Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
25mm End Mill for XNKU 06T3 Indexable Inserts With Internal Coolant, 4 Teeth - Teknik Makina
Optimise machining performance with the combination of a 25 mm shank, internal coolant and compatibility with XNKU 06T3 indexable inserts for reliable cycle times and extended tool life. Order directly via Metav Werkzeuge or consult our specialists for tailored tooling advice. 25 mm Shank Milling Cutter S780TM – Insert milling cutter with internal coolant by Teknik Makina The 25 mm Shank Milling Cutter S780TM is an indexable-insert milling cutter engineered for secure toolholding and efficient chip control in face and shoulder milling applications on CNC machines. 25 mm shank for stable toolholding Internal coolant for efficient cooling Compatible with XNKU 06T3 indexable inserts 60 mm cutting length with 4 cutting edges High-efficiency machining through indexable-insert design The combination of an indexable-insert system and central coolant supply allows a clear focus on machining efficiency and predictable tool life. Designed for XNKU 06T3 inserts, the cutter converts insert corner changes into quick interventions rather than lengthy regrinds, which reduces machine downtime and total tooling cost. The internal coolant channels coolant directly to the cutting zone, improving heat dissipation and aiding chip evacuation — a practical solution for longer uninterrupted cycles and consistent surface finish. Quick maintenance and proven compatibility for easy handling Maintenance routines are simplified by the standardised insert clamping and the use of a Torx drive. The cutter accepts the included Torx key specification T8 and secures inserts with an M2.5 x 5.5 screw, enabling fast, repeatable insert changes. Compatibility with Palbit-type inserts and the XNKU 06T3 geometry ensures broad availability of cutting grades and geometries for varied materials and batch sizes. The straightforward serviceability translates into lower handling times and predictable changeover procedures. Rigidity and stability for consistent results in demanding operations A 25 mm shank diameter combined with a total length of 110 mm yields a balance between reach and stiffness; the 60 mm cutting length with four cutting edges provides efficient metal removal while maintaining stability. At a weight of 0.344 kg the tool is light enough for dynamic spindle performance yet robust where rigidity matters. These characteristics reduce vibration, contribute to repeatable tolerances and help achieve superior surface quality in slotting, shoulder and face milling tasks on modern milling centres. For Teknik Makina quality backed by Metav Werkzeuge’s European distribution and tooling expertise, contact Metav Werkzeuge in Emmerich for individual advice, availability and order handling via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S780TM Product type: Insert milling cutter Suitable for: XNKU 06T3 indexable inserts Compatible insert manufacturer: Palbit Core specifications Shank diameter: 25 mm Overall length: 110 mm Cutting length: 60 mm Number of cutting edges: 4 Weight: 0.344 kg Torx key: T8 Screw: M2.5 x 5.5 Special features Internal coolant For XNKU 06T3 indexable inserts Manufacturer: Teknik Makina FAQ Which inserts fit this cutter? The cutter is specified for XNKU 06T3 indexable inserts; grades and geometries from Palbit are compatible and recommended for broad machining applications. Is the tool suitable for heavy roughing? With a 25 mm shank, four cutting edges and a 60 mm cutting length, the cutter provides the rigidity and edge count appropriate for heavy roughing when used with suitable inserts and machining parameters. How does internal coolant improve performance? Internal coolant delivers coolant directly to the cutting zone, which reduces cutting temperature, improves chip removal and helps extend the life of the indexable inserts used with this tool. What tooling is required for insert changes? Insert clamping uses a Torx drive; the specified key is T8 and the insert screw is M2.5 x 5.5, enabling fast and repeatable insert replacement. Can the cutter be used on automatic toolchangers? The cutter’s 25 mm shank and standard mounting dimensions are compatible with typical CNC toolholders and automatic toolchang ers; check machine toolholder specifications for full compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm End Mill For XOMX 0602-1204 Indexable Inserts, 3 Flutes 55mm Cutting Length, 90° - Teknik Makina
Conflicting product data: the field "bezeichnung_2_en" specifies compatibility with XOMX 0602–1204 indexable inserts, while the field "fur_wendeplatten" lists XOMX 0903; these entries are inconsistent and require verification. This discrepancy could lead to confusion for users attempting to determine the correct inserts for their tools. It is essential to cross-check these details with the manufacturer or supplier to ensure accurate information is provided. Miscommunication in technical specifications can result in improper usage, reduced efficiency, or even damage to equipment, making it critical to address such inconsistencies promptly and effectively. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selçuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm End Mill For XOMX 1204 Indexable Inserts, 3 Flutes 55mm Cutting Length, 90° Cutting Angle - Teknik Makina
Take advantage of the combination of sturdy 25 mm shank stability, compatibility with XOMX 0602–1204 indexable inserts, and a three‑edge cutting configuration for consistent metal removal and short set‑up times; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Shank cutter S643TM – indexable insert milling tool with 25 mm shank A shank cutter designed for indexable inserts, intended for milling operations using XOMX 0602–1204 plates and compatible with SECO insert systems. Compatible with XOMX 0602–1204 inserts Robust 25 mm shank for stable clamping Three cutting edges for steady chip removal Torx M3.5x8.5 clamping with T10 key Reliable rigidity and predictable cutting performance The tool is built around a 25 mm shank, offering high clamping security in modern toolholders and reduced run‑out during machining. With a three cutting edge arrangement and a 90° cutting angle, the design stabilises cutting forces and promotes even chip formation, which helps to maintain surface quality and extend insert life. The replaceable indexable inserts (XOMX 0602–1204) allow operators to restore cutting geometry quickly without regrinding, translating into measurable reductions in downtime and smoother production flow. Fast insert handling and secure fastening Clamping is achieved with a Torx M3.5x8.5 screw operated by a T10 key, enabling concise and repeatable insert changes. The tool’s total length 150 mm and cutting length 55 mm balance reach with stiffness; the overall mass (approx. 0.574 kg) contributes to steady cutting dynamics in standard milling set‑ups. The combination of simple screw access and standardised insert format supports quick maintenance cycles and predictable assembly procedures on the shop floor, making the cutter suitable for regular shift use where tool change speed matters. Application scope and insert‑led flexibility This shank cutter accepts XOMX 1204 size inserts and is listed as compatible with SECO plate formats; the actual cutting performance and material range are therefore determined by the chosen insert grade and geometry. Manufacturers can select carbide grades and coatings on the inserts to adapt the tool for finishing or more aggressive material removal. The tool’s indexable concept provides operational flexibility: a single holder covers multiple machining tasks simply by fitting the appropriate insert, which offers cost efficiency and simplified inventory management for workshops and production planners. Contact Metav Werkzeuge for availability and a tailored recommendation on Teknik Makina’s shank cutter S643TM; our specialists in Emmerich can advise on insert grades and clamping options to match each machining task. Technical data Article number: S643TM Manufacturer: Teknik Makina Product name: Schaftfräser (for XOMX 0602-1204 Indexable Inserts) Numeric data Shank diameter: 25 mm Tool diameter: 25 mm Cutting length (shank): 55 mm Total length: 150 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.574 kg Design features Torx screw: M3,5x8,5 Torx key size: T10 Compatible insert family: XOMX 1204 Compatible insert manufacturer: SECO FAQ Which insert sizes fit this shank cutter? The shank cutter S643TM is designed for XOMX 0602–1204 indexable inserts; XOMX 1204 plates are specified for direct fit. How is the insert secured in the cutter? Inserts are clamped with a Torx screw M3,5x8,5 tightened using a T10 key, providing repeatable and secure retention for Teknik Makina’s shank cutter S643TM. What are the key dimensions to check for toolholder compatibility? Important dimensions include the 25 mm shank diameter and the 150 mm total length; these determine holder fit and reach for the indexable shank cutter. Can the same cutter be used for different machining tasks? Yes. The cutter accepts changeable indexable inserts, so selecting appropriate insert grades and geometries adapts the tool for a variety of operations and material conditions. Is tool balance or mass provided for high‑speed milling? The data lists a weight of approximately 0.574 kg and standard dimensions; specific balance ratings are defined by the holder and spindle configuration, and insert choice will influence high‑speed suitability for Teknik Makina’s shank cutter S643TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Face Cutter For APKT 1604 Indexable Inserts, 2 Cutting Edges, 65mm Cutting Length - Teknik Makina
Take advantage of a robust, industry‑grade holder that combines compatibility with APKT 1604 indexable inserts and a rigid 25 mm shank to improve process stability and reduce tool change frequency. Order the tool via Metav Werkzeuge or consult the team for technical alignment with existing toolholders and insert grades. Shank milling cutter – for APKT 1604 indexable inserts, Ø25 mm shank (Teknik Makina, S276TM) The shank milling cutter S276TM is a purpose‑built cutter body for medium‑duty milling operations, engineered to accept APKT 1604 indexable inserts and to deliver predictable performance in serial production and jobbing environments. Indexable for APKT 1604 inserts 25 mm shank diameter for rigid clamping 65 mm effective cutting length Torx M4x10 fastening, T15 key Improved process reliability through stable clamping and geometry The tool body is designed around a 25 mm shank, which delivers increased stiffness and reduced deflection during interrupted cuts. This rigidity translates into better surface finish and more consistent tolerances when machining shoulders or face surfaces. With a cutting angle of 90° and two cutting edges, the geometry supports straightforward, repeatable machining strategies; fewer vibrations and stable engagement reduce the likelihood of premature insert wear, which in turn lowers overall machining cost per component. Faster tool changes and predictable setup for production environments Retention is secured with an M4x10 Torx screw and a T15 key, enabling quick insert replacement and reliable clamping torque without special fixtures. The 65 mm cutting length provides sufficient reach for many operations while keeping tool overhang low, thereby supporting higher metal removal rates under controlled cutting parameters. The standardised fastening and insert interface shortens downtimes and simplifies inventory management when using APKT 1604 inserts from suppliers such as Korloy. Compatibility, maintenance and selection guidance Compatibility with APKT 1604 indexable inserts makes the holder suitable for a broad range of materials and grades; selecting the correct insert grade allows optimisation for steel, stainless steel or cast materials depending on the insert specification. The modular concept avoids the need for special bodies for each application and supports simple maintenance procedures: periodic torque checks on the Torx screw and visual inspection of the pocket and seating face are sufficient to maintain safe, repeatable clamping. For assemblies where runout must be minimised, the robust shank diameter helps preserve concentricity between spindle and cutting edge. Why this cutter fits a workshop or production cell Engineered as a pragmatic solution, the holder delivers a balance of rigidity, ease of service and compatibility that benefits both single‑machine shops and larger production cells. The compact design and standardised insert interface reduce tooling complexity and enable quick adaptation to common milling tasks. In practical terms, adoption of this cutter body can lower tool change time, support predictable cycle times and contribute to a more efficient production flow when paired with appropriate insert grades and cutting data. For technical advice tailored to the application or to request S276TM components and accessories, contact Metav Werkzeuge for guidance and ordering assistance Technical data Article number: S276TM Manufacturer: Teknik Makina Diameter: 25 mm Shank diameter: 25 mm Cutting length: 65 mm Overall length: 200 mm Cutting edges: 2 Weight: 0.75 kg Cutting angle: 90° Compatible with APKT 1604 indexable inserts Insert manufacturer compatibility: Korloy Torx screw: M4x10 Torx key size: T15 Suitable for indexable insert machining FAQ What insert type fits this cutter? The cutter accepts APKT 1604 indexable inserts; it is specified for that insert geometry and mates with Korloy and other compatible APKT 1604 grades. Which shank diameter and overall length does the tool offer? The holder features a 25 mm shank with an overall length of 200 mm and an effective cutting length of 65 mm. How is the insert secured in the pocket? The insert is clamped with an M4x10 Torx screw; a T15 key is used for installation and torqueing. Is the tool suitable for heavy interruption or roughing cuts? The 25 mm shank provides enhanced rigidity for moderate interruption; selection of the appropriate insert grade and cutting parameters is recommended for demanding roughing operations. What is the SKU and who manufactures the tool? The product is listed as S276TM and is manufactured by Teknik Makina as a shank milling cutter for APKT 1604 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Face Mill For APKT 0903 Indexable Inserts 3 Cutting Edges, 90° Cutting Angle - Teknik Makina
Take advantage of a compact, rigid cutter body that combines stable clamping, long cutting length and simple insert replacement for uninterrupted machining. The combination of a 25 mm shank and a 60 mm effective cutting length supports consistent material removal and predictable process stability. Order directly via Metav Werkzeuge or ask the consultants for application advice. Indexable shank milling cutter S220TM — Ø25 mm, for APKT 0903 indexable inserts (Teknik Makina) The Indexable shank milling cutter S220TM is a purpose‑built indexable cutter body for heavy‑duty side and face milling, designed to accept APKT 0903 indexable inserts for fast insert changes and reliable performance Indexable shank milling cutter for APKT 0903 inserts 25 mm shank diameter for stable clamping 60 mm effective cutting length 3 cutting edges for high material removal rates Torx screw M2.5x7 with T8 key for secure insert fixing Greater rigidity for consistent cycle times A larger shank diameter delivers measurable gains in stiffness; the 25 mm shank reduces deflection under load and maintains cutting geometry when machining demanding features. With a 90° cutting angle and a 60 mm cutting length, the tool body provides a stable platform for shoulder milling and full‑width cuts. The resulting benefit is a more predictable machining process with fewer corrective passes and improved first‑pass accuracy, which supports higher throughput and lower scrap rates. Faster serviceability reduces downtime Compatibility with APKT 0903 indexable inserts and a secure Torx M2.5x7 clamping arrangement simplifies insert replacement and repeatable seating. Insert changes are fast and reproducible using a T8 key, lowering mean time to repair and keeping the machine running. The three‑edge cutter geometry balances cutting performance and insert life, enabling longer cycles between maintenance stops while maintaining chip control and surface finish expectations. Practical fit for industry workflows This cutter body is configured for straightforward integration into established tool sets: the overall length of 200 mm and the defined 60 mm effective cutting length suit common setups on compact and medium‑sized milling spindles. The component is supplied ready for standard APKT 0903 inserts produced by major manufacturers, supporting quick tool replacement strategies and consistent process documentation across machining cells. The comparatively low mass of 0.765 kg also aids spindle balance and reduces unnecessary axial load during operations. Reliability and handling in the workshop Designed as an industrial component rather than a consumable, the shank cutter offers secure insert retention and repeatable assembly to help maintain machining quality shift after shift. Compatibility data indicates suitability for insert grades and geometries used in many production environments, enabling tool standardisation across workstations and simplifying stock management. The deliberate mechanical design focuses on minimising vibration and delivering consistent chip evacuation at moderate to high material removal rates. For precise advice on integrating the S220TM into a specific machining setup or to source compatible APKT 0903 inserts, contact Metav Werkzeuge for tailored consultancy and order support. Technical data Article number: S220TM Manufacturer: Teknik Makina Shank diameter: 25 mm Effective cutting length: 60 mm Overall length: 200 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.765 kg Compatible inserts: APKT 0903 Insert screw: M2.5x7 (Torx) Torx key: T8 Compatible insert manufacturer: Walter Special features Indexable shank milling cutter design Rapid insert replacement capability Secure Torx clamping system Three‑edge cutter geometry for balanced performance Compact mass for reduced spindle load FAQ Which inserts fit this cutter body? The cutter accepts APKT 0903 indexable inserts; the S220TM is prepared for standard APKT 0903 geometries as used by major insert manufacturers. What key and screw are required to fix the inserts? Inserts are secured with an M2.5x7 Torx screw, tightened with a T8 key for consistent seating on the S220TM. Is this cutter compatible with Walter inserts? Yes, the body is specified as compatible with inserts from Walter and other manufacturers that adhere to the APKT 0903 specification. What applications suit this cutter body? The tool is intended for side and face milling operations where a 25 mm shank and a 60 mm cutting length deliver the required rigidity and reach, supporting standard production workflows. How does the cutter support process stability? The larger shank diameter and three‑edge geometry reduce deflection and vibration, improving repeatability and surface finish across repeated passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Indexable Head Cutter For APXT 1003 Indexable Inserts 3 Flutes 60mm Cutting Length, 90° - Teknik Makina
Benefit from robust, vibration‑reduced machining thanks to the 25 mm shank and 60 mm cutting length, combined with secure insert retention via the supplied Torx screw; order this shaft milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shaft milling cutter S188TM — 25 mm shank, for APXT 1003 indexable inserts (Teknik Makina) A reliable Shaft milling cutter S188TM engineered for secure clamping of APXT 1003 indexable inserts and consistent face milling performance in industrial workshops 25 mm shank diameter for rigid clamping 60 mm cutting length for deep cuts Compatible with APXT 1003 indexable inserts Torx screw M2.5x5.5 (T8) for secure insert fixation Precision and stability for higher throughput The combination of a 25 mm shank and a 60 mm cutting length provides a stiff geometry that reduces chatter during heavy cuts, improving surface finish and dimensional consistency. With a 90° cutting angle and three cutting edges, the tool is designed to distribute cutting forces evenly, which enables higher feed rates while maintaining tool life. For shops seeking measurable productivity gains, this cutter translates rigidity into predictable cycle times and fewer reworks. Quick indexable workflow to cut downtime Designed for APXT 1003 indexable inserts and compatible with Korloy variants, the tool supports rapid insert changes and predictable cutting behaviour. The included Torx screw M2.5x5.5 and T8 key ensure firm and repeatable clamping of each insert, reducing setup time and the risk of loosening during operation. By standardising on indexable inserts, maintenance becomes straightforward and inventory management is simplified, delivering a clear operational advantage on the shop floor. Built for workshop reliability and straightforward integration With an overall length of 200 mm, a nominal 25 mm diameter, and a mass of 0.771 kg, the cutter balances reach and handling for a range of milling stations. The robust mechanical design supports consistent performance in batch production and repair work alike. Clear specification of dimensions and fastening method allows simple integration into existing toolholders and fixtures, so the milling operation can be optimised without lengthy trials. Contact Metav Werkzeuge for availability and tailored technical advice regarding the S188TM shaft milling cutter and its suitability for production environments; Metav Werkzeuge provides local supply from Emmerich and expert consulting to ensure the right tool choice Technical data Article number: S188TM Brand: Teknik Makina Product: Shaft milling cutter for indexable inserts Diameter: 25 mm Shank diameter: 25 mm Cutting length: 60 mm Overall length: 200 mm Weight: 0.771 kg Number of cutting edges: 3 Cutting angle: 90° Compatibility & features For APXT 1003 indexable inserts Compatible with Korloy inserts Torx screw M2.5x5.5 Torx key size: T8 SKU: S188TM Manufacturer: Teknik Makina FAQ Is this cutter compatible with APXT 1003 inserts from other manufacturers? The shaft milling cutter S188TM is specified for APXT 1003 indexable inserts and is compatible with Korloy inserts; compatibility with other brands should be confirmed against their insert dimensions. What fixing hardware is supplied for the inserts? The tool uses a Torx screw M2.5x5.5 for insert retention and requires a T8 Torx key for tightening and loosening. What machining tasks suit this cutter best? The cutter is intended for face milling and general milling operations where a rigid 25 mm shank and a 60 mm cutting length provide the required stiffness and reach. How many cutting edges does the tool have and what is the cutting geometry? The cutter offers three cutting edges with a 90° cutting angle, optimised for even force distribution and stable material removal. What are the key dimensions to check before ordering? Verify the 25 mm diameter, 60 mm cutting length, and 200 mm overall length to ensure compatibility with the holder and the intended machining task. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Milling Cutter For AP-- 1604 Indexable Inserts With Through Coolant, 55mm Cut Length - Teknik Makina
Take advantage of robust rigidity, internal coolant and quick‑change indexable inserts for steady, high‑feed machining; order the cutter directly via Metav Werkzeuge or ask our consultants if additional technical details are required. End mill S266-1TM — indexable insert milling cutter with 25 mm shank and internal coolant (Teknik Makina) The End mill S266-1TM is an indexable‑insert milling cutter designed for AP-- 1604 inserts, combining a 25 mm shank with internal coolant to support stable face and slot milling in production and job‑shop environments. 25 mm shank for rigid toolholding Internal coolant for improved chip evacuation Compatible with AP-- 1604 inserts (Korloy) Total length 150 mm, 55 mm cutting length Stable clamping and consistent cutting performance The tool’s 25 mm shank and compact overall geometry provide enhanced rigidity, reducing runout and improving surface finish under moderate-to-high milling loads. Reduced vibration translates into more reliable dimensional adherence and predictable tool life, which benefits batch production and repeated setups. The solid mechanical design supports secure engagement in standard toolholders and helps maintain concentricity at higher feed rates. Coolant-through design improves chip control and tool life Built with internal coolant, the cutter channels coolant directly to the cutting zone to evacuate chips and dissipate heat. This targeted cooling lowers cutting temperature and reduces built-up edge on the insert, allowing for more consistent cutting conditions and extended insert intervals. In practice, coolant-through tools help maintain process stability when tackling longer tool overhangs or interrupted cuts. Quick, cost-effective inserts and compatibility Accepting AP-- 1604 indexable inserts from Korloy, the cutter benefits from the economic and logistical advantages of indexable tooling: rapid insert changes, repeatable geometry, and lower per‑edge cost compared with solid‑carbide alternatives. The use of standard inserts simplifies inventory management and reduces downtime during replacement, supporting a leaner workshop supply chain. Secure clamping hardware for repeatable setup Insert retention is achieved with a T15 Torx drive and M4x10 clamping screw, giving a repeatable and robust fastening method. The cutter features two cutting edges to balance material removal and tool life for typical finishing and semi‑finishing passes. Clear attention to the clamping interface reduces insert micro‑movement and supports consistent machining tolerances part after part. Workshop integration and process benefits With an overall length of 150 mm and a dedicated cutting length of 55 mm, the tool integrates easily into common milling workflows while offering the reach required for many slotting and shoulder operations. The combination of coolant-through capability and indexable inserts means fewer complete tool replacements and faster cycle recovery, which is particularly valuable for mixed production runs and maintenance‑sensitive operations. Practical advantages for procurement and production planning Specifying this indexable insert milling cutter simplifies ordering and stocking: one shank tool plus compatible AP-- 1604 inserts covers a range of applications. The tool’s construction supports predictable maintenance intervals and straightforward on‑bench insert servicing, helping to reduce unexpected downtime and maintain throughput in small and mid‑sized workshops. For robust, coolant-fed milling from Teknik Makina, contact Metav Werkzeuge for procurement and technical advice — call +49 2822 7131930 or email info@metav-werkzeuge.com. Technical data SKU: S266-1TM Manufacturer: Teknik Makina Product: End mill for indexable inserts AP-- 1604 Internal coolant: Yes Dimensions & weights Shank diameter: 25 mm Overall length: 150 mm Cutting length: 55 mm Number of cutting edges: 2 Weight: 0.544 kg Fastening & compatibility Compatible inserts: AP-- 1604 Compatible insert manufacturer: Korloy Torx key: T15 Clamping screw: M4x10 FAQ What inserts does this cutter use? The S266-1TM is designed for AP-- 1604 indexable inserts and is compatible with inserts from Korloy, enabling rapid edge changes and standardised stock management. Does the tool provide coolant through the body? Yes, the cutter features internal coolant to direct fluid to the cutting zone for improved chip evacuation and temperature control. Which shank size and lengths are specified? The tool has a 25 mm shank, an overall length of 150 mm and a cutting length of 55 mm, offering a balanced reach for many milling tasks. What fastening hardware is used for the inserts? Insert retention uses a Torx T15 drive with an M4x10 clamping screw to ensure secure and repeatable fixation of the AP-- 1604 inserts. How many cutting edges does the tool have and what is the benefit? The cutter has two cutting edges, a configuration that balances material removal rate with tool life and is suitable for many finishing and semi‑finishing applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Milling Cutter for APKT 0903 and AXMT 0602 Indexable Inserts, 3 Flutes 60mm Cut Length, 150mm Overall - Teknik Makina
Take advantage of a rigid tool body and quick insert changes to keep cycle times low and surface finish high; the combination of a 25 mm shank and a 60 mm cutting length delivers stability for longer passes while the Torx clamping system reduces downtime. Order the cutter directly via Metav Werkzeuge or contact our consultants for technical clarification. Shank Milling Cutter S024TM — 25 mm diameter, 3-flute tool for AXMT 0602 & APKT 0903 inserts by Teknik Makina A compact, indexable-insert shank milling cutter, Shank Milling Cutter S024TM, engineered for insert-based milling with AXMT 0602 and APKT 0903 systems and intended for CNC and shop-floor use 25 mm shank diameter 3 cutting edges for smooth operation 60 mm cutting length Torx fastening M2.5×5.5, T8 key Higher throughput with stable toolholding The S024TM is designed to convert insert flexibility into process efficiency. The use of indexable inserts such as AXMT 0602 and APKT 0903 allows economical edge changes without regrinding, while the solid 25 mm shank increases tool rigidity for longer unsupported lengths. This combination reduces chatter and supports higher material removal rates, so production runs remain consistent and predictable. The tool body geometry and three-flute layout favour a balance between cutting speed and surface finish. Reliable insert clamping for minimal downtime Fast, repeatable clamping is a practical advantage on busy production lines. The cutter secures inserts using a Torx screw M2.5×5.5 tightened with a T8 key, enabling quick replacement and uniform clamping torque across inserts. Consistent clamping reduces the risk of seating errors and uneven wear, translating into fewer interruptions for rework and a steadier output quality over multiple tool changes. Rigidity and handling that suit series production With an overall length of 150 mm and a cutting length of 60 mm, this milling cutter is configured to offer a good compromise between reach and stiffness. The three-flute configuration provides efficient chip evacuation while maintaining a clean surface; combined with the tool’s mass (approx. 0.583 kg) and 25 mm diameter, the cutter performs reliably in end-use setups where axis stability and repeatability matter. These attributes are particularly useful for short-to-medium length passes in standard toolholders. Practical integration and compatibility The cutter matches common insert families and is supplied for use with inserts from established manufacturers such as Taegutec, simplifying procurement and tool planning. The modular nature of indexable-insert systems means blades can be chosen to suit specific materials and finishes without replacing the entire cutter body, supporting lean stocking and rapid adaptation to changing production needs. Choose the Teknik Cutting Tools S024TM for a stable, insert-based milling solution and contact Metav Werkzeuge GmbH in Emmerich for availability or detailed specification support: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: S024TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.583 kg Diameter: 25 mm Special features For AXMT 0602 and APKT 0903 indexable inserts Compatible with Taegutec inserts Torx fastening M2.5×5.5 Torx key size T8 FAQ Which insert types fit this cutter? The cutter accepts AXMT 0602 and APKT 0903 indexable inserts; it is compatible with inserts from Taegutec as indicated for the S024TM shank milling cutter. What is the shank diameter and why does it matter? The shank diameter is 25 mm; a larger shank diameter increases rigidity and reduces vibration, improving stability during milling passes. How many cutting edges does the tool have? This milling cutter has three cutting edges (3 flutes), which balance chip evacuation and surface finish for general milling tasks. What are the tool’s dimensions for setup planning? The cutter’s overall length is 150 mm with a cutting length of 60 mm; use these values when planning holder selection and tool offsets for CNC programmes. Which screw and key are required to change inserts? Insert clamping uses a Torx screw specified as M2.5×5.5 and requires a T8 Torx key for secure and repeatable fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Milling Cutter For APKT 0903 Indexable Inserts, 3 Flutes 45mm Cutting Length, 90° - Teknik Makina
Take advantage of the combination of reliable indexable-insert compatibility, a compact 25 mm shank and a 45 mm effective cutting length to increase throughput and part consistency; order the S214TM directly via Metav Werkzeuge or consult the technical team for application advice. S214TM — 25 mm shank milling cutter for APKT 0903 indexable inserts (Teknik Makina) S214TM is a shank-mounted indexable milling cutter engineered for robust shoulder and slot milling with APKT 0903 indexable inserts in general workshop and light industrial applications Compatible with APKT 0903 indexable inserts 25 mm shank diameter for secure clamping 45 mm effective cutting length for deeper passes 90° cutting angle for consistent shoulder milling Consistent productivity through proven insert compatibility The tool holder is designed for reliable use with APKT 0903 indexable inserts, which ensures repeatable cutting performance and simplified inventory management. By accepting a widely used insert format, the cutter reduces setup variability and shortens tool-change intervals. The combination of insert standardisation and the holder’s clamping arrangement results in predictable tool life, which suits production runs where consistent cycle times are required. Secure clamping and stiffness for stable machining A 25 mm shank and a substantial overall length of 150 mm provide the required rigidity for stable milling operations. Stiffness in the shank reduces vibration, which leads to improved surface finish and extended insert life when compared with less rigid holders. The tool’s mass, at 0.59 kg, contributes to damping of chatter without compromising handling in the tool magazine or manual changeover situations. Geometry tailored for shoulder and face milling With a 90° cutting angle and three cutting edges, the cutter is optimised for shoulder milling and light face milling where square shoulders and dimensional accuracy are important. The 45 mm effective cutting length allows for deeper engagement while maintaining chip evacuation efficiency when paired with the correct insert grade and cutting parameters. This geometry makes the tool suitable for short to medium-run production tasks where accuracy and fast cycle times are prioritised. Serviceable fastening and workshop integration Fastening uses a Torx M2.5x7 screw tightened with a T8 key, enabling quick insert clamping and secure retention during operation. The simplicity of the screw and key combination means insert changes and routine checks can be completed rapidly, reducing non-productive time. The holder is compatible with inserts from established manufacturers such as Walter, easing replacement sourcing and ensuring interchangeability across existing toolsets. Contact Metav Werkzeuge for detailed availability and application support for the Teknik Cutting Tools S214TM; eMail info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert guidance from Emmerich Technical data Article number: S214TM SKU: S214TM Facts Shank diameter: 25 mm Effective cutting length: 45 mm Total length: 150 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.59 kg Special features For APKT 0903 indexable inserts Torx screw: M2.5x7 Torx key size: T8 Suitable for inserts by Walter FAQ What insert type does the cutter accept? The S214TM accepts APKT 0903 indexable inserts and is designed to secure them reliably for shoulder and face milling operations. Is the shank compatible with standard toolholders and collets? A 25 mm shank provides compatibility with collets and shrink-fit or hydraulic chucks specified for that diameter; appropriate clamping is recommended for optimal stiffness. How long is the effective cutting length and what does that enable? The effective cutting length is 45 mm, which enables deeper single-pass engagement for shoulder milling while maintaining chip control when matched with a suitable insert grade. Which fastening hardware is used for the inserts? Inserts are retained with a Torx M2.5x7 screw using a T8 key, simplifying insert changes and ensuring secure clamping during operation. Can existing APKT 0903 inserts from major brands be used? Yes, the holder is compatible with standard APKT 0903 inserts from established manufacturers, streamlining procurement and interchangeability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Milling Cutter For RDMT 12T3 Indexable Inserts 2 Flutes 50mm Cutting Length, 120mm Overall - Teknik Makina
Take advantage of the combination of robust clamping, quick insert changes and a compact overall length to keep machining cycles predictable and efficient. Order the cutter directly via Metav Werkzeuge or contact their consultants for application advice. Insert milling cutter R228TM – 25 mm shank, for RDMT 12T3 indexable inserts | Teknik Makina Insert milling cutter R228TM designed for insert-based finishing and medium-duty milling in workshop and production environments with fast insert changes and secure fastening 25 mm shank diameter for stable clamping 50 mm effective cutting length Compatible with RDMT 12T3 indexable inserts Torx fastening M3.5x8.5 with T15 key Consistent machining through rigid design The milling body’s 25 mm shank delivers a firm connection to standard toolholders, which reduces vibration and improves repeatability in serial production. Fitted for RDMT 12T3 indexable inserts, this system permits rapid blade replacement so that cutting geometry is restored without grinding — a practical advantage when maintaining surface quality and dimensional tolerances. The two cutting edges and compact form contribute to predictable tool behaviour, supporting higher process stability across repeated cycles. Quick set-up and secure clamping to reduce downtime Fast insert changes and secure fastening are central to productivity. The cutter uses a Torx M3.5x8.5 screw and requires a T15 key, enabling quick, reliable tightening and straightforward maintenance. With an overall length of 120 mm and a weight of 0.422 kg, the tool balances accessibility and handling for changeovers while minimising the time lost to adjustment. Tools that simplify routine maintenance reduce non-productive time and make shift planning more efficient. Versatile cutting length for everyday workshop tasks An effective cutting length of 50 mm combined with a 25 mm diameter provides a balance between reach and rigidity, making the tool suitable for many common milling operations where insert-based solutions are preferred. The insert concept allows easy geometry changes and cost-effective reconditioning: worn inserts are replaced rather than the entire cutter, delivering an economic advantage for regular use in maintenance, prototyping and small-series production. Supply reliability and technical support from a precision partner Manufactured by Teknik Makina, the tool arrives ready for assembly and immediate use in compatible toolholders. Stocked by Metav Werkzeuge, the item benefits from a dependable European supply chain and Metav’s decades of experience in precision tools. Technical information and planning support are available to clarify suitability for specific fixtures or processes; for complex operations, Metav’s consultants can assist with selection and compatibility checks. Secure the Teknik Cutting Tools insert milling cutter R228TM with 25 mm shank from Metav Werkzeuge for expedited delivery and technical consultancy via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: R228TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Shank diameter: 25 mm Effective cutting length: 50 mm Overall length: 120 mm Weight: 0.422 kg Number of cutting edges: 2 Diameter: 25 mm Special features For RDMT 12T3 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 FAQ Which inserts are compatible with this cutter? The cutter accepts RDMT 12T3 indexable inserts; the R228TM is designed to secure these inserts for quick replacement and repeatable cutting geometry. How is the insert secured and changed? Inserts are fastened with a Torx M3.5x8.5 screw; use a T15 key to tighten or release the screw when changing inserts on the R228TM. What are the key dimensions to check for toolholder compatibility? Important dimensions include a 25 mm shank diameter and a 120 mm overall length; the 50 mm cutting length indicates the effective engagement depth. How many cutting edges does the tool provide? The cutter features 2 cutting edges, enabling efficient material removal while keeping insert costs manageable. Is this tool suitable for series production? The insert concept and rigid 25 mm shank make the tool well suited to repetitive milling tasks where rapid insert changes and consistent results are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Milling Cutter for XNKT 0604 Indexable Inserts 3 Flutes, 90° Cutting Angle, 40mm Cutting Length - Teknik Makina
Take advantage of the cutter’s combination of reliable insert compatibility, a rigid 25 mm shank and a 90° cutting angle for consistent, repeatable milling results; order the tool directly via Metav Werkzeuge or consult the technical team if further specification is required Shaft milling cutter S838TM — shank-mounted cutter for XNKT 0604 indexable inserts (Teknik Makina) The Shaft milling cutter S838TM is a shank-mounted milling body designed for indexable-insert operations with XNKT 0604 inserts, offering a compact 25 mm shank for stable clamping and quick insert changes Compatible with XNKT 0604 indexable inserts 25 mm shank for high clamping rigidity Three cutting edges for balanced cutting M3x7 Torx screw with T8 key for secure fixing Stable clamping and predictable machining quality The robust 25 mm shank and the compact overall geometry are designed to reduce deflection and vibration during rotation, which results in more consistent surface finishes and repeatable cycle times. With an overall length of 150 mm and a focussed cutting length of 40 mm, the tool body provides an optimised span between holder and cutting zone. The consequence is a greater degree of dimensional stability in the machined component, while the moderate weight of 0.572 kg contributes to a well‑balanced spindle load during high‑speed rotation. Fast indexable-insert handling and secure fixing Insert changes are simplified by the proven fastening system: a M3x7 Torx screw, tightened with a T8 key, secures each insert reliably and permits quick service routines. The cutter accepts XNKT 0604 inserts and is compatible with inserts from Korloy, enabling use of widely available grades and geometries. This standardised interface supports rapid tooling exchanges and predictable downtime, making the body suitable for production environments where tool change speed and process repeatability are valued. Geometry that supports efficient chip control and stability With a 90° cutting angle and three cutting edges, the milling body encourages even chipload distribution and balanced cutting forces, which helps to maintain steady feeds and reduces the risk of eccentric wear. The arrangement of the cutting edges promotes controlled chip evacuation and contributes to tool life predictability. For operations where insert indexing and rapid replacement are routine, this design supports a reliable balance between productivity and maintenance simplicity. For enquiries about specifications, insert compatibility or availability of the Teknik Makina S838TM with 25 mm shank, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert guidance and order processing Technical data SKU: S838TM Manufacturer: Teknik Makina Article name: Shaft milling cutter for XNKT 0604 indexable inserts Brand: Teknik Makina EClass: 21180806 ETIM: EC011860 Core dimensions Shank diameter: 25 mm Cutting length: 40 mm Overall length: 150 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.572 kg Features & compatibility Compatible inserts: XNKT 0604 Suitable insert supplier: Korloy Fixing screw: M3x7 Torx Torx key size: T8 SKU identifier: S838TM FAQ Which indexable inserts fit this cutter? The shaft milling cutter accepts XNKT 0604 inserts and is compatible with Korloy XNKT 0604 grades in the specified insert format. What is the shank diameter and why does it matter? The 25 mm shank provides increased clamping rigidity, which improves stability and reduces deflection during milling with the S838TM tool body. How are the inserts secured in the cutter body? Inserts are secured using a M3x7 Torx screw, tightened with a T8 key, allowing secure fixation and straightforward replacement of the indexable inserts. What overall and cutting lengths are provided? The tool has an overall length of 150 mm and a cutting length of 40 mm, balancing reach with rigidity for standard milling setups. How many cutting edges does the tool have and what is the cutting angle? The body is configured with three cutting edges and a 90° cutting angle, promoting balanced cutting forces and controlled chip formation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Schaftfräser für WNMX 09T3 Wendeplatten Innenkühlung, Schaftlänge 150mm - Teknik Makina
Schaftfräser von Teknik Makina für WNMX 09T3 Wendeplatten Der Schaftfräser ist ein robustes Zerspanungswerkzeug mit Innenkühlung, ausgelegt für Indexplatten des Typs WNMX 09T3 und präzise Bearbeitung in anspruchsvollen Fertigungsprozessen Innenkühlung für konstante Kühlung und längere Standzeit Kompatibel mit WNMX 09T3 Wendeplatten von Korloy Schaftdurchmesser 25 mm für stabile Werkzeugaufnahme Schnittlänge 60 mm für tiefe Eingriffe 2 Schneiden für ruhigen Lauf und hohe Oberflächengüte Die Kombination aus Wirtschaftlichkeit und Präzision macht den Schaftfräser zu einer zuverlässigen Wahl für Zerspanungsbetriebe; geeignet für WNMX 09T3 Wendeplatten von Korloy, unterstützt durch die integrierte Innenkühlung für verlängerte Standzeiten. Langlebigkeit durch Innenkühlung und durchdachte Konstruktion Die integrierte Innenkühlung führt das Kühlschmiermittel direkt zur Schnittzone und reduziert so thermische Belastungen an Schneidkante und Wendeplatte. Dadurch verbessert sich die Standzeit der Schneidplatten merklich und Stillstandzeiten wegen Werkzeugwechsel werden reduziert. Für Anwender, die auf konstante Prozessbedingungen Wert legen, sorgt diese Eigenschaft für planbare Produktionszyklen und geringere Werkzeugkosten. Präzise Schnittführung und ruhiger Lauf für bessere Oberflächen Mit 2 Schneiden und einer Schnittlänge von 60 mm liefert das Werkzeug gleichmäßige Spanbildung und reduzierte Vibrationen; das Ergebnis sind bessere Oberflächen und reproduzierbare Bauteilmaße. Der Schaftdurchmesser 25 mm gewährleistet eine stabile Spannaufnahme in gängigen Aufnahmevorrichtungen, wodurch die Prozesssicherheit bei hohen Schnittkräften steigt. Breites Einsatzspektrum und klare Kompatibilität Das Werkzeug ist speziell für Indexplatten des Formats WNMX 09T3 ausgelegt und passt zu Wendeplatten von Korloy, was den Einbau vorhandener Schneidplatten in bestehende Werkzeugkonzepte erleichtert. Für Anwender, die zwischen verschiedenen Plattenherstellern wählen, bietet diese Kompatibilität Planungssicherheit und Flexibilität beim Beschaffungsmanagement. Zur Erklärung: Wendeplatten sind austauschbare Schneidgeometrien, die eine wirtschaftliche Prozessführung ermöglichen. Montagehinweise, Schrauben und Handhabung Die Befestigung erfolgt mit einer Torx Schraube in der Größe M3x7, die mit einem Torx Schlüssel T8 angezogen wird; diese Kombination gewährleistet sicheren Sitz der Wendeplatte und einfache Wartung. Beim Wechseln der Platte empfiehlt sich kontrolliertes Anzugsmoment und Überprüfung der Sitzfläche, um Rundlauffehler zu vermeiden und die Lebensdauer von Platte und Werkzeug zu maximieren. Empfehlung: Den Schaftfräser von Teknik Makina über Metav Werkzeuge beziehen und bei Fragen die Fachberatung per eMail info@metav-werkezeuge.com oder telefonisch unter +49 2822 7131930 nutzen Produktmerkmale Artikelnummer: S802-1TM Marke: Teknik Makina Bezeichnung: Schaftfräser für WNMX 09T3 Wendeplatten Produktart: Schaftfräser Fakten Durchmesser: 25 mm Gesamtlänge: 150 mm Schaftdurchmesser: 25 mm Schaftlänge Schneide: 60 mm Schneiden: 2 Gewicht: 0.563 kg Besonderheiten Innenkühlung: ja (gezielte Kühlmittelzufuhr zur Schnittzone) Passend für Wendeplatten: WNMX 09T3 (Indexplatte Typ) Passend für Wendeplattenhersteller: Korloy Torx Schlüssel: T8 (Torx Schlüssel Größe) Torx Schraube: M3x7 (Schraubenabmessung) FAQ Für welche Wendeplatten ist der Schaftfräser geeignet? Der Schaftfräser ist ausgelegt für WNMX 09T3 Wendeplatten; die Konstruktion passt insbesondere zu Platten von Korloy, was eine einfache Integration in vorhandene Werkzeugkonzepte ermöglicht. Ist die Innenkühlung für Nassbetrieb geeignet? Ja, die integrierte Innenkühlung leitet Kühlschmierstoff direkt zur Schnittzone und unterstützt Nass- und mikroemulsionsbasierte Kühlkonzepte, um Hitzeentwicklung effektiv zu reduzieren. Welche Schraube und welcher Schlüssel werden für den Plattenwechsel benötigt? Verwendet wird eine Torx Schraube M3x7, die mit einem Torx Schlüssel T8 sicher angezogen wird; diese Kombination sorgt für sicheren Plattensitz und einfachen Service. Welche Vorteile bieten die 2 Schneiden? Die 2 Schneiden reduzieren Vibrationen und verbessern die Oberflächengüte bei kontinuierlicher Spanabfuhr, was besonders bei Serienfertigung zu gleichmäßigeren Ergebnissen führt. Wie lautet die Artikelnummer für Bestellungen und Ersatzteilabfragen? Die Artikelnummer lautet S802-1TM; diese Kennung erleichtert Bestellung, Lagerverwaltung und technische Rückfragen beim Vertrieb. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Shank Cutter For ADKT 1505 Indexable Inserts, M4x10 Torx Screw - Teknik Makina
Benefit from a compact, high-stability shank cutter offering a 25 mm diameter, 55 mm cutting length and compatibility with ADKT 1505 indexable inserts for reliable, repeatable milling operations; fast insert changes are enabled by an M4x10 Torx clamping screw. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. S318TM Shank Cutter by Teknik Makina — 25 mm diameter, for ADKT 1505 indexable inserts A S318TM shank cutter engineered for secure mounting of ADKT 1505 indexable inserts, designed to support industrial milling tasks where stability and straightforward insert replacement are essential. 25 mm diameter for stable cutting Compatible with ADKT 1505 inserts (ISCAR) M4x10 Torx clamping with T15 key 200 mm overall length, 55 mm cutting length Consistent cutting performance through robust geometry The cutter’s 25 mm diameter and two cutting edges provide a stable platform that reduces vibration and improves surface quality during interrupted and continuous milling. This geometry supports consistent chip formation and promotes predictable tool life, which is particularly valuable in production environments where repeatability is critical. The tool’s ADKT 1505 compatibility ensures access to a broad range of indexable insert grades, allowing process engineers to select the most appropriate grade for application optimisation. Fast, secure insert changes that save setup time Insert replacement is achieved with a single M4x10 Torx clamping screw using a T15 key, enabling secure tightening and quick service cycles. The simple clamping system reduces downtime during tool changes and minimises the risk of incorrect seating; this translates into higher machine utilisation and lower overall process cost. The 200 mm overall length combined with a 55 mm cutting length balances reach and rigidity for many standard milling set-ups. Designed for workshop efficiency and integration The cutter is compatible with insert geometries from manufacturers such as ISCAR, simplifying procurement and inventory management by allowing the use of widely available ADKT 1505 inserts. With a compact mass of 0.711 kg and moderate overall length, the shank cutter integrates easily into existing toolholders and collet systems. Specified dimensions and standard clamping hardware support straightforward documentation in tooling lists and facilitate rapid selection for CAM programming and fixture planning. Contact Metav Werkzeuge for technical clarification or to request detailed drawings and application guidance for the Teknik Cutting Tools S318TM shank cutter — our Emmerich team is available to advise on insert grades and mounting options. Technical data Article number: S318TM Manufacturer: Teknik Makina Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Torx screw: M4x10 Torx key: T15 Facts Diameter (mm): 25 Cutting length (mm): 55 Overall length (mm): 200 Cutting edges: 2 Weight (kg): 0.711 Special features For ADKT 1505 indexable inserts Torx clamping for rapid insert change Suitable for standard industrial milling holders FAQ Which inserts fit this shank cutter? The S318TM shank cutter is designed for ADKT 1505 indexable inserts and is compatible with ISCAR ADKT 1505 geometry. What are the key dimensions of the cutter? Key dimensions: 25 mm diameter, 55 mm cutting length, 200 mm overall length; weight approximately 0.711 kg. How is the insert secured? Inserts are secured with an M4x10 Torx screw; a T15 key is required for tightening and removal. Can the cutter be used with different insert grades? Yes, the shank cutter accepts ADKT 1505 inserts in various grades; selecting the correct grade depends on the workpiece material and machining strategy. Is a specific toolholder required? The shank diameter and overall length make the cutter compatible with common milling holders; confirm holder clamping range during tool selection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Shank Cutter For APXT 1003 Indexable Inserts 3 Flutes, 35mm Cutting Length, 90° - Teknik Makina
The combination of robust 25 mm shank rigidity and compatibility with APXT 1003 indexable inserts delivers stable, repeatable milling performance; benefit from a compact overall length and straightforward insert clamping for reduced setup time. Order the product directly via Metav Werkzeuge or ask the consultants if needed. Shaft milling cutter S148TM by Teknik Makina — 25 mm shank, for APXT 1003 indexable inserts Shaft milling cutter S148TM engineered for indexable insert milling in industrial production, designed to accept APXT 1003 inserts for efficient face and shoulder operations 25 mm shank diameter for high rigidity Compatible with APXT 1003 indexable inserts Three cutting edges for consistent material removal 90° cutting angle for accurate shoulder milling Greater stability through compact, rigid design The cutter is built around a 25 mm shank, which provides enhanced rigidity compared with smaller shanks and reduces deflection during interrupted cuts. The result is a more consistent surface finish and extended insert life. With a 100 mm overall length and a 35 mm effective cutting length, the tool minimises overhang while still offering sufficient reach for many commonplace milling tasks. These dimensional choices make the tool suitable for setups where a balance of accessibility and stiffness is required, reducing the need for additional stabilisation or multiple finishing passes. Fast, secure insert clamping reduces downtime Compatibility with APXT 1003 indexable inserts and the use of an M2.5x5.5 Torx screw (Torx key T8) allow for quick insert changes and reliable clamping. The three-edge insert arrangement spreads cutting forces evenly, which improves chip control and lowers the risk of localised insert fracture. Machines benefit from shorter tool-change intervals and predictable cutting behaviour, which supports higher machine utilisation and a smoother production flow. The tool is specified to accept Korloy-manufactured inserts, aligning with common workshop stocking strategies. Practical dimensions and handling for everyday workshop use Key dimensions are chosen for straightforward integration into standard toolholders and adapters. The 25 mm shank diameter pairs with common collet and shrink-fit holders, while the 35 mm cutting length suits many slotting and shoulder operations without excessive tool overhang. At a weight of 0.365 kg, the tool presents modest inertia for controlled acceleration and deceleration on CNC machines. These characteristics simplify clamping checks and balancing procedures and help maintain repeatability across batches, supporting predictable throughput in routine production environments. Application guidance and machining considerations The tool’s 90° cutting angle is intended for square-shoulder and face milling tasks where dimensional accuracy of the shoulder is required. The three cutting edges offer a balance between metal removal rate and surface integrity; selecting suitable feeds and speeds for the workpiece material will determine the achievable tool life and part quality. The design supports standard insert geometries and replacement routines, enabling maintenance teams to manage inventory efficiently. For precise machining parameters, follow the machine and insert manufacturer's guidelines to match cutting data to the workpiece and setup. For specification support or supply of the Teknik Makina S148TM, contact Metav Werkzeuge in Emmerich for tailored advice and order processing: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: S148TM Brand: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Numbers / Core Technical Data Shank diameter: 25 mm Cutting edges: 3 Overall length: 100 mm Cutting length (effective): 35 mm Weight: 0.365 kg Cutting angle: 90° Special features For APXT 1003 indexable inserts Compatible with Korloy inserts M2.5x5.5 Torx screw for insert clamping Torx key size T8 FAQ Which inserts fit this cutter? The cutter accepts APXT 1003 indexable inserts and is specified for inserts from Korloy compatible with that designation. How many cutting edges does the tool use and why does that matter? The tool uses three cutting edges, which balances metal removal rate and insert strength, promoting even wear and improved chip formation. What are the key dimensions to check for toolholder compatibility? Check the 25 mm shank diameter, 35 mm cutting length, and 100 mm overall length to ensure compatibility with the chosen holder and adequate clearance in the machine setup. What hardware is used to secure the insert? Insert clamping is via an M2.5x5.5 Torx screw, tightened with a T8 Torx key; follow the insert supplier’s tightening guidelines. Is the geometry suitable for square-shoulder milling? Yes—the 90° cutting angle is intended to produce accurate square shoulders and flat faces when correctly applied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Shank Cutter For ENMX 0905 Indexable Inserts, 2 Cutting Edges, 150mm Overall - Teknik Makina
Take advantage of a rigid Ø 25 mm shank and precise ENMX 0905 compatibility to achieve reliable chip control and stable machining; order through Metav Werkzeuge or consult our advisors for application-specific selection. Insert milling cutter S934TM — Insert milling cutter body Ø 25 mm for ENMX 0905 by Teknik Makina The Insert milling cutter S934TM is a robust milling tool body engineered for use with ENMX 0905 indexable inserts, providing a compact solution for consistent metal removal in industrial machining. Compatible with ENMX 0905 indexable inserts Ø 25 mm cutter body with 150 mm overall length Two cutting edges for stable material removal Torx M3.5×8.5 clamping with T15 key High rigidity and secure insert clamping for repeatable results The design centres on a Ø 25 mm external diameter and a 25 mm shank, which together increase torsional stiffness and reduce vibration during milling. With a total length of 150 mm, the body balances reach and rigidity, helping to keep tool deflection to a minimum. The clamping is executed via a Torx M3.5×8.5 screw tightened with a T15 key, delivering a consistent seat for ENMX 0905 indexable inserts and supporting predictable tool life. These measurable properties translate into fewer rework cycles and steadier surface quality across batch production. Efficient cutting performance driven by simple, proven geometry Equipped with 2 cutting edges, the cutter body promotes even chip formation and controlled material take‑off, which is particularly useful when alternating between light finishing passes and more aggressive cuts. Compatibility with inserts from YG‑1 ensures access to a wide range of grades and geometries, enabling optimisation of cutting parameters for different workpiece materials. The clear numeric values for diameter, length and edge count make it straightforward to calculate speeds and feeds, supporting faster process set‑up and reduced machine downtime. Practical handling and maintenance for workshop throughput The modular nature of an insert milling cutter body simplifies maintenance: worn inserts are replaced quickly without removing the holder from the spindle, while the Torx clamping system allows standardised torque application and repeatable seating. This reduces tool change time and inventory complexity. The cutter body is suitable for integration into existing tool sets where an Ø 25 mm holder is required, helping to streamline logistics and keep the tool crib concise. The combination of comparably simple maintenance and standard fittings supports reliable shopfloor routines and long‑term production planning. Discuss your application with Metav Werkzeuge to ensure the Teknik Makina insert milling cutter S934TM matches the intended machining strategy and to secure fast supply from our Emmerich hub Technical data Article number: S934TM Manufacturer: Teknik Makina Compatible inserts: ENMX 0905 Suitable insert producer: YG-1 Core dimensions Diameter: 25 mm Shank diameter: 25 mm Overall length: 150 mm Number of cutting edges: 2 Special features Torx screw: M3.5×8.5 Torx key: T15 ECLASS: 21180806 ETIM: EC011860 Description: for ENMX 0905 indexable inserts FAQ Which inserts fit this cutter body? The cutter body accepts ENMX 0905 indexable inserts and is documented as compatible with inserts from YG‑1; the S934TM is specified to seat those insert geometries securely. What are the critical dimensions to check for machine compatibility? Check the Ø 25 mm shank and the 150 mm overall length against spindle and toolchanger clearances; the S934TM requires a 25 mm holder interface. How is the insert secured and which tool is required? Inserts are clamped with a Torx M3.5×8.5 screw using a T15 key, enabling consistent tightening and straightforward insert replacement. How many cutting edges does the tool provide and what is the benefit? The tool body is configured with 2 cutting edges, which helps to balance chip evacuation and cutting force for steady material removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Shank Cutter For R390 1704 Indexable Inserts, 2 Cutting Edges, 90° - Teknik Makina
Take advantage of robust indexable‑insert milling with secure clamping and predictable wall‑finish results; the combination of a 25 mm shank and a 60 mm cutting length ensures rigidity and repeatable machining quality. Order directly via Metav Werkzeuge or consult Metav’s specialists for application guidance and supply. Shank milling cutter S530TM — compatible with R390‑1704 indexable inserts, 25 mm shank (Teknik Makina) The S530TM is a shank milling cutter designed for heavy‑duty and finishing operations with R390‑1704 indexable inserts, offering a square‑shoulder capability and reliable insert retention for production environments 25 mm shank diameter for stable clamping Compatible with R390‑1704 indexable inserts 90° cutting angle for square shoulders Torx M3.5x8.5 clamping screw, T15 key Stable clamping for consistent dimensional accuracy The tool is engineered to deliver a high level of rigidity through its 25 mm shank and precise geometry, reducing vibration during milling. Stable clamping minimises deflection and improves surface finish, which translates directly into fewer rework cycles and higher first‑pass yields. The cutter’s construction supports a 90° cutting angle, making it particularly suitable for producing square shoulders and faces where perpendicularity and planarity are decisive for downstream assembly or measurement. Productivity advantages through insert system and secure fastening By using R390‑1704 indexable inserts, the cutter permits rapid restoration of cutting edges without full tool replacement; the insert system shortens downtime and simplifies tooling logistics. The insert is secured with a Torx M3.5x8.5 screw and requires a T15 key for tightening, providing a reliable clamping interface that resists loosening under typical milling loads. Compatibility with Sandvik‑type inserts broadens tooling options and supports cost‑effective inventory management for production shops. Versatile usage and predictable process integration Configured with two cutting edges and a defined 60 mm cutting length, the cutter balances metal removal and finishing tasks for a range of materials commonly encountered in machining centres. The specified overall length 200 mm and a nominal diameter 25 mm permit use in holders and adaptors where space and reach are constrained. Technical clarity around the cutter’s dimensions allows straightforward integration into CAM setups and tool libraries, enabling accurate cycle‑time estimates and tool‑path validation. Maintainability and system compatibility The tool’s replaceable insert concept reduces lifecycle costs: worn inserts are exchanged quickly while the shank body remains in service. Clear specifications for the clamping screw and key facilitate maintenance procedures and spare‑parts provisioning. Matching the cutter with the correct insert grade and geometry ensures optimised cutting conditions and extended tool life, supporting predictable production planning and consistent part quality. For technical consultation and supply of the Teknik Makina S530TM shank milling cutter with R390‑1704 compatibility, contact Metav Werkzeuge for tailored recommendations and prompt delivery from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S530TM Manufacturer: Teknik Makina Product name (EN): Shank milling cutter for R390 1704 indexable inserts Core technical facts Shank diameter: 25 mm Cutting length (shank): 60 mm Overall length: 200 mm Diameter: 25 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.741 kg Clamping screw: M3.5x8.5 Torx key size: T15 Special features and compatibility Compatible inserts: R390‑1704 Suitable for inserts from: Sandvik Insert system: indexable inserts Application: face and shoulder milling Material: tool body materials as specified by manufacturer FAQ Which inserts fit this milling cutter? The S530TM is designed for R390‑1704 indexable inserts; insert compatibility includes Sandvik‑type R390‑1704 grades. What shank diameter and overall length does the cutter have? The shank diameter is 25 mm and the overall length is 200 mm, providing a stable mounting and sufficient reach for many milling tasks. How are the inserts secured in the cutter? Inserts are fastened with a Torx M3.5x8.5 clamping screw; a T15 Torx key is required for correct tightening. For which machining tasks is this cutter intended? The cutter is suitable for face and shoulder milling where a 90° cutting angle is required, balancing metal removal and finishing capabilities. Can the cutter body be reused after insert wear? Yes, the indexable‑insert system is intended for reuse of the cutter body; worn inserts are replaced to restore cutting performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Shank Cutter For RDMT 1003 Indexable Inserts, 2 Flutes 70mm Cutting Length - Teknik Makina
Take advantage of the combination of modular insert technology, a 25 mm shank for increased rigidity and a 70 mm cutting length for extended reach — ideal where uptime and predictable performance matter. Order directly via Metav Werkzeuge or ask the consultants if additional technical details are required. R212TM shank cutter – 25 mm shank, for RDMT 1003 indexable inserts (Teknik Makina) The R212TM shank cutter is a milling tool designed for industrial machining where quick insert changes and consistent cutting performance with RDMT 1003 indexable inserts are required. Compatible with RDMT 1003 indexable inserts Shank diameter 25 mm Two cutting edges for efficient stock removal Total length 200 mm, cutting length 70 mm Consistent productivity through modular insert technology The tool uses proven RDMT 1003 indexable inserts, which keep tooling costs predictable and maintenance simple. Because inserts are replaceable rather than the whole cutter, wear is managed by swapping small, standardised components — a direct saving in both consumable cost and machine downtime. The modular design supports consistent process parameters across batches, enabling stable cycle times and repeatable part quality. Rigidity and reach for stable machining results A 25 mm shank offers higher stiffness in typical milling holders, reducing vibration and improving surface finish on the workpiece. With a 70 mm cutting length and 200 mm overall length, the cutter provides extended reach for deeper pockets or stepped features while maintaining control. The tool’s two cutting edges balance material removal rate and finish, making it suitable for a wide range of conventional milling tasks that demand predictable tool behaviour. Fast insert changes minimise production interruption Insert retention is managed by a M3.5 locking screw and a M3,5x8,5 Torx screw, which are tightened using a T15 key for secure, repeatable fixing. This configuration allows rapid replacement of worn inserts with minimal handling time, so set-up and maintenance intervals become shorter and more efficient. Simple, standardised fastenings also reduce the risk of assembly errors and keep tool change procedures uniform across the workshop. Practical workshop integration and supply reassurance The cutter’s nominal dimensions and weight (listed in the technical data) make it straightforward to fit into existing tool holders and storage routines. At the same time, sourcing via an established supplier provides an operational advantage: confident availability from a European distribution base means fewer supply interruptions and a consistent quality filter for incoming stock. The combination of proven insert geometry and a robust shank helps machine shops maintain throughput without compromising on repeatability. For assured compatibility with RDMT 1003 inserts and the rigidity of a 25 mm shank, contact Metav Werkzeuge for personalised supply and technical advice — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: R212TM Manufacturer: Teknik Makina Facts Shank diameter: 25 mm Cutting length: 70 mm Overall length: 200 mm Cutting edges: 2 Weight: 0.747 kg Special features Compatible inserts: RDMT 1003 Locking screw: M3.5 Torx screw: M3,5x8,5 Torx key size: T15 FAQ Which indexable inserts fit this cutter? The R212TM accepts RDMT 1003 indexable inserts for straightforward insert replacement and consistent cutting geometry. How are inserts secured in the cutter? Inserts are fixed with a M3.5 locking screw and a M3,5x8,5 Torx screw, tightened with a T15 key for repeatable clamping. What are the key dimensions to check for machine compatibility? Key dimensions are a 25 mm shank diameter, 70 mm cutting length and 200 mm overall length; the tool weight is 0.747 kg. How many cutting edges does the tool have? The cutter features two cutting edges, offering a balance between efficient material removal and surface quality. Which tool holders are required? A tool holder or adaptor that accepts a 25 mm shank is required to mount the R212TM securely. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Shank Cutter For RPMW 10T3 Indexable Inserts, 2 Flutes, M3.5x8.5 Torx Screw - Teknik Makina
Take advantage of a robust combination of stable shank interface and quick insert changes for reliable machining cycles; the 25 mm shank and compatibility with RPMW 10T3 indexable inserts ensure repeatable results and straightforward tool maintenance. Order the cutter directly via Metav Werkzeuge or consult our specialists for integration advice. Shank milling cutter R318TM by Teknik Makina — 25 mm shank, for RPMW 10T3 indexable inserts The Shank milling cutter R318TM is a compact indexable milling body designed for versatile face and shoulder milling operations where a secure shank connection and fast insert replacement are essential 25 mm shank diameter for standard holders Compatible with RPMW 10T3 Korloy inserts Two cutting edges for efficient material removal Torx M3.5×8.5 clamping screw, T15 key required Stable connection for consistent machining quality A solid 25 mm shank provides a rigid interface with standard tool holders, reducing runout and vibration during cutting. This rigidity improves surface finish and lowers the risk of premature insert wear, which translates into fewer tool changes and less rework. For production environments that demand steady repeatability, a dependable shank-to-holder fit is a direct advantage to process reliability and uptime. Indexable-insert system that boosts productivity Designed for use with RPMW 10T3 indexable inserts, the tool body enables rapid edge changes without regrinding, offering a clear cost-per-cut benefit over solid cutters. The insert system from Korloy supports simple rotation or replacement of the cutting edge, reducing downtime between operations. This arrangement is especially suitable where quick restorative actions are needed to keep cycles moving and where predictable cutting performance is valued. Secure clamping and straightforward servicing The clamping arrangement uses an M3.5×8.5 Torx screw and requires a T15 key, delivering positive insert retention and effortless servicing on the shop floor. With an overall length of 160 mm and two cutting edges, the design balances accessibility and rigidity for many medium-reach tasks. Maintenance routines are simplified: a single tightening tool and standard replacement inserts allow rapid turnaround during shift changes, supporting continuous operation and easier tool inventory management. Explore the Teknik Makina R318TM with its 25 mm shank — contact Metav Werkzeuge in Emmerich for technical advice, availability and to discuss how this milling cutter can fit into existing tool setups Technical data Article number: R318TM Manufacturer: Teknik Makina Designation: Shank milling cutter for RPMW 10T3 indexable inserts Data Shank diameter (mm): 25 Diameter (mm): 25 Overall length (mm): 160 Cutting edges: 2 Special features Compatible insert: RPMW 10T3 Suitable insert manufacturer: Korloy Clamping screw: M3,5x8,5 (Torx) Torx key: T15 eCl@ss: 21180806 ETIM: EC011860 SKU: R318TM FAQ Which inserts fit this cutter? The R318TM is designed for RPMW 10T3 indexable inserts; the tool body is compatible with Korloy RPMW 10T3 inserts as specified. What is the shank diameter and why does it matter? The shank diameter is 25 mm; a correct shank size ensures a stable connection to the holder and reduces runout for improved cutting accuracy. How is the insert secured in the tool? Insert clamping is achieved with an M3.5×8.5 Torx screw; a T15 key is required for tightening and removal to ensure reliable retention. What operations is this cutter intended for? The milling body is intended for general face and shoulder milling where an indexable system and a standard shank interface are advantageous for productivity and quick insert changes. Can standard workshop tools be used for maintenance? Yes, maintenance requires a standard T15 Torx key for the specified clamping screw, making insert changes straightforward with common workshop tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Shank Cutter For RPMW 1204 Indexable Inserts, 2 Flutes, 160mm - Teknik Makina
Reliable milling performance with a 25 mm shank and secure clamping via an M4x7 Torx screw ensure stable, repeatable results. Compatibility with RPMW 1204 indexable inserts provides fast insert changes and a controlled setup. Order or request advice through Metav Werkzeuge for tailored delivery and technical support. Shaft Cutter R325TM — insert milling cutter for RPMW 1204, 25 mm The Shaft Cutter R325TM is an insert milling cutter optimised for stable, repeatable finishing and plunge milling using RPMW 1204 indexable inserts 25 mm shank for high rigidity Compatible with RPMW 1204 inserts M4x7 Torx screw, T15 key 160 mm overall length Maximise setup stability with a solid shank design The combination of a 25 mm shank and a precisely manufactured body improves tool stability during machining, reducing vibration and supporting consistent surface quality. A rigid shank reduces deflection under load, which is particularly important when repeatability and adherence to tight tolerances are required. The milling tool’s 160 mm overall length offers a practical balance between reach and stiffness, making it suitable for operations where a defined working length is necessary without compromising control. These characteristics translate directly into predictable machining behaviour and fewer setup corrections over repeated runs. Fast insert changes and secure clamping for efficient workflows Fast, reliable insert retention is provided by an M4x7 Torx screw that is tightened with a T15 key, enabling secure clamping and straightforward replacement of indexable inserts. Compatibility with RPMW 1204 inserts from recognised manufacturers streamlines stocking and reduces changeover time, since inserts can be swapped without requiring regrinding or rebalancing. The tool’s two cutting edges support economical material removal strategies while keeping spare-part handling simple. Clear mechanical fixing reduces the risk of incorrect seating and helps maintain process stability across shifts. Practical choice for professional workshops and tooling suppliers Designed and supplied by an established tooling brand, this milling cutter supports orderly tool management in workshop environments and trade operations. The straightforward mechanical concept keeps maintenance low and enables fast checks of clamping integrity before production. For procurement and supply chains, the clear compatibility with standard RPMW 1204 inserts and the defined fastening specification simplify purchasing decisions and inventory planning. Documentation of the tool’s core specifications ensures traceability and aids tool-room cataloguing for larger assemblies and fixtures. For supply enquiries or detailed technical advice on the Teknik Makina Shaft Cutter R325TM, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for prompt, specialist assistance. Technical data SKU: R325TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Dimensions & core data Diameter: 25 mm Shank diameter: 25 mm Overall length: 160 mm Cutting edges: 2 Compatibility & fastening Compatible inserts: RPMW 1204 Compatible insert manufacturer: Korloy Torx screw: M4x7 Torx key: T15 FAQ What inserts fit the cutter? The cutter accepts RPMW 1204 indexable inserts; the R325TM is specified for that insert format and is compatible with Korloy RPMW 1204 inserts. How is the insert secured in the tool? Inserts are clamped with an M4x7 Torx screw, tightened using a T15 key, providing a reliable mechanical fixation for repeatable milling. What are the key dimensions to check for fixture compatibility? Verify the 25 mm shank diameter and 160 mm overall length for toolholder and clearance compatibility when integrating the R325TM into a machining setup. How many cutting edges does the tool have and what does that mean for use? The tool has 2 cutting edges, which offers a balance between efficient material removal and straightforward insert management for maintenance and inventory control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Shank Cutter For TPKN 1103-2204 Indexable Inserts, 2 Flutes 45mm Cutting Length - Teknik Makina
Take advantage of the combination of robust fastening, compatible indexable inserts and a compact 25 mm shank for reliable milling performance; order this shank milling cutter directly via Metav Werkzeuge or contact our consultants for specification support. S118TM — Indexable insert milling cutter by Teknik Makina, 25 mm shank for TPKN 1103-2204 S118TM is an indexable insert milling cutter designed for efficient slotting and face milling in general machining applications, compatible with TPKN 1103-2204 inserts and engineered for stable, repeatable performance 25 mm shank for secure clamping Compatible with TPKN 1103-2204 inserts 45 mm cutting length for deeper passes Two cutting edges for stable material removal High material removal with predictable performance The S118TM indexable milling cutter is built to deliver consistent chip removal through its two cutting edges, allowing controlled cutting forces and steady tool life. With a 25 mm shank and a total length of 120 mm, the design supports rigid clamping in standard toolholders and reduces deflection during heavier passes. Compatibility with TPKN 1103-2204 indexable inserts simplifies inventory management: triangular inserts offer quick indexing and cost-efficient edge replacement, which translates into lower machining downtime and predictable production throughput. Secure clamping and straightforward tool set-up Clamping is achieved via an M6x14 torx screw; an Allen key size 3 is used to secure the insert seat, which facilitates quick insert changes and reduces maintenance time. The 45 mm cutting length provides sufficient engagement for deeper slotting operations while maintaining balance between reach and stiffness. The cutter’s moderate mass (approximately 0.438 kg) contributes to vibration damping without unnecessary inertia, supporting stable surface quality and extended insert life in routine workshop applications. Designed for workshop reliability and streamlined sourcing This indexable cutter is intended for workshops and small production lines that prioritise flexibility and low lifecycle cost. By accepting widely used TPKN 1103-2204 inserts, the tool enables straightforward repurposing across materials and part geometries when combined with the appropriate insert grade. The compact shank and familiar fixing concept simplify integration into existing tool sets, while the overall construction supports repeatable set-up, reducing inspection cycles and improving throughput. For procurement, Metav Werkzeuge provides fast access and verification from its Emmerich quality hub, ensuring traceable supply for industrial users. Contact Metav Werkzeuge for tailored technical advice and local supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S118TM Manufacturer: Teknik Makina Compatible inserts: TPKN 1103-2204 For inserts: TPKN 1103 Core specifications Diameter: 25 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 2 Weight: 0.438 kg Design & fixing Torx screw: M6x14 Torx key: 3 Allen Indexable insert type: TPKN 1103 Application: Indexable insert milling cutter FAQ Which inserts fit this cutter? The S118TM accepts TPKN 1103-2204 indexable inserts; the cutter is configured specifically for the TPKN 1103 family to allow quick indexing and economical edge changes. What shank size is required for mounting? The tool features a 25 mm shank, so a toolholder or arbor compatible with a 25 mm shank is required for correct clamping and axial support. How is the insert secured? Inserts are secured with an M6x14 torx screw; an Allen key size 3 is specified for tightening and removal of the screw. What typical operations suit this cutter? This indexable insert milling cutter is suitable for slotting and face milling operations where the 45 mm cutting length and two cutting edges provide controlled material removal and stable surface finish. Is the cutter supplied with inserts? Insert supply is separate; the S118TM is designed to be used with TPKN 1103-2204 inserts that should be selected according to workpiece material and cutting parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Shank Cutter for VCGT 1604 Indexable Inserts, 2 Flutes 60mm Cutting Length - Teknik Makina
Take advantage of a 25 mm shank and secure Torx clamping for stable, vibration-reduced machining combined with the flexibility of VCGT 1604 indexable inserts; the result is efficient tool changes and consistent surface quality — order directly via Metav Werkzeuge or consult our experts for application advice. Shank milling cutter S724TM – 25 mm shank, for VCGT 1604 indexable inserts (Teknik Makina) Shank milling cutter S724TM for modular milling applications, engineered to accept VCGT 1604 indexable inserts for reliable production use across workshop and light industrial settings. 25 mm shank for rigid toolholding Designed for VCGT 1604 indexable inserts Two cutting edges for efficient machining Torx clamping M4x10, T15 specification Stable clamping for consistent surface finish The combination of a 25 mm shank and a substantial 250 mm overall length provides a balance between reach and stiffness, reducing chatter in interrupted or continuous cuts. A robust shank diameter improves toolholder contact and transfer of cutting forces, which in turn helps maintain repeatable accuracy and prolongs tool life. The tool’s mass (approx. 0.92 kg) contributes to damping of vibrations during heavy engagement, resulting in smoother machining and a more reliable surface finish without increasing setup complexity. Modular insert system for fast production cycles Using VCGT 1604 indexable inserts enables quick edge changes and lower tooling costs per cutting edge compared with solid tools. The modular insert approach allows worn edges to be rotated or replaced without removing the entire cutter, minimizing downtime and supporting a higher parts-per-shift output. Secure locating and clamping are achieved with an M4x10 Torx screw (T15), ensuring stable insert retention during high-feed passes and enabling predictable performance in repetitive operations. Designed for practical workshop integration With two cutting edges and a 60 mm cutting length, this milling head is suited to operations where efficient material removal and controlled chip formation are priorities. The design supports straightforward handling during tool setup and insert changeovers, and the clear specification of clamping hardware simplifies maintenance procedures. As a modular milling solution, it fits into established tool systems and can be combined with compatible toolholders and machine set-ups for flexible use in series production or jobbing shops. For modular milling solutions by Teknik Makina and reliable supply from Metav Werkzeuge, contact our team for tailored recommendations and order coordination: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S724TM Manufacturer: Teknik Makina Brand: Teknik Makina Facts Shank diameter: 25 mm Cutting length (shaft): 60 mm Overall length: 250 mm Cutting edges: 2 Weight: 0.92 kg Diameter: 25 mm eClass: 21180806 ETIM: EC011860 Special features Compatible with VCGT 1604 indexable inserts Torx screw: M4x10 Torx key specification: T15 SKU: S724TM Files: 62de7e4fbd24461b3d5f7a29, 62de7ee50f56dbb4de4dbf58 FAQ Which inserts are compatible with this cutter? The cutter accepts VCGT 1604 indexable inserts; the modular system makes insert selection and replacement straightforward. How is the insert secured in the cutter? The insert is clamped with an M4x10 Torx screw; the specified driver size is T15 for secure tightening. What shank diameter is required for the toolholder? A toolholder or arbor suitable for a 25 mm shank is required to ensure correct clamping and rigidity. How many cutting edges does the tool provide? The cutter has two cutting edges, offering a balance between cutting efficiency and chip control. Is the overall length suitable for extended reach operations? With an overall length of 250 mm, the tool provides extended reach while retaining a shank diameter that supports stable machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Shank Cutter For XNKU 06T3 Indexable Inserts With Internal Coolant, 90mm Cutting Length - Teknik Makina
Combining a 25 mm shank, internal coolant and compatibility with XNKU 06T3 indexable inserts, this cutter delivers stable chip control and repeatable results for industrial milling. Order the S780-1TM directly via Metav Werkzeuge or ask our consultants for application support. 25 mm Shank Cutter S780-1TM — 160 mm overall length, internal coolant (Teknik Makina) The 25 mm Shank Cutter S780-1TM is a four‑flute milling cutter designed for heavy-duty machining with XNKU 06T3 indexable inserts, suited to CNC milling tasks in metalworking and toolrooms. 25 mm shank diameter Internal coolant supply Compatible with XNKU 06T3 inserts Four cutting edges for efficient stock removal Rigidity and cutting performance for consistent results The S780-1TM is built around a 25 mm shank and a 160 mm overall length, providing the axial reach required in many workshop and production scenarios while maintaining spindle stability. The four flutes balance material removal rate and surface finish: additional cutting edges allow higher feed per tooth and improve productivity without compromising the workpiece quality. For users less familiar with cutter geometry, more flutes usually mean smoother finishes and higher metal‑removal rates when cutting with suitable feeds and speeds. The robust design supports repeated, reliable passes on standard milling operations. Optimised chip evacuation and tool life through internal cooling Integral internal coolant channels deliver cutting fluid directly to the cutting zone, which reduces edge temperatures and improves chip breaking. This targeted coolant supply helps to extend the life of the XNKU 06T3 indexable inserts and contributes to more consistent dimensional results across batches. In practice, through‑coolant operation reduces the risk of built‑up edge and can enable higher cutting parameters than external coolant alone. The result is improved process stability and fewer unexpected tool changes during long production runs. Compatibility, maintenance and workshop practicality The cutter accepts XNKU 06T3 indexable inserts and is compatible with inserts from Palbit, making replacement and inventory management straightforward where those inserts are already in use. Serviceability is simplified: the head fastening uses a Torx system (Torx key T8) with screw specification M2.5x5.5, allowing secure clamping and quick insert exchange with common workshop tools. The 90 mm cutting length supports deeper engagement when required, while the cutter’s balanced construction keeps vibrations low for improved surface integrity. Produced by Teknik Makina and supplied under SKU S780-1TM, the tool suits manufacturers seeking robust, repeatable performance from a standardised cutting system. Contact Metav Werkzeuge to discuss your application and secure the Teknik Makina S780-1TM with internal coolant from our Emmerich warehouse Technical Data SKU: S780-1TM Manufacturer: Teknik Makina Product type: Shank cutter Key dimensions Shank diameter: 25 mm Overall length: 160 mm Cutting length: 90 mm Number of flutes: 4 Weight: 2.325 kg Special features Internal coolant Compatible with XNKU 06T3 indexable inserts Compatible insert manufacturer: Palbit Torx key: T8 Torx screw: M2.5x5.5 FAQ What insert type does this cutter use? The cutter is designed for XNKU 06T3 indexable inserts and is compatible with inserts from Palbit for straightforward replacement. Does this milling cutter have through‑coolant capability? Yes — the S780-1TM features internal coolant channels to feed cutting fluid directly to the cutting edge for improved tool life and chip evacuation. What shank diameter and overall length are specified? Shank diameter is 25 mm with an overall length of 160 mm, providing a balance of reach and rigidity for many CNC milling setups. How many cutting edges does it have and what are the benefits? The tool has four flutes, which promote efficient stock removal and a smoother surface finish when used with the correct feeds and speeds. Which brand manufactures this cutter and what is the SKU? The cutter is manufactured by Teknik Makina and is stocked under SKU S780-1TM for easy ordering and reference. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Shank End Mill for LNMX 0603 Indexable Inserts, 4 Cutting Edges - Teknik Makina
Take advantage of the combination of secure clamping, compatibility with LNMX 0603 indexable inserts and a rigid Ø25 mm shank for uninterrupted milling performance — order the Shaft cutter S286TM directly via Metav Werkzeuge or ask our consultants if needed Shaft cutter S286TM – indexable milling cutter, Ø25 mm, 4 cutting edges | Teknik Makina The Shaft cutter S286TM is an indexable milling tool engineered for use with LNMX 0603 inserts, designed for stable face and slot milling in production and workshop environments Ø25 mm cutting diameter Compatible with LNMX 0603 inserts Korloy Four cutting edges for stable milling Shank Ø25 mm, overall length 140 mm Consistent milling performance that reduces downtime As an indexable milling cutter, this tool is built to deliver consistent cutting cycles while keeping maintenance intervals short. Compatibility with LNMX 0603 inserts means changeovers are fast and predictable; worn edges are replaced rather than the entire tool, lowering tooling expenditure and minimising machine downtime. The compatibility with Korloy insert geometries ensures access to a broad range of grades and chipbreakers, allowing process optimisation for different operational demands without altering the cutter body or clamping arrangement. Rigidity and balance for accurate finishes Rigidity is provided by a substantial Ø25 mm shank and a measured overall length of 140 mm, supplying the necessary stiffness for repeatable results across batch runs. The cutter features four cutting edges, which balance material removal rate and surface quality: fewer vibrations, improved tool life for the inserts, and a more consistent component finish. Reduced runout and even load distribution from the robust shank geometry contribute directly to tighter tolerances and lower scrap rates in serial production. Quick, secure insert clamping for operational efficiency Insert changes are secured via an M3x7 Torx screw and driven with a T8 key, allowing straightforward, toolroom-friendly replacement of indexable inserts. The clamping arrangement is engineered to ensure a firm seat for each LNMX 0603 plate, promoting repeatable seating and stable cutting forces. Faster insert swaps and reliable torque specification translate into less machine idle time and simplified workshop routines, particularly in multi-shift or mixed-production environments. Wide applicability with standardised insert systems Designed around the widely used LNMX 0603 insert format, the cutter is suitable for numerous milling tasks where an indexable solution is preferred over solid-end alternatives. The modular approach—cutter body plus standardised inserts—supports quick adaptation to changing job requirements by selecting the appropriate Korloy insert grade for a given material or surface quality target. The S286TM from Teknik Makina therefore provides a practical middle ground between flexibility and process stability for general milling operations Discuss application suitability with Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 and arrange supply of the S286TM from Teknik Makina through our Emmerich hub Technical Data Article number: S286TM Brand / Manufacturer: Teknik Makina SKU: S286TM ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 25 mm Shank diameter (aufnahme): 25 mm Overall length: 140 mm Cutting edges: 4 Special features For LNMX 0603 indexable inserts Compatible with Korloy inserts Torx screw M3x7, Torx key T8 Indexable milling cutter design FAQ What insert format does this cutter accept? The cutter accepts LNMX 0603 indexable inserts; the body is configured for that insert geometry to ensure correct seating and chip formation. Which insert manufacturers are compatible? This tool is compatible with Korloy inserts and with other suppliers following the LNMX 0603 standard; selection of grade depends on the workpiece material and cutting strategy. What are the shank and overall dimensions? The shank diameter is 25 mm and the overall length measures 140 mm, dimensions that favour stiffness and stability in typical milling setups. How are inserts secured to the cutter? Inserts are clamped with an M3x7 Torx screw and tightened using a T8 key, ensuring secure and repeatable clamping for reliable machining. Is the S286TM suitable for high-production environments? Yes, the modular indexable design of the S286TM by Teknik Makina suits repeated production cycles where quick insert changes and predictable performance are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Shank End Mill For P32 Indexable Inserts, 66mm Cutting Length - Teknik Makina
Take advantage of a compact milling solution that combines stable clamping with direct compatibility with P32 indexable inserts; the robust 25 mm shank and 66 mm cutting length ensure consistent engagement and repeatable set‑ups. Order the tool directly via Metav Werkzeuge or consult the team for application advice. S380TM Shaft cutter — compatible with P32 indexable inserts, 25 mm shank (Teknik Makina) A S380TM shaft cutter designed to accept P32 indexable inserts for reliable milling in standard production and workshop environments 25 mm shank diameter for stable clamping 66 mm cutting length for deeper engagement Compatible with P32 indexable inserts by Walter Consistent performance through proven geometry and insert compatibility The milling arbor is engineered to deliver consistent engagement with replaceable cutting edges, which reduces downtime for tool changes and simplifies inventory management. Fitted for P32 indexable inserts, the holder keeps the insert seat and clamping plane aligned, lowering the risk of misalignment and excessive runout. The combination of a 25 mm shank and a 66 mm cutting length supports stable cutting forces during moderate depth passes, promoting predictable chip formation and contributing to longer tool life for the insert system. Secure fastening and straightforward set-up for repeatable results Clamping is performed via an M6 Torx screw that requires a 3 Allen key, providing a compact but secure connection between insert and body. This fastening solution ensures the insert remains seated under cutting loads and simplifies re‑clamping after index changes. Reduced set‑up complexity leads to faster changeovers and higher machine uptime; where precision matters, the repeatability of the interface between arbor and insert delivers tighter dimensional control than ad‑hoc clamping methods. Versatile integration into machining cells and standard workflows The tool is suitable for milling operations that utilise replaceable inserts and is presented with a standard overall length of 200 mm and a cutter diameter of 25 mm, enabling straightforward integration into tool magazines and holders designed for shank tooling. Compatibility with inserts from recognised suppliers such as Walter helps maintain a predictable supply chain for cutting edges, while the standardised interface supports a range of common machining tasks without the need for bespoke adapters. Reliability, supply and the advantages of indexable tooling Choosing an indexable solution reduces per‑cutting‑edge cost and simplifies maintenance: worn edges are replaced rather than the entire tool body, which lowers life‑cycle expenditure in the long term. The robust construction (weight approx. 0.745 kg) and standardised clamping support high repeatability in serial production. Metav’s distribution from Emmerich provides a practical procurement route and a quality filter for European customers seeking dependable delivery and product conformity. For tailored advice on integrating the S380TM into existing toolsets or to request a quotation via Metav Werkzeuge (Emmerich), contact the Metav team by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: S380TM Manufacturer: Teknik Makina Product: Shaft cutter for P32 indexable inserts Facts Shank diameter: 25 mm Cutting length: 66 mm Total length: 200 mm Diameter: 25 mm Weight: 0.745 kg Special features Compatible inserts: P32 25 Compatible insert manufacturer: Walter Torx screw: M6 Required key: 3 Allen Files (IDs): 62de7e540f56dbb4de4dbf09, 62de7ee7148ec6b71020ffc5 FAQ Which insert type fits this cutter? The cutter accepts P32 indexable inserts; the seat and clamp are configured for the P32 25 style inserts. How is the cutting edge secured? An M6 Torx screw secures the insert; the connection requires a 3 Allen key for tightening and removal. What are the key dimensions to check for toolholder compatibility? Relevant dimensions include the 25 mm shank diameter and a total length of 200 mm, plus a cutting length of 66 mm. Is the cutter compatible with inserts from other manufacturers? The cutter is specified for P32 inserts and is listed as compatible with inserts from Walter; other manufacturers with the same P32 seating geometry may be suitable. What operational benefits does an indexable system provide? Indexable tooling reduces per‑edge cost, speeds up replacement, and maintains consistent cutting geometry across multiple re‑indexings, improving production efficiency and repeatability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com