When should through-coolant toolholders be preferred over standard holders?

Choose through-coolant toolholders for deep cuts, internal turning, heavy machining or when external nozzles cannot reliably reach the cutting edge; the internal channels deliver coolant under pressure to improve chip evacuation and reduce thermal load.

What production gains can be expected from internal coolant holders?

Typical gains include extended tool life, fewer interruptions from clogged external nozzles, improved chip control and more consistent surface finish due to reduced thermal distortion at the cutting edge.

How is coolant routed inside an internal coolant toolholder?

Coolant is channelled through boreholes and internal passages in the tool shank straight to the insert pocket, creating sufficient pressure at the cutting edge to flush chips away and cool the insert effectively.

High-precision clamping holders with internal coolant for extended tool life

Name: Metav Werkzeuge GmbH
Address: Parkring 45, Emmerich, 46446, DE
Telephone: +49 2822 7131930
Price range: €€€

Clamping holders with internal coolant are designed to secure indexable inserts accurately while delivering coolant directly to the cutting edge, reducing thermal load and improving chip evacuation in demanding metalworking operations. Used for turning and internal machining of tough materials, these holders channel the coolant through built-in boreholes to the insert and beneath the chip, which boosts tool life and enhances surface finish. As a reliable system solution, the combination of clamping holder, internal coolant and indexable insert ensures consistent performance at high cutting speeds and under heavy cut conditions.

150mm Turning Holder for WN-- 0804 Indexable Inserts, 95° - Teknik Makina

Turning Holder by Teknik Makina The Turning Holder is a precision clamping tool engineered for turning operations with WN-- 0804 indexable inserts, optimised for stable setups and reliable chip control in metalworking. Turning Holder MWMNN 2525 configuration For WN-- 0804 indexable inserts 150 mm Overall Length for stable setups 95° Cutting Angle for reliable chip control Compact head with 12.5 mm insert width Precision Clamping that Improves Process Stability The Turning Holder delivers consistent clamping through its MWMNN 2525 design, which minimises vibration and runout during cutting. With an Overall Length of 150 mm the tool offers a balanced reach that supports steady tool engagement, translating into better surface finish and reproducible tolerances. For machinists seeking measurable improvements in cycle-time reliability, this holder reduces the risk of chatter and workpiece deviation by providing a rigid connection between Machine and Insert. Optimised for WN-- 0804 Indexable Inserts and Effective Chip Flow Designed specifically for WN-- 0804 indexable inserts, the holder’s 12.5 mm cutting-head width and 95° cutting angle support predictable chip formation and evacuation. This configuration makes tool setup straightforward and interchangeability fast, so changeovers take less time without sacrificing cutting performance. For teams who value throughput, the holder’s geometry enables efficient metal removal while maintaining insert life through even load distribution. Who benefits and how this holder fits into your workflow Engineered for professional workshops and production environments, the Turning Holder suits operators working on lathes and turning centers who require repeatable accuracy. The compact head and standardised ISO designation MWMNN 2525 ensure compatibility with common toolposts and clamping systems, helping maintenance and setup staff integrate the holder quickly. If process stability and predictable tool life matter to your operation, this holder is a robust choice that supports productivity targets. Installation, handling and a short explanation for less experienced users Fitting the holder is straightforward: secure the MWMNN 2525 shank in the toolpost and clamp the WN-- 0804 insert according to the manufacturer’s torque recommendations. The 95° cutting angle denotes the included angle between the insert cutting edge and the workpiece, influencing chip direction and cutting forces; a proper clamp prevents micro-movement and extends insert life. For any uncertainty about mounting or machine-specific parameters, METAV Werkzeuge provides expert advice to ensure correct integration. Choose Teknik Makina’s Turning Holder for proven clamping stability and contact METAV Werkzeuge for personal technical support at info@metav-werkzeuge.com or +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Turning Holder Brand: Teknik Makina SKU: D116TM For Inserts: WN-- 0804 Suitable Inserts: WN-- 0804 Overall Length: 150 mm Weight: 0.724 kg ISO Designation: MWMNN 2525 Secondary Designation: M08 Width: 25 mm Height: 25 mm Cutting Head Width: 12.5 mm Cutting Angle: 95° GTIN: 4061905151071 Availability: in Stock Condition: new Label: Klemmhalter MWMNN 2525 95° WN-- 0804 Manufacturer / Manufacturer for English: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person / Responsible Person for English: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is designed for WN-- 0804 indexable inserts; using the specified insert type ensures correct seating and optimal cutting geometry with the MWMNN 2525 shank. How long is the Turning Holder and what does that mean for setup? The Turning Holder has an overall length of 150 mm, which provides a balance between reach and rigidity; this length supports stable setups on most lathes while keeping tool overhang moderate. Can METAV Werkzeuge help with mounting the Turning Holder? Yes, METAV Werkzeuge offers expert advice for mounting and selecting the correct clamping torque for the Turning Holder by Teknik Makina—contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D116TM","sku":"D116TM","mpn":"D116TM","gtin13":"4061905151071","name":"Turning Holder MWMNN 2525 95° for WN-- 0804, 150 mm - Teknik Makina","description":"MWMNN turning holder for WN-- 0804 indexable inserts; 150 mm overall length, 95° cutting angle, 25x25 mm shank, 12.5 mm cutting head width, weight 0.724 kg.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/3c/7e/de/62/62de7e3cbd24461b3d5f7a1f/d114tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/01/8d/e2/62/62e28d014355de0a51335f50/d114tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d9/7e/de/62/62de7ed9148ec6b71020ffb7/d114tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For Indexable Inserts","value":"WN-- 0804"},{"@type":"PropertyValue","name":"Overall Length","value":"150 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"95°"},{"@type":"PropertyValue","name":"Shank Width","value":"25 mm"},{"@type":"PropertyValue","name":"Shank Height","value":"25 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"12.5 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.724 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"MWMNN 2525"},{"@type":"PropertyValue","name":"Drill Shank Designation","value":"M08"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What insert type does this holder accept?","acceptedAnswer":{"@type":"Answer","text":"Designed for WN-- 0804 indexable inserts."}},{"@type":"Question","name":"What is the overall length of the holder?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 150 mm."}},{"@type":"Question","name":"What cutting angle does the holder have?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 95°."}},{"@type":"Question","name":"What are the shank dimensions?","acceptedAnswer":{"@type":"Answer","text":"Shank width and height are 25 mm each."}},{"@type":"Question","name":"What is the cutting head width?","acceptedAnswer":{"@type":"Answer","text":"Cutting head width is 12.5 mm."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/turning-holder-mwmnn-2525-wn-0804-d116tm","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"MWMNN Series"},{"@type":"Thing","name":"Indexable Insert Tooling"}],"mentions":[{"@type":"Thing","name":"WN-- 0804 Inserts"},{"@type":"Thing","name":"95° Cutting Angle"},{"@type":"Thing","name":"MWMNN 2525 ISO Designation"}]}]}

€48.00

150mm Turning Holder for WN-- 0804, 95° Schnittwinkel - Teknik Makina

Turning Holder (Klemmhalter) by Teknik Makina The Turning Holder is a clamping tool designed for WN-- 0804 indexable inserts, engineered for reliable left-hand turning in precision metalworking applications. Turning Holder for WN-- 0804 inserts Compatible with ISO MWLNL 2525 shank 150 mm Overall Length for rigid setup 95° Cutting Angle for controlled chip flow Left-hand Cutting Direction for specific turning tasks Built for accurate, repeatable turning results The Turning Holder from Teknik Makina is engineered to secure WN-- 0804 indexable inserts with stable clamping and consistent alignment. The combination of a defined 95° Cutting Angle and precise insert seating reduces tool deflection and supports predictable cutting behaviour. This results in repeatable dimensions across batches and less time spent on rework, which benefits shops that require consistent component tolerances. Compact dimensions that enhance rigidity and surface finish With a 150 mm Overall Length and a shank cross-section of 25 mm x 25 mm, the holder delivers a compact footprint that increases Rigidity at the cutting zone. The Cutting Head Width 32 mm provides a stable interface for the insert, minimising vibration and helping to achieve improved surface finish on turned parts. These dimensional advantages are especially relevant when machining materials that demand tight geometric control. Optimised for left-hand turning tasks and chip control Designed for left-hand cutting direction, the toolholder directs chip flow predictably and supports efficient evacuation during operations. The geometry and clamping principle promote secure insert retention, reducing the likelihood of insert movement under load and improving overall process reliability. This makes the component suitable for workshops performing both production runs and precision finishing operations where consistent chip control matters. ISO compatibility and straightforward integration into existing toolsets The toolholder carries the ISO MWLNL 2525 designation and includes the secondary designation M08, ensuring compatibility with standard toolposts and clamping systems. Integration is straightforward: the holder mounts to common tool turrets and accepts WN-- 0804 inserts without special adapters, simplifying tool inventory and setup. Reduced setup complexity contributes to shorter machine downtime and faster changeovers between jobs. Choose the Teknik Makina Turning Holder to strengthen machining performance and rely on expert support from METAV Werkzeuge — for technical questions or advice contact METAV Werkzeuge via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Data for accurate selection Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D324TM Compatible Inserts: WN-- 0804 Overall Length: 150 mm Weight: 0.761 kg ISO Designation: MWLNL 2525 Secondary Designation: M08 Width (Shank): 25 mm Height (Shank): 25 mm Cutting Head Width: 32 mm Cutting Angle: 95° Cutting Direction: left GTIN: 4061905151040 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Teknik Makina Turning Holder and how are they secured? The Teknik Makina Turning Holder accepts WN-- 0804 indexable inserts; inserts are secured by the clamping pocket designed for reliable seating and positive indexing to ensure repeatable positioning. Is the Turning Holder compatible with standard turret toolposts? Yes, the Turning Holder by Teknik Makina uses the ISO MWLNL 2525 shank format and the secondary designation M08, which allows mounting in common turret toolposts without special adapters. Which cutting direction and angle are provided by this turning tool? The Teknik Makina Turning Holder is fabricated for left-hand cutting operations and features a 95° Cutting Angle to support controlled chip flow and stable cutting conditions. Who can provide technical advice for integrating the Turning Holder into a machine setup? METAV Werkzeuge offers comprehensive support for the Teknik Makina Turning Holder; for setup guidance or additional technical data contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. 95° Turning Holder 150mm for WN-- 0804, MWLNL 2525, left - Teknik Makina

€48.00

150mm Turning Holder for WNMG 0804 Indexable Inserts, 95° PWLNR 2525 - Teknik Makina

Turning Holder PWLN for WNMG Indexable Inserts by Teknik Makina The Turning Holder PWLN for WNMG Indexable Inserts is a right-hand, 150 mm toolholder designed for stable lathe turning with WNMG 0804 inserts, offering internal coolant capability and a robust 95° cutting angle. Turning Holder PWLN for WNMG Indexable Inserts Suitable for WNMG 0804 indexable inserts 150 mm overall length for stable machining Internal coolant for improved chip evacuation 95° cutting angle, right-hand orientation Delivering Precision and Rigidity for Turning Tasks The Turning Holder is engineered to provide consistent Precision and Rigidity during turning operations. Its 150 mm Overall Length and compact 25 mm Width/Height minimise deflection, so single-point operations and intermittent cuts run with greater stability. The 95° Cutting Angle supports predictable Tool Engagement and repeatable Surface Finish, which helps reduce rework and improves process reliability for workshop and production environments. Features That Improve Machining Efficiency A key practical advantage is the integrated Internal Coolant channel which delivers coolant close to the cutting edge for better chip control and heat management. The holder accepts WNMG 0804 indexable inserts and uses a secure clamping system (Clamping Screw TH821 and Cam Lever TL4) that shortens insert changes and setup times. The holder’s ISO designation PWLNR 2525 makes it straightforward to match with standard tool posts and turrets. Clear Compatibility and Simple Handling for Users This toolholder is aimed at machinists and maintenance technicians who need a reliable solution for turned parts production. Compatibility with WNMG 0804 inserts ensures broad availability of grades and geometries, while the right-hand orientation supports common lathe setups. For operators less familiar with insert codes: WNMG 0804 denotes a rhombic-shaped, medium-sized indexable insert that balances chipbreaking and edge strength for general turning tasks. Practical Setup and Service Guidance Assembly and routine handling are straightforward: a 3 Allen key is specified for clamping operations and the compact Cutting Head Width of 32 mm provides a secure seating for the insert. Regular inspection of the Clamping Screw TH821 and the Cam Lever TL4 ensures consistent performance. If coolant-fed machining is required, the internal coolant path allows direct feed to the insert vicinity, improving tool life and process stability. Secure the Teknik Makina Turning Holder to elevate your machining setup — METAV Werkzeuge provides expert consultation and technical support at info@metav-werkzeuge.com or by phone +49 2822 7131930; WhatsApp +49 170 2837271 Designation: Turning Holder Brand: Teknik Makina SKU: AP151TM Suitable Inserts: WNMG 0804 Overall Length: 150 mm Weight: 0.782 kg Allen Key: 3 Allen ISO Designation: PWLNR 2525 Secondary Designation: M08-IKG1/8 Width: 25 mm Height: 25 mm Cutting Head Width: 32 mm Clamping Screw: TH821 Cam Lever: TL4 Cutting Angle: 95° Cutting Direction: Right Internal Coolant: Yes GTIN: 4061905150340 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder PWLN for WNMG Indexable Inserts from Teknik Makina? The Turning Holder PWLN for WNMG Indexable Inserts by Teknik Makina is designed specifically to accept WNMG 0804 indexable inserts, ensuring broad grade and geometry compatibility for general turning tasks. Does the Teknik Makina Turning Holder offer coolant capability? Yes, the Turning Holder PWLN for WNMG Indexable Inserts features Internal Coolant, which supplies coolant close to the cutting edge to aid chip evacuation and heat control. What are the key dimensions and orientation of the Turning Holder from Teknik Makina? The Teknik Makina Turning Holder has a 150 mm Overall Length, 25 mm Width and Height, a 32 mm Cutting Head Width, and a 95° Cutting Angle with a right-hand orientation for standard lathe setups. Can METAV Werkzeuge provide additional technical advice for the Turning Holder PWLN for WNMG Indexable Inserts? Absolutely — METAV Werkzeuge offers comprehensive consultation for the Turning Holder PWLN for WNMG Indexable Inserts; contact info@metav-werkzeuge.com or call +49 2822 7131930 for assistance with selection or technical data. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#AP151TM","sku":"AP151TM","mpn":"AP151TM","gtin13":"4061905150340","name":"150mm Turning Holder PWLNR 2525 for WNMG 0804, 95° - Teknik Makina","description":"Turning holder for WNMG 0804 indexable inserts; 150 mm overall length, 95° cutting angle, internal coolant, ISO PWLNR 2525.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/0b/8d/e2/62/62e28d0b33927e49dbf377ee/ap150tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/de/7e/de/62/62de7edebd24461b3d5f7a64/ap150tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/43/7e/de/62/62de7e43bd24461b3d5f7a25/ap150tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For indexable inserts","value":"WNMG 0804"},{"@type":"PropertyValue","name":"ISO designation","value":"PWLNR 2525"},{"@type":"PropertyValue","name":"Overall length","value":"150 mm"},{"@type":"PropertyValue","name":"Cutting angle","value":"95°"},{"@type":"PropertyValue","name":"Internal coolant","value":"yes"},{"@type":"PropertyValue","name":"Width","value":"25 mm"},{"@type":"PropertyValue","name":"Height","value":"25 mm"},{"@type":"PropertyValue","name":"Cutting head width","value":"32 mm"},{"@type":"PropertyValue","name":"Screw","value":"TH821"},{"@type":"PropertyValue","name":"Lever","value":"TL4"},{"@type":"PropertyValue","name":"Wrench","value":"3 Allen"},{"@type":"PropertyValue","name":"Weight","value":"0.782 kg"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Designed for WNMG 0804 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 150 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 95°."}},{"@type":"Question","name":"Does it have internal coolant?","acceptedAnswer":{"@type":"Answer","text":"Yes, internal coolant is available."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation is PWLNR 2525."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder Series"},{"@type":"Thing","name":"WNMG 0804 Compatibility"},{"@type":"Thing","name":"ISO PWLNR 2525"}],"mentions":[{"@type":"Thing","name":"TH821 clamping screw"},{"@type":"Thing","name":"TL4 lever"},{"@type":"Thing","name":"M08-IKG1/8 bore designation"}]}]}

€81.00

150mm Turning Holder for WNMG 0804 Inserts, PWLN PWLNR 2525, 95° - Teknik Makina

Turning Holder for WNMG Indexable Inserts (Klemmhalter) – Teknik Makina A robust Turning Holder designed for WNMG 0804 indexable inserts, intended for precise right-hand turning operations on lathes. For WNMG 0804 indexable inserts PWLNR 2525 ISO designation 150 mm overall length for stable turning 25 x 25 mm shank for rigid clamping 95° cutting angle for precise right-hand cuts Precise right-hand turning with consistent cutting geometry The Turning Holder from Teknik Makina is engineered to deliver repeatable results when used with WNMG 0804 indexable inserts. Its 95° cutting angle positions the insert for accurate right-hand cuts, reducing the need for frequent rework. For users unfamiliar with tool geometry, a 95° approach provides a neutral engagement that balances chip control and tool life, making the holder suitable for general turning tasks across a range of materials. Stable dimensions that reduce vibration and extend tool life With an overall length of 150 mm and a 25 x 25 mm shank, this holder offers a rigid connection between Machine and Insert, which minimises deflection during heavy cuts. The 32 mm cutting head width supports the insert firmly, translating into improved surface finish and longer insert life. These dimensional choices are deliberate to help workshops maintain productivity while avoiding chatter on medium-duty turning operations. Easy clamping and clear compatibility for efficient setup The clamping concept of the holder accepts WNMG 0804 indexable inserts and follows the PWLNR 2525 ISO designation, allowing straightforward replacement and standardised setup across machines. The right-hand cutting direction is specified to prevent setup errors; operators switching inserts will benefit from the holder’s standardised interface, which reduces setup time and simplifies inventory management for job shops. Who benefits from this Turning Holder and where it excels This product is targeted at professional machinists, small to medium workshops and production environments that require reliable toolholding for general turning tasks. The Turning Holder is particularly useful when repeatability and compatibility with widely used WNMG 0804 inserts are priorities. Maintenance teams and operators will appreciate the familiar ISO designation and the reduced complexity during insert changes. Strongly recommended for precise right-hand turning: choose the Teknik Makina Turning Holder for reliable compatibility with WNMG 0804 inserts — for technical consultation contact METAV Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Designation: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: P151TM Compatible Inserts: WNMG 0804 ISO Designation: PWLNR 2525 Secondary Designation: M08 Overall Length: 150 mm Weight: 0.773 kg Shank Width: 25 mm Shank Height: 25 mm Cutting Head Width: 32 mm Cutting Angle: 95° Cutting Direction: right GTIN: 4061905149900 Condition: new Availability: in Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder by Teknik Makina and what should I consider? The Turning Holder from Teknik Makina is designed for WNMG 0804 indexable inserts; ensure you use the correct insert geometry for your machining task to achieve optimal chip control and surface finish. Is the Turning Holder suitable for left-hand operations? This Turning Holder is configured for right-hand cutting direction; for left-hand operations select an appropriate left-hand holder or confirm compatibility with your setup before machining. How is the insert secured in the PWLNR 2525 holder and is replacement straightforward? The PWLNR 2525 interface provides a standard clamping method for quick insert changes, so replacing WNMG 0804 inserts in the Turning Holder is a routine task that reduces downtime. Can METAV Werkzeuge provide advice on choosing the right Turning Holder for my machine? Yes, METAV Werkzeuge offers expert consultation for tooling choices; contact info@metav-werkzeuge.com or call +49 2822 7131930 for guidance on the Teknik Makina Turning Holder and matching inserts. 95° Turning Holder PWLNR 2525 for WNMG 0804 Indexable Inserts, 150mm Length - Teknik Makina

€48.00

150mm Turning Holder MWLN For WN-- Indexable Inserts, 95° - Teknik Makina

Introducing the Turning Holder from Teknik Makina The Turning Holder is a precision clamping tool for indexable inserts, designed for right-hand turning operations with WN-- 0804 inserts. Turning Holder MWLNR 2525 for WN-- 0804 inserts 150 mm overall length for stable support 95° cutting angle for controlled right-hand cutting 25 x 25 mm shank for secure clamping 32 mm cutting head width for rigid engagement Precision clamping for consistent turning results The Turning Holder offers a stable mounting platform that improves cutting consistency and tool life. Fitted to accept WN-- 0804 indexable inserts and specified as MWLNR 2525, this holder ensures correct insert seating and repeatable positioning. For operators, that means fewer re-adjustments between setups and a reliable reference point for repeat jobs. The secure clamping reduces micro-movements that can degrade surface finish, so one clear benefit is improved part quality with less scrap. Robust geometry that simplifies setup and increases stiffness With a 25 mm shank width and 25 mm height, the holder delivers a compact, square interface that is simple to clamp in most tool posts. The 150 mm overall length provides the necessary reach without compromising rigidity. The ISO designation MWLNR 2525 indicates the standardized shank and orientation, making interchangeability straightforward and setup times shorter. For workshops aiming to reduce downtime, this translates into faster tool changes and consistent machine performance. Cutting angle tuned for controlled chip flow and surface finish A 95° cutting angle combined with a right-hand cutting direction offers a geometry that supports predictable chip formation and stable cutting forces. This configuration helps maintain a uniform engagement between insert and workpiece, reducing vibration and enhancing surface finish on turned parts. For machinists, the result is fewer passes to reach dimensional and cosmetic targets, which can improve throughput on repeat production tasks. Intended users and workshop applications The Turning Holder is designed for professional machining environments that use indexable inserts, particularly where right-hand turning with WN-- 0804 inserts is standard. Suitable for CNC lathes and manual turning centers that accept MWLNR-style holders, it supports applications where precision and repeatability are essential. Buyers seeking a toolholder that simplifies insert changes and maintains alignment under load will find this product aligns with those needs. Teknik Makina engineering focuses on durable tool interfaces, which supports reliable daily operation. Choose the Teknik Makina Turning Holder to secure precise right-hand turning in your workshop — for technical advice or to confirm fitment, contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271 Technical Specifications Designation: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: D184TM Suitable inserts: WN-- 0804 ISO designation: MWLNR 2525 Secondary designation: M08 Overall length: 150 mm Shank width: 25 mm Shank height: 25 mm Cutting head width: 32 mm Cutting height: 35 mm Cutting direction: right Cutting angle: 95° GTIN: 4061905151019 Weight: 0.761 kg Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and how are they referenced? The Turning Holder by Teknik Makina is designed to accept WN-- 0804 indexable inserts; this holder uses the ISO-style designation MWLNR 2525 to indicate shank dimensions and insert orientation. Is the Turning Holder suitable for CNC lathes and manual tool posts? Yes, the Teknik Makina Turning Holder with a 25 x 25 mm shank is compatible with standard tool posts that accept MWLNR-style holders, enabling use on both CNC lathes and manual turning centers. How does the 95° cutting angle affect performance with the Teknik Makina Turning Holder? The 95° cutting angle on the Teknik Makina Turning Holder promotes controlled chip flow and reduced vibration during right-hand cutting, which helps achieve improved surface finish and dimensional consistency. Who can I contact if I need help choosing the right holder or verifying fitment? For guidance on the Turning Holder from Teknik Makina or to confirm compatibility with your machine, METAV Werkzeuge offers expert advice — email info@metav-werkzeuge.com, call +49 2822 7131930, or WhatsApp +49 170 2837271. 150mm Turning Holder MWLN for WN-- 0804 Indexable Inserts, 95° - Teknik Makina

€48.00

150mm Turning Holder PWLN for WNMG 0804, 95° left, PWLNL 2525 - Teknik Makina

Turning Holder (Klemmhalter) for WNMG 0804 Indexable Inserts by Teknik Makina Turning Holder (Klemmhalter) engineered for precise left-hand turning with WNMG 0804 indexable inserts in workshop and industrial machining applications. Compatible with WNMG 0804 indexable inserts 150 mm overall length for extended reach Internal Coolant for improved chip control ISO PWLNL 2525 profile for standard tooling Left-hand cutting with 95° cutting angle Precision and process reliability for demanding turning tasks The Turning Holder delivers consistent cutting performance by combining a rigid clamping design with a geometry optimised for stability. With compatibility for WNMG 0804 inserts and a 95° Cutting Angle, the toolholder minimises vibration and deflection during heavy-duty passes, which improves surface finish and reduces rework. This results in measurable gains in machining consistency and cycle-time reliability for production environments. Durable design that supports efficient chip evacuation Constructed to withstand workshop conditions, the holder integrates Internal Coolant to flush chips away from the cutting zone and help extend insert life. The coolant feed reduces built-up edge and thermal load on the insert, enabling longer uninterrupted cutting sequences. Benefit: fewer insert changes and reduced downtime for maintenance during medium- to high-volume turning operations. Built to fit standard tool systems and simplify setup The holder follows the ISO PWLNL 2525 profile to ensure straightforward integration into existing tool chains and quick changeover. Supplied with the designated clamping hardware—Clamping Screw TH821 and Lever TL4—assembly is secure and repeatable. The standard footprint speeds up toolholder replacement and supports predictable tool offsets, which is especially valuable in batch production or when switching between multiple lathes. Optimised geometry for workshop versatility With a 150 mm overall length and a Cutting Head Width of 32 mm, the toolholder is designed to reach deeper pockets while maintaining control over the cutting forces. The profile (25 mm Width × 25 mm Height) offers a compact yet robust solution for turning operations that require access without compromising rigidity. Left-hand cutting direction is provided for workpieces and setups that demand reverse orientation. Practical compatibility and service support Compatibility with common WNMG 0804 inserts and the clear ISO designation make tooling choices transparent and reduce ordering errors. For complex setups or specific material questions, METAV Werkzeuge provides competent consultation to ensure the holder meets your exact machining needs. Technical support is available for selection, mounting recommendations, and process optimisation. Choose Teknik Makina’s Turning Holder (Klemmhalter) for reliable left-hand turning—contact METAV Werkzeuge for personalised technical advice at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271. Bezeichnung: Turning Holder (Klemmhalter) Marke: Teknik Makina SKU: AP156TM Compatible Inserts: WNMG 0804 Overall Length: 150 mm Weight: 0.782 kg Allen Key: 3 Allen ISO Designation: PWLNL 2525 Secondary Designation: M08-IKG1/8 Width: 25 mm Height: 25 mm Cutting Head Width: 32 mm Clamping Screw: TH821 Lever: TL4 Pin: TS-4 Cutting Height: 38 mm Cutting Direction: Left Cutting Angle: 95° Internal Coolant: Yes GTIN: 4061905150364 Availability: In Stock Condition: New Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which sizes are supported? The Turning Holder by Teknik Makina is designed to accept WNMG 0804 indexable inserts, making it suitable for workshops that rely on these standard insert dimensions for general turning and finishing operations. Does the Turning Holder (Klemmhalter) feature coolant through capability? Yes, the Turning Holder includes Internal Coolant, enabling direct coolant delivery to the cutting edge to improve chip evacuation and reduce thermal load on the insert. How does the ISO PWLNL 2525 designation affect tool compatibility? The ISO PWLNL 2525 designation ensures the Turning Holder follows a recognised tooling profile, simplifying integration with existing tool posts and reducing the need for custom adapters in most standard turning setups. Who can I contact for help choosing the right Teknik Makina Turning Holder for my machine? For personalised advice on the Teknik Makina Turning Holder (Klemmhalter), METAV Werkzeuge offers expert consultation—reach out via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271. 150mm Turning Holder PWLNL 2525, 95° left, for WNMG 0804 indexable inserts - Teknik Makina

€81.00

150x25 Turning Holder for ER Indexable Inserts with Coolant, 16 ER, 150mm - Teknik Makina

Turning Holder for ER Indexable Inserts with Internal Coolant — Teknik Makina A Turning Holder designed for secure clamping of 16 ER indexable inserts, providing integrated internal coolant for consistent chip evacuation and stable machining. Suitable for 16 ER indexable inserts Internal coolant for improved chip control Compact 25 x 25 mm cross-section 150 mm overall length for deep reach Easy assembly with Torx T15 and M3.5x11 screws Precision clamping with coolant for consistent turning results The Turning Holder from Teknik Makina secures 16 ER indexable inserts with a robust clamping mechanism that keeps inserts firmly positioned during heavy cuts. The integrated Internal Coolant directs cutting fluid close to the cutting edge, reducing heat and improving tool life. This combination leads to more predictable machining cycles and fewer interruptions for insert changes, making it suitable for demanding turning operations. Stable geometry and dimensions for reliable setups A compact 25 x 25 mm shank and 150 mm overall length deliver a rigid tool setup with sufficient reach for a wide range of turning tasks. The defined cross-section minimizes deflection while the specified Pass Disk TA060 and U Plate TA061 ensure compatibility with related clamping components. These dimensional choices reduce vibration and contribute to consistent surface quality on turned parts. Quick installation and low-maintenance handling Assembly uses a Torx T15 key and M3.5x11 Torx screws for secure fastening and straightforward maintenance. The holder’s clear mounting interfaces simplify changeover and reduce setup time, which improves shop-floor productivity. Routine checks of the clamping screws and coolant passages keep the holder operating at peak performance with minimal downtime. Built for professional shops and robust production environments Manufactured by Teknik Makina, this holder targets professional workshops and industrial turning centers that demand repeatable accuracy and coolant-capable tooling. The design focuses on longevity and serviceability, offering a dependable solution for series production where tool stability and coolant delivery are essential. Highly recommended: Choose the Teknik Makina Turning Holder for ER indexable inserts when you require dependable clamping and integrated coolant support — METAV Werkzeuge provides expert consultation and technical assistance at info@metav-werkzeuge.com or +49 2822 7131930, WhatsApp +49 170 2837271. Technical Data Turning Holder for ER Indexable Inserts with Internal Coolant Brand: Teknik Makina SKU: AP604TM For Indexable Inserts: 16 ER Compatible Inserts: 16 ER Cross-Section: 25 x 25 mm Overall Length: 150 mm Pass Disk: TA060 U Plate: TA061 Torx Key: T15 Torx Screw: M3.5x11 Internal Coolant: Yes Availability: In Stock Condition: New GTIN: 4061905074110 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts are compatible with the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is designed for 16 ER indexable inserts; these inserts fit the holder’s clamping seat and allow the use of coolant through the internal channels for improved cutting performance. Does the Teknik Makina Turning Holder support internal coolant? Yes, the Teknik Makina Turning Holder features Internal Coolant, enabling direct coolant delivery to the cutting edge when used with appropriate machine coolant plumbing and compatible inserts. How long is the Turning Holder and what are its dimensions? The Turning Holder has an overall length of 150 mm and a cross-section of 25 x 25 mm, dimensions chosen to balance reach and rigidity for stable turning operations. What tools are required to install and maintain the holder? Installation and maintenance of the Teknik Makina Turning Holder use a Torx T15 key and M3.5x11 Torx screws, simplifying secure fastening and routine checks to maintain reliable clamping performance. Who can provide technical advice for the Teknik Makina Turning Holder? METAV Werkzeuge offers detailed consultation for the Teknik Makina Turning Holder; contact their technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for support and compatibility guidance. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#AP604TM","sku":"AP604TM","mpn":"AP604TM","gtin13":"4061905074110","name":"150x25 Turning Holder for 16 ER Indexable Inserts with Coolant, 150 mm - Teknik Makina","description":"Turning holder, 25x25, for 16 ER indexable inserts with internal coolant, overall length 150 mm; robust clamping for precision turning.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/82/6d/1d/64/641d6d82ff739ebda68866a7/ap602tm-main.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Dimension","value":"25x25"},{"@type":"PropertyValue","name":"For Inserts","value":"16 ER"},{"@type":"PropertyValue","name":"Overall Length","value":"150 mm"},{"@type":"PropertyValue","name":"Coolant","value":"internal"},{"@type":"PropertyValue","name":"Passring","value":"TA060"},{"@type":"PropertyValue","name":"Torx Key","value":"T15"},{"@type":"PropertyValue","name":"Torx Screw","value":"M3,5x11"},{"@type":"PropertyValue","name":"U Plate","value":"TA061"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts does this holder accept?","acceptedAnswer":{"@type":"Answer","text":"The holder accepts 16 ER indexable inserts."}},{"@type":"Question","name":"Does the holder support internal coolant?","acceptedAnswer":{"@type":"Answer","text":"Yes, it features internal coolant."}},{"@type":"Question","name":"What are the dimensions and length?","acceptedAnswer":{"@type":"Answer","text":"Dimensions 25x25 with an overall length of 150 mm."}},{"@type":"Question","name":"Which passring is compatible?","acceptedAnswer":{"@type":"Answer","text":"Compatible passring: TA060."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"16 ER Indexable Inserts"},{"@type":"Thing","name":"Internal Coolant"}],"mentions":[{"@type":"Thing","name":"Passring TA060"},{"@type":"Thing","name":"U Plate TA061"},{"@type":"Thing","name":"Torx Key T15"}]}]}

€81.00

16 ER Clamp Holder for Outside Thread, 110 mm Length, ISO AL 1212 - Teknik Makina

Turning Holder for Outside Thread by Teknik Makina The Turning Holder for Outside Thread delivers secure clamping and precise alignment for professional external threading and turning operations. Teknik Makina Turning Holder for Outside Thread Compact ISO AL 1212 design for stable clamping Fits ISO Inserts 16 ER and 16 IR 110 mm Overall Length for versatile reach Quick screw change reduces setup time Precise alignment for consistent surface finish Precision and stable clamping for reliable threads Manufactured to tight tolerances, the Turning Holder provides a secure seat that prevents Insert movement and ensures repeatable results. This stability directly improves Surface Finish and reduces rework, making each machining cycle more predictable. The robust clamp interface and precise pocket geometry keep the Insert aligned under cutting forces, so users benefit from fewer stoppages and a steady machining quality. Faster changeover to increase shop productivity Designed for quick access and simple screw release, the clamp enables rapid Insert swaps and lowers setup times by eliminating complex adjustments. One clear advantage is reduced downtime during batch runs, which results in higher throughput without altering machining parameters. Operators will appreciate a straightforward workflow that keeps production moving while maintaining consistent Cutting Performance. Wide compatibility with common ISO Inserts This holder is compatible with standard ISO Inserts including 16 ER, 16 IR, 22 ER and 22 IR, allowing flexible use across turning and threading tasks. Compatibility with multiple Insert geometries means fewer specialized tools are needed, simplifying tooling inventory and enabling fast adaptation to different materials and profiles. The result is a versatile solution for workshops that handle varied turning assignments. Built for professionals and demanding applications Engineered by Teknik Makina, the clamp is targeted at professional workshops and industrial users who require durability and reproducibility. Its 110 mm overall length and 16 mm cutting head width make it suitable for external threading and general turning where access and control are essential. Durability and consistent clamping translate into lower lifecycle costs through extended tool and Insert life. Trust Teknik Makina’s precision — contact METAV Werkzeuge for expert consultation and tailored support on this Turning Holder; reach out via eMail info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance. Designation: Klemmhalter (Turning Holder for Outside Thread) Brand: Teknik Makina SKU: D261TM Compatible Inserts: 16 ER, 16 IR, 22 ER, 22 IR Overall Length: 110 mm Weight: 0.144 kg ISO Designation: AL 1212 Alternate Designation: J16- ER16 Width: 12 mm Height: 12 mm Cutting Head Width: 16 mm Cutting Direction: Right GTIN: 4061905152504 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What Inserts fit the Turning Holder by Teknik Makina? The Turning Holder from Teknik Makina accepts common ISO Inserts such as 16 ER and 16 IR, as well as 22 ER and 22 IR, allowing straightforward selection of the correct geometry for threading or turning tasks. Is the Turning Holder suitable for external threading operations? Yes, the Teknik Makina Turning Holder is specifically designed for Outside Thread applications and provides the clamping security and alignment needed for precise external threading. How quickly can I change an Insert on this Turning Holder? The Turning Holder features an accessible screw fastening that enables fast Insert exchange and reduces setup time, supporting efficient workflow in production environments. Where can I get technical advice or help choosing the right variant? METAV Werkzeuge offers comprehensive and competent consultation for the Teknik Makina Turning Holder; contact the team at info@metav-werkzeuge.com, call +49 2822 7131930, or message via WhatsApp at +49 170 2837271 for personalised support. 16mm Clamp Holder for Outside Thread, 110 mm Length, ISO AL 1212 - Teknik Makina

€33.00

16 IR Turning Holder for Outside Thread, 125mm Length, AL 2020 - Teknik Makina

Turning Holder — Clamping holder for external threads by Teknik Makina A Turning Holder engineered for precise external-thread operations, designed to accept 16 IR indexable inserts with a reliable 125 mm overall length. Compatible with 16 IR indexable inserts 125 mm overall length for stable support Left-hand cutting direction for specialized turning ISO designation AL 2020 for standardized fitting Precision and stability for external-thread turning The robust clamping design ensures stable cutting conditions when machining external threads. Constructed to accept 16 IR indexable inserts, this toolholder provides consistent positioning of the insert, reducing vibration and tool deflection. As a result, users achieve clean thread profiles and prolonged insert life. The combination of a compact cutting-head geometry and secure clamping translates directly into repeatable, high-quality turning results on shafts and cylindrical parts. Compact dimensions that improve tool access and rigidity With a total length of 125 mm and a cross-section of 20 mm x 20 mm, the holder balances accessibility and rigidity for confined setups. The modest profile facilitates close-in turning operations while maintaining sufficient stiffness to resist chatter. For workshops that require compact tool setups or multi-tool turrets, this design helps to maintain consistent cut conditions without sacrificing tool life or surface finish. Compatibility and clear technical standardisation Designed with the AL 2020 ISO designation and referenced as K16-IR16 in accessory listings, the holder fits common mounting patterns and insert families. The left-hand cutting orientation suits operations where tool geometry or machine configuration requires that direction. Compatibility with standard 16 IR inserts simplifies tooling costs and inventory management, letting operators select coated or uncoated grades according to workpiece material and cutting parameters. Who benefits from this clamping solution Workshop professionals, CNC machinists and toolroom specialists will value the reproducible setup and straightforward insert changeability. The holder is aimed at users who prioritise process reliability and component repeatability during external-thread manufacture. For applications demanding frequent tool swaps or minimal setup times, the standardized design reduces downtime and supports efficient production cycles. Highly recommended: choose the Turning Holder from Teknik Makina for reliable, repeatable external-thread turning — for personalised technical advice and ordering support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Data Bezeichnung: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: D268TM Suitable indexable inserts: 16 IR Overall length: 125 mm ISO designation: AL 2020 Secondary designation: K16- IR16 Width: 20 mm Height: 20 mm Cutting head width: 20 mm Cutting direction: Left Weight: 0.416 kg GTIN: 4061905152566 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and what does that mean for my workshop? The Turning Holder by Teknik Makina is compatible with 16 IR indexable inserts, which means standard insert shapes and grades can be used to match workpiece materials, simplifying supply logistics and allowing quick changes for different cutting tasks. Can the Turning Holder (Klemmhalter) be used for internal threading? This Turning Holder is specifically designed for external-thread operations and left-hand cutting; for internal threading other dedicated holders and tooling systems are recommended to ensure correct geometry and chip evacuation. How does the AL 2020 ISO designation affect mounting and interchangeability? The AL 2020 designation indicates a standardised interface and dimensions, so the Turning Holder matches common turret and toolpost fittings, enabling straightforward replacement and compatibility with existing setups. Who can I contact for technical advice or to confirm suitability for my machinery? For tailored consultancy and detailed technical support regarding the Turning Holder from Teknik Makina, METAV Werkzeuge provides competent advice — reach out via info@metav-werkzeuge.com or call +49 2822 7131930. 125mm Turning Holder for Outside Thread, 16 IR, AL 2020 - Teknik Makina

€36.00

16mm SDJC for DCMT 0702, 100mm Length, Right-hand, 0.2kg - Teknik Makina

Turning Holder SDJC for DCMT Indexable Inserts by Teknik Makina The Turning Holder SDJC for DCMT Indexable Inserts is a right-hand clamping tool designed for secure turning operations with DCMT 0702 inserts in compact tool setups. Turning Holder SDJC for DCMT inserts Suitable for DCMT 0702 indexable inserts 16 mm shank width for compact toolholders Right-hand cutting orientation with 93° approach Torx T8 key and M2.5x5.5 fastening screw Precise clamping for consistent cutting results A robust clamping geometry ensures that the SDJCR 1616 design holds the insert firmly during heavy cuts, which reduces vibration and improves surface finish. The controlled clearance and seat accuracy of this toolholder benefit shops that require repeatable results. For users unfamiliar with indexable tooling: an indexable insert is a replaceable cutting tip, so a secure holder like this directly translates into longer tool life and fewer setup adjustments. Optimised for DCMT 0702 inserts and compact setups This toolholder is engineered specifically for DCMT 0702 indexable inserts, providing correct seating and chip flow for typical turning tasks. The compact 16 mm shank width makes the holder suitable where space is limited, enabling closer tool positioning and reduced overhang. The result is enhanced rigidity and improved dimensional accuracy on turned parts, especially in batch production or when working with limited turret clearance. Durable design and straightforward fastening Maintenance and changeover are simplified by the standardised fastening: a Torx T8 key and M2.5x5.5 screw ensure quick insert clamping and reliable torque transmission. The holder’s dimensions — overall length 100 mm and overall height 16 mm — provide a balanced profile for both setup stability and accessibility. For workshops, this means less downtime during insert changes and consistent clamping force across repeated operations. Suitable applications and intended users Manufactured for metalworking professionals, the holder fits turning centres and lathes where right-hand cutting is required. With a 93° approach angle and right-hand orientation, the component is ideal for external turning tasks that demand tight tolerances. Small job shops and production environments that prioritise quick insert changes and dependable repeatability will particularly benefit from this compact, performance-oriented toolholder. Choose Teknik Makina’s Turning Holder for reliable, space-saving turning solutions — for tailored advice and ordering assistance contact METAV Werkzeuge: eMail info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Technical specifications Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D221TM Type: SDJC for DCMT Indexable Inserts Compatible Insert: DCMT 0702 Clamping Design (ISO): SDJCR 1616 Shank Width: 16 mm Holder Height: 16 mm Cutting Head Width: 20 mm Overall Height: 16 mm Overall Length: 100 mm Cutting Height: 18 mm Cutting Direction: right Approach Angle: 93° Torx Key: T8 Fastening Screw: M2.5x5.5 Tool Shank Designation: H07 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts are compatible with the Turning Holder from Teknik Makina? The Turning Holder SDJC for DCMT Indexable Inserts by Teknik Makina is designed for DCMT 0702 indexable inserts, ensuring correct seating and chip control when the matching insert geometry is used. How is the Turning Holder secured and which tools are needed? The Turning Holder SDJC for DCMT Indexable Inserts uses a Torx fastening system; a Torx T8 key and an M2.5x5.5 screw are specified for reliable clamping and simple insert changes. Is the Turning Holder suitable for compact turrets and limited overhang? Yes. The Turning Holder SDJC for DCMT Indexable Inserts has a 16 mm shank width and a short overall length of 100 mm, making it suitable where space is constrained and rigidity is required. Who can I contact for technical guidance before purchasing the Turning Holder? For further technical details or to confirm suitability, contact METAV Werkzeuge — they provide expert advice for Teknik Makina tooling at info@metav-werkzeuge.com or +49 2822 7131930. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D221TM","sku":"D221TM","mpn":"D221TM","gtin13":"","name":"16mm SDJC for DCMT Indexable Inserts, 100mm Length, Right-hand, 0.2kg - Teknik Makina","description":"Turning holder for DCMT 0702 indexable inserts; 16mm overall height, 100mm length, right-hand, weight 0.2 kg; ISO designation SDJCR 1616.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/15/14/35/64/64351415e3692e16d2a37e9e/d220tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2d/7e/de/62/62de7e2d33927e49dbf32731/d220tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d0/7e/de/62/62de7ed00aced56449540ec0/d220tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For Indexable Inserts","value":"DCMT 0702"},{"@type":"PropertyValue","name":"Overall Height","value":"16 mm"},{"@type":"PropertyValue","name":"Length","value":"100 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.2 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"SDJCR 1616"},{"@type":"PropertyValue","name":"Shank","value":"H07"},{"@type":"PropertyValue","name":"Cutting Direction","value":"Right"},{"@type":"PropertyValue","name":"Cutting Angle","value":"93°"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"20 mm"},{"@type":"PropertyValue","name":"Cutting Height","value":"18 mm"},{"@type":"PropertyValue","name":"Torx Key","value":"T8"},{"@type":"PropertyValue","name":"Torx Screw","value":"M2.5x5.5"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"DCMT 0702 indexable inserts."}},{"@type":"Question","name":"What are the dimensions of the holder?","acceptedAnswer":{"@type":"Answer","text":"Overall height 16 mm and length 100 mm; cutting head width 20 mm, cutting height 18 mm."}},{"@type":"Question","name":"Is this a right- or left-hand holder?","acceptedAnswer":{"@type":"Answer","text":"Right-hand."}},{"@type":"Question","name":"What is the weight of the holder?","acceptedAnswer":{"@type":"Answer","text":"0.2 kg."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"SDJCR 1616."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/d221tm","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"SDJC for DCMT Indexable Inserts"},{"@type":"Thing","name":"General Turning Applications"}],"mentions":[{"@type":"Thing","name":"SDJCR 1616 ISO designation"},{"@type":"Thing","name":"H07 shank"},{"@type":"Thing","name":"T8 torx key"}]}]}

€17.50

16mm SDJC for DCMT Indexable Inserts, flat design, left hand, 93° cutting angle - Teknik Makina

Turning Holder SDJC for DCMT Indexable Inserts by Teknik Makina The Turning Holder SDJC for DCMT Indexable Inserts is a flat, low-profile clamp designed for secure and precise left-hand turning with DCMT 11T3 inserts in metalworking lathes. SDJC design for DCMT 11T3 inserts Flat version for low-profile turning 100 mm total length for stable support 16 x 16 mm shank for standard tool posts Left-hand cutting with 93° cutting angle Robust support for precise turning and repeatability The SDJC Turning Holder delivers stable clamping and consistent tool positioning thanks to its 100 mm Total Length and compact 16 x 16 mm cross-section. This rigidity reduces vibration and improves Surface Finish on turned components, which translates into fewer reworks and higher first-pass yield. The holder's flat profile makes it particularly suitable for operations in confined tool zones where clearance is limited. Quick insert changes and economical cutting Designed specifically for DCMT 11T3 indexable inserts, the Turning Holder enables fast insert replacement and consistent cutting geometry. DCMT inserts are triangular, reversible carbide inserts that allow multiple cutting edges per insert; this reduces tooling costs and maintenance intervals. For users unfamiliar with indexable tooling: an indexable insert is a replaceable cutting tip that is clamped into the holder, so only the insert—not the entire tool—is renewed when worn. Built for left-hand cutting and easy mounting This toolholder is configured for left-hand cutting with a 93° cutting angle, making it suitable for turning directions that demand a specific tool orientation. Assembly and service are straightforward: the clamp uses a Torx T15 key and an M3.5x8.5 Torx screw for the insert clamping, while the base plate references TA030 with an M5 fixing screw. These standardized fasteners facilitate quick setup and reduce machine downtime during tool changes. Who benefits and typical applications Workshop machinists, small-series manufacturers, and maintenance departments benefit from this flat SDJC design when working on shafts, shoulders or profiles in restricted-envelope setups. The Turning Holder is aimed at professionals seeking dependable clamping for medium-duty turning tasks and rapid insert swaps. Its combination of compact dimensions and standardized interface supports predictable cycle times and easier inventory management of consumables. Strong recommendation: choose the Teknik Makina Turning Holder SDJC for reliable clamping and improved machining consistency — for technical guidance METAV Werkzeuge offers expert support via info@metav-werkzeuge.com or by phone at +49 2822 7131930, WhatsApp +49 170 2837271. Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D157TM Alternative designation: SDJC for DCMT Indexable Inserts English product name: Turning Holder Eclass: 21181004 Suitable inserts: DCMT 11T3 Total length: 100 mm Holder ISO designation: SDJCL 1616 Shank width: 16 mm Shank height: 16 mm Cutting head width: 16 mm Cutting height: 25 mm Cutting direction: left Cutting angle: 93° Torx key: T15 Torx screw: M3,5x8,5 U plate: TA030 U plate screw: M5 Drill rod designation: H11-F Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which sizes are supported? The Turning Holder from Teknik Makina is designed for DCMT 11T3 indexable inserts; this means standard DCMT triangular inserts fit securely and provide multiple cutting edges for economical use. Can the SDJC Turning Holder be used in tight toolpost arrangements? Yes, the flat SDJC Turning Holder by Teknik Makina is a low-profile variant intended for limited-clearance setups, offering a compact 16 x 16 mm shank that suits many standard tool posts. How is an insert secured in the Turning Holder SDJC and what tools are required? Inserts are clamped using the supplied Torx fastener system: the Turning Holder uses a Torx T15 key and M3.5x8.5 Torx screw for secure and repeatable fixation of DCMT inserts. Who can help if I need assembly advice for my Teknik Makina Turning Holder? METAV Werkzeuge provides competent consultation for the Teknik Makina Turning Holder; contact their team at info@metav-werkzeuge.com or call +49 2822 7131930 for technical support and application guidance. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D157TM","sku":"D157TM","mpn":"D157TM","gtin13":"","name":"Turning Holder SDJC for DCMT Indexable Inserts, Flat, Left, 93° - Teknik Makina","description":"16mm SDJC turning holder for DCMT 11T3 indexable inserts; flat design, left cutting direction, 93° cutting angle, 100mm overall length, 0.18 kg.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/59/40/bb/66/66bb40598ce61d4fe144ccc2/d154tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/59/40/bb/66/66bb40598ce61d4fe144ccc1/d154tm-technische-zeichnung.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/58/40/bb/66/66bb4058849b5d97e5677066/d154tm-artikelliste.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Type","value":"SDJC"},{"@type":"PropertyValue","name":"Compatible Inserts","value":"DCMT 11T3"},{"@type":"PropertyValue","name":"Design","value":"Flat"},{"@type":"PropertyValue","name":"Cutting Direction","value":"Left"},{"@type":"PropertyValue","name":"Cutting Angle","value":"93°"},{"@type":"PropertyValue","name":"Overall Length","value":"100 mm"},{"@type":"PropertyValue","name":"Width","value":"16 mm"},{"@type":"PropertyValue","name":"Height","value":"16 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"16 mm"},{"@type":"PropertyValue","name":"Cutting Height","value":"25 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.18 kg"},{"@type":"PropertyValue","name":"Clamping Holder ISO","value":"SDJCL 1616"},{"@type":"PropertyValue","name":"Shank Designation","value":"H11-F"},{"@type":"PropertyValue","name":"Torx Key","value":"T15"},{"@type":"PropertyValue","name":"Torx Screw","value":"M3.5x8.5"},{"@type":"PropertyValue","name":"U Plate","value":"TA030"},{"@type":"PropertyValue","name":"U Plate Screw","value":"M5"},{"@type":"PropertyValue","name":"Net Price","value":"35"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with DCMT 11T3 indexable inserts."}},{"@type":"Question","name":"What is the cutting direction?","acceptedAnswer":{"@type":"Answer","text":"Left cutting direction (left hand)."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"93° cutting angle for versatile turning operations."}},{"@type":"Question","name":"What are the main dimensions?","acceptedAnswer":{"@type":"Answer","text":"16 mm width and height, 100 mm overall length; cutting head width 16 mm and cutting height 25 mm."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder SDJC Series"},{"@type":"Thing","name":"Allround Clamping Holders"},{"@type":"Thing","name":"Suitable for DCMT Inserts"}],"mentions":[{"@type":"Thing","name":"SDJCL 1616"},{"@type":"Thing","name":"TA030 U Plate"},{"@type":"Thing","name":"Torx T15"}]}]}

€35.00

16mm Turning Holder for 16 ER Inserts, 100mm Length, Right - Teknik Makina

Turning Holder (Klemmhalter) for External Turning — Teknik Makina The Turning Holder is a sturdy external turning tool designed for 16 ER indexable inserts, offering precise clamping and stable cutting performance in general metalworking applications. Turning Holder AL 1616 by Teknik Makina For 16 ER indexable inserts Overall length 100 mm for stable cutting Right-hand cutting direction for external turning 16 x 16 mm clamping cross-section for firm hold Precision clamping for consistent external cuts The AL 1616 design provides a compact, rigid clamping geometry that reduces vibration and runout during machining. This results in consistent surface quality and repeatable tolerances even under intermittent cutting conditions. The robust clamping interface is particularly beneficial when maintaining dimensional accuracy is critical, for example in batch turning operations or when machining stepped shafts. Right-hand configuration tailored to external turning tasks Configured for right-hand cutting, this holder is optimized for conventional external turning setups. Right-hand direction refers to the tool orientation and feed direction during the cut, which simplifies toolpath planning and fixture design on standard lathes. For operatives unfamiliar with the term, right-hand cutting means the tool removes material when moved from left to right relative to the workpiece, ensuring predictable chip flow and tool engagement. Stable dimensions that support reliable tooling setups With an overall length of 100 mm and a 16 x 16 mm cross-section, the holder balances reach and stiffness to minimize deflection in typical workshop environments. A 22 mm cutting height provides compatibility with common toolpost setups and ensures the insert edge aligns correctly with the machine center height. These dimensions help reduce set-up time and provide a secure basis for repeatable tool indexing. Clear compatibility: what "16 ER" and indexable inserts mean The term 16 ER identifies the family of indexable inserts that fit this clamping system; inserts are replaceable cutting tips that can be rotated or indexed when one edge wears, extending usable life. Using indexable inserts simplifies maintenance and reduces tooling costs compared with solid-carbide tools. For users new to insert systems, this means faster changeovers and consistent cutting edges without regrinding. Ideal users and workshop scenarios for this holder This Turning Holder is aimed at professional workshops and skilled machinists who require a dependable external turning solution for medium-duty turning tasks. It suits small-batch production, repairs, and toolrooms where repeatability and ease of insert replacement are priorities. For personalized application advice or to confirm fit with specific machines, METAV Werkzeuge provides technical consultation and support. Choose Teknik Makina’s Turning Holder for dependable external turning — for individual advice and setup support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Klemmhalter Brand: Teknik Makina SKU: D259TM For Indexable Inserts: 16 ER ISO designation: AL 1616 Alternate designation: H16- ER16 Overall length: 100 mm Width: 16 mm Height: 16 mm Cutting head width: 16 mm Cutting height: 22 mm Cutting direction: Right-hand Weight: 0.25 kg GTIN: 4061905152511 Condition: New Availability: In Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder and how do I identify them? The Turning Holder from Teknik Makina is designed for 16 ER indexable inserts; the designation "16 ER" indicates the insert family and helps you select compatible parts. Matching inserts are typically listed by insert code and profile—if uncertain, provide insert specifications to METAV Werkzeuge for confirmation. Is the Turning Holder suitable for general external turning on standard lathes? Yes, the Teknik Makina Turning Holder is intended for external turning and configured for right-hand cutting, making it suitable for common lathe setups. It offers firm clamping and dimensional stability for regular turning tasks and small-series production. What are the key dimensions I need to check before ordering the Turning Holder? Important dimensions for the Turning Holder include the 100 mm overall length, 16 x 16 mm clamping cross-section, and 22 mm cutting height; these determine fit with your toolpost and insert geometry. If you need help verifying compatibility with your machine, METAV Werkzeuge provides technical assistance. Can METAV help me choose the right holder or inserts for my application? Absolutely. METAV Werkzeuge offers expert advice for tooling selection and setup. Contact METAV at info@metav-werkzeuge.com, call +49 2822 7131930, or message via WhatsApp +49 170 2837271 for tailored recommendations based on your machining task. 100mm Turning Holder for 16 ER Inserts, 16mm Width, Right-Hand - Teknik Makina

€33.00

170mm DCLN Turning Holder for CN-- 1204 Inserts, 95° left, DCLNL 3232 - Teknik Makina

Turning Holder (Klemmhalter) — DCLNL 3232 for CN-- 1204 Indexable Inserts The Turning Holder is a precision clamping tool designed for left-hand turning with CN-- 1204 indexable inserts, suited to workshop and production lathe operations. Compatible with CN-- 1204 indexable inserts DCLNL 3232 ISO designation 170 mm overall length for extended reach 95° cutting angle for stable support 32 x 32 mm shank for rigid clamping Designed for Reliable Clamping and Rigidity Built around the DCLNL 3232 geometry, this toolholder offers a compact shank of 32 x 32 mm and a 40 mm wide cutting head that together maximise Rigidity during machining. The robust form factor reduces vibration and improves surface finish, so operators benefit from consistent results even under interrupted cuts. The construction is tailored to support the CN-- 1204 insert format while keeping tool overhang minimal for better tool life and repeatable accuracy. Precision Tailored for Left-Hand Turning Operations With a defined 95° cutting angle and a left-hand cutting direction, the holder is optimised for stable engagement and predictable chip flow in facing and external turning tasks. It accepts CN-- 1204 indexable inserts, which are replaceable carbide tips that simplify maintenance and reduce downtime. For users less familiar with indexable tooling: these inserts allow fast replacement without regrinding, keeping setups accurate and productive. Practical Applications and Ideal Users This Turning Holder is designed for Machine Shops, maintenance departments and production lines that require dependable left-hand tooling for turning operations. It is particularly useful where repeatability and quick insert changes matter — for example in batch production or toolrooms handling mixed material runs. The toolholder’s dimensions and geometry prioritise stability, making it a suitable choice for technicians focused on throughput and surface quality. Quick Setup, Compatibility and Identification Installation is straightforward thanks to the standard ISO designation DCLNL 3232, which helps in matching clamping fixtures and turret setups. The holder is listed with the shank/bead designation P12 for compatibility checks and has a total length of 170 mm, providing a balance between reach and stiffness. A GTIN (EAN) is available for ordering and inventory control. For precise integration into your workflow, verify turret clearance and insert orientation before first use. Choose the Teknik Makina Turning Holder for dependable, precision left-hand machining — contact METAV Werkzeuge for personalised technical advice at info@metav-werkzeuge.com or call +49 2822 7131930. Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D305TM Compatible Inserts: CN-- 1204 ISO Designation: DCLNL 3232 Shank Width: 32 mm Shank Height: 32 mm Cutting Head Width: 40 mm Overall Length: 170 mm Cutting Direction: Left Cutting Angle: 95° Shank/Bar Designation: P12 Weight: 1.379 kg Availability: In stock Condition: New GTIN / EAN: 4061905151439 Label: Klemmhalter DCLNL 3232 95° CN-- 1204 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which orientation is required? The Turning Holder by Teknik Makina is designed for CN-- 1204 indexable inserts and is configured for left-hand cutting; ensure the insert is mounted according to the left-hand orientation to achieve correct chip flow and cutting geometry. Can the DCLNL 3232 holder be used on standard lathe turrets? Yes, the DCLNL 3232 ISO designation of this Klemmhalter matches common turret interfaces; confirm turret slot size and clearance before installation to guarantee secure clamping and optimal performance. How does the 95° cutting angle benefit machining with this Turning Holder? A 95° cutting angle provides enhanced support at the cutting edge, improving stability and reducing deflection; Teknik Makina’s holder geometry helps deliver improved surface finishes during facing and external turning operations. Who can assist if I need further technical information about the Klemmhalter? If you are uncertain whether the Turning Holder meets your requirements or need additional technical data, METAV Werkzeuge offers expert advice — contact them at info@metav-werkzeuge.com, by phone +49 2822 7131930, or via WhatsApp +49 170 2837271. 95° DCLNL 3232 Turning Holder for CN-- 1204 Indexable Inserts, 170 mm Length, Left Cut - Teknik Makina

€56.00

170mm DCLN Turning Holder for CN-- 1606 Indexable Inserts, 95° Left - Teknik Makina

Teknik Makina Klemmhalter — Turning Holder The Klemmhalter is a precision Turning Holder designed for CN-- 1606 indexable inserts, delivering a 95° Cutting Angle and robust support for left-hand turning applications. Compatible with CN-- 1606 indexable inserts 170 mm Overall Length for increased Stability DCLNL 3232 ISO designation for precise fit 95° Cutting Angle for consistent chip control Left-hand Cutting Direction for dedicated operations Durable design for reliable clamping and stability The Holder is engineered with a compact 32 mm Width and 32 mm Height, combining a solid cross-section with a 40 mm Cutting Head Width to ensure mechanical Stability during machining. This structural design reduces vibration and supports consistent Surface Finish when turning, so tooling life and workpiece quality are improved. The robust construction makes the Holder suitable for demanding operations where firm clamping and repeatable Geometry are required. Precision fit and easy integration with indexable inserts Thanks to the DCLNL 3232 ISO designation and clear compatibility with CN-- 1606 inserts, the Holder offers repeatable positioning and simple tool changeover. The predetermined geometry maintains the correct tool Projection and 95° Cutting Angle, which aids in Chip Control and helps achieve accurate Turning Dimensions. For workshops that prioritise setup speed and interchangeability, this Holder minimises adjustments and supports efficient machining cycles. Optimised for left-hand turning operations With a dedicated left-hand Cutting Direction, this Turning Holder is tailored for specific machining setups where orientation matters. A consistent Cutting Angle and a well-defined insert seat contribute to stable Cutting Forces and predictable tool behaviour. Users who perform reversing operations or require dedicated left-hand tooling will find the Holder enhances process Reliability and reduces the need for custom fixturing. Who benefits from this Holder and typical use cases The product targets professional machinists and production environments that rely on indexable tooling for small to medium batch turning. The Holder is especially relevant for workshops working with standard CN-- 1606 inserts and requiring a 170 mm Overall Length for reach and clearance. Its combination of fit, geometry and dedicated left-hand orientation makes it a good choice for component turning where precision and repeatability are priorities. For demanding turning applications, choose the Teknik Makina Klemmhalter with its 95° Cutting Angle — METAV Werkzeuge offers expert advice and personalised support: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical information Designation: Klemmhalter Brand/Manufacturer: Teknik Makina SKU: D306TM GTIN: 4061905151453 Compatible Inserts: CN-- 1606 ISO designation: DCLNL 3232 Secondary designation: P16 Overall length: 170 mm Width: 32 mm Height: 32 mm Cutting head width: 40 mm Cutting angle: 95° Cutting direction: left Weight: 1.407 kg Availability: in Stock Condition: new Label: Klemmhalter DCLNL 3232 95° CN-- 1606 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Klemmhalter from Teknik Makina (Turning Holder)? The Klemmhalter by Teknik Makina is designed to accept CN-- 1606 indexable inserts; this Turning Holder features the DCLNL 3232 seat to ensure a secure and repeatable fit with those inserts. Is the Klemmhalter suitable for left-hand turning setups? Yes, the Teknik Makina Klemmhalter is specified for left-hand Cutting Direction and the 95° Cutting Angle supports stable chip formation and control in left-hand turning operations. What dimensions of the Holder are most relevant for integration into my toolpost? Important dimensions for integration are the 170 mm Overall Length, 32 mm Width, 32 mm Height and 40 mm Cutting Head Width; these values describe the Holder’s footprint and reach for planning toolpost clearance. Can METAV Werkzeuge provide additional technical support for the Klemmhalter? If further technical details are needed for the Teknik Makina Klemmhalter or assistance with tool selection, METAV Werkzeuge offers competent consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930. 170mm DCLN Turning Holder for CN-- 1606 Indexable Inserts, 95° Left - Teknik Makina

€58.00

170mm DDHN for DN-- 1506 Indexable Inserts, 107.5° cutting angle, right-hand - Teknik Makina

Klemmhalter — Turning Holder by Teknik Makina The Turning Holder is a right-hand toolholder for DN-- 1506 indexable inserts, designed for precise turning operations in metalworking and workshop environments. Turning Holder for DN-- 1506 indexable inserts 170 mm overall length for secure tool mounting Right-hand cutting direction with 107.5° cutting angle 32 mm shank width and height for stable clamping 40 mm cutting head width for versatile operations Stable clamping for consistent machining results The holder features the DDHNR 3232 ISO designation and a compact 32 mm shank that delivers stable clamping and reduced vibration during cuts. This stability translates into improved Surface Finish and longer Insert Life when machining steels and cast irons. The robust build supports reproducible set-ups and reliable repeatability in serial production, making it suitable for both single-part jobs and batch runs. Geometry optimised for chip control and finish With a cutting angle of 107.5° and a right-hand cutting direction, the geometry is tuned for predictable chip flow and controlled cutting forces. That engineering reduces built-up edge and helps to maintain dimensional accuracy on turned profiles. The result is fewer rework cycles and a better first-pass quality on turned components, which benefits shops focused on efficiency and consistent tolerances. Practical design for everyday workshop use At an overall length of 170 mm, the toolholder balances accessibility and rigidity, allowing comfortable setup in standard lathes while maintaining the stiffness required for heavier cuts. The 40 mm cutting head width provides room for a variety of DN-- 1506 indexable inserts, enabling quick insert changes and flexible machining strategies. The design supports quick clamping and straightforward alignment to save time during tool changes. Compatible inserts and clear guidance for users This toolholder accepts DN-- 1506 indexable inserts; indexable inserts are replaceable cutting tips that allow rapid renewal of the cutting edge without replacing the entire toolbody. For shops new to indexable tooling, choosing the correct insert grade and geometry is key to performance. The holder’s ISO designation and shank dimensions simplify selection and ensure compatibility with common Insert Types used in turning operations. Choose Teknik Makina for dependable toolholding — for tailored technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Information Bezeichnung: Klemmhalter / Turning Holder Brand: Teknik Makina SKU: D098TM For Indexable Inserts: DN-- 1506 Compatible Inserts: DN-- 1506 Overall Length: 170 mm Weight: 1.29 kg ISO Designation: DDHNR 3232 Secondary Designation: P15 Shank Width: 32 mm Shank Height: 32 mm Cutting Head Width: 40 mm Cutting Angle: 107.5° Cutting Direction: Right GTIN: 4061905150807 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Klemmhalter Turning Holder from Teknik Makina? The Klemmhalter Turning Holder by Teknik Makina is designed for DN-- 1506 indexable inserts; using the specified DN-- 1506 Inserts ensures correct seating, reliable clamping and predictable cutting performance. Is the Klemmhalter Turning Holder suitable for heavy cuts? Yes, the Turning Holder’s 32 mm shank and 40 mm cutting head width provide the necessary stiffness for tougher turning operations, but final performance depends on machine rigidity and chosen insert grade. How do I mount the inserts in the Klemmhalter Turning Holder? Insert mounting follows standard procedures for indexable systems: clean the seat, place the DN-- 1506 insert in position, and tighten the clamping screw to the manufacturer’s torque. Teknik Makina specifications and METAV Werkzeuge can provide torque and setup guidance. Who can I contact for technical support and advice? For detailed technical consultation about the Klemmhalter Turning Holder, METAV Werkzeuge offers expert advice — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271. 107.5° Turning Holder DDHNR 3232 for DN-- 1506 Indexable Inserts, 170 mm Length, Right - Teknik Makina

€56.00

170mm DDJNR Turning Holder for DN-- 1506, 93° Right, DDJNR 3232 - Teknik Makina

Turning Holder (Klemmhalter) by Teknik Makina A Turning Holder engineered for secure clamping of DN-- 1506 indexable inserts, ideal for precise right-hand turning tasks in workshop and production environments. DDJNR 3232 ISO design for rigid clamping Compatible with DN-- 1506 indexable inserts 170 mm overall length for extended reach 93° cutting angle for accurate right-hand cuts 32 x 32 mm shank for stable machine mounting Precision clamping for consistent machining results The Turning Holder (Klemmhalter) employs an ISO DDJNR 3232 design to deliver rigid clamping, which reduces vibration and improves surface finish on turned parts. This stability translates directly into longer tool life for the indexable inserts and fewer rework cycles. For operators unfamiliar with ISO codes: DDJNR identifies the holder Geometry and clamping method, ensuring compatibility with inserts specified for DN-- 1506. The result is predictable machining performance and repeatable tolerances. Designed for DN-- 1506 inserts and right-hand operations Built specifically for DN-- 1506 indexable inserts, the holder accommodates standard insert geometry so setup is straightforward and repeatable. A 93° cutting angle supports clean right-hand cuts, helping to control chip flow and cutting forces. This makes the tool holder well suited to turning tasks where directional cutting stability is essential. For users new to indexable tooling: indexable inserts are replaceable cutting tips that allow quick renewal without regrinding, reducing machine downtime. Suitable for professional workshops and production lines Workshops and production facilities benefit from the turning holder’s 32 mm shank cross-section and 170 mm overall length, which offer compatibility with many turret and toolpost setups and provide extended reach for deeper cuts. Maintenance routines become simpler because insert changes are fast and tool repeatability is high. This component is targeted at machinists seeking robust clamping and reliable repeatability rather than occasional hobby use. Key design features that reduce setup time and increase uptime Attention to functional details—such as a 40 mm cutting-head width and the P15 secondary designation for the clamping interface—helps to minimise setup adjustments and secures the insert firmly during operation. By focusing on a compact, standardised geometry, the holder reduces the need for bespoke fixtures and supports efficient tool management. Production teams gain from predictable tool behaviour and lower variance between setups. Strong recommendation: Choose the Teknik Makina Turning Holder for reliable, repeatable turning performance and contact METAV Werkzeuge for expert consultation via eMail info@metav-werkzeuge.com or phone +49 2822 7131930 — WhatsApp support is also available at +49 170 2837271. Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D174TM Für Wendeschneidplatten: DN-- 1506 Passende Wendeplatten: DN-- 1506 Gesamtlänge: 170 mm Gewicht: 1.345 kg ISO Bezeichnung: DDJNR 3232 Bezeichnung 2: P15 Breite: 32 mm Höhe: 32 mm Schneidekopf Breite: 40 mm Schnittwinkel: 93° Schnittrichtung: right GTIN: 4061905150692 Label: Klemmhalter DDJNR 3232 93° DN-- 1506 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Is the Turning Holder from Teknik Makina compatible with DN-- 1506 inserts? Yes, the Teknik Makina Turning Holder (Klemmhalter) is designed specifically for DN-- 1506 indexable inserts and ensures correct seating and secure clamping for reliable cutting performance. What is the overall length and how does it affect use? The Teknik Makina Turning Holder has an overall length of 170 mm; this extended reach supports deeper turning operations while maintaining stability when mounted with a 32 x 32 mm shank. Which cutting direction is supported by this holder? The Teknik Makina Turning Holder (Klemmhalter) is configured for right-hand cutting, using a 93° cutting angle to promote precise chip control and consistent surface finish. Who can I contact for technical advice before purchase? For expert guidance on the Teknik Makina Turning Holder and its suitability for your applications, METAV Werkzeuge offers comprehensive consultation — eMail info@metav-werkzeuge.com, phone +49 2822 7131930, or WhatsApp +49 170 2837271. 170mm DDJNR Turning Holder for DN-- 1506, 93° Right, DDJNR 3232 - Teknik Makina

€56.00

170mm DSSNR 3232 Turning Holder for SNMG 1204, 45°, right - Teknik Makina

Turning Holder (Klemmhalter) — Teknik Makina DSSNR for SNMG Indexable Inserts The Turning Holder is a right-hand DSSNR 3232 toolholder designed to secure SNMG 1204 indexable inserts for precise external turning in production and workshop environments. Turning Holder for SNMG 1204 inserts ISO designation DSSNR 3232 for stable clamping 170 mm overall length for reach and rigidity 45° cutting angle for controlled chip flow 40 mm shank width and 32 mm head width Precision clamping that reduces setup variation A robust clamping concept ensures consistent seating of the SNMG 1204 insert and reduces micro-movement during cuts. The ISO designation DSSNR 3232 signals a standardized geometry that simplifies tool selection and repeatability across setups. This results in fewer re-touches and more predictable part quality without needing constant readjustment. Increased reach while maintaining stiffness for heavier cuts With an overall length of 170 mm and a shank width of 40 mm, the toolholder balances reach and rigidity to support deeper overhangs while limiting deflection. The compact head width of 32 mm contributes to a stable interface between insert and holder, enabling consistent surface finish even under intermittent heavy cuts. This design is especially suitable for small-batch CNC turning where accessibility and stiffness matter. Controlled cutting geometry for reliable chip control A 45° cut angle combined with a right-hand cutting direction directs chips away from the workpiece and toolholder, improving surface integrity and reducing recutting. The cutter head and insert pocket are engineered to maintain the correct rake and clearance for SNMG-style inserts, translating into steady tool life and predictable performance on common ferrous and non-ferrous materials. Practical compatibility and application focus The holder is optimized for use with SNMG 1204 indexable inserts and fits setups where a DSSNR-type mounting is specified. Workshops running lathe operations, maintenance shops, and small production lines will value the simple interchangeability and proven mechanical interface. The component is supplied by Teknik Makina, aiming to integrate seamlessly into established tooling systems. Strong recommendation: Choose the Teknik Makina Turning Holder for dependable external turning and contact METAV Werkzeuge for expert application support — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271 Klemmhalter (Turning Holder) Brand: Teknik Makina SKU: D205TM For Indexable Inserts: SNMG 1204 Compatible Inserts: SNMG 1204 Overall Length: 170 mm Weight: 1.28 kg ISO designation: DSSNR 3232 Secondary designation: P12 Shank Width: 40 mm Height: 32 mm Cutting Head Width: 32 mm Cutting Direction: right Cutting Angle: 45° GTIN: 4061905052613 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Teknik Makina Turning Holder (Klemmhalter) is designed for SNMG 1204 indexable inserts and accepts standard SNMG 1204 geometries for straightforward mounting and replacement. Is the DSSNR 3232 holder suitable for heavy turning operations? The DSSNR 3232-design Turning Holder by Teknik Makina offers a 170 mm length and 40 mm shank width that provide a good balance of reach and stiffness for many external turning tasks, making it suitable for moderate to demanding cuts when used with appropriate inserts. Which cutting direction does the Teknik Makina Klemmhalter support? The Teknik Makina Klemmhalter (Turning Holder) is configured for right-hand cutting, optimized to work with SNMG 1204 inserts in standard right-handed turning operations. Can METAV Werkzeuge assist with tool selection for this holder? Yes. METAV Werkzeuge provides comprehensive advice for tool and insert pairing for the Teknik Makina Turning Holder; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support. 170mm DSSNR 3232 Turning Holder for SNMG 1204, 45°, Right - Teknik Makina

€56.00

170mm DSSNR 3232 Turning Holder for SNMG 1906 inserts, 45° - Teknik Makina

Turning Holder DSSNR for SNMG Indexable Inserts by Teknik Makina The Turning Holder secures SNMG 1906 indexable inserts for right-hand turning operations, delivering a 45° cutting angle and a compact 170 mm Overall Length for stable, precise machining. For SNMG 1906 indexable inserts ISO DSSNR 3232 designation Overall Length 170 mm 45° Cutting Angle for precise turning Right-hand Cutting Direction Precision and stability for demanding turning applications The Turning Holder from Teknik Makina is engineered to provide exceptional Rigidity and vibration damping during heavy or finish turning. Its 45° Cutting Angle supports improved Chip Flow and reduces radial cutting forces, which results in smoother surface quality and longer Tool Life. By focusing on stability rather than excessive overhang, this clamping solution helps achieve consistent results on both roughing and finishing passes while keeping setup times low. Optimised compatibility with SNMG 1906 inserts This holder is specifically designed for SNMG 1906 indexable inserts and conforms to the DSSNR 3232 ISO designation, enabling quick insert changes and reliable seating. Compatibility with common insert geometries reduces inventory complexity and makes the toolholder a cost-effective choice for shops that rely on standardized tooling. The secure clamping mechanism minimises insert movement under load, helping to protect the cutting edge and maintain repeatable machining accuracy. Compact build that enhances workshop flexibility With an Overall Length 170 mm and a nominal Width of 40 mm, the toolholder combines compactness with sufficient mass to dampen vibrations. The moderate Height and a Schneidekopf Width of 32 mm provide clearance for a variety of setups while preserving the stiffness required for precise turning. Because the design balances Size and Mass, machinists benefit from improved access in tight work envelopes without sacrificing the mechanical stability needed for fine surface finishes. Who benefits and how to integrate it into your workflow Machine Shops and professional turning operators will appreciate the Turning Holder’s focus on predictable performance and simple handling. Its Right-hand Cutting Direction and 45° geometry make it suitable for common external turning tasks. Integrating this holder into existing tool systems is straightforward when the correct SNMG inserts are used, and maintenance is limited to routine checks of the clamping screws and seating surfaces. For implementation advice tailored to specific machines or materials, expert support is available. Choose Teknik Makina’s Turning Holder to standardise your turning operations and contact METAV Werkzeuge for personalised technical consultation at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: D206TM For indexable inserts: SNMG 1906 ISO designation: DSSNR 3232 Secondary designation: P19 Overall Length: 170 mm Width: 40 mm Height: 32 mm Schneidekopf Width: 32 mm Cutting Angle: 45° Cutting Direction: right Weight: 1.383 kg GTIN: 4061905052620 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts are compatible with the Turning Holder from Teknik Makina? The Turning Holder is compatible with SNMG 1906 indexable inserts and follows the DSSNR 3232 ISO designation, ensuring easy replacement and standardised seating for common turning tasks. Can the Teknik Makina Turning Holder be used for heavy-duty turning? Yes, the Turning Holder is designed with increased Rigidity and a 45° Cutting Angle to handle demanding external turning operations while maintaining surface quality under moderate to high cutting loads. How do I mount an insert in this Turning Holder? Insert mounting for the Turning Holder requires seating the SNMG 1906 insert in the pocket, ensuring correct orientation for the Right-hand Cutting Direction, and securing it with the designated clamp and screw specified by Teknik Makina. Who can help if I need technical advice for integrating the Turning Holder? METAV Werkzeuge provides comprehensive technical support for the Turning Holder by Teknik Makina; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised assistance and application recommendations. 170mm DSSNR 3232 Turning Holder for SNMG 1906 Indexable Inserts, 45° - Teknik Makina

€72.00

170mm MTJNL 3232 Turning Holder for TN-- 1604, 93° cutting angle, left - Teknik Makina

Turning Holder (Klemmhalter) for TN-- 1604 Indexable Inserts by Teknik Makina The Turning Holder (Klemmhalter) is a robust tool holder designed for TN-- 1604 indexable inserts, offering stable left-hand cutting for precision turning applications. Compatible with TN-- 1604 indexable inserts 170 mm Overall Length for stable reach 32 mm Shank for secure clamping 40 mm Cutting Head for precise insert seating Left-hand Cutting with 93° Cutting Angle Precision and Stability for Demanding Turning Tasks The Holder's 170 mm Overall Length and 32 mm Shank deliver increased rigidity and reduced vibration, which directly improves Surface Finish and extends Insert Life. For workshops that require repeatable results on turned parts, the larger Shank Diameter provides reliable support during heavy cuts and interrupted machining. This stability translates into fewer setup adjustments and more consistent component tolerances, saving time on rework. Secure Insert Seating and Clear Compatibility Designed specifically for TN-- 1604 indexable inserts, the tool features a 40 mm Cutting Head and ISO designation MTJNL 3232, ensuring correct seating and clamping of the insert. The Mounting Interface (P16 reference) simplifies replacement and alignment, reducing downtime when changing Inserts. Customers unfamiliar with TN-- 1604 should note that this designation refers to a standardized insert geometry and size, making it straightforward to source compatible cutting grades for different materials. Optimised for Left-Hand Cutting and Defined Cutting Angle With a 93° Cutting Angle and Left-hand Cutting orientation, this holder is tailored for specific turning operations where tool geometry affects chip flow and tool engagement. The defined angle helps guide chip evacuation away from the workpiece, improving surface integrity on long or slender parts. For shops performing repetitive internal or external turning with left-hand setups, the clear geometric specification eases process planning and toolpath programming. Built for Professional Workshops; Support and Availability The turning tool is supplied by Teknik Makina and is listed as in stock, making it suitable for professional shops and industrial users who need dependable lead times. Routine maintenance is straightforward: ensure clean contact surfaces and correct torque on the clamping screws to maintain repeatable seating. If technical compatibility or specific application data is required, METAV Werkzeuge offers expert consultation and support for selecting the correct holder and insert combination. For reliable left-hand turning with TN-- 1604 inserts we recommend the MTJNL 3232 Turning Holder from Teknik Makina — for technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D336TM Für Wendeschneidplatten: TN-- 1604 Passende Wendeplatten: TN-- 1604 Gesamtlänge: 170 mm ISO Bezeichnung: MTJNL 3232 Bezeichnung 2: P16 Breite: 32 mm Höhe: 32 mm Schneidekopf Breite: 40 mm Schnittwinkel: 93° Schnittrichtung: Left Gewicht: 1.36 kg Verfügbarkeit: in Stock Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder (Klemmhalter) from Teknik Makina? The Turning Holder (Klemmhalter) by Teknik Makina is designed for TN-- 1604 indexable inserts, so use inserts specified as TN-- 1604 to ensure correct fit and secure clamping. Can the Turning Holder (Klemmhalter) from Teknik Makina be used for heavy cuts? Yes, the robust 32 mm Shank and 170 mm Overall Length of the Turning Holder (Klemmhalter) from Teknik Makina provide the rigidity needed for many heavy turning operations when paired with appropriate inserts. Is the MTJNL 3232 designation important when ordering the Turning Holder (Klemmhalter)? Ordering the MTJNL 3232 variant ensures you receive the ISO-specified interface and geometry intended by Teknik Makina for correct insert seating and consistent performance. Who can I contact if I need help selecting the right Turning Holder (Klemmhalter)? If you need assistance choosing the correct Turning Holder (Klemmhalter) or require detailed technical data, METAV Werkzeuge offers expert consultation — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 93° MTJNL 3232 Turning Holder for TN-- 1604, 170mm, left, 32x32mm – Teknik Makina

€56.00

170mm MTJNR 3232 Turning Holder for TN-- 1604, 93° cutting angle, right-hand - Teknik Makina

Turning Holder by Teknik Makina The Turning Holder is a clamping tool for TN-- 1604 indexable inserts, engineered for precise right-hand turning operations in industrial and workshop environments. Turning Holder by Teknik Makina Compatible with TN-- 1604 indexable inserts 170 mm overall length for stable setup 32 x 32 mm shank fits standard toolposts 93° cutting angle for precise, repeatable cuts Precise Turning Performance for Demanding Machining Built to deliver consistent results, this clamping tool offers a 93° cutting angle that supports accurate chip control and repeatable toolpaths. The geometry reduces deflection during heavy cuts, which improves surface finish and dimensional accuracy. For operators who require predictable Turning outcomes, the robust tool geometry directly translates into fewer rework cycles and higher first-pass yield. Straightforward Compatibility Reduces Setup Time Designed specifically for use with TN-- 1604 indexable inserts, the holder ensures quick insert changes and secure seating. The ISO designation MTJNR 3232 and the secondary designation P16 match common toolpost systems, enabling rapid replacement without complex adapters. This compatibility shortens machine downtime and streamlines tool inventory management for production-focused shops. Compact, Stable Design for Reliable Clamping With a shank size of 32 x 32 mm and a cutting-head width of 40 mm, the holder balances stiffness and accessibility at the cutting zone. The 170 mm overall length provides enough reach for most turning setups while maintaining rigidity to resist vibration. These dimensional choices help maintain cutting stability, which is particularly beneficial when machining medium-sized workpieces or when consistent concentricity is required. Who Benefits from This Clamping Solution Recommended for machinists and production engineers, this tool is suited to workshops that run indexable-insert turning operations and seek a durable, easy-to-service holder. The right-hand cutting direction and sturdy construction make it appropriate for standard Turning tasks in metalworking, where repetitive, reliable performance is a priority. We recommend the Teknik Makina Turning Holder as a dependable option for right-hand turning applications; for tailored advice or further technical data, contact METAV Werkzeuge — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Designation: Turning Holder Brand: Teknik Makina SKU: D198TM Compatible Indexable Inserts: TN-- 1604 ISO Designation: MTJNR 3232 Secondary Designation: P16 Overall Length: 170 mm Shank Width: 32 mm Shank Height: 32 mm Cutting Head Width: 40 mm Cutting Direction: right Cutting Angle: 93° Weight: 1.36 kg GTIN: 4061905151101 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is compatible with TN-- 1604 indexable inserts, enabling fast insert changes and secure clamping for standard Turning operations. What are the main dimensions of the Teknik Makina Turning Holder? Dimensions for the Teknik Makina Turning Holder include a 170 mm overall length, a 32 x 32 mm shank, and a 40 mm cutting-head width, designed to balance reach and rigidity. Is the Turning Holder suitable for right-hand cutting only? Yes, the Turning Holder is specified for right-hand cutting direction, making it ideal for setups that require right-hand Turning motions. Who can I contact for technical advice about the Turning Holder? For expert guidance on the Turning Holder, METAV Werkzeuge offers comprehensive consultation — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271. 170mm MTJNR 3232 Turning Holder for TN-- 1604, 93° Cutting Angle, Right-Hand - Teknik Makina

€56.00

170mm PCLN for CNMG Indexable Inserts, 95° cutting angle, left-hand, PCLNL 3232 - Teknik Makina

Klemmhalter — Turning Holder by Teknik Makina The Klemmhalter Turning Holder is a robust clamping solution designed for left-hand turning operations with CNMG 1204 indexable inserts, delivering stable tool engagement and repeatable machining results. For CNMG 1204 indexable inserts 170 mm overall length 95° cutting angle for stable cuts 32 x 32 mm shank for rigid clamping Left-hand cutting direction Robust Construction for Reliable Machining Built for consistent performance, this Turning Holder features the PCLNL 3232 ISO designation and a 170 mm overall Length that supports stable tool Overhang and reduced vibration. Operators benefit from improved surface Finish and longer Insert Life because the design minimizes deflection under load. The compact Schneidkopf Width contributes to predictable chip flow and easier tool setup in confined turret stations. Precise Compatibility and Secure Clamping Engineered specifically for CNMG 1204 Indexable Inserts, the Holder’s 32 mm Shank Width and 32 mm Shank Height ensure Rigid Clamping and repeatable seating of the Insert pocket. This stability translates into consistent Cutting Forces and less rework on turned Parts. Installers will find alignment straightforward, reducing Setup Time and enabling faster spindle ramp-up in production cycles. Cutting Geometry That Improves Cycle Quality With a 95° Cutting Angle and left-hand orientation, the toolholder guides the Insert to deliver predictable chip formation and improved Dimensional Control on internal and external Turning. The geometry is optimised for chip evacuation and steady cutting engagement, which helps maintain tool-edge integrity and consistent surface Finish across longer runs. Ideal Users and Application Scenarios This Turning Holder is aimed at Precision Workshops, CNC Turning Centers, and maintenance teams that demand dependable Turning performance with CNMG Inserts. It suits serial production as well as one-off repair jobs where tool Stability and quick Insert changes matter. Integration into existing toolline setups is straightforward thanks to the standard ISO designation and compact Schneidkopf dimensions. Choose Teknik Makina’s robust Klemmhalter Turning Holder for dependable CNMG 1204 clamping — for technical advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: P144TM Compatible Inserts: CNMG 1204 ISO Designation: PCLNL 3232 Additional Designation: P12 Overall Length: 170 mm Shank Width: 32 mm Shank Height: 32 mm Schneidekopf Breite: 40 mm Cutting Angle: 95° Cutting Direction: left Weight: 1.429 kg GTIN: 4061905149887 EClass: 21181004 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Klemmhalter Turning Holder from Teknik Makina? The Klemmhalter Turning Holder by Teknik Makina is designed for CNMG 1204 indexable inserts, providing precise seating and compatibility with standard CNMG geometries. Is this Turning Holder suitable for left-hand operations only? Yes, the Teknik Makina Klemmhalter Turning Holder is specified for left-hand Cutting Direction and is optimised for stable engagement in such turning applications. What are the key dimensions to check for turret compatibility? Check the Holder’s Overall Length of 170 mm and the Shank dimensions of 32 x 32 mm; these values ensure the Teknik Makina Turning Holder fits common turret setups that accept PCLNL-style toolholders. Can METAV Werkzeuge advise on integrating this Klemmhalter into my toolline? Absolutely, METAV Werkzeuge offers competent technical consultation for the Teknik Makina Klemmhalter Turning Holder—contact them at info@metav-werkzeuge.com or +49 2822 7131930 for tailored support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#P144TM","sku":"P144TM","mpn":"PCLNL 3232","gtin13":"4061905149887","name":"Turning Holder PCLNL 3232 95° PCLN for CNMG Indexable Inserts","description":"170 mm turning holder for CNMG 1204 indexable inserts, 95° cutting angle, left-hand, 32×32 mm head, aluminium construction.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/07/8d/e2/62/62e28d07530023baaa126af2/p136tm-main.jpg"],"author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"PCLN for CNMG Indexable Inserts"},{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"Left-Hand Cutting Tools"}],"mentions":[{"@type":"Thing","name":"CNMG 1204 Inserts"},{"@type":"Thing","name":"P12"},{"@type":"Thing","name":"32 mm Width Head"}],"additionalProperty":[{"@type":"PropertyValue","name":"Overall length","value":"170 mm"},{"@type":"PropertyValue","name":"Compatible inserts","value":"CNMG 1204"},{"@type":"PropertyValue","name":"ISO designation","value":"PCLNL 3232"},{"@type":"PropertyValue","name":"Head width","value":"32 mm"},{"@type":"PropertyValue","name":"Head height","value":"32 mm"},{"@type":"PropertyValue","name":"Cutting head width","value":"40 mm"},{"@type":"PropertyValue","name":"Cutting angle","value":"95°"},{"@type":"PropertyValue","name":"Cutting direction","value":"Left-hand"},{"@type":"PropertyValue","name":"Weight","value":"1.429 kg"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"}],"image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/07/8d/e2/62/62e28d07530023baaa126af2/p136tm-main.jpg"],"dateModified":"2026-04-16T12:00:00+01:00"},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What is the overall length of the holder?","acceptedAnswer":{"@type":"Answer","text":"Overall length 170 mm."}},{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with CNMG 1204 indexable inserts."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 95°."}},{"@type":"Question","name":"Is the holder left- or right-hand?","acceptedAnswer":{"@type":"Answer","text":"This is a left-hand holder."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation PCLNL 3232."}},{"@type":"Question","name":"What are the head dimensions?","acceptedAnswer":{"@type":"Answer","text":"Head width 32 mm and head height 32 mm."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder PCLNL 3232"},{"@type":"Thing","name":"Teknik Makina Tooling"}],"mentions":[{"@type":"Thing","name":"CNMG 1204 Inserts"}]}]}

€56.00

170mm PCLN Turning Holder for CNMG 1204 Inserts, 95° - Teknik Makina

Turning Holder PCLNR 3232 for CNMG 1204 Indexable Inserts by Teknik Makina The Turning Holder PCLNR 3232 is a robust tool holder designed for precision turning with CNMG 1204 indexable inserts on CNC lathes and manual turning machines. PCLNR 3232 ISO design ensures secure clamping Compatible with CNMG 1204 indexable inserts 170 mm overall length for stable overhang 95° cutting angle for consistent chip control Right-hand orientation for standard turning operations Precision clamping for repeatable results The Turning Holder PCLNR 3232 combines a proven ISO PCLNR 3232 configuration with a focus on Secure Clamping to minimise vibration and ensure repeatable tool position. By accepting CNMG 1204 indexable inserts, the holder allows quick insert changes and consistent tool geometry, which supports stable cutting performance and predictable surface quality. This results in fewer setup iterations and more efficient production runs. Compact dimensions that improve rigidity With an overall Length of 170 mm, a Width of 32 mm and a Height of 32 mm, the holder is engineered to reduce overhang and increase stiffness during turning operations. The Cutting Head Width of 40 mm and a Cutting Height of 30 mm contribute to a rigid interface between insert and holder, helping to extend Insert Life and improve dimensional accuracy. The specified proportions are particularly beneficial where reduced deflection is required. Practical orientation and everyday workshop use Designed for right-hand cutting, the holder's Right-hand configuration and 95° Cutting Angle enable predictable chip flow and clearance for many standard turning tasks. The straightforward ISO mount simplifies retrofitting into existing toolposts and turret systems. If additional technical data or advice is needed to verify fitment or application, METAV Werkzeuge offers competent consultation to support selection and integration. Compatibility explained for quick understanding This holder is specified for CNMG 1204 indexable inserts, indicating the compatible insert Geometry and Seat Dimensions used with many turning applications. The ISO designation PCLNR 3232 identifies the holder style and clamping method as provided by the Manufacturer. For users less familiar with holder nomenclature, the key takeaway is: this product supports widely used CNMG inserts and provides a stable, ISO-standard mounting for efficient turning operations. Strong recommendation: The Turning Holder from Teknik Makina is an excellent choice when stable, repeatable turning is required — for further technical advice or to confirm suitability, contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Bezeichnung: Turning Holder Brand: Teknik Makina SKU: P134TM Alternate designation: PCLN for CNMG Indexable Inserts Compatible inserts: CNMG 1204 Overall length: 170 mm Weight: 1.429 kg ISO designation: PCLNR 3232 Secondary designation: P12 Width: 32 mm Height: 32 mm Cutting head width: 40 mm Cutting height: 30 mm Cutting direction: right Cutting angle: 95° GTIN: 4061905149849 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder PCLNR 3232 by Teknik Makina and what does that mean? The Turning Holder PCLNR 3232 by Teknik Makina is designed for CNMG 1204 indexable inserts, which means the holder accepts inserts with that seat and thickness specification to ensure correct clamping and cutting geometry. Is the Turning Holder PCLNR 3232 suitable for CNC lathe use? Yes, the Turning Holder PCLNR 3232 from Teknik Makina is suitable for CNC lathe operations; its 170 mm overall length and rigid ISO design provide the stability needed for precision turning tasks. Can the Turning Holder PCLNR 3232 be used for left-hand turning? The Turning Holder PCLNR 3232 by Teknik Makina is specified with a right-hand cutting direction; for left-hand operations, a corresponding left-hand holder should be selected. Where can I get technical support for the Turning Holder PCLNR 3232 from Teknik Makina? For technical support or to confirm that the Turning Holder PCLNR 3232 by Teknik Makina meets specific application requirements, contact METAV Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930. 170mm PCLN Turning Holder for CNMG 1204 Inserts, 95° - Teknik Makina

€56.00

170mm PDJNR 3232 Turning Holder for DNMG 1506, 93° right, with internal coolant - Teknik Makina

Turning Holder PDJNR 3232 — Clamping Holder for DNMG 1506 Indexable Inserts by Teknik Makina A Turning Holder PDJNR 3232 engineered for DNMG 1506 indexable inserts, providing robust clamping and precise right-hand cutting at a 93° angle. Compatible with DNMG 1506 indexable inserts Overall length 170 mm for extended reach Right-hand cutting with 93° cutting angle Internal coolant for improved tool life ISO designation PDJNR 3232 for straightforward selection Precision Clamping for Consistent Turning Results The PDJNR 3232 design focuses on secure clamping to minimize vibration and maintain repeatable tolerances. With a solid clamping geometry and a 40 mm cutting-head width, this holder stabilizes the insert during heavy cuts so operators achieve consistent surface finish and dimensional accuracy. The direct benefit is fewer rejects and extended insert life, translating into measurable productivity gains on turning operations. Built for Productivity and Simple Setup This clamping holder, with an overall length of 170 mm and a 32 mm width and height, offers a balance of reach and rigidity that supports medium-duty to demanding turning tasks. The right-hand cutting orientation and 93° cutting angle provide predictable chip flow and accessibility in common setups. Users will appreciate the straightforward ISO PDJNR 3232 interface that simplifies tooling changes and reduces machine downtime. Ideal for Professional Workshops and Job Shops Designed by Teknik Makina, this Turning Holder suits machinists, toolroom technicians and production shops that use DNMG 1506 inserts and require reliable, repeatable setups. The compact dimensions and robust construction mean the holder is appropriate for serial production as well as repair and maintenance work where dependability and compatibility are priorities. Installation, Cooling and Compatibility Notes The holder is supplied with internal coolant capability, allowing through-tool coolant to reach the cutting zone and improve chip evacuation and tool life. It is explicitly matched to DNMG 1506 inserts and marked with the ISO code PDJNR 3232; ensure the insert geometry and clamping screw match your existing tooling. Right-hand cutting orientation must be selected for corresponding lathe setups to achieve intended cutting direction and chip control. Trust Teknik Makina’s Turning Holder PDJNR 3232 for robust, high-precision turning—for personalised technical advice and assistance contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Specifications Bezeichnung: Turning Holder Marke: Teknik Makina SKU: P114TM ISO designation: PDJNR 3232 Compatible inserts: DNMG 1506 Overall length: 170 mm Weight: 1.384 kg Internal coolant: with internal coolant Secondary designation: P15 Width: 32 mm Height: 32 mm Cutting head width: 40 mm Cutting direction: right Cutting angle: 93° GTIN: 4061905149771 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder PDJNR 3232 from Teknik Makina? The Turning Holder PDJNR 3232 by Teknik Makina is designed to accept DNMG 1506 indexable inserts; ensure the insert size and chipbreaker match your application for optimal performance. Does the Teknik Makina Turning Holder PDJNR 3232 support coolant-through operation? Yes, the Teknik Makina Turning Holder PDJNR 3232 includes internal coolant capability to improve chip evacuation and tool life when used with appropriate machine coolant supply. Is the PDJNR 3232 suitable for heavy-duty turning operations? The PDJNR 3232 Turning Holder from Teknik Makina, with its 170 mm length and robust clamping geometry, is suited for medium to heavy-duty tasks where rigidity and reliable insert clamping are required. Who can help if I need technical advice for the Turning Holder PDJNR 3232? METAV Werkzeuge offers detailed consultation for the Turning Holder PDJNR 3232 by Teknik Makina; contact info@metav-werkzeuge.com or call +49 2822 7131930 for application support. 170mm PDJNR 3232 Turning Holder for DNMG 1506, 93° Right, Internal Coolant - Teknik Makina

€56.00

170mm SVJB for VBMT 1604, 93° cutting angle, right-hand — Teknik Makina

Klemmhalter (Turning Holder) by Teknik Makina The Klemmhalter (Turning Holder) is a precision toolholder designed for machining with VBMT 1604 indexable inserts, offering stable clamping and consistent cutting performance for turning applications. Compatible with VBMT 1604 indexable inserts Overall Length 170 mm for stable overhang ISO SVJBR 3232 clamping design 93° Cutting Angle for precise turning Right-hand orientation with robust construction Engineered for dependable indexable insert turning The holder is engineered to secure VBMT 1604 inserts with repeatable accuracy, reducing setup time and ensuring consistent tool geometry across batches. Its clamping concept, based on the SVJBR 3232 ISO designation, provides firm seating of the insert and reliable bite during interrupted cuts. This leads to improved process stability and fewer rejects in series production for workshops and contract manufacturers. Geometry that improves surface finish and tool life A defined 93° Cutting Angle and a 40 mm Schneidekopf width contribute to predictable chip flow and reduced cutting forces. By translating these geometric features into lower vibration and better heat distribution, operators achieve a finer surface finish with less rework. This technical configuration supports efficient material removal while helping extend the life of both the insert and the holder. Compact dimensions with high rigidity With an Overall Length of 170 mm and body dimensions of 32 mm width and 32 mm height, the holder balances accessibility and stiffness for a wide range of turning tasks. The compact profile minimizes overhang while providing the necessary clearance for close-to-shoulder machining. As a consequence, tool deflection is reduced and repeatability in tight-tolerance operations is enhanced. Designed for professional workshops and demanding applications This Turning Holder is aimed at machinists, toolroom technicians and small to medium production environments that require reliable indexable insert solutions. The right-hand orientation and robust construction make the component suitable for general-purpose turning as well as tougher interrupted-cut conditions. For customized setups or compatibility checks with specific inserts or machines, support is available from the supplier. Choose the Teknik Makina Klemmhalter for precise, repeatable turning performance and contact METAV Werkzeuge for individual technical advice and application support — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Data Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D238-1TM For Indexable Inserts: VBMT 1604 Suitable Inserts: VBMT 1604 Overall Length: 170 mm Weight: 1.37 kg ISO Designation: SVJBR 3232 Secondary Designation: P16 Width: 32 mm Height: 32 mm Schneidekopf Width: 40 mm Cutting Direction: right Cutting Angle: 93° GTIN: 4061905153662 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts are compatible with the Klemmhalter by Teknik Makina Turning Holder? The Klemmhalter by Teknik Makina is compatible with VBMT 1604 indexable inserts and is specifically designed to hold these inserts securely in an SVJBR 3232 clamping arrangement for consistent machining. Can the Klemmhalter Turning Holder be used for heavy interrupted cuts? Yes, the Teknik Makina Klemmhalter Turning Holder has a robust construction, a compact 170 mm length and a 93° cutting angle, which together support good rigidity and make it suitable for many interrupted-cut scenarios. How does the SVJBR 3232 designation affect use of the Klemmhalter? The SVJBR 3232 designation defines the clamp geometry and seating for the Klemmhalter; this ensures correct seating of VBMT 1604 inserts and helps maintain repeatable cutting geometry during production. Where can I get technical advice or check machine compatibility for the Klemmhalter? For tailored technical advice regarding the Klemmhalter Turning Holder by Teknik Makina, contact METAV Werkzeuge — eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 — their team provides competent consultation for tool selection and application. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D238-1TM","sku":"D238-1TM","mpn":"D238-1TM","gtin13":"4061905153662","name":"Turning Holder SVJBR 3232 93° VBMT 1604","description":"SVJB for VBMT indexable inserts; 170 mm overall length, 93° cutting angle, right-hand, aluminium construction; suitable for VBMT 1604 inserts.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/43/07/35/64/64350743edeb9298707ad03d/d230tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2a/7e/de/62/62de7e2a0f56dbb4de4dbeea/d230tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/ce/7e/de/62/62de7ece33927e49dbf32777/d230tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For Inserts","value":"VBMT 1604"},{"@type":"PropertyValue","name":"Overall Length","value":"170 mm"},{"@type":"PropertyValue","name":"Weight","value":"1.37 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"SVJBR 3232"},{"@type":"PropertyValue","name":"Type","value":"SVJB for VBMT Indexable Inserts"},{"@type":"PropertyValue","name":"Shank","value":"P16"},{"@type":"PropertyValue","name":"Width","value":"32 mm"},{"@type":"PropertyValue","name":"Height","value":"32 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"40 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"93°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"right"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"VBMT 1604 inserts fit this holder."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 170 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 93°."}},{"@type":"Question","name":"Is the holder right- or left-hand?","acceptedAnswer":{"@type":"Answer","text":"The holder is right-hand."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation is SVJBR 3232."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder SVJBR 3232"},{"@type":"Thing","name":"Allround Turning Applications"},{"@type":"Thing","name":"Compatible with VBMT 1604"}],"mentions":[{"@type":"Thing","name":"P16 Shank"},{"@type":"Thing","name":"SVJB for VBMT Indexable Inserts"},{"@type":"Thing","name":"93° Cutting Angle"}]}]}

€44.00

Precision coolant delivery for demanding turning operations

Tool holders with internal coolant are precision components used in machining, particularly turning, to hold indexable inserts securely and feed them to the workpiece. Also referred to as through-coolant tool holders or internal coolant toolholders, these systems channel coolant directly to the cutting edge to reduce thermal load and improve chip control in heavy or high-speed machining.

How they work and where they help most

Standard holders without internal coolant rely on external nozzles, which can be blocked by chips and fail to reach the insert tip reliably. In contrast, holders with internal coolant contain integrated coolant channels and boreholes in the tool shank that guide the coolant under pressure straight to the insert. This targeted supply is particularly valuable for difficult-to-machine materials, high cutting speeds, deep cuts and internal turning where conventional coolant delivery struggles.

Key facts

characteristic	detail
category	tool holders with internal coolant
common synonyms	internal coolant toolholders; coolant-through tool holders
typical application	turning, heavy machining, internal bore finishing
coolant routing	internal channels and boreholes delivering coolant to the insert seat
key technical effect	direct cooling at the cutting edge, improved chip evacuation, reduced thermal load
comparison	standard holders use external nozzles; internal coolant holders route coolant through the shank

Measurable benefits for production

Direct coolant feed reduces the thermal stress on the insert, extending tool life.
Improved pressure at the cutting zone enhances chip evacuation, reducing recutting and tool damage.
More consistent cooling helps achieve better surface finish and dimensional stability.
Reliable coolant delivery under challenging chip conditions supports higher cutting speeds and heavier cuts.

Metav: precision supply and industrial competence

Metav positions itself as the practical partner for workshops and production: a European quality filter based in Emmerich that combines broad product availability with technical expertise. With over 48,000 customers and more than 250,000 products, Metav supplies through-coolant tool holders and related accessories with dependable logistics and application guidance, making sophisticated cooling solutions accessible for every workshop.

In short

Tool holders with internal coolant deliver targeted, high-efficiency coolant to the insert tip, improving chip control, tool life and surface quality in demanding turning tasks.

FAQ

When should I choose tool holders with internal coolant over standard holders?
Choose tool holders with internal coolant when external coolant nozzles cannot reliably reach the cutting edge, for deep cuts, internal turning, heavy machining or when machining difficult materials at high speeds. The internal coolant toolholders ensure direct cooling and better chip evacuation in these scenarios.

Can internal coolant toolholders be used with all insert types?
Internal coolant toolholders are compatible with most indexable inserts provided the holder and insert interface are specified for coolant-through operation. Verify seat type and manufacturer recommendations for coolant-through compatibility.

What performance improvements can I expect from coolant-through tool holders?
Typical improvements include longer tool life, fewer interruptions from clogged external nozzles, improved chip control and a more consistent surface finish due to reduced thermal distortion at the cutting edge.

How is coolant delivered inside an internal coolant toolholder?
Coolant is channelled through boreholes and internal passages in the tool shank directly to the insert pocket; this focused path creates sufficient pressure at the cutting edge to flush chips away and cool the insert effectively.

Fragen zu diesen Produkten??

Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.

Tel.: +49 2822 7131930

Mail: info@metav-werkzeuge.com

High-precision clamping holders with internal coolant for extended tool life

Filter products

Precision coolant delivery for demanding turning operations

How they work and where they help most

Key facts

Measurable benefits for production

Metav: precision supply and industrial competence

In short

FAQ

Fragen zu diesen Produkten??