Rapid and reliable thickness measurement for metalworking quality control
Thickness measurement ensures precise control of sheet and component dimensions in metalworking by providing immediate, process-integrated feedback that reduces scrap and rework. Handheld instruments such as the micrometer, caliper and fine‑needle thickness gauge serve distinct roles: the micrometer with its ratchet delivers a consistent contact pressure, the caliper offers versatility for general measurements, and the fine‑needle gauge provides reproducible results on elastic or very thin materials thanks to its defined spring force. Proper use demands attention to external influences like thermal expansion from body heat and regular calibration with reference gauges at room temperature to maintain accuracy. Employing these tools correctly enables rapid detection of deviations and supports corrective action directly at the workstation.
10mm Thickness Gauge Digital With 30s Timer, Ø10mm Anvils, 1.88N Measuring Force, ISO 2286-3 - Microtech Metrology
The combination of precise 0–10 mm measurement, a 0.02 mm accuracy, and a built‑in 30 s timer supports faster, more reproducible thickness checks for soft materials; order the instrument directly via Metav Werkzeuge or contact the consultants for application advice. Thickness gauge - digital micro range with 30 s timer (Microtech Metrology) The Thickness gauge is a compact digital instrument for fast, repeatable thickness checks on soft and coated materials in workshops and quality control. Digital readout with 0.001 mm resolution Micro range 0–10 mm for precision work Measuring faces Ø10 mm for soft materials Built‑in 30 s timer for repeatable readings Consistent precision for soft and coated materials The instrument is designed for measurements in the micro range (0–10 mm), making it suitable where short, rigid jaws and minimal bending are required. The Ø10 mm measuring faces concentrate the measuring pressure on a small area, which improves contact on compressible surfaces such as rubber and plastic‑coated fabrics. Compliance with ISO 2286‑3 ensures the measurement method matches recognised procedures for flexible coated textiles, giving a verifiable basis for material acceptance and incoming inspection. Reproducible readings that save time A digital display with 0.001 mm resolution combined with a stated accuracy of 0.02 mm provides clear numerical results and reduces interpretation errors common to analogue instruments. The incorporated 30 second timer stabilises the reading interval, so measurements are taken after a consistent dwell time — this reduces variability caused by material relaxation or operator technique. The specified measuring force (1.88 ± 1.9 N) is listed so users can understand how contact pressure affects compressible samples and can reproduce measuring conditions in routine testing. Compact design optimised for the bench or lab With a short measuring range and small footprint, the instrument is easy to position on small test specimens and in confined workspaces. The compact construction supports quick workflows during serial checks or spot tests in production, while the digital readout speeds data capture. Robust measuring faces and a straightforward user interface mean the device integrates naturally into existing quality routines, from R&D labs to production lines, supporting consistent decision-making and fewer retests. Contact Metav Werkzeuge in Emmerich for product selection advice, sample‑application checks or to arrange procurement by phone on +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data Article number: 137331233 GTIN: 4061905451973 Manufacturer: Microtech Metrology Facts Measuring range: 0–10 mm Resolution: 0.001 mm Accuracy: ±0.02 mm Measuring faces: Ø10 mm Measuring force: 1.88 ± 1.9 N Standard: ISO 2286-3 Special features Digital device 30 s timer for stabilised readouts Suitable for rubber and plastic‑coated fabrics Category: thickness gauges FAQ Is this instrument suitable for very thin films and foils? Yes. The thickness gauge has a micro measurement range of 0–10 mm and Ø10 mm measuring faces that make it appropriate for thin films and compressible foils; repeatable results are aided by the built‑in 30 s timer. What reading accuracy can be expected during routine checks? Routine measurements are displayed to 0.001 mm resolution with an accuracy of ±0.02 mm, providing the balance of precision and robustness expected in workshop and incoming inspection tasks. How does the timer improve measurement quality? The 30 second timer standardises the dwell time between contact and reading, reducing variability from material relaxation and operator technique and improving reproducibility across multiple measurements. Can this gauge be used for textiles and coated fabrics? Yes. The instrument aligns with ISO 2286‑3 methodology for thickness testing of flexible coated textiles and is explicitly indicated for rubber and plastic‑coated fabrics. What is the effect of the measuring force on soft specimens? The specified measuring force (1.88 ± 1.9 N) indicates the contact pressure applied; knowing this value helps to reproduce measuring conditions and to interpret results on compressible materials where force influences apparent thickness. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital With 30s Timer, Ø50.5mm Anvil, 2±0.02N Force, ISO 5084-0 - Microtech Metrology
Take advantage of precise, repeatable thickness measurement with a compact micro-range instrument that combines 0–10 mm capacity, 0.01–0.02 mm accuracy and a 30-second timer for consistent results — order directly via Metav Werkzeuge or contact our consultants for application advice. Dicken-Messgerät — Digital thickness gauge (0–10 mm, 30 s timer) by Microtech Metrology The Dicken-Messgerät is a compact digital thickness gauge for testing soft materials in quality control and production, offering micro-range measurement and a timed dwell function for reproducible readings. Compact micro range 0–10 mm High accuracy 0.01–0.02 mm 30 s timer and Ø50.5 mm measuring plate Engineered accuracy for repeatable thickness checks This compact measuring instrument is optimised for micro-range tasks: with a measuring range of 0–10 mm it falls into the very small-category instruments suited to delicate materials. The combination of a stated accuracy of 0.01–0.02 mm and a display resolution of 0.001 mm ensures that small dimensional variations are visible and verifiable. A defined measuring force 2±0.02 N minimises operator-induced scatter by applying a consistent contact pressure, which is particularly important when checking compressible samples. Compliance with ISO 5084-0 provides a recognised reference framework for textile thickness measurement and supports audit-ready procedures. Faster decisions through standardised handling and timed measurement Repeatability in production depends on consistent procedure. The instrument’s 30 s timer standardises the dwell time for soft specimens, reducing variability caused by differing manual hold times and helping to speed up batch testing. The Ø50.5 mm measuring plate offers a stable support area that spreads contact across a representative sample spot, lowering local deformation. As a digital device with high readout resolution, the gauge shortens the time from measurement to decision, supporting efficiency in inspection loops and rapid acceptance or corrective action. Built for integration into quality workflows and routine inspection The gauge is tailored for routine quality assurance of soft and flexible materials such as textiles, where small thickness changes can affect fit, performance or material yield. Clear numeric results and the instrument’s compact footprint make it well suited for bench-top laboratories and production-line sampling alike. Traceable measurement practices are supported by adherence to recognised standards, and the instrument’s robustness and repeatability reduce scrap and rework. For specialised enquiries on how this gauge fits a specific test plan, Metav’s consultants can advise on sampling frequency and comparative measurement techniques. For a detailed consultation about the Microtech Metrology thickness gauge and its suitability for textile or soft‑material inspection, contact Metav Werkzeuge — local advice and fast supply from Emmerich are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 137331235 GTIN: 4061905451997 Manufacturer: Microtech Metrology Digital instrument: yes Norm: ISO 5084-0 Facts Measuring range: 0–10 mm Resolution/readout: 0.001 mm Accuracy: 0.01–0.02 mm Measuring surfaces diameter: Ø50.5 mm Measuring force: 2±0.02 N Special features Timer 30 sec. Suitable for textiles eClass: 21170535 SKU: 137331235 FAQ What materials is this gauge intended for? This gauge from Microtech Metrology is specified for soft materials and is particularly suitable for textiles; the instrument’s plate diameter and controlled measuring force make it appropriate for fabric thickness checks. How precise are the measurements? The instrument provides a display resolution of 0.001 mm and an application accuracy in the range of 0.01–0.02 mm, which supports reliable distinction of small thickness differences in quality control. Why is the 30-second timer useful? A timed dwell promotes consistency when measuring compressible samples; using the 30 s timer reduces variability from differing manual hold times and improves repeatability across operators. Can the gauge be used on production benches? Yes — the gauge’s compact micro-range design and digital readout make it suitable for bench-top inspection stations and routine sampling in production environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital With 30s Timer, Ø50.5mm Measuring Face, 5±0.05N, ISO 5084-A3 - Microtech Metrology
Take advantage of precise, textile‑optimised thickness measurement with a digital instrument that combines a 0–10 mm measuring range, a Ø50.5 mm contact face and a controlled 5 ±0.05 N measuring force for repeatable results. Order the thickness gauge directly via Metav Werkzeuge or ask our consultants if needed. Microtech Thickness Gauge (0–10 mm) — digital textile thickness gauge with Ø50.5 mm anvil A Microtech Thickness Gauge for standardised, repeatable thickness checks of soft materials and textiles in laboratory and production environments. Digital readout with 0.001 mm resolution 0–10 mm range for micro measurements Ø50.5 mm measurement face for soft materials Integrated 30 s timer for standardised pressing Consistent results for delicate and soft materials The instrument is tailored to textiles and comparable soft substrates, classified in the micro measurement category (0–10 mm). The relatively large Ø50.5 mm measurement face distributes load evenly across samples, reducing localised compression and improving representativity when testing fabrics, foams or laminates. Combined with a precisely controlled measuring force of 5 ±0.05 N, the setup supports comparable readings across operators and batches, which is essential for quality control and incoming material inspection. High-resolution digital readout accelerates inspection A digital readout with 0.001 mm display resolution allows fine visual discrimination during manual checks, while the practical measurement accuracy of 0.01–0.02 mm reflects the instrument’s application class for workshop and production QC. The distinction between display resolution and measurement uncertainty is important: the display shows fine increments, but reproducible results depend on correct technique, contact geometry and the specified uncertainty range, so the instrument is ideal for process control where small thickness variations must be detected reliably. Built-in timer for standardised measuring routines The integrated 30 s timer supports a standardised dwell time for compression‑sensitive materials, reducing variability introduced by differing operator timing. This simple automation step increases comparability and efficiency in repeated testing sequences and helps align measurement routines with standards such as ISO 5084‑A3, which the instrument is specified to follow for soft material thickness measurement. Practical integration into laboratory and production workflows Designed as a digital thickness gauge suitable for textile labs and small QC benches, the device provides clear numeric output and a compact footprint for benchtop use. The combination of a controlled measuring force, defined contact geometry and digital indication simplifies operator training and lowers the risk of inconsistent results. For routine quality assurance, the gauge supports quick decision‑making and traceable inspection processes without imposing complex software or heavy installation work. Contact Metav Werkzeuge today to discuss delivery, optional calibration and how the Microtech thickness gauge can be integrated into existing inspection routines from our Emmerich facility. Technical data Article number: 137331236 GTIN: 4061905452000 Manufacturer: Microtech Metrology ECLASS: 21170535 Facts Measuring range: 0–10 mm Measurement face: Ø50.5 mm Measuring force: 5 ±0.05 N Resolution: 0.001 mm Accuracy: 0.01–0.02 mm Standard: ISO 5084-A3 Special features Digital display Integrated 30 s timer Suitable for textiles Micro measurement category FAQ What materials is the gauge suitable for? The Microtech thickness gauge is specified for textiles and similar soft materials; the Ø50.5 mm anvil and defined measuring force make it ideal for fabrics, foams and laminated materials. What measurement range and precision can be expected? The device covers 0–10 mm, with a display resolution of 0.001 mm and a practical measurement uncertainty in the range 0.01–0.02 mm, suitable for routine quality control tasks. How does the measuring force influence results? A stable measuring force of 5 ±0.05 N minimises variability from operator pressure; consistent force ensures better comparability between measurements and across operators. Why is the 30 s timer useful for testing? The integrated 30 s timer standardises dwell time during compression of soft samples, improving repeatability and aligning measurement practice with standardised methods. Which standard does the instrument follow? The instrument is specified with ISO 5084‑A3, a recognised procedure for thickness measurement of textiles and related materials. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital With 5s Timer, 0.001mm Resolution, ISO 2589 - Microtech Metrology
Take advantage of compact digital thickness measurement with 0–10 mm range, 0.001 mm resolution and a 5 s timer for repeatable readings; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Thickness Gauge by Microtech Metrology – Digital, 0–10 mm, 0.001 mm The Thickness Gauge by Microtech Metrology is a compact digital instrument for fast, repeatable measurement of soft materials in workshops and quality‑control environments. Digital readout 0.001 mm resolution 0–10 mm measurement range 5 s hold timer for stable readings Measuring force 3.85 N for repeatability High precision where small dimensions matter Designed for the micro measurement class, this digital instrument covers a 0–10 mm range and is optimised for delicate materials such as leather. The combination of a small measuring span and Ø10 mm contact faces reduces leverage and bending effects, which benefits measurements on thin or flexible samples. With a controlled measuring force of 3.85 N (±0.1 N), the instrument promotes consistent contact pressure, minimising operator‑induced variation and supporting reproducible thickness values. This yields reliable comparative data across batches and short inspection cycles. Digital repeatability and clear traceability The gauge provides a fine 0.001 mm display step and a stated accuracy of ±0.015 mm, enabling precise differentiation of thin materials during incoming inspection or production monitoring. The integrated 5 s timer holds the reading long enough to note values without haste, reducing transcription errors and speeding up inspection routines. Compliance with ISO 2589 offers an objective reference point for quality processes, while the clear digital display shortens decision times in the workshop or at the inspection bench. Such objective metrics support efficiency gains in routine quality control. Practicality for workshop measurement tasks Compact dimensions and an intuitive digital interface allow fast adoption into existing workflows. The instrument’s construction and measurement parameters suit bench‑level quality tasks where space and handling are constrained. By providing consistent, repeatable readings with minimal set‑up, the gauge helps reduce rework and improves process confidence—advantages that translate into measurable time savings in serial control tasks. The device is a pragmatic choice for small‑part suppliers, leather workshops and maintenance departments that require accurate thickness checks without complex integration. For measured, repeatable thickness control from Microtech Metrology, contact Metav Werkzeuge for individual advice and reliable supply: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 137331234 GTIN: 4061905451980 Manufacturer: Microtech Metrology Facts Measurement range: 0–10 mm Resolution: 0.001 mm Accuracy: ±0.015 mm Measuring force: 3.85 ±0.1 N Measuring faces: Ø10 mm Special features Standard: ISO 2589 Timer: 5 s hold Suitable for: leather Digital instrument with clear display Eclass: 21170535 FAQ What materials can be measured with this instrument? The instrument is designed for soft materials and is explicitly suitable for leather, while remaining useful for other thin, flexible substrates where controlled thickness measurement is required. What are the measurement range and resolution? The gauge measures from 0–10 mm with a display resolution of 0.001 mm, enabling fine incremental readings within the micro measurement class. How repeatable are the readings? Repeatability is supported by the controlled measuring force of 3.85 N (±0.1 N) and the 5 s hold timer; stated accuracy is ±0.015 mm, which helps maintain consistent inspection results. Does the instrument meet any standards? Yes—the device is specified to the ISO 2589 standard, providing a recognised benchmark for thickness measurement of relevant materials. Who is the manufacturer of this gauge? The gauge is produced by Microtech Metrology; the product is supplied with the documented technical specifications above and is intended for workshop and QC use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital With 5s Timer, 0.6N Contact Force, ISO 9863-1 - Microtech Metrology
Compact digital precision, resolution 0.001 mm and accuracy ±0.015 mm deliver repeatable readings for soft geosynthetics; the built‑in 5 s timer and controlled measuring force further ensure consistency. Order the thickness gauge directly via Metav Werkzeuge or ask our consultants if needed. Thickness gauge — digital 0–10 mm, ISO 9863-1 compliant The Thickness gauge is a compact digital instrument for fast, repeatable measurement of soft and polymeric geosynthetic materials in the 0–10 mm range. Digital display, 0.001 mm resolution Accuracy ±0.015 mm Timer 5 s for consistent readings ISO 9863-1 compliant standard Precision where material softness matters For measurements on delicate, non‑uniform sheets the instrument combines a resolution of 0.001 mm with an accuracy of ±0.015 mm, which translates into reliable numeric control and fewer outliers in quality reports. The fine resolution makes small thickness changes visible, while the stated accuracy defines the realistic tolerance band for process control. These numerical specs support rational decision‑making: acceptance criteria, statistical process control and pass/fail limits are easier to define and defend in documentation. Stable contact for soft and uneven surfaces A controlled measuring force of 0.6±0.1 N and R1 mm measuring faces are tailored to minimise indentation and local deformation on soft or bituminous layers. The integrated 5 s timer holds the measuring head in place long enough for viscoelastic materials to relax, producing consistent, repeatable readings rather than momentary peaks. Conformity with ISO 9863-1 means that results are comparable across labs and suppliers, reducing disputes and improving traceability. Streamlined workflow in testing and production The digital readout and compact form factor speed up routine checks: readings are immediate and easy to record, reducing cycle time for batch inspections. The compact design suits bench testing, on‑site roll inspections or incoming goods control; measurements that once required several attempts can now be taken consistently in fewer steps, improving throughput without sacrificing accuracy. The instrument is explicitly intended for polymeric and bituminous geosynthetic materials, so it integrates well into geotextile quality routines and contractor checks. Who benefits and how it pays back Laboratories, production QA teams and site inspectors gain a dependable tool for small‑range thickness control. The combination of controlled force, rounded measuring faces and a stabilising timer reduces measurement scatter and the need for rework. Backed by a recognised metrology brand, the device supports better process documentation and faster acceptance decisions, aligning technical performance with procurement and quality goals. Contact Metav Werkzeuge for tailored advice on the Microtech thickness gauge and to request purchasing information — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 137331238 GTIN: 4061905452024 Manufacturer: Microtech Metrology Facts Measuring range: 0–10 mm Resolution: 0.001 mm Accuracy: ±0.015 mm Measuring force: 0.6±0.1 N Display type: Digital Special features Standard: ISO 9863-1 Measuring faces: R1 mm Timer: 5 s Suitable for: polymeric and bituminous geosynthetic materials ECLASS: 21170535 FAQ What measuring range does the thickness gauge cover? The thickness gauge measures from 0 to 10 mm, making it suitable for very thin geosynthetic and polymeric layers. How precise and repeatable are the readings? The instrument offers a resolution of 0.001 mm and an accuracy of ±0.015 mm, so the Microtech thickness gauge (SKU 137331238) provides fine detail and reliable repeatability for quality control. Is the gauge suitable for soft or bituminous geosynthetics? Yes — controlled measuring force of 0.6±0.1 N and R1 mm measuring faces minimise deformation, making it appropriate for polymeric and bituminous materials without uniform thickness. Does the instrument meet an accepted standard? Measurement and procedure conform to ISO 9863-1, ensuring that results are comparable and acceptable in laboratory and commercial settings. What is the purpose of the 5 s timer? The 5 s timer stabilises the reading on viscoelastic or soft materials, allowing transient deformation to settle and improving measurement reproducibility. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital With 5sec Timer, ISO 9863-1-C - Microtech Metrology
Take advantage of precise, repeatable thickness measurements and controlled contact conditions—the digital instrument combines 0–10 mm range, ±0.02 mm accuracy and a controlled measurement force 50±0.5N to deliver consistent results on soft coverings; order the thickness gauge directly via Metav Werkzeuge or ask our consultants if needed. Thickness gauge — Digital, 0–10 mm (Microtech Metrology) A thickness gauge designed for precise checks of polymeric and bituminous geosynthetic coverings, offering a compact micro-range instrument for laboratory and field quality control. Digital instrument with 0.001 mm reading Measurement range 0–10 mm Accuracy ±0.02 mm per ISO Integrated 5 s timer for soft materials Accurate thickness control where it matters The digital construction delivers a 0–10 mm measuring window with a fine reading resolution of 0.001 mm and an accuracy of ±0.02 mm, providing clear numerical results that simplify decision-making in quality control. In practical terms, the high resolution reduces interpretation errors and speeds up inspection routines, while the quantified accuracy offers a verifiable basis for acceptance criteria and process adjustments. This combination supports faster throughput in testing without sacrificing measured precision, which benefits both production lines and laboratory workflows. Consistent compression for soft materials and geosynthetics Repeatable contact conditions are ensured by the specified measurement force 50±0.5N and the built-in 5 s timer, which together standardise the compression of soft or uneven samples. For polymers and bituminous geosynthetics, where thickness readings vary with applied load and settlement time, the timed contact reduces operator-dependent scatter and improves comparability between tests. Compliance with ISO 9863-1-C gives a recognised procedural framework that aids certification and supplier communication, making measurements more defensible during audits and product acceptance. Practical construction for workshop and on-site verification The instrument’s measurement surfaces Ø56.4 mm and compact format reflect a micro-range approach that prioritises handling and stability over long travel, which is ideal for small-area samples and material coupons. The digital readout reduces reading errors associated with analogue scales and simplifies data logging during inspection runs. Ruggedised components and a clear numerical display support both bench-top laboratory use and mobile checks on site, enabling consistent results across different environments without elaborate set-up or extensive training. Confidence in results and process integration By combining measured accuracy, a controlled measuring force and a short timed contact, this gauge promotes reproducible results and straightforward integration into inspection protocols. The instrument supports manufacturers and test labs in maintaining tight tolerances during material qualification and in-process verification. Where contractual specifications demand documented thickness values for geosynthetics, the digital output and standard-conformant method reduce ambiguity and strengthen the evidential value of test records. Contact Metav Werkzeuge today for a technical datasheet or application consultation on this Microtech Metrology thickness gauge; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and ordering guidance. Technical data Article number: 137331237 GTIN: 4061905452017 Manufacturer: Microtech Metrology Facts Measuring range: 0–10 mm Accuracy: ±0.02 mm Reading resolution: 0.001 mm Measuring force: 50±0.5 N Measuring surfaces: Ø56.4 mm Special features Digital instrument Integrated 5 s timer Standard: ISO 9863-1-C Suitable for polymeric and bituminous geosynthetic coverings SKU: 137331237 FAQ What is the measuring range and resolution of the gauge? The gauge measures from 0–10 mm with a reading resolution of 0.001 mm and an accuracy of ±0.02 mm as specified for this Microtech Metrology thickness gauge (SKU 137331237). How does the 5 s timer affect measurements on soft materials? The integrated 5 s timer standardises the contact time before reading, ensuring consistent settlement of soft layers such as bituminous coverings and improving comparability of results obtained with the gauge. Is the measuring force controlled and relevant for repeatability? Yes, the instrument applies a measurement force of 50±0.5N, which limits operator influence and delivers repeatable compression conditions for reliable thickness data. Which standards does the gauge comply with? Measurements are carried out in accordance with ISO 9863-1-C, providing a recognised method for thickness determination on relevant coverings. Can this instrument be used for other materials beyond geosynthetics? While optimised for polymeric and bituminous geosynthetic coverings, the digital format and controlled force make the gauge suitable for a range of soft to semi-rigid materials where the 0–10 mm range and surface geometry are appropriate. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital With Spring-Closing Probe, 0.01mm Resolution, Plastic Case - Metav IndustryLine
Take advantage of a compact digital design that combines a 0–10 mm measuring range, 0.01 mm resolution and a spring‑closing anvil for repeatable micro‑measurements; order the gauge directly via Metav Werkzeuge or consult our specialists for specification advice. M240.135 Thickness Gauge — Digital thickness gauge, 0–10 mm (Metav IndustryLine) The M240.135 thickness gauge is a digital instrument optimised for micro‑range thickness measurement in fine mechanics and precision workshops. Digital display with mm/inch and zero function Measuring range 0–10 mm for micro applications Spring-closing anvil for consistent contact pressure Probe in stainless steel, delivered in transport case Precise micro‑range thickness control for fine mechanics The compact instrument is classified in the Micro category (max. measuring range 10–100 mm), making it well suited to precision tasks where short jaws and low twist are essential. With a resolution of 0.01 mm and an accuracy of ±0.04 mm, the gauge provides verifiable numerical results that support process control and quality documentation. The limited measuring span is an advantage where repeatable, fine‑tolerance checks are required, such as watchmaking, small components or gasket thickness inspection. The numerical display reduces reading errors compared with analogue alternatives and speeds up routine inspection cycles. Consistent contact and repeatability through spring closure A spring‑closing mechanism ensures a steady contact pressure between the measuring faces, which reduces operator‑induced variation and improves repeatability across multiple measurements. The spring‑closing action is particularly valuable in micro‑range work where small force differences can shift results; the fixed contact behaviour streamlines sampling procedures and lowers measurement uncertainty. The probe in stainless steel and flat measuring faces support corrosion resistance and a predictable contact geometry, extending service life under regular workshop use. Practical digital functions for fast inspection and handling The instrument’s display includes ON/OFF, mm/inch selection and a zero function for quick set‑up and relative measurements, enabling straightforward comparisons without external calculation. The small footprint and low dead weight make the gauge easy to handle during fast inspection runs, while delivery in a transport case protects the instrument during storage and transport. These features translate into time savings on the shop floor: faster readings, fewer retakes and clearer logging of measurement values for traceability. Speak to Metav Werkzeuge about specifying the M240.135 for precise micro‑range thickness control and arrange tailored advice from our measurement specialists. Technical data Article number: M240.135 GTIN: 4061905044960 eCl@ss: 21170535 Facts Measuring range: 0–10 mm Resolution: 0.01 mm Accuracy: ±0.04 mm Anvil diameter: Ø5.5 mm Special features Digital display with ON/OFF, mm/inch and zero Spring‑closing mechanism Probe material: stainless steel Delivered in transport case Category: Micro (0–10 mm) FAQ What is the measuring range and resolution? The M240.135 thickness gauge from Metav IndustryLine measures 0–10 mm with a display resolution of 0.01 mm and an stated accuracy of ±0.04 mm. Is this gauge suitable for fine mechanical and watchmaking tasks? Yes, the instrument’s Micro classification and compact jaw geometry make the gauge well suited to fine mechanics and small‑part inspection. How does the spring‑closing feature improve measurements? The spring‑closing mechanism produces consistent contact pressure, reducing operator variation and improving repeatability for successive thickness readings. Is the instrument protected for transport and storage? The gauge is supplied in a transport case to protect the probe and display during transit and storage. What is the anvil diameter of the gauge? The gauge features an anvil diameter of Ø5.5 mm for focused contact on small workpieces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Thickness Gauge Digital, 0.001mm Resolution, 0.8N Measuring Force, ASTM D3767-A1 - Microtech Metrology
Take advantage of precise, repeatable thickness control with a compact digital instrument that combines a 0–10 mm measuring range, 0.01 mm accuracy and ASTM compliance for consistent quality checks. Order the Thickness Gauge directly via Metav Werkzeuge or request application advice from our consultants. Thickness Gauge — Digital thickness gauge, 0–10 mm range, 0.01 mm accuracy (Microtech Metrology) Thickness Gauge is a compact digital instrument for fast, repeatable thickness measurement of soft materials such as rubber in laboratory, production and quality-control settings. Digital display with 0.01 mm resolution 0–10 mm measuring range ASTM D3767-A1 compliant testing standard Ø10 mm measuring faces, controlled 0.8 N force Precise numeric control for standardised inspections The instrument delivers a clear benefit where tight tolerances matter: a display resolution of 0.001 mm combined with a verified measurement accuracy of ±0.01 mm ensures numerical results that are both easy to read and sufficiently precise for routine quality control. The measured force is controlled at 0.8±0.1 N, which reduces operator‑dependent variation and helps achieve reproducible thickness readings. Conformance to ASTM D3767‑A1 provides a recognised testing frame, enabling direct comparison of results across batches and suppliers and supporting documented inspection procedures. Built for soft materials and repeatable contact geometry Designed specifically for soft substrates, the gauge uses Ø10 mm measuring faces to distribute contact pressure and avoid local indentation on materials such as rubber. The controlled contact force and the face geometry together limit surface deformation, so the measured value reflects the material thickness rather than a compressed state. With a compact micro-range format (0–10 mm) the instrument is particularly well suited to fine mechanical parts and small production batches where steady handling and short setup times increase throughput without sacrificing measurement integrity. Practical integration into workshop and lab routines The digital readout and concise feature set make this tool straightforward to use in production, incoming inspection or R&D contexts. The instrument’s size and repeatable measurement parameters shorten cycle time for batch checks and reduce training overhead for operators, while the ASTM compliance supports documented testing procedures. The robust, task-focused design also keeps maintenance simple, so the device remains a reliable part of day‑to‑day measurement routines and supports consistent decision making on acceptance or rework. For application-specific advice or to secure supply from Metav Werkzeuge — leveraging Metav’s quality filter in Emmerich — contact Metav Werkzeuge by e‑mail or phone to discuss fitment and delivery options Technical data Article number: 137331205 GTIN: 4061905454332 Manufacturer: Microtech Metrology Product type: Thickness gauge Model / SKU: 137331205 Facts Measuring range: 0–10 mm Resolution (display): 0.001 mm Accuracy: ±0.01 mm Measuring force: 0.8±0.1 N Measuring faces: Ø10 mm Standard: ASTM D3767‑A1 Display: Digital Special features Suitable for rubber and other soft materials Compact micro‑range instrument for fine work No timer function FAQ What measurement range does the gauge cover? The instrument covers a 0–10 mm measuring range, making it suitable for micro‑range thickness checks and fine mechanical components; reference SKU 137331205 from Microtech Metrology. What resolution and accuracy can be expected? Readability on the digital display is 0.001 mm, with a measurement accuracy specified as ±0.01 mm, which is appropriate for standard quality control tasks and comparative testing. Is the measuring force controlled and why does that matter? Yes. The measuring force is controlled at 0.8±0.1 N to minimise deformation of soft samples; this yields more repeatable thickness values for materials such as rubber. Which standard does the instrument follow for testing? The device is compliant with ASTM D3767‑A1, providing a recognised method for thickness measurement on flexible materials and easing cross‑lab comparability. Is the gauge suitable for production use and lab routines? The digital, compact design and repeatable contact parameters make it suitable for production sampling, incoming inspection and laboratory use; the product is offered by Microtech Metrology under SKU 137331205. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital, 0.001mm Resolution, 1N Pressure, ISO 4593‑P, For Plastics And Films - Microtech Metrology
High-resolution digital measurement down to 0.001 mm, a compact 0–10 mm range and a controlled 1 N measuring force ensure repeatable thickness control of soft materials such as plastics, films and sheets; order the instrument directly via Metav Werkzeuge or consult our specialists for selection advice. Microtech Metrology Digital Thickness Gauge – 0–10 mm, 1 N measuring force The Digital Thickness Gauge is a compact, precision instrument designed for fast, repeatable thickness checks on soft materials such as plastics, films and sheets in quality control and laboratory environments Digital readout, resolution down to 0.001 mm Measuring range 0–10 mm for micro measurements Fixed 1 N measuring force for repeatability Compliant with ISO 4593‑P standard Precision and repeatability for micro measurements The Digital Thickness Gauge from Microtech Metrology combines a digital readout with fine resolution and a low, constant measuring force to deliver reliable results in repetitive inspection work. With a readout resolution down to 0.001 mm and documented accuracy variants (0,001 / 0,002 / 0,003 / 0,012 mm), the device supports critical tolerance checks where small deviations are consequential. The 1 N measuring force reduces specimen compression and, together with the Ø10 mm measuring faces, improves contact consistency across thin films and flexible sheets. Conformance with ISO 4593‑P provides an established reference point for material testing and internal quality records. Suited to soft materials and high-throughput inspection Designed specifically for soft material measurement, the instrument performs direct thickness checks on plastics, films and sheets without complex fixturing. The compact probe geometry minimises local deformation and speeds up handling during serial checks; the absence of a timer keeps the user interface straightforward and reduces sources of operator error. In production and laboratory contexts this translates into fewer rework cycles and clearer pass/fail decisions, supporting efficient throughput and tighter process control for suppliers and manufacturers. Compact classification and practical workshop integration With a measuring range limited to 0–10 mm, the gauge falls into the Micro classification for extremely compact metrology tools, making it well suited to bench-top inspection and laboratory benches where space is limited. The digital display offers immediate numeric readout for rapid data logging and visual verification; measuring faces of Ø10 mm provide a stable contact area for thin or flexible samples. The instrument’s size and repeatable force make it particularly useful where manual handling remains part of the workflow, while still delivering measurement quality that supports traceable documentation. For precise thickness control with Microtech Metrology’s digital gauge, contact Metav Werkzeuge for a technical consultation and supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical details Article number: 137331211 GTIN: 4061905454394 Manufacturer: Microtech Metrology Digital instrument: yes Core technical data Measuring range: 0–10 mm Readout / resolution: 0.001 mm Measuring force: 1 N Measuring faces: Ø10 mm Accuracy variants: 0,001 / 0,002 / 0,003 / 0,012 mm Standard: ISO 4593‑P Special features Suitable for plastics, films and sheets Digital instrument — without timer Category: Measuring instruments → Dial gauges FAQ Is the instrument suitable for thin plastic films and flexible sheets? Yes. The Digital Thickness Gauge is designed for soft materials and provides stable contact with plastics, films and sheets, making it suitable for laboratory and in‑line checks. What resolution and accuracy can be expected? The display supports a resolution of 0.001 mm with accuracy variants listed as 0,001 / 0,002 / 0,003 / 0,012 mm, enabling high‑precision assessment in micro measurement tasks. What measuring force does the device use and why does it matter? The instrument applies a controlled 1 N measuring force; this low, repeatable force minimises compression of soft specimens and improves measurement reproducibility. Does the instrument comply with recognised standards? Yes. The device is specified to meet ISO 4593‑P, which provides a standardised basis for thickness measurement of sheet materials. Which industries and applications benefit most from this gauge? Typical applications include quality control and material testing for flexible packaging, film production, plastic sheet inspection and laboratory sample testing where repeatable, high‑resolution thickness data are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital, 0.001mm Resolution, DIN 53370-F, 3.93N Measuring Force - Microtech Metrology
Take advantage of the precise combination of fine resolution and low measuring force for reliable thickness inspection of delicate materials; the digital readout and conformity with DIN 53370‑F support reproducible results in small‑component production. Order the thickness gauge directly via Metav Werkzeuge or ask our consultants if needed. Thickness gauge by Microtech Metrology – digital, 0–10 mm, high resolution The thickness gauge is a compact digital instrument for fast, repeatable thickness checks of soft materials in quality control and laboratory inspection. Digital display 0.001 mm resolution Measuring range 0–10 mm Low measuring force 3.93 N to protect samples Precise, repeatable readings for delicate materials The instrument delivers a resolution of 0.001 mm on a clear digital display, enabling the detection of very small variations in sheet or film thickness. Combined with a measuring force of 3.93 N, the device minimises compression of soft specimens such as plastic films, preventing measurement artefacts that would otherwise distort results. The device’s short measuring range is deliberately chosen for applications where high repeatability and minimal specimen deformation are essential, such as lab checks, incoming goods inspection and production sampling. Designed for straightforward integration into inspection workflows A compact footprint and a direct digital readout simplify logging and inspection routines: readings are obtained quickly and recorded without manual interpolation, reducing operator error and downtime. Conformity with DIN 53370‑F gives a documented baseline for comparability across batches and suppliers, supporting traceable quality control. The digital format suits both ad‑hoc checks and systematic sampling regimes, helping to sustain throughput in small‑scale production and specialist workshops. Practical features that support efficient quality control The flat measurement face (Ø10 mm) concentrates contact area for consistent contact, while the absence of a timer keeps the device focused on measurement rather than sequencing. The gauge’s simplicity reduces training time for staff and minimises maintenance needs, with benefits for routine inspection tasks where many repetitive readings are required. Where documentation is required, the clear numeric output and stable measuring force assist in creating defensible records for process control and supplier evaluation. Contact Metav Werkzeuge to discuss suitability for film inspection and to secure this Microtech Metrology digital thickness gauge with 0–10 mm range Technical data Article number: 137331206 GTIN: 4061905454349 Manufacturer: Microtech Metrology Core data Measuring range: 0–10 mm Resolution (display): 0.001 mm Stated accuracy: 0.12 mm Measuring force: 3.93 N Measurement face: Ø10 mm Digital instrument: yes Special features Suitable for: plastic films Conforms to: DIN 53370‑F Without timer Category: Messuhren (thickness/dial gauge class) FAQ Is this gauge suitable for measuring thin films and foils? Yes. The Microtech Metrology thickness gauge (digital, SKU 137331206) is intended for soft materials such as plastic films and provides a delicate measuring force to reduce sample compression. What level of precision can be expected from the instrument? The instrument offers a display resolution of 0.001 mm and a stated accuracy of 0.12 mm, which supports fine comparative checks and routine quality control in laboratory and production settings. Does the device comply with any standards? The gauge is designed to conform to DIN 53370‑F, giving a recognised reference for material testing and comparability across inspection setups. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital, 0.001mm Resolution, ISO 3034, For Corrugated Fibreboard - Microtech Metrology
Take advantage of the combination of high-resolution reading, compact 0–10 mm range and ISO 3034 conformity for reliable thickness control of soft and textured materials; order supply or request technical advice via Metav Werkzeuge for smooth integration into inspection workflows. Microtech Metrology Thickness Gauge — Digital, 0–10 mm range Microtech Metrology Thickness Gauge provides high-resolution thickness measurement for soft and structured materials in laboratory and workshop environments Digital thickness gauge 0–10 mm range Resolution 0.001 mm for fine reading Accuracy ±0.02 mm according to ISO 3034 20 N measuring force with Ø35.7 mm face Precision for fine tolerances and textured surfaces The instrument is built for measurements where small deviations matter: with a measurement range of 0–10 mm and a resolution of 0.001 mm (1 µm) the device makes subtle thickness changes visible. The specified accuracy of ±0.02 mm supports reproducible decisions in quality control; the compliance with ISO 3034 documents the applied standard for repeatable mechanical thickness measurement. These parameters translate directly into fewer rejects and better process control when inspecting thin laminates, foils or textured boards. Robust contact and consistent measuring force for soft materials A defined contact pressure is essential for repeatable results on compliant workpieces. The gauge applies a stable measuring force of 20 ± 0.5 N to a Ø35.7 mm measuring face, which spreads load and reduces local indentation on soft surfaces. The digital readout offers immediate numeric values and reduces interpretation errors compared with analogue dials. Together, these features ensure reliable thickness values on wavy fibreboards and similar substrates while simplifying routine measurements on the shop floor. Traceability and workshop fit for inspection routines Traceability is supported through clear identification: SKU 137331209 and GTIN 4061905454370 assist inventory and calibration records. The compact form factor suits bench-top or fixture-based inspection and can be integrated into incoming goods checks or process spot checks. The device balances fine measurement capability with practical workshop handling to reduce measurement time and raise throughput, making it a pragmatic choice for small-batch production and detailed QA tasks. Contact Metav Werkzeuge for tailored advice on integrating Microtech Metrology thickness gauges into inspection routines—technical specialists in Emmerich provide specification guidance and supply coordination. Technical data SKU: 137331209 GTIN: 4061905454370 Category: Dial gauges (measuring instruments) Digital: yes Facts Measurement range: 0–10 mm Resolution / reading: 0.001 mm Accuracy: ±0.02 mm Measuring force: 20 ± 0.5 N Measuring face diameter: Ø35.7 mm Standard: ISO 3034 Special features Suitable for wavy fibreboards Without timer Digital display for direct readings Manufacturer: Microtech Metrology FAQ What measurement range and resolution does the thickness gauge offer? The Microtech Metrology thickness gauge provides a 0–10 mm range with a 0.001 mm (1 µm) resolution, enabling fine differentiation in thin materials. How accurate are the measurements and which standard applies? Measurements are specified at ±0.02 mm accuracy and the instrument is designed and referenced to ISO 3034 for consistent mechanical thickness testing. Is the gauge suitable for soft or textured boards? Yes; the gauge’s measuring face and defined 20 ± 0.5 N force are intended for compliant substrates, making it suitable for textured and wavy fibreboards. What identifiers support traceability in production records? Traceability is supported by SKU 137331209 and GTIN 4061905454370, which facilitate calibration and inventory documentation for the digital thickness gauge. Does the instrument provide analogue or digital readout? The device features a digital readout for unambiguous numeric values and faster recording compared with analogue indicators. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital, 0.01mm Resolution, Ø10mm Measuring Faces, 1.57N Force, DIN EN 1849-2 - Microtech Metrology
Take advantage of the combination of compact measuring range, 0.01 mm accuracy and defined measuring force for reproducible thickness checks of delicate materials; order the instrument directly via Metav Werkzeuge or consult the technical team for application advice. Thickness Gauge (Dicken-Messgerät) — Digital instrument, 0–10 mm, 0.01 mm accuracy by Microtech Metrology The Thickness Gauge is a digital measuring instrument designed for fast, repeatable thickness checks of soft or flexible materials in production and quality control environments. Digital readout with 0.01 mm resolution Measuring range 0–10 mm Measuring force 1.57 N for repeatable results DIN EN 1849‑2 compliant instrument Precision at micrometre scale for small components The instrument is built for the demands of very small measurements: with a measuring range of 0–10 mm it falls into the Micro class, making it especially suitable for fine mechanical work and components where space and stiffness are limiting factors. The 0.01 mm accuracy combined with a fine reading increment of 0.001 mm gives a clear numeric advantage when inspecting thin sheets, foils or film materials, ensuring that tolerances are reliably monitored. The compact form factor keeps the gauge stiff across the short span, which reduces bending errors and supports consistent repeatability in routine checks. Consistent results with controlled contact and compliant design Repeatable measurements are achieved through a defined measuring force of 1.57 N and Ø10 mm measuring faces, which together limit deformation of soft specimens and reduce variation due to operator pressure. Conformity with DIN EN 1849‑2 signals that the device meets recognised standards for thickness measurement of paper and similar materials, adding an institutional level of trust for QA processes. The instrument’s mechanics and contact geometry are explained plainly here so those without a metrology background understand that the combination of face diameter and force helps preserve sample integrity while delivering reliable numerical results. Efficient digital workflow for routine inspections A digital readout minimises reading errors and speeds up inspection cycles compared with analogue alternatives. The clear display reduces interpretation time and permits a focused workflow in production or lab settings where throughput matters. Because resolution and display behaviour are separate from the instrument’s stated accuracy, the device offers a fine display step of 0.001 mm while the guaranteed measurement uncertainty remains 0.01 mm, giving both visual sensitivity and documented conformity for reporting. This balance supports quick decision-making in incoming goods checks and short-run production controls. Where this instrument fits in the measurement chain The gauge is intended for applications such as material suppliers, converting operations, quality labs and any workshop handling thin, flexible or waterproof sheets. Its compact dimensions and focused range make it less suited to large assemblies but ideal where fine tolerance control is required on small parts or film-like substrates. The instrument pairs well with existing process inspection routines and can be used alongside other gauges or calipers where complementary checks are needed. Contact Metav Werkzeuge for tailored advice on the Microtech Metrology thickness gauge and ensure precise, repeatable measurements for delicate materials at your site Technical data Article number: 137331208 GTIN: 4061905454363 eClass: 21170535 Standard: DIN EN 1849-2 Manufacturer: Microtech Metrology Facts Measuring range: 0–10 mm Accuracy: 0.01 mm Resolution (reading increment): 0.001 mm Measuring faces: Ø10 mm Measuring force: 1.57 N Special features Digital instrument Suitable for waterproof or flexible sheets Classified as Micro class (very compact range) Without timer FAQ How precise is the instrument for thin film measurement? The Microtech Metrology thickness gauge (SKU 137331208) delivers an accuracy of 0.01 mm with a display increment of 0.001 mm, making it suitable for tight tolerance checks on films and thin sheets. Can the device be used on waterproof or flexible materials? Yes, the instrument is specified as suitable for waterproof or flexible sheets and uses Ø10 mm measuring faces plus a defined measuring force to reduce deformation of soft materials. What does conformity to DIN EN 1849‑2 mean for daily use? Conformity with DIN EN 1849‑2 indicates the instrument meets the standard requirements for thickness measurement, supporting traceable inspection routines and reliable reporting in quality control. Is the reading immediate and simple to record? The digital readout provides immediate numeric values with fine increment steps, which speeds inspection cycles and reduces reading ambiguity during routine checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Flat Anvil 120mm Overhang, Spring-Closing, Supplied in Case - Metav IndustryLine
Take advantage of the combination of compact design, ±0.02 mm mechanical precision and robust construction for dependable thickness checks on small components; order the instrument directly via Metav Werkzeuge or consult the technical team for further specifications. Thickness gauge M209.307 — Thickness gauge, 0–10 mm, large flat measuring faces, 120 mm reach (Metav IndustryLine) The Thickness gauge M209.307 is a compact, spring-closing 0–10 mm measuring instrument with flat stainless-steel faces and a 120 mm reach, engineered for precise thickness checks in fine mechanical and general workshop environments Spring-closing spindle action Accuracy ±0.02 mm Flat stainless-steel measuring faces Supplied in a transport case Precise micro-range measurement for fine components The design targets the micro range of measurement, with a measuring span of 0–10 mm and a verified accuracy of ±0.02 mm, which places the instrument among the mechanically highest-precision analog gauges. The vernier-style readout offers a resolution of 0.01 mm, allowing reliable detection of small deviations in thin materials. Such specifications make the device well suited to tasks where repeatable, traceable thickness checks are required, for example in small-part inspection or precision trimming operations. Robust construction that eases handling and access A painted cast-iron frame provides high profile stiffness and damping, reducing the risk of measurement scatter from hand movement, while the stainless-steel measuring faces resist wear and contamination for longer service life. The spring-closing spindle ensures consistent contact pressure and faster measurement cycles, and the 10 mm spindle travel combined with a 120 mm reach gives access to recessed surfaces without compromising stability. Delivered in a transport case, the unit is protected during storage and transit and is ready for immediate workshop use. Practical operation and shop-floor benefits As an analog thickness gauge, the instrument combines straightforward handling with robust reliability; the mechanical construction minimises electronic failure modes and simplifies long-term maintenance. At a nominal weight of 0.72 kg, the tool is portable yet steady in use, making repetitive checks less tiring. The clear separation between resolution (0.01 mm) and accuracy (±0.02 mm) is explained on the instrument: the finer resolution enables detection of small steps, while the stated accuracy indicates the expected measurement tolerance under normal operating conditions. For precision micro-measurements choose the Metav IndustryLine thickness gauge M209.307 — contact Metav Werkzeuge for expert advice or to arrange supply from Emmerich: +49 2822 7131930 / info@metav-werkzeuge.com Technical data Article number: M209.307 GTIN: 4061905044120 Manufacturer: Metav IndustryLine Facts Measuring range: 0–10 mm Accuracy: ±0.02 mm Resolution: 0.01 mm Reach (overhang): 120 mm Measuring spindle travel: 10 mm Weight: 0.72 kg Special features Measuring tip: stainless steel Frame: painted cast iron Measuring faces: flat Spring-closing spindle Supplied in a transport case Analog vernier readout FAQ What measuring range and accuracy does the gauge offer? The Thickness gauge M209.307 provides a 0–10 mm measuring range with an accuracy of ±0.02 mm and a readout resolution of 0.01 mm. Is this instrument suitable for fine mechanical parts such as watch or micro components? Yes — classified for the micro range, the gauge is optimised for compact, high-precision measurements on small components and fine mechanical assemblies. Does the gauge come ready for workshop use and is it protected for transport? The M209.307 is supplied ready for workshop use and comes in a transport case to protect the instrument during storage and transit. What materials and construction features support stable measurements? The painted cast-iron frame offers stiffness and damping, while the stainless-steel measuring faces resist wear; the spring-closing spindle provides consistent contact pressure. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Thickness Gauge Flat Anvil 30mm Reach, Spring-Closed, Supplied in Case - Metav IndustryLine
Compact precision and low-maintenance reliability make this instrument an excellent choice for fine mechanical checks: the compact 0–10 mm range paired with a spring-closing mechanism delivers repeatable contact and consistent results, while the flat measuring faces and stainless steel tip ensure stable readings. Order the gauge directly via Metav Werkzeuge or consult the technical team for application guidance. Thickness Gauge 0–10 mm (M209.305) — compact analogue instrument with 30 mm overhang, spring-closing — Metav IndustryLine A compact Thickness Gauge 0–10 mm (M209.305) designed for precise thickness checks and rapid go/no‑go verification in fine mechanical and workshop environments Compact 0–10 mm measuring range Spring-closing mechanism for repeatability Flat measuring faces for accurate contact Precision where tight tolerances matter The small measuring span classifies this instrument in the micro range and is optimised for high‑precision tasks where space is limited. With a readable increment of 0.01 mm and a declared accuracy of ±0.02 mm, the analogue vernier provides a reliable balance between resolution and robustness for routine inspection and bench work. The 30 mm overhang and measuring tip Ø 10 mm allow access to narrow components without compromising stability, making the device particularly suitable for delicate parts and short‑run quality checks. Built to deliver reproducible readings A solid construction combines a stainless steel measuring tip with a painted cast iron frame to resist wear and maintain alignment over time. The spring‑closing feature stabilises the contact force and reduces operator‑induced variation, so repeated measurements stay comparable. Weighing 0.42 kg, the instrument remains portable yet stable at the point of measurement. Delivery in a purpose‑matched transport case protects the gauge during shipment and storage, supporting consistent metrology practice across jobsites. Simple operation, fast workshop integration The mechanical design emphasises low upkeep and intuitive use: the analogue scale requires no batteries and lends itself to quick visual checks and calibration routines. The vernier principle used here is well established in workshops and inspection rooms; it allows for precise manual readings without electronic complexity. As part of a broader measurement strategy, this instrument serves as an efficient first‑check tool or a back‑up to digital instruments, reducing downtime and keeping shopfloor processes flowing smoothly. For dependable fine‑work measurement, request supply of the Metav IndustryLine Thickness Gauge (M209.305) via Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and rapid delivery Technical Data Article number: M209.305 GTIN: 4061905043413 Brand: Metav IndustryLine Facts Measuring range: 0–10 mm Reading (increment): 0.01 mm Accuracy: ±0.02 mm Overhang: 30 mm Measuring tip: Ø 10 mm Weight: 0.42 kg Special features Analogue vernier (mechanical) Spring‑closing mechanism Flat measuring faces Measuring tip in stainless steel Frame in painted cast iron Supplied in a transport case FAQ What measuring range and resolution does the gauge offer? The Thickness Gauge 0–10 mm (M209.305) covers 0–10 mm, reads in 0.01 mm increments and provides an accuracy of ±0.02 mm. Is the instrument suitable for fine mechanical work? Yes. Classified in the micro range, the gauge is optimised for compact parts and fine mechanical applications where short‑span precision and low measurement disturbance are required. What materials form the instrument’s structure? The instrument combines a stainless steel measuring tip with a painted cast iron frame for dimensional stability and durability; it is supplied in a protective transport case. How does the spring‑closing mechanism improve measurements? The spring‑closing feature enforces a consistent contact force, which reduces operator variation and improves repeatability for serial checks. Is the gauge digital or analogue? This is an analogue vernier instrument, offering mechanical readings without electronic components and requiring minimal maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Thickness Gauge Flat Anvils 0.1mm Resolution 15mm Reach, Spring-Open, Stainless Steel Probe - Metav IndustryLine
Compact size and reliable readings make this thickness gauge a practical choice for routine checks: the combination of a 0–10 mm measuring range, 0.1 mm accuracy and a spring‑opening mechanism ensures fast, repeatable thickness inspection. Order the instrument directly via Metav Werkzeuge or contact our consultants for application advice and procurement support. Thickness Gauge 0–10 mm × 0.1 mm — Compact analogue thickness gauge by Metav IndustryLine, Ø10 mm probe Thickness Gauge 0–10 mm × 0.1 mm is a compact, analogue instrument for quick thickness checks on thin materials and small components, designed for workshop spot checks and incoming inspection. Compact 0–10 mm measuring range 0.1 mm resolution and clear analogue dial Flat measuring faces for sheet and small parts Spring‑opening frame for rapid single‑hand use Precise, fast checks for small parts and sheet material This compact thickness gauge provides a straightforward, cost‑effective solution for frequent thickness verification. The 0–10 mm range and 0.1 mm accuracy suit thin sheets, foils and small mechanical parts where repeatable, rapid readings are required. The instrument’s analogue dial delivers an immediate visual result without delay; this simplicity reduces cycle time on the shop floor and supports efficient quality‑control routines. The flat measuring faces minimise surface distortion on thin workpieces, helping to keep measurements reproducible and reliable. Robust construction built for workshop use The measuring tip is made from stainless steel while the frame is a painted cast iron construction, giving a good balance of stiffness and durability in a compact package. The Ø10 mm probe and 15 mm reach are matched to small features and narrow components, and the spring‑opening mechanism enables quick, one‑hand operation that speeds up repetitive checks. Weighing approximately 0.07 kg, the instrument is easy to handle and stow, yet designed to withstand daily use in production and inspection environments. Practical application and benefit for production control As an analogue thickness gauge, this instrument excels for spot checks during incoming inspection, pre‑assembly verification and simple in‑process control; it is particularly suited to workshops that prioritise speed and robustness over advanced digital features. The clear dial and compact form factor support quick decision‑making on the production line, reducing rework and helping to maintain consistent part quality. For organisations seeking a dependable, low‑maintenance measuring tool, the combination of sturdy materials and a straightforward measuring principle offers a reliable baseline for routine metrology tasks. For procurement and practical advice on using Metav IndustryLine measuring tools, contact Metav Werkzeuge in Emmerich — they will recommend the right gauge for specific materials and batch sizes and can assist with ordering and logistics. Technical data Article number: M209.302 GTIN: 4061905043437 Brand: Metav IndustryLine Material: probe stainless steel; frame cast iron, painted Dial type: analogue Facts Measuring range: 0–10 mm Accuracy / resolution: 0.1 mm Probe diameter: Ø10 mm Reach (ausladung): 15 mm Weight: 0.07 kg eCl@ss: 21170535 Special features Analogue dial display Flat measuring faces Spring‑opening mechanism Compact, low‑weight design Suitable for quick workshop and incoming inspections FAQ What is the measuring range and how precise is the gauge? The thickness gauge offers a measuring range of 0–10 mm with a stated accuracy/resolution of 0.1 mm, suitable for routine thickness checks. Which materials can be measured with this instrument? The instrument is intended for sheet materials and small components; the stainless steel probe and flat faces are appropriate for metal, plastics and similar substrates where surface contact is acceptable. Is the gauge suitable for one‑handed operation on the production line? Yes. The spring‑opening frame and compact form make the gauge convenient for rapid, one‑handed spot checks during assembly and inspection. How robust is the construction for workshop use? The combination of a stainless steel probe and painted cast iron frame provides a durable, stiff structure designed for daily workshop handling. What is the article number and brand for ordering? The product is offered as M209.302 under the Metav IndustryLine brand and can be ordered through Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Thickness Gauge For Soft Materials Without Timer, ASTM D1777-1 - Microtech Metrology
Take advantage of the compact measuring range and high repeatability: the combination of a digital readout with 0.001 mm resolution and an accuracy of ±0.02 mm delivers reliable thickness control for soft materials, while ASTM D1777‑1 compliance supports standardised testing. Order via Metav Werkzeuge or consult our advisors for application-specific guidance. Microtech Thickness Gauge — digital thickness gauge for soft materials, 0–10 mm, ±0.02 mm accuracy A Microtech Thickness Gauge designed for precise measurement of soft substrates such as woven and knitted fabrics, delivering repeatable results in quality control and R&D environments. Digital display, 0.001 mm resolution Measuring range 0–10 mm (micro class) Accuracy ±0.02 mm, ASTM D1777‑1 compliant Ø28.7 mm measuring faces, 2.68 N measuring force Precision for delicate materials that demand consistency The instrument is tailored to applications where small thickness differences matter: the digital readout with a resolution of 0.001 mm combined with an accuracy of ±0.02 mm provides a verifiable basis for pass/fail decisions in incoming inspection and production control. Classified as a micro-class device because of its 0–10 mm measuring span, it is compact yet robust enough to reduce operator-induced variation and speed up routine sampling. This precision reduces rework and supports tighter process tolerances. Gentle contact and repeatability for textiles and soft substrates Measuring faces with a diameter of Ø28.7 mm and a controlled measuring force of 2.68±0.13 N ensure that measurements are representative for fabrics and other compliant materials without compressing the sample excessively. Compliance with ASTM D1777‑1 means the device aligns with an established test method for thickness of textile materials, offering traceable results for product specifications and supplier comparisons. The construction therefore supports reproducible readings across repeated cycles. Built for efficient inspection routines and clear documentation A clear digital display shortens reading time and reduces transcription errors, improving throughput in quality-control workflows. The design emphasises ergonomics and simple handling so that repetitive measurements remain consistent across operators; this contributes directly to measurable process improvements. Integration into inspection routines is straightforward: sampling frequency can be increased thanks to the instrument’s rapid response, and results form a reliable basis for corrective action when tolerances are exceeded. Technical clarity to support purchasing and application decisions Key numerical specifications are presented to aid selection: a 0–10 mm measuring range suits thin to medium soft materials; the accuracy of ±0.02 mm corresponds to industry expectations for standard inspection; the resolution of 0.001 mm clarifies the display sensitivity. Suitability for woven or knitted fabrics is explicitly indicated, and the device’s digital nature simplifies logging of results in production records. For specialised calibration requirements, Metav Werkzeuge can advise on traceable services and laboratory options. Contact Metav Werkzeuge today for tailored application advice and to secure rapid supply of this Microtech thickness gauge from our Emmerich distribution centre Technical data Article number: 137331201 GTIN: 4061905454271 Manufacturer: Microtech Metrology Facts Measuring range: 0–10 mm Accuracy: ±0.02 mm Resolution (display): 0.001 mm Measuring face diameter: Ø28.7 mm Measuring force: 2.68±0.13 N eClass: 21170535 Special features Digital instrument for thickness measurement Norm: ASTM D1777‑1 Suitable for woven or knitted fabrics Category: Thickness gauge for soft materials Compact micro-class device for high-precision small-range measurement FAQ What materials is this instrument suitable for? The Microtech thickness gauge is specified for woven or knitted fabrics and other soft materials where controlled measuring force and a moderate contact area deliver representative thickness readings. How precise are the measurements? Readings are displayed to 0.001 mm with an accuracy of ±0.02 mm, providing a level of precision suitable for standard quality-control work and comparative testing under ASTM D1777‑1. Is the measuring force fixed and why does it matter? Yes — the device applies a measuring force of 2.68±0.13 N, chosen to balance contact reliability and minimal compression of soft samples, which improves repeatability for textile testing. Can the gauge be used for laboratory and production checks? The compact design and digital readout make the gauge suitable for both laboratory verification and faster production sampling where consistent thickness control is required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge With 5s Timer For Soft Materials, ASTM D5199-01-B - Microtech Metrology
Take advantage of high-resolution digital readings and a controlled measuring force to protect soft samples while ensuring repeatable results; the integrated timer adds process consistency for film and geomembrane testing. Order the device through Metav Werkzeuge or consult their specialists for specification advice and fast delivery. Thickness Gauge by Microtech Metrology — digital device with timer for soft materials The Thickness Gauge is a compact digital measuring instrument designed for quick, repeatable thickness checks on delicate films and geomembranes, offering fine resolution and a low, defined measuring force for minimal sample deformation. 0.001 mm reading resolution Timer function for soft materials ASTM D5199-01-B compliant Suitable for geomembranes Reliable, high-resolution readings for delicate materials The instrument delivers a 0.001 mm display resolution combined with a stated accuracy of 0.02 mm, enabling confident thickness assessment where small deviations matter. The low and stable measuring force (0.633 ±0.006 N) reduces compression of soft samples, so measurements reflect the true material thickness rather than artefacts introduced by the operator. Conformity with ASTM D5199-01-B provides an objective standard reference for laboratory and production monitoring, supporting documentation and traceability in quality control processes. Compact format tuned to fine‑mechanical and film testing tasks With a measuring range limited to 0–10 mm, the instrument belongs to the compact “micro” class of callipers and gauges: ideal where minimal jaw length and high manoeuvrability are required. The small Ø6.35 mm measuring faces and lightweight form factor make the tool especially suited to inspection of geomembranes, packaging films and other soft laminates, where short, stiff jaws reduce bending and improve repeatability. The integrated timer (options for 5 s and 30 s) ensures that readings are taken after a consistent contact time, improving comparability across operators and batches. Process reliability and straightforward integration into inspection routines As a digital measuring device with precise numerical output, the gauge supports rapid data capture and decision-making on the shop floor. The combination of fine resolution, standardised measuring force and an automatic timing feature reduces operator variance and speeds up routine checks, delivering measurable efficiency gains in incoming‑inspection and production sampling. The device’s specification makes it suitable for application-driven test plans and for integration into documented quality systems where reproducibility and compliance are required. For procurement or technical advice about Microtech Metrology’s digital thickness gauge with timer, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss specifications and delivery options Technical data Article number: 137331231 GTIN: 4061905451959 Manufacturer: Microtech Metrology Facts Measuring range: 0–10 mm Maximum measuring range: 10 mm Resolution: 0.001 mm Accuracy: 0.02 mm Measuring force: 0.633 ±0.006 N Measuring faces: Ø6.35 mm Special features Digital device Timer: 5 s and 30 s Norm: ASTM D5199-01-B Suitable for geomembranes FAQ How precise are the readings from this thickness gauge? The device provides a display resolution of 0.001 mm and a declared accuracy of 0.02 mm, making the thickness gauge suitable for fine film and membrane measurements. Is the measuring force appropriate for soft materials like geomembranes? Yes; the instrument applies a defined measuring force of 0.633 ±0.006 N to minimise compression of soft samples during measurement. Which standards does the instrument comply with? Measurement and test routines are aligned with ASTM D5199-01-B as indicated in the product specification for the Microtech Metrology thickness gauge (SKU 137331231). Can the gauge help to reduce operator variability during routine checks? The digital readout, fixed measuring force and integrated timer (5 s and 30 s) work together to improve repeatability and reduce operator-induced variation when testing films and membranes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge With Ball Anvils 120mm Reach, Stainless Steel Contacts, Painted Cast Iron Frame In Case - Metav IndustryLine
Take advantage of precise micro‑range measurement, a robust cast‑iron frame and a spring‑closing contact for consistent repeatability; order the Thickness Gauge M209.308 directly via Metav Werkzeuge or ask our consultants for application advice. Thickness Gauge M209.308 — Analogue thickness gauge with 0–10 mm range and 0.02 mm accuracy The Thickness Gauge M209.308 is an analogue dial‑type gauge designed for fine thickness measurement tasks in workshops and small‑parts inspection, offering a compact measuring range and a long 120 mm outreach for recessed or deep features Analogue dial with 0.02 mm precision Convex measuring faces for curved surfaces 120 mm outreach for recessed measurements Supplied in protective case Precision where tight tolerances are required This analogue instrument delivers a verified 0.02 mm accuracy, making it well suited to tolerance‑sensitive tasks in component inspection and small‑batch production. The clear dial and a listed reading increment of 0.01 mm allow rapid interpretation of results while the mechanical design reduces electronic failure modes; the product is therefore an economical choice where reliable, repeatable measurement is essential. The compact measuring range places the unit in the micro‑class for fine mechanical work, where short measuring members and minimal deflection improve measurement fidelity. Robust design that withstands workshop use Construction combines a stainless‑steel tip with a cast‑iron frame, painted for corrosion resistance and mechanical protection. This layout balances stiffness and handling weight (approx. 0.75 kg) so the instrument remains stable during contact yet manageable for single‑person use. The spring‑closing contact ensures consistent probe force, which reduces variability from manual operation and improves comparative readings when assessing thin parts or soft materials. Practical handling and application benefits A convex measuring face is fitted for reliable contact on rounded or profiled workpieces, expanding the instrument’s usefulness beyond flat samples. The extended outreach of 120 mm permits measurement of recessed or deep sections that standard short probes cannot reach. Delivery in a protective case safeguards calibration and mechanical elements during transport and storage, supporting longevity and repeatable performance on the shop floor. Secure precise micro‑range thickness measurement with Metav IndustryLine — contact Metav Werkzeuge in Emmerich for technical advice and reliable supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M209.308 GTIN: 4061905044144 Type: Analogue thickness gauge Facts Measuring range: 0–10 mm Resolution: 0.01 mm Accuracy: 0.02 mm Outreach: 120 mm Measuring tip diameter: 10 mm Weight: 0.75 kg Special features Convex (rounded) measuring faces Spring‑closing contact mechanism Measuring tip made of stainless steel Frame of cast iron, painted Supplied in protective case Analogue dial display SKU: M209.308 FAQ Is this instrument suitable for measuring small, rounded parts? The M209.308 thickness gauge by Metav IndustryLine is equipped with convex measuring faces specifically intended for reliable contact on rounded or profiled workpieces. What accuracy and resolution can be expected from this gauge? This analogue thickness gauge provides an accuracy of 0.02 mm with a reading increment of 0.01 mm, suitable for fine inspection and workshop quality control. Can the instrument reach recessed areas or deep features? Yes, the 120 mm outreach allows the gauge to measure recessed or deeper sections that shorter probes cannot access, extending its practical application range. How is the gauge protected during transport and storage? The instrument is supplied in a protective case to safeguard the mechanical components and maintain measurement reliability between uses. What materials and construction ensure stability during measurement? A stainless‑steel measuring tip combined with a cast‑iron frame and a spring‑closing mechanism provides stiffness, repeatability and consistent contact force for dependable readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12mm Digital Thickness Gauge Spring-Closing Anvil Bottom Cast Iron Frame, 0.01mm Resolution, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a highly legible digital readout, a spring-loaded anvil and a compact 0–12 mm range for reliable thickness checks on small components; order the digital thickness gauge directly via Metav Werkzeuge or ask our consultants if needed. Digital Thickness Gauge M240.133 — spring-loaded, 0–12 mm range (Metav IndustryLine) Digital Thickness Gauge M240.133 is a compact, workshop-ready instrument designed for rapid and repeatable thickness measurement of small parts and sheet material in quality-control environments. Compact 0–12 mm measuring range Digital readout 0.01 mm resolution Spring-closing anvil for repeatable contact Cast-iron frame with stainless probe Precise, repeatable readings for small-part inspection The instrument delivers a digital readout with a standard display resolution of 0.01 mm, combined with an accuracy of ±0.02 mm, which supports consistent pass/fail decisions during production control. The spring-loaded anvil ensures constant measuring force, reducing operator-induced variation and improving reproducibility for thin workpieces. The measuring probe is made of stainless steel, while the main bracket is a cast-iron frame, providing a stable contact geometry that keeps repeat errors to a minimum. Suited to micro-range measurement tasks in workshops Classified for the micro measuring range, the gauge’s 0–12 mm range is tailored to fine mechanical parts, small stampings, foils and samples where short jaw length and low bending moment benefit accuracy. The instrument’s compact dimensions and 0.24 kg weight make it portable between bench and inspection station, while the digital interface (mm/inch, zero and on/off buttons) simplifies setup and speeds routine checks without introducing complex procedures. Supplied in a transport case, the unit is protected during handling and storage. Durable design and straightforward operation reduce downtime Robust construction and simple controls make the tool suitable for busy workshop use: the painted cast-iron frame resists knocks, the stainless probe withstands frequent contact, and the electronic readout eliminates manual reading errors. Maintenance is limited to keeping contact faces clean and ensuring the batteries are replaced when the display dims. The result is a reliable measuring instrument that supports efficient inspection cycles and helps maintain production quality over time. Contact Metav Werkzeuge to discuss technical suitability for specific parts or to request further specifications and delivery options for the Metav IndustryLine digital thickness gauge. Technical data Article number: M240.133 GTIN: 4054469112909 Category: Dial gauges Tariff code: 90173000 Facts Measuring range: 0–12 mm Resolution (display): 0.01 mm / 0.0005 in Accuracy: ±0.02 mm Weight: 0.24 kg Special features Digital display with on/off, mm/inch and zero functions Spring-closing anvil for consistent measuring force Probe made of stainless steel Frame made of painted cast iron Delivered in transport case FAQ What level of accuracy can be expected from this gauge? The Digital Thickness Gauge M240.133 provides an accuracy of ±0.02 mm with a display resolution of 0.01 mm, suitable for standard workshop and quality-control tasks. Is the instrument suitable for measuring thin sheets and foils? Yes, the gauge’s micro-range 0–12 mm span and spring-loaded anvil make it well suited to thin sheets, foils and small stamped parts where repeatable contact force is important. How is the gauge protected during transport? The unit is supplied in a transport case to protect the instrument and its probe during handling and storage. Which materials are compatible with this measuring method? The gauge is appropriate for metals and non-metals where surface contact is acceptable; the stainless-steel probe and robust frame handle frequent use on typical workshop materials. How are units and zeroing handled on the display? The electronic readout includes mm/inch selection and a zero function for relative measurements, enabling quick switching and straightforward comparative checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15 mm Digital Thickness Gauge With 9 mm Anvil, Spring-Opening, Flat Measuring Faces, Packaged In Case - Metav IndustryLine
Take advantage of precise, repeatable thickness measurement with a 15 mm digital range, 0.01 mm resolution and a robust cast‑iron frame for stable readings; the instrument is supplied in a protective case and ready for immediate use. Order directly via Metav Werkzeuge or consult the team for application advice. Digital thickness gauge M240.121 — compact digital instrument with 15 mm range and 9 mm anvil The Digital thickness gauge M240.121 is a compact, workshop-ready instrument designed for fast, repeatable thickness checks on small parts and precision components. Digital readout with mm/inch and zero function Measuring range 0–15 mm with 0.01 mm resolution Cast‑iron frame for measurement stability Stainless steel probe and flat measuring faces Precision where it counts: consistent sub‑0.03 mm repeatability The instrument delivers reliable measurement data thanks to its 0.01 mm display resolution and a stated accuracy of ±0.03 mm, a combination that suits fine mechanical and quality‑control tasks where reproducible results are required. Classified in the micro range (measuring range up to 100 mm), this gauge is optimised for short‑span measurements where stiffness and minimal jaw distortion are critical. The small anvil diameter (Ø 9 mm) and compact overhang provide confined‑space access while maintaining stable contact force for consistent readings. Robust construction for routine workshop use A cast‑iron frame, finished with protective paint, provides mass and stiffness that reduce measurement scatter during manual handling. The measuring tip is made from stainless steel, and the unit features flat measuring faces, ensuring durable, wear‑resistant contact surfaces. At just 0.23 kg, the instrument balances portability with sufficient weight to remain steady in normal workshop procedures. Delivery in a protective case simplifies storage and transport, protecting the gauge between inspection cycles. Fast digital workflow and simple operation The clear digital display offers on/off, mm/inch conversion and a zero function for comparative or incremental checks. Readout clarity and the compact dimensions make the device well suited to repetitive inspection tasks on production lines or in inspection benches, speeding up routine checks without complex setup. The spring‑opening action facilitates quick placement on thin sheets and small components, reducing handling time while maintaining measurement integrity. Typical applications and practical benefits for precision teams The gauge is designed for tasks such as fine mechanical assemblies, small part inspection and routine thickness control in watchmaking, electronics enclosures and small‑batch production. Its compact footprint and repeatable accuracy make it an efficient tool for in‑process checks and incoming inspection where quick decision making saves time and reduces scrap. As part of Metav’s product range, the instrument supports a pragmatic approach to precision: dependable specification, straightforward operation and fit‑for‑purpose construction. Why choose this instrument from Metav IndustryLine Selecting this gauge means choosing a measured combination of precision, robustness and everyday usability. The specification favours users who need quick, reproducible thickness information in a compact format, backed by Metav’s experience in delivering tools for industry and trade. The concise feature set keeps training minimal while delivering measurable improvements in inspection throughput and consistency. Contact Metav Werkzeuge for a tailored recommendation on the Metav IndustryLine digital thickness gauge M240.121 and to arrange purchase or technical clarification; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M240.121 GTIN: 4054469112855 eClass: 21170535 Tariff number: 90173000 Facts Measuring range: 0–15 mm Resolution: 0.01 mm / 0.0005 in Accuracy: ±0.03 mm Anvil diameter: 9 mm Overhang / reach: 15 mm Weight: 0.23 kg Special features Frame: cast iron, painted Probe: stainless steel Measuring faces: flat Display functions: on/off, mm/inch, zero Delivery: protective case for transport Operation: spring‑opening mechanism Digital instrument for thickness measurement Category: dial indicators / thickness gauges (Messuhren) FAQ What is the measuring range and how is it classified? The gauge has a measuring range of 0–15 mm, placing it in the micro category for compact, high‑precision short‑span measurements; the M240.121 from Metav IndustryLine is optimised for fine mechanical and small‑part inspection. What resolution and accuracy can be expected? The instrument offers a resolution of 0.01 mm and a stated accuracy of ±0.03 mm, suitable for routine workshop quality control and many fine‑mechanical applications. Which materials and construction details affect durability? The M240.121 features a cast‑iron frame and a stainless steel probe with flat measuring faces; these choices improve stiffness and wear resistance for reliable daily use. Is the instrument supplied ready for workshop use? Yes — the unit is delivered in a protective case and is equipped with a digital display (on/off, mm/inch, zero) and a spring‑opening mechanism for immediate integration into inspection routines. Does the product include an ISO 17025 calibration certificate? The product data does not specify an ISO 17025 calibration; no ISO 17025 certificate is indicated for the M240.121 in the provided information. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15 mm Digital Thickness Gauge With Pointed Cast Iron Frame, Spring-Opening, mm/inch Display, 0.01 mm Resolution, Case - Metav IndustryLine
Precise thickness control with a compact footprint: the combination of a 15 mm measuring range, 0.01 mm resolution and a robust cast‑iron frame ensures consistent results for routine quality checks; order the instrument directly via Metav Werkzeuge or ask our consultants for application advice. Digital thickness gauge M240.123 — 15 mm, digital display, cast‑iron frame (Metav IndustryLine) The Digital thickness gauge M240.123 is a compact, spring‑opening digital instrument for fast thickness measurements in workshops, production lines and quality control. 15 mm measuring range Resolution 0.01 mm / 0.0005 in Cast‑iron frame and stainless probe Delivered in protective case Consistent results for everyday thickness control A small‑format instrument that focuses on measurement reliability: the gauge offers a 0–15 mm range with a standard digital resolution of 0.01 mm and inch readout at 0.0005 in, delivering repeatable data for pass/fail decisions on incoming materials and finished parts. The stated accuracy of ±0.04 mm gives a clear performance expectation for routine inspections, which simplifies process documentation and reduces rework. By presenting objective numerical readouts on a clear digital display, this instrument shortens decision cycles and supports efficient quality control workflows. Fast readings and ergonomics for higher throughput Designed for quick handling, the instrument features a spring‑opening frame and a lightweight construction of just 0.23 kg, permitting comfortable single‑handed operation over many repetitions. The digital display includes on/off, mm/inch and zero functions for immediate comparisons and tolerance checks; the inch option at 0.0005 in resolution helps when mixed‑unit documentation is required. Minimal operator interaction and direct numerical output reduce subjective interpretation and therefore lower measurement-related variability in production environments. Robust build and safe transport for workshop use Mechanical reliability is delivered by a cast‑iron frame, painted for corrosion resistance, combined with a stainless steel probe for wear resistance at the contact point. The compact instrument is supplied in a protective case for safe transport and workshop storage, ensuring the gauge arrives ready for use and is protected during handling. Lightweight yet sturdy construction balances day‑to‑day durability with the portability needed at inspection benches, incoming goods and assembly stations. For reliable thickness checks with the Metav IndustryLine digital thickness gauge M240.123, contact Metav Werkzeuge for product availability and tailored advice — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: M240.123 GTIN: 4054469112879 ECLASS: 21170535 Tariff number: 90173000 Facts Measuring range: 0–15 mm Resolution: 0.01 mm / 0.0005 in Accuracy: ±0.04 mm Weight: 0.23 kg Display type: digital Special features Frame: cast‑iron, painted Probe: stainless steel Operation: spring‑opening for single‑hand use Display functions: ON/OFF, mm/inch, ZERO Delivery: protective case for transport FAQ What is the measuring range and resolution of the gauge? The digital thickness gauge M240.123 measures from 0 to 15 mm with a resolution of 0.01 mm and an inch display at 0.0005 in. Is the instrument suitable for frequent workshop use? Yes; the Metav IndustryLine instrument combines a sturdy cast‑iron frame and a stainless steel probe to withstand regular use, while its spring‑opening mechanism and 0.23 kg weight support comfortable single‑hand operation. Which display functions are available on the instrument? The instrument features a digital display with ON/OFF, mm/inch conversion and ZERO functions for quick comparative checks and unit flexibility. How is the instrument delivered and protected during transport? The gauge is supplied in a protective case to ensure safe transport and storage, protecting the device until it is required at the workstation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150-300mm Digital Thickness Gauge Colour Touchscreen, Wireless USB, 400mm Depth - Microtech Metrology
Combine the ±0.06 mm measurement accuracy with a 150–300 mm measuring range and wireless data transfer to speed up inspection routines and reduce transcription errors. Order the instrument directly via Metav Werkzeuge or request tailored advice from their technical consultants for integration into production workflows. Microtech Thickness Gauge — digital thickness gauge with 150–300 mm range and 1.54" colour touchscreen The Thickness Gauge by Microtech Metrology is a digital precision instrument for rapid, repeatable thickness measurement in workshop and quality‑control environments, designed for inspection benches and industrial metrology applications within the 150–300 mm range. 150–300 mm measurement range Colour 1.54" touchscreen display ±0.06 mm measurement accuracy Wireless and USB data output Reliable precision for production control High throughput and consistent decision‑making require reliable measurement. The instrument delivers a stated accuracy of ±0.06 mm, which positions it for routine quality checks and dimensional control tasks where this tolerance meets the specification. The digital readout uses a 1.54‑inch colour touchscreen, making numeric results and menus easy to read at the workbench; this reduces reading errors compared with purely analogue instruments and supports faster process decisions. The combination of measured value stability and clear display helps to shorten inspection cycles while maintaining traceable results. Seamless data handling to reduce administrative overhead Efficient data capture is essential for modern traceability and statistical process control. This gauge offers Wireless and USB data outputs, enabling direct export of measurement logs to inspection software or a PC without manual entry. The wireless connection reduces cable clutter and allows flexible placement on the shop floor, while USB provides a reliable wired option for bench‑level integration. The instrument therefore supports both ad‑hoc logging and structured data collection, helping to simplify documentation and speed up report generation for quality records. Designed for workshop use with extended reach Practicality matters in routine use: the device includes a measuring depth of 400 mm, which permits measurement of components with recessed features or larger assemblies that standard bench gauges cannot reach. Ten measuring faces increase the contact options for different geometries and improve adaptability to diverse parts. Rugged digital electronics and an intuitive touchscreen interface help to reduce operator training time and promote consistent handling across shifts, supporting repeatable results in a busy production environment. For practical advice on integrating the Microtech thickness gauge into existing workflows or for a demonstration of data export options, contact Metav Werkzeuge for application support and ordering assistance via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data SKU: 137300407 GTIN: 4061905460029 Brand: Microtech Metrology Digital display: Colour 1.54" touchscreen Data output: Wireless + USB Facts Measurement range: 150–300 mm Accuracy: ±0.06 mm Measuring depth: 400 mm Measuring faces: 10 eClass: 21170535 Special features Digital instrument for thickness measurement Wireless and USB connectivity Colour touchscreen for improved readability Category: Measuring instruments / dial gauges FAQ What measurement range does the instrument cover? The Microtech thickness gauge covers a measuring range of 150–300 mm (SKU 137300407), suitable for component thicknesses within that band. What is the stated measurement accuracy? The device specifies an accuracy of ±0.06 mm, which is appropriate for routine inspection and production control where that tolerance is acceptable. How can measurement data be exported? Measurement results can be exported via Wireless or USB output, allowing direct transfer to a PC or data‑collection system for traceability and SPC workflows. Can the gauge measure recessed or deep features? Yes; the instrument offers a measuring depth of 400 mm, which increases accessibility to recessed surfaces and larger assemblies compared with shallow‑reach gauges. Is a calibration certificate included with the product? The product data does not specify a supplied calibration certificate; calibration status is not detailed in the provided information. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150-300mm Thickness Gauge Digital Dial With 0.001mm Resolution, 400mm Depth - Microtech Metrology
Take advantage of the combination of precise digital readout, a broad measurement range 150–300 mm and extended measuring depth 400 mm for dependable thickness control in production environments. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Thickness Gauge (Dicken-Messgerät) – digital dial, 150–300 mm range (Microtech Metrology) The Thickness Gauge is a digital measuring instrument designed for workshop and quality-control tasks where reliable thickness checks of medium-sized components are required. Digital readout, 0.001 mm resolution Measurement range 150–300 mm 400 mm measuring depth for larger parts Robust design for workshop use Accurate, repeatable readings for production control The core advantage of the instrument is its digital measurement chain, which provides a stable numerical result and avoids subjective interpretation. With a reading step of 0.001 mm and an indicated accuracy ±0.07 mm, the device is suited to routine dimensional checks where repeatability and traceable results are required. This performance reduces setup iterations and inspection time, supporting a smoother workflow in small-series production and quality assurance stations. Practical range and depth for larger workpieces Equipped with a measurement range 150–300 mm and a measuring depth 400 mm, the gauge accommodates components that exceed typical bench‑scale parts while still being manageable in a standard workshop. The instrument’s contact faces (10 mm) give a defined area for consistent placement on curved or flat surfaces, which helps maintain stable contact force during measurement. These dimensions make the tool a practical choice for maintenance departments, jigs and fixtures inspections, and mid‑range production checks. Clear numeric display and straightforward interpretation A digital dial simplifies reading and documentation: the 0.001 mm resolution ensures that even small deviations are visible on-screen, while the numeric display removes the need for manual interpolation. For teams less familiar with metrology, this clarity shortens training time and lowers the risk of transcription errors during quality reports. When process control is the priority, the combination of fine resolution and easy-to-read digits supports faster decision-making and reduces scrap and rework. Durability, handling and integration into the workshop The instrument is built for regular use in industrial environments, offering a robust housing and a design that stands up to routine handling. The digital format facilitates quick checks on the shop floor and can be complemented by existing data‑capture workflows; where further integration is required, Metav Werkzeuge can advise on compatible interfaces and procedures. The unit’s balanced form factor keeps it easy to position while the extended measuring depth enables checks on parts that would otherwise require additional fixturing. For tailored advice or to request procurement through Metav Werkzeuge—based at Emmerich with European stock and reliable logistics—contact our consultants who will recommend the best configuration for the intended application. Technical data Article number (SKU): 137300408 GTIN: 4061905454912 Brand: Microtech Metrology Category: Dial gauge / Thickness measuring instrument Facts Measurement range: 150–300 mm Measuring depth: 400 mm Resolution (reading): 0.001 mm Indicated accuracy: ±0.07 mm Measuring faces: 10 mm Special features Digital display Designed for workshop and QA use Image available for reference FAQ What is the smallest increment visible on the display? The display shows readings in steps of 0.001 mm, allowing fine adjustment and precise recording during inspection with the Microtech Metrology thickness gauge (SKU 137300408). Is the instrument suitable for production spot checks on medium-sized parts? Yes; the 150–300 mm measurement range and 400 mm measuring depth make it suitable for routine production checks and mid‑sized workpieces. How reliable are the measurements compared with analogue gauges? Digital readout removes visual interpolation errors and, together with the stated accuracy of ±0.07 mm, provides a dependable result for many workshop and QA applications. Can the gauge be used on curved surfaces? The measuring faces (10 mm) provide a defined contact area that aids consistent placement on both flat and mildly curved surfaces; for strongly contoured parts, specific fixturing may be recommended. Which environments and tasks is this instrument intended for? The device is intended for workshop inspection, jigs and fixtures checks, and quality-control routines where medium-range thickness measurement and clear digital readings are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
150-300mm Thickness Gauge Digital Indicator, 0.001mm Resolution, 800mm Depth - Microtech Metrology
The combination of a high‑resolution digital readout and a wide 150–300 mm measuring range ensures reliable thickness control across medium‑sized components; pair this with robust construction and a deep measuring throat for consistent inspection cycles. Order the thickness gauge directly via Metav Werkzeuge or consult our advisors for integration into existing inspection routines. Thickness gauge — digital dial, 150–300 mm measuring range (Microtech Metrology) The thickness gauge provides precise digital measurements for quality control and workshop inspection of medium‑sized workpieces, ideal for repeatable thickness checks in production and incoming inspection. Digital readout with 0.001 mm resolution Measuring range 150–300 mm Measuring depth 800 mm Robust construction for repeatable inspection Faster, verifiable thickness control for production A clear digital readout with a reading of 0.001 mm reduces interpretation errors and speeds up routine checks, turning manual measurement into a reproducible data point. The instrument’s specified accuracy of approximately ±0.095 mm supports objective decision‑making during process control: fewer ambiguous measurements lead to fewer reworks and a steadier production flow. By converting each check into a fast, auditable value, the gauge helps to tighten tolerances without slowing down the shopfloor. Designed for practical handling and deeper access With a measuring range of 150–300 mm and a measuring depth of 800 mm, the device reaches further into assemblies and larger components than compact comparators while remaining easy to operate. The measuring faces and mechanical guidance are engineered for repeatability, so every measurement is taken from a stable reference geometry. The digital instrument form factor simplifies reading and data capture compared with analogue alternatives, which is particularly useful in busy inspection benches and bench‑mount setups. Built for consistent inspection and traceability Engineered for regular use in workshop and laboratory environments, the gauge supports quality assurance procedures by delivering consistent numeric results that can be recorded in inspection logs. The combination of a high‑resolution display and a wide working depth makes it suitable for routine QC, batch sampling and incoming part verification. Backed by a recognised manufacturer, the tool integrates into established inspection routines and contributes to demonstrable product quality over time. For assistance selecting the right configuration or arranging delivery via Metav Werkzeuge, please contact Metav Werkzeuge for personalised advice by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data SKU: 137300808 GTIN: 4061905454929 ECLASS: 21170535 Manufacturer: Microtech Metrology Numeric data Measuring range: 150–300 mm Reading / Resolution: 0.001 mm Indicated accuracy: 0.095 Measuring depth: 800 Measuring faces: 10 Special features Digital dial display Category: Dial indicators / measuring instruments Suitable for workshop and laboratory inspection Manufacturer: Microtech Metrology FAQ What is the resolution of the digital display? The digital display provides a resolution of 0.001 mm for fine incremental readings on the thickness gauge from Microtech Metrology. Which measuring range does the instrument cover? The instrument covers a measuring range of 150–300 mm, suitable for medium‑sized components and assemblies. Can this gauge reach recessed areas of large parts? Yes, with a measuring depth of 800 mm the gauge is designed to access deeper or recessed measurement points where shorter instruments cannot reach. Is the device appropriate for routine quality control in production? The device is well suited to routine QC tasks; its digital readout and repeatable guidance help to standardise measurements in production and incoming inspection. Who manufactures this thickness gauge and where can technical specifications be verified? This thickness gauge is manufactured by Microtech Metrology; additional technical specifications and verification documents can be requested from the manufacturer or via Metav Werkzeuge. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Reliable thickness measurement at the workbench
Thickness measurement, also referred to as thickness gauging or thickness testing, is a core quality assurance routine in metalworking and workshop environments. It covers fast, flexible checks at the workbench and ensures that dimensional tolerances are monitored during production.
How the common hand tools work and where to use them
The most frequently used instrument for thickness measurement is the outside micrometer with ratchet, which ensures a constant measuring pressure and thus reduces subjective operator influence. For universal tasks, the caliper remains indispensable; however, because a caliper lacks a defined contact pressure it is more susceptible to pivoting errors, particularly on softer materials. When measuring elastic or very thin workpieces, dial thickness gauges with a defined spring force are often used because they keep the contact force independent of the operator and deliver high reproducibility. External influences must be considered for all hand tools: thermal expansion caused by body heat can affect readings, so instruments should not be held for long periods and must be checked against reference gauge blocks at room temperature.
Practical benefits that improve shop-floor performance
- Reduced operator influence through constant measuring pressure provided by the outside micrometer with ratchet.
- Higher reproducibility when using dial thickness gauges with defined spring force.
- Faster in-process control, enabling immediate corrective action when tolerances deviate.
- Versatility across measurement tasks thanks to the combination of calipers for general checks and micrometres or thickness gauges for precision points.
- Lower rework rates by catching deviations early in the process.
Metav: a dependable precision partner for everyday precision
Metav democratises precision: from its site in Emmerich on the Rhine the company acts as a quality filter for the European market, making high-accuracy measurement accessible to workshops and industry alike. With more than 48,000 customers and a catalogue exceeding 250,000 products, Metav combines decades of technical expertise with a comprehensive range for industry, trades and distributors. For advice on selecting the right thickness measurement tools or on calibration practices, Metav’s specialists can provide tailored guidance to match specific workshop conditions.
Summary
Accurate thickness measurement is the basis for process-related quality control: using the right mix of outside micrometers, calipers and dial thickness gauges minimises operator error, improves reproducibility and allows immediate intervention in the manufacturing process.
FAQ
Which instrument gives the most reproducible thickness reading for thin, elastic materials?
For thin or elastic parts, a dial thickness gauge with a defined spring force typically provides the most reproducible results; within thickness measurement practice, an outside micrometer with ratchet is preferred for general high-precision readings.
How can thermal influence be minimised during hand measurement?
Thermal influence is reduced by avoiding prolonged handling of the instrument, allowing tools to equilibrate at room temperature and routinely checking them against reference gauge blocks as part of thickness measurement procedures.
When is a caliper still appropriate despite its lack of defined contact pressure?
A caliper is appropriate for universal and quick checks, larger features or when speed is required; for critical tolerances within thickness measurement, complementing the caliper with a micrometer or thickness gauge is recommended.
What routine checks maintain accuracy of hand measuring tools?
Regular zero checks, calibration against reference gauge blocks and inspection of the micrometer ratchet or the spring force of thickness gauges are standard procedures to ensure reliable thickness measurement.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com