Precision specialist calipers for inaccessible measurements
Specialist calipers are engineered to measure fine grooves, deep bores and complex contours with reproducible accuracy down to the micrometre, delivering reliable results where standard calipers reach their limits. Designed with customised jaw shapes and robust materials such as carbide or ceramic tips, these calipers excel in measuring thin-walled aerospace structures, medical implants and intricate toolroom cavities while resisting coolants and abrasion. Available as digital, analogue and inductive variants, they offer options from quick-read displays and data transfer to extreme accuracy of ±0.001 mm for laboratory use. By combining tailored jaw geometries with durable construction, these precision tools improve inline quality control and support both prototype and series production.
250mm Digital Caliper Flat Jaws 75mm Lower/55mm Upper, Stainless Steel Housing, IP Not Specified - Metav IndustryLine
Take advantage of a balanced combination of 250 mm measuring range, hardened stainless steel construction and a clear digital display for consistent shop-floor throughput; order or request tailored advice via Metav Werkzeuge. Metav IndustryLine digital caliper M240.057 — 250 mm, flat gripping tips The Metav IndustryLine digital caliper M240.057 is a 250 mm range caliper designed for routine dimensional control in machines shops and fabrication environments, offering flat gripping tips for reliable contact on small and awkwardly shaped workpieces 250 mm measuring range for workshop use Hardened stainless steel construction, metal housing Digital display with On/Off, Zero, Unit, Hold Flat jaws 75/55 mm ideal for tight geometries Dependable everyday performance that reduces rework The instrument is classified as a Standard range caliper for general machine‑shop tasks and combines reach with rigidity: the 250 mm span gives access to typical components while the compact jaw geometry preserves stiffness. With a display resolution of 0.01 mm and a declared accuracy of ±0.04 mm, the device is suited to workshop quality control where reproducible results matter. The relatively light weight and balanced proportions make repeated checks less tiring and help maintain cycle times on production lines. Fast measurement capture and straightforward data handling A clear digital display provides immediate read‑out and the keypad offers On/Off, Zero, Unit and Hold functions for quick adaptation to different measuring routines. The caliper includes an RB 5 data output interface to feed recorded values into inspection software or a portable data logger, accelerating documentation and reducing transcription errors. Powered by a 3 V cell, the unit supports uninterrupted shifts with simple battery replacement, improving measurement throughput in repetitive tasks. Robust materials for repeatable accuracy Constructed from hardened stainless steel with a protective metal housing, the instrument resists everyday abrasion and maintains dimensional stability under shop conditions. Flat measuring tips of 75 mm (lower) and 55 mm (upper) ensure dependable contact on flats and shoulders, while the corrosion‑resistant surfaces reduce maintenance. The build quality supports stable calibration intervals and helps retain measurement certainty over time, which is vital for components that enter assembly or further machining. Practical features for common workshop operations Designed for internal measurements from 10 mm and general external checks, the caliper integrates into standard inspection routines without requiring elaborate setup. The combination of flat gripping tips and the compact display layout makes it easier to measure stepped geometries and shallow bores that are awkward for larger instruments. The balance of reach, resolution and robustness makes this a pragmatic choice for maintenance teams, toolrooms and production inspectors who prioritise speed and repeatability. Contact Metav Werkzeuge for application advice, detailed specifications or to discuss how the Metav IndustryLine digital caliper M240.057 fits existing inspection routines in your workshop. Technical data Article number: M240.057 GTIN: 4054469182292 Brand: Metav IndustryLine eClass: 21170344 Facts Measuring range: 0–250 mm Resolution: 0.01 mm Declared accuracy: ±0.04 mm Weight: 0.5 kg Lower jaw length: 75 mm Upper jaw length: 55 mm Power supply: 3 V battery Special features Material: hardened stainless steel, metal housing Digital display with On/Off, Zero, Unit, Hold buttons Data output: RB 5 interface Suitable for internal measurements from 10 mm FAQ What measurement range does this caliper cover? The Metav IndustryLine digital caliper M240.057 covers a measuring span of 0–250 mm, making it suitable for standard workshop and machine‑shop tasks. What resolution and accuracy can be expected? Resolution is 0.01 mm and the declared accuracy is ±0.04 mm for the Metav IndustryLine digital caliper M240.057, which supports reliable routine checks. Is the caliper suitable for internal measurements of small bores? The caliper is specified as suitable for internal measurements from 10 mm upwards; measurements below this size are not recommended with this model. Does the instrument support data transfer to inspection systems? Yes, the caliper offers an RB 5 data output interface to export measured values into compatible inspection software or data loggers. What materials and finishes are used in the construction? The device is made from hardened stainless steel with a metal housing, providing corrosion resistance and mechanical stability for repeated shop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Depth Gauge With Round 2.5mm Probe, Auto Power-Off, 0.01mm Resolution - Metav IndustryLine
Take advantage of a compact, workshop‑ready design with a 0–25 mm measuring range and a Ø 2.5 mm round probe for accessible bore measurement; the integrated automatic switch‑off conserves the 3 V battery. Order the Digital depth gauge M218.091 directly via Metav Werkzeuge or ask our consultants if technical advice is needed. Digital depth gauge M218.091 – 0–25 mm, Ø 2.5 mm round probe (Metav IndustryLine) The Digital depth gauge M218.091 is a compact, battery‑powered instrument for precise depth measurement tasks in small‑part inspection and workshop use. Digital display with mm/inch and ABS function Automatic power-off to conserve battery Round Ø 2.5 mm depth probe for small bores Compact 0–25 mm range with 53 mm bridge Precise, compact depth measurement for fine tasks The instrument combines a clear digital display with a standard resolution of 0.01 mm and a stated accuracy of ±0.05 mm, making it suitable for routine workshop checks and quality control where repeatable results are required. The 0–25 mm measuring range places the device in the micro category for measuring tools, which is ideal for fine‑mechanical work and components with limited access. The round Ø 2.5 mm depth probe provides entry to narrow bores and recesses, while the 53 mm bridge supports stable alignment during measurement. The electronics include mm/inch, ABS and zero functions to facilitate quick conversion and reference setting. Lightweight handling and access to confined features Made from robust plastic, the gauge is deliberately lightweight at 0.35 kg, easing one‑handed operation and reducing operator fatigue during repetitive checks. The curved measuring faces and the small‑diameter probe permit measurements in confined cavities and stepped features without the need for additional fixtures. The compact dimensions and ergonomic form mean faster set‑up times on the shop floor and simpler handling for bench and assembly tasks. Where space is limited, the rounded probe and short measuring range enable accurate depth readings without overextending the instrument. Efficient operation, low running costs and dependable results Operation is straightforward thanks to a dedicated ON/OFF key and an automatic switch‑off that extends battery life; the gauge runs from a 3 V battery that is easy to replace. The ABS mode locks the reading to prevent drift when repositioning, saving time during comparative measurements. Routine cleaning of the measuring faces and careful handling of the probe maintain measurement quality; abrasive cleaning agents should be avoided to protect surfaces. Backed by Metav’s approach to accessible precision, the instrument offers a reliable combination of usability and measured performance for workshops and inspection stations. Contact Metav Werkzeuge for a tailored quotation or technical advice on the Metav IndustryLine M218.091; our Emmerich team is ready by e‑mail or phone. Technical data Article number: M218.091 GTIN: 4054469181431 Brand: Metav IndustryLine Facts Measuring range: 0–25 mm Resolution: 0.01 mm Accuracy: ±0.05 mm Bridge length: 53 mm Weight: 0.35 kg Special features Material: plastic Measuring faces: curved Measuring tip: Ø 2.5 mm round probe Power supply: 3 V battery Display functions: ON/OFF, ZERO, mm/inch, ABS Extra: automatic switch‑off FAQ What is the measuring range of this depth gauge? The Digital depth gauge M218.091 measures from 0 to 25 mm, classifying it in the micro range for fine‑mechanical and small‑part work. How accurate and precise are the readings? Readings are displayed with 0.01 mm resolution and the instrument specification lists an accuracy of ±0.05 mm for routine inspection tasks. Can the gauge measure inside small bores? Yes. The Ø 2.5 mm round probe is designed to access narrow bores and recesses for reliable depth checks with the Metav IndustryLine gauge. What functions are available on the digital display? The unit includes ON/OFF, ZERO, mm/inch conversion and ABS mode to lock reference readings, simplifying comparative and multi‑step measurements. Is the gauge suitable for repetitive workshop use? The lightweight plastic construction and automatic switch‑off make the gauge practical for frequent use; regular cleaning of the measuring faces is advised to ensure consistent results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital-Messschieber, 0,001mm Auflösung, IP 67 - Microtech Metrology
Präzise Kontrolle, Schutz und kompakte Bauform: Ideal für feinmechanische Messaufgaben mit hoher Auflösung. Nutzen Sie die Kombination aus hoher Messgenauigkeit, robuster Schutzart und handlicher Bauweise für verlässliche Prüfabläufe. Bestellen Sie den Messschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Messschieber von Microtech Metrology — Digitaler Präzisions‑Schieber Der Messschieber ermöglicht hochauflösende Längenmessungen mit digitaler Anzeige und robuster Schutzart für Werkstatt und Labor. IP67-Schutz für sichere Werkstattmessungen Digitale Anzeige, Höhe 9 mm, ablesbar auf 0,001 mm Mikro‑Messbereich bis 25 mm für feine Bauteile Hohe Auflösung für präzise Qualitätskontrollen Lieferung geprüft durch Microtech Metrology, SKU 142022606 Präzision für hochanspruchsvolle Messaufgaben Der digitale Schieber liefert eine Ablesung von 0,001 mm, was eine deutliche Steigerung der Messauflösung gegenüber üblichen Standardgeräten bedeutet. Dadurch werden kleinste Maßabweichungen sichtbar und die Wiederholgenauigkeit in Prüfabläufen erhöht. Anwender im Werkzeugbau und in der Feinmechanik profitieren von reproduzierbaren Ergebnissen, weil die feine Auflösung Verringerungen von Nacharbeiten und Ausschuss ermöglicht. Schutz und Langlebigkeit für raue Einsatzbedingungen Dank der IP67‑Schutzart ist das Messgerät gegen Eindringen von Staub und zeitweiliges Untertauchen geschützt, was die Einsatzfähigkeit in der Fertigung und in feuchten Werkstattumgebungen sichert. Die verschleißarme Ausführung der Anzeige und die dichte Elektronik reduzieren Ausfallzeiten, sodass sich Prüfprozesse stabil in den Produktionsablauf integrieren lassen. Kompakte Bauform für filigrane Messungen Mit einem Messbereich von maximal 25 mm gehört dieses Modell zur Mikro‑Klasse, die speziell für feinmechanische Arbeiten entwickelt wurde. Diese kurzbauende Konstruktion minimiert Verwindungen und erleichtert Einhandmessungen an kleinen Bauteilen wie Uhrwerksteilen, Präzisionszahnrädern oder feinen Gehäusekomponenten. Die handliche Form sorgt für ergonomisches Arbeiten und präzise Positionierung. Zielgruppenorientierte Einsatzmöglichkeiten Das Gerät richtet sich an Uhrmacher, Feinmechaniker, Laborfachkräfte und Qualitätssicherer, die hochgenaue Innen‑ und Außenmessungen erwarten. Der digitale Schieber eignet sich für Prüfplätze mit engen Toleranzen, die konstante Ergebnisse verlangen, und ergänzt bestehende Messmittel, ohne komplexe Schnittstellen vorauszusetzen. Empfehlung: Den Microtech Metrology Messschieber über Metav Werkzeuge anfragen und persönliche technische Beratung für Ihre Messaufgabe nutzen — per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 142022606 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905455445 Fakten Messbereich: 1–25 mm Ablesung: 0,001 mm Anzeigehöhe: 9 mm Besonderheiten IP67: Staub‑ und Strahlwasser geschützt Digitale Anzeige Kategorie: Messschieber Digital ECLASS: 21170344 FAQ Wie genau ist die Messung mit diesem digitalen Schieber? Der Microtech Metrology Messschieber (SKU 142022606) erreicht eine Ablesung von 0,001 mm und eignet sich damit für hochpräzise Kontrollen im Labor und in der Feinmechanik. Für welche Einsatzbereiche ist das Gerät besonders geeignet? Aufgrund des Mikro‑Messbereichs bis 25 mm ist der Schieber ideal für Uhrmacher, Feinmechaniker und präzise Qualitätsprüfungen an kleinen Bauteilen. Ist das Gerät für den Einsatz in feuchten Umgebungen geeignet? Ja, der Messschieber verfügt über die Schutzart IP67, wodurch er gegen Staub und zeitweiliges Eintauchen geschützt ist und sich für anspruchsvolle Werkstattbedingungen eignet. Welche Anzeige bietet das Gerät? Das Modell besitzt eine digitale Anzeige mit einer Höhe von 9 mm, die Messwerte klar lesbar darstellt und die präzise Ablesung von 0,001 mm unterstützt. Wird das Gerät kalibriert ausgeliefert? Informationen zur serienmäßigen Kalibrierung sind nicht in den vorliegenden Daten enthalten; bitte bei Bedarf die Kalibrieroptionen über Metav Werkzeuge abfragen. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30-330mm Digital Precision Caliper Colour Touchscreen, Wireless USB, IP54 - Microtech Metrology
Take advantage of precise shop-floor measurement, reliable data transfer and robust protection for uninterrupted inspection workflows; the combination of 0.005 mm resolution, Wireless+USB output and IP54 protection supports fast data capture and durable use—order or request advice via Metav Werkzeuge for tailored integration. Digital caliper by Microtech Metrology — 30–330 mm, Colour 1.5" touchscreen, Wireless+USB A digital caliper designed for medium-range precision measurement tasks in machine shops, inspection bays and production control. Colour 1.5" touchscreen for clear readouts Wireless + USB data output for traceable capture IP54 protection for industrial environments Measuring range 30–330 mm for medium-range work Precision that shortens inspection cycles The measuring device delivers a high 0.005 mm resolution that raises the precision level beyond standard workshop calipers. As a medium-range instrument (measuring capability up to 330 mm), it bridges bench-scale checks and larger component inspections without the handling compromises of longer tools. The improved resolution reduces uncertainty in pass/fail decisions and supports tighter tolerance checks while maintaining a practical measuring length for everyday tasks. This measurable increase in data quality contributes directly to fewer reworks and clearer quality documentation. Seamless data handling to speed throughput Integrated Wireless+USB connectivity and a Colour 1.5" touchscreen simplify digital measurement workflows: readings are displayed clearly on the touch interface and can be exported via wireless link or USB for immediate logging. This digital handover minimises transcription errors and accelerates batch reporting, making the caliper a pragmatic choice for process-controlled environments. The combination of touch input and reliable interfaces supports both manual inspection and automated data collection without complex setup. Durable design for regular shop use With an IP54 rating, the instrument tolerates dust ingress and splash exposure common in production settings, extending service life compared with unprotected devices. A jaw length of 43 mm provides stable contact area for reproducible measurements, helping to reduce operator-induced variation. The construction and protective rating are balanced to suit daily handling while ensuring consistent metrology performance over many cycles. Clear benefits for quality-focused teams The tool pairs precise measurement (0.005 mm resolution) with practical workshop features—robust ingress protection, straightforward data export and a readable colour display—so inspection teams gain both certainty and speed. Where traceable data capture is required, the caliper integrates into quality documentation without additional converters or complex adapters, supporting leaner inspection routines and more dependable process control. Choose the Microtech Metrology digital caliper for accurate medium-range measurement and straightforward data integration — contact Metav Werkzeuge in Emmerich for specification support or to discuss compatibility with existing data systems (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: 141430307 GTIN: 4061905037931 Brand: Microtech Metrology eClass: 21170344 Core specifications Measuring range: 30–330 mm Resolution: 0.005 mm Display: Colour 1.5" touchscreen Jaw length: 43 mm Protection class: IP54 Features Data output: Wireless + USB Digital instrument SKU: 141430307 FAQ What measurement range does the instrument cover? The caliper measures from 30 to 330 mm, placing it in the medium‑range class suited for general machine‑shop and fixture work. What resolution and accuracy can be expected? Resolution is 0.005 mm; this enables finer discrimination than many standard workshop calipers and supports tighter quality tolerances. How are readings exported for documentation? Readings can be transferred via the integrated Wireless + USB interfaces to inspection software or data loggers for traceable records. Is the device suitable for dirty or humid shop environments? Yes — the IP54 rating provides protection against dust and water splashes common in industrial settings. Which display does the caliper use for measurement readout? A colour 1.5" touchscreen presents measurements clearly and allows straightforward interaction for zeroing and mode selection. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3000mm Depth Caliper Colour Touchscreen Wireless USB IP54, ISO 17025 - Microtech Metrology
Take advantage of the combination of extra‑long reach, reliable digital data transfer and traceable calibration to standardise large‑component inspection. The included ISO 17025 calibration certificate and integrated Wireless+USB output ensure reproducible results and efficient data capture; order via Metav Werkzeuge or consult our specialists for application advice. Depth Caliper — extra‑long digital depth measuring instrument with 2.4" colour touchscreen (Microtech Metrology) The Depth Caliper is a purpose‑built digital depth measuring instrument for long‑range measurements up to 3,000 mm, designed for workshop and heavy‑duty machining environments. 2.4" colour touchscreen display Wireless and USB data output ISO 17025 calibrated with certificate Extra‑long 3,000 mm measuring range Measure large components with consistent repeatability With a measuring range of 3,000 mm, this instrument targets large assemblies where conventional calipers fall short. The extra‑long classification addresses measurements in pipe, vessel and heavy‑machining contexts where reach and profile stiffness are decisive for reproducible results. The device’s specified accuracy 0.09 mm and display resolution 0.01 mm give a clear technical basis for accept/reject decisions in production and incoming inspection. For quality managers this means predictable measurement uncertainty across extended lengths, while workshop teams benefit from a single tool that reduces the need for multiple gauges. Modern interface and seamless data capture for efficient workflows A bright 2.4" colour touchscreen presents readings clearly even under workshop lighting, while Wireless+USB connectivity removes manual transcription and accelerates data logging into SPC systems. Integration of digital transfer supports traceable quality records and lowers the risk of human error during shift changes or batch inspections. The caliper’s IP54 protection rating and hand‑finished measuring jaws ensure robust contact and resistance to dust and splashes, so the instrument remains dependable on the shop floor and in fixture setups. Traceable calibration and dependable construction for critical tasks Delivered with an ISO 17025 calibration certificate, the instrument provides documented traceability suitable for accredited quality processes and audit requirements. The manufacturer’s focus on precision manufacturing and finishing reduces setup variance and improves measurement reproducibility for serial inspection tasks. The combination of long reach, documented accuracy and solid workshop protection makes this digital depth gauge a pragmatic choice when long‑range measurement must be both accurate and auditable. Choose Microtech Metrology’s depth caliper for reliable long‑range measurement — contact Metav Werkzeuge in Emmerich for specification support, delivery options and application guidance: info@metav-werkzeuge.com / +49 2822 7131930. Technical Data Article number: 1432013007 GTIN: 4061905459726 Manufacturer: Microtech Metrology Facts Measuring range: 0–3000 mm Resolution: 0.01 mm Accuracy: 0.09 mm Display: Colour 2.4" touchscreen Protection class: IP54 Special features ISO 17025 calibration with certificate Data output: Wireless + USB Hand‑finished measuring jaws Digital depth caliper Extra‑long measurement classification FAQ Is a calibration certificate supplied with the instrument? Yes. The Depth Caliper from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability. What measuring tasks is this caliper suitable for? The instrument is intended for extra‑long measurements up to 3,000 mm, making it suitable for large components such as pipes, housings and heavy‑machined parts where extended reach and repeatability are required. How are measurements exported for quality documentation? Measurements are transmitted via the integrated Wireless and USB data output options; the Microtech Metrology depth caliper supports direct capture into measurement logging or SPC systems. What resolution and accuracy can be expected in use? The device provides a resolution of 0.01 mm and a stated accuracy of 0.09 mm, appropriate for long‑range workshop inspection where reach is prioritised alongside practical precision. Is the caliper protected against workshop conditions? Yes. The depth caliper features an IP54 protection rating and robust, hand‑finished measuring jaws to withstand typical dust and splash exposure on the shop floor. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3000mm Digitaler Messschieber, 0,01mm Auflösung, IP67, Wireless, ISO 17025 Kalibriert - Microtech Metrology
Der Microtech Messschieber kombiniert ISO 17025 Kalibrierung, eine extra‑lange Messreichweite bis 3.000 mm und Wireless Datenübertragung für effiziente Prüfabläufe; nutzen Sie diese Kombination aus Nachweisbarkeit, Reichweite und Integrationsfähigkeit für reproduzierbare Messungen und bestellen Sie das Messgerät direkt über Metav Werkzeuge oder fragen Sie unsere Beratung an. Messschieber von Microtech Metrology — Digitaler Präzisionsschieber für großformatige Messaufgaben Der Messschieber ist ein digitaler Messschieber mit robustem ABS‑Messsystem, IP67 Schutz und Wireless Datenausgang zur nahtlosen Einbindung in Prüfprozesse. Extra‑lange Messreichweite bis 3.000 mm ISO 17025 Kalibrierzertifikat inklusive Wireless Datenübertragung für digitale Prozesse Schutzklasse IP67 für staub- und wassergeschützten Einsatz Robustheit und Handhabung für großdimensionierte Bauteile Für Anwendungen an großformatigen Komponenten bietet dieses Messgerät eine extra‑lange Messreichweite und eine stabile Schenkelführung. Die ausgelegte Schenkelgeometrie reduziert Verwindung bei langen Messungen, sodass auch bei komplexen Aufbauten die Messwiederholbarkeit hoch bleibt. Dank der staub- und wassergeschützten Ausführung mit IP67 bleibt die Funktionalität auch in rauen Fertigungsumgebungen erhalten. Kalibrierung und Messsicherheit für dokumentierte Qualität Die Auslieferung inklusive ISO 17025 Kalibrierung und zugehörigem Kalibrierzeugnis schafft transparente Rückverfolgbarkeit und Prüfbarheit. Die Kombination aus dokumentierter Kalibrierung und digitaler Ablesung minimiert Unsicherheiten im Qualitätsprozess, weil Prüfwerte mit festem Referenzrahmen erfasst werden und Auditanforderungen erfüllt werden können. Digitale Integration und Effizienzgewinn im Messablauf Mit dem Wireless Datenausgang lassen sich Messwerte direkt in digitale Prüfprotokolle und Fertigungssteuerungen einspeisen. Die gut ablesbare Anzeige vom Typ Swiss electric Digit erleichtert die Datenerfassung am Messplatz und reduziert Übertragungsfehler. Dadurch sinkt der Zeitaufwand pro Messung und die Prozesskette gewinnt an Effizienz. Geeignete Einsatzbereiche und Anwendernutzen Dieses Messgerät richtet sich an Betriebe, die großformatige Bauteile prüfen müssen, etwa im Vorrichtungs-, Formen‑ oder Rohrbau. Die besondere Kombination aus Reichweite, Schutzart und Kalibrierfähigkeit macht das Gerät zur verlässlichen Wahl für Prüfpläne, in denen Nachweisbarkeit und Reproduzierbarkeit eine zentrale Rolle spielen. Empfehlen wir den Microtech Messschieber mit ISO 17025 Kalibrierung für alle Prüfaufgaben an großen Bauteilen — Anfragen bitte per eMail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 141073315 GTIN: 4061905454745 Marke: Microtech Metrology Bezeichnung: Messschieber Messsystem: ABS Digitalanzeige: Swiss electric Digit Höhe 14 mm Fakten Ablesung: 0,01 mm Genauigkeit: 0,1 mm Messbereich: 0–3000 mm Schnabellänge: 300 mm Querschnitt: 53x8 mm Besonderheiten Datenausgang: Wireless Schutzart: IP 67 — Staubdicht, zeitweiliges Untertauchen ISO 17025 Kalibrierung: Kalibrierzeugnis beigelegt Digitalanzeige: Swiss electric Digit Höhe 14 mm FAQ Wie genau sind die Messwerte des Geräts? Der Microtech Messschieber (Hersteller Microtech Metrology, SKU 141073315) liefert eine Ablesung von 0,01 mm bei einer angegebenen Genauigkeit von 0,1 mm, wodurch er für viele industrielle Prüfaufgaben geeignet ist. Eignet sich das Gerät für den Einsatz in rauer Fertigungsumgebung? Ja, durch die Schutzart IP67 ist das Gerät gegen Staub geschützt und kann kurzzeitig untergetaucht werden, was den Einsatz in wechselnden Produktionsumgebungen ermöglicht. Wird der Messschieber kalibriert ausgeliefert? Der Microtech Messschieber wird mit ISO 17025 Kalibrierung ausgeliefert; das Kalibrierzeugnis ist Bestandteil der Lieferung und unterstützt die Dokumentation im Prüfprozess. Wie werden Messdaten übertragen und weiterverarbeitet? Die Datenübertragung erfolgt über den Wireless Datenausgang; die gut ablesbare Swiss electric Digit Anzeige erleichtert die direkte Erfassung vor Ort und die digitale Weiterverarbeitung. Für welche Messaufgaben ist die Reichweite des Geräts ausgelegt? Mit einem Messbereich bis 3.000 mm eignet sich der Schieber besonders für großdimensionierte Bauteile, wie sie im Vorrichtungs‑, Formen‑ und Rohrbau vorkommen. Hersteller: Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
3000mm Langmessschieber, 0,01mm Auflösung, IP 67, ISO 17025 Kalibriert, ABS-System, Swiss Electric Display, Microtech Metrology
Die Kombination aus ISO 17025 Kalibrierung, IP 67 Schutz und einem 3.000 mm Messbereich bietet zuverlässige Präzision für großformatige Messaufgaben; bei Bedarf berät Metav Werkzeuge gern und liefert das Werkzeug direkt aus Emmerich. Messschieber von Microtech Metrology — Digitaler Messschieber 0–3.000 mm Messschieber für großformatige Werkstücke und industrielle Anwendungen mit digitaler Anzeige und robuster Ausführung Extra‑Lang: 3.000 mm Reichweite IP 67 Schutz gegen Staub und Spritzwasser ISO 17025 Kalibrierzertifikat inklusive Swiss electric Display 11 mm Ziffernhöhe ABS Messsystem für absolute Positionsreferenz Große Reichweite für großformatige Bauteile und stabile Handhabung Der Messschieber von Microtech Metrology ist auf lange Messstrecken ausgelegt und ermöglicht präzise Längenprüfungen an großformatigen Bauteilen. Durch den 3.000 mm Messbereich lassen sich Rohre, Gehäuse und lange Wellen direkt erfassen, ohne Teilmessungen zusammenzuführen. Die ausgelegte Balkensteifigkeit und der Querschnitt 53x8 mm sorgen für reproduzierbare Ergebnisse auch bei längeren Messungen. Vorteil: weniger Rüstzeit und schnellere Prüfabläufe. Verlässliche Messwerte dank Kalibrierung und Schutzart Dieses Messmittel wird mit einem ISO 17025 Kalibrierzertifikat ausgeliefert, sodass Messwerte sofort rückführbar und dokumentierbar sind. Die Schutzart IP 67 schützt die Elektronik gegen Staub und zeitweiliges Untertauchen, wodurch das Gerät in rauen Fertigungsumgebungen einsetzbar bleibt. Ergebnis: höhere Prozesssicherheit und weniger Ausfallzeiten durch Feuchtigkeit oder Schmutz. Bedienkomfort und digitale Ablesung für effizientere Prüfprozesse Die digitale Anzeige Swiss electric bietet eine Ziffernhöhe von 11 mm, was die Ablesbarkeit bei Produktionsbeleuchtung verbessert. Das ABS Messsystem garantiert eine feste Referenz, ohne bei jedem Einschalten eine Neuzurücksetzung durchführen zu müssen. Die Ablesung erfolgt in 0,01 mm, kombiniert mit einer angegebenen Genauigkeit von 0,1 mm, wodurch sich das Instrument für industrielle Standardprüfungen eignet. Zielgruppe und typische Einsatzfelder Das Werkzeug richtet sich an Fertigungsbetriebe, Vorrichtungsbau und Rohrverarbeiter, die große Bauteile messen müssen. Anwender profitieren besonders, wenn lange, gerade Messstrecken verlangt werden und eine dokumentierte Kalibrierung erforderlich ist. Durch die robuste Bauweise eignet sich das Gerät auch für Werkstätten mit wechselnden Umgebungsbedingungen. Empfehlung: Für präzise, großformatige Messaufgaben die Microtech Metrology Messschieber mit ISO 17025 Kalibrierzertifikat über Metav Werkzeuge anfragen — per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 141073305 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905454509 Messsystem: ABS Schnabellänge: 300 mm Querschnitt: 53x8 mm Daten Messbereich: 0–3.000 mm Messbereich Max mm: 3000 Genauigkeit: 0,1 mm Ablesung: 0,01 mm Digital Anzeige: Swiss electric Digit Höhe 11 mm IP Schutz: IP 67 Besonderheiten ISO 17025 Kalibrierung: Kalibrierzeugnis wird mitgeliefert IP 67: staubdicht, Schutz gegen zeitweiliges Untertauchen ABS: Absoluter Messwertspeicher für konstante Referenz Digital Anzeige: hohe Ziffernhöhe für bessere Ablesbarkeit FAQ Wird das Gerät kalibriert geliefert? Ja, der Microtech Metrology Messschieber wird vollständig kalibriert ausgeliefert; das ISO 17025 Kalibrierzeugnis gehört zum Lieferumfang und gewährleistet rückführbare Messwerte für die Fertigungskontrolle (Artikelnummer 141073305). Für welche Messlängen ist dieses Modell geeignet? Dieses Modell deckt mit einem Messbereich bis 3.000 mm großformatige Messaufgaben ab und ist damit für Rohr‑ und Behälterbau, Formenbau und lange Wellen geeignet; die Extra‑Lang Reichweite reduziert die Notwendigkeit von Mehrfachmessungen. Wie robust ist die Elektronik gegen Umwelteinflüsse? Der Microtech Metrology Messschieber verfügt über IP 67 Schutz, sodass Elektronik und Anzeige gegen eindringenden Staub und kurzes Untertauchen geschützt sind und das Gerät sich für anspruchsvolle Werkstattbedingungen eignet. Welche Anzeigeauflösung und Genauigkeit bietet das Gerät? Die Anzeige liefert eine Ablesung von 0,01 mm, während die technische Genauigkeit mit 0,1 mm angegeben ist; die Kombination eignet sich für Standardprüfungen in der industriellen Fertigung, wobei die klare Swiss electric Anzeige die Bedienung erleichtert. Wie lang ist der Messschnabel und welchen Einfluss hat das auf Messungen? Der Messschnabel hat eine Länge von 300 mm, wodurch Innen‑ und Außenmessungen an tiefen oder schwer zugänglichen Bereichen möglich werden; längere Schnäbel verbessern die Reichweite ohne zusätzliche Vorrichtungen. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
300mm Caliper Jaw Adapter For 4mm Max Jaw Thickness, Attachment For Caliper Measuring Tips - Metav IndustryLine
Take advantage of the combination of compatibility with standard calipers (0–300 mm), a maximum jaw thickness allowance of 4 mm, and a lightweight, easy-to-fit design to keep measurement tasks efficient and repeatable on the shop floor. Order the accessory directly via Metav Werkzeuge or consult the team for application advice. Measuring Adapter for Calipers M240.311 — fits 0–300 mm calipers, 4 mm max jaw thickness (Metav IndustryLine) Measuring Adapter for Calipers M240.311 is an attachment that extends the functionality of standard calipers, enabling secure use where jaw thickness or geometry would otherwise limit access Compatible with 0–300 mm calipers Accepts up to 4 mm jaw thickness Lightweight accessory — 0.05 kg Simple attachment for measuring jaws Extend caliper capability while preserving measurement quality The adapter transforms a standard caliper into a more versatile gauging tool without altering the instrument’s core accuracy. Designed for the Standard (0–300 mm) caliper class, the accessory accepts jaws up to 4 mm thick and is intended for direct, repeatable mounting on common analogue calipers. As a result, workshops gain access to otherwise awkward measuring points without the need for specialised instruments, improving throughput and reducing setup time. The compact mass of 0.05 kg minimises added inertia, so handling remains nimble and stable during routine inspection work. Quick fit and reliable handling for everyday workflows Installation emphasises speed and repeatability: the attachment clamps to the caliper measuring jaws and stays secure during typical measuring sequences. Being an analogue accessory it integrates seamlessly with mechanical verniers and digital calipers of compatible jaw thickness, preserving the original measuring functions and ergonomics. The straightforward design reduces training time for operators and supports faster measurement cycles, delivering a clear efficiency gain in production and quality control tasks. The robust fitting prevents slippage, enhancing confidence in measured values under normal workshop conditions. Practical choice for workshops and metrology suppliers As a small but effective accessory from Metav IndustryLine, the M240.311 suits both craft and light industrial environments where adaptability matters. It bridges the gap between specialist gauges and everyday calipers, enabling teams to meet measurement challenges without overcomplicating tool inventories. The accessory complements existing metrology equipment by expanding application range while keeping procurement and storage simple — an economical way to increase capability at the bench or in a service van. For straightforward integration into inspection routines or for advice on compatibility with a specific caliper model, contact Metav Werkzeuge to request the M240.311 measuring adapter or to discuss application specifics — call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: M240.311 GTIN: 4054469159508 Manufacturer: Metav IndustryLine Core data Suitable for calipers: 0–300 mm Max jaw thickness: 4 mm Weight: 0.05 kg Customs tariff number: 90178090 Special features Attachment for caliper measuring jaws Compatible with common standard calipers Class: Standard (0–300 mm) Analogue accessory FAQ Can this adapter be used on any caliper model? The adapter is compatible with calipers that have a measuring range up to 0–300 mm and jaws no thicker than 4 mm; check jaw geometry against the M240.311 dimensions for secure fit. Will the adapter affect the caliper’s accuracy? The accessory does not change the caliper’s internal measuring mechanism; measurement accuracy remains governed by the caliper itself, while the adapter provides improved access and handling for specific workpieces. Is the material specified for the adapter? The product specification does not list a base material; refer to the technical data or contact Metav Werkzeuge for detailed construction information if material composition is required for a particular application. What types of measurements can be carried out with the adapter fitted? All standard caliper functions remain available; the adapter facilitates improved engagement of the jaws for external or step measurements where jaw thickness or shape would otherwise obstruct access. Is this accessory suitable for regular workshop use? Yes — the adapter is designed for routine use in workshops and small production environments where extending caliper capability is preferable to introducing additional specialised gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Depth Caliper Digital Touchscreen Wireless USB IP54, ISO 17025 Calibrated - Microtech Metrology
Combining ISO 17025 calibration, reliable ±0.025 mm accuracy and wireless data transfer delivers traceable, shop-ready results and faster documentation. Order the calibrated depth caliper directly via Metav Werkzeuge or request advice from our consultants. Depth Caliper (Digital) by Microtech Metrology — 1.54" colour touchscreen, Wireless + USB The Depth Caliper is a digital depth gauge designed for standard machine‑shop and workshop measurements up to 300 mm, offering a compact, robust tool for quality control and production tasks. Factory ISO 17025 calibration with certificate 0–300 mm standard measuring range Colour 1.54" touchscreen display Wireless + USB data output Traceable accuracy for production control The instrument is delivered fully calibrated to ISO 17025, which guarantees measurement traceability and acceptance in regulated workflows. With an indicated accuracy of ±0.025 mm and a reading step of 0.005 mm, the device supports reliable pass/fail decisions and reduces rework caused by uncertain measurements. This level of performance positions the caliper as a dependable tool for statistical process control and routine inspection where documented measurement uncertainty is required. Faster documentation and fewer transcription errors Equipped with Wireless + USB data output and a 1.54" colour touchscreen, the gauge streamlines data capture and transfer into measurement systems or SPC software. The responsive digital display shortens cycle time for repetitive depth checks, while direct export avoids manual entry errors that slow production. The combination of touchscreen controls and digital connectivity increases throughput and simplifies traceability in batch production environments. Robust design for everyday workshop use Built with handmade measuring jaws and an IP54 protection rating, the caliper withstands typical workshop conditions while preserving measuring faces from abrasion. Classified in the Standard range (0–300 mm), it balances reach and rigidity—suitable for metalworking and general mechanical tasks where one‑hand operation and repeatability matter. The depth gauge design delivers clear contact geometry for slot, bore and recess measurements, making it a versatile addition to a quality‑focused toolbox. For calibrated precision and integration support from Microtech Metrology, contact Metav Werkzeuge in Emmerich for tailored advice and delivery options Technical Data SKU: 1432010307 GTIN: 4061905039072 Manufacturer: Microtech Metrology Category: Digital caliper (depth gauge) Facts Measurement range: 0–300 mm Accuracy: ±0.025 mm Resolution / reading step: 0.005 mm Display: Colour 1.54" touchscreen Protection class: IP54 Data output: Wireless + USB Calibration: ISO 17025 certificate included Special features Handmade measuring jaws Digital depth measurement instrument Colour touchscreen interface Wireless data transfer and USB connectivity Standard‑range caliper for workshop and machine‑shop use FAQ Is the depth caliper supplied with a calibration certificate? Yes. The Microtech Metrology depth caliper (SKU 1432010307) is delivered fully calibrated to ISO 17025 and includes the calibration certificate. What measurement range does the instrument cover and where is it best applied? The instrument covers 0–300 mm and is classified as a Standard‑range caliper, making it ideal for machine‑shop and general workshop measurements such as recess, bore and slot depths. What accuracy and resolution can be expected from the device? The depth caliper achieves ±0.025 mm accuracy with a 0.005 mm reading step, suitable for shop‑floor quality control and production documentation. How can measurement data be exported from the caliper? Data can be exported via Wireless connection or USB; the colour touchscreen facilitates quick configuration and transfer to PCs or data‑logging systems for SPC workflows. Is the instrument suitable for use in dusty or humid workshop environments? The caliper has an IP54 rating, offering protection against dust ingress and splashes—appropriate for standard workshop conditions but not for immersion. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Caliper E‑Ink Display, IP54, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of ISO 17025 calibration, a high‑contrast E‑Ink readout and a 0–300 mm measuring range ensures reliable depth checks with traceable documentation; order the calibrated depth caliper directly via Metav Werkzeuge or consult our specialists for application advice. Depth caliper — digital with E‑Ink display (Microtech Metrology) The depth caliper is a precision instrument for depth measurement in workshop and quality‑control environments, combining a low‑power E‑Ink display with industrial protection for consistent readings up to 300 mm. E‑Ink display for stable readings Calibrated to ISO 17025, certificate included Measuring range 0–300 mm for standard tasks IP54 dust and splash protection Hand‑finished measuring jaws for durability Precision that fits the workshop workflow The instrument is built for the pragmatic demands of machine shops and inspection benches: a measuring range of 0–300 mm places it in the standard class for everyday mechanical and metalworking tasks, offering a practical balance between reach and rigidity. With a stated accuracy of ±0.025 mm and a display resolution of 0.005 mm, the device supports repeatable depth checks on bores, slots and stepped components, reducing rework and accelerating quality decisions. The result is measurable time savings where throughput and traceability are required. Stable readings and robust handling for reliable output A low‑energy E‑Ink readout provides excellent legibility in varied lighting and reduces display drift during long inspection runs, while the IP54 protection class guards against dust ingress and splashes in busy workshop environments. The measuring faces are hand‑finished, improving contact behaviour and extending service life under frequent use. Together these features mean fewer interrupted measurements and more dependable results during production runs or incoming inspection. Traceable calibration and audit readiness This tool is supplied fully calibrated to ISO 17025, with a calibration certificate included, so documentation for internal audits and customer inspections is ready on delivery. Traceable calibration shortens qualification steps for incoming instruments and supports quality management systems with an auditable measurement chain. For operations that prioritise documented accuracy, the delivered certificate removes a procedural hurdle and speeds instrument deployment. Contact Metav Werkzeuge for tailored advice on integrating this Microtech Metrology depth caliper into inspection routines and to receive the ISO 17025 calibration certificate with your order. Technical Data Article number: 1432010308 GTIN: 4061905455803 Manufacturer: Microtech Metrology Display type: E‑Ink Facts Measuring range: 0–300 mm Readout resolution: 0.005 mm Accuracy: ±0.025 mm Protection class: IP54 Special features Digital depth caliper Hand‑finished measuring jaws ISO 17025 calibration with certificate included Category: Digital calipers (Messschieber Digital) FAQ What measurements is this tool intended for? The depth caliper measures depths of bores, slots and stepped features; the Microtech Metrology depth caliper (SKU 1432010308) is optimised for depth measurement tasks up to 300 mm. Is the device delivered calibrated? Yes — the instrument is delivered calibrated to ISO 17025 and includes a calibration certificate for traceability and audit purposes. What accuracy and resolution can be expected? The depth gauge offers an accuracy of ±0.025 mm with a display resolution of 0.005 mm, providing a high level of repeatability for standard workshop and inspection use. How does the E‑Ink display benefit daily use? The E‑Ink readout on this caliper gives clear, stable readings with low power consumption, improving legibility under different lighting conditions and during extended measurement sessions. Is the instrument suitable for harsh shop environments? With an IP54 rating and hand‑finished measuring faces, the depth caliper withstands dust and splashes typical in production environments while maintaining contact quality. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Caliper Interchangeable Probes mm/inch ABS/INC Display IP Not Specified - Filetta
Precision, flexibility and a clear digital readout combine to support consistent depth measurement in workshop and inspection tasks — ±0.03 mm accuracy, interchangeable probes and a mm/inch digital display ensure dependable results. Order the MS910.497 depth caliper directly via Metav Werkzeuge or contact our consultants for application guidance. MS910.497 Depth Caliper by Filetta — digital depth measuring instrument with interchangeable probe set The MS910.497 Depth Caliper is a digital depth-measuring instrument designed for workshop and inspection environments, offering a versatile probe system and a measuring range suitable for standard machining and assembly tasks up to 300 mm. Digital display with mm/inch readout Interchangeable probes incl. disc and pin Measurement range 0–300 mm for standard use Supplied in protective transport case Engineered for standard workshop precision and repeatability This instrument is classified for the standard measuring range (up to 0–300 mm), delivering the balance of reach and stiffness typically required in general machine and metalworking shops. With a display resolution of 0.01 mm and an stated accuracy of ±0.03 mm, the device provides reliable, quantifiable results for repetitive tasks such as depth checks on housings, bore steps and assembled components. These measurable specifications support traceable inspection routines and reduce uncertainty in dimensional control, which is especially valuable where reproducibility across shifts or operators is required. Versatile probe system adapts to varied depth tasks A set of interchangeable probes expands measurement capability beyond a single contact geometry: the package includes a hook and a double hook for edge engagement, a disc probe Ø30 mm for broad-surface contact and a measuring pin Ø3 mm for narrow bores or recesses. This modular approach minimises the need for separate instruments and accelerates changeover between measurement tasks. The ability to select the most suitable probe improves contact stability and thus measurement consistency when dealing with different component shapes and surface conditions. Clear digital operation and robust handling features The caliper’s digital display supports mm/inch switching and features ABS/INC and Reset/Preset functions for flexible zeroing and comparative measurement workflows. Operation is powered by a V357 battery, providing simple, serviceable power replenishment. A dedicated lock screw secures the sliding carriage to maintain a set reading during transport or when transferring measurements, reducing human error. These elements together streamline inspection steps and speed up routine measurements with a focus on operator efficiency. Protected supply and seamless workshop integration Supplied in a protective transport case, the instrument is ready for safe storage and mobile use across workstations. The compact handling characteristics and included probe set make the tool suitable as a single-item solution for depth measurement needs in inspection benches and on the shop floor. As a special-depth caliper designed for practical use, the MS910.497 integrates into existing measuring procedures and complements standard caliper fleets, offering tangible improvements in versatility without adding complexity. Contact Metav Werkzeuge for a specification review of the Filetta MS910.497 depth caliper and arrange delivery from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice. Technical data Article number: MS910.497 Manufacturer: Filetta Category: Special depth caliper Digital: Yes Display functions: mm/inch, Ein/Aus, ABS/INC, Reset/Preset Facts Measuring range: 0–300 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Battery: 1x V357 Special features Interchangeable probes: hook, double hook, disc probe Ø30 mm, measuring pin Ø3 mm Lock screw for carriage fixation Supplied in protective transport case Suitable for workshop and inspection use FAQ Is the caliper suitable for general machine‑shop depth checks? The Filetta MS910.497 is designed for standard workshop use with a 0–300 mm range and an accuracy of ±0.03 mm, making it well suited to typical machine‑shop depth measurements. Can measurements be taken in inches as well as millimetres? Yes — the digital display supports switching between mm/inch, and includes ABS/INC and reset/preset functions for workflow flexibility. Which probes are included and are they interchangeable? The delivery includes a hook, a double hook, a disc probe Ø30 mm and a measuring pin Ø3 mm; all probes are interchangeable to match different contact geometries. Is a carrying case provided with the instrument? Yes — the caliper is supplied in a protective transport case to safeguard the instrument and accessories during storage and transit. What powers the digital electronics and how is it replaced? The device uses a V357 battery, which is readily replaceable to ensure uninterrupted operation. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
300mm Depth Caliper Nail Tip, Color 1.54" Touchscreen, Wireless/USB, IP54 - Microtech Metrology
Combine precise 0.025 mm accuracy with a 1.54" colour touchscreen and reliable Wireless + USB data transfer for efficient, repeatable depth measurement; order directly via Metav Werkzeuge or ask our consultants for application advice. Depth Caliper — Colour touchscreen and Wireless + USB connectivity (Microtech Metrology) The Depth Caliper is a digital depth gauge designed for workshop and inspection tasks, offering a robust measuring range suited to general machine‑shop requirements up to 300 mm. 1.54" colour touchscreen display Wireless and USB data output IP54 splash‑resistant protection Precision 0.025 mm for depth readings Accurate depth measurement for routine quality control The instrument delivers reliable depth readings across a measuring range of 0–300 mm, placing it in the Standard category for calipers — a practical compromise between reach and stiffness for general machining work. With a stated accuracy of ±0.025 mm (25 µm), this digital device is suitable for everyday dimensional checks where repeatability and clear numeric readout speed up inspection routines. The caliper’s measured tolerance offers a predictable basis for process control and reduces the need for repeated manual interpretation of scale marks. Time‑saving connectivity and an intuitive display Equipped with a 1.54" colour touchscreen, the instrument combines an easily legible display with touch operation that simplifies zeroing and unit selection. Measurement values can be exported via Wireless + USB, allowing integration into data collection workflows and reducing transcription errors during quality documentation. Wireless transfer supports quick logging where cable routing is impractical, while the USB interface enables direct connection to PCs or data loggers for batch processing of measurement series. Built to withstand workshop conditions and everyday handling With an IP54 rating the depth gauge resists dust ingress and splashing, making it robust enough for production environments without requiring special housing. The device’s mechanical design focuses on stable depth probing and consistent contact geometry, which helps preserve measurement integrity over repeated use. For teams that rely on fast, dependable checks during assembly or setup, the combination of a compact digital interface and protective sealing enhances uptime and lowers the risk of damage-related downtime. Contact Metav Werkzeuge for tailored guidance on Microtech Metrology depth calipers and to arrange prompt supply from our Emmerich facility. Technical data Article number: 1432030307 GTIN: 4061905452642 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Accuracy: ±0.025 mm (25 µm) Display: Colour 1.54" touchscreen Special features Wireless + USB data output IP54 splash‑resistant protection Digital depth gauge format Classified as Standard (measuring range up to 300 mm) FAQ What measuring range does this instrument cover? The Microtech Metrology depth caliper covers a measuring range of 0–300 mm and is classified in the Standard range for calipers, making it suitable for most machine‑shop and inspection tasks. How precise are the depth readings? Depth readings are specified with an accuracy of ±0.025 mm (25 µm), providing repeatable measurements for routine quality control work with the Microtech Metrology depth caliper (SKU 1432030307). How can measurement data be exported? Measurement values can be transferred using the caliper’s Wireless capability or via USB, enabling integration into digital reporting systems and reducing manual data entry. Is the device suitable for workshop use? Yes; the instrument is rated IP54, which protects against dust ingress and splashes, making it well suited to the conditions found in industrial workshops and production areas. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Caliper Swiss Digit Display IP67, 0.01mm Resolution, Calibrated Certificate - Microtech Metrology
Take advantage of the combination of robust environmental protection, clear Swiss Digit readability and workshop-grade measurement accuracy for reliable depth checks across production and inspection tasks. Order the instrument directly via Metav Werkzeuge or consult their specialists for application advice. Digital Depth Caliper — Microtech Metrology; IP67, 0–300 mm The Digital Depth Caliper is a precision depth-measuring instrument for workshop and quality‑control applications, designed to deliver repeatable measurements on machine parts and assemblies. IP67 protection for harsh environments Swiss Digit 11 mm high-contrast display 0–300 mm range with 0.01 mm readout Precise depth readings that support production decisions The caliper offers a 0–300 mm measuring span with a reading resolution of 0.01 mm and an accuracy of ±0.03 mm, enabling confident decisions during incoming inspection and in-process checks. The fine resolution reduces interpretation errors compared with coarser instruments, while the documented accuracy helps classify tolerances and reduce scrap rates. This makes the tool particularly suitable for routine dimensional control where small deviations affect assembly fit or function. Robust construction for demanding workshop environments With IP67 protection, the instrument resists dust ingress and brief immersion, so measurement capability is maintained at the machine bench even where coolant mist or metal swarf is present. The Swiss Digit display, with an 11 mm character height, ensures readings remain legible under varied lighting and angles, cutting measurement time and reducing transcription mistakes. The sealed electronics and rugged slider design translate into fewer service interruptions and longer periods between maintenance. Streamlined inspection workflow and practical benefits Classified within the Standard range (100–300 mm) of calipers, the instrument balances reach and stiffness for typical machine‑shop work. The clear digital readout speeds checks compared with non-digital alternatives and simplifies documentation of results. For shops introducing digital measurement into routine quality control, the instrument provides an immediate uplift in process reliability without the complexity of larger metrology systems. For dependable depth measurement in production and inspection, choose the Microtech Metrology digital depth caliper and contact Metav Werkzeuge in Emmerich for tailored advice, delivery details or to discuss suitability for specific applications. Technical data SKU: 1432030303 GTIN: 4061905459801 Manufacturer: Microtech Metrology Category: Digital depth caliper Display: Swiss Digit, 11 mm character height Protection class: IP 67 Facts Measuring range: 0–300 mm Resolution (reading): 0.01 mm Accuracy: ±0.03 mm Digital: yes Special features Standard range classification: Standard (100–300 mm) Robust slider and sealed electronics Suitable for workshop and quality‑control use FAQ What measurement range does the caliper cover? The Microtech Metrology digital depth caliper covers a measuring range of 0–300 mm (SKU 1432030303), suitable for most general workshop and machine‑shop depth checks. What resolution and accuracy can be expected? The instrument provides a resolution of 0.01 mm and an accuracy of ±0.03 mm, making it suitable for standard dimensional control tasks in production and inspection. Is the device resistant to coolant and dust? Yes. The caliper is rated IP67, offering dust-tight construction and protection against temporary immersion, so it performs reliably at the machine bench. How readable is the display under workshop lighting? The caliper is fitted with a Swiss Digit display featuring 11 mm-high characters for high‑contrast legibility, reducing read errors and speeding measurements. Is this caliper suitable for routine quality control in a small shop? Absolutely. The balance of 0–300 mm reach, fine 0.01 mm resolution and robust protection suits small to medium workshops seeking reliable, fast depth measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Digital Caliper Double Hook, 0.001mm Resolution, IP54, USB Output - Microtech Metrology
Combining USB data output, IP54 protection and ±0.03 mm repeatability, this digital depth instrument delivers reproducible depth measurement across the standard 0–300 mm workshop range. Order the digital depth caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital Depth Caliper — Microtech Metrology, USB, 0–300 mm The Digital Depth Caliper is a precision depth gauge for inspection and workshop measurement, designed for standard 0–300 mm tasks with a clear digital readout. USB data output for traceable logging IP54 protection for workshop environments 0–300 mm range for standard workshop tasks ±0.03 mm accuracy for reliable control Precise, repeatable depth measurement that fits the workshop The depth gauge is configured for standard workshop applications with a 0–300 mm measuring range, placing it squarely in the universal workshop class where reach and stiffness are balanced for everyday use. With a display resolution of 0.001 mm and an indicated accuracy of ±0.03 mm, the instrument supports reliable decision-making in quality control and routine inspections. The high-resolution readout reduces interpolation errors common to analog instruments and ensures that recorded values remain comparable across shifts and operators. Traceable data capture to speed up quality routines Equipped with USB output, the caliper removes manual transcription and simplifies data logging for inspection protocols. The 13 mm display offers high legibility to speed readings and reduce operator error during repetitive tasks. Exported files can be integrated into common quality-management software or spreadsheets, supporting statistical process control and audit documentation. This capability enhances throughput by shortening inspection cycles and by providing a direct data path from measurement to documentation. Built for workshop conditions with clear handling benefits The instrument’s IP54 rating gives reliable protection against dust ingress and splashing liquids, making it suitable for production-floor environments. The digital readout and compact depth beam allow straightforward positioning in confined spaces where visual access is limited. The overall design prioritises fast, repeatable operation so that the focus remains on measurement quality rather than instrument handling. For buyers seeking dependable, documented depth measurement, this digital device from Microtech Metrology combines workshop toughness with the data features needed for modern quality workflows. Choose Microtech Metrology’s digital depth caliper for reliable, logged depth measurement — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for specialist purchasing advice and rapid supply. Technical Data Article number: 1432020302 GTIN: 4061905456275 Brand: Microtech Metrology Digital: yes Data output: USB Protection class: IP 54 Display height: 13 mm Facts Measuring range: 0–300 mm Resolution: 0.001 mm Accuracy: ±0.03 mm Display height: 13 mm Special features Digital depth caliper design USB data output for traceable logs IP54 splash and dust resistance FAQ How accurate is the depth measurement? The digital depth caliper achieves an indicated accuracy of ±0.03 mm with a resolution of 0.001 mm, making it suitable for routine inspection and workshop control. Which measurement tasks is this instrument intended for? This depth gauge is designed primarily for depth and step measurements within the standard workshop range of 0–300 mm. Can measurement values be exported for documentation? Yes, measurements can be exported via the USB data output for integration into inspection records and quality-management systems. Is the instrument suitable for use on the shop floor? With an IP54 protection rating, the caliper is resistant to dust and splashes and is therefore suited to industrial workshop environments. What is the product reference for ordering or spare parts? The product is listed under article number 1432020302 and is supplied by Microtech Metrology. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Digital Caliper Double Hook, Swiss Digit Display 11mm, IP67 - Microtech Metrology
Take advantage of robust IP67 protection, a high-contrast Swiss Digit display and a fine 0.001 mm reading to secure reproducible depth measurements across the workshop; order the depth caliper directly via Metav Werkzeuge or contact our consultants for application-specific advice. Depth Caliper — Digital depth caliper with Swiss Digit display and IP67 protection (Microtech Metrology) Depth Caliper for fast, reliable depth measurement in machine shops and inspection bays with a clear Swiss Digit display and durable enclosure Swiss Digit 11 mm display IP67 dust and water protection Precise 0–300 mm measuring range Resolution 0.001 mm reading High-resolution measurement for demanding shop-floor tasks The instrument delivers a 0.001 mm reading, making it suitable where fine depth distinctions matter. With a measuring span of 0–300 mm, the tool fits the standard caliper class used across general engineering and metalworking. The combination of a fine digital readout and a robust construction reduces repeat-measurement scatter, supporting faster decision-making on the production line. The clear Swiss Digit display (11 mm high digits) speeds reading and reduces transcription errors during inspection rounds, while the stable digital electronics allow quick capture of values for process control. Durable design that withstands industrial environments Engineered for frequent use, the caliper is rated IP67, which protects internal electronics against dust ingress and short-term immersion. This level of protection extends service intervals and minimises downtime caused by contaminants or coolant mist common in machining cells. The sealed digital unit and rugged slider ensure consistent performance in mixed environments, from bench inspection to on‑machine checks, and support long-term reliability under routine shop stresses. Practical handling and integration for everyday use Ergonomic balance and a concise display layout allow rapid depth measurements on workpieces, gauges and toolsetups. As a dedicated depth instrument, it simplifies tasks that otherwise require improvised fixtures or repeated manual checks. The device suits maintenance, quality control and in-process verification tasks where traceable, repeatable depth data are required. For procurement and inventory planning, listing the product as a digital depth caliper ensures compatibility with workshop tooling lists and inspection procedures. For tailored advice and reliable supply of this Microtech Metrology depth caliper (SKU 1432020303), contact Metav Werkzeuge in Emmerich for local stock information and technical guidance. Technical data Article number: 1432020303 GTIN: 4061905456299 Manufacturer: Microtech Metrology Category: Digital caliper IP protection: IP67 Display: Swiss Digit, 11 mm Digital: yes Facts Measuring range: 0–300 mm Resolution / reading: 0.001 mm Display height: 11 mm eClass: 21170344 Special features Swiss Digit display IP67 dust and water protection Digital depth caliper for workshop use Standard range classification: Standard (max 100–300 mm) FAQ What measuring range does the depth caliper cover? The Microtech Metrology depth caliper covers a 0–300 mm measuring range (SKU 1432020303), matching standard workshop requirements for components and fixtures. What is the smallest increment readable on the display? The instrument provides a 0.001 mm reading resolution via the Swiss Digit display, enabling fine depth discrimination for inspection tasks. Is the caliper suitable for damp or dusty environments? Yes — the caliper is rated IP67, which protects against dust ingress and temporary immersion, making it suitable for many shop-floor conditions. Which display does the device use and how readable is it? The unit features a Swiss Digit display with 11 mm high digits for improved legibility during fast inspection cycles. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Digital Caliper With Double Hook, Swiss Digit Display 11mm, IP67 Wireless - Microtech Metrology
Combine high-resolution measurement (0.001 mm) with wireless data transfer and IP67 protection to keep inspection workflows efficient and reliable. Order the depth caliper directly via Metav Werkzeuge or contact our consultants for tailored advice. Depth Caliper — Digital, Wireless Output, IP67 (Microtech Metrology) The Depth Caliper is a digital depth-measuring instrument for workshop and inspection use, offering a 0–300 mm measuring range and robust wireless data output. Digital display Swiss Digit 11 mm Wireless data transfer for traceability IP67 protection for wet environments Range 0–300 mm for standard workshop tasks Faster inspections with laboratory-grade resolution This depth-measuring instrument combines a 0–300 mm measuring range with a fine 0.001 mm resolution to accelerate routine checks while keeping measurement uncertainty low. The exceptionally small display increment makes subtle deviations visible at a glance, reducing rework and inspection time. With wireless data output, measured values are transferred without manual transcription, which reduces human error and speeds up documentation for production control or quality records. Built to withstand workshop conditions Designed for standard workshop applications, the caliper sits in the Standard class (measuring range up to 300 mm), which balances reach and rigidity for everyday machine‑shop tasks. The IP67 rating means the sliding sections and electronics are protected against dust ingress and short immersion in water, so the instrument tolerates coolant splashes and cleaning routines. This durability preserves measurement stability and lowers the frequency of unplanned replacements in harsh environments. Clear readout and straightforward data handling The unit features a Swiss Digit display with an 11 mm digit height for rapid legibility in dimly lit benches and on busy production floors. Combined with the wireless interface, the caliper supports digital workflows by enabling direct transfer to inspection software or data loggers, cutting administrative steps between measurement and evaluation. The intuitive digital readout simplifies training for operators while maintaining traceable measurement chains. Practical confidence from a reputable maker and supplier Manufactured by Microtech Metrology, the instrument matches industry expectations for repeatability and component quality, making it suitable for assembly shops, toolrooms and quality departments. Supplied through Metav’s European distribution, customers benefit from a reliable stock and a clear procurement channel that supports consistent quality across workshops and smaller industrial operations. Contact Metav Werkzeuge today for technical advice and secure this Microtech depth caliper with wireless output and IP67 protection for your inspection setup Technical Data Article number: 1432020304 GTIN: 4061905456312 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Resolution: 0.001 mm Display height: 11 mm Protection class: IP 67 Special features Digital display: Swiss Digit Data output: Wireless Category: Digital depth caliper Application: Depth measurement for workshop and inspection FAQ What measuring range does the depth caliper cover? The depth caliper has a measuring range of 0–300 mm, making it a Standard‑class caliper suitable for general workshop and machine‑shop tasks. What resolution and accuracy can be expected from this digital caliper? The instrument provides a resolution of 0.001 mm, allowing for fine detection of dimensional deviations during inspection routines. How is measurement data transferred from the caliper? Measurement values are transmitted via the device’s wireless data output for direct integration into inspection software or data collection systems. Is the caliper suitable for use in damp or coolant-prone environments? Yes, the caliper is rated IP67, which protects against dust ingress and temporary immersion, making it robust for shop‑floor conditions. Who manufactures the caliper and where does it ship from? The caliper is manufactured by Microtech Metrology and is supplied via Metav Werkzeuge to ensure consistent availability and distribution across Europe. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Gauge Caliper Digital Color Touchscreen Wireless USB IP54 - Microtech Metrology
Take advantage of the combination of precise measurement capability, flexible data transfer and robust protection for reliable workshop results; order the instrument directly via Metav Werkzeuge or ask the Metav consultants for additional technical advice. Depth Caliper — Digital depth caliper, 0–300 mm, 1.54" colour touchscreen (Microtech Metrology) Depth Caliper — a digital depth-measuring caliper designed for standard workshop and quality-control applications, offering reliable data transfer and robust IP54 protection for intermittent dusty or damp environments. Digital depth caliper, 0–300 mm range 1.54" colour touchscreen display Wireless and USB data output IP54 protection for workshop use Precision and dependable measurement for routine inspection The Depth Caliper combines a clear 1.54" colour touchscreen with a finely tuned measurement system to deliver repeatable depth readings across the 0–300 mm span. With a stated accuracy of 0.025 mm and a reading increment of 0.005 mm, the instrument suits standard machine‑shop tolerances and component inspection tasks. The digital display simplifies reading and reduces interpretation errors compared with analogue scales, while the device’s digital interface supports efficient downstream documentation. Efficient data capture and process integration Equipped with Wireless + USB data output, the caliper supports fast transfer of measured values into inspection protocols and spreadsheets, reducing manual entry and associated errors. The combination of onboard display and external data channels enables both standalone checks and integration into digital quality workflows; this makes the instrument suitable for workshop benches and small-series production lines where traceable data capture speeds up throughput and auditability. Durable design for everyday workshop conditions Built to IP54 standards, the measuring device resists dust ingress and water splashes commonly encountered on the shop floor, extending service life and ensuring consistent operation. The construction balances handling convenience with the rigidity required for depth measurement in the standard range (0–300 mm), offering a dependable tool for general metalworking, assembly jigs and fixture checks. The manufacturer’s reputation further supports sustained use in industrial settings. For tailored advice on integrating this Microtech Metrology depth caliper into existing inspection routines, contact Metav Werkzeuge—local expertise and workshop-proven parts supply from Emmerich are available to assist with specifications and procurement. Technical Data Article number: 1432020307 GTIN: 4061905456329 Manufacturer: Microtech Metrology Facts Measurement range: 0–300 mm Reading increment: 0.005 mm Accuracy: 0.025 mm Display: Colour 1.54" touchscreen Data output: Wireless + USB Protection class: IP54 Digital instrument: yes Special features Standard workshop class caliper (0–300 mm) Colour touchscreen interface Wireless data transmission option USB data connection FAQ What measurement range does the caliper cover? The caliper offers a measurement range of 0–300 mm, classifying it in the standard workshop category suitable for routine machine‑shop and assembly measurements. What accuracy and resolution can be expected from this instrument? The instrument provides an accuracy of 0.025 mm with a reading increment of 0.005 mm, which meets typical quality‑control needs for standard components. How can measurement values be exported? Measurement values can be transferred via Wireless connection or USB, allowing quick documentation and integration into inspection records. Is the instrument protected against dust and coolant splashes? Yes; the caliper is rated IP54, offering resistance to dust ingress and water splashes common in workshop environments. Who manufactures this caliper and where can further product details be obtained? The caliper is produced by Microtech Metrology; further technical details can be provided by Metav Werkzeuge for application advice and procurement. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Gauge Caliper Digital Wireless Swiss Digit Display IP67 - Microtech Metrology
A robust, workshop-ready solution that pairs IP67 protection with wireless data transfer and a clear Swiss Digit display for dependable depth measurement; benefit from reliable readings and seamless digital capture. Order the depth caliper directly via Metav Werkzeuge or ask our consultants if needed. Depth caliper — wireless digital instrument, IP67 protection (Microtech Metrology) The Depth caliper is a wireless digital measuring instrument for reliable depth measurements in machine shops and production environments up to 300 mm. Wireless data output for traceable measurements IP67 protection against dust and water ingress Swiss Digit display 11 mm for clear readings Accuracy ±0.03 mm, resolution 0.01 mm Precise measurements that reduce rework and downtime The instrument delivers a measuring range of 0–300 mm, placing it in the Standard class for workshop and machine‑shop use where reach and stiffness must be balanced. With a display resolution of 0.01 mm and an stated accuracy of ±0.03 mm, the device supports routine quality checks and dimensional control across common production tasks. The Swiss Digit display (11 mm digit height) improves read‑off speed and reduces interpretation errors; this combination of resolution, accuracy and legibility helps to avoid rework and maintain throughput in repetitive measurement cycles. Built to withstand shop conditions while simplifying data capture Designed for industrial conditions, the instrument carries an IP67 rating, which protects against dust ingress and temporary immersion in water — a practical advantage on busy shop floors. The Wireless data output enables direct capture of measurement values into data logging or SPC systems, reducing manual transcription and the associated risk of errors. These features support faster inspection routines and seamless integration into digital quality processes, contributing to consistent documentation and traceability of measurement results. Integration into daily workflows and the Metav advantage As a compact digital depth gauge, the tool is well suited to repetitive depth checks and fixture verifications in toolrooms and assembly. Its Standard measuring range offers the best compromise between reach and rigidity for general metalworking tasks, while the robust housing and clear display focus on uptime and operator efficiency. Supplied by Microtech Metrology through Metav Werkzeuge, the instrument benefits from Metav’s European supply and quality‑filtering approach: dependable availability, broad product ranges and specialist support tailored to industry requirements. For supply and integration advice from Metav Werkzeuge — ask about system compatibility and delivery from our Emmerich location Technical data Article number: 1432030304 GTIN: 4061905459887 Brand: Microtech Metrology Type: Digital depth caliper Facts Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 11 mm Protection rating: IP67 Special features Wireless data output Swiss Digit digital display Digital instrument Category: Standard (100–300 mm) class Measuring function: Depth measurement FAQ What measuring range does the caliper cover? The depth caliper covers a range of 0–300 mm, categorising it as a Standard class instrument suitable for common workshop and machine‑shop tasks. What resolution and accuracy are specified? Resolution is 0.01 mm and accuracy is ±0.03 mm, with a Swiss Digit display (11 mm) for clear read‑off on the Microtech Metrology depth caliper (SKU 1432030304). Is the instrument suitable for use on the shop floor? Yes — the IP67 rating provides protection against dust and temporary immersion, making the instrument appropriate for industrial workshop environments. How are measurement values transferred? Values are sent via the wireless data output, enabling direct capture into data logging, SPC or inspection software for traceable records. What measurement function does this tool perform? The instrument is designed specifically for depth measurement as a digital depth caliper, focusing on precise and repeatable depth checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Bore Distance Caliper With 10mm Cone Tips, 0.01mm Display, Supplied In Case - Metav IndustryLine
Take advantage of a robust combination of hardened stainless steel construction, a measuring range of 10–300 mm and a clear digital display with PRESET and ON/OFF for reliable bore‑centre measurement in the workshop. Order the Digital Bore Distance Caliper 300 x 100 mm, cone D = 10 mm directly via Metav Werkzeuge or ask our consultants for tailored advice. Digital Bore Distance Caliper 300 x 100 mm, cone D = 10 mm — Metav IndustryLine Digital Bore Distance Caliper 300 x 100 mm, cone D = 10 mm is a precision instrument for measuring centre‑to‑centre distances of bores and related dimensions in metalworking and toolroom environments. Hardened stainless steel construction Measuring range 10–300 mm Digital display with PRESET and ON/OFF 0.01 mm display resolution Consistent accuracy where workshop measurement counts The instrument is built in hardened stainless steel, which provides lasting rigidity and corrosion resistance for everyday use in machine shops. With a measuring range of 10–300 mm, the tool falls into the Standard caliper class, offering the best compromise between reach and stiffness for typical engineering tasks. The 0.01 mm display resolution supports routine quality checks and machining set‑ups where clear, repeatable values are required. Purpose‑designed probe geometry for bore distances A 10 mm cone diameter and a 100 mm probe length enable precise contact in bores and recesses while keeping insertion clearances manageable. The tapered cone allows reliable seating in cylindrical features to determine centre distances between adjacent holes or from reference edges. The instrument’s construction and probe geometry reduce probing error and make the measurement process quicker compared with fiddly improvised fixtures. Digital convenience that speeds inspection workflows The electronic display includes ON/OFF and PRESET functions for fast zeroing and repeated comparative measurements; this reduces setup time during batch inspections. The integrated data output (RB 5) supports connection to measuring data systems or logging devices for traceable documentation of results. The robust build and clear readout simplify day‑to‑day checking, enhancing throughput without compromising measurement reliability. For reliable bore‑centre measurement with Metav IndustryLine precision, contact Metav Werkzeuge in Emmerich for purchase advice and technical clarification at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M240.293 GTIN: 4054469178738 Manufacturer: Metav IndustryLine eClass: 21170344 Customs tariff number: 90173000 Facts Measuring range: 10–300 mm Resolution: 0.01 mm Probe / cone diameter: 10 mm Probe length: 100 mm Weight: 1 kg Special features Material: stainless steel, fully hardened Display: digital with ON/OFF and PRESET buttons Data output: RB 5 Norm: Werksnorm Category: caliper (bore distance measurement) FAQ How accurate is this caliper for routine workshop checks? The caliper offers a 0.01 mm display resolution and is designed for standard workshop accuracy across its 10–300 mm range; it is suitable for machine‑shop quality control where repeatable results are required. Can this tool measure bore centre distances and depths? Yes, the tapered cone and probe geometry permit accurate determination of bore‑to‑bore centre distances and related depth measurements when used as a bore distance caliper. Is the instrument suitable for use on stainless steel and other metals? The caliper’s hardened stainless steel construction ensures compatibility with metalworking environments and resists wear when contacting common workshop materials. Does the device provide a data output for logging measurements? The instrument includes an RB 5 data output option for connection to recording or SPC equipment, enabling measurement logging and traceability. What calibration should be expected on delivery? The tool is supplied to factory standard (Werksnorm); calibration and documentation follow the manufacturer’s standard procedures as stated in the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper For Pipe Wall Thickness Measurement 0.01mm Resolution, IP54, ISO 17025 Calibrated - Microtech Metrology
Benefit from traceable shop‑floor measurement through an ISO 17025‑calibrated instrument, combined with robust IP54 protection and convenient USB data transfer — ideal for standard workshop and quality‑control tasks. Order directly via Metav Werkzeuge or consult our product specialists for application advice. Digital Caliper — 0–300 mm precision, ISO 17025 calibrated, USB output (Microtech Metrology) The Digital Caliper is a 0–300 mm precision caliper with USB data output and IP54 ingress protection, designed for routine measurement tasks in machine shops and quality departments. ISO 17025 calibration certificate included USB data output for traceable records 0–300 mm measuring range IP54 dust and splash protection Traceable accuracy that suits production control The instrument delivers an accuracy of ±0.03 mm with a standard resolution of 0.01 mm, providing a reliable balance between speed and repeatability for production checks. Supplied fully calibrated to ISO 17025, the caliper arrives with an official calibration certificate, which supports internal quality records and audits. For workshop metrology this means fewer follow‑up checks and clearer compliance documentation. Built to perform on the shop floor With an IP54 rating and a jaw length of 50 mm, the gauge resists typical dust and splash exposure while offering stable contact on workpieces. The 0–300 mm measuring range places the tool in the Standard class of calipers, which is the preferred choice for general machining, fixture checks and assembly work because it combines sufficient reach with good stiffness for single‑handed measuring. Practical data handling and ergonomic readout Data transfer is handled via USB, enabling straightforward capture of measurement results into inspection software or spreadsheets for statistical process control. The instrument features a 13 mm digital display for clear readout in various lighting conditions; this reduces reading errors and speeds up logging during batch inspections. No applied measuring force is specified, which helps prevent part deformation on delicate samples. Benefits for workshop efficiency and quality assurance Integration of a calibrated digital gauge shortens inspection cycles and improves traceability: measurements can be recorded directly from the instrument, archived together with the supplied ISO 17025 certificate and referenced during audits. The device’s combination of robust enclosure, practical display and standardised data output supports leaner processes and fewer manual transcription errors in routine quality workflows. Order the Microtech Metrology ISO 17025‑calibrated digital caliper via Metav Werkzeuge for reliable, auditable measurement on the shop floor or request tailored advice from Metav’s consultants at info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 141230300 GTIN: 4061905457845 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Accuracy: ±0.03 mm Resolution (display): 0.01 mm Display height: 13 mm Jaw length: 50 mm Measuring cone diameter: 4 mm Protection class: IP54 Special features Digital display USB data output ISO 17025 calibration certificate included Standard class caliper for workshop use No applied measuring force specified FAQ What level of calibration is supplied with the caliper? The caliper is supplied fully calibrated to ISO 17025 and includes the official calibration certificate from Microtech Metrology. How is measurement data transferred from the instrument? Measurement data is exported via the USB data output for direct capture into inspection software or spreadsheets. Is the caliper suitable for shop‑floor use? Yes; with IP54 protection and a robust design, the caliper is intended for routine measurements in machine shops and quality departments. What measuring range and accuracy does the device offer? The instrument covers 0–300 mm and provides an accuracy of ±0.03 mm with a display resolution of 0.01 mm. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Caliper Retractable Jaw, 0.01mm Resolution, Stainless Steel, Plastic Case - Metav IndustryLine
Benefit from precise shop‑floor measurement with a 0.01 mm digital readout, a practical 0–300 mm measuring range and a hardened stainless‑steel build that resists wear; order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Metav IndustryLine Digital Caliper M240.083.N — 300 mm, hardened stainless steel, adjustable jaw The Digital Caliper M240.083.N is a 300 mm precision caliper for machine‑shop and metalworking measurement, combining an adjustable measuring jaw with a clear digital display for routine quality control. 300 mm measurement range (0–300 mm) Digital readout with 0.01 mm resolution Hardened stainless‑steel construction Adjustable measuring jaw for versatile use ON/OFF, ZERO, UNIT and HOLD controls Accurate readings that speed up quality checks This instrument delivers a 0–300 mm measuring range suited to the standard workshop tasks found in machine and metal construction. With a 0.01 mm display resolution, the caliper provides the fine graduations expected from a digital measuring instrument; in practice, this places it in the same accuracy class as common digital calipers used for production control. The clear numeric display and straightforward controls minimise reading errors and accelerate repetitive measuring sequences, which improves throughput in inspection routines while maintaining consistency across multiple operators. Robust design for repeatable measurement Built from hardened stainless‑steel and housed in a metal casing, the tool is designed to withstand everyday use in busy workshops. The material choice increases wear resistance on contact surfaces and helps preserve the measuring faces over long service intervals. The instrument’s mass and construction give it good profile stiffness, supporting stable contact during measurements and reducing flex‑induced variation when measuring medium‑sized components. The adjustable measuring jaw (130/60 mm jaw geometry) adds practical reach for a wider range of parts without compromising rigidity. Clear display and practical data handling The digital display is equipped with ON/OFF, ZERO, UNIT and HOLD functions for flexible measuring procedures and quick unit changes between millimetres and inches. Power is supplied by a 3 V source, ensuring straightforward battery replacement and reliable operation. For data capture, the caliper provides a data output RB 5, enabling transfer of measurement values to external recording devices or SPC systems where compatible; this feature reduces transcription errors and supports traceable quality workflows on the shop floor. Purpose‑built for workshop standards and everyday use Classified within the standard caliper range, the instrument balances reach, stiffness and one‑hand operation to serve as a universal workshop instrument for dimensions on components, fixtures and assemblies. The construction and controls make it suitable for production inspection, set‑up checks and incoming goods control, where repeatable results and efficient measurement cycles are priorities. Supplied to factory standard, the caliper is aimed at professionals who require dependable, easy‑to‑operate measurement equipment without over‑specification. Contact Metav Werkzeuge for tailored advice or to secure the Metav IndustryLine digital caliper M240.083.N with 300 mm range and 0.01 mm resolution — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M240.083.N GTIN: 4061905038389 Brand: Metav IndustryLine Weight: 0.9 kg Material: hardened stainless‑steel with metal housing Digital display functions: ON/OFF, ZERO, UNIT, HOLD Power supply: 3 V Facts Measuring range: 0–300 mm Resolution (display): 0.01 mm Jaw length: 130/60 mm Data interface: RB 5 Type: digital caliper Special features Hardened stainless‑steel measuring faces Adjustable measuring jaw for inside/outside/stage measurements Factory standard (Werksnorm) Compact, workshop‑oriented design FAQ What measuring range and resolution does the caliper offer? The Digital Caliper M240.083.N provides a 0–300 mm measuring range with a 0.01 mm digital resolution suitable for standard workshop inspection tasks. Is the instrument suitable for routine workshop and metalworking use? Yes — the Metav IndustryLine digital caliper is constructed from hardened stainless‑steel with a metal housing, making it durable enough for everyday workshop measurement. Can measurement data be transferred to external systems? The instrument features a data output RB 5 for external recording; this facilitates connection to compatible data‑collection setups and helps to avoid manual transcription. What power source is required for operation? The caliper operates from a 3 V battery, which is user‑replaceable to keep downtime due to power loss to a minimum. Is a calibration certificate supplied with the caliper? The product is supplied to the manufacturer’s factory standard (Werksnorm); no specific ISO 17025 calibration certificate is stated in the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper With 100mm Jaws, 5mm Bore, Preset, Stainless Steel, Metal Housing, RB5 Output - Metav IndustryLine
Taking advantage of robust stainless steel construction, precise 0.01 mm display resolution and a practical preset function ensures reliable measuring across everyday workshop tasks; a bore for Ø 5 mm measuring inserts increases adaptability for fixture-mounted checks. Order the Digital-Uni-MS 300 mm x 100 mm directly via Metav Werkzeuge or ask our consultants if needed. Digital-Uni-MS 300 mm x 100 mm – Digital caliper with Ø5 mm bore and preset The Digital-Uni-MS 300 mm x 100 mm is a workshop-grade digital caliper designed for standard machine‑shop measurement tasks, offering a stainless steel housing and an integrated bore for measuring‑insert attachments. Robust INOX stainless steel housing High-resolution 0.01 mm digital readout Preset function with ON/OFF and SET controls Reliable workshop measurement with standard reach This digital caliper is built for the standard workshop range, classified under the standard (100–300 mm) size class, which offers a balanced combination of reach and rigidity for daily tasks. The instrument provides a clear 0.01 mm resolution on its digital display, enabling repeatable readings for quality control, assembly checks and setup work. The solid stainless steel housing protects the measuring slide against knocks and grime, while the overall design keeps the unit straightforward to handle during routine inspections. The presence of a preset function reduces setup time when repeatedly checking reference dimensions. Practical connectivity and power for data workflows Equipped with an RB 5 data output and a low-voltage 3 V supply, the caliper supports integration into measurement chains or manual data logging routines. The data interface facilitates transfer of measured values to compatible downstream devices, which simplifies documentation and reduces transcription error in production environments. The instrument’s simple ON/OFF and SET/PRESET keypad lets operators capture and hold reference values quickly, improving throughput on repetitive measurement tasks without sacrificing accuracy. Adaptable mounting and workshop resilience A dedicated bore of Ø 5 mm allows attachment of measuring inserts or fixtures, which is useful for repeat gauging or when the caliper is mounted in a holding device for inline checks. The INOX finish and metal housing resist workshop conditions better than lighter-plastic alternatives, contributing to long-term dimensional stability. With a jaw length of 100 mm the caliper offers firm contact for reliable external and internal measurements across typical components encountered in metalworking and general fabrication. Clear benefits for procurement and workshop managers Choosing this digital caliper brings measurable efficiency: the combination of an easy-to-read 0.01 mm display, preset capability and a robust housing reduces measurement downtime and the risk of damage during daily use. The built-in bore for measuring inserts extends the unit’s utility for fixture-based processes, while the RB 5 output supports basic data-handling workflows without complex setup. Supplied to factory standard, the instrument represents a practical, durable option for workshops seeking dependable, repeatable measurements. For fast procurement or technical clarification, contact Metav Werkzeuge for ordering and advice on how the Digital-Uni-MS 300 mm x 100 mm can be integrated into existing inspection routines. Technical Data Article number: M240.209.O GTIN: 4054469151977 Material: stainless steel housing Label: Digital-Uni-MS 300 mm x 100 mm, bore Ø=5 mm, without inserts, preset, INOX, factory standard Data output: RB 5 Power: 3 V Display type: digital with ON/OFF and SET/PRESET button Facts Measuring range: 0–300 mm Resolution: 0.01 mm Jaw length: 100 mm Weight: 1 kg ECLASS: 21170344 Special features INOX stainless steel housing Preset function and SET/PRESET controls Bore Ø 5 mm for measuring inserts RB 5 data interface Supplied to factory standard FAQ What level of accuracy can be expected from this caliper? The Digital-Uni-MS 300 mm x 100 mm features a 0.01 mm display resolution; in workshop use this provides precise, repeatable readings suitable for standard quality control and setup tasks. Can the caliper be connected to a PC or data logger? Yes, the instrument includes an RB 5 data output for straightforward connection to compatible data-capture devices and logging systems. Is the unit suitable for heavy workshop conditions? The INOX stainless steel housing and robust construction make the caliper resilient for everyday machine‑shop and fabrication environments. Does the caliper accept attachments or fixtures? A bore of Ø 5 mm is provided for mounting measuring inserts or fixturing, improving adaptability for repetitive or fixture-based measurement routines. What power source does the caliper require? The caliper operates from a 3 V source and includes simple ON/OFF and SET/PRESET controls for efficient use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper With 100mm Jaws, 7 Pair Measuring Inserts Preset, Stainless Steel, Plastic Case - Metav IndustryLine
The combination of fast digital readout, interchangeable preset inserts and a robust INOX metal housing delivers dependable shop-floor accuracy and repeatable results; order the Digital‑Uni‑MS 300 mm x 100 mm directly via Metav Werkzeuge or consult the technical team for application advice. Digital‑Uni‑MS 300 mm x 100 mm — Digital standard caliper with Ø5 mm insert mount (Metav IndustryLine) The Digital‑Uni‑MS 300 mm x 100 mm is a digital standard caliper for workshop and production measurements, offering a 0–300 mm measuring range and preset capability for repeatable part checks 0.01 mm digital resolution display Ø 5 mm mount for interchangeable inserts Includes 7 pairs of preset measuring inserts Sturdy INOX metal housing for workshop use Precise workshop measurement with digital clarity The caliper is designed as a standard caliper for routine machine‑shop and metalworking tasks, covering the 0–300 mm range that forms the universal workshop basis. Its digital display has a 0.01 mm resolution, which supports fast visual checks and reduces reading errors compared with a mechanical scale. The unit's ON/OFF and SET/PRESET controls allow rapid zeroing and preset functions, enabling reproducible checks on production runs. With a measured weight of approximately 1 kg and a compact jaw length, the instrument balances reach and rigidity for everyday quality control. Flexible measurement concept and process integration A dedicated Ø 5 mm mounting accepts interchangeable measuring inserts, supplied as 7 pairs of preset inserts, which simplifies changeover between different measurement tasks and reduces fixture time. The preset feature means common reference values can be stored and recalled, accelerating repetitive inspections. For data handling the caliper provides an RB 5 data output suitable for connection to SPC systems or hand‑held loggers, supporting traceable measurement collection and integration into production monitoring workflows. The metal housing in INOX finish protects the electronics and sliding surfaces against shop contaminants. Practical operation and robustness for daily use Electrical operation is provided via a 3 V supply, supporting extended run times with standard cells and simple field replacement. The instrument is delivered to workshop standard and is intended for reliable everyday use in environments that demand durability without sacrificing ease of operation. The combination of a clear digital readout, preset insert system and a robust metal housing reduces process variance and helps maintain consistent part quality across batches, making it an effective tool for assembly, jigs and corrective measurement tasks. Choose the Metav IndustryLine Digital‑Uni‑MS 300 mm x 100 mm for dependable shop‑floor measurement and contact Metav Werkzeuge in Emmerich for tailored technical advice and delivery arrangements via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.209.N GTIN: 4054469160030 Manufacturer: Metav IndustryLine Data and measurements Measuring range: 0–300 mm Resolution: 0.01 mm Weight: 1 kg Power supply: 3 V Jaw length: 100 mm Tariff code: 90173000 Special features and equipment Metal housing, INOX finish Digital display with ON/OFF and SET/PRESET buttons RB 5 data output Mounting Ø 5 mm for measuring inserts Includes 7 pairs of preset measuring inserts Supplied to factory standard (Werksnorm) Suitable for internal and external measurements FAQ Is this caliper suitable for general machine‑shop inspection tasks? The Digital‑Uni‑MS 300 mm x 100 mm from Metav IndustryLine is designed for standard workshop inspection and offers the 0–300 mm range and 0.01 mm resolution commonly used in machine‑shop quality control. Can the caliper transmit measurements to a data logger or PC? Yes — the instrument features an RB 5 data output that supports connection to SPC equipment and data loggers for process integration and documentation. What is included with the caliper for repetitive measuring tasks? The caliper is supplied with seven pairs of preset measuring inserts and a preset function, allowing quick tool changes and repeatable reference measurements. Is the housing suitable for a shop environment? The unit has a robust metal housing in an INOX finish, providing enhanced resistance to routine shop contaminants and mechanical wear. Does the caliper require special batteries or maintenance? The caliper operates on a standard 3 V supply; routine maintenance consists of keeping the sliding surfaces clean and checking the preset inserts for wear as part of normal workshop practice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper With 60mm Jaws And Rounded Measuring Tips, Stainless Steel, Battery Operated - Metav IndustryLine
Precision of ±0.05 mm accuracy, a 300 mm measuring range and hardened stainless‑steel construction combine to deliver dependable workshop measurements and long service life; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital caliper M240.059 — 300 mm range with round gripping tips (Metav IndustryLine) Digital caliper M240.059 offers a robust, workshop‑ready solution for internal and external measurements with extended‑reach round gripping tips for hard‑to‑access features. 300 mm measuring range Hardened stainless‑steel construction Digital display with On/Off, Zero, Unit, Hold Delivered in a transport case Reliable precision for everyday inspection The instrument delivers an industrially practical accuracy of ±0.05 mm with a standard resolution of 0.01 mm, making it suitable for routine quality control and assembly work. Classified in the Standard range (up to 300 mm), this caliper balances reach and rigidity so that measurements remain reproducible across common workshop tasks. The clear numerical readout minimises interpretation errors and reduces rework, which improves throughput and supports a consistent production rhythm. Extended reach and secure handling for varied measurements Designed with round gripping tips and a 157 mm gripping length, the device reaches recessed and awkward features while the 60 mm jaw length supports stable external measurements. The hardened stainless‑steel construction and compact 0.5 kg weight make the instrument robust yet manageable for one‑hand operation. Internal measurements are practical from about 10 mm upwards, so the caliper covers typical machine‑shop needs—from small fittings to medium assemblies—without sacrificing stiffness or control. Fast readout and reliable data flow for traceable results The digital readout features On/Off, Zero, Unit and Hold functions for quick setup and consistent workflows; the hold function aids transfer of readings away from the workpiece. Data output via RB 5 and the 3 V power supply simplify integration into inspection stations and reduce manual transcription. The transport case included ensures safe delivery and protects the tool between uses, supporting reliable long‑term performance and straightforward storage. Contact Metav Werkzeuge in Emmerich for tailored advice on the M240.059 digital caliper and guidance on integrating it into existing inspection routines Technical data Article number: M240.059 GTIN: 4054469182308 Manufacturer SKU: M240.059 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.05 mm Weight: 0.5 kg Jaw length: 60 mm Gripping tips length: 157 mm Special features Material: hardened stainless steel with metal housing Digital display with On/Off, Zero, Unit, Hold Data output: RB 5 Power: 3 V battery Delivered in transport case FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 0–300 mm, placing it in the standard class suitable for general machine‑shop and assembly measurements. How precise is the instrument for workshop use? The instrument offers a resolution of 0.01 mm and an accuracy of ±0.05 mm, appropriate for standard industrial quality checks and routine inspection tasks. Can internal diameters be measured with this caliper? Yes, internal measurements are supported from about 10 mm upwards; the extended gripping tips and precise digital readout facilitate access to recessed bores and cavities. Is the caliper protected for transport and storage? The tool is supplied in a transport case to protect it during shipping and when not in use, ensuring consistent performance and reducing the risk of damage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision where standard calipers reach their limits
Specialised calipers (also available as specialist calipers and precision calipers) are engineered for measurements that conventional calipers cannot perform reliably. With custom‑shaped jaws, extended measuring ranges and advanced materials, these tools deliver reproducible results down to the micrometre range, making them indispensable for difficult‑to‑access features such as fine grooves, deep bores and complex contours.
How these calipers tackle demanding measurement tasks
Specialised calipers work by adapting jaw geometry and sensing technology to the application: pointed, blade‑shaped, round or offset jaws capture inside and outside dimensions in confined geometries, while digital, analogue and inductive sensing cover different shop and lab requirements. Digital variants offer quick readouts and data transfer via Bluetooth/USB; analogue models remain reliable in humid or rough workshop environments; inductive versions provide extreme accuracy of ±0.001 mm (1 μm), suited to inspection rooms and laboratories. Wear‑resistant materials such as carbide or ceramic tips withstand coolants, abrasion and corrosion for sustained accuracy.
Measurable benefits for production and inspection
- Faster, repeatable measurements in constrained geometries, reducing inspection time.
- Reproducible results to the micrometre range, raising process reliability.
- Longer service life thanks to carbide or ceramic tips, lowering tool replacement frequency.
- Seamless data integration: digital specialised calipers can feed results directly into CAQ systems via Bluetooth/USB, supporting inline quality control.
- Robust performance across environments—from workshop floors to clean labs—thanks to analogue and inductive options.
Metav as a dependable partner for precision measurement
Metav combines decades of expertise with a comprehensive selection for industry, craft and trade. From Emmerich, Metav operates as a quality filter for the European market, supplying high‑precision tools across more than 250,000 product lines. Trusted by over 48,000 customers, Metav makes high accuracy accessible to every workshop while ensuring reliable fulfilment and consistent product quality.
FAQ
What accuracy can I expect from specialised calipers?
Inductive specialised calipers achieve extreme accuracy of ±0.001 mm (1 μm); digital models enable quick readout and transfer, while analogue versions provide reliable shop‑floor stability.
Which jaw shapes are available and what are they best for?
Specialised calipers come with pointed, blade‑shaped, round and offset jaws designed to measure features such as wall thickness of glass ampoules, gear tooth profiles and O‑ring grooves that standard calipers cannot access.
Can specialised calipers be used for inline quality control?
Yes. Digital specialised calipers with Bluetooth/USB support direct data transfer to CAQ systems, enabling inline testing and automated documentation in series production.
Are there variants suited to harsh workshop environments?
Analogue specialised calipers are less sensitive to moisture and rough handling, and units fitted with carbide or ceramic tips resist coolants, abrasion and corrosion for durable, accurate performance.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com