Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
8.88mm Gauge Pin, Precision ±0.001mm, Length 50mm, Workshop Version, Special Steel, Delivered in Case - Metav IndustryLine
Combine workshop-grade construction, an exact diameter of 8.88 mm and a tolerance of ±0.001 mm to secure reproducible end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or contact our consultants for integration advice. Gauge pin M323.888 — precision 8.88 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.888 is a single inspection pin designed for fast and reliable end‑dimension verification in workshop and inspection settings. Workshop-grade precision ±0.001 mm Diameter 8.88 mm ground to tolerance Length 50 mm for reliable seating Supplied in protective box for transport High-precision measurement for repeatable checks The ±0.001 mm specification corresponds to a one‑micrometre class tolerance, providing the kind of accuracy expected for critical end‑dimension verification. Ground to a nominal 8.88 mm diameter and finished with tight form control, this inspection pin delivers consistent fit‑checks and seating verification across production lots. By using a dedicated pin gauge, measurement uncertainty linked to filler or loose reference probes is reduced, which supports improved first‑pass yield and traceable control charts. Robust workshop design that eases handling and storage Built as a workshop‑grade item from special steel, the pin is sized to 50 mm length to guarantee stable engagement in bores and mating parts during checking. The compact single‑pin format simplifies handling on the bench and in jigs while the lightweight construction keeps operator fatigue low during repetitive tests. Supplied in a protective transport box, the pin stays protected from knocks and corrosion during storage and transit, preserving the ground surface until the moment of use. Integration into inspection routines and operational benefits As a specialist end‑dimension reference, this inspection pin supports rapid go/no‑go assessments and numerical recording when paired with optical or tactile measuring equipment. The reproducible geometry of the pin aids process capability studies and reduces rework by catching deviations early. Sourcing from a supplier with a European quality hub ensures consistent availability and helps maintain uninterrupted inspection throughput for small and medium production runs. Contact Metav Werkzeuge today to specify the M323.888 gauge pin for workshop inspection tasks and receive tailored advice on adopting it into existing quality routines. Technical data Article number: M323.888 GTIN: 4061905064487 Label: Gauge pin, single, 8.88 mm, ±0.001 mm, length 50 mm Facts Diameter: 8.88 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.028 kg Special features Workshop version Material: special steel Supplied in protective case for transport Single gauge pin Application: end‑dimension checks FAQ What level of accuracy does this gauge pin provide? The M323.888 gauge pin provides an accuracy of ±0.001 mm (one micrometre class), suitable for precise end‑dimension checks in workshop and inspection environments. Is the pin suitable for routine fit checks in production? Yes, the inspection pin is designed for repeated seating and fit verification; the 50 mm length and ground diameter support quick go/no‑go assessments and repeatable results. How is the gauge pin delivered and protected in transit? The Metav IndustryLine gauge pin is supplied in a protective transport case to prevent damage and preserve the ground measuring surface during storage and shipment. Which materials is the pin made from and how does that affect use? The pin is manufactured from special steel, offering a resilient measuring surface and resistance to wear under normal workshop handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.89mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
Benefit from micron-level repeatability, a robust special-steel construction and a compact 50 mm length for dependable end measurements and fit checks; these features help reduce rework and speed up inspection cycles. Order the part directly via Metav Werkzeuge or consult our application specialists for tailored advice. Gauge pin M323.889 — single gauge pin, Ø 8.89 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A single gauge pin, the M323.889, designed for precise end‑measurements and repeatable fit checks in workshop and production inspection. Micron-level accuracy ±0.001 mm Workshop-grade special steel construction Compact 50 mm length for tight spaces Single-piece for unambiguous reference measurement Precision that keeps inspection consistent The Gauge pin M323.889 delivers ±0.001 mm tolerance, equating to micron-level accuracy that supports reliable go/no‑go assessments and tight tolerance verifications. This level of precision reduces the risk of part rejection by providing a stable reference for end measurements and clearance checks. The narrow tolerance helps to standardise inspection results, improving process control and lowering the incidence of costly rework. Durable construction for repeatable measurements Manufactured from special steel, the pin offers dimensional stability and resistance to wear in routine shop use, making it suitable for frequent insertion and extraction operations. The workshop‑grade finish ensures good surface integrity, which preserves measurement consistency over time. The compact 50 mm length balances accessibility in confined fixtures with sufficient engagement for secure reference measurements. Practical integration into quality workflows The cylindrical geometry and exact diameter of 8.89 mm make the pin ideal for checking bore sizes, verifying mating part fits and confirming end dimensions during assembly. As a single, clearly defined reference element, it simplifies fixture design and reduces interpretation errors during manual inspection. The lightweight nature supports easy handling while maintaining stiffness needed for dependable measurements. Traceability and identification for inventory control Supplied under SKU M323.889, the component is straightforward to catalogue and manage within an inspection kit or tool crib. Clear marking and consistent manufacturing tolerances aid inventory tracking and repeat procurement. Using standardised gauge pins as references contributes to reproducible results across shifts and operators, supporting both internal quality assurance and external audits. Contact Metav Werkzeuge for application guidance and to secure the M323.889 for precise fit and end‑measurement tasks—Metav Werkzeuge is available to advise on integration into existing inspection setups Technical data Article number: M323.889 GTIN: 4061905065002 Brand: Metav IndustryLine Facts Diameter: 8.89 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.028 kg Special features Material: Special steel Version: Workshop execution Packaging: supplied as a single gauge pin ECLASS: 21170231 FAQ What tolerance does this gauge pin provide? The gauge pin M323.889 is manufactured to a tolerance of ±0.001 mm, suitable for micron‑level checks and tight fit verifications. For which applications is this probe most suitable? This single gauge pin is intended for end measurements, bore checks and mating‑part fit tests in workshop and production inspection tasks. What material is the pin made from and why does it matter? The M323.889 is made from special steel, offering dimensional stability and wear resistance for repeated inspection use. How is the part identified for inventory and ordering? This component is listed under SKU M323.889 and GTIN 4061905065002 for straightforward procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.8mm Gauge Pin Single ±0.001 mm Length 50 mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of high metrological accuracy, robust workshop design and compact length for fast, repeatable bore checks; order the spare part directly via Metav Werkzeuge or consult the specialists if clarification is needed. Gauge pin M323.880 — 8.80 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.880 is a single precision pin designed for accurate bore verification and end‑measure references in workshop inspection and assembly tasks. High‑precision tolerance ±0.001 mm Diameter ground to 8.80 mm 50 mm length for compact checks Special steel construction for workshop use Precision where it matters This gauge pin delivers repeatable measurement thanks to a tight production tolerance of ±0.001 mm, making it suitable for fine inspection work and reference checking of finished bores. The slim profile and 50 mm length keep handling straightforward while ensuring sufficient engagement for most compact bore gauges and fixture checks. Machining and quality teams benefit from fewer false rejects and reduced rework because a reliable reference pin reduces measurement uncertainty at the point of inspection. Robust design for everyday workshop use Manufactured in special steel and specified as a workshop version, the component withstands routine handling on shop floors and in inspection benches. The material choice supports longevity under repeated insertion and withdrawal cycles, while the single‑piece delivery format simplifies inventory management for quality departments. Where process stability is required, this pin forms a concise tool for go/no‑go comparisons and end‑measure references without introducing unnecessary complexity into the measuring routine. Integration into inspection workflows As a calibrated reference element for bore checks and end‑measure comparisons, the gauge pin supports quick verification steps during set‑up and final inspection. Its nominal 8.80 mm diameter is compatible with common bore tolerances in small components and fixtures; the precise dimensioning helps align measuring instruments and confirm machining results. For teams seeking dependable, fast checks, the pin acts as a simple, low‑overhead device that complements digital and analogue inspection tools, improving throughput without compromising accuracy. Contact Metav Werkzeuge for application advice or to secure the M323.880 for your inspection kit — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com and benefit from local stock and technical guidance Technical data Article number: M323.880 GTIN: 4061905063930 Brand: Metav IndustryLine Facts Nominal diameter: 8.80 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.028 kg Accuracy class: ±0.001 Special features Workshop version Material: special steel Single gauge pin delivery Intended for end‑measure and bore verification FAQ What level of accuracy does this gauge pin provide? The gauge pin M323.880 provides a dimensional tolerance of ±0.001 mm, suitable for high‑precision inspection and reference use in workshop environments. Which materials is the pin made from and why does that matter? Made from special steel, the pin offers robustness against wear from repeated use and stable dimensional behaviour during routine inspections. Is this pin suitable for go/no‑go checks on small bores? Yes — with a nominal 8.80 mm diameter and precise tolerance, the pin is intended for quick go/no‑go and end‑measure comparisons in compact components. How is the pin supplied and identified? The item is supplied as a single gauge pin and is identified by the SKU M323.880 and GTIN 4061905063930 for easy stock control. Can this pin be used as a reference for set‑ups and fixture alignment? Indeed. The gauge pin’s consistent diameter and tight tolerance make it a practical reference for set‑up verification and fixture alignment during production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.91mm Gauge Pin, ±0.001mm Precision, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise fit verification and reliable workshop performance with this single gauge pin: 8.91 mm diameter, ±0.001 mm tolerance and 50 mm length combine to reduce rework and speed up quality checks. Order directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.891 — Single precision plug gauge, Ø 8.91 mm, ±0.001 mm (Metav IndustryLine) Gauge pin M323.891 is a single precision plug gauge intended for end‑measurement and go/no‑go fit checks in inspection and production Diameter 8.91 mm, tolerance ±0.001 mm Robust special steel construction Length 50 mm for deeper seat checks Workshop version for frequent use Precision that ensures reproducible fit checks A consistently tight tolerance is the foundation of efficient quality control. This gauge pin delivers a declared tolerance of ±0.001 mm (1 µm), enabling clear go/no‑go decisions and reducing ambiguous rejects. The fine tolerance makes the pin suitable for high‑accuracy inspection tasks, where reproducibility across repeated measurements preserves batch quality and shortens inspection cycles. The clear numerical specification supports traceable acceptance criteria for production. Durable construction for workshop environments Manufactured from special steel, the pin is designed for regular handling and contact with mating bores. The workshop version means surface finish and heat treatment have been selected to withstand frequent use while maintaining the measured diameter. At a mass of 0.029 kg and a length of 50 mm, the pin is easy to position for deeper seat checks without compromising rigidity, supporting faster, safer handling at the inspection bench. Practical applications and compatibility in metrology setups This single plug gauge is intended for end‑masses and fit verification in assembly and incoming inspection. Typical uses include acceptance checks of bored holes, fixture validation and successor checks in serial production. The clear specification (Ø 8.91 mm, ±0.001 mm) makes it suitable as a reference gauge in comparison benches or as a dedicated tool within a gauge set. Traceability is supported by the provided article details and GTIN for inventory systems. For reliable, workshop‑ready precision from Metav IndustryLine, contact Metav Werkzeuge for procurement and application guidance — Metav Werkzeuge will advise on integrating this gauge pin into existing inspection routines and supply logistics. Technical data Article number: M323.891 GTIN: 4061905065026 Label: Prüfstift, einzeln, 8,91mm, +/- 0.001 mm Länge 50 mm Numbers / Core technical data Diameter: 8.91 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.029 kg ECLASS: 21170231 Designs / Special features Material: special steel Feature: workshop execution Application: end‑measurement / fit checks Item: single gauge pin FAQ What level of precision does this gauge pin provide? The gauge pin M323.891 offers a precision of ±0.001 mm (1 µm), specified for consistent go/no‑go fit verification in inspection tasks. Which material is the pin made from and how does that affect durability? Constructed from special steel, the pin is suited to workshop use where repeated contact and handling are expected; the material selection supports wear resistance and dimensional stability. Can this pin be used for deeper bore checks? Yes — with a 50 mm length the pin is appropriate for deeper seat inspections and application in fixtures requiring extended reach. Is this item supplied as part of a set or as a single piece? This product is supplied as a single gauge pin (single item) under article number M323.891 for targeted inspection tasks. How does the pin support traceability in inventory systems? The product is identified by article number M323.891 and GTIN 4061905065026, allowing straightforward logging and traceability in procurement and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.92mm Go/No-Go Gauge Pin ±0.001mm 50mm Workshop Version in Special Steel, Supplied in Case - Metav IndustryLine
Taking advantage of ±0.001 mm accuracy, a stable 8.92 mm diameter and a compact 50 mm length ensures reliable end‑dimension checks and repeatable go/no‑go verification. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.892 Gauge Pin 8.92 mm, ±0.001 mm (Workshop Version) — Metav IndustryLine The M323.892 gauge pin is a workshop‑grade precision test pin designed for end‑dimension verification and fine measurement tasks in production and quality control. Precision tolerance ±0.001 mm Diameter 8.92 mm, length 50 mm Workshop version for robust use Special steel construction Reliable accuracy for critical small‑part checks The compact test pin delivers repeatable precision at a tight tolerance of ±0.001 mm, making it suitable for final size validation and calibration routines where every micron counts. The very small tolerance reduces measurement uncertainty and supports confident go/no‑go decisions in assembly and inspection stages. For users less familiar with metrology terms: this accuracy level means the pin’s diameter will vary by no more than one thousandth of a millimetre, which is typical for high‑precision gauging in toolmaking and component inspection. Durable workshop execution that withstands daily use Built as a workshop version, this gauge pin combines compact form with robust construction. Manufactured from special steel, it offers dimensional stability under regular handling and repeat checks. The compact 50 mm length and slim profile suit bench rigs and small fixtures, while the overall design supports quick placement and removal during batch inspections. The tool’s design emphasises practicality and longevity for everyday shop floor workflows. Integrates into standard inspection processes Optimised for end‑dimension checks, the pin functions well as a master reference in go/no‑go sequences and comparative testing. It can be used directly in pin jigs, plug gauges, and alignment fixtures to confirm bore sizes or mating part fit. Where traceable calibration is required, Metav can advise on calibration options and documentation to match inspection protocols. Using a defined precision pin like this reduces downtime from ambiguous measurements and supports consistent quality decisions in production. Practical handling and measurement benefits The gauge pin’s balanced geometry supports stable seating in bores and ensures minimal run‑out during measurement. Its compact weight and size make it easy to store in instrument trays and to handle with one hand during rapid checks. The overall specification prioritises clarity of result and repeatability, which simplifies operator training and helps maintain process capability within tight tolerances. For operations focusing on repeatable end‑dimension control, the pin is a straightforward component that enhances measurement confidence. Contact Metav Werkzeuge in Emmerich for tailored application advice or to request detailed specification sheets for the M323.892 gauge pin; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.892 GTIN: 4061905065033 Brand: Metav IndustryLine Core specifications Diameter: 8.92 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.029 kg Special features Material: Special steel Version: Workshop execution Application: End‑dimension checks Category: Gauge pin (messstifte) FAQ What inspection tasks is this gauge pin suited for? The M323.892 gauge pin is intended for end‑dimension checks, go/no‑go verification and comparative bore testing in production and workshop inspection routines. Can the pin be used as a master reference in jigs? Yes. The gauge pin’s precise 8.92 mm diameter and tight ±0.001 mm tolerance make it suitable as a master reference in jig and fixture applications. Is the material specified for heavy‑duty environments? The pin is made from special steel, chosen for dimensional stability and suitability for regular workshop use; specific environmental suitability should be checked against the intended working conditions. How does the pin help reduce measurement uncertainty? By providing a stable, repeatable diameter with ±0.001 mm tolerance, the pin minimises variability in manual checks and supports consistent go/no‑go decisions across repeated measurements. What alternatives exist for different diameters or lengths? Metav IndustryLine offers a range of gauge pins and measurement accessories; consult product catalogues or our specialists to match diameter and length to specific inspection requirements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.93mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of high repeatability, micrometre-level tolerance and a compact 50 mm length for reliable end‑dimension checks in workshop and inspection routines. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.893 — Ø 8.93 mm, ±0.001 mm, Length 50 mm (Metav IndustryLine) The gauge pin M323.893 is a single precision pin designed for end‑dimension verification, fixture setting and gauging in workshop and inspection environments. Precision tolerance ±0.001 mm Diameter Ø 8.93 mm Workshop-ready design Compact 50 mm length Consistent micrometre accuracy for critical checks Manufactured for demanding metrology tasks, this pin offers ±0.001 mm tolerance across its working length. The very small tolerance converts directly into high repeatability when used for end‑measurements or plug gauges, reducing the need for corrective rework and improving throughput in quality departments. Where dimensional stability matters, a defined diameter of 8.93 mm eliminates ambiguity in pass/fail checks and supports standardised inspection routines. Robust construction that withstands daily use Produced from special steel and engineered as a workshop version, the pin resists wear while maintaining contact surface integrity. The 50 mm length balances accessibility and stiffness, making the pin easy to handle in fixture setups without compromising measurement stability. This compact form factor suits busy benches and production lines where quick, repeatable gauging is required and tool robustness prevents frequent replacements. Designed to integrate with inspection workflows As a single gauge pin, the component fits into common fixture bores and checking assemblies, supporting accurate fixture alignment and end‑dimension control. The clear SKU and traceability simplify inventory and process documentation; traceable items like this slot into calibrated sets or bespoke gauges. Using such defined reference pins streamlines inspection protocols and contributes to measurable quality improvements in serial production. Reliability aligned with trusted supply Sourced from Metav IndustryLine, the pin benefits from the distributor’s role as a European quality filter: a broad product range, dependable logistics and longstanding technical expertise. That practical backing means repeatable supply and component consistency for workshops and small industrial operators, helping to minimise procurement risk and ensure steady production capability. For precision applications requiring micrometre stability, contact Metav Werkzeuge to discuss the M323.893 gauge pin and confirm suitability for specific fixtures or inspection processes; local supply is coordinated from Emmerich for rapid delivery to the workshop. Technical data SKU: M323.893 GTIN: 4061905065927 Brand: Metav IndustryLine Label: Gauge pin, single, 8.93 mm, ±0.001 mm, Length 50 mm Facts Diameter: 8.93 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.029 kg Special features Material: Special steel Workshop version Single precision gauge pin Application: end‑dimension checks, fixture gauging FAQ What is the primary application for this gauge pin? The M323.893 gauge pin is intended for end‑dimension verification, fixture setting and plug‑gauging tasks in workshop and inspection contexts. How precise is the pin and what does that mean in practice? With a tolerance of ±0.001 mm the gauge pin provides micrometre‑level conformity that supports repeatable pass/fail decisions and reduces measurement uncertainty in routine checks. Which material is the pin made from and how does that affect durability? The pin is made from special steel, chosen for surface hardness and wear resistance to ensure long service life under regular contact loading. Can the pin be used for fixture alignment and gauging sets? Yes, the single gauge pin is suitable for fixture alignment and can be integrated into gauging sets or used as a reference plug for assembly checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.94mm Gauge Pin ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Benefit from the combination of submicron accuracy, robust special steel construction and a compact 50 mm length for reliable end‑measurement and calibration tasks; order the gauge pin directly via Metav Werkzeuge or consult our technical team for application advice. Gauge pin M323.894 — Precision test pin, Ø 8.94 mm, ±0.001 mm A gauge pin M323.894 designed for precise end‑measurements, fixture verification and calibration tasks in workshop and inspection environments. *±0.001 mm tolerance for submicron precision *Ø 8.94 mm hardened special steel *Length 50 mm for compact test and calibration *Workshop version with transport case included Reduce measurement uncertainty with micron‑grade tolerance The central benefit of this test pin is its ±0.001 mm tolerance, which translates to true submicron repeatability for end‑measurements and limit checks. Such fine accuracy reduces rework and non‑conformance in production processes by making pass/fail decisions more reliable. When used as a reference pin in gauges or as a setting master in fixtures, the stable nominal diameter means fewer measurement variables and a clearer statistical basis for quality control. Compact format and robust materials for routine workshop use At 50 mm overall length and a nominal diameter of Ø 8.94 mm, this pin offers a compact footprint that is easy to handle while still providing the stiffness required for repeatable contact probing. Manufactured from special steel, the pin resists wear and maintains form under typical shop conditions; the specified workshop variant is intended for daily inspection tasks. Delivery in a protective transport case preserves the calibrated surface during storage and transit, supporting consistent performance across inspection cycles. Practical application across gauges, fixtures and inspection benches This precision pin is suited to end‑measurements, go/no‑go checks, insertion into bore gages and as a master for comparator setups. The tight tolerance makes it a reliable datum when verifying mating parts or confirming bore diameters during assembly checks. For metrology labs and production inspection, the combination of compact size and high accuracy enables integration into both portable test kits and bench measurement stations, helping to streamline quality workflows and reduce measurement downtime. For assured submicron accuracy and workshop‑ready handling, request the Metav IndustryLine gauge pin via Metav Werkzeuge or contact our specialists for dimension checks and compatibility advice Technical data Article number: M323.894 GTIN: 4061905065934 Label: Prüfstift, einzeln, 8,94mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 8.94 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.029 kg Special features Material: Special steel Workshop version Delivered in transport case Intended use: end‑measurements and calibration FAQ What material is the gauge pin made from? The gauge pin M323.894 is made from special steel, chosen for wear resistance and dimensional stability in workshop inspection use. Is the stated tolerance of ±0.001 mm achievable in routine use? Yes; the ±0.001 mm tolerance represents the manufactured accuracy of the gauge pin M323.894 and supports submicron repeatability when handled and stored correctly. Can this pin be used as a reference in fixture setting? Yes; the compact 50 mm length and precise nominal diameter make the pin suitable as a reference master for fixtures and comparator checks. Does the product come with protective packaging? The gauge pin is supplied in a protective transport case to safeguard the calibrated surface during storage and transport. What inspection tasks suit this test pin best? Typical applications include end‑measurements, go/no‑go checks, bore verification and use as a master in gauge sets or comparator stations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.95mm Gauge Pin, Single, ±0.001 mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
High‑precision 8.95 mm gauge pin with ±0.001 mm tolerance and a 50 mm usable length provides consistent end‑measurements and reliable repeatability in workshop inspection routines; robust special steel and workshop finish ensure long service life. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Pin gauge M323.895 — 8.95 mm, ±0.001 mm (50 mm length) — Metav IndustryLine A pin gauge M323.895 designed for precision end‑measurements and inspection tasks in small‑component and workshop metrology environments ±0.001 mm tolerance for exact end measurements Diameter 8.95 mm in precision ground finish 50 mm usable length for deep features Supplied in a protective transport case Accuracy that cuts rework and saves inspection time High resolution and minimal deviation are decisive in batch inspection. The ±0.001 mm tolerance of this gauge pin translates into repeatable checks of bores, shafts and end‑dimensions with micrometric certainty, reducing the risk of scrap and rework. In practical terms, a tight tolerance means fewer secondary checks and faster decision making on the shop floor; inspections become a reliable pass/fail gate rather than a time‑consuming doubt. The measurable benefit is predictable quality output and streamlined production control. Built for workshop use — durable, stable and easy to handle Constructed from special steel and finished for workshop conditions, the pin offers mechanical resilience and resistance to everyday wear. The 50 mm nominal length provides access into deeper features while maintaining stiffness for stable contact; the item’s low mass supports quick handling and minimal thermal drift during short measurement cycles. Supplied in a protective transport case, the component remains protected during storage and transport, helping to preserve the ground surface and dimensional integrity between uses. Practical integration into inspection workflows As an individual gauge pin supplied singularly, the component fits directly into established measuring routines: plug checks, gauge blocks, comparator set‑ups and visual inspection jigs. Classed for fine‑component measurement, the diameter 8.95 mm is suitable for micro‑scale metrology tasks where compact, high‑precision tooling is required. Traceability is supported by the SKU and GTIN data for inventory and quality records, enabling smooth logging in calibration and asset management systems. For adapters or bespoke fixtures, the pin’s standard geometry simplifies mechanical integration. Contact Metav Werkzeuge for tailored application advice on the M323.895 pin gauge and guidance on integrating it into existing inspection setups — reach our specialists in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M323.895 GTIN: 4061905061998 Manufacturer: Metav IndustryLine Facts Diameter: 8.95 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.029 kg Special features Material: special steel Workshop finish Single gauge pin delivery Supplied in a protective transport case FAQ What tolerance does the pin provide? The pin gauge M323.895 is specified at ±0.001 mm, making it suitable for micrometric end‑measurements. What material is used for this gauge pin? The M323.895 is made from special steel and finished for workshop use to ensure wear resistance and dimensional stability. Is the pin suitable for deep bores or recessed features? Yes, the 50 mm usable length offers access into deeper features while preserving stiffness for repeatable contact. How is the component supplied and protected in transit? The gauge pin is supplied individually and comes in a protective transport case to maintain the ground surface and prevent handling damage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.96mm Test Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of sub‑micrometre accuracy and workshop‑ready construction for reliable end‑dimension checks; the ±0.001 mm tolerance and Ø 8.96 mm diameter ensure clear go/no‑go decisions in inspection routines. Order the pin directly via Metav Werkzeuge or ask the consultants for specification advice. Gauge pin M323.896 — single precision pin, Ø 8.96 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.896 is a single precision pin intended for end‑dimension verification and fixture alignment in workshop and inspection environments. Single precision gauge pin Ø 8.96 mm Tolerance ±0.001 mm for micrometric control Length 50 mm suited to standard fixtures Made from special steel, workshop edition Precision that secures inspection decisions With a declared tolerance of ±0.001 mm, this single pin provides a measurable step up from conventional workshop gauges and supports objective acceptance criteria for small‑bore and end‑dimension checks. The tight tolerance reduces ambiguity during pass/fail assessments and shortens decision loops in quality control. For practical terms, the Ø 8.96 mm size fits fine‑bore verification tasks where nominal‑to‑actual conformity must be documented; the clearly defined accuracy helps to lower rework rates and stabilise production yields. Durability and handling optimised for routine use Engineered as a workshop edition, the pin is produced from special steel to offer resistance against everyday wear in inspection benches and setup tooling. The 50 mm length provides adequate engagement in most fixture arrangements while retaining a compact form that is straightforward to handle and store. With a modest mass of 0.029 kg, the single‑piece design keeps handling predictable and repeatable, contributing to consistent measurement technique and reduced operator influence on results. Traceability and workflow benefits for quality teams The clearly specified dimensions and material make the pin straightforward to include in inspection plans and measurement records. Identification via SKU and GTIN supports traceability in procurement and stock systems, while the defined tolerance simplifies incorporation into documented verification procedures for end‑dimension (end‑mass) checks. The pin functions as a precise mechanical reference that complements optical or electronic measurement methods, lending a cost‑effective option for routine acceptance testing in engineering and toolroom environments. Contact Metav Werkzeuge to specify the M323.896 gauge pin for precise end‑dimension verification and secure supply from Emmerich’s specialist stock Technical Data Article number: M323.896 GTIN: 4061905062001 Label: Gauge pin, single, 8.96 mm, ±0.001 mm, length 50 mm Weight: 0.029 kg Facts Diameter: 8.96 mm Tolerance: ±0.001 mm Length: 50 mm Special features Material: Special steel Workshop edition Single piece gauge pin FAQ What tolerance does this gauge pin offer? The gauge pin is specified with a tolerance of ±0.001 mm, suitable for high‑precision end‑dimension checks. What are the exact dimensions of the pin? The pin measures Ø 8.96 mm in diameter with a length of 50 mm (SKU M323.896, GTIN 4061905062001). Which material is used for this tool? The pin is made from special steel and is provided in a workshop edition suitable for regular inspection use. For which applications is this pin intended? Typical uses include end‑dimension verification, fixture alignment and go/no‑go checking in precision engineering and workshop quality control. Is calibration information provided with the product data? The supplied product information does not specify a calibration certificate or standard; calibration status is not indicated in the data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.97mm Gauge Pin Length 50mm ±0.001mm Workshop Finish - Metav IndustryLine
Benefit from ultra‑tight tolerance and workshop‑ready durability: the probe combines ±0.001 mm repeatability with a precise 8.97 mm diameter and a 50 mm length for reliable end‑dimension checks. Secure procurement and application support are available through Metav Werkzeuge for quick integration into inspection routines. M323.897 gauge pin – Ø 8.97 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.897 gauge pin is a single, workshop‑grade probe designed for exact end‑measure verification and fixture alignment in production and inspection environments Workshop version for robust handling Diameter 8.97 mm, tolerance ±0.001 mm Length 50 mm in special steel Consistent precision for critical end‑dimensions A measured tolerance of ±0.001 mm makes this gauge pin suitable where narrow clearances and repeatable results are mandatory. The tight tolerance reduces uncertainty in acceptance testing and avoids time lost to ambiguous measurements. By using a hardened, form‑stable probe, organisations reduce the need for repeated rework and can trust that assembly trials and final inspection report consistent measurement outcomes. Built to withstand workshop conditions Manufactured from special steel, the probe is engineered for wear resistance and dimensional stability under frequent handling. The 50 mm length provides a practical reach for many fixture and jig checks while keeping the probe easy to manipulate by hand or with holding fixtures. The compact mass (approx. 0.029 kg) minimises influence on delicate assemblies and supports secure placement in standard gauge blocks or alignment tools, ensuring longevity and dependable repeatability. Streamlined inspection and integration into workflows Designed as a single‑use probe for targeted checks, the component supports fast setup in production loops and laboratory benches alike. Integration into existing gauge sets and inspection routines is straightforward thanks to the standard diameter and clear specification; this shortens inspection cycles and improves throughput without compromising on quality assurance. The traceable SKU and GTIN simplify inventory control and traceability for calibrated assets. Contact Metav Werkzeuge for application advice or to request the M323.897 gauge pin with its ±0.001 mm tolerance and workshop configuration Technical data Article number: M323.897 GTIN: 4061905062018 Brand: Metav IndustryLine Category: Gauge pins Numbers / Core technical data Diameter: 8.97 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.029 kg Designs / Special features Workshop version (robust handling) Material: special steel Single probe item for end‑dimension checks Story trigger: end dimensions FAQ What tolerance does the gauge pin offer? The tolerance is ±0.001 mm for the M323.897 gauge pin, specified for high‑precision end‑dimension verification. What material is used for the probe? The probe is made from special steel, chosen for wear resistance and dimensional stability under repeated use. What typical tasks is this probe suited for? The component is intended for end‑measure checks, fixture alignment and targeted verification in workshop and production inspection workflows. Which identifiers simplify inventory and traceability? The SKU M323.897 and GTIN 4061905062018 are provided for clear stock control and product traceability. Is the probe suitable for integration into existing gauge sets? Yes, the standard diameter and defined length enable straightforward use with common gauge blocks and inspection jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.98mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Combine ±0.001 mm accuracy with a ø 8.98 mm diameter and a robust special steel construction to secure reliable end‑measure checks and repeatable inspection results. Order the gauge pin directly via Metav Werkzeuge or ask our consultants for application advice. Gauge pin M323.898 — single precision test pin, ø 8.98 mm, ±0.001 mm, 50 mm (Metav IndustryLine) The gauge pin M323.898 is a single precision test pin designed for end‑measure and fit verification in workshop and inspection routines Workshop design for robust industrial use Diameter ø 8.98 mm with ±0.001 mm tolerance 50 mm length for end‑measure and fit checks Supplied in protective case for transport Accuracy that reduces rework and inspection time The instrument delivers a ±0.001 mm clearance specification, which makes it suitable for high‑precision gauge tasks where traceable repeatability matters. With a snug ø 8.98 mm shaft and a 50 mm shaft length, the component enables confident pass/fail checks on mating bores and end faces. The tight tolerance shortens decision cycles during production control and lowers scrap rates by identifying marginal fits early in the process. The precision specification is expressed in industry terms familiar to metrology teams and quality engineers. Robust workshop design for everyday industrial use Built from special steel, the test pin is optimised for frequent handling in a workshop environment and resists the wear typical of small contact gauges. The workshop version features a compact geometry that is easy to seat and hold for manual inspections, yet substantial enough to withstand repeated insertion and extraction. Supplied in a protective case, the pin remains protected during transport and storage, which preserves the measuring surface and helps maintain measured accuracy between uses. Practical handling and inspection benefits As a single test pin, this item streamlines standard end‑measure tasks and complements plug gauge sets or comparator fixtures. The clean geometry simplifies alignment and reduces measuring variability introduced by imperfect seating. The modest mass and compact length aid one‑hand operation where rapid inspection cycles are required. Integration into inspection routines is straightforward: store the pin in its case when not in use, use simple visual and tactile checks before measurement, and rely on the specified tolerance to classify mating parts quickly and objectively. Contact Metav Werkzeuge for application guidance, supply options and to secure the M323.898 gauge pin for workshop inspection tasks — Metav’s specialists will advise on compatibility and handling Technical data Article number: M323.898 GTIN: 4061905062025 Category: Gauge pins (Messstifte) Brand: Metav IndustryLine Core specifications Diameter: 8.98 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.029 kg Materials & features Material: Special steel Version: Workshop execution Delivery: Supplied in protective case for transport Intended use: End‑measure and fit verification FAQ What tolerance does the gauge pin offer? The gauge pin M323.898 provides an accuracy of ±0.001 mm, making it suitable for fine end‑measure and fit checks. Is the pin suitable for routine bore inspections? Yes. The ø 8.98 mm diameter and 50 mm length of this Metav IndustryLine test pin are designed for routine bore and fit verification in workshop inspection workflows. What material is used for the test pin? The M323.898 is manufactured from special steel, selected for wear resistance in frequent handling and measurement tasks. How is the gauge pin delivered and stored? The gauge pin is supplied in a protective case for transport and storage to maintain the measuring surface and preserve accuracy. Can the gauge pin replace part of a plug gauge set? The single precision pin is appropriate for targeted checks and can complement existing plug gauge sets or be used standalone for specific end‑measure tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.99mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Grade - Metav IndustryLine
Combine ±0.001 mm tolerance with an exact 8.99 mm diameter and a robust 50 mm length for dependable end‑measure checks in workshop and inspection tasks; order directly via Metav Werkzeuge or consult our specialists for application guidance. Gauge pin, single, 8.99 mm — ±0.001 mm accuracy (Metav IndustryLine) A gauge pin, single, 8.99 mm designed as a workshop‑grade reference for precise limit, fit and end‑measure checks in inspection, assembly and gauging applications Workshop-grade precision ±0.001 mm Diameter 8.99 mm tolerance class Length 50 mm for end‑measure checks Special steel for wear resistance Consistent dimensional accuracy for decision‑making Machining and assembly processes benefit from a tactile, measurable reference. The gauge pin delivers ±0.001 mm tolerance at an 8.99 mm diameter, enabling high precision pass/fail checks and repeatable fit verification. The fine tolerance reduces uncertainty in go/no‑go decisions, so inspection cycles run faster and scrap rates fall. Highlighted here is the practical advantage: a compact, predictable standard that supports efficient quality control and shortens throughput times. Durable design for regular workshop use Constructed from special steel, the component resists wear while maintaining surface integrity under frequent contact. The 50 mm length gives sufficient contact area for axial seating and ensures stable handling during insertion and withdrawal. The workshop version balances hardness and toughness to withstand everyday handling on benches and in fixtures; this results in extended service intervals and lower replacement frequency, which improves operational uptime. Easy integration into inspection routines The component is supplied as a single precision element, making it straightforward to introduce into existing gauging fixtures or measurement routines. With a low mass and compact geometry, the pin suits manual checking and fixture mounting alike, promoting repeatability across operators and shifts. Traceable dimension and material consistency minimise measurement variability and support systematic quality documentation when used as a master reference in production checks. Discuss the application suitability with Metav Werkzeuge and request a tailored recommendation for Metav IndustryLine gauge pins (SKU M323.899) to ensure the correct reference component for specific inspection and assembly tasks Technical data SKU: M323.899 GTIN: 4061905062032 Weight: 0.029 kg Numbers / Core technical data Diameter: 8.99 mm Length: 50 mm Tolerance: ±0.001 mm Design / Special features Material: Special steel Pack: single item Feature: Workshop version FAQ What tolerance does this gauge pin hold? The Metav IndustryLine gauge pin (SKU M323.899) is manufactured to a tolerance of ±0.001 mm for precise go/no‑go and fit checks. Which material is used for the pin? The gauge pin is made from special steel, selected to combine surface hardness with wear resistance suitable for frequent workshop use. What applications suit this type of pin? This precision element is intended for end‑measure checks, fit verification and limit gauging in inspection and assembly processes where an 8.99 mm reference is required. How should the pin be handled to preserve accuracy? Handle the Metav IndustryLine gauge pin with clean hands or gloves, store in a dry environment and avoid impacts; regular visual inspection for wear will help retain measurement consistency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.9mm Gauge Pin, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of extreme dimensional accuracy, robust workshop design and protective transport packaging for reliable inspection routines; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.890 — 8.90 mm, ±0.001 mm, length 50 mm The Gauge pin M323.890 is a single, precision cylindrical test pin designed for end‑dimension verification and tight-tolerance checks in workshop inspection and assembly environments. Precision diameter 8.90 mm ±0.001 mm Length 50 mm for deeper bore and slot checks Workshop design for robust, repeatable use Made from special steel Accuracy that reduces rework and inspection time A diameter tolerance of ±0.001 mm combined with a nominal 8.90 mm diameter ensures highly repeatable reference measurements for go/no‑go testing and end‑measure verification. The exceptionally fine tolerance minimises uncertainty in pass/fail decisions and reduces rework cycles. By using a hardened, wear-resistant special steel pin as a stable reference, measurement variance caused by tool wear is reduced and inspection throughput improves. Designed for routine workshop handling and durability The workshop version construction balances stiffness and handling ease for everyday use in production environments. With a 50 mm overall length the pin reaches deeper bores and internal features while remaining easy to grip and position. Supplied as a single item and finished for robust contact, the pin resists deformation under regular handling, providing a durable reference that maintains its dimensional integrity over many inspection cycles. Practical integration and traceable handling Supplied in a protective transport case, the pin is ready for use on the inspection bench and protected during storage and transit. The single‑item supply simplifies inventory management for precision sets and special checks. The visible GTIN and clear article labelling support traceability for quality records and make the pin straightforward to reference in work instructions and inspection plans. Confidence through proven supply and workshop focus Sourcing from a specialist workshop range provides confidence that the component was specified for frequent use and practical environments rather than merely for lab demonstration. The combination of precision tolerance, robust material and protective packaging delivers a dependable tool for quality control tasks where accuracy and repeatability are decisive. Contact Metav Werkzeuge in Emmerich for tailored advice on using the M323.890 in inspection setups or to request detailed technical comparisons with other gauge sizes — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.890 GTIN: 4061905065019 Manufacturer: Metav IndustryLine Facts Diameter: 8.90 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.029 kg Special features Workshop version Material: special steel Supplied individually Delivered in protective case for transport FAQ What accuracy can be expected from this gauge pin? The gauge pin M323.890 is specified with a tolerance of ±0.001 mm, providing the high repeatability required for strict end‑measure checks and tight tolerance inspections. Is the pin suitable for repeated use in a busy workshop? Yes, the workshop version and special steel construction make the M323.890 suitable for frequent handling and routine quality control tasks without rapid wear. Can this pin reach internal features in deeper components? With a 50 mm overall length the pin is designed for deeper bore and slot checks where a short reference pin would not suffice. How is the product delivered and protected? The gauge pin is supplied individually and shipped in a protective transport case to prevent damage in transit and during storage. Is the M323.890 traceable for quality documentation? Yes, the product is clearly labelled and identified by its article number and GTIN, facilitating traceability and inclusion in inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8mm Gauge Pin 50mm Length ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of one‑micron accuracy, robust special steel construction and workshop‑ready handling for dependable in‑process checks; order the item directly via Metav Werkzeuge or contact our consultants for specification advice. M323.800 — Precision gauge pin, 8.00 mm, ±0.001 mm The M323.800 is a single precision gauge pin designed for end‑measurement and go/no‑go verification tasks in inspection benches and toolrooms. 8.00 mm nominal diameter, ±0.001 mm tolerance 50 mm usable length, workshop version Special steel for stable dimensional performance Supplied in protective transport case Consistent one‑micrometre accuracy for repeatable inspection results The gauge pin delivers a tolerance of ±0.001 mm (1 µm), which places it in the high‑precision range for routine dimensional verification. This level of accuracy reduces measurement uncertainty when checking mating bores, pin fits or end faces, enabling faster decision‑making on the shop floor and fewer downstream rework cycles. The 8.00 mm nominal diameter is produced to tight run‑out and concentricity standards, so each check contributes to a reproducible quality record rather than a single isolated measurement. Durable workshop construction that keeps gauges in service Manufactured in special steel, the pin is built for the demands of a production‑oriented environment while retaining metrological stability. The workshop version combines hardened surfaces with corrosion‑resistant finishing to withstand handling and routine use; this reduces the frequency of replacement and supports continuous production. Supplied in a protective transport case, the item arrives ready for safe storage and transit, lowering the risk of accidental damage and preserving the calibrated state between uses. Practical form factor for efficient handling and traceability With a usable length of 50 mm, the pin balances reach with rigidity, making it suitable for inspection fixtures and hand checks alike. As a single gauge pin, it integrates easily into pin gauges or fixture arrays for comparative measurements and end‑dimension verification. Traceability is supported through the included identifiers: M323.800 is supplied with a GTIN, aiding inventory control and quality documentation in regulated production environments. The compact weight and simple geometry also make it convenient to seat and remove without specialised tooling. For precision tasks that demand one‑micron reliability, contact Metav Werkzeuge to discuss how the Metav IndustryLine M323.800 gauge pin can be integrated into your inspection routine and supply chain. Technical data Article number: M323.800 GTIN: 4061905063121 Material: Special steel Nominal diameter: 8.00 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.024 kg Version: Workshop execution Packaging: Supplied in protective transport case Facts Diameter: 8.00 mm Accuracy: ±0.001 mm Usable length: 50 mm Weight: 0.024 kg Special features Single gauge pin for end‑measure checks Robust shop‑floor design Corrosion‑resistant finishing GTIN for traceability FAQ What is the intended use of this gauge pin? The M323.800 gauge pin is intended for end‑measurement, fit verification and reference checks on bores and corresponding mating parts in inspection and production settings. How precise is the M323.800 and what does ±0.001 mm mean in practice? A tolerance of ±0.001 mm denotes one‑micrometre precision; in practice this supports fine inspection limits and reduces ambiguity when validating tight fits or critical diameters. Is the pin suitable for routine shop‑floor use? Yes, the workshop execution and special steel construction ensure the pin withstands regular handling while maintaining dimensional stability. Does the product include protective packaging? The gauge pin is supplied in a protective transport case to prevent damage during storage and transport and to preserve measurement integrity. Can the M323.800 be used with inspection fixtures? The 50 mm usable length and standard geometry allow the pin to be mounted or seated in fixture arrays and pin gauge blocks for comparative and reference measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8–9mm Gauge Pin Set 100 Pieces 70mm Step 0.01mm Special Steel, Case - Metav IndustryLine
Data inconsistency detected: the product designation states "100 pieces" while the item count indicates 101; please verify the source data before generating a product description. This discrepancy may lead to confusion or errors in the final product listing, potentially impacting customer trust and satisfaction. It is crucial to ensure that the source data is accurate and consistent across all fields to avoid misrepresentation. Double-check the inventory records, product labels, and any associated documentation to confirm the correct quantity. Addressing this issue promptly will help maintain the integrity of the product description and prevent any misunderstandings during the sales process.
8–9mm Gauge Pin Set 21-Piece 70mm Step 0.05mm, Special Steel In Plastic Case - Metav IndustryLine
Take advantage of the combination of high repeatability, robust special steel construction and compact handling for reliable bore inspection — order the set directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin set M318.828 — 21-piece inspection pins, 8.00–9.00 mm, 0.05 mm steps (Metav IndustryLine) The Gauge pin set M318.828 is a 21-piece inspection set designed for fast, accurate bore checking and go/no-go verification in metalworking and quality control. 21 precision pins in 0.05 mm steps Diameter range 8.00–9.00 mm 70 mm length for deeper bore checks Supplied in protective case Precision that shortens inspection cycles This inspection set was developed to increase throughput in routine quality checks by offering consistent spacings and a fine 0.05 mm step size. The graduated diameters enable quick identification of nominal and out-of-tolerance bores, reducing the need for repeated measurements with callipers or micrometres. Thanks to the set’s narrow increments and sturdy design, measurement time is reduced while traceability of results is maintained. Robust material for workshop conditions Manufactured from special steel, each pin resists wear during repeated use, providing stable diameters over extended service life. The combination of hardness and surface finish supports reliable contact fit without rapid deterioration, which benefits maintenance intervals and lowers the total cost of ownership in production or toolroom environments. The material choice also ensures compatibility with common engineering metals when used for verification tasks. Practical geometry for real-world checks With a length of 70 mm, the pins reach into deeper bores where shorter gauges cannot, enabling checks of sleeves, housings and stepped bores. The compact set format of 21 pieces covers the range 8.00–9.00 mm in close increments, allowing stepwise selection for precise sizing. The clear grading supports efficient workflows in assembly, inspection benches and tool preset stations, reducing handling time and the likelihood of measurement errors. Organisation and transport made simple The set is supplied in a protective case suitable for transport and safe storage, keeping pins organised and preventing accidental damage. A compact case is particularly useful for mobile inspection or shared inspection points across production lines, helping to preserve accuracy by avoiding mixed or damaged gauges. The complete set is ready for immediate use on the shop floor or in the inspection room. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine gauge pin set M318.828 — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability for specific bore-tolerance tasks Technical data Article number: M318.828 GTIN: 4054469182001 Manufacturer: Metav IndustryLine Facts Diameter range: 8.00–9.00 mm Increment / step: 0.05 mm Length: 70 mm Pieces per set: 21 Weight: 1.32 kg Special features Material: special steel Supplied in protective transport case Application category: inspection gauges FAQ What sizes are included in the set? The gauge pin set M318.828 (Metav IndustryLine) contains pins covering the diameter range 8.00–9.00 mm in 0.05 mm increments. Are the pins suitable for use on hardened components? Pins in the M318.828 set are made of special steel and are intended for standard verification tasks; for repeated use against very hard surfaces, please consider application-specific wear assessments. Can this set be used for deep bore checks? Yes, the 70 mm pin length is designed to reach deeper bores and sleeves where shorter pins would be insufficient. Is the set supplied ready for transport and storage? The complete 21-piece set is supplied in a protective case for transport and organised storage, protecting the pins from damage. Which applications suit this pin set best? The set is optimised for routine bore inspection, go/no-go verification and quick size checking in machine shops, toolrooms and quality-control stations; refer to M318.828 (Metav IndustryLine) for workshop use Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8–9mm Probe Holder For Test Pins Eloxated Aluminium Green One-Sided - Metav IndustryLine
Benefit from the anodised aluminium construction and the precise fit for 8–9 mm measuring pins, combined with a compact 76 mm length that eases integration into fixtures. Order the Measuring Pin Holder GO, 8–9 mm, green one-sided mount directly via Metav Werkzeuge or ask our consultants if needed. Measuring Pin Holder GO, 8–9 mm — green one-sided mount (Metav IndustryLine) The Measuring Pin Holder GO, 8–9 mm is a compact, anodised aluminium receptacle designed to take measuring pins of 8–9 mm diameter for use in gauge fixtures and test jigs. Aluminium, anodised body Fits measuring pins 8–9 mm One-sided green receptacle for orientation Durable, corrosion-resistant construction for workshop use The holder is manufactured from aluminium and finished with an anodised surface to provide long-term resistance to wear and corrosion while keeping weight to a minimum. This combination of lightness and surface protection reduces handling fatigue during repeated assembly tasks and maintains a consistent contact surface for the mounted pins. The robust finish supports routine shopfloor environments and contributes to reproducible performance in gauge assemblies where stable mounting is essential. Precision fit for repeatable measuring results Designed specifically for 8–9 mm measuring pins, the mount ensures a secure, low‑play fit that helps to eliminate lateral movement and wobble during measurements. A stable seating for the pin translates into repeatable positioning within fixtures and test jigs, which in turn reduces measurement scatter and inspection rework. The accurate interface between holder and pin makes this component suitable for metrology fixtures where consistent alignment contributes to reliable pass/fail decisions. Compact dimensions that simplify integration into fixtures With a nominal length of 76 mm and a width of 16 mm, the holder occupies minimal space while providing sufficient engagement for common gauge layouts. The one-sided green receptacle offers immediate visual coding for GO applications and simplifies assembly orientation during batch set-up. Its compact footprint allows use in confined gauge plates and measuring fixtures without requiring significant redesign of existing mounts. Practical choice for gauges, jigs and workshop tooling As a purpose-built receptacle for measuring pins, this holder suits small to medium gauge builds, inspection benches and dedicated test fixtures where a clear GO indication and a durable mounting point are required. The anodised aluminium body provides corrosion resistance without adding unnecessary mass, and the colour coding supports fast identification during production checks. Supplied as an individual component for fixture builders and maintenance teams, it integrates with standard pin diameters to streamline assembly and reduce downtime. Contact Metav Werkzeuge today in Emmerich for supply and advice — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss how this holder can be integrated into existing gauge assemblies Technical data Article number: M318.566.9 Manufacturer: Metav IndustryLine Material: aluminium, anodised Function: for mounting measuring pins Colour: green Dimensions & measurable data Length: 76 mm Width: 16 mm Compatible pin diameter: 8–9 mm SKU: M318.566.9 Special features Anodised aluminium construction Green colour coding for GO applications One-sided receptacle for clear orientation Compact footprint for fixture integration FAQ What pin diameters are compatible with this holder? The holder accepts measuring pins with a diameter of 8–9 mm, making it suitable for standard pins used in many gauge fixtures; reference SKU M318.566.9 for ordering. What is the material and finish of the holder? The component is made from aluminium with an anodised surface finish to improve wear and corrosion resistance. Is the receptacle suitable for GO/NO‑GO colour coding? Yes, the green one‑sided receptacle is intended for GO indication and helps with quick visual identification during inspections. Can this holder be integrated into existing gauge plates and jigs? Its compact dimensions (76 mm × 16 mm) and secure pin seating make the mount appropriate for straightforward integration into gauge layouts and test jigs; product M318.566.9 is supplied as an individual mounting component. Which applications is this holder best suited for? This holder is intended for gauge assemblies, inspection fixtures and workshop tooling where stable pin seating and clear GO orientation are required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8–9mm Probe Holder For Test Pins, Aluminium Anodised Red, Single-Sided - Metav IndustryLine
Take advantage of the anodised aluminium construction and the secure, one-sided red mounting to speed up fixture setup and ensure repeatable positioning for 8–9 mm measuring pins; order the holder directly via Metav Werkzeuge or ask the consultants for matching accessories and mounting tips. Measuring Pin Holder NOGO (8–9 mm, red, one-sided) — Metav IndustryLine The Measuring Pin Holder NOGO (8–9 mm) is a compact, anodised aluminium mount designed to accept single measuring pins for inspection jigs and gauge fixtures. Anodised aluminium construction For measuring pins 8–9 mm One-sided red mounting for visual ID Compact 76 mm profile for tight fixtures Faster, more consistent inspection cycles with secure pin mounting The holder provides a reliable seating for measuring pins, enabling repeatable positioning that reduces setup variation during routine checks. By using anodised aluminium, the mount combines low weight with a corrosion-resistant surface, which keeps handling simple while maintaining dimensional stability. The red, one-sided capture reduces assembly time by making the reference side clearly visible, so alignment and exchange of measuring pins are faster and less error-prone. Compact design that integrates into existing fixtures and jigs With a slim profile and short footprint, the component is suited for tight spaces in inspection benches and bespoke gauges. The compact 76 mm length and 16 mm width minimise intrusion into assemblies while offering enough support for standard measuring pins in the 8–9 mm range. This balance between reach and rigidity helps to preserve measurement quality without requiring extensive fixture redesign, which in turn improves workshop throughput and shortens changeover times. Built for workshop conditions and long-term reliability The simple construction focuses on robust performance and low maintenance: the anodised surface resists everyday wear and keeps contamination to a minimum, while the single-sided orientation allows quick visual identification across batches. As a practical accessory for metrology setups, the holder supports efficient inspection workflows and reduces the likelihood of misplacement or incorrect insertion of measuring pins, contributing to consistent quality control across production runs. For a dependable red anodised measuring pin holder from Metav IndustryLine, contact Metav Werkzeuge to arrange supply or technical matching to existing fixtures in Emmerich. Technical data Article number: M318.567.9 Manufacturer: Metav IndustryLine Colour: red Material: aluminium, anodised Application: for measuring pins 8–9 mm Dimensions & data Length: 76 mm Width: 16 mm SKU: M318.567.9 Features One-sided red mounting for quick identification Designed to accept measuring pins ø 8–9 mm Compact profile for confined fixtures Corrosion-resistant anodised finish FAQ Is the holder compatible with all measuring pins of 8–9 mm diameter? The holder is designed for measuring pins with a nominal diameter of 8–9 mm and provides a secure seating; compatibility depends on the pin head geometry, so standard straight shank pins in that range are suitable. Can the mount be used in customised gauge assemblies? Yes, the compact design and slim profile make the holder easy to integrate into bespoke gauges and inspection jigs where a one-sided, visible mounting is required. Does the anodised surface require special maintenance? Routine cleaning with a lint-free cloth is sufficient; the anodised aluminium finish offers resistance to wear and corrosion under normal workshop conditions. Is this product suitable for repetitive production environments? The robust construction and clear visual identification of the red one-sided mount make it well suited to repetitive inspection tasks and quick pin changes in production workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9 mm Gauge Pin Single, ±0.001 mm Accuracy, 50 mm Length, Workshop Version - Metav IndustryLine
The 9.00 mm single pin gauge delivers a highly stable reference with an exceptionally fine ±0.001 mm tolerance and a 50 mm overall length, making it suitable for precise setting and inspection tasks in confined assemblies. The workshop-grade construction and special-steel body ensure long service life and consistent repeatability; order directly via Metav Werkzeuge or consult the Metav team for application advice. Pin gauge (single) 9.00 mm, ±0.001 mm – 50 mm length (Metav IndustryLine) The Pin gauge, single 9.00 mm is a compact, high-precision reference pin designed for inspection, go/no-go checks and dimensional setting tasks in workshop metrology. ±0.001 mm tolerance for reference accuracy Nominal diameter 9.00 mm 50 mm hardened special steel body Workshop-grade finish for daily use Engineered for repeatable reference measurements The instrument is specified with a ±0.001 mm tolerance, which positions it as a precision reference for fine inspection tasks where minimal uncertainty is required. This level of deviation corresponds to sub-micron alignment expectations in many production checks and calibration routines; the tight tolerance reduces adjustment iterations and supports faster verification cycles. The compact 9.00 mm nominal diameter combined with a 50 mm overall length provides a stable contact feature that resists lateral play during insertion, improving repeatability when used as a reference pin or setting master. Built for dependable use in workshop environments Constructed from special steel and finished for workshop use, the device stands up to frequent handling and routine measurement work. The workshop specification indicates enhanced surface quality and dimensional stability under practical conditions, supporting a consistent reference point over repeated cycles. The robust construction translates directly into lower rework rates and fewer measurement uncertainties during setup, which supports efficient machining and quality-control workflows without compromising on precision. Measurement context and typical applications This single pin is intended for end-measurement roles such as reference checking of bores, alignment of gauges, and insertion verification in assemblies. In these contexts the gauge provides a precise datum for comparative measurements and functional go/no-go testing. Its attributes make it suitable for use in small-part inspection, tool-setting processes and precision jigs where space is limited but measurement fidelity remains critical. As a workshop-grade reference pin it complements inspection equipment and can be integrated into daily quality checks to uphold process reliability. Choose the Metav IndustryLine single 9.00 mm pin gauge for a compact, traceable reference solution; contact Metav Werkzeuge in Emmerich for tailored advice and procurement assistance. Technical data Article number: M323.900 GTIN: 4061905062049 Item: Pin gauge, single, 9.00 mm, ±0.001 mm, 50 mm length Facts Diameter: 9.00 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.029 kg Special features Material: special steel Workshop version Accuracy class: ±0.001 mm ECLASS: 21170231 FAQ What is the declared tolerance of this pin gauge? The pin gauge is specified with a ±0.001 mm tolerance, providing a fine reference for precision inspection and setting tasks. Which tasks are suited to this 9.00 mm pin gauge? The gauge is intended for end-measurements, bore checks, insertion verification and tool-setting where a compact, stable reference is required. What material is used for the gauge and what does that mean for durability? Manufactured from special steel, the pin gauge offers workshop-grade resistance to wear and maintains dimensional stability under normal handling and inspection cycles. Is this pin gauge suitable for use in confined assemblies? Yes, the compact nominal diameter and 50 mm length make it suitable for confined spaces where a precise reference pin is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9,01- 10,00mm Messstift-Sätze, Werkstatt-Ausführung, ± 0,004 mm
- aus Spezial-Stahl Werkstatt-Ausführung, Länge 50 mm Genauigkeit < ± 0,004 mm im Behältnis/KastenTechnische Daten- Messbereich: 9,01- 10,00mm- Stufung: 0,01mm- Anzahl/Satz: 100
9,54mm Prüfstift, Länge 50mm, ±0,001mm, Werkstatt-Ausführung - Metav IndustryLine
Der hohe Präzisionsgrad ±0,001 mm, die Länge 50 mm und die robuste Werkstatt‑Ausführung bieten reproduzierbare Endmaße für feinmechanische Fertigungen; Bestellen Sie den Prüfstift direkt über Metav Werkzeuge oder kontaktieren Sie unsere Beratung bei Bedarf. Prüfstift, einzeln, 9,54mm, +/- 0.001 mm Länge 50 mm – Präzisions‑Prüfstift von Metav IndustryLine Der Prüfstift, einzeln, 9,54mm, +/- 0.001 mm Länge 50 mm ist ein kompaktes Endmaß für präzise Kontrollmessungen in Werkstatt und Fertigung und eignet sich besonders für feinmechanische Bauteile. Extrem präzise Toleranz ±0,001 mm Robuste Ausführung aus Spezial‑Stahl Länge 50 mm für Endmaß‑Prüfungen Werkstatt‑Ausführung für den Dauereinsatz Lieferung in stabilem Transportkasten Präzision und Material für reproduzierbare Endmaße Der Prüfstift zeichnet sich durch eine Toleranz von ±0,001 mm aus, wodurch er anspruchsvolle Messaufgaben in der Fertigungs‑ und Prüfprozessen zuverlässig erfüllt. Das verwendete Spezial‑Stahl sorgt für hohe Verschleißfestigkeit und Maßhaltigkeit auch bei häufiger Nutzung. Durch die kompakte Länge 50 mm und das geringe Gewicht 0,032 kg bleibt das Handhabungsgewicht niedrig, was präzise Lagerung des Prüfstifts und reproduzierbare Ergebnisse bei wiederholten Kontrollen erleichtert. Die Kombination aus Materialwahl und Fertigungsgenauigkeit minimiert Einflüsse durch Umgebungsbedingungen auf das Messergebnis. Einsatzgebiete und Anwendernutzen in der Werkstatt Dieses Messwerkzeug ist für die Anwendung in der Feinmechanik, im Maschinenbau und in der Qualitätskontrolle konzipiert. Dank seiner kompakten Abmessungen eignet es sich ideal für Prüfplätze, Lehren sowie Endmaßkontrollen kleiner Bauteile und Spannmittel. Die Werkstatt‑Ausführung macht den Prüfstift robust gegenüber täglichem Gebrauch, wodurch sich die Nutzungsdauer verlängert und Stillstandzeiten wegen Ersatzbeschaffung reduziert werden. Anwender erhalten so ein praxisorientiertes Werkzeug für wiederkehrende Prüfzyklen. Messcharakteristik und Einordnung Mit einem Messbereich von 9,54 mm ordnet sich der Prüfstift in den Mikro‑Bereich für feinmechanische Arbeiten ein; dieses Format bietet auf kleinem Raum hohe Steifigkeit und geringe Verwölbung. Die spezifizierte Genauigkeit bewegt das Produkt in einen Bereich, der deutlich über typischen industriellen Mechanik‑Standards liegt und sich für präzise Endmaß‑Kontrollen eignet. Für Anwender, die reproduzierbare Messergebnisse erwarten, ist die Kombination aus kompaktem Format und hoher Genauigkeit ein entscheidender Vorteil. Verpackung, Lieferung und Pflegehinweise Der Prüfstift wird sicher verpackt geliefert; die Lieferung erfolgt in einem stabilen Transportkasten, der den Schutz beim Versand gewährleistet und die sichere Aufbewahrung bis zum Einsatz ermöglicht. Zur Erhaltung der Präzision empfiehlt sich eine sachgerechte Lagerung in trockener Umgebung sowie gelegentliche Reinigung mit geeignetem Lösemittel und leichter Ölung der Oberfläche. Die robuste Bauweise reduziert den Pflegeaufwand und unterstützt langfristige Einsatzbereitschaft. Empfehlung: Setzen Sie auf die Präzision von Metav IndustryLine und beziehen Sie den Prüfstift direkt über Metav Werkzeuge; bei Fragen hilft die technische Beratung unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 weiter. Produktmerkmale Artikelnummer: M323.954 Marke: Metav IndustryLine Bezeichnung: Prüfstift, einzeln, 9,54mm, +/- 0.001 mm Länge 50 mm GTIN: 4061905065897 Material: Spezial-Stahl Gewicht: 0.032 kg Fakten Länge: 50 mm Messbereich: 9.54 mm Genauigkeit: ±0,001 mm Besonderheiten Werkstatt-Ausführung Lieferung in Transportkasten EClass: 21170231 FAQ Wie genau ist der Prüfstift und für welche Prüfungen eignet er sich? Der Prüfstift von Metav IndustryLine (Prüfstift, einzeln, 9,54mm, +/- 0.001 mm Länge 50 mm, SKU M323.954) bietet eine Genauigkeit von ±0,001 mm und eignet sich speziell für Endmaß‑Kontrollen und präzise Prüfaufgaben in der Feinmechanik und Qualitätskontrolle. In welchem Bereich liegt der Messumfang dieses Prüfstifts? Der Messumfang beträgt 9,54 mm; damit gehört das Produkt in den Mikro‑Bereich für kompakte, hochpräzise Messaufgaben und ist besonders geeignet für kleine Bauteile und präzise Prüflehren. Aus welchem Material besteht der Prüfstift und welche Vorteile hat das? Der Prüfstift besteht aus Spezial‑Stahl, was eine hohe Verschleißfestigkeit und Maßstabilität gewährleistet; das Material unterstützt konstante Messergebnisse auch bei häufiger Benutzung in der Werkstatt. Wird der Prüfstift kalibriert geliefert oder ist eine Kalibrierung erforderlich? Für dieses Produkt liegt keine Angabe zu einer speziellen Kalibrierung nach ISO 17025 vor; daher erfolgt die Lieferung standardmäßig ohne ISO‑17025‑Kalibrierschein. Bei Bedarf kann die Kalibrierung über die technische Beratung von Metav Werkzeuge geklärt werden. Wie wird der Prüfstift geliefert und ist eine sichere Aufbewahrung vorgesehen? Der Prüfstift wird in einem stabilen Transportkasten geliefert, der Schutz beim Versand bietet und eine sichere Aufbewahrung ermöglicht; die robuste Verpackung reduziert Transportschäden und erleichtert das Handling in der Werkstatt. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9-10mm Probe Holder For 0.1–1mm Pins Red Single-Sided Aluminium Eloxated - Metav IndustryLine
The combination of a compact 9–10 mm NOGO socket, anodised aluminium construction, and compatibility with 0.1–1.0 mm measuring pins ensures fast, repeatable no‑go checks in small-batch inspection routines; order directly via Metav Werkzeuge or contact our consultants for specification support. Measuring‑pin Holder NOGO 9–10 mm — one‑sided red socket (Metav IndustryLine) The Measuring‑pin Holder NOGO 9–10 mm secures 0.1–1.0 mm measuring pins in a red, anodised aluminium socket for precise go/no‑go gauging and bench inspection tasks. Anodised aluminium body for corrosion resistance Red one-sided socket for quick visual ID Accepts measuring pins 0.1–1.0 mm Compact 9–10 mm NOGO diameter Fast, dependable gauging for routine inspection The one‑sided NOGO holder is engineered for consistent limiting checks where rapid verification of maximum clearances is required. Fitted to accept 0.1–1.0 mm measuring pins, the accessory turns small‑pin gauges into ready‑to‑use go/no‑go fixtures, reducing setup time on the inspection bench. The red socket provides an immediate visual cue, helping to prevent mix‑ups during repetitive measurement runs. Compatibility with standard probe pins makes integration into existing gauge rigs straightforward and keeps throughput high. Robust yet lightweight construction for everyday use Manufactured from anodised aluminium, the holder balances low weight with sufficient rigidity for manual handling and frequent manipulation. With a compact length of 76 mm and a width of 17 mm, it fits neatly into modular inspection assemblies and pocketed tool cases without adding bulk. The finish resists corrosion and abrasion, which preserves seating accuracy over many cycles and minimises the need for replacement parts. This durability directly contributes to less downtime and more predictable inspection intervals. Designed to integrate into metrology workflows As a dedicated gauge accessory, the holder supports standardised checking procedures and simplifies training for workshop staff. The marked NOGO 9–10 mm function enables immediate acceptance or rejection decisions, improving process control and traceability in small‑component production. Backed by the Metav IndustryLine product family, the component serves as a pragmatic addition to calibration trays and fixture arrays, streamlining the transition from measurement to quality documentation without complex adaptation. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine measuring‑pin holder can be fitted into existing inspection fixtures — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M318.567.10 Manufacturer: Metav IndustryLine Facts Length: 76 mm Width: 17 mm NOGO diameter: 9–10 mm Acceptance for measuring pins: 0.1–1.0 mm Special features For uptake of measuring pins Made from anodised aluminium Red one‑sided socket Suitable for go/no‑go checks Compact format for fixture integration FAQ What is the primary purpose of this holder? The measuring‑pin holder is intended to hold 0.1–1.0 mm probe pins for NOGO (no‑go) checks, enabling quick go/no‑go verification with the Metav IndustryLine holder M318.567.10. Which pin sizes are compatible with the holder? The accessory accepts measuring pins in the 0.1–1.0 mm range and is optimised for small‑diameter pins used in detailed inspection tasks. Is the socket one‑ or two‑sided and what does that mean for use? The holder has a one‑sided red socket configured as a NOGO stop; it is used where a single limiting check is required rather than a paired go/no‑go assembly. What material and finish are used on the holder? The holder is produced from anodised aluminium, offering low weight with corrosion resistance to maintain seating accuracy during repeated use. Can the holder be used in automated fixtures? Yes, the compact form factor and standard pin acceptance make the holder suitable for incorporation into manual and semi‑automated inspection fixtures as part of a larger gauging system. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9-10mm Test Pin Holder Double-Sided Green/Red, For 0.1–1mm Pins - Metav IndustryLine
Taking advantage of a compact, double-sided Go/No-Go design and anodised aluminium construction, this holder speeds up pass/fail checks while remaining durable and lightweight; order directly via Metav Werkzeuge or consult our advisors for tailored selection. Measuring pin holder GO/No-Go 9–10 mm, double-sided — Metav IndustryLine, anodised aluminium Measuring pin holder GO-NOGO, 9–10 mm double-sided is a compact aluminium fixture for quick pass/fail inspection tasks on production benches and QC stations. Double-sided Go/No-Go indication Anodised aluminium for corrosion resistance Accepts measuring pins 0.1–1 mm Compact size 90 × 17 mm for bench use Faster pass/fail inspection with fewer errors The double-sided Go/No-Go configuration provides an immediate visual decision for small-diameter checks, reducing cycle time for repetitive controls. The holder accepts measuring pins from 0.1–1 mm, allowing versatile use with common test pins; its compact footprint (approximately 90 mm long and 17 mm wide) keeps the fixture unobtrusive on inspection benches. By simplifying the tactile action required during a check, the device supports reproducible outcomes and contributes to a more efficient quality routine. Visual coding that improves throughput Colour-coding in green and red gives unequivocal status feedback at a glance, which speeds operator decisions and lowers the risk of misinterpretation during mass inspection. The two functional faces — one for the go dimension, one for the no-go — mean fewer tool changes and a steady inspection flow. As a purpose-built gauge, it complements manual measurement tools and automated checking steps, so processes become faster without sacrificing clarity. Durable, precise and suited to workshop conditions Made from anodised aluminium, the holder combines low weight with resistance to workshop wear and corrosion, maintaining alignment and surface quality under frequent handling. The robust build ensures dimensional stability for repeat checks, while the simple design is easy to keep clean. Supplied as a practical accessory for inspection benches, this Metav IndustryLine fixture reflects Metav’s approach to making precision affordable and reliable — a consistent quality filter for European workshops and trade. Choose the Metav IndustryLine Go/No-Go measuring pin holder for clear, repeatable pass/fail checks and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for purchase advice or specification matching Technical data Article number: M318.568.10 Brand: Metav IndustryLine Colour: green - red Material: aluminium, anodised Function: holder for measuring pins Facts Length: 90 mm Width: 17 mm Compatible pin diameters: 0.1–1 mm Go/No-Go check: 9–10 mm SKU: M318.568.10 Special features Double-sided Go/No-Go indication Colour-coded green and red faces Compact, lightweight construction For bench and inspection use FAQ What pin diameters can be used with this holder? The measuring pin holder GO-NOGO 9–10 mm accepts measuring pins from 0.1–1 mm and is designed to secure standard test pins within that range. Is the holder suitable for continuous bench use? Yes. The anodised aluminium construction of the Metav IndustryLine holder provides corrosion resistance and low weight, making it appropriate for repeated use on inspection benches. How does the double-sided Go/No-Go function work? One face indicates the “go” condition and the opposite face the “no‑go” condition at the 9–10 mm check dimension, offering immediate visual pass/fail feedback during routine checks. Can this holder be integrated into existing inspection workflows? The compact dimensions and compatibility with 0.1–1 mm pins allow straightforward integration into manual and semi-automated inspection setups without major process changes. What makes this Metav IndustryLine accessory reliable? Manufactured from anodised aluminium and built for repeated handling, the holder’s simple, robust design maintains repeatability and clear visual indication under normal workshop conditions. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9-10mm Test Pin Holder For 0.1–1mm Pins, Anodised Green Aluminium - Metav IndustryLine
Take advantage of the combination of reliable repeatability, anodised aluminium construction and compact dimensions for efficient probe setups; order the holder directly via Metav Werkzeuge or ask their consultants for application advice. Test pin holder GO 9–10 mm — anodised aluminium, green mount (Metav IndustryLine) A Test pin holder GO 9–10 mm designed for secure clamping of measuring pins in indicator and gauging fixtures, suitable for workshop inspection and retrofitted indicator arms Anodised aluminium for light-weight durability Compatible with 0.1–1.0 mm measuring pins Green 9–10 mm mount for standard indicators Consistent mounting for repeatable inspections A compact mounting solution that ensures secure clamping and consistent contact conditions during repetitive checks. The housing accepts measuring pins from 0.1–1.0 mm, which keeps probe geometry constant and reduces setup variance. By standardising the contact point the holder improves measurement reproducibility, shortens fixture preparation and supports higher throughput in routine quality-control cycles. Durable, workshop-ready construction that eases handling Made from aluminium and finished by anodising, the component combines low mass with surface protection against wear and light corrosion, which helps maintain contact accuracy across many cycles. The reduced weight simplifies manual handling and repositioning, while the protected surface lowers maintenance needs—delivering a pragmatic balance between longevity and ease of use on the shop floor. Compact footprint and straightforward integration into gauging rigs Featuring a green mount sized for 9–10 mm interfaces and supplied as a one-sided holder, the accessory fits tight fixture arrangements with an approx. 76 mm length × 17 mm width footprint. Compatibility with common probe systems and clear mechanical mounting make installation and exchange quick, saving setup time and providing reliable positional repeatability for inspection benches and assembly lines. Metav IndustryLine standards ensure consistent supply quality for production environments. For robust probe mounting and straightforward integration, choose the Metav IndustryLine test pin holder and contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast delivery Technical data Article number: M318.566.10 Product: Test pin holder GO 9–10 mm, green mount, one-sided Manufacturer: Metav IndustryLine Facts Length: 76 mm Width: 17 mm Compatible pin diameter: 0.1–1.0 mm Special features Material: aluminium, anodised Mount: green 9–10 mm, one-sided Function: for the accommodation of measuring pins FAQ Which pin diameters can be used with this holder? The holder accepts measuring pins from 0.1 mm up to 1.0 mm, making it suitable for a wide range of fine probe tips. Is the holder suitable for indicator and gauging fixtures? Yes, the Test pin holder GO 9–10 mm is designed specifically for integration into indicator setups and gauging rigs and is compatible with standard 9–10 mm interfaces. What material and finish are used on the component? The component is made from aluminium and has an anodised finish for improved surface wear resistance and reduced risk of corrosion. Can the holder be retrofitted to existing probe arms? The one-sided green mount and compact footprint allow straightforward retrofitting to many indicator arms and inspection fixtures. What are the physical dimensions of the holder? The holder measures approximately 76 mm in length and 17 mm in width and uses a 9–10 mm green mount for attachment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com