Precision specialist calipers for inaccessible measurements
Specialist calipers are engineered to measure fine grooves, deep bores and complex contours with reproducible accuracy down to the micrometre, delivering reliable results where standard calipers reach their limits. Designed with customised jaw shapes and robust materials such as carbide or ceramic tips, these calipers excel in measuring thin-walled aerospace structures, medical implants and intricate toolroom cavities while resisting coolants and abrasion. Available as digital, analogue and inductive variants, they offer options from quick-read displays and data transfer to extreme accuracy of ±0.001 mm for laboratory use. By combining tailored jaw geometries with durable construction, these precision tools improve inline quality control and support both prototype and series production.
200mm Digital Internal Groove Caliper With Preset, Stainless Hardened, Plastic Case - Metav IndustryLine
Take advantage of reproducible groove measurements through stainless-steel durability, precise 0.01 mm resolution and fast presetting for consistent quality control; order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Metav IndustryLine Digital internal groove caliper M240.037.N — 23–200 mm, stainless steel, preset (3 V) A Digital internal groove caliper M240.037.N designed for precise measurement of internal grooves, slots and narrow bores in metalworking and quality assurance environments Digital display with ON/OFF and preset Hardened stainless-steel construction Measuring range 23–200 mm Precision where workshop measurements count The caliper is classified as a standard-range instrument (maximum measuring range 100–300 mm), making it suitable for routine tasks in machine and metal workshops. With a measuring range of 23–200 mm and a display resolution of 0.01 mm, the instrument provides clear numerical readouts that reduce reading errors compared with analogue scales. The hardened stainless-steel construction and metal housing increase resistance to wear and corrosion, while the 70 mm beak length permits reliable access into narrow grooves and slots. These characteristics translate into fewer re-measurements and a steadier production flow for standard-size components. Faster documentation and fewer transcription errors Equipped with a preset function and an integrated RB 5 data output, this digital caliper simplifies zeroing and downstream data capture. Measurements can be stabilised and zeroed quickly on the display, then transferred via the RB 5 interface to a logging system or data collector to maintain traceable records. The combination of a responsive digital readout and a machine-compatible data output streamlines quality-control routines, improving throughput and reducing administrative effort. The 3 V power supply provides compact, long-lasting operation for daily workshop use. Robust design for everyday industrial use Built with a hardened measuring slide and a protective metal housing, the instrument is engineered for the demands of the workshop. The materials and construction ensure dimensional stability and longevity under regular handling. As a precision tool delivered to factory standard, it supports consistent inspection steps and helps avoid costly rework. Metav’s emphasis on accessible precision and a reliable supply chain further supports small and large operations alike, providing quality assurance that aligns with professional workshop practices. Choose the Metav IndustryLine digital internal groove caliper for dependable groove measurement and contact Metav Werkzeuge in Emmerich for tailored advice and swift, reliable delivery — info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: M240.037.N GTIN: 4054469159935 Measuring range: 23–200 mm Resolution: 0.01 mm Weight: 0.4 kg Power supply: 3 V Display: ON/OFF and Zero/Preset Numbers / core technical data Measuring range min: 23 mm Measuring range max: 200 mm Readout increment: 0.01 mm Beak length: 70 mm Unit weight: 0.4 kg Special features Hardened stainless-steel construction with metal housing Digital display with preset function Data output: RB 5 Factory standard delivery Category: calipers FAQ How accurate is the instrument for routine shop measurements? The caliper delivers a 0.01 mm display resolution and is intended for standard workshop precision; its design supports consistent routine measurements for production and inspection. Can measurements be recorded electronically? Yes — the instrument includes an RB 5 data output that facilitates transfer of readings to compatible data-collection systems for traceable documentation. Is the caliper suitable for measuring narrow grooves and slots? The 70 mm beak length and the specific groove-measurement geometry make the tool well suited for internal grooves, slots and similar narrow bores in metalworking. What materials is the caliper made from and how durable is it? Constructed from hardened stainless steel with a metal housing, the caliper is designed for durability and resistance to workshop wear and corrosion. Does this product come from a trusted provider of measurement tools? Metav IndustryLine supplies this caliper as part of a broad precision range; Metav Werkzeuge’s quality control and logistics support supply reliability across workshops and trade customers. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Precision Caliper Digital Display 0.01mm Resolution IP54, ISO 17025 Calibrated - Microtech Metrology
Benefit from precise, traceable measurement with a fully calibrated ISO 17025 certificate, a clear 9 mm digital display and reliable USB data output; the combination of documented accuracy and workshop‑grade protection ensures repeatable results for production and inspection. Order the instrument directly via Metav Werkzeuge or consult the Metav advisors for integration and traceability advice. Digital Precision Caliper – 0–200 mm, USB, IP54 (Microtech Metrology) The Digital Precision Caliper is a standard‑range measuring instrument designed for machine and metalworking tasks up to 0–200 mm, offering documented calibration and industrial connectivity for routine quality control. Fully calibrated to ISO 17025 Measuring range 0–200 mm USB data output for traceable records IP54 splash and dust protection Accurate measurements with documented traceability A clear focus on measurable performance: this caliper delivers a resolution of 0.01 mm and a verified accuracy of ±0.03 mm, making it suitable for standard workshop quality checks and production sampling. Supplied fully calibrated to ISO 17025, the instrument arrives with a calibration certificate that documents measurement traceability and reduces the administrative effort for quality departments. The classification as a standard range caliper underlines the balance between reach and stiffness that workshop applications require. Faster data capture and fewer transcription errors Integrated USB output and an easily readable 9 mm display streamline data collection in inspection workflows. Direct electronic transfer removes manual transcription and accelerates statistical process control, while the digital interface supports straightforward logging of measurement series. The electronic readout and data link also simplify reporting and part‑approval routines, so measurement values can be archived or fed into quality software with minimal handling. Robust handling for everyday workshop use Built to withstand workshop conditions, the instrument carries an IP54 rating for resistance against splashes and dust, extending reliable operation in harsher environments. The 0–200 mm measuring range is a universal choice for metalworking and general engineering—the length offers good stiffness for one‑hand operation while covering most common components. The absence of a dedicated measuring force mechanism keeps the design simple and durable for frequent use. A dependable choice supported by Metav Selected from Microtech Metrology, this calibrated instrument supports production reliability through precise measurement and digital traceability. Metav’s supply chain in Emmerich combines product range and quality control so procurement teams receive a ready‑to‑use measuring tool with verified documentation. For engineering and quality teams seeking consistent results, the device represents a practical combination of accuracy, connectivity and workshop durability. Contact Metav Werkzeuge today to arrange delivery of the calibrated Microtech Metrology digital precision caliper (SKU 141430200) and to discuss how USB data output can be integrated into existing quality processes. Technical data Article number: 141430200 GTIN: 4061905459436 Manufacturer: Microtech Metrology Facts Measuring range: 0–200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 9 mm IP rating: IP54 Special features Digital display USB data output Delivered calibrated to ISO 17025 with certificate No measuring force Electronic/digital instrument FAQ Is the caliper delivered with a calibration certificate? The Digital Precision Caliper from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes a calibration certificate with the delivery (SKU 141430200). What level of accuracy and resolution can be expected? The device provides a resolution of 0.01 mm and a verified accuracy of ±0.03 mm, suitable for standard workshop and production quality checks. Can measurement data be exported directly to a PC? Yes, the caliper features a USB data output so measurement values can be transferred electronically for logging and quality documentation. What does the IP54 rating mean for workshop use? IP54 indicates protection against limited dust ingress and splashing water, making the instrument resilient in typical workshop environments without full immersion protection. Is the 0–200 mm range suitable for machine‑shop tasks? The 0–200 mm range corresponds to the standard category, offering the practical reach and stiffness required for everyday machining and metalwork measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Digital Precision Caliper For Internal Grooves Wireless Swiss Digit Display IP67, ISO 17025 - Microtech Metrology
Take advantage of precise, traceable measurements together with robust workshop readiness: the combination of accuracy ±0.03 mm, Wireless data output and an ISO 17025 calibration certificate ensures reliable inspection results and fast data capture. Order the instrument directly via Metav Werkzeuge or contact the Metav team for tailored advice and a quote. Microtech Metrology digital caliper — Wireless, ISO 17025 calibrated The Microtech Metrology digital caliper is a workshop-grade measuring instrument designed for general machine‑ and metalworking inspection tasks, offering a practical measurement span and proven traceability. Wireless data output for seamless capture IP67 protection against dust and water Supplied with ISO 17025 calibration certificate Swiss Digit display, 11 mm height Consistent precision across standard workshop tasks This digital caliper delivers accuracy ±0.03 mm across a measurement range 9–200 mm, placing it in the Standard category for everyday machine‑shop use. That combination of reach and stiffness is ideal for component inspection and routine quality control where repeatable results matter. The specified accuracy reduces rework and inspection time by giving a verifiable error band for pass/fail decisions, while the moderate jaw geometry keeps handling intuitive for single‑handed operation. Fast, reliable data handling to reduce transcription errors Equipped with Wireless data output and a clear Swiss Digit display (11 mm), the instrument streamlines data collection and documentation. Wireless transfer removes manual logging steps, cutting the risk of transcription mistakes and speeding up batch inspections. The large digit height improves readability under workshop lighting, which reduces operator fatigue and supports consistent recording of measured values in digital quality systems. Durable design for use at the bench or on the shop floor Built to withstand workshop conditions, the caliper features IP67 protection and practical jaw lengths 30/70 for access into grooves and stepped profiles. The sealed electronics and sturdy slider mean the device remains serviceable in dusty or damp environments, reducing downtime and protecting measurement integrity. Delivered fully calibrated to ISO 17025 with a calibration certificate, the instrument provides documented traceability suitable for internal audits and supplier acceptance procedures. Contact Metav Werkzeuge in Emmerich for a tailored quotation or technical consultation — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 — Metav’s team will advise on implementation and compatibility with existing data systems Technical data Article number: 141220204 GTIN: 4061905459634 Brand: Microtech Metrology Type: Digital caliper Facts Measurement range: 9–200 mm (top jaw) / 17–200 mm (bottom jaw) Max measurement range: 200 mm Accuracy: ±0.03 mm Display: Swiss Digit, 11 mm height Protection class: IP 67 Special features Wireless data output Supplied with ISO 17025 calibration certificate Jaw lengths: 30/70 Digital instrument for workshop and inspection use FAQ Is the caliper delivered calibrated and traceable? Yes. The Microtech Metrology digital caliper is supplied fully calibrated with an ISO 17025 calibration certificate, providing traceability for audit and quality‑control needs. How is measurement data transferred from the instrument? Data is sent via the caliper’s Wireless output; the instrument supports wireless capture workflows to speed up recording and reduce manual entry. What environments is the caliper suitable for? With IP67 protection, the caliper tolerates dust and temporary immersion, making it suitable for many bench and shop‑floor conditions where robustness is required. Which measurement tasks suit this caliper best? The range and jaw geometry make it well suited to general machining, toolroom inspection and component checks where the 9–200 mm span covers typical parts. What display and readability features are available? The caliper uses a Swiss Digit display with 11 mm character height for clear numeric readout, improving visibility during repetitive inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Digital Precision Caliper For Internal Grooves, IP54, ISO 17025 Calibration - Microtech Metrology
Take advantage of the ready-to-use, ISO 17025 calibrated instrument with USB data output and robust IP54 protection for reliable groove inspections; the combination of traceable calibration, measurable accuracy and straightforward data capture supports consistent quality control. Order the calibrated gauge directly via Metav Werkzeuge or consult our specialists for application advice. Digital Caliper for Internal Grooves — Microtech Metrology (USB, ISO 17025 calibrated) The Digital Caliper for Internal Grooves is a USB-capable, workshop-grade measuring instrument designed for precise inspection of internal grooves and similar features. Digital display with 13 mm digits USB data output for traceable records Delivered calibrated to ISO 17025 Robust IP54 protection rating Ready-to-use accuracy and certified traceability Delivered fully calibrated to ISO 17025, this digital measuring instrument provides immediate traceability and removes the need for in-house first-time calibration. The unit specifies an accuracy of ±0.03 mm, matching the expected performance for instruments in the standard caliper class (up to 300 mm). With a measurement range 9–200 mm (upper) / 17–200 mm (lower) the device sits in the Standard category for workshop metrology, offering a balanced combination of reach and stiffness that suits everyday machine‑shop and quality‑control tasks. Fast digital documentation to reduce downtime Equipped with USB data output and a clear electronic display (digit height 13 mm), this gauge minimises transcription errors and speeds up recording of measured values. The electronic readout uses a resolution of 0.01 mm, which supports quick decisions on pass/fail criteria during batch checks. Exporting measurement data directly from the instrument streamlines inspection workflows and simplifies integration into traceability records or laboratory information systems. Designed for practical workshop demands The caliper’s construction prioritises consistent readings during routine use. An IP54 enclosure rating guards against workshop dust and light splashing, extending service intervals in demanding conditions. The unit features jaw lengths of 30/70 mm, tailored for reliable engagement in internal groove geometries; the shorter and longer jaw sections help reach confined profiles while maintaining jaw stability and repeatability. Suitable applications and operational benefits This instrument is particularly useful in toolmaking, component inspection and general quality assurance where internal groove measurement is frequent. The calibrated status, robust protection and digital interface combine to increase throughput and reduce measurement uncertainty in production checks. Metav’s distribution adds logistics reliability and a single-point supply route for replacements and complementary metrology tools, supporting uninterrupted workshop operations. For traceable precision and practical documentation, acquire the Microtech Metrology ISO 17025 calibrated digital caliper via Metav Werkzeuge or contact Metav Werkzeuge for tailored technical guidance. Technical data Article number: 141220200 GTIN: 4061905082030 Manufacturer: Microtech Metrology Facts Measurement range: 9–200 mm (upper) / 17–200 mm (lower) Resolution: 0.01 mm Accuracy: 0.03 mm Display digit height: 13 mm Protection rating: IP 54 Special features Digital display USB data output Delivered calibrated to ISO 17025 with certificate Jaw lengths 30/70 mm Designed for internal groove measurement FAQ How accurate is the instrument for workshop measurements? The digital caliper from Microtech Metrology specifies an accuracy of ±0.03 mm, which aligns with standard expectations for calipers in this measurement class and range. Is the caliper supplied with a calibration certificate? Yes, the instrument is delivered fully calibrated according to ISO 17025 and includes the corresponding calibration certificate for traceable documentation. Can internal grooves be measured reliably with this gauge? The caliper is designed specifically for internal groove inspection, featuring dedicated jaw geometry and a measurement range of 9–200 mm (upper) / 17–200 mm (lower) suitable for many groove sizes. How is measurement data exported from the device? Measurement values are exported via the built-in USB interface, enabling direct transfer to inspection software or a PC for documentation and analysis. Is the instrument robust enough for everyday shop use? Yes, the IP54 rating provides protection against dust and splashing, making the caliper well suited to routine workshop environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Digital Precision Caliper for Pipe Wall Thickness Measurement Swiss Digit Display IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise, traceable measurement delivered with robust ingress protection and handcrafted measuring jaws — ideal for reliable workshop quality control. Choose the calibrated solution with ISO 17025 certification and quick-read digital display; order via Metav Werkzeuge or consult our advisors for application-specific advice. Digital Caliper 0–200 mm by Microtech Metrology — IP67, ISO 17025 calibrated A Digital Caliper 0–200 mm designed for standard workshop and industrial measurement tasks, combining rugged protection and metrological traceability in a compact instrument. IP67 protection for harsh environments ISO 17025-calibrated with certificate High-precision 0.01 mm resolution Consistent accuracy for quality assurance The instrument delivers a reproducible measurement basis thanks to its 0.01 mm resolution and an indicated accuracy of ±0.03 mm; this makes it suitable for standard machining and incoming inspection where repeatable tolerances matter. The included ISO 17025 calibration and accompanying certificate provide documented traceability for production records and audit purposes, reducing uncertainty in part acceptance and supporting quality-management processes. Built to withstand workshop conditions Engineered for everyday industrial use, this caliper carries an IP67 rating that protects internal electronics from dust and temporary immersion, extending service intervals in wet or chip-prone environments. The handcrafted measuring jaws and a 50 mm jaw length ensure a secure contact geometry, while the slide is self-lubricating for smooth operation under frequent use. Together these features reduce handling errors and deliver robust performance on the shop floor. Faster inspections, fewer reworks The combination of a clear Swiss Digit display (11 mm high digits) and a compact 0–200 mm measuring range speeds routine checks without compromising rigidity — classified as a Standard caliper size that balances reach and stiffness for most metalworking tasks. Rapid, legible readings and the instrument’s mechanical quality help to shorten inspection cycles, supporting throughput improvements and fewer corrective actions during production. For ISO 17025-certified measurement with rugged IP67 protection, contact Metav Werkzeuge to discuss delivery options or specific application requirements and secure the right measuring solution for your process. Technical Data Article number: 141230203 GTIN: 4061905037375 Manufacturer: Microtech Metrology Facts Measuring range: 0–200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Jaw length: 50 mm Display height: 11 mm Special features IP67 protection ISO 17025 calibration with certificate Handcrafted measuring jaws Self-lubricating slide Swiss Digit display FAQ What measuring range does this caliper cover? The caliper measures within a 0–200 mm range, making it a Standard-size instrument for workshop and machine-shop applications. Is the instrument delivered calibrated? Yes — the Digital Caliper is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability. How precise is the readout? The readout resolution is 0.01 mm with an overall stated accuracy of ±0.03 mm, suitable for standard quality-control tasks. Can this caliper be used in damp or dusty environments? The caliper is rated IP67, which protects the electronics from dust and temporary immersion, so it is well suited to harsher workshop conditions. Who manufactures this caliper? The instrument is produced by Microtech Metrology (see manufacturer details below) Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Digital Precision Caliper Swiss Digital Display 0.01mm Resolution IP67 - Microtech Metrology
Take advantage of a precise 0–200 mm measuring range, robust IP67 protection and low-maintenance self-lubricating slides for reliable workshop inspection and uninterrupted quality control. Order the item through Metav Werkzeuge or consult the specialists for application advice. Digital Caliper — 0–200 mm workshop caliper with IP67 and Swiss display The Digital Caliper is a workshop-grade measuring instrument designed for routine dimensional inspection and quality control across machine shops, toolrooms and inspection benches. IP67 protection for harsh workshop use Swiss Digital display, 11 mm height 0–200 mm range for standard workshop tasks Self-lubricating slides for low maintenance Consistent precision for everyday quality control The caliper provides resolution of 0.01 mm with an indicated practical accuracy of ±0.03 mm, a performance level that aligns with standard digital measuring practice for ranges up to 300 mm. That combination delivers repeatable results for batch inspections and setup checks, reducing process variance and scrap rates. The instrument’s 0–200 mm span places it in the standard class of workshop calipers, offering the best compromise between reach, rigidity and one‑hand handling for common production and maintenance tasks. Built to withstand workshop conditions Protection to IP67 means the instrument tolerates dust ingress and temporary immersion, making it suitable for coolant‑rich environments and regular shop use. The unit features self-lubricating slides to reduce wear and maintenance intervals, while the Swiss Digital display with an 11 mm character height improves legibility at the bench or on the machine. These attributes combine to cut downtime: robust sealing and low‑friction movement preserve measurement integrity over the long term. Practical design that speeds inspection A jaw length of 43 mm gives better access into grooves and recesses without sacrificing stability, and the clear digital readout accelerates checks compared with analogue scales. The lightweight construction and compact geometry support rapid dimensional comparisons and fixture setup, helping to shorten cycle times during inspection rounds. Where traceable reporting is required, the caliper’s clear numeric output simplifies documentation and reduces transcription errors on inspection sheets. A reliable partner for precision at scale Metav’s role is to make accurate measuring technology accessible to every workshop; the distribution hub in Emmerich serves as a quality filter for the European market. With a broad product range and long experience in metrology supply, Metav Werkzeuge supports implementation across industries, from small trade workshops to industrial production. This caliper combines practical durability with measurement certainty, backed by a supplier network experienced in precision tools and workplace integration. For procurement or technical guidance on this Microtech Metrology digital caliper, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and delivery options Technical data Article number: 141430203 GTIN: 4061905037795 Manufacturer: Microtech Metrology Facts Measuring range: 0–200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 11 mm Special features IP67 protection Self-lubricating slides Swiss Digital display Jaw length: 43 mm Digital caliper eClass: 21170344 SKU: 141430203 FAQ What accuracy can be expected from this caliper? The instrument delivers an accuracy of ±0.03 mm, with a display resolution of 0.01 mm, making it suitable for standard workshop quality control tasks. Is the caliper suitable for wet or coolant‑exposed environments? Yes — the unit has an IP67 rating, which protects against dust ingress and temporary immersion, so it performs reliably in coolant‑exposed conditions. Does the caliper require frequent maintenance? The self‑lubricating slides reduce maintenance needs and help preserve measurement consistency over time, lowering lifecycle costs. Which product and brand is this exactly? This is the Microtech Metrology digital caliper (SKU 141430203), a workshop caliper with a 0–200 mm range and Swiss Digital display. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Digital Precision Caliper Three-Point Measurement, Swiss Digit Display 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a durable, workshop-ready digital caliper that combines robust environmental protection and traceable calibration for reliable daily measurements. The IP67-rated construction, high-contrast Swiss Digit display and ISO 17025 calibration certificate ensure reproducible results and straightforward integration into quality control workflows; order directly via Metav Werkzeuge or consult the team for technical advice. Precision Caliper 141220203 (Digital, IP67, ISO 17025) — Microtech Metrology Precision Caliper 141220203 is a digital measuring instrument designed for standard workshop and industrial applications, offering a protected housing and a clear Swiss Digit display for fast, repeatable readings Digital display Swiss Digit 11 mm IP67 dust and water protection ISO 17025 calibrated with certificate Measuring range up to 200 mm Consistent accuracy for routine quality control The instrument delivers a balance of reach and stiffness typical of the standard range class (measuring capacity to 200 mm), making it suitable for general machine‑shop and metal‑working tasks. With a display resolution of 0.01 mm and an indicated accuracy of 0.03 mm, the device supports faster inspection cycles and reduces rework by providing reliable, reproducible measurements. The numeric performance figures allow planners to compare inspection capabilities objectively and to define acceptance criteria in production documentation. Designed for demanding environments and clear readability A sealed construction rated IP67 protects the electronics against dust ingress and short-term immersion, which keeps the instrument operational in wet or contaminated shop-floor conditions. The Swiss Digit display (11 mm digit height) ensures that readings remain legible at a glance under factory lighting; this reduces handling time during batch inspections and speeds up throughput without sacrificing measurement confidence. Robust front-end mechanics and a compact jaw geometry offer stable contact for everyday dimensional checks. Traceable calibration to support compliance This caliper is supplied fully calibrated, accompanied by a traceable ISO 17025 calibration certificate. That formal attestation documents metrological traceability and measurement uncertainty, which simplifies internal quality audits and supplier qualification. For procurement and QA records, the certificate provides documented proof that the instrument was delivered within defined tolerances and is ready for use in formal inspection procedures. Practical handling and integration in the workshop The instrument is a digital caliper with short and long jaw variants (30/70 mm tip lengths) and a plain, intuitive control set for zeroing and unit selection. The combination of visible digits, robust sealing and a compact footprint supports both bench‑top inspection and mobile checks at assembly stations. Ergonomic design choices keep operator fatigue low while maintaining precision, so results remain consistent over extended measurement runs. For a reliable inspection solution backed by Metav’s quality filter and European warehousing, contact Metav Werkzeuge to arrange delivery or technical consultation for this Microtech Metrology caliper (SKU 141220203) Technical data Article number: 141220203 GTIN: 4061905459580 Manufacturer: Microtech Metrology Facts Measuring range: 9 mm–200 mm (upper jaw) and 17 mm–200 mm (lower jaw) Resolution: 0.01 mm Accuracy: 0.03 mm Display: Swiss Digit, digit height 11 mm Protection rating: IP67 Special features Digital caliper with sealed electronics Delivered with ISO 17025 calibration certificate Jaw tip lengths: 30/70 mm Suitable for standard workshop and machine‑shop inspection FAQ Is this caliper supplied with a calibration certificate? Yes. The Microtech Metrology Precision Caliper 141220203 is supplied fully calibrated with an ISO 17025 certificate. What is the maximum measuring range and classification of this instrument? The caliper covers up to 200 mm, placing it in the standard measurement class suitable for general machine‑shop and metal‑working applications. How precise are the readings on the display? The instrument shows readings at 0.01 mm resolution with an indicated accuracy of 0.03 mm, appropriate for routine quality control. Can the caliper be used in damp or dirty workshop conditions? Yes. The caliper features an IP67 rating, providing protection against dust and temporary immersion, which enhances durability in challenging environments. Does the display remain legible on the shop floor? The Swiss Digit display with 11 mm high digits improves readability under workshop lighting and during quick inspection cycles. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Digital Precision Caliper Wireless Display 0.01mm Resolution IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of ISO 17025 traceable calibration, wireless data output and robust IP67 protection for consistent quality control across the workshop. The instrument’s 0–200 mm measuring range and 0.03 mm accuracy make it a pragmatic choice for everyday machine‑shop and inspection tasks; order directly via Metav Werkzeuge or contact their consultants for tailored advice. Digital caliper – Microtech Metrology, wireless, IP67 Digital caliper designed for standard workshop and laboratory measurement tasks with wireless data output and durable protection Wireless data transmission IP67 dust and water protection ISO 17025 calibration certificate included Measurement range 0–200 mm Reliable, traceable results for quality control A calibrated measuring instrument is the foundation of reproducible inspections. This digital caliper is supplied with an ISO 17025 calibration certificate, confirming traceability and permitting confident use in quality assurance routines. With a declared repeatability of 0.03 mm and a display resolution of 0.01 mm, the device supports typical workshop tolerances and sampling checks; the clearly readable Swiss Digit display (11 mm height) reduces misreading risks on the shop floor. These technical attributes translate into fewer rejected parts and more consistent process decisions. Built for everyday industrial use Engineered for the standard measurement class, the caliper covers the common 0–200 mm range that balances reach and rigidity for metalworking and assembly tasks. The IP67 rating protects electronics and sensing elements against dust and temporary immersion, enabling use at the machine centre or in damp production zones without compromising accuracy. The compact jaw length of 25 mm facilitates access into confined features, while the digital readout keeps handling straightforward—benefits that increase throughput and reduce handling errors. Integrating measurements into production workflows Wireless data output simplifies the transfer of values to inspection software and reduces manual transcription. Data transfer capability accelerates entry into statistical process control systems and lowers the risk of transcription errors during batch inspections. The large, high‑contrast Swiss Digit readout improves legibility in bright or low light, supporting faster decision cycles. Together, these features improve traceability and help maintain consistent documentation across production shifts. A pragmatic choice for workshops and laboratories As a member of the standard-length caliper category, this instrument provides the most commonly required measuring span while remaining easy to handle single‑handedly. The delivered ISO 17025 calibration certificate and the IP67 protection level make it suitable both for routine shop‑floor checks and for spot verification in controlled inspection areas. The wireless output and clear display lower the administrative burden of data capture, so inspection routines become more efficient and less error‑prone—benefits that contribute directly to production reliability and cost control. Contact Metav Werkzeuge to request the Microtech Metrology digital caliper with ISO 17025 certificate and wireless output for seamless integration into existing inspection processes Technical data Article number: 141430204 GTIN: 4061905459474 Manufacturer: Microtech Metrology IP rating: IP 67 Measurement range: 0–200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display: Swiss Digit 11 mm Data output: Wireless Calibration: ISO 17025 certificate included Core specifications Measurement range max: 200 mm Measurement range min: 0 mm Display resolution: 0.01 mm Declared accuracy: 0.03 mm Display height: 11 mm Jaw length: 25 mm Features and functions Digital caliper for external and internal measurements Wireless data transmission for streamlined logging Delivered with ISO 17025 calibration certificate Robust protection for industrial environments (IP67) Suitable for machine shop and inspection tasks FAQ Is the device supplied with a calibration certificate? Yes. The Microtech Metrology digital caliper (SKU 141430204) is delivered with an ISO 17025 calibration certificate. What measurement range and accuracy can be expected? The instrument covers 0–200 mm with a resolution of 0.01 mm and a declared accuracy of ±0.03 mm, suitable for standard workshop quality checks. Can measurements be recorded electronically? Yes. The caliper features wireless data output to simplify transfer of readings into inspection and SPC systems. Is the caliper suitable for shop‑floor use near machining operations? The IP67 rating protects the unit against dust and temporary immersion, making it robust enough for many production environments. How readable is the display in bright conditions? The Swiss Digit display with 11 mm high digits offers high contrast and clear legibility for quick readings. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Digital Precision Caliper Wireless Display 0.01mm Resolution IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of wireless data transfer, IP67 protection and an ISO 17025 calibration certificate for dependable, audit-ready workshop measurement. Order the Digital Caliper directly via Metav Werkzeuge or contact our consultants for integration advice. Microtech Metrology Digital Caliper 0–200 mm — Wireless data output & IP67 protection A Digital Caliper for standard workshop metrology and production control, offering wireless data transfer, a high-contrast Swiss Digit display and ISO 17025 traceable calibration. Wireless data transfer for seamless logging IP67 protection for washdown environments ISO 17025 calibrated with certificate included Consistent, verifiable measurements for routine quality control The instrument delivers a measuring range of 0–200 mm classified as the Standard workshop size, which balances reach and stiffness for everyday machining and inspection tasks. With a resolution of 0.01 mm and an operative accuracy of ±0.03 mm, the caliper suits dimensional checks where reproducible results and traceability matter. The Swiss Digit display (11 mm height) improves readability on the shop floor, reducing interpretation errors during rapid inspections. Explaining the figures: resolution indicates the smallest display step, while the stated accuracy defines the expected maximum deviation under normal use; together they permit confident pass/fail decisions in production control. Faster data capture and lower administrative effort Equipped with wireless data output, the device removes manual transcription and streamlines transfer to inspection software or spreadsheets, improving efficiency in batch reporting and SPC workflows. Integration reduces clerical errors and saves operator time, particularly where repeated measurements must be aggregated. The clear digital readout and wireless interface support modern traceability routines without complex retrofitting, making the caliper a practical tool for processors who require consistent data flow between the shop floor and the quality system. Built to withstand workshop conditions The caliper’s IP67 rating ensures protection against dust ingress and temporary immersion, which is valuable where coolant or cleaning procedures are routine. A 50 mm jaw length gives robust contact area for stable gripping of profiles and components. The measuring mechanism is specified with no applied measuring force, which helps to avoid deflection-sensitive errors on thin-walled parts. Together these characteristics reduce rework and downtime by keeping the measuring instrument operational in demanding environments. Traceable calibration and audit readiness Delivered fully ISO 17025 calibrated, the tool comes with a calibration certificate that documents traceability and measurement uncertainty for internal and external audits. This formal calibration simplifies acceptance into quality systems and supports supplier control or incoming inspection processes. For companies aiming to tighten process control, the certified state of the instrument provides a clear baseline for periodic recalibration and supports compliance with inspection protocols. For specification support, integration guidance or to request the ISO 17025 certificate with your order, contact Metav Werkzeuge — Metav’s technical advisors can confirm suitability, delivery and calibration options from Emmerich. Technical data Article number: 141230204 GTIN: 4061905457876 Brand: Microtech Metrology Product: Digital caliper Display: Swiss Digit, 11 mm height Data output: Wireless Protection class: IP67 Calibration: ISO 17025 certificate included Facts Measuring range: 0–200 mm Resolution (readout): 0.01 mm Accuracy: ±0.03 mm Jaw length: 50 mm Readout height: 11 mm Protection rating: IP67 Special features Wireless data transmission for direct logging ISO 17025-calibrated; certificate supplied Standard class (0–200 mm) for workshop use No applied measuring force for delicate parts Robust, high-contrast Swiss Digit display FAQ Is this caliper suitable for general machine-shop use? Yes. The Microtech Metrology Digital Caliper (0–200 mm, SKU 141230204) is classified as a Standard-range instrument and is suitable for typical machine-shop and metalworking measurement tasks that require routine dimensional checks. What precision can be expected in daily use? The caliper provides a display resolution of 0.01 mm and an operational accuracy of ±0.03 mm, which supports reliable measurement and pass/fail decisions on production parts when used under normal workshop conditions. Does the delivery include calibration documentation? Yes. The instrument is delivered fully calibrated according to ISO 17025 and includes the calibration certificate, enabling immediate use in audit-traceable inspection processes. Can measurement data be exported directly to quality software? Yes. The wireless data output allows direct transfer of readings to compatible data-collection systems and avoids manual entry, improving reporting speed and reducing transcription errors. Is the caliper protected against coolant and dust? The device is rated IP67, giving protection against dust ingress and temporary immersion, which makes it suitable for environments where cleaning or coolant contact may occur. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Digital Precision Caliper With 5mm Bore, 7 Pair Preset Inserts, Stainless Steel, Digital Display, Delivered In Case - Metav IndustryLine
Take advantage of the combination of workshop-ready robustness, precise 0.01 mm readout and practical preset functionality for reliable inspection routines; order directly via Metav Werkzeuge or consult the specialists for integration advice. Digital-Uni MS200 digital caliper (INOX) – 200 mm range, Bore Ø5 mm The Digital-Uni MS200 is a compact digital caliper for standard workshop and inspection tasks, offering a 200 mm measuring range with a clear digital readout and a mounting bore for interchangeable measuring inserts. Digital display with ON/OFF and preset 200 mm measuring range, 0.01 mm resolution Metal housing (INOX) for workshop use Includes 7 pairs of measuring inserts Accurate results for everyday quality control The 200 mm range positions this instrument in the standard caliper class, balancing reach and stiffness for typical machine‑shop and metalworking tasks. With a 0.01 mm resolution on the digital display, the device supports fast, reproducible checks that reduce rework and speed throughput. The compact jaw geometry and an 85 mm jaw length make single‑handed operation straightforward while preserving measurement stability; this combination translates into fewer adjustments during serial inspection and a more efficient process chain. Practical data handling and preset convenience Equipped with an RB 5 data output, the caliper can be integrated into data collection workflows, enabling traceable measurement records and simple logging into inspection software. The electronics are operated via ON/OFF and SET/PRESET controls, which allow quick zeroing and predefined offsets for specific gauges or fixtures. Powered by a 3 V supply, the measuring system maintains a stable display and predictable behaviour over typical shift cycles, supporting rational measurement workflows and faster decision making on the shop floor. Built for workshop use and immediate readiness A metal housing (INOX) gives the instrument the mechanical resilience needed in industrial environments, while the delivery includes 7 pairs of measuring inserts and a bore Ø5 mm for fixture mounting, so the caliper is ready for specialised gauging tasks straight away. The tool is supplied in a protective transport case, simplifying storage and reducing the risk of transit damage. These practical features combine to offer a dependable instrument that reduces downtime and provides reliable tactile feedback during routine inspection. Contact Metav Werkzeuge for bespoke advice on integrating the Metav IndustryLine Digital-Uni MS200 into existing inspection setups and secure delivery from Emmerich to the workshop bench Technical Data Article number: M240.208.N GTIN: 4054469160023 eClass: 21170344 Customs tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution (display): 0.01 mm Jaw length: 85 mm Weight: 0.55 kg Supply voltage: 3 V Special features Metal housing (INOX) Bore Ø5 mm for measuring inserts Includes 7 pairs of measuring inserts Digital display with ON/OFF and SET/PRESET RB 5 data output for measurement logging Delivered in protective transport case Factory standard (Werksnorm) FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 0–200 mm, making it suitable for standard workshop and machine‑shop measurements. What measurement resolution and repeatability are provided? The instrument offers a 0.01 mm display resolution, providing clear numeric steps for routine inspection and quality checks. Are measuring inserts supplied and how are they mounted? Yes, the delivery includes 7 pairs of measuring inserts; the device features a bore Ø5 mm for secure mounting of these inserts. Can measurement data be exported for documentation? The caliper is fitted with an RB 5 data output, enabling connection to data loggers or inspection software for traceable records. Is the caliper ready for workshop use out of the box? The caliper arrives in a protective transport case with measuring inserts installed and the digital readout configured for immediate use under factory standard settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Precision Caliper With LCD Colour Display, mm/inch, Rechargeable Lithium, IP67, Delivered In Case - Filetta
Take advantage of a rugged, workshop-ready digital caliper that combines an IP67 ingress rating with a 0–200 mm measuring range and reliable 0.03 mm accuracy for consistent production checks; Order the MS910.472 directly via Metav Werkzeuge or ask our consultants if needed. Filetta MS910.472 Digital Caliper — IP67, 0–200 mm The MS910.472 is a digital caliper engineered for industrial and workshop measurement tasks, pairing robust environmental protection with a colour LCD and practical tolerance functions for fast pass/fail inspection. IP67 dust- and water-resistant 0.03 mm accuracy for precise checks Colour LCD with day/night and tolerance Rechargeable lithium battery included Robust design for repeatable workshop measurement This digital instrument is built around an IP67 enclosure and a 0–200 mm scale, making it a solid fit for the Standard caliper class used across machining and metalwork. The sealed construction reduces contamination-related drift and allows measurements at the machine bench where cutting fluids or fine dust are present. Combined with a locking screw and a thumb drive wheel, the design supports stable jaws and reproducible clamping, helping to cut down on rework and inspection time while preserving measurement integrity. Clear readings and intuitive controls to speed up inspection A bright colour LCD with day/night modes and a dedicated tolerance function puts pass/fail information immediately at eye level, improving throughput on repetitive checks. The display offers mm/inch switching and ABS/INC modes with a reset key for quick zeroing at any reference point. The rechargeable lithium battery reduces downtime from cell changes and supports steady power for long shifts, while the smooth drive wheel and locking screw enable single-handed operation and secure clamping for complex set-ups. Accuracy and resolution that support quality assurance With a display resolution of 0.01 mm and an asserted accuracy ±0.03 mm, the caliper aligns with standard digital caliper expectations for ranges up to 300 mm and is appropriate for routine quality-control tasks in production environments. The built-in depth gauge extends functionality to depth measurements without extra tools, allowing the instrument to serve multiple roles at the inspection station and simplifying workflow by reducing instrument changes between steps. Choose the Filetta MS910.472 for robust, tested IP67 measurements and contact Metav Werkzeuge for personalised advice and reliable delivery from Emmerich to your workshop. Technical Data Article number: MS910.472 Product: Digital caliper Brand: Filetta Facts Measuring range: 0–200 mm Resolution: 0.01 mm Accuracy: 0.03 mm IP protection: IP67 Special features Colour LCD with day/night mode and tolerance function Display functions: mm/inch, On/Off, ABS/INC, Reset Power: Lithium rechargeable battery Drive wheel (thumb wheel) for fine adjustment Locking screw for repeatable measurements Depth gauge integrated Classification: Standard (100–300 mm) FAQ Is this caliper suitable for use near coolant or in dusty environments? The Filetta MS910.472 digital caliper carries an IP67 rating, so the instrument is dust-tight and protected against immersion, making it suitable for use at the machine bench where liquids or dust are present. What display information is available for quick tolerance checks? The caliper’s colour LCD includes a tolerance function and day/night modes; the MS910.472 shows immediate pass/fail status to speed up repetitive inspections. How precise is the measurement and what is the display resolution? The instrument provides a display resolution of 0.01 mm and an accuracy of 0.03 mm, which is consistent with standard digital calipers used for workshop quality control. Does the caliper include depth measurement capability? Yes, the MS910.472 integrates a depth gauge so depths can be measured without changing tools, supporting versatile inspection tasks. How is the caliper powered and how is downtime minimised? Power is provided by a rechargeable lithium battery; this reduces the need for disposable cells and helps maintain uptime during extended use. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
200mm Digital Precision Caliper With Preset, Stainless Steel, 0.01mm Resolution, Plastic Case - Metav IndustryLine
Combining 0.01 mm resolution, a 200 mm measuring range and a robust stainless, hardened construction, this digital caliper delivers reliable workshop inspections and consistent shop-floor results; order directly via Metav Werkzeuge or consult our technical advisors for bespoke application advice. Digital universal caliper M240.201.N — 200 mm digital caliper with preset, Metav IndustryLine Digital universal caliper M240.201.N is a compact digital caliper designed for general workshop and inspection work, enabling inside, outside, depth and step measurements with a clear preset function for repeatable checks. Stainless, hardened metal housing 200 mm measuring range Digital display with preset function Measuring inserts mountable top and bottom Dependable measurements in the standard workshop range This caliper is classified in the standard range for workshop use thanks to its 200 mm reach, striking a balance between measuring span and rigidity. The length is suitable for everyday tasks in machining and metalworking where reach and one‑hand operation matter. The solid profile and hardened construction reduce flexing during use, which supports reproducible results when inspecting components, fixtures or assemblies. The design therefore helps maintain throughput without sacrificing the core measurement quality required on the shop floor. Fast numeric readout and preset for repeatable inspection Equipped with a clear digital display and SET/PRESET control alongside an ON/OFF function, the instrument provides a 0.01 mm resolution that aligns with common digital caliper standards. This level of display resolution allows quick identification of dimensional deviations during routine checks and incoming inspection. The presence of a preset mode simplifies repetitive tasks by establishing a reference value, reducing cycle time for batch checks. A dedicated RB 5 data output enables connection to external data capture or SPC systems for documentation and traceability. Built for durability and corrosion resistance Constructed from stainless steel that has been hardened and fitted with a metal housing, the caliper resists the wear and environmental exposure typical of workshop conditions. The corrosion-resistant surfaces extend service life and reduce the frequency of replacement tools, supporting a lower total cost of ownership in production environments. The unit conforms to factory standards as specified by the manufacturer, reflecting consistent production quality and material selection geared to everyday industrial use. Versatile jaw arrangement and practical handling features The caliper’s measuring inserts can be mounted both at the top and the bottom, increasing flexibility for inside, outside and bore spacing tasks and easing access in confined geometries. A jaw length of 20 mm gives secure contact for a variety of features without compromising access to narrow slots. Powered by a 3 V system that keeps electronics simple and economical, the instrument’s balanced mass lends steady handling during measurements. Together these traits make it a practical choice for quality control benches and multi‑purpose workshop routines. For dependable, repeatable shop measurements choose the Metav IndustryLine digital caliper — contact Metav Werkzeuge in Emmerich for application guidance at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: M240.201.N GTIN: 4054469159973 Label: Digital-Uni-Messschieber 200 mm, 3 V mit Preset, INOX, Werksnorm Manufacturer: Metav IndustryLine Weight: 1.25 kg Facts Measuring range: 0–200 mm Resolution: 0.01 mm Jaw length: 20 mm Power supply: 3 V Customs tariff number: 90173000 eClass: 21170344 Special features Material: stainless steel, hardened, metal housing Digital display with ON/OFF and SET/PRESET buttons Preset function Data output: RB 5 Measuring inserts mountable top and bottom Factory standard (Werksnorm) FAQ How precise is the instrument for workshop measurements? The caliper provides a display resolution of 0.01 mm, which is typical for digital calipers used in machine shops and quality control; this makes the device suitable for routine dimensional checks and process control. What types of measurements are possible with this caliper? Inside, outside, depth and step measurements are supported, and the option to mount measuring inserts top or bottom increases accessibility for bore and wall‑thickness checks. Is the caliper suitable for regular workshop use? Yes; the stainless, hardened material and metal housing are chosen for durability under shop conditions, making the tool appropriate for daily inspection tasks. Can measurement data be exported for documentation? The unit includes an RB 5 data output that allows integration with external data capture or SPC systems, subject to interface compatibility with the receiving equipment. What does the factory standard delivery include? Delivery follows the manufacturer’s works standard and comprises the digital caliper ready for use with its preset and display functions as described. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Caliper For Pipe Wall Thickness Measurement Color 1.5" Touchscreen, IP54 - Microtech Metrology
Take advantage of precise, traceable calibration together with reliable workshop connectivity and robust protection for daily inspection tasks. The combination of ISO 17025 certification, Wireless+USB data output and IP54 protection ensures reproducible results and seamless data transfer. Order directly via Metav Werkzeuge or consult our specialists for integration advice. Digital Caliper — Colour 1.5″ touchscreen · Wireless + USB (Microtech Metrology) Digital Caliper designed for standard workshop and quality-control measurements up to 0–200 mm, combining high resolution with shop‑floor durability Colour 1.5″ touch display Wireless + USB data output ISO 17025 calibrated with certificate IP54 dust and splash protection Traceable accuracy for reliable inspection results Delivered fully calibrated to ISO 17025, this digital caliper provides a measurable basis for quality procedures and audit trails. The instrument offers a resolution of 0.005 mm, which supports finer discrimination than common 0.01 mm displays, and comes with a calibration certificate for every unit. For process-oriented workshops and inspection benches, that traceability reduces uncertainty and documents conformity to measurement procedures. Fast data capture to reduce documentation time Equipped with Wireless+USB connectivity and a Colour 1.5″ touchscreen, the caliper accelerates transfer of recorded values into inspection software or spreadsheets. The combination of tactile display and direct data output eliminates repeated manual entries and minimises transcription errors, improving throughput in serial inspection or sample-based quality checks. Integration into existing data collection routines becomes straightforward, supporting efficient batch documentation and traceable logs. Built for everyday use in industrial environments Classified as a Standard caliper (0–200 mm), the unit balances reach and stiffness for most machine‑shop and metalworking tasks, making it a practical workshop mainstay. The IP54 rating provides protection against dust ingress and splashing, while the specified measurement force 1–20 N and a jaw length of 50 mm ensure reliable contact and handling during common external and depth measurements. Robust design choices cut downtime and protect measurement integrity on the shop floor. Practical handling that supports consistent results User-friendly ergonomics, a clear colour display and the combination of tactile controls with wireless transmission help standardise routine measurements. The device reduces operator variability by supporting repeatable contact behaviour within the specified force range and by producing instantly transferable readings. The result is fewer retests, more consistent data for statistical process control and a clearer audit trail for quality assurance. Contact Metav Werkzeuge today for certified measuring tools from Microtech Metrology and expert advice on integrating this digital caliper into inspection routines Technical data Article number: 141230207 Manufacturer: Microtech Metrology GTIN: 4061905037559 eClass: 21170344 Facts Measuring range: 0–200 mm Resolution: 0.005 mm Measurement force: 1–20 N Jaw length: 50 mm Display size: Colour 1.5″ touchscreen Protection class: IP54 Special features Digital caliper Data output: Wireless + USB Classification: Standard caliper (0–200 mm) Delivered with ISO 17025 calibration certificate FAQ Is the caliper supplied with a calibration certificate? Yes. The Digital Caliper from Microtech Metrology (SKU 141230207) is delivered fully calibrated to ISO 17025 and includes the corresponding calibration certificate. What type of data output is available for integration with inspection systems? The instrument offers Wireless+USB data output to facilitate direct transfer of measured values into inspection software or spreadsheets. How durable is the caliper for workshop use? With an IP54 rating and a robust construction suited to the Standard 0–200 mm class, this caliper withstands typical shop‑floor conditions involving dust and occasional splashes. Can the device achieve measurements finer than standard 0.01 mm calipers? The caliper provides a resolution of 0.005 mm, enabling finer discrimination than many typical digital instruments and supporting tighter inspection tolerances. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2020mm Digital Precision Caliper For Bore Centre Distances With Ø20/Ø35 Cones, IP67, ISO 17025 Calibrated - Microtech Metrology
The combination of an extra‑long 20–2020 mm measuring range, robust IP67 protection and ISO 17025 calibration certificate makes this instrument a reliable choice for large‑format measurement tasks; order directly via Metav Werkzeuge or consult our specialists for specification matching. Microtech Metrology digital caliper — 20–2020 mm, IP67 protection The digital caliper from Microtech Metrology is a long‑range measuring instrument designed for large components and workshop environments, combining wide reach with shop‑floor durability and traceable calibration ISO 17025 calibrated with certificate included Measurement range 20–2020 mm for large parts IP67 dust and water protection for harsh environments Swiss Digit display, 11 mm digit height for high legibility Traceable accuracy for large components Designed for applications where repeatable, documented measurements matter, this instrument is delivered fully ISO 17025 calibrated with a calibration certificate, providing traceability for quality control and auditing. The device reads in steps of 0.01 mm while the specified accuracy is ±0.06 mm, so it is especially suited to workshop and production inspection tasks where long travel and documented conformity are priorities rather than sub‑micron laboratory measurement. The 20–2020 mm span places the caliper in the extra‑long category, allowing measurements of housings, fixtures and large assemblies without transfer errors from multiple shorter instruments. Built for the workshop — robust, visible, reliable A tough design with IP67 ingress protection keeps the electronics and sliding system operational in coolant, chips and dusty conditions, reducing downtime for routine cleaning. The Swiss Digit display with an 11 mm digit height ensures quick, unambiguous readouts on the shop floor, which speeds up inspection cycles and reduces transcription errors. The digital electronics and clear numerals support rapid decision‑making, improving throughput in measuring stations and incoming inspection while maintaining documented measurement integrity. Practical handling and accessories that save time The instrument comes supplied with two measuring cones (Ø20 mm and Ø35 mm) to simplify bore and depth checks on large diameters, eliminating the need for improvised adapters. The long hardened beam maintains sufficient stiffness across its travel to keep deflection low; combined with the device’s calibration, this reduces measurement uncertainty for long‑span checks. Metav’s distribution and quality filter in Emmerich ensure consistent availability and a verified quality level, reflecting a commitment to making precision tools accessible across industry and trade. For ISO 17025‑traceable measurements with the Microtech Metrology digital caliper, contact Metav Werkzeuge in Emmerich for delivery options and specification advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141732013 GTIN: 4061905452574 Manufacturer: Microtech Metrology Core technical data Measurement range: 20–2020 mm Maximum measuring length: 2020 mm Resolution: 0.01 mm Stated accuracy: ±0.06 mm Display: Swiss Digit, 11 mm digit height Protection class: IP67 Special features Delivered calibrated to ISO 17025 with certificate Digital operation for rapid readout and recording Includes measuring cones Ø20 mm and Ø35 mm Long‑range design suitable for large components and assemblies FAQ What measurement range does the caliper cover? The Microtech Metrology digital caliper covers a measuring range of 20–2020 mm, enabling direct inspection of large parts without the need to piece measurements together. Is the instrument delivered calibrated? Yes. The digital caliper from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the calibration certificate with delivery. What resolution and accuracy can be expected? The instrument provides a resolution of 0.01 mm with a stated accuracy of ±0.06 mm, suitable for production and workshop inspection of large components. Which environments is the caliper suited for? With IP67 protection, the caliper is appropriate for shop‑floor conditions involving coolant splashes, chips or dust, while the robust beam supports repeatable long‑span measurements. What accessories are included for specific measurements? The delivery includes measuring cones Ø20 mm and Ø35 mm, allowing simplified bore and depth checks on larger diameters without separate adapters. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20mm Tapered Measuring Cone, Offset 300mm, b50 a112 - Metav IndustryLine
Take advantage of precise alignment and repeatable positioning thanks to the combination of a 20 mm cone tip and compact geometry (b = 50 mm, a = 112 mm), which speeds up fixture set-up and reduces measurement variation. Order the measuring cone directly via Metav Werkzeuge or consult the product specialists for compatibility advice. Measuring cone 20 mm for 240.293 — precision cone for fixture alignment (Metav IndustryLine) The measuring cone 20 mm for 240.293 is a dedicated alignment accessory designed to work with the M240.293 measuring fixture; it provides a defined contact point for repeatable positioning in systems with a 300 mm hole spacing. 20 mm cone diameter for defined contact Compatible with M240.293 measuring system Lightweight construction for simple handling Faster, repeatable set-ups through defined contact geometry The conical tip with a 20 mm diameter establishes a precise contact interface that reduces positional ambiguity when locating holes or reference points on a fixture. Matched to the M240.293 system and its hole spacing of 300 mm, the shaped contact reduces re‑clamping time and supports consistent measurement chains. This mechanical definition translates into fewer alignment iterations and a lower risk of cumulative error in production or inspection workflows, improving throughput in metrology‑driven applications. Compact form and ergonomic handling for workshop use With segment dimensions of b = 50 mm and a = 112 mm, the accessory remains compact while offering sufficient reach for many fixture geometries. The low mass (approx. 0.2 kg) makes handling straightforward during frequent set‑up changes and minimises the effect of operator fatigue on process speed. The concise dimensions are particularly suitable where a clear datum point is required without adding excessive overhang or leverage that could affect stability during measurement. Practical applications and integration with inspection processes Designed as an accessory for bench and fixture metrology, the cone supports reliable centring and reference establishment for both component set‑up and follow‑up inspection. The defined geometry aids optical or tactile measurement systems by providing a consistent mechanical reference, which helps to reduce scatter between successive readings. Integration with standard measuring rigs is simplified by the explicit compatibility with the M240.293 designation and the matching 300 mm hole pattern, enabling smooth incorporation into established inspection procedures. For assured compatibility and supply of Metav IndustryLine accessories, contact Metav Werkzeuge to request the M240.293.A measuring cone or advice on fixture integration; consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.293.A GTIN: 4061905053801 Label: Messkegel 20 mm for 240.293 (Bohrabstand‑MS 300 mm) Facts Cone diameter: 20 mm Length a: 112 mm Length b: 50 mm Weight: 0.2 kg Hole spacing (MS): 300 mm Special features Compatible with M240.293 measuring system Defined contact geometry for repeatable positioning Compact design for workshop and fixture use FAQ What is the primary purpose of this measuring cone? The measuring cone provides a defined contact point for repeatable positioning and alignment within M240.293‑based fixtures, helping to reduce setup time and measurement variation. Is the cone compatible with existing M240.293 fixtures? Yes, the cone is listed for use with the M240.293 measuring system and matches the 300 mm hole spacing specified for that fixture family. What are the physical dimensions and weight of the cone? The cone features a 20 mm tip diameter with segment lengths of 50 mm and 112 mm respectively and weighs approximately 0.2 kg. Can this accessory improve throughput in inspection routines? When used as a defined mechanical reference in a metrology set‑up, the cone contributes to faster, more repeatable set‑ups and can reduce the need for repeated adjustments during inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
210mm Digital Precision Caliper Colour Touchscreen Wireless/USB IP54, ISO 17025 Calibrated - Microtech Metrology
Benefit from traceable accuracy and fast data capture: the combination of ISO 17025 calibration, 0.005 mm resolution and Wireless+USB connectivity delivers consistent measurement results and efficient documentation. Order the Messschieber directly via Metav Werkzeuge or ask our consultants for tailored advice. Messschieber Digital Caliper — 1.5" colour touchscreen, Wireless+USB (Microtech Metrology) The Messschieber is a digital precision caliper for workshop and quality control use, covering a 10–210 mm measuring range and designed for repeatable dimensional checks in machining and inspection tasks. ISO 17025-calibrated delivery Wireless and USB data output 1.5" colour touchscreen display IP54 dust and splash protection Fast, reliable data capture for modern inspection workflows The instrument combines a 1.5" colour touchscreen with Wireless+USB data transfer to simplify documentation and reduce transcription errors. The visual display accelerates read‑out in busy environments, while digital export supports inspection software and SPC systems. With IP54 protection, the unit tolerates workshop dust and incidental splashes, keeping data capture reliable even at the machine bench. These connectivity features translate directly into time savings during set‑up and measurement logging. Traceable precision that supports quality management Calibrated and supplied with a certificate according to ISO 17025, this digital caliper meets the traceability demands of accredited laboratories and in‑house quality systems. The device offers a 0.005 mm display step, improving resolution for fine measurements and enabling tighter control over tolerances than standard 0.01 mm instruments. Classified in the standard size class for calipers, the 10–210 mm range is ideal for routine workshop checks where reach, rigidity and ergonomic handling must balance. Practical design that eases everyday measuring tasks Measured contact force is specified at 1–20 N, which helps maintain consistent measuring pressure and reduces operator‑dependent variation. The digital interface and compact jaws make the tool suitable for common external, internal and step measurements found in production and maintenance. Built for workshop use, the instrument combines robust protection, intuitive controls and direct data links so that measurement routines become faster and less error‑prone — a pragmatic choice for machine shops and inspection benches that require dependable repeatability. For traceable workshop precision and smooth data integration, contact Metav Werkzeuge in Emmerich to request the Microtech Metrology digital caliper with ISO 17025 calibration and Wireless+USB output: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 141730207 GTIN: 4061905037047 Manufacturer: Microtech Metrology Facts Measuring range: 10–210 mm Resolution / display step: 0.005 mm Measuring force: 1–20 N Protection class: IP54 Display: Colour 1.5" touchscreen Data output: Wireless+USB Calibration: ISO 17025 certificate included Special features Digital caliper design Workshop‑proof housing Suitable for external, internal and step measurements Designed for QC and production use FAQ What measuring range does the caliper cover? The caliper covers a 10–210 mm range, placing it in the standard class for workshop and machine‑building inspections. Is a calibration certificate supplied? Yes, the instrument is delivered fully calibrated with an ISO 17025 calibration certificate from Microtech Metrology. How is measurement data transferred to a PC? Data can be exported via Wireless+USB interfaces, enabling direct capture into inspection software or SPC systems. What resolution and accuracy can be expected? The display step is 0.005 mm, offering finer read‑out than common 0.01 mm instruments and supporting tighter tolerance checks. Can the caliper be used in a production environment? Yes, with IP54 protection and a rugged digital design the caliper is suited to workshop conditions and regular production use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
210mm Digital Precision Caliper For Bore Pitch Measurement Swiss Digital Display IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high shop-floor reliability and traceable laboratory calibration: this digital precision caliper combines robust IP67 protection with an ISO 17025 calibration certificate for consistent results and documented traceability. Order the instrument via Metav Werkzeuge or contact their consultants for application advice and certification details. Microtech Metrology Precision Caliper 10–210 mm — Digital, IP67, ISO 17025-calibrated The Precision Caliper 10–210 mm is a digital measuring instrument for machine‑shop and quality‑control tasks, combining a clear Swiss digital readout with rugged dust‑ and water‑resistance for repeatable measurements in production environments. Digital readout Swiss 11 mm high IP67 protection for coolant and dust ISO 17025 calibration certificate included Hand-finished measuring jaws Traceable accuracy and certified measurement results Calibrated to ISO 17025, this instrument delivers documented traceability suitable for internal quality control and incoming inspection. The electronic readout offers a 0.01 mm resolution, ensuring that measurements are presented clearly and consistently; the included calibration certificate records the reference conditions and results. Such certification supports audit trails and reduces uncertainty when measurements are used for production decisions or delivered with parts. Rugged build designed for industrial use With IP67 protection and a self‑lubricating slide, the caliper tolerates typical shop‑floor influences such as coolant, chips and dust without losing performance. Hand‑finished measuring jaws provide refined contact geometry for reliable seating on workpieces, and the construction focuses on stiffness and wear resistance to prolong service life. Classified in the Standard measuring range (max 100–300 mm), the instrument balances reach and rigidity for everyday tasks in metalworking and toolrooms. Fast, readable measurements for efficient workflows The Swiss Digital display (11 mm digit height) promotes fast reading under workshop lighting and speeds up inspection cycles. Covering 10–210 mm, the instrument suits common applications from small components to larger assemblies without switching tools, reducing handling time. Ergonomic slide control and a compact jaw profile enable single‑hand operation and reliable repeatability, supporting higher throughput in production and inspection routines. For application support, specification matching and to obtain the ISO 17025 documentation for the Microtech Metrology Precision Caliper 10–210 mm, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: 141730203 GTIN: 4061905036798 Manufacturer: Microtech Metrology Display: Swiss Digital, height 11 mm Core specifications Measuring range: 10–210 mm Resolution: 0.01 mm Protection class: IP67 Calibration: ISO 17025 Special features Hand-finished measuring jaws Self-lubricating slide Measurement range classification: Standard (max 100–300 mm) Digital electronics suitable for shop‑floor use Delivered with calibration certificate FAQ What accuracy and resolution does the Precision Caliper 10–210 mm offer? The Precision Caliper 10–210 mm provides a display resolution of 0.01 mm and is delivered with an ISO 17025 calibration certificate to ensure traceability and documented measurement conditions. Is the Precision Caliper 10–210 mm suitable for workshop conditions? Yes. The Precision Caliper 10–210 mm features IP67 protection and a self‑lubricating slide, designed to withstand dust and coolant exposure common in machine shops. Does the instrument arrive with a calibration certificate? Delivery of the Precision Caliper 10–210 mm includes an ISO 17025 calibration certificate, confirming the device has been calibrated under laboratory conditions and providing documented traceability. Which measurement tasks is the Precision Caliper 10–210 mm intended for? The Precision Caliper 10–210 mm is intended for routine shop and inspection measurements within its 10–210 mm range and is classified in the Standard category for machine‑shop and metal‑fabrication use. How readable is the display under typical lighting? The Precision Caliper 10–210 mm uses a Swiss Digital display with 11 mm high digits for improved legibility on the shop floor and in inspection areas. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
22-200mm Internal Caliper Sharp Jaws Microcomputer Display Wireless USB IP54 - Microtech Metrology
The combination of dependable precision, robust data transfer and workshop suitability ensures consistent internal measurements and fewer reworks; ideal for standard machine‑shop tasks. Order the instrument directly via Metav Werkzeuge or ask the consultants if further specification is required. Internal digital caliper — Microtech Metrology, 22–200 mm, Wireless + USB The Internal digital caliper is a workshop‑grade measuring instrument for reliable internal measurements in machining and quality control applications. *Colour 1.54" digital display *Wireless and USB data output *IP54 splash‑resistant protection *Accuracy ±0.03 mm for dependable checks *Measuring range 22–200 mm standard class Faster decisions through measurable accuracy A focus on measurable performance means the device delivers repeatable results that speed inspection cycles and reduce costly rework. The instrument offers ±0.03 mm accuracy, which is appropriate for standard quality control scenarios in metalworking and tooling. Calibrated procedures in the production chain benefit from a consistent tolerance band, and the clear 1.54" colour display presents readings with minimal interpretation time. By combining a precise sensor package with straightforward readout, the tool shortens inspection throughput without sacrificing traceability. Built for standard workshop tasks and extended reach With a measuring range of 22–200 mm, this tool falls into the standard category for calipers, providing an effective balance between reach and rigidity for everyday machining tasks. Those lengths are typically the workshop backbone for components, fixtures and assemblies where single‑hand operation and firm guidance are advantageous. The measuring span covers common internal diameters and bores encountered in engineering workshops, making the caliper a practical choice for maintenance, bench metrology and small‑batch production checks. Seamless data capture for quality workflows Data transfer is implemented via wireless and USB outputs, enabling direct collection into inspection software or spreadsheets and reducing transcription errors during logging. The digital interface, paired with the colour display, supports quicker verification and simplifies digital record keeping for traceability. For environments that demand documentation of measurement results, the device integrates with typical data‑capture routines, helping to maintain audit trails and expedite reporting. Durable design that suits the shop environment Engineered for the realities of everyday use, the instrument carries IP54 protection against dust ingress and splash water, so it withstands common workshop conditions. The construction supports reliable jaw alignment and stable sliding action, which helps maintain accuracy across repeated measurements. Ergonomic considerations in the slide and thumb‑rest reduce operator variation, contributing to more reproducible readings and a lower rate of measurement‑related rework. Choose Microtech Metrology's internal digital caliper for dependable in‑process measurements and rely on Metav Werkzeuge in Emmerich for fast supply and practical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141210207 GTIN: 4061905457661 Manufacturer: Microtech Metrology eClass: 21170344 Facts Measuring range: 22–200 mm Resolution / reading: 0.005 mm Accuracy: ±0.03 mm Display: Colour 1.54" Protection class: IP54 Special features Digital device with wireless and USB data output Classification: Standard (measuring range up to 300 mm) Intended for internal measurements and workshop inspection Suitable for machine‑shop quality control workflows FAQ What measuring range does the instrument cover? The instrument covers a measuring range of 22–200 mm, making it suitable for standard workshop internal measurements. What accuracy and resolution can be expected? Accuracy is specified at ±0.03 mm with a resolution / reading increment of 0.005 mm for fine indication of changes during inspection. How can measurement data be exported? Data export is available via wireless connection and USB, enabling direct capture of readings into inspection systems or spreadsheets. Is the caliper protected for workshop environments? Yes, the device carries an IP54 rating, offering splash resistance and protection against dust typical in machining areas. Which applications suit this caliper best? This instrument is aimed at internal diameter checks, inspection of bores and routine machining quality control tasks within a standard workshop setting. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
22-200mm Internal Digital Caliper Digital Display 13mm, IP54, USB Connection - Microtech Metrology
Take advantage of robust IP54 protection, a clear 13 mm digital display and reliable USB data output to document internal dimensions from 22 to 200 mm with workshop-grade accuracy; order the Internal Caliper directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology Internal Caliper — Digital internal measuring caliper, 22–200 mm, USB The Microtech Metrology Internal Caliper is a purpose-built digital instrument for fast, repeatable internal measurements in machine shops and inspection benches. Digital display 13 mm for clear readout USB data output for traceable results IP54 splash and dust protection Accuracy ±0.03 mm for workshop control Precise, repeatable internal measurement for everyday quality control This instrument covers a measuring range of 22–200 mm, which places it in the standard range best suited to everyday tasks in metalworking and machine construction. The specified accuracy of ±0.03 mm supports routine quality checks and dimensional control on components such as bore diameters, recesses and fitted housings. The digital readout offers a high-contrast 13 mm display, reducing interpretation errors and speeding up measurement cycles. Together, these characteristics deliver a dependable balance of reach and rigidity for workshop environments where reproducible results matter. Efficient data handling and durable construction for traceability Equipped with a USB data output, the caliper streamlines transfer of measured values to inspection software and spreadsheets, supporting documentation and process traceability without manual re-entry. The IP54 rating protects against dust ingress and splashes, extending service life under workshop conditions. These practical features reduce administrative overhead and help integrate measurement routines into production control systems, making digitised record-keeping straightforward and reliable. Ergonomic form and application-focused design The instrument’s jaw geometry and a 100 mm beak length enable comfortable access to internal features while maintaining stable contact points. The tool is optimised for internal measurement tasks — including small bores, grooves and stepped recesses — and its 0.01 mm readability supports fine adjustment and decision-making in assembly and inspection. Lightweight handling and a clear layout contribute to efficient measurement cycles and reduced operator fatigue during repetitive inspections. For tailored advice on integrating this Microtech Metrology digital internal caliper into inspection routines or for procurement from Metav Werkzeuge in Emmerich, please contact our specialists via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: 141210200 GTIN: 4061905082054 Manufacturer: Microtech Metrology ECLASS: 21170344 Facts Measuring range: 22–200 mm Readability: 0.01 mm Accuracy: ±0.03 mm Display height: 13 mm Jaw/beak length: 100 mm Protection class: IP54 Data output: USB Special features Digital internal caliper USB data interface for export Workshop-suitable protection (IP54) Standard-range instrument for machine and metalworking FAQ Is the caliper suitable for bore and groove measurements? Yes. The internal caliper is designed for internal dimensions such as bores, grooves and stepped recesses across its 22–200 mm range. How is measurement data transferred from the instrument? Measurement values are exported via the built-in USB data output to inspection software or spreadsheets for traceable records. What accuracy and resolution can be expected? The instrument provides a readability of 0.01 mm and an accuracy of ±0.03 mm, appropriate for standard workshop quality control. Does the instrument tolerate workshop conditions such as splashes and dust? The caliper carries an IP54 protection rating, offering resistance against dust ingress and splashing water typical in workshop environments. Which SKU should be quoted when ordering or requesting spare parts? Quote SKU 141210200 when enquiring about this digital internal caliper or ordering accessories. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
22-200mm Internal Digital Caliper Swiss Digit 11mm Display Wireless, IP67 - Microtech Metrology
Take advantage of a rugged, IP67‑rated design combined with wireless data transfer and a clear Swiss Digit 11 mm display to speed up inspection routines and reduce documentation errors; the device’s ±0.03 mm accuracy and 22–200 mm measuring span make it an efficient choice for standard workshop tasks — order via Metav Werkzeuge or contact the advisers in Emmerich for tailored advice. Internal Digital Caliper — IP67, wireless data output Internal Digital Caliper is a compact, shop‑ready measuring instrument for internal and external checks across standard workshop components, ideal for assembly benches and quality control stations. Wireless data output for seamless logging IP67 dust and water protection Swiss Digit 11 mm high-contrast display Accuracy ±0.03 mm for reliable checks Dependable precision for everyday quality control The caliper is designed for routine measurement tasks that demand consistent results: with a measuring range of 22–200 mm it falls into the standard category, offering the best balance between reach and rigidity for general engineering and metalworking applications. The instrument’s ±0.03 mm specification delivers trustworthy repeatability for inspection work, reducing the need for secondary verification. For operators unfamiliar with the term, the accuracy figure indicates the maximum deviation expected under defined conditions, which translates into predictable part tolerances and fewer rejects on the production line. This reliability supports faster decision‑making at first article inspection and in-process checks. Faster data capture and clearer readings to improve throughput Equipped with a Swiss Digit 11 mm display and wireless data transmission, the caliper reduces manual logging and visual strain during extended measuring sessions. The tall, high‑contrast digits mean measurements can be read at a glance on the workshop floor, while wireless output allows direct transfer into inspection software or spreadsheets, cutting transcription time and human error. Integrating electronic measurement into documented workflows streamlines traceability: recorded values can be linked to batch numbers and inspection records without extra steps, improving documentation efficiency for quality systems and audits. Robust construction for the industrial environment Engineered for use beyond the controlled lab, the caliper’s IP67 rating protects against dust ingress and temporary immersion, making it suitable for machining centres and near‑coolant environments where splash resistance matters. A practical jaw length of 100 mm supports secure contact and stable probing in internal bores or between faces, improving handling and repeatability. The digital electronics are sealed and the mechanical slide is finished for smooth movement; together these features translate into lower downtime and less frequent recalibration. For procurement teams, the combination of durable design and integrated data handling supports a measurable efficiency gain in shop‑floor measurement routines. Choose Microtech Metrology’s IP67 wireless caliper for reliable, shop‑ready measurement — contact Metav Werkzeuge in Emmerich for technical consultation and to arrange supply directly from our warehouse. Technical data Article number: 141210204 GTIN: 4061905457791 Brand: Microtech Metrology IP protection: IP67 Display: Swiss Digit 11 mm Facts Measuring range: 22–200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Jaw length: 100 mm eClass: 21170344 Special features Wireless data output Digital caliper construction High-contrast Swiss Digit display Suitable for standard workshop and QC use FAQ What measuring range does this caliper cover? The Internal digital caliper from Microtech Metrology covers a measuring span of 22–200 mm, which places it in the standard category for general machine‑shop work. How precise is the measurement? The instrument provides an accuracy of ±0.03 mm with a display resolution of 0.01 mm, suitable for routine quality control and production checks. Can measurement data be exported electronically? Yes — the caliper is specified with wireless data output, enabling direct transfer of readings into inspection software or data‑logging systems. Is the caliper protected against coolant and dust? The device has an IP67 rating, offering protection against dust ingress and temporary immersion, making it robust for typical workshop environments. Which display type is used for readability? A high‑contrast Swiss Digit 11 mm display is fitted to ensure clear, fast readings on the shop floor. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
22-200mm Internal Digital Caliper Swiss Digit Display 0.01mm Resolution IP67, Calibrated Certificate - Microtech Metrology
Take advantage of the combination of high-resolution measurement (0.01 mm), robust IP67 protection and a clear Swiss Digit display for reliable workshop quality control; order the Internal Digital Caliper directly via Metav Werkzeuge or consult our specialists for application advice. Internal Digital Caliper — IP67 protection, Swiss Digit 11 mm (Microtech Metrology) The Internal Digital Caliper is a rugged, workshop-ready digital measuring instrument suitable for precise internal and external measurements in standard machine and metalwork applications. IP67 dust and water protection Swiss Digit display, 11 mm height Resolution 0.01 mm, accuracy ±0.03 mm Measuring range 22–200 mm Achieve repeatable quality with measurable precision The instrument provides a resolution of 0.01 mm and an accuracy of ±0.03 mm, values that match common industrial expectations for digital calipers up to 300 mm. This level of detail supports reliable inspection routines and reduces scrap by detecting deviations early in the process. The short-to-medium measuring span of 22–200 mm places the tool in the standard workshop category, offering a balanced combination of reach and stiffness that is ideal for daily tasks in machine shops, maintenance and small-series production. The precise readout and consistent mechanics make the caliper suitable for routine quality checks and first-article inspections. Robust design for demanding shop environments Designed for use at the bench and on the shop floor, the caliper features IP67 protection, which guards the electronics against dust ingress and temporary immersion. This durability means fewer service interruptions and longer service life in harsher environments. The device is constructed as a digital measuring instrument with sturdy jaw geometry and a 100 mm jaw length, giving stable contact when taking internal measurements. The rugged housing and sealed display reduce the risk of measurement error caused by contamination or moisture, supporting dependable operation across shifts. Clear display and practical handling for efficient workflows The Swiss Digit display, with a character height of 11 mm, enhances legibility—especially in busy production areas—so readings are quick to capture and transfer into inspection records. The caliper’s user-focused layout and smooth slider movement speed up repetitive measurements and reduce operator fatigue. Integration into existing inspection routines is straightforward thanks to the familiar digital interface and clear numeric output. For teams aiming to improve throughput without sacrificing accuracy, the caliper delivers a pragmatic balance of usability and technical performance. Contact Metav Werkzeuge today for tailored advice on integrating the Microtech Metrology Internal Digital Caliper into inspection routines or to request a quote from our Emmerich-based specialists Technical data Article number: 141210203 GTIN: 4061905457777 Manufacturer: Microtech Metrology Facts Measuring range: 22–200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display: Swiss Digit, 11 mm height Protection class: IP67 Special features Digital caliper construction 100 mm jaw length Suitable for standard machine and metalwork inspections FAQ What measuring range does the caliper cover? The caliper covers a measuring span of 22–200 mm, making it suitable for standard workshop tasks that require both fine detail and practical reach. How precise is the instrument for quality control? With a resolution of 0.01 mm and an accuracy of ±0.03 mm, the instrument supports routine quality-control measurements consistent with industrial digital caliper standards. Is the device suitable for use in workshops with coolant or dust? Yes. The caliper’s IP67 protection rating ensures resistance to dust ingress and temporary immersion, making it appropriate for harsh workshop environments. Can the tool measure internal and external dimensions? The sliding jaw geometry permits both internal and external measurements as well as depth and step checks typical for calipers of this design; refer to SKU 141210203 for the exact configuration. What display features improve usability in production? The Swiss Digit display with 11 mm character height provides high legibility for fast reading and reduces interpretation errors during repetitive inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
22-300mm Internal Digital Caliper Swiss Digit Display 0.01mm Resolution IP67 - Microtech Metrology
Take advantage of the combination of robust ingress protection, clear Swiss Digit read‑out and a practical 22–300 mm measuring range for reliable internal dimension control in production and workshop environments; order the Internal Digital Caliper directly via Metav Werkzeuge or ask our consultants if needed. Internal Digital Caliper by Microtech Metrology — IP67, 22–300 mm range The Internal Digital Caliper from Microtech Metrology is a rugged, workshop‑ready instrument for precise internal dimension checks across the standard 22–300 mm range. IP67 dust- and water-resistant housing Swiss Digit 11 mm high-contrast display Measurement range 22–300 mm for workshop standards Reliable precision that keeps production moving With a stated accuracy of 0.05 mm and a display resolution of 0.01 mm, this instrument delivers measurable improvements in inspection speed and repeatability compared with analogue gauges. The caliper’s measuring span is classified within the standard range (max 300 mm), which offers an optimal balance of reach and rigidity for general engineering, maintenance and quality‑control tasks. The clear numeric read‑out reduces interpretive error, shortening cycle times in repetitive checks and supporting faster decision‑making on the shop floor. Robust construction and a clear digital display for fewer interruptions The IP67 rating means the device resists dust ingress and temporary immersion, protecting the electronics during everyday use and cleaning. The Swiss Digit 11 mm display provides high‑contrast digits that are readable under factory lighting, reducing eye strain and missed readings. A longer internal jaw (150 mm) helps access deeper bores and recessed features without improvised fixturing. Together, these design choices lower downtime and the need for repeat measures, supporting a smoother production flow. Practical features that support traceable workshop inspection Designed by Microtech Metrology for routine internal measurements, the instrument is suited to both standalone checks and batch inspection routines. The compact electronics and ergonomic slide mechanism permit single‑hand operation for quick sampling; the robust enclosure reduces risk of damage from coolant splash or fine particulate. For purchasers seeking a dependable, entry‑to‑mid level digital measuring tool, this caliper bridges bench‑tool convenience with industrial resilience, making it a solid choice for machine shops and service departments. Contact Metav Werkzeuge today to discuss how Microtech Metrology’s IP67 internal digital caliper can improve inspection reliability in your workshop — call +49 2822 7131930 or email info@metav-werkzeuge.com for personalised advice and immediate ordering support Technical Data Article number (SKU): 141210303 GTIN: 4061905457784 Manufacturer: Microtech Metrology Digital display: Swiss Digit, 11 mm Protection class: IP67 Facts Measuring range: 22–300 mm Resolution: 0.01 mm Accuracy: 0.05 mm Inner jaw length: 150 mm Special features Digital instrument for internal dimension measurement Workshop‑grade ingress protection High‑contrast numeric read‑out FAQ What measurement tasks is this caliper best suited for? The internal digital caliper is tailored to internal dimension checks—bores, recesses and similar features—across the 22–300 mm span, making it suitable for general machine‑shop and maintenance inspection. How precise is the instrument for routine quality control? The caliper provides a resolution of 0.01 mm and a declared accuracy of 0.05 mm, which is appropriate for standard production sampling and workshop tolerance verification. Does the device tolerate coolant and shop dust? Yes—the IP67 protection rating means the instrument is resistant to dust ingress and temporary immersion, improving durability in harsher workshop conditions. Is the read‑out easy to read under factory lighting? The Swiss Digit 11 mm display offers high‑contrast numerals designed for clear readability in typical workshop illumination, reducing reading errors and inspection time. Who manufactures this caliper and where can more technical information be obtained? The instrument is produced by Microtech Metrology; further product and ordering details are available from Metav Werkzeuge. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2500mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, Swiss Electric Display 11mm, kalibriert nach ISO 17025 - Microtech Metrology
Die Kombination aus ISO 17025‑Kalibrierung, robustem IP 67‑Schutz und dem extra‑langen Messfeld bis 2.500 mm sorgt für verlässliche Messergebnisse bei großformatigen Bauteilen; die integrierte, gut ablesbare Swiss Electric‑Digitalanzeige mit 11 mm Höhe und die Ablesung von 0,01 mm vereinfachen die Messabläufe spürbar. Bestellung und Beratung sind über Metav Werkzeuge möglich, bei Bedarf hilft die technische Beratung weiter. Messschieber von Microtech Metrology Der Messschieber mit digitaler Swiss‑Electric‑Anzeige für präzise Längenmessungen bis 2.500 mm im industriellen Einsatz Extra‑langer Messbereich bis 2.500 mm Swiss Electric Digitalanzeige 11 mm hoch IP 67 Schutz für staub‑ und wasserdichten Einsatz ISO 17025 Kalibrierzeugnis inklusive ABS Messsystem für stabile Messergebnisse Robuste Konstruktion für raue Einsatzbedingungen und lange Reichweite Dank des ausgelegten Querschnitts von 53x8 und der Schnabellänge 300 mm bietet dieses Messgerät die nötige Steifigkeit für große Bauteile. Die Konstruktion ist auf wiederholbare Messzyklen in Fertigung und Montage ausgelegt und reduziert durch die stabile Geometrie Messunsicherheiten. Durch den Schutzgrad IP 67 bleibt die Funktionalität auch bei staubiger Umgebung und kurzfristigem Wasserkontakt erhalten, was den Einsatz in Werkstatt und Produktionslinie erleichtert. Kalibrierung und Messgenauigkeit für nachvollziehbare Qualitätssicherung Das Messgerät verfügt über eine Ablesung von 0,01 mm und eine vom Hersteller angegebene Genauigkeit von 0,09 mm, wodurch es sich für Prüfaufgaben mit mittlerer bis großer Reichweite eignet. Die Lieferung erfolgt vollständig kalibriert nach ISO 17025; ein Kalibrierzeugnis wird mitgeliefert, sodass Messergebnisse direkt in Prüfprotokolle und Qualitätssicherungs‑Workflows übernommen werden können. Einfache Bedienung durch digitale Anzeige und durchdachte Messtechnik Die Swiss Electric‑Digitalanzeige mit 11 mm Ziffernhöhe erleichtert das Ablesen auch bei schlechten Lichtverhältnissen und reduziert systematische Ablesefehler. Das ABS‑Messsystem unterstützt reproduzierbare Schieberbewegungen und stabilisierte Noniusfunktionen, wodurch der Bediener schneller und sicherer arbeiten kann. Die Kombination aus digitaler Anzeige und robustem Schlitten verbessert die Alltagstauglichkeit im Werkstattbetrieb. Eindeutige Einordnung für Großbauteile und Anwendergruppen Mit einem Messbereich bis 2.500 mm gehört das Gerät zur Extra‑Lang‑Kategorie und ist für großformatige Komponenten in Rohr‑ und Behälterbau, Schwerzerspanung oder Formenbau ausgelegt. Prüf‑ und Kalibriereinrichtungen, Vorrichtungsbauer sowie industrielle Fertigungen profitieren von der Kombination aus Reichweite, Schutzklasse und Werkskalibrierung. Das Messgerät bietet sich als präzises Messwerkzeug für Anwender an, die lange Messlängen mit dokumentierter Genauigkeit benötigen. Empfehlung: Das Microtech Messschieber mit ISO‑17025‑Kalibrierung direkt über Metav Werkzeuge beziehen und bei technischen Fragen den telefonischen oder schriftlichen Kontakt nutzen: info@metav-werkzeuge.com, +49 2822 7131930. Produktmerkmale Artikelnummer: 141073255 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905454486 Messsystem: ABS Fakten Messbereich: 0–2500 mm Ablesung: 0,01 mm Genauigkeit: 0,09 mm Schnabellänge: 300 mm Querschnitt: 53x8 mm Digitalanzeige Höhe: 11 mm Besonderheiten IP 67 Schutz, staub‑ und wasserdicht ISO 17025 Kalibrierung mit Kalibrierzeugnis, nachvollziehbare Prüfprotokolle Digitale Swiss Electric Anzeige, gute Ablesbarkeit ABS Messsystem für stabile Messführung Digitale Ausführung für einfache Integration in Messabläufe FAQ Wie wird die Genauigkeit des Messgeräts dokumentiert? Das Microtech Messschieber (Artikelnummer 141073255) wird vollständig nach ISO 17025 kalibriert ausgeliefert; das mitgelieferte Kalibrierzeugnis dokumentiert die Messwerte und erleichtert die Einbindung in Zertifizierungs‑ und Prüfprozesse. Eignet sich das Messgerät für den Einsatz im Freien oder in feuchten Bereichen? Durch den Schutzgrad IP 67 ist das Gerät gegen Staub geschützt und kann kurzfristigem Eindringen von Wasser widerstehen, weshalb es auch in feuchteren Fertigungsbereichen zuverlässig verwendet werden kann. Welche Messlängen deckt das Gerät ab und für welche Anwendungen ist das sinnvoll? Mit einem Messbereich von 0–2500 mm ist der Schieber für großformatige Bauteile geeignet und klassifiziert als Extra‑Lang; typische Einsätze finden sich im Rohr‑ und Behälterbau, Formenbau und der Schwerzerspanung. Wie gut lässt sich die Anzeige ablesen und wie hilft das in der Praxis? Die Swiss Electric Digitalanzeige mit 11 mm Ziffernhöhe bietet hohe Lesbarkeit, reduziert Ablesefehler und beschleunigt Messabläufe, was gerade bei Serienprüfungen Zeit spart. Ist das Gerät für präzise Laborprüfungen geeignet? Dank der Kalibrierung nach ISO 17025 und der Ablesung von 0,01 mm kann das Messgerät in vielen Prüfaufgaben eingesetzt werden; für submikrometergenaue Laboranwendungen sind jedoch spezialisierte Hochpräzisionssysteme empfehlenswert. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2500mm Wireless Digital Messschieber, 0,01mm, IP 67, Kalibriert nach ISO 17025 - Microtech Metrology
Der extra‑lange Messbereich und die robuste Schutzart in Kombination mit der ISO 17025‑Kalibrierung sichern reproduzierbare Messergebnisse für großformatige Bauteile. Nutzen Sie die drahtlose Datenübertragung und die klare Anzeige für effiziente Prozessanbindung. Bestellungen und Fachberatung erhalten Sie unkompliziert über Metav Werkzeuge oder per Anfrage an unsere Technikberatung. Microtech Metrology Messschieber (Digital, 0–2500 mm) Der Messschieber von Microtech Metrology misst zuverlässig bis 2,5 m und ist für großformatige Werkstücke in Industrie und Formenbau ausgelegt Microtech Metrology Messschieber Extra-Lang: Messbereich bis 2.500 mm Swiss electric Display 14 mm für klare Anzeige Wireless Datenausgang zur Prozessanbindung IP67 Schutz für staub- und wassergeschützten Einsatz Präzision für großformatige Messaufgaben mit reproduzierbarer Steifigkeit Der Schieber ist als Extra‑Lang‑Ausführung konzipiert und deckt einen Messbereich bis 0–2500 mm ab, wodurch er speziell für großformatige Bauteile wie Rohre, Gehäuse und Formplatten geeignet ist. Die Abmessung des Trägers und der Querschnitt von 53x8 Millimeter sorgen für ausreichende Profilsteifigkeit, damit Messungen über lange Längen reproduzierbar bleiben. Die lange Backengeometrie mit einer Schnabellänge von 300 Millimeter erleichtert die Aufnahme tiefliegender Messpunkte und reduziert wiederholte Justagen. Robuste Bauweise, klare Anzeige und nahtlose Datenanbindung Die Konstruktion ist auf Werkstattbedingungen ausgelegt: Mit IP67‑Schutzklasse bietet das Werkzeug Schutz gegen Staub und zeitweiliges Untertauchen, was den Einsatz in anspruchsvollen Fertigungsumgebungen ermöglicht. Das Swiss electric Display mit 14 Millimeter Zeichenhöhe gewährleistet gute Lesbarkeit auch bei ungünstigen Lichtverhältnissen. Für die digitale Prozessintegration steht ein Wireless‑Datenausgang zur Verfügung, der die Übertragung von Messwerten in Prüfprotokolle oder Messsoftware erleichtert und manuelle Erfassungsfehler reduziert. Messgenauigkeit, Ablesbarkeit und Kalibrierqualität für Qualitätssicherung Die Elektronik bietet eine Ablesung von 0,01 Millimeter, wodurch feinauflösende Messungen möglich sind; die im Datenbestand angegebene Genauigkeit liegt bei 0,09 Millimeter. Für Qualitätssicherungen relevant ist die werkseitige Auslieferung mit Kalibrierung: Das Gerät wird vollständig nach ISO 17025 kalibriert ausgeliefert und kommt mit entsprechendem Kalibrierzeugnis, sodass es sich direkt in Prüfmittel‑Management und Auditprozesse einfügen lässt. Einsatzfelder, Nutzerkreis und Integration in Produktionsabläufe Dieses Messgerät richtet sich an Anwender im Maschinen‑ und Metallbau, Vorrichtungs‑ und Formenbau sowie an Messlabore, die präzise Messungen an großen Bauteilen benötigen. Durch die Kombination aus großer Reichweite, robuster Bauweise und Wireless‑Schnittstelle eignet es sich für die Einbindung in kontinuierliche Prüfabläufe und Industrie‑4.0‑konforme Datenerfassung. Die praktische Handhabung bleibt erhalten, da die lange Bauform auf ergonomische Bedienung und einfache Positionierung ausgelegt ist. Für große Messaufgaben empfehlen wir den Einsatz des Microtech Metrology Messschiebers mit ISO 17025‑Kalibrierschein; Bestellungen und technische Beratung erhalten Sie direkt über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 141073265 Marke: Microtech Metrology GTIN: 4061905454738 Messsystem: ABS Messbereich: 0-2500 mm Digitale Anzeige: Swiss electric Digit Höhe 14mm Fakten Ablesung: 0,01 mm Genauigkeit: 0,09 mm Messbereich Maximal: 2500 mm Schnabellänge: 300 mm Querschnitt: 53x8 mm Besonderheiten IP67: Staub- und Wasserschutz Datenausgang: Wireless ISO17025: Vollständig kalibriert, Kalibrierzeugnis Anzeige: Swiss electric Digit 14 mm Messsystem: ABS (Absolutmessung) FAQ Wird das Gerät kalibriert ausgeliefert? Der Microtech Metrology Messschieber (SKU 141073265) wird vollständig nach ISO 17025 kalibriert ausgeliefert; ein Kalibrierzeugnis liegt bei und erleichtert die Integration in auditierte Prüfprozesse. Für welche Anwendungen eignet sich dieses Messgerät am besten? Der Messschieber von Microtech Metrology ist für großformatige Messaufgaben konzipiert und eignet sich besonders für Rohr‑ und Behälterbau, Formenbau und Schwerzerspanung, wo lange Messbereiche und reproduzierbare Ergebnisse gefordert sind. Welche Messgenauigkeit und Auflösung bietet das Gerät? Das Gerät liefert eine Ablesung von 0,01 mm und weist die im Datenbestand genannte Genauigkeit von 0,09 mm auf; diese Kombination erlaubt feinauflösende Messungen bei robusten Industrieanwendungen. Wie werden Messdaten übertragen und weiterverarbeitet? Dank des Wireless‑Datenausgangs können Messwerte kabellos an Prüfsoftware oder Datenerfassungssysteme übergeben werden, was manuelle Übertragungsfehler vermeidet und die Produktivität in der Messkette erhöht. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
Precision where standard calipers reach their limits
Specialised calipers (also available as specialist calipers and precision calipers) are engineered for measurements that conventional calipers cannot perform reliably. With custom‑shaped jaws, extended measuring ranges and advanced materials, these tools deliver reproducible results down to the micrometre range, making them indispensable for difficult‑to‑access features such as fine grooves, deep bores and complex contours.
How these calipers tackle demanding measurement tasks
Specialised calipers work by adapting jaw geometry and sensing technology to the application: pointed, blade‑shaped, round or offset jaws capture inside and outside dimensions in confined geometries, while digital, analogue and inductive sensing cover different shop and lab requirements. Digital variants offer quick readouts and data transfer via Bluetooth/USB; analogue models remain reliable in humid or rough workshop environments; inductive versions provide extreme accuracy of ±0.001 mm (1 μm), suited to inspection rooms and laboratories. Wear‑resistant materials such as carbide or ceramic tips withstand coolants, abrasion and corrosion for sustained accuracy.
Measurable benefits for production and inspection
- Faster, repeatable measurements in constrained geometries, reducing inspection time.
- Reproducible results to the micrometre range, raising process reliability.
- Longer service life thanks to carbide or ceramic tips, lowering tool replacement frequency.
- Seamless data integration: digital specialised calipers can feed results directly into CAQ systems via Bluetooth/USB, supporting inline quality control.
- Robust performance across environments—from workshop floors to clean labs—thanks to analogue and inductive options.
Metav as a dependable partner for precision measurement
Metav combines decades of expertise with a comprehensive selection for industry, craft and trade. From Emmerich, Metav operates as a quality filter for the European market, supplying high‑precision tools across more than 250,000 product lines. Trusted by over 48,000 customers, Metav makes high accuracy accessible to every workshop while ensuring reliable fulfilment and consistent product quality.
FAQ
What accuracy can I expect from specialised calipers?
Inductive specialised calipers achieve extreme accuracy of ±0.001 mm (1 μm); digital models enable quick readout and transfer, while analogue versions provide reliable shop‑floor stability.
Which jaw shapes are available and what are they best for?
Specialised calipers come with pointed, blade‑shaped, round and offset jaws designed to measure features such as wall thickness of glass ampoules, gear tooth profiles and O‑ring grooves that standard calipers cannot access.
Can specialised calipers be used for inline quality control?
Yes. Digital specialised calipers with Bluetooth/USB support direct data transfer to CAQ systems, enabling inline testing and automated documentation in series production.
Are there variants suited to harsh workshop environments?
Analogue specialised calipers are less sensitive to moisture and rough handling, and units fitted with carbide or ceramic tips resist coolants, abrasion and corrosion for durable, accurate performance.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com