practice with robust, repeatable controls, this precision reference pin offers a deterministic element to compare against micrometres, height gauges and calibrated master rings. Contact Metav Werkzeuge for tailored advice on using the M323.584 in inspection setups or to reserve stock; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.584 GTIN: 4061905060366 Brand: Metav IndustryLine Short description: Gauge pin, single, 5.84 mm, ±0.001 mm, length 50 mm Specifications Diameter: 5.84 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.013 kg eClass: 21170231 Materials and features Material: Special steel Workshop execution Category: Gauge pins (Messstifte) Application: End‑measure and reference gauging FAQ What level of accuracy does this gauge pin provide? The gauge pin M323.584 is manufactured to a tolerance of ±0.001 mm, making it suitable for high‑precision end‑measure verifications in workshop environments. Is the pin suitable for repeated use in jigs and fixtures? Yes, the special‑steel construction and workshop specification ensure wear resistance and durability for repeated seating in fixtures and assembly checks. Can this pin be used as a reference for bore verification? The 5.84 mm nominal diameter and tight tolerance allow the pin to act as a reliable reference for bore checks and go/no‑go comparisons in inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.85mm Precision Gauge Pin ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of extreme dimensional accuracy (±0.001 mm), a precise 5.85 mm diameter and robust 50 mm length for reliable end‑measurements; order the gauge pin directly via Metav Werkzeuge or consult the specialists if clarification is required. Metav IndustryLine gauge pin M323.585 — 5.85 mm, ±0.001 mm tolerance A gauge pin 5.85 mm designed as a single inspection pin for demanding end‑measurement and final inspection tasks in workshop environments. Diameter 5.85 mm, tolerance ±0.001 mm Length 50 mm for secure engagement Special steel construction Workshop version; supplied in transport case Precision that prevents rework and speeds inspection The core benefit of this inspection pin lies in its dimensional accuracy (±0.001 mm), which translates into repeatable reference measurements during final inspections. A tolerance at this level reduces uncertainty in go/no‑go checks and minimises downstream rework, improving throughput in quality control processes. The specification is particularly relevant where small clearances and fit tolerances determine assembly success; by using a pin with a verified diameter of 5.85 mm, measurement variations caused by worn or imprecise reference tools are significantly lowered. Design and material for stable, reproducible measurements Manufactured from special steel, the single pin offers a combination of surface hardness and geometric stability that supports repeated use in workshop conditions. The 50 mm length provides enough engagement for stable seating in gauges, fixtures or bore checks while remaining compact for handling. The workshop configuration ensures the component is suited to everyday inspection routines, and the inclusion of a protective transport case preserves the finished surface and prevents contamination during storage and transit. The pin’s low mass (approx. 0.013 kg) makes it easy to position without inducing measurement disturbance. Integration into inspection routines and typical applications This precision pin serves as a reference element for end‑measurements, final acceptance checks and fixture alignment. It is intended for uses where a single, accurately sized datum is required—examples include bore verification, mandrel checks and plug‑gauge substitutes in one‑off or small‑batch inspections. The straightforward, single‑piece design reduces handling steps and simplifies traceability in measurement logs. For procurement and inventory, the item is identified as M323.585 within the Metav IndustryLine range, facilitating rapid replacement and standardisation across inspection benches. Select the Metav IndustryLine gauge pin for exact final measurements and request supply or technical guidance through Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: M323.585 GTIN: 4061905060373 Label: Prüfstift, einzeln, 5,85mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 5.85 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.013 kg Special features Material: Special steel Single pin delivery Workshop design Supplied in transport case FAQ What is the exact tolerance of this gauge pin? The gauge pin M323.585 is specified with an accuracy of ±0.001 mm, suitable for high‑precision end‑measurements. Which material is used for the inspection pin? The pin is made from special steel, chosen for dimensional stability and resistance to wear in workshop conditions. Is the pin supplied individually or in sets? This article is supplied as a single inspection pin (single delivery), designated as M323.585 in the Metav IndustryLine. Can the pin be used for bore checks and fixture alignment? Yes, the 5.85 mm diameter and 50 mm length make the pin suitable for bore verification, mandrel checks and fixture alignment tasks. How is the pin protected during transport? The product is delivered in a transport case to protect the surface and maintain measurement integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.86mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
High-precision end-dimension checking with a tight ±0.001 mm tolerance and robust special-steel construction ensures reproducible inspection results; the compact 50 mm length eases handling on crowded benches. Order the precision test pin directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine precision test pin M323.586 – Single gauge pin, Ø 5.86 mm, ±0.001 mm tolerance The Test pin M323.586 is a single, high-precision gauge pin designed for reliable end-dimension checks and inspection tasks in workshop and production environments Tolerance ±0.001 mm Diameter 5.86 mm Length 50 mm Workshop-grade special steel Reliable measurement where micrometres matter A compact inspection tool with a stated tolerance of ±0.001 mm, this gauge pin delivers repeatable checks on end faces and small bores where traceable accuracy is required. The fine tolerance places the component in the high-precision range suitable for dimensional control during final inspection or incoming inspection routines. As a single-piece gauge pin, it provides a defined reference diameter of 5.86 mm, enabling quick verification of shafts, holes and mating parts without the need for complex fixtures. The measurable benefit is reduced rework and clearer pass/fail decisions in production. Durable design for busy inspection benches Manufactured in special steel and executed in a workshop-ready finish, the pin combines surface quality with the mechanical robustness expected on inspection benches. The 50 mm overall length offers sufficient engagement while keeping the tool easy to manoeuvre and store; the low mass supports fast handling during repetitive checks. The workshop execution reduces susceptibility to surface damage under normal use and supports reliable contact during tactile gauging. This balance of resilience and precision minimises downtime and preserves dimensional integrity across repeated measurements. Traceability and straightforward integration into quality systems Inventory and quality documentation are simplified by clear identifiers: the article is listed as M323.586 and linked to its GTIN for procurement and audit trails. The single-item supply format suits targeted replacement or selective expansion of a gauge set, while the plain geometry makes the pin compatible with common go/no-go fixtures, locating sleeves and bore gauges. Using a compact, defined-diameter reference aids consistent measurement methodology and supports statistical process control by reducing variable introduction at the inspection stage. For batch enquiries, availability or technical advice on integrating the Metav IndustryLine precision test pin M323.586 into inspection procedures, contact Metav Werkzeuge for tailored support and reliable supply from Emmerich Technical data Article number: M323.586 GTIN: 4061905061035 Category: Gauge pins Brand: Metav IndustryLine Facts Diameter: 5.86 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.013 kg Special features Material: Special steel Workshop version Single-item supply SKU: M323.586 FAQ What tolerance can be expected from this test pin? The test pin M323.586 is specified with a tolerance of ±0.001 mm, which supports high-precision end-dimension checks in inspection processes. Which materials is the pin suitable for verifying? As a dimensional reference, the Metav IndustryLine test pin M323.586 is used to check bores and mating parts made from metals and engineering plastics where a fixed diameter reference of 5.86 mm is required. How is the product identified for procurement and inventory? The product is listed as M323.586 and carries GTIN 4061905061035, simplifying ordering and traceability in quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.87mm Gauge Pin Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, micrometre-level tolerance and a robust workshop design for consistent end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.587 — 5.87 mm, ±0.001 mm, 50 mm length The gauge pin 5.87 mm is a workshop‑grade test pin for precise end‑dimension verification and fixture checks in inspection and production environments Workshop version design Diameter 5.87 mm precision Tolerance ±0.001 mm Length 50 mm for compact checks Consistent micrometre accuracy for critical measurements The gauge pin M323.587 delivers ±0.001 mm repeatability, making it suitable where very small dimensional deviations matter. Such a tolerance corresponds to micrometre‑class control and supports reliable pass/fail decisions on finished components. By offering a narrow diameter of 5.87 mm, the pin minimises play in small bores and registers, improving measurement certainty during end‑dimension checks and comparative inspections. Built for workshop use with durable materials Designed as a workshop version, the test pin is manufactured from special steel to withstand routine handling and contact with mating parts. The 50 mm length provides a compact geometry that is easy to seat in fixtures and gauges, while the low mass (approx. 0.013 kg) keeps handling comfortable and reduces the risk of displacement during manual checks. Delivery includes a transport case for safe storage and transit, protecting the pin from shocks and contamination. Practical integration into inspection workflows This test pin suits assembly‑line checks, incoming inspection and small‑part verification where quick, repeatable references are required. Used alongside calipers and bore gauges, the pin facilitates fast comparative checks and helps reduce measurement uncertainty in routine quality control. The robust finish and tight tolerance support consistent contact measurement, lowering rework rates and contributing to smoother production throughput. Identification, traceability and delivery scope The article is identified by SKU M323.587 and GTIN 4061905061370 for traceable procurement and stock management. No ISO 17025 calibration certificate is specified for this item; standard delivery comprises the test pin and a transport case as indicated. For applications requiring certified calibration, further options can be arranged through the supplier's calibration services. For workshop calibration and precise end‑dimension control, contact Metav Werkzeuge to arrange supply of the M323.587 gauge pin and to discuss suitable calibration options. Technical data Article number: M323.587 GTIN: 4061905061370 Label: Prüfstift, einzeln, 5,87mm, +/- 0.001 mm Länge 50 mm Numbers / Core technical data Diameter: 5.87 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.013 kg eClass: 21170231 Designs / Special features Material: special steel Workshop version (Werkstatt‑Ausführung) Delivery in transport case for protection SKU: M323.587 FAQ What is the declared tolerance of this gauge pin? The declared tolerance is ±0.001 mm for the gauge pin M323.587, suited to micrometre‑level checks. Which material is used for the test pin? The test pin is made from special steel, chosen for wear resistance and dimensional stability during routine workshop use. Is a calibration certificate included? No ISO 17025 calibration certificate is specified for this item; standard delivery includes the pin and a transport case. If a certified calibration is required, Metav Werkzeuge can advise on available services. Can this pin be used for bore and end‑dimension checks? Yes, the 5.87 mm diameter and 50 mm length make the pin suitable for bore checks, end‑dimension verification and fixture referencing in inspection routines. How is the article identified for ordering and stock control? Order and stock using SKU M323.587 or GTIN 4061905061370 for unambiguous identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.88mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of high repeatability, microscopic tolerance and workshop‑grade handling to simplify end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or request advice from our consultants. M323.588 gauge pin, single — 5.88 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) M323.588 gauge pin, single serves as a workshop‑grade precision mandrel for end‑dimension verification and fit checks in metrology and production control. Workshop-grade precision finish Diameter 5.88 mm, tolerance ±0.001 mm 50 mm special-steel length for durability Supplied in protective transport case Precision for repeatable end‑measure inspection The M323.588 is manufactured to a nominal diameter of 5.88 mm with a guaranteed ±0.001 mm tolerance, making it suitable for high‑accuracy end‑dimension checks and tight fit verification. Such a fine tolerance corresponds to micrometre‑scale control and reduces ambiguous fits during assembly; by providing a reliable reference shaft, the pin supports faster decision‑making on pass/fail inspections and helps to minimise rework in series production. The compact geometry and stable tolerance regime also make the pin a useful reference when setting up measuring fixtures or verifying bore sizes on small components. Robust workshop construction for dependable daily use Machined from special steel, the pin combines dimensional stability with a surface finish appropriate for repeated insertions. At approximately 0.013 kg and a 50 mm active length, the tool balances mass and handling to allow quick positioning without excessive play. The item is a workshop version, designed to tolerate the rigours of a busy inspection bench, and it is supplied in a protective transport case to preserve its calibrated condition during storage and transit. This construction lowers the lifetime cost of inspection tooling by maintaining geometry over many cycles. Integration into inspection routines and quality documentation As a standardised reference element, the pin is useful across assembly, incoming inspection and final control stations where tight clearance checks are required. The simple, single‑element design facilitates rapid transfer measurements and compatibility with a wide range of fixtures and gauges. A clear article code and GTIN support inventory management and traceability in quality systems, while the compact format makes the pin straightforward to catalogue within inspection kits. For complex applications or batch planning, Metav IndustryLine documentation can be referenced to ensure the element matches existing inspection protocols. For reliable end‑dimension checks and efficient inspection planning, request the M323.588 gauge pin from Metav Werkzeuge in Emmerich or contact our technical advisers for application guidance Technical data Article number: M323.588 GTIN: 4061905061387 ECLASS: 21170231 Manufacturer: Metav IndustryLine Facts Diameter: 5.88 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.013 kg Special features Material: special steel Workshop version for daily inspection use Supplied in a protective transport case Application: end‑dimension checks / fit verification FAQ What tolerance does the gauge pin hold? The M323.588 gauge pin is manufactured to ±0.001 mm tolerance, providing micrometre‑level repeatability suitable for tight clearance checks. Which material is used for this gauge pin? This gauge pin is made from special steel, chosen for dimensional stability and wear resistance in workshop environments. Is the pin supplied ready for storage and transport? Yes, the pin is supplied in a protective transport case to preserve the measuring surface and geometry during handling. What is the intended application of this gauge pin? The tool is intended for end‑dimension checks and fit verification in metrology, assembly inspection and fixture set‑up tasks. How is the item identified for inventory and traceability? The article is identified by code M323.588 and GTIN 4061905061387 to support inventory control and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.89mm Gauge Pin Length 50mm ±0.001mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, sub-micron accuracy and compact handling for reliable inspection results; order this test pin directly via Metav Werkzeuge or contact our consultants for technical matching. Test pin M323.589 — precision 5.89 mm, tolerance ±0.001 mm, 50 mm length (Metav IndustryLine) A Test pin M323.589 is a workshop-grade cylindrical gauge designed for repeatable end‑measurements and fit checks in inspection and assembly jigs. Workshop version for daily use Diameter 5.89 mm with high fit accuracy Tolerance ±0.001 mm for fine inspection Supplied in transport case for protection Precision engineered for repeatable inspection results The pin is manufactured to a tight ±0.001 mm tolerance on a 5.89 mm diameter, delivering measurement certainty where tight fits and interchangeability matter. This level of control reduces rework and speeds up go/no‑go decisions on the shop floor; the small form factor and 50 mm length make the component easy to insert in gauges, fixtures or comparison blocks. The combination of close dimensional control and a compact footprint supports faster inspection cycles and fewer disputes over part conformity. Robust workshop design that withstands daily handling Built as a workshop version, the test pin uses special steel selected for wear resistance and dimensional stability under repeated use. Surface finish and material choice minimise fretting and scoring during contact with mating parts, extending service life and maintaining gaugeability. Delivered in a transport case, the pin arrives protected against knocks and corrosion during storage and transit, helping to preserve the calibrated geometry and ensuring it is ready for immediate deployment in production routines. Simple integration into inspection workflows and traceability As a single, dedicated test pin, the component fits directly into fixture bores, end‑measuring setups and manual gauge assemblies, promoting standardised checks across stations. The clear specification and traceable SKU allow documentation in inspection plans and tool lists, supporting quality records and audit trails. When consistent plug‑gauge behaviour and repeatable contact geometry are required, this precision pin provides a dependable reference for assembly and measurement tasks. For workshop inspection tasks, request the Metav IndustryLine test pin from Metav Werkzeuge and discuss suitability with our Emmerich team by calling +49 2822 7131930 or emailing info@metav-werkzeuge.com Technical details SKU: M323.589 GTIN: 4061905061394 Manufacturer: Metav IndustryLine Facts Diameter: 5.89 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.013 kg ECLASS: 21170231 Special features Workshop version Material: Special steel Supplied in transport case Single test pin FAQ What is the exact tolerance of the test pin? The Metav IndustryLine test pin (SKU M323.589) is specified with a tolerance of ±0.001 mm on the 5.89 mm diameter. Which material is used for this inspection pin? The pin is made from special steel, chosen for durability and stable contact geometry in workshop environments. Is a calibration certificate included with the pin? This workshop‑grade pin is supplied for immediate inspection use and does not include a calibration certificate as standard. How is the pin delivered to protect accuracy? The component is supplied in a transport case to protect the finished geometry during storage and transit. What applications suit this test pin? Typical uses include end‑measurements, fit checks in fixtures and manual gauge assemblies where a precise mating diameter and repeatable contact are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.8mm Gauge Pin ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Precision of ±0.001 mm, a compact 50 mm length and special steel construction ensure repeatable end-measurements in workshop environments; order the pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.580 gauge pin — 5.80 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The M323.580 is a workshop-grade cylindrical gauge pin intended for accurate bore verification, fixture setting and end-measurement tasks in production environments. Workshop-grade special steel Diameter 5.80 mm, tolerance ±0.001 mm Length 50 mm for end-measurements Supplied in transport case Accurate, repeatable checks for routine metrology Aiming for measurable reproducibility, this cylindrical gauge pin delivers a declared tolerance of ±0.001 mm (±1 µm) on a nominal diameter of 5.80 mm, enabling fine verification of bore diameters and alignment features. The tight tolerance reduces uncertainty in pass/fail decisions and supports traceable in-process checks. In practice, the compact 50 mm shaft length provides a stable contact area for end-measurements while keeping handling straightforward and cycle times short. The precise dimensional data gives a sound basis for statistical process control and minimises downstream rework. Robust design and material for workshop conditions Designed as a workshop-grade tool, the pin is manufactured from special steel selected for wear resistance and dimensional stability under repeated use. The relatively low mass (approximately 0.013 kg) and solid construction reduce susceptibility to bending during insertion and retraction, preserving measurement integrity. Supplied in a protective transport case, the pin remains protected from contamination and mechanical damage during storage and transit, which helps maintain the declared surface condition and tolerance over many inspection cycles. These practical design choices translate directly into lower lifetime cost through reduced replacement frequency. Integration into quality workflows and fixture setup The cylindrical geometry and precise diameter make this pin suitable as a reference for setting up jigs, calibrating holders and checking bores in series production. As a single, traceable reference artefact, it simplifies go/no-go assessments when paired with standardised test procedures. The compact form factor supports easy interchange between manual inspection benches and automated stations where a simple cylindrical gauge is required. Supplied identification such as GTIN 4061905059469 and the article designation enable clear inventory control and integration into calibration schedules. Secure reliable ±0.001 mm workshop measurement by contacting Metav Werkzeuge for procurement and technical guidance on suitable inspection workflows and accessories Technical data Article number: M323.580 GTIN: 4061905059469 Label: Prüfstift, einzeln, 5,80mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 5.80 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.013 kg Special features Material: Special steel Workshop execution Supplied in transport case Category: Messstifte FAQ What is the declared tolerance of this gauge pin? The M323.580 gauge pin is specified with a tolerance of ±0.001 mm, suitable for high-precision workshop checks. Which material is the pin made from? The pin is manufactured from special steel designed for wear resistance and dimensional stability in workshop use. Is the gauge pin supplied with protection for transport? Yes, the M323.580 is supplied in a protective transport case to guard against contamination and damage. For which tasks is this gauge pin intended? The pin is intended for bore verification, fixture setting and end-measurement tasks in production and inspection environments. How does the M323.580 support quality processes? With its declared accuracy and traceable identification, the M323.580 serves as a reproducible reference for in-process checks and setup routines Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.91mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Benefit from micron-level control combined with a robust workshop design and compact length for reliable spot checks; the precise 5.91 mm diameter and ±0.001 mm tolerance ensure consistent inspection outcomes. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.591 — inspection pin, Ø 5.91 mm, ±0.001 mm (Metav IndustryLine) Gauge pin M323.591 is a precision-ground inspection pin intended for workshop measurement and dimensional verification in production and quality assurance environments. Workshop version for robust use Diameter 5.91 mm with ±0.001 mm accuracy Precision-ground surface for reliable fit Compact 50 mm length for stable positioning Micron-level accuracy that prevents rework The inspection pin delivers ±0.001 mm accuracy (equivalent to 1 µm), providing an objective reference for bore and hole checks where small deviations matter. Built with a nominal diameter of 5.91 mm, the pin is ground to tight tolerance and finished to provide repeatable contact geometry; this reduces the need for iterative adjustments during set-up and lowers scrap rates. The combination of fine tolerance and a short, rigid profile supports consistent alignment and verification in serial checks. Robust workshop design for everyday use Designed as a workshop version, the pin balances precision with durability. Manufactured from special steel, the component resists wear during repetitive insertions and is suited to routine inspection tasks on the shop floor. Its 50 mm length gives sufficient engagement for secure seating in jigs and fixtures while keeping the effective cantilever low, which helps preserve measurement integrity and improves handling in confined set-ups. Practical integration into quality workflows As a single-piece inspection tool, the pin is ideal for quick go/no-go verifications, alignment controls and end-mass checks in assembly operations. The precision-ground finish ensures stable seating and reduces measurement scatter, which speeds up throughput and supports statistical process control. Supplied under the Metav IndustryLine portfolio, the product benefits from a European quality filter and straightforward availability for maintenance spares or measurement kits. For application advice, availability or to secure workshop-ready precision components, contact Metav Werkzeuge—fast delivery from Emmerich and technical consultancy available on request Technical data Article number: M323.591 GTIN: 4061905061417 Manufacturer: Metav IndustryLine Facts Diameter: 5.91 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.013 kg Special features Material: Special steel Workshop version Precision-ground surface Single piece supply SKU: M323.591 FAQ What inspection tasks is this pin suited for? The gauge pin M323.591 is suited for bore checks, alignment validation and end-mass inspections where a tight reference diameter of 5.91 mm and ±0.001 mm accuracy are required. How precise is the diameter on delivery? The delivered inspection pin maintains a tolerance of ±0.001 mm, enabling micrometre-level repeatability for routine quality checks. Is the pin appropriate for repeated use on the shop floor? Yes. The Metav IndustryLine inspection pin is a workshop version made from special steel, designed for regular use in production environments without rapid wear. Can this pin be used as a setting master for fixtures? The precision-ground geometry and 50 mm length make the pin suitable as a setting master for many fixtures and gauging stations that accept a 5.91 mm reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.92mm Gauge Pin, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of micron-level accuracy, robust special-steel construction and compact handling for consistent dimensional control. Order the test pin directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Test pin M323.592 — workshop-grade precision test pin, Ø 5.92 mm, ±0.001 mm (Metav IndustryLine) The Test pin M323.592 is a single workshop-grade checking pin for end‑measurements and gauge applications, optimised for precise dimensional control in fixtures and inspection rigs. Workshop-grade execution Tolerance ±0.001 mm Diameter 5.92 mm precision 50 mm length for compact handling Micron accuracy for repeatable checks This workshop pin delivers ±0.001 mm tolerance, equivalent to a single‑micrometre resolution, which supports high‑precision verification tasks where reproducibility matters. The tight tolerance reduces measurement scatter when used as a reference or inspection master, making the pin suitable for end‑of‑line checks, gauge blocks or fixture validation. The combination of small form factor and high accuracy enables consistent pass/fail decisions in serial inspection without complex equipment. Built for robust workshop use Manufactured in special steel and specified as a workshop‑grade item, the pin withstands regular handling and routine measuring procedures. The 50 mm length keeps the pin easy to position while providing sufficient engagement for secure seating in fixtures. A protective case is supplied for transport, preserving the calibrated surface and preventing accidental damage during storage or transit, which helps maintain long‑term stability of the datum. Practical handling and integration The pin’s nominal 5.92 mm diameter and single‑piece design simplify installation into custom gauges, test jigs or comparison fixtures. Low mass and compact geometry reduce the risk of cantilever deflection in short‑span set‑ups, while the smooth working surface supports repeatable contact with mating parts. Where a reference with minimal play is required, this pin functions as a reliable datum component in both manual and semi‑automated inspection stations. Contact Metav Werkzeuge for tailored advice on integrating the M323.592 test pin into existing inspection fixtures or for procurement assistance from our Emmerich distribution centre. Technical data Article number: M323.592 GTIN: 4061905061424 Label: Test pin, single, 5.92 mm, ±0.001 mm, length 50 mm Facts Diameter: 5.92 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.013 kg Special features Workshop execution Special steel construction Supplied in protective case for transport Single test pin for gauge and fixture use FAQ What level of accuracy does this test pin provide? The test pin provides a tolerance of ±0.001 mm, suitable for micrometre‑class verification and repeatable dimensional checks in workshop and inspection environments. Is the pin suitable for use in gauges and fixtures? Yes. The M323.592 test pin is designed for integration into gauges and fixtures as a reference or checking element thanks to its controlled diameter and compact 50 mm length. What material is the pin made from and how does that affect durability? The pin is made from special steel, chosen to withstand routine handling and to maintain dimensional integrity during standard workshop use. Does the item include any transport protection? A protective case is supplied to preserve the pin during transport and storage, helping to prevent surface damage and maintain its measurement characteristics. Can this pin be used for high‑volume inspection processes? Its micron tolerance and compact form make it suitable as a reference component in repetitive inspection cycles and semi‑automated stations where consistent contact geometry is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.93mm Gauge Pin Length 50mm ±0.001mm Workshop Finish - Metav IndustryLine
Precise component checks benefit from the combination of a tight ±0.001 mm tolerance, a 5.93 mm diameter and a practical 50 mm length; the special-steel construction and workshop execution ensure reliable everyday use. Order the pin gauge directly via Metav Werkzeuge or ask our consultants if needed. Pin gauge, single, 5.93 mm — workshop pin gauge with ±0.001 mm tolerance and 50 mm length (Metav IndustryLine) Pin gauge, single, 5.93 mm is a compact inspection pin designed for high-precision dimensional checks and go/no-go verification in workshop and shop-floor environments. Workshop-ready precision ±0.001 mm tolerance Diameter 5.93 mm for tight-fit checks 50 mm length suitable for deep measurements Special-steel construction for durability Accuracy for functional verification and quality control A diameter of 5.93 mm combined with a tolerance of ±0.001 mm delivers the dimensional certainty required for functional fits and final inspection tasks. This level of accuracy reduces ambiguous pass/fail decisions when checking mating bores or precise housings; the narrow tolerance converts measurement data into actionable quality-control outcomes. The compact format and repeatable geometry make the gauge ideal for production sampling and incoming‑goods verification, where quick, reliable validation prevents downstream rework and saves processing time. Built for workshop routines and daily handling The workshop execution and special steel construction provide abrasion resistance and sustained dimensional stability under frequent use. At a nominal mass the pin minimises inertial effects during insertion and removal, helping keep measurements consistent across many cycles. Supplied in a protective plastic or wooden case for transport, the single-piece gauge is protected between uses to limit surface damage and preserve the critical diameter. The robust finish and handling-friendly length ensure compatibility with standard inspection benches and portable test setups. Practical integration into measurement workflows Designed as a straightforward verification tool, the inspection pin speeds up go/no-go checks and complements more complex measuring systems without adding process complexity. The compact form factor fits jigs, fixtures and V‑blocks, while the short overall length reduces the risk of bending when used manually. As a dedicated gauge pin, it supports rapid decisions during assembly, final inspection or tool set‑up, improving throughput and reducing scrap through prompt detection of out-of-tolerance conditions. Dependable supply and workshop confidence The single-piece format simplifies traceability and record keeping for routine checks. Metav IndustryLine builds on workshop-focused design principles to offer instruments that are practical, durable and easy to store. The pin’s combination of a tight tolerance, stable material and protective transport case means less downtime for replacements and fewer interruptions to production — a pragmatic choice for workshops aiming for consistent quality without overcomplicating inspection procedures. For workshop-ready, high-precision checks request technical advice or supply information from Metav Werkzeuge — fast delivery from Emmerich and expert consultation available Technical data Article number: M323.593 GTIN: 4061905061431 Label: Pin gauge, single, 5.93 mm, ±0.001 mm, length 50 mm Material: Special steel Facts Diameter: 5.93 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.013 kg Special features Workshop execution Delivered in plastic or wooden case for transport Single-piece gauge for end-measure checks Compact, low-mass pin for minimal insertion disturbance FAQ What level of accuracy does this pin provide? The pin gauge offers a ±0.001 mm tolerance, allowing the Pin gauge, single, 5.93 mm to be used for precision fit checks and final inspection tasks where tight dimensional control is required. Is the gauge suitable for repeated shop-floor use? Yes, the Metav IndustryLine inspection pin is a workshop execution made from special steel, designed to withstand frequent handling while maintaining its critical diameter. Does the product come protected for transport? The single-piece gauge is supplied in a protective plastic or wooden case for transport to preserve the surface and ensure continued accuracy during transfer and storage. Can this pin be used for bore verification and go/no‑go checks? The compact format and tight tolerance make this inspection pin well suited to bore verification, mating-fit assessments and quick go/no‑go decisions on the shop floor. Is the gauge appropriate for integration into jigs or fixtures? Its 50 mm length and low mass allow straightforward use in jigs, holders and portable inspection arrangements without introducing significant bending or handling error. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.94mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Achieve repeatable end-measurements with the workshop-grade M323.594 pin gauge: 5.94 mm diameter with a tight ±0.001 mm tolerance and a 50 mm usable length, supplied ready for secure transport. Order the pin gauge directly via Metav Werkzeuge or consult our specialists for application advice. Pin gauge M323.594 — workshop pin gauge, 5.94 mm ±0.001 mm, 50 mm length (Metav IndustryLine) The Pin gauge M323.594 is a compact, workshop-grade precision pin intended for end-measurements and dimensional verification in small to medium components Workshop-grade precision test pin Diameter 5.94 mm ±0.001 mm tolerance Length 50 mm for end-measurements Special steel, robust surface finish Supplied in transport case for protection Reliable dimensional verification for compact components The compact design delivers repeatable end-measurements where tight form and size control matter. With a nominal diameter of 5.94 mm and a declared tolerance of ±0.001 mm, the pin sits in the micro range of gauges suited to fine mechanical and small-part inspection. This level of accuracy supports high-confidence go/no‑go checking and dimensional spot checks, reducing uncertainty in assembly or inspection routines. The precision tolerance helps to maintain consistent fits and minimises rework in serial production. Robust handling and protection in workshop environments Built as a workshop version, the pin is manufactured from special steel for wear resistance and dimensional stability under regular use. The 50 mm length provides ample engagement for through‑and‑end measurement tasks while remaining easy to handle and index during inspection. Delivery in a secure transport case protects the gauge surface from damage and contamination, extending usable life and preserving calibrated condition during storage and transit. Practical integration into inspection workflows The pin gauge is optimised for rapid checks and complements existing plug and pin gauge sets or fixture checks used in machining and quality control. Clear identification with SKU M323.594 and GTIN facilitates stock management and traceability in internal quality systems. The combination of compact size, high tolerance and workshop robustness shortens inspection cycles and supports stricter acceptance criteria without complex setup. Use the gauge for verifying bore entries, positional checks and finishing operations where end-measurements define pass/fail decisions. Contact Metav Werkzeuge today for application guidance and local stock availability of the Metav IndustryLine pin gauge M323.594 — Metav Werkzeuge can advise on fitment, compatibility and delivery to your workshop in Emmerich and across Europe. Technical data Article number: M323.594 GTIN: 4061905062285 Manufacturer: Metav IndustryLine Material: Special steel Core measurements Diameter: 5.94 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.013 kg Special features Workshop version For end measurements Supplied in transport case High-precision tolerance ±0.001 mm FAQ What is the declared tolerance of this pin gauge? The pin gauge M323.594 is specified with a tolerance of ±0.001 mm for high-precision end-measurements. Which materials is the pin gauge suitable for checking? The gauge itself is made from special steel and is intended for dimensional verification of machined metal and precision components. Is the pin delivered protected for storage and transport? Yes, the gauge is supplied in a transport case to protect the measuring surfaces during storage and transit. Can this pin gauge be used for bore checking and fixture setting? The M323.594 is suitable for bore entry checks, fixture set-up and small-part verification where a compact, high-precision pin is required. How is the product identified for stock and traceability? Identification is via SKU M323.594 and GTIN 4061905062285 for integration into inventory and quality-control systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.95mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial-grade dimensional accuracy and compact form factor: a 5.95 mm diameter with ±0.001 mm tolerance and a 50 mm working length provide reliable reference measurements for inspection and setup tasks. Order the gauge pin directly via Metav Werkzeuge or consult the specialists for application advice. M323.595 — Gauge pin, single, 5.95 mm, ±0.001 mm tolerance The M323.595 is a single workshop-grade gauge pin designed for high-precision end measurements and fixture setting in production and inspection environments. Diameter 5.95 mm ±0.001 mm Length 50 mm workshop execution Made from special steel Single piece supply Precision where consistent results count This workshop-grade measuring element delivers a ±0.001 mm tolerance on a nominal 5.95 mm diameter, making it suitable where repeatable, high-resolution checks are required. As a hardened reference plug, the component reduces uncertainty in comparative gauges and fixture alignment; the tight tolerance supports efficient quality control and lowers the risk of rework by ensuring that mating parts and bores are verified against a stable datum. Robust design for routine inspection tasks Manufactured from special steel, the pin combines wear resistance with a finely finished measuring surface that preserves geometry over repeated use. The 50 mm length offers secure engagement in a wide range of jigs and inspection fixtures while keeping handling straightforward; the low mass supports quick positioning without detracting from dimensional stability. The workshop specification signals suitability for regular use in toolrooms and production benches where durability and practical handling matter. Traceability and process integration The single-piece format simplifies inventory control and traceability in inspection workflows. Identification via GTIN and article references enables clear logging in production records and simplifies procurement. Used as a reference for end measurements, the pin improves the consistency of setup procedures and feeds reliable data into downstream quality assurance processes, supporting better throughput and fewer inspection-related interruptions. Contact Metav Werkzeuge for supply coordination of the Metav IndustryLine gauge pins and for tailored advice on integrating the M323.595 into inspection routines — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.595 GTIN: 4061905058455 eClass: 21170231 Core specifications Diameter: 5.95 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.013 kg Materials & special features Material: Special steel Workshop execution Single gauge pin Label: Prüfstift, einzeln, 5,95 mm, +/- 0.001 mm Länge 50 mm FAQ What tolerance does the gauge pin offer? The gauge pin is specified with a tolerance of ±0.001 mm, suitable for high-precision inspection tasks associated with fine dimensional control. Which material is used for the pin? The pin is made from special steel and is supplied in a workshop execution that balances wear resistance with a precise measuring surface. For what applications is this pin intended? It is intended primarily for end measurements and fixture setting, where a compact, accurately sized reference plug is required. Is the item supplied as a single piece or in sets? This article is supplied as a single gauge pin in the described specification. How can the pin be identified for stock and traceability? Identification is possible via the article number M323.595 and GTIN 4061905058455, which support inventory and production record keeping. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.96mm Gauge Pin, ±0.001mm, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of ultra‑fine dimensional accuracy, robust workshop design and compact handling for consistent end‑measure checks; the 5.96 mm gauge pin achieves repeatable results and is supplied ready for safe transport in a protective case. Order this precision component directly via Metav Werkzeuge or consult the Metav advisers for specification matching. Gauge pin, single — 5.96 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The gauge pin, single, 5.96 mm, ±0.001 mm, 50 mm length is a workshop‑grade measuring pin intended for precise diameter verification and end‑measure tasks in production and inspection environments. Diameter tolerance ±0.001 mm 5.96 mm nominal diameter 50 mm overall length Special steel construction Supplied in a protective case Precise control where micrometres are not practical The Metav IndustryLine gauge pin M323.596 delivers a tight tolerance of ±0.001 mm, enabling reliable dimensional checks on bores, dowel holes and locating features where repeatability is essential. With a nominal diameter of 5.96 mm, the pin provides a defined reference for pass/fail checks and fixture set‑up without the need for continual adjustment. The narrow dimensional tolerance reduces the risk of scrap and rework by giving a verifiable standard against which internal diameters are assessed. In practice, the pin can be used as a reference mandrel during assembly checks or as a calibration aid for optical comparators and manual gauges, offering a simple, robust alternative to more complex measuring instruments for many routine inspection tasks. Robust design tailored to daily workshop use Constructed from special steel, this workshop variant is designed for everyday handling and retains dimensional integrity under regular use. The 50 mm overall length provides a comfortable working grip while limiting deflection during insertion, and the low mass of 0.013 kg makes handling effortless during repetitive checks. Surface finish and material choice contribute to wear resistance so that the gauge retains its specification over many cycles; repair and replacement intervals are therefore minimised, supporting efficient production workflows. Supplied in a protective case, the pin arrives ready for immediate use and safe transport between inspection stations, reducing the likelihood of transit damage and preserving accuracy. Practical applications and handling advice The pin is intended for end‑measure verification of bores and for use as a reference in fixture alignment and component assembly. Its nominal diameter suits tasks that require a fixed, measurable reference rather than a variable measuring instrument; when used together with feeler gauges or micrometres for complementary checks, it simplifies process control. Handling is straightforward: insert the pin gently into the feature to be checked, observe seating and freedom of fit, and record deviations against the specified ±0.001 mm tolerance. For long‑term reliability, store the pin in its protective case after use and avoid abrasive contact with harder materials that could alter the effective diameter. Contact Metav Werkzeuge for tailored technical advice and to secure the Metav IndustryLine M323.596 gauge pin with ±0.001 mm accuracy; Metav’s advisers in Emmerich can assist with specification checks and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.596 SKU: M323.596 GTIN: 4061905058462 Manufacturer: Metav IndustryLine Facts Diameter: 5.96 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.013 kg Special features Material: Special steel Workshop version Supplied in a protective case for transport Category: Gauge pins FAQ Is a calibration certificate included with the gauge pin? No calibration certificate is included by default with the Metav IndustryLine gauge pin M323.596. What is the declared accuracy of this measuring pin? The measuring pin carries a declared tolerance of ±0.001 mm, making it suitable for high‑precision diameter checks. For which tasks is this gauge pin most suitable? This pin is intended for end‑measure checks, bore verification, fixture set‑up and other applications requiring a fixed reference for internal diameters. How is the pin delivered and protected during transport? The pin is supplied in a protective case to prevent damage during transport and storage Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.97mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of exact diameter control, robust workshop construction and compact handling for reliable end‑measurements; order the M323.597 gauge pin directly via Metav Werkzeuge or consult our experts for application advice. Gauge pin, single, 5.97 mm, ±0.001 mm, 50 mm length — Metav IndustryLine workshop version Gauge pin, single, 5.97 mm, ±0.001 mm, 50 mm length is a precision test pin designed for exact end‑measurements in workshop and inspection routines, delivered as an individual piece for direct use in gauges and fixtures Workshop version, robust for daily use Diameter 5.97 mm with ±0.001 mm tolerance Length 50 mm for precise end‑measurements Special steel for enhanced wear resistance Consistent tolerances for reliable interchangeability The core benefit of this test pin is its dimensional certainty: a nominal diameter of 5.97 mm with a tolerance of ±0.001 mm provides repeatable reference geometry for end‑measurement tasks and plug‑gauge checks. Such tight control reduces reject rates and rework by ensuring mating parts and fixtures are verified against a stable standard. The numerical accuracy supports quality documentation and process stability in production and inspection routines. Workshop design that lasts through daily use Constructed from special steel and specified as a workshop version, the pin combines toughness with surface integrity to withstand frequent handling and insertion cycles. The 50 mm length offers practical engagement for end‑measurements and mounting in jigs while the low mass enables easy manipulation and fast inspection throughput. Robust material selection minimises surface wear, preserving the critical diameter and prolonging service life under normal workshop conditions. Traceable identification for efficient quality workflows Marked by SKU M323.597 and GTIN, the pin is straightforward to catalogue and integrate into existing inspection plans or inventory systems. Supplied singly, the component is suited for selective replacement or use as a reference master in fixture setups. Clear specification of diameter, tolerance and length simplifies documentation for incoming inspection, assembly checks and final control, supporting a rational, evidence‑based quality process. Choose Metav IndustryLine gauge pins for precise end‑measurements and durable workshop performance — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice or to order M323.597 directly Technical data SKU: M323.597 GTIN: 4061905058479 Diameter: 5.97 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.013 kg Material: Special steel Version: Workshop execution Core data Diameter (numeric): 5.97 Tolerance (numeric): 0.001 Length (numeric): 50 Weight (numeric): 0.013 Special features Single test pin delivery Eclass: 21170231 Intended use: end measurements / reference pin Story trigger: end measurements FAQ What is the nominal diameter and tolerance of this pin? The gauge pin has a nominal diameter of 5.97 mm and a tolerance of ±0.001 mm, specified for precision end‑measurement tasks. Is the pin suitable for regular workshop use? Yes, the Metav IndustryLine workshop version is made from special steel and is designed for robust daily handling and insertion cycles. How is the pin delivered and identified? The item is supplied individually and is identified by SKU M323.597 and GTIN 4061905058479 for easy inventory and documentation. Can this pin be used as a reference in fixtures and gauges? The dimensional stability and fine tolerance make the pin suitable as a reference master for fixture setups and plug‑gauge checks in inspection workflows. Which measurement tasks is this pin intended for? This test pin is intended primarily for end‑measurements, verification of mating features and inclusion in quality control processes where precise diameter verification is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.98mm Gauge Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the workshop-grade durability, sub‑micron tolerance (±0.001 mm) and exact 50 mm length to secure reliable end measurements and repeatable inspection results. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.598 — 5.98 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A gauge pin M323.598 designed for precise end‑measurement tasks in machine shops and toolrooms, with a nominal diameter of 5.98 mm, a tight tolerance of ±0.001 mm and a 50 mm overall length. Workshop version for rugged daily use Diameter 5.98 mm with ±0.001 mm tolerance Length 50 mm for precise end measurements Supplied in transport box for secure handling High precision that reduces inspection uncertainty The gauge pin is manufactured to a tolerance of ±0.001 mm, a specification that positions it in the sub‑micron class of inspection pins. Such narrow deviation is critical when verifying end measurements or matching nominal diameters in finishing operations; it reduces measurement scatter and helps avoid rework. In practice, this level of precision means the pin can be used as a reliable reference for go/no‑go checks, plug gauge comparisons and end‑of‑line validation procedures where dimensional certainty determines acceptance. Robust workshop design for everyday use Constructed from special steel and labelled as a workshop version, the pin balances toughness with dimensional stability. The compact 50 mm length and low mass (approximately 0.013 kg) make handling straightforward during repetitive inspection routines, while the small footprint simplifies storage in tool drawers or inspection kits. Delivery in a transport box ensures the pin arrives protected against knocks and contamination during logistics, preserving the calibrated geometry for immediate use on the shop floor. Fits into standard quality workflows and documentation Intended for end‑measurement tasks across machine shops, toolrooms and quality departments, the M323.598 integrates easily into existing inspection chains. Its clear specification—5.98 mm nominal diameter and ±0.001 mm accuracy—supports traceable records and routine checks. The compact form factor enables use with collets, fixtures and comparison benches, providing a straightforward reference for dimensional audits and batch acceptance tests. The product is identified as SKU M323.598 and GTIN 4061905058486 for inventory and procurement purposes. For a reliable workshop reference with sub‑micron accuracy, contact Metav Werkzeuge for tailored advice on the Metav IndustryLine gauge pin and its application in your inspection process Technical data Article number / SKU: M323.598 GTIN: 4061905058486 Label: Gauge pin, single, 5.98 mm, ±0.001 mm, length 50 mm Weight: 0.013 kg Facts Diameter: 5.98 mm Tolerance: ±0.001 mm Length: 50 mm Special features Material: Special steel Workshop version Supplied in transport box FAQ What tolerance does this gauge pin provide? The gauge pin M323.598 is specified to a tolerance of ±0.001 mm, suitable for high‑precision end measurements. Which nominal diameter is available for this item? This product is manufactured to a nominal diameter of 5.98 mm and is packaged as a single gauge pin. What material is the pin made from? The M323.598 is made from special steel, chosen for dimensional stability and workshop durability. Is the pin ready for immediate use upon delivery? Yes; the pin is supplied in a transport box to protect the measuring faces during transit so it arrives ready for inspection tasks. Which applications are typical for this gauge pin? Typical uses include end‑measurements, plug checks, and reference inspections in machine shops and toolrooms where precise diameter verification is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.99mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, a compact 5.99 mm diameter and a 50 mm length for reproducible end-measure checks; the workshop-grade construction ensures long service life. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application-specific advice. Gauge pin M323.599 — 5.99 mm diameter, ±0.001 mm accuracy (Workshop version) The gauge pin M323.599 is a single precision-ground measuring pin designed for fast end-measure verification and go/no-go checks in workshop environments. Diameter 5.99 mm with ±0.001 mm accuracy 50 mm special-steel length Workshop execution for daily use Supplied in a transport case Precision that shortens inspection cycles A compact measuring element with ±0.001 mm tolerance provides a clear, objective basis for pass/fail decisions during short-run inspections or incoming part checks. The tight diameter control reduces uncertainty when verifying bores and end dimensions, so fewer secondary measurements are required. This measurable accuracy supports traceable outcomes in production and reduces the time spent on rework or repeated checks. Robust design for routine workshop use Constructed from special steel, the pin is finished for resistance against wear in frequent handling. The 50 mm length combines handling comfort with stiffness to avoid deflection during insertion. At just 0.013 kg, the pin is easy to position in fixtures and jigs yet substantial enough to withstand everyday workshop conditions. The workshop specification ensures durability without the fragility of laboratory-only items. Simple integration into quality workflows The compact geometry and standard diameter make the pin suitable for use as a reference plug in inspection benches, handheld gauges or assembly fixtures. Using a defined pin like this one reduces subjective judgement in manual inspection and streamlines measurement routines. The clear, quantifiable specification allows planners to embed the pin directly into control plans and work instructions. Practical supply and traceability for production environments Supplied in a transport case for secure handling and storage, the pin is ready for immediate use at the workbench. The concise specification and article identifiers support inventory management and documentation. For operations that require defined end-measure tools for short-run or repetitive checks, this workshop-grade measuring pin provides a dependable, low-overhead solution. For workshop-grade end-measure verification, choose the Metav IndustryLine gauge pin M323.599 — order via Metav Werkzeuge or request tailored advice from our team at info@metav-werkzeuge.com or on +49 2822 7131930 Technical Data Article number: M323.599 GTIN: 4061905058493 Designation: Prüfstift, single, 5.99 mm, ±0.001 mm, length 50 mm Manufacturer: Metav IndustryLine Measurements Diameter: 5.99 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.013 kg Materials & Features Material: Special steel Version: Workshop execution Supplied in transport case FAQ What tolerance can be expected from this measuring pin? The measuring pin offers a tolerance of ±0.001 mm, making the M323.599 suitable for precise end-measure verification and go/no-go checks in production. Is the pin suitable for repeated use in a workshop environment? Yes. The workshop execution and special steel construction are intended for regular handling and the routine demands of a production floor. Can the pin be used as a reference in inspection fixtures? The compact 5.99 mm diameter and 50 mm length make the pin well suited as a reference plug in benches, jigs or handheld gauges for dimensional checks. How is the product supplied for transport and storage? The pin is supplied in a transport case to protect the measuring surface during handling and storage, ensuring consistent performance. Which article number should be used when ordering or documenting the tool? Please refer to article number M323.599 (Metav IndustryLine) for ordering and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.9mm Gauge Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of workshop-grade robustness combined with ±0.001 mm accuracy and a special steel construction for reliable end‑measurements; order directly via Metav Werkzeuge or consult our specialists for procurement and application advice. Gauge pin, single M323.590 — 5.90 mm, ±0.001 mm (Metav IndustryLine) A gauge pin, single 5.90 mm intended for precision end‑measurement tasks in workshop inspection and dimensional control. Workshop version, robust construction Diameter 5.90 mm with ±0.001 mm accuracy Length 50 mm for end‑measurements Delivered in protective transport case Precision for repeatable end‑measurements The gauge pin is engineered to provide ±0.001 mm tolerance at a diameter of 5.90 mm, ensuring high repeatability for critical inspection points. Classified in the micro segment for measuring tools, this size range supports fine mechanical checks where minimal deviation matters. The extremely tight tolerance reduces uncertainty in go/no‑go checks and gauging fixtures, which in turn helps to lower scrap rates and rework in production processes. Built for workshop handling and durability Produced in special steel and specified as a workshop version, the component balances wear resistance with dimensional stability under everyday use. With a length of 50 mm and a low mass of 0.013 kg, it is convenient to position in fixtures and jigs without undue handling fatigue. The supply in a protective transport case preserves the ground surfaces during storage and transit, helping to maintain measurement integrity across repeated use cycles. Practical application and integration benefits Ideal for end‑measurement, pin‑gauging and precision referencing, the single gauge pin is suited to assembly inspection, tool setting and component verification tasks. As a gage pin, it functions as a stable datum for setting up fixtures and verifying bore diameters where a single, precisely sized standard is required. The compact format supports rapid exchange in inspection routines, contributing to faster throughput without compromise on accuracy. For procurement and detailed advice on the Metav IndustryLine gauge pin (SKU M323.590), contact Metav Werkzeuge in Emmerich for tailored supply and specification support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.590 GTIN: 4061905061400 Brand: Metav IndustryLine Facts Diameter: 5.90 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.013 kg Measurement range (max): 5.9 mm Special features Material: Special steel Workshop version Supplied individually Delivered in a protective transport case FAQ Is this gauge pin supplied as a single item or in sets? The gauge pin is supplied as a single item; the product is listed as Gauge pin, single M323.590 from Metav IndustryLine. What tolerance and diameter does the Metav IndustryLine gauge pin offer? The Metav IndustryLine gauge pin M323.590 is specified at 5.90 mm diameter with a tolerance of ±0.001 mm. For which inspection tasks is this gage pin most suitable? This gage pin is designed for precise end‑measurements, pin‑gauging of bores and as a datum for fixture set‑up in workshop inspection workflows. What material is used and how does it affect wear? The pin is manufactured from special steel, chosen to provide a balance of hardness and resistance to wear for routine workshop use. Does the product include a transport case? The gauge pin is delivered in a protective transport case to preserve the measuring surfaces during storage and handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm 10.13 mm Test Pin Workshop Version, Special Steel, Packed in Case - Metav IndustryLine
Take advantage of the combination of high repeatability (±0.002 mm), a precise 10.13 mm diameter and a robust 50 mm length for reliable end‑measurement and gauge-setting tasks; the workshop version is supplied in a transport case for safe handling. Order directly via Metav Werkzeuge or consult our experts for specification checks. Gauge pin, single, 10.13 mm, 50 mm length — Metav IndustryLine A Gauge pin, single, 10.13 mm, 50 mm length designed for precise end‑measure checks, jig setup and quality control in workshop environments Workshop version for robust daily use Diameter 10.13 mm for precise fits 50 mm length in hardened special steel Delivered in a transport case Precision that reduces rework and speeds inspection The solid 10.13 mm gauge pin delivers a documented tolerance of ±0.002 mm, a level of exactness that supports repeatable fits and consistent gauge checks. This precision makes the pin particularly suitable for measuring bores, setting alignment and use as a reference mandrel in quality control. The tight tolerance reduces the need for rework by providing a reliable reference dimension during setup and inspection, translating directly into time saved on the shop floor and fewer rejected parts. Robust workshop design for daily use Manufactured from special steel, the component is finished for workshop duty and resists the wear typical in routine measurement tasks. The 50 mm length provides a stable engagement depth while the compact profile eases handling in confined setups. The workshop execution is intended to withstand repeated handling and insertion cycles, making the pin a durable option for production and maintenance teams who require both stability and ease of use. Practical delivery and traceable identification Supplied in a protective transport case, the pin arrives ready for safe storage and transport between inspection stations, reducing the risk of damage and contamination. The item is listed as M323.A13 and is categorised for bench and fixture measurement duties; traceable identification supports inventory management and process documentation. Reliable packaging and clear product labelling simplify logistics for purchasing and storekeeping operations. Contact Metav Werkzeuge for tailored supply of Metav IndustryLine gauge pins and ensure prompt delivery from Emmerich for immediate integration into inspection routines. Technical data SKU: M323.A13 GTIN: 4061905065132 Label: Gauge pin, single, 10.13 mm, 50 mm length Manufacturer: Metav IndustryLine Dimensions & accuracy Diameter: 10.13 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Features & delivery Material: Special steel Workshop version Delivered in transport case Category: Gauge pins FAQ Is this gauge pin suitable for setting plug gauges and mandrels? Yes. The Gauge pin, single, 10.13 mm, 50 mm length is designed for plug‑gauge and mandrel setup where a stable, repeatable reference diameter is required; the ±0.002 mm tolerance supports accurate seating and verification. What material is used and how durable is it? The pin is made of special steel in a workshop grade finish, which offers good resistance to wear for routine inspection and setting tasks. How is the product identified for stock and traceability? The item is listed as M323.A13 and carries GTIN 4061905065132, enabling straightforward inventory tracking and process documentation. Can this pin be carried between workstations without damage? Yes. The pin is supplied in a transport case to protect the component during storage and transfer between inspection benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm 10.22 mm Gauge Pin Single, Workshop Version, Special Steel, ±0.002 mm Accuracy - Metav IndustryLine
A compact solution for precise end‑measure checks: the combination of a Ø 10.22 mm nominal size, ±0.002 mm tolerance and a 50 mm length ensures repeatable dimensional control and stable handling in workshop inspection tasks. Order this gauge pin directly via Metav Werkzeuge for reliable supply and expert advice. Gauge pin M323.A22 — Ø 10.22 mm, 50 mm length (Metav IndustryLine) A Gauge pin M323.A22 designed for end‑measure verification and dimensional checking in inspection fixtures and workshop metrology Workshop version for robust use Nominal diameter Ø 10.22 mm 50 mm length for end measurements Tolerance ±0.002 mm high accuracy Precision that reduces rework and secures process quality The gauge pin offers a nominal diameter of 10.22 mm and a verified tolerance of ±0.002 mm, delivering measurable improvements in repeatability for routine inspection tasks. Such a tight tolerance is suited to fine adjustment and end‑of‑line checks where deviations translate directly into scrap or rework. Constructed from special steel, the pin combines wear resistance with dimensional stability, which means fewer replacements and more consistent batch acceptance rates. Built for workshop conditions and practical handling Supplied in a workshop specification, the inspection pin is machined to withstand everyday use on the shop floor. The 50 mm length provides secure seating in gauges and fixtures while remaining easy to handle during rapid inspection cycles. Delivery includes a protective transport case, which reduces the risk of damage in transit and helps maintain the calibrated state of the component between uses. The robust design supports efficient inspection workflows and reduces downtime associated with fragile measuring aids. Traceability, integration and supply assurance Integration into existing inspection rigs is straightforward thanks to the clear nominal dimensioning and consistent manufacturing quality. The component is traceable by its GTIN and internal article number, aiding stock control and quality documentation. Metav IndustryLine’s position as a precision partner ensures dependable availability from Emmerich and straightforward replenishment for production lines that cannot afford interruptions. The combination of industrial supply reliability and precise manufacturing makes this inspection pin a pragmatic choice for quality‑focused operations. Secure Metav IndustryLine precision through Metav Werkzeuge for assured stock, fast dispatch and specialist guidance — contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.A22 GTIN: 4061905063398 Category: Messstifte Manufacturer: Metav IndustryLine Facts Diameter: 10.22 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: special steel Supplied in transport case Single gauge pin for end measurements FAQ What is the intended application for this gauge pin? The gauge pin M323.A22 is intended for end‑measure verification and dimensional checks in fixtures and inspection routines where a nominal Ø 10.22 mm reference is required. How precise is the inspection pin and what does the tolerance mean? The inspection pin is manufactured to ±0.002 mm; this tolerance indicates the maximum allowable deviation from the nominal diameter during production, ensuring tight repeatability for pass/fail checks. Is the gauge pin suitable for frequent shop‑floor use? Yes — the workshop execution and special steel construction provide durability for regular handling and inspection cycles while maintaining dimensional stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm 10.23 mm Gauge Pin Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of high repeatability, compact dimensions and workshop-grade robustness for dependable end measurements; order the test pin through Metav Werkzeuge or consult our technical advisers for application advice. Test pin (single) 10.23 mm, 50 mm length — Metav IndustryLine The Test pin (single) 10.23 mm, 50 mm length is a compact measuring probe intended for precise end measurements in workshop and inspection settings, offering a balance of rigidity and usability for daily gauging tasks. Workshop version for robust daily use Diameter 10.23 mm, length 50 mm Accuracy ±0.002 mm for fine control Made from special steel for durability Precision where small differences matter The single test pin delivers a highly reproducible reference for end measurements and fits into go/no‑go assemblies or manual gauging fixtures with minimal setup. With a nominal diameter of 10.23 mm and a stated tolerance of ±0.002 mm, the pin is designed to reduce measurement scatter in repeat checks and setup procedures. Its compact 50 mm length ensures minimal deflection under manual handling, so the user benefits from consistent contact points and reliable results when assessing bore limits, jig interfaces or mating parts during production runs. Built for the workshop: durability and handling Manufactured in special steel, the probe is optimised for frequent use in demanding environments; surface finish and material selection aim to resist wear while maintaining dimensional stability. The workshop version construction provides a robust shank and head geometry that resists deformation during insertion and removal, prolonging service life and lowering replacement frequency. Its modest weight and compact form factor make the component easy to seat in fixtures or to use as a reference element in manual quality control processes, improving throughput without compromising repeatability. Practical integration and measurement benefits As a single, purpose‑built gauge pin, this item is particularly useful for end‑of‑line checks, fixture alignment and validation of small bore diameters. The compact design offers quick interchangeability in modular gauges and nest fixtures, helping to streamline setup times and reduce machine downtime. The probe’s specification supports traceable measurements within close tolerances, making it suitable as a workshop standard for routine verification tasks where a clear pass/fail assessment is required rather than extensive metrological analysis. For workshop-ready precision, request the Metav IndustryLine test pin M323.A23 from Metav Werkzeuge and let our team advise on fitment and delivery from Emmerich. Technical data Article number: M323.A23 GTIN: 4061905063404 Manufacturer: Metav IndustryLine Facts Diameter: 10.23 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Intended use: end measurements Version: workshop execution Packaging: single item FAQ What is the nominal diameter and tolerance of this test pin? The test pin has a nominal diameter of 10.23 mm with a tolerance of ±0.002 mm, specified for the Metav IndustryLine single test pin M323.A23. Which materials is the probe suitable for measuring against? The probe is made from special steel and is designed as a contact element for metal components and fixture interfaces in workshop measurement tasks. Can the test pin be used in modular gauge fixtures? Yes, the single pin format and its 50 mm length make the item suitable for insertion into modular gauge plates and nests for quick pass/fail checks. Is this item part of a set or supplied individually? This entry describes a single test pin; the Metav IndustryLine M323.A23 is supplied as an individual probe for flexible use in fixtures. How does the workshop version differ from laboratory gauges? The workshop execution focuses on robustness and everyday usability under production conditions, offering a balance between durability and dimensional consistency for routine checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm 10.7 mm Test Pin Single, Workshop Version, Special Steel - Metav IndustryLine
The compact combination of ±0.002 mm tolerance and special‑steel construction delivers reliable, repeatable inspection results; the workshop‑grade finish and included transport case keep the pin serviceable in daily use. Order the item directly via Metav Werkzeuge or consult our specialists for compatibility and supply. Gauge pin, single — 10.7 mm diameter × 50 mm length (Metav IndustryLine) The gauge pin, single, 10.7 mm × 50 mm is a workshop‑grade check pin for precise hole and end‑measure verification in small‑component inspection. Workshop‑grade finish for daily use Diameter 10.7 mm with ±0.002 mm tolerance Length 50 mm for end‑measure checks Special steel construction with protective case Accuracy that reduces rework and inspection time This inspection pin is specified with a tight tolerance of ±0.002 mm, which translates into dependable pass/fail decisions during routine checks and first‑article inspections. The narrow tolerance reduces ambiguous fits and helps avoid costly rework by making dimensional assessments reproducible. Where visual gauging or manual feel can vary, a measured reference pin gives a quantifiable outcome; the ±0.002 mm figure represents the manufacturing deviation and should be read as the maximum permitted variation from nominal diameter, supporting traceable comparison against drawing limits. Built for the workshop — durable, compact and easy to store Designed as a workshop‑grade tool, the pin uses special steel to withstand repeated insertion into bores and gauges while retaining its dimensional stability. Its 50 mm length is optimised for end‑measure and through‑bore verification on small parts without excess overhang, and the compact format is categorised in the micro range (10–100 mm), which is ideal for fine mechanical work and small assemblies. The supplied transport case protects the pin during storage and transit, helping to preserve calibration and surface quality between uses. Practical handling and fit into inspection routines The plain cylindrical geometry makes the pin straightforward to use with callipers, micrometres and comparing devices, as well as within gauge blocks or fixtures. The item’s modest mass and balanced form factor reduce the chance of unintentional tilt during insertion, improving the repeatability of manual checks. For shops aiming to streamline inspection workflows, the pin serves as a fixed‑diameter reference that complements adjustable measuring tools and supports quick go/no‑go assessments when time or throughput is critical. Traceability and workshop integration Although not supplied as an ISO 17025 calibrated artefact by default, the manufacturing tolerance and material specification provide a clear basis for documenting measurement routines and quality records. The gauge pin integrates well into existing tool sets and can be held as a master reference in inspection benches or portable kits. Its robustness and transport protection minimise performance drift from handling, which supports consistent measurement outcomes over time. For reliable workshop inspection with tight tolerances choose the Metav IndustryLine gauge pin — contact Metav Werkzeuge for procurement and technical clarification at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M323.A70 GTIN: 4061905065507 Brand: Metav IndustryLine Numbers / Core technical data Diameter: 10.7 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features / Versions Material: special steel Workshop execution Supplied in transport case Category: gauge pins (Messstifte) FAQ What is the intended use of this gauge pin? The gauge pin is intended for precise hole and end‑measure verification in workshop and production inspection; the M323.A70 serves as a fixed‑diameter reference for go/no‑go and comparative checks. How precise is the diameter of the pin? The diameter is manufactured to a tolerance of ±0.002 mm, providing a stable reference for reproducible pass/fail decisions during dimensional control. Does the pin come with a protective case? Yes, the pin is supplied in a transport case to protect the surface and dimensions during storage and handling. Which material is used for the pin? The pin is made of special steel, chosen for wear resistance and dimensional stability in routine inspection tasks. Is the pin suitable for fine mechanical assemblies? Yes, classified in the micro range (10–100 mm), the pin is well suited to fine mechanical work and small component inspection. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm 13.02 mm Gauge Pin Workshop Version, Special Steel, ±0.002 mm - Metav IndustryLine
Combine workshop-grade construction, a compact 50 mm length and a tight ±0.002 mm tolerance to ensure repeatable end‑dimension checks on the shop floor; order the gauge pin directly via Metav Werkzeuge or consult our technical advisors if clarification is required. Gauge pin, single — 13.02 mm diameter, 50 mm length (Metav IndustryLine) A single gauge pin for precise end‑dimension verification and routine inspection in workshop environments. Workshop version for daily use Diameter 13.02 mm with tight tolerance Accuracy ±0.002 mm Supplied in transport case Consistent measurement accuracy that reduces rework The Prüfstift, einzeln, 13,02 mm Länge 50 mm is manufactured for reliable, repeatable checks where small deviations matter. The ±0.002 mm tolerance translates into measurable process confidence: fewer false rejects, clearer acceptance limits and reduced rework rates. For quality control tasks that demand traceable single‑point verification, the narrow tolerance and stable geometry provide a deterministic check that complements calipers and micrometres, speeding decision making on incoming parts and finished assemblies. Robust workshop construction and protected transport Constructed from special steel, this single pin combines wear resistance with a compact 50 mm shaft that remains easy to handle during routine inspections. The 13.02 mm diameter is machined to a tight nominal, which helps maintain concentricity when used with locating fixtures or pin blocks. Delivery in a transport case protects the datum surface during transit and storage, keeping the measuring face free from nicks so that the pin retains its specification between uses. The workshop variant is optimised for frequent handling and straightforward integration into inspection routines. Practical use in production workflows As a dedicated gauge pin for end‑dimension checks, the component integrates simply into go/no‑go fixtures, setting masters and contact probes. Its compact form factor allows rapid insertion and extraction, while the documented accuracy supports statistical process control and inline spot checks. Identification via SKU and GTIN facilitates inventory management and ensures correct replacement ordering; the pin therefore serves as a low‑complexity element that raises measurement reliability across assembly, machining and inspection stations. For specification advice or to secure matching gauges and accessories from Metav IndustryLine, contact Metav Werkzeuge directly—our team in Emmerich will advise on fitment and supply options. Technical data Article number: M323.D02 GTIN: 4061905067167 Brand: Metav IndustryLine Material: Special steel Weight: 0.1 kg Facts Diameter: 13.02 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop version (robust handling) Supplied in transport case for protection Single gauge pin for end‑dimension checks Category: Gauge pins (Messstifte) FAQ What materials is this gauge pin made from? The gauge pin is made from special steel, chosen for wear resistance and dimensional stability in workshop conditions; the Metav IndustryLine pin M323.D02 maintains its surface quality during routine use. Is the accuracy of ±0.002 mm suitable for shop‑floor inspection? Yes, the ±0.002 mm tolerance offers high repeatability for routine end‑dimension verification and is appropriate for many mechanical inspection tasks where sub‑0.01 mm control is required. Can the pin be used with locating fixtures and pin blocks? The 13.02 mm diameter and precise machining make the pin compatible with standard locating fixtures and pin blocks; Metav Werkzeuge can advise on matched holders and sets. How is the gauge pin delivered and protected during transport? The pin is supplied in a transport case to protect the measuring faces and ensure correct condition on arrival. How does this pin support inventory and traceability? Identification via SKU M323.D02 and GTIN 4061905067167 simplifies stock control and replacement ordering for maintenance and calibration planning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm 16.46 mm Test Pin Workshop Version, Special Steel - Metav IndustryLine
Combining workshop‑grade durability, a tight ±0.002 mm tolerance and a compact 50 mm length, this gauge pin delivers reliable reference measurements for end‑measure checks and plug inspections; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.G46 – 16.46 mm diameter, 50 mm length (Metav IndustryLine) A Gauge pin M323.G46 created for precise end‑measure and plug checks in workshop and production inspection routines. Workshop‑grade design for robust use Diameter 16.46 mm precision ground Tolerance ±0.002 mm for tight checks 50 mm overall length for standard fixtures Supplied in protective case for transport Reliable reference measurements for end‑measure checks The plug‑style measuring pin is intended as a reference for dimensional checks where reproducibility matters. Machined from special steel and ground to a precise diameter of 16.46 mm, the component offers a verified runout and a repeatable contact surface suited to routine inspection and go/no‑go verification. With an indicated concentricity tolerance of ±0.002 mm, this tool supports quality control tasks that demand narrow acceptance bands without requiring complex fixtures. The compact design keeps thermal mass low, reducing dimensional drift during short inspection cycles. Built for durability and straightforward handling Designed as a workshop‑grade instrument, the pin balances robustness with ergonomic handling. At roughly 0.15 kg, the item is easy to position in fixtures or bores, while the 50 mm overall length provides sufficient engagement for common end‑measure scenarios without excessive overhang. Surface treatment and the selected special steel composition improve wear resistance and ensure a stable contact geometry over many inspection cycles. Delivery includes a protective case, intended for safe transport between workstations and for basic protection against knocks and contamination during storage. Fits into inspection workflows and reduces uncertainty Integration into existing measuring routines is straightforward: the pin functions as a reference gauge for plug checks, end‑dimension verification and comparative inspections alongside dial indicators, calipers or bespoke fixtures. The compact footprint supports handheld use as well as fixture mounting; its precision makes it suitable for serial spot checks in production and for acceptance procedures in workshop maintenance. Identification data such as SKU and GTIN facilitate inventory tracking and procurement, helping to sustain traceability across quality documentation and process records. For specification support or to order the Metav IndustryLine gauge pin M323.G46, contact Metav Werkzeuge for tailored advice and supply arrangements. Technical data Article number: M323.G46 GTIN: 4061905068508 Label: Prüfstift, einzeln, 16,46 mm Länge 50 mm Numbers / Core technical data Diameter: 16.46 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Designs / Special features Material: Special steel Workshop execution Supplied in protective case Category: Gauge pins FAQ What is the dimensional tolerance of the gauge pin? The gauge pin is specified with a tolerance of ±0.002 mm, making it suitable for tight go/no‑go checks and reference measurements. Is the pin suitable for heavy workshop use? Yes, the workshop‑grade finish and special steel construction mean the pin is intended for routine inspection tasks and robust handling. How is the product delivered for transport and storage? The item is supplied in a protective case to safeguard the measuring surface during transport between workstations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm 18.29 mm Gauge Pin Single, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precise dimensional control and robust workshop design to speed up routine inspection and reduce rework. The combination of a tight radial tolerance and durable special steel ensures reliable fit checks and long service life. Order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. Gauge pin, single, Ø 18.29 mm — 50 mm length (Metav IndustryLine) The Gauge pin Ø 18.29 mm, length 50 mm is a workshop-grade precision pin for end‑size checks and fit verification in quality control and inspection workflows. Workshop-grade design for routine inspection Diameter Ø 18.29 mm, length 50 mm Special steel construction for durability Radial tolerance ±0.002 mm for tight fits Consistent accuracy for repeatable inspection results Manufactured for routine dimensional checks, this pin delivers high repeatability thanks to a radial tolerance of ±0.002 mm. Such a specification reduces ambiguity in pass/fail decisions during incoming inspection or in-process spot checks, thereby cutting down on rework and inspection time. The compact geometry supports quick seating in holders or jigs, enabling faster batch sampling without compromising measurement integrity. Built to withstand workshop use The item is produced from special steel in a workshop‑grade design that balances hardness with resilience. A nominal length of 50 mm and a weight of 0.15 kg create a stable feel in handling and positioning. This robustness translates into fewer tool changes and longer intervals between replacements, which supports uninterrupted production cycles and lowers lifetime handling costs for the inspection bench. Easy integration into existing inspection procedures As a single gauge pin it is suited for end‑size verification, plug and clearance checks, and fit confirmation within assemblies. The geometry is compatible with standard pin holders and test fixtures, so it can be introduced into established workflows without major fixture redesign. By streamlining the verification step, the part helps maintain throughput while preserving dimensional control across batches. Contact Metav Werkzeuge today to specify Metav IndustryLine workshop-grade gauge pins and ensure fast delivery from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.I29 GTIN: 4061905070891 SKU: M323.I29 Core data Diameter: 18.29 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Features / Application Workshop version Special steel Single gauge pin for end‑size checks Category: gauge pins (messstifte) Intended use: fit verification, plug checks FAQ What tolerance does the gauge pin offer? The gauge pin (gauge pin, single, Ø 18.29 mm, length 50 mm) is specified with a radial tolerance of ±0.002 mm, allowing tight fit and clearance verification. Can this pin be used in standard pin holders and fixtures? Yes, the single gauge pin from Metav IndustryLine is designed for compatibility with common pin holders and test fixtures used in routine quality control. Is the material suitable for workshop environments? The plug is made from special steel and supplied as a workshop‑grade item, which provides durability appropriate for frequent handling and inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com