Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
48 Sizes Thread Go/No-Go Plug Gauge Set 0.5–6 mm Pitch Metric & 3–48 TPI, 60° Profile, 3pcs/Size, Plastic Case
Take advantage of precise thread verification, a comprehensive 48-piece range with three pins per size, and a compact transport case for organised inspection routines — order the Thread Gauge Pin Set directly via Metav Werkzeuge or consult our advisors for specification support. Thread Gauge Pin Set M318.510 — 48-piece set for metric and inch thread pitch verification The Thread Gauge Pin Set M318.510 is designed for efficient workshop and inspection use, enabling rapid verification of metric and U.S. inch thread pitches in production and quality‑control environments. 48-piece set across 16 sizes Metric and imperial thread pitch coverage Accuracy ±0.004 mm Supplied in transport case Faster, traceable checks for mixed-thread production The set delivers repeatable, measurable results for both metric and imperial threads, covering thread pitches from 0.5–6 mm (metric, 60°) and 3–48 TPI (U.S., 60°). With a stated accuracy of ±0.004 mm, the pins allow clear go/no‑go decisions during incoming inspection and process control, reducing rework and assembly faults. Using dedicated gauge pins instead of improvised probes simplifies documentation and makes visual and tactile checks faster without sacrificing reliability. Organised, workshop-ready kit that reduces downtime Packed as a complete 48-piece set with three pins per size, the collection is arranged for quick selection and replacement during routine checks. Each pin is approximately 70 mm long and the full set weighs 0.4 kg, making it highly portable for shop‑floor use or inspection benches. Delivery in a transport case protects the gauges during handling and keeps sizes organised, which shortens search times and supports consistent measurement practice across shifts. Built to industrial expectations and simple to integrate Manufactured to factory standard (Werksnorm), the set is suitable for use alongside precision calipers and other inspection tools when verifying thread form and pitch. The range of diameters supplied accommodates both fine and coarse threads commonly found in mechanical assemblies, fittings and maintenance tasks. As a ready‑to‑use set, it supports standardised inspection procedures and contributes to traceability in quality records, helping to demonstrate compliance during audits. For reliable, workshop-friendly thread inspection choose the Metav IndustryLine Thread Gauge Pin Set M318.510 — contact Metav Werkzeuge in Emmerich for procurement and technical advice. Technical Data Article number: M318.510 GTIN: 4054469129112 Set contents: 48 pieces (16 sizes) Pieces per size: 3 Total weight: 0.4 kg Core measurements Length: 70 mm Accuracy: ±0.004 mm Thread pitch range: 0.5–6 mm (metric, 60°) Thread pitch range: 3–48 TPI (U.S., 60°) Diameters (mm / inch): 0.4572/0.018”, 0.6096/0.024”, 0.7366/0.029”, 0.8128/0.032”, 1.0160/0.040”, 1.1430/0.045”, 1.3970/0.055”, 1.6002/0.063”, 1.8288/0.072”, 2.0574/0.081”, 2.3368/0.092”, 2.7432/0.108”, 3.0480/0.120”, 3.2258/0.127”, 3.6322/0.143”, 4.6990/0.185” Special features Delivery in transport case for secure handling Standard: Werksnorm Category: Gauge pins / Thread gauges Application: Thread pitch verification FAQ What sizes and quantities are included in the set? The Thread Gauge Pin Set M318.510 contains 48 pieces in 16 sizes, with three pins supplied per size for repeat checks and redundancy. Which thread pitches can be verified with these pins? The gauges in this set cover metric pitches from 0.5–6 mm (60°) and U.S. inch threads from 3–48 TPI (60°), suitable for both fine and coarse applications. What accuracy can be expected during inspection? The Thread Gauge Pin Set M318.510 is specified with an accuracy of ±0.004 mm, providing reliable decisions for workshop and inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Taking advantage of Ø 4.00 mm sizing with a tight ±0.001 mm tolerance and a compact 50 mm length delivers repeatable end‑measure checks with workshop robustness; order the gauge pin directly via Metav Werkzeuge or contact our specialists for application advice. Gauge pin M323.400 — single precision gauge pin, Ø 4.00 mm ±0.001 mm, 50 mm (Metav IndustryLine) The Gauge pin M323.400 is a single precision reference pin designed for end‑measure verification and fit testing in workshop metrology. Single precision gauge pin Ø 4.00 mm ±0.001 Length 50 mm for reliable end‑measure checks Made from special steel, workshop version Supplied in a protective transport box Consistent tolerances for dependable inspection results The core advantage of this gauge pin lies in its ±0.001 mm tolerance, which supports highly reproducible limit measurements and tight fit checks in small‑component production. Where control of final diameters and end‑faces matters, the fine tolerance reduces uncertainty in pass/fail decisions and shortens inspection cycles. The compact diameter supports micro‑scale verification tasks while maintaining high precision and repeatability. Robust workshop design that endures daily use Built as a workshop version from special steel, the pin combines a compact form with durable construction suited to routine handling and fixture use. The balanced mass and short length reduce the influence of wobble or deformation during insertion, so measurements remain stable over multiple cycles. This robustness means the pin is practical for bench inspection, small jig checks, and quick comparative tests in production areas. Compact dimensions and practical storage for busy shops With a 50 mm overall length and Ø 4.00 mm diameter, the gauge pin is easy to position in confined fixtures and to pack with other metrology tools. Supplied in a protective transport box, the item is protected against transit damage and contamination until use, streamlining storage and transport. Its small weight also simplifies handling when several reference pins are needed for a set of go/no‑go checks. Typical applications and compatibility in inspection workflows The pin is intended as a reference for end‑measure checks, plug‑fit verification and assembly trials where precise small diameters are critical. In fixture construction and quality control stations it functions as a dimensional standard for matching holes, seats and mating parts. Identification details (SKU M323.400) allow simple integration into inventory and traceability systems for consistent process documentation. For secure supply from our European quality hub and tailored advice on the Metav IndustryLine gauge pin, contact Metav Werkzeuge—direct assistance is available via Emmerich for prompt delivery and technical consultation. Technical data Article number: M323.400 GTIN: 4061905057137 SKU: M323.400 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 4,00mm, +/- 0.001 mm Länge 50 mm Key measurements Diameter: 4.00 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.007 kg Measurement range min/max: 4 mm / 4 mm Special features Workshop version Material: special steel Supplied in transport box Story trigger: end‑measure reference FAQ What tolerance can be expected from this gauge pin? The gauge pin offers a tolerance of ±0.001 mm, giving highly repeatable results for end‑measure and fit checks with the Metav IndustryLine gauge pin M323.400. Is the pin supplied with calibration documentation? The delivery does not state ISO 17025 calibration; the gauge pin is supplied in a protective transport box but does not include an ISO 17025 certificate by default. Which material is used for the gauge pin? The gauge pin is manufactured from special steel, specified for the Metav IndustryLine single precision gauge pin to provide workshop‑grade durability. Can this pin be used for plug and seat verification in fixtures? Yes, the 4.00 mm diameter and precise tolerance make the pin suitable as a reference for plug‑fit and seat verification in fixture and assembly checks. How does the compact length affect measurements? The 50 mm length keeps the pin rigid and easy to handle, reducing measurement variability in short‑reach inspection tasks and making it suitable for confined fixture applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4–5 mm Test Pin Set 101 Pc, 0.01 mm Graduation, With Pin Holder, Special Steel, Supplied In Case - Metav IndustryLine
Take advantage of a compact, workshop-ready 101-piece gauge pin set that combines fine 0.01 mm graduations with a measured accuracy of ±0.004 mm, ensuring consistent bore checks and reduced rework. Order the gauge pin set directly via Metav Werkzeuge or contact our consultants for technical advice. Gauge pin set – 4.01–5.00 mm range, 0.01 mm graduation (Metav IndustryLine) The Gauge pin set is a precision inspection kit designed for small-bore verification and plug-gauge tasks in machine shops and precision assembly environments. 101-piece gauge pin set Range 4.01–5.00 mm in 0.01 mm steps Hardened special steel pins Supplied with pin holder and protective case Reliable small-bore inspection for repeatable results This compact inspection kit delivers reliable repeatability for small-diameter bores by combining tight 0.01 mm increments with an instrument accuracy of ±0.004 mm. The fine stepping allows methodical narrowing-in during tolerance checks, which reduces the need for rework and streamlines quality control routines. The set is optimised for tasks where consistent results matter, such as pin fits, bushings and small hydraulic components, providing measurable time savings on batch inspections. Precision engineering and material benefits explained Pins are manufactured from special steel and heat-treated for wear resistance, offering a durable contact surface that maintains dimensional integrity under frequent use. The hardened finish reduces surface damage to mating parts and the holder's support minimises lateral play during measurement. For users less familiar with gauge terminology: the graduation indicates the step between adjacent pins, so a 0.01 mm increment means controlled, predictable adjustments when selecting the correct gauge for a tight tolerance. Practical workshop kit and handling advantages The kit includes a secure pin holder and is supplied in a protective case for safe transport and organised storage, keeping individual pins accessible and minimising handling errors. The compact format suits bench-top workflows and portable inspection routines, allowing fast selection and clear identification of pins. Designed for everyday use, the set supports a structured inspection process that increases throughput without compromising measurement quality. Applications and operational value Ideal for precision workshops, toolrooms and small-bore production lines, this set supports a wide range of verification tasks where micro-scale accuracy is required. Typical uses include gauging of bores in components, verification of dowel fits and measurement checks during assembly. The combination of close graduations and robust materials assures dependable performance in routine quality checks and small-series production. For specification confirmation or to arrange supply, contact Metav Werkzeuge for tailored ordering and advice on integrating this gauge pin solution into existing inspection workflows Technical data Article number: M318.574 GTIN: 4054469168289 Material: Special steel Accuracy: ±0.004 mm Graduation: 0.01 mm Core dimensions Measuring range: 4.01–5.00 mm Length: 50 mm Weight: 1.9 kg Tariff number: 90173000 Special features Supplied with pin holder Protective case for transport 101-piece set (labelled configuration) Hardened, wear-resistant finish FAQ What size range do the pins cover? The pins in this gauge pin set cover a range from 4.01 mm to 5.00 mm in 0.01 mm increments, suitable for small-bore inspection tasks. Is the set suitable for daily workshop use? Yes, the hardened special steel pins and the supplied pin holder make the set robust enough for daily verification and bench-top inspection routines. How precise are the measurements with this kit? Measurements can be made with an accuracy of approximately ±0.004 mm, allowing confident checks for fine tolerances. Does the set include storage for the pins? The kit is supplied in a protective case for safe transport and organised storage; a dedicated pin holder is also included for handling and measurement support. Can the set be used for hydraulic or pneumatic component inspection? Yes, the fine graduations and stable pin geometry are well suited to verifying bores and fits in small hydraulic and pneumatic components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4–5mm Gauge Pin Holder Red Single‑Sided Anodised Aluminium - Metav IndustryLine
Take advantage of the anodised aluminium construction and precise compatibility with 4–5 mm measuring pins to secure repeatable seating in inspection gauges; order directly via Metav Werkzeuge or consult our specialists for fixture integration. Measuring Pin Holder NOGO, 4–5 mm — anodised aluminium, red one-sided mount (Metav IndustryLine) A Measuring Pin Holder NOGO, 4–5 mm designed to hold 4–5 mm measuring pins securely for gauge and fixture applications in quality control and workshop inspection tasks. Anodised aluminium body for wear resistance Fits measuring pins Ø 4–5 mm Red one-sided mount for clear identification Consistent positioning for reliable measurement results The holder is engineered to provide repeatable positioning, making it suitable for go/no-go and comparative inspection setups where reproducibility matters. Its compatibility with 4–5 mm diameter measuring pins ensures straightforward component selection and reduces set-up time in the metrology workflow. The anodised finish contributes to a stable seating surface that resists light abrasion, so measurements stay consistent across repeated cycles and routine inspections. Reduced downtime through durable, easy-to-handle design A lightweight anodised aluminium body delivers an appealing balance of rigidity and low mass, so the holder integrates without adding unnecessary load to fixtures. The red one-sided mount gives immediate visual identification on a busy inspection bench, aiding organisation and avoiding mistaken placements. The simple geometry minimises the need for maintenance and supports rapid replacement when recalibration or fixture reconfiguration is required. Straightforward integration and traceable sourcing Designed for quick installation in bespoke gauges and inspection fixtures, this variant from Metav IndustryLine accepts standard measuring pins and adapts to common mounting procedures used in small-batch and series production. The clear specification and material choice make procurement and inventory management easier, while Metav’s distribution from Emmerich provides an additional quality filter for European customers who value consistent supply and documented origins. For compatibility checks or procurement advice, contact Metav Werkzeuge in Emmerich to confirm fixture fitment and request technical guidance or a quotation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M318.567.5 SKU: M318.567.5 Manufacturer: Metav IndustryLine Dimensions & measurable data Width: 12 mm Length: 55 mm Compatible pin diameter: 4–5 mm Colour: red Materials & features Material: aluminium, anodised Application: for mounting measuring pins in gauges and fixtures Variant: NOGO, one-sided red mounting Intended use: inspection and go/no-go checking FAQ What pin diameters does the holder accept? The holder accepts measuring pins with a diameter of 4–5 mm, ensuring compatibility with common inspection pins. Is the body corrosion-resistant? Yes, the anodised aluminium construction provides a wear- and corrosion-resistant surface suitable for workshop environments. Can this holder be used in go/no-go gauges? The NOGO variant is designed for go/no-go style fixtures and supports reliable seating for comparative checks. Does the product include the measuring pins? No, the holder is supplied for the reception of measuring pins; measuring pins are ordered separately. Which brand supplies this holder and what is the SKU? This holder is from Metav IndustryLine, identified by SKU M318.567.5 and intended for integration into standard inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4–5mm Gauge Pin Set, 21 Pieces, 70mm Length, 0.05mm Steps, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of a 0.05 mm graduation, a 4.00–5.00 mm diameter range and robust special-steel construction to standardise bore and fit checks with dependable repeatability; order or request application advice via Metav Werkzeuge for straightforward procurement and technical guidance. Metav IndustryLine Gauge pin set M318.824 — 4.00–5.00 mm, 0.05 mm graduation Gauge pin set by Metav IndustryLine for accurate fit, bore and plug measurements in inspection and production environments *0.05 mm graduation for fine tolerance checks *Diameter range 4.00–5.00 mm *70 mm pin length for deep bore access *Special-steel construction for durability Consistent measurement performance for routine inspection A compact set designed for precise incremental checks, the gauge pins provide a 0.05 mm step increment across the 4.00–5.00 mm range, permitting systematic narrowing of tolerances during setup and inspection. This fine gradation reduces trial‑and‑error, shortens cycle times and helps avoid costly rework by making deviation identification straightforward. The set is ideal where repeatable, small-step adjustments are required for gauging and standardisation tasks. Accessibility and durability where it matters With a 70 mm pin length, the pins reach into deeper bores and recesses with stability, enabling checks that shorter pins cannot accomplish. Constructed from special steel, the pins offer improved wear resistance for frequent use on production floors; this material choice balances surface hardness and resilience so that dimensional integrity remains stable through repeated measurements. The result is a toolset that supports a dependable inspection routine with minimal maintenance. Organised measurement for efficient workflows Supplied as a coherent set with clearly graded increments and compact handling characteristics, the collection of pins simplifies selection and comparison during quality checks. The 21 pins cover the stated diameter span in uniform steps, allowing technicians to work through fits and clearances without interrupting the process for additional tooling. Lightweight and straightforward to stow, the set promotes faster decision-making at the inspection bench while maintaining the precision expected in metalworking and assembly applications. For a reliable, production-ready gauge pin solution choose the Metav IndustryLine set — contact Metav Werkzeuge for tailored advice, availability details or a specification sheet at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M318.824 GTIN: 4054469181967 Manufacturer: Metav IndustryLine Facts Pin length: 70 mm Diameter range: 4.00–5.00 mm Graduation: 0.05 mm Pieces per set: 21 Weight: 0.85 kg Special features Material: Special steel Delivery form: Set Application: Bore, fit and plug measurement FAQ What tolerance increments are available in this set? The Metav IndustryLine gauge pin set is supplied in 0.05 mm increments across the 4.00–5.00 mm span, enabling fine adjustment and comparison during inspection. Can these pins be used for deep bore measurements? Yes. Each pin has a length of 70 mm, which facilitates checks inside deeper bores and recesses that shorter pins cannot reach. What material are the pins made from? The pins are manufactured from special steel, chosen to provide a balance of hardness and wear resistance suitable for frequent use in production environments. How is the set arranged for practical use? The pins are supplied as a coherent set covering the diameter range in uniform steps, which streamlines selection and sequential checking when verifying fits and clearances. What is the article number for reordering or reference? The set is listed under article number M318.824 and GTIN 4054469181967 for simple identification and reorder processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4–5mm Go/No‑Go Test Pin Holder Double‑Sided Green/Red - Metav IndustryLine
Take advantage of a compact, colour‑coded inspection aid that accepts 4–5 mm probe pins and is machined from anodised aluminium for durable workshop use. The double‑sided Go/No‑Go marking speeds visual checks and reduces handling time; order directly via Metav Werkzeuge or consult the team for integration advice. Probe Pin Holder Go/No‑Go — double‑sided anodised aluminium (4–5 mm) The Probe Pin Holder Go/No‑Go is a compact, double‑sided fixture accessory for 4–5 mm probe pins, designed for rapid visual pass/fail checks in inspection jigs and gauge assemblies. Anodised aluminium construction For 4–5 mm probe pins Double‑sided Go/No‑Go colour coding Compact 80 mm length, 12 mm width Faster visual inspection, fewer handling steps The holder is made from anodised aluminium, which combines low weight with corrosion resistance and a consistently finished surface that resists workshop wear. Its Go/No‑Go colour scheme (green/red) is applied to opposite faces so that a single turn or flip delivers an immediate visual verdict during serial inspection. Because the component accepts standard 4–5 mm probe pins, insertion and replacement are straightforward, reducing downtime in measurement routines. The result is a measurable improvement in throughput during repetitive checks and a lower risk of misinterpretation that can occur with ambiguous markers. Fits into gauges and small fixtures with predictable geometry With an overall length of 80 mm and a width of 12 mm, the accessory is intentionally compact to suit confined gauge layouts while providing sufficient form to be handled easily in an assembly. The design purpose is to hold probe pins securely while keeping the alignment consistent between checks; this stability supports reproducible outcomes in shop‑floor control plans. The Go/No‑Go concept is a simple tolerance visualiser: one face confirms conformity, the other indicates deviation, enabling operators and inspectors to make rapid decisions without additional measuring steps. Robust workshop performance and supply reliability Machined from anodised aluminium, the holder resists surface abrasion and provides a low‑maintenance option for fixtures that see frequent use. Its straightforward construction means long service life even under repetitive handling; replacement probe pins remain the only service items. Sourcing through an established partner ensures availability for both one‑off retrofits and larger toolroom deployments, supporting continuous operation and predictable stock replenishment. For fast availability from Metav Werkzeuge in Emmerich and practical advice on mounting or integrating the Metav IndustryLine probe pin holder into inspection setups, contact Metav Werkzeuge to arrange supply and technical guidance. Technical data Article number: M318.568.5 Name: Messstift‑Halter, GO‑NOGO, 4 - 5 mm doppelseitig, grün + rot Brand: Metav IndustryLine Facts Length: 80 mm Width: 12 mm For probe pins: 4–5 mm Colour: green / red Special features Material: anodised aluminium Double‑sided Go/No‑Go indication For insertion of probe pins Compact format for fixtures and jigs FAQ What size of probe pins does the holder accept? The probe pin holder accepts 4–5 mm probe pins and is designed to secure standard probe pins of that diameter for Go/No‑Go checks. Can the holder be used directly in gauge assemblies? Yes. The Metav IndustryLine probe pin holder is compact and intended for integration into gauge fixtures and inspection jigs where a clear Go/No‑Go indication is required. What material is the holder made from and how durable is it? The holder is manufactured from anodised aluminium, providing corrosion resistance and a durable surface suitable for regular workshop handling. What is the article number for ordering or reference? Refer to article number M318.568.5 when enquiring about the probe pin holder Go/No‑Go from Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4–5mm Test Probe Holder For Probe Pins, Aluminium Anodised Green Single‑Sided - Metav IndustryLine
Benefit from the combination of robust aluminium construction, anodised corrosion resistance and compact dimensions for dependable probe mounting in fixtures. Order the (Test pin holder GO, 4–5 mm green socket, single-sided) directly via (Metav Werkzeuge) or ask our consultants if needed. Test pin holder GO — aluminium holder with 4–5 mm green socket (Metav IndustryLine) The Test pin holder GO is a compact, single-sided aluminium holder engineered to accept probe pins 4–5 mm, ideal for fixtures and gauge assemblies where secure, repeatable mounting is required. Aluminium, hard‑anodised surface Fits probe pins Ø 4–5 mm Compact 55 mm length for tight fixtures Single‑sided green socket for identification Secure mounting for reproducible measurements The holder is machined from aluminium and finished by anodising, providing a stable, corrosion‑resistant clamping point for probe pins. Its construction reduces micro‑movement under normal handling, which supports consistent repeatability in comparative and go/no‑go arrangements. By accepting pins of 4–5 mm diameter, the component bridges common probe dimensions used in inspection jigs and test fixtures, allowing standardised parts to be mounted without additional adapters. The combination of material choice and surface treatment balances light weight with dimensional stability for routine workshop conditions. Compact design tailored to constrained fixtures With a nominal length of 55 mm and a width of 12 mm, this holder is intended for assemblies where space is at a premium. The single‑sided configuration simplifies installation in one‑direction mounting situations and reduces the part count in tight gauge constructions. The green socket provides immediate visual identification on crowded fixture plates, aiding rapid setup and minimising assembly errors. Because the unit is designed to receive standard probe pins, it integrates easily into pre‑existing jig families and shortens fixture build time. Practical benefits for production and inspection The accessory supports faster assembly and easier maintenance in small series production and quality control processes. Fewer bespoke adaptors are required when holders match common probe pin diameters, which reduces downtime and simplifies spare‑parts logistics. The anodised finish helps withstand routine handling in workshop environments while preserving the precision fit. In addition to mechanical reliability, the component contributes to predictable measurement outcomes when combined with consistent probe geometry and mounting practices. For fixture optimisation and dependable probe pin mounting, request the Metav IndustryLine Test Pin Holder GO and contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply Technical data Article number: M318.566.5 Item label: Messstift-Halter, GO, 4 - 5 mm Grüne Aufnahme, einseitig Brand: Metav IndustryLine Facts Width: 12 mm Length: 55 mm Probe pin diameter: 4–5 mm Colour: green Special features Material: aluminium Surface: anodised Mounting: single-sided socket Application: for probe pins (test pins) 4–5 mm FAQ What probe pin diameters are compatible with this holder? The holder accepts probe pins with diameters between 4 mm and 5 mm, making it suitable for common test pin sizes used in inspection fixtures. Is the socket identified for rapid visual sorting? Yes, the green socket provides a clear visual marker to aid identification and reduce assembly errors on multi‑element fixtures. Can this component be used in lightweight portable gauges? The aluminium construction and compact footprint make the holder well suited to lightweight gauge assemblies where reduced mass is beneficial. Which brand supplies this holder and how is the item referenced? This part is part of the Metav IndustryLine range and is listed under article number M318.566.5 for ordering and stock reference. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5,01-6mm Messstift-Sätze, Werkstatt-Ausführung, ± 0,004 mm
- aus Spezial-Stahl Werkstatt-Ausführung, Länge 50 mm Genauigkeit < ± 0,004 mm im Behältnis/KastenTechnische Daten- Messbereich: 5,01-6mm- Stufung: 0,01mm- Anzahl/Satz: 100
5-14mm Probe Holder With Good/Reject Indication - Metav IndustryLine
Take advantage of a compact, reliable gauge accessory that combines clear visual sorting with broad pin compatibility — ideal for inline inspection and fixture use. Order directly via Metav Werkzeuge or consult our specialists for application advice. Measuring pin holder M318.563 — holder for 5.0–14.0 mm pins with 'Good' / 'Reject' marking (Metav IndustryLine) The Measuring pin holder M318.563 is a compact gauge accessory for mounting measuring pins from 5.0–14.0 mm, designed for rapid visual sorting and integration into inspection setups. Secure mounting for 5.0–14.0 mm pins Clear 'Good' and 'Reject' visual markings Compact 145 mm length for tight spaces Lightweight 0.1 kg for easy fixture use Faster, more reliable visual inspection and sorting This holder converts a single measuring pin into an immediate pass/fail indicator, reducing handling time and human error during routine checks. Fitted for 5.0–14.0 mm pins, the unit provides consistent seating and visible status via the 'Good' / 'Reject' marking, which supports quick decision-making on the shop floor. By standardising the visual cue, the holder improves throughput and lowers the risk of rework without altering existing measurement methods. Practical integration into gauges and fixtures With a 145 mm overall length and a 0.1 kg weight, the holder is designed for easy positioning in compact fixtures or mobile inspection rigs. Its form factor supports repeatable placement, helping maintain repeatability in comparative checks and go/no‑go workflows. The compact dimensions make it suitable where space is limited, while the lightweight nature simplifies manual handling and reduces inertia in automated feeders. Proven supply reliability and traceable quality The product is part of the Metav IndustryLine, benefitting from Metav’s European distribution and quality filter based in Emmerich. Metav combines broad product availability with sector expertise to ensure reliable supply for production and service workshops; the company’s track record of thousands of professional customers underlines this. For technical clarifications or configuration options relating to inspection integration, Metav’s consultants can provide targeted guidance to match the holder to measurement routines. Contact Metav Werkzeuge for tailored advice and fast delivery from our Emmerich stock — our team will confirm suitability of the Metav IndustryLine measuring pin holder M318.563 for the intended inspection setup Technical Data Article number: M318.563 GTIN: 4054469167145 Label: Measuring pin holder, for measuring pins 5 - 14 mm with "Good" and "Reject" marking Manufacturer: Metav IndustryLine Facts Length: 145 mm Weight: 0.1 kg Tariff number: 90173000 Special features Suitable for measuring pins 5.0–14.0 mm Distinct 'Good' and 'Reject' visual marking for pass/fail sorting Categories: Measuring pins; Gauges FAQ Which pin diameters fit this holder? The measuring pin holder M318.563 accepts measuring pins from 5.0–14.0 mm, allowing use with a broad range of standard gauge pins. How does the 'Good' / 'Reject' marking work in practice? The clear 'Good' / 'Reject' marking on the holder provides an immediate visual cue during inspection runs, supporting fast sorting without additional tools. Can the holder be integrated into existing fixtures or test rigs? Yes. The holder’s 145 mm length and 0.1 kg weight make it suitable for mounting in compact fixtures, jigs or mobile inspection stations where repeatable pin seating is required. What identifiers should be used when ordering or referencing the product? Reference article number M318.563 and GTIN 4054469167145 for precise identification of the Metav IndustryLine measuring pin holder. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5-6mm Gauge Pin Set 21-Piece 70mm Steps 0.05mm Plastic Case - Metav IndustryLine
Precision checking made simple: the 21-piece gauge pin set combines a 5.00–6.00 mm measuring range, 0.05 mm graduation and 70 mm pin length to deliver dependable bore verification; supplied in a protective case for safe transport. Order the gauge pins directly via Metav Werkzeuge or consult our advisors for specification support. Metav IndustryLine Gauge Pin Set M318.825 — 21-piece precision gauge pins, 5.00–6.00 mm, 0.05 mm steps The gauge pin set is a workshop-grade checking tool intended for accurate diameter verification and tolerance control in machine shops, toolrooms and inspection benches. 21-piece precision pin set Diameter range 5.00–6.00 mm 0.05 mm diameter increments Supplied in protective case Consistent tolerance checks for production control The set provides a compact solution for stepwise diameter verification: with 0.05 mm increments across the 5.00–6.00 mm span, operators can perform fine-grain checks of bores and fits with predictable resolution. This gradation supports rapid identification of out-of-tolerance conditions during incoming inspection or in-process control, reducing rework and increasing throughput. The logical sequence of pin diameters simplifies selection and speeds routine gauging tasks without compromising clarity. Durable construction built for everyday workshop use Each pin is manufactured from special steel chosen for wear resistance and dimensional stability under repeated use. The 70 mm pin length balances accessibility and rigidity for typical bore depths encountered in mechanical engineering and mould components. Thanks to the choice of material and production tolerances, the pins retain geometry under standard handling, so measurement repeatability is improved compared with ad-hoc checking methods. The construction supports reliable, long-term use in busy shop-floor environments. Practical set design to streamline inspection workflows Containing 21 individual pins in regular steps, the set covers small-step verification without excess inventory. The organised layout and protective case keep pins sorted and protected during transport and storage, reducing the risk of damage and measurement uncertainty. At 0.95 kg total weight, the kit remains portable for bench or field use while offering sufficient mass for stable handling. The compact format is particularly useful for service engineers and quality technicians who require a comprehensive, yet transportable, gauging solution. Typical applications and compatibility with standard metrology tasks The pins are suited to bore checking, gauge reference tasks and quick go/no-go verification when integrated into inspection routines. Their diameter progression makes them appropriate for tool and die shops, maintenance departments and quality control laboratories where incremental checks are frequent. The set complements verifiers and comparator fixtures, fitting naturally into standard metrology workflows and supporting documentation of dimensional checks as part of quality assurance procedures. Choose Metav IndustryLine for reliable bore verification — request the M318.825 gauge pin set from Metav Werkzeuge or contact our technical advisers at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice and availability. Technical data SKU: M318.825 GTIN: 4054469181974 Weight: 0.95 kg Core specifications Measuring range: 5.00–6.00 mm Graduation: 0.05 mm Length: 70 mm Pieces per set: 21 Materials & features Material: Special steel Supplied in protective case Category: Gauges (Lehren) FAQ What diameter range does the set cover? The gauge pin set covers diameters from 5.00 to 6.00 mm in 0.05 mm steps for fine incremental checking. How many pins are included and what is the SKU? The kit comprises 21 pins; the item is supplied as Metav IndustryLine M318.825. What material are the pins made from? The pins are made of special steel chosen for durability and dimensional stability under workshop conditions. Is a case included for transport and storage? Yes, the M318.825 set is supplied in a protective case to keep pins organised and secure during transport. Which workshop tasks is this set best suited to? The set is tailored to bore checking, tolerance verification and routine inspection work in machine shops, toolrooms and maintenance departments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5-6mm Test Pin Holder For 5–6mm Pins Green Aluminium Anodised, Single-Sided - Metav IndustryLine
Take advantage of a lightweight, anodised aluminium construction and a secure 5–6 mm socket that simplifies probe-pin mounting for repeatable measuring setups; order directly via Metav Werkzeuge or consult the Metav team for application advice. Probe Pin Holder 'GO' (5–6 mm, single-sided) – Metav IndustryLine, anodised aluminium socket Probe Pin Holder 'GO' is a compact accessory for precise positioning and retention of measuring pins in inspection and fixture setups across machine shops and quality departments *Anodised aluminium construction, corrosion-resistant *Holds probe pins 5–6 mm securely *Single-sided green socket for clear identification Durable, lightweight design for stable probe mounting The holder is manufactured from anodised aluminium, which combines lightweight handling with improved surface hardness and corrosion resistance for workshop environments. That choice of material reduces mass on moving assemblies while maintaining the rigidity needed for repeatable measurements. The 5–6 mm socket accepts common measuring pins and provides a secure fit, eliminating slippage during clamping or inspection operations and contributing to consistent measurement outcomes. Simple integration into inspection routines and fixtures As a dedicated mounting accessory for probe pins, the component serves as a straightforward interface between the measuring pin and test fixture. The single-sided socket keeps the pin orientation defined, which helps to reduce setup time and assembly errors during batch inspections. For users accustomed to standard metrology practice, the holder supports reliable alignment and can be combined with existing fixture hardware to streamline the gauging process and maintain throughput. Clear identification and maintenance benefits for everyday use The green socket provides immediate visual identification on crowded benches, aiding organisation in busy workshops. The anodised finish resists wear from repeated pin changes and cleaning, so the holder retains its fit and appearance over time. Supplied as a simple, robust accessory, it reduces downtime associated with improvised pin mounting and fits well into the Metav IndustryLine range that focuses on accessible, dependable precision for industrial customers For reliable probe-pin mounting choose the Metav IndustryLine probe pin holder with anodised aluminium socket and contact Metav Werkzeuge in Emmerich for technical guidance and supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M318.566.6 SKU: M318.566.6 Product name: Probe pin holder "GO", 5–6 mm green socket, single-sided Manufacturer: Metav IndustryLine Facts Width: 12 mm Length: 55 mm Compatible pin diameter: 5–6 mm Special features Anodised aluminium construction Green single-sided socket For mounting measuring/probe pins Compact accessory for inspection fixtures Suitable for workshop and quality-control use FAQ Is the holder compatible with 5 mm probe pins? The probe pin holder accepts probe pins with diameters in the 5–6 mm range and secures them for stable mounting in inspection fixtures. Can the socket be used on both sides? This version is single-sided; the single-sided configuration provides a defined orientation for repeatable setups. What material is the holder made from? The holder is produced from anodised aluminium, offering lightweight handling and corrosion resistance suitable for workshop environments. Is the product part of the Metav IndustryLine range? Yes, the probe pin holder is supplied under the Metav IndustryLine designation and is intended for integration with common measuring fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.00mm Gage Pin 50mm Length ±0.001mm, Workshop Finish - Metav IndustryLine
This workshop-grade gauge pin combines 5.00 mm nominal diameter with an exceptional ±0.001 mm tolerance and a 50 mm length to secure reliable end‑dimension checks; its special steel construction supports long-term durability and repeatable results. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.500 — single test pin, 5.00 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.500 is a single precision test pin designed for end‑dimension verification and alignment tasks in workshop inspection routines Workshop-grade execution Diameter 5.00 mm, tolerance ±0.001 Length 50 mm for precise reach Made from special steel, durable finish Consistent measurement accuracy that reduces rework The core advantage of this precision test pin is its reliable tolerance of ±0.001 mm, which ensures repeatable results when checking final dimensions. In inspection workflows, a small systematic error can cascade into scrap or rework; the finely machined 5.00 mm diameter and the tight tolerance minimise that risk by providing a stable reference for plug checks, alignment and go/no‑go applications. The controlled tolerance also facilitates straightforward statistical process control and supports efficient decision‑making on the shop floor. Robust construction for everyday workshop use Manufactured from special steel, the pin offers resistance to wear and maintains a stable contact geometry under regular handling. The 50 mm shank length provides access to recessed bores and end faces while keeping handling intuitive during manual checks. The workshop‑grade execution balances durability with accurate geometry, so routine use in production environments does not compromise the measuring edge. Small mass and compact dimensions make the pin simple to position and index during repeated checks. Practical integration into inspection routines This single test pin is suitable for repetitive end‑dimension verification, assembly alignment and fixture setting where a compact precision reference is required. The simple geometry supports quick visual inspection and, where applicable, integration into custom fixtures or measuring jigs. Traceable identification via SKU and barcode systems helps maintain inventory and measurement traceability within quality procedures while the design keeps handling and interchangeability straightforward for machinists and quality technicians. Choose Metav IndustryLine’s gauge pin M323.500 for dependable end‑dimension checks and contact Metav Werkzeuge in Emmerich for tailored advice and quick supply from the European quality hub. Technical Data SKU: M323.500 GTIN: 4061905059735 Category: Messstifte Facts Diameter: 5.00 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.011 kg Special features Workshop execution Material: special steel Single test pin design FAQ What applications suit this gauge pin best? This gauge pin is intended for end‑dimension checks, assembly alignment and fixture setup; the M323.500 is optimised for repeatable plug‑type measurements in workshop inspection routines. How precise is the measurement reference provided by the pin? The pin offers a tolerance of ±0.001 mm, making it suitable where high repeatability and tight control limits are required during final part verification. Which material is used for the test pin and why does it matter? The pin is made from special steel, chosen to preserve contact geometry under repeated use and to provide resistance to wear in a production environment. Can the pin be used in custom fixtures or jigs? Yes, the compact single‑pin design and standard dimensions of the M323.500 facilitate integration into fixtures and jigs for repeatable positioning and measurement. Is the gauge pin suitable for deep or recessed bores? The 50 mm length provides sufficient reach for many recessed checks while remaining easy to handle for manual inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.01-6 mm Gauge Pin Set 101 pcs Step 0.01 mm With Pin Holder In Plastic Case - Metav IndustryLine
Take advantage of precise, repeatable checking with a finely graded gauge-pin range and robust special-steel construction; the kit’s 0.01 mm gradation and declared 0.004 mm accuracy ensure reliable acceptance testing and reduced rework. Order directly via Metav Werkzeuge or consult the Metav team for application advice and delivery details. Metav IndustryLine Gauge Pin Set M318.575 – 5.01–6.00 mm, 0.01 mm gradation The gauge pin set M318.575 is engineered for precision fit and hole inspection in workshop and quality‑control environments, offering a graded range for fast go/no‑go checks and incremental measurement tasks. Precision 0.01 mm gradation Range 5.01–6.00 mm for fine fit checks Supplied with pin holder for secure handling Special steel construction for daily use Reliable accuracy that speeds up inspection The graded pins deliver a 0.01 mm gradation, enabling fine increment checks across the measured interval, while the specified 0.004 mm accuracy supports consistent decision making at inspection stations. Such resolution allows operators to verify bores and fits without repeated adjustments, which translates directly into fewer scrap parts and faster throughput. In practice, the controlled increments simplify comparative gauging and limit subjective judgement, so routine checks become reproducible and auditable. Built for workshop handling and longevity Manufactured from special steel, the pins combine surface hardness and dimensional stability for everyday use in production environments. The included pin holder supports safe handling and accurate seating of individual pins, reducing the risk of damage and easing repetitive measurements. The compact design suits bench use and portable inspection kits, where resilient materials and straightforward handling reduce downtime and facilitate quicker inspection cycles. Practical design for efficient quality workflows Covering the 5.01–6.00 mm interval with fine steps, the set is ideal for small bore verification, gauge‑block cross‑checks and assembly controls where tight fits are common. The graded bank of pins integrates neatly with established workshop routines and complements other metrology tools used in mechanical and metalworking trades. For applications where traceable calibration is required, please enquire with Metav Werkzeuge about available calibration options and certificates that match specific quality‑assurance protocols. Contact Metav Werkzeuge for tailored advice on process integration and suitability of the Metav IndustryLine gauge pins for specific inspection tasks; colleagues in Emmerich are available to discuss delivery and technical fitments. Technical Data Article number: M318.575 GTIN: 4054469168296 Manufacturer: Metav IndustryLine Facts Measuring range: 5.01–6.00 mm Graduation: 0.01 mm Accuracy: 0.004 mm Weight: 2.25 kg Length (pin holder): 50 mm Special features Material: Special steel Supplied with pin holder Set format for graded inspection FAQ What measurement range is covered by the gauge pins? The gauge pins cover a measuring range of 5.01–6.00 mm, suitable for fine bore and fit checks with small incremental steps. How fine are the graduations and what accuracy can be expected? The set offers a graduation of 0.01 mm and a declared accuracy of 0.004 mm, enabling precise incremental verification of bores and fits. Is the kit suitable for daily workshop use? Yes, the pins are manufactured from special steel and supplied with a pin holder, offering robust handling and suitability for routine inspection tasks. Can this set be used alongside other inspection equipment? The graded pins integrate well with standard workshop metrology tools and provide a fast method for comparative gauging during assembly or quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.01-6mm Gauge Pin Set 100pcs Step 0.01mm Special Steel, Case - Metav IndustryLine
Take advantage of the combination of high repeatability, fine 0.01 mm grading and robust special-steel construction for reliable go/no-go and inspection workflows; order the gauge pin set directly via Metav Werkzeuge or ask the consultants for tailored advice. Gauge pin set M318.555 – 5.01–6.00 mm, 0.01 mm grading (Metav IndustryLine) The gauge pin set M318.555 provides precision inspection pins for gauging and verification of bore diameters and fits in the 5.01–6.00 mm range, suitable for quality control and assembly verification in small-part manufacturing. 100-piece set graded at 0.01 mm Precision range 5.01–6.00 mm Made from special hardened steel Supplied in a protective transport case Consistent bore inspection with measurable benefits The graded pins in this set deliver a systematic way to verify hole diameters and clearances. With 0.01 mm increments and a stated accuracy of ±0.002 mm, the set minimises guesswork during pass/fail checks and reduces rework cycles. The pins’ uniform geometry and finish support repeatable seating in bores, so measurement variance is defined by the instrument rather than by operator feel. This improves throughput in inspection benches and speeds decisive quality judgments, making the set a pragmatic choice where traceable, repeatable checks are required. Robust construction for workshop use and longevity Manufactured from special steel, the pins withstand frequent handling and retain dimensional stability across repeated use. The material choice balances hardness and resistance to surface damage, preserving the pin form that determines fit. Each pin has a nominal length of 50 mm, providing adequate engagement in typical small bores while remaining easy to handle during manual inspection. The set’s weight and packaging further reflect a workshop-ready approach: organised storage minimises loss and protects the profiles during transport and daily use. Integration into quality workflows and practical application The set is conceived for direct use in quality control, assembly verification and first-article inspection. The clear gradation simplifies increment searches and reduces time spent interpolating sizes; in documentation it supports unambiguous reporting of measured clearance or fit. For production lines, the graded pins act as a fast comparative tool alongside micrometres or bench bore gauges, offering a straightforward method to confirm conformity before more elaborate measurement steps. The compact, graded format supports batch sampling strategies without sacrificing resolution for small-diameter components. For reliable gauging solutions and application advice, contact Metav Werkzeuge in Emmerich for tailored recommendations or to secure the M318.555 gauge pin set via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M318.555 GTIN: 4054469129389 eClass: 21170231 Tariff code: 90173000 Numbers / Core technical data Diameter range: 5.01–6.00 mm Increment: 0.01 mm Accuracy: ±0.002 mm Pieces per set: 100 Length (nominal): 50 mm Weight: 2.6 kg Special features Material: Special steel Grading: 0.01 mm steps Set type: graded gauge pins for bore inspection Supplied in protective transport case Category: Gauge pins / Gauging FAQ What precision can be expected from the gauge pins? The M318.555 gauge pin set is specified with an accuracy of ±0.002 mm and graded at 0.01 mm, providing reliable repeatability for small-bore inspection tasks. Are the pins suitable for routine workshop inspection? Yes, the set is designed for workshop and production-floor use; the special steel construction and protective case support frequent handling and straightforward organisation. How is the set organised and what does it contain? The set contains 100 graded pins covering the 5.01–6.00 mm range in 0.01 mm steps, presented for efficient selection during inspection or assembly checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.01mm Precision Test Pin ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, sub‑micrometre accuracy and compact length for reliable end‑dimension checks; order directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.501 — Test pin, 5.01 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A gauge pin M323.501 designed as a workshop test pin for precise end‑dimension verification and fixture checks in inspection and production environments Workshop version for robust use Diameter 5.01 mm with ±0.001 mm accuracy 50 mm overall length for standard fixtures Made from special steel for wear resistance Reproducible measurements through defined tolerance control The primary advantage of this workshop test pin is its ±0.001 mm tolerance, which delivers highly reproducible end‑dimension checks and reduces uncertainty during acceptance measurements. With a defined diameter of 5.01 mm, the pin serves as a reliable datum for go/no‑go checks, positional references and plug‑gauge validations. The clearly specified accuracy enables quality engineers and inspection staff to base pass/fail criteria on measurable tolerances rather than estimations, shortening decision cycles and lowering the rate of costly rework. The compact form factor also simplifies the handling when several reference points are required in succession. Durable construction for everyday inspection and fixture use Built in a workshop version and made from special steel, the pin resists abrasive wear and maintains its diameter under regular use, prolonging service intervals and preserving measurement integrity. At an overall length of 50 mm and a nominal diameter of 5.01 mm, the component is easy to seat in standard fixtures and jigs, while its low mass (approx. 0.011 kg) minimises inertia during manual handling. The material selection focuses on a balance of hardness and toughness so that the gauge pin withstands repeated contact with mating parts and retains its calibration over an extended service life. Easy integration into inspection workflows and traceability Delivered as a single, ready‑to‑use test pin with a clear article identifier (M323.501), the component integrates cleanly into existing measurement routines and tool‑sets. The compact geometry makes it suitable for slot checks, bore verification and end‑measurement tasks where a precise reference is required. Traceability is supported by the product identifiers included in the technical data below, simplifying inventory and inspection record‑keeping. For specialised applications or batch requirements, Metav IndustryLine offers consultancy to match variants and handling practices to the shop‑floor environment. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine gauge pin M323.501 can be specified for your inspection setup or to request a tailored quotation from the Emmerich quality team. Technical data Article number: M323.501 GTIN: 4061905059742 SKU: M323.501 Numbers / Core technical data Diameter: 5.01 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.011 kg Designs / Special features Material: special steel Workshop execution Single piece test pin Category: gauge pins FAQ What is the declared tolerance of the test pin? The declared tolerance is ±0.001 mm for the gauge pin M323.501, suitable for fine end‑dimension verification. Which material is used for this gauge pin? The pin is manufactured from special steel to provide wear resistance and stable dimensional performance during repeated use. Is the length suitable for fixture and jig applications? Yes, the 50 mm overall length is intended for standard fixtures, offering a balance between reach and handling ease. Can this pin be used for positional and bore checks? The gauge pin M323.501 is suitable for bore verification, positional referencing and simple go/no‑go end checks where a fixed diameter reference is required. How is the product identified for inventory and traceability? Identification is provided via SKU M323.501 and GTIN 4061905059742 to support traceability and record‑keeping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.02mm Gauge Pin, ±0.001 mm, 50mm Length, Workshop Version - Metav IndustryLine
A high‑precision gauge pin that pairs compact dimensions with exceptional tolerance: 5.02 mm diameter and ±0.001 mm accuracy in a 50 mm length give reliable results for end‑measurements and fit checks. Combine repeatable metrology performance and robust workshop construction. Order the gauge pin M323.502 directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.502 — single precision pin, 5.02 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A gauge pin M323.502 engineered for precision end‑measurements and fit verification in workshop and quality control settings Workshop version construction Diameter 5.02 mm ±0.001 Length 50 mm for compact checks Special steel for long service life Accuracy where dimensional certainty counts The principal advantage of this tool is its precision: a nominal 5.02 mm diameter with a tight ±0.001 mm tolerance offers consistent results when assessing bore sizes, mating fits or end‑dimensions. Such a tolerance equates to micrometre‑level control, reducing uncertainty in pass/fail decisions and supporting reliable assembly checks. The compact 50 mm length keeps handling straightforward while maintaining the straightness and surface finish required for repeatable contact readings. Built for practical workshop use and durability Designed as a workshop version, the pin balances fine measuring ability with everyday robustness. Manufactured from special steel, the component resists wear in typical inspection routines and preserves the measuring face geometry under repeated use. The small mass and rigid profile facilitate rapid placement and withdrawal during batch inspections, while the corrosion‑resistant surface treatment improves longevity and reduces maintenance intervals, supporting uptime on the shop floor. Practical applications and measurement benefits This single gauge pin is intended for end measurements, quick fit checks, and verification of drilled bores or reamed holes in jigs and fixtures. Its nominal diameter and tolerance make it suitable as a reference probe for functional tests or for checking clearance and interference fits. When combined with calibrated ring gauges or fixture references, the pin improves the repeatability of pass/fail assessments and supports consistent quality control routines without introducing unnecessary handling complexity. Contact Metav Werkzeuge for specialist advice on integrating the M323.502 gauge pin into inspection workflows or for assistance selecting complementary gauges and calibration options Technical data SKU: M323.502 GTIN: 4061905059759 Brand: Metav IndustryLine Feature: Workshop version Diameter: 5.02 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.011 kg Material: Special steel Typical use: End measurements and fit verification Design: Single gauge pin, precision ground Intended environment: Workshop and quality control FAQ What tolerance and diameter does this gauge pin provide? The gauge pin M323.502 from Metav IndustryLine is specified at 5.02 mm diameter with a tolerance of ±0.001 mm, suited to high‑precision fit checks. Can this pin be used for checking reamed bores and mating fits? Yes. The design and tolerance of the M323.502 make it appropriate for verifying reamed bores, mating fits and other end‑measurement tasks in workshop inspection routines. How should the pin be cared for to maintain accuracy? Store the pin in a clean, dry location and protect the measuring face from knocks and contamination. Light lubrication after cleaning will help preserve surface condition; avoid abrasive cleaning agents. Is the M323.502 suitable for repeated batch inspections? The workshop construction and special steel composition support repeated use in batch inspections while maintaining geometric stability and repeatability. Which accessories or complementary gauges work well with this pin? Use the M323.502 alongside calibrated ring gauges, gauge blocks or fixture plates to form reference assemblies for functional testing and comparative inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.03mm Gauge Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of workshop-grade repeatability and the narrow ±0.001 mm tolerance combined with a compact 50 mm length for reliable end‑measurement checks; supplied in a protective transport case for safe handling. Order the gauge pin directly via Metav Werkzeuge or consult our experts if additional information is required. M323.503 Gauge Pin – Metav IndustryLine, Ø 5.03 mm, ±0.001 mm The M323.503 gauge pin is a workshop‑grade precision pin designed for end‑measurement checks, assembly verification and press‑fit inspection tasks in production and quality control environments. Workshop‑grade accuracy ±0.001 mm Diameter 5.03 mm precision fit 50 mm special steel measuring shaft Supplied in protective transport case Consistent fit for tight tolerances A narrow tolerance of ±0.001 mm makes this gauge pin ideal where fit and clearance control are critical. The defined 5.03 mm diameter provides a repeatable reference for pass/fail checks and comparative measurements; this reduces setup iterations and supports stable process control. By using a single, traceable reference pin rather than repeated trial adjustments, downtime during inspection cycles is minimised. Built for repetitive workshop use and safe storage The 50 mm shaft uses special steel chosen for dimensional stability under routine handling, offering a balance between stiffness and compactness. The workshop variant is optimised for daily inspection tasks and is delivered in a protective transport case, which protects the pin from contamination and impacts during storage and transit. The small mass (approx. 0.011 kg) keeps handling simple and quick when multiple checks are required on the shop floor. Clear purpose and practical applications This precision pin serves as a straightforward end‑measure reference for bore validation, assembly control and final inspection steps. As a compact, single‑piece test pin it integrates easily into established inspection jigs and tactile gauges, supporting consistent go/no‑go decisions. The robust specification helps maintain process reliability and provides production teams with measurable evidence for quality documentation. For precise end‑measurement solutions from Metav IndustryLine, contact Metav Werkzeuge for availability, delivery options and technical advice at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: M323.503 GTIN: 4061905059766 Manufacturer: Metav IndustryLine Category: Messstifte Facts Diameter: 5.03 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.011 kg Special features Workshop execution Supplied in protective transport case Material: Special steel Story trigger: endmasse eClass: 21170231 FAQ What tolerance does this gauge pin offer? The M323.503 gauge pin is specified at ±0.001 mm, providing very fine repeatability for tight clearance checks. Which applications are suitable for this test pin? The pin is suitable for end‑measure checks, bore validation and assembly verification where a precise reference diameter is required. Is the pin supplied ready for safe transport and storage? Yes, the gauge pin is supplied in a protective transport case to prevent damage and contamination during handling. What material is used for the measuring shaft? The shaft is manufactured from special steel chosen for dimensional stability under routine workshop use. How is the product identified for ordering and inventory? The article is listed as M323.503 with GTIN 4061905059766 for clear identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.04mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of tight tolerance (±0.001 mm), special-steel construction and a compact 50 mm length for repeatable end-dimension checks in the workshop; order the gauge pin directly via Metav Werkzeuge or contact our technical advisers for application guidance. Gauge pin M323.504 — Single precision test pin, 5.04 mm diameter, ±0.001 mm The Gauge pin M323.504 is a single precision test pin intended for reliable inspection of bores and end dimensions in workshop and inspection settings. Single gauge pin 5.04 mm diameter Tolerance ±0.001 mm for tight fits 50 mm overall length for consistent probing Workshop version with robust finish Repeatable measurement accuracy for tight fits The compact test pin delivers repeatable accuracy thanks to a specified deviation of ±0.001 mm, which supports fine acceptance decisions and reduces costly rework. With a nominal diameter of 5.04 mm, the pin is suitable for end-dimension checks where small clearance variations matter; calibrated measuring chains and comparative gauges benefit from such small tolerances by providing consistent pass/fail results across batches. Robust design for everyday workshop use Designed as a workshop version, the pin is manufactured from special steel to withstand handling and routine use on the shop floor. The 50 mm length offers sufficient reach for common inspection tasks while keeping the component rigid during measurement. Delivered in a protective case for transport and storage, the test pin maintains its surface quality and geometric integrity between uses, which preserves measurement reliability and extends service life. Easy integration into inspection workflows The single-pin format is straightforward to incorporate into manual and fixture-based inspection processes. Its small mass and compact form make handling efficient in repetitive checks, speeding throughput without compromising precision. Using a defined test pin of known diameter simplifies traceability in production documentation and supports consistent assembly fits across production runs. Choose the Metav IndustryLine gauge pin M323.504 for secure end-dimension verification in workshop environments and contact Metav Werkzeuge for tailored application advice or ordering support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.504 GTIN: 4061905059773 Manufacturer: Metav IndustryLine Facts Diameter: 5.04 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.011 kg Special features Material: Special steel Workshop version Supplied in protective case FAQ What is the declared tolerance of this gauge pin? The M323.504 gauge pin is specified with a tolerance of ±0.001 mm, enabling tight acceptance criteria for precision inspections. For which inspection tasks is this test pin suitable? The single test pin is suitable for bore checks, end-dimension verification and comparative gauging in workshop and inspection environments where small diameter tolerances are critical. What material is the pin made from and how durable is it? The M323.504 is manufactured from special steel and produced as a workshop version, offering robust durability for routine use. What are the pin's dimensions and mass? Nominal diameter is 5.04 mm, overall length is 50 mm and the mass is approximately 0.011 kg. Is the pin supplied ready for transport and storage? The gauge pin is supplied in a protective case to preserve surface quality and geometry during transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.05mm Test Pin, Single, ±0.001mm Accuracy, Length 50mm, Workshop Finish - Metav IndustryLine
Taking advantage of the combination of workshop‑grade robustness, ±0.001 mm accuracy and a compact 50 mm length ensures reliable end‑measure checks in daily inspection routines — order this precision gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 5.05 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The gauge pin, single, 5.05 mm ±0.001 mm, 50 mm length is a compact, workshop‑grade reference pin for precise end‑measure and fit checks in inspection and fixture set‑up. Workshop version for robust use High tolerance: ±0.001 mm Diameter 5.05 mm, length 50 mm Delivered in transport case Reliable measurement where tight tolerances decide A compact gauge pin with a declared tolerance of ±0.001 mm provides a clear technical advantage where repeatable go/no‑go decisions are required. The extremely fine tolerance corresponds to high‑precision gauges used for end measurements and fits; in practice this reduces rework and speeds up pass/fail decisions on the shop floor. The stated accuracy should be interpreted as the manufacturing tolerance of the pin, ensuring it can serve as a stable reference for short‑range checks and comparative measurements. When paired with calibrated ring gauges or micrometres, the pin acts as a simple, direct measure for bore and hole verification. Durable design tailored to workshop routines Constructed from special steel, this workshop version is intended for regular handling and quick inspection cycles. The material choice balances hardness and wear resistance, so the gauge retains form over repeated seating and insertion operations. With a 50 mm overall length and a 5.05 mm diameter, the component is compact enough for bench use yet long enough to reach into slightly recessed features. Supplied in a transport case, the pin remains protected during storage and transit, reducing the risk of dings that would compromise measurement integrity. The modest mass contributes to easy handling during serial checks without introducing operator fatigue. Simple integration into quality control workflows As a single reference pin for end‑measure tasks, this item integrates directly into existing inspection routines and fixture checks. The product supports quick tactile verification and comparative gauging; technicians can use it to check bore fits, set gauges, or verify plug clearances. Describing the part as a precision reference helps planners decide its role: whether as a temporary go/no‑go aid, a setup reference in jigs, or a control artefact for routine dimensional checks. The compact format and workshop specification make it particularly suitable where a reliable, ruggedised pin is needed rather than delicate laboratory artefacts. For workshop‑grade inspection with ±0.001 mm tolerance, contact Metav Werkzeuge for purchasing and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.505 GTIN: 4061905057045 Label: Prüfstift, einzeln, 5,05mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 5.05 mm Length: 50 mm Tolerance / accuracy: ±0.001 mm Weight: 0.011 kg Special features Material: special steel Workshop version Supplied in a transport case FAQ What is the intended use for this gauge pin? The gauge pin (single, 5.05 mm, ±0.001 mm, 50 mm length) is intended for end‑measure checks, bore verification and fixture set‑up in workshop inspection routines. Is the gauge pin suitable for regular shop‑floor use? Yes, the workshop version and special steel construction make this pin suitable for frequent handling and routine measurements on the shop floor. How is the gauge pin protected during storage and transport? The item is supplied in a transport case to protect the precision surface from damage during storage and transit. Can this pin be used as a reference for calibration chains? The pin serves as a stable reference for comparative checks and can be part of a calibration chain when used alongside calibrated ring gauges or micrometres. What product identifiers should be quoted when ordering? Please quote SKU M323.505 and GTIN 4061905057045 when enquiring or ordering this gauge pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.06mm Gauge Pin, ±0.001mm Accuracy, Length 50mm, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of high repeatability and robust workshop design to streamline end‑measure inspections; the precise ±0.001 mm tolerance and compact dimensions ensure consistent fit‑up and reduced rework. Order the gauge pin directly via Metav Werkzeuge or ask our consultants for application advice. M323.506 Gauge Pin — 5.06 mm, ±0.001 mm, 50 mm (Metav IndustryLine) The M323.506 gauge pin is a workshop‑grade test pin designed for precise end‑measure checks and fixture set‑up in industrial metrology and quality control. Workshop-grade precision ±0.001 mm tolerance Diameter 5.06 mm for end-measure applications 50 mm length for fixture and gauge use Made from special steel for robust performance Repeatable accuracy for critical inspection tasks High‑precision inspection starts with reliable reference parts. The gauge pin offers a ±0.001 mm manufacturing tolerance on a nominal 5.06 mm diameter, which translates to tighter control of go/no‑go criteria and improved interchangeability in assemblies. In practice, this level of accuracy reduces sorting and rework rates because measured clearances and fits correspond closely to intended design values. The compact form and controlled geometry make the pin suitable for end‑measure applications and fine alignment tasks where positional certainty matters. Built for everyday workshop use and resilience Engineered as a workshop version, the pin balances dimensional control with mechanical resilience. The body is made of special steel, providing wear resistance under repeated seating and withdrawal in gauge fixtures. The 50 mm length offers a stable support surface for clamping and measurement while remaining easy to handle and store. Robust construction minimises the need for frequent replacement and supports sustained inspection cycles in production environments, contributing to lower total cost of ownership through longer in‑service life. Practical integration into inspection and fixture workflows The test pin is intended for end‑measure and alignment tasks within gauge blocks, fixtures and dedicated test rigs. Its consistent diameter and straightness make it suitable as a master datum for setting up jigs or for verifying bore sizes when used in combination with other reference gauges. Traceability is supported through the article identifiers and the clear specification of tolerance and dimensions, enabling integration into quality documentation and inspection plans. For routine quality control, the pin functions as a dependable reference that helps standardise measurement procedures across shifts and locations. Contact Metav Werkzeuge to discuss how the M323.506 gauge pin from Metav IndustryLine can be integrated into inspection routines or to request delivery from our Emmerich location. Technical data Article number: M323.506 GTIN: 4061905057250 Label: Prüfstift, einzeln, 5,06mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 5.06 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.011 kg Special features Material: Special steel Workshop version Application: end measurements FAQ What level of accuracy can be expected from this gauge pin? The M323.506 gauge pin from Metav IndustryLine is manufactured to a ±0.001 mm tolerance on the 5.06 mm diameter, providing high repeatability for end‑measure verification. Is the pin suitable for use in fixture alignment and gauge blocks? Yes, the 50 mm length and precise diameter make the pin suitable for fixture set‑up, alignment tasks and use as a reference in gauge block stacks or test rigs. What material is used and how does that affect durability? The pin is made from special steel, chosen for wear resistance and mechanical stability in workshop environments, which supports repeated seating without rapid degradation. Can this test pin be used in hardened or abrasive environments? The design is optimised for workshop use; for highly abrasive or specialised high‑temperature applications, material selection should be reviewed against the process conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.07mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm repeatability, a compact Ø 5.07 mm diameter and a practical 50 mm length to ensure reliable end‑measure checks and fixture alignment. Order the gauge pin directly via Metav Werkzeuge or ask the consultants for application advice. Gauge Pin M323.507 — single inspection pin, Ø 5.07 mm, ±0.001 mm, length 50 mm (Metav IndustryLine) The Gauge Pin M323.507 is a workshop‑grade inspection pin designed for precise end‑measure verification and fixture alignment in metalworking and quality control operations. Workshop-grade precision pin Diameter Ø 5.07 mm ±0.001 mm Length 50 mm for in-depth checks Precise, repeatable checks for critical tolerances For tight tolerances and repeatable inspection routines the M323.507 offers an exceptional ±0.001 mm tolerance (equivalent to 1 µm) that supports high‑accuracy go/no‑go and end‑measure tasks. This level of precision minimises measurement uncertainty and reduces the risk of rework by providing a stable reference for pass/fail decisions. Using a dedicated inspection pin instead of makeshift gauges speeds up throughput and creates consistent results across inspection cycles, which is a tangible efficiency gain for production and QA teams. Robust construction suited to workshop use Built as a workshop‑grade tool from special steel, the pin combines dimensional stability with handling convenience. The 50 mm working length is long enough for many fixture and bore checks while remaining compact for easy positioning and storage. The lightweight 0.011 kg construction permits quick manual handling during repeated checks without compromising on rigidity. The simple, single‑piece design reduces sources of error and makes the pin suitable for routine inspection loops and alignment tasks in jigs and fixtures. Practical integration into inspection workflows Integration into inspection routines is straightforward: the pin serves as a reliable reference for end‑measure checks, alignment of mating parts and verification of drilled or bored holes. With a clearly defined Ø 5.07 mm diameter and traceable identifiers, the pin fits inspection lists and batch documentation. Its workshop specification supports frequent use in repair shops, toolrooms and production lines where durable, precise measuring aids are required. Relying on standardised gauge pins helps streamline documentation and supports process reproducibility across shifts. For workshop teams requiring sub‑micrometre repeatability, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the Metav IndustryLine gauge pin and procurement options. Technical data SKU: M323.507 GTIN: 4061905057267 Product: Gauge pin, single, 5.07 mm, ±0.001 mm, length 50 mm Brand: Metav IndustryLine Facts Diameter: 5.07 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.011 kg Special features Material: special steel Workshop‑grade execution Suitable for end‑measure checks and fixture alignment FAQ What tolerance does this gauge pin provide? The Metav IndustryLine gauge pin M323.507 provides a measuring tolerance of ±0.001 mm, suitable for high‑precision inspection tasks. Which material is the pin made from? This inspection pin is manufactured from special steel, specified for workshop durability and dimensional stability. For which applications is the pin recommended? The pin is intended for end‑measure verification, fixture alignment and go/no‑go checks in inspection and assembly processes. What are the exact dimensions of the pin? The pin has a diameter of 5.07 mm, a length of 50 mm and a mass of approximately 0.011 kg. Is the product traceable for inventory and documentation? Yes, the gauge pin is identifiable by SKU M323.507 and GTIN 4061905057267 for traceability in procurement and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.08mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the tight manufacturing tolerance and robust workshop design for repeatable go/no‑go checks; the 5.08 mm diameter with ±0.001 mm accuracy and 50 mm length ensure reliable reference measurements. Order via Metav Werkzeuge or contact our consultants for assistance with application matching. Gauge pin M323.508 — test pin Ø 5.08 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.508 is a single, workshop‑grade test pin designed for precise limit and reference measurements in inspection and assembly tasks Precision tolerance ±0.001 mm Diameter 5.08 mm ground to size Workshop‑grade special steel, 50 mm length Accurate reference for high‑confidence inspection The pin serves as a repeatable, hardened reference for plug‑gauge and clearance checks, offering a diameter of 5.08 mm with a verified ±0.001 mm tolerance. Such accuracy reduces measurement ambiguity in inspection routines and supports interchangeability checks during assembly. Ground and finished to size, the element functions as a straightforward verification tool for bore sizes and feature conformity, helping to reduce inspection time through a single, reliable measurement step. Robust construction built for the workshop Manufactured from special steel in a workshop‑grade execution, the test pin withstands typical handling and repeated seating in fixtures. With a length of 50 mm, it is long enough to stabilise insertion into bores while remaining compact for handheld checks. Supplied individually and protected in a transport case, the component arrives ready for immediate use and storage with reduced risk of surface damage. The robust material choice contributes to a consistent surface finish and wear resistance over many cycles. Practical integration into quality processes Designed for simple incorporation into inspection benches or portable kits, the component supports quick pass/fail assessments and correlates well with gauge blocks and master pins in a calibration chain. Traceability is facilitated via the product SKU M323.508 and GTIN for inventory control. The compact mass and clear specification simplify procurement and record keeping in quality documentation, while the workshop configuration ensures the pin is suited to day‑to‑day production environments rather than delicate lab conditions. Contact Metav Werkzeuge for tailored advice on integrating the M323.508 into inspection routines or for assistance in selecting matching gauge sets and storage solutions Technical Data Article number: M323.508 GTIN: 4061905058028 Label: Prüfstift, einzeln, 5,08mm, +/- 0.001 mm Länge 50 mm SKU: M323.508 Facts Diameter: 5.08 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.011 kg Special features Material: special steel Workshop execution Supplied individually in a transport case Suitable for plug‑gauge and reference checks FAQ What diameter and tolerance does this gauge pin have? The gauge pin M323.508 is manufactured to a diameter of 5.08 mm with a tolerance of ±0.001 mm, making it suitable for precise limit and reference measurements. Is the test pin suitable for daily workshop use? Yes, the M323.508 is a workshop‑grade pin made from special steel and supplied in a protective transport case to withstand routine handling. Can this pin be used as a reference for bore inspections? The pin functions well as a reference for bore and clearance checks; its ground diameter and tight tolerance enable simple go/no‑go assessments and quick verification. How should the pin be stored to maintain accuracy? Keep the pin clean and dry in its transport case when not in use; this reduces surface contamination and preserves the finished diameter for reliable measurements. Does the product come with traceability data for inventory? The item is identifiable by SKU M323.508 and GTIN 4061905058028, which supports inventory control and traceability in quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.09mm Gauge Pin, ±0.001 mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a workshop‑grade test pin that combines ±0.001 mm repeatability with a 5.09 mm nominal diameter and a 50 mm reach for reliable end‑measure checks. The robust special steel construction and protective transport case ensure repeatable inspection results and safe storage — order the part directly via Metav Werkzeuge or consult our specialists for specification support. M323.509 Test Pin (5.09 mm), ±0.001 mm, 50 mm – Metav IndustryLine The M323.509 Test Pin is a workshop‑grade gauging pin designed for high‑precision end‑measure verification and plug‑gauge replacement in production and inspection environments. Workshop‑grade special steel construction Diameter 5.09 mm with ±0.001 mm accuracy 50 mm overall length for extended reach Supplied in a protective transport case Consistent micrometre‑level repeatability for inspection The M323.509 is engineered to deliver ±0.001 mm repeatability, making it suitable where tight tolerances determine part acceptance. Such high resolution reduces false rejects and supports statistical process control by providing a stable reference for comparative measurements. Using a fixed‑diameter gauging element simplifies go/no‑go assessments and minimises measurement variability from operator handling, while the nominal 5.09 mm size matches common end‑measure requirements in small‑component inspection. Durable, workshop‑ready construction that keeps measuring reliable Built as a workshop‑grade tool from special steel, the pin resists everyday wear in inspection benches and toolrooms. The 50 mm overall length offers additional reach for recessed bores and stepped features while keeping handling straightforward. Supplied in a protective transport case, the component remains safe during storage and transit, supporting traceable inventory and lowering the risk of damage that would compromise dimensional integrity. Designed for efficient measurement workflows and stock management As a single replacement pin for gauging sets, this test pin streamlines maintenance of in‑line inspection equipment and keeps calibration cycles short. The compact weight (0.011 kg) and clear identification simplify stocking and handling in busy quality departments. The combination of precise geometry and straightforward form factor makes this gauging element a practical choice for both small series production and tool‑room tasks where repeatability and quick interchangeability are required. For specification advice, spare‑part supply or to include the M323.509 in an inspection kit, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored support and prompt delivery. Technical data SKU: M323.509 GTIN: 4061905058035 Label: Prüfstift, einzeln, 5,09mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 5.09 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.011 kg Special features Material: special steel Workshop‑grade execution Supplied in protective transport case Single test pin for gauging and end‑measure checks FAQ What tolerances does this test pin achieve? The test pin achieves a dimensional tolerance of ±0.001 mm, which makes the M323.509 suitable for high‑precision comparison and plug‑gauge applications. Can the pin be used as a direct replacement in existing gauging sets? Yes. The single‑piece design and standard diameter allow the pin to serve as a direct replacement element in many gauging fixtures and inspection assemblies. What material is the pin made from and how does that affect wear? The component is made from special steel and provided in a workshop‑grade finish to withstand routine handling and preserve geometric stability during regular inspection use. Is the part traceable for inventory management? The item is supplied with a clear SKU (M323.509) and GTIN for straightforward identification and stock control within inspection departments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.11mm Test Probe ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
Take advantage of high-precision tolerance (±0.001 mm) together with a compact 5.11 mm diameter and a robust 50 mm length for dependable fit checks and end‑measurement tasks. Order the part directly via Metav Werkzeuge or contact the consultants for specification support. M323.511 gauge pin — 5.11 mm, ±0.001 mm precision (Metav IndustryLine) The M323.511 gauge pin is a single, workshop‑grade precision pin designed for tight fit verification and end‑measurements in inspection and assembly environments. High-precision tolerance ±0.001 mm Diameter 5.11 mm for tight fits Length 50 mm for versatile checks Workshop-grade special steel construction Reliable accuracy for critical fit checks A tolerance of ±0.001 mm positions this pin in the category of ultra‑fine inspection tools where dimensional certainty is essential. Such precision minimises measurement scatter during repeated checks and supports consistent go/no‑go assessments for mating parts. The tight specification also reduces rework by clarifying whether a bore or shaft meets its intended limits; when a numerical tolerance is this small, the measurement outcome becomes a reliable basis for production decisions. The construction and finish are optimised to preserve the diameter 5.11 mm under typical workshop handling. Durable design that suits everyday workshop use Manufactured from special steel, the component combines dimensional stability with wear resistance appropriate for repetitive contact checks. The 50 mm length offers a practical balance between reach and manoeuvrability, making the item simple to handle while retaining stiffness at the contact face. The workshop version is engineered for frequent use: surfaces are finished for low friction and the pin’s geometry supports repeatable seating in bores and mating features. This results in fewer measurement deviations caused by edge chatter or misalignment. Seamless integration into inspection processes As a single plug‑style pin for end‑measurements and fit verification, this item integrates cleanly into established quality control routines. It serves as a dependable reference for checking tolerances during in‑process inspection, final inspection and assembly validation. Traceable identifiers such as the GTIN aid inventory and document control in the lab or shop floor, while the compact form factor reduces handling time during batch sampling. For precision tasks that demand clear, numeric results, the pin provides an objective measurement vector that supports rational decision‑making in production workflows. Contact Metav Werkzeuge for tailored advice on integrating the M323.511 gauge pin into inspection routines and to request availability details via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.511 GTIN: 4061905058059 Material: Spezial‑Stahl Accuracy: ±0.001 mm Diameter: 5.11 mm Length: 50 mm Weight: 0.011 kg Special version: Workshop execution Facts Diameter (mm): 5.11 Length (mm): 50 Tolerance (mm): ±0.001 Weight (kg): 0.011 ECLASS: 21170231 Special features Single gauge pin for end‑measurements Workshop‑grade construction GTIN assigned for traceability Compact format for quick handling Suitable for precise fit and bore checks FAQ What is the primary application of this gauge pin? The M323.511 gauge pin is intended for precise end‑measurements and fit verification of bores and mating features in inspection and assembly tasks. What tolerance and resolution does the pin offer? The pin is manufactured to an accuracy of ±0.001 mm, providing the tight dimensional control required for fine fit checks. Which material is used for the pin? The component is made from special steel, chosen for dimensional stability and resistance to wear in workshop use. Is the item suitable for repeated workshop checks? Yes. The workshop specification and robust finish support frequent handling and repetitive contact checks without rapid degradation of the contact surface. How is the product identified for inventory and traceability? Identification is supported by the article number M323.511 and the GTIN 4061905058059, facilitating stock control and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com