Precision rulers for accurate alignment
Precision rulers are specialised measuring tools used to check flatness and straightness in metalworking and inspection processes, providing reliable alignment and verification for assemblies and machined surfaces. They are typically made from stainless steel or precision metals and serve machining, optics, electronics and quality control applications where tight tolerances are required; using a precision ruler improves repeatability and reduces non‑conformances. Common synonyms include straight edge and flatness gauge, and the durable construction alongside fine graduations ensures the tool remains accurate over years of workshop use.
5 m Twist Tape Measure 19 mm Nylon-Reinforced Double-Sided mm Scale Magnetic End Hook Locking Belt Clip, Class II - Metav IndustryLine
Take advantage of a compact, durable measuring tool with a double-sided metric scale and a magnetic end hook for faster, single-person measurement. Order the tape measure directly via Metav Werkzeuge or contact our consultants for tailored advice. Pocket Retractable Tape Measure M203.131 – 5 m, 19 mm, double‑sided nylon‑reinforced steel tape (Metav IndustryLine) A Pocket Retractable Tape Measure M203.131 that delivers fast, reliable site and workshop measurements with a double‑sided scale and secure locking mechanism Double-sided metric scale for quick reading Nylon-reinforced 19 mm steel tape for durability Magnetic end hook and secure lock ABS housing with belt clip, Class II accuracy Faster single-person measuring on site and in the workshop The double-sided metric scale allows reading from either side, reducing handling time and keeping workflows moving. With a 5 m reach and a 19 mm wide tape, measurements are stable over distance and the magnetic end hook supports single‑handed anchoring to ferrous edges. These features combine to shorten task duration and lower the risk of rework, making the measure well suited for fitting, carpentry and general assembly. Built for continuous use: resilience meets low weight The tape is a steel strip reinforced with nylon, which protects the scale from abrasion and resists kinking during repeated extension. Housed in an ABS casing and equipped with a robust belt clip, the unit is easy to carry and quick to access on busy jobs. At approximately 0.23 kg, the measure balances solidity with portability so that mobility across the workshop or site is not compromised. Accuracy and conformity for everyday quality control Designed to meet accuracy Class II, the measure provides measurement certainty appropriate for many industrial and trade applications. The integrated locking mechanism secures readings for transfer to templates or drawings, reducing human error during marking. This combination of reliable repeatability and practical handling supports standard quality checks without requiring specialist instruments. Practical operation and low-maintenance use The low-friction nylon coating on the tape simplifies rewinding and prolongs service life, while the magnetic end hook minimises slippage on metal edges. The secure lock keeps the tape extended when measuring across larger components, and the compact housing protects the scale during transport. For busy workshops that need dependably fast measuring, this measure is an efficient everyday tool. Contact Metav Werkzeuge in Emmerich to secure the M203.131 from Metav IndustryLine and benefit from practical, robust measuring solutions — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: M203.131 GTIN: 4054469181776 Manufacturer: Metav IndustryLine Facts Tape length: 5 m Tape width: 19 mm Weight: 0.23 kg Accuracy class: II Special features Double-sided metric scale Nylon-reinforced steel tape Magnetic end hook Locking mechanism ABS housing with belt clip FAQ What length does the tape measure reach? The pocket retractable tape measure M203.131 extends to 5 m, offering a practical range for most site and workshop tasks. Is the tape suitable for one-person measurements on metal parts? Yes. The tape features a magnetic end hook and a secure lock designed to support single‑handed anchoring and stable readings when working on metal components. How durable is the tape surface against wear? The tape is made of steel reinforced with a nylon coating, which increases abrasion resistance and helps preserve the printed metric scale on the M203.131. What accuracy can be expected for routine checks? The measure conforms to accuracy Class II, providing the level of precision typically required for general industrial and trade quality control activities. Does the measure include a belt clip for easy transport? Yes, the unit is supplied with an ABS housing and an integrated belt clip to keep the M203.131 accessible while moving around the workshop or site. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m x 19 mm Tape Measure Nylon-Reinforced Steel Tape Belt Clip, Locking Stop, EU Class II - Metav IndustryLine
Take advantage of the combination of nylon-reinforced steel tape, robust ABS housing and a compact, lightweight design for fast, reliable length measurement on the job. Order the pocket tape measure directly via Metav Werkzeuge or consult our specialists for specification advice. Pocket tape measure M203.121 — Accuracy class II, 5 m x 19 mm (Metav IndustryLine) A Pocket tape measure M203.121 engineered for durable, everyday length measurement in workshops, trades and on-site tasks. Nylon-reinforced steel tape for durability 5 m length with 19 mm tape width ABS housing with secure locking mechanism Integrated belt clip for hands-free carry Built for daily workshop use and long service life The housing combines impact-resistant ABS with a compact shell that protects the nylon-reinforced steel tape from knocks and abrasion. The 19 mm width increases lateral stability during extended spans, while the low 0.23 kg weight keeps the measure unobtrusive in a pocket or on a tool belt. These physical choices reduce wear and lower the frequency of replacements, so measurement capability remains available when it matters most on the shop floor. Precise, standard-compliant measurements for routine quality checks With an accuracy class II rating, the tape provides dependable readings across its full range, making it suitable for typical machine-shop and assembly tasks that require standard-conformance checks. The measuring range from 0 to 5 m covers most layout and installation jobs without switching tools. The broader tape profile improves readability and reduces flutter, which helps keep repeatability high during one-person handling and speeds up pass/fail assessments. Faster work through ergonomic handling and secure retention A positive locking mechanism allows rapid capture of measurements and prevents tape retraction during marking or transfer, saving time on repeated tasks. The integrated belt clip ensures the measure is always at hand, reducing search time between operations. Together these features support smoother workflows and fewer interruptions, which translates into measurable productivity gains for small teams and individual tradespeople. Durable tape material explained for non-specialists The tape core is steel with a nylon reinforcement, which combines the tensile strength of steel with a protective polymer layer that resists rust and surface scratching. This coating lengthens the useful life of the graduations and keeps the end hook operating cleanly. For everyday workshop use, that means fewer measurement errors caused by worn markings and a lower total cost of ownership compared with untreated tapes. For reliable workshop measuring from Metav IndustryLine, contact Metav Werkzeuge for purchase and technical advice—fast supply from Emmerich and direct assistance for specification checks. Technical Data Article number: M203.121 GTIN: 4054469181745 Manufacturer: Metav IndustryLine Facts Measuring range: 0–5,000 mm Tape length: 5 m Tape width: 19 mm Weight: 0.23 kg Accuracy class: II Special features Nylon-reinforced steel tape ABS housing Locking mechanism Belt clip FAQ What measuring range does this tape cover? The pocket tape delivers a measuring range of 0–5,000 mm; the Pocket tape measure M203.121 covers typical workshop and installation tasks up to 5 m. Is the tape durable enough for daily site use? Yes, the tape is a nylon-reinforced steel tape housed in an ABS shell with a locking mechanism, designed for continuous use in workshop and trade environments. How accurate is the measure for quality checks? The tape conforms to accuracy class II, providing reliable readings for routine machine-shop quality control and layout work. Does the product include a clip for carrying? An integrated belt clip is included to keep the measure readily available for hands-free transport during work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 m Twist Steel Measuring Tape 13 mm Double-Sided mm Scale ABS Case - Metav IndustryLine
Take advantage of a 50 m measuring length combined with a reinforced steel tape and EC class II accuracy for reliable long-range measurements on site. The robust ABS housing and double-sided millimetre graduation ensure fast, readable results and durable everyday use. Order the steel tape measure directly via Metav Werkzeuge or consult the technical advisors for application support. Metav IndustryLine Steel tape measure M203.162 — 50 m, 13 mm, double-sided graduation Steel tape measure M203.162 for long-range measuring in construction, surveying and workshop environments; engineered for durability and clear millimetre readings on both sides 50 m reinforced steel tape for long-range measuring Double-sided millimetre graduation for easy reading 13 mm blade width for improved stiffness and handling ABS housing with pistol grip for ergonomic hold Built for dependable long-range measuring on site The 50 m blade is manufactured from steel tape reinforced with nylon, which reduces kinking and improves rewind behaviour compared with plain blade steels. Paired with double-sided graduation, the design eliminates the need to flip the tape for alternate readings, speeding up work on fences, ducts or large assemblies. EC accuracy class II provides a predictable tolerance band that suits building, installation and general workshop measuring tasks where robust reproducibility is required. Durable construction that simplifies daily use An ABS housing protects the mechanism against impacts and dirt while keeping overall weight manageable at 0.97 kg for easy transport between job sites. The 13 mm blade width offers a good compromise between stiffness and portability: the tape resists lateral flex and delivers steady readings over long spans without the bulk of heavier reels. Visible millimetre marks on both faces aid measurement from either side of a profile, reducing repositioning and saving time during repetitive tasks. Practical benefits and suitability for common applications The reinforced blade and clear metric graduation make this tape ideal for landscaping, surveying, plumbing and large‑format fabrication. The combination of long-range measuring capability and a compact, impact-resistant case supports workflows where distance and durability matter more than micrometre-level precision. As a pragmatic tool, it integrates into everyday site kit and complements more precise instruments when rough and repeatable length data are needed. Request product details or a quotation from Metav Werkzeuge for the M203.162 tape measure — our Emmerich team is available at info@metav-werkzeuge.com or +49 2822 7131930 to advise on suitability for specific applications Technical data Article number: M203.162 GTIN: 4054469181844 Brand: Metav IndustryLine Accuracy: EC class II Facts Measuring range: 50 m (0–50,000 mm) Blade width: 13 mm Weight: 0.97 kg Material: steel tape reinforced with nylon Special features Double-sided millimetre graduation ABS housing Category: Line rulers FAQ What is the measuring range of this tape measure? The steel tape measure M203.162 has a measuring range of 50 m (0–50,000 mm), suitable for long spans and outdoor site work. How readable is the graduation on the blade? The blade features a double-sided millimetre graduation so measurements are visible from either face, improving speed and reducing repositioning during tasks. Is the tape suitable for rough job‑site use? Yes. The reinforced steel tape with nylon backing and the ABS housing are designed for durability and impact resistance in workshop and construction environments. What level of accuracy can be expected? This tape conforms to EC class II accuracy, providing consistent, site-appropriate tolerances for general construction and installation measurements. Can the tape be used for measuring curved surfaces or pipes? The reinforced blade handles moderate curvature; for tightly curved profiles a flexible measuring band may be preferable, but this tape offers a robust solution for many pipe and duct measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 m Twist Tape Measure 13 mm Width Double-Sided mm Graduation ABS Case, Class II Accuracy - Metav IndustryLine
Thanks to its long reach, reinforced blade and clear double-sided millimetre graduation, the tape delivers dependable, repeatable measurements on large jobs while remaining easy to handle; combine 50 m range, nylon‑reinforced steel and an ABS impact-resistant housing for robust site performance. Order the steel tape measure directly via Metav Werkzeuge or ask our consultants if needed. Steel Tape Measure M203.152 — 50 m, 13 mm blade, EC Class II (Metav IndustryLine) The Steel Tape Measure M203.152 is a long-range measuring tape designed for site and workshop use, featuring a 13 mm nylon‑reinforced steel blade with a double-sided millimetre scale and a sturdy ABS case. 50 m reinforced steel blade Double-sided millimetre division EC Class II accuracy ABS impact-resistant housing Long reach with site-ready durability A 50 m measuring range makes this tape suitable for large-format tasks such as site layout, duct and pipe runs, and perimeter checks. The 13 mm blade width and nylon‑reinforced steel construction increase straightness and reduce flutter during extraction, which results in faster, more precise measurements over long distances. The ABS housing protects the mechanism from impacts and abrasion on busy worksites, while the moderate mass contributes to stable rewinding and portable handling. Clear graduations and regulatory accuracy for reliable results Equipped with a double-sided millimetre scale, the tape offers good legibility from either side of the blade, aiding quick reading in confined or awkward positions. The designation EC Class II indicates conformity with the applicable accuracy band for general construction and surveying tasks, balancing precision with robustness. For environments where consistent reproducibility matters, the combination of a standardised accuracy class and a rigid blade minimises measurement scatter and supports efficient quality checks. Practical handling and application-focused design Weighing about 1.22 kg, the unit is balanced for single‑person use while remaining durable enough for repeated site handling. The compact case and reinforced blade simplify storage and transport between jobs. This tape is primarily intended for construction, civil engineering and large-scale workshop measurements where a long, tough measuring tape with readable millimetre graduations is required; its materials and build quality favour longevity and low maintenance in everyday professional use. Contact Metav Werkzeuge for tailored advice or to order the Steel Tape Measure M203.152 directly from our Emmerich stock and benefit from our precision‑focused supply chain Technical data Article number: M203.152 GTIN: 4054469181813 Manufacturer: Metav IndustryLine Material: nylon‑reinforced steel blade Housing: ABS Special feature: double-sided millimetre division Facts Measurement range: 0–50,000 mm Blade width: 13 mm Weight: 1.22 kg Accuracy: EC Class II Special features Double-sided millimetre graduation Reinforced steel with nylon coating ABS impact-resistant case FAQ Is the tape suitable for long outdoor measurements? The Steel Tape Measure M203.152 from Metav IndustryLine is designed for long outdoor and site measurements thanks to its 50 m reinforced steel blade and protective ABS case. What does EC Class II mean for everyday use? EC Class II indicates the tape meets the standard accuracy band suitable for general construction and survey tasks; the M203.152 therefore offers reliable repeatability for routine professional applications. Can the graduations be read from both sides? Yes, the double-sided millimetre division on the blade ensures clear readings from either face, which speeds up work in confined or awkward measuring positions. Is the blade reinforced to resist wear and corrosion? The blade is made from nylon‑reinforced steel, combining straightness and abrasion resistance for extended service life on site. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Hairline Ruler Blackened Tool Steel DIN 874/00 - Metav IndustryLine
Reliable construction and DIN‑compliant geometry combine to deliver precise scribing in tight spaces; the hardened, ground and lapped tool‑steel blade ensures repeatable results while the compact 50 mm format suits fine mechanical and watchmaking tasks. Order the hairline ruler directly via Metav Werkzeuge or ask our consultants for specification advice. Hairline ruler M214.018 — 50 mm, fully hardened tool steel (DIN 874/00) The Hairline ruler M214.018 is a compact sighting rule designed for precise scribing and alignment in fine mechanical and workshop applications, meeting the DIN 874/00 specification. Fully hardened tool steel, ground and lapped Complies with DIN 874/00 for hairline rules Compact 50 mm length for micro and fine work Blackened finish reduces glare and corrosion Precise scribing where space is limited Small assemblies and microcomponents demand tools that combine stability with fine geometry. The 50 mm blade, manufactured from fully hardened tool steel and finished by grinding and lapping, provides a consistently flat reference edge that resists wear. Compliance with DIN 874/00 assures a recognised manufacturing and inspection standard, enabling reliable interchangeability with existing measurement procedures. This construction reduces measurement scatter and supports repeatable scribing and alignment tasks in precision workshops. Stability and handling for repeatable results A ground and lapped surface minimises surface irregularities, while the blackened finish reduces reflective glare that can obscure a hairline. In the micro measuring range (max. 10–100 mm) the short blade length maintains torsional rigidity, making the instrument particularly suitable for watchmaking, fine mechanical work and inspection of small parts. The robust steel substrate ensures dimensional stability under normal workshop conditions, translating into fewer rechecks and faster setup times during routine tasks. Low‑maintenance tool built for everyday use The simple geometry and hardened substrate make the ruler inherently durable; routine care consists of keeping the surface clean and lightly oiled to protect the blackened finish. The compact format is easy to store in tool drawers or inspection kits, and the construction avoids fragile features that require special handling. For small teams seeking reliable reference tools, this sighting rule offers a pragmatic balance between longevity and the precision required for fine scribing operations. Secure precise micro‑scribing with Metav IndustryLine’s hardened hairline ruler: contact Metav Werkzeuge in Emmerich for tailored advice, specification checks or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.018 GTIN: 4054469106069 Standard: DIN 874/00 Facts Length: 50 mm Tariff code: 90178090 Special features Material: Tool steel, fully hardened, ground and lapped Finish: Blackened Category: Lineale Suitable range: Micro (max. 10–100 mm) for fine mechanical work FAQ What is the usable measuring length of this rule? The usable blade length is 50 mm; the Hairline ruler M214.018 is therefore classified for micro‑range measurements suitable for fine mechanical tasks. Which material and finish are used? The hairline rule is made from fully hardened tool steel with a ground and lapped surface and a blackened finish to reduce glare and improve corrosion resistance. Is the geometry standardised? Yes, the product conforms to DIN 874/00, ensuring standardised hairline geometry for consistent scribing and alignment. For which applications is this ruler ideal? The compact format and stable construction make the Hairline ruler M214.018 ideal for watchmaking, precision assembly, small part inspection and other fine mechanical work. How should the ruler be maintained? Keep the blade clean and apply light oil to protect the blackened finish; avoid impacts or bending forces to maintain calibration and surface integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Hairline Stainless Steel Straightedge, Hardened And Lapped, DIN 874/00 - Metav IndustryLine
Take advantage of the combination of corrosion‑resistant INOX steel, a hardened, ground and lapped finish, and the compact 50 mm length for reproducible fine measurements. Order the hairline rule directly via Metav Werkzeuge or consult our specialists if additional information is required. Hairline rule M214.118 — INOX stainless steel, hardened & lapped (Metav IndustryLine) The hairline rule M214.118 offers a compact, DIN‑conform measuring edge designed for fine marking and verification in precision workshops and quality control. INOX stainless steel, fully hardened and lapped Conforms to DIN 874/00 accuracy standard Compact 50 mm length for micro work Precision class 00 for fine measurements Compact geometry that supports precise micro‑work The short measuring length of 50 mm makes this instrument ideal where rigidity and repeatability matter: the reduced span minimises flex and vibration during handling, which benefits fine‑mechanical tasks such as watchmaking, small component inspection and precision marking. The combination of a compact profile and an accuracy class 00 edge ensures that measurements and scribing lines remain consistent from one part to the next, reducing rework and increasing throughput in small‑batch production. Durable finish and traceable standard compliance Constructed from INOX stainless steel that has been fully hardened, ground and lapped, the rule provides a wear‑resistant measuring face that retains its geometry over prolonged shop use. Compliance with DIN 874/00 gives a clear, standardised reference for quality documentation and incoming inspection routines. The finished surface minimises corrosion and mechanical wear, so the tool maintains its calibration margins longer than untreated alternatives. Everyday benefits in the workshop and inspection bench Lightweight and easy to handle, this line rule integrates smoothly into both tool kits and inspection stations; its small mass and refined finish facilitate controlled placement and fine alignment tasks. The trimmed format supports quick comparisons and scribing while occupying minimal bench space, helping to streamline workflows where speed and precision are both required. Supplied with the clear identification SKU M214.118, the item is straightforward to reference in inventory and quality records. Contact Metav Werkzeuge for specialist advice and secure supply of the M214.118 hairline rule from our Emmerich stock. Technical data Article number: M214.118 GTIN: 4054469106663 Norm: DIN 874/00 Category: Line rules Numbers Length: 50 mm Weight: 0.04 kg Accuracy class: 00 Tariff code: 90173000 Special features Material: INOX stainless steel, fully hardened, ground and lapped Finish: ground and lapped Application: precise marking and verification in fine‑mechanical work Brand: Metav IndustryLine FAQ What material is the rule made from? The hairline rule is manufactured from INOX stainless steel that is fully hardened, ground and lapped to provide a durable measuring face. Which accuracy standard does this rule meet? The rule conforms to DIN 874/00 and is produced to accuracy class 00, making it suitable for fine measurement and layout tasks. Is the 50 mm length suitable for precision components? Yes, the 50 mm format is designed for high rigidity and repeatable positioning, which is advantageous for precision components and micro‑assembly work. How should the rule be maintained to retain accuracy? Clean gently after use and store in a dry environment; the ground and lapped finish resists wear, helping to preserve the measuring edge under normal workshop conditions. How is the item identified for inventory and traceability? The product is listed under SKU M214.118 and GTIN 4054469106663 for clear traceability in stock and quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500 mm Workshop Rule 40 x 5 mm Faceted Edge Ungraduated, Hardened Ground Special Steel - Metav IndustryLine
The robust construction and precise 500 x 40 x 5 mm dimensions provide a reliable reference for workshop layout and bespoke marking tasks; the faceted edge and ground special steel combine durability with a repeatable contact surface. Order the workshop ruler directly via Metav Werkzeuge or consult our advisers for application-specific guidance. Workshop ruler M214.722 – 500 x 40 x 5 mm, faceted, ungraduated (Metav IndustryLine) The Workshop ruler M214.722 is a solid, ungraduated layout rule for heavy workshop use and customised marking tasks 500 mm overall length for larger components Ground special steel for wear resistance Faceted edge for accurate reference Unmarked surface for bespoke marking/workshop use Reliable reference for layout and assembly The 500 mm length and generous 40 mm width give this layout rule the stability required when marking larger profiles or aligning assemblies on the shop floor. Manufactured from ground special steel, the rule resists wear and preserves its flatness under regular workshop handling, which translates into fewer re-measurements and a smoother production flow. The ungraduated design leaves the surface free for custom scribing or fitted scale application, making the tool adaptable to varied layout systems. Precision contact and edge definition for repeatable work A faceted edge provides a clear contact plane that supports precise edge referencing during scribing or alignment. The ground finish reduces burrs and micro-unevenness that can distort marks; in practice this means a dependable baseline for repetitive tasks such as drilling jigs, fixture set-up or component trimming. The material and finish together prioritise repeatability and low maintenance, so standard workshop procedures remain efficient even under daily use. Practical workshop handling and application spectrum Designed with workshop ergonomics in mind, the rule’s proportions balance reach with manageable handling when used single-handed or as part of two-person operations. The ungraduated face is particularly useful for professionals who prefer bespoke markings, temporary scales or transfer scribing. As a result, the item is well suited to metalworking shops, maintenance departments and fixture makers who value a robust, adaptable layout tool that integrates easily into existing processes. For procurement advice and fast delivery from Emmerich, contact Metav Werkzeuge about the Metav IndustryLine workshop ruler M214.722 via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M214.722 GTIN: 4054469109619 Customs tariff number: 90178010 Facts Dimensions: 500 x 40 x 5 mm Material: ground special steel Category: Workshop ruler / Lineal ECLASS: 21170122 Special features Faceted edge for reference contact Ungraduated surface (without division) Label: Werkstatt-Lineal 500 x 40 x 5, with facet, without graduation FAQ Is this ruler suitable for marking and layout on steel? Yes. The workshop ruler M214.722 is made from ground special steel and is suited to routine layout and marking tasks on steel components. Can the ruler be used as a guide for scribing and transferring dimensions? The faceted edge of the M214.722 provides a defined contact plane, making it appropriate as a guide for scribing and transfer marking in workshop environments. Does the product include factory calibration or certification? The workshop ruler M214.722 is supplied as a precision ground tool; no ISO 17025 calibration certificate is included with this ungraduated layout rule. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Compact Pro Pocket Tape Measure Double-Sided Print BladeArmor® Reinforced, Class II (±0.5 mm/m) - STANLEY
Benefit from the Compact Pro's compact, lightweight design and BladeArmor®‑reinforced tip for reliable measurements and extended service life; order the STANLEY Compact Pro pocket tape measure L 5 m, 25 mm, Class II (±0.5 mm/m) directly via Metav Werkzeuge or contact our consultants for technical guidance. STANLEY Compact Pro pocket tape measure L 5 m, 25 mm, Class II (±0.5 mm/m) STANLEY Compact Pro pocket tape measure L 5 m, 25 mm, Class II (±0.5 mm/m) offers a compact, robust measuring solution for site work, maintenance and workshop tasks. Compact, lightweight design for improved grip Double-sided print for easier overhead use BladeArmor® tip reinforcement on first 8 cm Multi-end hook and belt clip for fast handling Precise results from a compact tool The Compact Pro pocket tape delivers Class II accuracy (±0.5 mm/m) across its 5 m blade, making it suitable for routine industrial and trade measurements where consistent reproducibility matters. The 25 mm blade width provides a stable span for longer pulls while remaining manoeuvrable in confined spaces. The double-sided graduation is printed for clear legibility during both normal and overhead measuring, reducing alignment errors and speeding up repetitive tasks. The design supports efficient workflows by combining accuracy with quick-read markings. Robust construction that reduces downtime A reinforced blade tip is a frequent weak point; the first 8 cm of the blade are finished with BladeArmor® to resist kinking and premature wear, which extends usable life and lowers replacement frequency. The compact, lightweight housing improves handling comfort during extended use, while the multi-end hook and integrated belt clip enable rapid access and secure stowage on the job. These practical design choices translate into less tool downtime and more continuous productivity on the shop floor. Clear benefit for procurement and workshop teams As a straightforward measuring instrument with proven conformity to EC accuracy class II, the tape supports standardised measurement procedures and quality checks without the complexity of specialist equipment. The instrument's balanced combination of portability and stability makes it a cost‑effective addition to maintenance kits, installation sets and general workshop supplies. The unit's marking system and blade width reduce repeat measurements, saving time on common jobs and aiding operational efficiency. Support and next steps for specification queries For customers requiring additional specification details or compatibility advice, the tape's technical attributes and application notes can be clarified on request. The product is intended for general workshop and field measuring tasks and is listed with essential data to assist purchasing decisions; further assistance is available for integration into existing tool inventories or measurement protocols. Contact Metav Werkzeuge today for tailored advice on the STANLEY Compact Pro pocket tape measure and secure prompt delivery from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 8002396248NW Product type: Compact Pro Product name: Pocket tape measure Compact Pro L 5 m, 25 mm, Class II accuracy, STANLEY Figures / Core technical data Length: 5 m Blade width: 25 mm Graduation: mm/cm Accuracy: Class II (± 0.5 mm/m) Packaging unit: 1 Special features / Versions Compact and lightweight design for better grip and comfort Double-sided print for easier overhead measurements BladeArmor® coating on the first 8 cm to reinforce the blade tip Multi-end hook Belt clip EC accuracy class II FAQ What accuracy class does this tape measure have? The Compact Pro pocket tape measure is specified to EC accuracy Class II, with an accuracy of ±0.5 mm per metre. Is the blade suitable for overhead measurements? Yes, the blade features double-sided print which facilitates clear readings during overhead and awkward-angle measurements. How long is the blade and what is its width? The measuring blade extends to 5 m and has a width of 25 mm, providing a stable span and readable graduations. Does the tape offer enhanced tip protection? The first 8 cm of the blade are finished with BladeArmor® reinforcement to reduce the risk of kinking and damage at the tip. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Digital Measuring Tape With Mm/Inch Display, 5m Capacity, 0.2kg - Metav IndustryLine
Take advantage of a compact, digital display and a full 5 m measuring range in a lightweight package; the M203.100 combines clear readout, practical tape geometry and easy handling to speed up routine measurements and reduce rework. Order the instrument directly via Metav Werkzeuge or consult the Metav advisers for application-specific guidance. M203.100 Digital measuring tape 5 m by Metav IndustryLine — digital readout with mm/inch toggle The M203.100 Digital measuring tape 5 m is a compact, workshop-grade measuring instrument designed for rapid linear measurements on site and in production environments, featuring a selectable mm/inch readout and a balanced housing for handheld work. Digital readout with mm/inch function 5 m measuring range, robust tape construction Lightweight 0.2 kg for handheld use High-visibility markings and sturdy frame Fast, reliable readings for everyday measurement tasks The integrated digital display with a dedicated mm/inch toggle gives an immediate, legible result that removes the need for manual conversion and reduces transcription errors. The instrument’s numeric readout and clear tape markings together promote faster data capture in the workshop; this rational advantage translates into fewer repeated measurements and shorter throughput times. The combination of a numeric display and the traditional tape scale supports both quick checks and documented measurement records. Practical design that supports site and workshop use With a full 5 m measuring range presented on a 19 mm tape blade, the unit strikes a balance between reach and manageable handling. At just 0.2 kg the tape is noticeably lightweight for handheld work, which lowers operator fatigue during repetitive measurement cycles. A robust frame and high-visibility graduations improve usability under workshop lighting, while the compact housing enables storage on a tool board or in a workbag. The device is suitable for installers, machinists and assembly staff who need a reliable, portable linear gauge. Integration into production and inspection workflows The measuring tape is appropriate as a routine measuring device where quick, repeatable distance checks are required. The digital readout supports clear documentation of linear measurements, helping to standardise inspection steps and streamline handover between operators. The straightforward functionality reduces training time and supports consistent process control, delivering a pragmatic benefit to production environments that value efficiency and traceable measurements. Contact Metav Werkzeuge for application advice and order the M203.100 directly from Metav Werkzeuge in Emmerich for a dependable digital measuring solution. Technical data Article number: M203.100 GTIN: 4054469102481 ECLASS: 21160103 Manufacturer: Metav IndustryLine Facts Measuring range: 0–5,000 mm (5 m) Weight: 0.2 kg Blade width: 19 mm Tariff number: 90173000 Special features Digital display with mm/inch toggle Compact, handheld housing High-visibility tape markings Category: Lineale (rulers) FAQ What measuring units does the device display? The M203.100 provides a digital readout with a selectable mm/inch function for flexible use in metric and imperial workflows. Is the tape suitable for workshop and site use? Yes, the digital measuring tape is designed for both workshop measurements and on-site checks, combining a 5 m range with a sturdy frame and a lightweight housing. How is the M203.100 best used in production routines? Its clear digital readout and legible blade markings make the M203.100 suitable for routine distance checks and documented inspection steps within serial production or assembly processes. Which identifier should be quoted when ordering or specifying the product? Please refer to SKU M203.100 or GTIN 4054469102481 when ordering or specifying the digital measuring tape. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm PowerLock Tape Measure 19mm Blade With Window, Class II Accuracy - STANLEY
Benefit from a Mylar‑coated blade and a chrome‑finished, impact‑resistant housing for dependable workshop performance; the clear sight window plus lock and recoil ensure fast, accurate marking and safe handling. Order the STANLEY PowerLock® pocket tape measure directly via Metav Werkzeuge or ask the consultants if needed. PowerLock® Pocket tape measure — 5 m × 19 mm, EG Class II (STANLEY) The PowerLock® pocket tape measure combines a durable, Mylar‑protected blade with a chrome‑finish housing for precise, everyday measuring on site and in the workshop. Mylar-coated blade for extended durability Chrome-finished, impact-resistant plastic case Integrated sight window for clear marking Belt clip, lock and recoil for fast handling Accurate measurements for routine workshop tasks The 5 m blade with mm/cm graduation and EG Class II conformity gives reliable results for general construction and workshop measurements. The blade is fully Mylar‑coated, which preserves printed graduations and reduces wear; this protective layer keeps the scale legible longer, so measurements remain comparable over time. Class II accuracy signals compliance with EU measuring device tolerances for everyday tasks, providing a trustworthy balance between precision and cost‑efficiency for production and maintenance work. Built to withstand workshop use and handling A chrome‑finished, impact‑resistant plastic housing protects the mechanism from knocks and light drops common on site. The casing’s polished surface aids cleaning and resists soiling, while the compact design keeps overall weight low for pocket carry. The blade’s 19 mm width offers a stable extension with minimal flex for measuring across spans, and the housing incorporates a robust return spring to ensure consistent recoil action without jerking, prolonging service life and reducing downtime for replacements. Practical features that speed up daily work An integrated sight window enables exact marking directly at the tape’s end, reducing transfer errors when scribing or aligning components. The combination of a positive lock and smooth rewind supports quick, single‑handed operation when measuring runs or repetitive cuts. A sturdy belt clip keeps the tape accessible at the workbench or on site clothing, while the overall construction emphasises low maintenance and dependable function over many cycles of use. For precise, durable measuring choose the STANLEY PowerLock® via Metav Werkzeuge — contact Metav Werkzeuge for product details and purchasing assistance. Technical data Article number: 4000787015NW Type: PowerLock Product: Pocket tape measure Manufacturer: STANLEY Facts Length: 5 m (5000 mm) Blade width: 19 mm Graduation: mm/cm Accuracy: EG Class II Packaging unit: 1 Special features Mylar protective coating on blade Chrome-finished plastic housing Impact-resistant and polished casing Integrated sight window Locking mechanism and recoil function Belt clip included FAQ What length does the tape measure provide? The STANLEY PowerLock® pocket tape measure offers a 5 m blade (5000 mm) suitable for typical workshop and site tasks. Is the blade protected against wear and fading? Yes, the blade of the PowerLock® is fully Mylar‑coated, which protects printed graduations and extends legibility. What does EG Class II mean for measurement accuracy? EG Class II indicates conformity with EU accuracy tolerances for general measuring tools; the STANLEY PowerLock® meets this class for reliable everyday measurements. Is the housing suitable for rougher environments? The tape measure features a chrome‑finished, impact‑resistant plastic housing, designed to withstand knocks and routine on‑site handling. Does the tape include a belt clip and a locking function? The STANLEY PowerLock® includes a belt clip, a positive lock and smooth recoil to aid fast, single‑handed operation and safe storage. Manufacturer: STANLEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm PowerLock Tape Measure 19mm Mylar‑Coated Band, EG Class II - STANLEY
Take advantage of the Mylar®-coated blade and the controlled automatic retraction for reliable, long-lasting measurements on the workshop floor; order the Stanley tape measure directly via Metav Werkzeuge or consult our team for tailored stocking options. PowerLock® 5 m x 19 mm Pocket Tape Measure (STANLEY) — Mylar®-protected blade, automatic retraction A PowerLock® 5 m x 19 mm pocket tape measure designed for everyday workshop and site measurement tasks, combining robust construction with controlled rewind and an adjustable end hook for inside and outside measurement. Chrome-plated, impact-resistant housing Mylar®-coated blade for wear protection Controlled auto-retract protects hook Belt clip and locking mechanism included Durable protection that reduces downtime The instrument features a chrome-plated, impact-resistant plastic housing, polished for resistance to knocks and abrasion, paired with a blade fully covered by a Mylar® protective layer. This combination extends blade life under frequent use and reduces the frequency of replacements, which supports predictable production flow and lowers overall maintenance effort. The robust casing also helps to guard internal mechanisms against dust and light impacts typical on site. Precise, repeatable readings for trades and workshops With a 5 m measuring range and a 19 mm wide blade graduated in mm/cm, the tape falls into EC class II accuracy, suitable for most construction and fabrication tasks where repeatable results are required. The end hook is adjustable for internal and external measurement and is riveted for secure attachment—configured with multiple rivets at longer lengths for additional strength. A controlled retraction at 10 m reduces stress on the hook and blade, preserving measurement accuracy over time. Safer handling and efficient operation on site Measurement operations are simplified by the automatic retraction system with a dedicated stop button, while a reliable locking mechanism holds the blade in place during layout or marking. The inclusion of a sturdy belt clip ensures secure transport between tasks. Controlled rewind limits sudden blade snap-back, reducing the risk of damage to the tool and improving operator safety during repetitive measuring tasks. Ideal application areas and user benefits This pocket tape measure is suitable for carpenters, electricians, installers and maintenance teams who require a compact yet robust measuring tool for daily use. The blend of wear protection, controlled mechanics and a practical size makes it a pragmatic choice for workshop benches and site toolkits alike, delivering dependable results without unnecessary complexity. For supply enquiries, tailored quantity options or expert advice on the STANLEY PowerLock® 5 m x 19 mm pocket tape measure, contact Metav Werkzeuge GmbH in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for fast, reliable guidance and delivery. Technical data Article number: 4000787059NW Type: PowerLock Product: Pocket tape measure Brand: STANLEY Packaging unit: 1 Facts Length: 5 m Blade width: 19 mm Graduation: mm/cm Accuracy: EC class II Controlled retraction activation: at 10 m Special features Chrome-plated plastic housing, impact-resistant, polished Blade fully coated with Mylar® protective coating Automatic retraction with stop button Adjustable end hook for internal/external measurement End hook riveted: triple from 5 m, double to 3 m Locking mechanism and belt clip FAQ Is the tape accurate enough for precise layout work? The EC class II rating makes the Stanley PowerLock® 5 m x 19 mm pocket tape measure suitable for most layout and fitment tasks in trade and workshop environments, providing consistent millimetre graduations for repeatable results. Can the tape be used for both inside and outside measurements? Yes, the adjustable end hook is designed for both internal and external measurement, and the riveted hook construction on the PowerLock® ensures secure attachment during either method. How is the blade protected against wear and corrosion? The blade is fully coated with a Mylar® protective layer, which significantly reduces abrasion and extends the effective life of the tape in regular use. Does the tape offer a safe retraction and carry solution? The product includes an automatic rewind with a stop button, a locking mechanism to secure the blade in position and a belt clip for secure transport, all aimed at safer handling on site. Which users benefit most from this tape measure? Carpenters, site operatives, electricians and general workshop staff benefit from the balance of durability, controlled mechanics and practical dimensions of this pocket tape measure. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Tape Measure Chrome ABS Case Auto Rewind, 19mm Blade EG Class II - Bayerische Maß-Industrie Arno Keller GmbH
Benefit from the combination of durable chrome-plated ABS housing, automatic tape rewind and stable 19 mm blade for dependable, fast metric measuring; order via Metav Werkzeuge or consult our technical advisors for precise specification support. Pocket retractable tape measure – chrome-plated, 5 m × 19 mm, automatic rewind (Bayerische Maß‑Industrie) The pocket retractable tape measure provides compact, metric measuring for workshops and on-site tasks with robust construction and reliable EG Class II accuracy Chrome-plated ABS housing with clip Automatic tape rewind with band brake Wide 19 mm blade for stable measurements EG accuracy class II for metric work Robust construction for everyday workshop use The chrome-plated ABS housing combines corrosion resistance with lightness to reduce fatigue during repeated use. A compact casing with an integrated belt clip keeps the tape accessible on the workbench or the operator’s belt. The combination of a broad 19 mm blade and a strong crown (pre-formed curvature) ensures the measuring tape extends well beyond the casing with minimal bending, which improves readability and reduces the need for a second hand while measuring long runs. Fast retraction and safe operation reduce downtime An automatic tape rewind paired with a band brake protects the blade and speeds up handling in a busy environment. The brake prevents uncontrolled retraction, lowering the risk of damage to the edge of the tape and to fingertips. The retraction mechanism supports repeated cycles throughout the working day and contributes to lower maintenance needs; the tape’s design therefore helps maintain consistent performance across many measurement tasks. Standardised accuracy for routine metric measurements Marked in mm/mm and rated to EG Class II, this tape measure meets the typical tolerances expected for handheld measuring tools in workshops and general industrial use. EG Class II indicates standardised, traceable accuracy suitable for layout work, carpentry, installation and maintenance tasks where reliable millimetre readings are required. The clear graduations and stable blade geometry make measurements reproducible even under frequent use. Practical design that keeps work flowing A chrome-plated finish on the ABS shell enhances resistance to oils and light impacts while maintaining an attractive, professional appearance at the bench. The wide blade resists twisting and offers improved stand-out when measuring across gaps; the integrated clip keeps the tool close at hand. These practical features combine to reduce small interruptions, improving throughput and making the tape a dependable everyday instrument for technicians and tradespeople. Contact Metav Werkzeuge for ordering and technical advice on the pocket retractable tape measure (SKU 4000855418NW); further specifications and rapid delivery options are available from Metav Werkzeuge GmbH via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000855418NW Type: two-component Product: Pocket retractable tape measure Brand: Bayerische Maß-Industrie Arno Keller GmbH Facts Length: 5 m Blade width: 19 mm Graduation: mm/mm Accuracy: EG Class II Special features Chrome-plated ABS housing Automatic tape rewind with band brake Integrated clip Wide blade with strong crown for stability Plastic housing FAQ What does EG Class II mean for this tape measure? EG Class II denotes a standardised accuracy level for handheld measuring tapes; the pocket retractable tape measure (Bayerische Maß‑Industrie, SKU 4000855418NW) conforms to the tolerances expected for routine workshop and installation measurements. Is the blade durable for shop-floor use? Yes, the 19 mm blade with a pronounced crown is designed for stability and reduced flex during measurement runs; the automatic rewind and band brake also limit wear on the blade edge. Can the tape be carried on a belt? The casing includes an integrated clip for secure attachment to a belt or pocket, making the tape measure convenient for mobile tasks. Will the chrome-plated housing resist workshop conditions? The chrome-plated ABS shell offers a balance of impact resistance and corrosion protection suited to general workshop environments while keeping the instrument lightweight. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Tape Measure FatMax BladeArmor 32mm Blade With BladeArmor Coating, Class II - Stanley Black & Decker Deutschland GmbH
Take advantage of the BladeArmor protection and the DynaGrip casing for reliable, long-lasting on-site measurement; the wide, 32 mm blade and controlled rewind ensure accurate results and less wear. Order the FatMax BladeArmor tape measure directly via Metav Werkzeuge or ask our consultants if additional advice is required. FatMax BladeArmor pocket tape measure — robust 5 m, 32 mm blade (Stanley) A FatMax BladeArmor pocket tape measure designed for demanding workshop and site use, combining reinforced blade protection and a shock‑resistant grip case for dependable everyday measuring. Durable BladeArmor foil on first 15 cm 3.35 m horizontal reach without kinking 32 mm wide blade with Mylar coating DynaGrip bi‑material case with belt clip Robust protection that reduces breakage and downtime The reinforced BladeArmor foil applied to the first 15 cm of the blade reduces the risk of blade breakage by around 90%, providing a significant improvement in service life compared with unprotected tapes. In addition, the blade is fully covered with a Mylar protective layer, which resists abrasion and preserves the printed graduations for longer; this translates into less maintenance and clearer legibility in the long term. A controlled rewind mechanism limits the stress on the tip and blade during retraction, protecting the end hook and the internal spring so that replacement intervals are extended and workshop interruptions are minimised. Confident reach and dependable measurement results The measuring strip extends horizontally up to 3.35 m without bending, enabling single‑handed measurements across larger spans while reducing the need for a second operator or temporary supports. With a total length of 5 m and clear mm/cm graduation, the tape offers practical versatility for trade use. Accuracy is specified as class II (EC II), suitable for general industrial and construction tasks where reliable dimensional control is required. The large, triple‑riveted sliding hook is designed to move for accurate internal and external measurements, ensuring the blade seats correctly whether hooking over edges or pressing against a surface. Ergonomic design for everyday use on site and in the workshop The DynaGrip bi‑material housing combines a hard internal shell with softer external grip areas to improve handling and impact resistance; the casing is described as shock‑resistant, helping the tool survive drops and rough treatment typical of active sites. Practical features such as a secure lock, automatic rewind and a sturdy belt clip make the tape easy to deploy and store, while the compact pocket format keeps the instrument accessible at the workbench. These design choices support efficient workflows: faster measuring, reduced slippage and a tool that feels secure in the hand during repetitive tasks. For professional advice or immediate supply from our stock in Emmerich, contact Metav Werkzeuge — specialists in precision tools and workshop equipment who can advise on application suitability and availability Technical Data Article number: 4000855105NW SKU: 4000855105NW Product type: Taschenrollbandmaß Label: Taschenrollbandmaß FatMax L.5m B.32mm mm/cm EG II Ku.Festst.SB STANLEY Facts Length: 5 m Blade width: 32 mm Graduation: mm/cm Horizontal reach: up to 3.35 m without kinking Accuracy class: II (EG II) Special features Blade Armour foil on first 15 cm Full Mylar protective coating on blade Controlled rewind for end hook protection Large, triple‑riveted sliding hook for internal/external measurement DynaGrip bi‑material shock‑resistant case Belt clip, lock and automatic rewind Case material: plastic FAQ How does the BladeArmor protection improve durability? The BladeArmor layer on the measuring tape significantly reduces breakage risk; the FatMax BladeArmor tape measure (Stanley, pocket tape measure, SKU 4000855105NW) uses this reinforcement on the first 15 cm to protect the most stressed area and prolong service life. Can the tape be used for long horizontal spans without sagging? Yes, the measuring strip supports horizontal extension up to 3.35 m without kinking, allowing single‑person measurements across moderate spans. Is the tape suitable for precise workshop measuring tasks? The tape is specified to accuracy class II (EG II), making it suitable for general industrial and construction measurements where this level of tolerance is acceptable. What features support safe retraction and hook longevity? The tool includes a controlled rewind mechanism and a large triple‑riveted sliding hook; these features reduce impact on the blade and hook during retraction and improve long‑term reliability. What makes the casing comfortable for repeated use? The DynaGrip bi‑material case combines a hard shell with soft grip zones, offering both impact resistance and a secure hold during repetitive measuring tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Tape Measure Tylonâ„¢ 19mm Blade mm/cm Belt Clip - STANLEY
Take advantage of a compact measuring tool that combines a 5 m measuring range, a stable 19 mm blade and clear mm/cm gradation for reliable everyday metric work; order the STANLEY pocket tape measure directly via Metav Werkzeuge or ask our consultants if needed. Tylon™ Pocket Tape Measure – 5 m, 19 mm blade (STANLEY) The Tylon™ pocket tape measure is a compact pocket tape designed for metric measuring tasks on the workshop bench and on site, offering a robust blade and a belt clip for secure carry. Durable Tylon™ coated blade 5 m measuring range 19 mm blade width for improved rigidity mm/cm dual-scale gradation Precise metric measuring that supports efficient workflow The combination of a 5 m measuring range and a 19 mm blade delivers a balance between reach and stability that speeds routine measuring tasks. The dual mm/cm scale provides immediate clarity for metric dimensions, reducing conversion errors and rework. A Tylon™ coating protects printed graduations against abrasion, which preserves accuracy over repeated use and extends service life. For workshop planners and quality engineers, the clear graduations and consistent blade behaviour make read-offs faster and measurement documentation more reliable. Compact design with practical handling for everyday tasks A compact pocket tape with a belt clip keeps the tool accessible without adding bulk to the workwear. The 19 mm blade width increases stand-out rigidity, which aids single-person measurement of moderate spans without additional support. For tradespeople and maintenance teams, this means fewer interruptions and better first-time measurements. The simple, lightweight form factor supports rapid movement between jobs while maintaining the robustness expected in industrial and craft settings. Built for dependable, repeatable performance Manufactured under the STANLEY label and supplied in loose packaging with a single unit per package, the tape meets the practical requirements of production floors and service fleets. The visible metric graduations and robust blade coating contribute to consistent measurement results over time, reducing inspection variation. Where regular checking and documented measurements are part of the quality process, this measuring tape offers a straightforward, low-maintenance solution that supports traceable workflows and daily productivity. Choose STANLEY's Tylon™ pocket tape for precise metric measuring and rely on Metav Werkzeuge for supply and advice — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for procurement guidance and delivery options Technical data Article number: 4000787087NW Brand: STANLEY Type: Tylon™ pocket tape measure Product type: Pocket tape measure Facts Length: 5 m Blade width: 19 mm Scale: mm/cm Packaging unit: 1 Packaging: loose Special features Tylon™ coated blade Belt clip Accuracy class: EG II Labelling: metric only FAQ What measurement range does the tape offer? The tape provides a 5 m measuring range and is marked in mm/cm for metric measurements. Is the blade suitable for single-person measuring of moderate spans? The 19 mm blade width delivers increased rigidity, which helps when measuring moderate spans without a second person. How does the Tylon™ coating affect durability? The Tylon™ coating protects printed graduations from abrasion, preserving legibility and measurement accuracy over repeated use. Does the tape have a belt clip for convenient carry? Yes, the pocket tape is equipped with a belt clip for secure and convenient transport during day-to-day work. What is the product identifier for ordering or stock checks? The product can be referenced by SKU 4000787087NW for procurement and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Tylonâ„¢ Pocket Tape Measure 19mm Blade mm/cm Belt Clip SB - STANLEY
Combining a compact form factor with a 19 mm blade and clear mm/cm graduations, the Tylon™ delivers reliable metric readings across workshop and site tasks; order the tape measure directly via Metav Werkzeuge or consult our advisers for specification support. Tylon™ Pocket Tape Measure by STANLEY — 5 m, 19 mm blade A Tylon™ pocket tape measure optimised for precise metric measuring on the workshop bench and on site. Compact 5 m length for versatile measuring 19 mm wide blade for improved stability Metric mm/cm graduations for precise readings Belt clip for secure pocket carry Accurate metric measurement for everyday workshop tolerances The Tylon™ pocket measure offers mm/cm graduations on a 5 m tape to support common precision tasks where repeatable metric readings matter. The 19 mm blade width increases rigidity during extended pulls, reducing sag and the need for repeated measurement—this stabilising effect translates into faster set-up and fewer rechecks when laying out parts or checking component dimensions. High-contrast markings aid legibility under workshop lighting, so measurements are taken with confidence even during busy production runs. Practical handling that speeds up routine work A compact housing and integrated belt clip keep the tape accessible and ready for frequent use; the result is reduced downtime between operations. The tape’s blade is calibrated in metric increments to match drawing standards and inspection sheets, enabling direct transfer of values without conversion. A simple snap lock (typical of pocket measures in this class) secures the blade for one-handed marking, improving efficiency when working alone or on ladders. Fewer handling steps lead to quicker layout and less process friction. Dependable supply and advice from a precision partner Sourcing this pocket tape from Metav ensures steady availability and specialist advice tailored to workshop requirements. Metav’s inventory approach focuses on accessibility for trades and industry, so acquiring a compact metric tape is straightforward and supported by clear product data. For operations seeking to rationalise suppliers while maintaining measurement quality, the combination of a straightforward tape measure and a transparent partner reduces procurement complexity and supports consistent measuring practices across teams. For secure, metric-ready measuring on every job, choose the STANLEY Tylon™ pocket tape measure and contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000787012NW Type: Tylon™ Brand: STANLEY Product type: Pocket tape measure Label: Taschenrollbandmaß Tylon™ L.5m B.19mm mm/cm EG II Ku.Gürtelclip SB STANLEY Facts Measuring length: 5 m (5,000 mm) Blade width: 19 mm Graduation: mm/cm Packaging unit: 1 Special features Belt clip Tylon™ type Packaging: SB FAQ Is the tape calibrated in metric only or also imperial scales? The STANLEY Tylon™ pocket tape measure is calibrated in mm/cm as stated, providing metric graduations for direct use with metric engineering drawings. What is the blade width and why does it matter? The blade is 19 mm wide; greater blade width improves rigidity during extended pulls, helping to reduce sag and improve measurement accuracy. Can the tape be carried on a belt? Yes, the tape includes a belt clip for secure pocket or belt attachment, allowing ready access during routine tasks. Is this tape suitable for site and workshop use? The 5 m length and clear metric graduations make this pocket tape suitable for typical workshop layout and on-site measuring where precision and portability are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Vario Pocket Tape Measure 16mm Blade EG Accuracy Class I (±0.7 mm/m) Ku.Festst.BMI - BMI
Take advantage of precise millimetre graduations, robust construction and a smooth automatic rewind for reliable day-to-day measuring; order directly via Metav Werkzeuge or consult our experts for application advice. VARIO pocket tape measure — 5 m, 16 mm, EG Class I accuracy (BMI) The VARIO pocket tape measure is a compact, rugged measuring tool designed for workshop and site use, offering millimetre graduations and EG Class I accuracy for repeatable results Ergonomic, impact-resistant housing 5 m length with millimetre graduations EG Class I accuracy ±0.7 mm/m Automatic rewind with stop button Professional accuracy for routine measuring The compact measuring tape delivers reliable precision with a 5 m length and mm/mm graduations, allowing consistent results for a wide range of tasks. The device meets EG Class I requirements and specifies a tolerance of ±0.7 mm/m, which means measurements remain dependable across typical workshop distances. This technical certainty reduces rework and supports efficient planning on jobs where millimetre accuracy matters. Built for everyday durability and comfort An ergonomic housing made from glass-fibre reinforced polyamide ensures both impact resistance and a secure grip during prolonged use. The casing design minimises slippage and resists knocks common in workshop environments, so the tape maintains its functionality under frequent handling. The compact format combined with robust materials means the instrument balances portability and long-term durability. Smooth operation that saves time on the job A refined internal mechanism provides a smooth running of the blade** and an automatic rewind that is controlled by a convenient stop button. The integrated locking device holds measurements instantly, preventing tape run-out during marking or cutting. These features shorten task times by keeping both hands free for layout work and ensuring quick, repeatable readings in fast-paced situations. Suitable for trades and workshop workflows The combination of a narrow 16 mm blade and millimetre graduations makes this pocket tape ideal for carpentry, installation, sheet-metal work and general maintenance. Its robust build and precise graduation support consistent outcomes on-site or in the workshop, while the compact form factor fits easily into a toolkit or pocket. The instrument represents a practical balance of functionality and everyday reliability. For technical advice or to confirm suitability for specific tasks, contact Metav Werkzeuge — local stock and shipping from Emmerich, with fast response from our specialists at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000855035NW Model: VARIO Product type: Pocket tape measure Brand: BMI Facts Length: 5,000 mm Blade width: 16 mm Graduation: mm/mm Accuracy: EG Class I (± 0.7 mm/m) Packaging unit: 1 Special features Ergonomic, impact-resistant housing Glass-fibre reinforced polyamide case Automatic rewind with stop button Integrated locking mechanism (Feststeller) Smooth blade running mechanism Millimetre graduations both sides FAQ How accurate is the measuring blade? The blade is classified as EG Class I with a tolerance of ± 0.7 mm/m, so the VARIO pocket tape measure provides consistent millimetre-level accuracy for workshop and site tasks. What material is the housing made from? The casing is made from impact-resistant, glass-fibre reinforced polyamide, offering durability and a secure grip for everyday use. Does the tape offer an automatic rewind and lock? Yes, the device features an automatic rewind with a stop button and an integrated locking mechanism to hold measurements securely. Is the blade suitable for narrow or detailed work? The 16 mm blade width with mm/mm graduations is well suited to detailed layout tasks such as joinery, installation and metalwork where compactness and accuracy are required. Can the VARIO withstand workshop conditions? The reinforced polyamide housing and robust internal mechanism are designed for regular handling and the typical mechanical stresses of workshop and site environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Assembly Square Double-T Aluminium‑Magnesium Alloy Grade 0, Flatness 0.005mm - Metav IndustryLine
Take advantage of the combination of a lightweight aluminium‑magnesium alloy, Grade 0 geometry and a compact 500 × 60 × 30 mm profile for rapid, reproducible alignment and inspection tasks; order the Assembly Straightedge M214.742 directly via Metav Werkzeuge or consult our specialists if required. Assembly Straightedge M214.742 — 500 × 60 × 30 mm, Al‑Mg alloy, Grade 0 The Assembly Straightedge M214.742 is an aluminium‑magnesium alloy alignment aid designed for workshop assembly and fixture inspection, delivering Grade 0 flatness for reproducible positioning and visual checks. Assembly straightedge M214.742, Al‑Mg alloy Grade 0 accuracy with 0.005 mm flatness 500 × 60 × 30 mm profile, lightweight 0.8 kg Robust HV 80 surface hardness Reliable geometry for repeatable alignment The straightedge’s Grade 0 specification and measured flatness of 0.005 mm ensure a stable reference surface for assembly, alignment and visual inspection tasks. Such tight geometry permits reliable contact with workpieces and fixtures, reducing setup variance and supporting consistent line‑of‑sight checks. The provided numerical tolerances make the tool suitable for quality assurance stations where objective, comparable references are required. Lightweight handling with workshop resilience Constructed from an aluminium‑magnesium alloy, the profile combines low weight (0.8 kg) with structural stiffness across its 500 mm length, enabling single‑operator handling while maintaining positional integrity. The HV 80 surface hardness contributes to wear resistance during routine use, and the alloy’s mechanical properties — yield strength 110 kg/mm² and tensile strength 47 kg/mm² — provide a balance of rigidity and toughness for everyday assembly operations. Practical integration into production workflows The 500 × 60 × 30 mm format offers a practical compromise between reach and manoeuvrability, making it appropriate for bench assembly, jig setup and small‑batch inspection. The profile’s controlled parallelism of 0.005 mm supports cross‑check measurements and alignment against existing datum surfaces. In production environments this straightedge functions as a straightforward, dependable datum for visual and contact‑based verification without the complexity of larger equipment. Choose Metav IndustryLine’s Assembly Straightedge for consistent, workshop‑ready alignment and contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: M214.742 GTIN: 4054469184500 Manufacturer: Metav IndustryLine Facts Length: 500 mm Overall height: 60 mm Width: 30 mm Weight: 0.8 kg Flatness: 0.005 mm Parallelism: 0.005 mm Hardness: HV 80 Yield strength: 110 kg/mm² Tensile strength: 47 kg/mm² Special features Material: Aluminium‑magnesium alloy Grade: Güte 0 (Grade 0) geometry Application: Alignment, assembly, visual inspection Compact profile for single‑operator handling Designed for reproducible reference measurements FAQ What level of flatness does the straightedge offer? The Assembly Straightedge M214.742 is supplied with a flatness specification of 0.005 mm, corresponding to Grade 0 geometry suitable for precise alignment and inspection tasks. Is the profile suitable for fixture and jig setup? Yes; the 500 × 60 × 30 mm format and parallelism of 0.005 mm make this Metav IndustryLine straightedge appropriate for fixture alignment, jig setup and bench assembly where a stable reference is required. How does the material affect handling and durability? The aluminium‑magnesium alloy results in a lightweight tool (0.8 kg) that is easy to manoeuvre, while the HV 80 surface hardness and specified mechanical strengths support routine workshop durability. Can the straightedge be used as a measurement reference in quality control? The Grade 0 geometry and the stated tolerances allow the straightedge to serve as a reliable reference for visual checks and contact comparisons in standard quality‑assurance procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Flexible Bending Scale Double-Sided Graduations 1/2mm Top 1mm Bottom Stainless Steel - Metav IndustryLine
Take advantage of a flexible stainless-steel measuring rule with double-sided graduations and a slim 13×0.5 mm profile that combines reach and manoeuvrability for workshop tasks; order or request advice through Metav Werkzeuge for tailored delivery and technical guidance. M214.194 Bending Scale — flexible stainless-steel rule with double-sided graduations M214.194 is a versatile bending scale designed for measurements on curved and flat surfaces in metalworking and workshop environments, featuring a flexible profile and dual graduations for fine and coarse reading. Flexible stainless-steel construction Double-sided graduations: 1/2 mm and 1 mm 500 mm measurement range with 13×0.5 mm profile Low weight 0.04 kg for easy handling Greater reach with controlled flexibility The bending scale is built from stainless steel, combining corrosion resistance with a controlled springiness that allows conforming to pipes, profiles and curved surfaces without permanent deformation. With a 500 mm measuring range and a slender 13×0.5 mm cross-section, the rule offers an effective balance between reach and torsional stiffness. This makes it suitable for assembly checks, template transfer and on‑site verifications where a rigid straight edge would be impractical. The flexible behaviour reduces the need for additional supports, improving workflow efficiency and saving set‑up time. Dual graduation for fast, reliable readings Equipped with double-sided graduations, the scale provides 1/2 mm divisions on one side and 1 mm divisions on the other, enabling both finer layout work and quick coarse measurements. The two graduations support a straightforward measurement flow: use the finer side for marking and the coarser side for rapid checks. The clear, machine‑finished markings minimise parallax and ensure consistent repeatability when comparing components. This feature supports rational decision‑making on the shop floor, as measurement data can be taken and acted on without additional tools. Lightweight handling and workshop practicality Weighing just 0.04 kg, the rule is exceptionally lightweight, reducing operator fatigue during repetitive tasks and easing transport between workstations. The slim profile fits into pockets, tool rolls or inspection kits, while the stainless-steel construction withstands daily use and cleaning. The flexible design is flagged as a deliberate characteristic, not a defect, allowing the rule to be used as a template for bending and trimming operations. For many workshops this means fewer tool changes and a smoother production rhythm. Suitable for mid-range workshop tasks Classified at the upper limit of the mid-range measurement class (up to 500 mm), the product bridges everyday bench work and larger assembly checks. Its dimensions and cross-sectional geometry provide a pragmatic compromise between reach and rigidity, making it a practical instrument for metalworkers, fabricators and fitters who require dependable measuring standards without resorting to heavier long‑stock gauges. The familiar, simple geometry keeps training time minimal and supports rapid adoption on the shop floor. Contact Metav Werkzeuge in Emmerich for product availability and technical advice — Metav Werkzeuge can supply the M214.194 bending scale and advise on the best measuring strategy for the application Technical Data Article number: M214.194 GTIN: 4054469107158 Manufacturer: Metav IndustryLine Facts Measurement range: 0–500 mm Length: 500 mm Cross-section: 13×0.5 mm Weight: 0.04 kg Tariff number: 90178010 eClass: 21160101 Special features Double-sided graduations — top: 1/2 mm, bottom: 1 mm Flexible execution Material: stainless steel Category: Lineale SKU: M214.194 FAQ What is the measuring range of this bending scale? The bending scale provides a measurement range of 0–500 mm and is designed for mid-range workshop tasks. Can the rule be used on curved surfaces without damage? Yes, the flexible stainless-steel design of the M214.194 allows repeated use on curved profiles while maintaining its measurement accuracy. Which graduations are marked on the rule? The rule features double-sided graduations with 1/2 mm divisions on one face and 1 mm divisions on the other for fine and coarse work. Is the material corrosion-resistant? The tool is made from stainless steel, which offers corrosion resistance suitable for regular workshop conditions. What applications suit this bending scale best? Typical uses include template transfer, pipe and profile measurement, assembly checks and quick layout work in fabrication and metalworking environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Flexible Bending Scale Double-Sided Graduations Top 1/2mm Bottom 1mm, Stainless Steel - Metav IndustryLine
Take advantage of a compact, flexible measuring tool that combines corrosion‑resistant stainless steel construction with clear double‑sided graduations (top 1/2 mm, bottom 1 mm) for fast, reliable layout work; order the rule directly via Metav Werkzeuge or consult the Metav team for application advice. M214.197 — Flexible steel rule, 500 mm, double-sided graduations The M214.197 is a flexible steel rule designed for medium‑range layout and profiling tasks in workshops and production environments. Flexible stainless steel construction for contours Double-sided graduations for fine and coarse marking 500 mm length for medium-range measurement Slim 18 x 0.5 mm profile for easy handling Precision where flexibility matters A flexible measuring rule built from stainless steel allows reliable measurements on flat and curved surfaces without sacrificing legibility. The 500 mm length places this tool in the medium‑range category (suitable for larger components while remaining easy to guide by hand), and the double‑sided scale with 1/2 mm divisions on one face and 1 mm on the other speeds up layout work by offering a fine and a coarse scale in a single instrument. The combination of flexibility and a slim cross‑section supports quick transfer of dimensions while keeping the tool rigid enough for repeatable marks. Practical benefits for workshop layout and profiling The slim 18 x 0.5 mm profile balances manoeuvrability with sufficient stiffness for everyday use; it lies flat on surfaces yet bends when needed to follow contours, which reduces measuring time on pipes, chassis parts and formed sheet. At approximately 0.06 kg, the rule is lightweight and suitable for one‑hand operation during marking or scribing. Having both fine and coarser graduations on opposing faces eliminates frequent scale changes and reduces the likelihood of transcription errors, contributing to a faster and more efficient workflow on the shop floor. Durable design for everyday reliability Manufactured from corrosion‑resistant material and finished for long service life, this measuring rule withstands typical workshop conditions and keeps graduations legible over extended use. The flexible execution reduces the risk of permanent bending compared with softer alloys, while the clear dual markings support multi‑step measurements without additional tools. Supplied as a compact, easy‑to‑store rule, the instrument supports consistent results for layout, profiling and quick checks across a wide range of medium‑sized components. For tailored advice on integrating the Metav IndustryLine flexible steel rule into production workflows or to secure this measuring rule via Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M214.197 GTIN: 4054469107172 Tariff number: 90178010 ECLASS: 21160101 Dimensions and core data Length: 500 mm Cross section: 18 x 0.5 mm Measurement range: 0–500 mm Weight: 0.06 kg Materials and special features Material: stainless steel Graduations: double‑sided — top 1/2 mm, bottom 1 mm Execution: flexible design Classification: Medium‑range (300–500 mm) FAQ Can the rule measure curved surfaces accurately? Yes. The Metav IndustryLine flexible steel rule M214.197 is designed to follow contours and provides accurate linear readings when applied correctly to curved surfaces. Which applications is this rule best suited for? The tool is ideal for layout, profiling and marking of medium‑sized components such as pipes, sheet metal assemblies and fixtures where a 500 mm reach and flexible contact are beneficial. How visible are the graduations in workshop conditions? Graduations on the M214.197 are clear on both faces (1/2 mm and 1 mm), ensuring good legibility under normal workshop lighting and reducing measurement errors during marking. Is the material resistant to corrosion? Yes. The rule is made from stainless steel, offering enhanced corrosion resistance suitable for common workshop environments. Does the rule require special handling or storage? No specialised storage is necessary; keeping the rule flat or in a drawer avoids excessive bending. The flexible design allows routine use without impairing scale accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Flexible PET Measuring Tape 0.25mm Division, Transparent 25×0.1mm Cross-Section - Metav IndustryLine
Take advantage of a flexible PET-film design and a fine 0.25 mm graduation to handle medium-range measuring tasks with minimal fuss; the pliable, transparent construction makes circumference and length measurements quicker and more reliable. Order the item directly via Metav Werkzeuge or ask the consultants for application advice. Metav IndustryLine Flexible PET-film Scale, 500 mm, 0.25 mm graduation A flexible PET-film scale for measuring distance, length and circumference in workshop and craft applications Flexible PET-film construction, transparent Fine 0.25 mm graduation for precise readings 500 mm length for standard workshop tasks Slim cross-section 25 x 0.1 mm, easily stored Precise readings where flexibility is needed This flexible PET-film scale combines a transparent, pliable material with a 0.25 mm graduation to deliver accurate manual measurements for small to medium components. The thin, readable scale is suited to measuring both straight lengths and wrapped circumferences; the fine division reduces interpolation error and supports more consistent transfer of dimensions to production processes. The design prioritises reliable visual reading and quick adaptation to irregular shapes, so measurement cycles can be completed with fewer adjustments. Compact handling that speeds up routine tasks With a 25 x 0.1 mm cross-section the scale stays unobtrusive in a tool drawer and slips easily into inspection kits, enabling faster setup and reduced downtime between checks. The slim profile supports convenient one-handed handling while marking or recording, which shortens inspection times and lowers the risk of measurement interruptions. The practical form factor therefore contributes directly to improved workflow efficiency in repetitive measurement tasks. Balanced reach for workshop requirements Classified for the medium range (300–500 mm), this 500 mm length provides an effective compromise between reach and stiffness for many fixtures, housings and component assemblies. The scale’s flexibility does not sacrifice usability over this span; the material maintains sufficient profile to follow part contours while remaining easy to align. This balance makes it a dependable choice for machinists and technicians who require both scope and manageable handling in day-to-day measuring. Durable material suited to practical use Made from PET, the scale is lightweight yet robust and resists typical workshop soiling without affecting legibility. The transparent film aids visual alignment against markings and edges, while the flexibility enables wrap-around checks on circular parts. These characteristics support repeated use in inspection and layout work, reducing the need for auxiliary fixtures or awkward workaround methods when measuring non-planar surfaces. For precise, flexible medium-range measuring, request the Metav IndustryLine flexible PET-film scale via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com for tailored application advice Technical data Article number: M203.142 Manufacturer: Metav IndustryLine Designation: Flexible PET-film scale, 500 mm, 0.25 mm graduation SKU: M203.142 Facts Length: 500 mm Graduation: 0.25 mm Cross-section: 25 x 0.1 mm Special features Material: PET film Transparent and flexible For measuring distance, length and circumference FAQ What applications is this flexible PET-film scale suitable for? The flexible PET-film scale is designed for measuring distances, straight lengths and circumferences, making it suitable for layout, inspection and craft applications in workshops. How fine is the graduation and what does that mean in practice? With a 0.25 mm graduation the scale provides finer visual resolution than typical 1 mm rules, supporting more accurate manual readings and reducing interpolation when transferring dimensions. Does the material withstand workshop conditions? The scale is manufactured from PET film, which is lightweight and resistant to typical workshop soiling; the transparency preserves legibility for repeated use. Is this length suited to general workshop measurement tasks? At 500 mm the scale falls into the medium range (300–500 mm) and offers a balanced combination of reach and manageable handling for many common components and assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Hairline Rule, Hardened Ground Stainless Steel, DIN 874/00, 1.6 kg - Metav IndustryLine
Benefit from the combination of hardened INOX steel, DIN 874/00 tolerance class 00 and a 500 mm measuring length for dependable flatness and alignment checks; the construction supports repeatable reference measurements in workshop and inspection settings. Order the straight edge directly via Metav Werkzeuge or consult our product specialists for application guidance. Hairline straight edge INOX 500 mm DIN 874/00 — hardened stainless steel (Metav IndustryLine) A Hairline straight edge INOX 500 mm DIN 874/00 designed for precision alignment, flatness verification and reference measurements in metrology and workshop environments. Hardened stainless steel, ground and lapped Compliant with DIN 874/00 tolerance class 00 500 mm measuring length for workshop use Robust construction for repeatable alignment Consistent reference accuracy for inspection and set-up The straightedge is built from INOX steel, fully hardened, ground and lapped to deliver a stable reference surface that resists wear and distortion. Compliance with DIN 874/00 and the declared tolerance class 00 ensures that the tool provides a known geometric standard for alignment, bench checks and machine set-up. The finished surface and precise edge geometry minimise local deviations, which makes the instrument suitable as a comparison gauge for visual, feeler‑gauge and optical checks, supporting faster decision making on the shop floor. Practical dimensions and workshop usability At a 500 mm length the straightedge balances reach and rigidity: long enough to span typical workpieces yet compact enough for single‑operator handling and storage. The profile and hardened construction improve resistance to nicks and bending, which helps maintain repeatable accuracy in daily use. The product’s finish reduces sticking and makes surface inspection straightforward, while the weight and geometry favour stable placement on flat references and component faces—benefits that increase throughput during alignment and assembly tasks. Clear specification for purchasing and integration The specification focuses on measurable characteristics and conformity, offering a transparent basis for procurement and quality planning. The straightedge’s designation underlines its intended use as a precision tool for alignment and flatness verification in machine shops and inspection labs. As a branded Metav IndustryLine product, it fits into a broader supply chain of calibrated references and measuring equipment, allowing straightforward substitution in existing workflows and inventory systems. Contact Metav Werkzeuge for detailed specification comparisons or to request a tailored offer for measurement equipment in Emmerich; our technical team can advise on selecting the right reference tools for workshop and inspection applications. Technical data Article number: M214.125 GTIN: 4054469106755 eClass: 21170120 Facts Length: 500 mm Tolerance class: 00 Tariff number: 90173000 Special features Material: INOX steel, fully hardened, ground and lapped Standard: DIN 874/00 Brand: Metav IndustryLine FAQ What tolerance class does this straight edge meet? The Hairline straight edge INOX 500 mm DIN 874/00 is specified to tolerance class 00 under DIN 874/00. Which material is used for the straight edge? The straight edge is manufactured from INOX steel that is fully hardened, ground and lapped for wear resistance and stable reference surfaces. Is the product suitable for flatness and alignment checks? Yes, the Hairline straight edge INOX 500 mm DIN 874/00 is intended as a reference tool for flatness verification, alignment and inspection tasks in workshops and inspection areas. How should the straight edge be maintained? Maintain the straightedge by keeping surfaces clean and free from debris; use light machine oil for corrosion protection where required and store on a flat, protected surface to preserve the ground and lapped reference faces. Can the straight edge be integrated into an existing inspection workflow? The Metav IndustryLine hairline straight edge (SKU M214.125) is specified for use as a workshop and inspection reference and can be incorporated into existing measurement processes that rely on DIN 874/00 standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Stainless Steel Rule Double-Sided Graduations 1/2mm Top 1mm Bottom, Rigid - Metav IndustryLine
Take advantage of the combination of rigid stainless-steel construction, dual-sided graduations (1/2 mm and 1 mm) and a slim 30 x 1 mm profile for accurate, repeatable layout work; order the steel rule directly via Metav Werkzeuge or ask our consultants if needed. Steel rule M214.184 — rigid stainless-steel rule, double-sided graduations (500 mm) — Metav IndustryLine A steel rule, 500 x 30 x 1 mm, designed for precise workshop measurement, layout and marking with dual graduations for versatile use across metalworking and assembly tasks Rigid stainless-steel construction Dual-sided graduations: 1/2 mm & 1 mm 500 mm length, 30 x 1 mm profile Corrosion-resistant finish for longevity Designed for reliable, repeatable workshop measurement The rigid construction and stainless-steel material provide a stable reference for layout and inspection tasks, reducing flex and user-induced variation during use. At a 500 mm working length the rule bridges the practical gap between reach and stiffness, making it suitable for bench work and on-machine layout alike. The slim 30 x 1 mm profile keeps weight low while preserving a straight edge for scribing, and the lightweight design supports frequent handling without fatigue. This combination promotes consistent results and faster cycle times where simple, robust precision is required. Faster marking and clearer readings with dual graduations Two facing scales—1/2 mm on the top edge and 1 mm on the lower edge—allow selection of the most convenient resolution for the task. Fine positioning or incremental marking benefits from the half-millimetre scale, while coarse layout and rapid checks use the full-millimetre graduations. The clear, double-sided layout reduces steps in the workflow and minimises the need to swap tools, improving throughput on repetitive jobs and supporting efficient shopfloor routines. The visible gradations and straight edge simplify transfer of measurements to components and fixtures. Built for longevity and low maintenance Manufactured from stainless steel, the rule resists corrosion in workshop environments and maintains legibility of the scale over prolonged use. The rigid design resists bending during normal handling and under light clamping, which contributes to sustained accuracy over time and fewer tool replacements. A compact cross-section and a low mass (approx. 0.1 kg) make the rule easy to store and manoeuvre while remaining robust enough for day-to-day industrial tasks. The result is a maintenance-light measuring tool that supports continuous operation. Certified sourcing and professional supply chain advantages Sourced and distributed under the Metav IndustryLine umbrella, the rule benefits from Metav’s European quality filter and logistics from Emmerich. The product harmonises simple, workshop-focused design with dependable supply and traceability, making it a pragmatic choice for production workshops, tool rooms and maintenance teams. Metav’s broad catalogue and track record are designed to reduce procurement complexity and supply risks for industrial customers who need dependable measuring equipment on demand. For procurement of the rigid 500 mm stainless-steel rule from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for ordering and technical advice. Technical data Article number: M214.184 GTIN: 4054469107080 ECLASS: 21160101 TARIC (Customs) number: 90178010 Numbers / Core technical data Length: 500 mm Cross-section: 30 x 1.0 mm Weight: 0.1 kg Measurement range: 0–500 mm Top graduation: 1/2 mm Bottom graduation: 1 mm Designs / Special features Material: stainless steel Rigid design Double-sided graduations Slim, easy-to-handle profile FAQ What material is the rule made from? The steel rule M214.184 is made from stainless steel, supplied under the Metav IndustryLine brand for corrosion resistance and workshop durability. Which graduations are printed on the edges? The rule features dual-sided graduations with a 1/2 mm scale on the upper edge and a 1 mm scale on the lower edge to cover fine and coarse layout tasks. Is the rule suitable for machine-shop layout and marking? Yes, the 500 mm length and rigid stainless-steel profile make the rule suitable for bench and machine-shop layout where a stable, repeatable edge is required. What are the product identifiers for ordering and traceability? Use SKU/Article number M214.184 and GTIN 4054469107080 when ordering or recording the item in inventory. How does the slim profile affect handling? The 30 x 1 mm profile keeps the rule lightweight (approx. 0.1 kg) and easy to manoeuvre while maintaining sufficient stiffness for accurate scribing and layout. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Steel Straightedge Blackened, Hardened Ground And Lapped, DIN 874/00 - Metav IndustryLine
Take advantage of a precision inspection tool that combines DIN 874/00 conformity with a robust, fully hardened and lapped working surface for repeatable straightness checks; the compact 500 mm length ensures easy handling and fast set-up in production control. Order the straight edge directly via Metav Werkzeuge or ask our consultants for a specification recommendation. Hairline straight edge M214.025 — 500 mm, hardened tool steel (Metav IndustryLine) The Hairline straight edge 500 mm is a precision inspection reference designed for flatness and straightness verification in workshop and quality‑control environments. DIN 874/00 grade 00 accuracy Hardened, ground and lapped working surface Black blued corrosion‑resistant finish Compact 500 mm length for easy handling A dependable reference for inspection and setup A carefully manufactured straightedge is a simple way to raise the reliability of routine inspections. Conforming to DIN 874/00 and classified as grade 00, this inspection tool provides a consistent reference for straightness and flatness checks on machine beds, gauge blocks and finished parts. The combination of a finely lapped surface and visible hairline edge assists optical alignment tasks and ensures that deviations are revealed quickly, reducing inspection time and avoiding costly rework. Built for repeatability and long service life Constructed from tool steel, the rail is fully hardened, then ground and lapped to create a stable measuring face that resists distortion under normal workshop use. The black blued finish gives basic protection against corrosion while maintaining the precision of the mating surface. These attributes translate into durable performance: fewer replacements, predictable inspection results and a lower cost of ownership over the tool’s service life. The solid construction supports repeatable checks that are meaningful for production control and process validation. Easy handling, care and workshop integration At 500 mm the format balances reach and stiffness, allowing single‑person use without compromising rigidity. The slim hairline edge provides a clear sightline for optical checks and for use with feeler gauges or scribing operations. Routine care is straightforward: keep the working face clean and free of chips, avoid heavy impacts, and store the rail in a protective sleeve or drawer when not in use to retain its geometry. Integration into standard inspection routines is immediate, supporting faster set‑up and simpler quality documentation. Contact Metav Werkzeuge for a technical consultation or to request a quotation for the Metav IndustryLine hairline straight edge M214.025 Technical Data Article number: M214.025 GTIN: 4054469106168 Standard: DIN 874/00 Facts Length: 500 mm Grade: 00 Tariff code: 90173000 Special features Material: tool steel, fully hardened, ground and lapped Surface: black blued finish Category: Lineal / inspection straightedge FAQ What is the typical use for this straight edge? The hairline straight edge M214.025 from Metav IndustryLine is intended for visual and tactile straightness and flatness checks in workshops and quality control, as a reference for machine set‑up and for quick inspection of finished parts. Which standard and accuracy does it meet? This product complies with DIN 874/00 and is classified as grade 00, providing a fine reference level suitable for workshop inspections where a precise flatness reference is required. What is the construction and finish of the rail? The straight edge is made from hardened tool steel, ground and lapped for a fine working face, and supplied with a black blued finish for basic corrosion protection. How should the straight edge be maintained to keep accuracy? Clean the working face after use, protect it from knocks and abrasive particles, and store the rail in a padded drawer or sleeve to avoid nicks that could affect measurement repeatability. Is the 500 mm length suitable for all workshops? The 500 mm length offers a good compromise between reach and stiffness for most workshop tasks; for other length requirements please contact Metav Werkzeuge for advice and available options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Wooden Case For Hairline Rules - Metav IndustryLine
Take advantage of a sturdy wooden transport solution that pairs secure protection with a precise fit for 500 mm hairline rulers, keeping measuring instruments ready for immediate use; order directly via Metav Werkzeuge or ask the advisers for further details. Wooden case M214.025.K – transport case for 500 mm hairline rulers (Metav IndustryLine) Wooden case M214.025.K is a robust wooden transport case designed to protect and store 500 mm hairline rulers in workshop and inspection environments Robust wooden construction for safe storage Fits 500 mm hairline rulers precisely Lightweight at 1.9 kg for easier handling Protects measuring edges and surfaces Secure storage that preserves measurement accuracy A dedicated wooden transport solution provides reliable protection for delicate measuring instruments. The precise internal fit for 500 mm hairline rulers prevents lateral movement and abrasion during transport or storage, which preserves the delicate hairline edge and calibration status. By limiting mechanical stress on the scale and edges, the box contributes to fewer reworks and reduced downtime in the workshop, supporting a steady inspection routine and dependable measuring results. Practical handling that speeds up workshop workflows Designed with workshop routines in mind, this transport case combines lightweight handling (1.9 kg) with a compact footprint to simplify movement between bench, machine or inspection station. The tidy storage arrangement reduces time spent searching for the correct ruler and streamlines shift handovers; instruments remain organised and ready for immediate use. The result is a modest but tangible improvement in operational efficiency for metalworking and quality-control tasks. Durable construction to protect investment and support longevity A wooden protective case offers long-term resistance against knocks and scratches while remaining a straightforward, low-maintenance container for precision tools. The construction minimises moisture exchange and surface damage compared with loose storage, so calibration intervals remain predictable. For organisations that rely on consistent measuring performance, the box supports tool preservation and contributes to sustained measurement reliability across routine production and inspection cycles. Order the Metav IndustryLine wooden transport case now via Metav Werkzeuge in Emmerich for reliable protection of 500 mm hairline rulers; for specification queries or to confirm compatibility the Metav team is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.025.K GTIN: 4054469160719 Manufacturer: Metav IndustryLine Numbers / Core technical data Weight: 1.9 kg Fits: 500 mm hairline rulers Design / Special features Wooden transport case Protects precision edges and surfaces Image: m214025k-main.png FAQ How many hairline rulers fit inside the case? The wooden case M214.025.K is designed specifically to accommodate a 500 mm hairline ruler; the internal layout secures a single instrument for transport and storage. Does the case protect the measuring edges during transport? Yes, the Metav IndustryLine wooden case provides a precise internal fit that prevents movement and surface contact, helping to protect the hairline ruler's edges and scale graduation. Is the case suitable for workshop use and frequent handling? The case’s robust wooden construction and modest weight (1.9 kg) make it appropriate for regular workshop handling and short-distance transport between benches and inspection areas. Is an image available to verify the design before ordering? An image file (m214025k-main.png) is provided in the product assets to review the case design and dimensions visually Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Accurate checks with precision straightedges
Precision straightedges are high-accuracy measuring tools designed to verify flatness and straightness across surfaces. Available in several lengths and finished from durable metals, these instruments provide a simple, repeatable method for alignment and inspection in industrial settings.
How precision straightedges work and where they are used
A precision straightedge is laid against a surface to reveal deviations from true flatness or a straight line, with fine graduations enabling careful assessment of run-out and planar error. Typical applications include mechanical engineering, electronics, optics and microscopy, machine tool build and quality control, where reliable visual or feeler-gauge inspection prevents assembly issues and functional failure.
Key advantages that cut waste and speed up production
- high accuracy and stable construction reduce measurement uncertainty and help maintain production tolerances.
- stainless steel or other precision metals ensure long service life and corrosion resistance.
- fine graduations and etched scales allow precise readings and repeatable checks.
- various lengths suit bench work as well as larger components, shortening setup time.
- simple handling lowers inspection time and contributes to fewer rejects and rework.
Why Metav is the practical choice for precision straightedges
Metav combines decade-long expertise with a broad range of measurement tools, making it a pragmatic partner for workshop and production buyers. With over 48,000 customers and a catalogue exceeding 250,000 products, Metav operates from Emmerich as a quality filter for the european market, offering consistent availability and straightforward order processing. For those seeking a reliable source of precision straightedges and complementary measuring instruments, Metav’s range and technical information help select the correct specification for the intended inspection task.
In brief
Precision straightedges deliver fast, reliable assessments of flatness and straightness across industries, improving quality control and reducing scrap while being simple to use and maintain.
FAQ
What materials are precision straightedges typically made from?
Precision straightedges are commonly manufactured from stainless steel or other precision metals to ensure stability, wear resistance and longevity in industrial use.
In which industries are precision straightedges most valuable?
Precision straightedges are widely used in mechanical engineering, electronics, optics and microscopy, machine tool construction and general quality control where geometric accuracy is critical.
How is a precision straightedge used to check flatness?
Place the precision straightedge on the surface and inspect gaps visually or with feeler gauges; fine graduations and a straight reference edge make deviations from flatness evident for correction or further machining.
Are different lengths available for precision straightedges?
Yes, precision straightedges are offered in various lengths to match bench-top inspections as well as larger component checks, allowing selection of the most efficient tool for each application.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com