High-precision clamping holders with internal coolant for extended tool life
Clamping holders with internal coolant are designed to secure indexable inserts accurately while delivering coolant directly to the cutting edge, reducing thermal load and improving chip evacuation in demanding metalworking operations. Used for turning and internal machining of tough materials, these holders channel the coolant through built-in boreholes to the insert and beneath the chip, which boosts tool life and enhances surface finish. As a reliable system solution, the combination of clamping holder, internal coolant and indexable insert ensures consistent performance at high cutting speeds and under heavy cut conditions.
20mm SDJCL 2020 K11 For DCMT 11T3 Indexable Inserts Innenkühlung Linksschneidend 93° - Teknik Makina
Take advantage of a compact, left‑hand clamping toolholder that combines precise compatibility with DCMT 11T3 indexable inserts, a 93° cutting approach and a slim 20 mm shank for stable turning. Order directly via Metav Werkzeuge or consult the team for tailored application advice. SDJCL 2020 clamping toolholder by Teknik Makina — left‑hand, for DCMT 11T3 inserts, 125 mm overall length The SDJCL 2020 clamping toolholder is a left‑hand turning holder engineered for use with DCMT 11T3 indexable inserts, providing a compact 125 mm profile for space‑saving external turning setups. For DCMT 11T3 indexable inserts Left‑hand cutting orientation 125 mm overall length Robust 20 mm shank height Maximum rigidity with a compact profile The holder is designed to deliver rigidity in a compact form: an overall length of 125 mm and a 20 mm shank height combine to reduce overhang while maintaining stability during external turning. A cutting angle of 93° helps position the insert for predictable engagement, which reduces vibration and supports consistent surface finish. The holder’s modest mass (approximately 0.404 kg) balances inertial damping with ease of handling, making it suitable for short‑run changeovers and repetitive production tasks where tool stability is critical. Quick, repeatable insert clamping for efficient production Clamping systems determine how reliably an insert holds its geometry under load. This toolholder is specified for DCMT 11T3 indexable inserts and the ISO designation SDJCL 2020 identifies the shank form and mounting interface. The design emphasises repeatable seating and secure fixing, which minimises index‑to‑index variation and accelerates tool changes. Reduced downtime and fewer adjustments translate into tangible productivity benefits: more consistent cycle times and less part rework in series turning. Predictable cutting geometry for consistent results Using a standard insert size like DCMT 11T3 allows for predictable approach and chip control across different machines and operators. The toolholder’s head width (25 mm) and cutting height (25 mm) align the insert at the intended datum height, ensuring the correct engagement angle without additional shims. For engineers and machinists who depend on repeatable set‑ups, this stability simplifies process planning and supports consistent part tolerances over extended runs. Built for workshop reliability and straightforward integration The clamping toolholder’s ISO coding (SDJCL 2020) and its direct compatibility with common indexable inserts make it easy to integrate into existing tool stations and turret configurations. The left‑hand orientation suits operations where tool path and lathe set‑ups require a reversed approach. Combined with Metav’s logistical and quality oversight, the holder is presented as a dependable component for both independent workshops and production departments seeking a dependable supply chain and consistent product quality. For secure delivery and application guidance, contact Metav Werkzeuge — the partner for democratised precision and reliable European supply: eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific turning tasks and machine interfaces. Technical data Article number: D366TM Manufacturer: Teknik Makina ISO designation: SDJCL 2020 Compatible inserts: DCMT 11T3 Cutting direction: left SKU: D366TM Facts Overall length: 125 mm Shank height: 20 mm Shank width: 20 mm Head width: 25 mm Cutting height: 25 mm Cutting angle: 93° Weight: 0.404 kg Special features SDJC design for DCMT indexable inserts Left‑hand cutting orientation Compact, space‑saving profile Repeatable clamping interface Teknik Makina product FAQ What inserts fit this holder? The holder is compatible with DCMT 11T3 indexable inserts; the SDJCL 2020 interface secures the DCMT geometry for predictable cutting performance. Is this holder suitable for right‑hand turning? This specific toolholder is manufactured for left‑hand cutting orientation; a right‑hand version is required for conventional right‑hand turning. What is the overall length and shank size? The toolholder has an overall length of 125 mm and a shank height/width of 20 mm, balancing reach with rigidity for external turning. How does the clamping system affect productivity? The clamping interface on the SDJCL 2020 minimises index‑to‑index variation, enabling faster insert changes and more consistent cycle times when used with DCMT 11T3 inserts. Can the holder be integrated into existing turrets? Yes — the ISO designation and standard shank dimensions facilitate integration into common turret mounts and lathe tool stations provided the turret accommodates a 20 mm shank. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm SDNCN 2020 K11 For DC-- 11T3 Indexable Inserts, 62.5° Schneidwinkel, Innenkühlung, Rechtsschneidend - Teknik Makina
Combine the 62.5° cutting angle and the SDNCN 2020 clamping concept for consistent turning results; compatible with DC-- 11T3 indexable inserts and offering a 125 mm overall length for secure reach. Order the tool directly via Metav Werkzeuge or ask our consultants if needed. Clamping holder SDNCN 2020 — SDNCN toolholder for DC-- 11T3 indexable inserts (Teknik Makina) Clamping holder SDNCN 2020 for external turning operations, designed to accept DC-- 11T3 indexable inserts and to provide a balance of reach and rigidity in precision workshops SDNCN 2020 ISO designation Compatible with DC-- 11T3 inserts 20 mm clamping height 62.5° cutting angle for precise cuts 125 mm overall length Consistent cutting performance for industrial turning The SDNCN 2020 design delivers a predictable cutting geometry thanks to its defined 62.5° cutting angle, which supports stable chip formation and consistent surface finish. As a clamping-style toolholder for indexable inserts, it removes the need for regrinding; replaced inserts restore original geometry instantly, reducing setup variation. This reliability translates directly into improved process stability on production runs, enabling higher first-pass yields and fewer in-process adjustments. Dimensions and rigidity explained for reliable setups Key dimensions influence rigidity and accessibility: a 20 mm clamping height combined with a 125 mm overall length gives a measured compromise between reach and stiffness, while the 10 mm cutting-head width and 20 mm body width concentrate mass where support is most effective. The modest mass of 0.39 kg reduces inertial load on turrets and tool posts, making the holder suitable for medium-duty turning where controlled vibration and accurate positional repeatability matter. Faster insert handling and standardised fit for workshop efficiency The SDNCN form factor is a standardised external turning interface that accepts DC-- 11T3 indexable inserts, simplifying stock management and reducing tool-change time. The holder’s K11 shank designation facilitates correct engagement with compatible tool posts and bores, while the clamping concept enables secure retention of the insert during moderate cutting forces. The resulting benefit is shorter downtime during insert changes and predictable clamp performance across batches. Where this holder adds value in daily production This toolholder suits general turning and finishing tasks in metalworking shops that rely on indexable tooling for quick turnaround. Its measured geometry supports consistent surface quality and repeatable cutting conditions, which is especially beneficial in small to medium production runs. Paired with quality inserts and stable turret setups, the holder contributes to efficient machining cycles and easier process documentation for quality control. Contact Metav Werkzeuge to discuss how the Teknik Makina SDNCN 2020 clamping holder fits specific turning tasks and to confirm current availability from Emmerich; consultants are reachable at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D122TM Manufacturer: Teknik Makina Product name: Clamping holder SDNCN 2020 ECLASS: 21181004 Facts Clamping height: 20 mm Cutting-head width: 10 mm Width: 20 mm Cutting height: 25 mm Cutting angle: 62.5° Overall length: 125 mm Weight: 0.39 kg Special features ISO designation SDNCN 2020 Compatible inserts: DC-- 11T3 Shank designation: K11 Design for indexable inserts SDNCN for DC-- indexable inserts FAQ Which indexable inserts fit this holder? The holder is specified for DC-- 11T3 indexable inserts; the SDNCN geometry secures these inserts in the correct cutting position. What are the key dimensions affecting rigidity and reach? Primary dimensions are the 20 mm clamping height and 125 mm overall length, with a 10 mm cutting-head width and 0.39 kg mass influencing stiffness and dynamic behaviour. Is the cutting angle suitable for finishing passes? The 62.5° cutting angle provides a geometry geared towards controlled cutting forces and predictable chip flow, which supports high-quality finishing when combined with appropriate inserts and cutting parameters. How is the insert retained and changed? The SDNCN clamping concept secures the insert with a dedicated clamp geometry, enabling fast index changes and stable retention during typical turning operations. Which holder interface does this product use? The toolholder carries the K11 shank designation for mounting; matching the shank interface to the turret or tool post ensures stable seat and correct alignment. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm SRGCL 2020 K10 For RCMT 10T3 Indexable Inserts Innenkühlung Linksschneidend 30° - Teknik Makina
Take advantage of a rigid clamping solution with precise geometry and proven compatibility with RCMT indexable inserts for reliable turning cycles; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. Clamping holder SRGCL 2020 — SRGC for RCMT indexable inserts, left‑hand, 30° lead The Clamping holder SRGCL 2020 is a left‑hand turning holder engineered for use with RCMT 10T3 indexable inserts, combining secure insert retention with predictable chip flow in medium‑duty turning operations. SRGCL 2020 for RCMT 10T3 inserts Left‑hand configuration, 30° lead angle 20 × 20 mm shank, 25 mm cutting head width 125 mm overall length, 0.41 kg mass Reliable clamping for consistent machining results The SRGCL 2020 is designed as a robust toolholder that prioritises secure insert retention and repeatability. The SRGC clamping style keeps the insert firmly seated, reducing micro‑movement under load and lowering the risk of chatter. With a 20 × 20 mm shank and an overall length of 125 mm, the holder balances rigidity and accessibility at the turret. These dimensions make it suitable for general turning operations where tool overhang must be minimised to preserve surface finish and extend insert life. The proven compatibility with RCMT 10T3 inserts ensures straightforward toolset standardisation across batches and reduces setup complexity. Geometry tailored for predictable cutting and chip control A left‑hand orientation combined with a 30° lead angle gives this holder definite cutting characteristics: it encourages controlled cut entry and directs chips away from the workpiece, which is particularly useful in batch turning where cycle stability matters. The 25 mm cutting head width and 25 mm cutting height are optimised to match RCMT geometry so that insert seating and edge projection produce consistent cutting engagement. For operators, this translates into fewer interruptions for tool checks and more dependable cycle times — a rational benefit that improves throughput and reduces scrap rates. Workshop integration and handling benefits Handling and mounting are simplified by the standard ISO designation SRGCL 2020 and the K10 shank style reference. At 0.41 kg, the holder is compact enough for fast turret indexing yet heavy enough to contribute to damping. The left‑hand configuration should be specified at the point of order to ensure turret compatibility. From a shopfloor perspective, the holder supports straightforward insert swaps and predictable tool offsets, which helps maintain setup consistency across operators and shifts. This practical approach supports efficient production planning and reduces machine downtime. Why this choice supports quality and availability Selecting this SRGC‑style holder aligns with a pragmatic production strategy: match the holder to RCMT 10T3 inserts already in use, standardise on the ISO SRGCL 2020 designation, and benefit from a compact, left‑hand geometry that improves chip evacuation. The result is a toolholder that contributes to consistent component quality and easier inventory management. As a trusted distributor, Metav Werkzeuge supplies products that are vetted for the European market and supported by technical advice when required. For workshop integration, request the SRGCL 2020 through Metav Werkzeuge to ensure the correct left‑hand configuration and insert compatibility — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details and availability Technical data Article number: D283TM Manufacturer: Teknik Makina ISO designation: SRGCL 2020 Compatible inserts: RCMT 10T3 Facts Overall length: 125 mm Shank size: 20 × 20 mm Cutting head width: 25 mm Cutting height: 25 mm Holder height: 20 mm Cutting angle: 30° Weight: 0.41 kg Special features Left‑hand turning configuration K10 shank designation For RCMT 10T3 indexable inserts SRGC clamping mechanism FAQ Which inserts fit this holder? The holder is specified for RCMT 10T3 indexable inserts; the SRGCL 2020 geometry matches that insert form for secure seating and correct edge projection. Is this holder for left or right turning? This unit is a left‑hand configuration with a 30° lead angle, intended for left‑hand turning operations. What shank size and length does it require? The shank is 20 × 20 mm and the overall length is 125 mm, making it suited to turrets that accept square shanks of this size. Can the holder be used for finishing cuts? With its rigid clamping and modest overhang, the holder supports fine finishing passes when combined with the appropriate RCMT 10T3 grades and correct cutting parameters. What are the weight and physical dimensions to consider for turret setup? Weight is 0.41 kg; key dimensions include 20 × 20 mm shank, 25 mm cutting head width and 125 mm overall length, which should be checked against turret clearance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm SRGCL 2020 K12 For RCMT 1204 Indexable Inserts Innenkühlung Linksschneidend 30° - Teknik Makina
Robust clamping and precise 30° cutting geometry combine to deliver reliable chip control and repeatable turning; the compact SRGCL 2020 form factor (125 mm overall length) and compatibility with RCMT 1204 inserts reduce setup complexity and spare-part variety. Order the clamping holder directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. Klemmhalter — SRGC for RCMT Indexable Inserts (left‑hand, 30° cutting angle) by Teknik Makina The SRGC for RCMT Indexable Inserts is a left‑hand clamping holder engineered for secure turning operations with RCMT 1204 inserts and a 30° cutting geometry, suitable for workshop and production turning. Left‑hand orientation for turning operations Compatible with RCMT 1204 inserts 30° cutting angle for controlled chip formation Compact SRGCL 2020 form, 125 mm overall length Reliable clamping for consistent turning results A firm clamp interface and the designated geometry yield repeatable tool positioning and reduced vibration during operation. The left‑hand orientation combined with the 30° cutting angle supports predictable chip flow and improved surface finish in interrupted and continuous cuts. Compatibility with standard RCMT triangular inserts simplifies tooling logistics and helps maintain cycle times, while the solid construction contributes to dimensional stability across batch runs. Compact form for straightforward integration into toolposts The holder follows the SRGCL 2020 profile so it fits many common post designs and keeps overhang low. Key dimensions—125 mm overall length, 25 mm head width and 20 mm holder height—balance reach and rigidity, and the modest mass of 0.422 kg minimises inertia without compromising stability. The shank/interface reference K12 denotes the connection used for mounting and helps planners match the holder to existing tool systems with little rework. Productivity gains through reduced setup and clear compatibility Designed for practicality, this clamping holder accepts the widely used RCMT 1204 inserts, which lowers inventory diversity and speeds changeovers. The left‑hand configuration means fewer operations require orientation changes, conserving machine time and simplifying programming. For operations seeking a compact, dependable solution for finishing and general turning, the holder’s geometry and SRGCL 2020 form offer a pragmatic combination of rigidity and accessibility that supports higher throughput and consistent component quality. For tailored compatibility checks and to secure supply of Teknik Cutting Tools SRGCL 2020 left‑hand clamping holders, contact Metav Werkzeuge in Emmerich for expert advice and dependable delivery Technical data SKU: D281TM Designation: Klemmhalter — SRGC for RCMT Indexable Inserts ISO designation: SRGCL 2020 Manufacturer: Teknik Makina Facts Overall length: 125 mm Holder height: 20 mm Head width: 25 mm Cutting height: 25 mm Weight: 0.422 kg Cutting angle: 30° Cutting direction: left Materials & compatibility Compatible with RCMT 1204 indexable inserts Shank / mounting interface: K12 Designed for turning operations with left‑hand orientation FAQ Which inserts fit this clamping holder? The clamping holder is specified for RCMT 1204 indexable inserts; the geometry and clamp position are matched to that insert form for secure seating and reliable repeatability. Is this holder suitable for right‑hand turning? This version is produced for left‑hand cutting; for right‑hand applications select the corresponding orientation or a right‑hand variant. What are the key mounting dimensions to check? Check the 125 mm overall length, 25 mm head width and the K12 shank interface when matching the holder to existing toolposts or adaptors. How does the 30° cutting angle affect machining? A 30° cutting angle optimises chip evacuation and cutting forces for many turning tasks, helping to improve surface finish and extend insert life under typical feed and depth conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
250mm Precision Toolholder DSSNR 4040 S25 For SNMG 2508 Inserts Right-Hand Cutting Innenkühlung 45° - Teknik Makina
Take advantage of a robust combination of ISO DSSNR 4040 format, S25 shank stability and a 45° cutting angle for consistent turning results; order directly via Metav Werkzeuge or contact our consultants for specification support. Klemmhalter DSSNR 4040 – DSSNR toolholder for SNMG indexable inserts, 45° cutting angle (Teknik Makina) A Klemmhalter DSSNR 4040 engineered as a right-hand toolholder for SNMG 2508 indexable inserts, optimised for stable external turning and facing tasks in CNC and turret lathes. DSSNR 4040 format, 45° cutting angle Compatible with SNMG 2508 inserts Robust S25 shank, 250 mm overall length 40 mm head width, 60 mm cutting height Improved cycle times through defined cutting geometry The holder’s 45° cutting angle and dedicated compatibility with SNMG 2508 indexable inserts deliver a controlled chip flow and predictable cutting forces, which together reduce cycle-to-cycle variation. In practice, this geometry supports higher feed rates under stable cutting conditions, enabling measurable productivity gains on serial turning operations. The specification for right-hand cutting ensures correct orientation in standard turret setups and eliminates ambiguity when programming tool offsets. Performance advantages are therefore tangible: improved surface finish and extended insert life derive from the combination of angle, insert seat accuracy and robust clamping. Stiffness and repeatability from shank to cutting edge Designed around an S25 shank and an overall length of 250 mm, the assembly balances accessibility with torsional rigidity. The ISO DSSNR 4040 designation guarantees standardised indexing and mounting interfaces, making the holder immediately compatible with many turret systems and changeover procedures. The holder’s measured weight of 3.012 kg and its 40 mm head width contribute to damping of vibration in interrupted cuts, resulting in consistent dimensional results. Where tight tolerances are required, the mechanical clamping layout and precise insert pocket reduce setup time and maintain repeatability across batches. Practical handling and workshop integration The toolholder accepts the widely used SNMG 2508 inserts, which simplifies inventory and reduces the variety of cutting grades in stock. The 60 mm cutting height provides a comfortable overlap with standard toolpost heights in many machines, minimising additional setup shimming. Clamping is performed with a secure screw interface compatible with the holder’s geometry, allowing swift insert replacement and straightforward inspection routines. For shops seeking a straightforward upgrade path, the holder integrates with common toolholders and requires no special adapters beyond the specified shank interface. Reliability and maintenance advantages Materials and manufacturing tolerances focus on longevity and serviceability: the ISO-compliant seating and robust shank reduce the risk of chattering and wear-induced runout. Regular inspection of the clamping screw and insert seat is recommended to maintain the initial accuracy; routine checks will preserve the holder’s performance and extend component life. The product’s construction supports a maintenance-first approach that keeps machines productive and reduces unexpected downtime, aligning with lean manufacturing objectives. For specification advice or to secure this Teknik Cutting Tools DSSNR holder for SNMG 2508 inserts, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss integration and availability. Technical data Article number: D208TM Manufacturer: Teknik Makina Designation: Klemmhalter DSSNR for SNMG indexable inserts ISO designation: DSSNR 4040 Facts Overall length: 250 mm Shank type: S25 Holder width: 50 mm Head width: 40 mm Cutting head width: 40 mm Cutting height: 60 mm Weight: 3.012 kg Cutting angle: 45° Cutting direction: right Special features Compatible with SNMG 2508 indexable inserts Right-hand turning toolholder ISO-compliant insert pocket Robust clamping interface for stable cutting Suitable for turret and CNC lathe installations FAQ Which inserts fit this holder? The Klemmhalter DSSNR 4040 is designed for SNMG 2508 indexable inserts and seats them in an ISO-compliant pocket for reliable seating and repeatable cutting geometry. Is the holder suitable for standard turret turrets? Yes, the S25 shank and the ISO DSSNR 4040 format make the holder compatible with common turret and toolpost systems used in industrial lathes. What is the cutting direction and angle? This toolholder is specified for right-hand cutting with a 45° cutting angle, offering controlled chip formation and improved surface finish in typical turning applications. How does the holder affect insert life? By providing a stable clamping interface and precise seat alignment, the holder helps to reduce insert wear and can contribute to longer effective tool life under comparable cutting conditions. What is the overall length and how does it influence stiffness? The 250 mm overall length balances reach and rigidity; shorter setups will increase stiffness, while the specified length allows access to workpiece features without excessive deflection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25x25 Klemmhalter For ER Indexable Inserts With Coolant, For 16 ER, Innenkühlung - Teknik Makina
Take advantage of secure, coolant-fed clamping and standardised mounting components for reliable machining and reduced setup time; order the clamp holder directly via Metav Werkzeuge or consult the sales team for application advice. Clamp holder AP604TM — Toolholder with internal coolant for 16 ER indexable inserts (Teknik Makina) Clamp holder AP604TM is designed for turning and milling operations where controlled coolant delivery and consistent insert clamping are required Clamp holder for 16 ER indexable inserts Integrated internal coolant for chip evacuation Standard Torx fixing M3.5x11 and T15 key Compact 25 x 25 mm body with 150 mm overall length Consistent clamping and coolant management for longer tool life The AP604TM provides secure clamping for 16 ER indexable inserts while integrating a central internal coolant channel to channel lubricant directly to the cutting edge. This combination reduces flank wear and thermal shock, which leads to longer tool life and fewer unplanned changeovers. The unit accepts the standard U-plate TA061 and shim TA060, and is fastened with the supplied M3.5x11 Torx screw using a T15 key, enabling consistent torque and repeatable seating for every insert change. Compact design and straightforward installation to speed setup With a compact 25 x 25 mm cross-section and an overall length of 150 mm, the holder fits common turret and toolpost arrangements while keeping the cutting point stable. The reduced profile helps to minimise overhang and vibration, improving surface finish and dimensional repeatability. The modular interface with the TA061 mounting plate simplifies tool assembly and replacement, lowering setup time and supporting higher machine utilisation in both small-batch and continuous production environments. Measurable process benefits for production reliability Built for workshop and light industrial use, the holder supports process stability through defined mechanical fixation and direct coolant feed, which together cut tool-change frequency and scrap risk. The design translates into tangible efficiency gains: reduced downtime, more predictable cycle times and improved first-pass quality. Supplied components conform to industry conventions, ensuring that retrofitting or spares procurement remains straightforward for maintenance teams and tooling managers. For application-specific advice or to source the Teknik Makina clamp holder with Metav Werkzeuge as supplier, contact Metav Werkzeuge for tailored recommendations and availability. Technical Data Article number: AP604TM Brand: Teknik Makina Type: Clamp holder for ER indexable inserts SKU: AP604TM Facts Overall length: 150 mm Body dimensions: 25 x 25 mm Suitable for: 16 ER inserts Special features Internal coolant channel Torx screw: M3,5x11 Torx key: T15 U-plate: TA061 Shim/pass plate: TA060 Designed for ER indexable inserts FAQ What insert type does the holder accept? The clamp holder accepts 16 ER indexable inserts and is configured to clamp them securely while providing an internal coolant feed. Is coolant delivery integrated in the design? Yes, the toolholder features an internal coolant channel that directs fluid to the cutting zone to aid chip control and cooling. Which fastening components are specified for assembly? Assembly uses a Torx screw M3.5x11 tightened with a T15 key and mounts to the TA061 U-plate with the TA060 shim for correct positioning. Can this holder be used in compact turrets or small toolposts? The compact 25 x 25 mm body and 150 mm overall length make it suitable for many turret and toolpost arrangements where reduced overhang is preferred. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm CKJNL 3232 P16 For KNUX 1604 Indexable Inserts Innenkühlung Linksschneidend - Teknik Makina
Benefit from the combination of robust 32×32 mm cross-section, secure M6 locking and proven compatibility with KNUX 1604 indexable inserts for steady turning operations; order the tool through Metav Werkzeuge or consult the technical team for application advice. Clamp holder CKJNL 3232 — CKJN clamp holder for KNUX 1604 indexable inserts, 32×32 mm, left-hand (Teknik Makina) Clamp holder CKJNL 3232 is a left-hand turning tool holder engineered for secure clamping of KNUX 1604 indexable inserts, offering a compact footprint and workshop-ready fixation for medium-duty lathe operations Solid 32×32 mm body for stable clamping Compatible with KNUX 1604 indexable inserts Left-hand orientation, 93° cutting angle M6 locking screw and M3x10 seat plate screw Stable clamping for consistent machining quality The CKJNL 3232 is built around a 32×32 mm cross-section that gives the toolholder a rigid foundation; this rigidity reduces vibration and improves repeatability during turning cycles. The 40 mm cutting-head width provides a predictable contact area for the insert, which helps to maintain surface finish without frequent rework. For workshops seeking reliable results from batch production, the engineering focus on structural stability translates directly into fewer rejected parts and less downtime. Quick insert changes and secure fixation Designed for standard indexable inserts, the holder accepts KNUX 1604 plates and secures them with a proven clamping layout. The M6 locking screw provides primary retention while the M3x10 seat plate screw ensures correct seating of the insert plate; together these fastenings offer a secure interface that resists loosening under cutting forces. The integrated clamping wedge BK028 and compatibility with the TA046 seat plate make insert replacement straightforward, minimising changeover times and enabling efficient shop-floor workflows. Optimised geometry for left-hand turning operations The toolholder’s left-hand orientation and 93° cutting angle are chosen to deliver stable chip flow and predictable tool engagement for common external turning tasks. A cutting height of 35 mm ensures the insert sits at an appropriate elevation relative to the toolpost, reducing the need for frequent toolpost adjustments. The defined geometry helps machinists achieve repeatable cutting conditions without complex set-ups, which is particularly useful when switching between similar batches or replicating established machining programmes. Compact handling and workshop readiness With an overall length of 170 mm and a mass of 1.31 kg, the holder is compact enough to fit into tight turret stations while remaining heavy enough to dampen minor oscillations. The bar designation P16 and supplied fitments are aligned with common lathe interfaces, and the inclusion of 3 Allen keys as part of the kit simplifies initial installation. The combination of manageable size and straightforward assembly supports quick tool changes on busy benches and reduces the risk of assembly errors during shift handovers. Contact Metav Werkzeuge for tailored tooling advice and fast supply from Emmerich — Teknik Cutting Tools products such as the CKJNL 3232 are stocked and supported directly by Metav Werkzeuge; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: RD032TM Manufacturer: Teknik Makina ISO designation: CKJNL 3232 Dimensions & weight Width: 32 mm Height: 32 mm Cutting-head width: 40 mm Cutting height: 35 mm Overall length: 170 mm Overall height: 32 mm Weight: 1.31 kg Cutting angle: 93° Compatibility & features For indexable inserts: KNUX 1604 Bar/shank designation: P16 Locking screw: M6 Seat plate screw: M3x10 Clamping wedge: BK028 Seat plate: TA046 Included tools: 3 Allen keys Orientation: left-hand FAQ Which inserts fit this holder? The holder is designed for KNUX 1604 indexable inserts; CKJNL 3232 compatibility ensures correct seating and clamping for typical KNUX plates. Is the tool suitable for right-hand turning? This item is a left-hand orientation holder; for right-hand turning a corresponding right-hand version should be selected. What fastening hardware is required? The toolholder uses an M6 locking screw and an M3x10 seat plate screw as primary fastenings, with the clamping wedge BK028 securing the insert. Can this holder be mounted on standard turrets? The CKJNL 3232 uses a P16 bar designation and compact 170 mm length, making it suitable for common turret and toolpost arrangements that accept P16-style bars. Are the necessary keys included? The delivery includes 3 Allen keys for assembly and insert changes, enabling immediate workshop fitting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Clamping Holder AL 3232 P16- ER16 for 16 ER Inserts Innenkühlung Right-Handed - Teknik Makina
Take advantage of a compact, industry-ready solution that combines a 32 mm cutting head, compatibility with 16 ER indexable inserts and a robust 170 mm overall length to streamline external-thread turning operations. Order the clamp holder directly via Metav Werkzeuge or consult the Metav team for application-specific advice. Clamp holder D262TM — Right-hand toolholder with 32 mm cutting head for external threading (Teknik Makina) A clamp holder optimised for external-thread turning, designed to accept 16 ER indexable inserts and to integrate with P16‑ER16 toolposts for stable, repeatable machining. Right-hand cutting direction Compatible with 16 ER inserts 32 mm cutting head width Overall length 170 mm Stable clamping for consistent external-thread results The design places emphasis on secure insert retention and repeatability: the holder accepts 16 ER indexable inserts and is specified with an ISO designation of AL 3232, which supports a consistent tool geometry. This means setups remain stable across production runs, reducing variation in thread profile and minimising rework. The combination of a defined cutting head width (32 mm) and a cutting height of 30 mm provides a predictable reference for programming and inspection, so cycle times and machining strategy can be planned with confidence. Efficient integration and faster changeovers on the shop floor Compatibility with a P16‑ER16 clamping interface and a conventional right-hand cutting direction simplifies integration into existing tool chains. The 170 mm overall length balances reach and rigidity, allowing the holder to be used where access and clearance are limited without compromising stability. These features translate into practical time savings during tool changes and setups, supporting an efficient workflow and reduced machine downtime when switching between external-thread operations. Practical benefits for production and maintenance planning Weighing 1.436 kg and featuring standardised connections, the holder is suitable for repetitive external-thread tasks in general workshop and industrial environments. The clear specification of dimensions and ISO designation aids procurement and inventory management, while the standard insert compatibility reduces the need for specialised consumables. For planners and purchasing teams this means simpler stocking, predictable life-cycle costs and fewer interruptions in serial production. Contact Metav Werkzeuge for an application check or to request the technical drawing; Metav Werkzeuge is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: D262TM Manufacturer: Teknik Makina Designation: Klemmhalter Secondary designation: for outside thread eClass: 21181004 Facts Overall length: 170 mm Cutting head width: 32 mm Holder width: 32 mm Holder height: 32 mm Cutting height: 30 mm Weight: 1.436 kg Special features Compatible with 16 ER indexable inserts ISO designation: AL 3232 Toolpost/shank interface: P16‑ER16 Cutting direction: right-hand FAQ Which insert type fits the holder? The clamp holder accepts 16 ER indexable inserts; this compatibility is specified to work with standard ER‑style threading inserts. Is the holder suitable for external threading operations? Yes. The D262TM clamp holder is specified for external-thread turning and is labelled as suitable for external thread applications. What is the overall length and mass of the toolholder? The holder has an overall length of 170 mm and a weight of 1.436 kg, which balances reach and rigidity for typical workshop tasks. What is the ISO designation and why does it matter? The ISO designation AL 3232 provides a standard reference for geometry and mounting, aiding repeatable setup and compatibility across tool systems. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Klemmhalter 93° SVJCR 3232 P16 for VCMT 1604 Indexable Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Benefit from a robust turning solution that combines secure clamping, compatibility with VCMT inserts and a compact footprint for reliable workshop performance — order the Klemmhalter SVJC for VCMT Indexable Inserts directly via Metav Werkzeuge or consult our specialists for tailored advice. Klemmhalter SVJC for VCMT Indexable Inserts — Right-hand holder, ISO SVJCR 3232 (Teknik Makina) A Klemmhalter SVJC for VCMT Indexable Inserts engineered for right-hand turning operations, offering rigid clamping and precise insert seating for VCMT 1604 inserts. Compatible with VCMT 1604 indexable inserts Right-hand cutting direction for standard turning ISO designation SVJCR 3232 for consistent fitting Robust 32 mm clamp height for stable cutting Engineered for predictable turning performance The holder is built to deliver stable cutting and repeatable results in routine turning work. The ISO SVJCR 3232 designation ensures a standardised fit with tool posts and tool holders, while the 32 mm clamp height provides a solid seating that reduces vibration and helps maintain surface finish. With a right-hand configuration, this toolholder is suited to conventional lathe set-ups where consistent chip control and predictable toolpath behaviour contribute directly to process reliability. Simple compatibility reduces set-up time Designed specifically for VCMT 1604 indexable inserts, the clamping geometry secures the insert reliably and simplifies index changes. The holder accepts the insert form and locates it accurately against the seat, which minimises regrinding or adjustment time between operations. The P16 designation for the shank interface aligns with common toolpost interfaces, and the tool’s 93° cutting angle offers a balance between strength and accessibility at the cut edge, reducing downtime and streamlining changeovers. Practical dimensions that suit everyday workshop demands Compact but robust, the holder’s 170 mm overall length and 40 mm cutting head width offer good reach without excess overhang, while the 32 mm holder width aids rigidity in confined set-ups. A 50 mm cutting height and a mass of 1.284 kg mean the component is substantial enough to resist deflection yet light enough for straightforward handling during mounting. These dimensional characteristics support efficient toolpaths and predictable machining forces, helping to extend insert life and maintain consistent part quality. For tailored technical advice or to secure the SVJC holder from Teknik Cutting Tools, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our advisers will assist with application-specific recommendations and order processing Technical Data SKU: D249TM Manufacturer: Teknik Makina ISO designation: SVJCR 3232 Compatible inserts: VCMT 1604 Cutting direction: right Clamp height: 32 mm Cutting head width: 40 mm Holder width: 32 mm Overall length: 170 mm Cutting height: 50 mm Weight: 1.284 kg Cutting angle: 93° Right-hand turning configuration For SVJC style holders for VCMT indexable inserts Shank designation: P16 FAQ What inserts fit this holder? The holder is made for VCMT 1604 indexable inserts; compatibility is ensured by the SVJCR 3232 ISO seating used in the design. Is the holder left- or right-hand? This toolholder is configured for right-hand cutting direction and is therefore intended for standard right-hand turning operations. Does the holder require a special shank or interface? The clamping holder uses the P16 shank designation and the ISO SVJCR form, compatible with common toolpost interfaces that accept this standard. How do the dimensions affect stability and reach? With a 32 mm clamp height, 40 mm cutting head width and 170 mm overall length, the holder balances reach and rigidity to reduce deflection and support consistent insert life Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Klemmhalter DCLNL 3232 P16 For CN-- 1606 Indexable Inserts Innenkühlung Linksschneidend 95° - Teknik Makina
Take advantage of the combination of precise indexable-insert compatibility, stable left-hand orientation and compact dimensions for reliable turning performance; order the toolholder directly via Metav Werkzeuge or consult the technical advisors for integration guidance. DCLN clamping holder for CN-- indexable inserts (DCLNL 3232) – left-hand turning toolholder by Teknik Makina The DCLN clamping holder is a left-hand turning toolholder engineered for use with CN-- 1606 indexable inserts, offering a compact 170 mm overall length for close-quarter and stable lathe operations. DCLNL 3232 mounting for CN-- 1606 inserts Left-hand cutting orientation for turning Robust 170 mm overall length, 1.407 kg Precision clamping with 95° cutting angle Precision and process stability for left-hand turning The holder is built around the DCLNL 3232 form, delivering a defined tool geometry with a 95° cutting angle that promotes consistent chip formation and predictable cutting forces. This geometry supports stable insert seating and reduces the need for corrective finish passes; the result is improved machining repeatability and shorter cycle-time variance. The controlled geometry is particularly beneficial where left-hand orientation is required for specific spindle or workpiece set-ups, enabling a rational improvement in throughput without speculative claims. Clear specification for set-up and reach Key dimensional values are disclosed to facilitate rapid integration: 170 mm overall length, head width 40 mm, holder height 32 mm, holder width 32 mm and cutting height 36 mm. The component weight of 1.407 kg signals a solid build that helps dampen vibration and maintain cutting line. The tool accepts CN-- 1606 indexable inserts and is compatible with shank designation P16, making it suitable for a wide range of standard turning fixtures. These measurable characteristics allow accurate tool-offset programming and dependable fixturing in production planning. Secure clamping and operational benefits Designed as a clamping solution rather than a disposable unit, the item provides a dependable seating for indexable inserts that simplifies repeat installation and inspection. The left-hand orientation and ISO designation support predictable assembly and replacement procedures on the shopfloor, while the mass and form factor contribute to rigidity during cuts. Where changeover speed and predictable tool life are priorities, this holder reduces setup iteration and supports consistent surface finish without introducing speculative performance claims. Contact Metav Werkzeuge today to discuss technical integration of the DCLN left-hand clamping holder or to request specific compatibility details from Metav Werkzeuge in Emmerich. Technical Data SKU: D306TM Manufacturer: Teknik Makina Article designation: DCLN for CN-- Indexable Inserts (DCLNL 3232) Facts Overall length: 170 mm Weight: 1.407 kg Cutting head width: 40 mm Holder height: 32 mm Holder width: 32 mm Cutting height: 36 mm Cutting angle: 95° Cutting direction: left For indexable inserts: CN-- 1606 Shank designation: P16 Special features ISO designation: DCLNL 3232 Left-hand turning orientation Suitable for CN-- 1606 indexable inserts Solid, compact toolholder form factor FAQ Which inserts fit this clamping holder? The holder is specified for CN-- 1606 indexable inserts; the DCLNL 3232 form ensures correct seating and repeatable geometry for those inserts. Is the DCLN clamping holder left-hand or right-hand? This toolholder is a left-hand turning unit, designed for operations where the cutting direction is left-oriented; referenced as SKU D306TM in technical documentation. What are the key dimensions to consider when planning set-up? Important dimensions include 170 mm overall length, head width 40 mm, holder height 32 mm, holder width 32 mm and cutting height 36 mm, all of which determine clearances and offset programming. Can this holder be mounted in standard tool posts? The DCLN clamping holder uses a common form factor with shank designation P16, enabling mounting in fixtures that accept this designation; compatibility depends on the tool post specification. Who manufactures this toolholder and what is the SKU for ordering? The item is supplied by Teknik Makina and listed as SKU D306TM for ordering and inventory reference. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm MTJNR 3232 P22 For TN-- 2204 Indexable Inserts, 93° Right-Hand, Innenkühlung - Teknik Makina
Robust right‑hand clamping performance with ISO MTJNR 3232, a 93° cutting angle and 170 mm overall length for extended reach; combine stability, repeatable clamping and compatibility with TN-- 2204 inserts. Order the Klemmhalter directly via Metav Werkzeuge or ask our consultants if needed. Klemmhalter MTJN for TN-- Indexable Inserts — Right‑hand turning toolholder, ISO MTJNR 3232 (Teknik Makina) The Klemmhalter is a right‑hand turning toolholder engineered for external turning with TN-- 2204 indexable inserts, offering a compact clamping head and long‑reach shank for stable machining in workshop and light industrial production Right‑hand holder ISO MTJNR 3232 Compatible with TN-- 2204 inserts 170 mm overall length for extended reach P22 shank, 1.348 kg for stable cutting Precision where consistent surface finish is required The holder delivers repeatable clamping and controlled cutting geometry by combining a 93° cutting angle with a compact clamping head. This geometry reduces deflection and improves chip control when using TN-- 2204 indexable inserts, which in turn helps to maintain tolerances and surface finish across serial runs. The ISO MTJNR 3232 designation ensures compatibility with standardised tool stations and makes tool changes predictable and traceable in mixed fleets. Stable construction for lower vibration and predictable tool life Designed with a substantial mass and rigid shank, the toolholder’s 1.348 kg weight and P22 shank contribute to vibration damping and cutting stability. The 170 mm overall length gives extra reach for external turning without sacrificing rigidity, while the 40 mm cutting head width and 32 mm holder height are dimensioned for controlled tool overhang. These mechanical characteristics translate into fewer tool re‑sets, less scrap and more reliable cycle times on the shop floor. Practical benefits for everyday turning operations As a right‑hand toolholder for indexable inserts, this solution suits common external turning tasks where quick index changes and machine uptime are priorities. The holder’s shape and cutting height support effective insert seating and secure clamping, reducing the time needed for adjustment. For operations targeting productivity, the combination of stable geometry and standard ISO compatibility makes integration into existing tool inventories straightforward, supporting efficient setup and less downtime between jobs. For technical clarification or to secure this Teknik Cutting Tools holder from Metav Werkzeuge — with reliable supply from Emmerich and expert advice available — contact Metav Werkzeuge for a customised quotation or specification check. Technical data Article number: D204TM Manufacturer: Teknik Makina Designation: MTJN for TN-- Indexable Inserts (Klemmhalter) Direction: right Overall length: 170 mm Cutting head width: 40 mm Holder width: 32 mm Holder height: 32 mm Cutting height: 40 mm Cutting angle: 93° Weight: 1.348 kg Compatible inserts: TN-- 2204 ISO designation: MTJNR 3232 Shank designation: P22 SKU: D204TM FAQ Which inserts fit this holder? The holder accepts TN-- 2204 indexable inserts; the clamping geometry is designed for secure seating of that insert family in the MTJN pocket. Is this a right‑hand or left‑hand tool? This is a right‑hand turning toolholder, specified for right‑hand cutting operations and listed under ISO MTJNR 3232. What are the key dimensions to check before ordering? Important dimensions include the 170 mm overall length, 40 mm cutting head width, 32 mm holder height and a cutting height of 40 mm; the weight is 1.348 kg. For which applications is this toolholder best suited? The holder is optimised for external turning with TN-- type indexable inserts, providing stability for serial machining and good reach where tool overhang must be limited. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Precision Clamp Holder 95° Cutting Angle DCLNL 3232 P12 For CN-- 1204 Indexable Inserts Left-Hand Internal Cooling - Teknik Makina
Take advantage of the DCLNL 3232 combination of secure clamping and standard ISO compatibility to increase turning stability and simplify tool inventory; order and supply coordination is available through Metav Werkzeuge for reliable delivery and advice. DCLNL 3232 Clamping Toolholder DCLN for CN-- Indexable Inserts, left‑hand A DCLNL 3232 clamping toolholder engineered for left‑hand external turning operations with CN-- 1204 indexable inserts, designed to deliver stable cutting performance and straightforward insert replacement Left‑hand turning orientation Accepts CN-- 1204 indexable inserts Robust 170 mm overall length 32 mm shank height for secure clamping Greater process stability through secure clamping The holder provides secure clamping via a 32 mm shank height and a firm head width, reducing vibration and producing more consistent surface finishes. With an ISO designation of DCLNL 3232, the component aligns with industry standards for indexable turning, allowing predictable seating of CN-- 1204 inserts. The 95° cutting angle positions the insert for controlled material removal, helping to extend insert life and maintain repeatable dimensional results on external turning tasks. Compatibility and practical integration for production layouts Built with a 170 mm overall length and a weight of 1.379 kg, the toolholder integrates easily into lathe setups that require left‑hand orientation. It is designed for use with standard tool posts and references the boring‑bar designation P12, allowing straightforward mounting and interchangeability. The arrangement simplifies stocking and reduces setup time, since the holder accepts commonly used indexable plates and follows the ISO format, which makes changeovers faster under production conditions. Reduced downtime and predictable maintenance routines A predictable clamping concept and clear geometry—including a 30 mm cutting height and 40 mm head width—enable quick insert changes and routine checks without complex adjustments. The robust construction contributes to stable toolholding during heavy cuts, while the standardised design supports routine maintenance practices and inventory control. For workshops aiming for consistent cycle times and workmanship, the holder delivers measurable benefits in uptime and process reliability. For tailored supply and technical advice on the DCLNL 3232 clamping toolholder from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for delivery and compatibility guidance. Technical data Article number: D305TM Name: DCLN for CN-- Indexable Inserts Manufacturer: Teknik Makina ISO designation: DCLNL 3232 Cutting direction: Left Compatible inserts: CN-- 1204 Numerical data Overall length: 170 mm Shank height: 32 mm Head width: 40 mm Shank width: 32 mm Cutting height: 30 mm Cutting angle: 95° Weight: 1.379 kg ECLASS: 21181004 Features & compatibility Boring bar designation: P12 For CN-- 1204 indexable inserts Files: 62de7ed7148ec6b71020ffb4, 62de7e390f56dbb4de4dbef9 Left‑hand orientation for specific turning setups FAQ What inserts fit this toolholder? The holder is specified for CN-- 1204 indexable inserts and seats them in the ISO DCLNL 3232 arrangement to ensure correct positioning and secure clamping. Is the holder suitable for right‑hand turning? This toolholder is configured for left‑hand cutting direction; use the corresponding right‑hand version for right‑hand operations. What are the key dimensions to check for machine compatibility? Important dimensions include a 32 mm shank height, 170 mm overall length, 40 mm head width, and a 30 mm cutting height—these determine clearance and mounting on the tool post. How does the 95° cutting angle affect turning? The 95° cutting angle offers a geometry that balances effective material removal with stable insert support, improving surface finish and tool life in external turning tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm DCLNL 4040 DCLN For CN-- Indexable Inserts, 95° Cut Angle, S19, For CN-- 1906 Inserts, Innenkühlung, Left-Hand Cutting - Teknik Makina
Take advantage of a rigid clamping solution combined with precise 95° cut geometry and compatibility with CN--1906 indexable inserts for dependable turning performance; order the holder via Metav Werkzeuge or request application advice from the technical team. Klemmhalter D307-2TM — DCLN toolholder for CN-- indexable inserts, left-hand, 95° The Klemmhalter D307-2TM is a left-hand DCLN toolholder engineered for metalturning applications with CN--1906 indexable inserts and a robust 95° cutting geometry. Left-hand orientation for turning tasks Compatible with CN--1906 inserts Robust 40 mm head and shank dimensions 95° cutting angle for stable cuts Stable clamping for consistent turning results A rigid clamping arrangement is central to repeatable machining, and this toolholder provides a stable interface between machine and insert. With a head and shank width of 40 mm and a cutting height of 40 mm, the design reduces vibration and supports steady chip formation; the mass of 3.195 kg contributes to dampening during heavy cuts. Reduced chatter improves surface finish and extends the life of both the insert and the holder, so cycle times remain predictable and tool-change intervals become easier to plan. The solid geometry is particularly beneficial where dimensional consistency across batches is required. Precision compatibility that simplifies tooling choices Designed for DCLN-style holders and to accept CN--1906 indexable inserts, the product—identified under DCLNL 4040—matches common industry insert grades and shapes. The 95° cutting angle is optimised for conventional turning operations, offering a balance between approach angle and clearance that helps maintain stable cutting forces. The left-hand orientation suits applications where the tool must cut counter to right-hand holders; this is indicated as left-hand in the specification and should be selected where the process or machine setup demands it. The shank designation S19 clarifies the holder interface for fixture planning and compatibility checks. Practical dimensions and workshop integration With an overall length of 250 mm, the holder fits standard turret and toolpost arrangements while keeping the centre of cutting action accessible for inspection and measurement. The consistent 40 mm shank and head dimensions simplify fixture planning and stock management, as like-for-like holders reduce the variety of spares required. The compatibility with established indexable inserts means inserts can be stocked across multiple holders, lowering logistical overhead. Clear, measurable specifications support rapid selection in engineering documentation and facilitate process validation in production environments. Contact Metav Werkzeuge for application guidance and to source the Teknik Cutting Tools DCLNL 4040 toolholder (SKU D307-2TM); email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D307-2TM Manufacturer: Teknik Makina ISO designation: DCLNL 4040 Core data Overall length: 250 mm Head height: 40 mm Head width: 40 mm Shank width: 40 mm Cutting height: 40 mm Weight: 3.195 kg Cutting angle: 95° Direction: left Special features Compatible inserts: CN--1906 Insert family: DCLN for CN-- indexable inserts Shank designation: S19 SKU: D307-2TM FAQ What insert type fits this holder? The holder accepts CN--1906 indexable inserts; the designation DCLN indicates compatibility with this insert family for standard turning tasks. Is the holder suitable for right-hand turning? The D307-2TM is specified as left-hand; for right-hand operations a mirror-design holder should be chosen. What does the 95° cutting angle mean for machining? A 95° cutting angle provides a robust approach angle that balances cutting force direction and insert clearance, which supports stable chip control and consistent surface finish. How do the holder dimensions affect turret setup? Consistent 40 mm head and shank widths simplify turret planning and reduce the need for multiple adapter sizes, aiding quicker setup and repeatable positioning. Can this holder be used across different insert grades? Compatibility is with the CN--1906 form; different grades (coatings or substrate) of the same insert geometry can be used for varied materials or cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Clamping Holder 12x12mm Cutting Head 16mm, Torx T15 M3.5x11 - Teknik Makina
Combining compact dimensions with an ISO-compatible interface and secure Torx fixation, the clamp holder provides precise, repeatable clamping for compact tool assemblies; order the part directly via Metav Werkzeuge or consult the specialists for application guidance. Clamp holder L80mm — compact clamp holder, 80 mm length, ISO 1212 (Teknik Makina) A clamp holder engineered for secure insert clamping in compact turning and milling tool assemblies. Compact 80 mm length for tight setups ISO 1212-compatible clamping interface 16 mm cutter head width for versatile use Secure Torx T15 fixation with M3.5x11 screw Space‑saving design that keeps rigidity high The short overall length of 80 mm and reduced clamping footprint deliver a tangible benefit for constrained setups: minimal overhang and reduced vibration risk. With a clamping width of 12 mm and a height of 12 mm, the design maintains core stiffness while permitting closer proximity to the workpiece. For operations where tool interference must be avoided, the compact form factor supports more stable cutting conditions and improved surface finishes, leading to fewer reworks and steadier cycle times. Secure fixation for dependable tool retention and faster swaps A robust fastening concept ensures the insert remains fixed under load: the use of Torx T15 engagement together with an M3.5x11 screw provides higher torque transfer and lower cam‑out compared with conventional designs. The result is a reliable clamp that preserves insert position even during interrupted cuts. Faster and more predictable screw handling reduces machine downtime for tool changes and simplifies maintenance routines in busy production environments. Standardised interface to reduce setup complexity The holder is specified for ISO 1212, offering compatibility with a wide range of indexable insert systems and cutter heads. The 16 mm cutter head width and 20 mm cutting height are matched to common insert geometries, minimising the need for additional adapters and alignment steps. Standard interfaces translate directly into shorter fixture setup and consistent repeatability when replacing tools across multiple machines or shifts. Predictable performance for continuous workshop operation Designed for reliable use in industrial settings, this toolholder emphasises repeatability and supply continuity. The model D499TM from Teknik Makina integrates straightforward mechanical design with serviceable fixings to keep production moving. Clear specification and compatibility make inventory planning easier, and the compact form reduces the requirement for costly special tooling—helping workshops maintain throughput without sacrificing measurement certainty or process stability. For secure, space‑saving clamping solutions request the Teknik Makina clamp holder D499TM from Metav Werkzeuge or contact the consultants for tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: D499TM Label: Klemmhalter L80mm Manufacturer: Teknik Makina ISO designation: 1212 Facts Overall length: 80 mm Clamping width: 12 mm Height: 12 mm Cutter head width: 16 mm Cutting height: 20 mm Special features Torx key: T15 Torx screw: M3.5x11 Product type: Clamp holder ECLASS: 21181004 FAQ What is the intended application of this clamp holder? The clamp holder L80mm (D499TM) is intended for compact turning and milling tool assemblies where a short overhang and precise insert positioning are required. Is the holder compatible with standard indexable inserts? Yes, compatibility with ISO 1212 ensures the holder works with commonly used indexable insert systems that match the specified cutter head geometry. Which fastening tool is required for the screw? A Torx T15 driver is recommended for the provided M3.5x11 screw to ensure correct torque and avoid cam‑out. Can the holder be used for heavy interrupted cuts? The secure Torx fixation and compact geometry of the D499TM support stable clamping under typical interrupted cutting conditions, improving retention compared with non‑Torx fastenings. How does the compact length benefit workshop workflows? The 80 mm length reduces tool overhang, lowering vibration and enabling closer tool placement; this contributes to better surface finish and reduced setup complexity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
93° SVJBL 1010 SVJB Holder for VBMT 1103 Indexable Inserts, Interior Cooling, Left-Hand Cutting, J11-IK - Teknik Makina
Take advantage of a compact, precision toolholder that combines secure clamping, internal coolant and a space-saving head for improved access in confined turning operations. Rely on Teknik Cutting Tools’ robust design for consistent surface finish and reduced setup time — order through Metav Werkzeuge or speak to a consultant for tailored guidance. SVJBL 1010 Clamping Holder — SVJB for VBMT Indexable Inserts, left-hand with internal coolant (Teknik Makina) The SVJBL 1010 is a left-hand clamping holder engineered for turning applications with VBMT 1103 indexable inserts, offering internal coolant routing and a compact head for tight bores and interrupted cuts. Left-hand orientation for internal turning Internal coolant for improved chip evacuation Secure clamping for VBMT 1103 inserts Compact head: 12 mm width Precision clamping that stabilises tool life and finish The holder delivers consistent clamping force through a proven wedge design that secures VBMT 1103 inserts, reducing micro‑movement during engagement. This precision clamping reduces chatter and extends insert life, which translates into fewer interruptions for regrinding or replacement. For operations where repeatable geometry is vital, this toolholder offers a straightforward, measurable improvement in component consistency and cycle‑time reliability. Integrated coolant to support high-quality chip control Built‑in internal coolant directs cutting fluid close to the cutting edge, improving chip evacuation and cooling the insert pocket. For materials prone to long, stringy chips or thermal sensitivity, targeted cooling reduces heat build-up and helps maintain cutting edge integrity. The result is more predictable tool wear and a lower risk of built-up edge, both of which benefit process stability and surface quality in medium to heavy turning tasks. Space-saving geometry for access and rigidity A compact head with a 12 mm cutting‑head width and overall length of 110 mm provides better access in restricted bores and multi‑tool turrets. The modest mass (approx. 0.097 kg) minimises centrifugal forces on long overhangs while retaining sufficient stiffness for stable cutting. This geometry is particularly advantageous for workshops aiming to consolidate fixtures and reduce the number of specialised holders required for tight‑radius jobs. Simple assembly and quick service routines Maintenance and insert changes are straightforward: the clamping screw is supplied as M2.5x6.5 and is operated with a T8 Torx key, enabling fast, repeatable re‑clamping without specialised tooling. The ISO designation SVJBL 1010 reflects compatibility and eases inventory management across production lines. Reduced downtime from quick interchange procedures supports leaner workflows and predictable shift handovers. Compatibility and application scope for reliable performance Designed for VBMT 1103 indexable inserts and matched to J11‑IK bore bars, the holder features a cutting angle of 93° and a cutting height of 30 mm, making it suitable for many standard turning tasks where a left‑hand orientation is required. The holder’s 10 mm body width and compact profile suit operations where both reach and rigidity are necessary without compromising tool life or part quality. For reliable left‑hand turning with internal coolant, contact Metav Werkzeuge for product selection advice or to request the Teknik Cutting Tools SVJBL 1010 through our Emmerich distribution; our consultants can confirm suitability for specific applications Technical data Article number: AP550TM Manufacturer: Teknik Makina Designation (EN): SVJB for VBMT Indexable Inserts ISO designation: SVJBL 1010 SKU: AP550TM Facts Cutting height: 30 mm Head width: 12 mm Holder width: 10 mm Clamp height: 10 mm Overall length: 110 mm Weight: 0.097 kg Cutting angle: 93° Cutting direction: left Special features Internal coolant supply For VBMT 1103 indexable inserts Torx screw M2.5x6.5 Operated with Torx key T8 Compatible with bore bar J11-IK FAQ Which inserts fit this holder? The holder accepts VBMT 1103 indexable inserts; the clamping geometry is matched to that insert form for secure seating and repeatable cutting. Is the coolant routed to the cutting edge? Yes, the SVJBL 1010 features internal coolant routing designed to deliver fluid close to the insert‑edge for improved chip control. Can this holder be used for right‑hand turning? This version is specified for left‑hand cutting; for right‑hand operations, a corresponding right‑hand holder is recommended. What tools are required for insert changes? Insert retention uses a Torx screw M2.5x6.5, operated with a T8 key, allowing fast and repeatable maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
External Turning Clamping Holder, Heavy-Duty - Teknik Makina
Take advantage of a compact solution for reliable external turning: the clamping holder combines secure workpiece fixation with straightforward integration into existing lathe tool setups. Order the clamping holder directly via Metav Werkzeuge or consult our specialists for application advice. Clamping holder for external turning (RP104TM) by Teknik Makina The Clamping holder is a toolholder intended for external turning applications, designed to provide stable workpiece fixation and consistent machining performance across general metalworking tasks. External turning toolholder Secure workpiece clamping Industrial-grade compatibility Increased process reliability for external turning The RP104TM is conceived to support external turning operations with an emphasis on stable cutting conditions and repeatable results. By ensuring secure clamping of the workpiece, the holder reduces vibration and positional deviation during machining. For production environments this translates into more predictable surface finishes and fewer rework cycles, helping to maintain throughput without compromising component tolerances. Consistent clamping for repeatable outcomes A well-engineered toolholder keeps the cutting edge positioned reliably relative to the workpiece. This item delivers consistent fixation that supports repeatability in serial production and one-off jobs alike. For operators and planners, that means less time spent on re-adjustment and more consistent dimensional accuracy from part to part, which is particularly relevant where tight process control is required. Simple adaptation to standard turning toolstocks Designed for integration with common lathe toolstocks, the holder facilitates straightforward replacement or upgrades within existing setups. The uncomplicated interface allows for quick mounting and secure seating in the tool post, helping to streamline changeovers. As a component intended for routine workshop use, it aids in maintaining efficient machine utilisation throughout varied job cycles. Practical suitability for general metalworking While compact in concept, the clamping holder suits a broad range of turning tasks across typical metalworking materials. It is particularly useful in applications where a robust, stable clamping solution is needed to withstand normal cutting forces during external turning. The design focus remains on dependable workholding rather than on material-specific processes, so the holder complements versatile workshop needs. Maintenance and service considerations The straightforward construction favours ease of inspection and upkeep, allowing maintenance staff to verify clamping integrity with minimal downtime. Regular checks of fastening interfaces and seating surfaces will preserve performance and extend service intervals. Where replacement parts are required, sourcing through established suppliers ensures continuity of operation. Who benefits from this toolholder The clamping holder is well suited to machine shops, production lines and maintenance departments seeking a reliable, no-frills workholding option for external turning. Engineers specifying toolholders for standard turning processes will value the holder’s contribution to process stability and consistent part quality without the need for bespoke solutions. Contact Metav Werkzeuge for detailed application advice and to source the Teknik Makina RP104TM clamping holder for reliable external turning performance in your workshop Technical data Article number: RP104TM Product: Clamping holder Type: External turning Brand: Teknik Makina eClass: 21181004 Facts eClass: 21181004 Versions / Special features Application: External turning Category: Clamping holder Label: Klemmhalter Manufacturer: Teknik Makina FAQ What is the primary application of this clamping holder? The clamping holder is intended for external turning operations and provides fixed workpiece support during lathe machining. Which brand manufactures this toolholder and what is the SKU? The holder is supplied by Teknik Makina and is listed under the SKU RP104TM. Can this holder be integrated into existing lathe toolposts? The holder is designed for straightforward integration with standard turning toolstocks to facilitate quick mounting and secure seating. How does this toolholder affect machining consistency? By maintaining secure workpiece fixation, the holder contributes to reduced vibration and improved repeatability in external turning processes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
External Turning Clamping Holder, Solid Tool Steel - Teknik Makina
Benefit from a sturdy clamping solution optimised for external turning: secure tool retention and consistent process stability ensure smoother production cycles. Order the clamping holder directly via Metav Werkzeuge or consult the technical team for integration advice. Klemmhalter — External turning clamping holder by Teknik Makina The Klemmhalter is a precision clamping holder intended for stable tool retention in external turning operations, suitable for professional workshop and industrial lathe applications. Precision clamping holder for external turning Robust construction by Teknik Makina Identified by SKU RP102TM Reliable clamping for consistent turning results A stable clamping system is fundamental for repeatable machining outcomes. The Klemmhalter delivers controlled tool retention that reduces micro-movements during cutting, which in turn supports a steady surface finish and fewer process interruptions. By securing the cutting insert reliably, the holder contributes to improved cycle-time stability and predictable part quality, aligning with the rational need for efficient, reproducible production. Streamlined handling that fits workshop routines Designed for pragmatic workshop use, the RP102TM toolholder keeps changeover and set-up straightforward, helping to reduce non-productive time. The holder’s design emphasises fast, repeatable seating of the cutting edge and reliable mechanical clamping, which supports steady tool life and lowers the incidence of unplanned adjustments. For production planners, this translates into smoother operation sequencing and easier integration into existing turning stations. Proven supply chain and service continuity for peace of mind Manufactured by Teknik Makina and distributed through Metav Werkzeuge, this clamping holder is backed by a supplier network focused on dependable delivery and technical backing. Metav’s role as a European distribution centre acts as a quality filter for workshop purchases, combining experienced product selection with transparent order handling. The result is a trustworthy procurement route that supports long-term workshop reliability and operational continuity. For specification guidance or procurement of the Teknik Makina RP102TM clamping holder, contact Metav Werkzeuge for tailored advice and swift supply arrangements at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: RP102TM Product type: Klemmhalter Eclass: 21181004 Manufacturer: Teknik Makina UID: RP102TM Facts Classification code: 21181004 SKU identifier: RP102TM Special features Application: External turning Category path: Zerspanen › Klemmhalter Brand: Teknik Makina FAQ What is the primary application for this holder? The clamping holder is designed for external turning operations; the RP102TM supports secure tool retention during lathe-based turning processes. Which manufacturer produces this toolholder? Teknik Makina manufactures the clamping holder; the model is supplied and supported through Metav Werkzeuge. How is the RP102TM identified for ordering? Orders and enquiries can reference the SKU RP102TM to ensure the correct clamping holder is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
External Turning Tool Holder RP100TM - Teknik Makina
The clamping holder RP100TM delivers secure clamping for external turning operations and straightforward identification via SKU RP100TM; order the device directly through Metav Werkzeuge or contact our consultants for application advice. Clamping holder RP100TM — External turning clamping holder by Teknik Makina The Clamping holder RP100TM is a compact clamping solution intended for external turning applications in industrial machining, offering reliable tool fixation for turning processes. Clamping holder «RP100TM» by Teknik Makina For external turning operations Designed for secure tool clamping Improved process stability from secure clamping Stable cutting conditions start with reliable tool fixation. The RP100TM is designed as a clamping device for external turning, ensuring consistent engagement between insert and workpiece. By reducing micro-movements at the tool tip, the holder promotes repeatable turning results and more predictable tool life. This rational advantage supports efficient cycle planning and reduces scrap rates in batch production, making the component a practical choice for machine shops focusing on throughput and quality. Easy integration into turning tool chains Integration into existing turning setups is a decisive factor for workshop efficiency. The clamping holder is presented as a straightforward element for external turning tool arrangements and is compatible with standard mounting practices in clamping technology. Its clear identification via SKU RP100TM and the association with Teknik Makina simplify procurement and tool-room inventory management. This functional clarity reduces administrative friction and helps maintain production continuity across shifts. Workshop support and supply assurance from Metav Sourcing precision tooling is more than the product itself; supply reliability and expert support matter equally. Metav Werkzeuge acts as a quality filter and distribution hub for the European market, combining broad product availability with targeted advice. With a large product range and an experienced consultant network, Metav enables straightforward procurement and technical clarification, helping workshops maintain uptime and meet delivery commitments with confidence. Contact Metav Werkzeuge for application-specific recommendations on the Teknik Makina RP100TM or request further technical data by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: RP100TM Manufacturer: Teknik Makina Product type: Clamping holder Facts ECLASS: 21181004 Special features Application: External turning Category: Machining > Clamping holder Label: Clamping holder FAQ What is the primary application of this clamping holder? The RP100TM clamping holder from Teknik Makina is intended for external turning operations in metalworking, providing secure tool fixation for turning processes. Which manufacturer produces the RP100TM? The RP100TM is supplied by Teknik Makina and listed with SKU RP100TM for easy identification during procurement. Can the clamping holder be ordered through Metav? Yes, the RP100TM is available via Metav Werkzeuge and its consultants can advise on compatibility and supply. How does the RP100TM support workshop efficiency? By providing stable clamping for external turning, the RP100TM reduces variability at the tool tip and aids in achieving repeatable turning results, supporting reliable production planning. Is technical documentation available for the RP100TM? Technical details and procurement information for the RP100TM can be requested through Metav Werkzeuge, which offers product guidance and distribution for Teknik Makina items. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 107.5° DDHNL 2020 K15 for DN-- 1506 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Combine precise left‑hand cutting geometry with a compact clamp height and ISO compatibility to ensure steady, repeatable turning results. Benefit from a robust DDHN toolholder that accepts DN-- 1506 indexable inserts and secure procurement or application advice through Metav Werkzeuge. D295TM Clamp Holder — DDHN toolholder for DN-- 1506 indexable inserts (left‑hand) by Teknik Makina The D295TM clamp holder is a left‑hand DDHN toolholder designed for turning applications with DN-- 1506 indexable inserts, offering compact clamping and consistent cutting geometry for workshop and production environments Left-hand cutting geometry Fits DN-- 1506 indexable inserts ISO DDHNL 2020 toolholder designation 20 mm clamp height, 125 mm overall length Reliable left‑hand turning performance for stable results The compact DDHN design delivers a controlled cutting position that is particularly suited for left‑hand turning operations. With a cutting angle 107.5° and defined geometry, the holder ensures the insert sits consistently at the intended clearance and approach angle, which helps to maintain tool life and dimensional repeatability. The modest clamping height 20 mm and 125 mm overall length reduce overhang, resulting in improved rigidity without compromising accessibility in tight setups. This combination is engineered to support efficient machining cycles and predictable tool behaviour. Seamless compatibility reduces setup time and inventory complexity Designed specifically for DN-- 1506 indexable inserts, the holder simplifies tooling selection and storekeeping. The ISO DDHNL 2020 designation standardises interface expectations, so insert seating and clamping forces are predictable across compatible systems. The toolholder's cutting head width 25 mm and cut height 33 mm match common insert geometries, enabling straightforward replacement and minimising adjustment time. Fewer variant combinations in the tool inventory translate into faster changeovers and a leaner production flow. Compact form and reliable clamping for repeatable machining Despite its compact footprint, the holder is manufactured to deliver dependable clamping and repeatability. The 0.428 kg mass gives a balance between rigidity and manoeuvrability for manual and automated toolposts, while the 20 mm body width provides a solid base for the insert seat. The DDHN clamping concept secures the indexable plate firmly, reducing micro‑movement under load. Where tool stability matters, this toolholder design helps to reduce chatter and maintain surface finish quality, supporting consistent part acceptance rates. Contact Metav Werkzeuge for tailored application advice and secure the D295TM clamp holder for stable left‑hand turning setups via Metav Werkzeuge's procurement channels Technical data Article number: D295TM Manufacturer: Teknik Makina Product designation: DDHN clamp holder Compatible inserts: DN-- 1506 Facts Clamp height: 20 mm Body width: 20 mm Cutting head width: 25 mm Cut height: 33 mm Overall length: 125 mm Weight: 0.428 kg Cutting angle: 107.5° Cutting direction: left Special features ISO designation: DDHNL 2020 Toolholder type: DDHN Bar designation: K15 Indexable insert compatibility: DN-- 1506 FAQ Which inserts are compatible with this holder? The D295TM clamp holder accepts DN-- 1506 indexable inserts and is engineered to secure them in the DDHN seat. Is the cutting direction left‑hand or right‑hand? This toolholder is configured for left‑hand cutting applications. What is the overall length and how does that affect rigidity? The overall length is 125 mm; the reduced overhang contributes to higher rigidity and improved resistance to chatter during turning. Does the holder follow an ISO designation for easier selection? Yes—the holder carries the ISO DDHNL 2020 designation, aiding compatibility with standardised insert forms. What is the weight and does it suit automated toolposts? Weighing 0.428 kg, the holder balances rigidity with manageable mass for both manual and automated toolpost arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 107.5° DDHNL 2525 M15 for DN-- 1506 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Robust left‑hand toolholding with a 25 x 25 mm shank and 150 mm overall length provides stable clamping and repeatable cutting geometry for lathe operations; benefit from precise setup and consistent tool life. Order the insert holder directly via Metav Werkzeuge or ask our consultants for application guidance. Insert holder DDHN for DN-- 1506 indexable inserts (DDHNL 2525) – Left‑hand, shank 25 x 25 mm by Teknik Makina The insert holder DDHN for DN-- 1506 indexable inserts is a left‑hand turning toolholder designed for secure clamping of DN-- 1506 inserts in conventional and CNC lathes, providing a compact, rigid solution for short‑overhang turning tasks Left‑hand cutting orientation Shank 25 x 25 mm Cutting head width 32 mm Total length 150 mm Stable clamping for consistent turning results The holder's 25 x 25 mm shank and compact total length 150 mm ensure a low overhang and reduced vibration, which translates directly into improved surface finish and longer insert life. The combination of a cutting height 33 mm and a cutting head width 32 mm gives a reliable seating for the indexable insert, maintaining repeatability across serial production. For engineers seeking predictable geometry, the holder's mass (approx. 0.753 kg) contributes to rigidity without excessive bulk, making set‑up straightforward while preserving tool life and reducing rework. Compatibility with DN-- 1506 indexable inserts and ISO designation Designed specifically for DN-- 1506 indexable inserts, the tool follows the ISO style DDHNL 2525, which denotes the holder geometry and shank dimensions. The left‑hand cut direction is suited to operations where the tool approaches from the operator's right, and the cutting angle 107.5° provides the intended clearance and contact geometry for effective chip control. The mounting interface is specified as M15, enabling straightforward installation on corresponding boring bars or back‑plate adaptors. Explaining the concept briefly: indexable inserts allow rapid replacement without regrinding, so downtime is minimised and process stability is improved. Smooth integration into workshop workflows The toolholder's geometry and measured dimensions make it simple to incorporate into existing tool layouts. With a clear ISO designation and standard shank size, procurement and replacement are uncomplicated, supporting lean stocking and quick changeovers. The design emphasises pragmatic benefits: reduced set‑up time, predictable cutting behaviour and dependable repeatability in medium‑duty turning tasks. When paired with appropriate DN-- 1506 inserts, the system supports effective chip evacuation and consistent finish, aiding throughput targets and lower overall production cost per part. Contact Metav Werkzeuge for specific application advice on the Teknik Cutting Tools DDHN insert holder (SKU D296TM) and to arrange reliable supply direct from our Emmerich hub Technical data Article number: D296TM Manufacturer: Teknik Makina Facts Total length: 150 mm Shank width: 25 mm Shank height: 25 mm Cutting head width: 32 mm Cutting height: 33 mm Weight: 0.753 kg Cutting angle: 107.5° Direction: left Suitable for inserts: DN-- 1506 ISO designation: DDHNL 2525 Special features For indexable inserts: DN-- 1506 Designation (English): DDHN for DN-- 1506 Indexable Inserts ISO type: DDHNL 2525 Mounting shaft/thread: M15 Left‑hand turning holder Compact shank 25 x 25 mm FAQ Which inserts are compatible with this holder? The insert holder is specified for DN-- 1506 indexable inserts; matching DN-- 1506 grades and chipbreakers will ensure correct seating and performance. Is this holder suitable for right‑hand turning? No, this toolholder is configured for left‑hand cutting; for right‑hand operations a right‑hand variant should be chosen. What are the critical dimensions for toolpost setup? Key dimensions are the shank 25 x 25 mm, cutting height 33 mm and total length 150 mm, which guide set‑up height and overhang decisions. What does the ISO designation DDHNL 2525 indicate? DDHNL 2525 denotes the holder geometry and shank size standard; the code helps to match the holder to existing toolholders and fixtures according to industry conventions. Can the holder be mounted on standard boring bars? The holder uses an M15 mounting interface; compatibility depends on the bar or adaptor thread, so ensure matching interfaces when integrating into tool assemblies. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 107.5° DDHNR 2020 K15 for DN-- 1506 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a robust combination of precision, compatibility and compact design to maintain consistent turning performance. The toolholder's 107.5° cutting angle and ISO designation ensure reliable chip control and predictable cutting behaviour; order directly via Metav Werkzeuge or contact our specialists for tailored application advice. Clamping holder DDHN for DN-- 1506 indexable inserts — right-hand, 107.5° Clamping holder DDHN for DN-- 1506 indexable inserts designed for secure seating of DN-- 1506 plates in conventional turning applications, offering compact dimensions for tight setups DDHNR 2020 ISO holder for DN-- 1506 inserts 107.5° cutting angle for stable chip control Right-hand orientation for conventional turning Compact 125 mm length, 0.428 kg weight Increase process reliability with controlled cutting geometry The holder is engineered to deliver consistent chip formation thanks to its 107.5° cutting angle, which reduces vibration and promotes repeatable surface quality. The ISO designation DDHNR 2020 confirms standardised dimensions and fit, so integration into existing tool posts and setups is straightforward. With a compact 125 mm overall length and a modest mass of 0.428 kg, this toolholder minimises overhang while maintaining rigidity—an advantage for stable turning and predictable tool life. Secure insert seating for improved tool life and repeatability Compatibility with DN-- 1506 indexable inserts ensures secure clamping and reliable seat contact. The clamping geometry is designed to hold the insert firmly under cutting loads, which supports sustained tool performance and reduces the frequency of securement checks. The shank designation K15 indicates the intended bore/shank standard for mounting, aiding in fast selection and replacement within established CNC tool libraries. Compact dimensions that simplify workshop layouts With a 20 mm holder height, a 25 mm cutting-head width and 20 mm overall width, the design suits confined toolpost arrangements and multi-station turrets. The reduced footprint allows close tool spacing without sacrificing stability, making it suitable for short-run production or flexible job-shop environments where quick changeovers and tool density matter. The right-hand cut direction is matched to conventional turning cycles, reducing setup complexity. Practical handling and maintenance benefits for daily use Built to support efficient workshop routines, the holder’s layout simplifies insert change and clamping operations, lowering downtime. The combination of standardised ISO form, compact size and recognisable shank coding streamlines inventory management across multiple machines. Regular inspection of clamping screws and seat surfaces will preserve the holder's long service life and help sustain machining quality over extended production. For procurement or process consultation regarding Teknik Makina clamping holders, contact Metav Werkzeuge for application-specific advice and supply from our Emmerich facility Technical data Article number: D096TM ISO designation: DDHNR 2020 Compatible inserts: DN-- 1506 Brand: Teknik Makina Cutting direction: right Facts Overall length: 125 mm Weight: 0.428 kg Cutting angle: 107.5° Holder height: 20 mm Cutting-head width: 25 mm Width: 20 mm Cutting height: 33 mm Special features Shank designation: K15 Right-hand orientation Designed for indexable inserts DN-- 1506 Compact design for tight setups FAQ What inserts fit this holder? The clamping holder is specified for DN-- 1506 indexable inserts; the ISO form DDHNR 2020 ensures correct seating for those plates. Is the holder suitable for right-hand turning only? Yes, the toolholder is configured for right-hand cutting; its geometry and clamping orientation are optimised for conventional right-hand turning operations. What are the key dimensions to check for compatibility? Important dimensions include the 125 mm overall length, 20 mm holder height, 25 mm cutting-head width and the DDHNR 2020 ISO form for insert fit. How does the 107.5° cutting angle affect machining? The 107.5° angle promotes stable chip flow and reduced vibration, which supports consistent surface finish and extended insert performance in turning cycles. Can Metav Werkzeuge advise on application suitability? Metav Werkzeuge can provide application guidance and confirm whether the Teknik Makina clamping holder (SKU D096TM) fits specific machines and part programmes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 107.5° DDHNR 3232 P15 for DN-- 1506 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a rigid, workshop-ready toolholder that combines secure clamping for DN-- 1506 indexable inserts with a compact 170 mm overall length and a 107.5° cutting angle for stable, repeatable turning operations. Order this item through Metav Werkzeuge or consult the team for application advice. Clamping holder DDHN for DN-- 1506 indexable inserts – Right‑hand, DDHNR 3232 (Teknik Makina) The Clamping holder DDHN for DN-- 1506 indexable inserts is a robust right‑hand turning toolholder designed for industrial lathe applications and compatible with standard P15 shank toolposts Secure clamping for DN-- 1506 inserts Right‑hand cutting orientation ISO designation DDHNR 3232 compatibility Compact 170 mm overall length Precision clamping for consistent turning results A focus on machining stability is delivered through the holder's rigid construction and defined geometry. The design secures DN-- 1506 indexable inserts with reliable repeatability, reducing tool deflection and improving surface finish. The cutting angle 107.5° supports predictable chip flow for typical turning operations, while the clamping height 32 mm and cutting edge height 33 mm maintain correct insert positioning to shorten setup time and lower scrap rates. These measurable properties make the toolholder suitable for production runs where consistent part quality and minimal rework are priorities. Simple integration with standard toolposts and shanks Engineers benefit from straightforward retrofitting: the holder conforms to the DDHNR 3232 ISO family and accepts common P15 shank mounting, so it fits existing toolposts without elaborate modification. The overall length 170 mm and head width 40 mm balance reach and rigidity, while the weight 1.29 kg contributes to stable spindle dynamics. Clear dimensional data ensures predictable tool overhang and enables correct speed/feed calculations, supporting efficient cycle planning and reduced trial runs on the shop floor. Designed for workshop reliability and throughput Built for repetitive use, this toolholder minimises downtime through quick insert changes and secure clamping mechanics; its specification supports right‑hand turning applications where reliable performance matters. The body width 32 mm provides a compact footprint for multi‑tool turrets, and the measured geometry helps limit vibration during heavier cuts. By focusing on durability and consistent clamping, the component contributes to higher machine utilisation and a smoother production flow across small and medium batch sizes. Contact Metav Werkzeuge today for tailored advice on Teknik Makina clamping holders and to confirm compatibility with existing toolposts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D098TM Manufacturer: Teknik Makina Product: Clamping holder DDHN for DN-- 1506 indexable inserts Core technical data Clamping height: 32 mm Cutting edge height: 33 mm Head width: 40 mm Body width: 32 mm Overall length: 170 mm Weight: 1.29 kg Cutting angle: 107.5° Special features Right‑hand cutting direction Compatible with DN-- 1506 indexable inserts ISO designation DDHNR 3232 P15 shank designation FAQ Which indexable inserts fit this holder? The holder is specified for DN-- 1506 indexable inserts; the geometry and clamping system are matched to that insert family for secure seating and reliable cutting performance. Is this holder suitable for left‑hand turning? This toolholder is configured for right‑hand cutting direction as indicated by its design and is therefore intended for right‑hand turning applications. What are the key dimensions to check before fitting? Check the overall length 170 mm, clamping height 32 mm, head width 40 mm and the P15 shank interface to ensure compatibility with the machine tool and turret. How is the product referenced for ordering and documentation? Order or reference the item using SKU D098TM and the designation DDHN for DN-- 1506 indexable inserts (DDHNR 3232) to ensure the correct toolholder is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 107.5° SDHCL 2020 K11 for DCMT 11T3 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Combine precise indexable-insert compatibility with compact dimensions and robust clamping to achieve repeatable turning results and shortened setup times. Order the Teknik Makina SDHCL 2020 clamp holder via Metav Werkzeuge or consult our specialists for application-specific recommendations. Clamp holder SDHCL 2020 (SDHC for DCMT indexable inserts) — left-hand, 125 mm overall length The clamp holder SDHCL 2020 is a left-hand toolholder engineered for external turning with DCMT 11T3 indexable inserts in workshop and light production environments. SDHCL 2020 ISO designation For DCMT 11T3 indexable inserts Left-hand orientation, 107.5° cutting angle Compact 125 mm overall length Consistent part quality through secure clamping The principal advantage of this toolholder is its robust clamping design, which secures DCMT 11T3 inserts reliably and reduces insert movement under cutting forces. The combination of a deliberate clamp geometry and the ISO designation SDHCL 2020 makes inspections and replacements straightforward, promoting consistent part tolerance and fewer scrapped components. This results in measurable improvements in first-pass yield and less time spent reworking components. Space-saving dimensions for improved access With a 125 mm overall length and a narrow 20 mm width, the holder provides access to tight diameters and close shoulder work without compromising stiffness. The 25 mm cutting head width and 25 mm cutting height support a compact footprint while maintaining an effective contact area for the insert. Workshops benefit from a reduced tool overhang and improved chip flow, which together enhance tool life and machining stability on small to medium workpieces. Designed for straightforward shop-floor integration The holder’s left-hand orientation and a precise 107.5° cutting angle are suited to conventional turning setups where left-handed approach angles are required. The shank designation K11 ensures compatibility with common tooling fixtures, simplifying inventory management. At 0.411 kg, the component is light enough for fast changeovers yet engineered to deliver the rigidity expected in production runs. These attributes combine to shorten setup times and reduce the number of special adapters required. Practical benefits for procurement and production planning Adopting this clamp holder reduces the variety of specialised holders needed, since it accepts a widely used insert format and conforms to an ISO-style designation. Fewer tool variants mean lower logistical overhead and faster tool changes at the turret. The technical data support straightforward procurement choices and ensure that purchasing decisions are based on measurable parameters rather than approximations. For procurement or technical clarification regarding the Teknik Makina SDHCL 2020 clamp holder, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for expert guidance and delivery options. Technical data Article number: D350TM Manufacturer: Teknik Makina Product: SDHC for DCMT Indexable Inserts ISO designation: SDHCL 2020 Facts Height: 20 mm Cutting head width: 25 mm Width: 20 mm Cutting height: 25 mm Overall length: 125 mm Weight: 0.411 kg Cutting angle: 107.5° Suitable insert: DCMT 11T3 Cutting direction: left Special features Shank designation: K11 ISO designation: SDHCL 2020 For DCMT 11T3 indexable inserts Left-hand turning orientation FAQ Which insert type fits this holder? The holder accepts DCMT 11T3 indexable inserts; compatibility is stated for the SDHCL 2020 clamp holder (Teknik Makina, SKU D350TM). Is the toolholder suitable for left-hand turning only? Yes. The design is specified for left-hand cutting direction and the geometry is optimised for left-hand operations. What are the key dimensions to check for turret mounting? Important dimensions include the 125 mm overall length, 20 mm width, and 20 mm height; these determine clearance and fixture compatibility for the workshop turret. How does the clamp holder support repeatable setups? The clamp geometry and ISO-style designation ensure repeatable seating of DCMT 11T3 inserts, reducing variation between tool changes and improving process reliability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 107.5° SDHCR 2020 K11 for DCMT 11T3 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of the combination of precise compatibility with DCMT 11T3 indexable inserts, a firm 107.5° cutting geometry and a compact 20 mm clamp height for reliable, repeatable turning operations — order directly via Metav Werkzeuge or speak with our consultants for application advice. Klemmhalter SDHCR 2020 – clamping holder for DCMT inserts, 107.5° cutting angle (right-hand) Klemmhalter for right-hand turning, designed to accept DCMT 11T3 indexable inserts for stable, high-quality facing and light to medium turning tasks Right-hand clamping holder for turning Compatible with DCMT 11T3 indexable inserts 107.5° cutting angle for stable engagement Clamp height 20 mm, cutting head width 25 mm Precision compatibility that reduces setup time The SDHCR 2020 clamping design ensures consistent seating of DCMT 11T3 indexable inserts, which are replaceable cutting tips used to maintain cutting performance without regrinding. Precise seating and the 107.5° nose angle reduce deflection and promote even wear, so cycle times remain predictable. Thanks to the measured 20 mm clamp height and a 25 mm cutting-head width, the toolholder offers a compact footprint while maintaining rigidity — an important balance for medium-duty turning where both access and stability matter. Stable clamping for repeatable results Built for right-hand operations, this clamping tool secures the insert reliably using the standard clamping geometry SDHC for DCMT. The clamp mechanism is arranged to hold inserts with minimal play, which translates to fewer re-tightening incidents and reduced micro-vibration at the cutting edge. The nominal cutting height of 25 mm aligns the cutting tip consistently with the lathe centre, lowering the risk of unexpected offsets and thus decreasing setup checks. The overall weight of 0.411 kg contributes to a robust but manageable tool assembly during handling and changeover. Practical benefits for workshop productivity Adopting a holder designed to match common ISO-designated inserts simplifies inventory and tool management. Because indexable inserts can be rotated or replaced quickly, downtime is minimised and tool life is extended in comparison with brazed or monolithic cutters. The holder’s ISO designation SDHCR 2020 denotes a standardised shank and geometry that integrate with conventional tool posts and tool blocks; the shank reference K11 assists in confirming mount compatibility. Fewer variables at setup mean predictable machining quality across repeated batches, supporting leaner production planning. Robust supplier backing and application support Sourcing this clamping holder via Metav provides access to a broad selection of compatible inserts and assembly advice from a supplier with a European distribution and quality filter in Emmerich. Metav’s extended product range and experience in precision tools mean spare parts and matching components are available quickly, reducing lead times on replacements and upgrades. For newcomers to indexable tooling, the principle is straightforward: the holder secures a replaceable insert; when the cutting edge is worn, the insert is indexed or swapped — restoring cutting performance without retooling the entire holder. For precise turning applications relying on standard DCMT inserts, choose the Teknik Makina clamping holder and contact Metav Werkzeuge for tailored guidance and quick delivery — eMail info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: D250TM Manufacturer: Teknik Makina Facts Clamp height: 20 mm Cutting-head width: 25 mm Cutting height: 25 mm Cutting angle: 107.5° Overall length: 125 mm Weight: 0.411 kg Direction: right Special features ISO designation: SDHCR 2020 Suitable for: DCMT 11T3 indexable inserts Shank designation: K11 Bezeichnung (English): SDHC for DCMT Indexable Inserts FAQ Which indexable inserts fit this clamping holder? The clamping holder D250TM is designed for DCMT 11T3 indexable inserts and matches the insert geometry intended by the SDHC holder family. Is the holder suitable for right-hand or left-hand turning? This model is specified for right-hand turning applications; the orientation is fixed by the tool’s cutting geometry. How does the 107.5° cutting angle affect machining? A 107.5° nose angle provides stable engagement with the workpiece, helping to distribute cutting forces and improve insert life under typical turning conditions. What does ISO designation SDHCR 2020 mean for compatibility? The SDHCR 2020 designation indicates standardised shank and clamp geometry, facilitating integration with common tool posts and simplifying replacement across similar toolholders. Can this holder reduce setup time in batch production? Yes — by accepting standard indexable inserts such as DCMT 11T3, the holder allows rapid insert changes and consistent seating, which reduces setup variability and downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Precision coolant delivery for demanding turning operations
Tool holders with internal coolant are precision components used in machining, particularly turning, to hold indexable inserts securely and feed them to the workpiece. Also referred to as through-coolant tool holders or internal coolant toolholders, these systems channel coolant directly to the cutting edge to reduce thermal load and improve chip control in heavy or high-speed machining.
How they work and where they help most
Standard holders without internal coolant rely on external nozzles, which can be blocked by chips and fail to reach the insert tip reliably. In contrast, holders with internal coolant contain integrated coolant channels and boreholes in the tool shank that guide the coolant under pressure straight to the insert. This targeted supply is particularly valuable for difficult-to-machine materials, high cutting speeds, deep cuts and internal turning where conventional coolant delivery struggles.
Key facts
| characteristic | detail |
|---|---|
| category | tool holders with internal coolant |
| common synonyms | internal coolant toolholders; coolant-through tool holders |
| typical application | turning, heavy machining, internal bore finishing |
| coolant routing | internal channels and boreholes delivering coolant to the insert seat |
| key technical effect | direct cooling at the cutting edge, improved chip evacuation, reduced thermal load |
| comparison | standard holders use external nozzles; internal coolant holders route coolant through the shank |
Measurable benefits for production
- Direct coolant feed reduces the thermal stress on the insert, extending tool life.
- Improved pressure at the cutting zone enhances chip evacuation, reducing recutting and tool damage.
- More consistent cooling helps achieve better surface finish and dimensional stability.
- Reliable coolant delivery under challenging chip conditions supports higher cutting speeds and heavier cuts.
Metav: precision supply and industrial competence
Metav positions itself as the practical partner for workshops and production: a European quality filter based in Emmerich that combines broad product availability with technical expertise. With over 48,000 customers and more than 250,000 products, Metav supplies through-coolant tool holders and related accessories with dependable logistics and application guidance, making sophisticated cooling solutions accessible for every workshop.
In short
Tool holders with internal coolant deliver targeted, high-efficiency coolant to the insert tip, improving chip control, tool life and surface quality in demanding turning tasks.
FAQ
When should I choose tool holders with internal coolant over standard holders?
Choose tool holders with internal coolant when external coolant nozzles cannot reliably reach the cutting edge, for deep cuts, internal turning, heavy machining or when machining difficult materials at high speeds. The internal coolant toolholders ensure direct cooling and better chip evacuation in these scenarios.
Can internal coolant toolholders be used with all insert types?
Internal coolant toolholders are compatible with most indexable inserts provided the holder and insert interface are specified for coolant-through operation. Verify seat type and manufacturer recommendations for coolant-through compatibility.
What performance improvements can I expect from coolant-through tool holders?
Typical improvements include longer tool life, fewer interruptions from clogged external nozzles, improved chip control and a more consistent surface finish due to reduced thermal distortion at the cutting edge.
How is coolant delivered inside an internal coolant toolholder?
Coolant is channelled through boreholes and internal passages in the tool shank directly to the insert pocket; this focused path creates sufficient pressure at the cutting edge to flush chips away and cool the insert effectively.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com