Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
8.3mm Gauge Pin ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm precision, a compact 8.30 mm diameter and a robust 50 mm length for consistent end‑dimension checks in workshop environments; order directly via Metav Werkzeuge or consult our measurement specialists for application advice. Gauge pin M323.830 — single 8.30 mm diameter, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) A gauge pin M323.830 designed for precise end‑dimension inspection and routine workshop control tasks, supplied as a single piece for straightforward integration into existing inspection procedures High-precision ±0.001 mm tolerance Diameter 8.30 mm nominal 50 mm length, workshop design Special steel construction Repeatable measurement accuracy for process control This inspection pin delivers an exceptionally fine ±0.001 mm dimensional tolerance, making it suitable where small deviations affect fit and function. The tight tolerance reduces measurement uncertainty in repetitive checks and supports traceable quality control. Thanks to the compact cylindrical geometry and 8.30 mm nominal diameter, the component is easy to seat in reference bores and end faces, enabling fast verification of end dimensions without complex fixturing. The result is a measurable reduction in rework and clearer go/no‑go decisions during production checks. Robust build for everyday workshop use Manufactured from special steel, the pin combines surface stability with resistance to wear in routine inspection tasks. The 50 mm overall length balances handling comfort with sufficient engagement in shallow features; the single‑piece supply simplifies inventory management for spares and replacements. The workshop design emphasises durability under frequent handling and supports reliable contact measurement over many cycles. Where physical robustness matters, the material choice and compact form factor provide a pragmatic, low‑maintenance measurement aid. Simple traceability and inventory integration Each unit is identifiable for process documentation and stock control: SKU M323.830 and GTIN 4061905062421 facilitate procurement and traceability within quality systems. The single delivery format suits pick‑and‑use scenarios on the shop floor and reduces preparation time before measurement. For production environments that require predictable, repeatable check routines, the pin integrates directly into existing inspection sequences and complements conventional gauge sets without additional calibration steps noted in the product data. For reliable end‑dimension control, request a quotation or technical guidance from Metav Werkzeuge for the Metav IndustryLine gauge pin M323.830 — contact our measurement consultants at info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitability for specific applications Technical data Article number: M323.830 GTIN: 4061905062421 Label: Gauge pin, single, 8.30 mm ±0.001 mm, length 50 mm Facts Diameter: 8.30 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.026 kg Special features Workshop design Material: special steel Single piece delivery Intended use: end‑dimension checks FAQ What tolerance does the gauge pin offer? The gauge pin is specified with a ±0.001 mm dimensional tolerance for high‑precision end‑dimension checks. Which materials is the pin made from? The pin is manufactured from special steel, chosen for wear resistance and dimensional stability in workshop use. Is the product supplied as a single item or in sets? This item is supplied as a single piece under SKU M323.830 and is intended for individual replacement or spot checks. What applications suit this gauge pin best? The pin is intended for quick verification of end dimensions and reference bore checks in workshop inspection routines. How can the product be ordered or specified for procurement? Reference SKU M323.830 and GTIN 4061905062421 when specifying the gauge pin in procurement documents or inventory lists. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.41mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
High-precision gauging pin with an exact diameter of 8.41 mm and a tolerance of ±0.001 mm, presented in a workshop‑grade finish and supplied in a protective transport box; ideal for reproducible end‑measure checks and fixture set‑up. Order the gauging pin directly via Metav Werkzeuge or consult the Metav team for application guidance. Gauging pin M323.841 — single 8.41 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The gauging pin M323.841 is a workshop‑grade inspection pin for precision end‑measure verifications and fixture alignment in machine shops and production environments Workshop‑grade construction Diameter 8.41 mm, tolerance ±0.001 mm Length 50 mm for fixture set‑up Supplied in a transport box for protection Consistent accuracy that supports production control Manufactured for demanding inspection tasks, this inspection pin delivers a tolerance of ±0.001 mm, which stabilises pass/fail decisions at the control stage and reduces rework. The combination of a defined diameter and a tightly held length makes the component suitable as a repeatable reference for checking bores and locating features. Where measurement reproducibility is required, the precise diameter reduces statistical dispersion in sampling and strengthens quality documentation across batches. Robust design for workshop environments and safe handling Designed as a workshop‑grade tool, the pin is produced from special steel to balance hardness and wear resistance while retaining corrosion protection during everyday use. The compact mass (approx. 0.026 kg) and the 50 mm shank length make it easy to position in fixtures without introducing undue leverage or handling strain. Delivery in a transport box minimises the risk of nicks and surface damage in transit, preserving the reference diameter and ensuring consistent performance over many inspection cycles. Practical integration into inspection and set‑up routines The pin’s form factor supports quick insertion into gauges, templates and assembly checks, allowing technicians to speed up set‑up times and maintain machine availability. As a single calibration reference, the item simplifies the verification of bore diameters and end‑measures during first‑off checks and routine sampling. Traceability is aided by the clear SKU and GTIN markings, which help operators track the specific tool used for a given inspection task, improving auditability and quality records. Contact Metav Werkzeuge for tailored application advice or to secure the M323.841 gauging pin directly from our Emmerich warehouse Technical data Article number: M323.841 GTIN: 4061905060625 Label: Prüfstift, einzeln, 8,41mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 8.41 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.026 kg Special features Material: special steel Workshop execution Supplied in plastic or wooden transport box SKU: M323.841 FAQ What is the intended use of this gauging pin? The M323.841 gauging pin is intended for precise end‑measure checks, bore verification and fixture alignment in workshop and production settings. Is the diameter tolerance sufficient for high‑precision inspection? Yes, the ±0.001 mm tolerance of the M323.841 inspection pin supports tight Go/No‑Go decisions and repeatable measurement outcomes in quality control. Which material is used and how does it affect longevity? The pin is made from special steel, offering a balance of hardness and wear resistance that preserves the reference diameter under normal workshop use. How is the item delivered to protect the measuring surface? Due to the box provision, the gauging pin is supplied in a plastic or wooden transport box to prevent surface damage during handling and shipping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.42mm Gauge Pin Single, ±0.001mm Accuracy, Length 50mm Workshop Version - Metav IndustryLine
Take advantage of a workshop-grade gauging pin that combines micrometre-level accuracy with robust handling: the 8.42 mm diameter and ±0.001 mm tolerance provide reproducible end measurements, while the 50 mm length and special steel body ensure durability in daily inspection routines. Order directly via Metav Werkzeuge or contact the consultants for application advice. M323.842 measuring pin — 8.42 mm, ±0.001 mm, Metav IndustryLine The M323.842 measuring pin is a single, workshop‑grade gauging pin designed for precise end measurements and repeatable gap or bore verification in inspection and assembly tasks Workshop-grade robustness Diameter 8.42 mm with ±0.001 mm accuracy 50 mm length for standard end measurements Supplied in protective transport case Repeatable precision that speeds up inspection The pin offers ±0.001 mm tolerance on an 8.42 mm diameter, a level of accuracy that reduces rework and supports consistent interchangeability across batches. In practical terms, this precision means that fitting, clearance and end‑measurement checks return reliable numeric results without frequent recalibration, which saves time in serial inspection. The tight tolerance is particularly beneficial where end‑mass control is part of the quality workflow. Robust construction for workshop conditions Made from special steel and specified as a workshop version, the component resists surface wear and tolerates the handling typical of production environments. The compact 50 mm shank length keeps the pin easy to manoeuvre while providing the stiffness required to avoid bending in common use. The construction translates into longer service life and reduced replacement frequency, supporting continuous operation on the shop floor. Practical handling and traceable delivery Supplied individually and packed in a protective transport case, the pin arrives ready for secure storage and immediate use, reducing transit damage and contamination. The compact weight and clear identification (SKU M323.842, GTIN 4061905060632) make inventory management straightforward. The design focuses on one clear benefit per check: stable contact geometry for end measurements that are fast to perform and simple to document. Contact Metav Werkzeuge for Metav IndustryLine gauging pins — available from Emmerich with expert advice at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: M323.842 GTIN: 4061905060632 Category: Messstifte Label: Prüfstift, einzeln, 8,42mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 8.42 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.026 kg Special features Material: Special steel Workshop version Supplied in protective transport case SKU: M323.842 FAQ What level of accuracy can be expected from this gauging pin? The gauging pin delivers a tolerance of ±0.001 mm, ensuring high repeatability for end‑measurement and fit checks with the Metav IndustryLine M323.842. Is the pin suitable for everyday shop‑floor use? Yes; the workshop version and special steel construction make the pin durable enough for regular inspection and assembly tasks. How is the pin supplied and protected during transport? The pin is supplied individually in a protective transport case to prevent damage and contamination during handling and storage. Can the M323.842 be tracked in inventory systems? Yes; the product is identified by SKU M323.842 and GTIN 4061905060632 for straightforward inventory management. What applications is this measuring pin intended for? The pin is intended for end‑measurements, bore and gap verification, and gauging tasks where micrometre accuracy and stable contact geometry are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.43mm Gauge Pin, Single, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of workshop-grade precision and the ultra-fine ±0.001 mm tolerance to ensure reproducible end‑dimension checks in routine quality control. The combination of a true 8.43 mm diameter, a compact 50 mm length and robust special steel construction supports reliable in‑process verification and fixture calibration — order supply or request advice from Metav Werkzeuge for fast delivery and technical guidance. M323.843 Gauge Pin – 8.43 mm, ±0.001 mm (Metav IndustryLine) The M323.843 is a precision gauge pin designed for end‑dimension verification and fixture set‑up in workshop and small‑series metrology. Precision gauge pin 8.43 mm diameter Tolerance ±0.001 mm for fine verification 50 mm overall length for confined measurements Made from special steel for workshop use Consistent, measurable precision for daily inspection The M323.843 is engineered as a precision gauge pin that translates micro‑accuracy into routine usability. With an 8.43 mm diameter held to a ±0.001 mm tolerance, the pin reduces uncertainty when checking bore sizes, plug fits or mating features. The modest 50 mm length keeps the probe easy to handle and well suited to confined setups, while the special steel construction provides the mechanical stability required for repeated contact. This combination supports faster inspection cycles and clearer pass/fail decisions, helping to reduce rework and downtime. How ultra‑fine tolerance improves process control A stated tolerance of ±0.001 mm represents a high level of dimensional confidence in a compact test artefact. For quality teams this means that deviations identified during in‑process checks are attributable to the measured part rather than the measuring tool. Where verification of end dimensions or plug gauges is part of a process control loop, such repeatability feeds reliable statistical control charts and reduces false rejects. The metallic construction and precision ground surfaces support consistent contact conditions, improving repeatability across multiple operators and shifts. Designed for pragmatic workshop use and simple integration This gauge pin is a workshop‑grade item intended for direct use in production environments: compact, robust and straightforward to locate in fixtures or checking rigs. The pin’s low mass (approx. 0.026 kg) and standard geometry make it compatible with existing gauge holders and test benches. Identification by SKU and GTIN simplifies inventory control and traceability when integrated into inspection routines. The product is therefore suited both to single‑item verification and to incorporation into modular gauge sets for small‑batch assembly checks. For supply and technical advice on the M323.843 gauge pin from Metav IndustryLine, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.843 GTIN: 4061905060649 Category: Messstifte (gauge pins) Material: special steel Diameter: 8.43 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.026 kg eClass: 21170231 Label: Prüfstift, einzeln, 8,43mm, +/- 0.001 mm Länge 50 mm Facts Diameter (nominal): 8.43 mm Measuring range: 8.43 mm Length overall: 50 mm Dimensional accuracy: ±0.001 mm Mass: 0.026 kg Special features Workshop execution Single gauge pin delivery Precision ground surfaces SKU: M323.843 GTIN: 4061905060649 FAQ What is the declared accuracy of this gauge pin? The M323.843 gauge pin from Metav IndustryLine is specified to ±0.001 mm, providing sub‑micrometre sensitivity for end‑dimension verification and high‑confidence pass/fail checks. For which inspection tasks is this pin suitable? The pin is intended for end‑dimension checks, plug‑gauge comparisons, fixture set‑up and verification of mating bores where an 8.43 mm reference is required; it suits workshop and small‑series metrology tasks. What material is the gauge pin made from and how durable is it? The M323.843 is manufactured from special steel in a workshop‑grade finish, offering the mechanical stiffness needed for repeated contact measurements in production environments. Can this pin be used in existing gauge holders and fixtures? Yes. The compact 50 mm length and standard cylindrical geometry of the M323.843 allow straightforward integration into common holders and modular gauge assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.44mm Test Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Precision testing for small-diameter checks: combine ±0.001 mm tolerance with an 8.44 mm diameter and a sturdy 50 mm length to secure reproducible end‑measure inspections; order the gauge pin directly via Metav Werkzeuge or request advice from our inspection specialists. M323.844 Gauge Pin — 8.44 mm, ±0.001 mm, 50 mm (Metav IndustryLine) The M323.844 gauge pin is a single, workshop-grade reference pin for precise end‑measurement verification and plug‑gauge checks in component inspection workflows. Precision tolerance ±0.001 mm Diameter 8.44 mm for end-measure checks 50 mm hardened special-steel pin Workshop execution for robust use Reliable reference for tight tolerances A solid gauge pin with a declared ±0.001 mm tolerance provides a dependable reference when assessing bore dimensions or checking mating parts. The extremely tight tolerance reduces measurement uncertainty and supports consistent go/no‑go decisions during incoming inspection or in‑process controls. By using a fixed‑dimension pin rather than variable measurement methods, batch variability is limited and rework rates can fall, improving production throughput and traceable quality documentation. Robust construction for workshop environments Manufactured from special steel and finished for workshop resilience, the pin’s 50 mm length offers a practical grip length while keeping the measuring face stable during handling. The solid construction resists deformation during routine use, ensuring dimensional retention over repeated cycles and minimising downtime for replacement. This robustness is particularly advantageous in busy inspection benches where tools are handled frequently and must remain reliable under mechanical stress. Streamlined integration into inspection routines With a compact diameter of 8.44 mm, the pin is suited for small-bore verification, gauging fixtures and reference master sets. Its single‑piece format simplifies storage and handling compared with multi‑part gauges, and the standardised dimensions facilitate rapid substitution into existing measurement jigs. Implementing fixed reference pins accelerates inspection throughput and provides clear, repeatable results suitable for production control and inspection records. For procurement and technical advice on Metav IndustryLine inspection tools, contact Metav Werkzeuge directly at info@metav-werkzeuge.com or +49 2822 7131930 to secure the M323.844 gauge pin and support documentation Technical data Article number: M323.844 GTIN: 4061905060656 Brand: Metav IndustryLine Core specifications Diameter: 8.44 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.026 kg Materials and features Material: Special steel Workshop execution Single test pin (individual) Category: Gauge pin / test pin FAQ What measurement tolerance does this gauge pin provide? The M323.844 gauge pin is manufactured to a tolerance of ±0.001 mm, providing the high precision required for tight bore and mating part checks. Is the pin suitable for workshop use and repeated handling? Yes. The Metav IndustryLine M323.844 is a workshop-grade, single test pin made from special steel and designed for robust handling in inspection environments. Which diameter and length are specified for this reference pin? The reference pin has a diameter of 8.44 mm and a length of 50 mm, dimensions that suit small-bore verification and integration into standard inspection jigs. Can this pin be used as a fixed reference in existing gauging fixtures? Yes. The M323.844 gauge pin’s standard dimensions and solid construction make it straightforward to install as a fixed reference in existing fixtures and master sets. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.45mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from ±0.001 mm repeatability, a compact 50 mm measuring length and 8.45 mm diameter for reliable end‑measure checks; the measuring pin is built from special steel and supplied in a protective transport case for safe handling. Order the measuring pin directly via Metav Werkzeuge or contact our consultants for application advice. Measuring pin M323.845 — 8.45 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) A Measuring pin M323.845 designed for precision end‑measure checks and gauge fixtures in workshop and inspection environments. Workshop version for robust use Diameter 8.45 mm, tolerance ±0.001 mm Length 50 mm, stable measuring shank Supplied in transport case Precision that delivers repeatable end‑measure results The pin provides a tolerance of ±0.001 mm, ensuring a level of repeatability suited to fine inspection tasks and reference gauges. As an end‑measure component, the element is intended for short, high‑accuracy contacts where runout and seating are critical; the small diameter and defined contact geometry reduce geometric uncertainty. This makes the component a reliable choice for fixture masters, go/no‑go checks and contact points in measuring assemblies, where measurable tolerance control directly reduces rework and inspection time. Robust design for everyday workshop demands Built in a workshop version with special steel, the pin balances hardness and wear resistance to withstand repeated engagement with gauge blocks and workpieces. Its compact 50 mm shank keeps deflection negligible while the low mass aids fast, controlled positioning during manual inspection routines. Supplied in a transport case, the item arrives protected for storage and transit, preserving the measuring face and preventing damage that would otherwise affect measurement integrity. Simple integration into gauges and inspection workflows The pin is prepared for direct use in jigs, plug gauges and dedicated inspection fixtures, reducing adaptation work on the shop floor. With a standardised diameter of 8.45 mm and clearly defined tolerance, the component is straightforward to reference in inspection plans and drawing notes. The product code M323.845 identifies the configuration unambiguously in procurement and quality documentation, easing inventory control and traceability within calibrated inspection environments. Discuss fixture compatibility or procurement with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm fitment and order the M323.845 measuring pin for workshop use Technical Data Article number: M323.845 GTIN: 4061905060663 Brand: Metav IndustryLine Category: Measuring pins Description: Measuring pin, single, 8.45 mm, ±0.001 mm, length 50 mm Facts Diameter: 8.45 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.026 kg Special features Material: special steel Workshop version Supplied in transport case Intended for end‑measure applications FAQ What accuracy can be expected from this measuring pin? The M323.845 measuring pin offers an accuracy of ±0.001 mm, making it suitable for demanding end‑measure checks and precision fixture reference points. Is the component ready for immediate use on delivery? Yes, the pin is supplied in a protective transport case and is ready for installation into gauges and fixtures as delivered. Which material is used for the pin and why does it matter? The pin is made from special steel, chosen for its wear resistance and dimensional stability under repeated contact, preserving measurement reliability. Can this pin be used in manual inspection and automated fixtures? The configuration and compact 50 mm length make the pin suitable for both manual inspection routines and integration into automated or semi‑automated fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.46mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of exceptionally tight tolerances and a robust workshop design to secure reliable end‑measurements and shorter inspection cycles; the 8.46 mm diameter and ±0.001 mm tolerance provide repeatable reference values for precision checks. Order directly via Metav Werkzeuge or contact the consultants for specification matching and batch enquiries. Gauge pin M323.846 — precision test pin, Ø 8.46 mm, ±0.001 mm, length 50 mm (Metav IndustryLine) Gauge pin M323.846 is a hardened precision test pin intended for end‑measurement and reference checking in workshop and inspection environments. High‑accuracy tolerance ±0.001 mm Diameter precisely 8.46 mm Workshop design for daily use Delivered in transport case Consistent reference for routine checks and set‑ups The core benefit of this precision pin is its repeatability in recurring measuring tasks. With a nominal diameter of 8.46 mm and a tolerance of ±0.001 mm, the element functions as a stable reference for go/no‑go checks, setting gauges and verifying bore diameters. The fine tolerance reduces measurement uncertainty during quick control loops, enabling faster decision making on production lines. Using a dedicated gauge pin for end measurements shortens setup times and avoids repeated adjustment of master gauges, which translates into measurable time savings for inspection routines. Robust workshop design and material resilience Manufactured from special steel and specified as a workshop design, the pin is designed to withstand frequent handling and contact with hardened fixtures. The material choice balances wear resistance and machinability, allowing the pin to keep its diameter over many cycles. Supplied in a transport case, the component arrives protected against knocks and contamination, preserving the calibrated surface until first use. These design choices support consistent measurements across multiple shifts and make the pin suitable for busy maintenance shops and small series quality control. Practical integration into inspection workflows The compact length of 50 mm and the precise cylindrical form make the pin easy to use within standard fixture arrangements, bench setups and fixture verification procedures. As a simple reference artefact, it complements gauge blocks, micrometres and calipers by providing a fixed diameter for comparative testing. The small footprint and robust geometry allow rapid positioning and reduced fixturing effort, which helps maintain throughput without compromising measurement fidelity. For traceable inspection records, document each use in the quality log to correlate checks with production batches. Reliability, efficiency and procurement confidence Choosing this precision test pin contributes directly to operational reliability: its tight tolerance supports stricter in‑process control and reduces scrap risk from undetected dimensional drift. The compact format suits repeated manual handling while the hardened surface fights wear, keeping intervals between replacements longer. As part of a coordinated measuring kit, the pin helps standardise checks across teams and workstations, improving comparability of results and simplifying operator training. Contact Metav Werkzeuge today for delivery options or to discuss batch and calibration needs; Metav Werkzeuge can advise on compatible inspection accessories and supply volume quotes directly from Emmerich Technical Data Article number: M323.846 GTIN: 4061905061073 SKU: M323.846 Facts Diameter: 8.46 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.026 kg Special features Material: Special steel Version: Workshop design Delivery: Transport case included Category: Gauge pin / Test pin FAQ What is the intended use of this gauge pin? The gauge pin M323.846 is intended as a precision reference for end‑measurement, fixture checks and go/no‑go verification in workshop and inspection applications. Is the pin suitable for frequent handling in a production environment? Yes, the workshop design and special steel construction make the M323.846 suitable for regular handling and routine checks without rapid wear. How precise is the diameter control on this test pin? The test pin is manufactured to a nominal diameter of 8.46 mm with a tolerance of ±0.001 mm, providing a stable reference for tight inspection limits. Does the delivery include protection for transport and storage? The product is supplied in a transport case to protect the measuring surface during transit and initial storage. Can this gauge pin be used alongside gauge blocks and calipers? The pin complements gauge blocks and calipers as a fixed diameter reference, simplifying comparative checks and fixture verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.47mm Gauge Pin Single ±0.001 mm Length 50 mm, Workshop Version - Metav IndustryLine
Taking advantage of workshop-grade construction, sub-micron tolerance and a compact 50 mm length provides reliable end‑measurement control and faster inspection cycles; order the part directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine Gauge Pin M323.847 — 8.47 mm, ±0.001 mm, 50 mm length The Metav IndustryLine gauge pin is a precision inspection pin for end‑measurements and go/no‑go checks in workshop and inspection environments. Workshop-grade precision pin 8.47 mm Tolerance ±0.001 mm for high accuracy Length 50 mm for deep measurements Special steel construction Accurate end‑measurement for consistent inspection results This inspection pin delivers repeatable end‑measurement performance thanks to a narrow tolerance of ±0.001 mm and a precisely ground 8.47 mm diameter. The tight specification reduces measurement scatter and shortens the decision loop during quality checks, enabling faster acceptance or rejection of batches. As a compact 50 mm probe, the component suits confined fixtures and checking stations where a stable reference diameter is required. The result is a measurable reduction in rework and downtime through clearer pass/fail outcomes. Designed for efficient workshop use and quick integration The workshop version is built for robust handling while keeping metrology benefits at the forefront. Its special steel composition provides surface hardness and wear resistance appropriate for frequent contact checks, prolonging service life under routine use. The compact geometry simplifies handling in bench fixtures and gauge blocks, making the pin an efficient choice for in‑process verification and end‑of‑line inspection. Integration into existing jigs or comparator setups is straightforward, supporting lean inspection workflows. Clear technical benefits that support quality assurance With its sub‑micron accuracy, the gauge pin supports objective quality decisions and traceable measurement routines. The narrow tolerance improves sampling confidence and reduces statistical uncertainty when used as a reference mandrel or plug for bore inspection. The product’s workshop specification also means maintenance is straightforward; reconditioning or replacement intervals can be scheduled against measured wear, helping to maintain control plans and inspection intervals without guesswork. Practical suitability and application scenarios The part is suitable for hard engineering tasks where accurate end‑measure dimensions are critical, such as final component verification or fixture checking. Applications include checking bore interfaces, verifying mating parts and serving as a master reference in assembly controls. The robustness and small footprint of the probe make it particularly useful in jobbing shops or production lines where space is limited but precision cannot be compromised. For procurement and inventory purposes, the compact pin also eases storage and handling compared with bulkier reference tools. For assured end‑measurement performance, select the Metav IndustryLine gauge pin M323.847 and contact Metav Werkzeuge for specification guidance and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.847 GTIN: 4061905061684 Brand: Metav IndustryLine Facts Diameter: 8.47 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.026 kg Special features Material: Special steel Workshop version Category: Gauge pins Suitable for end‑measure checks FAQ What level of accuracy does this gauge pin provide? The Metav IndustryLine gauge pin M323.847 offers an accuracy of ±0.001 mm, suitable for high‑precision inspection tasks. Can the pin be used for repeated go/no‑go checks in a production environment? Yes. The workshop‑grade construction and special steel make the pin appropriate for repeated go/no‑go checks and routine inspection duties. Is this gauge pin suitable for use as a reference mandrel? The pin’s tight tolerance and stable geometry allow it to serve effectively as a reference mandrel for bore verification and mating part checks. Which applications are typical for this inspection pin? Typical applications include end‑of‑line verification, fixture checking and dimension control of mating components where precise end measurements are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.48mm Gauge Pin, Single, ±0.001 mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from high‑precision end‑dimension verification and a robust special‑steel construction for repeatable inspection results; the compact 50 mm length and ±0.001 mm tolerance support efficient quality control workflows. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.848 gauge pin — 8.48 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A M323.848 gauge pin designed for precise end‑dimension checks and routine workshop inspection tasks, combining micrometre‑grade tolerance with a compact 50 mm form factor. Extreme accuracy ±0.001 mm tolerance Nominal diameter 8.48 mm for end‑dimension control Length 50 mm for confined or deep checks Workshop version, robust special steel construction Faster pass/fail decisions through measurable precision The ±0.001 mm tolerance of this test pin turns subjective fit checks into objective criteria, reducing rework and inspection time. By providing a fixed reference diameter of 8.48 mm, the pin enables reproducible go/no‑go assessments and supports statistical process control when used in jigs or fixture checks. The compact 50 mm length maintains stiffness for short‑run measurements while remaining manoeuvrable for frequent use, so inspection cycles become more efficient without sacrificing traceable accuracy. Durable, workshop‑oriented design that simplifies handling Constructed from special steel, the pin is prepared for everyday mechanical use where resistance to wear matters. The workshop version is balanced for handheld checking and compatible with bench fixtures; at approximately 0.026 kg it is easy to position yet heavy enough to seat reliably in bores and gauges. This design reduces operator fatigue and speeds repetitive tasks, while the single‑piece format avoids alignment ambiguities typical of multi‑component gauges. Seamless integration into existing quality routines As a standardised gauge pin, the component slots directly into established inspection routines and fixture sets, supporting consistent end‑dimension verification across production batches. The clear specifications — nominal diameter, length, and tolerance — allow rapid documentation in quality records and facilitate procurement for spare‑part inventories. Backed by Metav IndustryLine's workshop portfolio, the pin benefits from a distribution network that emphasises reliable supply and a broad selection of complementary measuring tools. For reliable end‑dimension control choose the Metav IndustryLine M323.848 gauge pin — contact Metav Werkzeuge in Emmerich for expert advice and order handling at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.848 GTIN: 4061905061691 Brand: Metav IndustryLine Core measurements Diameter nominal: 8.48 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.026 kg Design & special features Workshop version Material: special steel Single gauge pin for end‑dimension checks Category: Gauge pins (Messstifte) FAQ What tolerance does the M323.848 gauge pin provide? The M323.848 gauge pin from Metav IndustryLine is specified with a tolerance of ±0.001 mm for precise end‑dimension assessment. For which inspection tasks is this gauge pin intended? This single gauge pin is intended for end‑dimension checks, go/no‑go assessments and integration into fixture or jig verifications where a fixed reference diameter is required. Is the design suitable for workshop use? Yes, the workshop version and special steel construction make the pin robust for daily workshop handling and routine inspection tasks. How should the pin be handled and stored? Handle the pin with clean fingers or gloves to avoid oil transfer; store it in a clean, dry location to preserve the measurement surface and prevent corrosion. What are the nominal dimensions of this product? Nominal diameter is 8.48 mm and overall length is 50 mm; refer to SKU M323.848 for ordering and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.49mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Precise measurement results and robust shop‑floor handling are combined here: the pin's ±0.001 mm tolerance and special steel construction ensure repeatable end‑measure checks, while the 50 mm length suits most fixture and reference applications. Order the gauge pin directly via Metav Werkzeuge or consult their advisors for tailored procurement. M323.849 gauge pin — 8.49 mm, ±0.001 mm (Metav IndustryLine) A M323.849 gauge pin for end‑measure inspection and workshop metrology, offering a precise 8.49 mm diameter and 50 mm overall length. 8.49 mm diameter for precise reference fits Tolerance ±0.001 mm for high repeatability 50 mm length, workshop-grade construction Supplied in protective transport case Consistent, traceable measurements on the shop floor The 8.49 mm reference pin delivers high repeatability thanks to its tight ±0.001 mm tolerance, making it suitable for precision fit checks, gauge blocks and go/no‑go references. This level of accuracy supports reliable pass/fail decisions during incoming inspection and assembly control, reducing the risk of unnoticed deviations. Clear numerical tolerances enable straightforward documentation in quality records and support traceable measurement routines. Durable construction that stands up to daily use Manufactured from special steel and specified as a workshop version, the pin combines wear resistance with handling robustness expected in routine production environments. The 50 mm length provides a convenient reach for typical fixtures while keeping stiffness high for consistent contact conditions. Supplied in a protective transport case, the item arrives ready for safe storage and transfer between inspection stations, protecting the calibrated surface from knocks and contamination. Integration into inspection workflows to save time As a compact reference element for end‑measure tasks, this pin shortens setup time on jigs and reduces adjustment iterations when aligning components. The compact geometry and precise diameter fit into established metrology routines and fixture bores, allowing quick comparative measurements and repeatable positioning. Incorporating this reference pin into regular checks helps to lower scrap rates and supports a reliable production flow by catching deviation early. For reliable end‑measure references based on ±0.001 mm capability, contact Metav Werkzeuge GmbH in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss supply and suitability for specific inspection tasks. Technical data SKU: M323.849 GTIN: 4061905061707 Manufacturer: Metav IndustryLine Core technical figures Diameter: 8.49 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.026 kg Special features Material: special steel Workshop version construction Supplied in protective transport case for transport Intended for end‑measure reference applications FAQ What is the measurement tolerance of this reference pin? The reference pin is manufactured to a tolerance of ±0.001 mm, suitable for high‑precision reference and end‑measure operations. Which material is used for the pin? The pin is made from special steel, specified for workshop durability and dimensional stability under normal handling. Is the pin supplied with protective packaging? Yes, the pin is supplied in a protective transport case to prevent damage during handling and transfer between stations. For which applications is this pin intended? This gauge pin is intended for end‑measure checks, reference fits in fixtures and comparative inspection tasks on the shop floor. Can the pin be used directly in fixture bores and gauges? The 8.49 mm diameter and 50 mm length make it suitable as a reference element in fixtures and gauge assemblies that accept that nominal size. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.4mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade construction, ±0.001 mm accuracy and a compact 50 mm length for reliable end‑measure checks. The precise 8.40 mm diameter pin provides reproducible reference points in inspection and fixture setting — order directly via Metav Werkzeuge or consult our specialists for application support. Gauge pin M323.840 — 8.40 mm diameter, ±0.001 mm accuracy (Workshop version) The Gauge pin M323.840 is a workshop‑grade precision test pin intended for end‑dimension checks and fixture set‑up in production and inspection environments Workshop‑grade construction Diameter 8.40 mm with ±0.001 mm tolerance Length 50 mm for end‑measure checks Supplied in protective transport case Measure with machine‑level certainty The core advantage of this precision pin is its ±0.001 mm tolerance, which turns single reference measurements into trusted data for production decisions. A tight diameter tolerance of 8.40 mm minimises variation when used as a reference or setting pin, so reading spreads and adjustment offsets are reduced. Presented here as a compact, single‑piece inspection tool, the pin makes repeatable end‑measure checks straightforward and helps maintain process stability by providing a consistent physical datum. Built to endure the workshop environment Manufactured from special steel, the construction emphasises dimensional stability and wear resistance for routine use. With a 50 mm overall length and a low mass, the pin is easy to handle while remaining rigid enough for reliable contact in fixtures and gauges. The workshop‑grade execution balances robustness with precision, enabling use at the bench or on a production line. Supplied in a protective transport case, the component arrives ready for safe storage and movement between workstations. Integrates into inspection and fixture workflows Designed for end‑dimension and setting tasks, this precision pin functions as a straightforward reference for bore alignment, gauge setup and final inspection of mating parts. Use as a locating or measuring plug when checking end masses or verifying bore fits; the compact format supports tight spaces and short‑run checks. Traceable labelling and a stable geometry make it suitable for periodic comparison measurements and routine quality control, supporting consistent outcomes across shifts. For workshop precision and reliable reference measurements, request the Metav IndustryLine gauge pin M323.840 through Metav Werkzeuge or contact our advisors at info@metav-werkzeuge.com / +49 2822 7131930 for tailored guidance. Technical data Article number: M323.840 GTIN: 4061905060618 Label: Prüfstift, einzeln, 8,40mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 8.40 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.026 kg Special features Material: Special steel Workshop execution Supplied in protective transport case SKU: M323.840 FAQ What is the intended use of this gauge pin? The gauge pin is intended for end‑dimension checks, fixture set‑up and reference measurements; the M323.840 from Metav IndustryLine is suitable for locating and quick inspection tasks. How precise is the diameter of the pin? Diameter precision is ±0.001 mm, making the pin appropriate where tight dimensional reproducibility is required. Which material is used for the pin? The test pin is manufactured from special steel, selected for dimensional stability and resistance to wear under routine workshop use. Is the pin delivered ready for storage and transport? Yes, the component is supplied in a protective transport case to safeguard the geometry during handling and transfer between workstations. Can the pin be used for fixture alignment on a production line? The compact design and rigid construction make the pin suitable for fixture alignment and repeatable reference measurements in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.51mm Gauge Pin Single, ±0.001mm Precision, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from workshop-grade robustness, ±0.001 mm tolerance and a compact 50 mm length for reliable in-process inspection. Order the gauge pin directly via Metav Werkzeuge or ask the consultants if further specification matching is required. M323.851 – Single gauge pin, 8.51 mm, ±0.001 mm (Metav IndustryLine) M323.851 is a workshop-ready inspection pin designed for precise checking of holes, shafts and gauge fixtures in production and inspection environments. Workshop-grade construction, hardened special steel Tolerance ±0.001 mm for high-precision checking Diameter 8.51 mm, length 50 mm Delivered in transport box for protection Precision that secures quality and reduces rework The gauge pin delivers a declared tolerance of ±0.001 mm, enabling repeatable checks where high conformance is required. In routine inspection tasks this level of accuracy reduces the risk of false rejects and minimises rework by providing a trustworthy reference for hole and shaft diameters. As a hard, single inspection pin, it is suitable for quick go/no-go checks and for use as an end mass in gauge assemblies, supporting efficient throughput in manufacturing processes. Robust build for workshop use and long service life Made from special steel and offered in a workshop specification, the pin is engineered to withstand frequent handling and contact with hardened surfaces. The 50 mm length and compact mass provide stable seating in fixtures while keeping handling simple; the low weight supports fast manual positioning during repeated inspections. Delivered in a protective transport box, the component remains protected during storage and transit, preserving its measuring integrity until deployed on the shop floor. Simple integration into inspection routines and traceability The pin is supplied as a single, traceable item (SKU M323.851) suitable for direct insertion into gauges, plug sets or fixture bores. The compact geometry and standard diameter make it compatible with common test rigs and gauge blocks, facilitating quick interchange and calibration cycles. Marked identification and GTIN support inventory control and documentation in quality records, helping to maintain audit trails and production transparency across batches. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge to confirm fitment and order the M323.851 gauge pin with ±0.001 mm tolerance directly from our Emmerich distribution centre. Technical Data Article number: M323.851 GTIN: 4061905061721 Eclass: 21170231 Label: Prüfstift, einzeln, 8,51mm, ±0.001 mm, length 50 mm Facts Diameter: 8.51 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.027 kg Special features Material: Special steel Workshop version Delivered in transport box Story trigger: end masses FAQ What tolerance does the gauge pin offer? The gauge pin is specified with a tolerance of ±0.001 mm, providing high-precision reference for inspection tasks. Is the pin suitable for fixture and gauge use? Yes, the single inspection pin M323.851 is intended for use in gauges, fixtures and as an end mass within inspection assemblies. How is the gauge pin delivered and protected? The component is supplied in a transport box to protect the pin during storage and transit and to preserve its measuring surface. Which material is used for the inspection pin? The pin is manufactured from special steel in a workshop-grade finish to ensure durability under frequent use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.52mm Gauge Pin Single, ±0.001mm, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of 8.52 mm nominal diameter, ±0.001 mm tolerance and the 50 mm length to secure reproducible reference measurements and fast go/no‑go checks; order the gauge pin (M323.852) directly via (Metav Werkzeuge) or ask our consultants if needed. M323.852 gauge pin — precision test pin, 8.52 mm, ±0.001 mm, 50 mm length M323.852 gauge pin is a compact precision reference for dimensional checking and go/no‑go verification in industrial metrology and workshop inspection Diameter 8.52 mm ±0.001 mm 50 mm length workshop version Special steel construction High dimensional stability and repeatability Faster inspection through micrometric accuracy With a declared ±0.001 mm tolerance and a nominal 8.52 mm diameter, this test pin provides a stable reference that reduces retesting and speeds up acceptance decisions. The tight tolerance allows reliable plug‑fit checks and repeatable bench measurements; using a single, hardened reference reduces stack‑up uncertainty and simplifies inspection protocols. As a result, measurement cycles become more predictable and throughput for routine checks increases. Built for workshop handling and long service life The workshop execution and special steel material are configured to withstand frequent handling without losing form. The short, rigid shaft geometry and the moderate 50 mm length help to minimise bending and ensure consistent contact conditions during insertion and tactile verification. This construction translates into lower downtime for replacements and steady performance in everyday production environments. Simple integration into quality routines and traceability The compact design makes the plug gauge easy to store in tool cabinets or fixture boxes and straightforward to pick for iterative checks. The clear labelling (M323.852) and accessible dimensions support traceability in inspection sheets and measuring plans, while the small mass ensures negligible influence on balance‑sensitive setups. The product suits laboratories and shop floors that require a robust, repeatable reference pin for routine dimensional control. For a reliable reference pin that supports lean inspection workflows, contact Metav Werkzeuge in Emmerich to discuss availability of the M323.852 and arrange delivery from our European stock. Technical data Article number: M323.852 GTIN: 4061905061738 Weight: 0.027 kg Length: 50 mm Diameter: 8.52 mm Tolerance: ±0.001 mm Material: Special steel Label: Prüfstift, einzeln, 8,52mm, +/- 0.001 mm Länge 50 mm Facts Category: Messstifte SKU: M323.852 ECLASS: 21170231 Mass classification: workshop execution Special features Precision tolerance ±0.001 mm Compact 50 mm shaft for reduced bending Designed for repeatable plug‑fit checks Workshop version for routine use FAQ What level of accuracy can be expected from this test pin? The M323.852 test pin is specified with a tolerance of ±0.001 mm, providing micrometric accuracy suitable for precise plug‑fit and reference measurements. Is the material suitable for frequent mechanical use? Yes, the gauge pin is made from special steel and the workshop execution is intended for regular handling and routine inspection tasks. Can the pin be used as a reference in calibration plans? The M323.852 serves as a stable reference for dimensional checks and can be documented in calibration and inspection plans; however, the product data does not state a supplied calibration certificate. How does the 50 mm length affect measurement reliability? The 50 mm shaft offers a balance between reach and stiffness: it minimises deflection while still allowing insertion into many housings and bores for effective verification. What is the recommended application for this gauge pin? The item is intended for go/no‑go checks, plug‑fit verifications and general dimensional referencing in workshop and inspection contexts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.53mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Finish - Metav IndustryLine
The combination of micrometre-level accuracy and a compact workshop design delivers repeatable end-measure checks with minimal setup time; the 8.53 mm diameter and ±0.001 mm tolerance reduce uncertainty in bore verification and fixture setting. Order this precision test pin through Metav Werkzeuge or consult Metav's technical advisors for integration into quality routines. M323.853 gauge pin — 8.53 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.853 gauge pin is a single precision end-measure pin designed for reliable bore checking, jig setting and final-size verification in workshop inspection environments. 8.53 mm diameter, ±0.001 mm tolerance 50 mm length, workshop version Made from special steel Individual delivery, traceable GTIN Micrometre-level accuracy for decisive inspection outcomes The core advantage of this test pin is its ±0.001 mm accuracy, equivalent to 1 µm, which supports tight tolerance verification during final inspection. With such precision, the pin functions as a deterministic reference for bore checks and end-measure comparisons, helping to reduce rework and scrap by giving clear go/no-go information. The numerical tolerance is useful for process documentation and for specifying acceptance criteria in inspection plans, while a compact mass means low thermal inertia during short measurement intervals. Robust workshop design that stands up to daily use Built as a workshop version, the pin is machined from special steel to provide a balance of hardness and handling durability. The 50 mm overall length and slim profile facilitate access into bores and fixtures without excessive bulk, making it suitable for assembly jigs and bench checks. The small mass aids handling and reduces the likelihood of user-induced measurement drift during short manual checks, delivering consistent dimensional references across repetitive tasks. Traceability and easy integration into quality workflows Supplied as an individual test pin with a unique identifier, the item supports traceable measurement records and stock management. The presence of a GTIN and a clear SKU simplifies inventory control and ensures the pin can be referenced in calibration logs and inspection reports. Designed for end-measure verification, the component works well as a fixed reference in fixture build-ups and repeatability tests, helping to accelerate setup times and standardise measurement procedures across production and test stations. Specify the Metav IndustryLine M323.853 for micrometre-level end-measure checks and request tailored advice from Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.853 GTIN: 4061905061745 Label: Prüfstift, einzeln, 8,53 mm, ±0.001 mm, Länge 50 mm Core measurements Diameter: 8.53 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.027 kg Features / Materials Material: Special steel Version: Workshop version Packaging: supplied individually Application: end-measure verification / bore checking FAQ What is the measurement tolerance of this test pin? The M323.853 gauge pin is produced to a tolerance of ±0.001 mm, providing micrometre-level accuracy suitable for tight final-size checks. Which applications suit this gauge pin best? Typical uses include bore verification, jig and fixture setting, and final end-measure comparisons in workshop and inspection tasks. From which material is the pin manufactured? The pin is made from special steel, specified to give the necessary hardness and handling durability for routine workshop use. Is the delivery suitable for traceability in quality processes? Yes; the single-item supply and the included GTIN support traceable inventory and allow straightforward referencing in inspection and calibration records. Can this pin be used for setting jigs and fixture references? The compact 50 mm length and precise diameter make the pin suitable as a deterministic reference in fixture build-ups and repeatability tests. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.54mm Gauge Pin, ±0.001mm, Length 50mm, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, a compact 8.54 mm diameter and sturdy special steel construction for reliable dimension checks and fixture setting; order directly via Metav Werkzeuge or request advice from our consultants. Gauge pin M323.854 – single 8.54 mm inspection pin, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The gauge pin M323.854 is a precision inspection pin designed for exact end-measurements and dimensional verification in workshop and quality‑control environments Precision tolerance ±0.001 mm Diameter 8.54 mm exact fit Length 50 mm workshop version Special steel construction Precision where micrometres matter A tolerance of ±0.001 mm (1 µm) positions this inspection pin in the realm of high‑precision gauging. Such fineness reduces measurement uncertainty when setting up fixtures, checking bore sizes or verifying finished parts; the tight tolerance ensures repeatable reference points and minimises the need for corrective rework. The compact 8.54 mm diameter gives a defined contact area for accurate end‑measurement while the short profile supports stability during insertion and gauging. Robust build for everyday workshop use Constructed from special steel, this workshop‑grade inspection pin is engineered for regular handling and repeated seating in gauges and fixtures. The material choice balances hardness with wear resistance, so the pin maintains its measuring surface over time and use. The single‑piece format provides a stable, vibration‑resistant reference, supporting consistent dimensional checks across production batches and reducing downtime from frequent replacements. Practical applications and efficiency gains Designed for direct measurement tasks, the pin serves as a reference gauge for bore verification, alignment checks and component end‑measurement. Using a dedicated inspection pin simplifies setup procedures and accelerates inspection cycles, delivering measurable productivity benefits: faster checks, fewer stoppages and clearer go/no‑go decision points. The combination of compact form and tight tolerance helps integrate the pin into manual gauging rigs as well as semi‑automated inspection stations. Purchase clarity and supply reliability Product identification and traceability are straightforward: the item is listed under M323.854 with GTIN reference, enabling inventory control and procurement workflows. Sourcing from Metav IndustryLine links this component to a European distribution hub with established stock and dispatch routines, offering continuity for production environments that rely on predictable replenishment and consistent quality. Contact Metav Werkzeuge for expert guidance on the Metav IndustryLine M323.854 and arrange a supply tailored to workshop needs from our Emmerich distribution centre Technical data Article number: M323.854 GTIN: 4061905061752 Brand: Metav IndustryLine Product type: Gauge pin, single Facts Diameter: 8.54 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.027 kg Special features Material: Special steel Workshop version Single piece construction FAQ What is the exact tolerance of this inspection pin? The inspection pin M323.854 has a tolerance of ±0.001 mm, suitable for high‑precision end‑measurements. For which applications is this pin recommended? This gauge pin is recommended for bore verification, fixture alignment and dimensional checks in workshop and quality‑control tasks. Which material is used for the pin? The pin is made from special steel, chosen for wear resistance and stability under repeated use. Is the item traceable for procurement systems? Yes, the item is listed as M323.854 and carries GTIN 4061905061752 to aid stock control and ordering. Can this pin be used in automated inspection cells? The compact diameter and tight tolerance make the pin suitable as a reference element in semi‑automated inspection setups, where precise contact geometry is required. Who supplies this product and where is it shipped from? The product is part of the Metav IndustryLine range and is supplied via Metav Werkzeuge GmbH from Emmerich. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.55mm Test Pin ±0.001mm Length 50mm, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high repeatability, fine tolerance and compact handling for fast in‑line checks; the 8.55 mm diameter and ±0.001 mm tolerance ensure reliable end‑dimension verification while the 50 mm length keeps operation simple and repeatable. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for application guidance. Gauge pin M323.855 — single, 8.55 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The gauge pin M323.855 is a single precision plug gauge designed for end‑dimension verification and routine inspection tasks in workshop and production environments. Workshop version for robust daily use Diameter 8.55 mm with ±0.001 mm accuracy Compact 50 mm length for easy handling Special steel construction for wear resistance Precise end‑dimension verification for production control The short, hardened pin with an exact 8.55 mm nominal diameter and a fine ±0.001 mm tolerance is intended for fast verification of end dimensions and go/no‑go checks. Used as a reference pin at inspection benches or on jigs, the component delivers consistent repeatability even when several checks are required per cycle. The 50 mm active length balances contact stability and accessibility, reducing measurement scatter compared with very short pins while remaining easy to position. This precision level supports quality control processes where micrometre‑level certainty is demanded without resorting to specialised laboratory gauges. Robust handling and reduced inspection time on the shop floor Constructed from special steel, the part is finished to resist abrasion and maintain geometric integrity under routine use. Its workshop version designation indicates practical tolerances for industrial environments and ensures durability when used in fixtures or manual inspection stations. At approximately 0.027 kg, the component is light enough for frequent handling yet substantial enough to avoid accidental displacement during use. The hardened surface improves wear resistance, which reduces the need for frequent replacement and supports consistent throughput in production testing—resulting in measurable time savings during batch inspections. Traceable identification and integration into inventory The pin is provided under SKU M323.855 and carries a GTIN for straightforward inventory control and traceability in quality management systems. As a standardised gauge pin, it integrates easily into existing inspection routines and documentation, supporting audit trails and part history. For complex applications or integration into automated inspection setups, further technical data can be supplied on request to ensure compatibility with fixtures and measurement workflows. The combination of precise tolerance, compact dimensions and industrial finish makes this plug gauge a pragmatic tool for maintaining dimensional conformity across serial production. Contact Metav Werkzeuge for application advice or request a delivery of the Metav IndustryLine gauge pin M323.855 directly from our Emmerich facility. Technical data Article number: M323.855 GTIN: 4061905061769 ECLASS: 21170231 Weight: 0.027 kg Material: Special steel Core specifications Diameter: 8.55 mm Length: 50 mm Tolerance: ±0.001 mm Features Workshop version Single gauge pin for end‑dimension checks Category: Gauge pins (Messstifte) SKU for stock management: M323.855 FAQ What accuracy can be expected from this gauge pin? The gauge pin M323.855 (Metav IndustryLine) is specified with a ±0.001 mm tolerance, suitable for fine inspection tasks and repeat checks on the shop floor. What material is used for the gauge pin? This Metav IndustryLine plug gauge is made from special steel, chosen for wear resistance and stable geometry under routine use. How long is the pin and what diameter does it have? The pin measures 50 mm in length with a nominal diameter of 8.55 mm, dimensions that support secure seating and reliable end‑dimension verification. Can this pin be used in production fixtures and jigs? Yes; the workshop specification and robust finish make the pin appropriate for use in fixtures, manual gauges and many production inspection routines. How is the part identified for inventory and traceability? The item is listed under SKU M323.855 and GTIN 4061905061769, enabling straightforward integration into inventory and quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.56mm Gauge Pin ±0.001mm Length 50mm Workshop Version Special Steel - Metav IndustryLine
Benefit from a compact, workshop-grade measuring solution that combines ±0.001 mm dimensional control, special steel durability and a 50 mm working length for reliable end‑measurements. Order the item directly via Metav Werkzeuge or request tailored application advice from our specialists to ensure seamless integration into inspection routines. M323.856 Gauge Pin — 8.56 mm, ±0.001 mm (Metav IndustryLine) M323.856 is a precision gauge pin designed for verification of bore end dimensions and go/no‑go checks in workshop environments 8.56 mm nominal diameter with ±0.001 mm tolerance 50 mm hardened special-steel shank Workshop-grade finish for robust handling Traceable SKU M323.856 and GTIN 4061905061776 Repeatable results for critical bore checks The core advantage of this precision tool is reproducible dimensional control: the ±0.001 mm tolerance delivers a level of accuracy comparable to high‑precision inspection aids, reducing uncertainty in acceptance testing. With a fine tolerance band, measurement variance is minimised and process decisions—accept, rework or scrap—can be made with confidence. Applied to end‑measurements and verification tasks, the pin supports fast dimensional checks that prevent downstream assembly errors and machining rejects, improving overall production efficiency and lowering scrap rates. Robust workshop design for everyday use Constructed from special steel and finished for workshop handling, the pin combines corrosion resistance with surface integrity to withstand routine use. The 50 mm length balances reach and rigidity, ensuring the pin remains stable during insertion and withdrawal; the compact mass (approx. 0.027 kg) minimises bending and handling fatigue. This construction reduces the risk of deformation under normal inspection forces and preserves long‑term repeatability, so set‑up times are shortened and inspection throughput increases without compromise to measurement quality. Traceability and workflow compatibility Designed as a single measurement element within a structured inspection routine, the gauge pin supports traceable inventory and process documentation. The article is listed under SKU M323.856 and GTIN 4061905061776, enabling straightforward inclusion in asset registers and quality records. As a category member of gauge pins (Messstifte), the component dovetails with standard inspection jigs and fixture checks; labelling and identifiers help maintain audit trails and simplify lot‑based quality reviews. For buyers seeking consistent, workshop‑grade verification tools, this pin offers a pragmatic combination of precision and practical handling. For precise end‑measurements and integration advice, contact Metav Werkzeuge — our Metav IndustryLine experts in Emmerich will confirm suitability and supply the M323.856 directly to your facility Technical data Article number: M323.856 GTIN: 4061905061776 Label: Prüfstift, einzeln, 8,56mm, +/- 0.001 mm Länge 50 mm Core technical data Nominal diameter: 8.56 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.027 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pins (Messstifte) FAQ What is the nominal diameter and tolerance of this gauge pin? The M323.856 gauge pin has a nominal diameter of 8.56 mm and a tolerance of ±0.001 mm for high‑precision checks. What measurement tasks is this pin intended for? Intended for end‑measurements and verification of bore diameters, the device serves as a single precision gauge pin for go/no‑go and fit inspections in workshop environments. What material and finish does the pin have? The pin is made from special steel and features a workshop‑grade finish designed to withstand routine handling while maintaining dimensional stability. How can this item be tracked in inventory and quality records? The product is listed under SKU M323.856 and GTIN 4061905061776 to support traceability, inventory management and audit documentation. How should the pin be handled to preserve accuracy? Keep the pin clean, avoid impacts and store in protective packaging when not in use to preserve surface condition and measurement accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.57mm Gauge Pin Length 50mm ±0.001mm Workshop Finish, Special Steel - Metav IndustryLine
The combination of ultra‑fine tolerance ±0.001 mm, a precise Ø 8.57 mm diameter and a compact 50 mm length makes this gauge pin ideal for reliable end‑measurement and assembly checks; delivered in a transport case for safe handling — order the M323.857 directly via Metav Werkzeuge or consult our specialists for application advice Gauge pin M323.857 — single gauge pin, Ø 8.57 mm, ±0.001 mm, 50 mm (Metav IndustryLine) A gauge pin M323.857 designed as a workshop‑grade test pin for high‑precision end‑measurements, component inspection and go/no‑go verification in production and maintenance environments Tolerance ±0.001 mm Diameter Ø 8.57 mm precision 50 mm length for confined measurements Special steel; workshop version Precision that suits production control This workshop‑grade test pin delivers an exceptionally fine tolerance of ±0.001 mm, which corresponds to one micron accuracy and supports tight quality tolerances in small‑part production. The Ø 8.57 mm diameter is turned and ground for a high‑quality surface finish, reducing measurement uncertainty when used as a reference mandrel or plug for bore checks. Such dimensional stability makes the pin suitable for repeatable end‑measurement tasks and helps maintain consistent inspection results across production batches. Practical design for everyday inspection tasks With a 50 mm length, the pin is compact enough to reach confined bores and to be handled comfortably during manual inspection sequences. The special steel material provides a balance of hardness and wear resistance suitable for workshop use, while the workshop specification ensures robustness under routine handling. Delivered in a transport case for secure movement between toolroom and shop floor, this test pin supports efficient measurement workflows without adding unnecessary handling risk. Clear benefit for quality assurance and assembly Using this single gauge pin simplifies go/no‑go checks and alignment operations, reducing inspection time and lowering the risk of assembly errors. The part functions as a stable reference for end‑dimension control, allowing technicians to verify mating fits and ensure conformity to specified end measurements. Where traceability and repeatability matter, the pin contributes to fewer rejects and a smoother production flow by providing a deterministic reference dimension for quick inspections Choose Metav IndustryLine gauge pins for dependable end‑measurement — contact Metav Werkzeuge GmbH in Emmerich for technical details or to secure units of the M323.857 via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.857 GTIN: 4061905062476 Category: Messstifte Facts Diameter: 8.57 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.027 kg Special features Material: special steel Workshop version Delivered in transport case for safe handling Story trigger: end measurements FAQ What tolerance does the gauge pin offer? The M323.857 gauge pin is specified to a tolerance of ±0.001 mm, providing micron‑level accuracy for fine inspection tasks. Which materials is the pin suitable for checking? The pin itself is made from special steel and is intended as a dimensional reference for metallic and machined components during inspection and assembly. Is the gauge pin suitable for use on the shop floor? Yes, the workshop version of this test pin is designed for routine shop‑floor inspection and is delivered in a transport case to protect it during handling. How should the M323.857 be stored to maintain accuracy? Store the gauge pin in its transport case in a dry environment, away from heavy impacts and strong magnetic fields, to preserve the ground surface and dimensional integrity. Can the pin be used for alignment and go/no‑go checks? Yes, the compact 50 mm length and precise Ø 8.57 mm diameter make the pin well suited to alignment checks and simple go/no‑go verification during assembly Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.58mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Combine the pinpoint ±0.001 mm tolerance with a robust special steel construction and a practical 50 mm length for dependable end‑measurements and repeatable reference checks. Order the item directly via Metav Werkzeuge or consult their specialists for specification support and availability. M323.858 Gauge Pin — 8.58 mm, ±0.001 mm (Metav IndustryLine) The M323.858 is a precision gauge pin intended for end‑measurements and reference checks in workshop environments, engineered for repeatability and robust handling. Tolerance ±0.001 mm for repeatable fits Diameter 8.58 mm ground to size Length 50 mm workshop design Special steel construction for durability Reliability through micrometric accuracy High‑precision production of cylindrical reference parts reduces uncertainty in assembly and inspection processes. The ±0.001 mm tolerance denotes a micrometric clearance that helps to control fits and detect minimal deviations in bores and shafts; this level of accuracy typically lowers scrap rates and shortens adjustment cycles on production lines. By using a reliably ground 8.58 mm calibre, measurement chains gain a stable reference that supports consistent quality control and clear pass/fail criteria. Practical handling designed for workshop routines A compact 50 mm working length keeps the component easy to place and align in tight setups while preserving sufficient engagement for stable checks. The 50 mm form factor combined with the special steel mass offers a balance between tactile handling and thermal stability; short lengths reduce bending effects and improve operator repeatability during manual inspections. The single‑piece construction and workshop specification make this gauge suitable for routine end‑measurements, jig checks and quick go/no‑go verifications at the bench. Where this reference pin adds measurable value Use cases include end‑of‑line inspection, fixture verification and precision toolsetting where a stable reference diameter is required. A hardened, ground gauge pin shortens setup times and supports faster decision making in the metrology loop, which translates into higher throughput and fewer stoppages. The combination of material choice and tolerance provides confidence when matching mating parts, and it integrates readily into existing inspection jigs and comparator fixtures for immediate efficiency gains. Request specification confirmation or delivery options for the Metav IndustryLine gauge pin with ±0.001 mm tolerance from Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.858 GTIN: 4061905062483 Manufacturer: Metav IndustryLine Facts Diameter: 8.58 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.027 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pins / Messstifte Story trigger: endmasse FAQ What is the stated dimensional tolerance? The specified tolerance for the M323.858 gauge pin is ±0.001 mm, providing micrometric repeatability for fit and inspection tasks. Which material is used for the gauge pin? The M323.858 is made from special steel, chosen for wear resistance and dimensional stability under typical workshop conditions. For which applications is this gauge pin suitable? Typical uses include end‑measurements, fixture checks, toolsetting and quick reference checks in production and inspection environments where an 8.58 mm reference is required. Is the item supplied as a single piece or in sets? This entry refers to a single gauge pin supplied individually for dedicated reference and replacement use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.59mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of absolute dimensional control and robust workshop design: a high‑precision 8.59 mm gauge pin with ±0.001 mm tolerance and a 50 mm shaft length provides reproducible end‑size verification for fixtures and gauges. Order or request advice via Metav Werkzeuge for reliable delivery and specification matching. Test pin M323.859 — workshop test pin, 8.59 mm diameter, ±0.001 mm, Metav IndustryLine The Test pin M323.859 is a workshop‑grade gauge pin designed for precise end‑size inspection and fixture alignment in precision engineering and quality control environments. *Precision diameter 8.59 mm ±0.001 *Length 50 mm for fixture compatibility *Workshop version for robust handling *Made from special steel Reproducible readings for stable production control The compact gauge pin delivers ±0.001 mm accuracy, giving a measurable step up from standard inspection tools and reducing uncertainty in pass/fail decisions. With a defined diameter of 8.59 mm, the pin is intended for direct go/no‑go checks and repeatable location tasks, so setup times are shortened and downstream rework is avoided. The tight tolerance supports statistical process control and enables reliable sampling without complex fixtures. Durable workshop design that keeps inspections running Manufactured from special steel, the pin withstands regular handling and offers resistance to wear in routine inspection tasks. The 50 mm shaft length is compatible with common gauge blocks, fixtures and threaded holders, permitting secure seating and stable contact. The workshop specification balances surface hardness and machinability so the pin remains serviceable over many inspection cycles while maintaining dimensional integrity. Micro‑range suitability for fine mechanical applications With a measurement range centred at 8.59 mm, this tool belongs to the micro category of small gauge pins suitable for fine mechanical and precision machining tasks. The compact format keeps handling ergonomic while minimising bending or misalignment during use. In small‑part assembly, instrument set‑up and toolmaking, the pin provides a dependable reference for short‑run verification and fixture checking without the overhead of larger gauge systems. Practical information for procurement and layout planning Delivered as a single gauge pin, the item is straightforward to integrate into existing inspection kits and jigs; its low mass supports rapid indexing and manual handling. The slim profile and workshop finish simplify insertion into tight bores and locating holes. For traceability, the manufacturer SKU and GTIN accompany the product documentation, making stock‑keeping and audit trails easy to maintain. Contact Metav Werkzeuge for tailored advice or to arrange procurement of the Metav IndustryLine test pin M323.859 to ensure compatibility with existing fixtures and inspection routines; local stock and technical consultants are available from Emmerich. Technical Data Article number: M323.859 GTIN: 4061905062490 Brand: Metav IndustryLine Accuracy: ±0.001 mm Diameter: 8.59 mm Length: 50 mm Material: Special steel Weight: 0.027 kg Version: Workshop Facts Diameter (nominal): 8.59 mm Tolerance: ±0.001 mm Shaft length: 50 mm Mass: 0.027 kg Special features Single item delivery Workshop execution End‑size reference application SKU: M323.859 FAQ What tolerance does the test pin provide? The test pin is specified with a tolerance of ±0.001 mm, enabling very fine end‑size verification in inspection routines. Is the pin suitable for fixture alignment in production? Yes; the 50 mm length and workshop design are intended for stable seating in fixtures and for reliable locating during assembly and measurement tasks. Which material is used for the pin? The pin is manufactured from special steel, chosen to balance wear resistance with dimensional stability under routine workshop conditions. Can this gauge pin be used for precision micro‑components? Its nominal 8.59 mm diameter places it in the micro range, making it appropriate for fine mechanical work, small bores and precision fixture checks. How is the product identified for procurement and stock purposes? The product is listed under article number M323.859 and GTIN 4061905062490 for ordering and inventory control. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.5mm Gauge Pin Single, ±0.001mm, 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of uncompromising precision, robust workshop design and the compact 50 mm length for reliable end‑measure checks. The high tolerance of ±0.001 mm ensures reproducible results in fixture alignment and inspection tasks. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.850 — Test pin, Ø 8.50 mm, tolerance ±0.001 mm (Metav IndustryLine) The gauge pin M323.850 is a workshop‑grade test pin intended for end‑measure verification and fixture alignment in production and inspection environments. Workshop‑grade design Diameter 8.50 mm, tolerance ±0.001 mm Length 50 mm for end‑measure verification Manufactured from special steel Traceable accuracy for routine inspection The core advantage of this test pin is its specified ±0.001 mm tolerance, which is reflected in the manufacturing process and final inspection steps. Such a narrow tolerance limits measurement uncertainty and supports consistent pass/fail decisions during in‑process checks. In practice, the pin is used as a stable reference for locating features, checking bore diameters against end‑measure standards and confirming alignment in jigs and fixtures. The clearly defined diameter of 8.50 mm combined with the short, rigid length reduces deflection and ensures a reproducible contact geometry that is compatible with standard inspection protocols. Durable workshop construction for repeatable use Built as a workshop‑grade instrument, this test pin is produced from special steel selected for dimensional stability under repeated handling. The 50 mm length provides a compact working envelope that is easy to position and clamp in common fixture arrangements, while the modest mass supports secure tactile feedback during manual alignment tasks. This combination of material choice and form factor translates into fewer tool changes, less rework and steady throughput on the shop floor, especially where frequent reference checks are part of the process chain. Simple integration into measurement workflows Designed to complement existing inspection equipment, the gauge pin is listed under SKU M323.850 and can be recorded in traceability systems via its GTIN. The pin suits applications such as end‑measure verification, locating studies and fixture setup, where a defined contact surface and tight tolerance are required. Its compact profile means it can be used alongside calipers and bore gauges as a quick reference, speeding up checks without adding complexity to established procedures. For procurement and inventory purposes, the clear identification facilitates rapid replacement and consistent specification across multiple workstations. For procurement or technical guidance on integrating the Metav IndustryLine gauge pin into inspection routines, contact Metav Werkzeuge in Emmerich for tailored advice and reliable delivery Technical data Article number: M323.850 GTIN: 4061905061714 Brand: Metav IndustryLine Material: special steel Facts Diameter: 8.50 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.027 kg Special features Workshop‑grade execution Category: gauge pins (test pins) Application: end‑measure verification, fixture alignment SKU: M323.850 FAQ What tolerance is guaranteed for this gauge pin? The specified tolerance is ±0.001 mm for the gauge pin M323.850, as manufactured under the Metav IndustryLine specification. What are the primary applications for this test pin? This test pin is intended for end‑measure verification and fixture alignment; it serves as a repeatable reference in inspection and setup tasks. Which material is used for the pin and why is that relevant? The pin is manufactured from special steel, chosen to provide dimensional stability and durability for workshop use. Is the 50 mm length suitable for fixture work? The 50 mm length of SKU M323.850 is compact enough for reliable handling and long enough for many locating and end‑measure tasks in jigs and fixtures. How is the part identified for procurement and traceability? Identification is via SKU M323.850 and GTIN 4061905061714; both are suitable for inventory and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.61mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Benefit from the combination of sub‑micron repeatability, robust special steel construction and a compact 50 mm length for reliable end‑measurements in workshop environments; order the gauge pin directly via Metav Werkzeuge or consult our specialists for tailored advice. Gauge pin M323.861 — 8.61 mm, ±0.001 mm, 50 mm (Metav IndustryLine) A gauge pin M323.861 designed for precise end‑measurements and verification tasks in workshop and inspection routines Sub‑micron accuracy ±0.001 mm Compact 50 mm length for tight fixtures Hardened special steel for durable service Workshop version optimised for daily use Reproducible measurements where tolerances matter The compact cylindrical gauge pin offers ±0.001 mm tolerance, a level of precision that supports fine verification work and short‑run inspection. Built from special steel, the pin resists wear and preserves dimensional stability, ensuring that plug and end‑measurements remain consistent over repeated use. This combination reduces rework and supports reliable quality control in machining and assembly processes. Practical form for tight jigs and gauges A 50 mm overall length with an 8.61 mm diameter provides a balance between accessibility and stiffness; the short, rigid design is easier to index in fixtures and reduces bending compared with longer probes. The single, workshop‑grade configuration simplifies handling during set‑up and routine checks, while the compact mass contributes to safe, ergonomic use in a busy production environment. Built for the workshop and traceable inspection chains Supplied as an individual gauge pin, the component is intended for immediate integration into test fixtures or as a reference master for end‑measurements. The robust surface and construction minimise profile change, which together with the tight tolerance contributes to quicker go/no‑go decisions at the control station. For purchases from Metav IndustryLine, procurement and quality teams gain a trusted supply channel that supports uninterrupted measurement routines. For durable, high‑accuracy end‑gauging choose the Metav IndustryLine M323.861 — contact Metav Werkzeuge for purchasing and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.861 GTIN: 4061905062513 Label: Gauge pin, single, 8.61 mm, ±0.001 mm, length 50 mm Dimensions & precision Diameter: 8.61 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.027 kg Materials & features Material: special steel Workshop version Single item supply Compact design for fixture use FAQ What level of precision does this gauge pin offer? The gauge pin M323.861 provides a tolerance of ±0.001 mm, suitable for high‑precision end‑measurements and fine verification tasks in workshop inspection. Is the material suitable for repeated use in a production environment? Yes — the M323.861 is manufactured from special steel and finished for durability, which helps maintain dimensional stability under frequent handling. Can this gauge pin be used in fixture and jig applications? The compact 50 mm length and rigid form factor make this gauge pin well suited for mounting in jigs, fixtures and for use as a reference pin in assembly and test layouts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.62mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise tolerance and robust workshop design for reliable end‑mass checks; the small form factor and low weight allow fast handling and repeatable seating in fixtures. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.862 — 8.62 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.862 is a single, high‑precision test pin designed for end‑dimension verification and go/no‑go seating checks in workshop and inspection environments. Workshop grade construction Diameter 8.62 mm, tolerance ±0.001 mm Length 50 mm for secure locating Made from special steel for durability Precision that secures measurement integrity The gauge pin delivers a certified ±0.001 mm tolerance on an exact 8.62 mm diameter, making it suitable for high‑accuracy end‑dimension checks and plug seating tests. This level of precision minimises rework and rejects in quality control by providing a clear go/no‑go condition for bore and seating features. The compact 50 mm length and low mass contribute to quick thermal stabilisation and reduce measurement drift during short inspection runs, while the solid construction supports repeatable contact conditions. Designed for workshop efficiency and handling Built as a workshop grade tool, the pin combines a compact profile with robust material choice to withstand frequent handling. The slim form permits rapid insertion into gauges and fixtures, speeding up cycle times in busy inspection benches. Thanks to the low weight, the pin seats easily in mandrels and jigs without exerting excessive load on delicate assemblies. Where throughput matters, using a dedicated gauge pin reduces time per check and keeps production moving with consistent results. Traceable quality and applicability in inspection workflows Material choice—special steel—ensures wear resistance under repeated contact while maintaining surface integrity for accurate seating. The item is supplied as a single, individually identifiable pin (SKU M323.862, GTIN 4061905062520), facilitating inventory control and traceability in quality systems. Its specification supports use in a wide range of metrology tasks such as inspecting bore diameters, alignment pins and end‑mass verification in assembly processes; the precise tolerance is particularly valuable where small clearance fits are required. Contact Metav Werkzeuge today to reserve M323.862 for immediate dispatch or to request guidance on integrating this gauge pin into existing inspection routines; Metav Werkzeuge is available for technical consultation and stock queries. Technical Data Article number: M323.862 GTIN: 4061905062520 Material: special steel Net weight: 0.027 kg Length: 50 mm Facts Diameter: 8.62 mm Tolerance: ±0.001 mm Packaging: single item delivery Category: gauge pin / test pin Special features Workshop execution Low mass for quick thermal stabilisation Suitability: end‑dimension and seating checks FAQ What is the exact tolerance of the gauge pin? The gauge pin M323.862 is specified to a tolerance of ±0.001 mm, suitable for fine end‑dimension checks and precise seating verifications. Which materials is this test pin suitable for inspecting? The M323.862 gauge pin is a measurement standard used to verify bores and seating features across typical engineering materials; the pin itself is manufactured from special steel for wear resistance. How should the pin be handled to preserve accuracy? Handle the inspection pin with clean, dry hands or gloves and avoid impacts; store the pin in its transport packaging between uses to protect the surface and preserve the ±0.001 mm tolerance. Is the M323.862 suitable for fixture alignment as well as bore checks? Yes, the 50 mm length and precise 8.62 mm diameter make the pin useful for both alignment and end‑mass seating applications in fixtures and jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.63mm Test Probe ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra-fine tolerance, workshop-ready robustness and compact length for reliable end-measurements in production control; order the test pin directly via Metav Werkzeuge or contact the consultants for specification matching and delivery advice. Test pin M323.863 — precision gauge pin, Ø 8.63 mm, ±0.001 mm (Metav IndustryLine) The Test pin M323.863 is a single, hardened gauge pin designed for precise end-dimension checks and fixture setting across workshop and inspection environments. Workshop version, robust design Diameter 8.63 mm with matched end dimension Tolerance ±0.001 mm high accuracy Supplied in transport case Precision where end dimensions determine part quality The solid cylindrical probe provides ±0.001 mm tolerance, making it suitable where repeatable end measurements are critical. As a compact gauge pin, it reduces uncertainty in go/no‑go checks and setting operations; the true benefit is a consistent reference diameter that shortens inspection cycles and raises confidence in pass/fail decisions. The small mass and short overall length of 50 mm contribute to low thermal drift and easier handling at the bench, so metrology routines run faster and with demonstrably lower scatter. Built for everyday workshop use with measurement-grade material Manufactured from special steel, the component combines surface hardness with corrosion resistance appropriate for routine shop floor use. The workshop version designation indicates a balance of wear resistance and practicality: the probe withstands repeated seating in fixtures and transfer between operators while preserving the calibrated diameter. Where fixed gauges or reference pins are used in assembly jigs, this probe offers longevity and stable contact behaviour, supporting reduced rework and improved production throughput. Practical handling, storage and integration into inspection routines At 8.63 mm nominal diameter and a compact profile, the pin fits common locator holes and standard checking fixtures without modification. Supplied in a transport case, the item arrives protected and ready for immediate use, which simplifies inventory handling and reduces the risk of transit damage. The design supports rapid substitution in measurement benches and is compatible with manual and automated checking setups that require fixed-diameter references for positional or dimensional verification. For immediate specification matching or to request delivery of the M323.863 test pin from Metav IndustryLine, contact Metav Werkzeuge for expert advice and fast dispatch at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.863 GTIN: 4061905062964 Label: Test pin, single, 8.63 mm, ±0.001 mm, length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 8.63 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.027 kg Special features Material: special steel Workshop version Supplied in transport case FAQ What tolerance can be expected from this gauge pin? The M323.863 test pin is specified with a tolerance of ±0.001 mm, providing the fine dimensional control required for precise end-measurements. Is the probe suitable for fixture setting and go/no‑go checks? Yes, the compact geometry and stable diameter of the gauge pin make it well suited to fixture setting and go/no‑go applications in both production and inspection contexts. What material is the pin made from and how does that affect wear? The pin is made from special steel; this gives good wear resistance for routine workshop use while maintaining dimensional stability over repeated contact cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com