High-precision caliper gauges for rapid, repeatable measurements
Specialist caliper gauges and quick-test probes deliver fast, reliable geometry checks in production, incoming inspection and workshop use by mechanically or digitally capturing hard-to-reach features such as deep internal grooves, bore depths, tube wall thicknesses and freeform surfaces. Their spring-loaded lever mechanism ensures a defined contact force for absolutely repeatable results independent of the operator, while ergonomic designs allow one-handed operation with the workpiece remaining in the machine or on the inspection table. Available in a range of contact shapes and probe arm geometries, these precision calipers include analogue dial options for robust continuous use and digital models with tolerance signalling and data interfaces for seamless integration into quality control systems.
50-160mm Internal Micrometer With Carbide Measuring Faces, 0.003mm Resolution - Microtech Metrology
Take advantage of the combination of carbide measuring faces, a 50–160 mm measuring range and a 0.001 mm reading, delivering precise internal dimension checks with repeatable results; order directly via Metav Werkzeuge or consult our specialists for application advice. Internal Fine Measuring Instrument — analogue dial gauge, carbide faces, 50–160 mm range (Microtech Metrology) Internal Fine Measuring Instrument for precise internal dimension measurement in workshop and production environments Range 50–160 mm measuring capacity Carbide measuring faces for wear resistance 0.001 mm reading resolution 0.003 mm measurement accuracy Reliable accuracy for internal diameter checks The Internal Fine Measuring Instrument is designed for high‑precision internal measurements where repeatability is essential. The device covers a measuring range of 50–160 mm, offering a balance between reach and rigidity typical of a standard range gauge. With a reading resolution of 0.001 mm and an established measurement accuracy of ±0.003 mm, the instrument supports tight tolerance control in routine quality checks. These specifications translate into fewer reworks, more consistent batch quality and clearer go/no‑go decisions on the shop floor, making process control faster and more reliable. Hard-wearing measuring faces for long service life The contact surfaces are fitted with carbide measuring faces, which significantly reduce wear under frequent use and ensure a stable contact geometry over time. This durability maintains measurement consistency across repetitive checks and limits the frequency of face replacement or adjustment. The measuring depth of 150 mm allows inspection well into bores and recesses that are common in component assembly and fixture manufacture, preserving accuracy even when reach is required. Fast, intuitive readings and robust operation Operation is facilitated by an analogue dial that reports increments down to 0.001 mm, enabling rapid visual assessment without interface delays or battery dependence. The mechanical dial format is particularly advantageous in busy workshops where durability and immediacy are valued; readings can be taken and interpreted in seconds, which speeds up in‑process inspection and reduces machine downtime. Combined with its compact feel and single‑person handling, the instrument supports efficient quality control cycles and straightforward integration into inspection workstations. Suitable applications and workshop benefits This internal gauge is well suited to machine shops, toolrooms, jig and fixture production, and maintenance departments that require precise internal diameter measurement without resorting to more complex systems. The 50–160 mm range covers common bore and housing sizes encountered in general engineering, while the ±0.003 mm accuracy positions the instrument for demanding tolerance checks in small to medium assemblies. As a mechanically simple but technically capable tool, it complements digital measuring systems and serves as a reliable immediate‑use instrument for incoming inspection and process monitoring. Choose Microtech Metrology’s Internal Fine Measuring Instrument for consistent bore inspection and efficient quality control — contact Metav Werkzeuge for product selection assistance and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 132160800 GTIN: 4061905453519 Manufacturer: Microtech Metrology EClass: 21170310 Facts Measuring range: 50–160 mm Measuring depth: 150 mm Resolution (reading): 0.001 mm Accuracy: ±0.003 mm Display type: Analogue dial Special features Carbide measuring faces Category: Standard measuring range (50–300 mm) Suitable for internal diameter, step and bore measurements FAQ What measuring range does the instrument cover? The instrument covers a measuring range of 50–160 mm and a measuring depth of 150 mm for deeper bore checks. What resolution and accuracy are provided? Resolution is 0.001 mm and the stated measurement accuracy is ±0.003 mm for consistent repeatability. Are the contact faces suitable for heavy workshop use? Yes, the carbide measuring faces on this Microtech Metrology internal gauge (SKU 132160800) provide wear resistance and long service life. Is the readout analogue or digital? The device uses an analogue dial, offering quick, battery‑free readings down to 0.001 mm. Which workshop tasks is the instrument best suited to? It is ideal for machine shops, toolrooms and fixture manufacture where precise internal diameter and bore checks are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-160mm Internal Precision Bore Gauge 0.01mm Resolution 1000mm Reach, Supplied in Case - Metav IndustryLine
Take advantage of high-resolution 0.01 mm measurement, a 1,000 mm measuring depth and robust repeatability to maintain consistent quality in deep-bore inspections; order the M208.427 directly via Metav Werkzeuge or ask our consultants if needed. M208.427 inside dial bore gauge 50–160 mm — Metav IndustryLine M208.427 inside dial bore gauge 50–160 mm provides precise internal diameter measurement for deep bores and assemblies in workshop and quality-control environments. High resolution 0.01 mm reading Measuring depth 1,000 mm reach Repeatability ±0.02 mm Delivered in transport case Precision and repeatability for critical internal measurements The gauge combines a mechanical dial indicator with a finely graduated scale to deliver 0.01 mm resolution and a measured repeatability of ±0.02 mm, which translates into dependable results for routine quality checks and production sampling. This level of reproducibility supports faster decision-making on the shop floor by reducing measurement scatter; the robust mechanical design helps preserve calibration over repeated cycles. The measuring range of 50–160 mm sits in the standard category for workshop use, offering the best balance between reach and stiffness for common internal diameter tasks. Deep-reach capability with practical handling benefits With a measuring depth of 1,000 mm, this instrument is designed for bores and internal features that are out of reach for conventional short-stem gauges. The elongated reach is matched by a lightweight construction (approx. 1.4 kg) and a matt chrome-plated holder, which aids handling while resisting surface wear. The set includes 12×Ø6 mm measuring pins and an extension option (50 mm), enabling adaptation to various bore profiles and staged measurement setups. Supplied in a protective transport case, the instrument is ready for secure storage and safe transfer between workstations. Built for workshop workflows and clear traceability The mechanical dial format provides immediate, analogue feedback that is quick to interpret during serial inspections, reducing cycle times compared with complex digital setups. The pack also contains pass rings (0.5 / 1 / 2 / 3 × Ø8.5) for quick functional checks and set-up verification. The combination of visible graduations, durable mounting and extension capability supports straightforward integration into existing inspection routines, allowing teams to standardise measurement procedures without extensive retraining. Time-saving features and quality assurance advantages The gauge’s proven repeatability and solid construction lower uncertainty and minimise rework resulting from ambiguous measurements; this contributes directly to productivity and scrap reduction. The analogue indication requires no batteries and offers immediate readings, which is advantageous for continuous shop use and for environments where simplicity and robustness take priority. The transport case preserves alignment and reduces downtime linked to transport damage, while the chrome-plated holder improves resistance to daily wear and handling. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine M208.427 can be integrated into production and inspection routines — personalised technical advice and delivery from Emmerich are available Technical data Article number: M208.427 GTIN: 4061905044298 Manufacturer: Metav IndustryLine Category: Messuhren Weight: 1.4 kg Facts Measuring range: 50–160 mm Measuring depth: 1,000 mm Resolution: 0.01 mm Repeatability: 0.02 mm Measuring pins: 12×Ø6 mm Extensions: 50 mm Special features Analog dial indicator Matt chrome-plated holder Pass rings: 0.5 / 1 / 2 / 3 × Ø8.5 Delivered in transport case FAQ What measurement range does the instrument cover? The M208.427 covers internal diameters from 50 to 160 mm, designed for standard workshop applications. How deep into a bore can the gauge measure? The gauge provides a measuring depth of 1,000 mm, suitable for deep bores and recessed features. What is the smallest division and how repeatable are readings? The instrument has a resolution of 0.01 mm and a repeatability of approximately ±0.02 mm, supporting consistent inspection results. Are extensions and interchangeable pins included? Extensions (50 mm) and a set of 12×Ø6 mm measuring pins are listed as part of the equipment to adapt to various bore geometries. Is the gauge supplied ready for transport and storage? The instrument is delivered in a protective transport case to safeguard the measuring assembly during transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-160mm Internal Precision Bore Gauge 0.01mm Resolution, 500mm Depth, Supplied in Case - Metav IndustryLine
Take advantage of precise internal measurements with a fine analogue gauge that combines a 50–160 mm measuring range, 0.01 mm graduation and a 500 mm measuring depth for reliable quality control in workshop and inspection tasks; order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Inside Fine Measuring Instrument M208.424 — analogue internal gauge, 50–160 mm range, 0.01 mm resolution Inside Fine Measuring Instrument M208.424 is an analogue internal measuring gauge designed for accurate bore and internal feature measurement in production and inspection environments Analogue dial with 0.01 mm graduation Measuring depth 500 mm for deep bores Repeatability ±0.02 mm for consistent readings Precision where it matters: repeatable, traceable readings for inspection The analogue dial offers a fine 0.01 mm graduation combined with a documented repeatability of ±0.02 mm, delivering measurable improvements in process control and quality assurance. These specifications make the instrument especially suited to tasks that demand reproducible results rather than only one-off checks. The analogue dial simplifies immediate comparison against tolerance bands, while the conservative repeatability margin supports decision-making during in-process checks and final inspection. Reach and access: engineered for deeper bores and awkward geometries A 500 mm measuring depth gives this gauge the reach required for deeper internal features commonly found in components such as sleeves, housings and long bores. The design includes a long stem with available extensions and a set of 12 measuring pins Ø6 mm, enabling secure contact with the measurement surface and reducing radius-related measurement errors. Classified as a Standard range instrument (max 160 mm), it balances reach and stiffness for everyday machine‑shop duties without compromising handling. Robust construction for routine use and straightforward handling The instrument is fitted with a matt chrome-plated holder, providing corrosion resistance and a firm gripping surface for repeated use. Complementary items such as pass gauges are provided for quick go/no-go checks, and the compact overall weight supports practical handling on the bench or in a measuring station. As an analogue internal gauge, it is valued for its simplicity, low maintenance and immediate legibility; these operational benefits translate into reduced setup time and fewer interruptions during batch inspection runs. For tailored advice or to place an order for the Metav IndustryLine M208.424, contact Metav Werkzeuge — local stock and specialist consultants are available to ensure the instrument matches the inspection task at hand. Technical data Article number: M208.424 GTIN: 4061905043338 Manufacturer: Metav IndustryLine Facts Measuring range: 50–160 mm Measuring depth: 500 mm Graduation / reading: 0.01 mm Repeatability: 0.02 mm Weight: 1.4 kg Extensions: 50 Special features Analogue dial gauge Device holder matt chrome-plated Measuring pins: 12 × Ø6 mm Pass gauges: 0.5 / 1 / 2 / 3 × Ø8.5 mm FAQ What measuring tasks is this instrument best suited to? The M208.424 inside gauge is designed for internal diameter and feature checks on components such as housings and sleeves where a 50–160 mm range and extended 500 mm reach are required. Is the reading resolution sufficient for workshop quality control? Yes, the 0.01 mm graduation with a repeatability of ±0.02 mm makes the instrument suitable for standard machine‑shop quality control and routine inspection tasks. Can the gauge reach deep bores reliably? The 500 mm measuring depth and supplementary extensions enable secure access to deeper bores while maintaining contact stability through the supplied measuring pins. What materials and components are fitted to the instrument? The instrument features a matt chrome-plated holder, a mechanical analogue dial and a set of 12 measuring pins Ø6 mm for consistent contact geometry. Which SKU and brand should be referenced when ordering? Order reference: M208.424, Metav IndustryLine; quoting this SKU ensures the correct analogue internal gauge is supplied. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-160mm Internal Precision Gauge Carbide Measuring Faces 0.01mm Resolution, Analogue - Microtech Metrology
The combination of precise mechanical measurement, wear‑resistant carbide contact faces and a practical measuring depth makes this instrument well suited to routine internal inspections; benefit from reliable repeatability across the 50–160 mm span. Order directly via Metav Werkzeuge or consult our specialists for application advice. Internal precision measuring instrument — analogue gauge with carbide measuring faces The Internal precision measuring instrument is an analogue internal gauge for accurate inspection of bores, recesses and internal features in metalworking and quality control applications, covering a 50–160 mm measurement range. Analogue display with 0.01 mm graduation Measurement range 50–160 mm Carbide measuring faces for wear resistance Measuring depth 150 mm for deep bores Consistent inspection accuracy that reduces rework The instrument delivers a declared accuracy of 0.015 mm, which positions it between standard shop gauges and high‑end lab comparators for demanding routine checks. With an analogue vernier and a readable 0.01 mm graduation, operators gain a direct, low‑complexity means of verifying internal dimensions without electronic interfaces. This mechanical precision supports faster decision cycles on the shop floor and reduces downtime caused by uncertain measurements. Durable contact faces extend service intervals Equipped with carbide measuring faces, the gauge resists abrasion and maintains measurement integrity where frequent contact with finished bores occurs. The hardened contact surfaces preserve geometry over prolonged use, lowering the frequency of regrinding or replacement and helping to keep inspection costs predictable. A measuring depth of 150 mm allows access to deeper internal features while retaining stable support for the probe assembly. Simple handling for reliable everyday results The analogue design keeps operation intuitive: the vernier mechanism offers tactile feedback and does not rely on batteries or electronics, so maintenance is minimal and the device remains operational in harsher workshop environments. As a rugged internal gauge it suits standard metrology tasks in machine shops, toolrooms and incoming inspection. The compact mechanical layout aids repeatable positioning and consistent contact pressure, improving comparability between operators without complex training. Contact Metav Werkzeuge to discuss how this Microtech Metrology internal precision measuring instrument (SKU 132160100) can be integrated into existing inspection routines and to request application guidance — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 132160100 GTIN: 4061905453700 Manufacturer: Microtech Metrology Facts Measurement range: 50–160 mm Accuracy: 0.015 mm Reading: 0.01 mm Measuring depth: 150 mm Type: Analogue (vernier) Special features Carbide measuring faces Suited to internal measurements, bores and recesses Category: Precision measuring instrument (internal gauge) FAQ What measurement range does the instrument cover? The instrument covers internal dimensions from 50–160 mm, suitable for common bore and recess inspections. How precise is the gauge in regular use? Declared accuracy is 0.015 mm; the analogue vernier with 0.01 mm graduation supports repeatable shop‑floor checks. Are the contact faces suitable for frequent inspection jobs? Yes — the carbide measuring faces are designed for wear resistance, sustaining dimensional stability under regular use. Which applications are best suited to this instrument? Ideal for routine bore and internal feature checks in machining, toolmaking and incoming inspection where a robust analogue gauge is preferred. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-160mm Internal Precision Gauge With Carbide Measuring Faces, 0.003mm Resolution - Microtech Metrology
Take advantage of the combination of high‑resolution reading, consistent ±0.003 mm accuracy and wear‑resistant carbide contact faces to ensure reproducible bore inspections across production batches; order the instrument via Metav Werkzeuge or consult our technical team for application advice. Microtech Metrology Internal Precision Gauge — 50–160 mm, ±0.003 mm accuracy The Internal precision gauge is a workshop and inspection instrument engineered for repeatable internal diameter measurement across medium‑sized bores, combining fine resolution with robust contact faces for long service life. Carbide measuring faces for long wear resistance Measuring range 50–160 mm for standard workshop tasks Accuracy ±0.003 mm for reliable quality control Analogue readout with 0.001 mm resolution for fine adjustments Precision that reduces rework and inspection time The instrument delivers a stated accuracy of ±0.003 mm with a reading increment of 0.001 mm, a combination that supports statistically meaningful control in production environments. The close tolerance capability means measurement variation is reduced, which in turn lowers the risk of part rejection and rework. For shopfloor quality assurance, these figures translate into fewer corrective cycles and steadier process capability. The analogue mechanism provides immediate, continuous feedback useful during setup and alignment tasks, while the fine reading increment allows operators to detect small deviations from nominal quickly. Durable contact geometry for consistent results Equipped with carbide measuring faces, the gauge resists abrasive wear that typically blunts softer contact points. Hard contact surfaces preserve the original measuring geometry over many cycles, so calibrations remain valid longer and results stay consistent between inspections. Carbide tips also reduce the need for frequent replacement or re‑conditioning, lowering total cost of ownership in high‑throughput environments. The contact design maintains a stable reference on internal diameters, which is particularly valuable when measuring repetitive production runs or hard materials that can erode standard faces. Range and handling tuned to workshop routines With a measuring range of 50–160 mm, this device fits the standard category used across general mechanical and metalworking shops, offering the best balance of reach and rigidity for typical components such as housings, sleeves and medium‑sized bores. The instrument’s construction supports confident single‑hand adjustments and quick repositioning, improving inspection throughput. The analogue dial allows operators to follow trend changes in real time during set‑up or when fine‑tuning fits, making it suitable for both initial process validation and ongoing in‑line checks. Training time is short because the measuring principle is familiar to technicians versed in conventional bore gauges. Integration into quality workflows and documentation The gauge is supplied with traceable identifiers (GTIN and SKU) for inventory and quality record keeping, enabling simple linking to inspection sheets and batch documentation. The clear specification of range, accuracy and readout resolution simplifies the decision whether this gauge meets a given inspection plan or process capability target. For complex checks or when higher‑level traceability is required, Metav Werkzeuge’s specialists can advise on appropriate calibration intervals and documentation practices to integrate the instrument into a calibrated quality system. For application guidance or to arrange procurement through Metav Werkzeuge — including discussion of calibration options and suitable accessories — please contact our consultants directly via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 132160822 GTIN: 4061905453717 Brand: Microtech Metrology Category: Fine measuring instruments (internal gauge) Facts Measuring range: 50–160 mm Accuracy: ±0.003 mm Resolution / reading: 0.001 mm Analogue instrument Special features Carbide measuring faces Messtiefe: 1000 mm SKU: 132160822 eClass: 21170310 FAQ What is the measuring range of this internal gauge? The measuring range is 50–160 mm, suitable for standard workshop and inspection tasks where medium bore coverage is required. How precise is the instrument for quality control? The instrument offers an accuracy of ±0.003 mm with a reading increment of 0.001 mm, providing the resolution and repeatability needed for routine dimensional control. Are the contact faces resistant to wear? Yes, the gauge features carbide measuring faces that maintain measuring geometry and reduce wear over prolonged use. Is this gauge suitable for machine‑shop in‑process checks? This analogue internal gauge is designed for workshop use and in‑process inspection, offering quick visual feedback and robust handling for routine checks. What identifiers should be used when ordering spare parts or logging the instrument? Use the SKU 132160822 and GTIN 4061905453717 to reference the Microtech Metrology internal precision gauge when ordering accessories or recording the instrument in inventory. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-160mm Internal Precision Gauge With Carbide Measuring Faces, 0.015mm Resolution - Microtech Metrology
Take advantage of precise bore measurement with 0.015 mm accuracy, carbide measuring faces and a compact analogue dial format for reliable, repeatable inspection results. Order the internal dial bore gauge directly via Metav Werkzeuge or ask our consultants if needed. Internal dial bore gauge — 50–160 mm range, carbide measuring faces (Microtech Metrology) The internal dial bore gauge is a workshop-grade instrument for precise internal measurements of bores, bearings and mating surfaces in machine and inspection environments. Precision range 50–160 mm Carbide measuring faces for long wear resistance Analogue dial with 0.01 mm graduation High accuracy 0.015 mm Repeatable accuracy for quality control Built as an industrial metrology instrument, this bore gauge delivers consistent results where traceability matters. The mechanical construction and carbide measuring faces reduce wear and maintain contact geometry over long inspection runs, so measurement drift is limited and rework is reduced. With a specified accuracy of 0.015 mm and a fine reading step of 0.01 mm, the tool supports fast go/no-go assessments and documented checks in small-batch production and routine quality control. Practical form for everyday workshop use Designed for the demands of a busy workshop, the gauge fits the Standard range (50–300 mm) class and offers a compact measuring span of 50–160 mm, which covers the most common bore sizes encountered in maintenance and part manufacture. The instrument’s analogue layout means immediate visual feedback via the dial, enabling swift decisions at the bench without reliance on batteries or electronics. The combination of robust construction and a familiar operating principle reduces training time while improving measurement throughput. Clear measurement capability and handling benefit The instrument’s analogue dial with 0.01 mm graduation allows fine resolution readings for intermediate adjustments and setting operations. The declared accuracy of 0.015 mm provides a reliable tolerance basis for fitting tasks and inspection reports. A practical measuring reach of 1000 mm (messtiefe) supports inspections in deeper bores or when access requires extended stems, giving flexibility across a wider range of components without multiple specialised tools. Trust, supply and industrial context Supplied by Microtech Metrology, this analogue fine measuring device is positioned for industrial metrology and workshop inspection rather than casual DIY use. Procuring through Metav integrates the instrument into a stable European supply chain: Metav’s quality filter and logistics ensure consistent availability and a large catalogue for complementary inspection tools. The product’s engineering intent is to streamline measurement routines and reduce uncertainty where reproducibility is required most. Arrange supply of the Microtech Metrology internal dial bore gauge via Metav Werkzeuge for assured workshop precision and straightforward specification advice; contact info@metav-werkzeuge.com or call +49 2822 7131930 for clarification on compatibility and delivery options. Technical data Article number: 132160122 GTIN: 4061905453861 Manufacturer: Microtech Metrology Data Measuring range: 50–160 mm Resolution / reading: 0.01 mm Accuracy: 0.015 mm Measuring depth: 1000 mm Special features Analogue dial indicator Carbide measuring faces Category: Fine measuring instruments Classification: Standard range (50–300 mm) FAQ What measurement range does this instrument cover? The internal dial bore gauge covers a measuring range from 50 to 160 mm, classifying it within the standard workshop range for common bore sizes. What resolution and accuracy can be expected? The analogue instrument provides a 0.01 mm graduation on the dial and a stated accuracy of 0.015 mm, suitable for routine inspection and fitting tasks. Are the measuring faces hardened for longevity? Yes, the gauge is fitted with carbide measuring faces, which are wear-resistant and maintain stable contact geometry for extended use. Is the device analogue or digital, and what is the benefit? The device uses an analogue dial indicator; this offers immediate visual feedback, no battery dependence and straightforward operation for fast bench checks. Which applications suit this fine measuring instrument? The instrument is intended for internal measurements of bores, bearings and mating surfaces in machine shops, maintenance departments and inspection benches, where repeatable results are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50-180mm Internal Micrometer Carbide Measuring Head 0.01mm Graduation Repeatability 0.005mm Supplied in Case - Metav IndustryLine
Benefit from precise internal measurements across a practical working range, paired with durable carbide contact faces and high repeatability for consistent quality control; order directly via Metav Werkzeuge or consult our technical team for application advice. M208.254 Internal Fine Measuring Instrument – 50–180 mm, Carbide Measuring Head (Analogue) The M208.254 is an analogue internal measuring instrument designed for precise inside-diameter checks in workshop and quality‑control environments, offering a robust carbide contact and a practical measuring depth for bore inspection Analogue dial reading 0.01 mm Repeatability 0.005 mm Carbide contact faces for durability Measuring depth 150 mm for deep bores Precise, repeatable readings for reliable control The instrument delivers a clear analogue dial with a resolution of 0.01 mm, while its measured repeatability of 0.005 mm ensures consistent results when comparing batches or verifying machining steps. Such numerical performance supports rational decision‑making in inspection: tighter tolerance checks become feasible without complex digital interfaces. The mechanical display is familiar to many workshop technicians, reduces dependency on batteries and simplifies integration into established inspection routines. This balance of resolution and repeatability suits routine production sampling as well as more demanding verification tasks. Robust contact design for industrial wear and longevity A carbide measuring head and hardened measuring faces deliver abrasive resistance where it matters most, extending service life in metalworking environments. The matt chrome‑plated device holder provides stable guidance and resists surface wear, while the instrument’s measuring range of 50–180 mm and measuring depth of 150 mm make it suitable for a broad set of internal diameters and deeper bores. The set includes a comprehensive set of measuring pins (17) and gauge shims (1, 2, 3, 4), enabling rapid adaptation to different bore profiles and reducing downtime for setup. Practical handling and workshop integration Designed for workshop conditions, the analogue construction keeps operation straightforward: familiar adjustment and visual comparison speed up routine inspections. The instrument’s configuration supports straightforward calibration and traceable checks within standard metrology workflows, and the labelled components simplify inventory and tooling lists for purchasing departments. With a compact operating concept and clearly legible dial, the device minimises training time while maintaining measurement integrity in daily use. For robust internal measurement tasks rely on the Metav IndustryLine M208.254 — contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply directly from our warehouse Technical data Article number: M208.254 GTIN: 4061905044717 Type: Internal fine measuring instrument (analogue) Manufacturer: Metav IndustryLine Core technical data Measuring range: 50–180 mm Resolution: 0.01 mm Repeatability: 0.005 mm Measuring depth: 150 mm Measuring pins: 17 Extensions: 50 mm Special features Carbide measuring head Matt chrome‑plated device holder Hardened measuring faces Gauge shims included: 1, 2, 3, 4 Analogue dial display FAQ What measuring range does the instrument cover? The M208.254 covers an internal measuring range of 50–180 mm, making it suitable for standard workshop bore inspections. What are the resolution and repeatability specifications? The instrument provides a resolution of 0.01 mm and a repeatability of 0.005 mm, supporting consistent quality checks. Are the measuring faces durable for industrial use? Yes. The M208.254 is fitted with a carbide measuring head and hardened measuring faces for long‑term wear resistance. Which accessories are supplied with the instrument? The M208.254 is supplied with a set of measuring pins (17) and gauge shims (1, 2, 3, 4) to accommodate a range of bore geometries. For which applications is this instrument suitable? This internal fine measuring instrument is ideal for workshop and quality‑control tasks such as bore inspection, component verification and comparative measurement during production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-400mm Inside Setting Device Horizontal/Vertical Adjustment, Lapped Measuring Jaws, Transport Case - Metav IndustryLine
Combine horizontal and vertical adjustment, a 50–400 mm setting range and lapped measuring jaws for consistent, workshop-ready gauge alignment. Order the setting fixture directly via Metav Werkzeuge or ask our consultants for specification support. Setting fixture for internal dial gauges M208.030 — adjustable horizontal & vertical, 50–400 mm (Metav IndustryLine) Setting fixture for internal dial gauges M208.030 provides a compact, stable reference for the calibration and pre‑setting of internal dial indicators and fine measuring instruments across inspection benches and workshop tables. Adjustable for horizontal and vertical setting Wide setting range 50–400 mm Lapped measuring jaws 9×19×100 mm 25 mm setting depth for recessed gauges Reliable alignment that reduces setup time The fixture offers horizontal and vertical adjustment, enabling alignment of internal dial gauges without repositioning the workpiece. The 50–400 mm setting range covers common inspection tasks in metalworking and assembly, reducing the need for multiple specialised tools. By allowing the instrument to be presented to a controlled reference surface, this tool increases repeatability and shortens inspection cycles — a clear efficiency gain for production and quality control. Precision contact surfaces for consistent readings Equipped with lapped measuring jaws sized 9×19×100 mm, the device delivers a flat, wear‑resistant contact face that preserves measurement integrity over repeated use. The 25 mm setting depth allows secure engagement with recessed or narrow‑neck internal indicators, ensuring that contact geometry remains constant. Together with the unit’s mass (approx. 10.4 kg) the result is a stable platform that minimises vibration and operator influence, translating directly into reliable measurement outcomes. Workshop-ready design that supports everyday quality control The construction emphasises practical handling: sturdy geometry and clear adjustment axes make orientation changes quick and unambiguous, while the compact footprint keeps the fixture at hand on inspection benches. As part of the Metav IndustryLine, the component is intended for regular workshop use where robust, repeatable setting operations are required. The combination of stable mass, precise contact faces and versatile adjustment addresses both routine checks and occasional special measurements with confidence. Contact Metav Werkzeuge today to discuss the Metav IndustryLine M208.030 setting fixture and ensure the right configuration for precise internal dial indicator alignment. Technical data SKU: M208.030 GTIN: 4061905045158 Weight: 10.4 kg Facts Setting range: 50–400 mm Setting depth: 25 mm Measuring jaws: 9×19×100 mm Special features Adjustment: horizontal and vertical possible Material: lapped measuring jaws FAQ What applications is this setting fixture intended for? The setting fixture M208.030 is designed for the pre‑setting and alignment of internal dial gauges and fine measuring instruments in workshop and inspection environments. Does the device support recessed internal indicators? Yes, the fixture provides a 25 mm setting depth that facilitates secure contact with recessed or narrow internal indicators. How does the fixture improve measurement repeatability? Repeatability is improved by the combination of lapped measuring jaws, the unit’s mass for stability and the ability to orient the instrument horizontally or vertically, which keeps contact geometry consistent. Is the M208.030 suitable for routine production inspections? The robust design and wide 50–400 mm range make the M208.030 well suited to regular production and quality control tasks where repeatable, fast pre‑setting is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-70mm Measuring Pins Set, 4-Piece, 6mm Shank - Metav IndustryLine
Compact four-piece set of measuring pins for internal inspection tasks, covering a measuring range 50–70 mm with 6 mm shanks for straightforward integration into fine‑measurement workflows. Benefit from precise, repeatable contact points and simple inventory handling to keep inspection routines efficient. Order or request matching accessories through Metav Werkzeuge for immediate supply. M208.052.BZ2 measuring pins — accessory set for internal fine measurement, 50–70 mm range, 6 mm shank (Metav IndustryLine) The M208.052.BZ2 measuring pins form a compact accessory set designed to support internal fine‑measurement devices such as the 208.023, providing controlled contact geometry across a 50–70 mm span Precision‑machined for consistent repeatability Compatible with 208.023 internal measuring device Lightweight set, easy to store and handle Consistent results for routine internal measurements The set delivers precision contact points that reduce variation in successive internal checks. Manufactured to tight tolerances, the pins support reproducible probing where dimensional stability matters; this improves statistical process control by lowering measurement scatter and limiting rework. The combination of controlled geometry and firm contact ensures repeatability when inspecting bores, recesses or stepped features, making the set suitable for regular quality checks in machine shops and inspection benches. Fast, reliable integration into existing fine‑measurement kits Engineered for straightforward fitment, the pins use a 6 mm shank to mate with standard holders and adapters, enabling quick changes between sizes without special tools. The compact design of the set reduces downtime during changeover and keeps handling simple during repetitive tasks. Compatibility with internal fine‑measurement instruments — notably models in the 208 series — allows seamless extension of an inspection fleet, improving throughput without compromising measurement integrity. Practical supply and quality backing for workshop use Supplied as a four‑piece set, the pins combine small storage footprint with immediate availability for common internal measurement sequences. As part of the Metav IndustryLine, the set benefits from the brand’s European distribution and quality filter in Emmerich, which helps ensure consistent product delivery to workshops and technical departments. For procurement and stocking, the set represents a pragmatic way to standardise internal measuring accessories while maintaining control over inspection capability. For specific matching accessories or to confirm compatibility for inspection equipment, contact Metav Werkzeuge quoting M208.052.BZ2 by phone +49 2822 7131930 or email info@metav-werkzeuge.com for expert advice and rapid supply Technical data Article number: M208.052.BZ2 GTIN: 4054469179001 Tariff number: 90179000 Pieces per set: 4 Facts Measuring range: 50–70 mm Shank diameter: 6 mm Weight: 0.02 kg Aufnahme: 6 Special features Accessory for internal fine‑measurement instruments (compatible with 208.023) Category: Measuring device accessory Brand: Metav IndustryLine FAQ What measuring range do these pins cover? The set covers a measuring range of 50–70 mm, supplied as four interchangeable pins for staged internal measurements. Which instruments are these pins compatible with? The pins are intended as an accessory for internal fine‑measurement devices and are explicitly compatible with the 208.023 series; the 6 mm shank matches common holders used in those devices. How many pins are included and what is the item reference? Four pins are included in the set; the product is listed under reference M208.052.BZ2 in the Metav IndustryLine range. Is the material or coating specified for the pins? Material and coating are not specified in the available product data. Can these pins be used for routine inspection in production environments? Yes, the pins are designed for routine internal checks and provide repeatable contact geometry suitable for regular quality control tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Extension For IFMG 160-250/250-450mm, M14 Thread - Metav IndustryLine
Take advantage of a 50 mm increase in measuring reach combined with secure M14 mounting and a lightweight 20 g design to access confined areas without disrupting measurement stability; order the extension directly via Metav Werkzeuge or contact our consultants for tailored advice. M208.026.V1 50 mm extension — Extension for IFMG measuring heads with M14 thread (Metav IndustryLine) The M208.026.V1 50 mm extension is a compact accessory that lengthens IFMG measuring setups for precise checks in restricted or deep features while retaining stable attachment via an M14 interface 50 mm additional measuring reach M14 thread for secure attachment Compatible with IFMG 160–250/250–450 mm Reach deeper features while keeping measurement integrity The 50 mm extension adds measurable reach to IFMG heads without compromising precision. By keeping lateral forces and extra mass to a minimum — the extension weighs just 0.02 kg — the measuring chain maintains repeatability and avoids increased probing error. The M14 connection provides a mechanically secure interface, ensuring that the extension stays concentric to the measuring axis; this reduces alignment error and preserves the original instrument's calibration characteristics. For production environments where small changes can cascade into rework, the extension delivers a pragmatic way to inspect recessed bores and internal steps with confidence. Practical compatibility for everyday metrology tasks Designed for straightforward integration, the accessory is compatible with IFMG 160–250 and 250–450 mm measuring heads and fits a range of models including 208.025, 208.026, 208.425, 208.426, 208.428 and 208.429. The compact, robust geometry makes it suitable for confined workspaces and stepped components where standard probes cannot reach. In workshop or inspection-lab settings this means fewer improvised setups and faster measurement cycles: extend the probe length when needed and return to the base configuration in seconds, preserving measurement traceability and workflow efficiency. Integrates into measurement kits to boost throughput As a lightweight accessory from Metav IndustryLine, this extension supports modular metrology strategies: extend existing gauges rather than stocking alternative heads. The small additional length lets teams perform otherwise awkward measurements with the original instrument, cutting setup time and lowering tool inventory. Its minimal added inertia helps operators retain a consistent feel during manual measuring, which supports reproducible results across multiple shifts and operators. The result is a simple, cost-effective enhancement that keeps inspection processes lean and reliable. Contact Metav Werkzeuge today to add the Metav IndustryLine M208.026.V1 extension to your inspection kit — call +49 2822 7131930 or email info@metav-werkzeuge.com for product matching and ordering support Technical data Article number: M208.026.V1 GTIN: 4054469163185 Weight: 0.02 kg Extension length: 50 mm Facts Tariff number: 90179000 Aufnahme: M14/18 Category: Zubehör eClass: 21170310 Special features Compatible models: 208.025, 208.026, 208.425, 208.426, 208.428, 208.429 Application: Extension for IFMG 160–250 / 250–450 mm measuring heads Storytrigger: Zubehör FAQ Which measuring heads are compatible with this extension? The extension is compatible with IFMG 160–250 and 250–450 mm heads and fits models such as 208.025, 208.026, 208.425, 208.426, 208.428 and 208.429 as stated for the M208.026.V1. How is the extension mounted to the measuring head? Mounting is via an M14 threaded interface; the M208.026.V1 secures directly to the IFMG head using the M14 connection for stable alignment. Will the extension affect measurement accuracy? The M208.026.V1 is lightweight (0.02 kg) and designed to keep additional inertia low so that measurement repeatability and precision remain largely unchanged for typical workshop inspections. For which measurement tasks is this extension most suitable? The accessory is ideal for internal measurements in confined bores, stepped features and recessed areas where the standard probe cannot reach; it expands the functional range of existing IFMG setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50–160mm Digital Internal Micrometer 0.01mm Readout, Reversible Measurement Force ≤2.2N, Supplied in Case - Metav IndustryLine
Take advantage of the combination of 0.01 mm accuracy, a 50–160 mm measuring range and a clear digital readout for dependable internal measurements. Order directly via Metav Werkzeuge or consult our specialists for integration into inspection routines. Digital internal fine measuring instrument, 50–160 mm, resolution 0.01 mm — Metav IndustryLine The Digital internal fine measuring instrument, 50–160 mm is a standard‑class internal gauge that brings workshop‑grade precision to bore and groove inspection, combining a compact footprint with a clear digital dial for rapid readings. Digital readout 0.01 mm Measuring range 50–160 mm Reversible measuring direction Preset zero for fast reference Consistent, workshop-ready precision for internal measurements This instrument provides a resolution of 0.01 mm and an accuracy of 0.01 mm, giving a measurable benefit where repeatability and traceable readings are required in production control. Classified in the Standard range for its 50–160 mm span, the device is optimised for typical machine‑shop and metalworking tasks where reach and stiffness balance is essential. The built‑in digital readout makes results immediately comparable and reduces transcription errors during batch inspections. Reduced measurement variability through controlled contact and presetting A low measuring force ≤ 2.2 N and a preset function for setting a clear starting value help to lower operator‑introduced variance and speed up repetitive checks. The instrument’s measuring direction is reversible, enabling flexible access inside bores and recesses without reorientation of the whole assembly, while a measuring depth of 150 mm allows secure probing of deeper features without compromising alignment. Flexible pin arrangement for a broad range of internal diameters The tool includes a set of 12 measuring pin positions covering 50–105 mm nominal positions with a stated positional tolerance of ±0.7 mm, and the measuring pins have a diameter of 6 mm. This arrangement supports reliable contact with internal surfaces and simplifies switching between nominal diameters; an extension of 55 mm is available to reach slightly recessed areas. Included pass shims of 0.5, 1.0, 2.0 and 3.0 mm assist calibration and bench checks. Ready for quality checks and inline verification Equipped with a digital dial gauge (readout 0.01 mm) and a preset function, the instrument is suited for routine quality assurance and inline verification tasks where clear numeric output and reproducible setups matter. Its design emphasises fast repeat measurement cycles and easy comparison against tolerance limits, helping to uphold production throughput while maintaining dimensional control. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine internal fine measuring instrument can streamline inspection workflows and to request a tailored quotation Technical data Article number: M208.264 Description: Digital internal fine measuring instrument, 50–160 mm, resolution 0.01 mm Manufacturer: Metav IndustryLine Core figures Measuring range: 50–160 mm Resolution / readout: 0.01 mm Accuracy: 0.01 mm Measuring depth: 150 mm Measuring pin diameter: 6 mm Measuring pin positions: 12 Measuring force: ≤ 2.2 N Extension: 55 mm Pass shims: 0.5 / 1.0 / 2.0 / 3.0 mm Special features Digital dial gauge, readout 0.01 mm Preset start value (zero) Reversible measuring direction 12 pin positions covering 50–105 mm (±0.7 mm positional data) Designed for internal measurements of bores, grooves and recesses FAQ How accurate is the device for routine control tasks? The instrument offers a resolution of 0.01 mm and an accuracy of 0.01 mm, making the Metav IndustryLine internal fine measuring instrument suitable for standard workshop quality control and production checks. What is the usable measuring depth for internal features? The tool provides a measuring depth of 150 mm, which covers most bore and recess inspections encountered in general metalworking and fixture checking. Are the measuring pins arranged for quick changeover between diameters? Yes. The design includes 12 pin positions across the nominal range (50–105 mm) with positional data ±0.7 mm and a pin diameter of 6 mm, allowing rapid selection of the appropriate contact geometry. Does the instrument support repeatable starting values for batch inspections? A preset function is provided to set a defined start value, enabling consistent reference points across multiple workpieces and reducing setup time during series inspections. Which inspection tasks is the instrument intended for? The device is intended primarily for internal diameter and groove measurements in workshop and production environments where a 50–160 mm range and clear digital readout expedite routine dimensional checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
55mm Extension for Internal Fine Measuring Instrument 50-160mm, For Models 208.024/208.054 - Metav IndustryLine
Take advantage of extended reach, precise repeatability and simple compatibility with common internal fine measuring instruments for reliable inspection workflows — order the extension directly via Metav Werkzeuge or consult our advisors for application advice. 55 mm extension for internal fine measuring instrument 50–160 mm (for M208.024 / M208.054) 55 mm extension for internal fine measuring instrument 50–160mm for 208.024 and 208.054 adapts the measuring range of the base internal gauge to reach confined bores and deeper cavities while maintaining stable alignment. *Extends internal measuring reach by 55 mm *Compatible with M208.024 and M208.054 *Precision fit for reproducible measurements *Minimal added mass (0.02 kg) for balance Extended reach without compromising measurement reliability The 55 mm extension increases the effective probing depth of the internal fine measuring system, enabling access to features that lie beyond the standard jaw length. By adding measured reach rather than altering technique, the accessory preserves the instrument’s precision and repeatability. This approach reduces the need for makeshift fixtures and repeat set-ups, streamlining inspection tasks in production and quality control. The extension is engineered to maintain the original alignment of the gauge so that the additional length does not introduce measurable runout or variability. Stable attachment and workshop-ready handling Designed for a secure mechanical interface with the base device, the accessory offers a precision mating surface and stable seating to ensure reproducible results across multiple measurements. At just 0.02 kg, the extension contributes only minimal additional mass, keeping the gauge well balanced and simple to handle during manual inspection. Compatibility with the specified models — M208.024 and M208.054 — guarantees that the accessory integrates with existing measuring heads and calibration routines without need for modification, supporting efficient tool changeovers in busy workshop environments. Fits the standard class of internal fine measuring instruments This accessory is intended for internal fine measuring devices operating in the Standard class (measuring ranges up to 300 mm) and is particularly suited to gauges covering the 50–160 mm span. It is therefore appropriate for general machine‑shop measurements, component inspection and small-assembly quality checks where extended internal reach is required. The extension simplifies measurement of deeper bores and recesses while retaining the original gauge’s measurement protocol, making it a practical addition for inspection benches and incoming goods controls alike. For tailored compatibility checks or to request this Metav IndustryLine 55 mm extension for M208.024 / M208.054, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance and supply. Technical Data Article number: M208.054.V Manufacturer: Metav IndustryLine GTIN: 4054469179032 Tariff number: 90179000 Weight: 0.02 kg Facts Extension length: 55 mm Intended measuring range: 50–160 mm Category: Accessory / Measuring instruments File size (image): 5,577 bytes Special features Compatible with models M208.024 and M208.054 Accessory for internal fine measuring instrument Category path: Measuring instruments > Accessories Storytrigger: accessory FAQ What does this extension provide for internal measurements? The extension increases the reach by 55 mm, enabling deeper internal measurements while maintaining the calibration and alignment of the internal fine measuring instrument. Which instruments are compatible with the extension? Compatibility is specified for M208.024 and M208.054; the accessory is designed to mate directly with these models for reliable, repeatable attachment. Is the extension suitable for standard workshop inspection tasks? Yes, the accessory is intended for instruments in the Standard class and is well suited to general machine‑shop inspection and quality control within the 50–160 mm range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5–15 mm Digital Internal Probe 0.005 mm Resolution, Rotating Display, Rounded Tips, Supplied in Case - Metav IndustryLine
Take advantage of the combination of fine resolution, a compact 5–15 mm measuring range and robust R0.3 tips for fast internal inspections; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital internal probe 5–15 mm – 0.005 mm resolution (Metav IndustryLine) A Digital internal probe 5–15 mm designed for rapid measurement of bores, grooves and other internal features in workshop and inspection environments. 5–15 mm measuring range 0.005 mm resolution for fine accuracy Rotatable digital display with data, TOL and UNIT keys Rounded measuring tips R0.3 for delicate surfaces High-precision readings for repeatable inspection results The instrument combines a 5–15 mm measuring range with a fine 0.005 mm display increment, delivering measurement detail that supports quality control in small-bore components. An indicated accuracy of approximately ±0.02 mm places the unit in the class suitable for routine machine‑shop inspections and laboratory checks where repeatability matters. The rounded measuring tips (R0.3) protect component surfaces and help maintain stable contact geometry, which reduces variation between successive measurements. Such features make the tool particularly useful where fast, reproducible data from internal features is required. Ergonomic operation speeds up measurement cycles A rotatable digital display with ON/OFF, ABS/INC/UNIT, TOL, DATA and MODE keys enables straightforward operation and on-the-fly setting changes while the instrument remains in the measuring position. The arrangement of controls and the rotatable screen reduce repositioning time during serial checks, shortening cycle times without compromising precision. The presence of a DATA control supports direct transfer or recording of measured values, improving traceability in inspection routines and easing documentation during lot sampling or incoming inspection. Built for workshop conditions and delicate components Constructed to balance robustness and handling, the instrument’s mass supports stable contact while remaining manageable on the bench; the specified weight assists in damping hand‑induced vibration during short measurements. The R0.3 rounded tips reduce marking on soft surfaces, making the device suitable for components that require careful handling alongside accurate internal measurement. Classified under precision dial‑gauge devices, it integrates naturally into inspection benches and can complement callipers and internal micrometres for a complete metrology toolkit. For measurement tasks that demand 0.005 mm increments, contact Metav Werkzeuge in Emmerich to discuss the Metav IndustryLine digital internal probe (M209.111) and arrange purchase or technical consultation Technical data Article number: M209.111 GTIN: 4061905045967 Brand: Metav IndustryLine Category: Messuhren Numbers / Core technical data Measuring range: 5–15 mm Resolution / reading: 0.005 mm Stated accuracy: 0.02 mm Tip radius: R0.3 Weight: 0.74 kg Special features / Design Digital, rotatable display with ON/OFF, ABS/INC/UNIT, TOL, DATA, MODE keys Rounded measuring tips for gentle contact Intended for rapid measurement of bores, grooves and internal features Compact form factor suitable for bench and workshop inspection FAQ Is the measuring range suitable for small bore inspection? The device measures from 5 to 15 mm, making it suitable for small‑bore inspections and internal features within that span; reference: Digital internal probe 5–15 mm (Metav IndustryLine, M209.111). What display resolution and accuracy can be expected? The instrument provides a 0.005 mm display increment with an indicated accuracy around ±0.02 mm, offering detailed readings for routine quality checks. Are the measuring tips safe for delicate surfaces? Yes. The unit is equipped with rounded measuring tips (R0.3) that reduce marking risk and preserve component surfaces during internal measurement. Does the display support tolerance and data functions? The rotatable digital display includes TOL and DATA controls plus ABS/INC/UNIT keys, enabling tolerance checks and value transfer options via the display interface. What applications suit this instrument best? Designed for quick measurement of bores, grooves and similar internal features, it is ideal for workshop inspections, incoming part checks and short‑run quality control where compact internal measuring is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6-35mm Internal Setting Device Adjustable Stop Height And Width, Lapped Measuring Jaws, Supplied In Case - Metav IndustryLine
Benefit from precise, repeatable setups thanks to an adjustable stop and lapped measuring jaws that reduce setup time and minimise measurement uncertainty; ideal for internal dial‑gauge preparation and inspection tasks. Order the setting fixture directly via Metav Werkzeuge or contact our consultants for tailored advice. Setting device for internal fine measuring instruments, 6–35 mm, stop 80×40 — adjustable stop and lapped jaws (Metav IndustryLine) The Setting device for internal fine measuring instruments, 6–35 mm, stop 80×40 is a compact calibration fixture intended for preparing internal dial gauges and fine‑measuring instruments in workshop and inspection environments. Adjustable stop, height and width For internal dial gauge setup 6–35 mm Lapped measuring jaws 9×19×75 mm Delivered in protective transport case Consistent, measurable set‑ups that save time The fixture delivers repeatable settings for internal measurement tools by combining a clearly defined range of 6–35 mm with an 80×40 mm adjustable stop. This makes it straightforward to reproduce reference positions for dial gauges and comparable internal measuring devices, reducing the need for iterative adjustments and lowering scrap rates. The combination of rigid construction and finely adjustable stop enables reliable datum points that support efficient quality control and faster throughput in batch inspection routines. Integrates into existing workflows with minimal effort Designed for straightforward use on the workshop bench or inspection table, the device allows rapid height and width adjustment of the stop to match a variety of measurement tasks. The lapped measuring jaws provide a stable contact surface that minimises lateral play and ensures a clean seating for the gauge or probe. For teams seeking to reduce set‑up time, this translates into quicker changeovers between different diameters and faster preparation of internal measuring instruments for both repetitive production checks and sporadic precision tasks. Robust construction for workshop endurance and traceable results Weighing 6.6 kg, the fixture has sufficient mass to remain stable during setting operations while remaining manageable for handling and positioning. The 9×19×75 mm lapped jaws combine dimensional accuracy with wear resistance, offering a durable reference interface for prolonged use. Supplied in a protective transport case, the unit is suited to workshop environments where transport between workstations or secure storage is required. Its clear mechanical design supports traceability in inspection procedures and helps maintain the integrity of subsequent measurements. Choose the Metav IndustryLine setting fixture for dependable internal gauge preparation and contact Metav Werkzeuge for specialist advice and delivery from Emmerich Technical data Article number: M208.032.2 GTIN: 4061905045592 Manufacturer: Metav IndustryLine Facts Range: 6–35 mm Setting depth: 35 mm Weight: 6.6 kg Jaw size: 9×19×75 mm Special features Lapped measuring jaws Variable stop adjustable in height and width Stop dimensions: 80×40 mm Delivered in protective transport case FAQ What is the usable measuring range of the fixture? The usable measuring range is 6–35 mm as specified for the setting device for internal fine measuring instruments. Are the jaws finished to a precision surface? Yes, the unit is supplied with lapped measuring jaws (9×19×75 mm) that provide a precisely finished contact surface. Can the stop be adjusted for different diameters and heights? The fixture features a variable stop adjustable in height and width, allowing adaptation to a wide variety of internal gauge set‑ups. Is the device suitable for workshop transport? The product is supplied in a protective transport case to facilitate safe movement between workstations. Which manufacturer and article number identify this product? This setting fixture is offered by Metav IndustryLine and listed under article number M208.032.2. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60.7mm Internal Bore Gauge Colour 1.54" Touchscreen Wireless USB, 1200mm Depth - Microtech Metrology
Take advantage of high-precision measurement within a focused bore range, combined with versatile data transfer and a compact touchscreen interface; the result is reliable inspection throughput and straightforward integration into existing quality workflows. Order the device through Metav Werkzeuge or consult our specialists for application advice. Internal Precision Gauge — 59.3–60.7 mm range, Colour 1.54" touchscreen (Microtech Metrology) The Internal Precision Gauge is designed to deliver repeatable internal diameter measurement in the 59.3–60.7 mm band for large-bore components, combining fine readout resolution with modern data output options for seamless documentation and process control. Colour 1.54" touchscreen display Wireless and USB data output Measurement range 59.3–60.7 mm Accurate measurement for micro-bore inspection The Internal Precision Gauge provides a narrow but critical measurement band, optimised for components where tight tolerances are decisive. With a specified range of 59.3–60.7 mm and a reported reading resolution of 0.0001 mm, the instrument supports high‑precision checks that reduce uncertainty in pass/fail decisions. This focused capability suits routine in‑line inspection tasks and special checks where consistent repeatability matters; the compact sensing geometry limits lever arm effects, helping to maintain stable contact and minimise operator‑induced variation. Data connectivity that speeds quality control Measured values are made available directly via Wireless and USB outputs and shown on a Colour 1.54" touchscreen, enabling rapid capture and transfer into inspection logs or SPC systems. The combination of local visual feedback and digital export streamlines traceability and reduces data transcription errors, which shortens cycle times in documentation-heavy environments. For production cells that rely on prompt feedback, the instrument’s connectivity supports quicker interventions and improves overall process yield. Designed for deep-bore capability and handling A measurement depth of 1,200 mm extends the device’s utility to longer internal features while preserving handling comfort. The mechanical arrangement has been conceived to balance reach with stiffness so that measurements along the full depth remain reproducible. Where accessibility and alignment are demanding, the tool’s geometry and sensing interface reduce the need for repeated set‑ups, thus saving operator time and lowering the risk of cumulative measurement error across a production run. Practical benefits for workshop integration The unit’s compact display and transfer options make it straightforward to incorporate into existing metrology routines; records can be centralised quickly and analysed without manual re‑entry. The instrument suits machine shops and inspection departments that require a dedicated gauge for a single, critical bore diameter — helping to avoid over‑engineering and to concentrate investment where it delivers measurable quality improvements. The manufacturer’s focus on metrology-grade construction supports steady performance under regular use. For stock availability, technical clarification or to discuss how Microtech Metrology instruments fit into existing measurement chains, contact Metav Werkzeuge in Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 — our team will advise on delivery and application specifics. Technical data Article number: 138006007 GTIN: 4061905457678 Manufacturer: Microtech Metrology Facts Measurement range: 59.3–60.7 mm Measurement depth: 1,200 mm Reading resolution: 0.0001 mm Display: Colour 1.54" touchscreen Special features Data output: Wireless + USB Suitable for calipers: calibre 60 mm Category: Feinmessgeräte FAQ How precise is the gauge for internal diameter checks? The instrument offers a reading resolution of 0.0001 mm, enabling fine discrimination within its 59.3–60.7 mm measurement range for consistent internal diameter checks. Can measurement data be exported directly to inspection software? Yes — the device supports Wireless and USB data output so measured values can be transferred to SPC or documentation systems without manual transcription. Is the gauge suitable for long, hard‑to‑reach bores? With a measurement depth of 1,200 mm, the tool is intended for extended internal measurements while maintaining the handling characteristics needed for reproducible results. Which category of calipers or precision tools does this device correspond to? This product falls into the micro range for calipers (10–100 mm), offering targeted performance for fine internal measurements in constrained bore sizes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
6–10 mm Gauge Pins Set, 9 Pieces For Internal Fine Gauges - Metav IndustryLine
Take advantage of precise, ready-to-fit replacement pins and a compact 6–10 mm diameter range to keep internal inspections fast and repeatable; the set of nine measuring pins is ideal for routine calibration and probe checks. Order the components directly via Metav Werkzeuge or contact our consultants for application advice. 9-piece measuring pin set for M208.018 (6–10 mm) — Metav IndustryLine precision accessory The measuring pin set for M208.018 provides matched nominal diameters for internal fine measuring instruments, intended as replacement and extension pins for inspection and gauge verification *Precision fit for M208.018 instruments *Range 6–10 mm across calibrated steps *Set of nine hardened test pins *Compact, workshop-friendly format Accurate, repeatable internal checks that save inspection time The set delivers precision nominal diameters across a compact range of 6–10 mm, enabling repeatable internal verifications and quick functional checks of fine measuring probes. Manufactured as an accessory to established measuring fixtures, the pins reduce the need for frequent adjustments and rework by providing stable reference diameters. Because the components are supplied as a matched set, measurement drift during routine checks is minimised, helping to shorten inspection cycles and maintain production throughput. Designed for seamless compatibility and minimal downtime Compatibility with the M208.018 series is the defining practical benefit: the pins are shaped to integrate directly with internal fine measuring instruments, simplifying replacement and extension tasks. The set of nine nominal sizes removes ambiguity when selecting test diameters, streamlining tool preparation and reducing tool-change time. In a busy workshop environment, this translates into fewer interruptions to quality control processes and clearer traceability of inspection steps. Practical stock design for the workshop and traceable inventory Supplied as a dedicated set, the components are easy to store and document within existing asset-management routines. The compact format supports efficient storage on the bench or in an inspection kit, while SKU referencing and GTIN make procurement and record-keeping straightforward. Combined with Metav’s distribution from Emmerich, the accessory supports predictable replenishment, enabling a dependable baseline of measuring capability for both maintenance and serial inspection tasks. Contact Metav Werkzeuge for tailored application advice and secure supply from Emmerich — reference SKU M208.018.BZ for ordering and technical details Technical data Article number: M208.018.BZ GTIN: 4054469146614 Weight: 0.02 kg Pieces per set: 9 Tariff number: 90179000 Facts Diameter range: 6–10 mm Piece count: 9 Compact workshop format Accessory classification: measuring pins Special features For use with M208.018 internal fine measuring instruments Replacement and extension pins for internal checks Supplied as a matched set for repeatability Metav IndustryLine accessory FAQ What diameters are included in the set? The set contains nine nominal diameters covering the range 6–10 mm, supplied as a matched group for internal checks. Is this compatible with the M208.018 instrument? Yes; the pins are designed as accessory components for the M208.018 series and fit directly for replacement and extension purposes. How is the set delivered and referenced for ordering? The accessory is supplied as a set and referenced under SKU M208.018.BZ and GTIN 4054469146614 for procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6–10mm Internal Micrometer Carbide Measuring Faces 60mm Depth 0.008mm Accuracy - Microtech Metrology
Take advantage of the combination of precise internal measurement capability, carbide measuring faces and compact 6–10 mm range for reliable quality control in tight bores. Order the instrument directly via Metav Werkzeuge or consult the experts for application advice and fast dispatch from Emmerich. Microtech Metrology Internal Dial Gauge — analogue internal gauge with carbide measuring faces and 6–10 mm range Microtech Metrology Internal Dial Gauge is an analogue precision instrument for accurate internal measurements in toolmaking, small-part inspection and maintenance checks Carbide measuring faces for wear resistance Measuring range 6–10 mm for fine internal checks Resolution 0.01 mm with high repeatability Precision for confined bores The instrument delivers highly reproducible internal measurements thanks to its 0.01 mm readout and a stated accuracy of 0.008 mm, making it suitable for demanding inspection tasks where small deviations matter. The analogue dial provides an immediate visual reference for differential readings and quick pass/fail checks without software setup. As a compact internal gauge designed for close-tolerance work, it supports consistent quality control in small diameters and contributes to reduced rework rates in batch production. Durable contact and practical reach Equipped with carbide measuring faces, the gauge resists wear from repeated contact and abrasive surfaces, prolonging useful life in workshop environments. The 60 mm measuring depth enables access into deeper bores and recesses than standard short-contact devices, while the compact overall form factor classifies the tool within the micro segment for precision instruments — ideal for watchmaking, small assemblies and fine mechanical parts. The robust contact material plus straightforward dial reading minimise operator-induced variation and simplify routine checks. Ready for workshop inspection and integration The design supports rapid spot checks and serial inspection workflows: reliable mechanical construction, easy mounting in test fixtures and clear scale interpretation reduce cycle time on the shop floor. The instrument suits settings where a simple, robust analogue solution is preferred over electronic systems, and it complements digital systems where a mechanical visual check remains useful. For procurement and technical clarification, Metav Werkzeuge offers detailed stock information and can advise on accessory compatibility or measurement protocol adaptation. For precise internal measurement needs, contact Metav Werkzeuge to discuss the Microtech Metrology internal dial gauge and secure rapid delivery from Emmerich. Technical Data Article number: 132010100 GTIN: 4061905453359 Brand: Microtech Metrology Category: Feinmessgeräte SKU: 132010100 Facts Measuring range: 6–10 mm Resolution: 0.01 mm Accuracy: 0.008 mm Measuring depth: 60 mm Display: analogue dial Special features Carbide measuring faces Internal precision gauge Analogue instrument FAQ What is the measuring range of this instrument? The measuring range is 6–10 mm, suitable for fine internal checks in small bores. What resolution and accuracy can be expected? The instrument offers a resolution of 0.01 mm and a stated accuracy of 0.008 mm for reproducible results. Are the measuring faces wear-resistant? Yes, the gauge is supplied with carbide measuring faces that provide enhanced wear resistance during repeated use. Is this an analogue or digital device? This is an analogue internal dial gauge with a mechanical dial display for immediate readings. Can the instrument reach deeper internal features? The instrument provides a measuring depth of 60 mm, allowing access to deeper bores and recesses typical in small-part assemblies. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
6–10mm Internal Micrometer Carbide Measuring Faces, 0.001mm Vernier, 60mm Depth, Calibrated Certificate - Microtech Metrology
Benefit from dependable internal bore measurement with carbide measuring faces, ±0.003 mm accuracy and a compact 6–10 mm micro range that suits fine mechanical work; the 60 mm measuring depth extends capability into recessed bores. Order the instrument directly via Metav Werkzeuge or consult their specialists for application advice. Internal micrometer by Microtech Metrology – carbide measuring faces, 0.003 mm accuracy The Internal micrometer from Microtech Metrology is a compact precision instrument for accurate internal diameter checks in fine mechanics and workshop quality control, combining a micro measurement range with a sensitive dial gauge for reliable readouts. Carbide measuring faces for durable contact High accuracy: 0.003 mm measurement precision Compact micro range: 6–10 mm for fine work 60 mm measuring depth for recessed bores Precise results for micro bore inspection The instrument is tailored to tasks where small internal diameters demand repeatable results: the 6–10 mm span classifies it in the micro range, an ideal band for watchmaking, micro‑components and precision prototypes. A dial gauge readout with a fine reading step supports controlled measurement gestures, while the stated accuracy of ±0.003 mm allows clear pass/fail decisions during production checks. This combination reduces rework and increases throughput by giving engineers a compact tool that delivers verifiable numeric confidence for small‑scale diameters. Durable contact surfaces and practical reach Hard‑facing at the measuring points improves lifetime and contact reliability: carbide measuring faces resist wear and maintain geometry even under frequent use. The instrument’s 60 mm measuring depth extends reach into recessed bores without compromising handling, which is crucial when components have stepped or deep internal features. Robust contact materials plus a mechanically simple readout mean fewer calibration drifts and lower service needs, translating into predictable inspection intervals and lower total cost of ownership for precision shops. Workshop fit and operational clarity Designed for bench use and quick checks, the tool combines mechanical clarity with workplace practicality: the analog dial gauge gives immediate feedback, while the compact form factor supports single‑handed positioning in confined setups. Traceability and part‑to‑part consistency benefit from the instrument’s documented accuracy and stable contact geometry. For procurement and inventory planning, the instrument aligns with standard precision tool workflows and is easy to integrate into existing quality routines without complex software or electrics. For reliable micro bore measurement, request the Microtech Metrology internal micrometer from Metav Werkzeuge in Emmerich — contact via info@metav-werkzeuge.com or +49 2822 7131930 for specification details and supply options Technical Data Article number: 132010800 GTIN: 4061905453366 Manufacturer: Microtech Metrology Category: Precision measuring instruments (internal micrometer) Facts Measuring range: 6–10 mm Maximum range: 10 mm Accuracy: ±0.003 mm Reading: 0.001 mm Measuring depth: 60 mm Analog: Yes Special features Carbide measuring faces Analog dial gauge display Micro range classification (micro) Compact construction for fine mechanical work FAQ What internal diameters does the instrument cover? The internal micrometer measures internal diameters in the range 6–10 mm, making it suitable for very small bore inspection. How accurate and fine is the readout? The instrument provides an accuracy of ±0.003 mm with a dial gauge readout capable of 0.001 mm increments for fine discernment. Are the measuring faces wear‑resistant? Yes, the carbide measuring faces on the Microtech Metrology internal micrometer offer high wear resistance and maintain contact geometry during frequent use. Can it reach recessed bores and stepped features? With a 60 mm measuring depth, the instrument is designed to access recessed bores and stepped internal geometries while remaining easy to position. Is the instrument analogue or digital? This model features an analog dial gauge, offering immediate visual feedback without the need for batteries or digital interfaces. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
70-160mm Internal Bore Gauge Retractable Head, Colour 1.54" Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Benefit from high reproducibility and straightforward data integration thanks to precise measurement capability and Wireless+USB connectivity; the instrument arrives fully ISO 17025 calibrated with a certificate for immediate use in quality control. Order via Metav Werkzeuge or consult our specialists for application support. Microtech Internal Precision Bore Gauge – Wireless+USB, 1.54" Colour Touchscreen The Microtech Internal Precision Bore Gauge is a digital instrument for fast, repeatable internal diameter inspection in workshop and production quality control, designed for the Standard measuring range. Wireless + USB data output for traceable logging Colour 1.54" touchscreen for clear readout and control ISO 17025 calibration included with certificate Precise results for everyday quality control The gauge delivers an accuracy ±0.025 mm, paired with a fine readout 0.0001, which supports clear decision-making during incoming inspection and in-process checks. As a Standard‑range instrument (measuring range 70–160 mm), it balances reach and rigidity for typical workshop components such as housings, sleeves and medium‑sized bores. The combination of tight accuracy and high readout resolution reduces rework and speeds up inspection cycles, providing a measurable productivity advantage on the shop floor. Reliable data flow into inspection systems Integrated Wireless+USB connectivity enables seamless transfer of measurement records to statistical software or a quality management system, cutting manual transcription and the associated error risk. The 1.54" colour touchscreen simplifies mode changes and zeroing, while the digital interface supports exportable logs for audit trails. This setup is particularly useful where traceability and documentation are required for process control or customer specifications. Designed for repetitive use in production environments A compact electronic measuring head and robust housing mean the instrument withstands frequent handling and typical workshop conditions. The extended measuring depth 2000 mm allows access to recessed features while maintaining stability during measurement. Ergonomic controls and a clear display reduce operator fatigue and contribute to consistent measurement technique, which in turn improves reproducibility across repeated checks. Delivered ready for accredited measurement tasks The tool is supplied fully ISO 17025 calibrated; a formal calibration certificate is included with delivery so the device can be incorporated directly into certified inspection procedures. This accreditation supports conformity assessment and simplifies introduction into laboratories and supply chains that mandate traceable measurement uncertainty. Classification as a Standard‑range precision instrument makes it a practical choice for general metalworking and machine‑building quality tasks. Contact Metav Werkzeuge to discuss suitability for specific inspection tasks or to arrange a calibration scope tailored to application requirements — Metav Werkzeuge provides specialist guidance from Emmerich and fast delivery across Europe. Technical data Article number: 139160722 GTIN: 4061905045868 Manufacturer: Microtech Metrology eClass: 21170310 Facts Measuring range: 70–160 mm Min measuring range: 70 mm Max measuring range: 160 mm Accuracy: ±0.025 mm Readout / resolution: 0.0001 Measuring depth: 2000 mm Display: Colour 1.54" touchscreen Data output: Wireless + USB Features Digital internal bore gauge ISO 17025 calibration and certificate included Wireless connectivity and USB interface Compact measuring head for internal diameters Standard range classification for workshop use FAQ Is the gauge delivered calibrated? Yes. The Microtech Internal Precision Bore Gauge is supplied fully calibrated to ISO 17025 and includes the calibration certificate for immediate integration into accredited inspection routines. What is the usable measuring range and typical application? The instrument covers a measuring range of 70–160 mm, making it suitable for standard workshop and machine‑building tasks such as inspections of housings, sleeves and medium‑sized bores. How are measurement records transferred and stored? Measurement data can be exported via Wireless+USB to a PC or quality system; the digital interface supports traceable logging and simplifies SPC or documentation workflows. What level of accuracy and resolution can be expected? The device offers an accuracy of ±0.025 mm with a readout resolution of 0.0001, balancing practical precision with clear readability for routine quality control. Can the gauge reach recessed or deep bores? The instrument includes an extended measuring depth of 2000 mm, providing additional reach for recessed features while retaining measurement stability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
70-160mm Internal Bore Gauge Retractable Measuring Head Digital 0.001mm Resolution ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of high-resolution reading, ISO 17025 traceable calibration and a practical measuring range to streamline internal diameter inspection. Order the instrument directly via Metav Werkzeuge or consult the Metav team for application-specific advice. Internal Precision Bore Gauge – digital readout, ISO 17025-calibrated (Microtech Metrology) Internal Precision Bore Gauge is a digital instrument designed for accurate internal diameter measurement in inspection benches and workshop quality control, particularly for bores and recessed features. Digital readout 0.001 mm ISO 17025 calibration included Measuring range 70–160 mm Accuracy ±0.03 mm Precision that supports repeatable inspection results The gauge delivers a combination of fine resolution and industrial accuracy that fits modern quality processes. With a reading of 0.001 mm and a stated accuracy of ±0.03 mm, the instrument reduces interpretation error and shortens measurement cycles compared with coarse mechanical gauges. Traceable calibration under ISO 17025 means readings can be relied upon for documentation and incoming inspection, and the digital display eliminates parallax when transferring values to inspection reports. The result is a pragmatic tool for shop-floor measurements and laboratory checks alike. Built for reliable internal measurements and deeper bores Designed for internal diameter tasks, this instrument covers a measuring range of 70–160 mm while offering a substantial measuring depth parameter for recessed applications. The stable measuring span balances reach and stiffness so that measurements remain reproducible across a run of components. Where repeatability matters, the digital readout and rigid measurement mechanics support consistent comparisons between batches, making the gauge suitable for small-series production, jig and fixture checks, and precise assembly controls. Easy integration into quality workflows and documentation Calibration and traceability are central to quality assurance. Supplied with an ISO 17025 calibration certificate, the device arrives ready for use in regulated environments and simplifies audit preparation. The instrument’s clear numeric output accelerates data capture into control plans and inspection logs, while its compact footprint keeps it practical at the inspection bench. For procurement, the combination of certified calibration and precise readout translates into less rework, faster acceptance testing and more predictable process capability. Contact Metav Werkzeuge for specialist advice and to request a certified Microtech Metrology internal bore gauge with ISO 17025 calibration Technical data Article number: 139160822 GTIN: 4061905045851 Manufacturer: Microtech Metrology Facts Measuring range: 70–160 mm Resolution (reading): 0.001 mm Stated accuracy: ±0.03 mm Measuring depth: 2000 Special features Digital readout ISO 17025 calibration certificate included Category: Fine measuring instruments Eclass: 21170310 FAQ Is the device supplied with a calibration certificate? Yes. The Internal Precision Bore Gauge from Microtech Metrology is delivered with an ISO 17025 calibration certificate, confirming traceability and documented measurement uncertainty. What measuring range and repeatability can be expected? The instrument covers a measuring range of 70–160 mm with a reading resolution of 0.001 mm and a stated accuracy of ±0.03 mm, suitable for routine internal diameter checks. Is this instrument suitable for workshop and laboratory use? Yes. The combination of a digital readout, compact design and ISO 17025 calibration makes the gauge appropriate for both workshop inspection benches and laboratory quality control. Which identifiers help with ordering or referencing the gauge? Reference SKU 139160822 and GTIN 4061905045851 when specifying the Microtech Metrology internal bore gauge for procurement or documentation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
70-160mm Internal Fine Measuring Gauge Retractable Probe, Digital 0.001mm Resolution ISO 17025 Calibration - Microtech Metrology
Take advantage of a high-resolution digital readout and factory calibration to ISO 17025 for dependable internal inspections; the retractable measuring head improves contact consistency while the compact measuring range supports fast shop-floor checks. Order the Internal Precision Gauge directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology Internal Precision Gauge — digital instrument, 70–160 mm range, retractable head The Internal Precision Gauge is a digital fine measuring instrument intended for precise internal dimension checks in machining and quality control, offering a compact standard-range solution for bores, recesses and counterbores. Digital display with 0.001 mm resolution Calibrated to ISO 17025 with certificate Measuring range 70–160 mm for standard tasks Retractable measuring head for secure contact Consistent precision for inspection and documentation High repeatability reduces rework and speeds throughput. The instrument delivers a resolution of 0.001 mm coupled with an accuracy of ±0.025 mm, giving a measurable improvement over coarse gauges and making it suitable for standard workshop quality assurance. Factory calibration to ISO 17025 comes with a calibration certificate, which supports traceability and simplifies acceptance into internal QA processes. The digital readout provides clear numeric values that minimise reading errors and streamline logging of inspection results. Built for workshop efficiency and reliable handling Designed for everyday use in machine shops, this gauge covers a measuring range of 70–160 mm, classified in the Standard category for its balance of reach and rigidity. The retractable measuring head secures contact in bore measurement and reduces the risk of jamming when probing narrow features. With a measuring depth of 1000 mm, the geometry accommodates deep recesses where extended probe reach is required; the compact form factor keeps handling straightforward and enables rapid sequential measurements on production runs. Applications, benefits and procurement confidence The instrument is suited to production inspection, incoming goods checks and toolroom tasks where internal dimensions are critical. Typical applications include bore diameter checks, counterbore verification and quality control of assemblies. Delivered with an ISO 17025 calibration certificate, the gauge provides documented traceability for audit purposes and builds confidence in measurement results. Choosing a calibrated device reduces initial setup time and helps maintain consistent quality across batches, which aligns with Metav Werkzeuge’s role as a reliable supply partner. For calibrated internal measurements with documented traceability, source the Microtech Metrology Internal Precision Gauge from Metav Werkzeuge in Emmerich — contact their specialists for purchasing and technical guidance Technical data Article number: 139160811 GTIN: 4061905045394 Manufacturer: Microtech Metrology eClass: 21170310 Category: Fine measuring instrument Facts Measuring range: 70–160 mm Resolution: 0.001 mm Accuracy: ±0.025 mm Measuring depth: 1000 mm Display: digital Special features Retractable measuring head Delivered calibrated to ISO 17025 with certificate Suitable for bore, recess and counterbore inspection Compact standard-range design FAQ What measuring range does the instrument cover? The gauge covers a measuring range of 70–160 mm, making it suitable for standard workshop inspection tasks. Is the device supplied calibrated? Yes. The Microtech Metrology Internal Precision Gauge is delivered calibrated to ISO 17025 and includes a calibration certificate for traceability. What accuracy and resolution can be expected? The instrument provides a resolution of 0.001 mm and an accuracy of ±0.025 mm, appropriate for routine quality control and shop‑floor inspections. For which applications is this instrument intended? Typical uses include bore diameter checks, counterbore verification and internal feature inspection in machining and assembly operations. Does the device support deep internal measurements? The gauge offers a measuring depth of 1000 mm, allowing measurement of deeper recesses and extended internal features where needed. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
70-160mm Internal Micrometer Retractable Anvil Digital 0.001mm Resolution ISO 17025 Calibrated - Microtech Metrology
The combination of a digital readout with 0.001 mm resolution, repeatable ±0.015 mm accuracy and delivery with an ISO 17025 calibration certificate makes this instrument a dependable choice for precision internal measurements. Order the Microtech Metrology internal fine bore gauge via Metav Werkzeuge or consult their advisers for application support. Internal fine bore gauge by Microtech Metrology — Digital 70–160 mm, ISO 17025 The Internal fine bore gauge is a digital instrument for precise internal diameter measurement in machine shops, inspection benches and production control. High resolution 0.001 mm display ISO 17025 calibrated with certificate Measuring range 70–160 mm Precision where it counts: reliable numeric control of bores This instrument provides a resolution of 0.001 mm combined with a stated accuracy of ±0.015 mm, a pairing that minimises interpretation error and supports traceable dimensional control. The digital readout reduces parallax and manual reading mistakes, which improves throughput in repetitive inspection tasks. For users accustomed to analogue gauges, the step to a high-resolution digital display means faster decision‑making at the bench and clearer logging of conforming parts. Built for repeatability in workshop and lab environments With a measuring range of 70–160 mm and a measuring depth of 150 mm, the device suits mid‑sized bores commonly found in components, housings and assemblies. The instrument is supplied calibrated to ISO 17025 and includes a calibration certificate, ensuring the result can be accepted in formal quality processes and audit trails. The shallow learning curve of the digital interface reduces operator variation and contributes directly to consistent process control. Practical benefits: handling, documentation and supplier trust The compact measuring head that retracts for safe handling and the robust readout provide durability for daily use in production environments. As a product from Microtech Metrology, the instrument combines metrological design with practical workshop ergonomics: the digital display speeds checks and the calibration status supports compliant incoming or outgoing inspection. For procurement, Metav Werkzeuge acts as a single‑point supplier offering stock depth and a quality filter that simplifies acquisition and reduces supplier overhead. Contact Metav Werkzeuge in Emmerich for a tailored specification, technical datasheet or to arrange prompt delivery of the Microtech Metrology internal fine bore gauge calibrated to ISO 17025 Technical Data Article number: 139160800 GTIN: 4061905044939 Manufacturer: Microtech Metrology Category: Feinmessgeräte eClass: 21170310 Facts Measuring range: 70–160 mm Measuring depth: 150 mm Resolution (display): 0.001 mm Accuracy: ±0.015 mm Readout: Digital Special features ISO 17025 calibration with certificate Retractable measuring head Designed for workshop and laboratory use Supplied by Metav Werkzeuge distribution FAQ What accuracy can be expected from this instrument? The Microtech Metrology internal fine bore gauge offers an accuracy of ±0.015 mm together with a 0.001 mm display resolution, providing reliable results for standard inspection tasks. Which diameters can be measured with this device? Measurement capability covers the range 70–160 mm, making it suitable for medium‑sized bores such as housings, bushings and similar components. Is the instrument delivered calibrated? Yes — the instrument is calibrated to ISO 17025 and supplied with a calibration certificate, supporting traceable measurements and formal quality documentation. How deep can the gauge reach inside a bore? The device has a measuring depth of 150 mm, allowing checks well into deeper bores and recesses while maintaining stability. Which SKU should be referenced for ordering or spare parts? Reference SKU 139160800 (GTIN 4061905044939) when enquiring with Metav Werkzeuge or when ordering accessories and documentation for this Microtech Metrology internal fine bore gauge. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
70-160mm Internal Micrometer Retractable Probe, Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of traceable, workshop-ready measurement with a wide 70–160 mm measuring range and ±0.02 mm accuracy, combined with convenient data transfer via Wireless and USB; order this capability directly through Metav Werkzeuge or consult their experts for integration into existing inspection routines. Microtech Metrology Internal Precision Gauge 70–160 mm — digital instrument with colour touchscreen The Internal precision gauge delivers rapid digital bore measurement for workshop inspection and production quality control, combining a compact footprint with precise, standards-traceable results. Measuring range 70–160 mm Accuracy ±0.02 mm Colour 1.54" touchscreen display Wireless and USB data output Traceable precision that supports quality decisions The instrument provides accuracy of ±0.02 mm, a level suited to routine quality control in metalworking and component inspection. Because the unit is supplied ISO 17025 calibrated with a certificate, documented results can be entered directly into quality records without interim verification steps. This combination of declared accuracy and accredited calibration reduces uncertainty in acceptance testing and supports compliance with internal and customer inspection plans. Seamless data capture to speed inspections Equipped with a colour 1.54" touchscreen display and both Wireless and USB outputs, the gauge simplifies measurement logging and transfer to inspection software or spreadsheets. The native display resolution of 0.0001 mm provides fine readback detail while the stated accuracy remains the guiding metric for decision-making; the difference between resolution and measurement error is explained at the point of use, helping technicians interpret results correctly and avoid overconfidence in raw readouts. Designed for practical workshop use and extended reach With a measuring range of 70–160 mm and a measuring depth of 1000 mm, this digital instrument covers a wide span of internal diameters and access depths common in jigs, housings and medium-sized assemblies. The balanced combination of reach and rigidity makes it a versatile choice for routine inspection tasks, while the digital interface reduces transcription errors and speeds up measurement cycles. The result is a tool that enhances throughput without compromising on measurement reliability. Discuss delivery, calibration documentation and workflow compatibility with Metav Werkzeuge to secure this ISO 17025 calibrated Microtech Metrology internal precision gauge (SKU 139160711) for immediate integration into inspection processes Technical data Article number: 139160711 GTIN: 4061905045400 Manufacturer: Microtech Metrology Facts Measuring range: 70–160 mm Measuring depth: 1000 mm Accuracy: ±0.02 mm Reading (resolution): 0.0001 mm Display: Colour 1.54" touchscreen Special features Data output: Wireless, USB Digital instrument ISO 17025 calibration with certificate included FAQ What is the guaranteed accuracy of this instrument? The stated measurement accuracy is ±0.02 mm for the Microtech Metrology internal precision gauge, suitable for standard workshop quality control. Is an accredited calibration certificate supplied? Yes — the instrument is delivered with an ISO 17025 calibration certificate, confirming traceability and documented calibration status. How are measurement results exported from the device? Results can be transferred via the unit’s Wireless interface or by USB connection for direct import into inspection software or data-logging systems. What sizes can be measured with this instrument? The measuring range covers 70–160 mm, with a measuring depth of 1000 mm, making it appropriate for medium-sized internal bores and deeper access requirements. Does the display resolution match the instrument accuracy? The display provides a resolution of 0.0001 mm, which offers fine readback detail; however, the practical accuracy to rely on for decisions is ±0.02 mm, as stated in the specifications. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
70-160mm Internal Micrometer With Retractable Probe, Colour Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Benefit from ISO 17025 traceable calibration, Wireless + USB data export and a 0.0001 mm display resolution to secure reproducible internal measurements and efficient data capture. Order the internal fine measuring instrument directly via Metav Werkzeuge or ask our consultants if needed. Internal fine measuring instrument »Innen-Feinmessgerät« by Microtech Metrology — Wireless + USB, Colour 1.54" touchscreen The Internal fine measuring instrument is a digital precision gauge designed for internal measurements in machine shops and metrology labs, offering traceable calibration and networked data capture for routine quality control. Measurement range 70–160 mm Wireless + USB data output ISO 17025 calibrated with certificate Colour 1.54" touchscreen display Reliable accuracy and laboratory traceability The instrument is specified for a measurement range of 70–160 mm, which classifies it in the Standard category for workshop and metal‑working inspection tasks where reach and rigidity must be balanced. With a stated accuracy of ±0.03 mm and a high‑resolution readout of 0.0001 mm, the device provides the kind of repeatable results required for assembly inspection and incoming goods testing. The delivery includes a full calibration under ISO 17025, ensuring measurements are traceable and suitable for documented quality processes. Integrated data transfer for modern workflows Equipped with Wireless + USB outputs and a colour 1.54" touchscreen, the unit supports rapid digital logging and reduces manual transcription errors. The connectivity enables straightforward transfer to SPC systems, spreadsheet software or data collectors, speeding up non‑destructive sampling and statistical process control routines. The touchscreen simplifies setting adjustments and instant visual confirmation, which shortens cycle times in high‑throughput inspection environments. Designed for dependable workshop use and clear results Built as a digital fine measuring device for internal geometries, the tool combines a robust measuring mechanism with an easy‑to‑read colour display to minimise operator uncertainty. A listed measuring depth of 3000 expands applicability to deeper bores and assemblies where access is a constraint, while the digital electronics provide consistent readings across shifts. The emphasis on traceable calibration and digital output supports documented production protocols and helps maintain product conformity with less administrative overhead. For traceable internal measurement and seamless data capture, choose the Microtech Metrology solution and contact Metav Werkzeuge in Emmerich for ordering and technical guidance by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 139160733 GTIN: 4061905046339 Manufacturer: Microtech Metrology Facts Measurement range: 70–160 mm Resolution: 0.0001 mm Accuracy: ±0.03 mm Measuring depth: 3000 Special features Digital device Colour 1.54" touchscreen display Data output: Wireless + USB ISO 17025 calibration and certificate included FAQ Is the instrument delivered calibrated and documented? The internal fine measuring instrument is supplied fully calibrated under ISO 17025 and includes the calibration certificate with the delivery (Microtech Metrology, SKU 139160733). What measurement range and precision can be expected? The device covers 70–160 mm with a display resolution of 0.0001 mm and a stated accuracy of ±0.03 mm, suitable for standard workshop and laboratory inspections. How is measurement data exported for analysis? Data can be transferred via Wireless + USB to data collectors, PCs or SPC systems, enabling straightforward integration into existing quality workflows. For which applications is this instrument most suitable? The instrument is ideal for internal diameter checks, assembly inspection and metrology tasks in machine shops and production control where traceable digital results and networked data are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Fast, repeatable geometry checks in seconds
Caliper gauges (also referred to as precision calipers or quick-action gauges) are high-efficiency fine measuring instruments designed for precise geometry control in the production environment. Need to verify internal grooves, pipe wall thickness or small bores quickly? These tools deliver reliable results at sampling speed, making them ideal for series production, incoming goods inspection and workshop testing.
How they work and where they belong
The core of these devices is a spring-loaded lever system that applies a defined contact force, so measurements remain repeatable and independent of the operator’s feel. Caliper gauges capture hard-to-reach features — deep internal grooves, notches, freeform surfaces and thin walls — either mechanically or in digital form. Ergonomic one-handed operation allows the workpiece to stay in the machine or on the test table while checks are performed, reducing handling and downtime.
Practical advantages that improve throughput
- Consistent repeatability due to defined contact force, lowering measurement scatter.
- Rapid sampling: geometry checks are performed in the time of a few seconds, reducing cycle times.
- Flexible contact options such as ball, blade or disc contacts, matching different workpiece geometries.
- Choice of robust analog models or digital units with Go/NoGo tolerance indication and interfaces for direct integration into digital quality assurance.
- Ergonomic design that shortens set-up and inspection times, increasing shop-floor productivity.
Metav: a reliable precision partner for industry
Metav combines decades of metrology experience with a broad offering from Emmerich, acting as a quality filter for the European market. With more than 48,000 customers and over 250,000 products, Metav supplies a comprehensive selection of caliper gauges and accessories, helping purchasing managers reduce supplier complexity while securing reliable supply and technical competence.
Summary
Caliper gauges — precision calipers and quick-action gauges — provide fast, repeatable and operator-independent measurements for demanding industrial inspection tasks, delivering measurable gains in throughput and quality control.
FAQ
What makes caliper gauges suitable for deep internal measurements?
The spring-loaded lever system in caliper gauges ensures a defined contact force while specialised stylus geometries (ball, blade, disc) reach deep grooves and notches, enabling precise capture of internal features.
Can digital caliper gauges be integrated into existing quality systems?
Yes. Digital caliper gauges often include tolerance indication (Go/NoGo) and data interfaces, allowing direct connection to digital quality assurance systems for automated logging and analysis.
Which contact form should I choose for thin-walled parts?
For thin or delicate walls, disc or ball contacts minimise local deformation; Metav’s product range lists the available contact geometries so you can match the caliper gauge to the application.
How do caliper gauges maintain operator-independent repeatability?
Defined contact force from the spring-loaded lever system removes variability caused by hand pressure, so caliper gauges deliver consistent measurements across different operators and cycles.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com