Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
8.16mm Gauge Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine accuracy and robust workshop design for reliable end‑measurement tasks; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.816 — 8.16 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.816 is a single precision reference pin intended for end‑measurement checks and go/no‑go reference tasks in machine workshops and inspection benches Single gauge pin, 8.16 mm nominal diameter High precision: ±0.001 mm tolerance Length 50 mm, workshop version Supplied in transport box for protection Accurate reference for tight tolerances The Gauge pin M323.816 delivers an 8.16 mm nominal diameter with an exceptional ±0.001 mm tolerance, providing a trusted reference for end‑measurement and dimensional verification. The fine tolerance reduces measurement uncertainty and shortens inspection cycles by eliminating repeat checks. As a hardened reference element made from special steel, the pin maintains its geometry under regular handling, which supports consistent pass/fail decisions in quality control and helps to secure process reliability in production environments. Built for shopfloor durability and repeatability Designed as a workshop version, the pin withstands frequent use while preserving the contact geometry required for reproducible results. The 50 mm length gives sufficient working engagement for many end‑measurement scenarios without adding unnecessary mass; its low mass (approx. 0.025 kg) makes handling and fixture placement straightforward. Delivery in a transport box protects the gauge during storage and transit, reducing the risk of nicks that would compromise accuracy and thus lowering lifecycle costs through prolonged serviceability. Practical integration into inspection routines The compact form of this precision pin simplifies incorporation into inspection jigs, pin blocks and alignment setups, enabling faster routine checks and reduced setup time. Traceable identification (SKU M323.816 / GTIN 4061905060564) simplifies stockkeeping and quality documentation. Using a calibrated reference element with such fine tolerance supports tighter process control and helps to avoid downstream rework, improving throughput and preserving component integrity. For assured end‑measurement performance, contact Metav Werkzeuge to discuss the Metav IndustryLine gauge pin and its suitability for specific inspection tasks or to request procurement support from our Emmerich team Technical data Article number: M323.816 GTIN: 4061905060564 Manufacturer: Metav IndustryLine Facts Diameter: 8.16 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.025 kg Measurement range min/max: 8.16 mm Special features Material: Special steel Workshop version Supplied in transport box for transport protection Category: Gauge pins (Messstifte) Story trigger: end measurements FAQ What nominal diameter does this gauge pin have? The Gauge pin M323.816 has a nominal diameter of 8.16 mm. What is the stated tolerance for this gauge pin? The tolerance is ±0.001 mm, making the pin suitable for very fine end‑measurement references. How long is the pin and how is it packaged? The pin is 50 mm long and is supplied in a transport box to protect the measuring faces during storage and transit. What material is used for the gauge pin? The pin is manufactured from special steel, selected for dimensional stability and wear resistance in workshop use. Which applications suit this precision pin best? Typical uses include end‑measurement checks, reference gauges in inspection jigs and pin checks during assembly, where tight tolerance verification is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.17mm Gauge Pin, Workshop Version, ±0.001 mm Accuracy, 50mm Length - Metav IndustryLine
Take advantage of precise, repeatable checks with a compact, workshop‑grade gauge pin that combines ±0.001 mm tolerance and a robust special steel construction for dependable in‑process inspection. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application guidance. Gauge pin, 8.17 mm ±0.001 mm — Workshop version (Metav IndustryLine) Gauge pin, 8.17 mm ±0.001 mm is a single‑piece inspection pin intended for dimensional end checks and fixture setting in workshop environments Workshop version for daily use Diameter 8.17 mm ±0.001 mm precision 50 mm overall length for stable handling Supplied in protective transport case Accurate tolerance for repeatable inspection The gauge pin is manufactured to a nominal diameter of 8.17 mm with an accuracy of ±0.001 mm, delivering high precision for go/no‑go checks, alignment and end‑measurement tasks. This level of tolerance reduces uncertainty in pass/fail decisions and minimises rework by ensuring that each verification is directly comparable to the nominal size. The compact geometry and fine finish support consistent contact conditions, which is essential when multiple operators perform short, repeat inspections during production runs. Robust build tailored to workshop conditions Produced from special steel, the pin offers a balance of hardness and toughness suitable for frequent handling in a workshop setting. With a length of 50 mm and a low mass (approx. 0.025 kg), the component is easy to position and manoeuvre while providing enough gripping length for stable use in jigs and fixtures. The workshop version designation indicates practical attention to everyday demands: corrosion‑resistant surface quality, repeatable seating in holders, and straightforward cleaning. The item is supplied in a transport case to protect the gauge during storage and transit. Streamlined inspection workflow and compatibility As a single‑gauge solution, the pin supports quick setup for dimensional verification and fixture setting, helping to shorten inspection cycles and improve throughput. The clearly defined nominal and tolerance values facilitate integration into inspection plans and documentation. Marked with its product code and identifiable by its characteristic finish, the component is suitable for use in conventional measurement benches and as an end reference in gauge stacks, contributing to repeatable results across shifts without complex calibration requirements specified in the baseline data. For reliable workshop gauging, request the Metav IndustryLine gauge pin (M323.817) from Metav Werkzeuge — contact via info@metav-werkzeuge.com or call +49 2822 7131930 for order details and application advice Technical data Article number: M323.817 GTIN: 4061905060571 Brand: Metav IndustryLine Material: Special steel Facts Nominal diameter: 8.17 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.025 kg Special features Workshop version Supplied in transport case for transit protection Intended for end‑measurement and fixture setting Compact, single‑piece gauge pin design FAQ What are the nominal diameter and tolerance of the pin? The gauge pin M323.817 has a nominal diameter of 8.17 mm and a tolerance of ±0.001 mm. Which material is used for this gauge pin? This Metav IndustryLine gauge pin is made from special steel, chosen for wear resistance and stable contact behaviour. Is the pin suitable for end‑measurements and fixture setting? Yes. The M323.817 is designed for end measurements and as a reference element in fixture alignment and quick verification tasks. How is the product supplied for transit? The gauge pin M323.817 is supplied in a protective transport case to prevent damage during handling and transport. What routine maintenance is recommended? Regular cleaning, inspection for wear marks and light corrosion protection are recommended; store the pin in its transport case when not in use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.18mm Precision Gauge Pin ±0.001 mm Length 50 mm Workshop Version, Special Steel - Metav IndustryLine
Benefit from a compact, workshop-ready test pin that combines 1 µm tolerance, a precise 8.18 mm nominal diameter and a practical 50 mm reference length for reliable end‑dimension checks; order directly via Metav Werkzeuge or consult their specialists for application advice. Gauge pin M323.818 — precision 8.18 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.818 is a single precision pin for end‑dimension verification and reference measurements in workshop inspection and quality control. High-precision tolerance ±0.001 mm 8.18 mm nominal diameter Length 50 mm for reference checks Workshop version for robust handling Precision for reproducible end‑dimension checks The gauge pin is specified with a tolerance of ±0.001 mm (equivalent to 1 µm), which positions it within the high‑precision class for dimensional references. Such a fine tolerance means the pin delivers repeatable contact points for plug or reference measurements, reducing uncertainty when setting up fixtures or verifying small bores. By converting the tight dimensional specification into consistent inspection results, the pin supports production decisions that rely on exact end‑dimension conformity rather than subjective judgement. Built for workshop durability and consistent use Constructed from special steel, this single test pin is produced in a workshop version designed to withstand routine handling while preserving measurement integrity. The material choice and compact geometry ensure low susceptibility to bending and thermal drift during normal shop processes, so calibration intervals remain practical. Durability in combination with the fine tolerance translates into fewer replacements and stable reference behaviour across repeated measurement cycles. Simple handling and straightforward integration into inspection routines With a 50 mm length and a nominal 8.18 mm diameter, the pin serves as an uncomplicated reference tool for end‑dimension checks, fixture set‑up and quick pass/fail verifications. The single‑piece format allows direct use in comparison against master gauges or as a reference in pneumatic or manual checking fixtures. Its compact form factor and clear metrological specification facilitate easy documentation in inspection plans and seamless incorporation into existing quality workflows. Contact Metav Werkzeuge in Emmerich for tailored supply and technical advice on Metav IndustryLine gauge pins: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M323.818 SKU: M323.818 GTIN: 4061905061066 Material: Special steel Weight: 0.025 kg Facts Diameter: 8.18 mm Tolerance: ±0.001 mm Length: 50 mm Special features Single test pin Workshop version Intended for end‑dimension checks FAQ What tolerance does the gauge pin offer? The gauge pin M323.818 is specified at ±0.001 mm (1 µm), providing a high level of dimensional precision for reference and inspection tasks. Is this pin supplied as a single item or part of a set? This entry describes a single test pin (M323.818) supplied individually for flexible use in inspection and fixture setups. What material is the pin made from and what does that mean for use? The pin is manufactured from special steel, chosen to balance hardness and resistance to wear for repeated workshop use while maintaining dimensional stability. For which applications is this gauge pin intended? The pin is intended for end‑dimension verification, reference measurements and integration into inspection procedures where a precise nominal diameter of 8.18 mm is required. Can the pin be used to set up inspection fixtures and master references? Yes, the compact 50 mm length and tight tolerance make the pin suitable as a reference element when configuring fixtures or checking bores against a known datum. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.19mm Gauge Pin ±0.001 mm Length 50 mm Workshop Finish - Metav IndustryLine
A workshop-grade gauge pin that combines ±0.001 mm accuracy with a compact 8.19 mm diameter and a 50 mm usable length for reproducible fit and end‑measure checks; supplied in a protective transport case for secure storage and handling. Order the M323.819 gauge pin directly via Metav Werkzeuge or ask our consultants if further technical data are required. M323.819 gauge pin (single) — 8.19 mm, ±0.001 mm tolerance The M323.819 gauge pin (single) is a workshop‑grade precision pin for end‑measure inspection and go/no‑go fit checks in metrology and quality control environments. Workshop-grade precision test pin Diameter 8.19 mm with ±0.001 mm tolerance 50 mm hardened special-steel length Supplied in protective transport case Measurable accuracy that reduces rework and rejects The core advantage of this gauge pin is its ±0.001 mm accuracy, which delivers a clear, measurable basis for pass/fail decisions during final inspection. With a defined 8.19 mm diameter and laboratory‑grade tolerance, the pin permits repeatable dimensional verification that reduces uncertainty in assembly and avoids costly rework. The numerical specification offers a straightforward comparison against drawing tolerances and machine capability figures, enabling rational decisions in incoming inspection and process control. Robust design built for frequent workshop use Designed as a workshop‑grade tool, the pin is manufactured from special steel, which provides the surface hardness and wear resistance required for repeated insertion and extraction in jigs and fixtures. The 50 mm length gives enough engagement for stable seating while remaining compact for handheld handling or fixture mounting. The modest mass and solid construction minimise deformation during use, so the component retains its geometric integrity across many inspection cycles — an important consideration for throughput in production environments. Integrates simply into existing inspection workflows As a single‑piece gauge, the pin is suitable for quick go/no‑go checks, alignment templates and end‑measure verification. The clear numeric specification and compact form factor mean it can be used alongside bench fixtures, plug gauges and optical comparators without special adaption. Traceable identification via the SKU and GTIN facilitates inventory control and replacement planning, while the transport packaging protects the surface finish during storage and transport. Practical handling, storage and documentation benefits Delivery includes a protective transport case, which supports safe storage and reduces the risk of accidental surface damage that would affect measurement accuracy. The pin’s compact geometry and clear tolerance marking simplify documentation in inspection reports and parts lists. Combined with Metav’s supply chain and product support, the gauge pin forms part of a practical toolkit for workshops and quality departments aiming for consistent final checks and reduced production variance. Choose the workshop‑grade precision of the Metav IndustryLine M323.819 gauge pin for reliable end‑measure verification — contact Metav Werkzeuge for supply and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.819 GTIN: 4061905061585 Label: Prüfstift, einzeln, 8,19mm, +/- 0.001 mm Länge 50 mm SKU: M323.819 Facts Diameter: 8.19 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.025 kg Special features Material: special steel Workshop version Supplied in protective transport case Accuracy: ±0.001 mm Category: gauge pins FAQ What inspection tasks is this gauge pin suited for? The M323.819 gauge pin is intended for end‑measure checks, fit and clearance verification, and simple go/no‑go seating tests in workshop and quality‑control routines. Is the material resistant to regular use in a production environment? Yes, the pin is manufactured from special steel and the M323.819 is supplied in a protective transport case to preserve the surface and dimensional integrity during repeated handling. Can the pin be used in fixtures and jigs? The compact 8.19 mm diameter and 50 mm length make the M323.819 suitable for mounting in inspection fixtures, templates and alignment tools without custom modification. How does the ±0.001 mm tolerance affect process control? A tolerance of ±0.001 mm provides a high level of resolution for final assembly checks, enabling clearer decisions on part conformity and helping to reduce downstream rework. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.1mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from the combination of ultra‑fine tolerance ±0.001 mm, a nominal diameter of 8.10 mm and a robust 50 mm length to secure repeatable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for integration into inspection routines. Gauge pin M323.810 — single 8.10 mm, ±0.001 mm, 50 mm (Metav IndustryLine) Gauge pin M323.810 for dimensional verification in workshop and quality‑control environments, designed as a single precision inspection pin with a nominal diameter of 8.10 mm and a tolerance of ±0.001 mm Single precision gauge pin 8.10 mm ±0.001 50 mm length, workshop execution Supplied in transport case for protection Precision that reduces rework and inspection time The inspection pin delivers industrial‑grade dimensional certainty with a nominal diameter of 8.10 mm and a tolerance of ±0.001 mm, suitable for verifying bore sizes, end‑dimensions and assembly fits. Manufactured from special steel, the pin combines wear resistance with stable geometry so that routine checks remain consistent over time. The narrow tolerance cuts uncertainty in quality control, enabling faster decision making on pass/fail checks and reducing downstream rework. Durable design for demanding workshop use Engineered as a workshop execution component, the pin offers mechanical resilience for repeated handling on the shop floor. The 50 mm length provides a stable engagement depth for most common verification tasks while the compact mass (approx. 0.025 kg) minimises handling fatigue during batch checks. Supplied in a protective transport case, the item remains protected in storage and transit, preserving the surface finish and the specified tolerance for each inspection cycle. Practical integration and traceable identification The single gauge pin is a straightforward addition to inspection kits and can be paired with existing plug gauge sets or dimensional fixtures for quick verification workflows. Clear identification with SKU and GTIN supports inventory tracking and process documentation; the robust geometry means fewer replacements and a predictable service life, which in turn contributes to a lower total cost of inspection ownership for the workshop. For reliable shop‑floor measurements and simple integration into inspection routines, request the Metav IndustryLine gauge pin M323.810 from Metav Werkzeuge — our technical advisors are available to recommend the right configuration for existing gauges and fixtures Technical data Article number: M323.810 GTIN: 4061905060502 Manufacturer: Metav IndustryLine Facts Diameter: 8.10 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.025 kg Special features Material: Special steel Workshop execution Supplied in transport case FAQ What is the intended use of this inspection pin? This gauge pin is intended for dimensional verification tasks such as bore checks and end‑dimension inspection; the M323.810 is suitable for routine workshop and quality‑control applications. Is the tolerance suitable for precision assembly checks? The specified tolerance of ±0.001 mm makes the inspection pin appropriate for high‑precision verification where micrometric conformity is required. How is the item delivered and protected during transport? The pin is supplied in a protective transport case to preserve the surface and maintain dimensional integrity during storage and shipping. Which material is used for the pin and why is it beneficial? The pin is made from special steel, chosen for its wear resistance and capacity to maintain stable geometry under repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.21mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of high repeatability and compact handling: the combination of 8.21 mm diameter, ±0.001 mm tolerance and a 50 mm length ensures reliable end-dimension verification with low measurement uncertainty; ideal for final checks in production and inspection. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.821 — precision gauge pin, 8.21 mm ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.821 is a workshop-grade precision plug intended for final-dimension and end‑mass checks in metrology and production environments Diameter 8.21 mm, tolerance ±0.001 mm Length 50 mm for compact measurements Made from special steel, workshop grade Consistent precision for final inspections A tolerance of ±0.001 mm positions this gauge pin in the high‑precision segment used for critical end‑dimension checks. The tight tolerance reduces uncertainty in pass/fail decisions, which in turn lowers rework rates and increases throughput in inspection stations. By using a fixed-diameter reference of 8.21 mm, traceable checks on bores, seats and mating parts become repeatable and quick to execute, supporting lean quality processes and faster cycle times. Durable workshop design for dependable handling Constructed from special steel and specified as a workshop-grade item, the pin delivers wear resistance and stable geometry under routine use. The 50 mm length provides a compact grip area and sufficient engagement for short-seat or through-bore verification, while the low mass supports easy handling during repetitive tests. The robust finish minimises the need for frequent replacement, making the component a practical choice where reliability and uptime matter. Seamless fit into inspection workflows Equipped with a clear identification (SKU M323.821) and industry-standard data for procurement, the pin integrates into existing quality routines without extra adaptation. Its compact form factor simplifies storage and pick‑and‑place handling at measuring benches or inspection fixtures, and its repeatability supports statistical process control activities. Metav’s supply chain and quality filter in Emmerich ensure consistent availability and compatibility with workshop inventories, enabling organisations to democratise precision across multiple workstations. Contact Metav Werkzeuge for application-specific advice or to secure the Metav IndustryLine gauge pin M323.821 for immediate inclusion in inspection kits Technical details Article number: M323.821 GTIN: 4061905061608 SKU: M323.821 Manufacturer: Metav IndustryLine Measured values Nominal diameter: 8.21 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.025 kg Features Material: Special steel Workshop version GTIN assigned FAQ What level of accuracy does this pin provide? The gauge pin delivers an accuracy of ±0.001 mm, suitable for high‑precision end‑dimension checks with visibly reduced measurement uncertainty. Can the pin be used for bore verification and plug‑gauge tasks? Yes. The 8.21 mm diameter and 50 mm length make the pin well suited for bore verification, seat checks and similar plug‑gauge applications. What is the material and how does it affect durability? Made from special steel, the pin offers enhanced wear resistance and dimensional stability under normal workshop use. How is the product identified for procurement? The item is listed as SKU M323.821 with GTIN 4061905061608 for straightforward ordering and inventory management. Is this gauge pin supplied with calibration? Calibration is not specified here; the product is supplied as a precision workshop component. For calibrated delivery options, please consult Metav Werkzeuge for available certificates and services. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.22mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial accuracy, compact workshop design and proven material quality for repeatable end‑measurements; order the test pin directly via Metav Werkzeuge or consult our specialists for application support. M323.822 Test Pin (8.22 mm) — Metav IndustryLine, ±0.001 mm tolerance M323.822 is a precision test pin designed for end‑measurements and inspection tasks in workshop environments, offering high dimensional stability and a compact 50 mm length for tight fixtures. Diameter 8.22 mm with ±0.001 mm tolerance Workshop version with robust construction Manufactured from special steel for wear resistance Compact 50 mm length for confined assemblies Precision that prevents rework and speeds inspection The M323.822 gauge pin is built for repeatable metrology where tolerances decide accept or reject. With a declared accuracy of ±0.001 mm and a nominal diameter of 8.22 mm, the pin provides a measurable improvement in process certainty compared with coarse gauges. The tight tolerance reduces unnecessary rework by minimising measurement uncertainty; operators and quality teams benefit from quicker decisions at inspection stations and fewer downstream rejects. The combination of dimensional consistency and compact form makes this probe an efficient component for fixture checks and pass/fail evaluations. Workshop‑proven material and handling benefits Constructed from special steel in a workshop version, this single unit is intended to withstand daily handling and occasional knocks without rapid wear. The 50 mm length keeps the centre of mass low for stable insertion and retrieval in confined setups, while the solid material reduces the risk of deformation under typical contact forces. For maintenance and longevity, the material choice ensures consistent surface hardness and corrosion resistance within standard workshop environments, giving a reliable reference length for repetitive measurement tasks and inspection routines. Versatile use across inspection and assembly workflows As an individual test pin, this component integrates easily into inspection benches, go/no‑go fixtures and measuring jigs for end dimensions. The compact profile and precision diameter suit alignment, bores inspection and calibration of small assemblies where spatial constraints apply. Using this gauge pin can streamline quality control by standardising the measurement step in assembly sequences, cutting cycle time and supporting traceable measurement procedures in production. The product’s GTIN and SKU facilitate inventory management and reordering within existing procurement systems. Contact Metav Werkzeuge for specification matching and to arrange supply of the Metav IndustryLine M323.822 test pin for precision inspection tasks Technical data Article number: M323.822 GTIN: 4061905061615 SKU: M323.822 Label: Prüfstift, einzeln, 8,22mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 8.22 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.025 kg Special features Material: special steel Version: workshop execution Unit: single test pin Category: Test pins (Messstifte) FAQ What tolerance can be expected from this test pin? The M323.822 test pin is specified with an accuracy of ±0.001 mm, providing the fine resolution required for tight end‑measurements. Is the material suitable for regular workshop use? Yes, the pin is made from special steel and supplied in a workshop‑rated execution intended for frequent handling and inspection tasks. Can this pin be used for bore alignment and go/no‑go checks? The compact 50 mm length and precise 8.22 mm diameter make it suitable for bore alignment, go/no‑go checks and small‑assembly inspection fixtures. How is this item identified for procurement and stock control? This test pin is listed under SKU M323.822 and GTIN 4061905061615 for straightforward ordering and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.23mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of high-precision measuring capability and robust workshop construction to reduce scrap and speed up inspection tasks; the compact 8.23 mm diameter with ±0.001 mm tolerance and a 50 mm gauge length deliver consistent end-measurements — order the gauge pin directly via Metav Werkzeuge or contact our consultants for procurement advice Metav IndustryLine Gauge Pin M323.823 — 8.23 mm, ±0.001 mm, 50 mm length A Metav IndustryLine gauge pin designed for precise end-measurements and quick workshop verification of bores and fits Workshop-grade construction Diameter 8.23 mm, tolerance ±0.001 mm 50 mm length for end-measurements Special steel for daily use Accuracy that reduces rework and keeps production moving The gauge pin provides a ±0.001 mm tolerance, making it suitable for tasks where small deviations have immediate effects on assembly and function. With a compact 8.23 mm diameter and a 50 mm measuring length, the pin offers repeatable results when checking end dimensions or verifying bore fits. This level of precision minimises rework, shortens inspection cycles and supports a more efficient quality loop in the workshop. Technical terms such as tolerance and gauge length are used here to describe measurable properties that directly translate into fewer rejects and more predictable downstream processes. Robust design for everyday inspection tasks Manufactured from special steel, the component is finished for workshop use and engineered to withstand frequent handling. The simple, single-piece construction ensures low set-up time for handheld checks or fixture-based inspections. Its light mass (0.025 kg) and compact form make positioning straightforward while maintaining stiffness where it matters, so the measurement remains stable even during repetitive checking. For inspection teams that perform fast pass/fail checks, this reliability in construction translates into consistent decision-making at the bench or on the shop floor. Traceable sourcing and seamless procurement Identified as SKU M323.823, the gauge pin is listed under metrological consumables and is compatible with standard plug gauges and comparison routines. A clear GTIN entry supports inventory management and reordering. Sourcing via an established partner provides certainty about material origin and batch consistency, which helps purchasing and quality departments maintain traceability and documentation. Metav’s position as a precision partner brings workshop-level access to calibrated and reliable measuring tools, supporting uninterrupted production and dependable inspection results. Contact Metav Werkzeuge for procurement advice or to discuss suitability for specific inspection procedures — call +49 2822 7131930 or email info@metav-werkzeuge.com for fast, expert support from Emmerich Technical data SKU: M323.823 GTIN: 4061905061622 Manufacturer: Metav IndustryLine Facts Diameter: 8.23 mm Accuracy: ±0.001 mm Length: 50 mm Weight: 0.025 kg Special features Material: special steel Application: end measurements Designation: single gauge pin Category: Messstifte FAQ What tolerance can be expected from this gauge pin? The gauge pin is specified at ±0.001 mm, which ensures tight repeatability for end-measurements and precision checks. Is this pin suitable for everyday workshop use? Yes, the workshop-grade construction and special steel make the pin suitable for frequent inspection tasks in production and assembly environments. How is the product identified for reordering? The item is listed as SKU M323.823 and the GTIN 4061905061622 assists in catalogue and inventory systems for straightforward reordering. Can this gauge pin be used to check bore fits and end-wall dimensions? The 8.23 mm diameter and 50 mm length are optimised for end-measurements and verification of bore fits where a precise reference mandrel is required. Who supplies this gauge pin and where is support available? Metav IndustryLine supplies the gauge pin; procurement and technical enquiries are handled by Metav Werkzeuge in Emmerich for European customers. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.24mm Test Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of micron‑level accuracy and robust workshop construction to secure reliable reference checks and reduce rework in inspection routines; delivered in a protective case for safe transport. Order the M323.824 gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.824 Gauge pin — 8.24 mm, ±0.001 mm accuracy, 50 mm length (Metav IndustryLine) The M323.824 gauge pin is a single precision pin designed for end‑measurements, reference checks and bore verification in workshop inspection environments. Workshop version for robust use Diameter precision 8.24 mm, ±0.001 mm Length 50 mm for deep reference measurements Delivered in protective transport case Micron‑level reference for consistent quality control The M323.824 is manufactured with an accuracy of ±0.001 mm, equivalent to one micrometre, which positions it as a high‑precision reference for dimensional checks. A diameter of 8.24 mm combined with a 50 mm overall length provides a stable contact area for bore and hole verification, enabling reproducible results when setting fixtures or verifying finished components. The fine tolerance reduces uncertainty in pass/fail assessments and supports tighter process control in serial production. Designed to withstand workshop conditions while preserving precision Built as a workshop version, the pin combines a compact design with durable special steel construction to resist wear during everyday use. The material choice balances surface hardness and dimensional stability so that the accuracy is preserved over multiple handling cycles. Delivered in a protective transport case, the item arrives ready for storage and safe transport between job stations, reducing the risk of damage that can impair repeatability. Practical integration into inspection and setup workflows As a single gauge pin, this measuring element is ideal for use as a setting or reference tool during machine set‑up, tool alignment and quick in‑process checks. Its compact form factor and mass (approx. 0.025 kg) make handling straightforward while enabling precise seating in bores and seats. Incorporating this precision pin into routine checks shortens decision times and supports clearer go/no‑go assessments, which in turn helps to lower scrap rates and rework costs. Contact Metav Werkzeuge for specific application advice and secure the M323.824 gauge pin for dependable micron‑level verification directly from our Emmerich distribution centre. Technical Data Article number: M323.824 GTIN: 4061905061639 Brand: Metav IndustryLine Facts Diameter: 8.24 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.025 kg Special features Material: Special steel Workshop version Delivered in protective transport case Category: Gauge pins (Messstifte) FAQ What level of accuracy does this gauge pin provide? The M323.824 gauge pin from Metav IndustryLine offers an accuracy of ±0.001 mm, suitable for high‑precision reference and verification tasks. Can the pin be used for bore and hole verification? Yes, the 8.24 mm diameter and 50 mm length make the pin suitable for bore, seat and end‑face checks in workshop inspection routines. What material is the measuring pin made of? The pin is made from special steel, chosen to combine dimensional stability with wear resistance for repeated use. Is the gauge pin supplied ready for storage and transport? The M323.824 is delivered in a protective transport case, which helps to protect the precision surface during handling and transport. Which applications are typical for this single gauge pin? Typical uses include fixture set‑up, quick in‑process checks, alignment tasks and any inspection requiring a precise reference pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.25mm Gauge Pin ±0.001 mm Length 50 mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, a compact 8.25 mm diameter and a workshop‑grade design for dependable end‑dimension verification; order the gauge pin via Metav Werkzeuge or contact their consultants for specification support. Gauge pin M323.825 by Metav IndustryLine — 8.25 mm, ±0.001 mm Gauge pin M323.825 is a single test pin designed for precise end‑dimension checks and compact measuring tasks in workshop environments Workshop version for robust use Diameter 8.25 mm with ±0.001 mm accuracy Length 50 mm for compact measuring tasks Supplied in protective case for transport Reliable sub‑millimetre precision for end‑dimension checks The M323.825 gauge pin delivers a rated tolerance of ±0.001 mm, making it suitable where repeatable, sub‑micrometre accuracy is required for final dimensional verification. The tight tolerance reduces uncertainty in go/no‑go checks and comparative measurements; when used in plug gauges or fixture checks the 8.25 mm diameter provides a stable reference that minimises eccentricity effects. The combination of a small form factor and high precision supports efficient inline inspections, shortening decision loops and improving first‑pass yield. Robust workshop design that withstands daily handling Designed as a workshop version, the pin is manufactured from special steel, a choice that balances wear resistance with dimensional stability under frequent use. With a nominal length of 50 mm and a mass of 0.025 kg, the part is easy to handle and integrates well into jigs, modular fixtures or manual inspection benches. The compact geometry reduces bending moment during measurement, which helps maintain the declared tolerance in repetitive checks and supports consistent results across production shifts. Compact handling and safe transport for small‑part inspection Classified for micro applications as an extremely compact gauge, the pin is ideal for end‑dimension verification of small bores, dowels and turned components where space is limited. Delivery in a protective case safeguards the measuring surface during transport and storage, preserving accuracy and reducing rework from contamination or accidental damage. The item supports fast inspection routines and is suitable for adoption in both maintenance benches and small series production lines, contributing to steady process control and fewer stoppages. For integration advice or to specify the Metav IndustryLine gauge pin M323.825 for your inspection process, contact Metav Werkzeuge to ensure the correct fixture and handling procedures are applied. Technical Data SKU: M323.825 GTIN: 4061905061646 Description: Test pin, single, 8.25 mm, ±0.001 mm, length 50 mm Weight: 0.025 kg Dimensions & accuracy Diameter: 8.25 mm Length: 50 mm Tolerance: ±0.001 mm Special features Material: Special steel Workshop version Supplied in protective case for transport FAQ What tolerance does the gauge pin offer? The gauge pin M323.825 is specified with a tolerance of ±0.001 mm for high‑precision end‑dimension checks. What material is used for the pin? The test pin is made from special steel, chosen for wear resistance and dimensional stability in workshop conditions. For which applications is this pin suitable? This compact, micro‑class pin is intended for end‑dimension verification of small bores, dowels and turned parts in production and quality inspection. Is the pin supplied ready for transport and storage? Yes. The M323.825 is supplied in a protective case to reduce the risk of damage during transport and storage. What are the exact dimensions and the SKU for ordering? Diameter 8.25 mm, length 50 mm, weight 0.025 kg; SKU M323.825 is used for ordering and identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.26mm Gauge Pin ±0.001mm Length 50mm, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of ultra‑fine accuracy, workshop‑proven materials and compact handling for reliable end‑dimension checks and fewer rework cycles. Order the gauge pin directly via Metav Werkzeuge or ask the consultants for application advice. Gauge pin M323.826 — 8.26 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) A gauge pin M323.826 designed for precise end‑dimension verification in workshop and inspection workflows High‑precision ±0.001 mm tolerance Diameter 8.26 mm ground to fit 50 mm working length for fixture checks Workshop‑grade special steel with transport case Precision where one micrometre matters This inspection pin delivers an accuracy of ±0.001 mm, equivalent to one micrometre, which places it in the realm of fine metrological control rather than routine gauging. Such tolerance is suitable for end‑dimension verification where component fits and clearances determine assembly quality. The 8.26 mm diameter is ground and honed for concentricity, helping to reduce measurement scatter and minimise downstream rework. The result is faster process validation and fewer rejected parts during quality control. Robust workshop design for repeatable checks Manufactured in a workshop version and made from special steel, the pin balances wear resistance with machinability for regular use at the bench. Its 50 mm length provides sufficient reach for many fixture and bore checks while remaining compact for handheld inspection. At 0.025 kg the instrument is light enough for single‑operator handling yet stiff enough to avoid flicker during fits. Supplied in a protective transport case, the pin is protected in transit and storage, ensuring the measurement surface remains pristine. Practical handling and application notes The instrument functions as a precision reference for end‑measure checks, press‑fits and gauging inserts in jigs and fixtures. Gentle handling and clean measurement surfaces maintain the specified tolerance; avoid knocks and contamination to preserve the ground finish. The compact format makes the pin suitable for integration into inspection routines and as a reference master when setting up plug gauges or comparative checks. Its geometry supports consistent seating in bore centres for comparable results across repeated measurements. Identification, traceability and workshop benefits The product is identified by the GTIN and SKU to support inventory and traceability in procurement systems, and the compact design reduces storage space while increasing practical availability at the bench. As part of Metav IndustryLine, this pin complements a wider assortment of inspection aids that simplify procurement and consolidate quality standards. Choosing workshop‑grade components from a focused supplier reduces supplier complexity and supports predictable delivery into production. For reliable end‑dimension verification with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for a product recommendation or technical clarification at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.826 GTIN: 4061905061653 Brand: Metav IndustryLine Core dimensions Diameter: 8.26 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.025 kg Materials & features Material: Special steel Workshop execution Supplied in a transport case Intended use: End‑dimension checks FAQ What tolerance class does the gauge pin meet? The gauge pin is specified with a tolerance of ±0.001 mm, providing micrometre‑level control for end‑dimension verification. Is the pin suitable for repeated use in a workshop environment? Yes, the M323.826 is a workshop‑grade pin made from special steel and supplied in a transport case to protect the measurement surface during regular handling. What dimensions are available for this reference pin? This item is produced with an 8.26 mm diameter and a 50 mm length, as stated in the product identification. How should the measuring surface be maintained? Keep the pin clean and free of lubricants or grit; avoid impact and store it in the supplied transport case to preserve the ground finish and specified tolerance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.27mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Finish - Metav IndustryLine
Combine workshop-grade robustness, sub‑micron tolerance and a compact 50 mm length for reproducible end‑measurement work. Order the gauge pin directly via Metav Werkzeuge or consult the Metav specialists for application advice and delivery options. Gauge pin, single 8.27 mm (M323.827) — workshop test pin with ±0.001 mm accuracy, 50 mm length Gauge pin, single 8.27 mm (M323.827) is a compact inspection pin intended for precise end‑measurements and dimensional checks in workshop environments Workshop execution, robust design Tolerance ±0.001 mm Diameter 8.27 mm precision Length 50 mm for short‑reach checks Precision that supports faster inspection decisions The M323.827 gauge pin delivers a ±0.001 mm specification that translates into reliable repeatability for pass/fail checks and reference measurements. A tight nominal diameter of 8.27 mm reduces uncertainty in fit and clearance verification, so inspection cycles become more deterministic. The short 50 mm length keeps the pin rigid under manual handling, which minimises bending error and supports consistent contact during measurement. In practical terms, the combination of small form factor and fine tolerance reduces rework and speeds up throughput in small‑batch production or incoming inspection. Designed for workshop use and robust handling Constructed in special steel and labelled as a workshop execution, this single test pin tolerates the mechanical demands of everyday shop floor inspection. The compact geometry is suited to quick reference checks in fixtures, gauges and assembly trials, offering a balance between stiffness and manoeuvrability. Where tight fits must be checked repeatedly, the robust material and controlled manufacturing tolerances reduce surface wear and sustain dimensional integrity over many cycles, supporting long service life and predictable measurement outcomes. Practical integration into quality routines As a dedicated inspection element, the single gauge pin serves as a fixed reference for end‑measurement tasks and comparative checks within quality control processes. The straightforward geometry allows easy insertion into bores or mating features and quick recording of deviations against nominal values. For purchasing and logistics, Metav IndustryLine supplies this item with clear identification (M323.827) from the Emmerich distribution centre, which supports steady replenishment for production and test environments. The provenance and controlled supply chain contribute to traceable inventory management and predictable lead times. For workshop‑grade end‑measurement with Metav IndustryLine’s M323.827 gauge pin, contact Metav Werkzeuge in Emmerich for tailored advice and a delivery proposal Technical data Article number: M323.827 GTIN: 4061905061660 Brand: Metav IndustryLine Label: Gauge pin, single, 8.27 mm, ±0.001 mm, length 50 mm Facts Diameter: 8.27 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.025 kg Special features Material: Special steel Version: Workshop execution Single gauge pin for end measurements Application: dimensional inspection and reference measurements FAQ What is the dimensional tolerance of this gauge pin? The M323.827 gauge pin (Metav IndustryLine) is specified with a tolerance of ±0.001 mm, suitable for high‑precision end‑measurement tasks. Which nominal diameter does the pin have? The inspection pin has a nominal diameter of 8.27 mm and is manufactured to tight tolerance for repeatable fit checks. Is the pin suitable for routine workshop inspection? Designed as a workshop execution item, the gauge pin is intended for regular use in shop floor and inspection settings where compact, rigid reference elements are required. What applications are typical for this single gauge pin? Common uses include end‑measurement of bores and shafts, reference checks in fixtures and quick go/no‑go verification in assembly and incoming inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.28mm Test Pin ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Confident measurements are delivered by combining ±0.001 mm tolerance with a robust 8.28 mm diameter and a practical 50 mm working length, supporting reliable end‑measure and fit checks in production. Order the M323.828 gauge pin directly via Metav Werkzeuge or consult the specialists if application advice is required. M323.828 gauge pin — 8.28 mm, ±0.001 mm accuracy (Metav IndustryLine) The M323.828 gauge pin is a single precision plug designed for end‑measurement, fit checking and fine‑mechanical inspection tasks in workshop environments. Precision tolerance ±0.001 mm 8.28 mm hardened gauge diameter 50 mm working length Workshop‑grade special steel Secure tolerances for critical assemblies High repeatability is achieved through the ±0.001 mm tolerance, which minimises measurement uncertainty and reduces the risk of assembly rework. This degree of precision is suited to quality control steps where small deviations can cascade into costly downstream errors; the narrow tolerance makes the gauge pin a reliable reference for pass/fail checks and for setting up jigs or fixtures. By using a hardened, stable measuring element the process time for verification is shortened, supporting faster production cycles with consistent results. Compact format that enhances handling in fine work With an 8.28 mm diameter and a 50 mm working length the component sits in the micro measurement category (max 10–100 mm), offering an excellent stiffness‑to‑size ratio for fine‑mechanical and watchmaking tasks. The compact profile keeps the measuring element rigid under light loading and simplifies positioning in confined bores or small assemblies. Low mass and a concise working length also ease manual handling and integration into dedicated inspection aids, improving ergonomics during repetitive checks. Robust construction for everyday workshop use Made from special steel and released as a workshop version, the gauge pin is engineered to withstand routine handling and light contact with mating parts while maintaining dimensional integrity. The material choice provides resistance against wear in daily inspection tasks and ensures a stable reference surface for go/no‑go assessments. Supplied as a single test pin, the component is ideal for replacement when sets are customised or when a dedicated pin is required for a specific bore size. For specialist advice on integrating the Metav IndustryLine M323.828 gauge pin into quality control routines, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.828 GTIN: 4061905061677 Diameter: 8.28 mm Tolerance: ±0.001 mm Length: 50 mm Material: Special steel Weight: 0.025 kg ECLASS: 21170231 Facts Diameter (numeric): 8.28 mm Length (numeric): 50 mm Tolerance (numeric): ±0.001 mm Weight (numeric): 0.025 kg Special features Single test pin supplied individually Workshop version for routine inspection Intended for end measurements and fit checks Category: gauge pins (messstifte) FAQ What accuracy does this gauge pin provide? The M323.828 gauge pin from Metav IndustryLine offers a tolerance of ±0.001 mm, suitable for high‑precision end‑measure and fit verification tasks. Which measurement tasks is this pin intended for? Designed for end measurements, fit checks and alignment tasks on small bores and precision components, the pin supports fine‑mechanical inspection and setting operations. What material is used and how durable is the pin? Manufactured from special steel, the workshop version combines surface hardness with resistance to routine handling, delivering stable reference surfaces during frequent checks. How does the 8.28 mm size influence application? At 8.28 mm the pin falls into the micro range (10–100 mm category), offering excellent rigidity and minimal flex for repeatable measurements in compact components. Is this a single item or part of a set? The product is supplied as a single test pin (SKU M323.828), allowing individual use in jigs or as replacement elements within custom inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.29mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-ready robustness, micrometre-level accuracy and compact handling for reliable end‑measure checks. The M323.829 gauge pin delivers Ø 8.29 mm with a tolerance of ±0.001 mm and a 50 mm shaft, supplied in a protective transport case; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.829 — Single precision verification pin, Ø 8.29 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.829 is a single high‑precision verification pin intended for end‑measure checks and fixture verification in workshop and production environments. Single precision pin Ø 8.29 mm ±0.001 mm 50 mm length in special steel Workshop version for robust daily use Supplied in protective transport case Reduce downtime with reproducible precision The extremely tight tolerance of ±0.001 mm places this verification pin in a class where repeatability matters. Used as an end‑measure standard, the pin provides a clear reference for bore checks, alignment operations and assembly gauges, which reduces rework and speeds up inspection cycles. Because the diameter is specified as Ø 8.29 mm, interchangeability between fixtures and measurement stands is immediate; the consistent geometry eliminates guesswork during set‑up and shortens machine downtime. The emphasis here is on measurable benefits: fewer scrap parts, faster quality decisions and smoother production flow. Built for workshop use and safe transport Constructed from special steel and finished as a workshop version, the pin is optimised for daily handling and mechanical resilience. The 50 mm shaft length offers enough engagement for most verification tasks while remaining easy to position by hand or in fixture blocks. Delivery in a protective transport case preserves the calibrated surface during storage and transfer, keeping the reference geometry intact. This practical packaging supports on‑shop logistics: inspection tools stay protected between jobs and are ready for immediate use when required. Traceability and integration into quality routines As a single verification element, the pin is suitable for integration into modular inspection routines and assembly jigs. The solid specification and single‑piece supply make it straightforward to document traceability within a quality system, supporting serial checks and process validation. The compact form factor allows straightforward incorporation into existing gauge plates or bespoke test fixtures, while the clear technical specification simplifies procurement and inventory control. The robust construction and precise finish also mean reliable performance over repeated cycles, contributing to long‑term measurement stability. Contact Metav Werkzeuge today to request application guidance or to order the M323.829 workshop gauge pin with protective case directly from our Emmerich warehouse; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.829 GTIN: 4061905062414 Manufacturer: Metav IndustryLine Material: Special steel Finish: Workshop version Supplied in: Protective transport case Facts Diameter: 8.29 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.025 kg Special features Single verification/gauge pin Application: End‑measure checks, fixture verification Category: Gauge pins Packaging purpose: Transport protection FAQ What level of accuracy does this gauge pin provide? The M323.829 gauge pin is specified to ±0.001 mm, offering micrometre‑level accuracy suitable for verification and end‑measure tasks. Which materials is the pin made from and how does that help? This verification pin is produced from special steel, selected for dimensional stability and wear resistance to ensure long service life under workshop conditions. Is the pin supplied ready for use and how is it protected? The pin is supplied as a single item in a protective transport case to safeguard the calibrated surface during storage and transfer. Can the pin be used in fixture and jig assemblies? Yes — the 50 mm shaft and precise Ø 8.29 mm geometry make it suitable for integration into gauge plates, jigs and assembly fixtures for routine checks. Does the product support traceability in quality systems? The defined specification and single‑item supply of the M323.829 simplify documentation and traceability for quality control and process validation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.2mm Gauge Pin, ±0.001mm Tolerance, Length 50mm, Workshop Version, Special Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of ±0.001 mm tolerance, a compact Ø 8.20 mm reference diameter and a 50 mm length for repeatable end‑measure checks; order the item directly via Metav Werkzeuge or contact our consultants for application advice. Gauge Pin M323.820 — single precision pin, Ø 8.20 mm, ±0.001 mm The Gauge Pin M323.820 is a workshop‑grade precision pin for end‑dimension checks and fixture alignment in inspection and jig setups. Ø 8.20 mm with ±0.001 mm tolerance Length 50 mm for deep or recessed checks Special steel workshop version Reliable reference for repeatable inspection A compact reference pin with a ±0.001 mm tolerance provides a measurable step‑change in inspection certainty. By using a stable diameter of 8.20 mm, the component reduces ambiguous fits and streamlines go/no‑go verification; this leads to fewer reworks and faster setup times on production lines. The numerical tolerance is suitable where sub‑micrometre consistency is required for end‑dimension controls, improving overall process efficiency. Built for workshop handling and longevity Constructed from special steel and specified as a workshop‑grade design, the pin resists wear while maintaining geometry during everyday use. The 50 mm length allows access into slightly recessed features without compromising stability, so handling remains straightforward in busy inspection benches. Durability reduces replacement frequency and supports steady throughput in small‑batch and series production. Easy integration into metrology workflows Supplied as a single precision pin, the component fits common gauge sets and fixture pockets as a direct reference element. Traceable identification via SKU and GTIN simplifies inventory and quality records, supporting documentation of measurement standards. The sturdy form factor minimises operator influence on results and allows consistent use in routine checks, contributing to reliable measurement data across shifts. For application guidance or to secure consistent measurement outcomes with the M323.820, contact Metav Werkzeuge for tailored advice and order handling via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.820 GTIN: 4061905061592 Manufacturer: Metav IndustryLine Facts Diameter: 8.20 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.025 kg ECLASS: 21170231 Special features Material: Special steel Workshop execution Category: Gauge pins Supplied single (one piece) Intended use: end‑dimension measurements FAQ What tolerance does the pin offer and how precise is it? The pin is specified with a tolerance of ±0.001 mm, providing high‑precision reference performance suitable for fine end‑dimension inspections. Is the pin suitable for use in fixture alignment and go/no‑go checks? Yes — this workshop‑grade gauge pin is designed for end‑measure checks and alignment tasks where a stable reference diameter is required. Which material is used and what durability can be expected? Made from special steel, the pin delivers enhanced wear resistance for routine workshop use while maintaining geometric stability. Can the pin be integrated into existing gauge sets or fixtures? The compact Ø 8.20 mm diameter and 50 mm length make the pin compatible with typical gauge pockets and fixture designs used for end‑dimension verification. How is the product identified for documentation and inventory? Identification is provided via SKU M323.820 and GTIN 4061905061592, facilitating traceability and record keeping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.31mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, sub‑micron tolerance and compact length to secure reproducible reference measurements in routine inspection tasks; order or request advice directly via Metav Werkzeuge for fast delivery and application support. Test pin M323.831 — precision gauge pin, 8.31 mm, tolerance ±0.001 mm (Metav IndustryLine) A Test pin M323.831 manufactured for workshop inspection and reference measurements, ideal as a dimensional standard for gauges, fixtures and quick go/no‑go checks. Workshop-grade design for rugged use Diameter precisely 8.31 mm tolerance ±0.001 mm Length 50 mm for end-measurement applications Special steel construction for dimensional stability Accuracy that stabilises production control The pin offers an exceptional ±0.001 mm tolerance, placing it in the category of high‑precision reference pins for demanding inspection routines. Such a fine allowance corresponds to one micron and therefore permits repeatable comparison measurements against internal diameters, bores or mating parts where small deviations matter. Using a defined reference reduces measurement scatter and supports statistical process control, so inspection steps become reliable inputs for production decisions rather than approximate checks. Durability tailored to everyday workshop use Built in a workshop‑grade configuration from special steel, the pin withstands frequent handling while keeping dimensional fidelity. The combination of a compact 50 mm length and a carefully selected material minimises thermal distortions during short measuring cycles and reduces the risk of geometric change through knocks or abrasion. The resulting robustness ensures that the component maintains its role as a stable reference even in routine shop‑floor conditions, extending intervals between verification events. Practical integration into inspection and setup As a compact reference element, the pin is suitable for end‑measurement tasks, fixture setup and quick verification of bore sizes. The 8.31 mm diameter and 50 mm length make it convenient for insertion, tactile feel checks and use with bench comparators or optical devices where a defined, hard datum is required. Its narrow form factor eases access into recessed features and permits straightforward placement in gauge blocks or bespoke holders, speeding up both first‑article inspection and corrective alignment procedures. Procurement confidence and technical partnership Sourced under the Metav IndustryLine programme, the component benefits from a central European quality filter that assures traceable stock and consistent dimensional specification. Metav’s product range and logistics support reduce procurement complexity for workshops and small manufacturers, so precise measuring aids are available without lengthy supplier qualification. The focus on reliable supply and technical clarity helps integrate such reference pins into structured quality workflows with minimal administrative overhead. For rapid supply and tailored technical guidance on this high‑precision gauge pin, contact Metav Werkzeuge — Metav IndustryLine specialists will advise on suitability, handling and delivery. Technical data Article number: M323.831 GTIN: 4061905062438 Label: Prüfstift, einzeln, 8,31mm, +/- 0.001 mm Länge 50 mm Manufacturer: Metav IndustryLine Core specifications Diameter: 8.31 mm Length: 50 mm Tolerance/accuracy: ±0.001 mm Weight: 0.026 kg Features Workshop execution Material: Special steel Single test pin delivery ECLASS: 21170231 FAQ What inspection tasks is this pin suited for? The M323.831 test pin is suited for quick go/no‑go checks, reference measurements in fixtures and verification of internal diameters where a defined hard datum is required. Is the diameter tolerance suitable for precision engineering? Yes — the specified ±0.001 mm tolerance positions the pin for high‑precision inspection tasks commonly required in precision engineering and quality control. Can this pin be used with gauge blocks or fixtures? The compact 50 mm length and the precise 8.31 mm diameter make the pin compatible with gauge blocks, bespoke holders and fixture setups as a repeatable reference. How does material choice affect measurement stability? The special steel construction enhances dimensional stability under normal workshop conditions, reducing thermal and mechanical distortion during short measurement sequences. Who supplies and guarantees the specification of this product? Metav IndustryLine supplies the M323.831 test pin with traceable stock control and product specification assurance through Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.32mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Finish - Metav IndustryLine
Take advantage of workshop-grade durability and micrometric accuracy — the combination of ±0.001 mm tolerance and a 50 mm hardened length ensures repeatable verification and reliable go/no‑go checks; order via Metav Werkzeuge or consult our application experts for advice. Gauge pin M323.832 — 8.32 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A gauge pin M323.832 designed for precision end‑measure and fit verification in workshop and inspection tasks ±0.001 mm tolerance precision 8.32 mm nominal diameter 50 mm hardened length Workshop‑grade special steel finish Micrometric precision for repeatable fit checks The verification pin delivers ±0.001 mm concentricity and dimensional accuracy, making it suitable for critical go/no‑go evaluations and reference measurements in short run inspections. A nominal 8.32 mm diameter provides a defined reference for bore and dowel checks; the tight tolerance reduces uncertainty in assembly verification and supports consistent pass/fail decisions. This level of accuracy is a rational choice where traceable, repeatable results directly affect production yield and downstream assembly reliability. Robust construction for everyday workshop use Manufactured in special steel with a workshop execution finish, the pin combines dimensional stability with resistance to handling and machine contact. The 50 mm length offers a practical balance between engagement depth and stiffness, limiting bending during use while remaining easy to position. Delivered as a single, hardened item in a protective transport case, the component is ready for storage and safe transfer between bench and inspection station, supporting efficient workflow on the shop floor. Practical handling and integration into inspection routines The compact design and low mass support fast inspection cycles and simple manual handling; the verification pin is optimised for quick insertions and repeat checks. Its clear nominal size and high accuracy make it suitable as a reference tool in fixture validation, end‑of‑line controls and small‑batch dimensional audits. Backed by the Metav IndustryLine quality filter, the product aligns with workshop expectations for dependable supply and consistent manufacturing tolerances. For workshop procurement of Metav IndustryLine precision pins, contact Metav Werkzeuge for fast supply from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.832 GTIN: 4061905062445 Brand: Metav IndustryLine Category: Gauge pin Label: Prüfstift, einzeln, 8,32mm, +/- 0.001 mm Länge 50 mm Core specifications Diameter: 8.32 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.026 kg Materials and special features Material: Special steel Version: Workshop execution Delivery: Supplied single, in protective transport case SKU: M323.832 FAQ What level of dimensional accuracy does this verification pin provide? The gauge pin M323.832 is specified to ±0.001 mm, making it suitable for fine fit and end‑measure checks where micrometric accuracy is required. Which material is used for the pin and how does it affect durability? Made from special steel and supplied in a workshop execution, the pin offers increased resistance to wear and handling, ensuring stable dimensions over repeated use. Is the pin supplied ready for workshop storage and transport? Yes — the verification pin is delivered as a single item in a protective transport case to simplify storage and safe movement between workstations. Can this pin be used for both bore checking and dowel fit verification? The 8.32 mm nominal diameter and tight tolerance make the pin suitable for bore verification, dowel checks and other reference measurements requiring a precise cylindrical gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.33mm Gauge Pin, Single, ±0.001 mm Accuracy, 50mm Length, Workshop Finish - Metav IndustryLine
Take advantage of the precision and robustness of a workshop-grade gauge pin: exact 8.33 mm diameter with ±0.001 mm tolerance and a compact 50 mm length ensure repeatable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult the Metav team for tailored advice. M323.833 gauge pin — 8.33 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.833 gauge pin is a single workshop‑grade reference pin designed for precise end‑dimension inspection and fixture set‑up in production and inspection environments. 8.33 mm diameter with ±0.001 mm accuracy 50 mm hardened workshop length Manufactured from special steel Delivered in protective transport case Repeatable end-dimension verification for quality control A solid cylindrical reference element with ±0.001 mm tolerance provides a dependable baseline for inspection tasks and fixture alignment. The extremely tight tolerance reduces measurement uncertainty and supports faster go/no‑go decisions on the shop floor, which translates into fewer reworks and more consistent production output. By using a calibrated reference geometry, traceable checks and repeatable set‑ups become an integral part of regular quality routines. Robust design optimised for workshop handling Constructed from special steel in a workshop execution, this reference pin balances wear resistance with dimensional stability over repeated use. The 50 mm length offers enough engagement for many jigs and plug‑gauge applications while remaining compact for quick handling and insertion. Supplied in a protective transport case, the item is protected against impact and contamination during storage and transit, preserving its geometry between uses. Simple integration into gauges and fixtures The cylindrical form and standard diameter make the component straightforward to incorporate into existing inspection fixtures, plug‑gauge sets or alignment tools. As a single reference pin, it serves both as a go/no‑go reference and as a master for end‑dimension verification, supporting efficient in‑process checks and set‑up procedures without complex adapters. The compact mass also aids fast stabilisation during insertion for reliable contact measurement. Practical assurance for workshop precision Workshop practitioners benefit from a reference part that emphasises stability and reproducibility. Lightweight and easy to swap, the pin minimises downtime in inspection cycles and complements handheld and bench inspection routines. The Metav IndustryLine execution reflects a focus on accessible precision: consistent geometry, workshop suitability and protected delivery reduce the logistical and operational friction of maintaining measurement standards. Contact Metav Werkzeuge for advice on integrating the Metav IndustryLine M323.833 gauge pin into inspection routines or to request immediate supply: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: M323.833 GTIN: 4061905062452 Diameter: 8.33 mm Facts Length: 50 mm Tolerance: ±0.001 mm Weight: 0.026 kg Special features Material: special steel Workshop execution Delivered in protective transport case FAQ What tolerance does the gauge pin offer? The Metav IndustryLine M323.833 gauge pin delivers a tolerance of ±0.001 mm for precise end‑dimension verification. What is the intended application for this reference pin? Designed for end‑dimension inspection and fixture set‑up, the gauge pin is suitable for plug‑gauge tasks and as a reference in inspection jigs. What material is the pin made from? The pin is manufactured from special steel in a workshop execution to combine wear resistance with dimensional stability. Is the pin supplied ready for transport and storage? Yes, the gauge pin is delivered in a protective transport case to prevent damage and contamination during handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.34mm Gauge Pin, ±0.001mm Tolerance, 50mm Length, Workshop Version, Special Steel, Case Included - Metav IndustryLine
Take advantage of the combination of ultra‑fine tolerance and robust workshop construction to ensure reliable end‑measure checks and fewer rework cycles. Order the pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.834 Gauge pin — single precision 8.34 mm, ±0.001 mm (Metav IndustryLine) A M323.834 single gauge pin designed for precise end‑measurement and fit checks in workshop inspection and assembly routines High‑precision ±0.001 mm tolerance Nominal diameter 8.34 mm Length 50 mm for stable handling Workshop‑grade special steel construction Precision that secures measurement decisions The gauge pin offers an industry‑grade tolerance of ±0.001 mm, which makes it suitable for final dimension checks where decisive go/no‑go criteria are required. Manufactured for workshop use, the component removes doubt from tight fits and assembly controls by providing a direct physical reference for bore and shaft acceptance. The ultra‑fine tolerance reduces the need for secondary measurement steps and supports faster, evidence‑based decisions in production control. Robust construction for repeatable handling Constructed from special steel and specified at 50 mm length, the pin combines surface integrity with a handling form factor that eases repeated use on the inspection bench. The workshop execution prioritises wear resistance and dimensional stability so that periodic checks remain consistent over time. The compact mass also minimises thermal influence during short measurement cycles, preserving reproducibility between successive measurements. Integration into inspection workflows to save time As a single gauge pin for verification tasks, this tool fits directly into common inspection routines such as plug checks, assembly trials and fixture validation. Using a defined physical standard like this simplifies process documentation and reduces throughput time for routine acceptance tests. The traceable reference and simple geometry support rapid comparison methods and are compatible with standard pin blocks, holders and test benches used across mechanical workshops. Traceability and item identification for quality control Each item is identifiable by its SKU M323.834 and GTIN, aiding traceability within inventory and quality records. The clearly defined numerical data — diameter, length and stated tolerance — provides a verifiable basis for batch acceptance and calibration scheduling. When documented alongside inspection reports, the pin helps demonstrate conformance to internal quality plans and supports downstream decisions in assembly and supply chain checks. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating this precision gauge pin into inspection routines or to discuss procurement and delivery options Technical data SKU: M323.834 GTIN: 4061905062469 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 8,34mm, +/- 0.001 mm Länge 50 mm Material: Special steel Facts Diameter: 8.34 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.026 kg ECLASS: 21170231 Special features Workshop execution Single item delivery Designed for end‑measure and fit checks FAQ What accuracy can be expected from this gauge pin? The M323.834 gauge pin is specified to ±0.001 mm and is intended for precision end‑measure and go/no‑go checks where micrometric accuracy is required. Is the pin suitable for everyday workshop use? Yes, the workshop‑grade construction and 50 mm length make the pin robust enough for regular inspection tasks while maintaining repeatable results. Which materials is the pin suited to verify? The gauge pin itself is a hardened reference made from special steel and is used to check bores and shafts in a wide range of materials; it provides a physical reference independent of the workpiece material. How is the item identified for inventory and quality records? Identification is via SKU M323.834 and GTIN 4061905062469, which simplifies traceability in inspection and purchasing systems. Can this gauge pin be used with standard pin blocks and holders? The pin is manufactured to nominal dimensions and is compatible with common pin blocks, holders and bench fixtures used in mechanical workshops. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.35mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from ±0.001 mm repeatability and a compact 50 mm length for precise end‑measure checks; the robust special steel construction supports repeatable fixture setting and inspection. Order the gauge pin directly via Metav Werkzeuge or consult our specialists if tailored advice is required. Gauge pin M323.835 — single precision inspection pin, Ø 8.35 mm, ±0.001 mm Gauge pin M323.835 is a single precision inspection pin designed for exact end‑measure verification and fixture setting in workshop and quality‑control tasks. ±0.001 mm tolerance Diameter Ø 8.35 mm 50 mm length, workshop execution Special steel, precision ground Accuracy that protects production quality The core advantage is the ±0.001 mm tolerance (equivalent to 1 µm), which converts measurement uncertainty into a reliable decision criterion during inspection or set‑up. Such a tolerance reduces the risk of false rejects and prevents fitment issues downstream, because the inspection element provides a clearly defined reference. The compact precision pin is especially valuable where small deviations have high cost implications, offering a measurable improvement in process control and first‑pass yield. Compact shape for confined and repeatable measurements With a diameter of Ø 8.35 mm and a 50 mm overall length, this single pin is engineered for use in tight fixturing situations and confined bore checks. The short yet stiff geometry gives stable contact on faces and ends, enabling reproducible seating and minimising deflection during probing or manual verification. The workshop‑grade format supports rapid handling on the bench and straightforward integration into jigs without needing large holding fixtures. Durable construction for consistent references Manufactured from special steel and delivered in a workshop configuration, the pin is precision ground to maintain roundness and surface finish that are critical to repeatable measurements. The modest mass (0.026 kg) indicates a solid, single‑piece construction that resists wear under normal inspection routines. A durable reference like this reduces re‑calibration frequency and preserves instrumented tolerances over extended use. Practical role in inspection and setting workflows Designed as an inspection and setting element for end‑measure tasks, the pin supports quick go/no‑go checks, depth references and fixture alignment during assembly and quality control. The single‑piece delivery suits environments where individual reference gauges are allocated to specific stations or operators, ensuring traceable use and straightforward inventory handling. For applications requiring documented traceability or bespoke traceable sets, Metav Werkzeuge can advise on appropriate complements and handling procedures. Contact Metav Werkzeuge for expert guidance and to secure the Metav IndustryLine gauge pin M323.835 with ±0.001 mm accuracy for your inspection and fixture‑setting requirements. Technical data Article number: M323.835 GTIN: 4061905059780 Description: Gauge pin, single, 8.35 mm, ±0.001 mm, length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 8.35 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.026 kg Special features Material: special steel Workshop execution Single delivery Precision ground FAQ What accuracy can be expected from this gauge pin? The gauge pin M323.835 delivers an accuracy of ±0.001 mm (1 µm), suitable for high‑precision end‑measure verification and repeatable reference tasks. Is the pin suitable for fixture setting and small‑bore checks? Yes, the single precision pin is designed for fixture setting and confined bore or end checks; its Ø 8.35 mm diameter and 50 mm length offer a compact, stiff reference. Which material is used and how does it affect wear? The pin is made from special steel and is precision ground to provide a hard wearing surface that preserves roundness and repeatability under normal inspection use. Can this gauge pin be used as a calibration standard? The M323.835 functions as a stable reference in inspection workflows; for laboratory calibration certificates or traceable sets, Metav Werkzeuge can advise on suitable procedures and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.36mm Gauge Pin, Single, ±0.001mm Accuracy, Length 50mm, Workshop Version, Special Steel, Case Included - Metav IndustryLine
A compact precision reference that combines a tight ±0.001 mm tolerance with a true Ø 8.36 mm diameter and a 50 mm working length; designed as a robust workshop specification for repeatable end‑dimension checks. Benefit from special steel construction and a format suited to fixture set‑up and inspection tasks. Order the gauge pin directly via Metav Werkzeuge or consult their technical advisers for application guidance. Gauge pin M323.836 — single test pin, Ø 8.36 mm, ±0.001 mm The gauge pin M323.836 is a precision reference pin intended for end‑dimension verification and fixture set‑up in workshop metrology, offering reliable reference geometry for go/no‑go checks and component alignment. Tolerance ±0.001 mm Ø 8.36 mm, length 50 mm Made from special steel Workshop version for robust use Precision that supports consistent inspection results With a declared tolerance of ±0.001 mm, this reference pin provides a clearly defined dimensional standard that supports tighter inspection limits and reduced measurement uncertainty. The nominal diameter of Ø 8.36 mm and the 50 mm working length create a stable contact area for comparative checks, enabling quick verification of bore diameters, fixture fit and assembly interfaces. Using a dedicated reference pin of known geometry shortens inspection cycles and contributes directly to lower rework rates and improved process reliability. Built for repetitive workshop use Manufactured from special steel, the pin is specified for repeated handling in a workshop environment where contact wear and surface integrity matter. The workshop specification emphasises robustness without sacrificing dimensional fidelity, so the part retains a reliable reference form even after multiple uses. The compact form factor and solid construction make it suitable for integration into inspection benches, assembly jigs and manual gauging routines where a stable, long‑lasting reference tool is required. Practical for fixture set‑up and quality control As a single reference element, the pin simplifies set‑up tasks and supports comparative measurement strategies—useful when exact instruments are impractical for routine checks. The design reduces operator decision time during go/no‑go tests and helps standardise measurement points across shifts. Confidence in part acceptance grows when fixtures and gauges reference a precisely specified pin; traceable dimensional data and consistent hardware reduce ambiguity in quality records and speed up troubleshooting when deviations occur. Identification, handling and documentation The compact format eases storage and handling in busy inspection areas while the modest weight minimises accidental shock during use. Identification by SKU and GTIN facilitates inventory control and process traceability, so the right reference is always at hand when batch checks or setup changes are required. Careful handling and periodic cleanliness checks will maintain the surface condition and the declared dimensional accuracy for longer service life. Contact Metav Werkzeuge in Emmerich for specification matching and to source the precision gauge pin M323.836 directly from our stock. Technical data Article number: M323.836 GTIN: 4061905059797 Product: Gauge pin, single, 8.36 mm, ±0.001 mm, length 50 mm Core technical data Diameter: 8.36 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.026 kg Special features Material: Special steel Workshop version Compact reference geometry FAQ What is the declared tolerance of this gauge pin? The gauge pin M323.836 from Metav IndustryLine is specified with a tolerance of ±0.001 mm. What are the physical dimensions of the pin? The part has a nominal diameter of 8.36 mm and a length of 50 mm; the SKU is M323.836 and the GTIN is 4061905059797. Which material is used for the pin? The pin is made from special steel, specified for workshop use to provide durable contact surfaces and long service life. For which tasks is this gauge pin intended? This reference pin is designed for end‑dimension verification, fixture set‑up and routine go/no‑go checks in workshop metrology and quality control workflows. How should the pin be stored and handled? Keep the pin clean and dry, protect the contact surfaces from impacts and contamination, and store it in a controlled area to preserve dimensional integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.37mm Gauge Pin 50mm Length ±0.001mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of micrometric accuracy, robust special-steel construction and compact length for fast, repeatable gauging in workshop and inspection tasks; order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.837 – 8.37 mm, ±0.001 mm, 50 mm M323.837 is a single precision gauge pin intended for end‑measure verification and fit checks in workshop and quality‑control environments. Precision diameter 8.37 mm ±0.001 mm tolerance Robust special steel construction 50 mm length for compact inspections Delivered in protective transport case Ensure fit with micrometric certainty A tight tolerance of ±0.001 mm makes this gauge pin ideal where dimensional conformance directly influences assembly quality. The 8.37 mm diameter, held to sub‑micron deviation, reduces the need for repeated adjustments and minimises scrap caused by marginal fits. By using a dedicated precision pin, inspection routines become faster and more reproducible, which lowers cycle times in incoming inspection and final assembly checks while supporting consistent process control. Durable design tailored to workshop handling Manufactured from special steel and supplied in a workshop execution, the pin withstands everyday handling and resists localised wear that would otherwise compromise repeatability. The 50 mm length gives sufficient engagement for through‑hole and shallow bore checks without excess overhang, so handheld gauging and fixture use remain stable. Delivery in a protective transport case ensures the gauge arrives ready for immediate use and preserves the calibrated condition during storage and transport. Practical integration into inspection workflows The simple cylindrical form supports fast go/no‑go or dimensional checks and integrates easily with bench fixtures or sorting trays; traceable identification (SKU M323.837, GTIN 4061905060588) assists inventory and quality records. Where routine checks are frequent, replacing subjective judgement with a precision reference pin streamlines decision making and documents conformity for audits. The compact mass and low weight also make the pin convenient for portable inspection sets. For reliable fit confirmation in production or inspection, specify the M323.837 gauge pin from Metav IndustryLine through Metav Werkzeuge—contact Metav Werkzeuge for tailored advice and rapid delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.837 GTIN: 4061905060588 Label: Prüfstift, einzeln, 8,37mm, +/- 0.001 mm Länge 50 mm Manufacturer: Metav IndustryLine Material: Special steel Facts Diameter: 8.37 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.026 kg Special features Workshop execution Delivered in protective transport case Precision rating: ±0.001 mm Compact form for handheld and fixture use FAQ What applications is this gauge pin suitable for? The M323.837 gauge pin from Metav IndustryLine is intended for end‑measure verification and fit checks in workshops, incoming inspection and assembly testing where an 8.37 mm reference is required. Is the pin ready for immediate use upon delivery? Yes, the gauge pin is supplied in a protective transport case to preserve condition and arrives ready for use in inspection routines. Which material is used for the pin and what are the benefits? Constructed from special steel, the pin offers enhanced wear resistance and dimensional stability, supporting repeatable checks under workshop conditions. How is the product identified for traceability? Identification is provided by SKU M323.837 and GTIN 4061905060588, simplifying stock control and quality documentation for audit trails. Can this pin be used in fixtures or automated checks? The compact cylindrical design suits bench fixtures and handheld gauging; integration into automated or semi‑automated setups is possible when the fixture accommodates an 8.37 mm reference pin. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.38mm Test Pin Single, ±0.001 mm Accuracy, Length 50 mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of repeatable sub-micron accuracy, robust special steel construction and a compact 50 mm length for efficient in-process inspection; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.838 — Precision 8.38 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.838 is a single precision inspection pin for diameter verification and end‑measure checks in production and quality-control workflows. High tolerance: ±0.001 mm Diameter 8.38 mm for tight fits Length 50 mm, special steel construction Consistent diameter control for production The inspection pin delivers ±0.001 mm positional accuracy, enabling reliable pass/fail decisions on small diameters and tight-fit assemblies. Designed for metrology and workshop use, this pin reduces ambiguity at critical checkpoints: the tight tolerance translates into fewer false rejects and a lower rework rate, supporting continuous, measurable improvements in throughput. The compact form factor also allows straightforward integration into checking fixtures and assembly gages without adding complex handling steps. Repeatable inspection and faster set‑ups A short, rigid shaft with a defined end face delivers repeatable contact conditions that speed up repetitive checks. Where multiple measurements are required, the pin preserves measurement geometry and minimises variation between operators; this consistency is beneficial for SPC workflows and reduces time spent reconciling inconsistent readings. As an inspection tool built for production, the component supports efficient cycle times and clearer documentation of in‑process quality checks. Workshop‑ready material for frequent use Made from special steel, the pin withstands routine handling and resists surface wear that would otherwise alter functional diameter. The material choice balances hardness and machinability so that wear rates remain low while maintaining dimensional stability under normal workshop conditions. This robustness makes the pin suitable for regular use at assembly benches, inspection stations and in toolrooms where durable, repeatable measuring aids are required. Compact format for fixture integration and bench checks With a nominal diameter of 8.38 mm and an overall length of 50 mm, this inspection pin is sized for confined spaces and jigs while offering sufficient length for secure clamping in test fixtures. The small mass and compact geometry simplify manual handling and positioning, and the format suits both one-off checks and automated fixture cycles. Where space or access is limited, the pin provides a practical, precise solution without extensive fixturing redesign. Contact Metav Werkzeuge today for availability and application guidance on the Metav IndustryLine gauge pin M323.838 to ensure the correct tolerance strategy for your production line Technical data Article number: M323.838 GTIN: 4061905060595 Brand: Metav IndustryLine Facts Diameter: 8.38 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.026 kg Special features Material: special steel Category: gauge pin / inspection pin Format: single piece Workshop version FAQ What applications suit this inspection pin best? The gauge pin M323.838 is designed for diameter verification, end‑measure checks and fixture testing in precision engineering and production quality control. What is the declared dimensional accuracy of the pin? The inspection pin is specified with a tolerance of ±0.001 mm, making it suitable for tight‑fit verifications and critical accept/reject checks. Which material is used and how durable is it? Made from special steel, the M323.838 gauge pin is intended for routine workshop use and offers good resistance to wear while maintaining dimensional stability. Can this pin be used in fixture or jig setups? Yes — the 50 mm length and compact 8.38 mm diameter allow straightforward clamping and integration into inspection jigs or assembly fixtures. How does this pin support production quality processes? By providing repeatable contact geometry and tight tolerance, the inspection pin reduces measurement variability and supports faster, more reliable pass/fail decisions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.39mm Gauge Pin Single ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
Take advantage of ultra-fine tolerance and workshop-hardened construction for reliable go/no-go checks and repeatable inspection routines; the gauge pin combines ±0.001 mm accuracy with a compact 50 mm length and is supplied ready for safe transport — order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.839 — single precision gauge pin, Ø 8.39 mm, ±0.001 mm (Metav IndustryLine) A gauge pin M323.839 designed for precise checking of bores, end dimensions and plug-fit inspection in workshop and inspection environments ±0.001 mm tolerance Diameter 8.39 mm precision Length 50 mm workshop version Delivered in protective case High-precision measurement for reliable inspection The measuring element delivers an exceptional ±0.001 mm tolerance, making this gauge pin suitable where micrometric repeatability is required. The very fine tolerance reduces ambiguity in go/no-go checks and improves process control in batch inspections, which results in fewer rework cycles and faster decision times on the shop floor. The compact geometry and mass distribution also reduce the effect of handling errors, ensuring that each insertion provides a clear, binary assessment of fit. Workshop-hardened construction for daily use Manufactured from special steel, the pin is executed as a workshop version that balances wear resistance and dimensional stability. The 50 mm shank length and turned diameter of 8.39 mm give a robust contact area while remaining easy to handle during repetitive tasks. This construction supports sustained use in production environments, where frequent insertion and extraction demand a material that resists surface degradation and maintains the specified tolerance over time. Practical protection and traceability for quality systems Supplied in a protective case, the measuring pin arrives ready for safe storage and transport, reducing the risk of accidental damage before first use. The compact packaging eases organisation of inspection kits and supports traceability during audits. For metrology routines that require documentation, the gauge pin’s specifications and labelling integrate smoothly into quality records and work instructions, aiding compliance and reproducibility across shifts. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine gauge pin M323.839 can be integrated into existing inspection kits and to arrange procurement or technical consultation with our specialists Technical data Article number: M323.839 GTIN: 4061905060601 SKU: M323.839 Facts Diameter: 8.39 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.026 kg Special features Material: Special steel Workshop version Supplied in protective case Application: end dimension / plug-fit checks FAQ What level of accuracy does this gauge pin provide? The gauge pin M323.839 offers an accuracy of ±0.001 mm, suitable for micrometric go/no-go checks and tight-tolerance inspections. Is the gauge pin suitable for repeated use in production? Yes, the Metav IndustryLine gauge pin is a workshop version made from special steel and designed for regular insertion and removal in production inspection tasks. How is the gauge pin delivered and protected? The measuring pin is supplied in a protective case to prevent damage during transport and storage and to simplify kit organisation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com