Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
7.97mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine tolerance, robust special steel construction and compact 50 mm length for reliable in‑fixture measurement. Benefit from a workshop‑grade gauge pin that supports precise end‑dimension checks and consistent repeatability — order the product directly via Metav Werkzeuge or consult the technical team for application advice. Test pin M323.797 — Gauge pin (7.97 mm) with ±0.001 mm accuracy Test pin M323.797 is a precision gauge pin designed for end‑dimension verification and fixture alignment in inspection and jigs. Workshop version for robust shop use Diameter 7.97 mm with ±0.001 mm accuracy Length 50 mm for fixture and gage use Precision where tolerances decide the outcome The gauge pin offers a diameter of 7.97 mm with a guaranteed ±0.001 mm deviation, making it suitable for high‑precision measurement tasks and fine tolerance checks. Its compact 50 mm length and low mass ensure minimal influence on delicate fixtures while the special steel construction maintains dimensional stability under repeated handling. This combination reduces rework and improves process reliability, particularly where parts are inspected against tight end‑dimension criteria. Robust design for everyday workshop use Built as a workshop version, the pin withstands frequent insertion and removal in gauges and alignment tools without sacrificing accuracy. The hardened steel body provides wear resistance and consistent contact geometry, which translates into repeatable measurements over many cycles. Where repeatability is critical, the stable material properties and precise machining minimise measurement drift and support predictable quality control outcomes. Easy integration into inspection routines As a standard gauge pin from Metav IndustryLine, this component integrates seamlessly into jigs, plug gauges and test assemblies. The compact form factor and exact diameter enable quick substitution in inspection fixtures and permit straightforward comparative checks during batch sampling. Traceable identification (SKU M323.797, GTIN 4061905062735) supports inventory control and documentation within metrology procedures, contributing to clear audit trails and consistent part verification. Contact Metav Werkzeuge to match this Metav IndustryLine gauge pin to specific fixtures or measurement routines and secure the right specification for production control. Technical Data Article number: M323.797 GTIN: 4061905062735 Brand: Metav IndustryLine Facts Diameter: 7.97 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.024 kg Special features Material: Special steel Version: Workshop execution Accuracy class: ±0.001 mm Category: Gauge pin / test pin eCl@ss: 21170231 FAQ What is the declared tolerance of this gauge pin? The declared tolerance of the Test pin M323.797 is ±0.001 mm, specified for precise end‑dimension and fixture checks. Which materials is the pin suitable for when used as a reference in gauges? The pin is made from special steel and is intended as a dimensional reference in gauges rather than for direct machining of workpiece materials. Can this pin be used in plug gauge kits and inspection jigs? Yes, the Metav IndustryLine gauge pin (SKU M323.797) is designed for integration into plug gauges, jigs and test assemblies for repeatable verification. How does the short length affect measurement stability? The 50 mm length minimises lever effects in compact fixtures and reduces handling influence, improving repeatability in end‑dimension checks. Is traceability provided for this component? The product identification (M323.797, GTIN 4061905062735) supports traceability within inspection documentation and inventory systems Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.98mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, sub‑micron tolerance and compact length — the gauge pin delivers 7.98 mm diameter with ±0.001 mm accuracy in a 50 mm length for reliable end‑measurement and inspection tasks. Order directly via Metav Werkzeuge or consult our specialists for specification support. Gauge pin M323.798 — single test pin, 7.98 mm Ø, ±0.001 mm (Metav IndustryLine) A gauge pin M323.798 designed for precision end‑measurements and quick diameter verification in workshop and inspection environments. Diameter 7.98 mm with ±0.001 mm tolerance Length 50 mm workshop version Manufactured from special steel Supplied individually for end‑gauge use Precision that secures measurement certainty The instrument is engineered to provide a consistent reference for dimensional checks. With a nominal diameter of 7.98 mm and a tight ±0.001 mm tolerance, the component minimises uncertainty during pass/fail checks and repeat inspections. This level of accuracy supports interchangeability of mating parts, reduces rework and shortens inspection cycles by giving planners and operators a verifiable reference that is easy to integrate into routine quality control procedures. Robust workshop design for reliable handling Manufactured in special steel and delivered in a workshop configuration, the measuring pin withstands everyday handling and small impacts typical in production environments. The 50 mm length offers a compact profile that is easy to position in fixturing and fixtures while keeping the contact faces accessible for measurement. The single‑piece supply avoids confusion in mixed sets and simplifies storage and identification on the shop floor. Streamlined inspection workflows with straightforward use As a single test pin intended for end‑measure duties, the product is suited to quick go/no‑go checks, stack‑up validation and as a reference plug within jigs and gauges. The simple geometry reduces measurement setup time and supports rapid throughput in routine tasks. Where repeatability is required, the fixed diameter and defined tolerance make this pin a dependable element in inspection plans and first article verifications. Typical applications and compatibility This gauge pin is ideal for workshop inspection, small‑series production checks and toolroom tasks that demand a clearly defined reference diameter. It serves as an end‑gauge for bore checks, a reference for plug gauge assemblies and a measuring aid when assessing finished part dimensions. The compact form factor and workshop execution make it a practical choice for quality engineers, maintenance teams and precision fitters requiring a robust, high‑accuracy measuring element. Contact Metav Werkzeuge today for tailored supply options of Metav IndustryLine gauge pins with ±0.001 mm accuracy and expert advice on integrating them into inspection routines Technical data Article number: M323.798 GTIN: 4061905063107 Brand: Metav IndustryLine Material: Special steel Type: Single gauge pin Facts Diameter: 7.98 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.024 kg eCl@ss: 21170231 Special features Workshop execution End‑gauge / end‑measure application Individually supplied Suitable as reference plug in gauges FAQ What tolerance does this gauge pin offer and why is it important? The gauge pin M323.798 provides a tolerance of ±0.001 mm, which ensures repeatable dimensional references for pass/fail inspections and reduces uncertainty in assembly checks. Which materials is the gauge pin made from and how does that affect durability? The M323.798 is manufactured from special steel; this material choice gives the pin wear resistance and dimensional stability suited to workshop handling and frequent use. Can this pin be used in fixture and plug gauge assemblies? Yes — the single test pin format of the Metav IndustryLine gauge pin is suitable for use as a reference plug or as a component within fixture and plug gauge arrangements. For which inspection tasks is this pin best suited? The pin is optimised for end‑measurement tasks, quick bore verifications and toolroom dimensional checks where a compact, high‑precision reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.99mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine accuracy, robust workshop design and compact form factor for reliable end‑measurements and gauge setting; order or discuss requirements with Metav Werkzeuge for tailored advice. Test pin M323.799 — Precision test pin, 7.99 mm, ±0.001 mm (Metav IndustryLine) A Test pin M323.799 designed for high‑precision end‑measurements and gauge setups in workshop and inspection environments. Workshop version for robust daily use Diameter 7.99 mm with ±0.001 mm accuracy 50 mm overall length for compact setups Supplied in protective transport box Exceptional accuracy for repeatable inspections The core advantage of this test pin is its tolerance of ±0.001 mm, which supports extremely tight inspection criteria and repeatable gauge adjustments. Such a fine tolerance minimises measurement uncertainty when validating end dimensions or comparing mating parts, turning what would otherwise be a time‑consuming trial into a controlled verification step. The 7.99 mm diameter is suitable for precision fits and reference checks in jigs and fixtures where dimensional fidelity matters. Built for workshop use and straightforward handling Built as a workshop execution item, the pin combines durability with ergonomic handling for routine use on the shop floor. The 50 mm length offers a compact footprint that is easy to position in confined fixtures and reduces the risk of bending or wobble during transfer. Supplied in a protective transport box, the component arrives ready for storage and safe handling between measurement cycles, helping maintain its calibrated condition and surface integrity. Material choice and application scope Constructed from special steel, the pin provides a balance of wear resistance and dimensional stability appropriate for repeated contact with inspection gauges and parts. The material choice supports use in general metrology tasks and in workshop contexts where robustness against knocks and abrasion is required. Its specification and finish make it particularly suitable for use as a reference or master pin in testing rigs and end‑dimension checks where both repeatability and service life are priorities. Practical benefits for quality assurance workflows Integrating this precision pin into quality assurance processes reduces rework by providing a stable reference for end measurements and quick pass/fail checks. The compact design simplifies storage and fixturing, while the tight tolerance supports objective, quantifiable inspection criteria that can be documented within standard QA procedures. This translates into measurable time savings and fewer ambiguous measurement results during daily production checks. For application advice or to secure this Metav IndustryLine test pin, contact Metav Werkzeuge for tailored recommendations and procurement support Technical data Article number: M323.799 GTIN: 4061905063114 Brand: Metav IndustryLine Type: Test pin (single) Key measurements Diameter: 7.99 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.024 kg Features & materials Material: Special steel Workshop execution Supplied in a protective transport box FAQ What level of precision does the test pin offer? The Metav IndustryLine test pin M323.799 provides a tolerance of ±0.001 mm, suitable for high‑precision end‑measurements and gauge setting. Is the pin suitable for everyday workshop use? Yes, the workshop execution and special steel construction make the test pin robust enough for daily handling and routine inspection tasks. Can the pin be used as a master reference in fixtures? The combination of a 7.99 mm diameter and ±0.001 mm tolerance makes the pin appropriate as a master reference for small‑format fixtures and gauge setups. How is the component delivered to protect accuracy? The test pin is supplied in a protective transport box to prevent damage during storage and transit, preserving surface condition and dimensional integrity. What contact information is available for technical queries? For technical queries and application advice, Metav Werkzeuge can be contacted; they provide product and procurement guidance for Metav IndustryLine items. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.9mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-hardened construction, ultra-fine tolerance and compact length for repeatable end‑size checks; order the gauge pin directly via Metav Werkzeuge or consult Metav's specialists for application advice. Gauge pin M323.790 — 7.90 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A gauge pin M323.790 designed as a single test pin for precise end‑measurements and plug gauge control in workshop metrology. Workshop version for robust daily use Diameter 7.90 mm with ±0.001 mm accuracy 50 mm hardened special‑steel construction Supplied in protective case for transport Precision that removes doubt from routine checks This test pin delivers an exceptionally fine tolerance of ±0.001 mm, providing measurement certainty when assessing end‑sizes or verifying bore limits. In the Micro class of small‑range gauges (max. 10–100 mm), the compact diameter and short overall length reduce bending and handling error, so results remain reproducible even in repetitive inspection cycles. The tight tolerance transforms individual measurements into dependable process data, supporting efficient quality control and reducing rework rates. Built for the workshop — durable, compact and easy to handle Constructed from special steel and finished for workshop use, the pin combines wear resistance with a manageable mass of 0.024 kg, keeping handling comfortable during batch inspections. The 50 mm length strikes a balance between reach and stiffness, making the pin suitable for plug gauge tasks and small component checks without compromising straightness. Delivered in a protective case, the component arrives ready for transport and safe storage, helping to maintain surface integrity and dimensional stability between uses. Practical integration into inspection routines The small, single‑piece design suits incorporation into gauge sets, fixture checks and end‑measurement procedures on the shop floor. The 7.90 mm diameter and fine tolerance are ideal for end‑mass checks and for confirming mating fits where tight clearances matter. As part of Metav IndustryLine, this gauge pin benefits from central European stock management and quality filtering in Emmerich, which supports consistent supply and reliable replacement logistics for production environments. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine gauge pin M323.790 into inspection workflows and to secure precise workshop‑grade test pins with protective transport packaging Technical Data Article number: M323.790 GTIN: 4061905062100 Manufacturer: Metav IndustryLine Facts Diameter: 7.90 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.024 kg Special features Material: special steel Workshop execution for daily use Supplied single in a protective case for transport Category: gauge pin (Messstifte) FAQ What level of accuracy can be expected from this gauge pin? The Metav IndustryLine gauge pin M323.790 is specified to ±0.001 mm, making it suitable for high‑precision end‑size checks and tight tolerance verifications. Is the pin suitable for use in a gauge set or as a standalone test pin? Yes, the single‑piece design of the M323.790 allows use both individually and as part of gauge sets for plug gauge and fit testing applications. What material is used and how does that affect wear? Manufactured from special steel, the gauge pin offers improved wear resistance for workshop environments while maintaining dimensional stability over repeated use. Does the product include protective storage for transport? The M323.790 is supplied in a protective case to preserve surface quality during transport and storage, helping to maintain measurement reliability. Which applications are best suited to this 7.90 mm pin? The 7.90 mm diameter and fine tolerance make this pin ideal for end‑mass measurements, bore acceptances and any checks where small‑range dimensional fidelity is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7mm Gauge Pin, Single, ±0.001mm Accuracy, Length 50mm, Workshop Finish - Metav IndustryLine
Take advantage of the combination of shop‑ready robustness, ±0.001 mm dimensional accuracy and a compact 50 mm length for repeatable end‑dimension checks. Order the gauge pin directly via Metav Werkzeuge or consult the in‑house specialists for application advice. Gauge pin M323.700 – single, 7.00 mm, ±0.001 mm tolerance (50 mm length) The gauge pin, single, 7.00 mm offers a precision test pin for end‑dimension checks and go/no‑go verification in workshop and inspection environments. ±0.001 mm tolerance for high precision 7.00 mm diameter for tight‑fit checks 50 mm length for compact end‑dimension control Workshop design with transport case included Precision that shortens inspection time and reduces rework The compact pin delivers ±0.001 mm tolerance on a 7.00 mm diameter, enabling fast, decisive assessments of mating bores and seats. Such fine accuracy transforms manual checks into reliable go/no‑go verifications and supports consistent sampling in production. By compressing high resolution into a short 50 mm length, the component reduces the need for adjustment or auxiliary fixturing, which in turn lowers inspection cycle time and limits the risk of scrap due to undetected dimensional errors. Built for the shop floor: durable handling and organised storage Specified as a workshop design, the pin is manufactured from special steel chosen for wear resistance under repetitive use. The carefully proportioned mass and a total length of 50 mm ensure stable handling during routine checks, while the supplied transport case protects the gauge pin during storage and movement between workstations. These attributes keep downtime to a minimum and preserve measurement integrity across repeated use, supporting steady throughput on the production line. Practical fitment: where the pin adds value in measurement workflows Designed for end‑dimension checks and alignment tasks, this single gauge pin suits quality control, toolmaking and small‑batch production verification. The article M323.700 is ideal when space is limited but measurement certainty is required; its tight tolerance helps to verify press fits, guide bores and locating features without elaborate setups. Integration into inspection benches or quick‑change jigs is straightforward, enabling the pin to become a repeatable reference point in everyday measurement routines. For dependable end‑dimension verification with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for ordering and technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.700 GTIN: 4061905059391 Label: Gauge pin, single, 7.00 mm, ±0.001 mm, length 50 mm Category: Gauge pins Facts Diameter: 7.00 mm Length: 50 mm Tolerance / accuracy: ±0.001 mm Weight: 0.019 kg eCl@ss: 21170231 Special features Workshop design Material: special steel Supplied in transport case Intended use: end‑dimension checks FAQ What measurement tolerance does the gauge pin offer? The gauge pin offers a tolerance of ±0.001 mm as specified for the single 7.00 mm test pin. Is the pin suitable for repeated shop‑floor use? Yes, the workshop design and special steel construction make the gauge pin suitable for repeated inspections and everyday handling. For which checks is this pin intended? The pin is intended for end‑dimension checks, go/no‑go verifications and alignment tasks in quality control and toolmaking. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7–8 mm Probe Holder For 0.1–1 mm Pins, Anodised Green Aluminium - Metav IndustryLine
The compact anodised aluminium construction and compatibility with measuring pins from 0.1–1.0 mm provide a durable, easy-to-integrate solution for fixture and probe applications; the green one-sided mount aids rapid visual identification and repeatable positioning. Order the measuring-pin holder directly via Metav Werkzeuge or ask our consultants if needed. Measuring-pin holder GO, 7–8 mm — anodised aluminium, green one-sided mount (Metav IndustryLine) Measuring-pin holder GO, 7–8 mm is a compact anodised aluminium holder designed to accept measuring pins from 0.1 to 1.0 mm, offering a robust one-sided green mount for rapid fixture integration. Anodised aluminium construction Fits measuring pins 0.1–1.0 mm Green one-sided mounting for quick locating Compact 70 mm length for tight setups Precision and material benefits for reliable fixtures The holder is made from anodised aluminium, which combines lightweight construction with corrosion resistance to maintain dimensional stability in workshop environments. Its acceptance range for measuring pins (0.1–1.0 mm) makes it suitable for a broad set of metrology tasks where small-diameter styli or pins are used. The aluminium body minimises added mass to a fixture or probe arm, helping to preserve measurement repeatability and reducing strain on delicate setups. Faster set-up and clear identification on the shop floor With a green one-sided mount and compact footprint, the component simplifies visual sorting and fixture layout, supporting quick changeover processes in quality-control benches and inspection rigs. The single-sided configuration is particularly useful where access is limited on one flank of a clamping plate or probe assembly; the green colour speeds identification in multi-fixture environments and reduces the time spent locating the correct holder. Robust finish and workshop suitability The anodised surface provides a wear-resistant finish that resists scuffs and surface corrosion during routine handling, extending service life in industrial settings. The holder’s 70 mm length and 14 mm width offer a balance between reach and rigidity, allowing it to be mounted in confined spaces without compromising stability. As part of Metav IndustryLine, the component aligns with a practical assortment of metrology accessories intended for dependable, everyday use. For specification guidance or to order this anodised aluminium measuring-pin holder from Metav IndustryLine, contact Metav Werkzeuge for expert advice and reliable delivery. Technical data Article number: M318.566.8 Manufacturer: Metav IndustryLine SKU: M318.566.8 Product name: Measuring-pin holder GO, 7–8 mm Facts Length: 70 mm Width: 14 mm Accepts measuring pins: 0.1–1.0 mm Special features Material: aluminium, anodised Colour: green Mounting: one-sided Intended use: for securing measuring pins / styli in fixtures and probe assemblies FAQ What pin diameters fit this holder? The holder accepts measuring pins with diameters from 0.1 to 1.0 mm, making the Measuring-pin holder GO, 7–8 mm suitable for fine styli and small probe tips. Is the holder corrosion resistant? Yes, the anodised aluminium finish provides a wear-resistant and corrosion-protective surface for routine workshop use. Can the holder be used in tight fixture layouts? The compact 70 mm length and 14 mm width allow the holder to be mounted in confined spaces while maintaining adequate rigidity for stable measurements. What does the green mount indicate? The green one-sided mount facilitates rapid visual identification and organised fixture layouts; it is designed to simplify selection and reduce setup time. Who supplies this measuring-pin holder? The Measuring-pin holder GO, 7–8 mm is supplied under Metav IndustryLine; see the manufacturer details below for contact and ordering information. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8,01-9 mm Gauge Pin Set 100 Pieces, 0.01 mm Steps, Special Steel, Case - Metav IndustryLine
Take advantage of a combination of fine graduations and verified mechanical accuracy to speed up inspection work while reducing rework. The high-resolution increments and robust special-steel construction support repeatable results in gauge and tool setting; order directly from Metav Werkzeuge or consult the Metav team for technical advice. Gauge Pin Set M318.558 — precision gauge pins with 0.01 mm increments A gauge pin set designed for precise hole checking and gauge setting in inspection and toolmaking applications *High-resolution increments: 0.01 mm steps *Diameter range 8.01–9.00 mm for close fits *Accuracy down to 0.002 mm for reliable checks *Special steel construction for long service life Precision where consistent fits are required The set delivers consistent, repeatable sizing across the diameter range 8.01–9.00 mm, with fine 0.01 mm gradation that helps pinpoint tolerance deviations during first-article inspection or in-process checks. The declared accuracy of 0.002 mm positions the pins for tasks where small deviations influence assembly or running clearance; this numerical precision reduces the need for multiple verification steps and supports tighter process control workflows. The modular nature of the pins makes them suited for incremental measurement tasks and fine adjustment of gauges and fixtures. Robust construction to withstand frequent handling Manufactured from special steel, the pins resist wear and maintain dimensional stability during repeated insertion and withdrawal. The material choice and machining quality together extend tool life and reduce downtime for replacements, which translates into lower lifecycle costs and fewer interruptions on the shop floor. Surface finish and hardness are optimised for tight fits, so the set remains a stable reference for comparative gauging and for establishing a baseline in routine quality checks. Designed for integration in measurement routines Engineered as a precision gauge tool, the set complements bench and portable inspection equipment and is easy to incorporate into standard operating procedures for acceptance or maintenance tests. Marked dimensions and consistent increments make tracking and documentation straightforward in quality reports, while the compact layout supports orderly storage and quick retrieval during setup. The product code M318.558 is suitable for procurement records and inventory systems to streamline reordering and traceability within production environments. For dependable precision from the Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored procurement and technical clarification — Metav Werkzeuge can advise on integration into existing inspection routines Technical data SKU: M318.558 GTIN: 4054469129419 ECLASS: 21170231 Customs tariff: 90173000 Facts Diameter range: 8.01–9.00 mm Increment/step: 0.01 mm Declared accuracy: 0.002 mm Pin length: 50 mm Weight: 3.8 kg Special features Material: Special steel Category: Gauge pins / plug gauges Set configuration: supplied as a matched range Intended use: inspection, gauge setting, dimensional checking FAQ What diameter range is covered by the set? The gauge pin set covers diameters from 8.01 to 9.00 mm and is intended for close-fit checking and gauge setting with fine gradations. What is the resolution of the increments? The pins are produced in 0.01 mm steps, providing high-resolution increments for incremental measurement and adjustment. What accuracy can be expected during checks? A declared mechanical accuracy of 0.002 mm supports reliable acceptance checks and tight-tolerance verification. What material are the pins made from? The pins are machined from special steel to provide wear resistance and dimensional stability under frequent use. Is a calibration certificate included with the set? The product data does not specify a factory calibration certificate; traceable calibration is not listed as supplied with this item Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8,01-9mm Messstift-Sätze, Werkstatt-Ausführung, ± 0,004 mm
- aus Spezial-Stahl Werkstatt-Ausführung, Länge 50 mm Genauigkeit < ± 0,004 mm im Behältnis/KastenTechnische Daten- Messbereich: 8,01-9mm- Stufung: 0,01mm- Anzahl/Satz: 100
8-9mm Go/No-Go Test Pin Holder Double-Sided Green/Red - Metav IndustryLine
Take advantage of the clear GO/NO-GO distinction and anodised aluminium construction to speed up inspection cycles while keeping fixture set-ups stable; the holder accepts measuring pins 8–9 mm and avoids swaps with its green/red double-sided coding. Order the item directly via Metav Werkzeuge or consult the advisors for application support. Messstift-Halter, GO-NOGO 8 - 9 mm, double-sided (anodised aluminium) — Metav IndustryLine The Messstift-Halter, GO-NOGO, 8 - 9 mm double-sided is a compact holder for measuring pins, designed for quick pass/fail checks and visual identification on inspection benches and in production lines. Anodised aluminium construction for durability For measuring pins 8–9 mm Double-sided GO/NO-GO in green and red Faster pass/fail decisions for routine inspection The holder enables immediate visual assessment through its double-sided GO/NO-GO design, which is particularly beneficial where high throughput is required. The contrast of green and red faces reduces interpretation time during sampling and ensures operators maintain focus on cycle time and yield. By combining a compact profile with distinct colour coding, the component supports repeatable set-up procedures and fewer handling errors, which is valuable on busy inspection benches and in small-series production. Robust, lightweight construction suited to workshop use Manufactured from anodised aluminium, the device balances durability with low weight, making it convenient to integrate into trolleys, gauge blocks or fixture plates without adding unnecessary bulk. The corrosion-resistant finish preserves dimensional clarity and resists surface wear from repeated insertion of measuring pins, contributing to longer service life and fewer replacements. The sturdy design also maintains alignment between the holder and the inserted pins, supporting repeatable measurements over many cycles. Compatibility and straightforward integration with gauges Engineered for measuring pins 8–9 mm, the holder accepts standard pin diameters used across many gauge systems and test rigs. Its simple geometry permits fast swapping between fixtures and ensures compatibility with common inspection tools. Where visual GO/NO-GO indication is preferred over more elaborate metrology, the holder provides a pragmatic solution that reduces complexity while keeping inspection standards traceable and transparent. Practical benefits for production and quality control Adopting this holder in a quality workflow shortens decision paths and clarifies inspection status at a glance, which supports lean-quality initiatives and reduces non-value-adding time. The combination of clear visual coding, precise fit for the intended pin range and robust construction makes it suitable for workshop floors, assembly lines and small-batch inspection stations. The compact footprint aids storage and handling without compromising functional reliability. Contact Metav Werkzeuge today for application advice or to request the Metav IndustryLine Messstift-Halter with SKU M318.568.9 for immediate integration into existing inspection routines Technical data Article number: M318.568.9 Name: Messstift-Halter, GO-NOGO, 8 - 9 mm doppelseitig, grün + rot Brand: Metav IndustryLine Colour: green - red Width: 16 mm Length: 90 mm Compatible pin diameter: 8–9 mm Material: Aluminium, anodised Function: Double-sided GO/NO-GO holder Application: For receiving measuring pins Intended use: Inspection benches and gauge sets FAQ Which pin diameters fit the holder? The holder accepts measuring pins 8–9 mm, making it suitable for standard pin gauges and test pins in that diameter range. Is the holder suitable for use on inspection benches and portable gauge sets? Yes, the compact, lightweight design and anodised aluminium construction make the holder appropriate for inspection benches, portable gauge rigs and workshop trolleys. Does the product include the measuring pins? The listing refers to the holder only; measuring pins are not included unless explicitly stated elsewhere in the product offer. How does the GO/NO-GO indication work in practice? The double-sided configuration provides a green side for pass and a red side for fail, enabling rapid visual decisions during sampling or line checks. What is the SKU for ordering or reference? Reference SKU M318.568.9 when enquiring about the Metav IndustryLine holder for measuring pins 8–9 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.01-9.00 mm Gauge Pin Set 101 Pc With Pin Holder 0.01 mm Graduation - Metav IndustryLine
Benefit from a workshop-ready combination of precision and range: a pin gauge set in special steel covering 8.01–9.00 mm with 0.01 mm steps and an advertised repeatability of ±0.004 mm, designed for reliable go/no-go and intermediate gauging tasks; order directly via Metav Werkzeuge or consult our advisors for application support. Pin gauge set M318.578 — 101-piece kit, 8.01–9.00 mm, 0.01 mm increments (Metav IndustryLine) Pin gauge set M318.578 is a compact verification kit for fine workshop and quality‑control tasks, intended to check bore diameters and pin fits in the 8.01–9.00 mm micro range. 0.01 mm graduations for fine adjustment Range 8.01–9.00 mm for micro gauging Supplied with a dedicated pin holder Manufactured from special steel for durability Precise increments for consistent inspection results The 101‑piece kit provides systematic steps across the 8.01–9.00 mm span with 0.01 mm graduations, enabling controlled, repeatable increments when checking bore sizes or mating components. The combination of fine steps and an indicated repeatability of ±0.004 mm supports conservative decision-making in inspection routines, reducing ambiguous fits and downstream rework. This measured approach to gauging is especially useful where small deviations can cause assembly issues or quality rejects. Ideal for micro applications and compact workpieces Classified in the micro range, this pin set addresses measurement tasks where compact dimensions and stiffness matter: short pins resist bending and provide stable reference points on small bores, making the kit suitable for watchmaking, small‑part production and precision fixtures. The limited diameter span concentrates on the typical workshop needs around 8–9 mm, so technicians can perform targeted checks without sorting through unnecessarily large ranges. Organised handling and practical use in the workshop The set is supplied complete with a pin holder, which streamlines selection and handling during inspection cycles and minimises contact wear on individual pins. Stored and presented as an organised kit, the components help maintain workflow speed in repetitive checks, while the special steel construction balances surface hardness with corrosion resistance for everyday workshop conditions. Clear graduations and a systematic layout also ease documentation of inspection steps within standard quality workflows. Robust choice for production and maintenance environments Built as a set for routine gauging, this kit reduces inspection variability and supports consistent quality control across batches. The compact construction and durable materials make it a low‑maintenance option for inspectors and machinists who require a trustworthy reference for go/no‑go decisions and incremental fits. Its focused range and solid build help integrate the toolset into standard shop processes without adding complexity. For precision micro gauging and reliable workshop inspection, choose the Metav IndustryLine pin gauge set and contact Metav Werkzeuge for tailored advice and ordering support. Technical data Article number: M318.578 GTIN: 4054469168326 Manufacturer: Metav IndustryLine Material: Special steel Pieces: 101 Special feature: With pin holder Facts Diameter range: 8.01–9.00 mm Graduation: 0.01 mm Quoted repeatability: ±0.004 mm Pin length: 50 mm Weight: 3.61 kg Special features Set for checking bores and pin fits Customs tariff number: 90173000 Category: Gauge pins / Gauging tools Workshop version FAQ What sizes are covered by the set? The M318.578 pin gauge set covers diameters from 8.01 to 9.00 mm in 0.01 mm steps. How many pins are included and how are they organised? The kit contains 101 pieces arranged with a dedicated pin holder to simplify selection and handling during inspection routines. What level of precision can be expected? The pin gauge set is specified with step increments of 0.01 mm and an indicated repeatability of ±0.004 mm for conservative gauging decisions. Is the material suitable for routine workshop use? Yes, the M318.578 is made from special steel designed for durability and regular shop handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.01mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Finish - Metav IndustryLine
Take advantage of the combination of sub‑micron accuracy (±0.001 mm), robust special steel construction and compact 50 mm length for dependable end‑dimension verification; order the gauge pin directly via Metav Werkzeuge or consult the product specialists for application advice Gauge pin M323.801 — single gauge pin, 8.01 mm, ±0.001 mm accuracy (Metav IndustryLine) A gauge pin M323.801 designed for precise end‑dimension checks and fixture verification in workshop metrology and quality inspection Sub‑micron tolerance ±0.001 mm accuracy Diameter precisely ground to 8.01 mm Robust special‑steel body, length 50 mm Accuracy that converts to confidence The pinned component provides ±0.001 mm tolerance, corresponding to a one‑micrometre deviation allowance, which places this measuring element in the high‑precision category for workshop inspection tools. Such fine tolerance supports reliable go/no‑go checks, plug‑gauge fits and repeatable end‑dimension verification in assembly and toolmaking applications. The ground diameter and controlled length ensure consistent seating in fixtures, minimising measurement scatter and reducing rework. Compact format for everyday workshop tasks With a compact 50 mm length and a precisely ground 8.01 mm diameter, this single gauge pin suits routine verification tasks where accessibility and handling matter. The special steel construction balances rigidity with manageable weight (0.024 kg), allowing quick insertion and removal in jigs, bores and checking fixtures. The workshop configuration supports frequent use and quick visual verification workflows without adding unnecessary bulk to the toolset. Practical fit into quality procedures The measuring element integrates easily into inspection sequences and small‑batch production checks, offering a straightforward means to validate end dimensions and repeatability. When used as part of a fixture or as a reference pin, the consistent geometry reduces setup time and supports traceable measurement practices. Supplied as a single, high‑accuracy pin from the Metav IndustryLine range, it contributes to stable quality outcomes across machining, assembly and maintenance operations. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine gauge pin and secure measurement components matched to workshop requirements Technical data Article number: M323.801 GTIN: 4061905064067 Category: Messstifte Label: Prüfstift, einzeln, 8,01mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 8.01 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.024 kg Special features Material: Special steel Version: Workshop execution Single gauge pin High‑precision ground diameter FAQ What level of accuracy does this gauge pin offer? The gauge pin M323.801 provides an accuracy of ±0.001 mm (one micrometre), suitable for high‑precision end‑dimension checks in workshop inspection and fixture applications. Can the pin be used for repeatable plug‑gauge checks? Yes, the precisely ground 8.01 mm diameter and controlled length make the pin appropriate for repeatable plug‑gauge seating and go/no‑go verification in quality routines. What material is the pin made from and why does that matter? The pin is manufactured from special steel, offering rigidity and dimensional stability under normal workshop conditions; this supports reliable seating and minimal deformation during repeated use. Is this item supplied as a set or single piece? This listing is for a single gauge pin (single unit) designated M323.801, intended for individual use in fixtures, jigs or as a reference element. How does this pin support fast quality checks on the shop floor? Its compact 50 mm length and precise diameter enable quick insertion into bores and fixtures, reducing setup time and enabling efficient, repeatable measurement routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.02mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of absolute repeatability and compact handling for reliable fit checks and faster inspection cycles; the ±0.001 mm tolerance and the 8.02 mm nominal diameter ensure traceable end‑size results. Order the gauge pins directly via Metav Werkzeuge or ask the consultants for application support. Gauge pin M323.802 — single, Ø 8.02 mm, ±0.001 mm accuracy (Metav IndustryLine) A gauge pin M323.802 engineered for precise end‑size inspection and fit verification in workshop environments, supplied as a single, workshop‑grade test pin. High-precision ±0.001 mm tolerance Solid special-steel construction Consistent 8.02 mm end dimension Workshop-grade 50 mm length Faster inspection thanks to micron-class accuracy The pin provides a ±0.001 mm (±1 µm) tolerance that removes guesswork from size verification. This high-precision specification shortens setup and measurement time by reducing rework and limiting pass/fail ambiguity in batch checks. For production environments where interchangeability and repeatable fits are critical, the micron-level control supports streamlined quality assurance and fewer downstream rejects. Robust material for dependable handling and longevity Manufactured from special steel, the pin combines dimensional stability with everyday workshop resilience. The nominal diameter of 8.02 mm and the 50 mm length form a balanced geometry that is easy to seat in bores and sockets while remaining stiff under handling. A low mass (approx. 0.024 kg) makes rapid manual indexing and fixture placement straightforward, supporting higher throughput during routine inspection tasks. Practical use in assembly and metrology workflows Designed as a single, workshop‑grade test pin, this component excels for end‑size inspection and fit testing of mating parts, gauges and fixtures. The consistent end dimension simplifies go/no‑go checks and partner‑part alignment, improving process reliability in toolrooms and production lines. Integration into inspection routines brings measurable efficiency gains and a clearer traceability chain when documenting size conformity. Contact Metav Werkzeuge for purchasing and application advice on high‑precision gauge pins from the IndustryLine — consultancy and supply from Emmerich for reliable fit checks Technical data Article number: M323.802 GTIN: 4061905064074 Manufacturer: Metav IndustryLine Description: Gauge pin, single, 8.02 mm, ±0.001 mm, length 50 mm Core data Diameter: 8.02 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.024 kg Special features Material: Special steel Workshop execution Supplied as single piece Intended for end-size inspection and fit testing FAQ What dimensional accuracy does this gauge pin offer? The gauge pin M323.802 from Metav IndustryLine is specified to ±0.001 mm, corresponding to ±1 µm, suitable for high‑precision end‑size verification. For which inspection tasks is this pin suitable? The pin is intended for end‑size inspection, fit verification and fixture alignment; the consistent 8.02 mm diameter supports go/no‑go checks and component mating tests. What material is used for the pin? This Metav IndustryLine pin is made from special steel, selected for dimensional stability and workshop durability. How is the product supplied and what is its form factor? The item is delivered as a single, workshop‑grade test pin with a 50 mm length and compact handling characteristics. Is this pin appropriate for routine workshop use? Yes; the workshop execution and robust material make it suitable for frequent handling and standard quality‑control cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.03mm Gauge Pin Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
High-precision inspection for reproducible fit checks: the single gauge pin delivers a stable reference with a diameter of 8.03 mm and a tight ±0.001 mm tolerance across its 50 mm length. The workshop‑grade special steel construction ensures durability under regular use; order directly via Metav Werkzeuge or consult our advisors for application support. Gauge pin M323.803 — single inspection pin, 8.03 mm ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.803 is a single, workshop‑grade inspection pin designed for precise end‑measurements and plug‑fit checks in production and quality assurance. Diameter 8.03 mm with ±0.001 mm tolerance 50 mm overall length for end‑measurement tasks Workshop‑grade special steel construction Supplied in protective transport case Consistent reference for repeatable fits and go/no‑go tests A solid cylindrical gauge pin with a diameter of 8.03 mm and an uncertainty of ±0.001 mm becomes a reliable master for fit verification and functional clearance testing. The tight tolerance reduces measurement scatter and supports reproducible assembly checks, which speeds up pass/fail decisions on the shop floor. Using a defined cylindrical reference simplifies tolerance interpretation for inspection technicians and reduces rework by clarifying whether a bore or mating part conforms to specification. Durable workshop design for daily production use Constructed from special steel and specified as a workshop‑grade item, the pin combines wear resistance with dimensional stability under routine handling. The choice of material provides toughness for repeated insertion and withdrawal in metal housings and fixtures, maintaining the critical diameter over many cycles. The compact 50 mm length balances accessibility to recessed features with ease of handling, making the component practical for both bench‑level checks and inline quality control applications. Practical handling, storage and traceability advantages Supplied singly and delivered in a protective transport case, the pin is easy to store and to carry between production stations while remaining protected from knocks and corrosion. The single‑piece format eliminates ambiguity in selection during inspection runs; labelled stock keeps the workflow efficient and reduces downtime caused by tool searches. For procurement and inventory control the product is identified as M323.803 (Metav IndustryLine), allowing straightforward replenishment and part tracking across production batches. Contact Metav Werkzeuge today on +49 2822 7131930 or info@metav-werkzeuge.com to discuss the M323.803 gauge pin and receive tailored application advice from our specialists Technical data Article number: M323.803 GTIN: 4061905064081 Manufacturer: Metav IndustryLine Facts Diameter: 8.03 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.024 kg Special features Material: Special steel Workshop version Supplied in transport case Category: Messstifte FAQ What tolerance does the gauge pin achieve? The M323.803 gauge pin is specified to ±0.001 mm, providing a high‑precision reference for fit and clearance measurements. What are the exact dimensions of the pin? The inspection pin measures 8.03 mm in diameter with a 50 mm overall length, suitable for end‑measurement and plug checks. Which material is used for this inspection pin? The pin is manufactured from special steel in a workshop‑grade finish to combine durability with dimensional stability. Is the pin delivered ready for transport and storage? Yes, the gauge pin is supplied singly in a protective transport case to prevent damage and ease handling between inspection stations. For which applications is this pin intended? Designed for production and quality assurance, the M323.803 is intended for plug‑fit testing, clearance verification and repeatable end‑measurements in machining and assembly environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.04mm Gauge Pin ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑tight tolerance (±0.001 mm), 8.04 mm nominal diameter and a 50 mm working length for reproducible end‑gauge checks; order the part directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.804 — 8.04 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.804 is a single precision end gauge designed for inspection, go/no‑go checking and fixture setting in workshop and fine‑mechanical environments. Precision tolerance ±0.001 mm Nominal diameter 8.04 mm 50 mm checking length Workshop‑grade special steel Consistent sub‑micron control for inspection and process reliability A gauge pin with a tolerance of ±0.001 mm provides exceptionally tight dimensional control for final inspection and reference measurements. The fine nominal size of 8.04 mm and the stated accuracy reduce measurement uncertainty, enabling repeatable go/no‑go checks and minimising rework. When integrated into a quality routine, this instrument supports traceable verification of mating bores and finished shafts and helps to maintain stable production tolerances. The precise fit and minimal form error are particularly valuable when gauging seating surfaces and critical end dimensions. Robust, workshop‑ready construction that keeps checks practical Made from special steel and specified at 50 mm length, the component combines stiffness with a compact footprint that suits bench‑top inspection and fixture use. The workshop execution emphasises durability under frequent handling, while the measured weight (approx. 0.024 kg) contributes to easy positioning without unnecessary mass. The solid construction simplifies repeated insertion cycles and supports reliable tactile feel during go/no‑go assessments. For production environments where rapid, repeatable checks are required, the robust material choice maintains geometric stability over many cycles. Designed for end‑gauge tasks, fixtures and precision assembly Intended as an end gauge for inspection and alignment, the pin is suitable for use in dedicated gauge sets, assembly jigs and comparative measuring fixtures. Its nominal diameter and fine tolerance make it appropriate for verifying bore fit, setting up spindles or confirming plug fits during final assembly. The compact, single‑piece format simplifies storage and identification in inspection kits and supports efficient workflow in small‑batch and series production alike. Where control of final mating dimensions is essential, the component provides a straightforward tactile and visual reference. For workshop‑grade end‑measurement and reliable inspection choose the Metav IndustryLine gauge pin M323.804 — contact Metav Werkzeuge for availability and technical consultation from Emmerich. Technical data SKU: M323.804 GTIN: 4061905064098 eClass: 21170231 Core specifications Diameter: 8.04 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.024 kg Features & materials Material: special steel Workshop execution Single gauge pin for end‑gauge use Category: Gauge pins FAQ What level of accuracy does this gauge pin provide? The gauge pin M323.804 delivers an accuracy of ±0.001 mm, making it suitable for highly precise end‑gauge and fit checks in workshop and inspection stations. Is the gauge pin suitable for use in production fixtures? Yes, the Metav IndustryLine gauge pin is designed for fixture and jig use; the 50 mm length and robust special steel construction suit repeated insertion and positioning tasks. Which applications is the part intended for? Typical uses include final bore checks, go/no‑go verification, setup of mating parts and comparative inspections where the 8.04 mm nominal size is required. How is the component identified for ordering? Order reference is M323.804 (Metav IndustryLine); the GTIN 4061905064098 can be used for electronic procurement and inventory systems. Can this pin be used as a reference gauge in inspection sets? Yes, the precision and compact format of the gauge pin make it a reliable reference element within inspection kits and assembled gauge sets. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.05mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑tight ±0.001 mm tolerance, robust special steel construction and an exact 8.05 mm nominal diameter for reliable end‑measurement control. Order the test pin directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.805 — Single precision pin, 8.05 mm diameter, ±0.001 mm tolerance Test pin M323.805 is a single‑piece, workshop‑grade gauge pin designed for precise end‑measurement and go/no‑go checks in routine inspection tasks. Diameter 8.05 mm with ±0.001 mm tolerance Length 50 mm in workshop execution Made from special steel for long‑term wear resistance Single‑piece gauge for repeatable end measurements Exceptional accuracy that reduces rework and rejects The gauge pin delivers an accuracy of ±0.001 mm, which translates into measurable benefits on the shop floor: fewer false rejects, tighter process control and reduced rework. With a nominal diameter of 8.05 mm and a protected measuring length of 50 mm, the element is optimised for end‑measure verification and dimensional reference checks. The tight tolerance is particularly valuable where small clearances or interference fits are specified; replacing trial‑and‑error checks with a defined reference pin shortens setup times and improves batch consistency. Robust construction for continuous inspection use Manufactured from special steel, this single test pin is intended for repetitive use under workshop conditions. The material choice provides abrasion resistance and dimensional stability during repeated contact inspections, helping to maintain the original calibration state for longer. The workshop execution prioritises a compact, single‑piece design that is easy to handle and store alongside other inspection tools, making it suitable for in‑process checks and final acceptance tests on assemblies and components. Designed to integrate with inspection routines and traceability workflows As a precision end‑measurement tool, the pin supports standardised inspection procedures and simplifies documentation of conformity in serial production. The clear specification — 8.05 mm diameter, ±0.001 mm tolerance and 50 mm length — enables straightforward recording in quality logs and process sheets. The model M323.805 is suitable as a master reference in gauging fixtures or as a go/no‑go element for quick decisions at the bench, helping to maintain throughput while preserving measurement integrity. Choose the Metav IndustryLine test pin M323.805 for repeatable, workshop‑grade end‑measurement control — contact Metav Werkzeuge in Emmerich for ordering and application guidance Technical data Article number: M323.805 GTIN: 4061905059667 Weight: 0.024 kg Manufacturer: Metav IndustryLine Facts Nominal diameter: 8.05 mm Tolerance: ±0.001 mm Length: 50 mm Single‑piece gauge Special features Material: Special steel Workshop execution Application: end‑measurement / reference pin Category: Gauge pin / test pin FAQ What tolerance is guaranteed for this test pin? The test pin M323.805 is specified with a tolerance of ±0.001 mm for the nominal 8.05 mm diameter. Which material is used for the pin? The pin is manufactured from special steel, selected for wear resistance and dimensional stability during repeated inspections of components. For which inspection tasks is this pin suitable? The pin is intended for end‑measurement checks, reference gauging and quick go/no‑go decisions in workshop and production inspection routines. How is the test pin supplied? The product is supplied as a single gauge pin with a length of 50 mm and a clearly defined nominal diameter of 8.05 mm. Can this pin be used for serial production checks? Yes; the combination of robust material and tight tolerance makes M323.805 suitable as a repeatable reference for serial inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.06mm Gauge Pin ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of workshop-grade precision and robust construction: the 8.06 mm diameter with a tight ±0.001 mm tolerance and a 50 mm length ensure reproducible end‑measure checks and reliable go/no‑go fitting. Order the gauge pin directly via Metav Werkzeuge or consult the technical team for specification support. M323.806 Gauge pin — Test pin, Ø 8.06 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.806 Gauge pin is a workshop‑grade precision test pin designed for end‑measure verification and dimensional checking in production and inspection environments. Workshop‑grade precision instrument Diameter 8.06 mm ±0.001 mm tolerance Length 50 mm for deep bore checks Made from special steel for durability Consistent accuracy for critical tolerances The pin’s core advantage is its ±0.001 mm geometric accuracy, which supports repeatable pass/fail assessments and tight tolerance verification. Manufactured as a single‑piece test pin with a nominal diameter of 8.06 mm, the component is intended for applications where small deviations translate directly into assembly or functional faults. The exacting tolerance reduces inspection ambiguity and shortens decision cycles on part acceptance, helping to lower rework rates and maintain steady production throughput. Practical design that fits workshop routines With a 50 mm overall length and a compact mass of approximately 0.024 kg, this test pin is balanced for manual handling and fixture use alike. The special steel construction offers wear resistance in regular inspection routines and preserves the measurement surface over many cycles. The workshop execution of the product emphasises robustness without compromising dimensional stability, so the pin is suitable for repeated insertion into bores or for use as a reference mandrel in fixture checks. Simple integration into quality processes Traceability is supported by the clear article identifier (SKU M323.806) and GTIN, which simplify stock management and documentation. The gauge pin functions effectively as an end‑measurement reference in go/no‑go tests, assembly checks and periodic control routines; by providing a stable reference dimension, it streamlines inspection steps and contributes to faster, more reliable quality decisions on the shop floor. For workshop‑grade, traceable precision choose the Metav IndustryLine M323.806 gauge pin; contact Metav Werkzeuge in Emmerich for specification advice or to arrange supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.806 GTIN: 4061905059674 Facts Diameter: 8.06 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.024 kg Special features Material: special steel Workshop execution Suitable for end‑measure checks and go/no‑go fitting FAQ What is the primary application of this gauge pin? The M323.806 gauge pin is intended for end‑measure verification, go/no‑go tests and dimensional checking in production and inspection workflows. How tight is the dimensional tolerance? The test pin is specified to ±0.001 mm, making it suitable for high‑precision inspection tasks where minimal deviation is critical. What material is used for the pin and how does it affect durability? Constructed from special steel, the pin offers good wear resistance and surface stability during repeated insertion and fixture use. Can the pin be used in fixtures and assembly jigs? Yes, the compact 50 mm length and workshop‑grade build make the pin appropriate as a reference mandrel in fixtures and assembly checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.07mm Gauge Pin Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of high repeatability and robust workshop construction with the precision 8.07 mm gauge pin. With a ±0.001 mm tolerance and a 50 mm shank, this compact measuring pin ensures consistent end‑measurements and reliable fixture checks — order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.807 — 8.07 mm, ±0.001 mm, Metav IndustryLine The Gauge pin M323.807 is a workshop‑grade precision end‑measurement pin designed for repeatable go/no‑go checks, calibration tasks and setting fixtures in metalworking environments. High precision ±0.001 mm tolerance Diameter 8.07 mm for end‑measurement tasks Workshop‑grade special steel construction Supplied in a protective case for transport Micrometre-level repeatability for measurement assurance Engineered for demanding inspection routines, this gauge pin delivers ±0.001 mm repeatability that supports tight acceptance criteria in production and quality control. The nominal 8.07 mm diameter is held to the stated tolerance along the measuring length, reducing ambiguity when performing end‑face checks or verifying bore limits. In practice, such accuracy minimises false rejects and shortens inspection loops because a single unequivocal reference dimension replaces repeated comparative measurements. The result is a measurable increase in throughput and a more consistent quality record. Robust, workshop‑ready design that withstands daily use Built as a workshop‑grade tool from special steel, the pin combines wear resistance with manageable mass for handheld gauging and fixture insertion. A 50 mm shank length provides stable engagement and easy handling while remaining compact enough for tight jigs and gauges. The supplied protective case ensures secure transport between bench and production line, keeping the measuring face free from nicks that would compromise accuracy. Maintenance is straightforward: a clean, dry storage and occasional light lubrication preserve surface condition and dimensional integrity. Integrates simply into inspection and setup workflows The dimensional clarity of this gauge pin simplifies both manual checks and semi‑automated routines. The pin is suitable for fixture setting, end‑measurement verification and as a reference in comparator arrangements, helping to reduce setup time and rework. Traceability is supported by clear identification: SKU M323.807 and GTIN records can be logged alongside measurement records for audit trails. Where interchangeability and repeatable results matter, the pin shortens decision paths and supports consistent quality output with minimal operator training. Contact Metav Werkzeuge today to discuss how the M323.807 gauge pin fits into existing inspection routines — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and supply from our Emmerich site Technical data Article number: M323.807 GTIN: 4061905059681 Manufacturer: Metav IndustryLine Label: Gauge pin, single, 8.07 mm, ±0.001 mm, length 50 mm Facts Diameter: 8.07 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.024 kg Special features Material: special steel Version: Workshop execution Supplied in protective case Category: Gauge pins (Messstifte) FAQ What tolerance does the pin offer? The M323.807 gauge pin is specified to ±0.001 mm tolerance, providing micrometre‑level control for end‑measurement tasks. Is the pin suitable for fixture setting and go/no‑go checks? Yes — the workshop‑grade construction and precise 8.07 mm diameter make this gauge pin ideal for fixture setting, go/no‑go verification and calibration checks. What material is used for the pin and why does it matter? The pin is made from special steel, chosen for wear resistance and dimensional stability so that the measuring face remains reliable through repeated use. How is the pin delivered and protected? Delivery includes a protective case to prevent transport damage and maintain the measuring surface in workshop conditions. Can this pin be logged for traceability in quality records? Yes — use the SKU M323.807 and GTIN shown in the technical data for traceable documentation within inspection and audit systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.08mm Gauge Pin ±0.001 mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of high‑precision control with a diameter accuracy of ±0.001 mm and a compact 50 mm length for reliable end‑measurement references; order the gauge pin directly via Metav Werkzeuge or request advice from our consultants for specification guidance. Gauge pin M323.808 — 8.08 mm, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) Gauge pin M323.808 is a single inspection pin intended for dimensional verification and end‑measurement checks in precision work and small‑part inspection. Diameter 8.08 mm ±0.001 mm tolerance 50 mm length for secure handling and reference use Special steel for abrasion resistance and longevity Workshop‑grade finish for repeatable results Precision where micrometres decide The central asset of this inspection pin is its ±0.001 mm dimensional accuracy, which positions the component within the sub‑millimetre inspection class required for fine mechanical parts and close‑tolerance fits. With a nominal 8.08 mm diameter and a rigid 50 mm shaft, the pin serves as a dependable reference for end‑measure checks, alignment checks and comparative gauging. The tight tolerance reduces uncertainty in pass/fail assessments and supports reproducible measurements when used with micrometres, comparator rigs or fixture references. Robust construction for repeated reference use Manufactured from special steel, this workshop‑grade pin has been finished to provide stable contact surfaces during repetitive use. The 50 mm length offers a practical balance between grip and immersion depth for many inspection tasks, while the compact mass facilitates swift positioning and reduces the risk of flexing in hand or fixture. These material and dimensional choices translate into lower wear over repeated cycles and a steady measurement baseline that saves rework and downtime in small‑part inspection workflows. Practical integration into metrology workflows As an inspection device for end measurements and reference checks, the pin fits into standard inspection routines and fixture setups without complex adaptation. The product is identified as M323.808, making it straightforward to log in inventory systems or link to inspection protocols. Where control charts, batch testing or traceable documentation are required, the pin provides a stable datum that streamlines measurement comparability across shifts and machines. This combination of high repeatability and convenient form factor supports efficient quality control in small‑component assembly and toolmaking. Contact Metav Werkzeuge for specification advice and fast supply from Emmerich — our team will confirm suitability for your inspection setup and arrange immediate delivery from stock Technical data Article number: M323.808 GTIN: 4061905059698 Brand: Metav IndustryLine Core specifications Diameter: 8.08 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.024 kg Features and materials Material: special steel Intended use: end measurement / inspection pin Version: workshop execution Category: gauge pin / inspection pin FAQ What level of accuracy does this inspection pin provide? The gauge pin M323.808 delivers an accuracy of ±0.001 mm, suitable for sub‑millimetre inspection tasks where micrometre‑level distinction is required. Is the pin suitable for repeated use in workshop measuring fixtures? Yes. The special steel construction and workshop version finish of the M323.808 are designed for repeated reference use in fixtures and small‑part inspection. Can this pin be used with micrometres and comparator systems? The 8.08 mm diameter and 50 mm length make the M323.808 compatible with micrometres, comparator setups and bespoke fixture arrangements for end‑measurement checks. Which applications are typical for this inspection pin? Applications include dimensional verification of small bores and shafts, alignment reference in assembly fixtures, and comparative checks in toolmaking and component inspection. How is the product identified for ordering and documentation? The product is listed as M323.808 under the Metav IndustryLine range and carries GTIN 4061905059698 for traceable documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.09mm Gauge Pin Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from micrometre-level control and robust workshop design: the gauge pin combines ±0.001 mm dimensional accuracy with a stable 50 mm length for repeatable end-dimension checks; order the part directly via Metav Werkzeuge or consult our advisers for application support. Gauge pin M323.809 — single gauge pin, Ø 8.09 mm, ±0.001 mm accuracy (Metav IndustryLine) A single gauge pin M323.809 designed for precise end-dimension inspection and reference measurements in workshop and inspection settings Workshop version construction Tolerance ±0.001 mm Ø 8.09 mm precision diameter Length 50 mm for stable handling Micrometre-level final-dimension control for reliable quality assurance The instrument delivers an ultra-fine tolerance of ±0.001 mm (one micrometre), which places it in the class of high-precision gauge tools suitable for final-dimension verification. Such accuracy reduces uncertainty when checking bore or pin fits, enabling reproducible pass/fail decisions during incoming inspection or final assembly. The tight tolerance is particularly beneficial where small clearance margins determine functional performance, and it supports objective measurement protocols that improve production yield. Robust workshop design that makes measurements repeatable Manufactured in special steel and specified as a workshop version, the pin offers a hard-wearing contact surface and dimensional stability over repeated cycles. The 50 mm shank provides secure gripping and reduces the effect of fingertip torque during handling, while the Ø 8.09 mm nominal diameter ensures compatibility with common reference fixtures and gauges. This combination of material choice and geometry translates to fewer measurement variations and a dependable reference for shop-floor and QC processes. Practical inventory and application benefits for production environments As a single reference gauge for end-dimension checks, the part is compact to store and easy to integrate into existing inspection routines. The clear article identifier (SKU M323.809) and GTIN support straightforward stockkeeping and traceability within a quality-management system. Choosing the Metav IndustryLine variant aligns a workshop with a provider that emphasises reliable supply and accessible precision tools, which helps to simplify purchasing decisions and to maintain continuous production uptime. Secure micrometre accuracy with the Metav IndustryLine gauge pin — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for specification matching and supply assistance Technical data Article number: M323.809 GTIN: 4061905059704 Eclass: 21170231 Label: Gauge pin, single, 8.09 mm, ±0.001 mm, length 50 mm Facts Diameter: 8.09 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.024 kg Special features Workshop version Material: special steel Intended use: end-dimension checks Single gauge pin FAQ What tolerance does this gauge pin offer? The gauge pin M323.809 provides a tolerance of ±0.001 mm, suitable for micrometre-level inspection and fine tolerance verification. Which material is the pin made from? The pin is manufactured from special steel, specified for workshop durability and stable contact surfaces. For which applications is this pin intended? This single gauge pin is intended for end-dimension checks, reference measurements and bore verification in workshop and inspection environments. How is the item identified for inventory? Identification is via the SKU M323.809 and GTIN 4061905059704, supporting traceability and stockkeeping. Is the design suitable for repetitive shop-floor use? Yes—its workshop version design and 50 mm length provide robust handling for repeated measurements with reduced variability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.11mm Gauge Pin Single, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
The precise ±0.001 mm tolerance and the compact 8.11 mm diameter with a 50 mm length make this inspection pin a reliable choice for repeatable end‑measure checks; coupled with a robust special steel construction it supports consistent workshop workflows — order the M323.811 gauge pin directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. M323.811 Gauge pin – 8.11 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) M323.811 is a single precision gauge pin designed for end‑measure inspection and tooling verification in workshop environments Workshop execution, durable design High precision ±0.001 mm tolerance Diameter 8.11 mm, usable length 50 mm Accuracy that secures process reliability The remarkably fine ±0.001 mm tolerance of this inspection pin ensures reproducible checks of end measures and finished bores, reducing the risk of unnoticed deviations in serial production. With such a narrow tolerance band, the pin serves as a deterministic reference for go/no‑go checks and comparative inspection routines, enabling clear pass/fail decisions and supporting quality control processes that demand traceable dimensional certainty. The compact mass also minimises thermal drift during short inspection cycles. Compact geometry for tight spaces and fixture checks The slender 8.11 mm diameter and 50 mm length create a geometry that is easy to handle in confined setups and practical for fixture alignment or plug‑type measurements. The low mass (approx. 0.025 kg) improves manual positioning and reduces the influence of inertia when gauging small components. In workshop contexts where accessibility and repeatability matter, this inspection pin functions effectively as a plug gauge, mandrel or reference dowel for quick verification of bores, seats and end faces. Material choice and workshop suitability Manufactured from special steel and supplied in a workshop execution, the pin is built for regular use under production conditions. The material selection aims to provide a stable contact surface and wear resistance appropriate for routine inspection tasks without overstating performance beyond the provided data. As a single‑piece inspection tool with industrial design, it integrates well into standard measurement benches and manual gauges, contributing to dependable measurements across repetitive inspection steps. Consider Metav IndustryLine’s M323.811 gauge pin when precise end‑measure verification is required; order via Metav Werkzeuge for a reliable supply from Emmerich and request application advice from our specialists if needed Technical data SKU: M323.811 GTIN: 4061905060519 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 8,11mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 8.11 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.025 kg Special features Material: Special steel Workshop execution Category: Gauge pins (Messstifte) Application hint: end‑measure inspection FAQ What is the measurement tolerance of the M323.811 gauge pin? The M323.811 gauge pin is specified with a tolerance of ±0.001 mm, making it suitable for fine inspection tasks that require high repeatability. For which inspection tasks is the M323.811 gauge pin suitable? The M323.811 gauge pin is intended for end‑measure checks, bore verification and fixture alignment in workshops and production lines where compact reference pins are required. Is a calibration certificate supplied with the M323.811 gauge pin? The product data for the M323.811 gauge pin does not specify a calibration certificate; calibration status is not listed in the available information. What material is used for the M323.811 gauge pin? The M323.811 gauge pin is made from special steel, chosen for stable contact properties appropriate to routine workshop inspection. How should the M323.811 gauge pin be handled and stored? Handle the M323.811 gauge pin with clean hands or gloves to avoid contamination; store in a dry, stable environment away from corrosive agents and heavy impacts to preserve dimensional accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.12mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine accuracy, robust workshop execution and traceable identification for reliable end‑measurements; order the gauge pin directly via Metav Werkzeuge or consult our specialists for batch supply. Gauge pin M323.812 — single 8.12 mm, ±0.001 mm accuracy (Metav IndustryLine) A single gauge pin, the M323.812, engineered for high‑precision end measurements in workshop and inspection applications. Single gauge pin 8.12 mm, tolerance ±0.001 mm Length 50 mm for stable insertion and positioning Made from special steel for wear resistance Workshop execution for robust daily use Accuracy that secures acceptance in production The M323.812 delivers ±0.001 mm positional accuracy, a level that reduces measurement uncertainty in go/no‑go checks and end‑measurement tasks. Such precision is especially valuable where small tolerances decide part acceptance; the fine tolerance minimises rework and supports faster quality decisions. Measured performance is ideal for precision jigs, fixture checks and final inspection steps, improving throughput without compromising traceability. Robust design for repeatable handling on the shop floor With a 50 mm length and a nominal 8.12 mm diameter, this single gauge pin balances insertion stability and accessibility in assemblies. The special steel construction resists surface wear under repeated use, which preserves dimensional integrity over many cycles. The workshop execution prioritises reliable handling: chamfered ends for easy entry, a smooth bearing surface for consistent seating and a compact mass of approximately 0.025 kg for convenient storage and transport. Workflow benefits: faster checks and fewer disputes Using a standardised precision pin reduces downtime during inspection and simplifies acceptance criteria between suppliers and production. The clearly defined 8.12 mm nominal size and micron‑level tolerance allow integration into automated gauge blocks, fixture audits and manual go/no‑go sequences. The compact form factor supports rapid interchange in multi‑station fixtures, helping to maintain cycle time while offering measurable improvements in first‑pass yield. Contact Metav Werkzeuge for supply and technical advice on the M323.812 single gauge pin and secure consistent measurement performance across production lines Technical Data SKU: M323.812 GTIN: 4061905060526 Manufacturer: Metav IndustryLine Facts Diameter: 8.12 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.025 kg Special features Single gauge pin, workshop execution Material: special steel Designed for end‑measurement and fixture checking Suitable for repeated insertion checks FAQ What tolerance does this gauge pin offer? The M323.812 gauge pin is specified to ±0.001 mm, suitable for micron‑level end measurements and tight acceptance checks. Is the gauge pin suitable for repeated workshop use? Yes, the workshop execution and special steel material make the pin robust for frequent insertion and inspection cycles. How is the M323.812 typically applied in inspection workflows? It is used for go/no‑go checks, fixture alignment and end‑measurement verification where a precise fixed diameter establishes conformity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.13mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from workshop‑ready precision: the compact design combines a precise Ø 8.13 mm gauge with an exceptionally tight ±0.001 mm tolerance and a practical 50 mm length for reliable end‑measure checks. Order the part directly via Metav Werkzeuge or ask our consultants for application advice. Gauge pin M323.813 — Single test pin, Ø 8.13 mm, ±0.001 mm (Metav IndustryLine) Gauge pin M323.813 — a single precision test pin for dimensional checking and end‑measure verification in workshop metrology Precision diameter 8.13 mm, tolerance ±0.001 mm 50 mm hardened special steel Workshop execution for robust use Supplied in protective case Repeatable accuracy for production checks The compact test pin delivers high repeatability by combining a precisely ground 8.13 mm diameter with a fine ±0.001 mm manufacturing tolerance — a level of precision that supports tight acceptance limits in component inspection. Thanks to the special steel construction and workshop‑grade finish, the pin sustains surface integrity under regular use, which reduces the risk of measurement drift during routine checks. This makes it an effective tool for end‑measure verification, jig alignment and short‑range plug‑gauging tasks without introducing unnecessary handling complexity. Robust design that suits everyday workshop use Built as a workshop execution component, the pin withstands mechanical handling typical in busy production areas. The 50 mm length balances reach and rigidity so that measurements remain stable while handling is simple and secure. The compact weight and form factor support fast interchangeability in inspection routines; when stored in the supplied protective case, the risk of accidental damage or contamination is minimised, prolonging service life and preserving the calibrated geometry where present. Clear specifications to integrate into inspection routines The plain geometry and narrow tolerance make this test pin straightforward to document in control plans and measurement procedures. The simple shape supports rapid visual inspection and easy cleaning; when used as a reference element in fixtures or measuring jigs, the consistent diameter and hard material reduce wear on mating components. For quality managers and workshop technicians, the combination of ±0.001 mm tolerance and compact length provides a reliable reference that complements go/no‑go gauges and small bore inspection tools without adding complexity. Discuss application suitability and delivery options for the Metav IndustryLine gauge pin M323.813 with Metav Werkzeuge to ensure the right fit for workshop inspection needs. Technical data SKU: M323.813 GTIN: 4061905060533 Material: Special steel Diameter: 8.13 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.025 kg Facts Diameter: 8.13 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.025 kg Special features Single test pin Workshop execution Supplied in protective case Category: Gauge pins Intended for end‑measure and dimensional checks FAQ What is this pin typically used for? The Metav IndustryLine gauge pin M323.813 is intended for dimensional checking, end‑measure verification and short‑range plug‑gauging in workshop metrology. Does the product include a calibration certificate? The available product data does not specify an included calibration certificate for the M323.813 gauge pin. What material is the pin made from? The pin is manufactured from special steel, chosen for wear resistance and dimensional stability in workshop conditions. How tight is the manufacturing tolerance? The gauge pin is produced to a tolerance of ±0.001 mm, suitable for fine inspection tasks and tight acceptance criteria. Is the pin delivered ready for safe storage and transport? Yes, the workshop execution variant of the M323.813 is supplied in a protective case to reduce the risk of damage during storage and transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.14mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of workshop-grade construction, micrometric ±0.001 mm accuracy and a compact 50 mm length for reliable end-dimension checks and setting tasks. Order the gauge pin directly via Metav Werkzeuge or consult the product specialists if further clarification is required. Gauge pin M323.814 – single pin, Ø 8.14 mm, ±0.001 mm (Metav IndustryLine) Gauge pin M323.814 is a single, high-precision checking pin for dimensional verification and fixture setting in workshop metrology *High-precision ±0.001 mm tolerance *Diameter 8.14 mm for tight fits *50 mm length for standard setting tasks *Workshop-grade special steel construction Keep production within narrow tolerances The M323.814 is designed for applications where dimensional certainty prevents rework and scrap. With a certified manufacturing tolerance of ±0.001 mm, this single gauge pin enables extremely fine go/no‑go checks and precise reference measurements for final part control. The 8.14 mm diameter serves as a reliable datum for end-dimension verification, helping to maintain consistent production quality and reducing the need for corrective machining. Built for everyday workshop use Labelled as a workshop execution, the pin combines compact dimensions with robust material selection to cope with routine handling. The body is manufactured from special steel, offering a balance between wear resistance and dimensional stability under normal workshop conditions. The 50 mm length provides enough engagement for setting and verification tasks while remaining easy to handle and store. The single-piece supply simplifies inventories where individual replacement pins are required. Simple identification and integration into stock systems Procurement and inventory control are simplified by clear identifiers and compact data: SKU M323.814 and GTIN 4061905060540 enable straightforward ordering and stock tracking. The compact mass (approximately 0.025 kg) permits efficient storage and fast picking for assembly lines or inspection benches. As an end-dimension checking tool, this pin is particularly suited to repeat checks, fixture setup and quick in-process verifications where traceable, repeatable references are required. Choose the Metav IndustryLine gauge pin for reproducible end-dimension measurements and contact Metav Werkzeuge in Emmerich for procurement or technical advice Technical data Article number: M323.814 GTIN: 4061905060540 eClass: 21170231 Facts Diameter: 8.14 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.025 kg Special features Material: special steel Single item, workshop execution High-precision manufacturing FAQ What is the primary use of this gauge pin? The gauge pin M323.814 is intended for precise dimensional verification and fixture setting, serving as a reference for end-dimension and go/no‑go checks. How accurate is the pin and what does that mean for production? With a tolerance of ±0.001 mm, the pin provides micrometric accuracy that reduces measurement uncertainty and supports tight production tolerances. Which materials and tasks suit this gauge pin? The pin is a general-purpose checking tool for workshop metrology tasks such as setting, verifying bore fits and repeat inspections on metal and machined components. How does the construction reflect workshop requirements? The workshop-grade special steel construction and compact 50 mm length balance durability with ease of handling for routine inspection and setting tasks. How is the product identified for ordering and stock control? Identification is via SKU M323.814 and GTIN 4061905060540, which streamlines procurement and inventory management Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.15mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the pin's ultra‑fine tolerance and robust workshop design to secure reproducible end‑measurements with minimal setup time; the gauge pin's ±0.001 mm accuracy and 50 mm length ensure reliable fit testing across production runs. Order the single inspection pin directly via Metav Werkzeuge or consult the Metav team for specification matching. M323.815 Gauge pin — 8.15 mm, ±0.001 mm (Metav IndustryLine) The M323.815 is a single gauge pin for precision end‑measurements and go/no‑go checks in workshop and inspection environments. Workshop version for robust daily use Diameter 8.15 mm with ±0.001 mm accuracy Length 50 mm for precise end measurements High‑precision control that reduces rework Designed for inspection tasks where dimensional certainty matters, this gauge pin offers ±0.001 mm (1 µm) tolerance to support tight acceptance criteria. Such fineness of control reduces the need for repeated adjustments and downstream rework, improving throughput in small‑batch and serial production alike. The pin acts as a reliable reference for plug and bore checks, helping to validate assembly fits and final tolerances without complex fixtures. Built for everyday handling in industrial workshops The workshop configuration combines a hardened special steel construction with a compact 50 mm length to balance stiffness and manoeuvrability. The robust finish resists typical wear encountered during daily use, while the single‑piece design simplifies storage and selection in inspection trays. Delivery includes a protective case for safe transport and handling, preserving the measuring surface between uses. Practical benefits: quick checks, consistent results With an exact diameter of 8.15 mm, the pin supports repeatable go/no‑go assessments and end‑mass verifications across batches. The simple geometry minimises handling variance, so measurement routines can be standardised on the shop floor and integrated into quality control procedures. Traceable dimension conformity shortens inspection cycles and provides a dependable reference for assembly checks. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine M323.815 gauge pin into inspection routines; call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm suitability and availability Technical data Article number: M323.815 GTIN: 4061905060557 Label: Prüfstift, einzeln, 8,15mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 8.15 mm Length: 50 mm Tolerance: ±0.001 mm (1 µm) Weight: 0.025 kg Special features Material: Special steel Workshop execution for everyday use Delivered in protective case for transport Single inspection pin for end measurements Category: Gauge pins (Messstifte) FAQ What inspections is this gauge pin suited for? The M323.815 gauge pin is intended for end‑measurements, plug and bore checks and go/no‑go verifications where a precise 8.15 mm reference is required. Is the tolerance of ±0.001 mm sufficient for bore acceptance testing? Yes, the ±0.001 mm tolerance of this inspection pin provides sub‑micrometre precision suitable for tight acceptance criteria and fine fit validation. What is the material and how does it affect wear resistance? The pin is made from special steel, chosen for durability and resistance to wear encountered during frequent insertion and removal. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com