High-precision clamping holders with internal coolant for extended tool life
Clamping holders with internal coolant are designed to secure indexable inserts accurately while delivering coolant directly to the cutting edge, reducing thermal load and improving chip evacuation in demanding metalworking operations. Used for turning and internal machining of tough materials, these holders channel the coolant through built-in boreholes to the insert and beneath the chip, which boosts tool life and enhances surface finish. As a reliable system solution, the combination of clamping holder, internal coolant and indexable insert ensures consistent performance at high cutting speeds and under heavy cut conditions.
Klemmhalter 107.5° SVHBR 2020 K16 for VBMT 1604 Inserts Right-Handed - Teknik Makina
High clamping stability and a precise 107.5° cutting geometry reduce vibration and extend insert life; combined with a compact 125 mm overall length this holder gives predictable toolpaths and secure seating for VBMT inserts. Order the SVHBR 2020 clamping holder directly via Metav Werkzeuge or consult our team for tailored technical advice. SVHBR 2020 clamping holder 107.5° — for VBMT 1604 indexable inserts (Teknik Makina) SVHBR 2020 clamping holder designed for secure mounting of VBMT 1604 indexable inserts in right-hand cutting applications with a 107.5° approach angle For VBMT 1604 inserts 107.5° cutting angle Total length 125 mm Right-hand cutting configuration Stable clamping for consistent surface quality The robust clamping geometry of this holder delivers a high clamping force and a steady contact area that reduces micro-movement during cuts. With a defined 107.5° approach angle and compatibility with VBMT 1604 inserts, the design supports repeatable results and longer insert life by lowering vibration and heat build-up. This leads to fewer rework cycles and improved cycle-time predictability in batch production. Compact dimensions that simplify set-up and reach Designed with exacting dimensions — 125 mm overall length, 20 mm shank width, 20 mm shank height and a 25 mm cutting-head width — the holder balances rigidity with accessibility. A cutting height of 30 mm and a mass of 0.387 kg ensure stable tool engagement without excessive overhang. These measured values make clamping positions reproducible, helping to reduce set-up time and ensuring reliable toolpaths in confined fixtures. Straightforward maintenance and integration in existing toolrooms The holder follows common industrial conventions for insert change and fixturing, featuring the ISO designation SVHBR 2020 and a K16 clamping interface that fits standard tool post arrangements. The compact form and familiar mounting dimensions facilitate fast replacement of worn inserts and predictable regrinding schedules, supporting uninterrupted production. Robust construction minimises unplanned downtime and helps to sustain throughput across mixed production runs. For reliable clamping in turning and milling set-ups, request the Teknik Cutting Tools D354-1TM via Metav Werkzeuge for swift supply and expert advice from our Emmerich-based team. Technical data Article number: D354-1TM GTIN: 4061905153563 Brand: Teknik Makina Facts Overall length: 125 mm Shank width: 20 mm Shank height: 20 mm Cutting-head width: 25 mm Cutting height: 30 mm Weight: 0.387 kg Cutting angle: 107.5° Cutting direction: right Special features Compatible with VBMT 1604 indexable inserts ISO designation: SVHBR 2020 Clamping screw interface: K16 Label: Klemmhalter SVHBR 2020 107.5° VBMT 1604 FAQ Which inserts fit this holder? The SVHBR 2020 clamping holder is designed specifically for VBMT 1604 indexable inserts and ensures correct seating and orientation for that insert type. Is the holder suitable for right-hand cutting only? Yes. The tool geometry and approach angle are configured for right-hand cutting applications, as indicated by the product data. What is the overall length and why does it matter? The overall length is 125 mm, which provides a balance between reach and rigidity; shorter overhang contributes to improved stability and surface finish. Can this holder be used in tight fixtures? With a compact shank of 20 mm x 20 mm and a cutting-head width of 25 mm, the holder is suitable for installations where space is limited while still offering stable clamping. What designation should be referenced when ordering spare parts? Order using the article number D354-1TM or the ISO designation SVHBR 2020 to ensure the correct clamping interface and compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 107.5° SVHBR 2525 M16 for VBMT 1604 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, rigid clamping solution that combines precise compatibility with VBMT inserts and a stable 150 mm reach for consistent turning performance; order the clamping holder directly via Metav Werkzeuge or ask the consultants for technical guidance. Clamping holder D356-1TM — SVHB for WBMT indexable inserts, right-hand A Clamping holder D356-1TM engineered for right-hand turning operations, compatible with VBMT 1604 indexable inserts and suitable for external turning and general lathe use Right-hand orientation for conventional turning Compatible with VBMT 1604 indexable inserts 150 mm overall length for stable reach Robust mass of 0.712 kg for cutting steadiness Precision where it matters: consistent cutting geometry The holder delivers a defined cutting geometry through its 107.5° rake, which stabilises chip flow and reduces vibration during external turning. Designed for use with VBMT 1604 inserts, the toolholder ensures repeatable performance at changeover thanks to its standardised interface; this reduces setup variability and supports reliable process results in small-batch production or repair work. The right-hand orientation is optimised for conventional turning cycles, and the geometry is explained here to help assess toolpath and feed choices for given machining tasks. Rigidity and reach for stable machining A compact overall length of 150 mm combined with a head width of 32 mm and a body width and height of 25 mm produces a stiff assembly that resists deflection under cutting forces. The holder’s mass of 0.712 kg contributes to damping and steadiness during cuts, which translates into improved surface finish and extended insert life. The ISO designation SVHBR 2525 indicates a standardised shank profile, while the integrated thread specification M16 relates to the clamping screw interface – together these details support straightforward replacement and integration into existing toolposts. Compatibility and shop-floor practicality Designed for WBMT-style indexable inserts and explicitly matching VBMT 1604, the holder simplifies inventory and ensures interchangeability across common insert grades. The clamping concept facilitates safe insert changes and secure locking, keeping cycle interruptions to a minimum. Given its compact footprint and standard mount, this toolholder is well suited to workshop environments, maintenance shops and production cells that value repeatable setups and straightforward tool management. Technical customers will appreciate the clear, mechanical basis for its selection and the reduction in downtime associated with rapid insert swaps. For robust, repeatable turning from Teknik Cutting Tools, contact Metav Werkzeuge for product availability and tailored technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D356-1TM ISO designation: SVHBR 2525 Suitable for inserts: VBMT 1604 Core data Overall length: 150 mm Head width: 32 mm Body width: 25 mm Body height: 25 mm Cutting height: 30 mm Cutting angle: 107.5° Mass: 0.712 kg Features / Compatibility SVHB design for WBMT indexable inserts Right-hand cutting direction Shank thread / clamping screw: M16 SKU: D356-1TM FAQ What inserts fit this holder? The holder accepts VBMT 1604-style indexable inserts; compatibility is specified for WBMT-type insert geometry in the product description. Is the clamping holder suitable for right-hand turning only? Yes, this toolholder is configured for right-hand cutting; the geometry and chipflow are optimised for conventional right-hand turning operations. How does the 150 mm length affect performance? A 150 mm overall length provides a balanced reach for external work while maintaining rigidity; this length helps reduce deflection compared with longer overhangs. Which standard designation identifies the shank? The shank conforms to the ISO-style SVHBR 2525 profile, which assists with interchangeability in standard toolposts. What is the mounting thread specification? The clamping screw interface is specified as M16, which relates to the secure locking of the insert clamp. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 107.5° SVHCL 2525 M16 für VCMT 1604 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Take advantage of a robust, precision-engineered clamp holder that combines secure clamping, compatibility with VCMT 1604 indexable inserts and a compact 150 mm overall length for efficient left-hand turning processes; order directly via Metav Werkzeuge or consult the team for application advice. SVHCL 2525 clamp holder by Teknik Makina — left-hand turning for VCMT 1604 inserts A SVHCL 2525 clamp holder designed for left-hand turning operations with VCMT 1604 indexable inserts, suited to precision lathe work and CNC turning applications Left-hand cutting orientation Compatible with VCMT 1604 inserts ISO designation SVHCL 2525 Robust 150 mm overall length Greater process efficiency through precise geometry With a focus on reproducible turning results, the SVHCL 2525 clamp holder offers a defined cutting angle of 107.5° and compatibility with VCMT 1604 indexable inserts. The result is consistent chip flow and reduced rework rates, which contributes directly to shorter cycle times and improved first-pass yield. The holder’s geometry simplifies insert positioning and repeatability, making it an effective choice for production runs where stability and predictable performance are priorities. Secure clamping and vibration reduction for better surface finish The tool body features a clamping height of 25 mm, a cutting height of 30 mm and a head width of 32 mm, dimensions that create a rigid support for the insert and reduce micro-movements during cutting. This rigidity helps to lower vibration and chatter, delivering improved surface quality and longer insert life. At an operational level, the compact 150 mm overall length and the moderate weight of 0.707 kg balance accessibility with mass for steadier turning on small to medium workpieces. Fast integration into workshop setups and simple mounting Engineered for practical installation, the holder uses a mounting specification noted as M16 for secure attachment to compatible tool posts. The ISO marking SVHCL 2525 enables quick identification in tool rooms and aids inventory management. By standardising on a familiar holder designation and insert size, shops can reduce set-up time and keep tooling costs predictable. Clear mechanical interfaces make insert changes straightforward, supporting seamless workflow transitions between operations. Built for production environments and dependable supply Designed with daily workshop demands in mind, this clamp holder pairs practical dimensions with a serviceable design that supports repeatable performance across batches. The specification and compatibility information facilitates correct tool selection and reduces the risk of mismatched components. Combined with Metav’s established distribution and quality filter in Emmerich, the holder is backed by a supply chain focused on reliable availability and consistent product quality for industry and trade customers. For procurement or technical guidance on left-hand turning with VCMT 1604 inserts, contact Metav Werkzeuge for tailored advice and supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: D356TM Manufacturer: Teknik Makina Eclass: 21181004 ISO designation: SVHCL 2525 Description: SVHC for VCMT Indexable Inserts Overall length: 150 mm Weight: 0.707 kg Clamping height: 25 mm Head width (cutting head): 32 mm Cutting height: 30 mm Cutting angle: 107.5° Left-hand cutting orientation Compatible with VCMT 1604 inserts Mounting thread: M16 For VCMT indexable inserts (SVHC for VCMT Indexable Inserts) FAQ What insert type fits this holder? The holder accepts VCMT 1604 indexable inserts; the SVHCL 2525 geometry is matched to that insert size for reliable clamping and cutting performance. Is this holder suitable for right-hand turning? No, this tool is specified for left-hand cutting; for opposite direction machining a right-hand variant is required. What are the mounting and identification details for ordering? Order as SVHCL 2525 clamp holder (SKU D356TM) by Teknik Makina; mounting thread reference is M16 and the eClass is 21181004. How does the holder improve surface finish and tool life? The combination of a 25 mm clamping height, 32 mm head width and a stiff tool body reduces vibration, which helps to enhance surface finish and extend insert life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 107.5° SVHCR 2020 K16 for VCMT 1604 Indexable Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of precise clamping and a compact footprint for stable turning operations; the holder combines a defined 107.5° cutting geometry with compatibility for VCMT 1604 indexable inserts, supporting consistent chip control and repeatable set-ups. Order the clamp holder directly via Metav Werkzeuge or consult the sales team for integration advice. Clamp holder SVHCR 2020 – Right‑hand turning holder, 107.5° for VCMT 1604 by Teknik Makina A Clamp holder SVHCR 2020 designed to secure VCMT 1604 indexable inserts in right‑hand turning applications, offering a compact 125 mm footprint for flexible lathe setups Right‑hand holder for VCMT 1604 inserts 107.5° cutting angle for stable chip control Compact 125 mm overall length, robust design Precision clamping with 20 x 25 mm head dimensions Consistent clamping for repeatable turning results The toolholder is engineered for reliable clamping and repeatable seating of indexable inserts. As an ISO‑style turning holder (SVHCR 2020), it secures VCMT 1604 inserts at a defined 107.5° geometry, which stabilises the insert during engagement and reduces vibration. A stable clamp interface leads to consistent surface finish and predictable tool life, making the component suitable for production and jobbing operations where process reproducibility matters. Small footprint, big setup flexibility With an overall length of 125 mm and a head profile of 25 mm width by 20 mm height, the holder is compact yet sturdy. The reduced envelope facilitates close‑packed tool turret configurations and allows tighter tool spacing without sacrificing rigidity. The compact design supports quick tool indexing and minimal interference in multi‑tool turrets, contributing to shorter setup times and improved machine utilisation during batch runs. Designed for efficient machining and easy handling The holder’s 30 mm cutting‑height and moderate mass (0.384 kg) balance stiffness with ease of handling. The right‑hand orientation is optimised for standard turning directions and chip evacuation paths. The combination of defined geometry and measured mass reduces the likelihood of insert misalignment during index changes, which in turn decreases downtime related to re‑setting. For workshops prioritising throughput and predictable results, this holder offers a pragmatic blend of precision and operational efficiency. For reliable right‑hand turning with VCMT 1604 inserts, request supply and technical advice from Metav Werkzeuge — contact the Emmerich team for fast, dependable delivery and configuration support. Technical Data SKU: D254TM Manufacturer: Teknik Makina ISO designation: SVHCR 2020 Article name (EN): SVHC for VCMT Indexable Inserts Facts Overall length: 125 mm Holder height: 20 mm Holder width: 20 mm Head width: 25 mm Cutting height: 30 mm Weight: 0.384 kg Cutting angle: 107.5° Cutting direction: right Special features Compatible with VCMT 1604 indexable inserts Right‑hand turning holder ISO toolholder form SVHCR 2020 Suitable for stable chip control and repeatable setups FAQ What inserts fit this holder? The clamp holder accepts VCMT 1604 indexable inserts; the holder is specified for that insert form and secures them in the ISO SVHCR 2020 pocket. Is the holder right‑hand or left‑hand? This version is a right‑hand turning holder, designated SVHCR, suitable for standard right‑hand cutting directions. What are the key dimensions for turret planning? Key dimensions: 125 mm overall length, head width 25 mm, holder height 20 mm and cutting height 30 mm; weight approx. 0.384 kg. Which standard describes the holder form? The holder follows the ISO‑style designation SVHCR 2020, indicating the clamping form and right‑hand orientation for machining setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 16 ER for ER Indexable Inserts With Coolant Innenkühlung - Teknik Makina
Take advantage of internal coolant and a secure clamping system compatible with 16 ER indexable inserts for stable machining and reduced setup time; order the holder directly via Metav Werkzeuge or consult our specialists for integration advice. Klemmhalter AP602TM — clamp holder for ER indexable inserts with internal coolant, 16 ER, by Teknik Makina The Klemmhalter AP602TM is a compact clamp holder designed for machining applications that use ER indexable inserts, offering internal coolant delivery and a robust 20 × 20 mm shank for reliable toolholding in production environments. Internal coolant delivery system Compatible with 16 ER indexable inserts Compact 20 × 20 mm shank design Torx fixation M3.5 × 11, T15 key required Secure clamping for consistent cutting performance A precise clamping system is essential for repeatable machining results; this clamp holder locks 16 ER indexable inserts firmly in place to reduce micro-movement that can shorten tool life. The integrated internal coolant channel directs coolant towards the cutting edge, which helps to control cutting temperatures and improve chip evacuation. For workshops and small production lines, the combination of secure insert retention and coolant delivery translates into fewer insert changes and more consistent part quality, preserving surface finish and dimensional accuracy over longer runs. Workshop-ready dimensions and straightforward maintenance With a compact shank of 20 × 20 mm and an overall length of 125 mm, the holder is designed for easy mounting and clearance in multi-tool turrets and tool posts. Fixation is achieved via a Torx M3.5 × 11 screw and requires a T15 key for assembly or replacement, simplifying routine maintenance. Compatibility with locating parts is aided by the supplied references to the TA061 locating plate and TA060 shim, enabling quick retrofitting into existing setups. The unit benefits from first-class metal workmanship, giving a durable feel that sustains alignment and clamping force under repetitive loading. Smooth integration into production workflows Engineered by Teknik Makina, the holder supports stable clamping that can reduce setup times and contribute to predictable cycle times on CNC lathes and turning centres. Its specification makes it suitable for standard indexable-insert tool systems where coolant-through capability is required for longer tool life and improved process reliability. For technical clarifications or to verify compatibility with tool turrets and insert ranges, Metav Werkzeuge’s technical team can provide detailed advice and adaptation options, ensuring the holder integrates seamlessly into existing production routines. Contact Metav Werkzeuge for tailored integration advice on the Teknik Makina AP602TM clamp holder and to discuss suitability for specific machining setups; reach our Emmerich team by email or phone for precise recommendations. Technical Data Article number: AP602TM Name: Klemmhalter for ER indexable inserts with coolant Manufacturer: Teknik Makina SKU: AP602TM Compatible insert size: 16 ER Internal coolant: yes Facts Overall length: 125 mm Shank dimensions: 20 × 20 mm Torx screw: M3.5 × 11 Torx key size: T15 Special features Internal coolant delivery Compatible with locating plate TA061 Use shim TA060 for correct seating First-class metal workmanship FAQ What insert size fits this clamp holder? The clamp holder AP602TM is specified for 16 ER indexable inserts and secures the insert form for stable machining. Does the holder supply coolant to the insert? Yes, the AP602TM features an internal coolant channel to direct cutting fluid towards the insert, improving cooling and chip evacuation. Which fastening parts are required for assembly? Assembly uses a Torx M3.5 × 11 screw and a T15 key; these are the designated fixation components for the AP602TM by Teknik Makina. Can the holder be fitted to existing plates and shims? The holder is compatible with locating plate TA061 and shim TA060, facilitating retrofit into existing tool setups where those parts are used. Who manufactures the clamp holder and who supplies it? The clamp holder is manufactured by Teknik Makina (Teknik Cutting Tools) and supplied through Metav Werkzeuge for distribution and technical support. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 25mm AL 2525 M22- IR22 for 22 IR Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Take advantage of the combination of secure clamping, standardised compatibility and compact dimensions to streamline external threading operations; order the toolholder directly via Metav Werkzeuge or contact our consultants for application advice. Toolholder D266-1TM — Left‑hand external threading holder by Teknik Makina The Toolholder D266-1TM is designed for secure clamping in external threading applications and accepts 22 IR indexable inserts for left‑hand cutting operations. Left-hand cutting direction for reverse threads Compatible with 22 IR indexable inserts ISO designation AL 2525 for standardised fit Robust 150 mm length and 0.748 kg weight Faster set‑up and standardised compatibility for production workflows The D266‑1TM has been engineered to reduce downtime through standardisation and clear compatibility. With the ISO AL 2525 designation and the M22‑IR22 shank identification, the holder integrates with existing tool systems and inventory structures, which simplifies ordering and reduces the need for bespoke adapters. Its acceptance of 22 IR indexable inserts means inserts can be changed quickly without re‑profiling, delivering measurable savings in set‑up time and increasing throughput on repetitive threading tasks. This focus on process efficiency makes the holder a pragmatic choice for machine shops seeking predictable cycle times and lower tool‑room complexity. Compact dimensions that support rigidity and consistent thread quality Designed with a 150 mm overall length, a 25 mm head width and a 25 mm body height, the holder balances accessibility and stiffness. The specified cutting head width 25 mm and cutting height 30 mm concentrate mass near the cutting zone to reduce chatter and maintain thread form, while the modest mass of 0.748 kg keeps dynamic loads manageable on the toolpost. These dimensional choices translate into superior rigidity in many lathe setups, which helps produce repeatable external threads with fewer reworks. For operations where machine space is limited, the compact footprint also aids positioning and tool clearance without compromising functional stability. Practical advantages for workshop logistics and tooling strategy Beyond machining benefits, the design supports a pragmatic tooling strategy. Compatibility with common insert formats and the clear labelling of the holder (ISO and shank designation) means fewer variants are required in the cutting tool store, aiding stock control and procurement. The left‑hand cutting orientation is immediately identifiable for reversing thread tasks, minimising selection errors during changeovers. Where traceability matters, the SKU and technical marking allow for quick identification and replacement, supporting uninterrupted production schedules and straightforward tool management within a mixed fleet of machines. For reliable left‑hand external threading with standardised insert compatibility, request Teknik Makina's D266‑1TM through Metav Werkzeuge — our consultants in Emmerich are available to advise on fitment and workshop integration. Technical data SKU: D266-1TM Manufacturer: Teknik Makina Product: Toolholder for external threading (Klemmhalter) ISO designation: AL 2525 Shank designation: M22- IR22 Compatible inserts: 22 IR Cutting direction: Left Facts Overall length: 150 mm Holder width: 25 mm Holder height: 25 mm Cutting head width: 25 mm Cutting height: 30 mm Weight: 0.748 kg ECLASS: 21181004 Special features Designed for external threading applications Left‑hand cutting for reverse threads Accepts indexable 22 IR inserts Standardised ISO fit for easy integration Clear shank identification M22‑IR22 FAQ What insert type fits this holder? The holder accepts 22 IR indexable inserts; the designation M22‑IR22 indicates the matching shank/interface. Is the toolholder suitable for reverse threads? Yes, the D266‑1TM is specified with a left‑hand cutting direction suitable for external reverse threading. Which standard ensures interchangeability? Interchangeability is supported by the ISO AL 2525 designation and the M22‑IR22 shank marking. How does the holder support machining stability? Compact dimensions (150 mm length, 25 mm width/25 mm height) concentrate rigidity at the cutting zone, reducing chatter and improving thread repeatability. Can the holder be used across different lathes without adapters? The ISO designation and shank identification are intended to match common toolposts and reduce the need for special adapters, depending on the machine's turret or toolpost configuration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Klemmhalter 25mm SRDCN 2525 M12 for RCMT 1204 Wendeplatten Innenkühlung Neutral - Teknik Makina
Take advantage of the combination of precise compatibility, robust clamping and easy integration into existing turning setups for reliable cycle times; order the SRDCN 2525 clamp holder directly via Metav Werkzeuge or ask our consultants if needed. SRDCN 2525 clamp holder — for RCMT indexable inserts, 25 x 25 mm shank The SRDCN 2525 clamp holder designed for turning operations with RCMT 1204 indexable inserts, offering a neutral cutting direction for versatile use in mixed cutting programmes. SRDCN 2525 toolholder design Compatible with RCMT 1204 inserts Neutral cutting direction for versatility 25 mm shank height and 150 mm length Consistent compatibility to keep production moving The SRDCN 2525 clamp holder ensures compatibility with common turning inserts such as RCMT 1204, reducing tool change complexity and helping maintain steady throughput. The ISO designation corresponds to a 25 x 25 mm shank, which is a standard size for many turret and toolpost setups; this standardisation simplifies inventory and changeover planning. With an overall length of 150 mm, the holder balances reach and rigidity, enabling stable cutting conditions across a range of diameters. The emphasis here is on predictable performance: the combination of standard dimensions and proven insert interface supports repeatable process set-up and shorter machine downtime between operations. Secure clamping for repeatable machining accuracy Engineered for strong fixation, the holder uses an M12 clamping arrangement to secure inserts reliably during interrupted cuts and heavy turning. The clamping geometry and robust construction translate into stable tool positioning and consistent part finish, with a cutting head width of 12.5 mm and a cutting height of 38 mm that suit typical RCMT insert geometries. At 0.668 kg the component offers a practical mass that contributes to vibration damping without adding unnecessary load to the turret. These attributes combine to deliver measurable benefits in accuracy and surface quality, especially in batch production where repeatability is essential. Versatile orientation and straightforward maintenance A neutral cutting direction gives this holder flexibility to be used in both conventional and reverse orientations where the machine set-up or operator preference dictates. The clamp-style interface allows quick index-and-clamp insert changes, reducing operator handling time and simplifying master data for tool management systems. The design focuses on durability and ease of inspection: routine checks of the clamping screw and insert seat keep the system within tolerance and extend service intervals. For workshops seeking an effective mix of adaptability and low-maintenance operation, this toolholder supports steady productivity with minimal administrative overhead. Contact Metav Werkzeuge for tailored advice or to secure stock of the Teknik Makina SRDCN 2525 clamp holder (SKU D278TM) and receive guidance on integration into existing tool assortments Technical data Article number: D278TM Manufacturer: Teknik Makina Product: SRDCN for RCMT Indexable Inserts ISO designation: SRDCN 2525 Core data Overall length: 150 mm Shank height: 25 mm Shank width: 25 mm Cutting head width: 12.5 mm Cutting height: 38 mm Weight: 0.668 kg Clamping screw/thread: M12 Cutting direction: neutral Special features Compatible with RCMT 1204 inserts ISO: SRDCN 2525 Neutral cutting direction M12 clamping screw Clamp-style insert fixation Designed for turning operations FAQ Which inserts are compatible with this toolholder? The SRDCN 2525 clamp holder is compatible with RCMT 1204 indexable inserts and accepts the standard insert geometry associated with that designation (SKU D278TM, Teknik Makina). What are the shank dimensions and how do they affect mounting? The holder uses a 25 x 25 mm shank (ISO SRDCN 2525), a common format that fits many turret and toolpost interfaces for secure mounting. Is the holder suitable for both left and right hand turning? Yes, the neutral cutting direction enables use in multiple orientations, providing flexibility for conventional and reverse turning set-ups. What clamping thread is used for the insert screw? Clamping is implemented with an M12 screw thread to provide secure fixation under typical turning loads. How should the holder be maintained to ensure longevity? Regular inspection of the clamping screw and insert seat is recommended; keep contact surfaces clean and replace worn screws or clamping parts to retain repeatable performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 30° SRGCL 2020 K08 for RCMT 0803 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Robust clamping and a defined 30° cutting angle deliver consistent chip control and repeatable results; compatible with RCMT 0803 indexable inserts and supplied in the SRGCL 2020 ISO format — order via Metav Werkzeuge or consult Metav's specialists for application support. Klemmhalter SRGCL 2020 — SRGC toolholder for RCMT indexable inserts (left‑hand, 30°) The Klemmhalter SRGCL 2020 is a left‑hand turning toolholder engineered for use with RCMT 0803 indexable inserts, optimised for repeatable turning and secure clamping in workshop and production environments. Compatible with RCMT 0803 inserts 30° cutting angle for accurate engagement 125 mm overall length for stability Left‑hand orientation for reverse turning Consistent machining through defined geometry and insert compatibility The SRGC design provides a predictable cutting geometry that supports stable chip formation and dimensional accuracy. With a 30° cutting angle and compatibility with RCMT 0803 indexable inserts, the holder enables straightforward insert changes and fast restoration of cutting performance. The ISO designation SRGCL 2020 denotes the toolholder format and mounting envelope, simplifying tool library management. This combination reduces downtime and contributes to a steady production flow when used in repetitive turning tasks. Compact construction that enhances rigidity and tool life A compact but robust profile — 125 mm overall length, 25 mm head width and 20 mm holder width — helps to keep overhang low and stiffness high. The controlled mass of 0.411 kg balances inertial forces while the 25 mm cutting height aligns the insert for optimal chip evacuation. These dimensions translate into less vibration during cutting and improved surface finish, which benefits throughput and downstream processes. The nominal proportions also make the holder suitable for confined tool posts on smaller CNC lathes. Safe clamping and simple handling for faster set‑ups Clamping is executed using the specified shank interface and the K08 designation for the mount system, which matches common toolpost adapters. The design prioritises secure clamping and repeatable seat location so that indexable inserts can be exchanged without recalibrating the tool centreline in most fixtures. Indexable inserts allow a worn cutting edge to be rotated or replaced quickly, keeping machines productive and maintenance straightforward. Recommended applications and production benefits This left‑hand SRGC toolholder is suited to general turning and finishing operations where reverse or counter‑direction cuts are required. By pairing the holder with RCMT 0803 inserts, the system is particularly effective for medium‑duty turning tasks that demand consistent edge position and predictable tool behaviour. The combination of compact geometry and standardised insert format supports efficient inventory management, reduces setup complexity, and accelerates changeovers on mixed‑volume production runs. Contact Metav Werkzeuge for tailored application advice and fast supply of the SRGCL 2020 left‑hand toolholder — direct shipment from Emmerich with technical consultation available Technical data Article number: D293TM Manufacturer: Teknik Makina ISO designation: SRGCL 2020 Core measurements Overall length: 125 mm Holder height: 20 mm Holder width: 20 mm Head width: 25 mm Cutting height: 25 mm Weight: 0.411 kg Cutting angle: 30° Special features Compatible with: RCMT 0803 indexable inserts Cutting direction: left Shank designation: K08 Designation English: SRGC for RCMT Indexable Inserts ECLASS: 21181004 FAQ What insert type fits this toolholder? The SRGCL 2020 toolholder accepts RCMT 0803 indexable inserts, providing quick edge changes and standardised insert handling. Is the holder suitable for left‑hand turning only? Yes, the holder is specified for left‑hand cutting direction and is intended for reverse turning operations. What is the overall length and how does it affect stability? The 125 mm overall length keeps overhang low to improve rigidity and surface finish during turning. Which shank or mounting designation is used? The holder uses the K08 shank designation compatible with common toolpost adapters and clamping systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 30° SRGCR 2020 K12 for RCMT 1204 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
The combination of a compact 125 mm overall length, stable clamping and a 30° cutting angle delivers reliable turning performance in restricted setups; excellent for repeatable workshop production. Order the clamping holder directly via Metav Werkzeuge or ask our consultants if needed. Clamping holder SRGCR 2020 — SRGC for RCMT indexable inserts, right-hand, 30° cutting angle (Teknik Makina) The Clamping holder SRGCR 2020 is a right-hand toolholder designed for turning with RCMT 1204 indexable inserts, optimised for compact toolpaths and secure insert retention across general workshop applications Right-hand cutting orientation Accepts RCMT 1204 inserts 30° cutting angle for profile control Compact 125 mm overall length Consistent chip control and repeatable clamping improve surface quality The SRGCR 2020 is built for reproducible turning cycles where secure clamping and consistent geometry matter. The positive 30° cutting angle supports controlled chip flow and reduces vibration when machining simple profiles or finishing passes. By combining a robust insert seat with a short overhang, the toolholder reduces the risk of chatter and produces a more uniform surface finish, which directly lowers rework and quality checks. Compact form factor increases rigidity and access in tight spaces A short 125 mm overall length with a 25 mm cutting-head width and 20 mm holder dimensions keeps the centre of gravity close to the spindle, raising rigidity under load. The light mass of 0.422 kg reduces centrifugal stress on the turret while providing stable support for the RCMT 1204 insert family. This compact design is advantageous where access is constrained: it enables closer approach to shoulders and small-diameter features, shortening cycle times through reduced vibrations and fewer tool changes. Clear compatibility and practical terminology for workshop use The holder accepts RCMT 1204 indexable inserts and aligns to a common ISO-style mounting for straightforward replacement. Indexable inserts are small carbide cutting tips that are secured to the seat and can be rotated or replaced when worn, allowing fast return to dimension without regrinding. The toolholder’s right-hand orientation specifies the cutting direction for conventional turning setups; match the holder orientation with the machine programme and insert geometry to ensure correct cutting action and safe operation. For reliable right-hand turning with consistent repeatability, contact Metav Werkzeuge for supply and technical advice on Teknik Cutting Tools clamping holders; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D288TM ISO designation: SRGCR 2020 Type: SRGC for RCMT indexable inserts Manufacturer: Teknik Makina Dimensions & weight Overall length: 125 mm Holder height: 20 mm Holder width: 20 mm Cutting-head width: 25 mm Cutting height: 25 mm Weight: 0.422 kg Cutting angle: 30° Compatibility & features Suitable for RCMT 1204 inserts Right-hand cutting direction Shank designation: K12 SKU: D288TM FAQ Which inserts fit this holder? The holder is designed for RCMT 1204 indexable inserts; refer to the insert catalogue for matching grades and geometries when using the SRGCR 2020 (Teknik Cutting Tools, SKU D288TM). Is the toolholder suitable for right-hand turning only? Yes, the toolholder is specified for right-hand orientation, intended for conventional right-hand turning operations. What are the key dimensions to check for turret clearance? Check the 125 mm overall length, 25 mm cutting-head width and 20 mm holder dimensions to ensure turret clearance and correct tool projection for the intended operation with the SRGCR 2020. How does the 30° cutting angle affect machining? A 30° cutting angle promotes controlled chip formation and smoother engagement on profile work, aiding surface finish while maintaining effective material removal on finishing passes. What is the weight and how does it affect stability? The holder weighs 0.422 kg; lower mass with a compact design reduces overhang and improves rigidity, contributing to more stable machining for shorter tool extensions. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 30° SRGCR 2525 M08 for RCMT 0803 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Reliable right‑hand clamping with a 30° cutting angle and a 25 mm shank for stable turning operations; combined with a 150 mm overall length this holder integrates cleanly into existing tool setups. Benefit from secure insert seating and consistent chip control — order via Metav Werkzeuge or consult our advisors for application guidance. SRGCR 2525 Clamping Holder — Right-hand, 30° for RCMT 0803 (Teknik Makina) The SRGCR 2525 clamping holder is a right‑hand indexable insert holder developed for turning operations with RCMT 0803 format inserts, offering a compact, rigid solution for routine and precision machining. Compatible with RCMT 0803 inserts Right‑hand cutting direction 30° cutting angle for controlled chip flow 150 mm overall length Consistent precision for productive turning The SRGCR 2525 follows a straightforward design that prioritises repeatability and process stability. The indexable inserts concept means the cutting edge can be renewed in seconds without regrinding, reducing non‑productive time and keeping cycle times low. A defined 30° cutting angle helps direct chips away from the workpiece and toolpost, improving surface finish and reducing rework. For customers who measure productivity in throughput and uptime, a reliable insert holder translates directly into fewer interruptions on the shop floor. Compact dimensions that enhance rigidity A compact cross‑section results in measurable stiffness at the cutting point. The holder features a 25 mm shank height, a 32 mm cutting‑head width and a 30 mm cutting height, which together deliver a stable clamping platform under moderate cutting forces. The moderate mass — approximately 0.71 kg — balances inertial stability with easy handling during tool changes. These dimensional values support consistent vibration damping and predictable tool life when paired with appropriate insert grades. Compatibility and straightforward mounting Designed for the widely used RCMT 0803 insert format, the holder accepts standard indexable inserts and is mounted via a M08 fastening interface. The 150 mm overall length provides reach for common turning tasks while keeping the overhang minimal to preserve rigidity. The right‑hand cutting orientation is suited to conventional turning directions; when planning tooling layouts, ensure the holder orientation matches lathe spindle rotation. The simple clamping mechanism ensures fast insert replacement and secure seating without specialised fixtures. Practical integration and workshop benefits Beyond geometry and fit, this indexable insert holder supports predictable tool management: fewer regrinds, faster set‑ups and straightforward inventory of cutting tips. For workshops aiming to streamline tooling kits, the holder’s compatibility with a standard insert family reduces the number of distinct part numbers to stock. Technical advisors can recommend insert grades and cutting parameters to suit specific materials and priorities, combining operational efficiency with dependable part quality. The design emphasises practical uptime improvements rather than unnecessary complexity. Consult Metav Werkzeuge for technical selection and secure the Teknik Makina SRGCR 2525 clamping holder for reliable right‑hand turning with RCMT 0803 inserts Technical data Article number: D282TM Manufacturer: Teknik Makina Designation: SRGC for RCMT Indexable Inserts ISO designation: SRGCR 2525 Core technical data Shank height: 25 mm Cutting head width: 32 mm Shank width: 25 mm Cutting height: 30 mm Overall length: 150 mm Weight: 0.71 kg Cutting angle: 30° Cutting direction: right Features and compatibility For indexable inserts RCMT 0803 Mounting bore designation: M08 Right‑hand holder for turning applications SRGCR 2525 geometry FAQ Which inserts fit this holder? The SRGCR 2525 clamping holder is designed for RCMT 0803 indexable inserts and accepts the standard geometry and clamping of that insert family. Is this a right‑hand or left‑hand toolholder? This toolholder is a right‑hand turning holder; ensure the orientation matches the lathe’s spindle rotation for safe operation. What is the overall length and how does that affect rigidity? The overall length is 150 mm; shorter overhangs contribute to improved rigidity and reduced vibration compared with longer tool extensions. Which mounting screw or bore is required? The holder uses an M08 mounting designation for the clamping screw interface; verify compatibility with existing tool posts before installation. Can the holder be used for heavy roughing cuts? The holder is intended as a compact, rigid solution; heavy roughing may demand larger shank dimensions or different holder families — consult tooling data for specific cutting forces and insert grades. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 30° SRGCR 2525 M10 for RCMT 10T3 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a robust combination of precise clamping, proven ISO compatibility and a compact 150 mm reach for stable right‑hand turning operations; order this holder directly via Metav Werkzeuge or consult our specialists for tailored tooling advice. SRGC Clamping Holder — SRGCR 2525 for RCMT 10T3, right‑hand (Teknik Cutting Tools) The SRGC for RCMT Indexable Inserts is a right‑hand clamping holder engineered for conventional turning tasks with RCMT 10T3 inserts, offering a compact 150 mm reach and secure M10 mounting for consistent setup. Right‑hand holder for RCMT 10T3 inserts ISO SRGCR 2525 designation for compatibility 150 mm overall length for stable reach Robust clamping with 30° cutting angle Precision compatibility that reduces setup time The SRGC clamping system is designed around ISO SRGCR 2525 compatibility, making it immediately suitable for RCMT 10T3 indexable inserts. This standardised interface simplifies tooling selection and stock management in the workshop: a single holder type covers a wide range of turning tasks when matched with the appropriate insert geometry. The combination of a compact 150 mm overall length and a moderate mass (approx. 0.72 kg) delivers a stable platform that reduces vibration and shortens adjustment cycles, which in turn decreases non‑productive time on the lathe. Stable cutting geometry for consistent surface quality A defined 30° cutting angle and a 30 mm cutting height are the core of the holder’s cutting geometry: these dimensions promote reliable chip evacuation and predictable insert engagement. The 32 mm cutting‑head width and 25 mm body width ensure a balanced stiffness-to-clearance ratio, so the clamping mechanism maintains repeatable cutter position under varying loads. The integrated M10 fixing provides secure attachment to standard toolposts, supporting consistent cutting forces and helping to extend the life of both the insert and the toolholder through reduced micro‑movement. Workshop benefits: fewer tool changes, more uptime Designed for routine and small‑batch production environments, this indexable insert holder brings operational benefits beyond raw dimensions. Clear standardisation (ISO designation) and compatibility with RCMT‑type inserts simplify replenishment and stock control, while the right‑hand orientation suits the majority of conventional turning setups. For procurement and maintenance teams the result is a reliable, easy‑to‑manage component that lowers the risk of incorrect fits and reduces downtime. Technical buyers will appreciate the pragmatic balance of reach, clamping security and compatibility that supports consistent part quality across shift patterns. Choose the Teknik Cutting Tools SRGC holder for dependable right‑hand turning and contact Metav Werkzeuge in Emmerich for personalised guidance and rapid supply from a trusted European quality partner Technical Data Article number: D286TM Manufacturer: Teknik Makina Product: SRGC clamping holder for RCMT indexable inserts ISO designation: SRGCR 2525 eClass: 21181004 Facts Overall length: 150 mm Weight: 0.72 kg Holder height: 25 mm Cutting head width: 32 mm Body width: 25 mm Cutting height: 30 mm Special features Compatible inserts: RCMT 10T3 Cutting direction: Right Cutting angle: 30° Shank bore / thread: M10 Suitable for indexable insert turning applications FAQ Which indexable inserts fit this holder? The holder accepts RCMT 10T3 indexable inserts; compatibility is ensured by the ISO SRGCR 2525 interface specified for this Teknik Cutting Tools clamping holder (SKU D286TM). Is this holder suitable for left‑hand turning? This model is configured for right‑hand turning; for left‑hand operations a corresponding left‑hand toolholder should be selected. What are the key dimensions to check before ordering? Important dimensions include the 150 mm overall length, 30 mm cutting height and 32 mm cutting‑head width; these values determine reach and clearance for the intended turning task. How is the holder mounted to the toolpost? Mounting is achieved via the M10 shank bore and standard clamping interfaces; the M10 fixing helps to secure the holder and maintain repeatable cutter position during cutting. Will this holder improve insert life? The combination of a stable body, defined 30° cutting angle and secure clamping tends to reduce micro‑movement and vibration, which can contribute to more consistent tool wear and extended insert life when applied correctly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 30° SRGCR 2525 M12 for RCMT 1204 Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of the combination of precise insert compatibility, robust clamping geometry and predictable chip control for reliable turning operations; order the holder directly via Metav Werkzeuge or contact the consultants for application advice. SRGCR 2525 clamping holder — SRGC for RCMT indexable inserts, right-hand, 30° cutting angle (Teknik Makina) The SRGCR 2525 clamping holder is a right-hand turning toolholder designed for use with RCMT 1204 indexable inserts, providing stable clamping and consistent cutting geometry for external turning operations. Right-hand turning orientation Compatible with RCMT 1204 inserts 30° cutting angle for improved chip control 150 mm overall length for extended reach Consistent clamping for repeatable turning results The holder's shank height 25 mm and head width 32 mm establish a rigid interface between toolpost and cutting edge, reducing chatter and improving surface finish. The ISO designation SRGCR 2525 describes a standardised form factor that simplifies tool selection and replacement in series production. With a defined cutting height 30 mm, setup tolerances are minimised, which shortens machine downtime and supports predictable part tolerances. The result is a measurable improvement in cycle-time stability and fewer reworks when machining batches. Simple insert interchange and stable cutting geometry Designed specifically for RCMT 1204 indexable inserts, the SRGC configuration secures the insert with a proven clamping arrangement; the clamping thread is M12, allowing reliable torque application for secure seat retention. The 30° cutting angle promotes controlled chip flow and reduced cutting forces during right-hand turning, which benefits cycle time and tool life. Compatibility with common insert grades makes the holder suitable for a range of steels and non-ferrous materials when paired with the appropriate grade of insert, enabling flexible use across varied jobs. Reach and balance tuned for production lathes An overall length of 150 mm provides extended reach for operations that require access to deeper profiles or larger workpieces, while the toolholder’s weight of 0.744 kg helps maintain a balance between rigidity and dynamic response on turret or quick-change toolposts. These dimensions support efficient set-up and reduce the need for intermediate fixtures. Where repeatable positioning is critical, the SRGCR profile shortens alignment time and supports consistent centre-to-edge relation across multiple setups. Built to integrate into workshop workflows The SRGCR 2525's form factor and standardised interface simplify inventory and spare-part management for maintenance teams. As an SRGC-style toolholder, it integrates into existing tooling systems with minimal adaptation, supporting both one-off jobs and continuous production runs. If further specification is required for a particular machine or insert grade, Metav’s technical documentation and advisors can be referenced to match insert geometry, grade and cutting parameters to the application, ensuring the best compromise between productivity and component quality. For precision turning tasks that demand stable clamping and predictable chip control, order the Teknik Makina SRGCR 2525 clamping holder via Metav Werkzeuge or request tailored application advice from our consultants in Emmerich Technical data Article number: D290TM Manufacturer: Teknik Makina Product name: SRGCR 2525 clamping holder Designation: SRGC for RCMT indexable inserts Orientation: right-hand Facts Overall length: 150 mm Weight: 0.744 kg Shank height: 25 mm Head width: 32 mm Cutting height: 30 mm Cutting angle: 30° Special features Suitable for RCMT 1204 inserts ISO designation SRGCR 2525 Clamping thread: M12 FAQ Which inserts are compatible with this holder? The holder supports RCMT 1204 indexable inserts and is designed to secure these inserts reliably in the SRGC pocket. Is the toolholder for right- or left-hand turning? This toolholder is configured for right-hand turning applications; the cutting angle and pocket orientation match right-hand feeds. What are the key dimensions for setup planning? Important dimensions include an overall length of 150 mm, shank height 25 mm, head width 32 mm and a cutting height of 30 mm, which help determine reach and clamping clearance. What is the ISO designation and why is it relevant? The ISO designation SRGCR 2525 identifies the holder’s standardized form factor, aiding compatibility checks and simplifying replacement in existing tooling systems. Which clamping screw specification applies to the holder? The clamping interface uses an M12 thread for secure insert retention and consistent torque application. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 40° DCXNN 2525 M12 for CN-- 1204 Indexable Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a robust clamping concept that combines precise seating with durable construction for reliable turning operations; the compact DCXNN 2525 design, paired with compatibility for CN-- 1204 indexable inserts, supports consistent component quality and prolonged tool life — order via Metav Werkzeuge or consult our technical advisers for supply and integration. Clamping holder DCXNN 2525 — clamping holder for CN-- 1204 indexable inserts, 40/45° cutting angle (Teknik Makina) A clamping holder DCXNN 2525 designed to secure CN-- 1204 indexable inserts for stable external turning and profiling in steel machining DCXNN 2525 design for CN-- 1204 inserts 25 mm tool height for stable clamping 40/45° cutting angle compatibility M12 shank thread, 150 mm overall length Achieve consistent results with stable clamping and repeatability The DCXNN 2525 holder is engineered to provide stable clamping that translates into repeatable part geometry and reduced scrap rates. Its iso designation and compact geometry ensure a defined seating plane for the CN-- 1204 style inserts, which means the insert position remains constant from cut to cut. This mechanical consistency simplifies process control and contributes directly to lower rework and improved assembly tolerances. The combination of a solid clamping interface and precise seating supports a longer tool life for both inserts and holder. Designed for demanding steel machining and reliable reach With a nominal tool height of 25 mm and an overall length of 150 mm, the holder offers a balanced compromise between rigidity and reach for external turning tasks. The holder’s compatibility with CN-- 1204 indexable inserts and its 40/45° cutting angle make it suitable for general profiling, facing and light roughing operations in carbon and alloy steels commonly encountered in industrial workshops. The M12 thread on the mounting shank provides a standardised connection for secure attachment in a wide range of toolposts and boring bars, contributing to predictable vibration behaviour and surface finish. The measured mass of 0.756 kg aids stability without unnecessarily increasing inertia. Quick set-up, predictable maintenance and production uptime The DCXNN 2525 centrepiece was developed for straightforward handling and low maintenance in production environments. The clear insert interface reduces indexing time when turning over or replacing CN-- 1204 inserts, while the robust construction minimises the frequency of service interventions. For process engineers this translates into fewer changeovers and a more efficient shift plan. When integrated into a workshop with standard insertion procedures, the holder supports consistent cycle times and contributes to an optimised production flow. For further specification checks or integration advice, technical documentation and images are available on request. Contact Metav Werkzeuge for tailored technical advice on integrating the Teknik Makina clamping holder DCXNN 2525 into existing turning setups and to secure supply directly from Emmerich Technical data Article number: D216TM Manufacturer: Teknik Cutting Tools (Teknik Makina) Facts Overall length: 150 mm Tool height: 25 mm Tool width: 25 mm Cutting head width: 12.5 mm Cutting height: 35 mm Cutting angle: 40° Weight: 0.756 kg Shank/thread: M12 Compatible inserts: CN-- 1204 eClass: 21181004 Special features ISO designation: DCXNN 2525 For DCXNN and DCSNR indexable insert types Suited to external turning and profiling operations Robust steel construction for long service life FAQ What insert types fit this holder? The holder is specified for CN-- 1204 indexable inserts; the DCXNN 2525 seating takes standard CN-- 1204 geometries. Is the holder suitable for external turning in steel? Yes — the geometry and clamping stability make the holder well suited to steel machining operations and standard workshop turning tasks. What mounting thread does the tool use? The holder uses an M12 shank/thread for attachment, offering compatibility with many standard toolposts and bar adaptors. Can the clamping holder be used for profiling and facing? The 40/45° cutting angle and the DCXNN 2525 design support profiling and facing operations, delivering controlled chip flow and stable cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Klemmhalter 45° DCSNR 2525 M12 for CN-- 1204 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, ISO‑specified turning solution that combines secure clamping, a controlled 45° engagement and a standard M12 clamping screw for repeatable results; order the clamping holder directly via Metav Werkzeuge or consult our specialists for application advice. DCSNR 2525 clamping holder — right‑hand external turning, 45° cutting angle (Teknik Makina) The DCSNR 2525 is a robust right‑hand external turning toolholder designed for precision machining with CN-- 1204 indexable inserts, suited to conventional and production turning applications Right‑hand external turning holder 45° cutting angle for controlled engagement Compatible with CN-- 1204 indexable inserts M12 clamping screw, 150 mm overall length High repeatability from a compact clamping design The turning toolholder offers consistent seating and secure clamping thanks to its ISO designation and a standardised clamping interface. With a 45° cutting angle the toolholder reduces radial shock and promotes steady chip evacuation, which translates into improved surface finish and reduced rework. The DCSNR 2525 specification aligns with common workshop tooling standards, enabling straightforward set‑ups on lathes and turning centres and reducing changeover time between jobs. Precision dimensions that support predictable toolpaths Engineered for controlled engagement, the holder presents a 35 mm cutting height and a compact head width of 32 mm, providing stable support for the insert during heavy cuts. The body measures 150 mm overall length with a holder width and height of 25 mm, balancing rigidity and accessibility in cramped toolposts. Weighing 0.774 kg, the assembly is easy to handle while remaining stiff enough to minimise vibration, which helps to maintain tolerances and repeatability across serial production. Practical compatibility and straightforward maintenance Compatibility with CN-- 1204 indexable inserts and a common M12 clamping screw simplifies stock handling and replacement cycles. The right‑hand orientation is specified for external turning operations where directional control of chip flow and tool approach are critical. This toolholder is suitable for workflows that prioritise operational efficiency and predictable tool life, offering a pragmatic solution for workshops that seek to standardise their turning fixtures without complex retrofits. Discuss the Teknik Makina DCSNR 2525 with Metav Werkzeuge to confirm fitment and optimise tooling choices — contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and fast dispatch Technical data Article number: D218TM Manufacturer: Teknik Makina Facts Overall length: 150 mm Weight: 0.774 kg Cutting height: 35 mm Head width: 32 mm Holder width: 25 mm Holder height: 25 mm Cutting angle: 45° Clamping screw thread: M12 Special features ISO designation: DCSNR 2525 For indexable inserts: CN-- 1204 Right‑hand external turning Robust clamping interface for repeatable seating FAQ What insert size does this holder accept? The DCSNR 2525 is designed for CN-- 1204 indexable inserts, matching the insert form and seat geometry for reliable clamping. Is the holder suitable for right‑hand turning only? Yes, the toolholder is specified for right‑hand external turning operations and provides the intended chip flow and approach for that direction. Which clamping screw is required for assembly? Assembly uses an M12 clamping screw as part of the clamping mechanism for secure insert retention. What are the key dimensions to check for fitting in a toolpost? Relevant dimensions include the 150 mm overall length, 25 mm holder width, 25 mm holder height and the 32 mm head width to ensure correct toolpost clearance. Can the DCSNR 2525 be used in production turning centres? Yes, the ISO format and robust clamping make the holder suitable for production environments that use standard CN-- 1204 inserts and require repeatable, stable toolholding. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 45° DSSNR 4040 S19 für SNMG 1906 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Benefit from a robust combination of precise insert compatibility, stable clamping and extended reach for consistent turning results; the DSSNR 4040 toolholder brings repeatable performance to serial and single-part production. Order the tool directly via Metav Werkzeuge or consult the specialists for application-specific advice. Klemmhalter — DSSNR 4040 right-hand turning toolholder with 45° cutting angle by Teknik Makina Klemmhalter is a right-hand toolholder designed for versatile turning with SNMG indexable inserts, suited to CNC lathes and shopfloor production where stability and predictable chip control are required. Right-hand turning holder for SNMG inserts 45° cutting angle for versatile turning Overall length 250 mm for deep reaches Robust 3.123 kg construction for stability Improved cycle times through predictable cutting performance The DSSNR 4040 designation identifies a purpose-built clamping solution for SNMG 1906 indexable inserts, offering a consistent 45° cutting angle that balances metal removal and finish quality. The combination of a defined rake geometry and a secure clamping seat reduces vibration and stabilises the cutting edge, which in practice leads to more repeatable cycle times and reduced scrap rates. For production environments that prioritise throughput, this stability enables higher feeds without sacrificing surface integrity, making it an efficient choice for both roughing and light finishing passes. Stable construction and reach for deeper turning tasks A compact head and a long shank translate into tangible workshop benefits: the head width of 40 mm, holder width of 50 mm and an overall length of 250 mm provide the reach required for deeper bores and extended overhangs while maintaining rigidity. The substantial mass (approx. 3.123 kg) and the defined cutting height of 46 mm work together to dampen chatter and improve dimensional stability. In practice, these design choices reduce tool deflection and help to preserve insert life, which contributes to lower tooling costs over longer production runs. Secure clamping and straightforward integration into tool setups The clamping concept is tailored for SNMG 1906 inserts and the ISO designation DSSNR 4040 aids quick identification when configuring tool turrets. The holder is intended for right-hand cutting direction and integrates with a shank designation of S19, allowing consistent repeatability in multi-station setups. Because the design focuses on repeatable seating and firm mechanical fixation, insert indexing and replacement are fast and predictable—benefits that reduce downtime during changeovers and support high-availability manufacturing. Speak with Metav Werkzeuge today to specify the DSSNR 4040 clamping holder for the intended application and benefit from reliable supply and technical guidance from our Emmerich location. Technical Data Article number: D207TM Brand: Teknik Makina Product: Klemmhalter (DSSNR for SNMG Indexable Inserts) ISO designation: DSSNR 4040 Facts Overall length: 250 mm Holder width: 50 mm Cutting head width: 40 mm Holder height: 40 mm Cutting height: 46 mm Cutting angle: 45° Weight: 3.123 kg Cutting direction: right Special features Compatible with SNMG 1906 indexable inserts Shank designation: S19 Right-hand turning toolholder SKU: D207TM Manufacturer: Teknik Makina FAQ Which insert size is compatible with this toolholder? The Klemmhalter is designed for SNMG 1906 indexable inserts; use inserts matching that size for correct seating and clamping. What is the intended cutting direction for the holder? The holder is configured for right-hand cutting direction, optimised for standard lathe orientations. How does the holder support repeatable set-ups? The DSSNR 4040 designation and firm clamping seat ensure repeatable insert location and quick indexing, which improves setup consistency across machines. Is the holder suitable for extended overhangs? With an overall length of 250 mm and a robust build, the Klemmhalter provides reach for deeper turning while maintaining rigidity for many shop applications. What identification should be used when ordering spare holders or matching inserts? Refer to the ISO designation DSSNR 4040, compatible insert type SNMG 1906, and SKU D207TM to ensure the correct item is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 45° PSSNL 2020 K12 for SNMG 1204 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Take advantage of robust clamping, a compact 20 mm shank and a precise 45° cutting geometry for dependable turning operations; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. PSSN for SNMG Indexable Inserts — PSSNL 2020 by Teknik Makina (left-hand, 45° cutting angle) The PSSN for SNMG Indexable Inserts is a left-hand turning toolholder designed for secure clamping of SNMG 1204 inserts, optimised for stable chip control and predictable turning performance in industrial workshops. Left-hand turning orientation Compatible with SNMG 1204 inserts 45° cutting geometry for consistent chip flow Compact 20 mm shank for stable mounting Precision clamping for consistent turning quality The holder delivers reliable clamping and consistent tool positioning, which reduces vibration and contributes to repeatable surface finishes. Its 45° cutting geometry is designed to improve chip evacuation and maintain cutting forces within predictable limits; this helps to extend insert life and to lower rework rates. By specifying a holder with defined dimensions and geometry, machinists obtain a stable cutting system that supports efficient, process-oriented production. Optimised dimensions for workshop integration and quick set-up With a 20 mm shank, 25 mm head width and 125 mm overall length, the toolholder fits compact toolposts while offering sufficient overhang for typical turning tasks. The modest mass of 0.416 kg aids balance and reduces spindle load during higher-speed operations. These measurable attributes enable planners to integrate the holder into existing setups without major adjustments, shortening setup time and enabling faster switchovers between operations. Clear compatibility and mounting guidance for safe use The device carries the ISO designation PSSNL 2020 and is intended for SNMG 1204 indexable inserts, using the K12 bore specification for insertion and clamping. It is a left-hand toolholder, which means the cutting action is oriented for left-hand turning on the lathe; this should be selected when machining directions and part geometry require opposite tool approach. The defined geometry and standardised interface simplify tool selection and spare-part management across production lines. For application-specific recommendations or to secure the PSSN toolholder from Teknik Makina for your workshop, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich. Technical data Article number: P181TM Manufacturer: Teknik Makina Shank width: 20 mm Head width: 25 mm Holder height: 20 mm Cutting height: 30 mm Overall length: 125 mm Weight: 0.416 kg Cutting angle: 45° ISO designation: PSSNL 2020 For indexable inserts: SNMG 1204 Mounting bore: K12 Cutting direction: left-hand FAQ What inserts fit this holder? The PSSN clamping holder is specified for SNMG 1204 indexable inserts and secures them via the K12 mounting interface. Is this a left-hand or right-hand toolholder? This toolholder is supplied in a left-hand orientation; it is intended for left-hand turning operations on suitable lathes. What is the ISO designation and why is it relevant? The ISO designation PSSNL 2020 identifies the holder geometry and interface, ensuring compatibility with standardised toolposts and spare parts. Will the holder fit compact toolposts? Yes; the 20 mm shank and 125 mm overall length provide a compact footprint that integrates easily with most workshop toolpost arrangements. How does the 45° cutting angle benefit machining? A 45° cutting geometry promotes steady chip flow and more uniform cutting forces, which can improve insert life and surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 45° PSSNL 2525 M12 for SNMG 1204 Indexable Inserts Innenkühlung Linksschneidend - Teknik Makina
Take advantage of a robust left‑hand turning solution that combines precise insert clamping with a compact 150 mm overall length for tight setups; its PSSNL 2525 geometry and 25 mm clamp height ensure repeatable seating of SNMG 1204 inserts — order the clamping holder directly via Metav Werkzeuge or ask our consultants if needed PSSN for SNMG Indexable Inserts (PSSNL 2525) – Left‑hand clamping holder by Teknik Cutting Tools The PSSN for SNMG Indexable Inserts is a left‑hand clamping holder designed for turning applications that require secure seating of SNMG 1204 inserts in confined toolpost arrangements. Left‑hand orientation for reverse turning Secure seating for SNMG 1204 inserts Compact overall length of 150 mm 25 mm clamp height for stable support Consistent insert clamping for reliable turning results The toolholder is engineered to deliver repeatable clamping so that insert seating remains consistent from part to part. With a 25 mm clamp height and a dedicated pocket for SNMG 1204 inserts, the design reduces micro‑movement during cut entry and exit. A precise clamping interface minimises vibration and contributes to improved surface finish and tool life. The 45° cutting angle is optimised for general turning operations, balancing chip flow and machining forces to support steady material removal. Efficient left‑hand configuration for specific workflow needs Built as a left‑hand solution, this holder suits reversing operations and setups where the cutting direction must be mirrored. The left‑hand orientation and the compact 150 mm overall length enable insertion into constrained tool posts and turret stations without compromising accessibility. The 32 mm cutting head width and 30 mm cutting height are chosen to maintain appropriate overhang and rigidity, which supports higher feed rates and consistent part tolerances in production environments. Compatibility that simplifies tooling management Compatibility with standard SNMG 1204 indexable inserts means fewer special items in inventory and easier tool changes on the shop floor. The holder accepts a common M12 mounting interface for secure attachment and weighs approximately 0.742 kg, offering a balance between robustness and manageable handling during tool changes. This pragmatic matching of holder geometry to insert format reduces setup time and supports predictable machining performance across batches. Practical design for workshop ergonomics and maintenance The holder’s geometry — referenced as PSSNL 2525 in ISO designation — focuses on straightforward maintenance and minimal adjustment. A clear clamp profile speeds insert replacement, while the resilient mechanical interface keeps retightening needs low. The combination of compact dimensions and stable clamping helps to lower the likelihood of rework and supports continuous production runs with fewer interruptions, an advantage for both craft workshops and small production cells. For reliable left‑hand turning with Teknik Cutting Tools’ PSSNL 2525 clamping holder, contact Metav Werkzeuge in Emmerich for purchase and personalised technical advice: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P182TM Model (ISO): PSSNL 2525 Product: PSSN for SNMG Indexable Inserts Brand: Teknik Makina Facts Clamp height: 25 mm Cutting head width: 32 mm Cutting height: 30 mm Overall length: 150 mm Weight: 0.742 kg Cutting angle: 45° Mounting thread: M12 Special features Left‑hand cutting direction Suitable for SNMG 1204 inserts Compact toolholder for tight setups Secure clamping geometry for repeatability FAQ What insert grade and size fit this holder? The PSSN for SNMG Indexable Inserts is designed for SNMG 1204 format inserts; matching insert grades should be chosen according to material and cutting conditions. Is the holder suitable for reverse turning operations? Yes, the left‑hand orientation of this clamping holder makes it suitable for reverse or left‑hand turning tasks. What are the key dimensions to check for turret compatibility? Check the 25 mm clamp height, 150 mm overall length, and the 32 mm cutting head width to ensure compatibility with the turret or toolpost. How does the clamp geometry affect surface finish? The secure clamping and precise seating of SNMG inserts reduce micro‑movement and vibration, which helps to improve surface finish and repeatability. Can standard M12 mounting be used on most toolposts? The holder uses an M12 mounting interface for attachment; compatibility depends on the toolpost or adapter design. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Klemmhalter 45° PSSNR 1616 H12 For SNMG 1204 Indexable Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, ISO-defined clamp holder that combines a 45° cutting angle with compatibility for SNMG 1204 inserts to improve turning accuracy and cycle-time stability. For purchase or technical advice, order via Metav Werkzeuge or consult our product specialists. PSSN for SNMG Indexable Inserts — PSSNR 1616 clamp holder with 45° cutting angle (Teknik Makina) PSSN for SNMG Indexable Inserts is a right-hand clamp holder designed for SNMG 1204 turning inserts, delivering controlled chip flow and secure clamping in medium-duty turning operations. 45° cutting angle for precise turning Compatible with SNMG 1204 inserts ISO PSSNR 1616 shank, 16 x 16 mm 100 mm overall length, 0.218 kg weight Improved cutting stability and surface finish with a 45° geometry The 45° geometry of this clamp holder provides a balanced combination of radial and axial force components that lead to consistent chip control and a finer surface finish on turned parts. Designed for SNMG 1204 inserts, the toolholder aligns the insert pocket for optimal shear and minimised vibration, which reduces rework and increases first-pass yield. With a cutting height of 30 mm and a cutting head width of 20 mm, the construction supports stable engagement depths while preserving insert life. Where cycle-time efficiency and repeatable results are priorities, this configuration delivers measurable gains in productivity. Quick set-up and secure clamping for repeatable machining The holder meets the ISO designation PSSNR 1616, featuring a compact 16 mm shank height and width that make it easy to fit common toolposts and turrets. Compatibility with the H12 boring-bar designation streamlines replacement and stock management. At 0.218 kg, the balanced mass minimises centrifugal effects at speed and helps maintain tool geometry under load. The secure clamping system and standardised interface reduce set-up time and make insert indexing straightforward, translating into lower downtime and predictable process performance. Integration into the workshop and reliable daily use Built for routine shop-floor demands, the right-hand orientation and 100 mm overall length support common turning tasks while keeping overhang moderate for rigidity. The holder’s robust design ensures dependable behaviour across batch and single-part work, enabling confident selection for production or maintenance cycles. For operations aiming to harmonise tooling across machines, the combination of ISO conformity and SNMG 1204 compatibility simplifies logistics and training. The toolholder is a practical choice where durability and straightforward integration are valued. For a tailored recommendation on integrating this Teknik Cutting Tools clamp holder into existing tool chains, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for expert guidance and fast supply. Technical data Article number: P170TM Manufacturer: Teknik Makina Product designation: PSSN for SNMG Indexable Inserts Facts Cutting angle: 45° Shank height: 16 mm Shank width: 16 mm Cutting head width: 20 mm Cutting height: 30 mm Overall length: 100 mm Weight: 0.218 kg Cutting direction: right Compatible inserts: SNMG 1204 Special features ISO designation: PSSNR 1616 Boring-bar designation: H12 Right-hand orientation For SNMG 1204 indexable inserts FAQ Which inserts fit this clamp holder? The holder is designed for SNMG 1204 indexable inserts; insert geometry must match the SNMG 1204 specification for correct seating and clamping. What is the ISO designation and shank size? The tool is specified as ISO PSSNR 1616 with a 16 x 16 mm shank, suitable for standard toolposts accepting that format. Is the holder for right- or left-hand turning? This clamp holder is configured for right-hand cutting direction, optimised for standard right-hand turning operations. What are the key dimensions that affect rigidity? Key dimensions are the 100 mm overall length, 16 mm shank, 20 mm cutting head width and a 30 mm cutting height, which together determine overhang and stiffness. Can this holder reduce set-up time in production cells? The ISO interface (PSSNR 1616) and H12 boring-bar designation simplify mounting and replacement, helping to reduce set-up time and improve repeatability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 45° PSSNR 2525 M12 for SNMG 1204 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact right‑hand toolholder that delivers secure clamping for SNMG inserts, a practical 45° cutting angle and straightforward M12 mounting — all designed to keep turning operations efficient and repeatable. Order directly via Metav Werkzeuge or consult our team for application advice. Teknik Makina PSSN for SNMG Indexable Inserts — right‑hand turning holder with 45° angle PSSN for SNMG Indexable Inserts is a right‑hand turning toolholder engineered for secure clamping of SNMG 1204 inserts in general workshop and industrial turning applications. Secure clamping for SNMG 1204 inserts 45° cutting angle for versatile turning ISO PSSNR 2525 for standardised fitment M12 mounting thread for common toolposts Improved process stability for consistent turning results The PSSN style holder is designed to increase rigidity at the cutting zone and reduce vibration during interrupted or continuous cuts. Its 45° cutting angle helps to distribute cutting forces more evenly across the insert, which often results in smoother surface finishes and prolonged insert life. For operations that demand repeatable outcomes, this type of clamping brings measurable benefits in cycle stability and tool life, helping to lower overall production costs through fewer change‑overs and less scrap. Fast, reliable set‑up and standardised compatibility With an M12 mounting thread and the ISO designation PSSNR 2525, the toolholder fits common toolpost systems and aligns with industry standards to simplify tooling logistics. The combination of a 30 mm cutting height and 150 mm overall length provides a predictable tool geometry that makes set‑up quicker and tool offsets easier to manage. The holder’s dimensions and ISO conformity reduce the need for bespoke adaptors, shortening preparation times and enabling faster changeovers at the machine. Practical shop‑floor advantages and suitability Engineered for use with SNMG 1204 indexable inserts, the holder offers a compact footprint with a 0.742 kg mass that balances stiffness with manageable handling during tool changes. The right‑hand orientation makes it suitable for standard right‑hand turning tasks; compatibility with SNMG inserts keeps inventory lean because commonly used insert grades cover a wide range of materials and cutting conditions. Sourcing through Metav ensures dependable availability and professional product support for industrial and craft environments. Speak with Metav Werkzeuge to align the Teknik Cutting Tools PSSN holder with specific turning processes and check stock or delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P172TM Manufacturer: Teknik Makina Core dimensions Overall length: 150 mm Cutting height: 30 mm Holder height: 25 mm Head width: 32 mm Holder width: 25 mm Weight: 0.742 kg Cutting angle: 45° Cutting direction: right Features & compatibility ISO designation: PSSNR 2525 Mounting thread: M12 Suitable for: SNMG 1204 indexable inserts Orientation: right‑hand FAQ Which inserts fit this holder? The holder is designed for SNMG 1204 indexable inserts and accepts standard SNMG geometries for turning applications. Is the PSSN holder suitable for heavy cuts? The PSSN for SNMG indexable inserts offers enhanced rigidity and a 45° geometry that is suitable for many medium to heavy turning tasks when matched with the correct insert grade. What does the ISO designation PSSNR 2525 mean? PSSNR 2525 denotes the holder style and square shank dimensions according to common ISO conventions, ensuring interchangeability with compatible toolposts. Can this holder be used for left‑hand turning? This specific version is a right‑hand orientation; left‑hand operations require the corresponding left‑hand variant. How does the 45° cutting angle affect tool life? A 45° approach angle spreads cutting forces across the insert, which can reduce edge loading and improve insert life and surface finish when cutting parameters are optimised. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 50° DCMNN 2020 K12 For CN-- 1204 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, ISO‑compliant clamping solution that pairs robust DCMNN 2020 construction with precise 50° cutting geometry, ensuring steady performance with CN-- 1204 indexable inserts and smooth integration into live tooling. Order via Metav Werkzeuge or consult the specialists for application advice. Klemmhalter DCMNN 2020 – DCMNN for CN-- 1204 indexable inserts, 50° cutting angle (Teknik Makina) A Klemmhalter DCMNN 2020 designed for turning and finishing operations where a 50° cutting geometry and space-saving overall length support consistent, repeatable results with CN-- 1204 indexable inserts. 50° cutting geometry Compatible with CN-- 1204 inserts Overall length 125 mm ISO DCMNN 2020 design Consistent chip control with a defined cutting geometry The clamping system is engineered around a 50° cutting angle, which stabilises the cutting forces and improves chip formation in interrupted and continuous cuts. With a DCMNN 2020 configuration matched to CN-- 1204 indexable inserts, the holder ensures the insert sits at the intended geometry so that tool life and surface finish remain consistent across batches. For operations where predictability and reproducibility matter, this toolholder reduces set‑up variation and supports efficient cycle times. Space‑efficient toolholder for tight toolposts A compact footprint helps when multiple tools are required on a turret or when space is limited in smaller lathes. The holder offers an overall length of 125 mm with a holder height of 20 mm and a holder width of 20 mm, while the head width of 10 mm allows close tool spacing without compromising rigidity. The relatively low mass (0.445 kg) contributes to stable dynamics at operational speeds and makes handling and storage straightforward for the workshop. Secure clamping and ISO compatibility for simple logistics Built to the ISO DCMNN 2020 profile, the toolholder accepts industry‑standard inserts and benefits from proven clamping geometry and repeatable positioning. The specified interface aligns with the K12 shank reference, streamlining compatibility checks when configuring tooling sets. Using standardised components reduces inventory complexity and supports faster changeovers during shift work or batch changes, contributing to reliable production flow. For procurement guidance or application-specific recommendations on Teknik Cutting Tools holders, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com — the Metav team will advise on the optimal clamping holder for the intended machining task Technical data Article number: D214-1TM Manufacturer: Teknik Makina Designation: DCMNN for CN-- 1204 indexable inserts ISO designation: DCMNN 2020 SKU: D214-1TM Core figures Overall length: 125 mm Holder height: 20 mm Holder width: 20 mm Head width: 10 mm Cutting angle: 50° Cutting height: 35 mm Weight: 0.445 kg Special features For indexable inserts: CN-- 1204 Shank/version reference: K12 ISO compliant clamping geometry: DCMNN 2020 FAQ What inserts fit this toolholder? The clamping holder is designed for CN-- 1204 indexable inserts; the DCMNN 2020 pocket geometry secures the insert at the correct orientation for the specified 50° cutting angle. Is the holder suitable for tight turret spacing? Yes, the compact 125 mm overall length and 10 mm head width make this toolholder well suited to close tool arrangements on multi‑station turrets. How does the cutting angle affect machining? The 50° cutting geometry alters force direction and chip flow, which can improve surface finish and reduce vibration in many turning applications when paired with the correct CN-- 1204 insert. Can this holder be used with standard ISO tool inventory? The holder follows the ISO DCMNN 2020 specification, which allows straightforward integration with standard insert families and shank references such as K12. What are the basic mounting dimensions to check before purchase? Refer to the core figures: overall length 125 mm, holder height 20 mm, holder width 20 mm, and head width 10 mm to ensure compatibility with the machine tool and turret layout. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 60° MTENN 2020 K16 for TN-- 1604 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, high-stability clamping solution: the combination of a 60° cutting angle and a rigid 20 x 20 mm shank ensures consistent machining results and low deflection. Order the holder directly via Metav Werkzeuge or consult our precision team for application-specific advice. Klemmhalter MTENN 2020 – 60° clamping holder for TN-- 1604 indexable inserts by Teknik Makina The Klemmhalter MTENN 2020 is a 60° clamping holder designed for secure mounting of TN-- 1604 indexable inserts in small to medium toolposts, offering compact dimensions for tight setups 60° cutting angle for robust machining Compatible with TN-- 1604 indexable inserts Compact 20 x 20 mm shank dimensions Stable cutting performance through defined geometry The holder's 60° geometry delivers a reliable cutting orientation that supports predictable chip flow and reduced vibration during engagement. As a consequence of the defined geometry, the toolholder provides repeatable contact conditions for the insert, which can improve surface finish and tool life. The design is oriented towards consistent machining performance in workshop and small-series production environments, where repeatability and process stability are valued. Rigid shank and compact dimensions for versatile mounting With a 20 x 20 mm shank and an overall length of 125 mm, the toolholder combines rigidity with compactness to fit limited toolpost space. The narrow cutting-head width of 10 mm and a cutting height of 35 mm reduce overhang and limit deflection, enabling more accurate machining on delicate components. The moderate mass of 0.408 kg contributes to stable dynamic behaviour without unnecessary inertia, supporting faster acceleration and deceleration in CNC cycles. Clear compatibility and workshop integration Marked as MTENN 2020 (ISO designation), the holder is specified for TN-- 1604 indexable inserts and carries a bore designation K16, simplifying selection and replacement. The configuration makes retrofitting into existing setups straightforward when matching insert form and clamping geometry. Supplied as a standard toolholder for indexable inserts, it aligns with common workshop workflows and reduces setup time when switching inserts or tools. For enquiries about availability, application suitability or to arrange supply of the Teknik Makina MTENN 2020 clamping holder, contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com — our precision team in Emmerich will advise on selection and delivery. Technical Data SKU: D108TM Manufacturer: Teknik Makina Type / designation: MTENN 2020 Article name (EN): MTENN for TN-- Indexable Inserts Facts Cutting angle: 60° Shank height: 20 mm Shank width: 20 mm Cutting-head width: 10 mm Cutting height: 35 mm Overall length: 125 mm Weight: 0.408 kg Special features Compatible with TN-- 1604 indexable inserts Bore designation: K16 ISO designation: MTENN 2020 FAQ What inserts fit this holder? The holder accepts TN-- 1604 indexable inserts; the MTENN 2020 clamping geometry is tailored to that insert form for secure seating and repeatable performance. Is the MTENN 2020 suitable for small toolposts? Yes, the compact 20 x 20 mm shank and 125 mm overall length make the MTENN 2020 (Teknik Makina, SKU D108TM) suitable for installations with limited clearance. Which cutting angle does the holder provide? The toolholder is specified with a 60° cutting angle, which gives a defined cutting orientation that supports stable machining and predictable chip control. How does the holder affect machining accuracy? Reduced overhang from the compact head (10 mm width) and a rigid shank help minimise deflection; the MTENN 2020’s geometry contributes to consistent contact conditions and improved repeatability. What designation should be ordered to ensure compatibility? Order the MTENN 2020 clamping holder (SKU D108TM) and specify compatibility with TN-- 1604 inserts; note the bore designation K16 when confirming fitment. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 60° MTENN 3232 P22 for TN-- 2204 Indexable Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of the robust clamping, precise 32 x 32 mm shank and 170 mm overall length for stable turning operations; order via Metav Werkzeuge or contact the consultants for application advice. MTENN 3232 Clamping Tool Holder — 32 x 32 mm Shank, 170 mm Overall Length — Teknik Makina The MTENN for TN-- Indexable Inserts is a heavy-duty clamping tool holder designed for turning applications, compatible with TN--2204 inserts and offering a 60° cutting angle for controlled chip flow. 32 x 32 mm shank for stable clamping 170 mm overall length for deep reach Compatible with TN--2204 indexable inserts 60° cutting angle for accurate turning Consistent clamping for repeatable turning quality The tool holder delivers reliable clamping thanks to its square 32 x 32 mm shank and the ISO designation MTENN 3232, which together ensure a rigid connection to the turret or toolpost. The cutting height of 40 mm and the compact cutting-head width of 16 mm position the insert correctly for turning tasks, reducing chatter and improving surface finish. For production environments where reproducibility is key, the clamping geometry minimises setup variation and supports consistent part tolerances. Designed dimensions that extend machining reach without compromising stability With an overall length of 170 mm and a mass of 1.311 kg, this holder balances accessibility and stiffness for medium-reach turning operations. The elongated body enables access to recessed features while the solid construction preserves cutting stability. The specified 60° cutting angle assists in directing chips away from the workpiece and tool, which can reduce rework and increase cycle-time efficiency when paired with appropriate inserts. Compatibility, handling and practical benefits for workshops Intended for use with TN--2204 indexable inserts and identified by the shank designation P22, the holder integrates smoothly into conventional lathe tool setups and CNC turret systems. The clamping system secures the insert reliably, simplifying index changes and minimising downtime. Technical staff unfamiliar with specific terminology will find the design straightforward: it is a clamping tool holder for indexable inserts that trades simple handling for measurable productivity gains. Contact Metav Werkzeuge for tailored advice on using the MTENN 3232 clamping tool holder from Teknik Makina and to request a quotation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D113TM Manufacturer: Teknik Makina ISO designation: MTENN 3232 SKU: D113TM Facts Overall length: 170 mm Shank: 32 x 32 mm Cutting-head width: 16 mm Cutting height: 40 mm Weight: 1.311 kg Cutting angle: 60° Applications & features MTENN for TN-- Indexable Inserts (bezeichnung_2_en) Suitable inserts: TN--2204 Shank designation: P22 Clamping tool holder for turning operations FAQ Which indexable inserts fit this tool holder? The MTENN 3232 clamping tool holder is specified for TN--2204 indexable inserts, ensuring correct seat geometry and secure clamping for turning tasks. What are the key dimensions to check for turret compatibility? Check the 32 x 32 mm shank and 170 mm overall length; the MTENN 3232 and its P22 shank designation determine fitment to most standard turrets and toolposts. Is this holder suitable for CNC lathe use? Yes, the solid design and ISO MTENN 3232 format make it suitable for CNC turret systems where TN--2204 inserts are accepted and a 60° cutting angle is required. How does the cutting angle affect performance? The 60° cutting angle promotes controlled chip formation and reliable cutting forces, which helps to improve surface finish and tool life when combined with the correct insert type. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Klemmhalter 62.5° DDNNN 2020 K15 for DN-- 1506 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Benefit from a precise 62.5° cutting geometry, compatibility with DN-- 1506 indexable inserts and a compact 125 mm overall length for efficient toolholding — order the clamp holder directly via Metav Werkzeuge or ask our consultants for configuration advice. Clamp holder DDNNN 2020 by Teknik Cutting Tools — 62.5° geometry, DN-- 1506 compatibility Clamp holder DDNNN 2020 for secure seating of DN-- 1506 indexable inserts; designed for turning operations where repeatable clamping and short setup are essential. 62.5° cutting geometry for controlled chip flow Compatible with DN-- 1506 indexable inserts 20 mm clamping height for standard toolpost interfaces Compact 125 mm overall length for tight setups Consistent toolholding reduces rework and downtime A stable clamping system is the foundation of predictable machining. The DDNNN 2020 configuration combines a defined 62.5° approach angle with a robust body to ensure the insert seat remains unchanged across repeated tool exchanges. This stability translates into fewer manual adjustments, reduced scrap and a higher first-pass yield. The compact construction contributes to a lower moment load on the toolpost, helping to preserve alignment and surface finish during medium-duty turning applications. Quick indexable insert changes for efficient workshop flow Toolchange speed is a direct contributor to productive turnaround. The holder’s geometry and ISO designation make it suitable for the widely used DN-- 1506 insert family, allowing technicians to swap inserts rapidly without complicated re-setting procedures. As the clamping arrangement is tailored to standard inserts, set-up is straightforward and repeatable, which lowers machine idle time and simplifies inventory planning for inserts. Engineered dimensions that suit common lathe toolposts Key dimensions are aligned with typical workshop standards: a 20 mm clamping height, a body width of 20 mm and a cutting-head width of 10 mm, together with an overall length of 125 mm and a modest mass of 0.404 kg. These proportions balance accessibility and stiffness: the holder is long enough for reach into confined work but compact enough to limit overhang. For operations where tool access or clearance is restricted, this profile offers a practical compromise between reach and rigidity. Durable design for dependable performance Materials and manufacturing tolerances are selected to maintain seat accuracy and resist wear from repeated insert changes. The ISO-style designation and the precise seat geometry support a consistent cutting line, which helps to prolong insert life and reduces the need for frequent regrinding or replacement. For workshops aiming to standardise tooling across machines, this holder provides a reliable interface that supports predictable process control. For specification matching, ordering or a tailored recommendation on inserting sizes and clamping accessories, please contact Metav Werkzeuge — our advisors will match the right holder configuration to each machining task. Technical data Article number: D104TM Brand: Teknik Cutting Tools ISO designation: DDNNN 2020 Facts Clamping height: 20 mm Body width: 20 mm Cutting-head width: 10 mm Cutting angle: 62.5° Overall length: 125 mm Weight: 0.404 kg Special features Compatible inserts: DN-- 1506 Designed for DDNNN indexable insert format Shank designation reference: K15 Suitable for standard lathe toolposts FAQ What inserts fit this holder? The clamp holder is compatible with DN-- 1506 indexable inserts and is built to the DDNNN 2020 interface standard, ensuring a secure fit for that insert family. Is the geometry suitable for finishing cuts? Yes, the 62.5° cutting geometry of this holder favours controlled chip formation and can support finishing operations when paired with the appropriate DN-- 1506 grade inserts. What are the key dimensions to check before ordering? Verify the clamping height (20 mm), overall length (125 mm) and cutting-head width (10 mm) to ensure the holder fits the machine’s toolpost and provides the required reach. Can this holder be used across different machines? The holder’s ISO designation and standardised shank reference (K15) make it suitable for use on machines that accept DDNNN-style toolholders and DN-- 1506 inserts. How heavy is the toolholder and does it affect balance? The device weighs 0.404 kg; its compact mass and length reduce overhang moment and help maintain toolpost balance in typical turning applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 62.5° DDNNN 2525 M11 For DNMG 1104 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Rely on the combination of robust clamping, a compact 150 mm length and compatibility with DNMG 1104 inserts for stable, repeatable turning operations; order directly via Metav Werkzeuge or consult the team for precise selection. Klemmhalter DDNNN 2525 – Indexable‑Insert Holder (25 × 25 mm, 150 mm) by Teknik Makina A robust clamping holder, the Klemmhalter DDNNN for DN-- 1506 indexable inserts secures DNMG 1104 inserts for precision turning with a compact 150 mm overall length. Compatible with DNMG 1104 inserts 25 × 25 mm shank for high rigidity 150 mm overall length for compact setups Cutting height 38 mm for correct insert alignment Secure clamping for consistent machining results The holder provides a rigid 25 × 25 mm shank that stabilises the cutting edge and reduces vibration during turning. Built to the DDNNN 2525 ISO form, the design ensures a defined geometry at the tool tip, maintaining repeatable radial and axial positions. A defined cutting angle of 62.5° aligns the insert for predictable chip flow and surface finish. These attributes translate into fewer rejects and less rework, supporting a steady production flow with measurable process reliability. Fast insert changes and positive locking for minimal downtime Compatibility with DNMG 1104 inserts and a dedicated U‑plate (TA030) enable quick, secure insert seating. The clamping arrangement uses a clamping screw M5 and an U‑plate screw M4x11, combined with the supplied clamp block identification BK024, to provide positive retention during heavy cuts. This arrangement reduces setup time and simplifies maintenance, as insert replacement and re‑torquing are straightforward and accessible even on busy shop floors. Compact, workshop‑friendly dimensions that maintain stiffness A total length of 150 mm and overall height of 25 mm make the holder suitable for tight toolposts while maintaining sufficient leverage for stable cutting. With a cutting head width of 25 mm and a cutting height of 38 mm, the geometry is optimised for correct insert support and secure clamping. The unit’s mass of 0.7 kg contributes to damping without adding unnecessary bulk, so the holder integrates easily into conventional lathe setups and multi‑station turrets. Built for reliability and supported distribution Manufactured by Teknik Makina, the holder follows industry norms for indexable‑insert tooling and is delivered ready for workshop integration. The straightforward mechanical concept—defined ISO form, standard screws and plates—means predictable service life and easy part replacement. Metav’s distribution and quality filter in Emmerich further ensures consistent availability and traceable supply chains, which helps maintain production schedules and reduces procurement complexity. For personalised advice on toolpost compatibility or to order the Klemmhalter DDNNN 2525 from Teknik Makina, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com to confirm the right configuration for the application. Technical data Article number: D103TM Manufacturer: Teknik Makina ISO designation: DDNNN 2525 Compatible inserts: DNMG 1104 SKU: D103TM Facts Shank width: 25 mm Shank height: 25 mm Cutting head width: 25 mm Cutting height: 38 mm Overall length: 150 mm Overall height: 25 mm Cutting angle: 62.5° Weight: 0.7 kg Special features U‑plate screw: M4x11 Clamping screw: M5 U‑plate: TA030 Clamp block: BK024 Allen key: 3 Allen Bore designation: M11 FAQ Which inserts fit this holder? The holder accepts DNMG 1104 indexable inserts; the geometry and clamping components are specified for that insert family. What are the key dimensions to check for toolpost fitting? Check the 25 × 25 mm shank dimensions and the 150 mm overall length to ensure clearance and correct seating in the toolpost. Which screws and plates are used for clamping? Clamping uses an M5 clamping screw and an M4x11 U‑plate screw; the designated U‑plate is TA030 and the clamp block is BK024. Is the holder supplied ready for assembly? The holder is supplied with the specified fastening interfaces and requires the matching insert and toolpost mounting hardware for final assembly. What is the ISO designation for ordering reference? Use the DDNNN 2525 ISO designation and SKU D103TM when ordering or requesting replacement parts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Precision coolant delivery for demanding turning operations
Tool holders with internal coolant are precision components used in machining, particularly turning, to hold indexable inserts securely and feed them to the workpiece. Also referred to as through-coolant tool holders or internal coolant toolholders, these systems channel coolant directly to the cutting edge to reduce thermal load and improve chip control in heavy or high-speed machining.
How they work and where they help most
Standard holders without internal coolant rely on external nozzles, which can be blocked by chips and fail to reach the insert tip reliably. In contrast, holders with internal coolant contain integrated coolant channels and boreholes in the tool shank that guide the coolant under pressure straight to the insert. This targeted supply is particularly valuable for difficult-to-machine materials, high cutting speeds, deep cuts and internal turning where conventional coolant delivery struggles.
Key facts
| characteristic | detail |
|---|---|
| category | tool holders with internal coolant |
| common synonyms | internal coolant toolholders; coolant-through tool holders |
| typical application | turning, heavy machining, internal bore finishing |
| coolant routing | internal channels and boreholes delivering coolant to the insert seat |
| key technical effect | direct cooling at the cutting edge, improved chip evacuation, reduced thermal load |
| comparison | standard holders use external nozzles; internal coolant holders route coolant through the shank |
Measurable benefits for production
- Direct coolant feed reduces the thermal stress on the insert, extending tool life.
- Improved pressure at the cutting zone enhances chip evacuation, reducing recutting and tool damage.
- More consistent cooling helps achieve better surface finish and dimensional stability.
- Reliable coolant delivery under challenging chip conditions supports higher cutting speeds and heavier cuts.
Metav: precision supply and industrial competence
Metav positions itself as the practical partner for workshops and production: a European quality filter based in Emmerich that combines broad product availability with technical expertise. With over 48,000 customers and more than 250,000 products, Metav supplies through-coolant tool holders and related accessories with dependable logistics and application guidance, making sophisticated cooling solutions accessible for every workshop.
In short
Tool holders with internal coolant deliver targeted, high-efficiency coolant to the insert tip, improving chip control, tool life and surface quality in demanding turning tasks.
FAQ
When should I choose tool holders with internal coolant over standard holders?
Choose tool holders with internal coolant when external coolant nozzles cannot reliably reach the cutting edge, for deep cuts, internal turning, heavy machining or when machining difficult materials at high speeds. The internal coolant toolholders ensure direct cooling and better chip evacuation in these scenarios.
Can internal coolant toolholders be used with all insert types?
Internal coolant toolholders are compatible with most indexable inserts provided the holder and insert interface are specified for coolant-through operation. Verify seat type and manufacturer recommendations for coolant-through compatibility.
What performance improvements can I expect from coolant-through tool holders?
Typical improvements include longer tool life, fewer interruptions from clogged external nozzles, improved chip control and a more consistent surface finish due to reduced thermal distortion at the cutting edge.
How is coolant delivered inside an internal coolant toolholder?
Coolant is channelled through boreholes and internal passages in the tool shank directly to the insert pocket; this focused path creates sufficient pressure at the cutting edge to flush chips away and cool the insert effectively.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com