High-precision caliper gauges for rapid, repeatable measurements
Specialist caliper gauges and quick-test probes deliver fast, reliable geometry checks in production, incoming inspection and workshop use by mechanically or digitally capturing hard-to-reach features such as deep internal grooves, bore depths, tube wall thicknesses and freeform surfaces. Their spring-loaded lever mechanism ensures a defined contact force for absolutely repeatable results independent of the operator, while ergonomic designs allow one-handed operation with the workpiece remaining in the machine or on the inspection table. Available in a range of contact shapes and probe arm geometries, these precision calipers include analogue dial options for robust continuous use and digital models with tolerance signalling and data interfaces for seamless integration into quality control systems.
400-1000mm Internal Dial Bore Gauge Carbide Measuring Faces 0.001mm Resolution, 440mm Depth - Microtech Metrology
Take advantage of the combination of wide measuring range, carbide measuring faces and a deep measuring capacity for reliable internal inspections of large components; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Internal fine measuring instrument — analogue internal bore gauge, 400–1,000 mm range with carbide measuring faces (Microtech Metrology) An Internal fine measuring instrument designed for precise internal diameter checks in heavy machining and toolroom environments, covering bores from 400 to 1,000 mm with a measuring depth of 440 mm. Large 400–1,000 mm measuring range Carbide measuring faces for wear resistance Measuring depth 440 mm for deep bores High repeatability with 0.012 mm accuracy Reliable measurements for large bores The gauge is engineered to deliver consistent internal measurements across a broad span of diameters. With a measuring range of 400–1,000 mm and a measuring depth of 440 mm, the design suits inspection tasks on housings, large bearings and heavy assemblies where single‑point checks are insufficient. The instrument’s analogue dial provides an immediate reading that is simple to interpret on the shop floor; the specified accuracy of 0.012 mm offers the precision required for many quality control routines without the complexity of electronic systems. This restricts rework and reduces inspection time by giving clear, repeatable values for process decisions. Durable contact points that minimise wear Contact reliability is critical when measuring large bores repeatedly. The device features carbide measuring faces, which resist abrasion and maintain geometry under frequent use. This hardness increases service life and ensures that measurement reference surfaces stay true over extended production runs, translating into lower lifetime costs and fewer calibration cycles. For workshops that prioritise uptime, the robust contact material reduces the risk of drift and preserves measurement integrity even under demanding conditions. Practical workflow advantages in the workshop The analogue construction favours a straightforward workflow: the dial reads out changes directly, there are no batteries to replace, and the mechanical simplicity helps maintain operation in harsher environments. The instrument’s long-range format is balanced to keep handling manageable while still providing the reach necessary for large components; operators benefit from a tool that combines reach with stiffness, helping to avoid deflection errors during measurement. Cleaning and basic maintenance are quick, so the device can be returned to service fast between inspection batches. Application fit and inspection strategy Classified for long-range internal measurement tasks, this instrument is particularly useful in heavy machining, housing inspection and toolroom set-ups where large bore accuracy matters. The combination of 0.012 mm accuracy and carbide contacts makes it suitable as a shop-floor standard for production checks and incoming inspection of large parts. Where traceable calibration records are required, Metav Werkzeuge can advise on suitable calibration pathways and frequency to match the facility’s quality plan, ensuring the measurement results integrate reliably into existing QA procedures. Contact Metav Werkzeuge for tailored application advice on Microtech Metrology’s internal fine measuring instrument and to discuss delivery and inspection planning – info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 132900800 GTIN: 4061905453946 Manufacturer: Microtech Metrology Facts Measuring range: 400–1,000 mm Measuring depth: 440 mm Accuracy: 0.012 mm Dial indicator: analogue Special features Carbide measuring faces Analogue dial display Suited for large-diameter internal measurements Long-range class (500–1,000 mm) FAQ What internal diameters can be measured with this instrument? The instrument measures internal diameters from 400 mm up to 1,000 mm, making it suitable for large bores and assemblies when using Microtech Metrology’s internal fine measuring instrument. How precise is the reading and how reliable is it for production checks? The gauge offers an accuracy of 0.012 mm; this level of precision supports reliable production checks and repeatable quality control on large components. Are the measuring faces resistant to wear from repeated use? Yes, the measuring faces are made from carbide, which provides high abrasion resistance and helps maintain contact geometry during extensive shop‑floor use. Is an electronic data output available for integration into measurement systems? This model is an analogue gauge with a dial indicator; no electronic data output is provided for this variant. Can the instrument be used for inspection of bearings and housings? The long measuring range and 440 mm measuring depth make the instrument well suited for bearings, housings and other large assemblies that require internal diameter checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400-1000mm Internal Fine Measuring Gauge With Retractable Measuring Head, Colour Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise large‑format measurement, easy data transfer and an included ISO 17025 calibration certificate to ensure reproducible inspection results and smooth process control. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Internal Fine Measuring Instrument with 1.5" colour touchscreen and wireless + USB outputs — Microtech Metrology The Internal Fine Measuring Instrument is a digital, large‑range gauge designed for internal measurements on sizeable components in toolrooms and production inspection. ISO 17025 calibrated with certificate Measuring range 400–1,000 mm for large parts Colour 1.5" touchscreen display Wireless and USB data output for traceable transfer Reliable precision for large components The instrument delivers repeatable results thanks to a resolution of 0.0001 mm combined with a practical accuracy rating of ±0.035 mm, which supports stable in‑process checks and reduces rework. Classified as a large‑format caliper (suitable for measuring ranges up to 1,000 mm), the device maintains stiffness over its span so measurements remain comparable across batches. The built‑in measuring depth of 5,000 mm extends access to recessed features, while the retractable measuring head simplifies engagement with bores and internal cavities. This mix of fine resolution and mechanical accessibility makes it suited to quality control in jigs, housings and larger machined parts. Seamless data transfer and documented traceability Connectivity is tailored to modern inspection workflows: wireless transfer plus USB output enable direct logging into inspection software and secure data capture for SPC purposes. The 1.5" colour touchscreen provides immediate visual feedback and simple on‑screen controls, shortening cycle time at the measuring station. Delivery includes an ISO 17025 calibration certificate, which verifies that the instrument has been calibrated to a recognised laboratory standard. This certification supports audit requirements and simplifies acceptance in regulated environments, giving measurable provenance to every reading. Ergonomic handling and practical workshop support Handling is optimised for single‑operator use: the retractable measuring head reduces the need for awkward probe angles, and the compact display and controls let operators stay focused on the workpiece rather than on complex menus. A support set is included with the instrument to aid setup and safe transport between inspection points. Built with the workshop in mind, the device balances long‑range capability with a layout that minimises operator error and improves throughput during serial checks or fixture set‑ups. For detailed application advice, calibration records or to arrange a demonstration of measurement compatibility, contact Metav Werkzeuge in Emmerich so our consultants can review the Microtech Metrology internal fine measuring instrument and its ISO 17025 calibration certificate with the exact inspection plan in mind. Technical data Article number: 131990750 GTIN: 4061905044557 Manufacturer: Microtech Metrology Facts Measuring range: 400–1,000 mm Measuring depth: 5,000 mm Resolution: 0.0001 mm Accuracy: ±0.035 mm Display: Colour 1.5" touchscreen Special features Data output: Wireless + USB Retractable measuring head Digital instrument for internal measurements Accessories included: Support set Supplied with ISO 17025 calibration certificate FAQ What measuring range does this instrument cover? The instrument covers a measuring range from 400 mm to 1,000 mm, making the Microtech Metrology internal fine measuring instrument well suited to large bores and internal features. Is the instrument delivered calibrated? Yes — the device is supplied fully calibrated to ISO 17025 and includes the calibration certificate with the delivery. What data outputs are available for integration with inspection software? Data can be exported via wireless connection or USB, enabling straightforward capture of readings from the Microtech Metrology gauge into quality management systems. How fine is the measurement resolution and what accuracy can be expected? The instrument offers a resolution of 0.0001 mm and an accuracy of approximately ±0.035 mm, providing a balance between fine reading capability and robust shop‑floor use. Are accessories included to help with set‑up? A support set is included with the instrument to assist with mounting, alignment and safe handling during measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400-1000mm Internal Micrometer 1.5" Colour Touchscreen, Wireless+USB, ISO 17025 Calibrated - Microtech Metrology
Benefit from laboratory-grade traceability and practical workshop integration: the instrument combines ISO 17025 calibration with repeatable 0.025 mm accuracy and both Wireless and USB data transfer for seamless measurement logging. Order the device directly via Metav Werkzeuge or consult our technical advisors for application support. Internal Precision Gauge — 400–1000 mm range, 1.5" colour touchscreen, Microtech Metrology The Internal Precision Gauge is a digital internal measuring system designed for large-range internal measurements and workshop‑level quality control with laboratory calibration. Measuring range 400–1000 mm Accuracy 0.025 mm for repeatable results ISO 17025 calibration with certificate Wireless and USB data transfer 1.5" colour touchscreen display Traceable accuracy that reduces rework and inspection time The instrument delivers a verified 0.025 mm accuracy, a level suited to demanding production checks and first‑article inspection. Calibrated according to ISO 17025, the device is supplied with a calibration certificate, which supports audit trails and quality documentation. The relatively high resolution of 0.0001 mm (displayed) allows fine discrimination in comparative and pass/fail checks, while the documented accuracy reduces ambiguous decisions and the need for repeat measurements. Engineered for long internal spans with workshop practicality With a measuring range of 400–1000 mm, this model falls into the category for larger internal workpieces where profile stiffness and handling matter. The design is optimised for stable measurements across extended spans, providing reproducible results on long bores, housings or fixture components. A two‑module arrangement enables modular measurement setups without compromising alignment, and the listed measuring depth of 3000 mm supports applications requiring deeper reach into assemblies. Connectivity and operation that speed up data workflows Equipped with both Wireless and USB outputs, the gauge integrates directly into digital inspection routines and SPC systems, reducing manual transcription errors and accelerating data capture. The 1.5" colour touchscreen simplifies mode selection and readout visibility on the shop floor, while the digital electronics enable rapid measurement cycles and straightforward export of measurement logs. These features translate into shorter inspection loops and clearer process control for production environments. For ISO‑traceable internal measurement solutions or integration advice, contact Metav Werkzeuge in Emmerich to discuss suitability and ordering options. Technical data Article number: 131900745 GTIN: 4061905043482 Manufacturer: Microtech Metrology Facts Measuring range: 400–1000 mm Accuracy: 0.025 mm Display resolution: 0.0001 mm Measuring depth: 3000 mm Modules: 2 Data output: Wireless, USB Display: 1.5" colour touchscreen Calibration: ISO 17025 certificate included Special features Digital internal measuring instrument Two‑module configuration for modular setups Wireless data transmission for integration USB interface for direct logging Supplied with laboratory calibration certificate FAQ What is the supplied calibration status of the instrument? The Internal Precision Gauge is delivered fully calibrated with an ISO 17025 calibration certificate, confirming laboratory traceability. Which measurement range does the device cover and for what applications is it suited? The device covers 400–1000 mm, making it suitable for large internal diameters such as housings, bores and long fixture components where reproducible long‑span measurements are required. How precise are the readings and what resolution is shown on the display? The instrument provides an accuracy of 0.025 mm and a display resolution of 0.0001 mm, enabling fine discrimination in quality checks and inspection tasks. Can measurement data be exported directly to a PC or SPC system? Yes, the gauge offers Wireless and USB outputs to transfer measurement data directly into inspection software or statistical process control systems. Is the instrument modular and adaptable for different measurement setups? The model features a two‑module configuration that supports modular setups and flexible alignment, aiding measurement of varied internal geometries. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400-1000mm Internal Micrometer Carbide Measuring Faces 440mm Measuring Depth Color Touchscreen Wireless/USB - Microtech Metrology
Benefit from a 400–1000 mm measuring range, 0.012 mm accuracy and robust carbide measuring faces for repeatable internal measurements; order via Metav Werkzeuge or contact our consultants for tailored advice. Internal Precision Gauge – Microtech Metrology | 400–1000 mm, 0.012 mm accuracy Internal Precision Gauge designed for precise internal and step measurements across medium to large components, combining a long reach with data-ready connectivity for efficient quality workflows. Large measurement range up to 1000 mm High repeatability 0.012 mm accuracy Carbide measuring faces for wear resistance Wireless and USB data output Long reach for internal and stepped measurements The instrument provides a measuring range of 400–1000 mm with a measuring depth of 440 mm, positioning it in the large-range class of precision calipers. This reach is particularly useful when working on sizeable bores, housings or deep recesses where standard workshop calipers lack range. The longer beam is engineered to preserve rigidity over its span, so measurements remain reproducible across the full travel. The result is a single tool that replaces multiple shorter gauges, reducing handling time and the error potential inherent in repeated set-ups. Accuracy and wear resistance for reliable quality control With an declared accuracy of 0.012 mm, the instrument meets the demands of routine quality control and medium-precision machining tasks. The contact surfaces are fitted with carbide measuring faces, which resist wear and maintain form under frequent use, preserving measurement integrity over time. For workshop staff this translates into fewer recalibrations and a steadier baseline for process control; for planners it means improved traceability and consistent part acceptance rates. Integrated data capture to speed inspection workflows Equipped with Wireless + USB data output and a 1.54" colour touchscreen, the gauge simplifies digital capture and transfer of readings. Direct data transfer reduces manual transcription, lowering the risk of logging errors and speeding handover to SPC or MES systems. The touchscreen provides clear visual feedback and quick mode adjustments, while the connectivity options support both mobile logging via wireless links and secure file-based exports over USB for traceable documentation. Robust design and versatile application Built for regular use in toolrooms, mould shops and assembly operations, the device blends mechanical stability with practical features that ease handling in confined spaces. The combination of extended range, durable carbide faces and a clear display makes it suitable for inspection of internal geometries, stepped features and medium-sized assemblies. The construction favours steady positioning during measurement, helping operators achieve consistent contact conditions and repeatable results across production runs. Contact Metav Werkzeuge for expert advice and fast delivery of the Microtech Metrology internal precision gauge with carbide faces and wireless data transfer Technical data Article number: 132900700 GTIN: 4061905453649 Manufacturer: Microtech Metrology Facts Measuring range: 400–1000 mm Measuring depth: 440 mm Accuracy: 0.012 mm Readout resolution: 0.0001 mm Special features Carbide measuring faces Wireless + USB data output Colour 1.54" touchscreen Analogue and digital readout FAQ What is the usable measurement range of this instrument? The usable range extends from 400 mm up to 1000 mm, making the internal precision gauge well suited to larger bores and deep recesses. How precise are the readings from this instrument? The device offers an accuracy of 0.012 mm, which is adequate for standard workshop quality control and most machining inspection tasks. Are the measuring faces durable enough for daily shop use? Yes, the measuring faces are made from carbide, which significantly improves wear resistance and long-term repeatability of measurements. How can measurement data be exported for statistical analysis? Data can be exported wirelessly or via USB for straightforward integration into SPC or MES systems, enabling efficient documentation and traceability. Which model should be ordered for this specification? Order the Microtech Metrology internal precision gauge, SKU 132900700, for the 400–1000 mm range and the features described above. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400-1000mm Internal Micrometer Digital Touchscreen Wireless+USB, ISO 17025 Calibrated - Microtech Metrology
Benefit from the combination of reliable ISO 17025 calibration, robust 400–1000 mm measuring capacity and fast data transfer via Wireless + USB to keep inspection cycles consistent. Order directly via Metav Werkzeuge or consult our specialists for configuration and traceable delivery. Internal precision gauge (digital inside measuring instrument) – 400–1000 mm, Microtech Metrology The Internal precision gauge is a digital inside measuring instrument designed for bore and internal dimension control in production, jig making and quality inspection. Colour 1.5" touchscreen display Wireless + USB data output Measuring range 400–1000 mm Delivered with ISO 17025 calibration certificate High‑throughput measurement with traceable results This digital inside measuring instrument brings laboratory‑grade traceability to workshop environments by combining a wide measuring span with rapid data capture. The 400–1000 mm range places the gauge in the large‑format measuring class, making it suitable for bores, housings and mould components that require consistent reproducibility. With ISO 17025 calibration included and a supplied calibration certificate, measurement results are auditable and suitable for incoming inspection or final quality records. The instrument’s resolution 0.0001 mm and stated accuracy ±0.03 mm ensure measurements are both fine enough for process control and robust for routine production use. Streamlined data handling for efficient quality workflows Data transfer is simplified by the Wireless + USB interfaces, enabling direct integration into SPC routines or measurement software without repeated manual entry. A compact colour 1.5" touchscreen provides immediate visual confirmation of readings and reduces set‑up time at the machine or bench. These features reduce cycle time and human error, so staff can concentrate on analysis rather than transcription. The device’s modern output options are particularly useful for automated logging in traceability chains and for rapid batch sampling during production checks. Built for demanding internal measurements and large parts Mechanically, the unit is optimised for internal dimension tasks across larger components: the measuring depth specification supports deeper bores and stepped internal features while preserving stability over the working length. The construction and measurement concept favour reproducible results on medium to large parts encountered in toolmaking, fixtures and heavy machining. As a calibrated, digital inside measuring instrument from Microtech Metrology, it balances reach, ease of handling and the robustness required on the shop floor. Practical benefits and integration guidance Choosing this instrument delivers two clear practical advantages: traceable calibration for compliance and quality assurance, and direct data export to reduce administrative overhead. For workshops seeking to upgrade inspection routines, the gauge works well as a primary check tool for bore control or as a portable verification instrument for assemblies. Integration with measurement software is straightforward via USB, while the wireless option supports more flexible setups where tethering is impractical. Discuss Microtech Metrology’s internal precision gauge with Metav Werkzeuge to specify the ideal configuration for the application and receive the ISO 17025 calibration certificate with delivery Technical Data Article number: 131900755 GTIN: 4061905043789 ECLASS: 21170310 Facts Measuring range: 400–1000 mm Measuring depth: 5000 mm Accuracy: ±0.03 mm Resolution: 0.0001 mm Special features Digital: colour 1.5" touchscreen display Data output: Wireless + USB Calibrated to ISO 17025; calibration certificate included Manufacturer: Microtech Metrology FAQ What is the certified accuracy of this internal gauge? The instrument is supplied with an accuracy of ±0.03 mm and includes an ISO 17025 calibration certificate confirming the stated performance. Which measuring range does the gauge cover? The device covers a measuring range of 400–1000 mm, suited to large bores, housings and medium‑sized assemblies. How are measurement results exported for SPC systems? Measurement data can be exported via Wireless + USB, allowing direct transfer into SPC or measurement software without manual entry. Is a calibration certificate supplied with delivery? Yes, the gauge is delivered fully calibrated and includes an ISO 17025 calibration certificate. Who manufactures this instrument and what is the article number? The instrument is produced by Microtech Metrology and the article number is 131900755. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400-1000mm Internal Micrometer With Carbide Measuring Faces, 0.03mm Accuracy - Microtech Metrology
Take advantage of the combination of carbide measuring faces, an extended measuring range and reliable analogue indication for reproducible internal measurements across medium-to-large components; order the internal precision gauge directly via Metav Werkzeuge or consult our specialists for application advice. Internal precision gauge (analogue) by Microtech Metrology — carbide measuring faces, 400–1,000 mm The internal precision gauge is an analogue fine measuring instrument designed for accurate internal and bore measurements in machine shops and production inspection, offering durable carbide measuring faces and a wide measuring range for components up to 1,000 mm. Analogue dial with 0.01 mm reading Carbide measuring faces for wear resistance Measuring range 400–1,000 mm Suitable for deep bores up to 2,000 mm Repeatable accuracy for production quality The analogue instrument combines a clear analogue dial with a 0.01 mm graduation and an overall accuracy of ±0.03 mm, delivering repeatable results for batch inspection and set-up tasks. The mechanical design minimises thermal and electronic variability, which supports stable measurements across shifts. With carbide measuring faces the contact points resist wear, reducing drift over time and lowering the frequency of rework or part rejection; this translates into predictable throughput and fewer stoppages on the shop floor. Designed for large internal diameters and deep bores Built for the large caliper class (measuring range 400–1,000 mm), this instrument closes the gap between standard bench gauges and long‑span inspection tools. A measuring depth of 2,000 mm makes it suitable for deep bores, stepped housings and fixtures where access is limited but precision remains critical. The robust scale and guiding provide the stiffness needed for these lengths, so measurements remain reproducible when handling extended probes or inserts in jigs and assemblies. Durable construction and workflow benefits Durability and serviceability are central to the instrument’s design: carbide measuring faces resist abrasion when contacting harder alloys, and the analogue mechanism is forgiving in harsh shop environments. The resulting benefit is reduced maintenance overhead and consistent dimensional control during series production. Metav’s role as a European quality filter ensures this tool arrives with the documentation and supply reliability expected by industrial users, supporting both small workshops and larger production facilities with a focused metrology offering. Contact Metav Werkzeuge in Emmerich for a technical consultation or a tailored quotation on Microtech Metrology’s internal precision gauge and its integration into existing inspection processes Technical data Article number: 132900144 GTIN: 4061905454042 Manufacturer: Microtech Metrology Category: Fine measuring instruments Facts Measuring range: 400–1,000 mm Measuring depth: 2,000 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Analogue indication Special features Carbide measuring faces Analog mechanical construction Suited to large internal measurements SKU: 132900144 FAQ What accuracy can be expected from this gauge? The internal precision gauge offers an accuracy of ±0.03 mm with a 0.01 mm dial graduation, suitable for routine industrial inspection and setup tasks. Is this instrument suitable for deep bores and long reaches? Yes, the instrument supports a measuring depth of 2,000 mm and a measuring range up to 1,000 mm, making it appropriate for deep bores and long internal features. Are the measuring faces durable for contact with hardened parts? The tool is equipped with carbide measuring faces, which provide high wear resistance and long service life when contacting harder materials. Which workshop applications is this instrument intended for? Designed for machine shops, tooling and fixture inspection, the gauge is aimed at internal diameter checks, stepped bore measurements and component verification within the 400–1,000 mm range. What brand and SKU identify this product for ordering? This internal precision gauge is supplied by Microtech Metrology, catalogue SKU 132900144, and is listed under fine measuring instruments for industrial use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400-1000mm Internal Micrometer With Carbide Measuring Faces, Analog Dial 0.001mm Accuracy - Microtech Metrology
Take advantage of the combination of carbide measuring faces, a 400–1,000 mm measuring range and fine dial resolution for dependable large‑bore inspection results; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Internal precision gauge — large‑bore measuring instrument with carbide faces and fine dial indicator (Microtech Metrology) The Internal precision gauge is an analogue inside‑measuring instrument for large diameters, tailored for shop‑floor inspection and fixture metrology across medium to heavy engineering applications. Carbide measuring faces for long life Fine 0.001 mm dial resolution Wide 400–1,000 mm measuring range Robust construction for workshop use Durable contact surfaces that lower lifetime costs The gauge is equipped with carbide measuring faces, offering high wear resistance and consistent contact geometry over extended use. This hard contact material reduces the need for frequent rework of the measuring tips and maintains repeatable measurements on production batches, which translates into lower maintenance effort and fewer downtime interruptions. The rugged contact design is particularly beneficial where abrasive or finishing operations produce surface variations that would otherwise accelerate tool wear. Precise large‑diameter measurement for reliable QC decisions Designed for a measuring range of 400–1,000 mm and classified in the Mit Gross segment, this instrument provides a balance of reach and stability for large bores and housings. The analogue dial offers a fine reading step of 0.001 mm, while the stated measurement accuracy of 0.012 mm supports routine dimensional control in machining and assembly chains. For quality managers, this combination enables clear go/no‑go decisions and reduces the incidence of rejects caused by measurement uncertainty. Practical design for in‑process inspection and traceable routines With a measuring depth of 1,000 mm and a robust mechanical dial indicator, the instrument is built for repetitive in‑process checks and bench measurements. The simple, tactile operation of the dial indicator streamlines inspection sequences and shortens set‑up time compared with more complex electronic systems, making it well suited for busy workshop conditions. Stiff construction and clear mechanical feedback support consistent measuring force and thus improved reproducibility across operators. Confidence through European supply and metrology expertise Sourced from Microtech Metrology and supplied via Metav’s European distribution, the instrument benefits from a transparent supply chain and specialist aftermarket support. Metav’s position as a precision partner for industry and trade, combined with long experience in metrology distribution, offers reassurance on availability and replacement parts. The overall package suits production environments that demand robust large‑bore measurement with straightforward, repeatable results. For purchasing, technical clarification or application matching of the Microtech Metrology internal precision gauge, contact Metav Werkzeuge — Metav’s specialists in Emmerich can advise on suitability and delivery options. Technical Data Article number: 132900822 GTIN: 4061905453953 Manufacturer: Microtech Metrology Facts Measuring range: 400–1,000 mm Measuring depth: 1,000 mm Resolution: 0.001 mm Accuracy: 0.012 mm Special features Carbide measuring faces Analogue dial indicator Classification: Mit Gross (large‑scale internal measurement) ECLASS: 21170310 FAQ What measuring range does the instrument cover? The instrument measures from 400 to 1,000 mm and is intended for large‑bore internal inspections. What resolution and accuracy are provided? The dial indicator gives a resolution of 0.001 mm with an indicated accuracy of 0.012 mm for routine shop‑floor control. Are the contact faces durable for production use? Yes, the gauge uses carbide measuring faces designed for long service life in repetitive measurement tasks. Is this instrument suitable for fixture and housing inspection? The large measuring depth of 1,000 mm and the 400–1,000 mm range make it suitable for fixture, housing and large‑component measurements. Which product and SKU should be referenced when ordering? Reference the Microtech Metrology internal precision gauge, SKU 132900822, when enquiring or ordering. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400-1000mm Internal Micrometer With Carbide Measuring Faces, Colour Touchscreen Display, Wireless/USB - Microtech Metrology
Take advantage of precise, wear-resistant measurement for large bores: the combination of carbide measuring faces, a 400–1000 mm measuring range and Wireless+USB data transfer ensures reproducible in-process inspection and fast data capture. Order the instrument via Metav Werkzeuge or request detailed specification support from our consultants. Internal Precision Bore Gauge — carbide faces, Wireless+USB (Microtech Metrology) Internal Precision Bore Gauge is a precision instrument for contact measurement of large internal diameters in workshop and production environments, designed for reliable, repeatable bore inspection. Carbide measuring faces for long service life Measuring range 400–1000 mm for large bores Resolution 0.0001 mm; accuracy ±0.012 mm Colour touchscreen plus Wireless and USB output Reproducible measurement where tolerances matter The gauge combines a robust measuring mechanism with a high readout resolution of 0.0001 mm and an stated accuracy of ±0.012 mm, making it suitable for quality control on large internal diameters. The carbide measuring faces resist wear during repeated contact checks, which preserves measurement reliability over time and reduces the need for frequent rework. For production lines and inspection benches this means fewer rejects and consistent compliance with tolerance chains. Streamlined data capture and traceability A clear 1.54" colour touchscreen and integrated data interfaces (Wireless and USB) speed up documentation and link the measuring process to SPC or inspection software. The instrument supports fast transfer of measured values and logging without manual transcription, improving throughput in routine checks. The hybrid design pairs a dependable mechanical measuring principle with contemporary digital convenience, helping to standardise procedures and reduce operator-related variance. Built for workshop handling and large components With a measuring range of 400–1000 mm and a measuring depth of 2000 mm, this bore gauge addresses inspection tasks in fixture building, mould and die work, and pipe or cylinder production where long reach is required. The combination of robust construction, wear-resistant contact faces and a tactile display ensures the device is both durable and user-friendly on the shop floor. Metav’s supply chain quality filter and stock in Emmerich make the instrument a pragmatic choice for firms wanting dependable delivery and consistent specification. For reliable large-bore inspection and fast data integration, contact Metav Werkzeuge to source the Microtech Metrology Internal Precision Bore Gauge with carbide measuring faces and Wireless+USB output. Technical Data Article number: 132900744 GTIN: 4061905453809 Brand: Microtech Metrology Category: Fine measuring instruments Analog readout: yes Digital display: Colour 1.54" touchscreen Data output: Wireless + USB Facts Measuring range: 400–1000 mm Measuring depth: 2000 mm Resolution (reading): 0.0001 mm Accuracy: ±0.012 mm Special features Carbide measuring faces Hybrid analogue and digital design Workshop-suitable construction for large bores FAQ What internal diameters can be measured with this gauge? The Internal Precision Bore Gauge from Microtech Metrology covers a measuring range of 400–1000 mm, suitable for large bores in tooling and component manufacture. How precise is the instrument in daily use? The instrument provides a reading resolution of 0.0001 mm with a stated accuracy of ±0.012 mm, which supports consistent quality checks on production parts. How are measured values exported for documentation? Measured values can be exported via the gauge’s Wireless interface or through USB, allowing integration into inspection logs or SPC systems. Are the contact faces durable for repetitive use? Yes, the unit is fitted with carbide measuring faces, offering high wear resistance and extended service life for frequent contact measurements. For which applications is this bore gauge intended? Typical uses include inspection of large bores in fixture and mould making, pipework and cylinder components where a measuring depth up to 2000 mm and long-range accuracy are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400-1000mm Internal Micrometer With Retractable Anvil, Colour Touchscreen Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of wide measuring range, high display resolution and ISO 17025 traceable calibration for dependable in‑house inspection. Order the calibrated instrument directly via Metav Werkzeuge or contact the consultants for application advice. Microtech Metrology Internal Fine Measuring Instrument – 400–1000 mm, 1.5" colour touchscreen The Internal Fine Measuring Instrument is a digital internal gauge designed for large‑bore measurements in machine shops and quality control departments Retractable measuring head for confined bores 1.5" colour touchscreen for clear readout Wireless + USB data output for process integration ISO 17025 calibrated, certificate included Reliable performance for large internal measurements The instrument is engineered for the measurement range 400–1000 mm, a class that addresses large components where beam stiffness and repeatability matter. Placing the device in the large‑format category means its mechanical design prioritises low deflection across the span, so operators obtain consistent readings on bores, housings and large fixtures. The retractable measuring head maintains accessibility in confined geometries, while the robust frame reduces user‑induced error and supports reproducible inspection cycles. Precise readout and traceable results for production control With a resolution of 0.0001 mm and a stated accuracy of ±0.04 mm, the gauge supplies high‑precision values suitable for dimensional control and process checks. The 1.5" colour touchscreen presents measurements clearly and minimises interpretation time; simultaneous Wireless + USB outputs enable direct capture into SPC or inspection software, reducing transcription errors and accelerating trend analysis. Delivered with an ISO 17025 calibration certificate, the device supports audit requirements and quality documentation without additional calibration steps. Practical handling and workshop integration Designed for shop‑floor use, the instrument includes a support set for secure handling and safe storage between operations. The retractable head simplifies positioning inside deep bores, and the instrument’s interface reduces training time for technicians. Integration into existing workflows is supported by standardised data outputs, allowing immediate logging of inspection data and quicker feedback to production — a clear benefit for labs and workshops seeking to shorten non‑conformance reaction times. Contact Metav Werkzeuge for technical consultation and to request the ISO 17025‑calibrated Internal Fine Measuring Instrument from Microtech Metrology; Metav Werkzeuge will advise on measurement strategy and delivery from their Emmerich facility Technical data Article number: 131990770 GTIN: 4061905044564 Manufacturer: Microtech Metrology Data Measurement range: 400–1000 mm Measuring depth: 7000 mm Resolution: 0.0001 mm Accuracy: ±0.04 mm Display: Color 1.5" Touchscreen Special features Retractable measuring head Data output: Wireless + USB Delivered with support set ISO 17025 calibration with certificate FAQ What is the calibrated accuracy of the instrument? The instrument is supplied calibrated to ISO 17025 standards; the stated accuracy is ±0.04 mm and the calibration certificate is included with delivery. Can measurement data be exported directly to quality software? Yes, the device supports Wireless + USB data output for direct transfer into SPC and inspection systems, facilitating automated logging. Is this instrument suitable for deep bores and large housings? The measuring range of 400–1000 mm and the retractable measuring head make the gauge suitable for large bores, housings and components that require low‑deflection measurement over extended spans. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400-1000mm Internal Precision Gauge Carbide Measuring Faces, Color 1.54" Touchscreen, Wireless/USB - Microtech Metrology
The provided product data contain contradictory technical details that prevent the generation of a reliable product description. The dataset simultaneously indicates an analogue measuring configuration while also specifying a colour touchscreen display and wireless/USB data output, which is inconsistent for a single instrument. In addition, the reported measurement resolution and stated accuracy appear mismatched, leaving the operational capability unclear. To ensure a safe, accurate and standards-compliant product text, please review and correct the source information—specifically clarify whether the instrument is analogue, digital or a hybrid, and confirm the exact measurement resolution, accuracy and data‑output options. Once the data are consistent, a full product description can be produced promptly.
40–60mm Internal Quick Bore Gauge 0.01mm Resolution, Rounded Tips, Plastic Case - Metav IndustryLine
Take advantage of the combination of 0.01 mm resolution, a 40–60 mm measuring range and rounded probe tips for fast, repeatable internal measurements; the unit is supplied in a protective case for secure transport. Order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Metav IndustryLine Internal dial indicator M209.035 – 40–60 mm, 0.01 mm resolution The Internal dial indicator M209.035 is a compact analogue gauge designed for rapid internal measurement of bores, grooves and similar features in workshop and production settings. Internal dial indicator »M209.035« by Metav IndustryLine Measuring range 40–60 mm with 0.01 mm graduation Rapid bore and slot measurement with rounded tips Supplied in protective case for secure transport Precision where it counts The instrument delivers a clear 0.01 mm reading and an operational accuracy of ±0.03 mm, providing a dependable balance between sensitivity and robustness for routine inspection work. The analogue dial ensures instantaneous visual feedback without reliance on batteries or electronics, which can simplify inline checks and reduce downtime. With these specifications the gauge supports rapid quality assessments in small-batch production and maintenance operations, helping to keep tolerance control both efficient and verifiable. Faster inspections for internal features Designed specifically for quick measurement of bores and slots, the gauge covers a 40–60 mm measuring band that suits many common internal dimensions. The R0.5 mm rounded probe tips glide into holes and grooves with minimal setup, enabling consistent contact and reduced measuring time per feature. This configuration is particularly useful for component checks during machining pauses or for repetitive inspection tasks where throughput and repeatability are priorities. Built for workshop use and transport Constructed with robust components and a compact form factor, the indicator is easy to handle and store. Supplied in a protective case, the instrument is ready for safe transport between workstations or jobsites and arrives ready for immediate use. The modest 0.8 kg weight balances stable handling with convenient portability, making it straightforward to include in tool sets for inspectors and machinists alike. Practical integration into quality routines The analogue design and straightforward measuring range mean the gauge integrates smoothly into existing quality-control workflows. Its rapid-read dial and tactile probe tips reduce cognitive load during repeated inspections and help maintain consistent measuring technique across operators. Use of the instrument supports faster decision-making on the shop floor and complements digital or statistical systems used for batch acceptance without adding unnecessary complexity. Contact Metav Werkzeuge for tailored advice on how the M209.035 can be deployed in production — our team in Emmerich provides expert recommendations and fast supply solutions Technical data Article number: M209.035 GTIN: 4061905045950 Category: Dial gauges Facts Measuring range: 40–60 mm Reading: 0.01 mm Accuracy: ±0.03 mm Weight: 0.8 kg Special features Analogue dial indicator Probe tips R0.5 mm (rounded) Supplied in transport case Rapid internal measurement for bores and slots FAQ What measuring range does this indicator cover? The internal dial indicator M209.035 covers a measuring range of 40–60 mm, suited to common bore and groove inspections. What resolution and accuracy can be expected? The instrument provides a reading resolution of 0.01 mm and an operational accuracy of ±0.03 mm, making it suitable for standard workshop quality control. Are the probe tips suitable for narrow grooves? Yes, the probe tips have a rounded radius of 0.5 mm (R0.5 mm), which facilitates entry into grooves and bores while maintaining consistent contact. Is the gauge ready for transport and storage? The M209.035 is supplied in a protective case for secure transport and storage, ensuring the gauge arrives ready for immediate use in the workshop. Which brand and SKU should be referenced when ordering? Refer to Metav IndustryLine, internal dial indicator M209.035, SKU M209.035 when enquiring or placing an order. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
480-780mm Internal Micrometer With Retractable Anvil, Colour 1.54" Touchscreen Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 traceability, high shop-floor connectivity and a wide measuring span to speed up internal bore inspection and strengthen quality documentation. Order the ISO‑calibrated instrument directly via Metav Werkzeuge or consult their specialists for integration advice. Internal precision gauge — Internal bore gauge with 480–780 mm range and wireless + USB data output (Microtech Metrology) The Internal precision gauge is a digital internal measuring instrument designed for bore inspection in machining and quality control environments. ISO 17025 calibrated with certificate Wireless and USB data output 480–780 mm measuring range 0.025 mm measurement accuracy Repeatable accuracy with documented traceability The instrument delivers ±0.025 mm measurement accuracy with a fine resolution of 0.0001 mm, providing a verifiable basis for pass/fail decisions and process control. Because the device is ISO 17025 calibrated, each delivery includes a formal calibration certificate that supports audit requirements and quality records. This level of documented precision reduces rework and supports consistent production tolerances when inspecting bores and internal features. Faster inspection through reliable data transfer Equipped with Wireless and USB outputs and a colour 1.54" touchscreen, the unit streamlines data capture and transfer to inspection software or production databases. The digital interface shortens cycle times compared with manual recording, enabling immediate logging of measured values and reducing transcription errors. Integration into existing measurement routines improves throughput while maintaining traceable measurement records. Practical span and depth for medium-sized components With a measuring span of 480–780 mm and a measuring depth of 400 mm, the device suits medium‑sized bores common in fixtures, housings and assemblies. The combination of range and depth keeps a single instrument useful across several production stages, lowering tool changeovers and simplifying inventory. The robust digital design aids consistent measurement under workshop conditions and supports routine quality checks without complex fixtures. Operational benefits for machinists and QC teams Beyond technical performance, the calibrated digital instrument promotes confidence in inspection results and speeds up decision-making on the shop floor. Clear visual feedback on the colour touchscreen and standardised data interfaces enable quicker training for operators and easier handover between shifts. The product from Microtech Metrology thus contributes to a measurable improvement in inspection efficiency and process reliability. Contact Metav Werkzeuge in Emmerich to discuss delivery of the ISO 17025‑calibrated Microtech Metrology internal precision gauge and to arrange technical details for system integration Technical Data Article number: 139780700 GTIN: 4061905452871 Manufacturer: Microtech Metrology Digital display: Colour 1.54" touchscreen Data output: Wireless + USB Measuring range: 480–780 mm Measuring depth: 400 mm Accuracy: 0.025 mm Resolution: 0.0001 mm Calibration: ISO 17025 certificate included Facts Measuring range: 480–780 mm Measuring depth: 400 mm Accuracy: ±0.025 mm Resolution: 0.0001 mm Display: 1.54" colour touchscreen Interfaces: Wireless, USB Digital instrument: yes Special features ISO 17025 calibration certificate included Wireless and USB data transfer Colour 1.54" touchscreen interface Suitable for internal bore measurement SKU: 139780700 GTIN: 4061905452871 FAQ Is the instrument delivered calibrated? Yes. The internal precision gauge is supplied fully calibrated under ISO 17025, and a calibration certificate is included with the delivery. Which data interfaces are available for measurement logging? The device provides Wireless and USB outputs for straightforward data transfer to QA software or production databases. What measuring span and depth does the instrument cover? The measuring span is 480–780 mm with a measuring depth of 400 mm, suitable for medium‑sized bores and housings. What accuracy and resolution can be expected in routine inspection? Typical performance is ±0.025 mm accuracy with a resolution of 0.0001 mm, offering reliable repeatability for shop‑floor quality control. Who manufactures this instrument and what is the SKU? The instrument is made by Microtech Metrology and supplied under SKU 139780700. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
480-780mm Internal Micrometer With Retractable Measuring Head, 0.001mm Resolution, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise digital measurement, traceable ISO 17025 calibration and a wide internal range to secure consistent quality in workshop and inspection routines; order the instrument directly via Metav Werkzeuge or consult our specialists for tailored advice. Internal Fine Measuring Instrument — digital internal precision gauge, 480–780 mm range, Microtech Metrology The Internal Fine Measuring Instrument is a digital gauge for accurate internal diameter and deep-bore measurement in precision workshops and quality control environments Digital readout, 0.001 mm resolution ISO 17025 calibration and certificate included Measuring range 480–780 mm, 400 mm depth Reliable, traceable accuracy for quality control This instrument delivers ±0.03 mm repeatability with a high-resolution 0.001 mm display, ensuring measurements meet strict production and inspection tolerances. The combination of fine resolution and certified calibration supports objective decision-making in incoming inspection and process control. Because the device is supplied with an ISO 17025 calibration certificate, measurement records are traceable and suitable for audit procedures without additional recalibration steps, reducing administrative overhead and production delays. Built for larger internal diameters and deep bores A wide measuring span of 480–780 mm and a 400 mm measuring depth allow the device to handle internal features of medium to large assemblies that standard callipers cannot reach. The extended range is particularly useful for components such as housings, bearings and cylindrical parts where inner geometry must be verified across a long axis. The digital display enables fast readout and reduces interpretation errors compared with analogue scales, improving throughput in repetitive inspection tasks. Integration into workshop workflows and durable operation Designed by Microtech Metrology, the instrument fits quality-focused workshops that require reproducible internal measurements without complex setup. The digital interface and clear display speed up routines while the supplied calibration certificate ensures continuity within quality systems. Metav’s distribution and quality filter in Emmerich further guarantee consistent availability and a reliable route to replacement or additional instruments when scaling inspection capacity is necessary. For precision measuring instruments from Microtech Metrology, contact Metav Werkzeuge in Emmerich for expert advice and to arrange delivery or calibration services Technical Data Article number: 139780800 GTIN: 4061905454257 eClass: 21170310 Digital: yes Accuracy: 0.03 mm Resolution: 0.001 mm ISO 17025 calibrated: yes Facts Measuring range: 480–780 mm Measuring depth: 400 mm Display resolution: 0.001 mm Measurement accuracy: ±0.03 mm Special features Manufacturer: Microtech Metrology Category: Fine measuring instruments Supplied with calibration certificate Suitable for internal diameter and deep-bore inspection FAQ What accuracy can be expected from this instrument? The instrument achieves ±0.03 mm accuracy with a 0.001 mm display resolution, providing the precision required for standard workshop and inspection tasks. Is the instrument supplied calibrated for traceability? Yes, the device is delivered fully calibrated with an ISO 17025 certificate, confirming traceability and suitability for formal quality control records. What measuring range and depth does the device cover? The unit measures internal features within 480–780 mm and supports a measuring depth of 400 mm, enabling inspection of medium to large internal geometries. Can this instrument replace standard calipers for internal measurements? For larger internal diameters and deeper bores beyond typical caliper reach, this digital instrument provides more consistent readout and better traceability than conventional calipers. What is the product identifier for ordering or documentation? Refer to article number 139780800 (GTIN 4061905454257) when specifying the Microtech Metrology internal fine measuring instrument in orders or quality records. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
5-15mm Internal Quick-Contact Gauge 0.01mm Resolution, Rounded Tips, Supplied in Case - Metav IndustryLine
Take advantage of fast, repeatable internal checks thanks to the combination of a 5–15 mm measuring range, 0.01 mm resolution and robust analogue mechanics; precise readings and straightforward handling keep inspection steps efficient. Order the probe directly via Metav Werkzeuge or consult our advisors for application guidance. Internal quick-contact probe M209.011 by Metav IndustryLine — 5–15 mm, 0.01 mm graduation Internal quick-contact probe M209.011 is an analogue measuring instrument designed for fast inspection of bores, grooves and similar features across machining and maintenance workflows. Internal range 5–15 mm 0.01 mm resolution dial reading Round probe tips R0.3 for bore checks Quick-contact design for rapid measurements Rapid, reliable internal checks that save inspection time The probe delivers a 0.01 mm graduation combined with an operational accuracy of ±0.02 mm, enabling rapid verification of internal dimensions without sacrificing reproducibility. The instrument’s quick-contact mechanism reduces the time per measurement compared with multi-step setups, which makes it an efficient choice for repetitive quality checks on production lines or in maintenance rounds. By converting each dial motion into an immediate, readable result, the device facilitates faster decision-making in the workflow and reduces non-productive time between measurements. Analogue durability for workshop and inspection use Built around a clear analogue dial and mechanical travel, the design prioritises robustness and long service life in demanding environments. The straightforward construction avoids reliance on electronics, making routine use and in-field checks less vulnerable to electrical faults. The solid feel and defined index points contribute to consistent readings under normal workshop conditions. As a tool from Metav IndustryLine, the instrument matches a practical balance of precision and maintenance ease that suits inspection benches, toolrooms and servicing departments alike. Probe geometry and contact design to improve repeatability The probe features R0.3 round tips optimised for contacting bores and grooves with minimal local deformation, supporting stable centring inside cylindrical features. The slender measuring tip and internal contact geometry are chosen to reduce rocking and ensure that repeated measurements return comparable results, which is especially important when assessing small diameters across a batch of components. This geometry, together with the fine graduation, gives technicians the ability to spot deviations swiftly and act before an entire run is affected. Application scenarios and practical benefits on the shop floor The instrument is suited to a range of applications: quick in-process checks of small bores, spot verifications during assembly, and spot-control operations in toolmaking. The compact size and analogue display make it easy to integrate into measuring jigs or use alongside other gauges on a workbench. The device’s balance of precision and user-friendly operation supports shorter inspection cycles and clearer pass/fail evaluations, contributing to higher throughput and fewer rework operations. For procurement and technical enquiries, Metav’s team offers straightforward guidance from its Emmerich location. Contact Metav Werkzeuge for tailored advice on the M209.011 or for procurement from our Emmerich stock—phone and email assistance is available to discuss compatibility with existing inspection processes. Technical data Article number: M209.011 GTIN: 4061905043321 Manufacturer: Metav IndustryLine Facts Measuring range: 5–15 mm Resolution / reading: 0.01 mm Stated accuracy: ±0.02 mm Weight: 0.8 kg Special features Analogue dial indicator Round probe tips R0.3 Designed for internal measurement of bores and grooves Suitable for rapid comparative checks and routine inspections FAQ How precise is the instrument for internal measurements? The M209.011 provides a 0.01 mm readout with a stated accuracy of ±0.02 mm, making it suitable for standard workshop tolerance checks and routine quality control. Can this probe be used for measuring grooves as well as bores? Yes, the geometry and R0.3 round tips on the probe are optimised for both bore and groove measurements, allowing consistent contact in recessed features. Is the dial analogue or digital? The device uses an analogue dial indicator, which offers reliable, immediate visual feedback without dependence on electronic components. Which applications suit this probe best? Typical uses include in-process verification of small diameters, spot checks during assembly, and quick inspection routines in maintenance and toolrooms; the probe supports fast decisions during production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5-25mm Digital Inside Calliper Probe 0.005mm Resolution With Round Tips, Rotating Display, Case - Metav IndustryLine
The combination of precise 0.005 mm resolution, a compact 5–25 mm measuring range and a rotatable readout ensures fast, repeatable internal measurements for workshop and inspection tasks; order the device directly via Metav Werkzeuge or consult the team for technical advice. Digital internal bore gauge M209.121 — 5–25 mm, 0.005 mm resolution (Metav IndustryLine) The Digital internal bore gauge M209.121 is a compact instrument for rapid internal measurements of bores, grooves and recesses in precision workshops and production environments. Precise 0.005 mm digital resolution Measuring range 5–25 mm Rotatable display with tolerance and data mode Rounded measuring tips R0.3 for minimal contact Fast, repeatable internal measurements for compact bores This instrument delivers quick and reliable internal measurements across a 5–25 mm range with a display resolution of 0.005 mm and a measurement accuracy around ±0.03 mm. Classified in the micro range, it is designed where compactness and rigidity matter: short contact geometry keeps deflection low and gives reproducible results when checking small-diameter bores or tight grooves. The fine display resolution enables clear decisions during inspection and production-control tasks without the need for intermediary calculations. Gentle contact for delicate surfaces and tight grooves Equipped with rounded measuring tips (R0.3), the gauge minimises surface marking and reduces the risk of snagging in narrow features. That geometry, paired with the instrument’s compact build, makes it particularly suitable for measuring internal diameters and groove depths in soft or plated components where controlled contact is essential. The tool’s lightweight construction and balanced feel support steady handling during repeat measurements, improving process consistency for routine quality checks. Clear readout and practical process features A rotatable digital display with ON/OFF/SET, ABS/INC/UNIT, TOL-, DATA and MODE functions simplifies reading and integration into measurement routines. The tolerance function permits quick go/no-go checks on the shop floor, while the data mode supports documentation of results for traceability. Controls are arranged for straightforward operation so that measurement throughput can be increased without sacrificing accuracy, making the device a practical choice for inline inspections and bench testing alike. Workshop-ready design that supports inspection workflows Weighing approximately 0.7 kg, the gauge is easy to handle and manoeuvre within fixtures or small assemblies. Its feature set targets everyday metrology tasks: fast bore checks, groove inspection and repeat verification during setup. The construction balances portability with robust repeatability, supporting standardised inspection procedures in machine shops, toolrooms and quality departments where compact internal measurements are frequent. Contact Metav Werkzeuge for a quotation or technical consultation on the Metav IndustryLine digital internal bore gauge M209.121 — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M209.121 GTIN: 4061905046421 Manufacturer: Metav IndustryLine Facts Measuring range: 5–25 mm Resolution (display): 0.005 mm Measurement accuracy: ±0.03 mm Weight: 0.7 kg Measuring tips radius: R0.3 Special features Digital, rotatable display with ON/OFF/SET, ABS/INC/UNIT, TOL-, DATA and MODE Suitable for internal measurements Designed for quick inspection of bores and grooves Micro-range instrument for compact precision work FAQ How small a bore can be measured with this instrument? The Digital internal bore gauge M209.121 measures from 5 mm up to 25 mm, making it suitable for small-diameter bores and narrow recesses. What resolution and accuracy can be expected during checks? The instrument provides a display resolution of 0.005 mm with a typical measurement accuracy of around ±0.03 mm for routine inspection tasks. Are the measuring tips suitable for sensitive surfaces? Yes. The rounded measuring tips (R0.3) on the M209.121 reduce contact marking and are suited to delicate or plated internal surfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5-25mm Internal Quick Bore Gauge 0.01mm Resolution With Spherical Tips, Supplied In Case - Metav IndustryLine
Take advantage of the combination of rapid internal measurement, fine 0.01 mm resolution and robust analogue mechanics for reliable shop-floor checks; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Innen-Schnelltaster 5–25 mm, 0.01 mm resolution — Metav IndustryLine internal dial test indicator with round tips Innen-Schnelltaster 5–25 mm, 0.01 mm resolution is an internal dial test indicator designed for quick inspections of bores, grooves and similar internal features in workshop and inspection settings. Internal measuring range 5–25 mm Fine 0.01 mm resolution for detailed checks Accuracy ±0.03 mm as reference for routine control Round tips R0.3 for delicate surface contact Rapid internal checks that save time on repetitive tasks The instrument is built for fast, repeatable internal measurement of bores and grooves. With a measuring range of 5–25 mm and a compact contact geometry, the gauge shortens setup and cycle times during batch checks. The round measuring tips (R0.3) reduce the risk of marking sensitive surfaces while maintaining consistent contact. This makes the device particularly suitable for routine inspection tasks where quick verification replaces time‑consuming setups. Precision suitable for standard workshop tolerance control Measured values are displayed with a 0.01 mm reading increment and an indicated accuracy of ±0.03 mm, which aligns with common shop tolerances for routine quality control. As an analogue dial test indicator, the mechanism provides immediate visual feedback without dependency on batteries, supporting environments where electrical simplicity and durability are priorities. The indicator’s design supports operators in obtaining stable readings on internal features with minimal ancillary equipment. Robust design for everyday metrology tasks Constructed to withstand typical workshop handling, the indicator combines a tactile feel with stable mechanics to reduce reading variability. The compact contact system and solid build keep the instrument aligned during measurement cycles, supporting repeatability across a production run. Supplied measuring tips and the mechanical action are optimised for interior measurements such as bores and slots, translating technical features into dependable inspection practice on the shop floor. Choose Metav IndustryLine for a dependable internal dial test indicator that combines speed and fine resolution — contact Metav Werkzeuge for ordering and tailored application guidance. Technical Data Article number: M209.021 GTIN: 4061905045509 Label: Innen-Schnelltaster 5 - 25 mm x 0,01 mm Ablesung 0,01 mm, mit Rundspitzen Facts Measuring range: 5–25 mm Resolution: 0.01 mm Accuracy: 0.03 Weight: 0.8 kg Special features Analogue dial test indicator Round measuring tips R0.3 Rapid internal measurement of bores and slots Suitable for workshop inspection and control FAQ Is the indicator suitable for measuring small-diameter bores? Yes. The internal dial test indicator is designed specifically for internal features and covers a measuring range of 5–25 mm, making it appropriate for small to medium bores. What level of precision can be expected with this analogue device? The instrument provides a 0.01 mm reading increment with an indicated reference accuracy of ±0.03 mm, which supports routine tolerance checks in production environments. Are the measuring tips suitable for sensitive surfaces? The supplied round tips (R0.3) minimise surface marking while maintaining reliable contact, so the indicator is appropriate for delicate internal surfaces such as finished bores. Can the indicator be used without electrical power? Yes. As an analogue dial test indicator, the device gives immediate readings mechanically and does not require batteries for operation. Which applications benefit most from this instrument? Typical uses include quick inspection of bores, grooves and internal features in machining, maintenance and quality control tasks where fast, repeatable checks are needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-100 mm Gauge Pins Set For Inside Micrometers 12-Piece, - Metav IndustryLine
Take advantage of precise, workshop-ready spare parts that ensure uninterrupted internal measurement tasks: the 12-piece measuring pin set extends the 50–100 mm range of compatible fine-measuring instruments and delivers consistent, repeatable positioning. Order or request individual advice directly via Metav Werkzeuge for fast supply and safe integration into existing inspection routines. 12-piece Measuring Pin Set M208.054.BZ1 — 50–100 mm, accessory for fine-measurement instruments (Metav IndustryLine) The Measuring Pin Set M208.054.BZ1 is a compact accessory designed to extend internal measurement capability for compatible fine-measurement devices, providing straightforward range coverage for the 50–100 mm interval without altering existing gauges. 12-piece set for flexible range extension Compatible with 208.023/024/424/427 models Range 50–100 mm for internal measurements Engineered for consistent internal checks The 12-piece pin set supplies a clear, measurable extension to internal gauging tasks by covering the 50–100 mm band with discrete, graduated sizes. In practical terms, the set reduces changeover time when switching between nominal diameters and supports repeatable placement during inspection sequences. The compact design keeps handling simple in busy workshop environments, while the documented GTIN and article identifier simplify inventory and traceability. This tangible improvement in measurement workflow contributes directly to process reliability and inspection throughput. Seamless compatibility that saves time Compatibility with models 208.023 / 208.024 / 208.424 / 208.427 ensures the set integrates into common fine-measurement systems without adapters or modification. This direct fit reduces the risk of alignment errors associated with improvised solutions and enables rapid replacement when worn items must be taken out of service. The measurable benefit is clear: fewer interruptions during batch inspections and a predictable spare‑part strategy that supports steady production. Practical design for workshop use Lightweight and compact, the pin set is supplied as a complete set for convenient storage and quick access. The physical footprint is optimised for bench use and small inspection stations, allowing operators to maintain ergonomics while performing internal measurements. As an accessory from Metav IndustryLine, the set aligns with an inventory philosophy that values interchangeability and pragmatic spare-part provisioning, supporting maintenance regimes that favour uptime and low administrative overhead. Confidence through supply and expertise Stocking accessories such as this measuring pin set at the Metav distribution point in Emmerich provides both availability and a quality filter for the European market. Metav’s experience in precision tools means the product is supported by a dependable logistics and advisory channel, which helps purchasers plan replacements and equipment expansions with minimal risk. That reassurance—backed by clear identifiers and consistent packaging—supports both procurement confidence and operational continuity. For reliable compatibility with existing fine-measurement equipment and prompt supply from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and ordering: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M208.054.BZ1 GTIN: 4054469146669 SKU: M208.054.BZ1 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 50–100 mm Pieces per set: 12 Weight: 0.02 kg Tariff number: 90179000 Designs / Special features Accessory for internal fine-measurement instruments Compatible models: 208.023, 208.024, 208.424, 208.427 Category: Zubehör (accessory) Packaged as a complete set for workshop use FAQ Are these pins compatible with existing internal fine-measuring devices? Yes. The measuring pin set M208.054.BZ1 is designed for direct compatibility with models 208.023, 208.024, 208.424 and 208.427 and fits as an accessory to extend internal measuring ranges. What measuring range is covered by the set? The set covers the 50–100 mm range with twelve discrete pins, providing stepwise coverage for internal diameter checks within that interval. How many pins are included and how are they supplied? Twelve pins are supplied as one set under SKU M208.054.BZ1, intended for straightforward storage and quick deployment in inspection routines. Is the set suitable for production inspection cycles? Yes. The pin set is intended as a workshop accessory for routine internal checks and spare-part provisioning, supporting repeatable positioning and reduced changeover time during inspection cycles. Can the measuring pins be used with other brands of instruments? Design and compatibility are specified for the listed models; using the pins with other instruments is possible only where the instrument accepts the same pin geometry and mounting. For cross-brand compatibility, confirm dimensions and fitment against the instrument’s specification. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-160mm Internal Fine Measuring Instrument Carbide Measuring Faces 0.01mm Vernier, Microtech Metrology
Built for workshop reliability with ±0.015 mm accuracy and carbide measuring faces, this internal precision gauge delivers repeatable internal measurements across a 50–160 mm range; order the Internal Precision Gauge directly via Metav Werkzeuge or ask our consultants if needed. Internal Precision Gauge 50–160 mm (analogue, ±0.015 mm) — Microtech Metrology The Internal Precision Gauge is an analogue internal measuring instrument designed for standard workshop quality control and precise component inspection. Analogue reading with 0.01 mm resolution High accuracy: ±0.015 mm standard Carbide measuring faces for wear resistance Accurate control for everyday measurement tasks The instrument is tailored to the standard workshop class, covering a measuring range of 50–160 mm that balances reach and rigidity for typical machine‑shop components. With an indicated accuracy of ±0.015 mm and an analogue reading step of 0.01 mm, the device permits consistent pass/fail assessments and fine adjustments during set‑up and inspection. This level of performance is particularly useful for small to medium assemblies, toolrooms and first‑article checks where reproducible internal dimensions are required. The analogue mechanism provides immediate tactile feedback and a clear graduated scale that supports fast decisions on the shop floor. Built to last under repetitive use and exposure Wear resistance is a key production requirement; the gauge features carbide measuring faces that significantly extend service life when used for routine internal measurements. The robust contact surfaces reduce profile wear and maintain measurement stability over time, lowering the need for frequent replacement or re‑grinding. A substantial measuring depth of 2000 mm supports reach into deeper housings and stepped bores, while the mechanical design emphasises repeatability and simplicity — attributes that reduce downtime and maintain throughput in busy production environments. Practical handling and straightforward quality documentation Designed for efficient use in daily workflows, the analogue indicator and clear scale enable quick readings without complex setup. The instrument suits standard quality routines, where swift verification and documented repeatability are priorities. Integration into inspection protocols is straightforward: record the analogue readout in existing check sheets or digitise the results via external documentation steps if required. Its classification as a workshop standard instrument makes it a reliable choice for machine builders, toolmakers and maintenance teams seeking a durable internal measuring device with proven mechanical precision. For precise internal measurements from Microtech Metrology, contact Metav Werkzeuge for technical advice or ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 132160144 GTIN: 4061905453878 Manufacturer: Microtech Metrology Category: Precision measuring devices ECLASS: 21170310 Facts Measuring range: 50–160 mm Resolution: 0.01 mm (analogue read) Accuracy: ±0.015 mm Measuring depth: 2000 mm Display type: analogue Special features Carbide measuring faces Analogue indicator for direct reading Standard class: 50–160 mm (workshop/metalworking) Suitable for internal measurements and stepped bores FAQ What measuring range does the instrument cover? The Internal Precision Gauge from Microtech Metrology covers a measuring range of 50–160 mm (SKU 132160144), making it suitable for standard workshop inspection tasks. How accurate is this internal measuring instrument? The device offers an accuracy of ±0.015 mm with an analogue reading step of 0.01 mm, which supports reliable dimensional control in routine quality checks. Are the measuring faces resistant to wear? Yes — the gauge is fitted with carbide measuring faces, providing improved wear resistance and longer service life under frequent use. Can the gauge reach deep internal features? The instrument provides a measuring depth of 2000 mm, enabling measurements in deeper housings and stepped bores where extended reach is required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-160mm Internal Micrometer Carbide Measuring Faces 0.01mm Resolution, Analog - Microtech Metrology
Take advantage of the combination of workshop durability, measurable precision and a practical measuring depth for consistent bore inspection results; order the gauge via Metav Werkzeuge or consult their technical advisers for application support. Internal Bore Gauge – Microtech Metrology, 50–160 mm, Carbide Contacts The internal bore gauge is an analogue instrument designed for accurate internal diameter measurement in metalworking and quality control environments. Carbide measuring faces for wear resistance Measuring range 50–160 mm Accuracy 0.015 mm for reliable results Analogue dial with 0.01 mm reading Precision where it counts The gauge delivers a declared accuracy of 0.015 mm with an indicator resolution of 0.01 mm, providing a trustworthy basis for pass/fail decisions and statistical process control in serial production. The analogue measurement principle supplies immediate tactile feedback and visual confirmation on a clear dial, which helps to shorten inspection cycles and reduce rework. Such repeatability is especially valuable when verifying internal diameters during setup checks or final inspection, as it translates directly into fewer rejects and more predictable production output. Built for robust workshop use Equipped with carbide measuring faces, the instrument resists wear from repeated contact with metal bores, extending service life and preserving measurement integrity over long usage cycles. The 50–160 mm measuring span places the device in the Standard size class, a practical range for machining and assembly tasks where reach and stiffness are balanced. With a 500 mm measuring depth, the gauge is capable of accessing recessed bores and internal features that would otherwise require awkward fixturing, enabling straightforward control of components from small housings to medium-sized assemblies. Efficient integration into inspection routines The analogue dial offers simple, rapid readings that integrate easily into existing quality workflows and visual inspection tables. As a mechanical instrument with carbide contacts and a clear scale, the device suits frontline quality control where fast decisions and machine-shop toughness are required. The solid construction and familiar handling reduce training time for operators, while consistent indicator behaviour supports reliable trending and comparative checks across batches. For traceability and inventory, the gauge is listed under SKU 132160111 and GTIN 4061905453854. For reliable internal diameter measurement choose Microtech Metrology’s internal bore gauge and contact Metav Werkzeuge in Emmerich for tailored application advice and supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 132160111 GTIN: 4061905453854 Brand: Microtech Metrology Facts Measuring range: 50–160 mm Indication / reading: 0.01 mm Stated accuracy: 0.015 mm Measuring depth: 500 mm Special features Carbide measuring faces Analogue dial indicator Standard class (50–300 mm) Suitable for internal diameter inspection FAQ What level of precision can be expected from this gauge? The internal bore gauge achieves a stated accuracy of 0.015 mm with a dial reading resolution of 0.01 mm, making it suitable for routine shop-floor and process-control measurements. For what diameter range is this instrument intended? The instrument covers internal diameters from 50 to 160 mm and is therefore classified in the Standard range for general machining and assembly tasks. Are the measuring faces durable for frequent use on metal parts? Yes, the gauge is fitted with carbide measuring faces that resist wear and maintain measurement quality under regular contact with metal bores. Can this gauge reach recessed bores or deep internal features? With a measuring depth of 500 mm the device can access recessed internal features and bores that are otherwise difficult to inspect without special fixtures. Is the instrument suitable for quick in-process checks? The analogue dial provides immediate visual feedback suitable for rapid in-process checks and routine quality-control stations; the model is listed under SKU 132160111 for inventory and ordering. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-160mm Internal Micrometer Carbide Measuring Faces, 0.003mm Accuracy, Touchscreen Display Wireless USB - Microtech Metrology
Benefit from ultra-fine internal measurement with 0.003 mm accuracy, robust carbide measuring faces and convenient wireless data transfer; order directly via Metav Werkzeuge or consult our specialists for application support. Internal bore gauge — precision internal measuring instrument with 0.003 mm accuracy (Microtech Metrology) Internal bore gauge for precise internal diameter checks in workshop and quality-control environments, designed for repeatable results across the 50–160 mm measuring range. High-precision 0.003 mm accuracy Colour 1.54" touchscreen display Carbide measuring faces for long wear Repeatable precision for internal diameters The instrument delivers an outstanding accuracy of 0.003 mm, making it suitable where tight tolerances determine part acceptance. Built for standard workshop use, the gauge balances reach and rigidity across the Standard range 50–160 mm, which is ideal for typical machine‑building and metalworking components. The combination of a fine mechanical indication and a high-resolution readout ensures that measurement scatter is minimised; this reduces rework and supports consistent batch inspection. The short, stiff contact geometry and carbide measuring faces provide wear resistance and maintain measuring quality over many cycles. Faster data capture and traceable results Equipped with Wireless+USB data output and a Colour 1.54" touchscreen, the instrument speeds transfer of measurement values into inspection routines and statistical process control systems. The documented reading resolution of 0.0001 mm permits detailed analysis while the wireless option reduces manual transcription errors and increases throughput on the shop floor. For shop environments that combine hands‑on gauging with digital record keeping, this solution bridges manual skills and digital quality processes without cumbersome adapters. Robust design that suits everyday workshop demands Aimed at routine and precision tasks, the device pairs resilient contact surfaces with a compact measuring head to withstand frequent handling. The use of carbide measuring faces reduces maintenance intervals and supports reliable inside‑diameter readings on a range of materials. The construction and display ergonomics allow for controlled measurement forces and clear result interpretation, so inspection staff can focus on process compliance rather than instrument handling. Contact Metav Werkzeuge for tailored advice on this Microtech Metrology internal bore gauge with 0.003 mm accuracy — call +49 2822 7131930 or email info@metav-werkzeuge.com for specification support and fast delivery from Emmerich. Technical data Article number: 132160711 GTIN: 4061905454189 Manufacturer: Microtech Metrology Category: Fine measuring instruments Display: Colour 1.54" touchscreen Data output: Wireless+USB Facts Accuracy: 0.003 mm Reading resolution: 0.0001 mm Measuring range: 50–160 mm Measuring depth: 500 mm Analog indication: yes Special features Carbide measuring faces Colour touchscreen Wireless and USB data output Suitable for standard workshop inspections FAQ What is the measuring range of this internal gauge? The internal bore gauge covers a measuring range of 50–160 mm, which places it in the Standard class for machine‑building and metalworking inspections. How precise are the measurements with this instrument? The instrument achieves an accuracy of 0.003 mm with a reading resolution of 0.0001 mm, delivering repeatable results for tight tolerance checks. Is the instrument suitable for long production runs? Yes, the carbide measuring faces minimise wear during repeated use and help maintain consistent readings across long production batches. Can measurement results be transferred directly to inspection software? Measurement values can be output via Wireless+USB, enabling straightforward integration with SPC and quality documentation workflows. Does the instrument require a special display interface? No special hardware is required; the device uses its integrated Colour 1.54" touchscreen for local operation and Wireless or USB for data transfer. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-160mm Internal Micrometer Carbide Measuring Faces, 2000mm Depth, 0.003mm Accuracy - Microtech Metrology
Take advantage of the combination of ±0.003 mm accuracy, carbide measuring faces and a fine 0.001 mm resolution for reproducible internal measurements in production and workshop use; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Internal Precision Micrometer with Carbide Measuring Faces and Digital Dial — Microtech Metrology The Internal Precision Micrometer is a specialised internal measuring instrument for precise bore and internal diameter control in workshop, tooling and quality‑control environments. Accuracy ±0.003 mm Resolution 0.001 mm Carbide measuring faces Measuring range 50–160 mm Consistent metrology where it matters This measuring instrument delivers a repeatable accuracy of ±0.003 mm, a level suited to high‑precision quality control and fine production tasks. Combined with a 0.001 mm resolution readout, the device enables clear detection of tiny deviations that can affect assembly fit or functional performance. The analogue mechanism coupled with a digital dial provides tactile feedback for controlled probing while the fine display supports documented readings, making the tool practical for both bench use and traceable inspection routines. Robust contact surfaces for longevity and low wear Equipped with carbide measuring faces, the gauge resists wear when used on harder bore surfaces, extending service intervals and maintaining measurement integrity. The hardened contact points reduce edge rounding and help preserve calibration over many cycles. Where long‑term stability is required in production environments, the combination of durable faces and a stable measuring mechanism reduces the risk of drift and keeps maintenance predictable. Practical measurement range and handling for everyday tasks Classified in the standard range, the instrument covers a useful span from 50–160 mm, offering the best compromise between reach and stiffness for typical machine‑shop bores and components. The unusually long stated measuring depth of 2,000 mm allows access to extended bore lengths and deep recesses without additional extensions, supporting measurements on longer components and assemblies. Ergonomic design and clear scale ergonomics make single‑operator workflows straightforward, while the solid construction aids reproducibility when measuring repeated features. Contact Metav Werkzeuge for tailored application advice on the Microtech Metrology internal precision instrument or to request documentation and delivery options from our Emmerich warehouse; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: 132160844 GTIN: 4061905453724 Manufacturer: Microtech Metrology Core specifications Measuring range: 50–160 mm Resolution: 0.001 mm Accuracy: ±0.003 mm Measuring depth: 2,000 mm Features Carbide measuring faces Analog mechanism with digital dial indicator Category: Fine measuring instrument ECLASS: 21170310 FAQ What level of accuracy can be expected from this instrument? The instrument provides an accuracy of ±0.003 mm, making the Internal Precision Micrometer suitable for precise internal diameter checks in production and inspection tasks. Is the readout fine enough for laboratory use? Yes, the device offers a 0.001 mm resolution on the dial, which supports fine discrimination and documentation during quality control and laboratory measurements. Are the measuring faces suitable for hard materials? The carbide measuring faces are intended for durable contact on harder surfaces and help maintain measurement integrity over repeated use. What range does the instrument cover and which applications does that suit? With a measuring range of 50–160 mm, the tool is in the standard class and is well matched to general machine‑shop bores, tooling and quality‑control checks; the extended measuring depth facilitates deeper bores. Which manufacturer supplies this instrument and how is it identified? This internal measuring instrument is supplied by Microtech Metrology and is listed under article number 132160844. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-160mm Internal Micrometer Carbide Measuring Faces, Mechanical 0.003mm Accuracy - Microtech Metrology
Take advantage of 0.003 mm accuracy, carbide measuring faces and a 50–160 mm measurement range with a 500 mm reach to ensure reliable bore inspection and fewer rework cycles. Order this internal precision gauge directly via Metav Werkzeuge or consult our specialists for application advice. Internal precision bore gauge – 50–160 mm range, 0.003 mm accuracy (Microtech Metrology) Internal precision bore gauge for verifiable inside measurements in workshop and production environments, designed for deep-bore inspection and repeatable quality control. High precision 0.003 mm accuracy Carbide measuring faces for wear resistance Measurement range 50–160 mm 500 mm reach for deep bore access Precision that reduces rejects and improves throughput The gauge delivers 0.003 mm stated accuracy, which translates into significantly tighter tolerances during incoming inspection and in-process checks. The analogue dial gauge provides an immediate visual result without menu navigation, helping to speed decision-making on the shop floor. Because the instrument focuses on repeatable mechanical measurement rather than complex electronics, it supports fast sampling routines and reduces time spent on secondary checks, contributing to measurable productivity gains. Built for standard workshop ranges with extended reach Classified in the Standard size bracket (measurement range up to 100–300 mm), the device covers the most common internal-diameter tasks while offering a 50–160 mm measuring span. The extended 500 mm measuring depth makes the tool suitable for deeper bores and assemblies that would otherwise require special fixturing. This combination of range and reach balances stiffness and accessibility, allowing a single instrument to replace multiple limited-reach gauges in everyday metalworking and toolroom workflows. Durable contact surfaces for long-term stability Equipped with carbide measuring faces, the instrument resists wear in continuous production use and preserves the measurement zero over many cycles. Carbide contact points maintain surface integrity against abrasive materials and reduce the need for frequent regrinding, which supports consistent results and lowers lifecycle costs. The rugged construction and clear mechanical indication also simplify maintenance routines and ensure the gauge remains a dependable part of quality-control processes. Practical handling for rapid inspection cycles The mechanical design emphasises straightforward operation: rapid set-up, tactile feel during measurement and a clear dial response for small deviations. This eases integration into routine inspection stations and simplifies operator training. For bespoke applications or complex geometries, technical advice is available to tailor extension rods or adapters. If additional technical data or adaptions are required, Metav Werkzeuge provides consultancy to match the gauge to specific inspection tasks. Contact Metav Werkzeuge today to discuss how the Microtech Metrology internal precision bore gauge can be configured for your application and to arrange delivery or further technical support Technical data Article number: 132160811 GTIN: 4061905453526 eClass: 21170310 Manufacturer: Microtech Metrology Core specifications Measurement range: 50–160 mm Measuring depth: 500 mm Accuracy: 0.003 mm Display: analogue dial indicator Features Carbide measuring faces Category: Precision measuring instrument (fine measuring device) Suitable for workshop and production inspection Model type: internal bore gauge FAQ What measurement range does the gauge cover? The instrument covers a 50–160 mm range, suitable for most internal-diameter inspections in the standard workshop bracket. How precise is the reading and what does 0.003 mm mean in practice? An accuracy of 0.003 mm indicates the gauge is designed for high-precision inspection; it supports tight tolerance checks and reduces the need for repeat measurements. Are the contact points durable for production use? Yes, the gauge is fitted with carbide measuring faces, which provide wear resistance and stable contact characteristics under frequent use. Can this gauge reach deep bores and cavities? The design offers a 500 mm measuring depth, enabling inspection of deeper bores that are common in assemblies and larger components. Who manufactures this instrument and what support is available? This product is produced by Microtech Metrology; further advice and sales are available through Metav Werkzeuge for configuration and application guidance. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-160mm Internal Micrometer Digital Touchscreen Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise 0.01 mm accuracy, integrated Wireless + USB data transfer and an included ISO 17025 calibration certificate for reliable internal bore inspections; order the internal precision gauge directly via Metav Werkzeuge or contact our consultants for application advice. Microtech Internal Precision Gauge — Digital internal measurement with 0.01 mm accuracy The Internal Precision Gauge from Microtech Metrology is a digital instrument for accurate internal measurements of bores and cavities in the workshop and laboratory, offering a 50–160 mm measuring range for standard industrial inspection tasks. Digital 1.5" colour touchscreen Wireless and USB data output ISO 17025 calibrated with certificate Reproducible accuracy and certified traceability for quality assurance Built for reproducible inspection, this instrument provides 0.01 mm accuracy, which supports routine quality control and process validation in production environments. The combination of a digital readout and factory ISO 17025 calibration means measurement results are traceable and suitable for documented inspection records; the delivered calibration certificate enables immediate use in audits or incoming inspection workflows. The compact electronic measurement head keeps mechanical influence low, translating into consistent readings across repeated checks. Faster data handling and fewer transcription errors Equipped with Wireless and USB data outputs and a 1.5" colour touchscreen, the gauge integrates into digital workflows to reduce manual entry and accelerate documentation. Wireless transfer streamlines batch logging while USB ensures a fast, reliable local connection for instrument docking or data export. The intuitive touch interface shortens training time and reduces user errors, improving throughput in inspection stations that require frequent internal diameter checks or trend logging. Optimised size and range for workshop versatility With a measuring range of 50–160 mm, this tool falls in the standard category for machine‑shop requirements and covers the most common internal dimensions for components, fixtures and housings. The instrument’s modest footprint and ergonomic controls support efficient single‑operator measurements, making it suitable for both bench inspection and in‑process quality checks. The device’s construction and modular design also facilitate straightforward maintenance and calibration intervals, helping to keep inspection routines predictable and cost‑effective. For traceable internal measurements with integrated data transfer and ISO 17025 certification, contact Metav Werkzeuge to secure your Microtech Metrology internal precision gauge and technical guidance Technical data SKU: 131160745 GTIN: 4061905045912 Manufacturer: Microtech Metrology Digital display: Color 1.5" touchscreen Data output: Wireless + USB ISO 17025 calibration: certificate included Numerical data Measuring range: 50–160 mm Accuracy: 0.01 mm Display resolution: 0.0001 Modules: 2 Messtiefe: 3000 Special features Digital internal measuring instrument Colour touchscreen interface Wireless data transmission USB connectivity Factory ISO 17025 calibration FAQ What measuring range does this instrument cover? The Microtech internal precision gauge covers a measuring range of 50–160 mm, suitable for standard workshop and machine‑shop bore inspections. Is the device delivered calibrated and traceable? Yes — the instrument is supplied with an ISO 17025 calibration certificate, providing traceable measurement results for documented quality control. How are measurements exported from the instrument? Measurements can be transferred via Wireless or USB connections; both options are supported by the Microtech internal precision gauge for efficient data logging. What accuracy and resolution can be expected? The instrument offers 0.01 mm accuracy with a display resolution of 0.0001, balancing practical inspection precision with readable digital feedback. Is the touchscreen suitable for industrial use? The 1.5" colour touchscreen provides a robust and intuitive interface designed for workshop conditions and quick operator interaction. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-160mm Internal Micrometer With Carbide Measuring Faces, 0.003mm Accuracy, Wireless/USB Output - Microtech Metrology
Combining 0.003 mm measurement accuracy with carbide measuring faces and Wireless + USB data output, this instrument supports reproducible internal-diameter checks across workshop and production environments. Order the device directly via Metav Werkzeuge for reliable supply or consult our specialists for application advice. Digital Inside Micrometer — Internal Fine Measuring Instrument by Microtech Metrology — 0.003 mm accuracy, 50–160 mm range The Digital Inside Micrometer is an electronic internal-diameter gauge designed for precise bore measurement within industrial metrology and quality-control workflows, ideal for workshop and laboratory applications. 0.003 mm high-precision accuracy Measuring range 50–160 mm Carbide measuring faces for durability Wireless and USB data output Precision where measurement tolerance matters The instrument delivers 0.003 mm nominal accuracy, combining fine mechanical guidance with electronic readout to reduce reading uncertainty. A high-resolution display capability (reading resolution 0.0001 mm) supports clear interpretation of results for small tolerance windows. This level of performance places the tool firmly in the category of precision inside measurement equipment, making it suitable for tasks where reproducibility and traceability are required in routine shop-floor checks and first-off inspections. By specifying accuracy and resolution explicitly, the workflow for tolerance verification becomes more predictable and less dependent on operator judgement. Seamless data transfer for process control Equipped with Wireless and USB data output and a colour 1.54" touchscreen, the device enables direct transfer of readings into quality-control systems or inspection logs. Digital connectivity reduces transcription errors and supports statistical process control routines, so machines and inspection stations can share measured values without manual re-entry. The touchscreen simplifies display of incremental and absolute values, while the Wireless + USB options provide flexible integration into lab benches or portable measuring stations, improving throughput in serial inspection tasks. Durable contact surfaces and robust handling The measuring contacts are manufactured as carbide measuring faces, chosen for wear resistance and consistent contact geometry over long measurement campaigns. The combination of hard contact faces and stable mechanical guidance minimises flank wear and maintains repeatability even after extended use. The instrument’s mechanical elements have been designed for steady handling and straightforward operation, which helps to keep measurement scatter low during repetitive internal-diameter tasks often found in production environments. Standard-range classification and application fit With a measuring span from 50–160 mm, the unit belongs to the standard range of inside measuring instruments: a practical compromise between reach and rigidity that covers the most common bore sizes in metalworking and component assembly. The specified measuring depth of 2000 mm indicates suitability for deeper bores or recessed features when paired with appropriate extensions or fixturing. Typical use cases include routine bore inspection in machining, quality assurance of housings and sleeves, and dimensional checks during assembly operations where dependable internal readings are required. For detailed specification sheets, calibration options and order processing for the Microtech Metrology Digital Inside Micrometer (SKU 132160744), contact Metav Werkzeuge to discuss application matching and delivery from our Emmerich site Technical Data Article number: 132160744 GTIN: 4061905454202 Manufacturer: Microtech Metrology Facts Measuring range: 50–160 mm Accuracy: 0.003 mm Reading resolution: 0.0001 mm Measuring depth: 2000 mm Special features Carbide measuring faces Colour 1.54" touchscreen display Data output: Wireless and USB Analog operation available FAQ What measuring range does this instrument cover and how is it classified? The instrument covers 50–160 mm and is classified in the standard range for inside measuring devices; the Microtech Metrology digital inside micrometer (SKU 132160744) is aimed at common workshop and production bore sizes. How precise are the readings and what resolution can be expected? Readings are specified with an accuracy of 0.003 mm and a displayed reading resolution of 0.0001 mm on the Microtech Metrology device, providing fine discrimination for tight tolerances. Which data interfaces are available for transferring measurements? The unit offers Wireless connectivity and a USB output for direct data capture to inspection software or logging systems, enabling digital transfer without manual re-entry. Are the measuring faces suitable for industrial use? Yes, the measuring faces are made of carbide, which provides superior wear resistance and ensures consistent contact geometry during extended inspection sequences. Can the instrument be used for deep or recessed bores? The specified measuring depth is 2000 mm, allowing measurement of deeper features when used with suitable extensions or fixtures, as common in component assembly and special inspection setups. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Fast, repeatable geometry checks in seconds
Caliper gauges (also referred to as precision calipers or quick-action gauges) are high-efficiency fine measuring instruments designed for precise geometry control in the production environment. Need to verify internal grooves, pipe wall thickness or small bores quickly? These tools deliver reliable results at sampling speed, making them ideal for series production, incoming goods inspection and workshop testing.
How they work and where they belong
The core of these devices is a spring-loaded lever system that applies a defined contact force, so measurements remain repeatable and independent of the operator’s feel. Caliper gauges capture hard-to-reach features — deep internal grooves, notches, freeform surfaces and thin walls — either mechanically or in digital form. Ergonomic one-handed operation allows the workpiece to stay in the machine or on the test table while checks are performed, reducing handling and downtime.
Practical advantages that improve throughput
- Consistent repeatability due to defined contact force, lowering measurement scatter.
- Rapid sampling: geometry checks are performed in the time of a few seconds, reducing cycle times.
- Flexible contact options such as ball, blade or disc contacts, matching different workpiece geometries.
- Choice of robust analog models or digital units with Go/NoGo tolerance indication and interfaces for direct integration into digital quality assurance.
- Ergonomic design that shortens set-up and inspection times, increasing shop-floor productivity.
Metav: a reliable precision partner for industry
Metav combines decades of metrology experience with a broad offering from Emmerich, acting as a quality filter for the European market. With more than 48,000 customers and over 250,000 products, Metav supplies a comprehensive selection of caliper gauges and accessories, helping purchasing managers reduce supplier complexity while securing reliable supply and technical competence.
Summary
Caliper gauges — precision calipers and quick-action gauges — provide fast, repeatable and operator-independent measurements for demanding industrial inspection tasks, delivering measurable gains in throughput and quality control.
FAQ
What makes caliper gauges suitable for deep internal measurements?
The spring-loaded lever system in caliper gauges ensures a defined contact force while specialised stylus geometries (ball, blade, disc) reach deep grooves and notches, enabling precise capture of internal features.
Can digital caliper gauges be integrated into existing quality systems?
Yes. Digital caliper gauges often include tolerance indication (Go/NoGo) and data interfaces, allowing direct connection to digital quality assurance systems for automated logging and analysis.
Which contact form should I choose for thin-walled parts?
For thin or delicate walls, disc or ball contacts minimise local deformation; Metav’s product range lists the available contact geometries so you can match the caliper gauge to the application.
How do caliper gauges maintain operator-independent repeatability?
Defined contact force from the spring-loaded lever system removes variability caused by hand pressure, so caliper gauges deliver consistent measurements across different operators and cycles.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com