High-precision caliper gauges for rapid, repeatable measurements
Specialist caliper gauges and quick-test probes deliver fast, reliable geometry checks in production, incoming inspection and workshop use by mechanically or digitally capturing hard-to-reach features such as deep internal grooves, bore depths, tube wall thicknesses and freeform surfaces. Their spring-loaded lever mechanism ensures a defined contact force for absolutely repeatable results independent of the operator, while ergonomic designs allow one-handed operation with the workpiece remaining in the machine or on the inspection table. Available in a range of contact shapes and probe arm geometries, these precision calipers include analogue dial options for robust continuous use and digital models with tolerance signalling and data interfaces for seamless integration into quality control systems.
70-160mm Internal Precision Bore Gauge Retractable Measuring Head Digital ISO 17025 Calibration - Microtech Metrology
Take advantage of digital high-resolution measurement and ISO 17025 traceability to secure reproducible internal inspections; the combination of a fine resolution and a broad 70–160 mm range supports efficient quality control and reduces rework. Order the internal precision bore gauge directly via Metav Werkzeuge or ask the consultants for application advice. Internal Precision Bore Gauge — Digital, 70–160 mm, Microtech Metrology A Microtech Metrology internal precision bore gauge designed for precise internal diameter checks in workshop and production environments, combining high-resolution digital measurement with certified traceability. Digital readout 0.001 mm resolution Measuring range 70–160 mm ISO 17025 calibration included Accuracy and repeatability for routine inspection The instrument delivers a resolution of 0.001 mm and an indicated accuracy of ±0.035 mm, making it suitable for consistent internal measurement tasks across batch inspections. The digital readout reduces interpretation errors that occur with analogue scales and supports faster pass/fail decisions on the shop floor. This level of performance also shortens inspection cycles, as readings are immediate and repeatable, which benefits both production pacing and quality documentation. Practical range and handling benefits Classified in the standard range (70–160 mm), the gauge fills a common niche between compact tools and larger specialty devices: offering a balanced combination of reach and rigidity for typical machine‑shop components. The stated measuring depth of 3000 mm supports access to deeper bores or assemblies when coupled with appropriate extensions or fixturing. The compact digital format aids handling during repetitive internal measurements and reduces operator fatigue compared with bulkier systems. Traceability and quality assurance for certification needs Delivered fully calibrated with an ISO 17025 certificate, the instrument ensures measurement results are traceable and admissible in formal quality systems. The certified calibration provides a documented baseline for process control and supplier audits, enhancing confidence when validating incoming parts or final assemblies. Combined with the digital resolution and documented accuracy, this configuration supports accountable record‑keeping and compliance in regulated manufacturing environments. For traceable internal diameter control with Microtech Metrology’s internal precision bore gauge, contact Metav Werkzeuge in Emmerich for a technical consultation or to request a formal quotation: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 139160833 GTIN: 4061905046322 Manufacturer: Microtech Metrology Digital display: yes Resolution: 0.001 mm Accuracy: ±0.035 mm Measuring range: 70–160 mm Measuring depth: 3000 Facts Resolution: 0.001 mm Accuracy: 0.035 mm Measuring range: 70–160 mm Measuring depth: 3000 mm SKU: 139160833 Special features ISO 17025 calibration certificate included Digital readout for reduced reading error Intended application: internal measurement (standard range) Category: precision measuring instrument FAQ What measuring range does this instrument cover? The internal precision bore gauge covers a measuring range of 70–160 mm, suitable for standard internal diameter checks. Is the instrument supplied calibrated and traceable? Yes, the instrument is delivered fully calibrated with an ISO 17025 certificate, ensuring traceability and documented measurement reliability. What resolution and accuracy can be expected? The device features a digital resolution of 0.001 mm with an indicated accuracy of ±0.035 mm, appropriate for routine workshop and production inspection tasks. For which applications is this tool intended? Designed for internal diameter inspection in machine shops and production control, the gauge fits typical components requiring standard‑range precision. What is the manufacturer and SKU for ordering? Manufacturer: Microtech Metrology; SKU: 139160833 Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
70-160mm Internal Precision Bore Gauge Retractable Probe, Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the blend of high repeatability and ISO 17025 calibration, plus straightforward data transfer, for reliable in‑process control; order directly via Metav Werkzeuge or contact our specialists for integration advice. Microtech Metrology Internal Fine Measuring Instrument — retractable probe, digital touchscreen The Microtech Metrology Internal Fine Measuring Instrument is a compact digital gauge designed for precise internal measurements in quality control and fine mechanical production. Retractable measuring head for confined bores Colour 1.54" touchscreen for clear readout Wireless + USB data output for fast transfer Delivered with ISO 17025 calibration certificate Reduce rejects with dependable internal accuracy The calibrated instrument offers accuracy of 0.012 mm, ensuring measurable reductions in rework and scrap when inspecting internal diameters and bores. The electromechanical probe is retractable, allowing measurements in confined or stepped interiors while the integrated microcomputer stabilises readings before they are displayed. This combination reduces operator influence on results and supports consistent pass‑fail decisions at the production line, contributing to improved throughput. Fast digital documentation and integration Equipped with Wireless + USB connectivity and a 1.54" colour touchscreen, the device simplifies data capture and traceability. Measured values can be exported directly to SPC systems or a PC for archiving, speeding up reporting cycles and reducing transcription errors. The digital interface presents clear figures and menus, enabling quicker cycle times compared with analogue gauges and supporting modern quality management workflows. Calibrated delivery for immediate use in inspection The instrument is supplied fully calibrated under ISO 17025, with a calibration certificate included, which validates measurement capability for audits and supplier quality checks. This formal certification removes a common barrier to immediate shop‑floor deployment and demonstrates conformity with laboratory standards. For inspection labs and suppliers that require documented measurement uncertainty, the delivered certificate streamlines acceptance into quality processes. Designed for practical workshop operation A measurement range of 70–160 mm combined with a measurement depth of 150 mm covers many internal inspection tasks for components such as housings, bearings and sleeves. The compact footprint and digital readout make the unit suitable for bench inspection and integration into test rigs. Rugged construction and the touch display ensure that the instrument endures routine workshop use while keeping operation simple for technicians with variable experience. Contact Metav Werkzeuge to discuss technical integration, request the ISO 17025 certificate or arrange a tailored quotation for this Microtech Metrology internal gauge Technical data Article number: 139160700 GTIN: 4061905044946 Manufacturer: Microtech Metrology Category: Fine measuring instruments Calibration: ISO 17025 certificate included Core technical figures Measurement range: 70–160 mm Measurement depth: 150 mm Accuracy: 0.012 mm Display: 1.54" colour touchscreen Data output: Wireless + USB Digital device: yes Special features Retractable measuring head Integrated microcomputer for signal processing Supplied with calibration certificate Suitable for internal diameter and step measurements FAQ What measurement range does the instrument cover? The instrument covers a measurement range of 70–160 mm and a measurement depth of 150 mm, suitable for many internal inspection tasks. Is the device ready for use in calibrated inspection processes? Yes, the Microtech Metrology internal fine measuring instrument is delivered fully calibrated under ISO 17025 and includes a calibration certificate. How can measurement data be exported from the instrument? Measurement data can be transmitted via Wireless or USB interfaces for direct transfer to PCs or SPC systems. What accuracy can be expected from the device? The calibrated accuracy is 0.012 mm, providing consistent results for routine quality control of internal dimensions. Is the display suitable for harsh workshop environments? The 1.54" colour touchscreen provides clear readout and resilient operation for typical workshop conditions. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
720-1020mm Internal Micrometer With Retractable Probe, Colour Touchscreen, ISO 17025 Calibration - Microtech Metrology
Take advantage of the combination of ISO 17025 calibration, reliable data transfer and a long measurement range for consistent in‑process control of large internal diameters. Order the Internal Precision Gauge directly via Metav Werkzeuge or ask our consultants if needed. Internal Precision Gauge — long‑range digital internal measuring instrument with Wireless + USB The Internal Precision Gauge is a long‑range digital fine measuring instrument designed for internal diameter inspection of large components in tooling, fixture and heavy fabrication environments. ISO 17025‑calibrated with certificate Wireless + USB data output Colour 1.54" touchscreen display Measurement range 720–1,020 mm Accuracy ±0.03 mm for repeatable results Traceable accuracy for large internal measurements The instrument delivers traceable internal measurements across an extensive span, classified as a long‑range caliper for measurements up to 720–1,020 mm. Its stated accuracy ±0.03 mm ensures process‑level precision for quality control tasks, while the included ISO 17025 calibration and accompanying certificate provide documented evidence for audits and supplier qualification. This combination reduces uncertainty in acceptance decisions and supports consistent production tolerances. Fast, reliable data transfer to SPC and CNC systems Integrated Wireless and USB outputs enable secure, direct transfer of measured values into statistical process control or metrology software, eliminating manual transcription and speeding up data logging. The colour touchscreen (1.54") simplifies on‑device review of readings and settings, while the digital interface supports straightforward integration into existing measurement routines. The result is fewer interruptions, faster inspection cycles and smoother handover of results to quality documentation systems. Designed for workshop endurance and practical handling With a measuring depth of 400 mm, this fine measuring device is suited to deep bores and recessed features commonly found in moulds, housings and large assemblies. Built as a long‑range fine measuring instrument, it balances stiffness and reach to maintain repeatability across the full span. Supplied by Microtech Metrology with a full calibration certificate, the instrument combines industrial robustness with the assurance of a verified baseline—helpful where process reliability and supplier transparency matter most. Contact Metav Werkzeuge to request the ISO 17025‑calibrated Internal Precision Gauge from Microtech Metrology (SKU 139910700) and arrange a technical consultation for integration into existing measurement workflows Technical data Article number: 139910700 GTIN: 4061905452888 Manufacturer: Microtech Metrology Category: Fine measuring instruments eClass: 21170310 Measurement range: 720–1,020 mm Measuring depth: 400 mm Accuracy: ±0.03 mm Display resolution: 0.0001 Display: Colour 1.54" touchscreen Data output: Wireless, USB Digital: yes (colour touchscreen) Calibration: ISO 17025 certificate included Intended use: internal diameter inspection Story trigger: dial indicator (messuhr) FAQ What measurement range does this instrument cover? The Internal Precision Gauge covers internal diameters from 720 to 1,020 mm, making it suitable for large bores and housings (Microtech Metrology, SKU 139910700). Is a calibration certificate included with delivery? Yes — the device is delivered fully calibrated according to ISO 17025 and includes the calibration certificate for traceability. How are readings exported for analysis? Measured values can be exported via Wireless or USB interfaces, permitting direct import into SPC software or inspection reports. What is the usable measuring depth for recessed features? The instrument provides a measuring depth of 400 mm, designed to reach deep bores and stepped internal geometries. Which industries benefit most from this instrument? The long‑range fine measuring instrument is optimised for tooling, fixture manufacture, heavy fabrication and any application requiring verified, traceable internal diameter measurements. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
720-1020mm Internal Precision Bore Gauge With Retractable Probe, ISO 17025 Calibrated - Microtech Metrology
With an ISO 17025 calibration and a 720–1020 mm measuring range, this digital internal bore gauge delivers certified traceability and consistent large‑bore checks; combine 0.035 mm accuracy with a fine 0.001 mm resolution for dependable production control and order the instrument directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Internal Precision Bore Gauge (digital) — 720–1020 mm range, ISO 17025 calibrated, Microtech Metrology The Internal Precision Bore Gauge (digital) is a calibrated instrument for accurate internal diameter measurement of large bores in machine construction, jig and fixture work, and component inspection. Digital readout with 0.001 mm resolution Measuring range 720–1020 mm 400 mm measuring depth Delivered calibrated to ISO 17025 Certified accuracy that supports production decisions The instrument offers a combination of certified measurement confidence and practical resolution: the ISO 17025 calibration and supplied calibration certificate document traceability, while the 0.035 mm accuracy and 0.001 mm resolution ensure results suitable for quality control and final inspection stages. This level of verification reduces doubt in measurement records and helps to avoid costly rework by providing repeatable values for acceptance tests and statistical process control. Large‑bore capability with workshop handling in mind Designed for internal diameters from 720 to 1020 mm with a 400 mm effective measuring depth, the device addresses the needs of production departments that handle sizeable housings, sleeves or bearing bores. Classified in the long‑range internal category, the instrument balances reach with handling practicality so that teams can carry out reproducible checks without resorting to customised setups. The digital readout simplifies interpretation and shortens inspection cycles, supporting faster throughput on the shop floor. Practical integration into industrial metrology workflows As a digital precision instrument from Microtech Metrology, this gauge fits established metrology processes and documentation routines. The calibrated output and readable values allow straightforward logging into inspection reports; traceable measurements support supplier chains and audit requirements. Metav’s role as a precision partner further complements the tool: the company supplies certified instruments and offers advice on measurement strategy, promoting consistent metrology across the workshop and production line. Contact Metav Werkzeuge to request a quotation or application advice for Microtech Metrology gauges; certified ISO 17025 instruments and calibration certificates are available from our Emmerich site Technical data Article number: 139910800 GTIN: 4061905454264 Manufacturer: Microtech Metrology Digital: yes SKU: 139910800 Facts Measuring range: 720–1020 mm Measuring range (max): 1020 mm Measuring range (min): 720 mm Measuring depth: 400 mm Readout resolution: 0.001 mm Accuracy: 0.035 mm Special features Delivered with ISO 17025 calibration certificate Digital internal bore measurement Classification: Long (1,000–2,000 mm range) Category: precision measuring instruments FAQ What accuracy can be expected from this internal gauge? The gauge provides an accuracy of 0.035 mm and a display resolution of 0.001 mm, enabling repeatable inspection data for large‑bore checks. Is the instrument supplied with a calibration certificate? Yes, the device is delivered calibrated to ISO 17025 and includes the corresponding calibration certificate for traceability. Which diameter range does the instrument cover? The measuring range covers internal diameters from 720 mm up to 1020 mm with a measuring depth of 400 mm. Can this digital gauge be used in a production environment for routine checks? Yes, the digital readout and certified calibration make it suitable for routine inspection and production control in machine shops and fixture manufacturing. Who manufactures this instrument and what is the SKU? The instrument is manufactured by Microtech Metrology and sold under SKU 139910800. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75mm Extension For Internal Fine Measuring Gauge Expands 50-160mm To 50-180mm - Metav IndustryLine
Extend the measuring capability of existing internal fine measuring equipment with a lightweight, precision accessory; the 75 mm extension increases the measurement span from 50–160 mm to 50–180 mm while remaining compatible with the M208.024, offering a cost‑effective way to avoid purchasing a new instrument. Order directly via Metav Werkzeuge or consult our specialists for fit guidance. 75 mm extension for internal fine measuring instrument — extends range to 50–180 mm (Metav IndustryLine) A 75 mm extension for internal fine measuring instruments designed to expand the usable measuring range to 180 mm for precise internal measurements in workshop and inspection environments. 75 mm range extension accessory Extends measuring range to 50–180 mm Compatible with M208.024 fine measurer Extremely lightweight at 0.02 kg Extend measuring reach without replacing tools Fitting this range adapter allows continuation of precise internal measurements while retaining the original instrument’s handling and characteristics. The 75 mm extension increases the effective measuring range from 50–160 mm to 50–180 mm, delivering an economical alternative to purchasing a second caliper for larger bores or recesses. As a dedicated accessory for internal fine measurement, the adapter preserves workflow continuity and reduces downtime by providing immediate additional reach. Simple integration that maintains repeatable readings Engineered for straightforward mounting to the matching internal fine measuring device, the extension is compatible with the M208.024 interface and adds minimal mass so as not to introduce significant measuring error. Its very low weight (0.02 kg) keeps the centre‑of‑gravity shift small and helps maintain the instrument’s original feel and repeatability. Classified within the standard range category (max. 100–300 mm), this solution suits general machine‑shop and metalworking tasks where reach must be extended without compromising handling. Workshop advantages and practical suitability The accessory is ideal where occasional extra reach is required for internal diameters, grooves or stepped bore measurements. By using an extension rather than a second instrument, setups remain simple and inventory is reduced—a practical benefit for both small repair shops and production lines. Supplied as an accessory for internal fine measuring devices, the adapter supports efficient measurement processes and complements Metav IndustryLine’s focus on accessible precision for everyday workshop use. Enhance measurement flexibility with the Metav IndustryLine 75 mm extension — order via Metav Werkzeuge or contact our consultants in Emmerich for application advice. Technical data Article number: M208.054.V2 GTIN: 4054469181349 Manufacturer: Metav IndustryLine Weight: 0.02 kg Tariff number: 90179000 Category: Measuring instruments / Accessories Numbers / Core technical data Extension length: 75 mm Original measuring range: 50–160 mm Extended measuring range: 50–180 mm ECLASS: 21170310 Weight: 0.02 kg Special features / Compatibility Compatible with M208.024 internal fine measuring device Accessory for extending measuring range Accessory category: internal fine measuring instruments Image file: m208054v-main.png FAQ How much additional reach does the extension provide? The 75 mm extension for internal fine measuring instrument increases the effective measuring range from 50–160 mm to 50–180 mm, enabling measurements of larger internal diameters without a second instrument. Which instruments is this extension compatible with? This extension is designed for the matching internal fine measuring device interface and is explicitly compatible with the M208.024 series; compatibility with other models should be checked against the same mounting specifications. Will the extension affect measurement accuracy? When fitted correctly to the intended internal fine measuring instrument, the lightweight design of the extension minimises influence on handling and repeatability, so accuracy is preserved for typical workshop applications within the standard range. What is the article number or SKU for ordering? The accessory is listed as SKU M208.054.V2 and is supplied under the Metav IndustryLine range for internal measuring accessories. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
79.3-80.7mm Internal Bore Gauge Colour Touchscreen, Wireless/USB - Microtech Metrology
Take advantage of the combination of ultra‑fine 0.0001 mm resolution and a 1,200 mm measuring depth for dependable internal measurements of large‑bore components; order the internal precision gauge directly via Metav Werkzeuge or ask our consultants if needed. Internal Precision Gauge — Microtech Metrology | 0.0001 mm resolution, 1,200 mm reach Internal Precision Gauge designed for precision internal measurement of large‑bore components with integrated data output and a compact colour touchscreen 0.0001 mm resolution Measurement range 79.3–80.7 mm Measuring depth 1,200 mm Wireless and USB data output Colour 1.54" touchscreen display High‑resolution measurement for tight tolerances The instrument delivers an exceptionally fine 0.0001 mm reading, enabling reliable verification of bore diameters in narrow tolerance stacks. Such resolution characterises very high‑precision metrology and supports quality control where repeatability matters. The narrow 79.3–80.7 mm measuring range concentrates performance on a single bore class, reducing setup complexity and ensuring consistent results across repeated measurements. The design suits applications that require sub‑micrometre insight without the complexity of larger laboratory systems. Deep‑reach capability that simplifies large‑bore inspection With a measuring reach of 1,200 mm, this gauge allows internal inspection far beyond ordinary workshop calipers, making it suitable for long barrels, tubes or deep housings. The long measuring depth preserves handling ergonomics while maintaining stiffness required for reproducible readings; this reduces the need for multiple instruments or cumbersome extensions and shortens inspection cycles in production and maintenance workflows. Classified in the Mikro group for compact high‑precision instruments, the device balances reach and rigidity to keep measurement uncertainty low over extended depths. Seamless data capture to speed up quality workflows Integrated Wireless and USB outputs plus the colour 1.54" touchscreen enable fast transfer of measurement data into inspection reports or SPC systems, minimising transcription errors and accelerating traceability. The hybrid reading arrangement combines a precise mechanical sensing principle with modern digital output, allowing logged values to be exported directly for analysis. This reduces administrative overhead, improves documentation quality and helps maintain process control in serial production or field inspections. Contact Metav Werkzeuge today for application advice and to arrange supply of the Microtech Metrology internal precision gauge with deep‑reach capability and integrated data output Technical data Article number: 138008007 GTIN: 4061905458293 Manufacturer: Microtech Metrology Measurement range: 79.3–80.7 mm Measuring depth: 1,200 mm Resolution/readout: 0.0001 mm Display: Colour 1.54" touchscreen Data output: Wireless, USB Principle: analogue reading with digital display Facts Measuring range min: 79.3 mm Measuring range max: 80.7 mm Measuring depth: 1,200 mm Readout resolution: 0.0001 mm Category: Feinmessgeräte (precision internal gauge) Special features Deep‑bore internal measurement capability Hybrid analogue/digital operation Integrated wireless data transmission USB connectivity for direct export Compact colour touchscreen for immediate readout FAQ What accuracy can be expected from this internal gauge? The internal precision gauge from Microtech Metrology provides a readout resolution of 0.0001 mm; actual measurement uncertainty depends on application conditions, fixturing and environmental influences. Is the instrument suitable for measuring long barrels and tubes? Yes — the device offers a measuring depth of 1,200 mm, specifically intended for long‑reach internal inspections such as barrels, tubes and deep housings. How is measurement data transferred for documentation? Measurement values can be exported wirelessly or via USB from the Microtech Metrology internal precision gauge, facilitating direct import into inspection software or SPC systems. Which measurement range does the gauge cover and what does that mean in practice? The instrument covers 79.3–80.7 mm, a specialised band that focuses precision on a single bore class, simplifying setup and improving repeatability for that size. Is the readout easy to operate in workshop conditions? The colour 1.54" touchscreen combined with a clear analogue sensing principle gives immediate visual feedback and straightforward operation even in routine workshop environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
80mm Digital Height Setting Gauge With 0.01mm Display, Magnetic Stop, mm/inch - Metav IndustryLine
Reliable, compact workshop adjustment: combine precise 0.01 mm resolution with a secure magnetic stop for repeatable setups and rapid router or table saw preparation. Order the device directly via Metav Werkzeuge or consult the Metav team for tailored application advice. Digital height setting device 0–80 mm for router or table saw — Digital display & magnetic stop | Metav IndustryLine A Digital height setting device 0–80 mm for router or table saw engineered to deliver fast, repeatable height adjustments for cutting tools and depth measurements in busy workshops. Digital display 0.01 mm resolution Magnetic stop for repeatable positioning Switchable mm/inch and zero function Suited to router and table saw adjustments Faster, reproducible setups for routine machining A compact electronic height gauge speeds setup times by replacing manual trial measurements with a clear, numerical readout. The integrated digital display shows a resolution of 0.01 mm (0.0005") which supports precise adjustments of cutter depth or saw blade height; this level of detail reduces iterative cutting and scrap, thereby improving throughput. The device’s simple controls—on/off, mm/inch switching and a zero button—enable consistent baseline references across multiple operations, so repeatability becomes part of the process rather than an occasional achievement. Secure positioning that reduces rework and material waste The built-in magnetic stop provides a firm, repeatable anchoring point against fences or machine tables. This physical arrest removes small shifts caused by vibration or hand pressure during setup and ensures the same datum is used each time a tool is set. For trim cuts, groove depths or incremental passes on a router, that stability yields fewer test cuts and less rework. The combination of a precise readout and a reliable mechanical stop translates directly into measurable savings in time and material on the shop floor. Intuitive operation and workshop compatibility Controls are deliberately straightforward to keep focus on the task: a clear display paired with an on/off switch, unit toggle and zeroing function means adjustments are immediate and understandable even in noisy environments. The compact form factor suits storage on a bench or in a tool drawer while remaining robust enough for frequent handling. As a purpose-built height setting tool for routers and table saws, it integrates seamlessly into standard workshop procedures, supporting faster setups and a quieter workflow. For precise router and table saw setups rely on Metav IndustryLine’s practical accuracy and order through Metav Werkzeuge for fast delivery and expert application support from Emmerich. Technical Data Article number: M218.092.N Manufacturer: Metav IndustryLine Description: Digital height setting device 0 - 80 mm for router or table saw SKU: M218.092.N Facts Measurement range: 0–80 mm Resolution: 0.01 mm / 0.0005" Accuracy: 0.05 mm Display units: mm / inch Special features Suitable for setting saw blades, cutter depths and depth measurement Magnetic stop for repeatable positioning Digital display with on/off, mm/inch and zero button Compact, workshop-ready design FAQ What measurement range does the device cover? The device covers a measurement range of 0–80 mm, suitable for fine height adjustments on routers and table saws. What resolution and accuracy are provided? Resolution is 0.01 mm (0.0005"), with an accuracy of 0.05 mm as stated for the unit. Can the display switch between metric and imperial units? Yes, the display allows fast switching between mm and inch for cross-border or legacy tooling requirements. Is the magnetic stop suitable for repeatable settings on a table saw fence? The magnetic stop is designed to provide secure, repeatable positioning against fences or tables to reduce setup variation. Which applications benefit most from this device? Precision adjustments for router bit depth, table saw blade height and other routine workshop depth settings are the primary applications for this height setting device (SKU M218.092.N). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
81.7mm Internal Precision Bore Gauge Colour Touchscreen Wireless/USB - Microtech Metrology
Take advantage of extremely fine resolution and integrated data transfer to shorten inspection cycles and reduce rework; the combination of a 0.0001 mm analogue reading and a colour touchscreen with Wireless + USB output supports efficient quality control. Order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Internal Precision Gauge — compact internal measuring instrument with 80.3–81.7 mm range and colour touchscreen (Microtech Metrology) The Internal Precision Gauge is a compact internal measuring instrument designed for high‑accuracy bore and cylindrical inspections in the 80.3–81.7 mm range, combining a tactile analogue indication with a modern colour touchscreen and digital data output. 0.0001 mm resolution reading Colour 1.54″ touchscreen display Wireless + USB data output Measurement range 80.3–81.7 mm Accuracy that reduces rejects and saves time The instrument delivers an analogue reading with a finest gradation of 0.0001 mm, which translates into measurable reductions in adjustment loops and scrap when tight tolerances are required. The hybrid concept — analogue indication plus a colour touchscreen — provides immediate tactile reassurance while the display summarises measurements for quick decisions. For industrial metrology tasks where repeatability matters, this level of resolution supports consistent pass/fail decisions and improves first‑time yield. Seamless data flow for documented inspection processes Equipped with Wireless + USB data output, the gauge feeds measurement results directly into SPC routines, inspection software or spreadsheets without manual transcription. The 1.54″ colour touchscreen simplifies on‑site checks by showing readouts and status at a glance; combined with digital export, the device speeds up documentation, reduces human error and shortens the audit trail. These features make integration into existing quality workflows straightforward and help maintain traceable measurement records. Compact design suited to confined bores and long reach With a measurement range of 80.3–81.7 mm and a reach capability of 1,200 mm, the instrument is tailored for internal measurements where access is limited yet depth is significant. Its compact head and control layout permit comfortable handling in narrow spaces while preserving stiffness for reproducible results. The configuration supports internal diameter, depth and stepped measurements using the same instrument, which reduces tooling changes and setup time. Robust operation focused on inspection efficiency Built for routine shop‑floor use, the instrument balances precision with practical ergonomics: a clear analogue dial for manual feel, a bright display for rapid checks and reliable data output for downstream processing. The construction emphasises repeatability and easy handling during serial inspections, making it suitable for laboratories and production areas where throughput and documentation are equally important. Contact Metav Werkzeuge for tailored measurement solutions and technical guidance on Microtech Metrology instruments; our Emmerich team will advise on delivery options and application suitability Technical Data Article number: 138008107 GTIN: 4061905458309 Manufacturer: Microtech Metrology SKU: 138008107 Numbers / Core technical data Measurement range: 80.3–81.7 mm Reading resolution: 0.0001 mm Display: Colour 1.54″ touchscreen Reach / measurement depth: 1,200 mm Data output: Wireless + USB Special features / Versions Analogue dial indicator combined with digital readout Suitable for internal bore and cylindrical measurements Compact head for confined-space access Designed for integration into quality workflows FAQ What measurement range does the Internal Precision Gauge cover? The Internal Precision Gauge from Microtech Metrology covers a measurement range of 80.3–81.7 mm (SKU 138008107), suitable for internal diameters within that span. What resolution and repeatability can be expected? The instrument provides an analogue reading resolution of 0.0001 mm, offering high repeatability for fine tolerance inspections as delivered by Microtech Metrology’s internal gauge. How are measurements exported for documentation? Measurements can be exported via Wireless or USB connections; the Internal Precision Gauge supports direct digital transfer to inspection software or data‑logging systems. Is the device suitable for deep internal bores? Yes, the gauge has a measurement depth/reach of 1,200 mm, which allows inspection of deep bores and extended internal features with a compact head design. Does the instrument combine analogue and digital features? The Microtech Metrology internal gauge combines an analogue dial indication with a colour touchscreen display and digital data outputs for both tactile confirmation and electronic documentation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
82.7mm Internal Precision Bore Gauge Colour Touchscreen Wireless/USB, 81.3–82.7mm Range - Microtech Metrology
Benefit from 0.0001 mm resolution, a 1,200 mm measuring depth and convenient Wireless+USB data transfer for reliable in-line bore inspection; these features ensure precise results with efficient data handling. Order the Internal Fine Measuring Instrument directly via Metav Werkzeuge or ask our consultants if needed. Internal Fine Measuring Instrument — analogue bore gauge with colour touchscreen and wireless data The Internal Fine Measuring Instrument is a precision bore gauge for internal diameters from 81.3 to 82.7 mm, designed for deep-reach metrology tasks with a 1,200 mm probe reach and digital data output. Resolution 0.0001 mm 1,200 mm measuring depth Colour 1.54" touchscreen Wireless + USB data output Reduced rework through submicron-capable measurement High mechanical resolution and stable analogue mechanics give reproducible results in routine quality checks. The instrument’s 0.0001 mm reading capability minimises uncertainty where tight tolerances matter, so fewer parts are rejected and less rework is required. The dial-style mechanism provides tactile feedback during setup, while the fine resolution supports documented acceptance criteria and statistical process control. Deep-reach access without compromise on stiffness A measuring depth of 1,200 mm allows internal inspection of long bores, sleeves and cylindrical assemblies without repeated disassembly. The extended reach is engineered to preserve measurement stability along the probe, reducing the influence of deflection and operator variation. This makes the gauge suitable for workshop and bench environments where long, narrow internal features must be checked quickly and reproducibly. Faster inspection cycles and seamless data integration Integrated Wireless+USB transfer and a Colour 1.54" touchscreen streamline measurement capture and traceability. Digital output removes manual transcription, accelerating inspection throughput and easing traceability into SPC or inspection software. The combined analogue/digital concept supports experienced metrologists who want the familiarity of a mechanical gauge alongside modern data workflows. For precision deep‑bore metrology from Microtech Metrology, contact Metav Werkzeuge to discuss delivery options and to secure this instrument for your inspection routines Technical Data Article number: 138008207 GTIN: 4061905458316 Manufacturer: Microtech Metrology Facts Measuring range: 81.3–82.7 mm Measuring depth: 1,200 mm Resolution (reading): 0.0001 mm Display: Colour 1.54" touchscreen Special features Analogue fine measuring instrument Data output: Wireless + USB Suitable for calibre 82 mm Category: Fine measuring instruments FAQ What internal diameters can be measured with this instrument? The Internal Fine Measuring Instrument measures internal diameters from 81.3 to 82.7 mm and is configured for long‑reach inspections up to 1,200 mm. How accurate is the readout and what does it mean for quality control? The gauge provides a 0.0001 mm reading capability; this high resolution supports tighter tolerance control and improves statistical confidence in process monitoring. Which data interfaces are available for traceability? Measurement values can be exported via Wireless+USB, enabling direct transfer to inspection software or data loggers for documentation and SPC. Is the display suitable for workshop use? The Colour 1.54" touchscreen offers clear numeric presentation and simple menu navigation, which accelerates setup and reduces input errors during routine checks. What types of components is the instrument intended for? The device is intended for long, narrow internal features—such as cylinders, sleeves and similar bores—where reach and stability are required for reproducible results. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
85-160mm Internal Micrometer Digital Colour Touchscreen Wireless/USB ISO 17025 Calibration - Microtech Metrology
Benefit from traceable, workshop-ready internal measurement with integrated Wireless + USB data transfer and ISO 17025 calibration—ideal for quality control in machine and metalworking environments. Combine reliable digital readout, a 1.5" colour touchscreen, and a nominal accuracy of 0.012 mm for consistent inspection results. Order the Internal fine bore gauge directly via Metav Werkzeuge or ask our consultants if needed. Internal fine bore gauge — Microtech Metrology, Colour 1.5" touchscreen & Wireless data The Internal fine bore gauge is a digital measuring instrument engineered for precise internal measurements in standard machine‑shop and metalworking applications. ISO 17025 calibrated with certificate Wireless and USB data output Colour 1.5" touchscreen display Measurement range 85–160 mm, high accuracy Accurate measurements for everyday quality control This digital instrument is tailored to the Standard measurement range typical for workshop use: 85–160 mm. That range offers the best compromise between reach and stiffness for routine checks on bores, sleeves and medium‑sized components. The built‑in nominal accuracy of 0.012 mm supports repeatable decisions at incoming inspection or final control, while the fine display resolution ensures small deviations are visible at a glance. Delivered fully calibrated to ISO 17025 with a calibration certificate, the device removes uncertainty about traceability and documentation for audit cycles. Streamlined data capture reduces transcription errors Equipped with Wireless and USB outputs and a colour 1.5" touchscreen, the gauge is designed for modern measurement workflows. Wireless connectivity enables rapid transfer of readings into inspection software or SPC systems, whereas USB provides a simple wired option for secured data dumps. The touchscreen simplifies on‑tool navigation and reduces menu steps, shortening the time between measurement and documentation. This connectivity improves process efficiency and supports digital quality systems without complex retrofitting. Built for reliable, repeatable internal measurement Ergonomics and instrument behaviour matter for repeatability. The digital readout and compact measurement head allow controlled contact and consistent read‑ups, lowering operator‑induced variance compared with manual dial gauges. The instrument’s resolution of 0.0001 mm on the display aids fine judgement when setting tolerances or comparing nominal values. For routine bore inspection in production, this configuration offers a robust combination of sensitivity and practical handling that fits inspection benches and mobile measuring setups alike. Suited to workshops that value traceability and integration Workshops that prioritise documented traceability and seamless data flow will find this instrument particularly useful. The included ISO 17025 calibration certificate provides laboratory‑grade validation of results, supporting quality management requirements without additional third‑party calibration. With its digital interfaces and compact form, the gauge easily becomes part of a centralised quality routine—helping to reduce rework, shorten inspection cycles and maintain a reliable production rhythm. For traceable internal bore measurement from Microtech Metrology, contact Metav Werkzeuge in Emmerich for detailed technical advice and procurement — Metav Werkzeuge offers expert support and dependable delivery for workshop calibration needs. Technical Data Article number: 131160755 GTIN: 4061905045929 Manufacturer: Microtech Metrology Core technical data Measurement range: 85–160 mm Resolution (display): 0.0001 mm Accuracy: 0.012 mm Measuring depth: 5000 Modules: 3 Special features Digital instrument, colour 1.5" touchscreen Data output: Wireless + USB Delivered calibrated to ISO 17025 with certificate Category: Feinmessgeräte FAQ What measurement range does the instrument cover? The Internal fine bore gauge covers 85–160 mm, making it suitable for standard internal measurements in machine and metalworking contexts; see SKU 131160755 for reference. Is the gauge delivered calibrated and traceable? Yes — the instrument from Microtech Metrology is supplied with an ISO 17025 calibration certificate, ensuring laboratory traceability and documented conformity. How can measurement data be exported from the device? Readings can be transmitted wirelessly or via USB; the Internal fine bore gauge supports both Wireless and USB data output for straightforward integration into inspection software or SPC workflows. What level of accuracy can be expected for routine checks? The device specifies a nominal accuracy of 0.012 mm with a display resolution of 0.0001 mm, suitable for reliable shop‑floor quality control and comparative measurements. Is this instrument appropriate for production and workshop environments? Yes — designed for standard workshop use, the gauge combines a practical 85–160 mm range, digital readout and robust connectivity to support frequent inspection tasks and documentation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Fast, repeatable geometry checks in seconds
Caliper gauges (also referred to as precision calipers or quick-action gauges) are high-efficiency fine measuring instruments designed for precise geometry control in the production environment. Need to verify internal grooves, pipe wall thickness or small bores quickly? These tools deliver reliable results at sampling speed, making them ideal for series production, incoming goods inspection and workshop testing.
How they work and where they belong
The core of these devices is a spring-loaded lever system that applies a defined contact force, so measurements remain repeatable and independent of the operator’s feel. Caliper gauges capture hard-to-reach features — deep internal grooves, notches, freeform surfaces and thin walls — either mechanically or in digital form. Ergonomic one-handed operation allows the workpiece to stay in the machine or on the test table while checks are performed, reducing handling and downtime.
Practical advantages that improve throughput
- Consistent repeatability due to defined contact force, lowering measurement scatter.
- Rapid sampling: geometry checks are performed in the time of a few seconds, reducing cycle times.
- Flexible contact options such as ball, blade or disc contacts, matching different workpiece geometries.
- Choice of robust analog models or digital units with Go/NoGo tolerance indication and interfaces for direct integration into digital quality assurance.
- Ergonomic design that shortens set-up and inspection times, increasing shop-floor productivity.
Metav: a reliable precision partner for industry
Metav combines decades of metrology experience with a broad offering from Emmerich, acting as a quality filter for the European market. With more than 48,000 customers and over 250,000 products, Metav supplies a comprehensive selection of caliper gauges and accessories, helping purchasing managers reduce supplier complexity while securing reliable supply and technical competence.
Summary
Caliper gauges — precision calipers and quick-action gauges — provide fast, repeatable and operator-independent measurements for demanding industrial inspection tasks, delivering measurable gains in throughput and quality control.
FAQ
What makes caliper gauges suitable for deep internal measurements?
The spring-loaded lever system in caliper gauges ensures a defined contact force while specialised stylus geometries (ball, blade, disc) reach deep grooves and notches, enabling precise capture of internal features.
Can digital caliper gauges be integrated into existing quality systems?
Yes. Digital caliper gauges often include tolerance indication (Go/NoGo) and data interfaces, allowing direct connection to digital quality assurance systems for automated logging and analysis.
Which contact form should I choose for thin-walled parts?
For thin or delicate walls, disc or ball contacts minimise local deformation; Metav’s product range lists the available contact geometries so you can match the caliper gauge to the application.
How do caliper gauges maintain operator-independent repeatability?
Defined contact force from the spring-loaded lever system removes variability caused by hand pressure, so caliper gauges deliver consistent measurements across different operators and cycles.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com